@inproceedings{EppleeLangbehn2021, author = {Eppl{\´e}e, Rafael and Langbehn, Eike}, title = {Overlapping Architecture: Implementation of Impossible Spaces in Virtual Reality Games}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-246045}, pages = {37-46}, year = {2021}, abstract = {Natural walking in virtual reality games is constrained by the physical boundaries defined by the size of the player's tracking space. Impossible spaces, a redirected walking technique, enlarge the virtual environment by creating overlapping architecture and letting multiple locations occupy the same physical space. Within certain thresholds, this is subtle to the player. In this paper, we present our approach to implement such impossible spaces and describe how we handled challenges like objects with simulated physics or precomputed global illumination.}, language = {en} } @article{FathyDarwishAbdelhamidetal.2022, author = {Fathy, Moustafa and Darwish, Mostafa A. and Abdelhamid, Al-Shaimaa M. and Alrashedy, Gehad M. and Othman, Othman Ali and Naseem, Muhammad and Dandekar, Thomas and Othman, Eman M.}, title = {Kinetin ameliorates cisplatin-induced hepatotoxicity and lymphotoxicity via attenuating oxidative damage, cell apoptosis and inflammation in rats}, series = {Biomedicines}, volume = {10}, journal = {Biomedicines}, number = {7}, issn = {2227-9059}, doi = {10.3390/biomedicines10071620}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-281686}, year = {2022}, abstract = {Though several previous studies reported the in vitro and in vivo antioxidant effect of kinetin (Kn), details on its action in cisplatin-induced toxicity are still scarce. In this study we evaluated, for the first time, the effects of kinetin in cisplatin (cp)- induced liver and lymphocyte toxicity in rats. Wistar male albino rats were divided into nine groups: (i) the control (C), (ii) groups 2,3 and 4, which received 0.25, 0.5 and 1 mg/kg kinetin for 10 days; (iii) the cisplatin (cp) group, which received a single intraperitoneal injection of CP (7.0 mg/kg); and (iv) groups 6, 7, 8 and 9, which received, for 10 days, 0.25, 0.5 and 1 mg/kg kinetin or 200 mg/kg vitamin C, respectively, and Cp on the fourth day. CP-injected rats showed a significant impairment in biochemical, oxidative stress and inflammatory parameters in hepatic tissue and lymphocytes. PCR showed a profound increase in caspase-3, and a significant decline in AKT gene expression. Intriguingly, Kn treatment restored the biochemical, redox status and inflammatory parameters. Hepatic AKT and caspase-3 expression as well as CD95 levels in lymphocytes were also restored. In conclusion, Kn mitigated oxidative imbalance, inflammation and apoptosis in CP-induced liver and lymphocyte toxicity; therefore, it can be considered as a promising therapy.}, language = {en} } @phdthesis{Fehler2010, author = {Fehler, Manuel}, title = {Kalibrierung Agenten-basierter Simulationen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-64762}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2010}, abstract = {In der vorliegenden Arbeit wird das Problem der Kalibrierung Agenten-basierter Simulationen (ABS) behandelt, also das Problem, die Parameterwerte eines Agenten-basierten Simulationsmodells so einzustellen, dass valides Simulationsverhalten erreicht wird. Das Kalibrierungsproblem f{\"u}r Simulationen an sich ist nicht neu und ist im Rahmen klassischer Simulationsparadigmen, wie z.B. der Makro-Simulation, fester Bestandteil der Forschung. Im Vergleich zu den dort betrachteten Kalibrierungsproblemen zeichnet sich das Kalibrierungsproblem f{\"u}r ABS jedoch durch eine Reihe zus{\"a}tzlicher Herausforderungen aus, welche die direkte Anwendung existierender Kalibrierungsverfahren in begrenzter Zeit erschweren, bzw. nicht mehr sinnvoll zulassen. Die L{\"o}sung dieser Probleme steht im Zentrum dieser Dissertation: Das Ziel besteht darin, den Nutzer bei der Kalibrierung von ABS auf der Basis von unzureichenden, potentiell fehlerhaften Daten und Wissen zu unterst{\"u}tzen. Dabei sollen drei Hauptprobleme gel{\"o}st werden: 1)Vereinfachung der Kalibrierung großer Agenten-Parametermengen auf der Mikro- Ebene in Agenten-basierten Simulationen durch Ausnutzung der spezifischen Struktur von ABS (n{\"a}mlich dem Aufbau aus einer Menge von Agentenmodellen). 2)Kalibrierung Agenten-basierter Simulationen, so dass auf allen relevanten Beobachtungsebenen valides Simulationsverhalten erzeugt wird (mindestens Mikro und Makro-Ebene). Als erschwerende Randbedingung muss die Kalibrierung unter der Voraussetzung einer Makro-Mikro-Wissensl{\"u}cke durchgef{\"u}hrt werden. 3)Kalibrierung Agenten-basierter Simulationen auf der Mikro-Ebene unter der Voraussetzung, dass zur Kalibrierung einzelner Agentenmodelle nicht ausreichend und potentiell verf{\"a}lschte Daten zur Verhaltensvalidierung zur Verf{\"u}gung stehen. Hierzu wird in dieser Arbeit das sogenannte Makro-Mikro-Verfahren zur Kalibrierung von Agenten-basierten Simulationen entwickelt. Das Verfahren besteht aus einem Basisverfahren, das im Verlauf der Arbeit um verschiedene Zusatzverfahren erweitert wird. Das Makro-Mikro-Verfahren und seine Erweiterungen sollen dazu dienen, die Modellkalibrierung trotz stark verrauschter Daten und eingeschr{\"a}nktem Wissen {\"u}ber die Wirkungszusammenh{\"a}nge im Originalsystem geeignet zu erm{\"o}glichen und dabei den Kalibrierungsprozess zu beschleunigen: 1) Makro-Mikro-Kalibrierungsverfahren: Das in dieser Arbeit entwickelte Makro- Mikro-Verfahren unterst{\"u}tzt den Nutzer durch eine kombinierte Kalibrierung auf der Mikro- und der Makro-Beobachtungsebene, die gegebenenfalls durch Zwischenebenen erweitert werden kann. Der Grundgedanke des Verfahrens besteht darin, das Kalibrierungsproblem in eines auf aggregierter Verhaltensebene und eines auf der Ebene des Mikro-Agentenverhaltens aufzuteilen. Auf der Makro-Ebene wird nach validen idealen aggregierten Verhaltensmodellen (IVM) der Agenten gesucht. Auf der Mikro-Ebene wird versucht die individuellen Modelle der Agenten auf Basis des erw{\"u}nschten Gesamtverhaltens und der ermittelten IVM so zu kalibrieren, das insgesamt Simulationsverhalten entsteht, das sowohl auf Mikro- als auch auf Makro-Ebene valide ist. 2) Erweiterung 1: Robuste Kalibrierung: Um den Umgang mit potentiell verrauschten Validierungskriterien (d.h. mit verrauschten Daten {\"u}ber ein Originalsystem, auf denen die Validierungskriterien der Simulation beruhen) und Modellteilen w{\"a}hrend der Kalibrierung von ABS zu erm{\"o}glichen, wird eine robuste Kalibrierungstechnik zur Anwendung im Makro-Mikro-Verfahren entwickelt. 3) Erweiterung 2: Kalibrierung mit Heterogenit{\"a}tssuche: Als zweite Erweiterung des Makro-Mikro-Verfahrens wird ein Verfahren entwickelt, das das Problem des unklaren Detaillierungsgrades von ABS auf der Ebene der Parameterwerte adressiert. Prinzipiell kann zwar jeder Agent unterschiedliche Parameterwerte verwenden, obwohl eine geringere Heterogenit{\"a}t zur Erzeugung validen Verhaltens ausreichend w{\"a}re. Die entwickelte Erweiterung versucht, w{\"a}hrend der Kalibrierung, eine geeignete Heterogenit{\"a}tsauspr{\"a}gung f{\"u}r die Parameterwerte der Agenten zu ermitteln. Unter einer Heterogenit{\"a}tsauspr{\"a}gung wird dabei eine Einteilung der simulierten Agenten in Gruppen mit jeweils gleichen Parameterwerten verstanden. Die Heterogenit{\"a}tssuche dient dazu, einen Kompromiss zu finden zwischen der Notwendigkeit, sehr große Parametersuchr{\"a}ume durchsuchen zu m{\"u}ssen und gleichzeitig den Suchraum so klein wie m{\"o}glich halten zu wollen.}, subject = {Computersimulation}, language = {de} } @misc{Feineis2008, type = {Master Thesis}, author = {Feineis, Markus}, title = {Wortgenaue Annotation digitalisierter mittelalterlicher Handschriften}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-30448}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {No abstract available}, subject = {Annotation}, language = {de} } @phdthesis{Fink2014, author = {Fink, Martin}, title = {Crossings, Curves, and Constraints in Graph Drawing}, publisher = {W{\"u}rzburg University Press}, isbn = {978-3-95826-002-3 (print)}, doi = {10.25972/WUP-978-3-95826-003-0}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-98235}, school = {W{\"u}rzburg University Press}, pages = {222}, year = {2014}, abstract = {In many cases, problems, data, or information can be modeled as graphs. Graphs can be used as a tool for modeling in any case where connections between distinguishable objects occur. Any graph consists of a set of objects, called vertices, and a set of connections, called edges, such that any edge connects a pair of vertices. For example, a social network can be modeled by a graph by transforming the users of the network into vertices and friendship relations between users into edges. Also physical networks like computer networks or transportation networks, for example, the metro network of a city, can be seen as graphs. For making graphs and, thereby, the data that is modeled, well-understandable for users, we need a visualization. Graph drawing deals with algorithms for visualizing graphs. In this thesis, especially the use of crossings and curves is investigated for graph drawing problems under additional constraints. The constraints that occur in the problems investigated in this thesis especially restrict the positions of (a part of) the vertices; this is done either as a hard constraint or as an optimization criterion.}, subject = {Graphenzeichnen}, language = {en} } @article{FischerHarteltPuppe2023, author = {Fischer, Norbert and Hartelt, Alexander and Puppe, Frank}, title = {Line-level layout recognition of historical documents with background knowledge}, series = {Algorithms}, volume = {16}, journal = {Algorithms}, number = {3}, issn = {1999-4893}, doi = {10.3390/a16030136}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-310938}, year = {2023}, abstract = {Digitization and transcription of historic documents offer new research opportunities for humanists and are the topics of many edition projects. However, manual work is still required for the main phases of layout recognition and the subsequent optical character recognition (OCR) of early printed documents. This paper describes and evaluates how deep learning approaches recognize text lines and can be extended to layout recognition using background knowledge. The evaluation was performed on five corpora of early prints from the 15th and 16th Centuries, representing a variety of layout features. While the main text with standard layouts could be recognized in the correct reading order with a precision and recall of up to 99.9\%, also complex layouts were recognized at a rate as high as 90\% by using background knowledge, the full potential of which was revealed if many pages of the same source were transcribed.}, language = {en} } @article{FisselerMuellerWeichert2017, author = {Fisseler, Denis and M{\"u}ller, Gerfrid G. W. and Weichert, Frank}, title = {Web-Based scientific exploration and analysis of 3D scanned cuneiform datasets for collaborative research}, series = {Informatics}, volume = {4}, journal = {Informatics}, number = {4}, issn = {2227-9709}, doi = {10.3390/informatics4040044}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-197958}, pages = {44}, year = {2017}, abstract = {The three-dimensional cuneiform script is one of the oldest known writing systems and a central object of research in Ancient Near Eastern Studies and Hittitology. An important step towards the understanding of the cuneiform script is the provision of opportunities and tools for joint analysis. This paper presents an approach that contributes to this challenge: a collaborative compatible web-based scientific exploration and analysis of 3D scanned cuneiform fragments. The WebGL -based concept incorporates methods for compressed web-based content delivery of large 3D datasets and high quality visualization. To maximize accessibility and to promote acceptance of 3D techniques in the field of Hittitology, the introduced concept is integrated into the Hethitologie-Portal Mainz, an established leading online research resource in the field of Hittitology, which until now exclusively included 2D content. The paper shows that increasing the availability of 3D scanned archaeological data through a web-based interface can provide significant scientific value while at the same time finding a trade-off between copyright induced restrictions and scientific usability.