@article{EmmertKneisel2017, author = {Emmert, Adrian and Kneisel, Christof}, title = {Internal structure of two alpine rock glaciers investigated by quasi-3-D electrical resistivity imaging}, series = {The Cryosphere}, volume = {11}, journal = {The Cryosphere}, doi = {10.5194/tc-11-841-2017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-157569}, pages = {841-855}, year = {2017}, abstract = {Interactions between different formative processes are reflected in the internal structure of rock glaciers. Therefore, the detection of subsurface conditions can help to enhance our understanding of landform development. For an assessment of subsurface conditions, we present an analysis of the spatial variability of active layer thickness, ground ice content and frost table topography for two different rock glaciers in the Eastern Swiss Alps by means of quasi-3-D electrical resistivity imaging (ERI). This approach enables an extensive mapping of subsurface structures and a spatial overlay between site-specific surface and subsurface characteristics. At Nair rock glacier, we discovered a gradual descent of the frost table in a downslope direction and a constant decrease of ice content which follows the observed surface topography. This is attributed to ice formation by refreezing meltwater from an embedded snow bank or from a subsurface ice patch which reshapes the permafrost layer. The heterogeneous ground ice distribution at Uertsch rock glacier indicates that multiple processes on different time domains were involved in the development. Resistivity values which represent frozen conditions vary within a wide range and indicate a successive formation which includes several advances, past glacial overrides and creep processes on the rock glacier surface. In combination with the observed topography, quasi-3-D ERI enables us to delimit areas of extensive and compressive flow in close proximity. Excellent data quality was provided by a good coupling of electrodes to the ground in the pebbly material of the investigated rock glaciers. Results show the value of the quasi-3-D ERI approach but advise the application of complementary geophysical methods for interpreting the results.}, language = {en} } @article{KnauerGessnerFensholtetal.2017, author = {Knauer, Kim and Gessner, Ursula and Fensholt, Rasmus and Forkuor, Gerald and Kuenzer, Claudia}, title = {Monitoring agricultural expansion in Burkina Faso over 14 years with 30 m resolution time series: the role of population growth and implications for the environment}, series = {Remote Sensing}, volume = {9}, journal = {Remote Sensing}, number = {2}, doi = {10.3390/rs9020132}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-171905}, year = {2017}, abstract = {Burkina Faso ranges amongst the fastest growing countries in the world with an annual population growth rate of more than three percent. This trend has consequences for food security since agricultural productivity is still on a comparatively low level in Burkina Faso. In order to compensate for the low productivity, the agricultural areas are expanding quickly. The mapping and monitoring of this expansion is difficult, even on the basis of remote sensing imagery, since the extensive farming practices and frequent cloud coverage in the area make the delineation of cultivated land from other land cover and land use types a challenging task. However, as the rapidly increasing population could have considerable effects on the natural resources and on the regional development of the country, methods for improved mapping of LULCC (land use and land cover change) are needed. For this study, we applied the newly developed ESTARFM (Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model) framework to generate high temporal (8-day) and high spatial (30 m) resolution NDVI time series for all of Burkina Faso for the years 2001, 2007, and 2014. For this purpose, more than 500 Landsat scenes and 3000 MODIS scenes were processed with this automated framework. The generated ESTARFM NDVI time series enabled extraction of per-pixel phenological features that all together served as input for the delineation of agricultural areas via random forest classification at 30 m spatial resolution for entire Burkina Faso and the three years. For training and validation, a randomly sampled reference dataset was generated from Google Earth images and based on expert knowledge. The overall accuracies of 92\% (2001), 91\% (2007), and 91\% (2014) indicate the well-functioning of the applied methodology. The results show an expansion of agricultural area of 91\% between 2001 and 2014 to a total of 116,900 km\(^2\). While rainfed agricultural areas account for the major part of this trend, irrigated areas and plantations also increased considerably, primarily promoted by specific development projects. This expansion goes in line with the rapid population growth in most provinces of Burkina Faso where land was still available for an expansion of agricultural area. The analysis of agricultural encroachment into protected areas and their surroundings highlights the increased human pressure on these areas and the challenges of environmental protection for the future.