TY - THES A1 - Maier, Florian C. T1 - Spectromicroscopic characterisation of the formation of complex interfaces T1 - Spektromikroskopische Charakterisierung der Bildung komplexer Grenzflächen N2 - Within the framework of this thesis the mechanisms of growth and reorganisation of surfaces within the first few layers were investigated that are the basis for the fabrication of high quality thin films and interfaces. Two model systems, PTCDA/Ag(111) and CdSe/ZnSe quantum dots (QD), were chosen to study such processes in detail and to demonstrate the power and improvements of the aberration corrected spectromicroscope SMART [1] simultaneously. The measurements benefit especially from the enhanced transmission of the microscope and also from its improved resolution. SMART, the first double–aberration corrected instrument of its kind [2], provided comprehensive methods (LEEM/PEEM, μ–LEED, μ–XPS) to study in–situ and in real time the surface reorganisation and to determine morphology, local structure and local chemical composition of the resulting thin film. Complementarily, a commercial AFM [3] was used ex–situ. XPEEM and μ–XPS measurements were made possible by attaching SMART to the high flux density beamline of the soft–X–ray source BESSY–II [4]. PTCDA/Ag(111) – Growth and structure of the first two layers Although PTCDA/Ag(111) is one of the most intensely studied model systems for the growth of organic semiconductor thin films, it still offers new insights into a complex growth behaviour. This study enlightens the temperature dependant influence of morphological features as small as monatomic Ag steps on the growth process of the first two layers. At low temperatures, single Ag steps act as diffusion barriers. But interdiffusion was observed already for the 2nd layer whereas domain boundaries in the 1st PTCDA–layer persist for crystallite growth in the 2nd layer. 1st layer islands are more compact and the more dendritic development of the 2nd layer indicates reduced interaction strength between 2nd and 1st layer. These findings were explained by a model consisting of structural and potential barriers. The second part of the PTCDA study reveals a variety of phases that appears only if at least two layers are deposited. Besides the six known rotational domains of the interface system PTCDA/Ag(111) [5], a further manifold of structures was discovered. It does not only show a surprising striped image contrast, but the 2nd layer also grows in an elongated way along these so–called ’ripples’. The latter show a rather large period and were found in a wide temperature range. Additionally the μ-LEED pattern of such a domain shows a new super–superstructure as well. This phase is explained by a structural model that introduces a rotated, more relaxed domain in the 2nd layer that does not exist in the first layer. Its structural parameters are similar to those of the bulk unitcells of PTCDA. The model is confirmed by the observation of two different rotational domains that grow on top of one single ’substrate’ domain in the 1st layer. The orientations of the ripple phases fit as well to the predictions of the model. The growth direction along the ripples corresponds to the short diagonal of the super–superstructure unitcell with diamond–like shape. CdSe/ZnSe – Inverse structuring by sublimation of an α-Te cap With the second model system the formation of CdSe quantum dots (QD) from strained epi-layers was investigated. In this case the structures do not form during deposition, but rather during sublimation of the so–called ‘ignition cap’. For these pilot experiments not only the process of QD formation itself was of interest, but also the portability of the preparation and the prevention of contaminations. It was found that the α-Se is well suited for capping and the last step of the QD preparation, the sublimation of the α-Te cap, needs a sufficiently high rate in rise of temperature. Subsequently the cap, the process of desorption and the final surface with the quantum structures were investigated in detail. The cap was deposited by the MBE-group in Würzburg as an amorphous Te layer but was found to contain