}, language = {en} } @phdthesis{Fleszar2018, author = {Fleszar, Krzysztof}, title = {Network-Design Problems in Graphs and on the Plane}, edition = {1. Auflage}, publisher = {W{\"u}rzburg University Press}, address = {W{\"u}rzburg}, isbn = {978-3-95826-076-4 (Print)}, doi = {10.25972/WUP-978-3-95826-077-1}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-154904}, school = {W{\"u}rzburg University Press}, pages = {xi, 204}, year = {2018}, abstract = {A network design problem defines an infinite set whose elements, called instances, describe relationships and network constraints. It asks for an algorithm that, given an instance of this set, designs a network that respects the given constraints and at the same time optimizes some given criterion. In my thesis, I develop algorithms whose solutions are optimum or close to an optimum value within some guaranteed bound. I also examine the computational complexity of these problems. Problems from two vast areas are considered: graphs and the Euclidean plane. In the Maximum Edge Disjoint Paths problem, we are given a graph and a subset of vertex pairs that are called terminal pairs. We are asked for a set of paths where the endpoints of each path form a terminal pair. The constraint is that any two paths share at most one inner vertex. The optimization criterion is to maximize the cardinality of the set. In the hard-capacitated k-Facility Location problem, we are given an integer k and a complete graph where the distances obey a given metric and where each node has two numerical values: a capacity and an opening cost. We are asked for a subset of k nodes, called facilities, and an assignment of all the nodes, called clients, to the facilities. The constraint is that the number of clients assigned to a facility cannot exceed the facility's capacity value. The optimization criterion is to minimize the total cost which consists of the total opening cost of the facilities and the total distance between the clients and the facilities they are assigned to. In the Stabbing problem, we are given a set of axis-aligned rectangles in the plane. We are asked for a set of horizontal line segments such that, for every rectangle, there is a line segment crossing its left and right edge. The optimization criterion is to minimize the total length of the line segments. In the k-Colored Non-Crossing Euclidean Steiner Forest problem, we are given an integer k and a finite set of points in the plane where each point has one of k colors. For every color, we are asked for a drawing that connects all the points of the same color. The constraint is that drawings of different colors are not allowed to cross each other. The optimization criterion is to minimize the total length of the drawings. In the Minimum Rectilinear Polygon for Given Angle Sequence problem, we are given an angle sequence of left (+90°) turns and right (-90°) turns. We are asked for an axis-parallel simple polygon where the angles of the vertices yield the given sequence when walking around the polygon in counter-clockwise manner. The optimization criteria considered are to minimize the perimeter, the area, and the size of the axis-parallel bounding box of the polygon.}, subject = {Euklidische Ebene}, language = {en} } @phdthesis{Freiberg2015, author = {Freiberg, Martina}, title = {UI-, User-, \& Usability-Oriented Engineering of Participative Knowledge-Based Systems}, publisher = {W{\"u}rzburg University Press}, isbn = {978-3-95826-012-2 (print)}, doi = {10.25972/WUP-978-3-95826-013-9}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-106072}, school = {W{\"u}rzburg University Press}, pages = {232}, year = {2015}, abstract = {Knowledge-based systems (KBS) face an ever-increasing interest in various disciplines and contexts. Yet, the former aim to construct the 'perfect intelligent software' continuously shifts to user-centered, participative solutions. Such systems enable users to contribute their personal knowledge to the problem solving process for increased efficiency and an ameliorated user experience. More precisely, we define non-functional key requirements of participative KBS as: Transparency (encompassing KBS status mediation), configurability (user adaptability, degree of user control/exploration), quality of the KB and UI, and evolvability (enabling the KBS to grow mature with their users). Many of those requirements depend on the respective target users, thus calling for a more user-centered development. Often, also highly expertise domains are targeted — inducing highly complex KBs — which requires a more careful and considerate UI/interaction design. Still, current KBS engineering (KBSE) approaches mostly focus on knowledge acquisition (KA) This often leads to non-optimal, little reusable, and non/little evaluated KBS front-end solutions. In this thesis we propose a more encompassing KBSE approach. Due to the strong mutual influences between KB and UI, we suggest a novel form of intertwined UI and KB development. We base the approach on three core components for encompassing KBSE: (1) Extensible prototyping, a tailored form of evolutionary prototyping; this builds on mature UI prototypes and offers two extension steps for the anytime creation of core KBS prototypes (KB + core UI) and fully productive KBS (core KBS prototype + common framing functionality). (2) KBS UI patterns, that define reusable solutions for the core KBS UI/interaction; we provide a basic collection of such patterns in this work. (3) Suitable usability instruments for the assessment of the KBS artifacts. Therewith, we do not strive for 'yet another' self-contained KBS engineering methodology. Rather, we motivate to extend existing approaches by the proposed key components. We demonstrate this based on an agile KBSE model. For practical support, we introduce the tailored KBSE tool ProKEt. ProKEt offers a basic selection of KBS core UI patterns and corresponding configuration options out of the box; their further adaption/extension is possible on various levels of expertise. For practical usability support, ProKEt offers facilities for quantitative and qualitative data collection. ProKEt explicitly fosters the suggested, intertwined development of UI and KB. For seamlessly integrating KA activities, it provides extension points for two selected external KA tools: For KnowOF, a standard office based KA environment. And for KnowWE, a semantic wiki for collaborative KA. Therewith, ProKEt offers powerful support for encompassing, user-centered KBSE. Finally, based on the approach and the tool, we also developed a novel KBS type: Clarification KBS as a mashup of consultation and justification KBS modules. Those denote a specifically suitable realization for participative KBS in highly expertise contexts and consequently require a specific design. In this thesis, apart from more common UI solutions, we particularly also introduce KBS UI patterns especially tailored towards Clarification KBS.}, subject = {Wissensbasiertes System}, language = {en} } @techreport{FundaKonheiserGermanetal.2023, type = {Working Paper}, author = {Funda, Christoph and Konheiser, Tobias and German, Reinhard and Hielscher, Kai-Steffen}, title = {How to Model and Predict the Scalability of a Hardware-In-The-Loop Test Bench for Data Re-Injection?}, series = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, journal = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, doi = {10.25972/OPUS-32215}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322150}, pages = {4}, year = {2023}, abstract = {This paper describes a novel application of an empirical network calculus model based on measurements of a hardware-in-the-loop (HIL) test system. The aim is to predict the performance of a HIL test bench for open-loop re-injection in the context of scalability. HIL test benches are distributed computer systems including software, hardware, and networking devices. They are used to validate complex technical systems, but have not yet been system under study themselves. Our approach is to use measurements from the HIL system to create an empirical model for arrival and service curves. We predict the performance and design the previously unknown parameters of the HIL simulator with network calculus (NC), namely the buffer sizes and the minimum needed pre-buffer time for the playback buffer. We furthermore show, that it is possible to estimate the CPU load from arrival and service-curves based on the utilization theorem, and hence estimate the scalability of the HIL system in the context of the number of sensor streams.}, language = {en} } @techreport{FundaMarinGarciaGermanetal.2023, type = {Working Paper}, author = {Funda, Christoph and Mar{\´i}n Garc{\´i}a, Pablo and German, Reinhard and Hielscher, Kai-Steffen}, title = {Online Algorithm for Arrival \& Service Curve Estimation}, series = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, journal = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, doi = {10.25972/OPUS-32211}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322112}, pages = {5}, year = {2023}, abstract = {This paper presents a novel concept to extend state-of-the-art buffer monitoring with additional measures to estimate service-curves. The online algorithm for service-curve estimation replaces the state-of-the-art timestamp logging, as we expect it to overcome the main disadvantages of generating a huge amount of data and using a lot of CPU resources to store the data to a file during operation. We prove the accuracy of the online-algorithm offline with timestamp data and compare the derived bounds to the measured delay and backlog. We also do a proof-of- concept of the online-algorithm, implement it in LabVIEW and compare its performance to the timestamp logging by CPU load and data-size of the log-file. However, the implementation is still work-in-progress.}, language = {en} } @misc{FunkenTscherner2019, author = {Funken, Matthias and Tscherner, Michael}, title = {Jahresbericht 2018 des Rechenzentrums der Universit{\"a}t W{\"u}rzburg}, edition = {1. Auflage}, organization = {Rechenzentrum (Universit{\"a}t W{\"u}rzburg)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-188265}, pages = {76}, year = {2019}, abstract = {Eine {\"U}bersicht {\"u}ber die Aktivit{\"a}ten des Rechenzentrums im Jahr 2018.}, subject = {Julius-Maximilians-Universit{\"a}t W{\"u}rzburg}, language = {de} } @misc{FunkenTscherner2018, author = {Funken, Matthias and Tscherner, Michael}, title = {Jahresbericht 2017 des Rechenzentrums der Universit{\"a}t W{\"u}rzburg}, edition = {1. Auflage}, organization = {Rechenzentrum (Universit{\"a}t W{\"u}rzburg)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-168537}, pages = {68}, year = {2018}, abstract = {Eine {\"U}bersicht {\"u}ber die Aktivit{\"a}ten des Rechenzentrums im Jahr 2017.}, subject = {Julius-Maximilians-Universit{\"a}t W{\"u}rzburg}, language = {de} } @article{GageikStrohmeierMontenegro2013, author = {Gageik, Nils and Strohmeier, Michael and Montenegro, Sergio}, title = {Waypoint flight parameter comparison of an autonomous UAV}, series = {International Journal of Artificial Intelligence \& Applications (IJAIA)}, journal = {International Journal of Artificial Intelligence \& Applications (IJAIA)}, doi = {10.5121/ijaia.2013.4304}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96833}, year = {2013}, abstract = {The present paper compares the effect of different waypoint parameters on the flight performance of a special autonomous indoor UAV (unmanned aerial vehicle) fusing ultrasonic, inertial, pressure and optical sensors for 3D positioning and controlling. The investigated parameters are the acceptance threshold for reaching a waypoint as well as the maximal waypoint step size or block size. The effect of these parameters on the flight time and accuracy of the flight path is investigated. Therefore the paper addresses how the acceptance threshold and step size influence the speed and accuracy of the autonomous flight and thus influence the performance of the presented autonomous quadrocopter under real indoor navigation circumstances. Furthermore the paper demonstrates a drawback of the standard potential field method for navigation of such autonomous quadrocopters and points to an improvement.}, language = {en} } @article{GageikStrohmeierMontenegro2013, author = {Gageik, Nils and Strohmeier, Michael and Montenegro, Sergio}, title = {An Autonomous UAV with an Optical Flow Sensor for Positioning and Navigation}, series = {International Journal of Advanced Robotic Systems}, journal = {International Journal of Advanced Robotic Systems}, doi = {10.5772/56813}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96368}, year = {2013}, abstract = {A procedure to control all six DOF (degrees of freedom) of a UAV (unmanned aerial vehicle) without an external reference system and to enable fully autonomous flight is presented here. For 2D positioning the principle of optical flow is used. Together with the output of height estimation, fusing ultrasonic, infrared and inertial and pressure sensor data, the 3D position of the UAV can be computed, controlled and steered. All data processing is done on the UAV. An external computer with a pathway planning interface is for commanding purposes only. The presented system is part of the AQopterI8 project, which aims to develop an autonomous flying quadrocopter for indoor application. The focus of this paper is 2D positioning using an optical flow sensor. As a result of the performed evaluation, it can be concluded that for position hold, the standard deviation of the position error is 10cm and after landing the position error is about 30cm.