TY - THES A1 - Ehbets, Julia T1 - (β-AMINOALKYL)Silane: Synthese und Hydrolyseuntersuchungen von Cα-, Cβ-, Cγ- UND Cζ-funktionalisierten Alkoxy(Aminoalkyl)Silanen T1 - (β-AMINOALKYL)Silanes: Synthesis and study of hydrolysis of Cα-, Cβ-, Cγ- UND Cζ-functionalized Alkoxy(Aminoalkyl)Silanes N2 - Die vorliegende Arbeit behandelt die Synthese sowie die Eigenschaften einer Serie von organofunktionellen α-, β-, γ- und ζ-Silanen, mit einem Fokus auf Alkoxy(aminoalkyl)silanen. Der Großteil dieser Modellstrukturen wurde anschließend hinsichtlich ihrer Hydrolysekinetik in Abhängigkeit der Art der funktionellen Gruppe X (NMe3+, N(H)COOMe, N(Me)COOMe, NH2, N(H)Me, NMe2, Pip, Me), des Abstandes des Substituenten X zu dem Silicium-Atom (α-, β-, γ- und ζ-Position), der Alkoxy-Abgangsgruppe am Silicium-Atom (MeO, iPrO, tBuO) und des pD-Wertes der Reaktionslösung systematisch untersucht. Eine große Herausforderung dieser Studie war die Synthese von β-Amino-funktionalisierten Alkoxysilanen, deren Chemie aufgrund ihrer Labilität bisher kaum erforscht ist. Die einzigen literaturbekannten Vertreter stellten bislang das Trialkoxysilan (EtO)3Si(CH2)2NH2 (1) und sein Dialkoxy-Derivat (EtO)2SiMe(CH2)2NH2 (2) dar, welche durch Reaktion des entsprechenden 2-(Chlorethyl)silans mit Ammoniak unter hohem Druck im Autoklaven zugänglich sind. Unter Verwendung dieser Synthesemethode konnte sowohl die Synthese der Silane 1 und 2 reproduziert, als auch das Trimethoxy-Analogon (MeO)3Si(CH2)2NH2 (3) erstmals dargestellt werden. Darüber hinaus wurde eine Serie von organofunktionellen Monoalkoxysilanen des Typs RORSiMe(CH2)2X und ROSiMe2C(H)MeCH2X (4b–18b) im präparativen Maßstab analyserein dargestellt. Des Weiteren wurden die entsprechenden α-Silane 8a, 11a, 14a und 15a, die γ-Silane 6c, 8c, 11c, 13c–15c und 18c sowie die ζ-Silane 19 und 20 erstmals dargestellt. Weiterhin wurden die bereits literaturbekannten α-Silane 16a–18a und γ-Silane 7c, 16c und 17c für die Verwendung in den Hydrolyseexperimenten synthetisiert. Die Charakterisierung aller im Rahmen dieser Arbeit synthetisierten Verbindungen erfolgte mittels NMR-Spektroskopie (1H-, 13C-, 15N- und 29Si-NMR) und Elementaranalysen (C, H, N) bzw. HRMS-Experimente. Die hydrolytische Spaltung der Si–OC-Bindung in Alkoxy(aminoalkyl)silanen stellt einen technisch sehr wichtigen Schlüsselschritt in der Synthese von Amino-funktionalisierten Polysiloxanen dar. Um den Mechanismus dieser Si–OC-Bindungsspaltung besser zu verstehen, wurden die Alkoxysilane 4b, 4c, 5b, 6b, 6c, 7b, 7c, 8a–8c, 9b, 11a–11c, 12b, 14a–14c, 15a–15c, 16a–16c, 17a–17c, 18a–18c, 19 und 20 hinsichtlich ihrer Hydrolysekinetik in CD3CN/D2O unter sauren und basischen Bedingungen mittels 1H-NMR-Spektroskopie untersucht. Die Ergebnisse dieser Struktur–Reaktivitäts-Studie zeigten, dass die beobachteten unterschiedlichen Hydrolysegeschwindigkeiten das Resultat mehrerer Faktoren sind, wie beispielsweise elektronische und sterische Effekte, der große Einflusses des pD-Wertes und auch intramolekulare N–H∙∙∙O-Wasserstoffbrückenbindungen zwischen der protonierten Amino-Gruppe und der Alkoxy-Abgangsgruppe. Da der Einfluss dieser Effekte auf die Reaktivität der untersuchten α-, β-, γ- und ζ-Silane sehr unterschiedlich ist, kann kein klarer Zusammenhang zwischen der Hydrolysereaktivität und der Positionierung der stickstoff-haltigen funktionellen Gruppe (α-, β-, γ- und ζ-Position) erkannt werden. Die jeweils beobachtete Reaktivität entspricht vielmehr einer Summe aller zuvor genannten Teileffekte. Die Erkenntnisse, die im Rahmen dieser Arbeit erhalten wurden, ermöglichen ein verbessertes grundlegendes Verständnis der Reaktivität von funktionalisierten α-, β-, γ- und ζ-Silanen, und sind für die Silicon-Industrie von großem Interesse, da sie eine gezieltere Anwendung der α-, β- und γ-Aminosilane in der Synthese von technisch wichtigen Amino-funktionalisierten Polysiloxanen erlauben. N2 - This thesis deals with the synthesis and properties of a series of organofunctional α-, β-, γ-, and ζ-silanes, with a focus on alkoxy(aminoalky)silanes. The majority of these model compounds were systematically investigated for their hydrolysis kinetics, depending on the functional group X (NMe3+, N(H)COOMe, N(Me)COOMe, NH2, N(H)Me, NMe2, Pip, Me), the spacer between X and the silicon atom (α-, β-, γ-, and ζ-position of the functional group), the alkoxy leaving group at the silicon atom (MeO, iPrO, tBuO), and the pD value of the reaction mixture. One of the major challenges of this study was the synthesis of β-amino-functionalized alkoxysilanes, the chemistry of which was mainly due to stability issues not well established yet. Until now, the trialkoxysilane (EtO)3Si(CH2)2NH2 (1) and its dialkoxyderivative (EtO)2SiMe(CH2)2NH2 (2) were the only representatives of this type described in the literature. They were synthesized by reaction of the respective 2-(chloroethyl)silane and ammonia under high pressure in an autoclave. Using this synthetic method, the synthesis of the silanes 1 und 2 could be reproduced and the trimethoxyanalogue (MeO)3Si(CH2)2NH2 (3) could be prepared for the first time. Furthermore, a series of organofunctional monoalkoxysilanes of the formula type RORSiMe(CH2)2X and ROSiMe2C(H)MeCH2X (4b–18b) was synthesized on a preparative scale in analytically pure form. Also, the corresponding α-silanes 8a, 11a, 14a, and 15a, the γ-silanes 6c, 8c, 11c, 13c–15c, and 18c, and the ζ-silanes 19 and 20 were prepared for the first time. In addition, the well known α-silanes 16a–18a and γ-silanes 7c, 16c, and 17c were synthesized for their use in the hydrolysis experiments. All the compounds synthesized in this study were characterized by NMR spectroscopy (1H, 13C, 15N, and 29Si NMR) and elemental analysis (C, H, N) or HRMS experiments. The hydrolytic cleavage of the Si–OC bond of alkoxy(aminoalkyl)silanes represents a technically very important key step in the synthesis of amino-functionalized polysiloxanes. To get a better understanding of the mechanism of this Si–OC bond cleavage, the alkoxysilanes 4b, 4c, 5b, 6b, 6c, 7b, 7c, 8a–8c, 9b, 11a–11c, 12b, 14a–14c, 15a–15c, 16a–16c, 17a–17c, 18a–18c, 19, and 20 were studied for their hydrolysis kinetics in CD3CN/D2O under acidic and basic conditions, using 1H NMR spectroscopy as the analytical tool. The results of these structure–reactivity studies clearly demonstrate that the different hydrolysis reactivities observed are the result of a number of parameters, such as electronic and steric effects, the strong impact of the pD value, and intramolecular N–H∙∙∙O hydrogen bonds between the protonated amino group and the alkoxy leaving group. These parameters affect the hydrolysis reactivity of the α-, β-, γ-, and ζ-silanes in an unpredictable manner, so that no clear correlation between the hydrolysis reactivity and the position of the nitrogen-containing functional group (α-, β-, γ-, and ζ-position) can be found. The observed reactivity is rather a summation of all the aformentioned parameters. The insight gained from this work allows for a much clearer conceptual understanding of the reactivity of functionalized α-, β-, γ-, and ζ-silanes. These findings are also of great interest for silicone industry as they allow for a more directed application of α-, β-, and γ-aminosilanes for the preparation of the technically important class of amino-functionalized polysiloxanes. KW - Hydrolyse KW - Reaktionskinetik KW - Silanderivate KW - Hydrolyse KW - hydrolysis KW - kinetische Untersuchung KW - organofunktionelle Alkoxysilane KW - kinetic study KW - organofunctionalized alkoxysilanes Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-133071 ER - TY - THES A1 - Hackl, Thomas T1 - A draft genome for the Venus flytrap, Dionaea muscipula : Evaluation of assembly strategies for a complex Genome – Development of novel approaches and bioinformatics solutions T1 - Ein Genom für die Venus Fliegenfalle, Dionaea muscipula N2 - The Venus flytrap, \textit{Dionaea muscipula}, with its carnivorous life-style and its highly specialized snap-traps has fascinated biologist since the days of Charles Darwin. The goal of the \textit{D. muscipula} genome project is to gain comprehensive insights into the genomic landscape of this remarkable plant. The genome of the diploid Venus flytrap with an estimated size between 2.6 Gbp to 3.0 Gbp is comparatively large and comprises more than 70 % of repetitive regions. Sequencing and assembly of genomes of this scale are even with state-of-the-art technology and software challenging. Initial sequencing and assembly of the genome was performed by the BGI (Beijing Genomics Institute) in 2011 resulting in a 3.7 Gbp draft assembly. I started my work with thorough assessment of the delivered assembly and data. My analysis showed that the BGI assembly is highly fragmented and at the same time artificially inflated due to overassembly of repetitive sequences. Furthermore, it only comprises about on third of the expected genes in full-length, rendering it inadequate for downstream