@unpublished{FerschMalyRueheetal.2023,
  author    = {Fersch, Daniel and Mal{\´y}, Pavel and R{\"u}he, Jessica and Lisinetskii, Victor and Hensen, Matthias and W{\"u}rthner, Frank and Brixner, Tobias},
  title     = {Single-Molecule Ultrafast Fluorescence-Detected Pump-Probe Microscopy},
  doi       = {10.25972/OPUS-31348},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-313485},
  year      = {2023},
  abstract  = {We introduce fluorescence-detected pump-probe microscopy by combining a wavelength-tunable ultrafast laser with a confocal scanning fluorescence microscope, enabling access to the femtosecond time scale on the micrometer spatial scale. In addition, we obtain spectral information from Fourier transformation over excitation pulse-pair time delays. We demonstrate this new approach on a model system of a terrylene bisimide (TBI) dye embedded in a PMMA matrix and acquire the linear excitation spectrum as well as time-dependent pump-probe spectra simultaneously. We then push the technique towards single TBI molecules and analyze the statistical distribution of their excitation spectra. Furthermore, we demonstrate the ultrafast transient evolution of several individual molecules, highlighting their different behavior in contrast to the ensemble due to their individual local environment. By correlating the linear and nonlinear spectra, we assess the effect of the molecular environment on the excited-state energy.},
  subject      = {Fluoreszenz},
  language  = {en}
}
@phdthesis{Mims2023,
  author    = {Mims, David},
  title     = {Einblicke in die Spinchemie durch Untersuchung des Magnetfeldeffektes in rigide gebundenen Radikalionenpaaren},
  doi       = {10.25972/OPUS-30354},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-303547},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2023},
  abstract  = {Synthese starrer Donor-Akzeptor-Verbindungen und Untersuchung des Magnetfeldeffektes auf Lebenszeit resultierender Biradikale mittels optischer Spektroskopie.},
  subject      = {Magnetfeldeffekt},
  language  = {de}
}
@article{PinznerKellerMutetal.2021,
  author    = {Pinzner, Florian and Keller, Thorsten and Mut, J{\"u}rgen and Bechold, Julian and Seibel, J{\"u}rgen and Groll, J{\"u}rgen},
  title     = {Polyoxazolines with a vicinally double-bioactivated terminus for biomacromolecular affinity assessment},
  series = {Sensors},
  volume    = {21},
  journal   = {Sensors},
  number    = {9},
  issn      = {1424-8220},
  doi       = {10.3390/s21093153},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-239530},
  year      = {2021},
  abstract  = {Interactions between proteins and carbohydrates with larger biomacromolecules, e.g., lectins, are usually examined using self-assembled monolayers on target gold surfaces as a simplified model measuring setup. However, most of those measuring setups are either limited to a single substrate or do not allow for control over ligand distance and spacing. Here, we develop a synthetic strategy, consisting of a cascade of a thioesterification, native chemical ligation (NCL) and thiol-ene reaction, in order to create three-component polymer conjugates with a defined double bioactivation at the chain end. The target architecture is the vicinal attachment of two biomolecule residues to the α telechelic end point of a polymer and a thioether group at the ω chain end for fixating the conjugate to a gold sensor chip surface. As proof-of-principle studies for affinity measurements, we demonstrate the interaction between covalently bound mannose and ConA in surface acoustic wave (SAW) and surface plasmon resonance (SPR) experiments.},
  language  = {en}
}
@phdthesis{Roos2023,
  author    = {Roos, Lena},
  title     = {Synthese unterschiedlicher Tetracene und Untersuchung ihrer optischen und elektronischen Eigenschaften},
  doi       = {10.25972/OPUS-31326},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-313268},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2023},
  abstract  = {Mittels einer f{\"u}nfstufigen Synthese wurde das 2,2´-Ditetracen als Modellsystem zur Erforschung von singlet fission-Prozessen hergestellt. Die Synthese wurde mit einer Gesamtausbeute von 21 \% durchgef{\"u}hrt, wobei der Schl{\"u}sselschritt, die Kopplung der beiden Monomere, durch eine Suzuki-Kopplung erfolgte. Das gew{\"u}nschte Produkt konnte nach gr{\"u}ndlicher Reinigung mittels Gradientensublimation als leuchtend rote Einkristalle erhalten werden. W{\"a}hrend die Emissionsspektren der Einzelmolek{\"u}le nahezu identisch sind, zeigen Untersuchungen mittels Photolumineszenzspektroskopie eine Rotverschiebung im Emissionsspektrum des Dimer-Einkristalls im Vergleich zum Einkristall des Tetracen-Monomers. Durch theoretische Berechnung konnte die Absenkung des S1-Zustands des Dimers im Kristall erkl{\"a}rt werden, wodurch die Energiebedingung f{\"u}r singlet fission (2 E(T1) ≤ E(S1)) nicht mehr erf{\"u}llt