}, language = {en} } @techreport{GallenmuellerScholzStubbeetal.2022, type = {Working Paper}, author = {Gallenm{\"u}ller, Sebastian and Scholz, Dominik and Stubbe, Henning and Hauser, Eric and Carle, Georg}, title = {Reproducible by Design: Network Experiments with pos}, series = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)}, journal = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)}, doi = {10.25972/OPUS-28083}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-280834}, pages = {4}, year = {2022}, abstract = {In scientific research, the independent reproduction of experiments is the source of trust. Detailed documentation is required to enable experiment reproduction. Reproducibility awards were created to honor the increased documentation effort. In this work, we propose a novel approach toward reproducible research—a structured experimental workflow that allows the creation of reproducible experiments without requiring additional efforts of the researcher. Moreover, we present our own testbed and toolchain, namely, plain orchestrating service (pos), which enables the creation of such experimental workflows. The experiment is documented by our proposed, fully scripted experiment structure. In addition, pos provides scripts enabling the automation of the bundling and release of all experimental artifacts. We provide an interactive environment where pos experiments can be executed and reproduced, available at https://gallenmu.github.io/single-server-experiment.}, subject = {Datennetz}, language = {en} } @article{GehrkeBalbachRauchetal.2019, author = {Gehrke, Alexander and Balbach, Nico and Rauch, Yong-Mi and Degkwitz, Andreas and Puppe, Frank}, title = {Erkennung von handschriftlichen Unterstreichungen in Alten Drucken}, series = {Bibliothek Forschung und Praxis}, volume = {43}, journal = {Bibliothek Forschung und Praxis}, number = {3}, issn = {1865-7648}, doi = {10.1515/bfp-2019-2083}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-193377}, pages = {447 -- 452}, year = {2019}, abstract = {Die Erkennung handschriftlicher Artefakte wie Unterstreichungen in Buchdrucken erm{\"o}glicht R{\"u}ckschl{\"u}sse auf das Rezeptionsverhalten und die Provenienzgeschichte und wird auch f{\"u}r eine OCR ben{\"o}tigt. Dabei soll zwischen handschriftlichen Unterstreichungen und waagerechten Linien im Druck (z. B. Trennlinien usw.) unterschieden werden, da letztere nicht ausgezeichnet werden sollen. Im Beitrag wird ein Ansatz basierend auf einem auf Unterstreichungen trainierten Neuronalen Netz gem{\"a}ß der U-Net Architektur vorgestellt, dessen Ergebnisse in einem zweiten Schritt mit heuristischen Regeln nachbearbeitet werden. Die Evaluationen zeigen, dass Unterstreichungen sehr gut erkannt werden, wenn bei der Binarisierung der Scans nicht zu viele Pixel der Unterstreichung wegen geringem Kontrast verloren gehen. Zuk{\"u}nftig sollen die Worte oberhalb der Unterstreichung mit OCR transkribiert werden und auch andere Artefakte wie handschriftliche Notizen in alten Drucken erkannt werden.}, language = {de} } @phdthesis{Geissler2022, author = {Geißler, Stefan}, title = {Performance Evaluation of Next-Generation Data Plane Architectures and their Components}, issn = {1432-8801}, doi = {10.25972/OPUS-26015}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-260157}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {In this doctoral thesis we cover the performance evaluation of next generation data plane architectures, comprised of complex software as well as programmable hardware components that allow fine granular configuration. In the scope of the thesis we propose mechanisms to monitor the performance of singular components and model key performance indicators of software based packet processing solutions. We present novel approaches towards network abstraction that allow the integration of heterogeneous data plane technologies into a singular network while maintaining total transparency between control and data plane. Finally, we investigate a full, complex system consisting of multiple software-based solutions and perform a detailed performance analysis. We employ simulative approaches to investigate overload control mechanisms that allow efficient operation under adversary conditions. The contributions of this work build the foundation for future research in the areas of network softwarization and network function virtualization.}, subject = {Leistungsbewertung}, language = {en} } @phdthesis{Glasser2001, author = {Glaßer, Christian}, title = {Forbidden-Patterns and Word Extensions for Concatenation Hierarchies}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-1179153}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2001}, abstract = {Starfree regular languages can be build up from alphabet letters by using only Boolean operations and concatenation. The complexity of these languages can be measured with the so-called dot-depth. This measure leads to concatenation hierarchies like the dot-depth hierarchy (DDH) and the closely related Straubing-Th{\´e}rien hierarchy (STH). The question whether the single levels of these hierarchies are decidable is still open and is known as the dot-depth problem. In this thesis we prove/reprove the decidability of some lower levels of both hierarchies. More precisely, we characterize these levels in terms of patterns in finite automata (subgraphs in the transition graph) that are not allowed. Therefore, such characterizations are called forbidden-pattern characterizations. The main results of the thesis are as follows: forbidden-pattern characterization for level 3/2 of the DDH (this implies the decidability of this level) decidability of the Boolean hierarchy over level 1/2 of the DDH definition of decidable hierarchies having close relations to the DDH and STH Moreover, we prove/reprove the decidability of the levels 1/2 and 3/2 of both hierarchies in terms of forbidden-pattern characterizations. We show the decidability of the Boolean hierarchies over level 1/2 of the DDH and over level 1/2 of the STH. A technique which uses word extensions plays the central role in the proofs of these results. With this technique it is possible to treat the levels 1/2 and 3/2 of both hierarchies in a uniform way. Furthermore, it can be used to prove the decidability of the mentioned Boolean hierarchies. Among other things we provide a combinatorial tool that allows to partition words of arbitrary length into factors of bounded length such that every second factor u leads to a loop with label u in a given finite automaton.}, subject = {Automatentheorie}, language = {en} } @article{GlemarecLugrinBosseretal.2022, author = {Gl{\´e}marec, Yann and Lugrin, Jean-Luc and Bosser, Anne-Gwenn and Buche, C{\´e}dric and Latoschik, Marc Erich}, title = {Controlling the stage: a high-level control system for virtual audiences in Virtual Reality}, series = {Frontiers in Virtual Reality}, volume = {3}, journal = {Frontiers in Virtual Reality}, issn = {2673-4192}, doi = {10.3389/frvir.2022.876433}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-284601}, year = {2022}, abstract = {This article presents a novel method for controlling a virtual audience system (VAS) in Virtual Reality (VR) application, called STAGE, which has been originally designed for supervised public speaking training in university seminars dedicated to the preparation and delivery of scientific talks. We are interested in creating pedagogical narratives: narratives encompass affective phenomenon and rather than organizing events changing the course of a training scenario, pedagogical plans using our system focus on organizing the affects it arouses for the trainees. Efficiently controlling a virtual audience towards a specific training objective while evaluating the speaker's performance presents a challenge for a seminar instructor: the high level of cognitive and physical demands required to be able to control the virtual audience, whilst evaluating speaker's performance, adjusting and allowing it to quickly react to the user's behaviors and interactions. It is indeed a critical limitation of a number of existing systems that they rely on a Wizard of Oz approach, where the tutor drives the audience in reaction to the user's performance. We address this problem by integrating with a VAS a high-level control component for tutors, which allows using predefined audience behavior rules, defining custom ones, as well as intervening during run-time for finer control of the unfolding of the pedagogical plan. At its core, this component offers a tool to program, select, modify and monitor interactive training narratives using a high-level representation. The STAGE offers the following features: i) a high-level API to program pedagogical narratives focusing on a specific public speaking situation and training objectives, ii) an interactive visualization interface iii) computation and visualization of user metrics, iv) a semi-autonomous virtual audience composed of virtual spectators with automatic reactions to the speaker and surrounding spectators while following the pedagogical plan V) and the possibility for the instructor to embody a virtual spectator to ask questions or guide the speaker from within the Virtual Environment. We present here the design, and implementation of the tutoring system and its integration in STAGE, and discuss its reception by end-users.}, language = {en} } @article{GlemarecLugrinBosseretal.2021, author = {Gl{\´e}marec, Yann and Lugrin, Jean-Luc and Bosser, Anne-Gwenn and Collins Jackson, Aryana and Buche, C{\´e}dric and Latoschik, Marc Erich}, title = {Indifferent or Enthusiastic? Virtual Audiences Animation and Perception in Virtual Reality}, series = {Frontiers in Virtual Reality}, volume = {2}, journal = {Frontiers in Virtual Reality}, doi = {10.3389/frvir.2021.666232}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-259328}, pages = {666232}, year = {2021}, abstract = {In this paper, we present a virtual audience simulation system for Virtual Reality (VR). The system implements an audience perception model controlling the nonverbal behaviors of virtual spectators, such as facial expressions or postures. Groups of virtual spectators are animated by a set of nonverbal behavior rules representing a particular audience attitude (e.g., indifferent or enthusiastic). Each rule specifies a nonverbal behavior category: posture, head movement, facial expression and gaze direction as well as three parameters: type, frequency and proportion. In a first user-study, we asked participants to pretend to be a speaker in VR and then create sets of nonverbal behaviour parameters to simulate different attitudes. Participants manipulated the nonverbal behaviours of single virtual spectator to match a specific levels of engagement and opinion toward them. In a second user-study, we used these parameters to design different types of virtual audiences with our nonverbal behavior rules and evaluated their perceptions. Our results demonstrate our system's ability to create virtual audiences with three types of different perceived attitudes: indifferent, critical, enthusiastic. The analysis of the results also lead to a set of recommendations and guidelines regarding attitudes and expressions for future design of audiences for VR therapy and training applications.