analysis. In the following I sought to optimize the sequencing and assembly strategy to obtain an assembly of higher completeness and contiguity by improving data quality and assembly procedure and by developing tailored bioinformatics tools. Issues with technical biases and high levels of heterogeneity in the original data set were solved by sequencing additional short read libraries from high quality non-polymorphic DNA samples. To address contiguity and heterozygosity I examined numerous alternative assembly software packages and strategies and eventually identified ALLPATHS-LG as the most suited program for assembling the data at hand. Moreover, by utilizing digital normalization to reduce repetitive reads, I was able to substantially reduce computational demands while at the same time significantly increasing contiguity of the assembly. To improve repeat resolution and scaffolding, I started to explore the novel PacBio long read sequencing technology. Raw PacBio reads exhibit high error rates of 15 % impeding their use for assembly. To overcome this issue, I developed the PacBio hybrid correction pipeline proovread (Hackl et al., 2014). proovread uses high coverage Illumina read data in an iterative mapping-based consensus procedure to identify and remove errors present in raw PacBio reads. In terms of sensitivity and accuracy, proovread outperforms existing software. In contrast to other correction programs, which are incapable of handling data sets of the size of D. muscipula project, proovread’s flexible design allows for the efficient distribution of work load on high-performance computing clusters, thus enabling the correction of the Venus flytrap PacBio data set. Next to the assembly process itself, also the assessment of the large de novo draft assemblies, particularly with respect to coverage by available sequencing data, is difficult. While typical evaluation procedures rely on computationally extensive mapping approaches, I developed and implemented a set of tools that utilize k-mer coverage and derived values to efficiently compute coverage landscapes of large-scale assemblies and in addition allow for automated visualization of the of the obtained information in comprehensive plots. Using the developed tools to analyze preliminary assemblies and by combining my findings regarding optimizations of the assembly process, I was ultimately able to generate a high quality draft assembly for D. muscipula. I further refined the assembly by removal of redundant contigs resulting from separate assembly of heterozygous regions and additional scaffolding and gapclosing using corrected PacBio data. The final draft assembly comprises 86 × 10 3 scaffolds and has a total size of 1.45 Gbp. The difference to the estimated genomes size is well explained by collapsed repeats. At the same time, the assembly exhibits high fractions full-length gene models, corroborating the interpretation that the obtained draft assembly provides a complete and comprehensive reference for further exploration of the fascinating biology of the Venus flytrap. N2 - Die Venus Fliegenfalle, D. muscipula fasziniert aufgrund ihres karnivoren Lebensstil und ihrer hochspezialisierten Fallen Biologen schon seit der Zeit von Charles Darwins. Das Ziel des D. muscipula Genomprojekts ist es, neue Einblicke in den genomischen Grundlagen dieser besonderen Pflanze zu gewinnen. Die diploide Venus Fliegenfalle verfügt mit eine geschätzten Größe von 2.6 bp bis 3Gbp über ein vergleichsweise großes Genom, das zudem zu über 70% aus repetitiven Regionen besteht. Sequenzierung und Assembly von Genomen dieser Größenordnung stellen selbst mit neusten technischen und informatischen Methoden eine große Herausforderung dar. Zum ersten mal sequenziert und assembliert wurde das Genom 2011 durch das BGI (Beijing Genomics Institute). Meine Arbeit am Genom der Fliegenfalle begann mit der Analyse des 3.7Gbp großen Assemblies, welches wir vom BGI erhalten haben. Mit meinen Untersuchungen könnte ich zeigen, dass das Assembly stark fragmentiert und gleichzeitig durch überrepräsentierte repetitive Sequenzen stark aufgebläht ist. Darüberhinaus beinhaltet es gerade ein mal eine drittel der erwarteten Gene in Volllänge, wodurch es für die weiter Analyse ungeeignet ist. In meiner weiteren Arbeit habe ich mich daher darauf konzentriert, unsere Sequenzierungsund Assemblierungsstrategie zu verfeinern um ein stärker zusammenhängendes und vollständigeres Assembly zu erhalten. Dafür war es notwendig die Qualität der Sequenzierdaten so wie den Assemblierungsprozess selbst zu optimieren, und Programme zu entwickeln, die eine Verbesserung der Daten und eine Analyse der Zwischenergebnisse ermöglichen. So wurden etwa zur neue Bibliotheken von nicht-polymorphen DNA-Proben sequenziert um die Heterogenität im Datensatz zu verringern. Um die Kontinuität der Assemblies zu verbessern und Probleme mit der Heterozygosität der Daten zu lösen habe ich eine Reihe verschiedener Assemblierungsprogramme getestet. Dabei zeigte sich, dass das Programm ALLPATHS-LG am besten geeignet ist für die Assemblierung von D. muscipula Daten. Durch den Einsatz von digitaler Normalisierung konnte ich den Bedarf an Computerressourcen für einzelne Assemblierungen deutlich reduzieren und gleichzeitig die Kontinuität der Assemblies deutlich erhöhen. Zur besseren Auflösung repetitiver Strukturen im Genom, habe ich auf eine neu entwickelte Sequenziertechnologie von PacBio zurückgegriffen, die deutlich länger Sequenzen erzeugt. Um die neuen Daten trotz ihrer hohen Fehlerrate von 15% für Assemblierungen nutzen zu können, entwickelte ich das Korrekturprogramm proovread (Hackl et al., 2014). proovread nutzt kurze Illumina Sequenzen mit hoher Sequenziertiefe um innerhalb eines iterativen Prozess Fehler in PacBio Daten ausfindig zu machen und zu korrigieren. Das Programm erreicht dabei eine bessere Genauigkeit und eine höhere Sensitivität als vergleichbare Software. Darüber hinaus erlaubt sein flexibles Design auch Datensätze in der Größenordung des Fliegenfallengenoms effizient auf großen Rechenclustern zu bearbeiten. Neben dem Assemblierungsprozess an sich, stellt auch die Analyse von Assemblies großer Genome eine Herausforderung dar. Klassische Methoden basieren oft auf der rechenintensiven Berechnung von Alignments zwischen Sequenzierdaten und Assembly. Um vergleichbare Analysen deutlich schneller generieren zu können, habe ich Programme entwickelt die auf der Auswertung von k-mer Häufigkeiten beruhen, und die gewonnenen Ergebnisse in übersichtlichen Graphiken darstellen. Durch Kombination der so gewonnenen Einblicke und der verschiedenen Erkenntnisse bezüglich der Optimierung es Assemblierungsprozesses, war es mir am Ende möglich, ein Assembly von hoher Qualität für das Genom der Venus Fliegenfalle zu rekonstruieren. Dieses habe ich weiter verfeinert, unter anderem durch das Entfernen heterozygoter Sequenzen und durch das Flicken von Lücken mit Hilfe von PacBio Daten. Das so erstelle Assembly besteht aus 86 × 103 Sequenzen und hat eine Gesamtgröße von 1.45Gbp. Der Unterschied zur erwarteten Genomgröße lässt sich dabei gut durch kollabierte repetitive Regionen erklären. Gleichzeitig untermauert ein hoher Anteil an Volllängengenen im Assembly die Interpretation, dass das vorliegende Assembly eine vollständiges und umfassendes Abbild der D. muscipula Genom zeigt, und dass es sich damit als gute Grundlage für weitere Untersuchungen zur Biologie dieser faszinierenden Pflanze eignet. KW - Venusfliegenfalle KW - genome assembly KW - repeats KW - heterozygosity KW - pacbio correction KW - Genom Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-133149 ER - TY - THES A1 - Erle, Thorsten Michael T1 - A Grounded Approach to Psychological Perspective-Taking T1 - Ein verkörperter Erklärungsansatz für psychologische Perspektivenübernahme N2 - „Perspektivenübernahme“ bezeichnet die Fähigkeit des Menschen, sich in die Lage eines anderen hineinzuversetzen. In der psychologischen Forschung unterscheidet man drei Arten der Perspektivenübernahme, nämlich perzeptuelle (visuo-spatiale), affektive (Empathie) und kognitive (Theory of Mind). Die letztgenannten Arten der Perspektivenübernahme werden oft als „psychologische Perspektivenübernahme“ zusammengefasst. Diese Dissertation befasst sich mit der Frage, ob diese verschiedenen Arten der Perspektivenübernahme als theoretisch unterscheidbare Konstrukte oder lediglich als Facetten ein und desselben Konstrukts angesehen werden sollten. Die Befundlage in der psychologischen Fachliteratur ist diesbezüglich nicht eindeutig. Während einige Autoren Korrelationen zwischen verschiedenen Arten der Perspektivenübernahme für zu gering erachten, um ein einheitliches Konstrukt zu konstatieren, bewerten andere Autoren Korrelationen derselben Größe als Evidenz hierfür. Ein weniger arbiträres Vorgehen wäre es, experimentalpsychologisch zugrunde liegende Mechanismen zu identifizieren, die allen Arten der Perspektivenübernahme gemein sind, und zu untersuchen, ob eine Manipulation