@phdthesis{AlFarajat2001, author = {Al-Farajat, Mohammad}, title = {Hydrogeo-Eco-Systems in Aquaba/Jordan - Coasts and Region}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-1182066}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2001}, abstract = {The coast of Aqaba and the Aqaba region (Jordan) were investigated on their hydrogeo-ecosystem. The results of the research were translated into digits to build a geo-spatial data base. The fillings of the graben aquifer receive indirect type of recharge through the side wadis which drain the highlands. Surface water balance was modeled for a period of 20 years of daily climate records using MODBIL program which attributes direct recharge to wet years only. The hydrodynamic fresh water/seawater interface in the coastal zones was investigated by applying vertical geoelectric surveys and models of several methods to confirm its coincidence with the aquifer's flow amounts, where human impacts in terms of over-pumping allowed more encroachment of seawater into land, and unintended recharge which led to seaward interface migration. A groundwater balance and solute transport were approached by developing a flow model from the hydrogeological and hydrochemical data. The nature of soil cover and aquifer whose physical properties enhance human impacts indicated the vulnerability of groundwater to pollution. This certainly threatens the marine ecology which forms the sink where the in-excess flow ends. The constructed digital background was exported into GIS to sub-zone the study area in terms of the aquifer's vulnerability to pollution risks using DRASTIC index. However, it was unable to meet all geo-spatial factors that proved to have significant impacts on the vulnerability. Consequently, a comprehensive index -SALUFT- was developed. This suggests the suitable land use units for each zone in the light of vulnerability grades aiming at protecting the available groundwater resources.}, subject = {Golf von Akaba}, language = {en} } @phdthesis{Gehring2001, author = {Gehring, Iris}, title = {Volcanostratigraphy using geophysical methods on La Fossa di Vulcano (S-Italy)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-1181941}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2001}, abstract = {For many active volcanoes all over the world a civil protection program, normally combined with hazard maps, exists. Optimising of hazard maps and the associated hazard assessment implies a detailed knowledge of the volcanostratigraphy, because the deposits provoke information on the potential behaviour during a new activity cycle. Pyroclastic deposits, however, may vary widely in thickness and distribution over very short lateral distances. High resolution characterisation of single strata often cannot be archived, if solely sedimentological and geochemical methods are used. Gamma-ray measurements taken in the field combined with grain-size depended magnetic susceptibility measurements made in the laboratory are used in this work to optimise the resolution of volcanostratigraphic investigations. The island of Vulcano is part of the Aeolian Archipelago sited of the northern coast of Sicily. La Fossa cone is the active centre of Vulcano, where fumarolic and seismic activity can be observed. The cone was built up during the last 6,000 years, whereby the last eruption period is dated to historic times (1888-1890). For the tuff cone La Fossa the most likely volcanic hazards are the emplacement of pyroclastic deposits as well as gas hazards (especially SOx and CO2), due to this the detailed knowledge of the stratigraphy is mandatory. Most of the population resides in Vulcano Porto and the nearby sited peninsula of Vulcanello, which are highly endangered locations for a future eruption scenario. Measurements, made in standard outcrops, allow a characterisation of the successions Punte Nere, Tufi Varicolori, Palizzi, Commenda, and Cratere Attuale. A discrimination of all successions by solely one of the methods is rarely possible. In some cases, however, the combination of the methods leads to clear results. It can also be noticed that the exposition as well as the sedimentation type (wet-surge or dry-surge deposits) affect the measurements. In general it can be assumed that the higher the magma is evolved the higher the g -ray values and the lower the susceptibility values. Measurements from the Wingertsberg (Laacher See deposits, Eifel, W-Germany) show clearly that a higher degree of magma evolution correlates with lower susceptibility and higher gamma-ray values. Variations of the values can be observed not only by the change