TY - THES A1 - Önel, Ayla T1 - Synthese und Relevanz von Oxylipinen in Blättern, Wurzeln und Samen von \(Arabidopsis\) \(thaliana\) T1 - Synthesis and relevance of oxylipins in leaves, roots and seeds of \(Arabidopsis\) \(thaliana\) N2 - Die Lipidoxidation kann sowohl enzymatisch als auch nicht enzymatisch erfolgen. Der erste Schritt der enzymatischen Oxidation wird durch Lipoxygenasen katalysiert, von welchen es in Arabidopsis thaliana sechs verschiedene Isoformen gibt. Dabei werden die Lipoxygenasen nach dem Kohlenstoffatom klassifiziert, welches sie oxidieren. Somit gehören die LOX1 und LOX5 zu den 9-Lipoxygenasen, während LOX2, LOX3, LOX4 und LOX6 zu den 13 Lipoxygenasen zählen. Während der Samenalterung findet vermehrt eine Lipidperoxidation statt, welche mit einem Verfall des Samens sowie einer verringerten Keimrate korreliert. Im Rahmen dieser Arbeit wurde zunächst erfolgreich ein System zur künstlichen Samenalterung von Arabidopsis thaliana etabliert. Bei der künstlichen Alterung stiegen ähnlich wie bei der natürlichen Samenalterung oxidierte Lipide an und die Keimrate fiel ab. Nach Alterung konnte ein Anstieg von sechs verschiedenen oxidierten Triacylglycerolen detektiert werden. Es konnte in dieser Arbeit mit Hilfe von Mutanten mit Defekten in mehreren der Lipoxygenase Gene gezeigt werden, dass die Oxidation dieser veresterten Fettsäuren zum größten Teil nicht enzymatisch erfolgt. Bei der Alterung stiegen zudem enzymatisch gebildete 9 Lipoxygenase Produkte wie freie Hydroxy- und Ketofettsäuren an. Bei einer Analyse der freien oxidierten Fettsäuren konnte ebenfalls mit Lipoxygenase Mutanten ermittelt werden, dass diese hauptsächlich via LOX1 oxidiert werden. Die Untersuchung der Keimraten der Lipoxygenase Mutanten nach Alterung zeigte in mehreren Versuchen eine leicht erhöhte Keimrate der lox1 im Vergleich zum Wildtyp. Eine exogene Behandlung von Wildtyp Samen mit verschiedenen 9-Lipoxygenase Produkten, welche bei der Alterung ansteigen, führte allerdings nicht zu einer Keimungshemmung. Somit scheinen Produkte wie Hydroxy- und Ketofettsäuren der 9-Lipoxygenase LOX1 nicht die Hauptursache für die Keimungshemmung nach Alterung zu sein. Darüber hinaus konnte in dieser Arbeit gezeigt werden, dass eine Behandlung der Blüten des Wildtyps mit Methyljasmonat zu einer signifikant höheren Keimrate der Samen im Vergleich zu Samen von unbehandelten Pflanzen nach Alterung führt. Ein „Lipidprofiling“ der Samen von mit Methyljasmonat behandelten Pflanzen wies signifikant geringere Gehalte sowohl an freien als auch veresterten oxidierten Fettsäuren auf, was mit einer erhöhten Lebensfähigkeit korrelierte. Diese Erkenntnisse könnten von großer Relevanz für die Landwirtschaft sein, falls eine Übertragung auf Nutzpflanzen möglich ist. Ein weiterer Schwerpunkt dieser Arbeit war eine eingehende Untersuchung der Rolle und Funktion der LOX6. Mit Hilfe von GUS Färbungen konnte eine Lokalisation der LOX6 in Blättern und Wurzeln nachgewiesen werden. Zudem wurde ein 35SLOX6GFP Konstrukt erstellt und in Arabidopsis thaliana Pflanzen stabil transformiert. Mit den selektionierten Linien könnte in Zukunft auch die intrazelluläre Lokalisation der LOX6 untersucht werden. Außerdem wurden Konstrukte mit dem Reportergen GFP und AOS sowie LOX2 hinter dem 35S Promotor kloniert, welche ebenfalls für weitere Lokalisations- und Kolokalisationsstudien genutzt werden können. Zudem wurde mit der Klonierung eines Konstruktes begonnen, um in Zukunft einen spezifischen LOX6 Antikörper herstellen und auch die endogene LOX6 Lokalisation in dem Wildtyp analysieren zu können. Um die Produkte der LOX6 zu untersuchen, wurden 35SLOX6 Linien sowie die lox6 Mutante verwendet. Obwohl Hydroxyfettsäuren und Jasmonate Folgeprodukte der LOX6 sind, wiesen die 35SLOX6 Linien weder basal, noch nach Stress erhöhte Gehalte dieser im Vergleich zum Wildtyp auf. Somit geben die 35SLOX6 Linien einen Hinweis darauf, dass LOX6 im Wildtyp nicht limitierend für die Produktion von Hydroxyfettsäuren und Jasmonaten sein könnte. Um zu untersuchen, ob das Substrat der LOX6 der limitierende Faktor sein könnte, wurde eine Behandlung mit α Linolensäure durchgeführt. Dabei entstanden allerdings nicht mehr Folgeprodukte der LOX6, sondern es fand sowohl in den 35SLOX6 Linien als auch in dem Wildtyp eine massive nicht enzymatische radikalische Oxidation der Fettsäuren statt. Um festzustellen, ob sich durch eine LOX6 Überexpression das Metabolom ändert, wurde eine „untargeted Analyse“ mit 35SLOX6 Linien durchgeführt. Diese zeigte vier Metabolite, welche in den 35SLOX6 Linien im Vergleich zum Wildtyp unterschiedlich stark vorhanden waren. Zudem sollte untersucht werden, ob sich die Physiologie und Stressresistenz in den Überexpressionslinien im Vergleich zum Wildtyp unterscheiden. Dabei zeichneten sich die 35SLOX6 Linien durch kleinere, hellere und rundere Blätter aus. Zudem wurden die Wurzeln der 35SLOX6 Linien bei Fraßversuchen mit Pocellio scaber im Vergleich zum Wildtyp weniger bevorzugt gefressen. Diese Erkenntnisse sowie die generierten Konstrukte und Pflanzenlinien können in der Zukunft einen weiteren Einblick in die vielfältigen Funktionen und Produkte der LOX6 gewähren. N2 - Lipidoxidation can take place enzymatically and non-enzymatically. The first step of the enzymatic oxidation is catalysed via lipoxygenases. In Arabidopsis thaliana there are six lipoxygenase isoforms. The lipoxygenases are characterized by the carbon atom they oxidise. LOX1 and LOX5 are 9-lipoxygenases, while LOX2, LOX3, LOX4 and LOX6 are 13 lipoxygenases. During seed ageing lipid peroxidation takes place, which correlates with a deterioration of the seed and a lower germination rate. First, a method for artificial ageing of Arabidopsis thaliana seeds was successfully established as a part of this work. During artificial seed ageing, oxidised lipids increased and the germination rate decreased similar to natural ageing. During artificial ageing an accumulation of six oxidised triacylglycerols could be detected. In this work, it could be shown with the help of mutants with defects in the lipoxygenase genes, that the oxidation of esterified fatty acids mainly takes place non-enzymatically. Moreover, enzymatically formed free 9-lipoxygenase products such as hydroxy and keto fatty acids increase during the process of ageing. An analysis of the free fatty acids in lipoxygenase mutants lead to the conclusion that they are formed primarily by LOX1. The lox1 mutant showed a slightly higher germination rate than the wild type after seed ageing in the majority of the experiments. However, an exogenous treatment of wild type seeds with free 9-lipoxygenase products, which increase during ageing, did not inhibit the germination rate. Therefore, LOX1 (9-lipoxygenase) products like hydroxy and keto fatty acids do not seem to be the main cause for the inhibition of germination after ageing. In addition, this work shows that a methyl jasmonate treatment of wild type flowers leads to a significant higher germination rate of their seeds after ageing in comparison to the seeds of untreated wild type plants. A lipid profiling revealed significantly lower levels of oxidised esterified as well as free fatty acids after ageing in seeds of treated wild type plants compared to untreated ones, which correlates with a higher germination rate. These findings could be of great value for the agriculture if they are transferable to crop plants. Another focus of this work was set on investigating the function and relevance of LOX6. The localization of LOX6 in leaves and roots could be confirmed with the help of GUS stainings. Furthermore, a 35SLOX6GFP construct was generated and stably transformed in Arabidopsis thaliana plants. With the selected lines it will be possible to investigate the intracellular localization of LOX6 in the future. Moreover, constructs with the reporter gene GFP and AOS or LOX2 were cloned behind the 35S promoter which can also be used for additional localization and co-localization experiments. To analyse the endogenous localization of LOX6 in the wild type, the cloning of a construct was started to generate a specific antibody in the future. To investigate the different products of LOX6, 35SLOX6 lines and the lox6 mutant were used. Although hydroxy fatty acids and jasmonates are secondary products of LOX6, neither basal nor after different stress treatments elevated levels could be detected in the overexpression lines compared to the wild type. This finding indicates that LOX6 may not be limiting for the production of jasmonates and hydroxy fatty acids in the wild type. Moreover, to investigate if the substrate of LOX6 could be a limiting factor, a treatment with α linolenic acid was performed. However, this did not lead to more LOX6 secondary products but rather to a massive increase of non-enzymatic radical triggered oxidation of fatty acids in the 35SLOX6 lines as well as in the wild type. To examine whether an overexpression of LOX6 leads to changes in the metabolom, an untargeted analysis with 35SLOX6 lines was performed. This analysis revealed four metabolites, which were present in different amounts in 35SLOX6 lines and the wild type. Apart from that, the physiology and stress resistance of the 35SLOX6 lines should be investigated for differences compared to the wild type. The overexpression lines exhibited smaller, rounder and paler leaves. In feeding experiments, the roots of 35SLOX6 plants were less attractive to the rough woodlouse Porcellio scaber than the wild type. The insights of this work, together with the generated constructs and plant lines could help to gain a better understanding of the versatile functions and products of LOX6 in the future. KW - Jasmonate KW - Lipoxygenase KW - Oxylipine KW - Samen KW - Arabidopsis thaliana KW - Jasmonate KW - Künstliche Samenalterung KW - Lipoxygenase 6 KW - Oxylipine Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-141647 ER - TY - THES A1 - Wolfsteiner, Ulrike T1 - Kombination von arteriovenöser extrakorporaler Lungenassistenz und Hochfrequenzoszillation im Großtier-ARDS-Modell: Einfluss auf den Gasaustausch T1 - Combination of arteriovenous extracorporeal lung assist and high-frequency oscillatory ventilation in an animal-model of ARDS: influence on gas exchange N2 - Hintergrund: Durch den Einsatz der Hochfrequenzoszillationsbeatmung (HFOV) kann das applizierte Tidalvolumen minimiert und dadurch das Risiko für alveolären Scherstress reduziert werden, allerdings resultieren höhere Oszillationsfrequenzen in einer insuffizienten CO2-Elimination mit Entstehung einer Hyperkapnie und respiratorischen Azidose. In dieser experimentellen Studie wurde die Auswirkung verschiedener Oszillationsfrequenzen bei der HFOV auf die CO2-Elimination mit und ohne die Hinzunahme einer arteriovenösen extrakorporalen Lungenassistenz (avECLA) im Großtier-ARDS-Modell untersucht. Unsere Hypothese: die Verwendung hoher Oszillationsfrequenzen und damit die Minimierung des Tidalvolumens erfordert die Kombination einer HFOV mit einer avECLA, um Normokapnie zu erhalten oder wiederherzustellen. Methodik: Hierzu wurden acht gesunde Pietrain-Schweine (56,5 ± 4,4 kg) narkotisiert und intubiert und anschließend mittels pulmonaler Lavage ein schweres iatrogenes ARDS herbeigeführt. Nach einstündiger Stabilisierungsphase (PaO2 durchgehend < 80 mmHg) erfolgte ein Recruitment-Manöver und die Einstellung des mittleren Atemwegsdrucks auf 3 cmH2O über dem zuvor bestimmten unteren Inflektionspunkt. Anschließend wurden die Tiere der HFOV zugeführt, randomisiert und mit entweder auf- oder absteigenden Oszillationsfrequenzen jeweils 30 Minuten mit und ohne Hinzunahme der avECLA beatmet. Ergebnisse: Ab Oszillationsfrequenzen von 9 Hz entwickelten die Versuchstiere ohne die Hinzunahme einer avECLA zügig eine Hyperkapnie, welcher nur durch die Hinzunahme der avECLA entgegengewirkt werden konnte. Durch das Recruitment-Manöver und die Einstellung des mittleren Atemwegsdrucks auf 3 cmH2O über dem unteren Inflektionspunkt konnte die Oxygenierung dauerhaft signifikant verbessert werden (p<0.05). Die Ergebnisse der beiden Gruppen (auf- vs. absteigende Oszillationsfrequenzen) unterschieden sich dabei nicht voneinander. Zusammenfassung: Bei der Hochfrequenzoszillationsbeatmung (HFOV) konnte Normokapnie bei Oszillationsfrequenzen von 9 – 15 Hz nur durch die Kombination mit einer arteriovenösen extrakorporalen Lungenassistenz (avECLA) aufrecht erhalten werden. Zusätzlich konnte nach dem Recruitment-Manöver und der Einstellung des mittleren Atemwegsdrucks auf 3 cmH2O über dem unteren Inflektionspunkt auch noch bei sehr hohen Oszillationsfrequenzen eine dauerhafte, signifikante Verbesserung der Oxygenierung verzeichnet werden. Somit demaskiert die avECLA das lungenprotektive Potential der HFOV: die Minimierung der applizierten Tidalvolumina begrenzt nicht nur eine alveoläre Überblähung und damit Volutraumata, die Applikation höherer mittlerer Atemwegsdrücke ermöglicht darüber hinaus ein pulmonales Recruitment und schützt die Lunge damit vor Atelekttraumata. N2 - Background: During high-frequency oscillatory ventilation (HFOV) the applied tidal volume can be minimized and thereby reduce the risk of alveolar shear stress, however, higher oscillatory frequencies result in insufficient CO2-elimination with development of hypercapnia and respiratory acidosis. In this experimental study, the effect of different oscillatory frequencies in HFOV in regards to CO2-elimination with or without the combination with an arteriovenous extracorporeal lung assist (av-ECLA) was investigated in an animal-model of ARDS. Our hypothesis: the use of high oscillation frequencies and therefore the minimization of tidal volume requires the combination of HFOV with av-ECLA to maintain or reestablish normocapnia. Methods: Therefore eight healthy pigs (56.5 ± 4.4 kg) were anesthetized and intubated, followed by a pulmonary lavage to induce