dieser Mechanismen abhängige Maße affektiver, kognitiver und perzeptueller Perspektivenübernahme gleichermaßen beeinflusst. Diesem Ansatz folgend macht die vorliegende Arbeit die Annahme, dass die mentale Selbstrotation des Körperschemas in die Position einer anderen Person, der zentrale Mechanismus visuo-spatialer Perspektivenübernahme, ein gemeinsamer Mechanismus aller Arten der Perspektivenübernahme ist. Entgegen früherer Ansätze wird diese Einheit somit nicht nur über die zentrale gemeinsame Funktionalität aller Arten von Perspektivenübernahme, also dem Verlassen des egozentrischen Referenzrahmens zugunsten einer (visuellen, affektiven oder kognitiven) Fremdperspektive, gerechtfertigt, sondern mit der Annahme eines gemeinsamen zugrundeliegenden Mechanismus. Daraus wird die einfache Hypothese abgeleitet, dass visuo-spatiale Perspektivenübernahme zu psychologischen Konsequenzen führen kann. Dies wurde in 6 Experimenten getestet. In diesen Experimenten mussten die Probanden zunächst immer die visuelle Perspektive einer anderen Person einnehmen. Hierzu sahen die Probanden eine Person, die mit zwei Objekten an einem Tisch sitzt. In jedem Durchgang mussten die Probanden sich entscheiden, mit welcher Hand diese Person eines der beiden Objekte greifen würde. Dabei wurde die Position der Zielperson so manipuliert, dass sie in der Hälfte der Fälle im selben visuo-spatialen Referenzrahmen wie der Proband saß, was Perspektivenübernahme zur Lösung der Aufgabe obsolet machte, während sie sich in den verbleibenden Durchgängen in einem anderen visuo-spatialen Referenzrahmen befand, so dass die Probanden die visuelle Perspektive der Zielperson übernehmen mussten um die Aufgabe korrekt zu lösen. Nach jedem Durchgang wurde dem Ziel dieser visuo-spatialen Aufgabe eine psychologische Eigenschaft zugeschrieben. Dies geschah im Rahmen eines abgewandelten Paradigmas zur Untersuchung der Ankerheuristik. Hierzu wurde den Probanden nach jedem Durchgang der visuo-spatialen Aufgabe eine Schätzfrage gestellt. Zeitgleich wurde die Antwort des Ziels bekannt gegeben. Entsprechend der Haupthypothese, dass visuo-spatiale Perspektivenübernahme psychologische Konsequenzen erzeugen kann, konnte gezeigt werden, dass die Probanden nach visuo-spatialer Perspektivenübernahme in höherem Maße die Gedanken der Zielperson übernahmen. Dies konnte sowohl anhand der absoluten Größe des Ankereffekts, als auch anhand der Differenz zwischen den Urteilen der Probanden und der Zielperson, gezeigt werden. Weitere Experimente schlossen Stichprobeneigenschaften, die verwendeten Stimuli oder die Aufgabenschwierigkeit als Alternativerklärungen für diese Effekte aus. Die beiden letzten Experimente zeigten zudem, dass dieser Effekt spezifisch für alle Konstellationen ist, in denen eine mentale Selbstrotation in die Zielperspektive notwendig war und dass die Übernahme fremder Gedanken mit einem Gefühl von Ähnlichkeit assoziiert war. Zusammengenommen unterstützen die Ergebnisse dieser Arbeit die theoretisch abgeleitete Sicht eines einheitlichen Perspektivenübernahme-Konstrukts und grenzen dieses zusätzlich von verwandten Konstrukten ab. In der abschließenden Diskussion werden die Bedeutung dieser Befunde für die Forschung in den Bereichen Empathie, Theory of Mind, und Perspektivenübernahme und ebenfalls praktische Implikationen der Ergebnisse aufgezeigt. N2 - „Perspective-taking“ is the ability to put yourself into the place of somebody else. Psychological research distinguishes three kinds of perspective-taking, namely, perceptual (visuo-spatial), affective (empathy), and cognitive (theory of mind) perspective-taking. The last two kinds of perspective-taking are often summarized as “psychological perspective-taking”. This dissertation tackles the question of whether these three kinds of perspective-taking should be conceptualized as independent constructs or as facets of one and the same construct. Prior research findings concerning this are equivocal. While some authors consider correlations between the different kinds of perspective-taking as too low for a unitary construct, others interpret correlations of the same magnitude as evidence for this. A less arbitrary way of deciding this would be to identify common mechanisms that underlie all kinds of perspective-taking and to examine whether manipulating these mechanisms in psychological experiments affects measures of perceptual, affective, and cognitive perspective-taking in parallel. In accordance with this reasoning, the present dissertation assumes that the mental self-rotation of the body schema into the physical location of another person, the main mechanism of perceptual perspective-taking, is a common mechanism of all kinds of perspective-taking. Thus, contrary to previous research a unitary construct is not only justified on the grounds of a common central functionality of all kinds of perspective-taking, that is, overcoming one’s egocentrism in favor of an alternative (perceptual, affective or cognitive) point of view, but additionally on the grounds of a common psychological mechanism. From this, the simple hypothesis that inducing visuo-spatial perspective-taking also leads to psychological consequences is derived. This hypothesis was tested in 6 experiments. In these experiments, participants first had to adopt the visual perspective of another person. To this end, they saw a person sitting at a table with two objects. During every trial, participants had to decide which hand the person would have to use in order to grab one of the two objects. Furthermore, the angular disparity between the participant and the target was manipulated in such a way that during half of the trials the target person was within the same visuo-spatial reference frame as the participant and thus no perspective-taking was necessary to solve the task correctly. During the remaining trials, the target person was sitting in another visuo-spatial reference frame so that the participants had to engage in perspective-taking to solve the task correctly. After every such trial, the target person was imbued with a mental state. This was done using an adapted paradigm for the investigation of the anchoring heuristic. Specifically, participants were asked to answer a trivia question and also saw what the target person from the visuo-spatial perspective-taking task was guessing. In line with the hypothesis that visuo-spatial perspective-taking leads to psychological outcomes, too, it was found that participants adopted the thoughts of the target person more strongly after visuo-spatial perspective-taking. This was evident in the absolute size of the anchoring effect, as well as the differences between participant and target estimations. Further experiments ruled out sample and stimulus characteristics and task difficulty as alternative explanations for these effects. The last two experiments furthermore established that the effects were specific to constellations where an embodied self-rotation into the target’s perspective was necessary and that the adoption of the target’s thoughts was associated with feelings of similarity. Taken together, these findings support the theoretically elaborated unitary view of perspective-taking and furthermore distinguish this construct from other related phenomena. In the general discussion, the significance of these findings for research on empathy, theory of mind, and perspective-taking, as well as practical implications are discussed. KW - Perspektivenübernahme KW - Empathie KW - Theory of Mind KW - Embodiment Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-143247 ER - TY - THES A1 - Schulz, Robert Frank T1 - A radio view of high-energy emitting AGNs T1 - Eine radioastronomische Betrachtung von hochenergetisch emittierenden AGNs N2 - The most energetic versions of active galactic nuclei (AGNs) feature two highly-relativistic plasma outflows, so-called jets, that are created in the vicinity of the central supermassive black hole and evolve in opposite directions. In blazars, which dominate the extragalactic gamma-ray sky, the jets are aligned close to the observer's line of sight leading to strong relativistic beaming effects of the jet emission. Radio observations especially using very long baseline interferometry (VLBI) provide the best way to gain direct information on the intrinsic properties of jets down to sub-parsec scales, close to their formation region. In this thesis, I focus on the properties of three AGNs, IC 310, PKS 2004-447, and 3C 111 that belong to the small non-blazar population of gamma-ray-loud AGNs. In these kinds of AGNs, the jets are less strongly aligned with respect to the observer than in blazars. I study them in detail with a variety of radio astronomical instruments with respect to their high-energy emission and in the context of the large samples in the monitoring programmes MOJAVE and TANAMI. My analysis of radio interferometric observations and flux density monitoring data reveal very different characteristics of the jet emission