of the degree of magmatic evolution but also by the inhomogeneous deposition conditions. Particularly the gamma-ray measurements show lower values for the wet-surge deposits than for the dry-surge deposits, even though the erupted material has the same geochemical composition. This can be explained especially by reactions inside of the moist eruption cloud and short-time after deposition, when easily soluble elements like K, U, and Th can be leached by these aggressive fluids. Even extended exposition and high water content can provoke depletion of various elements within the complete or parts of the outcrop, too. If the deposits are affected by a fumarolic activity especially the susceptibility values show significant variations, whereas in general extreme low values are observed. Contamination of deposits also can occur, if they are overlain by weathered deposits of higher concentration of K, U, and Th. Weathering and mobilisation within the upper deposits can generate an element enrichment within the lower deposits. In general the element ratios of the barried underlying deposits are less affected than the exposed ones. After gauging the values of the well defined succession for standard outcrops undefined outcrops were measured. These outcrops are not clearly classified by sedimentological and geochemical methods, thus a correlation with the combined geophysical methods is useful. In general the combination of the methods allows a correlation, although in some cases more than one interpretation is possible. But in connection with time marker horizons as well as sedimentological features an interpretation is feasible. These situations show that a classification solely based on geophysical methods is possible for many cases but, if the volcanic system is more complex, a combination with sedimentological and geochemical methods may be needed. The investigations on Vulcano, documented in this work, recommend a re-interpretation of the dispersial of some successions of La Fossa cone, especially the presumption that Tufi Varicolori only exist inside of the Caldera of La Fossa. As a consequence the eruption and energy model especially for Tufi Varicolori have to be reviewed.}, subject = {Vulcano}, language = {en} } @phdthesis{Brandt2003, author = {Brandt, S{\"o}nke}, title = {Metamorphic evolution of ultrahigh-temperature granulite facies and upper amphibolite facies rocks of the Epupa Complex, NW Namibia}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-10930}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2003}, abstract = {The high-grade metamorphic Epupa Complex (EC) of north-western Namibia constitutes the south-western margin of the Archean to Proterozoic Congo Craton. The north-eastern portion of the EC has been geochemically and petrologically investigated in order to reconstruct its tectono-metamorphic evolution. Two distinct metamorphic units have been recognized, which are separated by ductile shear zones: (1) Upper amphibolite facies rocks (Orue Unit) and (2) ultrahigh-temperature (UHT) granulite facies rocks (Epembe Unit). The rocks of the EC are transsected by a large anorthosite massif, the Kunene Intrusive Complex (KIC). The Orue Unit and the Epembe Unit were affected by two distinct Mesoproterozoic metamorphic events, as is evident from differences in their metamorphic grade, in the P-T paths and in the age of peak-metamorphism: (1) The Orue Unit consists of a Palaeoproterozoic volcano-sedimentary sequence, which was intruded by large masses of I-type granitoids and by rare mafic dykes. During the Mesoproterozoic (1390-1318 Ma) the Orue Unit rocks underwent upper amphibolite facies metamorphism. The volcano-sedimentary sequence is constituted by interlayered basaltic amphibolites and rhyolitic felsic gneisses, with intercalations of migmatitic metagreywackes, migmatitic metapelites, metaarkoses and calc-silicate rocks. The Orue Unit was subdivided into three parts, which record similar heating-cooling paths but represent individual crustal levels: Heating led to the partial replacement of amphibole, biotite and muscovite through dehydration melting reactions. The peak-metamorphic P-T conditions of c. 700°C, 6.5 +/- 1.0 kbar (south-eastern part), c. 820°C, 8 +/- 0.5 kbar (south-western part) and c. 800°C, 6.0 +/- 1.0 kbar (northern part) correlate well with the mineral assemblage in the metapelites, i.e. Grt-Bt-Sil gneisses and schist in the south-eastern and south-western region and (Grt-)Crd-Bt gneisses in the northern part. Peak-metamorphism was followed by retrograde cooling to middle amphibolite facies conditions. Contact metamorphism, related