}, language = {en} } @article{ForkuorHounkpatinWelpetal.2017, author = {Forkuor, Gerald and Hounkpatin, Ozias K.L. and Welp, Gerhard and Thiel, Michael}, title = {High resolution mapping of soil properties using remote sensing variables in south-western Burkina Faso: a comparison of machine learning and multiple linear regression models}, series = {PLOS One}, volume = {12}, journal = {PLOS One}, number = {1}, doi = {10.1371/journal.pone.0170478}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-180978}, pages = {21}, year = {2017}, abstract = {Accurate and detailed spatial soil information is essential for environmental modelling, risk assessment and decision making. The use of Remote Sensing data as secondary sources of information in digital soil mapping has been found to be cost effective and less time consuming compared to traditional soil mapping approaches. But the potentials of Remote Sensing data in improving knowledge of local scale soil information in West Africa have not been fully explored. This study investigated the use of high spatial resolution satellite data (RapidEye and Landsat), terrain/climatic data and laboratory analysed soil samples to map the spatial distribution of six soil properties-sand, silt, clay, cation exchange capacity (CEC), soil organic carbon (SOC) and nitrogen-in a 580 km2 agricultural watershed in south-western Burkina Faso. Four statistical prediction models-multiple linear regression (MLR), random forest regression (RFR), support vector machine (SVM), stochastic gradient boosting (SGB)-were tested and compared. Internal validation was conducted by cross validation while the predictions were validated against an independent set of soil samples considering the modelling area and an extrapolation area. Model performance statistics revealed that the machine learning techniques performed marginally better than the MLR, with the RFR providing in most cases the highest accuracy. The inability of MLR to handle non-linear relationships between dependent and independent variables was found to be a limitation in accurately predicting soil properties at unsampled locations. Satellite data acquired during ploughing or early crop development stages (e.g. May, June) were found to be the most important spectral predictors while elevation, temperature and precipitation came up as prominent terrain/climatic variables in predicting soil properties. The results further showed that shortwave infrared and near infrared channels of Landsat8 as well as soil specific indices of redness, coloration and saturation were prominent predictors in digital soil mapping. Considering the increased availability of freely available Remote Sensing data (e.g. Landsat, SRTM, Sentinels), soil information at local and regional scales in data poor regions such as West Africa can be improved with relatively little financial and human resources.}, language = {en} } @article{HaunertWolff2017, author = {Haunert, Jan-Henrik and Wolff, Alexander}, title = {Beyond maximum independent set: an extended integer programming formulation for point labeling}, series = {ISPRS International Journal of Geo-Information}, volume = {6}, journal = {ISPRS International Journal of Geo-Information}, number = {11}, doi = {10.3390/ijgi6110342}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-158960}, pages = {342}, year = {2017}, abstract = {Map labeling is a classical problem of cartography that has frequently been approached by combinatorial optimization. Given a set of features in a map and for each feature a set of label candidates, a common problem is to select an independent set of labels (that is, a labeling without label-label intersections) that contains as many labels as possible and at most one label for each feature. To obtain solutions of high cartographic quality, the labels can be weighted and one can maximize the total weight (rather than the number) of the selected labels. We argue, however, that when maximizing the weight of the labeling, the influences of labels on other labels are insufficiently addressed. Furthermore, in a maximum-weight labeling, the labels tend to be densely packed and thus the map background can be occluded too much. We propose extensions of an existing model to overcome these limitations. Since even without our extensions the problem is NP-hard, we cannot hope for an efficient exact algorithm for the problem. Therefore, we present a formalization of our model as an integer linear program (ILP). This allows us to compute optimal solutions in reasonable time, which we demonstrate both for randomly generated point sets and an existing data set of cities. Moreover, a relaxation of our ILP allows for a simple and efficient heuristic, which yielded near-optimal solutions for our instances.}, language = {en} } @article{BanksMillardBehnamianetal.2017, author = {Banks, Sarah and Millard, Koreen and Behnamian, Amir and White, Lori and Ullmann, Tobias and Charbonneau, Francois and Chen, Zhaohua and Wang, Huili and Pasher, Jon and Duffe, Jason}, title = {Contributions of actual and simulated satellite SAR data for substrate type differentiation and shoreline mapping in the Canadian Arctic}, series = {Remote Sensing}, volume = {9}, journal = {Remote Sensing}, number = {12}, doi = {10.3390/rs9121206}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-172630}, year = {2017}, abstract = {Detailed information on the land cover types present and the horizontal position of the land-water interface is needed for sensitive coastal ecosystems throughout the Arctic, both to establish baselines against which the impacts of climate change can be assessed and to inform response operations in the event of environmental emergencies such as oil spills. Previous work has demonstrated potential for accurate classification via fusion of optical and SAR data, though what contribution either makes to model accuracy is not well established, nor is it clear what shorelines can be classified