a severe iatrogenic ARDS. After a stabilisation period of 60 minutes (PaO2 continuously < 80 mmHg) a recruitment maneuver was performed and mean airway pressure was adjusted 3 cmH2O above the previously determined lower inflection point. The animals were then transferred to HFOV, randomized and ventilated with either ascending or descending oscillatory frequencies for 30 minutes alternating with and without av-ECLA. Results: At oscillatory frequencies of 9 Hz and above without av-ECLA, the animals rapidly developed a hypercapnia, which could only be counteracted by combining HFOV with av-ECLA. Due to the recruitment maneuver and the adjustment of the mean airway pressure to 3 cmH2O above the lower inflection point, the oxygenation could be significantly improved throughout the trial (p<0.05). The results of both groups (ascending vs. descending oscillatory frequencies) did not differ from each other. Conclusion: During high-frequency oscillatory ventilation (HFOV) with oscillatory frequencies of 9 - 15 Hz, normocapnia could only be maintained by the combination with an arteriovenous extracorporeal lung assist (av-ECLA). In addition, after recruitment maneuver and the adjustment of the mean airway pressure to 3 cmH2O above the lower inflection point, a permanent and significant improvement in the oxygenation could be observed, even at very high oscillation frequencies. Therefore, the av-ECLA unmasks the lung-protective potential of HFOV: the minimization of the applied tidal volume not only limits an alveolar over-inflation and therefore volutrauma; the application of higher mean airway pressures also enables pulmonary recruitment and therefore protects the lung from atelecttrauma. KW - ARDS KW - av-ECLA KW - Hochfrequenz-Oszillations-Ventilation KW - ARDS Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150828 ER - TY - THES A1 - Wiegner, Armin T1 - Auswirkungen der gepaarten Stimulation des Hörnerven und des Nervus vagus auf die spektrale Plastizität im auditorischen Kortex der mongolischen Wüstenrennmaus T1 - Effects of paired stimulation of auditory nerve and vagus nerve on spectral plasticity in auditory cortex of the Mongolian gerbil N2 - Das Cochlea-Implantat (CI) ermöglichte bereits >300 000 hochgradig hörgeschädigten Menschen weltweit eine grundsätzlich wiederhergestellte Hörfunktion. Es wird angenommen, dass sich das Sprachverständnis von CI-Trägern verbessert, wenn die funktionale Trennung der CI-Kanäle erhöht wird. Neben verschiedenen auf die auditorische Peripherie beschränkten Ansätzen gibt es Überlegungen, eine verbesserte Kanaltrennung durch die Rehabilitation taubheitsinduzierter Degenerationen in der spektralen Verarbeitung im zentralen auditorischen System zu erreichen. Es konnte in ertaubten Tieren bislang allerdings kein adäquates CI-Stimulationsmuster beschrieben werden, dass es erlaubte, eine gezielte neuronale Plastizität in der spektralen Verarbeitung zu induzieren. Die Arbeitsgruppe um M.P. Kilgard (UT Dallas, USA) zeigte in mehreren Studien in hörenden Tieren, dass auditorische Stimulation gepaart mit elektrischer Vagusnerv-Stimulation (VNS) zu einer gezielten kortikalen Plastizität führt. Diese gepaarte Stimulation konnte die spektrale Verarbeitung von Signalen im auditorischen Kortex (AC) gezielt beeinflussen und so z.B. pathologisch verbreiterte Repräsentationen von Tönen wieder verfeinern. Dieses hochgradige Potential für gezielte Plastizität im AC durch die gepaarte VNS scheint eine vielversprechende Lösung darzustellen, um die durch verbreiterte Repräsentation im ertaubten AC verminderte CI-Kanaltrennung zu verbessern. Vor diesem Hintergrund sollte in der vorliegenden Promotion die Übertragbarkeit dieses hochgradigen Potentials auf das ertaubte und CI-stimulierte auditorische System evaluiert werden. Um die CI-Kanaltrennung zu untersuchen, wurde ein Multikanal-CI für die Mongolische Wüstenrennmaus (Gerbil) entwickelt. Trotz der kleinen Ausmaße von Cochlea und AC im Gerbil und der generell breiten neuronalen Erregung durch intracochleäre elektrische Stimulation konnte eine tonotop organisierte und selektive Repräsentation der neuronalen Antworten für mehrere CI-Kanäle im AC nachgewiesen werden. Für die gepaarte CI/VN-Stimulation wurden die Tiere zusätzlich mit einer Manschettenelektrode um den linken zervikalen Nervus vagus (VN) implantiert. Die chronischen Implantate erlaubten über mehrere Wochen hinweg eine stabile und zuverlässige elektrische Stimulation im frei-beweglichen Gerbil. Damit kombiniert das in dieser Promotion entwickelte Multikanal-CI-VNS-Modell die Vorteile einer tonotop selektiven und stabilen neuronalen Aktivierung mit den ethischen, kostenrelevanten und entwicklungsbezogenen Vorteilen, die der Einsatz von Kleinnagern bietet. Als nächster Schritt wurde das grundsätzliche Potential der gepaarten CI/VN-Stimulation für gezielte plastische Veränderungen im AC des Gerbils getestet. Engineer et al. (2011) hatten bereits in akustischen Studien in hörenden Ratten die kortikale Überrepräsentation eines einzelnen chronisch mit VNS gepaarten Tones gezeigt. In der vorliegenden Promotion wurde versucht, die Ergebnisse aus der akustischen Studie in hörenden Ratten in zwei verschiedenen Studien im Gerbil zu reproduzieren. Analog zur gepaarten Ton/VN-Stimulation in der Ratte untersuchten wir zuerst in ertaubten Gerbils die Auswirkungen einkanaliger CI-Stimulation gepaart mit VNS. Im AC des Gerbils konnten keine Veränderung der zentralen Repräsentation des VNS gepaarten CI-Kanals festgestellt werden. Um speziesspezifische (Ratte vs. Gerbil) und stimulusspezifische (akustisch vs. elektrisch) Unterschiede zwischen den Studien als mögliche Gründe für das Ausbleiben der VNS induzierten Plastizität auszuschließen, wurde nun die gepaarte Ton/VN-Stimulation (Engineer et al., 2011) im hörenden Gerbil wiederholt. Eine kortikale Überrepräsentation des VNS gepaarten Signals konnte aber auch im hörenden Gerbil nicht reproduziert werden. Mögliche Gründe für die Diskrepanz zwischen unseren Ergebnissen im Gerbil und den publizierten Ergebnissen in der Ratte werden diskutiert. Die generelle Funktionsfähigkeit der VNS in den chronisch stimulierten Tieren wurde durch die Ableitung VNS evozierter Potentiale (VNEP) kontrolliert. Ein speziesspezifischer Unterschied erscheint bei der biologischen Nähe von Ratte und mongolischer Wüstenrennmaus unwahrscheinlich, kann allerdings durch die vorliegenden Studien nicht vollständig ausgeschlossen werden. Eine Abhängigkeit des plastischen Potentials der gepaarten VNS von der Stimulationsintensität ist bekannt. Da Ratten und Gerbils ähnliche VNEP-Schwellen zeigten und mit identischen VNS-Amplituden stimuliert wurden, gehen wir davon aus, dass Unterschiede im plastischen Potential gepaarter VNS zwischen beiden Spezies nicht auf die verwendete Stimulationsintensität zurückzuführen sind. Die beschriebene Diskrepanz im Potential für kortikale Plastizität durch gepaarte VNS weckt Zweifel an der Übertragbarkeit des für die Ratte publizierten Potentials auf andere Spezies, einschließlich des Menschen. N2 - Worldwide, cochlear implants (CI) successfully restored hearing in >300 000 severely hearing- impaired patients. It is assumed that speech discrimination ability of CI users can be improved by increasing the number of functionally independent CI-channels. Aside from several approaches that focus on manipulations of the auditory periphery, there are considerations to target the central auditory system in order to improve CI-channel discrimination by restoring deafness-induced degradations in the neuronal spectral processing of auditory signals. Despite several studies in deaf animals on the effects of chronic CI-stimulation on the spectral representation of electric signals in the central auditory system, it was not yet possible to identify CI-stimulation patterns that were effecttive in inducing directed neuronal plasticity. In hearing animals, M.P. Kilgard and colleagues (UT Dallas, USA) showed that auditory stimulation paired with electric vagus nerve stimulation (VNS) can induce targeted cortical plasticity. The stimulus-specific potential of such paired stimulation was found to affect spectral signal processing in auditory cortex (AC) and was successfully used to restore pathologically expanded representations of acoustic tones. This powerful potential of paired VNS for directed plasticity in AC appears to be a promising approach to improve deafness-induced degradations in CI-channel representation in the central auditory system. The aim of this project was, therefore, to test the potential of paired CI/VN-stimulation on spectral neuronal plasticity in the deaf auditory system. To investigate spectral interactions to intracochlear stimulation in the central auditory system, a multichannel CI for the Mongolian gerbil was developed. Despite the small scale of the gerbil cochlea and AC and despite the well-known broad spread of electric activation with a CI, tonotopic and selective representations of neuronal responses to several CI-channels were demonstrated in AC. To test the effects of paired CI/VN-stimulation on spectral signal processing, animals were implanted with a cuff electrode around the left cervical vagus nerve (VN). Chronic implants provided effective and reliable stimulation for several weeks in the free-moving gerbil. Taken together, the here described multichannel-CI-VNS-model combines the advantages of tonotopically selective and stable neuronal activation with the ethical, cost-related and developmental advantages of using rodents in auditory research. As a next step, the potential of paired CI/VN-stimulation for directed plastic changes in the gerbil AC was tested. In acoustic studies in hearing rats, Engineer et al. (2011) had already reported the cortical overrepresentation of a single tone that was paired with VNS. In this project, we tried to reproduce the results of this acoustic study by two different studies in the Mongolian gerbils. First, analogue to the paired tone/VN-stimulation in the rat we investigated the effects of single channel CI-stimulation paired with VNS in the deaf gerbil. Results showed no effect of VNS on the spectral representation of the paired CI-channel in gerbil AC. To exclude species-specific (rat vs. gerbil) and stimulus-specific (acoustic vs. electric) differences between the two studies as potential causes underlying the lack of VNS-induced plasticity, we next repeated the paired tone/VN stimulation (Engineer et al. 2011) in the hearing gerbil. Again, a change in the cortical representation of the VNS-paired signal could not be reproduced in the hearing gerbil. Potential reasons for the discrepancy between our results in gerbils and the published results in rats are discussed. The general efficacy of VNS in the chronically stimulated animals was controlled by measuring VNS evoked potentials (VNEP). A species-specific difference seems to be unlikely, because of the biological proximity of rat and gerbil, but cannot fully be excluded by the present studies. It is known that the plastic potential of paired VNS is dependent on the stimulation level. Given that both rats and gerbils revealed similar VNEP thresholds and were stimulated with identical VNS-amplitudes, we conclude that differences in the plastic potential of paired VNS between both species are not explained by the used stimulation intensity. The described discrepancy in the potential of paired VNS for cortical plasticity creates doubt about the simple transferability of the plastic potential reported in rat to other species, including humans. KW - Hörrinde KW - Plastizität KW - Vagus KW - Cochlear-Implantat KW - Mongolische Rennmaus KW - gepaarte Vagusnerv-Stimulation KW - Auditorischer Kortex Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-135887 ER - TY - THES A1 - Wennemann, Benedikt T1 - Untersuchungen zur Synthese und Reaktivität von Übergangsmetallborylenkomplexen der Gruppe 8 T1 - Synthesis and reactivity of group 8 borylene complexes N2 - Zusammenfassung Die vorliegende Arbeit wurde in drei Teilbereiche untergliedert. Der erste Teil beschäftigte sich mit der Untersuchung des anionischen Systems K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) und dessen Reaktivität gegenüber Dihalogenboranen. Der zweite Teil widmete sich der Untersuchung der Reaktivät des Eisenbis(borylen)komplexes 45 gegenüber verschiedenen Lewis-Basen und Lewis-Säuren. Im letzten Teil der Arbeit wurde die Insertion von Metallfragmenten der Übergangsmetalle der Gruppe 8 in die M=B-Doppelbindung des Borylenkomplexes 28 untersucht. Durch Umsetzungen der anionischen Osmiumverbindung 64 mit Cl2BDur und Br2BDur konnten die Borylkomplexe 67 und 68 erhalten werden (SCHEMA 56). Die Untersuchungen zum sterischen Einfluss des Silylsubstituenten zeigten, dass die Osmiumkomplexe 65 und 66 mit SiEt3- bzw. SiPh3-Substituenten in die entsprechenden Borylkomplexe überführt werden können, wobei diese Spezies nicht analysenrein isoliert werden konnten. Der Borylkomplex 68 konnte nachfolgend weder unter thermischen Bedingungen, noch unter Verwendung der Lewis-Base Pyridin bzw. des Halogenabstraktionsmittels Na[BArCl4] in einen terminalen Osmiumborylenkomplex umgewandelt werden (Schema 57). Anfängliche Studien zur Reaktivität der anionischen Rutheniumverbindungen 81-83 gegenüber Dihalogenboranen haben sich auf den sterischen Einfluss der borgebundenen Arylsubstituenten konzentriert. Hierdurch konnte gezeigt werden, dass eine Ph-Substitution keine ausreichende Stabilisierung der entstehenden Borylkomplexe liefert. Im Gegensatz dazu erwies sich der sterische Anspruch von Duryl- und Mesitylsubsituenten als ideal für die Bildung stabiler Borylkomplexe, wohingegen die sterische Überfrachtung der Supermesityl- und Terphenylsubstituenten eine Salzeliminierungsreaktion von vornherein verhindert. Der Einfluss des Halogensubstituenten in X2BDur (X = Cl, Br) wurde anhand der Reaktivität