TY - THES A1 - Fuchs, Andreas Rudolf T1 - 3D-Pulverdruck von Zellkulturträgern mit Magnesium-Phosphat-Chemie T1 - 3d powder printing of scaffolds with a magnesium phosphate chemistry N2 - In der vorliegenden Arbeit wurden erstmals im 3D-Pulerdruckverfahren hergestellte Struvit-Matrizes auf ihre Eignung als Trägermaterial für Knochenzellen in vitro untersucht. Hierzu wurde die Zytokompatibilität sowie die chemische Löslichkeit von gedruckten Struvit-Strukturen betrachtet. In einem zweiten Schritt wurde untersucht, ob die biologische Funktion von BMP-2-Lösungen nach Durchlaufen des Druckprozesses erhalten bleibt und ob es möglich ist, BMP-2 unter Beibehaltung seiner biologischen Wirksamkeit direkt in Struvit-Matrizes zu drucken. Als Reaktanten zur Herstellung der Struvit-Matrizes wurde modifiziertes Farringtonit-Pulver mit definierter Körnung und eine äquimolare Binder-Lösung aus DAHP und ADHP verwendet. Die untersuchten Zellkulturträger mit Magnesiumammoniumphosphatchemie zeigten eine ausreichende Zytokompatibilität in vitro. Außerdem wurde gezeigt, dass thermolabile Proteine wie BMP-2 im 3D-Pulverdruckverfahren unter weitgehender Beibehaltung ihrer biologischen Wirksamkeit in vitro grundsätzlich prozessierbar sind. Die Freisetzung direkt eingedruckter Proteine aus den Struvit-Matrizes blieb jedoch hinter den Erwartungen zurück. Mit Struvit steht ein alternatives Zementsystem für den 3D-Pulverdruck zur Verfügung, welches spezifische Vorteile gegenüber den etablierten Calciumphosphaten bietet. Weitere Untersuchungen sind erforderlich, um die Ursache für die geringe BMP-Freisetzung aus den Struvit-Matrizes zu ermitteln und die Vorteile der neutralen Abbindereaktion voll nutzen zu können. N2 - The purpose of the present study was the investigation of 3d powder printed struvite-scaffolds as a carrier material for osteoblastic cells in vitro. For this purpose, their cytocompatibility and their chemical solubility were observed. In a second step we analysed, if BMP-2 could pass through the whole printing process without losing its biological function and furthermore if it is possible to print BMP-2 directly into struvite-scaffolds without a significant loss of biological activity. As reactants for the fabrication of the struvite-scaffolds, we used a modified farringtonite-powder and a binder solution consisting of an equimolar mixture of DAHP and ADHP. The investigated struvite-scaffolds showed a sufficient cytocompatibility. It was also shown, that thermolabile proteins, such as BMP-2, could be processed in 3d powder printing without losing much of their biological activity in vitro. The release of directly imprinted proteins out of the struvite scaffolds remained unsatisfying. Struvite is an alternative hydraulic-setting cement for 3d powder printing with certain advantages over the established calcium phosphate cements. Further investigations are necessary to identify the reasons for the low BMP-release out of the struvite-scaffolds and to take full advantage of the neutral setting reaction of struvite-cements. KW - Struvit KW - Rapid Prototyping KW - Knochen-Morphogenese-Proteine KW - 3D-Pulverdruck KW - BMP KW - Scaffold KW - 3d powder printing KW - scaffold KW - BMP KW - struvite Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-77415 ER - TY - THES A1 - Helf, Christian T1 - Herstellung von Polymethacrylat/Calciumphosphat-Implantatwerkstoffen durch den 3D-Pulverdruck T1 - Preparation of polymethacrylate/calcium phosphate implant materials via 3D powder printing N2 - Die Erstellung von komplex geformtem Knochenersatz wurde durch den 3D-Pulverdruck unter Verwendung von Calciumphosphatmaterialien beschrieben. Gegenstand der vorliegenden Arbeit war deren Modifikation durch die Verwendung von Methacrylatkunststoffen. Ziel war es, durch die Infiltration von nicht resorbierbaren Kunststoffen, wie sie in kommerziell