TY - THES A1 - Obel, Kerstin T1 - Synthese und Charakterisierung partiell degradierbarer Hybridpolymere für biomedizinische Anwendungen T1 - Synthesis and Characterization of partially degradable hybrid polymers for biomedical applications N2 - Zur Züchtung von Gewebe außerhalb des Körpers wird ein struktureller und biologischer Ersatz für die natürliche Extrazelluläre Matrix (ECM) benötigt, der durch künstliche Gerüst-struk¬tu¬ren, sogenannte Scaffolds, realisiert wird. Aktuell werden einige natürliche und synthe-tische biodegradierbare Polymere als Scaffold¬materialien verwendet, die jedoch alle noch signifi¬kante Nachteile aufweisen, weshalb verstärkt an Alternativen geforscht wird. Das Ziel dieser Arbeit war daher, auf Basis klassischer anorganisch-organischer Hybridpolymere, neuartige biodegradierbare Hybridpolymere zu synthetisieren, die ebenfalls durch einfache Variationen in ihrem strukturellen Aufbau gezielt modifiziert werden können. In diesem Zusammen¬hang sind Untersuchungen zur Erstellung grundlegender Struktur-Eigenschafts-beziehungen dieser sogenannten partiell degradierbaren Hybridpolymere von besonderer Bedeutung und daher ein wesentlicher wissen¬schaft¬licher Grundbestandteil dieser Arbeit, um dementsprechend anwendungs¬bezo¬gene Eigen¬schaften wie beispielsweise das E-Modul und die Degradationsrate definiert einstellen zu können. N2 - In order to grow tissue outside of the body a structural and biological substitute for the natural extracellular matrix (ECM) is needed which can be realized by so-called scaffold structures. Currently some natural and synthetic biodegradable polymers are used as materials for these scaffolds, but all of them have significant disadvantages, which is why there is a strong need for alternative materials. Therefore, the objective of this work was to synthesize novel biodegradable hybrid polymers which can be varied in their structural setup by simple modifications using the material concept of conventional inorganic-organic hybrid polymers as a starting point. In this context the fundamental relations between the structure of these so-called partially degradable hybrid polymers and their properties are of outstanding importance and therefore form a further fundamental academic element of this work. Thus, it is possible to adjust use-oriented properties, i. e. the Young’s modulus and the degradation rate, as predefined by the specific application. KW - Metallorganische Polymere KW - Biologischer Abbau KW - Sol-Gel-Verfahren KW - anorganisch-organische Hybridpolymere KW - biodegradierbar KW - Scaffoldmaterialien KW - Implantate KW - Sol-Gel-Prozess KW - Hybridpolymere Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-124026 ER - TY - THES A1 - Lang, Katharina T1 - Synthese leitfähiger elastischer Materialkomposite durch Verwendung metallischer Nanodrähte T1 - Synthesis of conductive elastic material composites by using metallic nanowires N2 - Silbernanodrähte (AgNW) wurden in verschiedene Hybridpolymere und in eine als Referenz dienende Silikonzusammensetzung eingebaut. Durch Spincoating konnten transparente leitfähige Filme erhalten werden. Deren jeweilige Nanodrahtverteilung, thermische Aktivierung und visuelle Transparenz wurden charakterisiert. Die Perkolationsschwelle der Filme hängt dabei von der individuellen durchschnittlichen AgNW-Länge ab. Eine beträchtliche Leitfähigkeit wurde während des mechanischen Streckens bis zu 30 % aufrechterhalten. Mikrostrukturierte Hybridpolymer-Verbundfilme wurden durch UV-Lithographie erhalten. ... N2 - In the context of the present work, silver nanowires were successfully synthesized using a modified polyol process according to Sun et al.[43-45]. The reproducibility of the synthesis was increased by adjusting the reaction parameters. Silver nanowires with an average length of the of ~ 12 µm and diameters of around 50 nm were obtained. The investigations of the silver nanowires were carried out on an optical level, using LSM and SEM (Section 5.1 / Section 9). In this work silver nanowire batches of different lengths were used in the manufacture of composite systems with regard to compatibility. Correspondingly, the selected resin systems from chapter 5.2 with different polarities were introduced. ... KW - Verbundwerkstoff KW - Nanodraht KW - Polymere KW - Elastizität KW - Elastizität KW - Hybridpolymere KW - Komposit Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-248253 ER - TY - THES A1 - Kolb, Carina T1 - Neuartige ORMOCER®-basierte Materialsysteme und deren Formgebung mittels Digital Light Processing für hochwertige dentale Versorgungen T1 - Novel ORMOCER®-based material systems and their shaping by means of Digital Light Processing for high-quality