gegenüber 81 näher untersucht. In beiden Fällen konnten die entsprechenden Borylkomplexe 84 und 85 isoliert und charakterisiert werden. Da bei der Umsetzung mit Br2BDur auch noch weitere Produkte zu erkennen waren, wurde der sterische Einfluss des Silylsubstituenten in 82 und 83 auf die Produktverteilung bei Reaktion mit Br2BDur untersucht. Es hat sich gezeigt, dass die Wahl der Reaktionsbedingungen einen starken Einfluss auf den Reaktionsverlauf ausübt. So konnte durch regelmäßiges Entgasen der Reaktionslösung der Rutheniumborylenkomplex 86 erhalten werden, während eine thermische Reaktionsführung unter CO-Atmosphäre selektiv zu einer Silylboraneliminierung führte, dessen Produkt indirekt über die Bildung von [(OC)4Ru(PMe3)] (75) nachgewiesen werden konnte (Schema 59). Während die Umsetzung der analogen Eisenspezies K[(OC)3Fe(PMe3)(SiEt3)] (92) mit Cl2BDur lediglich zu Zersetzung führte, konnte im Verlauf der Reaktion mit Br2BDur eine neue, sehr interessante Reaktivität beobachtet werden. Hier war die Salzeliminierungsreaktion mit einer Alkylboraneliminierung verbunden, wobei der intermediär entstehende Silylenkomplex (95) in situ zum dinuklearen, zweifach-verbrückten Bis(silylen)komplex 94 dimerisierte (SCHEMA 60). Unter photolytischen Bedingungen konnte 94 weiter in den dreifach-verbrückten Bis(silylen)komplex 96 überführt werden, welcher den ersten strukturell charaktersierten Komplex dieser Art darstellt. In SCHEMA 61 sind alle relevanten Reaktivitäten des Systems K[(OC)3M(PMe3)(SiR3)] gegenüber X2BDur (X = Cl, Br) zusammen mit den Ergebnissen vorangegangener Arbeiten in einer Übersicht dargestellt. Der zweite Teil dieser Arbeit beschäftigte sich mit der Reaktivität des Eisenbis(borylen)komplexes [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Zunächst wurde 45 mit verschiedenen Lewis-Basen umgesetzt. Während die Umsetzungen mit verschiedenen NHCs (IMe, IMes, IDipp) nur zu Zersetzung führte, konnte durch die Reaktion mit cAACMe der außergewöhnliche Komplex 98 isoliert und vollständig charakterisiert werden (SCHEMA 62). Dieser stellt das erste Beispiel für eine intramolekulare Spaltung eines Carbonylliganden in einem einkernigen Komplex dar. Anschließend wurde die Reaktivität von 45 gegenüber den Lewis-Säuren BBr3, AlBr3 und GaBr3 untersucht. Während die Umsetzung von 45 mit AlBr3 lediglich zu Zersetzung führte, konnte mit GaBr3 als Hauptprodukt Br2BDur nachgewiesen werden. In einem möglichen Reaktionsmechanismus ist die Reaktion mit einer 1,2-Addition des GaBr3 unter Bildung eines Gallylkomplexes verbunden, welcher nach Abspaltung von Br2BDur in einen instabilen Gallylenkomplex übergeht (SCHEMA 63). Die Umsetzung von 45 mit BBr3 lieferte bei tiefen Temperaturen den zweikernigen Tris(borylen)komplex 100 (SCHEMA 64), welcher ein Analogon des wohlbekannten Fe2(CO)9 darstellt. Das abschließende Kapitel dieser Arbeit befasste sich mit der Insertion von Metallfragmenten der Gruppe 8-Übergangsmetalle in die M=B-Doppelbindung von [(OC)5Mo=BN(SiMe3)2] (28). Während bei den Umsetzungen von 28 mit [(OC)4Fe(PMe3)] (90) und [(OC)4Ru(PMe3)] (75) die MOLPs 104 und 105 nur NMR-spektroskopisch nachgewiesen werden konnten, war die Isolierung des MOLPs 103 sowie dessen strukturelle Charakterisierung möglich (SCHEMA 65). Bemerkenswert ist hierbei, dass die Reaktion sowohl unter thermischen als auch unter photolytischen Bedingungen durchgeführt werden kann. N2 - Summary The first part of this work focused on the development of a new route to neutral terminal group 8 transition metal borylene complexes. Thus, the reactivity of the anionic system K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) towards dihaloboranes was studied in detail. The second part of this work dealt with the reactivity studies of the iron bis(borylene) complex 45 towards common lewis bases and acids. The final part of this work concentrated on the insertion of group 8 transition metal fragments into the M=B double bond of the molybdenum borylene complex 28. The reaction of the anionic osmium complex 64 with X2BDur (X = Cl, Br) resulted in the formation of the osmium boryl complexes 67 and 68 (SCHEME 1). Studies concerning the steric influence of the silyl substituent showed that the osmium species 65 and 66 containing SiEt3 and SiPh3 groups can also be converted into the respective boryl complexes, while the resulting products could not be isolated. All attempts to convert the osmium boryl complex 68 into an osmium borylene complex, either under thermal conditions or by reaction with lewis bases and halide abstracting reagents, consistently failed (SCHEME 2). Initial studies on the reactivity of the anionic ruthenium complexes 81-83 towards dihaloboranes focused on the steric influence of the aryl ligand on boron. The results clearly showed that the small phenyl substituent is not able to efficiently stabilize the resulting boryl complexes. By contrast, the steric demand of the mesityl and duryl ligands appeared to be sufficient to afford stable boryl complexes, while supermesityl and terphenyl substituents were sterically too encumbered even for the initial salt elimination step (SCHEME 3). The influence of the halide substituents in X2BDur (X = Cl, Br) was evaluated by reactivity studies towards 81. In both cases, boryl complexes 84 and 85 could be isolated and fully characterized. However, reaction of 81 with Br2BDur suggested the formation of additional products, for which reason the steric influence of the silyl substituents in 81 and 82 on the nature of the products was studied in detail. It turned out that the reaction conditions have a strong influence on the observed pathways. Thus, periodical degassing favoured the formation of the neutral terminal ruthenium borylene complex 86, while thermal treatment under an atmosphere of CO led to silyl borane elimination (SCHEME 4). While the reaction of the analogous iron species K[(OC)3Fe(PMe3)(SiEt3)] (92) with Cl2BDur resulted in decomposition, reaction with Br2BDur uncovered a new, highly interesting reactivity pattern. Here, initial salt elimination was followed by alkyl borane elimination step while the in situ generated silylene complex readily dimerized to form the dinuclear bis(silylene) complex 94 (SCHEME 5). Photolysis of 94 in solution subsequently converted 94 into the triply-bridged dinuclear complex 96, which is the first structurally characterized example of this class of compounds. The second part of this work focused on the reactivity of the iron bis(borylene) complex [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Intitally, 45 was reacted with different lewis bases. While reaction with NHCs (IMe, IMes, IDipp) only resulted in decomposition, reaction with cAACMe enabled the isolation of the uncommon complex 98 (SCHEME 7), which represents the first example of an intramolecular carbonyl cleavage in a mononuclear complex. Next, the reactivity of 45 towards lewis acids BBr3, AlBr3 and GaBr3 was studied. While reaction of 45 with AlBr3 was accompanied by decomposition, reaction with GaBr3 selectively afforded Br2BDur as the main product. A plausible mechanism involves the 1,2-addition of GaBr3 to afford a gallyl species, which subsequently eliminates Br2BDur to generate a labile gallylene complex (SCHEME 8). At low temperatures, the reaction of 45 with BBr3 resulted in the formation of the dinuclear tris(borylene)complex 100 (SCHEME 9), which can be considered an analogue of the well-known [Fe2(CO)9]. The final part of this work was concerned with the insertion of group 8 transition metal fragments into the M=B-double bond of [(OC)5Mo=BN(SiMe3)2] (28). While the reaction of 28 with [(OC)4Fe(PMe3)] (90) and [(OC)4Ru(PMe3)] (75) afforded the MOLPs 104 and 105, which could only be identified by NMR-spectroscopy, the isolation and structural characterization of the MOLP product 103 of the reaction with [(OC)4Os(PMe3)] (59) was feasible (SCHEME 10). Remarkably, this reaction can be carried out both under thermal and photolytic conditions. KW - Borylgruppe KW - Borylenkomplexe KW - Borylkomplexe KW - Übergangsmetallkomplexe Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130755 ER - TY - THES A1 - Wehle, Sarah T1 - In silico Studien zu Bis-Tacrinen, Chinazolinen und Chinazolinonen sowie Synthese von Chinazoliniumverbindungen als Inhibitoren von Cholinesterasen T1 - In silico studies concerning bis-tacrines, quinazolines and quinazolinones and syntheses of quinazolinium compounds as inhibitors of cholinesterases N2 - Die Alzheimer'sche Erkrankung wird derzeit durch die Gabe von Acetylcholinesterase- Inhibitoren (AChEI) symptomatisch behandelt. Durch die AChE-Hemmung steht mehr Acetylcholin (ACh) für die Neurotransmission zur Verfügung. Bei Progression der Erkran-kung nimmt der Anteil an AChE drastisch ab, so dass die Enzymisoform Butyrylcholin- esterase (BChE) die Hydrolyse des Neurotransmitters ACh übernimmt. In späten Phasen der Alzheimer'schen Erkrankung ist daher der Einsatz selektiver BChE-Hemmer erfolgsver- sprechend. Inhibitoren können verschiedene Bindestellen in der Cholinesterase-Bindetasche adressie-ren und dadurch in dieser stabilisiert werden. Zu den Bindestellen zählen die katalytisch aktive Stelle (CAS) am Ende eines 20 Å langen Bindetaschentunnels, die Oxyanion-Vertie-fung, die Cholinbindestelle, sowie die periphere anionische Bindestelle (PAS), welche am Bindetascheneingang lokalisiert ist. In der vorliegenden Arbeit wurden durch in silico Dockingstudien gezielt Protein-Ligand- Interaktionen untersucht, um Strukturmerkmale hochaffiner Inhibitoren von Cholinesterasen zu identifizieren. Damit soll die zukünftige Entwicklung von Cholinesteraseinhibitoren hinsichtlich der Affinität zum Enzym verbessert werden. Ferner dienten synthetische Untersuchungen eines Naturstoffes dazu, Chinazoliniumverbindungen als Leitstruktur für die Inhibition der Cholinesterasen zu etablieren. Für hochaffine tri- und tetrazyklische aminsubstituierte AChE-selektive Chinazolin- und Chinazolinoninhibitoren sollte die bevorzugte Orientierung der Liganden in der Bindetasche ermittelt werden. Hierfür ist die Lokalisation des Aminsubstituenten in der CAS (invertierter Bindemodus) oder die dortige Bindung des Chinazolin-/Chinazolinongerüstes (klassischer Bindemodus) denkbar. Anhand eines präferierten einheitlichen Bindemodus sollten die Struktur-Aktivitäts-Beziehungen erklärt werden. Dockingstudien zeigten die klare Präferenz für den invertierten Bindemodus, bei dem der Aminsubstituent in der Nähe der CAS platziert wird. Ein strukturelles Merkmal für hochaffine Inhibitoren ist ein unter Assaybedingungen protoniertes Amin, welches eine Kation-π-Wechselwirkung zu dem Indolringsystem des Tryptophans der Cholinbindestelle eingehen kann. Für das Ligandengrundgerüst wurde lediglich für tetrazyklische Verbindungen eine π-π-Interaktion mit der peripheren Bindestelle (PAS) am Bindetascheneingang identifiziert. Der Datensatz umfasste auch chirale Chinazolinon- und Chinazolinderivate mit hydrierter C=N-Doppelbindung, die eine schwächere Affinität zu AChE zeigten. Diese ist vermutlich auf das nicht-planare Ligandengrundgerüst zurückzuführen, da vor allem für tetrazyklische chi-rale Verbindungen die Stabilisierung des Ligandengrundgerüstes durch π-π-Interaktionen am Bindetascheneingang aufgrund der Sterik entweder gar nicht, oder nur für ein Enantio-mer möglich ist. Aufgrund der nanomolaren Affinität der achiralen Chinazolin- und Chinazolinonverbindungen wurden weitere gerichtete Wechselwirkungen in der Bindetasche erwartet. Derartige Wechselwirkungen konnten in Form von Wasserstoffbrücken durch die Verwendung von sieben ausgewählten strukturellen Wassermolekülen im Docking identifiziert werden. Durch diese Wassermoleküle werden Wasserstoffbrücken vom Ligandengrundgerüst zum Protein vermittelt. Diese Wechselwirkungen scheinen essentiell für die Stabilisierung hoch-affiner Chinazolin- und Chinazolinoninhibitoren in der AChE-Bindetasche zu sein. Zwei photochrome Bis-Tacrin-Konstitutionsisomere (Ring-geöffnete und Ring-geschlossene Form) inhibieren die AChE und zeigen einen unterschiedlichen Effekt in der Hemmung der Amyloid-β Fibrillenbildung. Die Fibrillenbildung wird durch eine unbesetzte periphere Bindestelle (PAS) am Eingang der AChE-Bindetasche katalysiert, weshalb eine unterschiedliche Interaktion der Liganden mit ebendieser Bindestelle vermutet wird. Dockingstudien lieferten für beide Konstitutionsisomere einen ähnlichen Bindemodus, der vor dem Hintergrund der ähnlichen IC50-Werte von 4.3 und 1.8 nM für die Ring-geöffnete und Ring-geschlossene Form plausibel erscheint. Durch die Auswahl einer geeigneten Röntgenstruktur wurden Dockinglösungen erhalten, bei denen ein Tacrinsubstituent in der PAS bindet und dort π-π-Interaktionen mit einem Tryptophan und einem Tyrosin eingeht. Eine solche Lage des PAS-bindenden Tacrinsubstituenten ist energetisch bevorzugt und drückt sich durch bessere Scores gegenüber Dockinglösungen, bei denen dieser auf der Protein-oberfläche lokalisiert ist, aus. Der andere Tacrinsubstituent bindet in der CAS wie dies von bereits kristallisierten Tacrinderivaten bekannt ist. Mittels molekulardynamischer Simulati-onen wurde die Stabilität der Protein-Dockinglösungs-Komplexe beider Konstitutionsiso-mere verglichen. Dabei wurde die bessere Stabilisierung des CAS-bindenden Tacrinsubsti-tuenten für die Ring-geöffnete Form des Liganden ermittelt. Ferner zeigt sich für die Ring-geöffnete Inhibitorform während der Simulation der Einstrom von sechs Wassermolekülen in einen Hohlraum der PAS. Dies hat zur Folge, dass der PAS-bindende Tacrinsubstituent während der Hälfte der Simulationszeit durch Wasserstoffbrücken in der PAS stabilisiert wird. Ein Wasserstoffbrückennetzwerk diesen Ausmaßes kann für die Ring-geschlossene Inhibitorform nicht ermittelt werden. Die bessere Hemmung der Amyloid-β Fibrillenbildung der Ring-geöffneten Inhibitorform wird daher auf die bessere Stabilisierung des