}, language = {en} } @article{GreubelAndresHennecke2023, author = {Greubel, Andr{\´e} and Andres, Daniela and Hennecke, Martin}, title = {Analyzing reporting on ransomware incidents: a case study}, series = {Social Sciences}, volume = {12}, journal = {Social Sciences}, number = {5}, issn = {2076-0760}, doi = {10.3390/socsci12050265}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-313746}, year = {2023}, abstract = {Knowledge about ransomware is important for protecting sensitive data and for participating in public debates about suitable regulation regarding its security. However, as of now, this topic has received little to no attention in most school curricula. As such, it is desirable to analyze what citizens can learn about this topic outside of formal education, e.g., from news articles. This analysis is both relevant to analyzing the public discourse about ransomware, as well as to identify what aspects of this topic should be included in the limited time available for this topic in formal education. Thus, this paper was motivated both by educational and media research. The central goal is to explore how the media reports on this topic and, additionally, to identify potential misconceptions that could stem from this reporting. To do so, we conducted an exploratory case study into the reporting of 109 media articles regarding a high-impact ransomware event: the shutdown of the Colonial Pipeline (located in the east of the USA). We analyzed how the articles introduced central terminology, what details were provided, what details were not, and what (mis-)conceptions readers might receive from them. Our results show that an introduction of the terminology and technical concepts of security is insufficient for a complete understanding of the incident. Most importantly, the articles may lead to four misconceptions about ransomware that are likely to lead to misleading conclusions about the responsibility for the incident and possible political and technical options to prevent such attacks in the future.}, language = {en} } @techreport{GrigorjewDiederichHossfeldetal.2022, type = {Working Paper}, author = {Grigorjew, Alexej and Diederich, Philip and Hoßfeld, Tobias and Kellerer, Wolfgang}, title = {Affordable Measurement Setups for Networking Device Latency with Sub-Microsecond Accuracy}, series = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)}, journal = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)}, doi = {10.25972/OPUS-28075}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-280751}, pages = {5}, year = {2022}, abstract = {This document presents a networking latency measurement setup that focuses on affordability and universal applicability, and can provide sub-microsecond accuracy. It explains the prerequisites, hardware choices, and considerations to respect during measurement. In addition, it discusses the necessity for exhaustive latency measurements when dealing with high availability and low latency requirements. Preliminary results show that the accuracy is within ±0.02 μs when used with the Intel I350-T2 network adapter.}, subject = {Datennetz}, language = {en} } @techreport{GrigorjewSchumannDiederichetal.2023, type = {Working Paper}, author = {Grigorjew, Alexej and Schumann, Lukas Kilian and Diederich, Philip and Hoßfeld, Tobias and Kellerer, Wolfgang}, title = {Understanding the Performance of Different Packet Reception and Timestamping Methods in Linux}, series = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, journal = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, doi = {10.25972/OPUS-32206}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322064}, pages = {5}, year = {2023}, abstract = {This document briefly presents some renowned packet reception techniques for network packets in Linux systems. Further, it compares their performance when measuring packet timestamps with respect to throughput and accuracy. Both software and hardware timestamps are compared, and various parameters are examined, including frame size, link speed, network interface card, and CPU load. The results indicate that hardware timestamping offers significantly better accuracy with no downsides, and that packet reception techniques that avoid system calls offer superior measurement throughput.}, language = {en} } @article{GrohmannHerbstChalbanietal.2020, author = {Grohmann, Johannes and Herbst, Nikolas and Chalbani, Avi and Arian, Yair and Peretz, Noam and Kounev, Samuel}, title = {A Taxonomy of Techniques for SLO Failure Prediction in Software Systems}, series = {Computers}, volume = {9}, journal = {Computers}, number = {1}, issn = {2073-431X}, doi = {10.3390/computers9010010}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-200594}, pages = {10}, year = {2020}, abstract = {Failure prediction is an important aspect of self-aware computing systems. Therefore, a multitude of different approaches has been proposed in the literature over the past few years. In this work, we propose a taxonomy for organizing works focusing on the prediction of Service Level Objective (SLO) failures. Our taxonomy classifies related work along the dimensions of the prediction target (e.g., anomaly detection, performance prediction, or failure prediction), the time horizon (e.g., detection or prediction, online or offline application), and the applied modeling type (e.g., time series forecasting, machine learning, or queueing theory). The classification is derived based on a systematic mapping of relevant papers in the area. Additionally, we give an overview of different techniques in each sub-group and address remaining challenges in order to guide future research.}, language = {en} } @techreport{GrossmannHomeyer2023, type = {Working Paper}, author = {Großmann, Marcel and Homeyer, Tobias}, title = {Emulation of Multipath Transmissions in P4 Networks with Kathar{\´a}}, series = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, journal = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, doi = {10.25972/OPUS-32209}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322095}, pages = {4}, year = {2023}, abstract = {Packets sent over a network can either get lost or reach their destination. Protocols like TCP try to solve this problem by resending the lost packets. However, retransmissions consume a lot of time and are cumbersome for the transmission of critical data. Multipath solutions are quite common to address this reliability issue and are available on almost every layer of the ISO/OSI model. We propose a solution based on a P4 network to duplicate packets in order to send them to their destination via multiple routes. The last network hop ensures that only a single copy of the traffic is further forwarded to its destination by adopting a concept similar to Bloom filters. Besides, if fast delivery is requested we provide a P4 prototype, which randomly forwards the packets over different transmission paths. For reproducibility, we implement our approach in a container-based network emulation system called Kathar{\´a}.}, language = {en} } @techreport{GrossmannLe2023, type = {Working Paper}, author = {Großmann, Marcel and Le, Duy Thanh}, title = {Visualization of Network Emulation Enabled by Kathar{\´a}}, series = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, journal = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, doi = {10.25972/OPUS-32218}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322189}, pages = {4}, year = {2023}, abstract = {In network research, reproducibility of experiments is not always easy to achieve. Infrastructures are cumbersome to set up or are not available due to vendor-specific devices. Emulators try to overcome those issues to a given extent and are available in different service models. Unfortunately, the usability of emulators requires time-consuming efforts and a deep understanding of their functionality. At first, we analyze to which extent currently available open-source emulators support network configurations and how user-friendly they are. With these insights, we describe, how an ease-to-use emulator is implemented and may run as a Network Emulator as a Service (NEaaS). Therefore, virtualization plays a major role in order to deploy a NEaaS based on Kathar{\´a}.}, language = {en} } @article{GuptaMinochaThapaetal.2022, author = {Gupta, Shishir K. and Minocha, Rashmi and Thapa, Prithivi Jung and Srivastava, Mugdha and Dandekar, Thomas}, title = {Role of the pangolin in origin of SARS-CoV-2: an evolutionary perspective}, series = {International Journal of Molecular Sciences}, volume = {23}, journal = {International Journal of Molecular Sciences}, number = {16}, issn = {1422-0067}, doi = {10.3390/ijms23169115}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-285995}, year = {2022}, abstract = {After the recent emergence of SARS-CoV-2 infection, unanswered questions remain related to its evolutionary history, path of transmission or divergence and role of recombination. There is emerging evidence on amino acid substitutions occurring in key residues of the receptor-binding domain of the spike glycoprotein in coronavirus isolates from bat and pangolins. In this article, we summarize our current knowledge on the origin of SARS-CoV-2. We also analyze the host ACE2-interacting residues of the receptor-binding domain of spike glycoprotein in SARS-CoV-2 isolates from bats, and compare it to pangolin SARS-CoV-2 isolates collected from Guangdong province (GD Pangolin-CoV) and Guangxi autonomous regions (GX Pangolin-CoV) of South China. Based on our comparative analysis, we support the view that the Guangdong Pangolins are the intermediate hosts that adapted the SARS-CoV-2 and represented a significant evolutionary link in the path of transmission of SARS-CoV-2 virus. We also discuss the role of intermediate hosts in the origin of Omicron.}, language = {en} } @article{HalbigLatoschik2021, author = {Halbig, Andreas and Latoschik, Marc Erich}, title = {A systematic review of physiological measurements, factors, methods, and applications in virtual reality}, series = {Frontiers in Virtual Reality}, volume = {2}, journal = {Frontiers in Virtual Reality}, doi = {10.3389/frvir.2021.694567}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-260503}, year = {2021}, abstract = {Measurements of physiological parameters provide an objective, often non-intrusive, and (at least semi-)automatic evaluation and utilization of user behavior. In addition, specific hardware devices of Virtual Reality (VR) often ship with built-in sensors, i.e. eye-tracking and movements sensors. Hence, the combination of physiological measurements and VR applications seems promising. Several approaches have investigated the applicability and benefits of this combination for various fields of applications. However, the range of possible application fields, coupled with potentially useful and beneficial physiological parameters, types of sensor, target variables and factors, and analysis approaches and techniques is manifold. This article provides a systematic overview and an extensive state-of-the-art review of the usage of physiological measurements in VR. We identified 1,119 works that make use of physiological measurements in VR. Within these, we identified 32 approaches that focus on the classification of characteristics of experience, common in VR applications. The first part of this review categorizes the 1,119 works by field of application, i.e. therapy, training, entertainment, and communication and interaction, as well as by the specific target factors and variables measured by the physiological parameters. An additional category summarizes general VR approaches applicable to all specific fields of application since they target typical VR qualities. In the second part of this review, we analyze the target factors and variables regarding the respective methods used for an automatic analysis and, potentially, classification. For example, we highlight which measurement setups have been proven to be sensitive enough to distinguish different levels of arousal, valence, anxiety, stress, or cognitive workload in the virtual realm. This work may prove useful for all researchers wanting to use physiological data in VR and who want to have a good overview of prior approaches taken, their benefits and potential drawbacks.