ist. Weiterhin wurden mehrere mit Alkylgruppen und Vinylgruppen substituierte Tetracenderivate synthetisiert und diese mittels optischer und elektrochemischer Methoden auf ihre Eigenschaften hin untersucht. Es wurde bei allen synthetisierten Derivaten eine Rotverschiebung der Hauptbanden im Absorptionsspektrum beobachtet, was durch einen kleineren HOMO-LUMO-Abstand im Vergleich zum nicht substituierten Tetracen erkl{\"a}rt wird. Es wurde zudem eine erh{\"o}hte Stabilit{\"a}t dieser Derivate gegen{\"u}ber Umwelteinfl{\"u}ssen wie Licht und Sauerstoff, die die Bildung von Endoperoxiden und Dimeren zur Folge haben, festgestellt. Dies kann auf sterische Effekte sowie die Stabilisierung des biradikalischen Zustands dieser Molek{\"u}le durch Hyperkonjugation und Resonanzeffekte zur{\"u}ckgef{\"u}hrt werden.},
  subject      = {Polycyclische Aromaten},
  language  = {de}
}
@phdthesis{Merz2022,
  author    = {Merz, Viktor},
  title     = {Funktionalisierung und Untersuchung von Nanodiamanten f{\"u}r biomedizinische und sensorische Anwendungen},
  doi       = {10.25972/OPUS-24588},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-245888},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {Nanodiamant (ND) ist ein vielseitiges und vielversprechendes Material f{\"u}r Bio-Anwendungen. Trotz vieler Bem{\"u}hungen bleibt die Agglomeration von Nanodiamant und die unspezifische Adsorption von Proteinen an der ND-Oberfl{\"a}che bei Kontakt mit Biofl{\"u}ssigkeiten ein großes Hindernis f{\"u}r biomedizinische Anwendungen. Eine Auswahl verzweigter und linearer Molek{\"u}le mit {\"u}berlegener F{\"a}higkeit zur kolloidalen Stabilisierung von Nanopartikeln in Salz- und Zellmedienumgebung, f{\"u}r bis zu 30 Tage, wurde an die ND-Oberfl{\"a}che angebracht. Das Baukastensystem mit Azid als Außengruppen bietet eine große Vielfalt an Bindungen mit vielen Molek{\"u}len, wie z. B. Medikamenten, Farbstoffen oder Targeting-Molek{\"u}len. Das Anh{\"a}ngen von z. B. Zwitterionen an die Kette sch{\"u}tzt die ND-Oberfl{\"a}che vor der Bildung einer Proteinkorona, wenn die Partikel mit proteinhaltigen Biofl{\"u}ssigkeiten in Kontakt kommen. Die Ergebnisse der thermogravimetrischen Analyse der Beladung der ND-Oberfl{\"a}che zeigen eine signifikante Verhinderung der Proteinadsorption von bis zu 98 \% im Vergleich zu NDs ohne zwitterionische Kopfgruppen und eine lange kolloidale Stabilit{\"a}t, wenn Tetraethylenglykol (TEG) an die Oberfl{\"a}che gebunden wird. Die Vielseitigkeit des modularen Systems, um nicht nur zwitterionische Ketten, sondern auch klickbare funktionelle Molek{\"u}le an fluoreszierende Nanodiamanten (fNDs) zu binden, zeigt das Potenzial des Systems am Nanodiamanten. Unter Verwendung von Defektstrukturen, wie Stickstoff-Vakanz-Zentren (NV), k{\"o}nnen Diamantpartikel aufgrund ihres weitgehend ungiftigen Verhaltens als fluoreszierende Nanodiamanten (fNDs) f{\"u}r photostabile Markierung, Bioimaging und nanoskalige Sensorik in lebenden Zellen und Organismen verwendet werden. Um die fND-Oberfl{\"a}che zu funktionalisieren, wurde eine neuartige Mahltechnik mit Diazoniumsalzen etabliert, um ein Pfropfen auf wenig reaktive HPHT-fNDs durchzuf{\"u}hren, was zu einer hohen Oberfl{\"a}chenbeladung und einem hohen negativen Zetapotenzial f{\"u}hrt. Die Kombination der Vorteile von TEG und zwitterionhaltigen Gruppen mit der F{\"a}higkeit zum Targeting von Antik{\"o}rpern auf fND best{\"a}tigt zum ersten Mal die verbesserte kolloidale Stabilit{\"a}t in Experimenten mit lebenden Zellen. Dar{\"u}ber hinaus deuten die Ergebnisse auf eine verbesserte Corona-Abstoßung im Vergleich zu fND ohne zwitterionhaltige Kopfgruppen hin. Infolgedessen wurden die Zirkulationszeiten von 4 (fND ohne Zwitterionenkette, aber mit Antik{\"o}rper) auf 17 (mit Antik{\"o}rper und Zwitterionenketten) Stunden vergr{\"o}ßert. In nicht-biomedizinischen Anwendungen kann das modulare System als Sonde f{\"u}r Schwermetalle durch die Anbindung von Farbstoffen verwendet werden. Die Detektion von Metallen in verschiedenen Umgebungen mit hoher Selektivit{\"a}t und Spezifit{\"a}t ist eine der Voraussetzungen f{\"u}r den Kampf gegen die Umweltverschmutzung mit diesen Elementen. Pyrene sind gut geeignet und weit bekannt f{\"u}r die Fluoreszenzsensorik in verschiedenen Medien. Das angewandte Sensorprinzip beruht typischerweise auf der Bildung von intra- und intermolekularen Excimeren, was jedoch den Empfindlichkeitsbereich aufgrund der Maskierung von z.B. Quenching-Effekten durch die Excimer-Emission einschr{\"a}nkt. Diese Studie zeigt einen hochselektiven, strukturstabilen chemischen Sensor, der auf der monomeren Fluoreszenz von Pyrenanteilen mit Triazolgruppen basiert. Dieser Sensor kann Cu2+, Pb2+ und Hg2+ in organischen L{\"o}sungsmitteln {\"u}ber einen weiten Konzentrationsbereich quantitativ nachweisen, auch in Gegenwart von ubiquit{\"a}ren Ionen wie Na+, K+, Ca2+ und Mg2+. Die stark emittierende