Liganden durch Wasserstoffbrücken in der AChE-Bindetasche zurückgeführt. Für carbamatsubstituierte Tetrahydrochinazolinverbindungen sollten die bevorzugten Interaktionen in der BChE-Bindetasche ermittelt werden. Die Carbamatverbindungen sind pseudo-irreversible Inhibitoren und zeigen eine zeitabhängige Hemmung mit diversen Interaktionszuständen zwischen Protein und Ligand. Darüber hinaus stellen Dockingstudien in der BChE bislang eine Herausforderung dar, da es derzeit nur zwei Röntgenstrukturen dieses Enzyms mit reversiblen Liganden gibt, weshalb kaum Studien zur Identifikation einer geeigneten Bewertungsfunktion durchgeführt werden können. Im Docking wurde sich für die Analyse des reversiblen Anlagerungskomplexes entschieden, da das Docking des tetraedrischen Übergangszustandes energetisch entartete Dockinglösungen lieferte. Eine weitere Herausforderung stellte die Größe der BChE-Bindetasche dar, die auch im reversiblen Docking entartete Dockinglösungen lieferte. Aufgrund einer ähnlichen Übertragungsrate aller getesteten Inhibitoren wurde eine konservierte Lage des Carbamates in der Bindetasche angenommen. Deshalb wurde eine repräsentative Dockinglösung einer Referenzverbindung als Ausgangspose für einen Modelling-Ansatz gewählt, die hinsichtlich der Interaktionen in der Bindetasche ausgewählt wurde. Diese Interaktionen sind: 1) Eine Wasserstoffbrückendistanz zwischen der Carbamat-Carbonylgruppe und der Oxyanion-Vertiefung sowie 2) eine Distanz, die den nucleophilen Angriff des Serins auf den Carbamatkohlenstoff erlaubt. Im Modelling-Ansatz wurde die repräsentative Bindepose dazu verwendet die entsprechenden Inhibitoren in der Bindetasche aufzubauen. Die bevorzugte Position der N-Methylgruppe wurde für beide Enantiomere über die berechneten Spannungsenergien der Bindeposen abgeschätzt. Für die S-Enantiomere ergab sich die präferierte Bindung mit quasi-„axialer“ Methlygruppe und für die R-Enantiomere mit quasi-„äquatorialer“ Stellung dieser. Die Carbamatstrukturen liegen somit mit der Heptylkette in der Acyltasche und die Ligandengrundgerüste werden in einer Seitentasche der BChE-Bindetasche platziert, in der hydrophobe Wechselwirkungen dominieren. Zusätzlich zu den hochaffinen Chinazolinonverbindungen sollten artverwandte Chinazolini-umverbindungen als Leitstruktur für Cholinesteraseinhibitoren untersucht werden. Zunächst erfolgten Studien zur chemischen Reaktivität und Stabilität des Naturstoffes Dehydroevodiamin (DHED) sowie seines Benz-Derivates (Benz-DHED). Insbesondere Benz-DHED war unter den bisher verwendeten und in der Literatur beschriebenen Synthesemethoden instabil. Die Untersuchungen erforderten daher zunächst die Einführung einer geeigneten Syntheseroute, in diesem Fall die Oxidation mit KMnO4, einhergehend mit der Verbesserung der Ausbeute und ohne Nebenproduktbildung. Für die zukünftige Synthese von Derivaten wurde die Verwendung einer geeigneten Lewis-Säure-labilen Schutzgruppe herausgearbeitet. Die untersuchten Chinazoliniumverbindungen zeigen die Eigenschaft, dass sie in Abhängigkeit der Reaktionsbedingungen in zwei Formen (Ring-geöffnet und Ring-geschlossen = Chi-nazoliniumsalz) isoliert werden können. Mittels UV/Vis-Untersuchungen wurde das Gleich-gewicht dieser Spezies aufgeklärt und in wässrigen alkalischen Lösungen die Anreicherung einer dritten, bislang nicht in diesem Zusammenhang beschriebenen, Spezies beobachtet. Als biologisch aktive Spezies konnte die Chinazoliniumform identifiziert werden. In Dockingstudien der Chinazoliniumform von Benz-DHED, nach dem für Carbamatverbindungen entwickelten Modelling-Ansatz, konnte auch hierfür die Stabilisierung der Docking- lösung über eine Wasserstoffbrücke in der BChE-Bindetasche zu einem strukturellen Wassermolekül identifiziert werden. Dies verdeutlicht erneut, dass die Berücksichtigung von Wassermolekülen in Dockingstudien dazu dienen kann zusätzliche Protein-Ligand-Interaktionen festzustellen. Auf Grundlage der Forschung zu Chinazoliniumverbindungen kann die zukünftige Inhibitorentwicklung von Strukturen basierend auf dieser Substanzklasse erfolgen. Die durchgeführten synthetischen und theoretischen Studien liefern wichtige Beiträge zum Verständnis der Wechselwirkungen zwischen Inhibitoren und Cholinesterasen, die in der zukünftigen Inhibitorentwicklung Anwendung finden können. N2 - Alzheimer's disease is currently treated symptomatically by the administration of acetyl-cholinesterase inhibitors (AChEI). By AChE inhibition more acetylcholine (ACh) is available for neurotransmission. During disease progression the amount of AChE drastically decreases, so that the enzyme butyrylcholinesterase (BChE) takes over hydrolysis of this neurotransmitter. In late stages of Alzheimer's disease, the use of selective BChE in-hibitors may therefore be advantageous. Inhibitors can adress different binding sites in the cholinesterase binding pocket. The bind-ing sites includes the catalytic active site (CAS), which is located at the end of a 20 Å long binding gorge, the oxyanion hole, the choline binding site and the peripheral anionic site (PAS), located at the entrance of the binding gorge. In the present study, specific protein-ligand interactions were investigated by means of in silico docking studies to identify structural features of high-affinity inhibitors of cholinester-ases. Thereby the aim is to improve the affinitiy of newly developed cholinesterase- inhibitors. Furthermore, synthetic studies of a natural product served to establish a new lead compound for cholinesterase inhibitors. For high affinity tri- and tetracyclic amine substituted AChE-selective quinazoline and quinazolinone inhibitors, the aim was to determine the preferred ligand orientation in the binding site. To this end, the localization of the amine substituents in the CAS (inverted binding mode) or the binding of the quinazoline-/quinazolinone moiety there (classical binding mode) is conceivable. The aim was to explain structure-activity-relationships by the identified preferred and consistent binding mode. Docking studies showed a clear preference for the inverted binding mode in which the amine substituent is placed in the vicinity of the CAS. A structural characteristic of high affinity inhibitors is a protonated amine which can form a cation-π-interaction to the tryptophan indole ring system of the choline binding site. Furthermore, a π-π-interaction with the peripheral binding site (PAS) has been identified for the ligand backbone of tetra-cyclic inhibitors. The data set also included chiral quinazolinone- and quinazoline derivatives with hydrogenated C=N-double bond, which showed weaker affinity to AchE compared to non chiral compounds. The weaker affinity is probably due to the non-planar ligand back-bone. Due to steric reasons, especially for tetracyclic chiral compounds, stabilisation of the ligand backbone through π-π interactions is either not possible at all, or possible only for one enantiomeric form. Due to the nanomolar affinity of non chiral quinazoline and quinazolinone compounds, other directional interactions between protein and ligand were expected. Several inter- actions were identified in form of hydrogen bonds through the use of conserved water molecules in docking. These water molecules mediate hydrogen bonds from the ligand backbone to the protein. These interactions seem to be essential for the stabilization of high affinity quinazoline and quinazolinone inhibitors in the AChE binding site. Two photochromic bis-tacrine constitutional isomers (ring-open and ring-closed form) inhibit AChE and show a different effect with regard to the inhibition of amyloid-β fibril formation. Fibril formation is catalyzed by an unoccupied peripheral site (PAS) at the entrance of the AChE-binding pocket, which is why a different interaction of the ligands is expected with this binding site. Docking studies provided a similar binding mode for both constitutional isomers, which appears plausible for the ring-open and ring-closed form in the light of similar IC50-values of 4.3 and 1.8 nM. By selecting a suitable crystal structure, docking solutions were obtained in which one tacrine substituent is placed in the PAS and undergoes π-π-interactions with a tryptophan and a tyrosine. This placement of the PAS-binding tacrine-substituent is energetically favored which is expressed through better scores, compared to docking solutions where the tacrine-substituent is placed on the protein surface. The other tacrine substituent binds in the CAS in a manner which is known from other already crystalized tacrines. Molecular dynamic simulations were subsequently used for stability comparison of the protein-docking solution-complex of both isomers. Here, the better stabilization of the CAS-binding tacrine-substituent for the ring-open form was determined. The complex with the ring-open form shows the influx of six water molecules in a cavity of the PAS at the beginning of the simulation. As a consequence, the PAS-binding tacrine substituent is stabilized by hydrogen bonds to these water molecules during half of the simulation time. A hydrogen bond network of this magnitude was not observed for the ring-closed form of the inhibitor. The better inhibition of amyloid-β fibril formation by the ring-open form may be due to better stabilization of this ligand through hydrogen bonds in the AChE-binding site, which is not observed for the ring-closed form. Preferred interactions could also be identified for carbamate-based quinazoline inhibitors in the BChE-binding site. These carbamate compounds are pseudo-irreversible inhibitors and show a time-dependent inhibition with several interaction possibilities between protein and ligand. Docking studies in the BChE are challenging, as there currently exist only two X-ray structures of this enzyme with reversible ligands. Therefore, it is difficult to identify a suitable scoring function for the data set under investigation. Docking of the tetrahedral transition state delivered energetically degenerate docking solutions wherefore the aim was to investigate the reversible attachment complex in more detail. Thereby the challenge was the size of the BChE-binding pocket, which also supplied degenerate docking solutions in the reversible docking. Due to a similar carbamoylation rate of all the inhibitors tested, a conserved position of the carbamate moiety in the binding pocket was presumed. Therefore, a representative docking solution of a reference compound, which was selected in the binding pocket in terms of interactions, was chosen for a modeling approach. These interactions are 1) A hydrogen bond distance between the carbamate carbonyl and the oxyanion hole and 2) a distance between the carbamate carbon and the serine which allows for a nucleophilic attack and thus the transfer of the carbamate moiety onto the enzyme. For the modeling approach, the representative binding pose was used to construct the appropriate inhibitor structures. The preferred position of the N-methyl group was calculated for both enantiomers via the tension energy of the corresponding binding poses. For S-enantiomers the preferred posi-tion of the methyl group is quasi-"axial" and for R-enantiomers quasi-"equatorial". The conserved binding mode thus is characterized by the heptyl chain being placed in the acyl pocket and the ligand scaffold in a side pocket of the BChE-binding site where hydrophobic interactions dominate. In addition to high affinity quinazoline and quinazolinone inhibitors, it was intended to make quinazolinium compounds accessible as lead compounds for future cholinesterase inhibitors. Synthetic studies initially focused on chemical reactivity and stability of the natural product dehydroevodiamine (DHED) and its benz-derivative (benz-DHED). In particular, benz-DHED was unstable under the synthesis conditions applied so far and described in the literature. The investigations therefore required introduction of a suitable synthetic route, in this case oxidation with KMnO4, accompanied by improvement of yield and no by-product formation. For future syntheses of derivatives, the use of a Lewis-acid-labile protecting group is suggested. Depending on the reaction conditions, the quinazolinium compounds can be isolated in two forms (ring-opened and ring-closed = quinazolinium-salt). By means of UV/Vis-studies, the equilibrium of these two forms was elucidated. In aqueous alkaline solutions the enrichment of a third, hitherto in this context undescribed species, was observed. These studies helped in identification of the quinazolinium-form as biologically active species. Docking studies of this form, using the modeling-approach which was evolved for carbamates, showed a possible stabilization of this compound via a hydrogen bond mediated by a struc-tural water molecule in the BChE-binding site. The role of water here again shows that consideration of water molecules in docking studies might be able to describe preffered binding modes by means of additional protein-ligand-interactions better, compared to docking studies without explicit water molecule consideration. Based on the basic research carried out for quinazolinium compounds, future inhibitor development based on this substance class can be performed. Finally, the herein conducted synthetic and theoretical studies provide important contributions to the understanding of the interaction between inhibitors and cholinesterases, which can be used for future inhibitor development. KW - Cholinesteraseinhibitor KW - Docking KW - Organische Synthese KW - Acetylcholinesterase KW - Chinazolinone KW - Chinazoliniumverbindungen KW - Chinazoline KW - Carbamate KW - Bis-Tacrine Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-139955 ER - TY - THES A1 - Vogel, Patrick T1 - Traveling Wave Magnetic Particle Imaging T1 - Traveling Wave Magnetic Particle Imaging N2 - Magnetic Particle Imaging (MPI) ist eine noch sehr junge