with the intrusion of the anorthosites, is restricted to the direct contact to the KIC and recorded by massive metapelitic Grt-Sil-Crd felses, formed under upper amphibolite facies conditions (c. 750°C, c. 6.5 kbar). (2) The Epembe Unit consists of a Palaeoproterozoic volcano-sedimentary succession, which was intruded by small bodies of S-type granitoids and by andesitic dykes. All these rocks underwent UHT granulite facies metamorphism during the early Mesoproterozoic (1520-1447 Ma). The volcano-sedimentary succession is dominated by interlayered basaltic two-pyroxene granulites and rhyolitic felsic granulites. Migmatitic metapelites and metagreywackes are intercalated in the metavolcanites. Sapphirine-bearing MgAl-rich gneisses occur as restitic schlieren in the migmatitic metagreywackes. Reconstructed anti-clockwise P-T paths are subdivided into several distinct stages: During prograde near-isobaric heating to UHT conditions at c. 7 kbar biotite- or hornblende-bearing mineral assemblages were almost completely replaced by anhydrous mineral assemblages through various dehydration melting reactions. A subsequent pressure increase of 2-3 kbar led to the formation of the peak-metamorphic mineral assemblages Grt-Opx and (Grt-)Opx-Cpx in the orthogneisses and Grt-Opx, Grt-Sil and (Grt-)(Spr-)Opx-Sil-Qtz in the paragneisses. UHT-Metamorphism is proved by conventional geothermobarometry (970 +/- 70°C; 9.5 +/- 2.5 kbar), by the very high Al content of peak-metamorphic orthopyroxene (up to 11.9 wt.\% Al2O3) in many paragneisses and by Opx-Sil-Qtz assemblages in the MgAl-rich gneisses. Post-peak decompression is recorded by several corona and symplectite textures, formed at the expense of the peak-metamorphic phases: Initial UHT decompression of about ca. 2 kbar to 940 +/- 60°C at 8 +/- 2 kbar is mainly evident from the formation of sapphirine-bearing symplectites in the Opx-Sil gneisses. Subsequent high-temperature decompression to 6 +/- 2 kbar at 800 +/- 60°C resulted in the formation of Crd-Opx-Spl, Crd-Opx and Spl-Crd symplectites. Subsequent near-isobaric cooling to upper amphibolite conditions of 660 +/- 30°C at 5 +/- 1.5 kbar led to the re-growth of biotite, hornblende, sillimanite and garnet. During continued decompression orthopyroxene and cordierite were formed at the expense of biotite in several paragneisses. In a geodynamic model UHT metamorphism of the Epembe Unit is correlated with the formation of a large magma chamber at the mantle-crust boundary, which forms the source for the anorthosites of the KIC. In contrast, amphibolite facies metamorphism of the Orue Unit is ascribed to a regional contact metamorphic event, caused by the emplacement of the anorthositic crystal mushes in the middle crust.}, subject = {Namibia }, language = {en} } @phdthesis{Kukulus2004, author = {Kukulus, Matthias}, title = {A quantitative approach to the evolution of the central Walvis Basin offshore NW-Namibia : structure, mass balancing, and hydrocarbon potential}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-11075}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {Rifting and breakup of Westgondwana in the Late Jurassic/ Early Cretaceous initiated the formation of the South Atlantic and its conjugated pair of passive continental margins. The Walvis Basin offshore NW-Namibia is an Early Cretaceous to recent depositional centre with a typically wedge-shaped postrift sedimentary succession covering an area of 105000km2. A 2D model transect across the central Walvis Basin and adjacent onshore areas is used as a case study to investigate quantitatively the denudational history of the evolving passive margin and the related contemporaneous depositional postrift evolution offshore. The database for both the onshore and offshore part of the model traverse is well constrained by own field work, published data as well as by seismic and well data supported by samples. The ultimate goal of this project is to present an integrated approach towards a quantitative link between surface processes and internal processes in terms of a mass and process balance.