Fluoreszenz des Sensors mit einer langen Lebensdauer von 165 ns wird durch eine 1:1-Komplexbildung bei Zugabe von Metallionen in Acetonitril gel{\"o}scht. Bei Zugabe eines zehnfachen {\"U}berschusses des Metallions zum Sensor bilden sich Agglomerate mit einem Durchmesser von etwa 3 nm. Aufgrund der komplexen Wechselwirkungen im System werden konventionelle lineare Korrelationen nicht f{\"u}r alle Konzentrationen beobachtet. Daher wird ein kritischer Vergleich zwischen der konventionellen Job-Plot-Interpretation, der Methode von Benesi-Hildebrand und einem nicht-linearen Fit vorgestellt. Das vorgestellte System erm{\"o}glicht die spezifische und robuste Erfassung von medizinisch und {\"o}kologisch relevanten Ionen im gesundheitsrelevanten nM-Bereich und k{\"o}nnte z. B. zur {\"U}berwachung der entsprechenden Ionen in Abfallstr{\"o}men eingesetzt werden. Doch h{\"a}ufig landen diese Abfallstr{\"o}me in empfindlichen Aquakulturen, wo eine solche Sensortechnik nur funktioniert, wenn die Sonde wasserl{\"o}slich ist, um die Ausbreitung und Bildung von Umweltsch{\"a}den durch Schwermetalle zu {\"u}berwachen. Viele Chemosensoren arbeiten nur in bestimmten L{\"o}sungsmitteln und unter hochreinen Bedingungen quantitativ. In dieser Arbeit wird eine Methode zur Stabilisierung von wasserunl{\"o}slichen Chemosensoren auf Nanodiamanten in salzhaltigem Wasser unter Beibehaltung der Sensoreffektivit{\"a}t und -spezifit{\"a}t sowie der kolloidalen Stabilit{\"a}t vorgestellt. Zus{\"a}tzlich wird die Sensorf{\"a}higkeit in organischen L{\"o}sungsmitteln beibehalten. Diese Studie gibt Einblick in die Absorptionsf{\"a}higkeit von Pyren-Derivaten an der Nanodiamant-Oberfl{\"a}che und einen Weg, diese reversibel zu desorbieren. Außerdem beweist das System, dass in Anwesenheit von 95 \% Sauerstoffatmosph{\"a}re bei der Fluoreszenzmessung die Ergebnisse nicht von denen in Argonatmosph{\"a}re abweichen. Dar{\"u}ber hinaus st{\"o}rt das Vorhandensein g{\"a}ngiger Ionen im Wasser die kolloidale Stabilit{\"a}t der NDs nicht und hat auch keinen Einfluss auf die Sensorfunktionalit{\"a}t und ist somit ein vielversprechender Kandidat f{\"u}r Messungen ohne aufw{\"a}ndige Pr{\"a}parationsschritte.},
  language  = {en}
}
@phdthesis{Roos2021,
  author    = {Roos, Markus},
  title     = {Synthesis, Photophysics and Photocatalysis of [FeFe] Complex Containing Dyads and Bimolecular Systems},
  doi       = {10.25972/OPUS-23453},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-234537},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {In the course of this work, a total of three photocatalytically active dyads for proton reduction could be synthesized together with the associated individual components. Two of them, D1 and D2, comprised a [Ru(bpy)3]2+ photosensitizer and D3 an [Ir(ppy)2bpy]+ photosensitizer. A Ppyr3-substituted propyldithiolate [FeFe] complex was used as catalyst in all systems. The absorption spectroscopic and electrochemical investigations showed that an inner-dyadic electronic coupling is effectively prevented in the dyads due to conjugation blockers within the bridging units used. The photocatalytic investigations exhibited that all dyad containing two-component systems (2CS) showed a significantly worse performance than the corresponding bimolecular three-component systems (3CS). Transient absorption spectroscopy showed that the 2CS behave very similarly to the associated multicomponent systems during photocatalysis. The electron that was intended for the intramolecular transfer from the photosensitizer unit to the catalyst unit within the dyads remains at the photosensitizer for a relatively long time, analogous to the 3CS and despite the covalently bound catalyst. It is therefore assumed that this intramolecular electron transfer is likely to be hindered as a result of the weak electronic coupling caused by the bridge units used. Instead, the system bypasses this through an intermolecular transfer to other dyad molecules in the immediate vicinity. In addition, with the help of emission quenching experiments and electrochemical investigations, it could be clearly concluded that all investigated systems proceed via the reductive quenching mechanism during photocatalysis.},
  subject      = {Fotokatalyse},
  language  = {en}
}
@article{BrustNaglerShoyamaetal.2023,
  author    = {Brust, Felix and Nagler, Oliver and Shoyama, Kazutaka and Stolte, Matthias and W{\"u}rthner, Frank},
  title     = {Organic Light-Emitting Diodes Based on Silandiol-Bay-Bridged Perylene Bisimides},
  series = {Advanced Optical Materials},
  volume    = {11},
  journal   = {Advanced Optical Materials},
  number    = {5},
  doi       = {10.1002/adom.202202676},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-312599},
  year      = {2023},