Technologie unter den nicht-invasiven tomographischen Verfahren. Seit der ersten Veröffentlichung 2005 wurden einige Scannertypen und Konzepte vorgestellt, welche durch die Messung des Antwortsignals von superparamagnetischen Eisennanopartikeln (SPIOs) auf wechselnde Magnetfelder ein dreidi-mensionales Bild ihrer Verteilung berechnen können. Durch die direkte Messung des Tracers handelt es sich beim MPI um eine sehr sensitive und hochspezifische bildgebende Methode. Zu Beginn dieser Forschungsarbeit gab es nur wenige bekannte MPI-Scanner, die jedoch alle ein nur kleines Field-of-View (FOV) vorweisen konnten. Der Grund dafür liegt in der Ver-wendung von Permanentmagneten. Das Ziel war es nun, ein neues Konzept auszuarbeiten und einen 3D-MPI-Scanner zu entwer-fen, der in der Lage ist, ein mausgroßes Objekt zu messen. In dieser Arbeit wird ein alternatives Scannerkonzept für die dreidimensionale Bildge-bung superparamagnetischer Eisennanopartikel vorgestellt. Der Traveling Wave MPI-Scanner (TWMPI) basiert auf einem neu entwickelten Hauptspulensystem, welches aus mehreren Elektromagneten besteht. Dadurch ist die Hardware bereits in der Lage, eine Linie entlang der Symmetrieachse über einen großen Bereich dynamisch zu kodieren. Mit Hilfe weiterer Ab-lenkspulen kann schließlich ein FOV von 65 x 25 x 25 Millimetern dreidimensional abgetastet werden. Dazu stehen mehrere Scanverfahren zur Verfügung, welche das Probenvolumen li-nienweise oder ebenenweise abtasten und mit einer Auflösung von ca. 2 Millimetern die Ver-teilung der SPIOs in wenigen Millisekunden abbilden können. Mit diesem neuen Hardwareansatz konnte erstmals ein MPI-Scanner mit einem MR-Tomographen (MRT) kombiniert werden. Das MPI/MRT-Hybridsystem liefert tomographi-sche Bilder des Gewebes (MRT) und zeigt die Verteilung des eisenhaltigen Kontrastmittels (MPI), ohne die Probe bewegen zu müssen. In einer in-vivo Echtzeitmessung konnte der TWMPI-Scanner mit 20 Bildern pro Se-kunde die dynamische Verteilung eines eisenhaltigen Kontrastmittels im Körper und speziell im schlagenden Herzen eines Tieres darstellen. Diese Echtzeitfähigkeit eröffnet in der kardi-ovaskuläre Bildgebung neue Möglichkeiten. Erste Messungen mit funktionalisierten Eisenpartikeln zeigen die spezifische Bildge-bung verschiedener Zelltypen und stellen einen interessanten Aspekt für die molekulare Bild-gebung dar. Die Sensitivität des Scanners liegt dabei im Bereich von wenigen Mikrogramm Eisen pro Milliliter, was für den Nachweis von wenigen 10.000 mit Eisen markierten Zellen ausreicht. Neben Messungen an diversen Ferrofluiden und eisenhaltigen Kontrastmitteln konnte der Einfluss von massiven Materialen, wie Eisenstückchen oder Eisenspänen, auf die rekon-struierten Bilder untersucht werden. Erste Messungen an Gestein zeigen die Verteilung von Eiseneinschlüssen und bieten die Möglichkeit einer weiteren zerstörungsfreien Untersuchungsmethode für Materialwissen-schaftler und Geologen. Weiterführende Testmessungen mit einer unabhängigen μMPI-Anlage zeigen erste Ergebnisse mit Auflösungen im Mikrometerbereich und liefern Erkennt-nisse für den Umgang und Messung mit starken Gradientenfeldern. Eine Modifizierung der Messanlage erlaubt es, in gerade einmal 500 μs ein komplettes Bild aufzunehmen, womit die Bewegung eines Ferrofluidtropfens in Wasser sichtbar gemacht werden konnte. Damit ist diese TWMPI-Anlage das schnellste MPI-System und eröffnet die Möglichkeit grundlegende Erfahrungen in der Partikeldynamik zu erlangen. Der vorgestellte Traveling Wave MPI-Scanner ist ein alternativer Scannertyp, welcher sich von anderen MPI-Scannern abhebt. Mit neuen Ansätzen ist in der Lage ein mausgroßes Objekt auf dynamische Weise sehr schnell abzutasten. Dabei konnten in verschiedenen Mes-sungen die Funktionalität und Leistungsfähigkeit des TWMPI-Konzeptes demonstriert wer-den, welche die gesteckten Ziele deutlich übertreffen. N2 - Magnetic particle imaging (MPI) is still a very young technology among the non-invasive tomographic modalities. Since its first publication in 2005, several types of scanners and concepts were presented, which can reconstruct a three-dimensional image of the distri-bution of superparamagnetic iron-oxide nanoparticles (SPIOs) by measuring their magnetiza-tion response to varying magnetic fields. Due to the direct measurement of the tracer MPI is a very sensitive and highly specific imaging modality. At the beginning of this project only a few MPI-scanners were known, but all of them are limited to a small field-of-view (FOV). The reason for this is the use of permanent mag-nets. The aim of this work was to develop a new concept and design for a 3D-MPI-scanner, which is able to measure a mouse sized object. In this thesis an alternative scanner concept for three-dimensional imaging of super-paramagnetic iron nanoparticles is presented. The Traveling Wave-MPI-scanner (TWMPI) is based on a newly developed main coil system, which consists of a series of electromagnets. This coil array is by itself able to dynamically encode a line along the symmetry axis over an extended length. With additional offset coils the system is able to scan a FOV of 65 x 25 x 25 millimeters in three dimensions. For scanning the whole volume several tech-niques are available, which map the data line-by-line or slice-by-slice in a few milliseconds and yield the distribution of SPIOs with a resolution of about 2 millimeters. Using this new hardware approach a MPI-scanner was successfully combined with an MRI-scanner for the first time. The MPI/MRI-hybrid-system provides tomographic images of the tissue (MRI) and detects the distribution of iron-containing contrast agent (MPI), without the need to move the sample. In an in-vivo real-time measurement using the TWMPI-scanner the dynamic distribu-tion of an iron-containing contrast agent was visualized in the body and especially in the beat-ing heart of an animal with a temporal resolution of 20 frames per second. This real-time ca-pability opens up new possibilities in cardio-vascular imaging. First measurements using functionalized iron-oxide nanoparticles specifically detect different cell types and thereby provide an interesting aspect for molecular imaging. The sensi-tivity of the scanner is in the range of a few micrograms of iron per milliliter, which is suffi-cient to detect about 50,000 iron-labeled cells. In several studies the influence of various ferrofluids, iron-containing contrast agents and solid materials, such as pieces of iron or iron filings, were examined on the reconstructed images. First measurements on ferrous rock show the location of iron-inclusions and offer an-other non-destructive imaging technique for material scientists and geologists. Additional tests with an independent μMPI-system were performed to explore resolutions in the micrometer range and provide insights for handling and measuring with a high gradient strength. A modification of the setup allows to acquire a full slice in just 500 microseconds, which enable the visualization of the motion of a droplet of ferrofluid in water. With this TWMPI is the fastest MPI-system available and gives access to fundamental studies of particle dynamics. The presented Traveling Wave MPI-system is an alternative scanner concept, which sets itself apart from other MPI-scanners. Mouse-sized objects can be imaged in a dynamic way in very short times. The feasibility and performance of the TWMPI-concept were suc-cessfully demonstrated in various measurements considerably exceeding the original aims. KW - Magnetpartikelbildgebung KW - Traveling Wave Magnetic Particle Imaging KW - Traveling Wave Magnetic Particle Imaging KW - tomographic imaging method KW - molecular imaging KW - field free point (FFP) KW - Tomografie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-132700 ER - TY - THES A1 - Vaegler, Sven T1 - Entwicklung eines neuen vorwissensbasierten Bildrekonstruktionsalgorithmus für die Cone-Beam-CT Bildgebung in der Strahlentherapie T1 - Development of a new prior knowledge based image reconstruction algorithm for the cone-beam-CT in radiation therapy N2 - In der heutigen Strahlentherapie kann durch eine am Linearbeschleuniger integrierte Röntgenröhre eine 3D-Bildgebung vor der Bestrahlung durchgeführt werden. Die sogenannte Kegel-Strahl-CT (Cone-Beam-CT, CBCT) erlaubt eine präzise Verifikation der Patientenlagerung sowie ein Ausgleich von Lagerungsungenauigkeiten. Dem Nutzen der verbesserten Patientenlagerung steht jedoch bei täglicher Anwendung eine erhöhte, nicht zu vernachlässigbare Strahlenexposition des Patienten gegenüber. Eine Verringerung des Dosisbeitrages bei der CBCT-Bildgebung lässt sich durch Reduzierung des Stroms zur Erzeugung der Röntgenstrahlung sowie durch Verringerung der Anzahl an Projektionen erreichen. Die so aufgenommen Projektionen lassen sich dann aber nur durch aufwendige Rekonstruktionsverfahren zu qualitativ hochwertigen Bilddatensätzen rekonstruieren. Ein Verfahren, dass für die Rekonstruktion vorab vorhandene Vorwissensbilder verwendet, ist der Prior-Image- Constrained-Compressed-Sensing-Rekonstruktionsalgorithmus (PICCS). Die Rekonstruktionsergebnisse des PICCS-Verfahrens übertreffen die Ergebnisse des auf den konventionellen Feldkamp-Davis-Kress-Algorithmus (FDK) basierenden Verfahrens, wenn nur eine geringe Anzahl an Projektionen zur Verfügung steht. Allerdings können bei dem PICCS-Verfahren derzeit keine großen Variationen in den Vorwissensbildern berücksichtigt werden und führen zu einer geringeren Bildqualität. Diese Variationen treten insbesondere durch anatomische Veränderungen wie Tumorverkleinerung oder Gewichtsveränderungen auf. Das Ziel der vorliegenden Arbeit bestand folglich darin, einen neuen vorwissensbasierten Rekonstruktionsalgorithmus zu entwickeln, der auf Basis des PICCS-Verfahrens zusätzlich die Verwendung von lokalen Verlässlichkeitsinformationen über das Vorwissensbild ermöglicht, um damit die Variationen in den Vorwissensbildern bei der Rekonstruktion entsprechend berücksichtigen zu können. Die grundlegende Idee des neu entwickelten Rekonstruktionsverfahrens ist die Annahme, dass die Vorwissensbilder aus Bereichen mit kleinen und großen Variationen bestehen. Darauf aufbauend wird eine Gewichtungsmatrix erzeugt, die die Stärke der Variationen des Vorwissens im Rekonstruktionsalgorithmus berücksichtigt. In Machbarkeitsstudien wurde das neue Verfahren hinsichtlich der Verbesserung der Bildqualität unter Berücksichtigung gängiger Dosisreduzierungsstrategien untersucht. Dazu zählten die Reduktion der Anzahl der Projektionen, die Akquisition von Projektionen mit kleinerer Fluenz sowie die Verkleinerung des Akquisitionsbereiches. Die Studien erfolgten an einem Computerphantom sowie insbesondere an experimentellen Daten, die mit dem klinischen CBCT aufgenommen worden sind. Zum Vergleich erfolgte die Rekonstruktion mit dem Standardverfahren basierend auf der gefilterten Rückprojektion, dem Compressed Sensing- sowie dem konventionellen PICCS-Verfahren. Das neue Verfahren konnte in den untersuchten Fällen Bilddatensätze mit verbesserter bis ausgezeichneter Qualität rekonstruieren, sogar dann, wenn nur eine sehr geringe Anzahl an Projektionen oder nur Projektionen mit starkem Rauschen zur Verfügung standen. Demgegenüber wiesen die Rekonstruktionsergebnisse der anderen Algorithmen starke Artefakte auf. Damit eröffnet das neu entwickelte Verfahren die Möglichkeit durch die Integration von Zuverlässigkeitsinformationen über die vorhandenen Vorwissensbildern in den Rekonstruktionsalgorithmus, den Dosisbeitrag bei der täglichen CBCT-Bildgebung zu minimieren und eine ausgezeichnete Bildqualität erzielen zu können. N2 - The treatment of cancer in radiation therapy is achievable today by techniques that enable highly conformal dose distributions and steep dose gradients. In order to avoid mistreatment, these irradiation techniques have necessitated enhanced patient localization techniques. With an integrated x-ray tube at modern linear accelerators kV-projections can be acquired over a sufficiently large angular space and can be reconstructed to a volumetric image data set from the current situation of the patient prior to irradiation. The so-called Cone-Beam-CT (CBCT) allows a precise verification of patient positioning as well as adaptive radiotherapy. The benefits of an improved patient positioning due to a daily performed CBCT's is contrary to an increased and not negligible radiation exposure of the patient. In order to decrease the radiation exposure, substantial research effort is focused on various dose reduction strategies. Prominent strategies are the decrease of the charge per projection, the reduction of the number of projections as well as the reduction of the acquisition space. Unfortunately, these acquisition schemes lead to images with degraded quality with the widely used Feldkamp-Davis-Kress image reconstruction algorithm. More sophisticated image reconstruction techniques can deal with these dose-reduction strategies without degrading the image quality. A frequently investigated method is the image reconstruction by minimizing the total variation (TV), which is also known as Compressed Sensing (CS). A Compressed Sensing-based reconstruction framework that includes prior images into the reconstruction algorithm is the Prior-Image-Constrained- Compressed-Sensing algorithm (PICCS). The images reconstructed by PICCS outperform the reconstruction results of the conventional Feldkamp-Davis-Kress algorithm (FDK) based method if only a small number of projections are available. However, a drawback of PICCS is that major deviations between prior image data sets and the follow up reconstructed images are not appropriate considered so far. These deviations may result from changes in anatomy including tumour shrinkage and loss of weight and may result in a degraded image quality of the reconstructed images. Deformable registration methods that adapt