}, language = {en} } @phdthesis{Hartmann2015, author = {Hartmann, Matthias}, title = {Optimization and Design of Network Architectures for Future Internet Routing}, issn = {1432-8801}, doi = {10.25972/OPUS-11416}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-114165}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {At the center of the Internet's protocol stack stands the Internet Protocol (IP) as a common denominator that enables all communication. To make routing efficient, resilient, and scalable, several aspects must be considered. Care must be taken that traffic is well balanced to make efficient use of the existing network resources, both in failure free operation and in failure scenarios. Finding the optimal routing in a network is an NP-complete problem. Therefore, routing optimization is usually performed using heuristics. This dissertation shows that a routing optimized with one objective function is often not good when looking at other objective functions. It can even be worse than unoptimized routing with respect to that objective function. After looking at failure-free routing and traffic distribution in different failure scenarios, the analysis is extended to include the loop-free alternate (LFA) IP fast reroute mechanism. Different application scenarios of LFAs are examined and a special focus is set on the fact that LFAs usually cannot protect all traffic in a network even against single link failures. Thus, the routing optimization for LFAs is targeted on both link utilization and failure coverage. Finally, the pre-congestion notification mechanism PCN for network admission control and overload protection is analyzed and optimized. Different design options for implementing the protocol are compared, before algorithms are developed for the calculation and optimization of protocol parameters and PCN-based routing. The second part of the thesis tackles a routing problem that can only be resolved on a global scale. The scalability of the Internet is at risk since a major and intensifying growth of the interdomain routing tables has been observed. Several protocols and architectures are analyzed that can be used to make interdomain routing more scalable. The most promising approach is the locator/identifier (Loc/ID) split architecture which separates routing from host identification. This way, changes in connectivity, mobility of end hosts, or traffic-engineering activities are hidden from the routing in the core of the Internet and the routing tables can be kept much smaller. All of the currently proposed Loc/ID split approaches have their downsides. In particular, the fact that most architectures use the ID for routing outside the Internet's core is a poor design, which inhibits many of the possible features of a new routing architecture. To better understand the problems and to provide a solution for a scalable routing design that implements a true Loc/ID split, the new GLI-Split protocol is developed in this thesis, which provides separation of global and local routing and uses an ID that is independent from any routing decisions. Besides GLI-Split, several other new routing architectures implementing Loc/ID split have been proposed for the Internet. Most of them assume that a mapping system is queried for EID-to-RLOC mappings by an intermediate node at the border of an edge network. When the mapping system is queried by an intermediate node, packets are already on their way towards their destination, and therefore, the mapping system must be fast, scalable, secure, resilient, and should be able to relay packets without locators to nodes that can forward them to the correct destination. The dissertation develops a classification for all proposed mapping system architectures and shows their similarities and differences. Finally, the fast two-level mapping system FIRMS is developed. It includes security and resilience features as well as a relay service for initial packets of a flow when intermediate nodes encounter a cache miss for the EID-to-RLOC mapping.}, subject = {Netzwerk}, language = {en} } @techreport{HasslingerNtougiasHasslingeretal.2023, type = {Working Paper}, author = {Hasslinger, Gerhard and Ntougias, Konstantinos and Hasslinger, Frank and Hohlfeld, Oliver}, title = {Performance Analysis of Basic Web Caching Strategies (LFU, LRU, FIFO, ...) with Time-To-Live Data Validation}, series = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, journal = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, doi = {10.25972/OPUS-32204}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322048}, pages = {5}, year = {2023}, abstract = {Web caches often use a Time-to-live (TTL) limit to validate data consistency with web servers. We study the impact of TTL constraints on the hit ratio of basic strategies in caches of fixed size. We derive analytical results and confirm their accuracy in comparison to simulations. We propose a score-based caching method with awareness of the current TTL per data for improving the hit ratio close to the upper bound.}, language = {en} } @phdthesis{Heck2005, author = {Heck, Klaus}, title = {Wireless LAN performance studies in the context of 4G networks}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-14896}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {Wireless communication is nothing new. The first data transmissions based on electromagnetic waves have been successfully performed at the end of the 19th century. However, it took almost another century until the technology was ripe for mass market. The first mobile communication systems based on the transmission of digital data were introduced in the late 1980s. Within just a couple of years they have caused a revolution in the way people communicate. The number of cellular phones started to outnumber the fixed telephone lines in many countries and is still rising. New technologies in 3G systems, such as UMTS, allow higher data rates and support various kinds of multimedia services. Nevertheless, the end of the road in wireless communication is far from being reached. In the near future, the Internet and cellular phone systems are expected to be integrated to a new form of wireless system. Bandwidth requirements for a rich set of wireless services, e.g.\ video telephony, video streaming, online gaming, will be easily met. The transmission of voice data will just be another IP based service. On the other hand, building such a system is by far not an easy task. The problems in the development of the UMTS system showed the high complexity of wireless systems with support for bandwidth-hungry, IP-based services. But the technological challenges are just one difficulty. Telecommunication systems are planned on a world-wide basis, such that standard bodies, governments, institutions, hardware vendors, and service providers have to find agreements and compromises on a number of different topics. In this work, we provide the reader with a discussion of many of the topics involved in the planning of a Wireless LAN system that is capable of being integrated into the 4th generation mobile networks (4G) that is being discussed nowadays. Therefore, it has to be able to cope with interactive voice and video traffic while still offering high data rates for best effort traffic. Let us assume a scenario where a huge office complex is completely covered with Wireless LAN access points. Different antenna systems are applied in order to reduce the number of access points that are needed on the one hand, while optimizing the coverage on the other. No additional infrastructure is implemented. Our goal is to evaluate whether the Wireless LAN technology is capable of dealing with the various demands of such a scenario. First, each single access point has to be capable of supporting best-effort and Quality of Service (QoS) demanding applications simultaneously. The IT infrastructure in our scenario consists solely of Wireless LAN, such that it has to allow users surfing the Web, while others are involved in voice calls or video conferences. Then, there is the problem of overlapping cells. Users attached to one access point produce interference for others. However, the QoS support has to be maintained, which is not an easy task. Finally, there are nomadic users, which roam from one Wireless LAN cell to another even during a voice call. There are mechanisms in the standard that allow for mobility, but their capabilities for QoS support are yet to be studied. This shows the large number of unresolved issues when it comes to Wireless LAN in the context of 4G networks. In this work we want to tackle some of the problems.}, subject = {Drahtloses lokales Netz}, language = {en} } @article{HeinLatoschikWienrich2022, author = {Hein, Rebecca M. and Latoschik, Marc Erich and Wienrich, Carolin}, title = {Inter- and transcultural learning in cocial virtual reality: a proposal for an inter- and transcultural virtual object database to be used in the implementation, reflection, and evaluation of virtual encounters}, series = {Multimodal Technologies and Interaction}, volume = {6}, journal = {Multimodal Technologies and Interaction}, number = {7}, issn = {2414-4088}, doi = {10.3390/mti6070050}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-278974}, year = {2022}, abstract = {Visual stimuli are frequently used to improve memory, language learning or perception, and understanding of metacognitive processes. However, in virtual reality (VR), there are few systematically and empirically derived databases. This paper proposes the first collection of virtual objects based on empirical evaluation for inter-and transcultural encounters between English- and German-speaking learners. We used explicit and implicit measurement methods to identify cultural associations and the degree of stereotypical perception for each virtual stimuli (n = 293) through two online studies, including native German and English-speaking participants. The analysis resulted in a final well-describable database of 128 objects (called InteractionSuitcase). In future applications, the objects can be used as a great interaction or conversation asset and behavioral measurement tool in social VR applications, especially in the field of foreign language education. For example, encounters can use the objects to describe their culture, or teachers can intuitively assess stereotyped attitudes of the encounters.}, language = {en} } @article{HeinWienrichLatoschik2021, author = {Hein, Rebecca M. and Wienrich, Carolin and Latoschik, Marc E.}, title = {A systematic review of foreign language learning with immersive technologies (2001-2020)}, series = {AIMS Electronics and Electrical Engineering}, volume = {5}, journal = {AIMS Electronics and Electrical Engineering}, number = {2}, doi = {10.3934/electreng.2021007}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-268811}, pages = {117-145}, year = {2021}, abstract = {This study provides a systematic literature review of research (2001-2020) in the field of teaching and learning a foreign language and intercultural learning using immersive technologies. Based on 2507 sources, 54 articles were selected according to a predefined selection criteria. The review is aimed at providing information about which immersive interventions are being used for foreign language learning and teaching and where potential research gaps exist. The papers were analyzed and coded according to the following categories: (1) investigation form and education level, (2) degree of immersion, and technology used, (3) predictors, and (4) criterions. The review identified key research findings relating the use of immersive technologies for learning and teaching a foreign language and intercultural learning at cognitive, affective, and conative levels. The findings revealed research gaps in the area of teachers as a target group, and virtual reality (VR) as a fully immersive intervention form. Furthermore, the studies reviewed rarely examined behavior, and implicit measurements related to inter- and trans-cultural learning and teaching. Inter- and transcultural learning and teaching especially is an underrepresented investigation subject. Finally, concrete suggestions for future research are given. The systematic review contributes to the challenge of interdisciplinary cooperation between pedagogy, foreign language didactics, and Human-Computer Interaction to achieve innovative teaching-learning formats and a successful digital transformation.}, language = {en} } @phdthesis{Henjes2010, author = {Henjes, Robert}, title = {Performance Evaluation of Publish/Subscribe Middleware Architectures}, doi = {10.25972/OPUS-4536}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-53388}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2010}, abstract = {While developing modern applications, it is necessary to ensure an efficient and performant communication between different applications. In current environments, a middleware software is used, which supports the publish/subscribe communication pattern. Using this communication pattern, a publisher sends information encapsulated in messages to the middleware. A subscriber registers its interests at the middleware. The monograph describes three different steps to determine the performance of such a system. In a first step, the message throughput performance of a publish/subscribe in different scenarios is measured using a Java Message Service (JMS) based implementation. In the second step the maximum achievable message throughput is described by adapted models depending on the filter complexity and the replication grade. Using the model, the performance characteristics of a specific system in a given scenario can be determined. These numbers are used for the queuing model described in the third part of the thesis, which supports the dimensioning of a system in realistic scenarios. Additionally, we introduce a method to approximate an M/G/1 system numerically in an efficient way, which can be used for real time analysis to predict the expected performance in a certain scenario. Finally, the analytical model is used to investigate different possibilities to ensure the scalability of the maximum achievable message throughput of the overall system.