  abstract  = {Perylene bisimides (PBIs) are among the best fluorophores but have to be enwrapped for optoelectronic applications by large and heavy substituents to prevent their ππ-stacking, which is known to accelerate non-radiative decay processes in the solid state. Here, light-weight di-tert-butylsilyl groups are introduced to bridge 1,12-dihydroxy and 1,6,7,12-tetrahydroxy PBIs to afford sublimable dyes for vacuum-processed optoelectronic devices. For both new compounds, this substitution provides a twisted and shielded perylene π-core whose, via OSiObridges, rigid structure affords well-resolved absorption and emission spectra with strong fluorescence in solution, as well as in the solid state. The usefulness of these dyes for vacuum-processed optoelectronic devices is demonstrated in organic light-emitting diodes (OLEDs) that show monomer-like emission spectra and high maximum external quantum efficiency (EQEmax) values of up to 3.1\% for the doubly silicon-bridged PBI.},
  language  = {en}
}
@article{SchmidtStolteSuessetal.2019,
  author    = {Schmidt, David and Stolte, Matthias and S{\"u}ß, Jasmin and Liess, Dr. Andreas and Stepanenko, Vladimir and W{\"u}rthner, Frank},
  title     = {Protein-like enwrapped perylene bisimide chromophore as bright microcrystalline emitter material},
  series = {Angewandte Chemie International Edition},
  volume    = {58},
  journal   = {Angewandte Chemie International Edition},
  number    = {38},
  doi       = {10.1002/ange.201907618},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-204809},
  pages     = {13385-13389},
  year      = {2019},
  abstract  = {Strongly emissive solid-state materials are mandatory components for many emerging optoelectronic technologies, but fluorescence is often quenched in the solid state owing to strong intermolecular interactions. The design of new organic pigments, which retain their optical properties despite their high tendency to crystallize, could overcome such limitations. Herein, we show a new material with monomer-like absorption and emission profiles as well as fluorescence quantum yields over 90 \% in its crystalline solid state. The material was synthesized by attaching two bulky tris(4-tert-butylphenyl)phenoxy substituents at the perylene bisimide bay positions. These substituents direct a packing arrangement with full enwrapping of the chromophore and unidirectional chromophore alignment within the crystal lattice to afford optical properties that resemble those of their natural pigment counterparts, in which chromophores are rigidly embedded in protein environments.},
  language  = {en}
}
@article{GriesbeckMichailRauchetal.2019,
  author    = {Griesbeck, Stefanie and Michail, Evripidis and Rauch, Florian and Ogasawara, Hiroaki and Wang, Chenguang and Sato, Yoshikatsu and Edkins, Robert M. and Zhang, Zuolun and Taki, Masayasu and Lambert, Christoph and Yamaguchi, Shigehiro and Marder, Todd B.},
  title     = {The Effect of Branching on One- and Two-Photon Absorption, Cell Viability and Localization of Cationic Triarylborane Chromophores with Dipolar versus Octupolar Charge Distributions for Cellular Imaging},
  series = {Chemistry - A European Journal},
  volume    = {25},
  journal   = {Chemistry - A European Journal},
  number    = {57},
  doi       = {10.1002/chem.201902461},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-204829},
  pages     = {13164-13175},
  year      = {2019},
  abstract  = {Two different chromophores, namely a dipolar and an octupolar system, were prepared and their linear and nonlinear optical properties as well as their bioimaging capabilities were compared. Both contain triphenylamine as the donor and a triarylborane as the acceptor, the latter modified with cationic trimethylammonio groups to provide solubility in aqueous media. The octupolar system exhibits a much higher two-photon brightness, and also better cell viability and enhanced selectivity for lysosomes compared with the dipolar chromophore. Furthermore, both dyes were applied in two-photon excited fluorescence (TPEF) live-cell imaging.},
  language  = {en}
}
@phdthesis{Roger2024,
  author    = {Roger, Chantal},
  title     = {Photophysics and Spin Chemistry of Triptycene Bridge Donor-Acceptor-Triads},
  doi       = {10.25972/OPUS-36303},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-363031},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {The goal of this thesis was to investigate the influence of rotational restriction between individual parts and of the varying electron density in the bridging unit of D B A systems on the exchange interaction 2J, and thus the electronic coupling between a donor state and an acceptor state. A better understanding of how to influence the underlaying spin dynamics in such donor acceptor systems can open up the door to new technologies, such as modern molecular electronics or optoelectronic devices. Therefore, three series of molecules consisting of a TAA electron donor, a TTC or ATC bridging unit and a PDI electron acceptor were studied. To investigate