the prior images adequately can compensate this shortcoming of PICCS. Such registration techniques, however, suffer from limited accurateness and much higher computation time for the overall reconstruction process. Therefore, the aim of this thesis was to develop a new knowledge-based reconstruction algorithm that incorporates additionally local dependent reliability information about the prior images into reconstruction algorithm. The basic idea of the new algorithm is the assumption that the prior images are composed of areas with large and of areas with small deviations. Accordingly, the areas of the prior image were assigned as variable where substantial deformations due to motion or change in structure over the time series were expected. Hence, these regions were not providing valuable structural information for the anticipated result anymore. In contrast, “a priori” information was assigned to structurally stationary areas where no changes were expected. Based on this composition, a weighting matrix was generated that considers the strength of these variations during reconstruction. The new algorithm was tested in different feasibility studies to common dose reduction strategies. These dose reduction strategies includes the reduction of the number of projections, the acquisition of projections with strong noise and the reduction of the acquisition space. The main aim of this work was to demonstrate the gain of image quality when prior images with major variations are used compared to standard reconstruction techniques. The studies were performed with a computer phantom, and in particular with experimental data that have been acquired with the clinical CBCT. The new reconstruction framework yields images with substantially improved quality even when only a very small number of projections or projections with high noise were available. These images contained less streaking, blurring and inaccurately reconstructed structures compared to the images reconstructed by FDK, CS and conventional PICCS. In conclusion, the new developed reconstruction framework indicate the potential to lowering the radiation dose to the patient due to daily CBCT imaging while maintaining good image quality. KW - Strahlentherapie KW - Computertomografie KW - Bildrekonstruktion KW - Compressed Sensing KW - Cone Beam CT KW - Prior Knowledge KW - PICCS KW - Komprimierte Abtastung KW - Vorwissen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137445 ER - TY - THES A1 - Unsleber, Sebastian Philipp T1 - Festkörperbasierte Einzelphotonenquellen als Grundbausteine der Quanteninformationstechnologie T1 - Solid-state single photon sources as building blocks for the quantum information technology N2 - Die vorliegende Arbeit hatte das Ziel basierend auf Halbleiternanostrukturen eine effiziente und skalierbare Quelle einzelner und ununterscheidbarer Photonen zu entwickeln. Dies ist eine Basiskomponente von zukünftigen quantenphysikalischen Anwendungen wie der Quantenkommunikation oder dem Quantencomputer. Diese Konzepte nutzen gezielt quantenmechanische Systeme um einerseits Kommunikation absolut abhörsicher zu machen oder um neuartige Computer zu konstruieren, die bestimmte Aufgaben - wie die Produktzerlegung großer Zahlen - effizienter lösen als heutige Systeme. Ein mögliche Realisierung der Quantenkommunikation ist beispielsweise die Schlüsselverteilung zwischen zwei Parteien durch Verwendung des BB84-Protokolls. Dazu wird eine Lichtquelle benötigt, welche die physikalisch kleinstmögliche Lichtmenge - ein einzelnes Photon - aussendet. Der Kommunikationskanal wird dann über verschiedene Polarisationszustände dieser Photonen gegen ein Abhören nach außen hin abgesichert. Da die maximale Kommunikationsdistanz aufgrund von Verlusten im Quantenkanal beschränkt ist, muss das Signal für größere Distanzen mit Hilfe eines sog. Quantenrepeaters aufbereitet werden. Ein solcher kann ebenfalls unter Verwendung von Einzelphotonenquellen realisiert werden. Das Konzept des Quantenverstärkers stellt aber die zusätzliche Anforderung an die Einzelphotonenquelle, dass die ausgesendeten Lichtteilchen in der Summe ihrer Eigenschaften wie Energie und Polarisation immer gleich und somit ununterscheidbar sein müssen. Auf Basis solcher ununterscheidbarer Photonen gibt es zudem mit dem linear optischen Quantenrechner auch mögliche theoretische Ansätze zur Realisierung eines Quantencomputers. Dabei kann über die Quanteninterferenz von ununterscheidbaren Photonen an optischen Bauteilen wie Strahlteilern ein Quanten-NOT-Gatter zur Berechnung spezieller Algorithmen realisiert werden. Als vielversprechende Kandidaten für eine solche Lichtquelle einzelner Photonen haben sich in den letzten Jahren Halbleiter-Quantenpunkte herauskristallisiert. Dank des festkörperbasierten Ansatzes können diese Strukturen in komplexe photonische Umgebungen zur Erhöhung der Photonen-Extraktionseffizienz und -Emissionsrate eingebettet werden. Ziel dieser Arbeit war somit eine effiziente Quelle einzelner ununterscheidbarer Photonen zu realisieren. Im Hinblick auf die spätere Anwendbarkeit wurde der Fokus zudem auf die skalierbare bzw. deterministische Fabrikation der Quantenpunkt-Strukturen gelegt und zwei technologische Ansätze - die kryogene in-situ-Lithographie und das positionierte Wachstum von Quantenpunkten - untersucht. Im ersten experimentellen Kapitel dieser Arbeit wird ein neuartiges Materialsystem vorgestellt, welches sich zur Generation einzelner Photonen eignet. Es können spektral scharfe Emissionslinien mit Linienbreiten bis knapp über 50 µeV aus Al$_{0,48}$In$_{0,52}$As Volumenmaterial beobachtet werden, wenn diese Schicht auf InP(111) Substraten abgeschieden wird. In Querschnitt-Rastertunnelmikroskopie-Messungen wurden ca. 16 nm große Cluster, welche eine um ungefähr 7 % höhere Indiumkonzentration im Vergleich zur nominellen Zusammensetzung des Volumenmaterials besitzen, gefunden. Über die Simulation dieser Strukturen konnten diese als Quelle der spektral scharfen Emissionslinien identifiziert werden. Zudem wurde mittels Auto- und Kreuzkorrelationsmessungen nachgewiesen, dass diese Nanocluster einzelne Photonen emittieren und verschieden geladene exzitonische und biexzitonische Ladungsträgerkomplexe binden können. Anschließend wurde der Fokus auf InGaAs-Quantenpunkte gelegt und zunächst im Rahmen einer experimentellen und theoretischen Gemeinschaftsarbeit die Kohärenzeigenschaften eines gekoppelten Quantenpunkt-Mikrokavität-Systems untersucht. Über temperaturabhängige Zwei-Photonen Interferenz Messungen und dem Vergleich mit einem mikroskopischen Modell des Systems konnten gezielt die Bestandteile der Quantenpunkt-Dephasierung extrahiert werden. Auf diesen Ergebnissen aufbauend wurde die gepulste, strikt resonante Anregung von Quantenpunkten als experimentelle Schlüsseltechnik etabliert. Damit konnten bei tiefen Temperaturen nahezu vollständig ununterscheidbare Photonen durch eine Zwei-Photonen Interferenz Visibilität von über 98 % nachgewiesen werden. Für ein skalierbares und deterministisches Quantenpunkt-Bauelement ist entweder die Kontrolle über die Position an welcher der Quantenpunkt gewachsen wird nötig, oder die Position an der eine Mikrokavität geätzt wird muss auf die Position eines selbstorganisiert gewachsenen Quantenpunktes abgestimmt werden. Im weiteren Verlauf werden Untersuchungen an beiden technologischen Ansätzen durchgeführt. Zunächst wurde der Fokus auf positionierte Quantenpunkte gelegt. Mittels in das Substrat geätzter Nanolöcher wird der Ort der Quantenpunkt-Nukleation festgelegt. Durch die geätzten Grenzflächen in Quantenpunkt-Nähe entstehen jedoch auch Defektzustände, die negativen Einfluss auf die Kohärenz der Quantenpunkt-Emission nehmen. Deshalb wurde an diesem Typus von Quantenpunkten die strikt resonante Anregung etabliert und zum ersten Mal die kohärente Kopplung des Exzitons an ein resonantes Lichtfeld demonstriert. Zudem konnte die deterministische Kontrolle der Exzitonbesetzung über den Nachweis einer Rabi-Oszillation gezeigt werden. Abschließend wird das Konzept der kryogenen in-situ-Lithographie vorgestellt. Diese erlaubt die laterale Ausrichtung der Mikrokavität an die Position eines selbstorganisiert gewachsenen Quantenpunktes. Damit konnte gezielt die Emission eines zuvor ausgewählten, spektral schmalen Quantenpunktes mit nahezu 75 % Gesamteffizienz eingesammelt werden. Die Ununterscheidbarkeit der Quantenpunkt-Photonen war dabei mit einer Zwei-Photonen Interferenz Visibilität von bis zu $\nu=(88\pm3)~\%$ sehr hoch. Damit wurde im Rahmen dieser Arbeit eine Einzelphotonenquelle realisiert, aus der sich sehr effizient kohärente Photonen auskoppeln lassen, was einen wichtigen Schritt hin zur deterministischen Fabrikation von Lichtquellen für quantenphysikalischen Anwendungen darstellt. N2 - The aim of this thesis was to develop an efficient and scalable source of single and indistinguishable photons. This is a fundamental element of future quantum physical applications like quantum communication or quantum networks. These concepts use quantum mechanical systems to either establish absolute secure communication or to construct new computers, whose calculating capacity for specialized algorithms - like integer factorization - is far beyond today's systems. One possible realization of quantum communication is the key distribution between two parties via using the BB84-protocol. This scheme needs a lights source that emits the physical smallest amount of light - a single photon. The communication channel between transmitter and receiver is then secured against eavesdropping by different polarisation states of these photons. The non-avoidable loses in the quantum channel limit the maximum possible communication distance, which is why the signal has to be amplified with a so called quantum repeater after a certain distance. Such a repeater can also be realized with a single photon source. In addition to the BB84-protocol, for realizing the concept of a quantum repeater the photons have to share all their properties like energy and polarization, i. e. they need to be indistinguishable. Over the past years, semiconductor quantum dots have been identified as a promising candidate for such a light source. Due to the solid state scheme, these structures can be implemented into complex photonic architectures to increase the outcoupling efficiency and the emission rate of single photons. The main goal of the following work was therefore the realization of an efficient source of single and indistinguishable photons. Keeping future applications in mind, the additional focus of this work was lying on the scalable and deterministic fabrication of these quantum dot structures and two technological approaches - the cryogenic in-situ-lithography and the positioned growth of quantum dots - were investigated. In the first part of this thesis, a novel material system, which serves as a source of single photons is presented. Spectrally sharp emission features with a linewidth down to 50 µeV from bulk Al$_{0,48}$In$_{0,52}$As grown on InP(111) substrates were observed. Via cross-section scanning tunneling microscopy measurements, nanoclusters with a diameter of approximately 16 nm and a 7 % increased indium concentration compared to the nominal composition, were found. Additional simulations of these complexes identify these nanoclusters as sources of the spectrally sharp emissions lines. Furthermore, single photon emission as well as the formation of multi excitonic charge complexes within these clusters via auto- and crosscorrelation measurements is confirmed. Afterwards, the work focusses on InGaAs-quantum dots and, as a first step, the coherence properties of a coupled quantum dot microcavity system are investigated within a joint theoretical and experimental work. Via temperature dependent two-photon interference measurements the single dephasing mechanisms of this system are extracted via modelling the results with a microscopic theory. Based on this results, the strict resonant excitation of quantum dots was established as a experimental key technique and quantum dot photons with a two-photon interference visibility above 98 % were generated at low temperatures. For scalable and deterministic quantum dot devices, one either needs to control the growth spot of a quantum dot or the position of an etched microcavity has to be aligned to the position of a self-organized quantum dot. In the subsequent parts if this work, studies on both technological approaches are presented. First, spectroscopic experiments on site controlled quantum dots were carried out. Via etched nanoholes, the nucleation spot of the quantum dot is defined. These etched surfaces may lead to defect states, which decrease the coherence of the quantum dot emission. In order to avoid these detrimental influence, the strict resonant excitation of such site controlled quantum dots is established and the coherent coupling of the site controlled quantum dot exciton to the resonant laser field is observed. In addition, deterministic control of the site controlled quantum dot population is achieved, which is verified via the observation of the first Rabi-oscillation. Finally, the so-called in-situ-lithography is presented, which allows for the lateral alignment of a self-organized quantum dot and the fundamental mode of a micropillar. Using this technique, an overall collection efficiency of single photons from a pre-selected quantum dot with a small linewidth of almost 75 % is shown. The coherence of this quantum dot was notably, which is demonstrated by a two-photon interference visibility as high as $\nu=(88\pm3)~\%$. In summary, an efficient source of single and indistinguishable photons was realized in this thesis, which is an important step towards the fabrication of deterministic quantum dot devices for quantum mechanical applications. KW - Quantenpunkt KW - Einzelphotonenemission KW - Quantenkommunikation KW - Einzelphotonenquelle KW - Mikrosäulenresonator KW - Nichtunterscheidbarkeit KW - Verteilte Bragg-Reflexion KW - Optischer Resonator Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147322 ER - TY - THES A1 - Ullrich, Stefan T1 - Synthese und Reaktivität NHC-stabilisierter Diborene T1 - Synthesis and reactivity of NHC-stabilized diborenes N2 - In der vorliegenden Arbeit wurde der Fokus auf die Synthese neuer Diborene mit unterschiedlichem Substitutionsmuster gerichtet. Ein Ziel bestand darin, die Gruppe der heteroaromatisch substituierten Diborene, die sich bisher aus den literaturbekannten Thienyl-substituierten Diborenen 59 und 60 zusammensetzt, um weitere Vertreter zu bereichern. In diesem Kontext konnte das Furanyl-substituierte Diboren 85 synthetisiert und charakterisiert werden (Schema 59). Die Festkörperstruktur von 85 zeigt eine koplanare Anordnung zwischen der B=B-Doppelbindung und den Furanylsubstituenten, was als Hinweis auf eine Konjugation zwischen der B=B-Doppelbindung und den Heteroaromaten gewertet werden kann und damit Parallelen zu den Thienyl-substituierten Diborenen 59 und 60 erkennen lässt. Analog dazu weist 85 drei Banden im UV-Vis-Absorptionsspektrum auf, die anhand von quantenchemischen Rechnungen den entsprechenden elektronischen Anregungen zugeordnet werden können. Demzufolge sind die HOMOs ausschließlich an der B=B-Doppelbindung und die LUMOs an den Furanylringen, sowie den NHCs lokalisiert. Cyclovoltammetrische Messungen legen zudem den Elektronenreichtum des Furanyl-substituierten Diborens 85 offen und sprechen für dessen Eignung als starkes, neutrales nichtmetallisches Oxidationsmittel. Darüber hinaus zeigen sie eine teilweise reversible Oxidation zu dem entsprechenden Monoradikalkation auf. Zur Realisierung weiterer heteroaromatisch substituierter Diborene wurden Versuche unternommen die Pyrrolylgruppe als Substituent zu etablieren, die noch elektronenreicher verglichen zu Furanyl- und Thienylgruppen ist. Die erfolgreiche Darstellung des NHC-stabilisierten Diborens 88 konnte mittels NMR-Spektroskopie verifiziert werden, jedoch gelang die weitere Charakterisierung aufgrund der extremen Empfindlichkeit von 88 nicht (Schema 59). Der Einsatz von vergleichsweise großen NHCs wie IMes zur kinetischen Stabilisierung der B=B-Doppelbindung eines Pyrrolyl-substituierten Diborens war nicht erfolgreich. Schema 59: Synthese der NHC-stabilisierten heteroaromatisch substituierten Diborene (85, 88) durch Reduktion der korrespondierenden NHC-Boran-Addukte (84, 87). In unmittelbarer Fortführung der aussichtsreichen Arbeiten von Dr. Philipp Bissinger wurde an geeigneten Syntheserouten zu den NHC-stabilisierten Diborenen 95 und 99 mit derivatisierten Thiophensubstituenten gearbeitet. Ausgehend von den BMes2- und B(FMes)2-funktionalisierten Thiophensubstituenten konnten über mehrere Reaktionssequenzen die korrespondierenden NHC-Boran-Addukte synthetisiert und charakterisiert werden. Die Reduktion dieser NHC-Boran-Addukte erzeugt intensiv gefärbte Lösungen, deren 11B-NMR-spektroskopische Untersuchungen Hinweise auf die Generierung der Diborene 95 und 99 lieferten (Schema 60). Darüber hinaus wird die erfolgreiche Darstellung des Diborens 95 durch Röntgenstrukturanalyse an Einkristallen gestützt. Schema 60: Synthese der Diborene 95 und 99 mit derivatisierten Thiophensubstituenten. Die Isolierung größerer Mengen der Diborene 95 und 99 in analytisch reiner Form gelang jedoch bislang nicht. UV-Vis Absorptionsspektroskopie, Cyclovoltammetrie und TD-DFT-Rechnungen offenbaren die drastische Einflussnahme der BMes2- bzw. der B(FMes)2-Gruppe auf die Eigenschaften der resultierenden Diborene 95 und 99. Vor allem die elektronenziehende B(FMes)2-Gruppe senkt die Grenzorbitale energetisch erheblich ab und verringert das HOMO-LUMO-gap signifikant. Die Hauptabsorptionsbande im UV-Vis-Absorptionsspektrum findet sich im nahinfraroten Bereich (NIR) und ist damit gegenüber jener des Thienyl-substituierten Diborens 59 stark bathochrom verschoben. Ziel anknüpfender Arbeiten der Gruppe um Braunschweig ist die Optimierung der Synthese der Diborene 95 und 99, sowie die weitere Charakterisierung der physikalischen Eigenschaften und die Erforschung der Reaktivitäten. Ein weiteres Ziel dieser Arbeit war die Synthese von Vinyl-substituierten Diborenen. Das NHC-Boran-Addukt 102 konnte, ausgehend von 1,1-Diphenylethen, erfolgreich dargestellt werden. Die Reduktion mit KC8 erzeugte eine intensiv gefärbte Reaktionslösung, deren 11B-NMR-spektroskopische Untersuchung eine gegenüber bekannten Diborenen leicht tieffeldverschobene Resonanz im 11B-NMR-Spektrum zeigt. Die Isolierung und zweifelsfreie Identifizierung des Reaktionsprodukts gelang aufgrund der hohen Empfindlichkeit bislang nicht. Weitere Versuche ein Diboren mit vinylogem Substitutionsmuster zu synthetisieren, in dem die alpha-Position des Vinyl-Substituenten durch eine Phenylgruppe besetzt ist, waren nicht zielführend (Schema 61). Anknüpfend an die Arbeiten von Thomas Steffenhagen, dem die Darstellung des ersten [2]Diboraferrocenophans mit Diborenbrücke 109 und dessen Identifizierung mittels NMR-Spektroskopie gelang, wurden Versuche unternommen, 109 zu kristallisieren. Dabei konnten geeignete Einkristalle zur röntgenstrukturanalytischen Charakterisierung erhalten werden und das Strukturmotiv im Festkörper bestätigt werden (Schema 62). Zentraler Gegenstand dieser Arbeit war neben der Synthese und Charakterisierung von neuen Diborenen die Untersuchung der Chemie der reaktiven B=B-Doppelbindung. Dazu wurden unter anderem Reaktivitätsstudien mit Münzmetallkomplexen durchgeführt, um die Koordinationschemie der heteroaromatisch substituierten Diborene 59 und 85, sowie des Diboren-verbrückten [2]Diboraferrocenophans 109 zu erforschen. Die Umsetzungen von 59, 85 und 109 mit CuCl führten zu den entsprechenden Münzmetall π-Diboren-Komplexen 111-113 (Schema 63). Röntgenstrukturanalytische Untersuchungen zeigen die T-förmige Geometrie der Komplexe, die aus der side-on Koordination des jeweiligen Diborens an das Metallzentrum resultiert. Das erhaltene Strukturmotiv entspricht damit dem der literaturbekannten Münzmetall-π-Diboren-Komplexe 71 und 72. Aufgrund der hohen Empfindlichkeit konnten allerdings weder die Ausbeute bestimmt noch eine detaillierte NMR-spektroskopische Charakterisierung durchgeführt werden. Das photophysikalische Potential dieser Verbindungsklasse wird dennoch in qualitativen Tests durch Bestrahlung mit UV-Licht erkennbar. Die Koordination von Kupferalkinen an die B=B-Doppelbindung der Verbindungen 59, 85 und 109 verläuft demgegenüber selektiv (Schema 63). Die ebenfalls T-förmigen Komplexe (114-116) erweisen sich als deutlich stabiler als die CuCl-Analoga und konnten demzufolge in analysenreiner Form isoliert werden. Allerdings zeigen diese in qualitativen Tests kein Lumineszenzverhalten. Eine genauere Analyse dieser Befunde erfolgte bislang nicht, ist aber aktueller Bestandteil der Forschung der Arbeitsgruppe um Braunschweig. Da die heteroaromatisch substituierten Diborene wegen ihres energetisch hoch liegenden HOMO bereitwillig zur Abgabe von Elektronen tendieren, wie in cyclovoltammetrischen Messungen gezeigt werden konnte, wurde deren potentielle Verwendung als Reduktionsmittel untersucht. Die Diborene 59, 60, 85 und 88 wurden dazu mit dem milden Oxidationsmittel (C7H7)BArf4 oxidiert und die Monoradikalkationen 117-120 mittels EPR-Spektroskopie nachgewiesen (Schema 64). Aufgrund der hohen Empfindlichkeit der Radikale (117-120) konnte keine weitere Charakterisierung erfolgen. Durch Oxidation des Diborens 85 mit Iod konnte Verbindung 121 erhalten werden (Schema 65). Die Festkörperstruktur zeigt einen dreigliedrigen Heterocyclus, bestehend aus einem positiv polarisierten Iodatom, das eine B2-Einheit verbrückt und damit die gleichwertige Beschreibung als Iodoniumion in Analogie zu den gleichnamigen Intermediaten, die bei der Addition von Halogenen an Alkene entstehen, rechtfertigt. Die Hydroborierungsreaktion ist eine bekannte Additionsreaktion von H-B-Bindungen an C=C-Doppelbindungen und konnte in dieser Arbeit erfolgreich auf die alkenanalogen Diborene übertragen werden. Die Reaktion des heteroaromatisch substituierten Diborens 85 mit Catecholboran ergibt das Triboran 122, das strukturell den klassischen Hydroborierungsprodukten von Alkenen gleicht. In Analogie dazu wird von einer syn-Addition der H-B-Bindung an die B=B-Doppelbindung des Diborens ausgegangen. Wird hingegen das Hydroborierungsreagenz Durylboran eingesetzt, so findet eine nicht-klassische Addition der H-B-Fragmente an die B=B-Doppelbindung statt. Der genaue Mechanismus, der zur Bildung des Triborans 124 führt, ist bisher nicht aufgeklärt (Schema 66). Wird das [2]Diboraferrocenophan 109, das ein cyclisches, cis-konfiguriertes Diboren als Brücke beinhaltet, mit Catecholboran bzw. Durylboran umgesetzt, so werden ebenfalls Triborane (123 und 125) generiert, die sich jedoch von den Triboranen 122 und 124 in ihrer Struktur grundlegend unterscheiden (Schema 67). Ein Erklärungsansatz hierfür könnte in der hohen Ringspannung im cyclischen Diboren-verbrückten [2]Diboraferrocenophan 109 verglichen mit dem acyclischen heteroaromatisch substituierten Diboren 85 liegen. Ein Schritt zur Bildung des Triborans 123 aus der Umsetzung von 109 mit Catecholboran findet offenbar, wie die Festkörperstruktur von 123 nahe legt, durch eine Ringerweiterung des Fünfringes des Catecholborans zu einem Sechsring durch Insertion eines Boratoms der Diborenbrücke statt. Um genauere Aussagen zur Bildung von 123 wie auch 125 treffen zu können, sind quantenchemische Studien zu diesem Thema aktuelles Arbeitsgebiet der Arbeitsgruppe um Braunschweig. Die Reaktivität der elektronenreichen B=B-Doppelbindung der heteroaromatisch substituierten Diborene wurde in der vorliegenden Arbeit gegenüber der Substanzklasse der Chalkogene überprüft. Dabei stellte sich heraus, dass die Reaktionen der Diborene 60 und 85 mit elementarem Schwefel durch reduktive Insertion von Schwefel in die B=B-Doppelbindung zur Bildung von Produktgemischen aus Trithiadiborolanen und Diborathiiranen führen. Es zeigte sich, dass die gezielte Darstellung der Trithiadiborolane 126 und 127 durch Einwirkung von Ultraschall gelingt, wohingegen das Thiadiborolan 128 selektiv durch Reaktion des Diborens 85 mit Ethylensulfid oder einem Überschuss an Triphenylphosphansulfid zugänglich gemacht werden kann (Schema 68). Die Reaktion der Diborene 60 und 85 mit elementarem Selen bzw. elementarem Tellur ergibt die entsprechenden Diboraselenirane (129 und 130) bzw. Diboratellurirane (131 und 132), die durch reduktive Insertion des entsprechenden Chalkogens in die B=B-Doppelbindung entstehen (Schema 69). Eine vollständige Spaltung der B=B-Bindung durch Insertion weiterer Äquivalente Selen bzw. Tellur ist auch unter Behandlung mit Ultraschall nicht zu beobachten. Das Furanyl-substituierte Diboren 85 konnte zudem mit chalkogenhaltigen Verbindungen erfolgreich umgesetzt werden. 85 reagiert mit Diphenyldisulfid und Diphenyldiselenid selektiv durch Addition der E-E-Bindung an die B=B Doppelbindung (Schema 70). Die diaseteroselektiven, analysenreinen 1,2-Additionsprodukte (133, 137) lassen auf einen Mechanismus, der in Analogie zu den Additionen von Disulfiden bzw. Diseleniden an Alkene über die Zwischenstufe entsprechender Sulfonium- bzw. Seleniumionen verläuft, folgern. Alternativ dazu muss eine konzertierte syn-Addition der E-E-Bindung in Erwägung gezogen werden. Demgegenüber konnten aus den Umsetzungen des Thienyl-substituierten Diborens 60 mit Diphenyldisulfid, Diphenyldiselenid und isoPropylthiol keine analysenreinen Produkte isoliert werden. Das Diboren-verbrückte [2]Diboraferrocenophan 109 reagiert mit Diphenyldisulfid in einer 1,2-Addition der S-S-Bindung an die B=B-Doppelbindung, wobei ein sp2-sp3-Diboran durch Abspaltung eines NHCs gebildet wird. Die verkürzte Fe-Bsp2-Bindungslänge lässt auf eine Stabilisierung des sp2-Boratoms durch das Fe-Zentrum schließen. In einer vergleichbaren Reaktion mit Dimethyldisulfid konnte das identische Strukturmotiv, ein sp2-sp3-Diboran, erhalten werden (Schema 71). Die Reaktion des [2]Diboraferrocenophans 109 mit Diphenyldiselenid führt zur vollständigen Spaltung der B=B-Doppelbindung unter Addition zweier Se-Se-Bindungen von zwei Äquivalenten Diphenyldiselenid und der damit einhergehenden Bildung der acyclischen bisborylierten Ferrocenspezies 139 (Schema 72). Die Bildung des einfachen Additionsprodukts, was wahrscheinlich intermediär auftritt, wurde auch bei Umsetzung mit nur einem Äquivalent Diphenyldiselenid nicht beobachtet. Die Umsetzung des Furanyl-substituierten Diborens 85 mit isoPropylthiol verläuft unter Addition der H-S-Bindung an die B=B-Doppelbindung, wobei in allen Fällen das syn-Additionsprodukt 142 erhalten wurde (Schema 72). Die von Thomas Steffenhagen beschriebene Addition der H-S-Bindung von isoPropylthiol an die B=B-Doppelbindung des [2]Diboraferrocenophans 109 ergibt dagegen selektiv ein anti-Additionsprodukt. In einer vergleichbaren Reaktion des [2]Diboraferrocenophans 109 mit tert-Butylthiol wurden anhand von NMR-Spektroskopie Indizien für die Bildung eines 1,2-Additionsproduktes erhalten. Allerdings gelang die Isolierung eines analysenreinen Produktes bislang nicht. N2 - Initially the focus of this work was the synthesis and characterization of novel diborenes bearing a variety of boron substituents. Of particular interest was the introduction of new heterocyclic functionalized diborenes synthesized in a manner akin to two literature-known thienyl functionalized diborenes (59 and 60). Through these studies, the synthesis and charaterization of the furanyl-functionalized diborene 85 has been achieved (scheme 1). The solid-state structure of 85 displays coplanarity between the respective B2 unit and the furanyl rings, indicating some degree of pi-conjugation between the heterocyclic substituents and the