dental restorations N2 - Im Rahmen der vorliegenden Dissertation wurden ORMOCER®-basierte Materialsysteme für dentale Versorgungen entwickelt, die additiv mittels Digital Light Processing (DLP) verarbeitbar sind und ein hochwertiges, auf die vorgesehene Zielanwendung abgestimmtes Eigenschaftsprofil besitzen. Zunächst wurden grundlegende Untersuchungen zum DLP-Druck des Harzsystems und einfachen Kompositen durchgeführt, um auftretende Herausforderungen zu identifizieren und die weitere Vorgehensweise festzulegen. Ausgehend davon konzentrierte sich die Arbeit neben der Vermeidung der klebrigen Sauerstoffinhibierungsschicht auf der Bauteiloberfläche einerseits darauf, die Maßhaltigkeit bei DLP-gedruckten Bauteilen mit überhängenden Strukturen zu steigern. Insbesondere wurde das Augenmerk hier auf die Verwendung von organischen Lichtabsorbern zur Realisierung von hochtransluzenten Harz-basierten Bauteilen gelegt. Andererseits lag ein weiterer Schwerpunkt der Arbeit auf der Entwicklung von DLP-druckbaren Kompositen mit hoher Transluzenz. Die dafür nötige Brechzahlanpassung von Harzsystem und Füllstoff wurde zum einen durch die Synthese neuer, höherbrechender Harzsysteme und zum anderen durch die Verwendung hochbrechender ZrO2-Nanopartikel realisiert. Die resultierenden hochtransluzenten Komposite wurden umfassend mechanisch charakterisiert sowie erfolgreich DLP-gedruckt. N2 - In this work, ORMOCER®-based material systems for dental restorations were developed which can be additively processed by digital light processing (DLP) and have a high-quality property profile tailored to the intended target application. Initially, basic investigations were carried out on the DLP printing of the resin system and simple composites in order to identify any challenges that arose and to determine the further course of action. Based on this, in addition to avoiding the sticky oxygen inhibition layer on the part surface, the work focused on the one hand on increasing the dimensional accuracy of DLP-printed parts with overhanging structures. In particular, attention was paid here to the use of organic light absorbers to realize highly translucent resin-based parts. On the other hand, another focus of the work was on the development of DLP printable composites with high translucency. The necessary refractive index adaption of resin system and filler was realized on the one hand by synthesizing new, higher refractive index resin systems and on the other hand by using highly refractive ZrO2 nanoparticles. The resulting highly translucent composites were extensively characterized mechanically and successfully DLP-printed. KW - Hybridpolymere KW - Additive Fertigung KW - Photopolymerisation KW - Komposit KW - Maßhaltigkeit KW - Digital Light Processing KW - Dimensionsgenauigkeit KW - ORMOCER® KW - Hohe Transluzenz Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259516 ER - TY - THES A1 - Klukowska, Anna T1 - Switching hybrid polymers with physically and covalently entrapped organic photochromes T1 - Schaltbare Hybridpolymere mit physikalisch eingebetteten und kovalent angebundenen organischen Photochromen N2 - The aim of this work was to test and tailor new sol gel derived hybrid polymer coatings for the incorporation of photochromic spirooxazines and chromenes. The development and optimisation of work was performed via two different routes (dye and matrix ones), that led to photochromic multi-layer coating systems with coloration depth and photostabilities comparable to commercially available products. Hybrid sol-gel derived polymers were found to be suitable host materials for photochromic dyes. Matrix properties and the type of entrapment heavily influence the photochromic activity, as well as the degradation rate and the kinetics of incorporated dyes. Dyes incorporated within more polar and rigid matrices were found to show slower kinetics and higher coloration but associated with faster photodegradation. On the other hand, hosts with less polar sites, low residual water concentration and low rigidity are preferable in terms of photostability. Significant differences were found for physically incorporated and covalently grafted chromophores. Using silylated dyes that can participate in the sol-gel process, the photodegradation rate of the whole system can be decreased as compared to the physically entrapped systems. The higher photostability and slower kinetics for covalently bonded photochromes is probably due to sterical hindrance. Addition of proper stabilisers increases the photostability: The employment of UV light stabilisers, excited state quenchers and HALS was found to be beneficial but not sufficient. Besides the presence of stabilisers, also the reduction