the influence of rotational restriction on 2J and the electronic coupling, a series of four rotationally hindered triads (chapter 6) was synthesised. The dihedral angle between the TAA and the TTC as well as between the TTC and the PDI was restricted by ortho methyl groups at the phenylene linkers of the connecting ends to the TTC bridge, producing a twist around the linking single bond which minimises the π overlap. The triads exhibit varying numbers of ortho methyl groups and therefore different degrees of rotational restriction. In order to shine light on the influence of varying electron density on 2J and the electronic coupling, a series of four substituted triptycene triads (chapter 7) was synthesised. The electron density in the TTC bridging unit was varied by electron donating and electron withdrawing groups in 12,13 position of the TTC bridging unit and thus varying its HOMO/LUMO energy. The last series of two anthracene bridge triads (chapter 8) connected both approaches by restricting the rotation with ortho methyl groups and simultaneously by varying the bridge energies. In order to obtain the electronic properties, steady state absorption and emission spectra of all triads were investigated (chapter 4). Here, all triads show spectral features associated with the separate absorption bands of TAA and the PDI moiety. The reduced QYs, compared to the unsubstituted PDI acceptor, indicate a non radiative quenching mechanism in all triads. The CV data (chapter 5) were used to calculate the energies of possible CSSs and those results were used to assign the CR dynamics into the different Marcus regions. fs TA measurements reveal that all triads form a CSS upon excitation of the PDI moiety. The lifetimes of the involved states and the rate constants were determined by global exponential fits and global target analysis. The CR dynamics upon depopulation of the CSSs were investigated using external magnetic field dependent ns TA spectroscopy. The ns TA maps show that all triads recombine via CRT pathway populating the local 3PDI state in toluene and provided the respective lifetimes. The approximate QYs of triplet formation were determined using actinometry. The magnetic field dependent ns TA data reveal the exchange interaction 2J between singlet and triplet CSS for each triad. Those magnetic field dependent ns TA data in toluene were furthermore treated using a quantum mechanical simulation (done by U.E. Steiner) to extract the rate constants kT and kS for CRT and CRS, respectively. However, the error margins of kS were rather wide. Finally, the electronic couplings between the donor and the acceptor states were obtained by combining the aforementioned experimental results of the rate constants and applying the Bixon Jortner theoretical description of diabatic ET and Andersons perturbative theory of the exchange coupling. Therefore, the experimentally determined values of 2J and the calculated values of kCS and kT were used. The rate constant kS was calculated based on the electronic coupling V1CSS 1S0. The rotationally hindered triads (chapter 6) show a strong influence of the degree of rotational restriction on the lifetimes and rate constants of the CS processes. The rate constants of CS are increasing with increasing rotational freedom. The magnetic field dependent decay data show that the exchange interactions increase with increasing rotational freedom. Based on the CR dynamics, the calculated electronic couplings of the ET processes reflect the same trend along the series. Here, only singlet couplings turned out to be strongly influenced while the triplet couplings are not. Therefore, this series shows that the ET dynamics of donor acceptor systems can strongly be influenced by restricting the rotational freedom. In the substituted triptycene triads (chapter 7), decreasing electron density in the bridging unit causes a decrease of the CS rate constants. The magnetic field dependent decay data show that with decreasing electron density in the bridge the exchange interaction decreases. The CR dynamics-based rate constants and the electronic couplings follow the same trend as the exchange interaction. This series shows that varying the HOMO/LUMO levels of the connecting bridge between donor and acceptor strongly influences the ET processes. In the anthracene bridge triads (chapter 8), the CS process is slow in both triads. The CR was fast in the anthracene triad and is slowed down in the methoxy substituted anthracene bridge triad. The increase of the exchange interaction with increasing electron density in the bridge was more pronounced than in the substituted triptycene triads. Thus, the variation of electron density in the bridge strongly influences the ET processes even though the rotation is restricted. In this thesis, it was shown that the influence of the rotational hindrance as well as the electron density in a connecting bridge have strong influence on all ET processes and the electronic coupling in donor acceptor systems. These approaches can therefore be used to modify magnetic properties of new materials.},