central B2 unit. This structural feature closely parallels the thienyl-functionalized diborenes, which also exhibit coplanarity between the central B2 unit and the peripheral heterocycles as well. Similar to 59 and 60, the furanyl-functionalized diborene 85 reveals three absorption bands in the UV-vis spectrum. According to TD-DFT calculations the excitations can be assigned to transitions between the frontier orbitals. The HOMOs are exclusively located at the central B=B double bond, whereas the LUMOs are predominantly delocalized over the furanyl substituents and the NHCs. Cyclovoltammetry measurements prove that the diborene 85 is extraordinarily electron rich, which is in accordance with previous data taken from the characterization of the thienyl-substituted diborenes (59, 60). Therefore the heterocyclic-functionalized diborenes can be considered strong electron donors. Respectively, these species rank among the class of strong, neutral non-metallic reducing agents. Moreover the partial reversible reduction wave suggests the formation of a stable monoradical cation, which was also observed in similar cyclovoltametry measurements of the related diborenes 59 and 60. A synthetic approach to establish a pyrrolyl-functionalized diborene was also investigated. The successful synthesis of the IMe-stabilized diborene 88 was verified by NMR spectroscopy (scheme 1). Further charaterization of 88 failed because of the instability of the compound in both the solid state and in solution. The application of a more sterically demanding NHC (IMes) led only to the respective NHC-borane adduct 89, which could not be reductively coupled to the desired diborene. In a continuation of the promising work of Dr. Philipp Bissinger, the search for a reliable synthesis route to the heterocyclic-substituted diborenes 95 and 99 was examined (scheme 2). These species consisted of thiophene-derived heterocyclics substituted with BMes2 and B(FMes)2 groups, respectively. Starting from the BMes2- and B(FMes)2-functionalized thiophene precursors, the synthesis of the respective NHC-borane adducts was first accomplished over several reaction steps. The reduction of these adducts produced intensely colored solutions of the respective diborenes 95 and 99 as confirmed by 11B NMR spectroscopic investigations. The diborene 95 was structurally confirmed by X-ray diffraction studies of suitable crystals, however, isolation of the pure compounds (95, 99) in larger amounts for detailed NMR spectroscopic studies could not be achieved. Investigations via UV-vis spectroscopy, cyclovoltammetry and TD-DFT-calculations revealed the significant influence of the BMes2 and the B(FMes)2 groups on the chemical and photophysical properties of both diborenes 95 and 99. The strong electron withdrawing B(FMes)2 group was found to lower the energy of the LUMO, subsequently decreasing the HOMO-LUMO energetic gap dramatically. The main absorption band in the UV-vis spectrum of 99 is detected in the near infrared (NIR) range, bathochromically shifted in comparison to the parent thienyl-substituted diborene 59. A following prospective study in the Braunschweig group could be the optimization of the synthesis of these diborenes, accompanied by the characterization and exploration of their reactivity patterns. Another part of this thesis dealt with the synthesis of diborenes bearing vinyl-group functionalized boron precursors. Based on the 1,1-diphenylethene starting material, the corresponding NHC-borane adduct was generated through several sequential reactions. Reduction with KC8 afforded an intensely colored reaction mixture that upon filtration had a 11B NMR resonance slightly downfield shifted with respect to the literature-known diborenes. However, isolation of the product and its identification were unsuccessful. Further attempts to prepare a diborene bearing a vinyl substituent with a phenyl group in the alpha-position were attempted but were ultimately unrewarding (scheme 3). Extending the work of Thomas Steffenhagen on the synthesis of the first diborene-bridged [2]diboraferrocenophane 109, experiments aimed at crystallizing 109 were successfully performed. Single crystal X-ray diffraction experiments confirmed the highly strained structure [2]diboraferrocenophane 109 bearing a cis-configured bridging diborene (scheme 4). Besides the synthesis and characterization of new diborenes, exploration of the chemistry of the reactive B=B double bond was also a major interest in this thesis. Therefore diborene reactivity studies with coinage metal complexes were carried out in order to evaluate the ability of the heterocyclic-substituted species 59, 85 and the diborene-bridged [2]diboraferrocenophane (109) to interact with these metal species. The reactions of 59, 85 and 109 with CuCl led to the formation of the corresponding copper complexes 111-113 (scheme 5). Single X-ray crystallographic analysis of 111 and 112 revealed a T-shaped geometry for these complexes. This geometry results through side-on coordination of the diborene to the metal center. The structural motif is equivalent to those of literature known diborene CuCl pi-complexes. Due to their instability, further characterization of the complexes 111-113 could not be achieved. In addition, the potential of the diborene CuCl pi-complexes was realized qualitatively via irradiation with UV light, indicating strong luminescence. The coordination of copper alkyne complexes at the B=B double bond of 59, 85 and 109 proceeded selectively and resulted in the formation of T-shaped complexes 114-116, which are structurally similar to the CuCl complexes 111 and 112 (scheme 5). Remarkably, 114 and 116 display enhanced stability compared with the CuCl complexes 111 and 112 and could be characterized via NMR spectroscopy. However contrary to the CuCl complexes, the diborene Cu alkynyl  complexes 114-116 showed no signs of luminescence while under UV irradiation. A concurrent detailled study of these findings is underway in the Braunschweig group. Owing to their energetically high-lying HOMOs, diborenes can easily be oxidized as shown in CV measurements. Therefore their application as reducing agent was explored in this thesis. The diborenes were utilized in redox reactions with (C7H7)BArf4 to yield the monoradical cations 117-120 (scheme 6). These species could be subsequently be verified by EPR spectroscopic measurements. Due to the instability of the radical species 117-120, further characterization could not be accomplished. Upon oxidation with elemental iodine (I2), the diborene 85 could be succcessfully converted to the dicationic species 121. This species can be considered an iodonium ion analogous to the compounds generated in reactions of alkenes with iodine (scheme 7). The solid state structure shows a three-membered heterocyclic ring in which the positively charged iodine atom symmetrically bridges the two boron atoms. The diborene species were tested for hydroboration reactivity in a manner analogous to the well-known hydroboration reaction between borane B-H bonds and C=C double bonds. This work utilized the B=B double bonds of diborenes to serve as alkene mimics. The reaction of the furanyl-substituted diborene 85 with catecholborane afforded the triborane 122. This product is presumably formed via syn-addition of the borane B-H bond to the diborene B=B double bond. Treatment of the same diborene 85 with durylborane led to the formation of a non-classical species in contrast to known alkene hydroboration reactivity. As can be seen in Scheme 8, the species formed seemingly arises upon cleavage of a B-Cfuryl bond (scheme 8). The detailled mechanism for this reaction has thus far not been elucidated. In reactions of 109 with catecholborane or durylborane, the triboranes 123 and 125 were generated, respectively (scheme 9). The structural motifs of both species show the ring expansion of the diboraferrocenophane that likely occurs through the insertion of the BDur and BCat fragments into the diborene B=B double bond. Additionally, in the case of the reaction with catecholborane, one boron atom must insert into the B-O bond to yield compound 123. The reaction patterns between the heterocycle-substitued diborene 85 and the [2]diboraferocenophane 109 towards hydroboration reagents have been shown to differ dramatically. One reason for this divergent reactivity could be the tendency of the diborene-bridged [2]diboraferrocenophane 109 to alleviate some of its ring strain. To gain further knowledge into this reactivity, theoretical studies are currently underway in the Braunschweig group. The electron rich B=B double bond of diborenes was further exploited in reactivity studies with elemental chalcogen reagents as well as chalcogen-containing reagents. The reaction products of the heterocycle-substituted diborenes 60 and 85 with elemental sulfur proved to be dependent upon the reaction conditions. Reactions performed at room temperature were observed to generate a mixture of diborathiiranes and trithiadiborolanes, whereas the selective formation of the trithiadiborolanes (126, 127) has been accomplished by ultrasonification of the reaction mixture. The trithiadiborolanes 126 and 127 are formed by the reductive insertion of three sulfur atoms into the B=B double bond while the partial insertion of one sulfur atom affords the diborathiirane 128. Further reactivity studies were conducted with triphenylphosphine sulfide and ethylene sulfide reagents in order to probe the application of sulfur-atom-donor compounds. These test reactions yielded successful transfer of the sulfur atom to the B=B double bonds of the diborene 85 (scheme 10). The reactions of diborenes 60 and 85 with elemental selenium or tellurium exclusively afforded the heterocyclic three-membered diboraseleniranes 129 and 130 and diboratelluriranes 131 and 132, respectively (scheme 11). The formation of similar five-membered heterocyclic compounds relative to the trithiadiborolanes was not observed under ultrasonification of the reaction mixtures. Besides the reactions with elemental chalcogens, the heterocyclic-substituted diborene 85 was succesfully reacted with diorganyldichalcogens (diphenyl disulfide and diphenyl diselenide), whereby 1,2-addition of the E-E single bond of the dichalcogens to the B=B double bond was observed (scheme 12). In contrast, the reaction of the thienyl-substituted diborene with diphenyl diselenide led to the formation of the desired compound 138, however isolation of the pure product was not successful. The structural motifs of 133 and 137 are indicative of either a syn-addition mechanism or a thiol-ene Michael-addition-type mechanism. A radical mechanism can be ruled out, since only one stereoisomer was generated through these studies. In order to validate these proposed mechanisms, ongoing theoretical studies are being performed by the Braunschweig group. The reaction of diborene-bridged [2]diboraferrocenophane 109 with diphenyl disulfide resulted in the formation of a sp2-sp3 diborane through cleavage of one B-CNHC bond. The short Fe-Bsp2 distance indicates some interaction between the Fe core and the Bsp2 atom. In a similar reaction the [2]diboraferrocenophane 109 formed an identical sp2-sp3 diborane when reacted with dimethyl disulfide (scheme 13). The B=B double bond of [2]diboraferrocenophane 109 was completely cleaved upon addition of two equivalents of diphenyl diselenide, yielding compound 139 (scheme 14). The simple 1,2-addition product of one Se-Se bond to the B=B double bond could not be detected or isolated as an intermediate, even if only one equivalent of diphenyl dislenide was applied. The reactions of the heterocycle-substituted diborenes 85 and 60 with isopropyl mercaptan result in addition of one H-S bond to the B=B double bonds to yield the syn-addition products 142 and 143 (scheme 14). In constrast, the anti-addition product 110 of the reaction of [2]diboraferrocenophane 109 with isopropyl mercaptan has been recently isolated by Thomas Steffenhagen. The reaction of 109 with a tert-butyl-mercaptan was also attempted. NMR spectroscopic investigations indicated the successful formation of the 1,2-addition product. Since attempts to crystallize 144 did not succeed, the structure of 144 could not be confirmed. KW - Mehrfachbindung KW - Bor KW - Ferrocenophane KW - Diboren KW - NHC KW - Heterocyclische Carbene <-N> Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140485 ER - TY - THES A1 - Trumpp, Alexandra T1 - Synthese und Reaktivität von Diboran(4)- und Diboran(4)-Addukt-Verbindungen T1 - Synthesis and reactivity of diborane(4)- and diborane(4)-adduct-compounds N2 - In der vorliegenden Arbeit wurde zum einen das Koordinationsverhalten von Lewis-Basen an die Lewis-aciden Borzentren der symmetrisch konfigurierten 1,2-Dihalogendiborane(4) des Typs B2R2X2 (R = NMe2, Mes, Dur, tBu; X = Cl, Br, I) und des unsymmetrisch 1,1 substituierten Diborans(4) F2BB(Mes)2, sowie die Eigenschaften und die Reaktivität der erhaltenen sp2–sp3 Diboran(4)-Verbindungen untersucht. Zum anderem wurde die Fähigkeit des 1,1-substituierten Diborans(4) F2BB(Mes)2 zur oxidativen Addition der B–F- bzw. B–B-Bindung an Bisphosphan-Platin(0)-Komplexe untersucht. N2 - The present work focuses on two different reactivities of diboranes(4): a)the coordination behaviour of Lewis bases to the Lewis-acidic boron centres of symmetrical 1,2-dihalodiboranes(4) of the type B2R2X2 (R = NMe2, Mes, Dur, tBu; X = Cl, Br, I) and the unsymmetrical 1,1-dimesityl-2,2-difluorodiborane(4) F2BB(Mes)2, furthermore the properties and reactivity of the prepared sp2–sp3 diboranes(4) were investigated, and b)the oxidative addition of 1,1-dimesityl-2,2-difluorodiborane(4) towards low-valent bis(phosphine)platinum precursors. KW - Diborane KW - Bor KW - Diboran(4) KW - Addukt KW - sp2-sp3 KW - boron KW - adduct Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136812 ER -