of oxygen migration into the coating (by a hard top coat and an inorganic anti reflective coating) strongly increases stability of photochromes. Finally, it was found that the separation of photochromes within two (or more) different layers leads to a further improvement of the coloration and fatigue behaviour of the whole coating stack, presumably by preventing the contact of dye molecules with excited states of other molecules or their degradation products. These latter findings are considered to pave the way for stable photochromic coatings based on hybrid polymers. Future development should be directed towards more photostable yellow and red switching dyes. The results of the present investigations should help to choose the most suitable molecular environments for the tested photochromes in terms of photostability, kinetics and activity, which is considered relevant with respect to potential applications, in particular in the ophthalmic sector. Furthermore, the interesting combination of properties of this type of materials offers a large potential with regard to many applications, such as coatings for sunglasses, radiation protectors, filters, sunroofs, reversible markings, printing applications and smart textiles. N2 - Das Ziel dieser Arbeit war es, neue, über das Sol Gel Verfahren hergestellte Beschichtungsmaterialien zu entwickeln, die als Matrices für photochrome Spirooxazine und Chromene geeignet sind. Die Entwicklungs- und Optimierungsarbeit erfolgte über zwei Routen (Farbstoff- und Matrix-Rout) und führte zu komplexen photochromen Mehrschichtaufbauten, deren Einfärbungs und Photostabilitätseigenschaften mit kommerziell erhältlichen Produkten vergleichbar sind. Über das Sol-Gel Verfahren hergestellte hybride Polymere stellen geeignete Wirtsmaterialien für photochrome Farbstoffen dar. Die Eigenschaften der Matrix und die Einbauweise beeinflussen sowohl die photochrome Aktivität, als auch die Degradationsgeschwindigkeit und Kinetik der eingebauten Farbstoffe. Farbstoffe integriert in rigide Matrices höherer Polarität zeigen geringere Schaltgeschwindigkeit und stärkere Einfärbung, jedoch verknüpft mit höherer Degradationsgeschwindigkeit. Andererseits Matrixmaterialien mit eher unpolarem Charakter, niedriger Konzentration an Restwasser, und niedriger Rigidität sind zu bevorzugen, wenn gute Photostabilität erreicht werden soll. Wesentliche Unterschiede bestehen zwischen chemisch angebundenen und physikalisch eingebauten Farbstoffen. Durch den Einsatz von silylierten Farbstoffen, die am Sol Gel-Prozess partizipieren können, kann eine Verringerung der Photodegradationsgeschwindigkeit im Vergleich zu physikalisch eingebauten Farbstoffen erreicht werden. Höhere Photostabilität und langsamere Schaltkinetikt sind vermutlich auf sterische Hinderung zurückzuführen. Der Zusatz geeigneter Stabilisatoren erhöht die Photostabilität: Der Einsatz von UV Stabilisatoren, Excited State Quenchern und HALS ist vorteilhaft aber nicht ausreichend. Neben der Präsenz von Stabilisatoren, führt auch die Verringerung der Sauerstoffpermeation (durch eine harte Deckschicht und eine reflexionsmindernde PVD Beschichtung) zu einer Stabilitätserhöhung. Schließlich wurde gefunden, dass die räumliche Trennung der Farbstoffe in zwei (oder mehr) unabhängigen Schichten ebenfalls die Färbetiefe und Photoresistenz der Beschichtungen erhöhte, vermutlich dadurch, dass der Kontakt von Farbstoffmolekülen mit angeregten Zuständen anderer Moleküle oder ihren Degradationsprodukten verhindert oder zumindest eingeschränkt wird. Diese Befunde können den Weg für stabile photochrome Beschichtungen auf de Basis von Hybridpolymeren ebnen. Weiterer Optimierungsbedarf wird in den bisher erzielbaren Farbtönen gesehen. Zukünftige Entwicklungen sollten sich auf photostabilere gelb und rot schaltende Farbstoffe konzentrieren. Die Ergebnisse der vorgelegten Untersuchungen können bei der Auswahl der am besten geeigneten, molekularen Umgebung für erprobte Photochrome in Bezug auf Photostabilität, Kinetik und Aktivität helfen. Dies ist von großer Bedeutung im Hinblick auf mögliche Anwendung vor allem im ophthalmischen Bereich. Darüber hinaus bergen die interessante Eigenschaftskombinationen dieser Art von Materialien großes Potential für ein weites Feld möglicher Anwendungen (Sonnenbrillen, Strahlungsschutz, Filter, Sonnendächer, schaltbare Markierungen, Druck, Textilien). KW - Metallorganische Polymere KW - Sol-Gel-Verfahren KW - Spirooxazine KW - Photochrome Verbindungen KW - Photochromie KW - Sol-Gel KW - Hybridpolymere KW - Ophthalmik KW - Spirooxazine KW - photochromism KW - sol-gel KW - hybrid polymers KW - ophthalmic KW - spirooxazine Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-11721 ER -