a variety of structures. Holes, cracks, and micro–crystallites within an α-Te matrix were identified. Sublimation of the “ignition cap” was observed in real–time. Thus the discovered cap-structures could be correlated with the newly formed features as, e.g., QDs on the bare CdSe surface. Since CdSe/ZnSe QDs prefer to form in the neighbourhood of the Te μ–crystallites, Te was found to play a major role in their formation process. Different explanations as the impact of Te as a surfactant, an enhanced mobility of adatoms or as stressor nuclei are discussed. The spectromicroscopic characterisation of the CdSe surface with QDs revealed the crystallographic directions. An increased Cd signal of the film was found at positions of former holes. Several possibilities as segregation or surface termination are reviewed, that might explain this slight Cd variation. Therewith, an important step to a detailed understanding of the complex reorganisation process in coating systems could be achieved. N2 - Im Rahmen dieser Arbeit wurden der Schicht– und Grenzflächenpräparation zu Grunde liegende Wachstums– und Reorganisationsmechanismen anhand von zwei Modellsystemen in–situ untersucht. Diese waren auch geeignet, das Potential von SMART [1, 2], dem ersten doppelt aberrationskorrigierten, niederenergetischen Elektronen-Spektromikroskop, in seiner weiter optimierten Version zu demonstrieren. Dabei wurde besonders von der gesteigerten Transmission des Mikroskops, aber auch von der verbesserten Auflösung durch die Aberrationskorrektur profitiert. SMART erlaubt nicht nur Messungen unter UHV–Bedingungen, sondern auch in Echtzeit, wobei zwischen einer Reihe von Methoden (LEEM/PEEM, μ–LEED, μ–XPS) kurzfristig und in–situ gewechselt werden kann. Ergänzt wurden die Messungen mit Hilfe eines kommerziellen AFM [3]. Erst die Installation von SMART an einem Strahlrohr von BESSY–II [4] mit hoher Flussdichte im Bereich der weichen Röntgenstrahlung ermöglichte die XPEEM– und μ–XPS–Messungen. PTCDA/Ag(111) – Wachstum und Struktur der ersten beiden Lagen Das ausgiebig untersuchte Modellsystem PTCDA/Ag(111) sorgt nach wie vor für Überraschungen. So konnte bei den vorgestellten Untersuchungen der Einfluss der Morphologie auf den Wachstumsprozess der ersten beiden Lagen detailliert beobachtet werden. Monoatomare Ag–Stufen fungieren dabei als T–abhängige Diffusionsbarrieren für die PTCDA–Moleküle in der ersten Lage. Hingegen ist die Diffusion von Molekülen der zweiten Lage über Domänengrenzen der ersten Lage hinweg leicht möglich, wenngleich PTCDA–Domänengrenzen der ersten ML auch für Kristallite in der zweiten Lage begrenzend sind. Das unterschiedliche Domänenwachstumsverhalten wird dadurch erklärt, dass die Wechselwirkungsstärke zwischen zweiter und erster Lage gegenüber der zwischen erster Lage und Ag(111) reduziert ist und dass benachbarte Domänen unterschiedliche Struktur aufweisen. Ein zweiter Teilaspekt beleuchtet den Polymorphismus der zweiten Lage PTCDA auf Ag(111). Neuartige Domänen zeigen nicht nur einen ungewöhnlichen, linear variierenden Kontrast, sondern auch anisotropes Wachstum in einem weiten Temperaturbereich, bevorzugt entlang der sogenannten ’Ripple’. Mit μ–LEED wurde die neue kristallographische Über–Überstruktur charakterisiert. Zudem wurden in Dunkelfeld-LEEM zwei unterschiedliche Rotationsdomänen auf einer einzelnen Substratdomäne beobachtet. Die Abmessungen der Einheitszelle der Moleküle in der zweiten Lage ähneln denen der ersten Lage, sind aber gegenüber diesen um unerwartete 75° gedreht. Zur Erklärung dieser Beobachtungen wird ein Strukturmodell vorgeschlagen, das aus zwei unterschiedlichen und daher verspannt gestapelten PTCDA–Domänen besteht. Derartige Domänen wachsen bevorzugt entlang der „Ripples“ und damit entlang der kurzen Diagonalen der vorgeschlagenen Über-Überstruktur auf. Die vorhergesagten Orientierungen der „Ripples“ wurden ebenfalls nachgewiesen. Der linienförmige Kontrast in der zweiten Lage wird durch eine Oszillation des Lagenabstandes erklärt. CdSe/ZnSe – Rückwirkende Strukturbildung durch Sublimation einer α–Te-Deckschicht Weiterhin wurde die Bildung von CdSe-Quantenpunkten (QD) aus