TY - THES A1 - Nashed, Alexander T1 - Entwicklung spinnfähiger Precursorpolymere zur Herstellung nicht-oxidischer Keramikfasern T1 - Development of spinnable precursor polymers for the production of non-oxide ceramic fibers N2 - Ausgehend von chlorhaltigem Oligosilan, erhalten durch Disproportionierung der „Disilan-Fraktion“ der Müller-Rochow-Synthese, wurde mit verschiedenen Aminen dechloriert bzw. strukturell modifiziert. Die auf diese Weise in das Oligosilan eingeführten Baugruppen wurden spektroskopisch und durch Vergleich mit geeigneten Modellverbindungen identifiziert. Vernetzungsgrad und keramische Ausbeute der erzeugten Materialen wurden bestimmt. Mit Ammoniak oder einwertigen Aminen wie Methylamin werden Produkte erhalten, die sich nicht zu Keramikfasern verarbeiten lassen. Letzteres scheitert daran, dass entweder keine signifikante Molekulargewichtserhöhung des Oligosilans erreicht wird, oder führt dazu, dass das Oligomer vergelt und damit in Toluol unlöslich wird. Durch Umsetzung des Oligosilans mit zweiwertigen Aminen wie EDA oder TMDA als Vernetzungsreagenz gelang es, eine Syntheseroute zu entwickeln, die – anders als bei der am ISC etablierten Route – keinen thermischen Vernetzungsschritt erfordert, d.h. die gesamte Synthese findet bei Temperaturen ≤200 °C statt. Hierbei wird eine kontrollierbare Erhöhung des Molekulargewichts erreicht. Die Verwendung von TMDA hat gegenüber EDA den Vorteil, dass aufgrund des Ausbleibens von Ringbildung ein höher vernetztes Polymer erhalten wird. Darüber hinaus wurde gefunden, dass Grünfasern während der Pyrolyse durch radikalisch vernetzbare Gruppen (C=C-Doppelbindungen) im Polymer stabilisiert werden können. Diese Gruppen lassen sich entweder durch Dechlorierung mit Allylamin oder durch Umsetzung mit Vinyl-Grignard-Reagenzien einführen. Allylamin erwies sich hierbei als geeigneter, da es preiswerter und leichter handhabbar ist und außerdem – im Gegensatz zu Vinyl-Grignard-Reagenzien – eine vollständige Dechlorierung des Polymers gestattet. Alle Polymere wurden auf ihre Verarbeitbarkeit zu Grün- und anschließend zu Keramikfasern untersucht. Hierbei wurde gefunden, dass die im Hinblick auf die Eigenschaften der resultierenden Keramikfasern günstigste Rezeptur in der Umsetzung eines zuvor mit DMA vollständig dechlorierten Oligosilans mit 18,2 mol-% TMDA und 40 mol-% Allylamin (bezogen auf NMe2-Gruppen) besteht. Die aus diesem Polymer erhaltenen Keramikfasern zeigen die für noch nicht technisch ausgereifte, im Stadium der Entwicklung befindliche Fasern typischen Festigkeiten und entsprechen damit denjenigen, die auf der am ISC bereits etablierten Route erhältlich sind. Dies macht sie zu aussichtsreichen Kandidaten für die weitere Optimierung. N2 - Based on chlorine containing oligosilane which is synthesized via disproportionation of the “disilane fraction” of the Müller-Rochow synthesis, there have been dechlorinations respectively structural modifications with different amines. The structural components introduced into the oligosilane by this means were identified spectroscopically and by comparison with appropriate model compounds. The degree of crosslinking and the ceramic yield of the generated materials were detected. By the use of ammonia or primary amines like methylamine products are generated which cannot be converted to ceramic fibers. The latter fails because either no significant increase of the molecular weight of the oligosilane is obtained or the oligosilane gels and becomes insoluble in toluene. By the reaction of oligosilane with secondary amines like EDA or TMDA as a crosslinking reagent it succeeded to develop a synthesis route which – different from the route established at the ISC – doesn’t require any thermic crosslinking step what means that the whole synthesis takes place at temperatures ≤200°C. In this connection a controllable increase of the molecular weight is reached. The use of TMDA has the advantage over EDA that due to the absence of ring formation a higher cross-linked polymer is obtained. Furthermore it was found that green fibers can be stabilized during pyrolysis with radically curable groups (C=C double bonds) inside the polymer. These groups can be introduced either by dechlorination with allylamine or by reaction with vinyl Grignard reagents. Allylamine was proven to be more suitable because it is low-cost and easier to handle and besides – in comparison to vinyl Grignard reagents – it allows a complete dechlorination of the polymer. All polymers were analyzed concerning their processability to green and subsequent to ceramic fibers. Here it was found that the most favorable recipe with respect to the properties of the resulting ceramic fibers consists in the reaction of fully with DMA dechlorinated oligosilane with 18.2 mol-% TMDA and 40 mol-% allylamine (based on NMe2-groups). The ceramic fibers obtained from this polymer show typical stabilities as they are not yet technically mature and in the stage of development. For this reason they correlate with the ones which are already available by the established route at the ISC. This makes them to promising candidates for further optimization. KW - Keramikfaser KW - Polymerisation KW - Oligosilane KW - ceramic fibers KW - Precursorpolymer KW - SiC Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138517 ER -