}, subject = {Namibia }, language = {en} } @phdthesis{Kempf2000, author = {Kempf, J{\"u}rgen}, title = {Klimageomorphologische Studien in Zentral-Namibia: Ein Beitrag zur Morpho-, Pedo- und {\"O}kogenese}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-5325}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2000}, abstract = {Es werden die Ergebnisse mehrj{\"a}hriger geomorphologische, pedologischer und {\"o}kologischer Feldaufnahmen in Namibia vorgestellt. Der Schwerpunkt der Betrachtung lag auf einem West-Ost-Transekt im zentralen Drittel des Landes zwischen dem s{\"u}dlichen Wendekreis und der Etosha-Region. Das Transekt beschreibt einen klima-geomorphologischen {\"U}bergang vom namibischen Schelf, {\"u}ber das Litoral, die Namib-Rumpffl{\"a}che, das Randstufenvorland mit dem Escarpment und das Hochland mit dem Windhoek-Okahandja-Becken bis zu den ausgedehnten Kontinentalbecken der Kalahari. Schelf, Randstufenvorland, Becken und Kalahari stellen dabei potentielle Akkumulationslandschaften, dar, Hochland und Namib-Fl{\"a}che die zugeh{\"o}rigen Abtragungslandschaften. Der geomorphologische Formenschatz der Akkumulations- und Abtragungslandschaften wurde ebenso analytisch beschrieben, wie die landschafts{\"o}kologische Grundausstattung, v. a. B{\"o}den und Vegetation. Die jeweils ablaufenden Prozesse und Prozesskombinationen wurden mit klimatischen Daten in einem {\"O}kosystemmodell verkn{\"u}pft. Mit Hilfe dieses Modells wurden geomorphologische Reliktformen verschiedener Zeitalter im landschaftlichen Zusammenhang {\"o}kogenetisch interpretiert und ein historischer Ablauf der Milieugeschichte seit dem Endterti{\"a}r rekonstruiert. Unterst{\"u}tzend wurden Proxydaten, v. a. pal{\"a}o{\"o}kologische und geoarch{\"a}ologische herangezogen.}, subject = {Zentralnamibia}, language = {de} } @phdthesis{DelveneIbarrola2000, author = {Delvene Ibarrola, Graciela}, title = {Middle and Upper Jurassic bivalves from the Iberian Range (Spain)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-3119}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2000}, abstract = {Previous work on Jurassic bivalves from the Iberian Range is reviewed, whereby emphasis is placed on Callovian-Kimmeridgian species. The taxonomy, distribution pattern and ecology of the bivalve fauna occurring in Middle and Upper Jurassic rocks of the Aragonian Branch of the Iberian Range have been analysed. For this purpose 14 sections and 5 additional outcrops, selected according to the abundance of bivalves, were measured in detail and sampled. The rocks studied belong to the Chelva, Y{\´a}tova, Sot de Chera and Loriguilla formations of Callovian-Kimmeridgian age. The distribution of species of bivalves is given for each section. More than 3000 specimens of bivalves representing 83 species that belong to 46 genera and subgenera of the subclasses Palaeotaxodonta, Pteriomorphia, Isofilibranchia. Palaeoheterodonta, Heterodonta and Anomaldesmata have been used for the taxonomic analysis. One species is new: Plagiostoma fuersichi from the Callovian of the Chelva Fm. The autecology (trophic group and life habit) of each bivalve has been discussed. 49 samples of four sections habe been selected for a quantitative palaeoecological analysis of the bivalve fraction of the benthic fauna. Five bivalve associations and two assemblages are recognised by a Q-mode hierarchical cluster analysis (Ward method). The main environmental factors controlling bivalve associations are thought to be substrate, water energy and distribution of organic matter. The bivalves exhibit a distinct spatial and temporal distribution pattern within the Aragonian Branch. Four of the bivalve associations occur in the Upper Oxfordian (Sot de Chera Fm) and one association in the Lower Callovian (Chelva Fm). In the Sot de Chera and Loriguilla formations, the abundance of bivalves decreases from NW to SE i.e., from relatively close to the shore line towards the distal-most part of the carbonate platform. In the Chelva Fm. bivalves are abundant in the Ari{\~n}o region, interpreted as a palaeogeographic high. The distribution of bivalves might have been largely controlled by the availability of nutrients.}, subject = {Keltiberisches Gebirge}, language = {en} } @phdthesis{Kus2001, author = {Kus, G{\"u}nter}, title = {GIS-gest{\"u}tzte Standortanalyse zur Differenzierung der Ablagerungseignung verschiedener Naturr{\"a}ume Unterfrankens gegen{\"u}ber M{\"u}llverbrennungsschlacken}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-1180603}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2001}, abstract = {Die M{\"u}llverbrennung hat sich in der BRD als wichtiges Glied in der Entsorgungskette etabliert. Bei der thermischen Verwertung f{\"a}llt als Restprodukt u. a. M{\"u}llverbrennungsschlacke (MV-Schlacke) an, die deponiert oder wiederverwertet wird. Eine vollst{\"a}ndige Abtrennung umweltrelevanter Schadstoffe (vorwiegend Schwermetalle) kann mit dem Verfahren der M{\"u}llverbrennung jedoch nicht erreicht werden. Eine nachhaltig umweltbewußte Entsorgung der Schlacke setzt daher voraus, daß sich das Schlacke-Material nach Ablagerung weitestgehend neutral in