erhältlichen Knochenzementen verwendet werden, die mechanischen Eigenschaften der nicht gesinterten Keramikstrukturen zu verbessern. Getestet wurden verschiedene Methoden der Infiltration sowie der nachfolgenden Polymerisationsinitiierung durch chemische, thermische oder photochemische Aktivatoren. Daneben erfolgte der Druck von Tricalciumphosphat-Pulvern, die mit Polymethylmethacrylat Partikeln versetzt wurden und durch eine hydraulische Verfestigungsreaktion mit Phosphorsäure aushärten. Die erstellten Materialien wurden auf ihre Porosität, ihre mechanischen Eigenschaften sowie auf die Phasenzusammensetzung ihrer anorganischen Matrix und den Konversionsgrat ihrer organischen Komponente hin untersucht. Es gelang, die freie Porosität der Calciumphosphat-Matrix durch Verwendung von flüssigen, monomeren Kunststoffen zu füllen und diese durch eine thermische Initiierung der radikalischen Polymerisation vollständig zur Aushärtung zu bringen. Bei der Reaktion kommt es neben einer Polymerisationskontraktion im organischen Bestandteil der Kunststoffe zu einer Phasenumwandlung der Bruschitanteile der Calciumphosphat-Matrix. Proben, die mit einem flüssigen Bisphenol-A-Derivat versetzt wurden, zeigten eine Verdreifachung ihrer Festigkeit und erreichten maximale Druckfestigkeiten von 99 MPa, Biegefestigkeiten von 35 MPa und einen E-Modul von 18 GPa. Verglichen mit den biomechanischen Eigenschaften des physiologischen Hartgewebes liegen die Werte damit deutlich über denen von spongiösem und unter denen von kortikalem Knochen. Eine künftige Optimierung erscheint durch die Schaffung einer chemischen Verbundphase zwischen dem anorganischen Calciumphosphat-Gefüge und den Polymerbestandteilen als aussichtsreich. N2 - The production of complex shaped bone graft was described by the 3D powder printing using calcium phosphate materials. The present work dealt with the modification of these materials by adding methylacrylate materials. The objective was to improve the mechanical properties of non-sintered ceramic structures by the infiltration of non-resorbable plastics such as used in commercialized bone cements. Different methods of infiltration as well as chemical, thermal or photochemical polymerization activators have been tested. In addition to that, tricalcium phosphate powders have been enriched by polymethylmethacrylate particles before being printed and cured by an hydraulic hardening reaction with phosphoric acid. The prepared materials have been tested for their porosity, their mechanical properties as well as for the phase composition of their inorganic matrix and the conversion rate of their organic components. It could be achieved to fill the open porosity of printed calcium phosphate matrix by using liquid, monomeric plastics and to cure them completely through a thermal initiation of radical polymerization. Besides the polymerization contraction in the organic component, the thermal treatment led to a phase transformation of the calcium phosphate brushite matrix. Samples, which were infiltrated with a liquid bisphenol-A derivative, showed a threefold increase of their strength and reached a maximum compressive strength of 99 MPa, a flexural strength of 35 MPa and a Young´s modulus of 18 GPa. Compared to biomechanical properties of physiological hard tissues, the levels were significantly higher than those of cancellous and lower than those of cortical bones. To further optimize, it seems promising to create a chemical bond between the inorganic phase of calcium phosphate microstructure and polymer components. KW - Rapid Prototyping KW - Knochenersatz KW - Knochenzement KW - Methacrylsäuremethylester KW - 3D-Pulverdruck KW - Calciumphosphat KW - Rapid Prototyping KW - 3D powder print KW - bone cements KW - methacrylate KW - calcium phosphate Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-39575 ER - TY - THES A1 - Klarner, Michael T1 - 3D-Pulverdruck von Calciumphosphat-Keramiken mit polymeren und anorganischen Bindersystemen T1 - Polymer and inorganic 3D-rapid prototyping systems to build calciumphospate-ceramics N2 - Die vorliegende Arbeit hatte die Herstellung phasenreiner ß-Tricalciumphosphat (ß-TCP) - Implantate durch 3D-Pulverdruck zum Ziel. Variiert wurden hierbei die zum Druck verwendeten Pulver-Binder-Systeme. Als Verfestigungsmechanismen wurden hydraulisch abbindende Pulver-Binder-Systeme aus Tricalciumphosphat / Phosphorsäure bzw. Tetracalciumphosphat / Citronensäure untersucht, sowie der Zusatz quellfähiger Polymere zum Pulver, etwa Polyacrylsäure oder Hydroxypropylmethyl-Cellulose. Die gedruckten Strukturen wurden anschließend in Hinblick auf die zu erreichende Auflösung, die mechanischen Eigenschaften und die Zusammensetzung des Endproduktes verglichen. N2 - Custom made ß-tricalcium phosphate (ß-TCP) bone substitutes with a macroporous architecture were fabricated in this study using 3D powder printing with three different preparation strategies and analysed with regard to their mechanical and physical properties. Samples were either obtained by (A) using hydroxypropylmethylcellulose (5wt%) modified TCP (Ca/P=1.5) powder with water as a binder, (B) by using phosphoric acid (10%) as a binder with a calcium phosphate powder of a Ca/P ratio of 1.7 and different binder/volume ratios or (C) by printing a tetracalcium phosphate (Ca/P=2.0) / dicalcium phosphate (Ca/P=1.0) / tricalcium phosphate powder mixture with citric acid (25wt%). The production process was followed by a heat treatment at 1100°C for all variations to produce phase pure ß-TCP (Ca/P=1.5). The results showed that ß-TCP samples fabricated according to method (B) showed the best printing resolution with a minimum macropore diameter of approximately 500µm and a compressive strength of up to 7.4 ± 0.7 MPa. Since the samples could be removed from the powder bed immediately after printing, this method would significantly decrease processing time for commercial fabrication. KW - Rapid Prototyping KW - Biomaterial KW - 3D-Pulverdruck KW - Calciumphosphat KW - Tricalciumphosphat KW - Knochenersatzwerkstoff KW - Biokompatibel KW - ß-tricalcium phosphate KW - beta TCP KW - 3D - rapid prototyping KW - bone substitute Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36373 ER - TY - THES A1 - Kraski, Boris T1 - Zytokompatibilität von Bruschit. Ein im 3D-Pulverdruckverfahren hergestelltes Zellkulturträgermaterial T1 - Cytocompatibility of brushite cell culture scaffolds made by three-dimensional powder printing N2 - In der vorliegenden Arbeit wurde die Eignung einer im 3D-Pulverdruckverfahren fabrizierten Trägerstruktur auf Calciumphosphat-Basis (Bruschit) als Zellkultur-Scaffold untersucht. Dazu wurden die Konstrukte in vitro mit osteoblastären Zellen besiedelt und deren Proliferations- und Differenzierungsverhalten über eine Kultivierungsdauer von 12 Tagen analysiert. Als Parameter dienten hierbei die Zellviabilität, die Aktivität des osteoblastären Enzyms Alkalische Phosphatase sowie die Mediumkonzentration von Osteocalcin. Des Weiteren wurde der pH-Wert des Kulturmediums sowie die Konzentrationen der freien Elektrolyte Calcium und Phosphat untersucht. Die Ergebnisse belegen eine gute Zytokompatibilität des Trägermaterials. Diese äußerte sich in einer progredienten Proliferation phänotypisch osteoblastärer Zellen (gemäß Rasterelektronenmikroskopie). Die Zellen exprimierten das ostoblastentypische Enzym Alkalische Phosphatase, welches als früher Differenzierungsmarker gilt. Die Analyse der Osteocalcinproduktion führte aufgrund methodischer Probleme nicht zu verwertbaren Ergebnissen. Die Untersuchung des verbrauchten Zellkulturmediums ergab keine unphysiologischen Schwankungen des pH-Wertes. Jedoch konnten signifikante Veränderungen der