  subject      = {Rotation},
  language  = {en}
}
@phdthesis{Swain2024,
  author    = {Swain, Asim},
  title     = {Helically Twisted Graphene Nanoribbons: Bottom-up Stereospecific Synthesis and Characterization},
  doi       = {10.25972/OPUS-36016},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-360164},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Over the past decade, substantial progress has been made in synthesizing atomically precise carbon nanostructures, with a focus on graphene nanoribbons (NRs) through advanced synthetic techniques. Despite these advancements, precise control over the stereochemistry of twisted NRs remains challenging. This thesis introduces a strategic approach to achieve absolute control over the single-handed helical conformation in a cove-edged NR, utilizing enantiopure [n]helicenes as a molecular wrench to intricately dictate the overall conformation of the NR. Enantiopure [7]helicenes were stitched to the terminal K-regions of a conjugated pyrene NR using a stereospecific and site-selective palladium(II)-catalyzed annulative π-extension (APEX) reaction, resulting in a helically twisted NR with an end-to-end twist of 171°, the second-largest twist reported so far in the literature for twistacenes. The helical end-to-end twist increases with each addition of benzene ring to the central acene core, suggesting that the extra strain induced by the terminal [7]helicenes maintains such a high level of twist. The quantum chemical calculations were conducted to investigate the impact of twisting on the conformational population. At room temperature, the central backbone of the nanoribbon adopts the twisted helicity opposite to that of the attached [7]helicene, constituting around 99\% of the molecular population. For instance, (P)-[7]helicenes produce a left-handed helical nanoribbon, while (M)-[7]helicenes produce a right-handed helical nanoribbon. In the presence of helicenes of opposite chirality, the nanoribbon adopts a waggling conformation. The helically twisted nanoribbons are conformationally robust, as variable temperature chiroptical measurements showed no change in CD and CPL spectra. The proposed strategy, involving the late-stage addition of [n]helicene units through the APEX reaction, appears promising for streamlining the synthesis of diverse cove edge NR variants with desired conformations. In addition to single-handed helically twisted nanoribbons, the symmetry-based functional properties of C2 and C1 symmetric pyrene-fused single and double [n]helicene compounds were studied. Owing to its higher structural rigidity, the C1 symmetric heptagonal ring-containing molecules exhibited exceptional configurational stability along with remarkable chiroptical properties compared to their C2 symmetric as well as pristine helicene congeners.},
  subject      = {Helicene},
  language  = {en}
}
@phdthesis{Weh2024,
  author    = {Weh, Manuel},
  title     = {Chiral Perylene Bisimide Cyclophanes},
  doi       = {10.25972/OPUS-31529},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-315296},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {This work illustrates how the targeted tailoring of supramolecular cavities can not only accomplish high binding due to optimized stereoelectronic shape matches between host and guest but also how molecular engineering of the binding site by a refined substitution periphery of the cavity makes enantiospecific guest recognition and host mediated chirality transfer feasible. Moreover, an enzyme mimic, following the Pauling-Jencks model of enzyme catalysis was realized by the smart design of a PBI host composed of moderately twisted chromophores, which drives the substrate inversion according to the concepts of transition state stabilization and ground state destabilization. The results of this thesis contribute to a better understanding of structure-specific interactions in host-guest complexes as well as the corresponding thermodynamic and kinetic properties and represent an appealing blueprint for the design of new artificial complex structures of high stereoelectronic shape complementarity in order to achieve the goal of sophisticated supramolecular receptors and enzyme mimicry.},
  language  = {en}
}
@article{HoernesFaserlJuenetal.2018,
  author    = {Hoernes, Thomas Philipp and Faserl, Klaus and Juen, Michael Andreas and Kremser, Johannes and Gasser, Catherina and Fuchs, Elisabeth and Shi, Xinying and Siewert, Aaron and Lindner, Herbert and Kreutz, Christoph and Micura, Ronald and Joseph, Simpson and H{\"o}bartner, Claudia and Westhof, Eric and H{\"u}ttenhofer, Alexander and Erlacher, Matthias David},
  title     = {Translation of non-standard codon nucleotides reveals minimal requirements for codon-anticodon interactions},