in these sources. The work presented in this thesis illustrates the diversity of the radio properties of gamma-ray-loud AGNs that do not belong to the dominating class of blazars. N2 - Die energetischsten Versionen von aktiven Galaxienkernen (AGNs) weisen zwei hoch-relativistische Plasmaausflüsse, sogenannte Jets auf, welche in der Nähe des zentralen supermassiven schwarzen Lochs entstehen und sich in entgegengesetzte Richtungen ausbreiten. In Blazaren, die die extragalaktische Gamma-Strahlung dominieren, sind diese Jets nahe zur Sichtlinie des Beobachters orientiert, das zu starkem relativistischen Beaming der Jetemission führt. Radiobeobachtungen vor allem mit Very Long Baseline Interferometry (VLBI) bieten die beste Möglichkeit direkt Informationen über die intrinsischen Eigenschaften von Jets in der Nähe ihrer Entstehungsregion auf sub-parsec Skalen zu sammeln. Der Fokus dieser Dissertation liegt auf den Eigenschaften von drei AGNs, IC 310, PKS 2004-447, and 3C 111, die zur kleinen Population von gamma-lauten AGNs abseits von Blazaren gehören. Diese Jets weisen einen etwas größeren Winkel zur Sichtlinie des Beobachters auf als Blazare. Ich untersuche diese AGNs im Detail mit Hilfe verschiedener radioastronomischer Instrumente in Bezug auf deren hochenergetischer Emission und im Vergleich der großen Samples der Langzeitbeobachtungsprogramme MOJAVE und TANAMI. Meine Analyse von Radiointerferometrie-Beobachtungen und Flussdichte-Messungen zeigen sehr unterschiedliche Eigenschaften der Jets. Damit verdeutlicht diese Arbeit anschaulich die vielfältigen Radioeigenschaften von gamma-lauten AGNs, die nicht zur dominierenden Klasse von Blazaren gehören. KW - Aktiver galaktischer Kern KW - Radioastronomie KW - Very long baseline interferometry KW - High-energy emission KW - Astrophysical Jet KW - Active galactic nucleus KW - Radio astronomy Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137358 ER - TY - THES A1 - Baur, Ramona T1 - Adult Attention-Deficit/Hyperactivity Disorder (ADHD), Emotion Processing, and Emotion Regulation in Virtual Reality T1 - Aufmerksamkeitsdefizit-/Hyperaktivitätsstörung (ADHS) im Erwachsenenalter, Emotionsverarbeitung und Emotionsregulation in virtueller Realität N2 - Attention-Deficit/Hyperactivity Disorder (ADHD) is characterized by symptoms of inattentiveness and hyperactivity/impulsivity. Besides, increasing evidence points to ADHD patients showing emotional dysfunctions and concomitant problems in social life. However, systematic research on emotional dysfunctions in ADHD is still rare, and to date most studies lack conceptual differentiation between emotion processing and emotion regulation. The aim of this thesis was to systematically investigate emotion processing and emotion regulation in adult ADHD in a virtual reality paradigm implementing social interaction. Emotional reactions were assessed on experiential, physiological, and behavioral levels. Experiment 1 was conducted to develop a virtual penalty kicking paradigm implying social feedback and to test it in a healthy sample. This paradigm should then be applied in ADHD patients later on. Pleasant and unpleasant trials in this paradigm consisted of hits respectively misses and subsequent feedback from a virtual coach. In neutral trials, participants were teleported to different spots of the virtual stadium. Results indicated increased positive affectivity (higher valence and arousal ratings, higher zygomaticus activations, and higher expression rates of positive emotional behavior) in response to pleasant compared to neutral trials. Reactions to unpleasant trials were contradictory, indicating increased levels of both positive and negative affectivity, compared to neutral trials. Unpleasant vs. neutral trials revealed lower valence ratings, higher arousal ratings, higher zygomaticus activations, slightly lower corrugator activations, and higher expression rates of both positive and negative emotional behavior. The intensity of emotional reactions correlated with experienced presence in the virtual reality. To better understand the impact of hits or misses per se vs. hits or misses with coach feedback healthy participants’ emotional reactions, only 50% of all shots were followed by coach feedback in experiment 2. Neutral trials consisted of shots over the free soccer field which were followed by coach feedback in 50 % of all trials. Shots and feedback evoked more extreme valence and arousal ratings, higher zygomaticus activations, lower corrugator activations, and higher skin conductance responses than shots alone across emotional conditions. Again, results speak for the induction of positive emotions in pleasant trials whereas the induction of negative emotions in unpleasant trials seems ambiguous. Technical improvements of the virtual reality were reflected in higher presence ratings than in experiment 1. Experiment 3 investigated emotional reactions of adult ADHD patients and healthy controls after emotion processing and response-focused emotion regulation. Participants successively went through an ostensible online ball-tossing game (cyber ball) inducing negative emotions, and an adapted version of the virtual penalty kicking game. Throughout cyber ball, participants were included or ostracized by two other players in different experimental blocks. Participants were instructed to explicitly show, not regulate, or hide their emotions in different experimental blocks. Results provided some evidence for deficient processing of positive emotions in ADHD. Patients reported slightly lower positive affect than controls during cyber ball, gave lower valence ratings than controls in response to pleasant penalty kicking trials, and showed lower zygomaticus activations than controls especially during penalty kicking. Patients in comparison with controls showed slightly increased processing of unpleasant events during cyber ball (higher ratings of negative affect, especially in response to ostracism), but not during penalty kicking. Patients showed lower baseline skin conductance levels than controls, and impaired skin conductance modulations. Compared to controls, patients showed slight over-expression of positive as well as negative emotional behavior. Emotion regulation analyses revealed no major difficulties of ADHD vs. controls in altering their emotional reactions through deliberate response modulation. Moreover, patients reported to habitually apply adaptive emotion regulation strategies even more frequently than controls. The analyses of genetic high-risk vs. low-risk groups for ADHD across the whole sample revealed similar results as analyses for patients vs. controls for zygomaticus modulations during emotion processing, and for modulations of emotional reactions due to emotion regulation. To sum up, the virtual penalty kicking paradigm proved to be successful for the induction of positive, but not negative emotions. The importance of presence in virtual reality for the intensity of induced emotions could be replicated. ADHD patients showed impaired processing of primarily positive emotions. Aberrations in negative emotional responding were less clear and need further investigation. Results point to adult ADHD in comparison to healthy controls suffering from baseline deficits in autonomic arousal and deficits in arousal modulation. Deficits of ADHD in the deliberate application of response-focused emotion regulation could not be found. N2 - Die Aufmerksamkeitsdefizit-/hyperaktivitätsstörung (ADHS) ist gekennzeichnet durch Symptome der Unaufmerksamkeit und Hyperaktivität/Impulsivität. Zudem sprechen zunehmende Befunde für emotionale Defizite und damit einhergehende soziale Probleme bei ADHS. Bisher gibt es jedoch kaum systematische Untersuchungen zu emotionalen Defiziten bei ADHS, und die meisten bisherigen Studien trennen nicht klar zwischen den Konzepten der Emotionsverarbeitung und Emotionsregulation. Das Ziel dieser Arbeit war es, Emotionsverarbeitung und Emotionsregulation bei erwachsenen ADHS Patienten in einem Paradigma in virtueller Realität mit sozialer Interaktion zu untersuchen. Emotionale Reaktionen wurden auf Erlebnisebene, physiologischer Ebene und Verhaltensebene erfasst. In Experiment 1 wurde ein virtuelles Elfmeterparadigma mit sozialem Feedback entwickelt und an einer gesunden Stichprobe getestet. Dieses Paradigma sollte später mit ADHS Patienten verwendet werden. Angenehme und unangenehme Versuchsdurchgänge bestanden aus Treffern bzw. gehaltenen Torschüssen und einer darauffolgenden Rückmeldung von einem virtuellen Trainer. In neutralen Durchgängen wurden die Teilnehmer zu verschiedenen Punkten im virtuellen Stadion teleportiert. Die Ergebnisse sprechen für erhöhte positive Affektivität (höhere Valenz- und Arousalratings, höhere Zygomaticusaktivität, mehr positiver emotionaler Ausdruck) durch angenehme im Vergleich zu neutralen Durchgängen. Reaktionen auf unangenehme im Vergleich zu neutralen Durchgängen waren widersprüchlich und sprechen für erhöhte positive und