Konzentration an freien Calcium und Phosphat-Ionen im Medium festgestellt werden. Diese sind auf die Löslichkeit des Trägermaterials im physiologischen Milieu zurückzuführen. Zusammenfassend konnte mittels vorliegender in vitro Versuche eine geeignete Zytokompatibilität des untersuchten Materials herausgearbeitet werden. Für mögliche klinische Anwendungen zum Knochenersatz sind weitergehende Untersuchungen, insbesondere osteokonduktiver Eigenschaften im orthotopen Implantatlager im Rahmen von in vivo Untersuchungen, erforderlich. N2 - This study investigated the cytocompatibility of low-temperature direct 3-D printed calcium phosphate scaffolds in vitro. The fabrication of the scaffolds was performed with a commercial 3-D powder printing system. Diluted phosphoric acid was printed into tricalcium phosphate powder, leading to the formation of dicalcium phosphate dihydrate (brushite). The biocompatibility was investigated using the osteoblastic cell line MC3T3-E1. Cell viability and the expression of alkaline phosphatase served as parameters. The culture medium was analyzed for pH value, concentration of free calcium and phosphate ions and osteocalcin. The brushite scaffolds showed a considerable increase of cell proliferation and viability. The activity of alkaline phosphatase showed a similar pattern. Optical and electron microscopy revealed an obvious cell growth on the surface of the brushite scaffolds. Analysis of the culture medium showed minor alterations of pH value within the physiological range. The content of osteocalcin of the culture medium was reduced by the printed scaffolds due to adsorption. We conclude that the powder printed brushite matrices have a suitable biocompatibility for their use as cell culture scaffolds. The material enables osteoblastic cells in vitro to proliferate and differentiate due to the expression of typical osteoblastic markers. KW - Rapid Prototyping KW - Biomaterial KW - 3D-Pulverdruck KW - Calciumphosphat KW - Bruschit KW - Knochenersatzwerkstoff KW - Biokompatibel KW - 3D - rapid prototyping KW - bone substitute KW - brushite Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-78615 ER - TY - THES A1 - Vorndran, Elke T1 - Rapid-Prototyping hydraulisch härtender Calcium- und Magnesiumphosphatzemente mit lokaler Wirkstoffmodifikation T1 - Rapid-prototyping of hydraulic calcium- and magnesium phosphate cements with local drug modification N2 - Ziel dieser Arbeit war die Herstellung individuell formbarer Strukturen mittels des 3D-Pulverdrucks auf Basis von bei Raumtemperatur hydraulisch abbindenden Knochenzementpulvern. Neben der Entwicklung neuartiger Zementformulierungen auf Basis von Magnesiumphosphaten war vor allem die gleichzeitige Ausstattung der Werkstoffe mit temperaturlabilen und bioaktiven Verbindungen ein wichtiger Entwicklungsschritt. Die Lokalisation der Wirkstoffe korreliert dabei mit entsprechenden Farbinformationen im Design der Konstrukte, die durch einen Mehrfarbendrucker physikalisch abgebildet werden. Das auf Calciumphosphat basierende System hat den Nachteil, dass die Abbindereaktion bei stark sauren pH-Werten abläuft, was negative Auswirkungen auf die gleichzeitige Ausstattung mit sensitiven Wirkstoffen hat. Zur Lösung dieser Problematik wurde ein neues Knochenzementpulver auf Magnesiumphosphatbasis entwickelt, welches unter neutralen pH-Bedingungen mit ammoniumhaltigem Binder zu dem Mineral Struvit abbindet. Das Zementpulver aus Trimagnesiumphosphat wurde bezüglich der pulvertechnologischen Eigenschaften, wie Partikelgröße, Partikelgrößenverteilung, Glättungseigenschaften und Schüttdichte sowie hinsichtlich des Abbindeverhaltens charakterisiert und für den Druckprozess optimiert. Die hohe Strukturgenauigkeit ermöglichte die Darstellung von makroporösen Strukturen mit einem minimalen Porendurchmesser von ca. 200 µm. Gute mechanische Kennwerte der