  series = {Nature Communications},
  volume    = {9},
  journal   = {Nature Communications},
  doi       = {10.1038/s41467-018-07321-8},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-321067},
  year      = {2018},
  abstract  = {The precise interplay between the mRNA codon and the tRNA anticodon is crucial for ensuring efficient and accurate translation by the ribosome. The insertion of RNA nucleobase derivatives in the mRNA allowed us to modulate the stability of the codon-anticodon interaction in the decoding site of bacterial and eukaryotic ribosomes, allowing an in-depth analysis of codon recognition. We found the hydrogen bond between the N1 of purines and the N3 of pyrimidines to be sufficient for decoding of the first two codon nucleotides, whereas adequate stacking between the RNA bases is critical at the wobble position. Inosine, found in eukaryotic mRNAs, is an important example of destabilization of the codon-anticodon interaction. Whereas single inosines are efficiently translated, multiple inosines, e.g., in the serotonin receptor 5-HT2C mRNA, inhibit translation. Thus, our results indicate that despite the robustness of the decoding process, its tolerance toward the weakening of codon-anticodon interactions is limited.},
  language  = {en}
}
@article{HerbstSoberatsLeowanawatetal.2018,
  author    = {Herbst, Stefanie and Soberats, Bartolome and Leowanawat, Pawaret and Stolte, Matthias and Lehmann, Matthias and W{\"u}rthner, Frank},
  title     = {Self-assembly of multi-stranded perylene dye J-aggregates in columnar liquid-crystalline phases},
  series = {Nature Communications},
  volume    = {9},
  journal   = {Nature Communications},
  doi       = {10.1038/s41467-018-05018-6},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-319914},
  year      = {2018},
  abstract  = {Many discoid dyes self-assemble into columnar liquid-crystalline (LC) phases with packing arrangements that are undesired for photonic applications due to H-type exciton coupling. Here, we report a series of crystalline and LC perylene bisimides (PBIs) self-assembling into single or multi-stranded (two, three, and four strands) aggregates with predominant J-type exciton coupling. These differences in the supramolecular packing and optical properties are achieved by molecular design variations of tetra-bay phenoxy-dendronized PBIs with two N-H groups at the imide positions. The self-assembly is driven by hydrogen bonding, slipped π-π stacking, nanosegregation, and steric requirements of the peripheral building blocks. We could determine the impact of the packing motifs on the spectroscopic properties and demonstrate different J- and H-type coupling contributions between the chromophores. Our findings on structure-property relationships and strong J-couplings in bulk LC materials open a new avenue in the molecular engineering of PBI J-aggregates with prospective applications in photonics.},
  language  = {en}
}
@article{HeWuD'Avinoetal.2018,
  author    = {He, Tao and Wu, Yanfei and D'Avino, Gabriele and Schmidt, Elliot and Stolte, Matthias and Cornil, J{\´e}r{\^o}me and Beljonne, David and Ruden, P. Paul and W{\"u}rthner, Frank and Frisbie, C. Daniel},
  title     = {Crystal step edges can trap electrons on the surfaces of n-type organic semiconductors},
  series = {Nature Communications},
  volume    = {9},
  journal   = {Nature Communications},
  doi       = {10.1038/s41467-018-04479-z},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-227957},
  year      = {2018},
  abstract  = {Understanding relationships between microstructure and electrical transport is an important goal for the materials science of organic semiconductors. Combining high-resolution surface potential mapping by scanning Kelvin probe microscopy (SKPM) with systematic field effect transport measurements, we show that step edges can trap electrons on the surfaces of single crystal organic semiconductors. n-type organic semiconductor crystals exhibiting positive step edge surface potentials display threshold voltages that increase and carrier mobilities that decrease with increasing step density, characteristic of trapping, whereas crystals that do not have positive step edge surface potentials do not have strongly step density dependent transport. A device model and microelectrostatics calculations suggest that trapping can be intrinsic to step edges for crystals of molecules with polar substituents. The results provide a unique example of a specific microstructure-charge trapping relationship and highlight the utility of surface potential imaging in combination with transport measurements as a productive strategy for uncovering microscopic structure-property relationships in organic semiconductors.},
  language  = {en}
}
@article{KrausGrimmSeibel2018,
  author    = {Kraus, Michael and Grimm, Clemens and Seibel, J{\"u}rgen},