negative Affektivität. Unangenehme vs. neutrale Durchgänge führten zu niedrigeren Valenzratings, höheren Arousalratings, höherer Zygomaticusaktivität, etwas niedrigerer Corrugatoraktivität und mehr positivem und negativem emotionalen Ausdruck. Die Intensität emotionaler Reaktionen korrelierte mit dem Präsenzerleben in der virtuellen Realität. Um den Einfluss von Torschüssen allein vs. Torschüssen mit Trainerrückmeldung auf emotionale Reaktionen bei Gesunden besser zu verstehen, folgte in Experiment 2 nur auf 50 % aller Schüsse eine Trainerrückmeldung. Neutrale Durchgänge bestanden aus freien Schüssen über das Fußballfeld, auf die zu 50 % eine Trainerrückmeldung folgte. Schüsse mit Rückmeldung führten durchgängig zu stärkeren Valenz- und Arousalratings, höherer Zygomaticusaktivität, niedrigerer Corrugatoraktivität, und höheren Hautleitfähigkeits- reaktionen als Schüsse allein. Auch diese Ergebnisse sprechen für die Induktion positiver Emotionen durch angenehme Durchgänge, während die Induktion negativer Emotionen durch unangenehme Durchgänge uneindeutig scheint. Technische Verbesserungen der virtuellen Realität schlugen sich in höherem Präsenzerleben als in Experiment 1 nieder. Experiment 3 untersuchte emotionale Reaktionen von erwachsenen ADHS Patienten und gesunden Kontrollen nach Emotionsverarbeitung und reaktionsfokussierter Emotions- regulation. Versuchsteilnehmer absolvierten nacheinander ein vorgebliches Online-Ballspiel (Cyber Ball) welches negative Emotionen induzierte, und eine weiterentwickelte Version des virtuellen Elfmeterspiels. Während Cyber Ball wurden die Teilnehmer von zwei anderen Mitspielern in verschiedenen Versuchsblöcken entweder eingeschlossen oder ausgeschossen. Die Teilnehmer wurden in verschiedenen Versuchsblöcken instruiert, ihre Emotionen entweder deutlich zu zeigen, nicht zu regulieren, oder zu verbergen. Einige Ergebnisse sprechen für eine defizitäre Verarbeitung positiver Emotionen bei ADHS. Patienten berichteten niedrigeren positiven Affekt als Kontrollen während Cyber Ball, niedrigere Valenzratings als Kontrollen nach angenehmen Elfmeterdurchgängen, und zeigten niedrigere Zygomaticusaktivität als Kontrollen insbesondere während des Elfmeterschießens. Im Vergleich zu Kontrollen zeigten Patienten eine leicht verstärkte Verarbeitung von unangenehmen Ereignissen beim Cyber Ball (höhere Ratings von negativem Affekt v.a. nach Ausschluss), aber nicht beim Elfmeterschießen. Patienten zeigten eine niedrigere Baseline- Hautleitfähigkeit als Kontrollen, sowie beeinträchtigte Hautleitfähigkeitsmodulationen. Im Vergleich zu Kontrollen zeigten Patienten leicht erhöhten Ausdruck von positiven und negativen Emotionen. Emotionsregulationsanalysen zeigten keine bedeutenden Einschränkungen von ADHS vs. Kontrollen im Verändern ihrer emotionalen Reaktionen durch absichtliche reaktionsfokussierte Emotionsregulation. Außerdem gaben Patienten an, gewohnheitsmäßig sogar häufiger als Kontrollen adaptive Emotionsregulationsstrategien anzuwenden. Der Vergleich einer genetischen Hochrisikogruppe mit einer Niedrigrisikogruppe für ADHS über die gesamte Stichprobe zeigte ähnliche Ergebnisse wie die Analysen für Patienten vs. Kontrollen in der Modulation von Zygomaticusaktivität während der Emotionsverarbeitung, sowie in der Modulation emotionaler Reaktionen durch Emotionsregulation. Zusammenfassend lässt sich sagen, dass das virtuelle Elfmeterparadigma geeignet scheint, um positive, aber nicht negative Emotionen zu induzieren. Die Bedeutsamkeit von Präsenzerleben in einer virtuellen Realität für die Intensität von induzierten Emotionen konnte repliziert werden. ADHS Patienten zeigten Beeinträchtigungen v.a. in der Verarbeitung von positiven Emotionen. Abweichungen in der negativen emotionalen Reagibilität waren weniger eindeutig und sollten weiter untersucht werden. Die Ergebnisse deuten darauf hin, dass erwachsene ADHS Patienten im Vergleich zu gesunden Kontrollen eine niedrigere autonome Erregbarkeit bei Baseline und Defizite in der Erregbarkeitsmodulation zeigen. Es zeigten sich keine Defizite von ADHS in der absichtlichen Anwendung von ausdrucksfokussierter Emotionsregulation. KW - emotion processing KW - Emotionsverarbeitung KW - Emotionsregulation KW - ADHS KW - virtuelle Realität KW - virtual reality KW - adult ADHD KW - emotion regulation KW - Aufmerksamkeitsdefizit-Syndrom KW - Erwachsener KW - Gefühl Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142064 ER - TY - THES A1 - Jagiellowicz-Kaufmann, Monika Sarah T1 - Akzeptable und effektive Pedal- und Motorkennlinien zur Unterstützung von Eco-Driving im Elektrofahrzeug T1 - Usable and effective pedal and engine characteristics for supporting eco-driving in electric vehicles N2 - Die begrenzte Reichweite ist einer der Hauptgründe für das derzeitige mangelnde Kaufinteresse an Elektrofahrzeugen. Neben rein komponentenoptimierenden Maßnahmen, wie der Verbesserung der Batterie, ist die Förderung von Eco-Driving, also einer energieeffizienten Fahrweise, ein effektiver Ansatz zur Steigerung der Reichweite. Trainings und visuell dargebotene Eco-Assistenten können Eco-Driving wirksam steigern, schöpfen aber nicht dessen gesamtes Potential aus. Angepasste Pedal- und Motorkennlinien könnten Eco-Driving zusätzlich fördern. Für deren Bewertung sind die Wirksamkeit und Akzeptanz bisher nicht gemeinsam berücksichtig worden oder sie wurden nicht im Elektrofahrzeug evaluiert und validiert. Zu diesen Anpassungen zählen eine Veränderung des Beschleunigungspedals, sodass mit diesem gleichzeitig beschleunigt und rekuperiert werden kann, die Limitierung von Drehmoment und Leistung und der Einsatz eines aktiven Beschleunigungspedals, welches Widerstände abhängig von Fahrzeug- oder Situationsparametern aktiviert. Für diese Arbeit habe ich daher die Pedal- und Motorkennlinien entsprechend angepasst und in ein validiertes Elektroautomodell implementiert. Ziel war es, verschiedene Fahrverhaltensbereiche im Elektrofahrzeug, die Eco-Driving kennzeichnen (energieoptimales Beschleunigen und Verzögern, Einhalten von Geschwindigkeitsbegrenzungen, vorausschauendes Fahren), benutzerfreundlich, akzeptabel und wirksam zu unterstützen. Zu diesem Zweck habe ich vier Probandenstudien im bewegten Fahrsimulator durchgeführt und geeignete Pedal- und Motorkennlinien empirisch bestimmt. In der ersten Studie habe ich untersucht, ob und warum eine Pedalkennlinie zu bevorzugen ist, bei der mit dem Beschleunigungspedal anstelle des Bremspedals rekuperiert wird. Das Ziel der zweiten Studie war es, eine geeignete Rekuperationsstärke für ein kombiniertes Beschleunigungspedal, bei dem mit dem Beschleunigungspedal rekuperiert wird, zu bestimmen. In der dritten Studie habe ich evaluiert, ob die Limitierung der Leistung oder die des Drehmoments zu bevorzugen ist, um das Beschleunigungsverhalten zu optimieren und wie stark die Limitierungen optimaler Weise sein sollten. Basierend auf den Ergebnissen der dritten Studie, habe ich schließlich einen optimierten Limitierungsansatz konzipiert, diesen mit einem aktiven Beschleunigungspedal verglichen und bestimmt, welcher Ansatz zu bevorzugen ist. Aufgrund der Studienergebnisse werden folgende Ansätze für die jeweiligen Eco-Driving-Fahrverhaltensbereiche empfohlen und es werden folgende Gestaltungsempfehlungen abgeleitet: Zur Förderung eines energieeffizienten Beschleunigungsverhaltens ist die Limitierung von Drehmoment und Leistung geeignet. Die Limitierung des Drehmoments ist hierbei besonders wirksam in geringen, die Limitierung der maximalen Leistung in höheren Geschwindigkeitsbereichen. Zu empfehlen sind parallele mittelstarke Limitierungen von maximalem Drehmoment und maximaler Leistung, die Beschleunigungen mit 2.0 m/s² erlauben, bei gleichzeitiger Bereitstellung eines Kick-Downs. Ein aktives Beschleunigungspedal ist insbesondere aus Gründen der Benutzerfreundlichkeit zur Förderung eines energieeffizienten Beschleunigungsverhaltens nur eingeschränkt empfehlenswert. Zur Förderung eines energieeffizienten Verzögerungsverhaltens wird die Implementierung der Rekuperationsfunktion auf dem Beschleunigungspedal anstelle des Bremspedals empfohlen, da dies einerseits ermöglicht, auf hydraulisches Bremsen zu verzichten und gleichzeitig mehr Energie rekuperiert werden kann. Ersteres trägt zu einer hohen Akzeptanz bei, letzteres zu einer günstigen Energiebilanz. Besonders effektiv und akzeptabel ist ein kombiniertes Fahrbremspedal, wenn es eine starke Rekuperation ermöglicht (zwischen -1.7 und -2.1 m/s²). Weiterhin ist ein aktives Beschleunigungspedal, das den geeigneten Zeitpunkt für eine maximal energieeffiziente Verzögerung mit einem kombinierten Fahrbremspedal anzeigt, wirksam, um die rekuperierte Energie zu steigern. Auf diese Weise kann zudem eine vorausschauende Fahrweise unterstützt werden. Hierbei muss jedoch die Funktionalität und Benutzerfreundlichkeit optimiert werden, um eine gesteigerte kognitive Fahrerbeanspruchung und Minderungen der Akzeptanz zu vermeiden. Zur Unterstützung der Einhaltung von Geschwindigkeitsbegrenzungen