seiner nat{\"u}rlichen Umgebung verh{\"a}lt. Zahlreiche Untersuchungen verschiedener Autoren haben gezeigt, daß das Auslaugungsverhalten der Schlacke und damit auch das Freisetzen von Schadstoffen bei Ablagerung, sehr stark von den Umgebungsbedingungen abh{\"a}ngt. Wesentlich dabei sind vor allem der Wasserumsatz und die hydrogeochemischen Milieubedingungen im gesamten Ablagerungssystem. Geringe Wasserums{\"a}tze und spezielle pH-Bedingungen des Carbonatpufferbereichs bedingen besonders g{\"u}nstige und stabile Verh{\"a}ltnisse. Daraus ist abzuleiten, daß haupts{\"a}chlich dort gegen{\"u}ber MV-Schlacken langfristig ablagerungsfreundliche Bedingungen herrschen, wo einerseits geringe Wasserums{\"a}tze und andererseits hohes Pufferverm{\"o}gen durch carbonatische Phasen und prinzipiell geringes Wasserleitverm{\"o}gen vorausgesetzt werden k{\"o}nnen. Unter diesen Gesichtspunkten wurden relevante naturr{\"a}umliche Standortfaktoren definiert, die im Rahmen einer modellhaften Standortanalyse f{\"u}r den Raum Unterfanken (Nordbayern) eingesetzt wurden. Die Haltung, Analyse und Bewertung der vielf{\"a}ltigen, raumbezogenen Daten zu den einzelnen Faktoren erfolgte dabei in einem Geoinformationssystem (GIS) mit Datenbankanbindung. In einer abschließenden Synthese wurden alle Faktoren zusammengef{\"u}hrt und hinsichtlich der Ablagerungsfreundlichkeit unterschiedlicher Naturr{\"a}ume Unterfrankens gegen{\"u}ber MV-Schlacke bewertet. Im Modell Standortanalyse wurden Bewertungsans{\"a}tze gew{\"a}hlt, die auf Grundlagen der FUZZY-Logik beruhen. Als wesentliches Ergebnis der Arbeit kann festgehalten werden, daß vorwiegend die Talr{\"a}ume als Ablagerungsstandorte langfristig ungeeignet erscheinen sowie die sandsteindominierten (Spessart, S{\"u}drh{\"o}n, Odenwald) oder vorwiegend von Kristallingestein eingenommenen (Vorspessart) Gebiete mit vergleichsweise hohen Gesamtabflußraten, hohen Durchl{\"a}ssigkeiten sowie geringem Pufferverm{\"o}gen in den Deckschichten. Aufgrund der klimatisch g{\"u}nstigen Position und der geeigneten Deckschichtenverh{\"a}ltnisse erscheinen besonders weite Teile der Mainfr{\"a}nkischen Platten als ablagerungsfreundlich.}, subject = {Unterfranken}, language = {de} } @phdthesis{Seyferth2001, author = {Seyferth, Michael}, title = {Numerische Modellierungen kontinentaler Kollisionszonen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-3220}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2001}, abstract = {Orogene Prozesse in kontinentalen Kollisionszonen werden in zwei- und dreidimensionalen numerischen Modellen auf Basis der Finite-Elemente Methode (FEM) untersucht. Dabei stehen die Verteilung der Deformation innerhalb der Modellkruste, die korrespondierenden Spannungsfelder und die aus Temperaturfelddaten und Partikelpfaden abgeleitete metamorphe Entwicklung von Krustengesteinen im Vordergrund. Die Studie gliedert sich in einen methodischen Teil, umfangreiche Parameterstudien und spezielle Anwendungen auf fossile und rezente Orogene. Kontinentale Kollisionszonen sind - insbesondere in den tieferen Krustenstockwerken - durch hohe Betr{\"a}ge penetrativer Deformation gekennzeichnet. Im methodischen Teil der Arbeit wird eine Technik vorgestellt, mit deren Hilfe Verformungen des beobachteten Umfangs mit dem auf rein LAGRANGEscher Formulierung basierenden kommerziellen FE-Programmpaket ANSYS® modelliert werden k{\"o}nnen. Die speziell f{\"u}r Fragestellungen orogener Krustendynamik entwickelten Programmpakete OROTRACK bzw. OROTRACK3D umfassen Neuvernetzungs- und Ergebnisverwaltungsalgorithmen, die eine Modellierung von Konvergenzbetr{\"a}gen bis zu mehreren hundert Kilometern erlauben. Zus{\"a}tzlich k{\"o}nnen mittels einer Schnittstelle zu Oberfl{\"a}chenmodellen die Folgen exogener Prozesse auf die orogene Dynamik ber{\"u}cksichtigt werden. Weitere Charakteristika der Modellierungstechnik sind eine vollst{\"a}ndige thermomechanische Kopplung, die Anwendung differenzierter Materialeigenschaften f{\"u}r verschiedene Krustenstockwerke sowie die M{\"o}glichkeit, die Deformation - den lokal herrschenden Druck- und Temperaturbedingungen entsprechend - entweder durch spr{\"o}de oder duktile Materialgesetze zu approximieren. Die zur Beschreibung eines Kollisionsszenarios aufgebrachten Randbedingungen basieren auf den Grundlagen eines Mantelsubduktionsmodells (Willett et al. 1993). In 2D-Modellen wird ebene Verformung in einem Schnitt durch die kontinentale Kruste zweier kollidierender Platten modelliert, die basal einer vom lithosph{\"a}rischen Mantel aufgepr{\"a}gten Verschiebung unterliegen. Wird der lithosph{\"a}rische Mantel der linken Platte an einem