gedruckten Strukturen, sowie eine hohe Umsetzungsrate zur gewünschten Phase Struvit wurden durch eine Nachhärtung in Ammoniumphosphatlösung erhalten. Die Druckfestigkeit betrug > 20 MPa und der Phasenanteil von Struvit konnte auf insgesamt 54 % gesteigert werden. Die Darstellung von wirkstoffmodifizierten Calciumphosphat- und Magnesiumphosphatstrukturen durch Verwendung eines Mehrfarbendruckers wurde beginnend vom Design der Strukturen bis hin zur experimentellen Bestimmung der Korrelation von Farbinformation und Binderapplikation etabliert. Zur Sicherstellung einer hohen Druckqualität und der Ortsständigkeit gedruckter Wirkstoffe erwies sich eine zusätzliche Modifikation des Tricalciumphosphatpulvers mit quellfähigen Polymeren (Hydroxypropylmethyl-cellulose (HPMC) bzw. Chitosan) als erfolgreich. Eine maximale Auflösung von ca. 400 µm konnte für eine HPMC/Chitosan/Calciumphosphat-Variante erreicht werden, während das hochreaktive Magnesiumphosphat/Magnesiumoxid-System eine Auflösung von 480 µm aufwies. Die Ortsständigkeit eingebrachter Lösungen war Voraussetzung für die Steuerung der Freisetzungskinetik. Das Freisetzungsverhalten in vitro wurde in Abhängigkeit von der Wirkstofflokalisation (homogen, Depot, Gradient) innerhalb der Matrix und unter Einbringung zusätzlicher polymerer Diffusionsbarrieren für den Wirkstoff Vancomycin untersucht. Dabei zeigte sich, dass die Modifikation der Matrices mit Polymeren zu einer verzögerten Freisetzung führte. Die lokale Wirkstoffmodifikation der Matrices in Form eines Depots oder Gradienten hatte Einfluss auf die Freisetzungskinetik, wobei eine lineare Freisetzung mit der Zeit (Kinetik 0. Ordnung) erreicht werden konnte. Die applizierten Wirkstoffe umfassten sowohl niedermolekulare Verbindungen, wie etwa das Antibiotikum Vancomycin oder das Polysaccharid Heparin, als auch proteinbasierte Faktoren wie den Knochenwachstumsfaktor rhBMP-2. Beurteilt wurde die pharmakologische Wirksamkeit der Verbindungen nach dem Druck, sowie nach der Freisetzung aus einer Calciumphosphatmatrix für den Wirkstoff Vancomycin. Es konnte belegt werden, dass die biologische Aktivität nach dem Druckprozess zu über 80 % erhalten blieb. Limitierend war der stark saure pH-Wert bei bruschitbasierten Systemen, der zu einer Inaktivierung des Proteins führte. Diesem Problem könnte durch die Nutzung des neutral abbindenden Magnesiumphosphatsystems entgegengewirkt werden. Abschließend erfolgten eine mikrostrukturelle Charakterisierung der Calciumphosphat- und Magnesiumphosphatmatrices mittels µ-CT-Analyse und Heliumpyknometrie, sowie eine quantitative Phasenanalyse nach Rietveld. Experimentell konnte nachgewiesen werden, dass mit Hilfe des 3D-Pulverdruck die Darstellung von Makroporen > 200 µm möglich ist. Die Analyse der Phasenzusammensetzung ergab, dass die Umsetzungsrate von Tricalciumphosphat und Trimagnesiumphosphat zu den gewünschten Phasen Bruschit und Struvit infolge des Nachhärtungsprozesses signifikant gesteigert werden konnte. Im Zuge dessen nahm die Porosität der gedruckten Matrices der Phase Struvit von 58 % auf 26 % und der Phase Bruschit von 47 % auf 38 % ab. N2 - Aim of this study was the room temperature fabrication of individually formed structures via 3D-powder printing based on hydraulic bone cements. In addition to the development of a novel cement formulation composed of magnesium phosphate, the simultaneous modification of matrices during the printing process with temperature sensitive and bioactive drugs was an important part of the work. The drug localization within the matrices is hereby correlated with an analogous colour design of the structures, which is physically reproduced by the multi-colour-printer. The calcium phosphate based system has the disadvantage of a strongly acidic setting reaction, which has negative effects on the simultaneous modification with sensitive bioactive