ist ebenfalls das aktive Beschleunigungspedal geeignet. Der Fahrer sollte hierbei aber die Möglichkeit haben, individuell Grenzwerte einzustellen. Die Verknüpfung eines kombinierten Fahrbremspedals mit einer Limitierung von Drehmoment und Leistung sowie einem aktiven Beschleunigungspedal kann abschließend, unter Berücksichtigung der abgeleiteten Gestaltungsempfehlungen, als effektive und akzeptable Möglichkeit zur Förderung unterschiedlicher Verhaltensbereiche von Eco-Driving bewertet werden. Die erwarteten Synergieeffekte der evaluierten Ansätze in Verbindung mit Eco-Trainings und visuell dargebotenen Eco-Feedback-Assistenten sowie deren Langfristigkeit sollten Gegenstand weiterführender Forschung sein. N2 - The limited range of electric vehicles (EV) is one of the major reasons for the current lack of buying interest. Besides optimizing battery capacity, eco-driving is an effective approach for extending EVs range. Trainings and visually presented assistance systems are effective but do max out the full potential of eco-driving. Yet, adapting accelerator pedal and motor characteristics may additionally support eco-driving. So far, these adaptations were not evaluated concerning both usability and effectiveness simultaneously, however, or they were not evaluated and validated in the context of EVs. The adaptations of interest are first a combination of accelerator and brake pedal, which allows accelerating and regenerative braking by means of only one pedal, second limitations of engine’s maximum torque or power and third an active accelerator pedal which activates forces depending on vehicle or situation parameters. Within the scope of this thesis, I therefore adapted accelerator pedal and motor characteristics respectively and implemented them in a validated electric vehicle model. The aim was to support several eco-driving characteristics (energy efficient accelerating and decelerating, compliance with speed limits, anticipatory driving) in a usable and effective manner. In order to determine suitable accelerator pedal and motor characteristics I thus conducted four experiments in a dynamic simulator. In the first study I evaluated whether recuperating by means of the accelerator or the brake pedal is preferred. The aim of the second study was to determine an appropriate recuperation force when using a combined accelerator pedal which allows recuperating by means of the accelerator pedal. In the third study I evaluated on the one hand whether a limitation of engines torque or power is preferred in order to support energy efficient acceleration and on the other hand how intense limitations should be. Based on the findings of the third study I finally optimized the limitation approach, compared this approach with an active accelerator pedal and evaluated which approach is preferred. Based on the study results, I recommend following adaptations for the respective eco-driving characteristics and derive further design implications: Limiting maximum torque and power is most appropriate for supporting energy efficient acceleration behavior. The limitation of maximum torque is most effective at lower speed range, the limitation of maximum power at higher speed range. I recommend limitating maximum torque and power simultaneously, however, allowing accelerations of 2.0 m/s² and proving a kick-down which deactivates the limitations. Though an active accelerator pedal is effective for supporting energy efficient acceleration behavior it is not recommended for usability reasons. For supporting energy efficient deceleration behavior the implementation of regenerative braking on the accelerator pedal instead of the braking pedal is recommended as it enables dispensing with hydraulic braking on the one hand and increases regenerated energy on the other hand. The former contributes to a high level of acceptance, the latter to a favorable energy balance. In particular strong regenerative braking (between -1.7 and -2.1 m/s²), when using a combined pedal solution, is effective and usable. Furthermore, an active accelerator pedal, which indicates the appropriate time for a maximum energy efficient deceleration with a combined pedal solution, is effective to increase regenerated energy. By this means, also an anticipatory driving style is supported. Nevertheless, accuracy of function and its usability need to be optimized in order to avoid increasing driver workload and decreasing acceptance. Furthermore, an active accelerator pedal is also applicable for supporting compliance with speed limits. However, the possibility of individual customizing of thresholds should be provided. Finally, taking into account the design recommendations, a combination of a combined pedal solution, limitation of maximum torque and power and an active accelerator pedal is a usable and effective approach for supporting various eco-driving characteristics. The expected synergy effects of the evaluated approaches in combination with eco-trainings and visually presented eco-feedback assistance system as well as their long-term effectiveness should be subject of further research. KW - Elektrofahrzeug KW - Energieeinsparung KW - Akzeptanz KW - eco-driving KW - active accelerator pedal KW - Elektrofahrzeug KW - electric vehicle KW - acceptance KW - usability KW - Kennlinie KW - efficiency KW - eco mode KW - regenerative braking KW - Fahrsimulator KW - Effektivität Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137031 ER - TY - THES A1 - Mattern, Felix T1 - Alterungsbedingte Effekte auf DNA-Methylierungsprofile entwicklungsrelevanter Gene in Eizellen und Embryonen am Modellorganismus Bos taurus T1 - Aging-induced effects on DNA methylation profiles of developmental genes in oocytes and embryos on the model organism Bos taurus N2 - Die postovulatorische Alterung sowie die ovarielle Alterung konnten bei der Anwendung assistierter Reproduktionstechniken (ARTs) als entscheidende Faktoren identifiziert werden, die den Reproduktionserfolg nachhaltig beeinträchtigen. Die postovulatorische Alterung tritt ein, sobald die reife Eizelle nicht mehr innerhalb ihres physiologischen Zeitfensters befruchtet wird. Die ovarielle Alterung beschreibt hingegen die Abnahme des Follikel-Vorrats mit zunehmendem Alter des weiblichen Individuums bzw. des Ovars. Sowohl die postovulatorische Alterung als auch die ovarielle Alterung führen u.a. zu einer reduzierten Oozytenqualität und einer geringeren Blastozystenrate. Die Zielsetzung dieser Arbeit bestand darin, den Einfluss der postovulatorischen Alterung und der ovariellen Alterung im Holstein-Rind (Bos taurus) auf die DNA-Methylierung entwicklungsrelevanter Gene in Eizellen und Embryonen zu untersuchen. Aus Schlachthof-Ovarien wurden Antralfollikeln unterschiedlicher Größe (<2 mm, 3-5 mm und >6 mm) isoliert. Eizellen aus Follikeln der Größe 3-5 mm wurden für 24h (physiologisch) und 48h (gealtert) in vitro gereift (IVM). Die gereiften Oozyten wurden anschließend in vitro fertilisiert und Embryonen im 4-6 Zellstadium generiert. Sowohl in den unreifen Eizellen aus Antralfollikeln unterschiedlicher Größe als auch in den gereiften Oozyten und den Embryonen wurde die Promotormethylierung der Gene bH19, bSNRPN, bZAR1, bDNMT3A, bOCT4, bDNMT3Lo und bDNMT3Ls analysiert. Zur Untersuchung der ovariellen Alterung wurden mittelgroßen Antralfollikel aus Ovarien lebender Rinder (in vivo) unterschiedlichen Alters (9-12 Monate, 3-7 Jahre und 8-11 Jahre) gewonnen. In den daraus isolierten unreifen Eizellen wurde die DNA-Methylierung der Promotorregionen der Gene bTERF2, bREC8, bBCL-XL, bPISD, bBUB1, bDNMT3Lo, bH19 und bSNRPN bestimmt. Als Methode zur Analyse der Promotormethylierung wurde die Limiting Dilution Bisulfit-Sequenzierung angewendet. In unreifen Eizellen aus Antralfollikeln unterschiedlicher Größe (<2 mm, 3-5 mm und >6 mm) konnte ein erhöhtes Auftreten abnormal methylierter Allele in den geprägten Genen bH19 und bSNRPN von Eizellen kleiner Follikel (<2 mm) identifiziert werden. Dieses Ergebnis könnte eine mögliche Ursache einer bereits bekannten und mehrfach beschriebenen geringeren Entwicklungskompetenz von Eizellen kleiner Follikel (<2 mm) auf epigenetischer Ebene darstellen. Die verlängerte Reifungsdauer der IVM-Eizellen hatte eine signifikante Hypermethylierung in der Promotorregion des Gens DNMT3Lo von 48h-gereiften Eizellen zur Folge. Beim Übergang von 48h-gereiften Eizellen zum Embryo konnte eine signifikante Hypomethylierung von CpG7 des stammzellspezifischen Transkripts DNMT3Ls beobachtet werden. Diese CpG-Stelle wies ebenfalls einen signifikanten Anstieg von CpGs mit nicht-eindeutigem Methylierungszustand in unreifen Eizellen mit steigender Follikelgröße auf. Da sich die CpG-Position innerhalb eines Sequenz-Motivs einer Bindungsstelle des Transkriptionsfaktors CREB befindet, könnten die Methylierungsdaten auf eine Interaktion zwischen dem Transkriptionsfaktor CREB und der DNA-Methylierung während der Entwicklung und Reifung der Eizelle sowie der Transition von der Eizelle zum Embryo