Punkt S unter die rechte Platte subduziert, ergibt sich f{\"u}r den linken Modellteil eine horizontale Verschiebung der Modellbasis nach rechts, w{\"a}hrend im rechten Modellteil keine Verschiebung der Modellbasis erlaubt ist. Im Bereich des Punktes S kommt es zu einer Diskontinuit{\"a}t der basalen Geschwindigkeit und somit zu maximaler Deformation. In publizierten Kollisionsmodellen, die auf {\"a}hnlichen Ans{\"a}tzen beruhen, wird h{\"a}ufig rein spr{\"o}des Materialverhalten angenommen oder der duktile Anteil der Kruste durch geringe Krustentemperaturen klein und hochviskos gehalten. Unter diesen Bedingungen kann eng auf das Orogenzentrum lokalisierte Deformation mit einem typischerweise bivergenten Strukturmuster abgebildet werden (Willett et al. 1993 u.a.). Demgegen{\"u}ber beweist eine erste Reihe zweidimensionaler Parameterstudien eine starke Abh{\"a}ngigkeit des beobachteten Deformationsmusters von den herrschenden Krustentemperaturen und der Konvergenzrate. Bei h{\"o}heren Krustentemperaturen bildet sich demnach ein Entkopplungshorizont an der Krustenbasis, der f{\"u}r die oberen Krustenstockwerke eine verbreiterte und diffuse Deformationszone bedingt und die erzielte Krustenverdickung limitiert. {\"U}ber die Verformungsratenabh{\"a}ngigkeit des duktilen Materialverhaltens und den unterschiedlichen Grad thermischer Reequilibrierung innerhalb der verdickten Kruste haben Variationen der Konvergenzrate {\"a}hnliche Auswirkungen auf das orogene Deformationsmuster. Verbesserte Modelle mit Neuvernetzungstechnik werden in Parameterstudien getestet, die den Einfluss unterschiedlicher Temperatur-Viskosit{\"a}tsfunktionen auf die Lokalisierung der Deformation und die resultierende synkonvergente Exhumierung metamorpher Gesteine quantifizieren. Ein rheologisches Verhalten, das eine effiziente mechanische Kopplung innerhalb des Krustenprofils gew{\"a}hrleistet, ist demzufolge nicht nur Voraussetzung f{\"u}r lokalisierte Krustenverdickung, sondern auch f{\"u}r rasche Exhumierung von Unterkrustengesteinen durch ein Zusammenspiel von Erosion und isostatischer Hebung. Die Modelle zeigen weiter, dass maximale Exhumierungsbetr{\"a}ge bei rheologisch vergleichsweise festem Verhalten der Unterkruste erzielt werden. Im Einzelnen kann die Variabilit{\"a}t der Versenkungs- und Exhumierungsgeschichte von Materialpunkten im Modellschnitt aus synthetischen PT-Pfaden ersehen werden. Der Wirkungskomplex um Krustentemperaturen, orogene Deformationslokalisierung und synkonvergente Exhumierung ist f{\"u}r die Kollisionsphase der variscischen Orogenese in Mitteleuropa von besonderer Bedeutung. Hochtemperaturmetamorphose und weitverbreitete granitoide Intrusionst{\"a}tigkeit sind hier Ausdruck hoher Krustentemperaturen; dennoch sind an den Grenzen der klassischen tektonometamorphen Einheiten - im Bereich von Schwarzwald und Vogesen sowie der Mitteldeutschen Kristallinschwelle (MDKS) - eng lokalisierte Teilorogene mit bivergentem Strukturmuster sowie eine rasche synkonvergente Exhumierung amphibolitfazieller Gesteine dokumentiert. Ein solches Nebeneinander ist aus Sicht der Parameterstudien nur durch eine vergleichsweise hochviskose Unterkrustenrheologie zu erkl{\"a}ren. In einer Fallstudie zur MDKS kommen in neueren experimentellen Arbeiten bestimmte Kriechparameter (Mackwell et al. 1998) zur Anwendung, mit denen ein derartiges Materialverhalten simuliert werden kann. Der in den reflexionsseismischen Profilen DEKORP 2N und 2S dokumentierte großmaßst{\"a}bliche Strukturbau im Bereich des rhenohercynischen Falten- und {\"U}berschiebungsg{\"u}rtels, der MDKS und des saxothuringischen Beckens, sowie die an heute exhumierten Gesteine bestimmten metamorphen Maximalbedingungen k{\"o}nnen auf dieser Grundlage numerisch reproduziert werden. Eine Erweiterung der Modellierungstechnik auf dreidimensionale FE-Modelle dient der Ber{\"u}cksichtigung orogenparalleler Deformation, die im Randbereich von Kollisionszonen in effektivem Materialtransport resultieren kann; diese Prozesse sind u.a. als „tectonic escape" (Burke \& Seng{\"o}r 1986) oder „lateral extrusion" (Ratschbacher et al. 1991b) beschrieben worden. Unter der Annahme orthogonaler Konvergenz wird im 3D-Modell der Mantelsubduktionsansatz der 2D-Modelle zun{\"a}chst in orogenparalleler Richtung extrudiert (Randbereich des Kollisionsorogens). Im angrenzenden, hinteren Teil des Modells (laterales Vorland des Kollisionsorogens) ist die Modellbasis dagegen keiner Verschiebung oder Fixierung unterworfen. Die Modellr{\"a}nder unterliegen hier einer sogenannten „no-tilt"-Bedingung, die eine differentielle Horizontalverschiebung initial {\"u}bereinanderliegender Knoten verbietet. In einer Reihe von Parameterstudien werden das kinematische Muster, die r{\"a}umliche Verteilung der Deformation und die zeitlichen Variationen des oberfl{\"a}chlichen Spannungsfelds untersucht, die sich bei modifizierten Randbedingungen ergeben. Laterale Extrusion ist demnach im Randbereich von Kollisionsorogenen trotz unterschiedlichster Modellszenarien stets pr{\"a}sent. Da die Lateralbewegungen zeitgleich mit der Kollision einsetzen und im Laufe der weiteren konvergenten Krustenverk{\"u}rzung nur wenig beschleunigt werden, ist der von horizontalen Kr{\"a}ften ausgel{\"o}ste „tectonic escape" der dominierende Prozess, w{\"a}hrend gravitativ induzierte Bewegungen nur eine sekund{\"a}re Rolle spielen. Rigide Modellr{\"a}nder in Teilen des lateralen Vorlands modifizieren sowohl Umfang als auch Verteilung der Horizontalbewegungen, ihre Auswirkungen auf das Orogen selbst sind dagegen vergleichsweise gering. Variationen der Krustentemperaturen, der Konvergenzrate und der Unterkrustenrheologie beeinflussen dagegen sowohl die orogene Deformation als auch die des lateralen Vorlands. Unter der Annahme einer festen, isotropen Kopplung zwischen der Krustenbasis und dem bewegten lithosph{\"a}rischen Mantel werden Extrusionsraten simuliert, die 30\% der Konvergenzrate nicht {\"u}berschreiten. Bis zu 70\% k{\"o}nnen dagegen erreicht werden, wenn eine orogenparallele Beweglichkeit der Modellbasis gestattet wird. Die {\"u}berragende Bedeutung dieser basalen Randbedingung erlaubt eine Interpretation des mioz{\"a}nen lateralen Extrusionsereignisses in den Ostalpen (z.B. Ratschbacher et al. 1991a). Wenn im Bereich der heutigen Ostalpen zu Beginn der lateralen Extrusion noch kein orogene Topographie bestand (Frisch et al. 1998), fand laterale Extrusion zeitgleich mit bedeutender Krustenverdickung statt; dies spricht f{\"u}r eine Dominanz des von horizontalen Kr{\"a}ften induzierten Prozesses „tectonic escape" {\"u}ber gravitatives Kollabieren. In jedem Fall legt das in etwa ausgeglichene Verh{\"a}ltnis zwischen Plattenkonvergenz und lateraler Extrusion die Existenz eines basalen Entkopplungshorizonts nahe. Andere Faktoren, die zur Erkl{\"a}rung des Extrusionsereignisses herangezogen werden, z.B. die Indentation der S{\"u}dalpen oder ein extensives Regime im Bereich des Pannonischen Beckens, k{\"o}nnen das Deformationsmuster beeinflusst haben, die beobachteten Verschiebungsbetr{\"a}ge sind damit jedoch aus Sicht der Modellstudien nicht plausibel zu machen. Aufgrund ihres großen Maßstabs lassen sich die Verh{\"a}ltnisse bei der Kollision Indiens mit der Eurasischen Platte bislang nur ph{\"a}nomenologisch mit den Modellergebnissen vergleichen. Eine skalierte Fallstudie bleibt somit eine Herausforderung f{\"u}r zuk{\"u}nftige FE-Modelle.}, subject = {Subduktion}, language = {de} } @phdthesis{Drueppel2003, author = {Dr{\"u}ppel, Kirsten}, title = {Petrogenesis of the Mesoproterozoic anorthosite, syenite and carbonatite suites of NW Namibia and their contribution to the metasomatic formation of the Swartbooisdrif sodalite deposits}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-6987}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2003}, abstract = {During the Mesoproterozoic large volumes of magma were repeatedly emplaced within the basement of NW Namibia. Magmatic activity started with the intrusion of the anorthositic rocks of the Kunene Intrusive Complex (KIC) at 1,385-1,347 Ma. At its south-eastern margin the KIC was invaded by syenite dykes (1,380-1,340 Ma) and younger carbonatites (1,140-1,120 Ma) along ENE and SE trending faults. Older ferrocarbonatite intrusions, the 'carbonatitic breccia', frequently contain wallrock fragments, whereas subordinate ferrocarbonatite veins are almost xenolith-free. Metasomatic interaction between carbonatite-derived fluids and the neighbouring and incorporated anorthosites led to the formation of economically important sodalite deposits. Investigated anorthosite samples display the magmatic mineral assemblage of Pl (An37-75) ± Ol ± Opx ± Cpx + Ilm + Mag + Ap ± Zrn. Ilmenite and pyroxene are surrounded by narrow reaction rims of biotite and pargasite. During the subsolidus stage sporadic coronitic garnet-orthopyroxene-quartz assemblages were produced. Thermobarometry studies on amphiboles yield temperatures of 985-950°C whereas the chemical composition of coronitic garnet and orthopyroxene indicate a subsolidus re-equilibration of the KIC at conditions of 760 ± 100°C and 7.3 ± 1 kbar. In the syenites Kfs, Pl, Hbl and/or Cpx crystallized first, followed by a second generation of Kfs, Hbl, Fe-Ti oxides and