}, subject = {Middleware}, language = {en} } @article{HentschelKobsHotho2022, author = {Hentschel, Simon and Kobs, Konstantin and Hotho, Andreas}, title = {CLIP knows image aesthetics}, series = {Frontiers in Artificial Intelligence}, volume = {5}, journal = {Frontiers in Artificial Intelligence}, issn = {2624-8212}, doi = {10.3389/frai.2022.976235}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-297150}, year = {2022}, abstract = {Most Image Aesthetic Assessment (IAA) methods use a pretrained ImageNet classification model as a base to fine-tune. We hypothesize that content classification is not an optimal pretraining task for IAA, since the task discourages the extraction of features that are useful for IAA, e.g., composition, lighting, or style. On the other hand, we argue that the Contrastive Language-Image Pretraining (CLIP) model is a better base for IAA models, since it has been trained using natural language supervision. Due to the rich nature of language, CLIP needs to learn a broad range of image features that correlate with sentences describing the image content, composition, environments, and even subjective feelings about the image. While it has been shown that CLIP extracts features useful for content classification tasks, its suitability for tasks that require the extraction of style-based features like IAA has not yet been shown. We test our hypothesis by conducting a three-step study, investigating the usefulness of features extracted by CLIP compared to features obtained from the last layer of a comparable ImageNet classification model. In each step, we get more computationally expensive. First, we engineer natural language prompts that let CLIP assess an image's aesthetic without adjusting any weights in the model. To overcome the challenge that CLIP's prompting only is applicable to classification tasks, we propose a simple but effective strategy to convert multiple prompts to a continuous scalar as required when predicting an image's mean aesthetic score. Second, we train a linear regression on the AVA dataset using image features obtained by CLIP's image encoder. The resulting model outperforms a linear regression trained on features from an ImageNet classification model. It also shows competitive performance with fully fine-tuned networks based on ImageNet, while only training a single layer. Finally, by fine-tuning CLIP's image encoder on the AVA dataset, we show that CLIP only needs a fraction of training epochs to converge, while also performing better than a fine-tuned ImageNet model. Overall, our experiments suggest that CLIP is better suited as a base model for IAA methods than ImageNet pretrained networks.}, language = {en} } @phdthesis{Herrler2007, author = {Herrler, Rainer}, title = {Agentenbasierte Simulation zur Ablaufoptimierung in Krankenh{\"a}usern und anderen verteilten, dynamischen Umgebungen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-24483}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Verteilte dynamische Systeme unter lokalen und globalen Gesichtspunkten zu optimieren ist eine schwierige Aufgabe. Zwar sind grunds{\"a}tzliche Auswirkungen einzelner Maßnahmen h{\"a}ufig bekannt, durch widerstrebende Ziele, Wechselwirkungen zwischen Prozessen und Nebenwirkungen von Maßnahmen ist ein analytisches Vorgehen bei der Optimierung nicht m{\"o}glich. Besonders schwierig wird es, wenn lokale Einheiten einerseits ihre Ziele und Autonomie behalten sollen, aber durch zentrale Vorgaben bzw. Anreize so gesteuert werden sollen, dass ein {\"u}bergeordnetes Ziel erreicht wird. Ein praktisches Beispiel dieses allgemeinen Optimierungsproblems findet sich im Gesundheitswesen. Das Management von modernen Kliniken ist stets mit dem Problem konfrontiert, die Qualit{\"a}t der Pflege zu gew{\"a}hrleisten und gleichzeitig kosteneffizient zu arbeiten. Hier gilt es unter gegeben Rahmenbedingungen und bei Respektierung der Autonomie der Funktionseinheiten, Optimierungsmaßnahmen zu finden und durchzuf{\"u}hren. Vorhandene Werkzeuge zur Simulation und Modellierung bieten f{\"u}r diese Aufgabe keine ausreichend guten Vorgehensmodelle und Modellierungsmechanismen. Die agentenbasierte Simulation erm{\"o}glicht die Abbildung solcher Systeme und die Durchf{\"u}hrung von Simulationsexperimenten zur Bewertung einzelner Maßnahmen. Es werden L{\"o}sungswege und Werkzeuge vorgestellt und evaluiert, die den Benutzer bei der Formalisierung des Wissens und der Modellierung solch komplexer Szenarien unterst{\"u}tzen und ein systematisches Vorgehen zur Optimierung erm{\"o}glichen.}, subject = {Simulation}, language = {de} } @phdthesis{Herrmann2013, author = {Herrmann, Christian}, title = {Robotic Motion Compensation for Applications in Radiation Oncology}, isbn = {978-3-923959-88-4}, doi = {10.25972/OPUS-6727}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-79045}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2013}, abstract = {Aufgrund vieler Verbesserungen der Behandlungsmethoden im Laufe der letzten 60 Jahre, erlaubt die Strahlentherapie heutzutage pr{\"a}zise Behandlungen von statischen Tumoren. Jedoch birgt die Bestrahlung von sich bewegenden Tumoren noch große Herausforderungen in sich, da bewegliche Tumore oft den Behandlungsstrahl verlassen. Dabei reduziert sich die Strahlendosis im Tumor w{\"a}hrend sich diese im umliegenden gesunden Gewebe erh{\"o}ht. Diese Forschungsarbeit zielt darauf ab, die Grenzen der Strahlentherapie zu erweitern, um pr{\"a}zise Behandlungen von beweglichen Tumoren zu erm{\"o}glichen. Der Fokus der Arbeit liegt auf der Erstellung eines Echtzeitsystems zur aktiven Kompensation von Tumorbewegungen durch robotergest{\"u}tzte Methoden. W{\"a}hrend Behandlungen befinden sich Patienten auf einer Patientenliege, mit der statische Lagerungsfehler vor Beginn einer Behandlung korrigiert werden. Die in dieser Arbeit verwendete Patientenliege "HexaPOD" ist ein paralleler Manipulator mit sechs Freiheitsgraden, der große Lasten innerhalb eines eingeschr{\"a}nkten Arbeitsbereichs pr{\"a}zise positionieren kann. Obwohl der HexaPOD urspr{\"u}nglich nicht f{\"u}r dynamische Anwendungen konzipiert wurde, wird dieser f{\"u}r eine dauerhafte Bewegungskompensation eingesetzt, in dem Patienten so bewegt werden, dass Tumore pr{\"a}zise im Zentralstrahl w{\"a}hrend der Dauer einer gesamten Behandlung verbleiben. Um ein echtzeitf{\"a}higes Kompensationssystem auf Basis des HexaPODs zu realisieren, muss eine Reihe an Herausforderungen bew{\"a}ltigt werden. Echtzeitaspekte werden einerseits durch die Verwendung eines harten Echtzeitbetriebssystems abgedeckt, andererseits durch die Messung und Sch{\"a}tzung von Latenzzeiten aller physikalischen Gr{\"o}ßen im System, z.B. Messungen der Tumor- und Atemposition. Neben der konsistenten und durchg{\"a}ngigen Ber{\"u}cksichtigung von akkuraten Zeitinformation, werden alle software-induzierten Latenzen adaptiv ausgeglichen. Dies erfordert Vorhersagen der Tumorposition in die nahe Zukunft. Zahlreiche Pr{\"a}diktoren zur Atem- und Tumorpositionsvorhersage werden vorgeschlagen und anhand verschiedenster Metriken evaluiert. Erweiterungen der Pr{\"a}diktionsalgorithmen werden eingef{\"u}hrt, die sowohl Atem- als auch Tumorpositionsinformationen fusionieren, um Vorhersagen ohne explizites Korrelationsmodell zu erm{\"o}glichen. Die Vorhersagen bestimmen den zuk{\"u}nftigen Bewegungspfad des HexaPODs, um Tumorbewegungen zu kompensieren. Dazu werden verschiedene Regler entwickelt, die eine Trajektorienverfolgung mit dem HexaPOD erm{\"o}glichen. Auf der Basis von linearer und nicht-linearer dynamischer Modellierung des HexaPODs mit Methoden der Systemidentifikation, wird zun{\"a}chst ein modellpr{\"a}diktiver Regler entwickelt. Ein zweiter Regler wird auf Basis einer Annahme {\"u}ber das Arbeitsprinzip des internen Reglers im HexaPOD entworfen. Schließlich wird ein dritter Regler vorgeschlagen, der beide vorhergehenden Regler miteinander kombiniert. F{\"u}r jeden dieser Regler werden vergleichende Ergebnisse aus Experimenten mit realer Hardware und menschlichen Versuchspersonen pr{\"a}sentiert und diskutiert. Dar{\"u}ber hinaus wird die geeignete Wahl von freien Parametern in den Reglern vorgestellt. Neben einer pr{\"a}zisen Verfolgung der Referenztrajektorie spielt der Patientenkomfort eine entscheidende Rolle f{\"u}r die Akzeptanz des Systems. Es wird gezeigt, dass die Regler glatte Trajektorien realisieren k{\"o}nnen, um zu garantieren, dass sich Patienten wohl f{\"u}hlen w{\"a}hrend ihre Tumorbewegung mit Genauigkeiten im Submillimeterbereich ausgeglichen wird. Gesamtfehler werden im Kompensationssystem analysiert, in dem diese zu Trajektorienverfolgungsfehlern und Pr{\"a}diktionsfehlern in Beziehung gesetzt werden. Durch Ausnutzung von Eigenschaften verschiedener Pr{\"a}diktoren wird gezeigt, dass die Startzeit des Systems bis die Verfolgung der Referenztrajektorie erreicht ist, wenige Sekunden betr{\"a}gt. Dies gilt insbesondere f{\"u}r den Fall eines initial ruhenden HexaPODs und ohne Vorwissen {\"u}ber Tumorbewegungen. Dies zeigt die Eignung des Systems f{\"u}r die sehr kurz fraktionierten Behandlungen von Lungentumoren. Das Tumorkompensationssystem wurde ausschließlich auf Basis von klinischer Standard-Hardware entwickelt, die in vielen Behandlungsr{\"a}umen zu finden ist. Durch ein einfaches und flexibles Design k{\"o}nnen Behandlungsr{\"a}ume in kosteneffizienter Weise um M{\"o}glichkeiten der Bewegungskompensation erg{\"a}nzt werden. Dar{\"u}ber hinaus werden aktuelle Behandlungsmethoden wie intensit{\"a}tsmodulierte Strahlentherapie oder Volumetric Modulated Arc Therapy in keiner Weise eingeschr{\"a}nkt. Aufgrund der Unterst{\"u}tzung verschiedener Kompensationsmodi kann das System auf alle beweglichen Tumore angewendet werden, unabh{\"a}ngig davon ob die Bewegungen vorhersagbar (Lungentumore) oder nicht vorhersagbar (Prostatatumore) sind. Durch Integration von geeigneten Methoden zur Tumorpositionsbestimmung kann das System auf einfache Weise zur Kompensation von anderen Tumoren erweitert werden.}, subject = {Robotik}, language = {en} } @techreport{HerrmannRizk2023, type = {Working Paper}, author = {Herrmann, Martin and Rizk, Amr}, title = {On Data Plane Multipath Scheduling for Connected Mobility Applications}, series = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, journal = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, doi = {10.25972/OPUS-32203}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322033}, pages = {3}, year = {2023}, abstract = {Cooperative, connected and automated mobility (CCAM) systems depend on a reliable communication to provide their service and more crucially to ensure the safety of users. One way to ensure the reliability of a data transmission is to use multiple transmission technologies in combination with redundant flows. In this paper, we describe a system requiring multipath communication in the context of CCAM. To this end, we introduce a data plane-based scheduler that uses replication and integration modules to provide redundant and transparent multipath communication. We provide an analytical model for the full replication module of the system and give an overview of how and where the data-plane scheduler components can be realized.}, language = {en} } @techreport{HerrmannRizk2023, type = {Working Paper}, author = {Herrmann, Martin and Rizk, Amr}, title = {On Data Plane Multipath Scheduling for Connected Mobility Applications}, series = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, journal = {KuVS Fachgespr{\"a}ch - W{\"u}rzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS'23)}, edition = {aktualisierte Version}, doi = {10.25972/OPUS-35344}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-353444}, pages = {4}, year = {2023}, abstract = {Cooperative, connected and automated mobility (CCAM) systems depend on a reliable communication to provide their service and more crucially to ensure the safety of users. One way to ensure the reliability of a data transmission is to use multiple transmission technologies in combination with redundant flows. In this paper, we describe a system requiring multipath communication in the context of CCAM. To this end, we introduce a data plane-based scheduler that uses replication and integration modules to provide redundant and transparent multipath communication. We provide an analytical model for the full replication module of the system and give an overview of how and where the data-plane scheduler components can be realized.