hindeuten. Die DNA-Methylierungsprofile der untersuchten Gene in unreifen Eizellen aus Kühen unterschiedlichen Alters (9-12 Monate, 3-7 Jahre und 8-11 Jahre) wiesen keine signifikanten Unterschiede zwischen den Altersgruppen auf. Die ovarielle Alterung bei Rindern zwischen 9 Monaten und 11 Jahren zeigte damit keinen Effekt auf die DNA-Methylierung der untersuchten Promotorregionen der Gene bTERF2, bREC8, bBCL-XL, bPISD, bBUB1, bDNMT3Lo, bH19 und bSNRPN. Nach einer simulierten postovulatorischen Alterung durch eine in vitro Reifung für 48h konnte eine Veränderung der DNA-Methylierung der Oozyten-spezifischen (DNMT3Lo) und Stammzell-spezifischen (DNMT3Ls) Promotoren des katalytisch inaktiven Cofaktors von DNMT3A, DNMT3L, beobachtet werden. Die veränderte DNA-Methylierung von DNMT3Ls tritt dabei erst im frühen Embryo in Erscheinung und interagiert vermutlich mit dem Transkriptionsfaktor CREB. Die Veränderungen von DNMT3Lo in Eizellen und DNMT3Ls in den daraus generierten Embryonen lässt vermuten, dass es sich hierbei um eine dynamische Anpassung des Embryos auf äußere Umweltbedingungen der Eizelle über die Methylierung der DNA handelt. N2 - Postovulatory aging and ovarian aging have been identified as key factors in assisted reproductive techniques (ARTs) and have a lasting effect on reproductive success. Postovulatory aging occurs if the mature egg is not fertilized within its physiological time window. On the other hand, ovarian aging describes the decrease in the follicular reserve with increasing age of the female or the ovary, respectively. Both post-ovulatory aging and ovarian aging result in reduced oocyte quality and lower blastocyst rate. The aim of this thesis was to explore the effects of postovulatory aging and ovarian aging in Holstein cattle (Bos taurus) on the DNA methylation of developmentally important genes in oocytes and embryos. Antral follicles of different sizes (<2 mm, 3-5 mm and> 6 mm) were isolated from slaughterhouse ovaries. Female germ cells from middle-sized follicles (3-5 mm) were matured for 24h (physiological conditions) and 48h (aged conditions) in vitro (IVM). The IVM- oocytes were subsequently fertilized in vitro and embryos at the 4-6 cell stage were generated. Promoter methylation of the genes bH19, bSNRPN, bZAR1, bDNMT3A, bOCT4, bDNMT3Lo and bDNMT3Ls was analysed in immature oocytes from antral follicles of different sizes as well as in matured oocytes and the respective embryos. For studying ovarian aging, middle-sized antral follicles were obtained in vivo from animals of different age groups (9-12 months, 3-7 years and 8-11 years). In the extracted immature gametes, the DNA methylation of the promoter regions of bTERF2, bREC8, bBCL-XL, bPISD, bBUB1, bDNMT3Lo, bH19 and bSNRPN was examined. The limiting dilution bisulfite (pyro)sequencing method was applied to determine the promoter methylation of the candidate genes at the single allele level. In immature oocytes from antral follicles of different diameters (<2 mm, 3-5 mm and> 6 mm) an increased occurrence of abnormally methylated alleles of the imprinted genes bH19 and bSNRPN was identified in small follicles (<2 mm). This failure to establish imprinting could be a possible cause of a well-known reduced developmental potential of small follicles (<2 mm) at the epigenetic level. The extended maturation time of the IVM-oocytes resulted in a significant hypermethylation in the promoter region of DNMT3Lo in 48h matured oocytes. After transition from 48h matured oocytes to embryos, a significant hypomethylation of CpG7 of the stem cell specific transcript DNMT3Ls was detected. The same CpG site showed a significant increase of CpGs with unclear methylation state in immature female germ cells with increasing follicular size. This CpG position is located within a potential binding site of the transcription factor CREB. Thus, the methylation data indicates an interaction between the transcription factor CREB and the DNA methylation during development and maturation of oocytes as well as during transition from the oocyte to the embryo. The DNA methylation profiles of the analysed genes in immature oocytes from cows of different age (9-12 months, 3-7 years and 8-11 years) showed no significant differences between age groups. Hence, the ovarian aging in cattle between 9 months and 11 years caused no effect on the DNA methylation of bTERF2, bREC8, bBCL-XL, bPISD, bBUB1, bDNMT3Lo, bH19 and bSNRPN. After a simulated postovulatory aging by in vitro maturation for 48h, a change in the DNA methylation of the oocyte-specific (DNMT3Lo) and stem cell-specific (DNMT3Ls) promoters of the catalytically inactive DNA-methyltransferase DNMT3L was observed. The altered DNA methylation of DNMT3Ls occurs in the early embryo and probably interacts with the transcription factor CREB. The changes of DNMT3Lo in oocytes and DNMT3Ls in the resulting embryos might represent a dynamic adaptation to external environmental conditions. KW - Oozyte KW - Epigenetik KW - Altern KW - DNS-Methyltransferase KW - Ovarielle Alterung KW - Postovulatorische Alterung KW - Antralfollikel KW - Holstein Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-144562 ER - TY - THES A1 - Gradmann, Rena T1 - Analysis of Historical Islamic Glazes and the Development of a Substitution Material T1 - Analyse historischer Islamischer Glasuren und die Entwicklung eines Restaurierungsmaterials N2 - 11 Conclusion 11.1 Glaze compositions Glazes from tiles of imposing Islamic buildings and some tableware glazes of the medieval epoch in Central Asia, the Middle East, Asia Minor, and North Africa are analysed regarding their main composition and colouring agents. Three major production recipes can be distinguished, i.e. alkali glazes, alkali lead glazes, and lead glazes. In the work of Tite (2011), Islamic glazes from Egypt, Iran, Iraq, and Syria are subdivided into four groups of composition, being partly consistent with those of this work. The alkali lime glazes with <2 wt% PbO correspond to the alkali glazes, but with higher content of CaO. The second and third group of low lead alkali and lead alkali glazes (2-10 wt% PbO and 10-35 wt% PbO) can be subsumed to the alkali lead group described here. Tite´s high lead group has PbO contents >35 wt% and is comparable to the lead glazes (>30 wt% PbO) of this study. The lead and the alkali oxides serve as a flux for the lowering the melting point. In the interaction of ceramic body and glaze, primarily an influence from Si, Al, and K is observed in the line scans from the cross section of ceramic and glaze. However, the input of ceramic material doesn’t seem to be critical for the classification of glazes according to their alkali and alkali lead compositions. In every epoch and locality, except of the Ilkhanate dynasty in Iran, lead glaze samples can be verified. This is also observed in previous investigations e.g. from medieval Iraq, Jordan and Iran (McCarthy, 1996; Al-Saad, 2002; Holakooei et al., 2014). In the Moroccan and Bulgarian glazes, lead seems to be the only important flux. In part, the lead flux is supplemented by additional alkali contents. The lack of alkali and alkali lead glazes in Bulgarian and Moroccan glazes (assuming that the Ottoman alkali lead glazes are imported tableware) seems to affect the regions with Roman-influenced history and with geographical distance to the Near East alkali flux tradition. For the alkali lead glazes and alkali glazes, the overall characteristic is sodium dominated, although the absolute soda values are in part surprisingly low. Samples from Bukhara, Takht-i-Suleiman and the Turkish localities have the highest, but still moderate Na2O values up to 15 wt%, compared to other analyses from e.g. India (Gill & Rehren, 2011). The source of the alkali flux is either mineral natron or plant ash. The source can be determined regarding the MgO values, limited to 1.3 wt% in mineral natron and exceeding 2.0 wt% in the case of plant ashes. In the samples of the present study, the K2O component is not suitable for the indication of the flux-relevant alkali source due to its broad scattering. The P2O5 contents are also enhanced in the plant ash compositions but the data set is not sufficient for statistical evaluation. An influence of the ceramic body on the glaze composition is observed only for SiO2, Al2O3, and K2O in quartz frit ceramics with slight K-feldspar content. The earliest Uzbek tableware glazes from the 10th-11th century (Seljuq period) were generally produced using a lead flux. The same applies to part of the Uzbek tile glazes which were produced between the 13th and 16th century. In Iran, glazes from the 12th century (Khwarezmid period) are lead glazes, but also alkali-fluxed glazes with mineral natron characteristics can be found. Although the production of lead-rich glazes was established from the 8th-9th century on in Iraq, Syria, and Egypt (Henshaw, 2010; Tite et al., 2011), alkali glazes are found in almost all regions except of Bulgaria and Morocco. Plant