  title     = {Reversibility of a Point Mutation Induced Domain Shift: Expanding the Conformational Space of a Sucrose Phosphorylase},
  series = {Scientific Reports},
  volume    = {8},
  journal   = {Scientific Reports},
  doi       = {10.1038/s41598-018-28802-2},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-224845},
  year      = {2018},
  abstract  = {Despite their popularity as enzyme engineering targets structural information about Sucrose Phosphorylases remains scarce. We recently clarified that the Q345F variant of Bifidobacterium adolescentis Sucrose Phosphorylase is able to accept large polyphenolic substrates like resveratrol via a domain shift. Here we present a crystal structure of this variant in a conformation suitable for the accommodation of the donor substrate sucrose in excellent agreement with the wild type structure. Remarkably, this conformation does not feature the previously observed domain shift which is therefore reversible and part of a dynamic process rather than a static phenomenon. This crystallographic snapshot completes our understanding of the catalytic cycle of this useful variant and will allow for a more rational design of further generations of Sucrose Phosphorylase variants.},
  language  = {en}
}
@article{GilSepulcreLindnerSchindleretal.2021,
  author    = {Gil-Sepulcre, Marcos and Lindner, Joachim O. and Schindler, Dorothee and Velasco, Luc{\´i}a and Moonshiram, Dooshaye and R{\"u}diger, Olaf and DeBeer, Serena and Stepanenko, Vladimir and Solano, Eduardo and W{\"u}rthner, Frank and Llobet, Antoni},
  title     = {Surface-promoted evolution of Ru-bda coordination oligomers boosts the efficiency of water oxidation molecular anodes},
  series = {Journal of the American Chemical Society},
  volume    = {143},
  journal   = {Journal of the American Chemical Society},
  number    = {30},
  doi       = {10.1021/jacs.1c04738},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-351514},
  pages     = {11651-11661},
  year      = {2021},
  abstract  = {A new Ru oligomer of formula {[Ru-\(^{II}\)(bda-\(\kappa\)-N\(^2\)O\(^2\))(4,4'-bpy)]\(_{10}\)(4,4'-bpy)}, 10 (bda is [2,2'-bipyridine]-6,6'-dicarbox-ylate and 4,4'-bpy is 4,4'-bipyridine), was synthesized and thoroughly characterized with spectroscopic, X-ray, and electrochemical techniques. This oligomer exhibits strong affinity for graphitic materials through CH-\(\pi\) interactions and thus easily anchors on multiwalled carbon nanotubes (CNT), generating the molecular hybrid material 10@CNT. The latter acts as a water oxidation catalyst and converts to a new species, 10'(H\(_2\)O)\(_2\)@CNT, during the electrochemical oxygen evolution process involving solvation and ligand reorganization facilitated by the interactions of molecular Ru catalyst and the surface. This heterogeneous system has been shown to be a powerful and robust molecular hybrid anode for electrocatalytic water oxidation into molecular oxygen, achieving current densities in the range of 200 mA/cm\(^2\) at pH 7 under an applied potential of 1.45 V vs NHE. The remarkable long-term stability of this hybrid material during turnover is rationalized based on the supramolecular interaction of the catalyst with the graphitic surface.},
  language  = {en}
}
@article{GryszelSchlossarekWuerthneretal.2023,
  author    = {Gryszel, Maciej and Schlossarek, Tim and W{\"u}rthner, Frank and Natali, Mirco and Głowacki, Eric Daniel},
  title     = {Water-soluble cationic perylene diimide dyes as stable photocatalysts for H\(_2\)O\(_2\) evolution},
  series = {ChemPhotoChem},
  volume    = {7},
  journal   = {ChemPhotoChem},
  number    = {9},
  issn      = {2367-0932},
  doi       = {10.1002/cptc.202300070},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-370250},
  year      = {2023},
  abstract  = {Photocatalytic generation of hydrogen peroxide, H\(_2\)O\(_2\), has gained increasing attention in recent years, with applications ranging from solar energy conversion to biophysical research. While semiconducting solid-state materials are normally regarded as the workhorse for photogeneration of H\(_2\)O\(_2\), an intriguing alternative for on-demand H\(_2\)O\(_2\) is the use of photocatalytic organic dyes. Herein we report the use of water-soluble dyes based on perylene diimide molecules which behave as true molecular catalysts for the light-induced conversion of dissolved oxygen to hydrogen peroxide. In particular, we address how to obtain visible-light photocatalysts which are stable with respect to aggregation and photochemical degradation. We report on the factors affecting efficiency and stability, including variable electron donors, oxygen partial pressure, pH, and molecular catalyst structure. The result is a perylene diimide derivative with unprecedented peroxide evolution performance using a broad range of organic donor molecules and operating in a wide pH range.},
  language  = {en}
}