using optical or SAR data alone. In this research, we evaluate the relative value of quad pol RADARSAT-2 and Landsat 5 data for shoreline mapping by individually excluding both datasets from Random Forest models used to classify images acquired over Nunavut, Canada. In anticipation of the RADARSAT Constellation Mission (RCM), we also simulate and evaluate dual and compact polarimetric imagery for shoreline mapping. Results show that SAR data is needed for accurate discrimination of substrates as user's and producer's accuracies were 5-24\% higher for models constructed with quad pol RADARSAT-2 and DEM data than models constructed with Landsat 5 and DEM data. Models based on simulated RCM and DEM data achieved significantly lower overall accuracies (71-77\%) than models based on quad pol RADARSAT-2 and DEM data (80\%), with Wetland and Tundra being most adversely affected. When classified together with Landsat 5 and DEM data, however, model accuracy was less affected by the SAR data type, with multiple polarizations and modes achieving independent overall accuracies within a range acceptable for operational mapping, at 89-91\%. RCM is expected to contribute positively to ongoing efforts to monitor change and improve emergency preparedness throughout the Arctic.}, language = {en} } @article{RichardAbdelRahmanSubramanianetal.2017, author = {Richard, Kyalo and Abdel-Rahman, Elfatih M. and Subramanian, Sevgan and Nyasani, Johnson O. and Thiel, Michael and Jozani, Hosein and Borgemeister, Christian and Landmann, Tobias}, title = {Maize cropping systems mapping using RapidEye observations in agro-ecological landscapes in Kenya}, series = {Sensors}, volume = {17}, journal = {Sensors}, number = {11}, doi = {10.3390/s17112537}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-173285}, year = {2017}, abstract = {Cropping systems information on explicit scales is an important but rarely available variable in many crops modeling routines and of utmost importance for understanding pests and disease propagation mechanisms in agro-ecological landscapes. In this study, high spatial and temporal resolution RapidEye bio-temporal data were utilized within a novel 2-step hierarchical random forest (RF) classification approach to map areas of mono- and mixed maize cropping systems. A small-scale maize farming site in Machakos County, Kenya was used as a study site. Within the study site, field data was collected during the satellite acquisition period on general land use/land cover (LULC) and the two cropping systems. Firstly, non-cropland areas were masked out from other land use/land cover using the LULC mapping result. Subsequently an optimized RF model was applied to the cropland layer to map the two cropping systems (2nd classification step). An overall accuracy of 93\% was attained for the LULC classification, while the class accuracies (PA: producer's accuracy and UA: user's accuracy) for the two cropping systems were consistently above 85\%. We concluded that explicit mapping of different cropping systems is feasible in complex and highly fragmented agro-ecological landscapes if high resolution and multi-temporal satellite data such as 5 m RapidEye data is employed. Further research is needed on the feasibility of using freely available 10-20 m Sentinel-2 data for wide-area assessment of cropping systems as an important variable in numerous crop productivity models.}, language = {en} } @article{UllmannBanksSchmittetal.2017, author = {Ullmann, Tobias and Banks, Sarah N. and Schmitt, Andreas and Jagdhuber, Thomas}, title = {Scattering characteristics of X-, C- and L-Band PolSAR data examined for the tundra environment of the Tuktoyaktuk Peninsula, Canada}, series = {Applied Sciences}, volume = {7}, journal = {Applied Sciences}, number = {6}, doi = {10.3390/app7060595}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-158362}, pages = {595}, year = {2017}, abstract = {In this study, polarimetric Synthetic Aperture Radar (PolSAR) data at X-, C- and L-Bands, acquired by the satellites: TerraSAR-X (2011), Radarsat-2 (2011), ALOS (2010) and ALOS-2 (2016), were used to characterize the tundra land cover of a test site located close to the town of Tuktoyaktuk, NWT, Canada. Using available in situ ground data collected in 2010 and 2012, we investigate PolSAR scattering characteristics of common tundra land cover classes at X-, C- and L-Bands. Several decomposition features of quad-, co-, and cross-polarized data were compared, the correlation between them was investigated, and the class separability offered by their different feature spaces was analyzed. Certain PolSAR features at each wavelength were sensitive to the land cover and exhibited distinct scattering characteristics. Use of shorter wavelength imagery (X and C) was beneficial for the characterization of wetland and tundra vegetation, while L-Band data highlighted differences of the bare ground classes better. The Kennaugh Matrix decomposition applied in this study provided a unified framework to store, process, and analyze all data consistently, and the matrix offered a favorable feature space for class separation. Of all elements of the quad-polarized Kennaugh Matrix, the intensity based elements K0, K1, K2, K3 and K4 were found to be most valuable for class discrimination. These elements contributed to better class separation as indicated by an increase of the separability metrics squared Jefferys Matusita Distance and Transformed Divergence. The increase in separability was up to 57\% for Radarsat-2 and up to 18\% for ALOS-2 data.}, language = {en} }