Ttn. Crystallization of potassium feldspar occurred under temperatures of 890-790°C. For the crystallization of hastingsite pressures of 6.5 ± 0.6 kbar are obtained. In order to constrain the source rocks of the two suites, oxygen isotope analyses of feldspar as well as geochemical bulk rock analyses were carried out. In case of the anorthosites, the general geochemical characteristics are in excellent agreement with their derivation from fractionated basaltic liquids, with the d18O values (5.88 ± 0.19 per mille) proving their derivation from mantle-derived magmas. The results obtained for the felsic suite, provide evidence against consanguinity of the anorthosites and the syenites, i.e. (1) compositional gaps between the geochemical data of the two suites, (2) trace element data of the felsic suite points to a mixed crustal-mantle source, (3) syenites do not exhibit ubiquitous negative Eu-anomalies in their REE patterns, which would be expected from fractionation products of melts that previously formed plagioclase cumulates and (4) feldspar d18O values from the syenites fall in a range of 7.20-7.92 per mille, which, however, is about 1.6 per mille higher than the average d18O of the anorthosites. Conformably, the crustal-derived felsic and the mantle-derived anorthositic suite are suggested to be coeval but not consanguineous. Their spatial and temporal association can be accounted for, if the heat necessary for crustal melting is provided by the upwelling and emplacement of mantle-derived melts, parental to the anorthosites. In order to constrain the source of the 1,140-1,120 Ma carbonatites and to elucidate the fenitizing processes, which led to the formation of the sodalite, detailed mineralogical and geochemical investigations, stable isotope (C,O,S) analyses and fluid inclusion measurements (microthermometrical studies and synchrotron-micro-XRF analyses) have been combined. There is striking evidence that carbonatites of both generations are magmatic in origin. They occur as dykes with cross-cutting relationships and margins disturbed by fenitic aureoles, and contain abundant flow-oriented xenoliths. The mineral assemblage of both carbonatite generations of Ank + Cal + Ilm + Mag + Bt ± Ap ± pyrochlore ± sulphides in the main carbonatite body and Ank + Cal + Mag ± pyrochlore ± rutile in the ferrocarbonatite veins, their geochemical characteristics and the O and C isotope values of ankerite (8.91 to 9.73 and -6.73 to -6.98, respectively) again indicate igneous derivation, with the 18O values suggesting minor subsolidus alteration. NaCl-rich fluids, released from the carbonatite melt mainly caused the fenitization of both, the incorporated and the bordering anorthosite. This process is characterized by the progressive transformation of Ca-rich plagioclase into albite and sodalite. Applying conventional geothermobarometry combined with fluid-inclusion isochore data, it was possible to reconstruct the P-T conditions for the carbonatite emplacement and crystallization (1200-630°C, 4-5 kbar) and for several mineral-forming processes during metasomatism (e.g. formation of sodalite: 800-530°C). The composition and evolutionary trends of the fenitizing solution were estimated from both the sequence of metasomatic reactions within wallrock xenoliths in the carbonatitic breccia and fluid inclusion data. The fenitizing solutions responsible for the transformation of albite into sodalite can be characterised as of NaCl-rich aqueous brines (19-30 wt.\% NaCl eq.), that contained only minor amounts of Sr, Ba, Fe, Nb, and LREE.}, subject = {Namibia }, language = {en} } @phdthesis{Loewe2003, author = {L{\"o}we, Peter}, title = {Methoden der K{\"u}nstlichen Intelligenz in Radarmeteorologie und Bodenerosionsforschung}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-7594}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2003}, abstract = {Die Dissertation "Methoden der K{\"u}nstlichen Intelligenz in Radarmeteorologie und Bodenerosionsforschung" besch{\"a}ftigt sich mit der Erfassung des Parameters der potentiellen Erosivit{\"a}t vor dem Hintergrund der Bodenerosionsproblematik S{\"u}dafrikas. Basierend auf der Betrachtung der Erosivit{\"a}t einzelner Niederschlagsereignisse wird demonstriert, wie durch wissensbasierte Ans{\"a}tze aus Wetterradardatens{\"a}tzen fl{\"a}chendeckende Niederschlagsinformationen gewonnen werden k{\"o}nnen. Diese dienen als Eingangsdaten f{\"u}r ein Erosivit{\"a}tsmodell, das aus Zellul{\"a}ren Automaten aufgebaut wird. Die Ergebnisse des Erosivit{\"a}tsmodells werden vorgestellt und diskutiert.}, subject = {S{\"u}dafrika}, language = {de} }