verspannten CdSe/ZnSe(001)-Schichten untersucht, die sich bei Sublimation der Te-Schicht reorganisieren. In Pilotexperimenten mit einem Spektromikroskop an CdSe/ZnSe-Heterostrukturen wurden sowohl der Bildungsprozess der Quantenstrukturen selbst detailliert untersucht, als auch die Tauglichkeit des Kontaminationsschutzes sorgfältig verifiziert. Die in-situ Sublimation der mikromorphen Te-Deckschicht, Auslöser für die QD-Bildung, erfordert ausreichend hohe Heizraten. Schrittweise wurden die Deckschicht, der Desorptionsprozess und die resultierende Oberfläche mit den Quantenstrukturen unter die Lupe genommen. Die als α-Te abgeschiedene Kappe weist eine Vielzahl von Strukturen auf, welche als Löcher, Risse und Mikrokristallite in einer α-Te Matrix identifiziert und charakterisiert wurden. Durch die Echtzeitbeobachtung des Desorptionsprozesses konnten die Positionen der Strukturen in der Kappe mit den zurückbleibenden bzw. neu entstehenden Strukturen wie den Quantenpunkten korreliert werden. Aus der relativen Anordnung der Strukturen wird gefolgert, dass die Präsenz von Tellur bei der Bildung der Quantenpunkte eine wichtige Rolle spielt. Verschiedene Erklärungsansätze wie zum Beispiel die Wirkung als „Surfactant“, Erhöhung der Diffusion und spannungsinduzierte Nukleation werden diskutiert. Die LEED-Charakterisierung der QD-besetzten CdSe-Oberfläche erlaubt die Korrelation mit den kristallographischen Richtungen des Substrats. Das XPEEM-signal weist auf Cd–Segregation unter den Löchern hin, lässt aber auch die Deutung als Cd-terminierte Oberflächenrekonstruktion zu. Damit ist ein erster, wichtiger Schritt zur detaillierten Aufklärung des Reorganisationsprozesses des komplexen Schichtsystems bei der Bildung von selbstorganisierten Quantenpunkten gelungen. KW - Halbleiterschicht KW - Wachstumsprozess KW - Spektroskopie KW - Mikroskopische Technik KW - Perylendianhydrid KW - Silber KW - Quantenpunkt KW - Cadmiumselenid KW - Oberflächenanalyse KW - Röntgenspektroskopie KW - Elektronenmikroskopie KW - Semiconductor KW - organic KW - PTCDA KW - Ag(111) KW - anorganic KW - quantum dot KW - CdSe KW - ZnSe KW - CdTe KW - Spectromicroscopy KW - LEEM KW - XPEEM KW - LEED KW - XPS Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65062 ER - TY - THES A1 - Kießling, Tobias T1 - Symmetry and Optical Anisotropy in CdSe/ZnSe Quantum Dots N2 - Halbleiter Quantenpunkte (QDs) erregen immenses Interesse sowohl in der Grundlagen- als auch der anwendungsorientierten Forschung, was sich maßgeblich aus ihrer möglichen Nutzung als Fundamentalbausteine in neuartigen, physikalisch nicht-klassischen Bauelementen ergibt, darunter die Nutzung von QDs als gezielt ansteuerbare Lichtquellen zur Erzeugung einzelner Paare polarisationsverschränkter Photonen, was einen Kernbaustein in den intensiv erforschten optischen Quantenkryptographiekonzepten darstellt. Ein goßes Hindernis stellen hierbei die in allen aktuell verfügbaren QDs intrinsisch vorhandenen, ausgeprägten Asymmetrien dar. Diese sind eine Begleiterscheinung der selbstorganisierten Wachstumsmethoden der QDs und sie treten in verschiedenen Gestalten, wie Formasymmetrie oder inhomogenen Verspannungsverhältnissen innerhalb der QDs, auf. Im Gegenzug verursachen jene Asymmetrien deutliche Anisotropien in den optischen Eigenschaften der QDs, wodurch das optische Ansprechverhalten klassisch beschreibbar wird. Aus Sicht der anwendungsorientierten Forschung stehen Asymmetrien daher im Ruf ungewollte Nebeneffekte zu sein und es wird mit großem Aufwand daran geforscht, diese unter Kontrolle zu bringen. Für die Grundlagenforschung sind anisotrope QDs jedoch ein interessantes Modellsystem, da an ihnen fundamentale Quantenphysik beobachtbar ist, wobei anders als in Atomen die einschnürenden Potentiale nicht zwangsläufig zentralsymmetrisch sein müssen. Auf der Basis winkel- und polarisationsaufgelöster Photolumineszenzuntersuchungen (PL) wird die Anisotropie des linearen Polarisationsgrades in der Lumineszenzstrahlung (kurz: optische Anisotropie) der an CdSe/ZnSe-QDs gebundenen Exzitonen untersucht. Es wird gezeigt, dass die Elektron-Loch Austauschwechselwirkung in asymmetrischen QDs zu