}, language = {en} } @phdthesis{Hess2009, author = {Hess, Martin}, title = {Motion coordination and control in systems of nonholonomic autonomous vehicles}, isbn = {978-3-923959-55-6}, doi = {10.25972/OPUS-3794}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-46442}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {This work focuses on coordination methods and the control of motion in groups of nonholonomic wheeled mobile robots, in particular of the car-like type. These kind of vehicles are particularly restricted in their mobility. In the main part of this work the two problems of formation motion coordination and of rendezvous in distributed multi-vehicle systems are considered. We introduce several enhancements to an existing motion planning approach for formations of nonholonomic mobile robots. Compared to the original method, the extended approach is able to handle time-varying reference speeds as well as adjustments of the formation's shape during reference trajectory segments with continuously differentiable curvature. Additionally, undesired discontinuities in the speed and steering profiles of the vehicles are avoided. Further, the scenario of snow shoveling on an airfield by utilizing multiple formations of autonomous snowplows is discussed. We propose solutions to the subproblems of motion planning for the formations and tracking control for the individual vehicles. While all situations that might occur have been tested in a simulation environment, we also verified the developed tracking controller in real robot hardware experiments. The task of the rendezvous problem in groups of car-like robots is to drive all vehicles to a common position by means of decentralized control laws. Typically there exists no direct interaction link between all of the vehicles. In this work we present decentralized rendezvous control laws for vehicles with free and with bounded steering. The convergence properties of the approaches are analyzed by utilizing Lyapunov based techniques. Furthermore, they are evaluated within various simulation experiments, while the bounded steering case is also verified within laboratory hardware experiments. Finally we introduce a modification to the bounded steering system that increases the convergence speed at the expense of a higher traveled distance of the vehicles.}, subject = {Robotik}, language = {en} } @article{HirthSeufertLangeetal.2021, author = {Hirth, Matthias and Seufert, Michael and Lange, Stanislav and Meixner, Markus and Tran-Gia, Phuoc}, title = {Performance evaluation of hybrid crowdsensing and fixed sensor systems for event detection in urban environments}, series = {Sensors}, volume = {21}, journal = {Sensors}, number = {17}, issn = {1424-8220}, doi = {10.3390/s21175880}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-245245}, year = {2021}, abstract = {Crowdsensing offers a cost-effective way to collect large amounts of environmental sensor data; however, the spatial distribution of crowdsensing sensors can hardly be influenced, as the participants carry the sensors, and, additionally, the quality of the crowdsensed data can vary significantly. Hybrid systems that use mobile users in conjunction with fixed sensors might help to overcome these limitations, as such systems allow assessing the quality of the submitted crowdsensed data and provide sensor values where no crowdsensing data are typically available. In this work, we first used a simulation study to analyze a simple crowdsensing system concerning the detection performance of spatial events to highlight the potential and limitations of a pure crowdsourcing system. The results indicate that even if only a small share of inhabitants participate in crowdsensing, events that have locations correlated with the population density can be easily and quickly detected using such a system. On the contrary, events with uniformly randomly distributed locations are much harder to detect using a simple crowdsensing-based approach. A second evaluation shows that hybrid systems improve the detection probability and time. Finally, we illustrate how to compute the minimum number of fixed sensors for the given detection time thresholds in our exemplary scenario.}, language = {en} } @misc{Hochmuth2022, type = {Master Thesis}, author = {Hochmuth, Christian Andreas}, title = {Innovative Software in Unternehmen: Strategie und Erfolgsfaktoren f{\"u}r Einf{\"u}hrungsprojekte}, doi = {10.25972/OPUS-28841}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-288411}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {Innovative Software kann die Position eines Unternehmens im Wettbewerb sichern. Die Einf{\"u}hrung innovativer Software ist aber alles andere als einfach. Denn obgleich die technischen Aspekte offensichtlicher sind, dominieren organisationale Aspekte. Zu viele Softwareprojekte schlagen fehl, da die Einf{\"u}hrung nicht gelingt, trotz Erf{\"u}llung technischer Anforderungen. Vor diesem Hintergrund ist das Forschungsziel der Masterarbeit, Risiken und Erfolgsfaktoren f{\"u}r die Einf{\"u}hrung innovativer Software in Unternehmen zu finden, eine Strategie zu formulieren und dabei die Bedeutung von Schl{\"u}sselpersonen zu bestimmen.}, subject = {Innovationsmanagement}, language = {de} } @phdthesis{Hock2014, author = {Hock, David Rog{\´e}r}, title = {Analysis and Optimization of Resilient Routing in Core Communication Networks}, issn = {1432-8801}, doi = {10.25972/OPUS-10168}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-101681}, school = {Universit{\"a}t W{\"u}rzburg}, pages = {175}, year = {2014}, abstract = {Routing is one of the most important issues in any communication network. It defines on which path packets are transmitted from the source of a connection to the destination. It allows to control the distribution of flows between different locations in the network and thereby is a means to influence the load distribution or to reach certain constraints imposed by particular applications. As failures in communication networks appear regularly and cannot be completely avoided, routing is required to be resilient against such outages, i.e., routing still has to be able to forward packets on backup paths even if primary paths are not working any more. Throughout the years, various routing technologies have been introduced that are very different in their control structure, in their way of working, and in their ability to handle certain failure cases. Each of the different routing approaches opens up their own specific questions regarding configuration, optimization, and inclusion of resilience issues. This monograph investigates, with the example of three particular routing technologies, some concrete issues regarding the analysis and optimization of resilience. It thereby contributes to a better general, technology-independent understanding of these approaches and of their diverse potential for the use in future network architectures. The first considered routing type, is decentralized intra-domain routing based on administrative IP link costs and the shortest path principle. Typical examples are common today's intra-domain routing protocols OSPF and IS-IS. This type of routing includes automatic restoration abilities in case of failures what makes it in general very robust even in the case of severe network outages including several failed components. Furthermore, special IP-Fast Reroute mechanisms allow for a faster reaction on outages. For routing based on link costs, traffic engineering, e.g. the optimization of the maximum relative link load in the network, can be done indirectly by changing the administrative link costs to adequate values. The second considered routing type, MPLS-based routing, is based on the a priori configuration of primary and backup paths, so-called Label Switched Paths. The routing layout of MPLS paths offers more freedom compared to IP-based routing as it is not restricted by any shortest path constraints but any paths can be setup. However, this in general involves a higher configuration effort. Finally, in the third considered routing type, typically centralized routing using a Software Defined Networking (SDN) architecture, simple switches only forward packets according to routing decisions made by centralized controller units. SDN-based routing layouts offer the same freedom as for explicit paths configured using MPLS. In case of a failure, new rules can be setup by the controllers to continue the routing in the reduced topology. However, new resilience issues arise caused by the centralized architecture. If controllers are not reachable anymore, the forwarding rules in the single nodes cannot be adapted anymore. This might render a rerouting in case of connection problems in severe failure scenarios infeasible.}, subject = {Leistungsbewertung}, language = {en} } @article{HolfelderMulanskySchleeetal.2021, author = {Holfelder, Marc and Mulansky, Lena and Schlee, Winfried and Baumeister, Harald and Schobel, Johannes and Greger, Helmut and Hoff, Andreas and Pryss, R{\"u}diger}, title = {Medical device regulation efforts for mHealth apps during the COVID-19 pandemic — an experience report of Corona Check and Corona Health}, series = {J — Multidisciplinary Scientific Journal}, volume = {4}, journal = {J — Multidisciplinary Scientific Journal}, number = {2}, issn = {2571-8800}, doi = {10.3390/j4020017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-285434}, pages = {206 -- 222}, year = {2021}, abstract = {Within the healthcare environment, mobile health (mHealth) applications (apps) are becoming more and more important. The number of new mHealth apps has risen steadily in the last years. Especially the COVID-19 pandemic has led to an enormous amount of app releases. In most countries, mHealth applications have to be compliant with several regulatory aspects to be declared a "medical app". However, the latest applicable medical device regulation (MDR) does not provide more details on the requirements for mHealth applications. When developing a medical app, it is essential that all contributors in an interdisciplinary team — especially software engineers — are aware of the specific regulatory requirements beforehand. The development process, however, should not be stalled due to integration of the MDR. Therefore, a developing framework that includes these aspects is required to facilitate a reliable and quick development process. The paper at hand introduces the creation of such a framework on the basis of the Corona Health and Corona Check apps. The relevant regulatory guidelines are listed and summarized as a guidance for medical app developments during the pandemic and beyond. In particular, the important stages and challenges faced that emerged during the entire development process are highlighted.}, language = {en} } @phdthesis{Hopfner2008, author = {Hopfner, Marbod}, title = {Source Code Analysis, Management, and Visualization for PROLOG}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-36300}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {This thesis deals with the management and analysis of source code, which is represented in XML. Using the elementary methods of the XML repository, the XML source code representation is accessed, changed, updated, and saved. We reason about the source code, refactor source code and we visualize dependency graphs for call analysis. The visualized dependencies between files, modules, or packages are used to structure the source code in order to get a system, which is easily to comprehend, to modify and to complete. Sophisticated methods have been developed to slice the source code in order to obtain a working package of a large system, containing only a specific functionality. The basic methods, on which the visualizations and analyses are built on can be changed like changing a plug-in. The visualization methods can be reused in order to handle arbitrary source code representations, e.g., JAML, PHPML, PROLOGML. Dependencies of other context can be visualized, too, e.g., ER diagrams, or website references. The tool SCAV supports source code visualization and analyzing methods.