agents. To solve this problem a novel bone cement formulation based on magnesium phosphate was established. This cement reacts with ammonium based binder solution within seconds to form the mineral struvite at neutral pH. The technological properties of the of trimagnesium phosphate cement powder, including particle size, particle size distribution, spreadability, powder density, and the setting behaviour, were characterized and optimized for the printing process. The high structural accuracy enabled the production of macroporous structures with a minimal pore diameter of approximately 200 µm. Proper mechanical characteristics of the printed structures as well as a high degree of conversion to the struvite phase were achieved by post-hardening in ammonium phosphate solution. The compressive strength could be increased to more than 20 MPa and the phase fraction of struvite could be increased to a maximum value of a total of 54 %. The fabrication of drug loaded calcium phosphate and magnesium phosphate scaffolds using a multi-colour-printer was established, beginning with the structure design and following the experimental verification of the correlation between the colour information and the applied binder. To guarantee a high accuracy of printing and the localization of the printed drugs, a supplemental modification of the tricalcium phosphate powder with swellable polymers (hydroxypropylmethylcellulose (HPMC) or chitosan) was successful. A maximum resolution of about 400 µm was achieved by an HPMC/chitosan/calcium phosphate composition, whereas the highly reactive magnesium phosphate/magnesium oxide system showed a resolution of about 480 µm. The localization of the applied solutions was a prerequisite to control the release kinetics of the drugs. The release kinetic of vancomycin was investigated in vitro depending on the drug localization (homogeneous, depot, gradient-like) within the matrix and by adding additional polymeric diffusion barriers. It could be shown that the polymeric modification of the matrices resulted in a delayed drug release. By discrete and depot-like or graded drug distributions within the matrices the release kinetic could be controlled, achieving a linear release with time (zero order release). The administered agents involved both low molecular compounds like the antibiotic vancomycin or the polysaccharide heparin and protein based factors like bone morphogenic factor rhBMP-2. Evaluation of pharmacological activity of the agents after printing as well as after release of vancomycin from a calcium phosphate matrix was determined, indicating that the bulk biological activity of more than 80 % was retained during the printing process. The limiting factor of the brushite based system was the strong acidic pH, which resulted in an inactivation of protein-based bioactives. This problem may be solved by using neutrally setting magnesium phosphate systems. Finally a microstructural characterization of calcium phosphate and magnesium phosphate matrices by µ-CT analysis and helium pycnometry as well as a quantitative phase analysis by Rietveld was performed. It was demonstrated, that 3D-printing allows the manufacturing of macro pores > 200 µm. The analysis of phase composition showed a significant increase of the degree of conversion from tricalcium phosphate or trimagnesium phosphate to the phases brushite or struvite due to the post hardening process. Hence the porosity of the printed matrices decreased from 58 % to 26 % for struvite and from 47 % to 38 % for brushite. KW - 3D-Druck KW - Calciumphosphate KW - 3D Pulverdruck KW - Calciumphosphat KW - Magnesiumphosphat KW - 3D powder printing KW - calcium phosphate KW - magnesium phosphate KW - Magnesiumphosphate KW - Rapid Prototyping KW - Kontrollierte Wirkstofffreisetzung Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70245 ER -