einer effektiven Umwandlung linearer in zirkulare Polarisationsanteile und umgekehrt führt. Die experimentellen Befunde lassen sich erfolgreich im Rahmen eines Exziton-Pseudospinformalismus, der auf der durch die Austauschwechselwirkung induzierten Feinstruktur der hellen Exzitonzustände basiert, beschreiben. Dies legt nahe, dass QDs funktionelle Bauelemente in hochintegrierten rein optischen Architekturen jenseits der viel diskutierten nichtklassischen Konzepte darstellen können, insbesondere als optische Polarisationskonverter und/oder -modulatoren. Weiterhin wird der Exziton-Pseudospinformalismus in Untersuchungen zur optischen Ausrichtung in QDs genutzt und gezeigt, wie so die anders nicht direkt messbare Symmetrieverteilung eines Ensembles von QDs detektiert werden kann. Diese Messungen stellen ein wertvolles Bindeglied zwischen optischen und strukturellen Untersuchungen dar, da sie einen direkten experimentellen Zugang zum mit topologischen Methoden nicht einsehbaren Anordnungsverhalten eingekapselter QDs liefern. Abschließend wird die optische Anisotropie unter Anlegung eines Magnetfeldes in der QD-Ebene untersucht. Dabei wird beobachtet, dass die Achse der linearen Polarisation der Lumineszenzstrahlung entweder entgegengesetzt zur Magnetfeldrichtung in der Probenebene rotiert oder fest entlang einer gegebenen kristallographischen Achse orientiert ist. Eine qualitative Auswertung der Ergebnisse auf der Basis des exzitonischen Pseudospin-Hamiltonian belegt, dass diese Polarisationsanteile durch isotrope und anisotrope Beiträge des Schwerloch Zeeman Terms begründet werden, wobei die anisotropen Anteile für ein kritisches Magnetfeld von B=0, 4 T gerade die forminduzierten uni-axialen Polarisationsanteile kompensieren, so dass ein optisches Verhalten resultiert, das man für hochsymmetrische QDs erwarten würde. Zur quantitativen Beschreibung wurde der vollständige k.p-Hamiltonianin der Basis der Schwerlochexzitonzustände numerisch ausgewertet und damit die optische Polarisation als Funktion der Magnetfeldstärke und -orientierung berechnet. Die Modellrechnungen stimmen mit die gemessenen Daten im Rahmen der experimentellen Unsicherheit mit einem jeweils probenspezifischen Parametersatz quantitativ überein. Dabei wird gezeigt, dass ein Ensemble von QDs ein optisches Signal, das man für hochsymmetrisches QDs erwarten würde, erzeugen kann ohne dass eine Symmetrisierung der hellen Exzitonzustände stattfindet, wie sie für nicht-klassische Anwednungen notwendig ist. Daraus ergibt sich, dass Konzepte, die Magnetfelder in der Probenebene zur Symmetrisierung des optischen Signals nutzen, mindestens die vier stark durchmischten Schwerlochexzitonzusände berücksichtigen müssen und eine Beschreibung, die nur die beiden hellen Exzitonzustände in Abwesenheit magnetischer Felder beinhaltet, zu kurz greift. Für die kontrovers geführte Diskussion bezüglich aktueller experimenteller Studien zur Erzeugung polarisationsverschränkter Photonen in asymmetrischen QDs ist daher zu verstehen, dass von solch einer vereinfachten Beschreibung nicht a priori erwartet werden kann, verlässliche Ergebnisse in Bezug auf exzitonische Bellzustände zu erzeugen. N2 - Semiconductor Quantum Dots (QDs) have been attracting immense interest over the last decade from both basic and application-orientated research because of their envisioned use as fundamental building blocks in non-classical device architectures. Their presumable ease of integration into existing semiconductor technology has bought them the reputation of being cost-efficiently scalable and renders them a place among the top candidates in a wide range of proposed quantum logic and quantum information processing schemes. These include the highly acclaimed use of QD as triggered sources of single pairs of entangled photons, which is a key ingredient of most of the intensivly investigated optical quantum cryptography operations. A big obstacle towards these goals are the pronounced asymmetries that are intrinsically present in all currently availabe semiconductor QD systems. They are a natural by-product that stems from the employed self-assembled growth methods and manifest