}, subject = {Refactoring}, language = {en} } @article{HossfeldHeegaardKellerer2023, author = {Hossfeld, Tobias and Heegaard, Poul E. and Kellerer, Wolfgang}, title = {Comparing the scalability of communication networks and systems}, series = {IEEE Access}, volume = {11}, journal = {IEEE Access}, doi = {10.1109/ACCESS.2023.3314201}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-349403}, pages = {101474-101497}, year = {2023}, abstract = {Scalability is often mentioned in literature, but a stringent definition is missing. In particular, there is no general scalability assessment which clearly indicates whether a system scales or not or whether a system scales better than another. The key contribution of this article is the definition of a scalability index (SI) which quantifies if a system scales in comparison to another system, a hypothetical system, e.g., linear system, or the theoretically optimal system. The suggested SI generalizes different metrics from literature, which are specialized cases of our SI. The primary target of our scalability framework is, however, benchmarking of two systems, which does not require any reference system. The SI is demonstrated and evaluated for different use cases, that are (1) the performance of an IoT load balancer depending on the system load, (2) the availability of a communication system depending on the size and structure of the network, (3) scalability comparison of different location selection mechanisms in fog computing with respect to delays and energy consumption; (4) comparison of time-sensitive networking (TSN) mechanisms in terms of efficiency and utilization. Finally, we discuss how to use and how not to use the SI and give recommendations and guidelines in practice. To the best of our knowledge, this is the first work which provides a general SI for the comparison and benchmarking of systems, which is the primary target of our scalability analysis.}, language = {en} } @phdthesis{Houshiar2017, author = {Houshiar, Hamidreza}, title = {Documentation and mapping with 3D point cloud processing}, isbn = {978-3-945459-14-0}, doi = {10.25972/OPUS-14449}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144493}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {3D point clouds are a de facto standard for 3D documentation and modelling. The advances in laser scanning technology broadens the usability and access to 3D measurement systems. 3D point clouds are used in many disciplines such as robotics, 3D modelling, archeology and surveying. Scanners are able to acquire up to a million of points per second to represent the environment with a dense point cloud. This represents the captured environment with a very high degree of detail. The combination of laser scanning technology with photography adds color information to the point clouds. Thus the environment is represented more realistically. Full 3D models of environments, without any occlusion, require multiple scans. Merging point clouds is a challenging process. This thesis presents methods for point cloud registration based on the panorama images generated from the scans. Image representation of point clouds introduces 2D image processing methods to 3D point clouds. Several projection methods for the generation of panorama maps of point clouds are presented in this thesis. Additionally, methods for point cloud reduction and compression based on the panorama maps are proposed. Due to the large amounts of data generated from the 3D measurement systems these methods are necessary to improve the point cloud processing, transmission and archiving. This thesis introduces point cloud processing methods as a novel framework for the digitisation of archeological excavations. The framework replaces the conventional documentation methods for excavation sites. It employs point clouds for the generation of the digital documentation of an excavation with the help of an archeologist on-site. The 3D point cloud is used not only for data representation but also for analysis and knowledge generation. Finally, this thesis presents an autonomous indoor mobile mapping system. The mapping system focuses on the sensor placement planning method. Capturing a complete environment requires several scans. The sensor placement planning method solves for the minimum required scans to digitise large environments. Combining this method with a navigation system on a mobile robot platform enables it to acquire data fully autonomously. This thesis introduces a novel hole detection method for point clouds to detect obscured parts of a captured environment. The sensor placement planning method selects the next scan position with the most coverage of the obscured environment. This reduces the required number of scans. The navigation system on the robot platform consist of path planning, path following and obstacle avoidance. This guarantees the safe navigation of the mobile robot platform between the scan positions. The sensor placement planning method is designed as a stand alone process that could be used with a mobile robot platform for autonomous mapping of an environment or as an assistant tool for the surveyor on scanning projects.}, subject = {3D Punktwolke}, language = {en} } @phdthesis{Hossfeld2009, author = {Hoßfeld, Tobias}, title = {Performance Evaluation of Future Internet Applications and Emerging User Behavior}, doi = {10.25972/OPUS-3067}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37570}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {In future telecommunication systems, we observe an increasing diversity of access networks. The separation of transport services and applications or services leads to multi-network services, i.e., a future service has to work transparently to the underlying network infrastructure. Multi-network services with edge-based intelligence, like P2P file sharing or the Skype VoIP service, impose new traffic control paradigms on the future Internet. Such services adapt the amount of consumed bandwidth to reach different goals. A selfish behavior tries to keep the QoE of a single user above a certain level. Skype, for instance, repeats voice samples depending on the perceived end-to-end loss. From the viewpoint of a single user, the replication of voice data overcomes the degradation caused by packet loss and enables to maintain a certain QoE. The cost for this achievement is a higher amount of consumed bandwidth. However, if the packet loss is caused by congestion in the network, this additionally required bandwidth even worsens the network situation. Altruistic behavior, on the other side, would reduce the bandwidth consumption in such a way that the pressure on the network is released and thus the overall network performance is improved. In this monograph, we analyzed the impact of the overlay, P2P, and QoE paradigms in future Internet applications and the interactions from the observing user behavior. The shift of intelligence toward the edge is accompanied by a change in the emerging user behavior and traffic profile, as well as a change from multi-service networks to multi-networks services. In addition, edge-based intelligence may lead to a higher dynamics in the network topology, since the applications are often controlled by an overlay network, which can rapidly change in size and structure as new nodes can leave or join the overlay network in an entirely distributed manner. As a result, we found that the performance evaluation of such services provides new challenges, since novel key performance factors have to be first identified, like pollution of P2P systems, and appropriate models of the emerging user behavior are required, e.g. taking into account user impatience. As common denominator of the presented studies in this work, we focus on a user-centric view when evaluating the performance of future Internet applications. For a subscriber of a certain application or service, the perceived quality expressed as QoE will be the major criterion of the user's satisfaction with the network and service providers. We selected three different case studies and characterized the application's performance from the end user's point of view. Those are (1) cooperation in mobile P2P file sharing networks, (2) modeling of online TV recording services, and (3) QoE of edge-based VoIP applications. The user-centric approach facilitates the development of new mechanisms to overcome problems arising from the changing user behavior. An example is the proposed CycPriM cooperation strategy, which copes with selfish user behavior in mobile P2P file sharing system. An adequate mechanism has also been shown to be efficient in a heterogeneous B3G network with mobile users conducting vertical handovers between different wireless access technologies. The consideration of the user behavior and the user perceived quality guides to an appropriate modeling of future Internet applications. In the case of the online TV recording service, this enables the comparison between different technical realizations of the system, e.g. using server clusters or P2P technology, to properly dimension the installed network elements and to assess the costs for service providers. Technologies like P2P help to overcome phenomena like flash crowds and improve scalability compared to server clusters, which may get overloaded in such situations. Nevertheless, P2P technology invokes additional challenges and different user behavior to that seen in traditional client/server systems. Beside the willingness to share files and the churn of users, peers may be malicious and offer fake contents to disturb the data dissemination. Finally, the understanding and the quantification of QoE with respect to QoS degradations permits designing sophisticated edge-based applications. To this end, we identified and formulated the IQX hypothesis as an exponential interdependency between QoE and QoS parameters, which we validated for different examples. The appropriate modeling of the emerging user behavior taking into account the user's perceived quality and its interactions with the overlay and P2P paradigm will finally help to design future Internet applications.}, subject = {Leistungsbewertung}, language = {en} } @phdthesis{Huber2023, author = {Huber, Stephan}, title = {Proxemo: Documenting Observed Emotions in HCI}, doi = {10.25972/OPUS-30573}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-305730}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {For formative evaluations of user experience (UX) a variety of methods have been developed over the years. However, most techniques require the users to interact with the study as a secondary task. This active involvement in the evaluation is not inclusive of all users and potentially biases the experience currently being studied. Yet there is a lack of methods for situations in which the user has no spare cognitive resources. This condition occurs when 1) users' cognitive abilities are impaired (e.g., people with dementia) or 2) users are confronted with very demanding tasks (e.g., air traffic controllers). In this work we focus on emotions as a key component of UX and propose the new structured observation method Proxemo for formative UX evaluations. Proxemo allows qualified observers to document users' emotions by proxy in real time and then directly link them to triggers. Technically this is achieved by synchronising the timestamps of emotions documented by observers with a video recording of the interaction. In order to facilitate the documentation of observed emotions in highly diverse contexts we conceptualise and implement two separate versions of a documentation aid named Proxemo App. For formative UX evaluations of technology-supported reminiscence sessions with people with dementia, we create a smartwatch app to discreetly document emotions from the categories anger, general alertness, pleasure, wistfulness and pride. For formative UX evaluations of prototypical user interfaces with air traffic controllers we create a smartphone app to efficiently document emotions from the categories anger, boredom, surprise, stress and pride. Descriptive case studies in both application domains indicate the feasibility and utility of the method Proxemo and the appropriateness of the respectively adapted design of the Proxemo App. The third part of this work is a series of meta-evaluation studies to determine quality criteria of Proxemo. We evaluate Proxemo regarding its reliability, validity, thoroughness and effectiveness, and compare Proxemo's efficiency and the observers' experience to documentation with pen and paper. Proxemo is reliable, as well as more efficient, thorough and effective than handwritten notes and provides a better UX to observers. Proxemo compares well with existing methods where benchmarks are available. With Proxemo we contribute a validated structured observation method that has shown to meet requirements formative UX evaluations in the extreme contexts of users with cognitive impairments or high task demands. Proxemo is agnostic regarding researchers' theoretical approaches and unites reductionist and holistic perspectives within one method. Future work should explore the applicability of Proxemo for further domains and extend the list of audited quality criteria to include, for instance, downstream utility. With respect to basic research we strive to better understand the sources leading observers to empathic judgments and propose reminisce and older adults as model environment for investigating mixed emotions.}, subject = {Gef{\"u}hl}, language = {en} }