in various forms such as shape-asymmetry, inhomogeneous strain distribution within the QD and concomittant piezo-elecric fields. These asymmetries in return give rise to distinct anisotropies in the optical properties of QDs, which in fact render their optical response classic. For device oriented research these anisotropies are therefore typically considered unwanted and actively researched to be controlled. They are, however, interesting from a fundamental point of view, as anisotropic QDs basically provide a testbed system for fundamental atom-like quantum physics with non-centrosymmetric potentials. As shall be shown in the current work, this gives rise to novel and interesting physics in its own right. Employing photoluminescence spectroscopy (PL) we investigate the optical anisotropy of the radiative recombination of excitons confined to CdSe/ZnSe QDs. This is done by angle-dependent polarization-resolved PL. We demonstrate experimentally that the electron-hole exchange interaction in asymmetric QDs gives rise to an effective conversion of the optical polarization from linear to circular and vice versa. The experiment is succesfully modeled in the frame of an exciton pseudospin-formalism that is based on the exchange induced finestructure splitting of the radiative excitonic states and unambiguously proves that the observed polarization conversion is the continuous-wave equivalent to quantum beats between the exchange split states in the time domain. These results indicate that QDs may offer extended functionality beyond non-classical light sources in highly integrated all-optical device schemes, such as polarization converters or modulators. In a further extension we apply the exciton pseudospin-formalism to optical alignment studies and demonstrate how these can be used to directly measure the otherwise hidden symmetry distribution over an ensemble of QDs. This kind of measurement may be used on future optical studies in order to link optical data more directly to structural investigations, as it yields valuable information on capped QDs that cannot be looked at directly by topological methods. In the last part of this work we study the influence of an in-plane magnetic field on the optical anisotropy. We find that the optical axis of the linear polarization component of the photoluminescence signal either rotates in the opposite direction to that of the magnetic field or remains fixed to a given crystalline direction. A qualitative theoretical analysis based on the exciton pseudospin Hamiltonian unambiguously demonstrates that these effects are induced by isotropic and anisotropic contributions to the heavy-hole Zeeman term, respectively. The latter is shown to be compensated by a built-in uniaxial anisotropy in a magnetic field B=0.4 T, resulting in an optical response that would be expected for highly symmetric QDs. For a comprehensive quantitative analysis the full heavy-hole exciton k.p-Hamiltonian is numerically calculated and the resulting optical polarization is modeled. The model is able to quantitatively describe all experimental results using a single set of parameters. From this model it is explicitly seen that a optical response characteristic for high symmetry QDs may be obtained from an ensemble of asymmetric QDs without a crossing of the zero-field bright exciton states, which was required for application of QDs in non-classical light sources. It is clearly demonstrated that any scheme using in-plane magnetic fields to symmetrize the optical response has to take into account at least four optically active states instead of the two observed in the absence of magnetic fields. These findings may explain some of the major disagreement on recent entanglement studies in asymmetric QDs, as models that do not take the above result into account cannot be a priori expected to provide reliable results on excitonic Bell states. KW - Quantenpunkt KW - Cadmiumselenid KW - Wide-gap-Halbleiter KW - Zinkselenid KW - Optische Anisotropie KW - Symmetrie KW - Optik KW - Austauschaufspaltung KW - optical polarization conversion Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-40683 ER -