ash-fluxed alkali glazes are found in 13th century glazes from Takht-i-Suleiman. The plant ash flux technology is assumed to be continuously used in Mesopotamia, Iran, and Central Asia (Sayre & Smith, 1974; Henderson, 2009), but it could be shown that a parallel use of mineral natron parallel existed in the alkali glaze production from the 12th-15th century from Uzbekistan to Afghanistan. Mineral natron characteristics are also reported by Mason (2004) for Syrian and Iranian alkali glazes on lustre ware of the 8th-14th century. Tile glazes with partly mineral natron compositions are found in the Mughal architectural glazes from the 14th- 17th century from India (Gill et al., 2014). Alkali and alkali lead tile glazes from Samarkand from the 13th century (Mongolian period) have mineral natron flux characteristics, but samples from the 15th century (Timurid period) show plant ash signature. Alkali fluxed Uzbek glazes from Bukhara from the 16th century (Sheibanid dynasty) are also made by plant ash flux and are subdivided into two groups with high and low sodium oxide content. The Afghan alkali glazes have sodium oxide contents similar to the sodium-poor Uzbek subgroup, which points to a possible exchange of glaze makers or glaze making technology from Uzbekistan and Afghanistan in the 15th-17th century. Regarding the extensive exchange of Timurid craftsmen in Central Asia, this option seems to be even more likely (Golombek, 1996). One sample from the 15th century from Afghanistan with mineral natron reveals that this material was parallel used in these centuries. Concerning the colouring of the glazes, it has to be distinguished between pigments and colouring ions which are incorporated in the glassy matrix. The colouring agents for translucent glazes are cations of various transition metals. As ions, Co2+ (blue), Cu2+ (green in a lead rich matrix), Fe3+ (brown/black), Mn4+ (brown/black) and Mn3+ (violet) are determined by EPMA. For opaque yellow, white, and turquoise glazes, different pigments were used. The crystalline pigments are investigated by a µ XRD2 device with the result of SnO2, SiO2, and PbSiO4 as whitening agents. PbSiO4 and Pb2Sn2O6 are found in the yellow glaze, from which only the lead tin oxide causes the yellow colour. In the black glazes, different Cr-rich pigments, Cu-Cr-Mn-oxides and iron containing clinopyroxenes are found, even in samples of the same period and region. Cr-rich particles are also detected in two turquoise Afghan glazes from the 15th and 16th century. The use of the ions of Fe, Cu, Co, Cr, and Mn seems to be widely common in the Islamic glazes and corresponds to the described colouring agents in e.g. the study of Tite (2011). The use of opacifying SnO2 particles is widespread as it is reported from different Islamic glazes from Iraq, Iran, Egypt, and Syria (Henshaw, 2010; O´Kane, 2011; Tite, 2011). The colouring agents are known already from former, e.g. Egyptian, Roman and pre-islamic periods, but especially SnO2 pigments became increasingly widespread in the Islamic glazing tradition. The use of yellow and black pigments instead varies already within the buildings from Bukhara from Cr crystals and clino-pyroxenes in the mosque Khoja Zainuddin to a Cu-Cr-Mn-oxide in the madrassa Mir-i Arab of the same epoch. Regarding the matrix compositions connected with the colouring, a certain assignment within the different locations and epochs can be seen. It is noticeable that e.g. the content of lead in turquoise glazes in Uzbekistan is in the range of 0.0-9.2 wt% Pb, whereas blue glazes are mostly alkali ones with PbO contents <2.0 wt%. The turquoise glazes show, that this restriction is not influenced by any defaults of availability and processability. The assumption of common addition of lead and tin to the glaze, which is already described for Iranian glazes of the 13th century (Allan et al., 1973) cannot be confirmed by correlations of tin and lead oxide in the compositions. 11.2 Portable XRF measurement With the p-XRF, semi-quantitative information about the major element compositions is generated. The depth of the detectable signals depends on the analysed sample setup. The p-XRF data are collected with the XL3 Hybrid device of the company Analyticon Instruments. In the comparison of p-XRF results of the “mining” program from Uzbek glazes with EPMA results, the same major composition groups can be distinguished. The Moroccan glazes, all lead rich, are measured with the “mining” as well as with the “soil” program, revealing a better performance in the “mining” measurements. The deviations are nevertheless high, because of the high lead contents, which make the calculation of matrix correction difficult. The measurement of the colouring oxides MnO2, CoO, and CuO is satisfying with the internal calibration of the device and even improved with the “mining” program measurement, if compared to the results of the “soil” program. The measurements of glaze imitations lead to better results than that of bulk glass. This can be attributed to the smoother surface texture. In spite of the accuracy limits in the measurements of particular elements in glazes, the classification of flux composition into three groups could be confirmed with the p XRF analysis. The measurement precision is therefore sufficient for the semi-quantitative analysis of the flux characteristic of glazes. Especially for the on-site measurement of large sample quantities on historical buildings, the device is a suitable tool. 11.3 Restoration material The ORMOCER® fulfils the requirements of stability, reversibility, and transparency, which are imposed to a modern restoration material. As pigments, historically coloured glass, cobalt blue, Egyptian blue, lead tin yellow, manganese violet, iron oxide, copper oxide, and cassiterite were used. The metal compounds have higher colour intensities than the pigments of coloured glass. It has to be considered that the proportion of ORMOCER® in the batch must be high enough (70 vol%) to guarantee the ORMOCER® properties of weathering and mechanical stability. The adhesion properties of the ORMOCER® and the homogeneity of the mixture are the best in a fraction of max. 30 vol% particles per ORMOCER®. With integrated particles, the ORMOCER® G materials show homogeneous coatings, whereas the particles in the ORMCOER® E show more agglomeration. In the sedimentation and weathering experiments, the use of an ultrasonic finger in combination with a roller mill is favourable compared to the treatment with bead grinding mill. The treatments with ultrasonic finger and roller mill result in less sedimentation and better adhesion of the dispersions. The treatment of the dispersions in the bead grinding mill does not result in sufficient adhesion, certainly due to the sedimentation behaviour and a congregation of particles on the bottom of the coating. The modification of dispersed nano-particles by 3-methacryl-oxypropyltrimethoxysilan leads to a further homogenization in the sedimentation tests. It is therefore approved for the use in coloured glaze supplements. In weathered coatings of nano-particle compounds, the surface modification shows certainly no enhancement of stability. The treatment of pigmented coatings with an additional layer of pure ORMOCER® results in a bright and transparent appearing, which is closer to the original optical appearance of the glaze. A long-time test application on a historical building will be the next step to validate the suitability of the restoration material. N2 - Analyse historischer Islamischer Glasuren und die Entwicklung eines Restaurierungsmaterials KW - Glasur KW - Islamische Staaten KW - Restaurierung KW - Keramik KW - Werkstoff KW - Islamic glazes KW - archaeometry KW - colouring agents KW - Restoration material KW - portable XRF KW - Islamische Kunst KW - Farbgebung KW - Archäometrie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136233 ER - TY - THES A1 - Kindermann, Philipp T1 - Angular Schematization in Graph Drawing N2 - Graphs are a frequently used tool to model relationships among entities. A graph is a binary relation between objects, that is, it consists of a set of objects (vertices) and a set of pairs of objects (edges). Networks are common examples of modeling data as a graph. For example, relationships between persons in a social network, or network links between computers in a telecommunication network can be represented by a graph. The clearest way to illustrate the modeled data is to visualize the graphs. The field of Graph Drawing deals with the problem of finding algorithms to automatically generate graph visualizations. The task is to find a "good" drawing, which can be measured by different criteria such as number of crossings between edges or the used area. In this thesis, we study Angular Schematization in Graph Drawing. By this, we mean drawings with large angles (for example, between the edges at common vertices or at crossing points). The thesis consists of three parts. First, we deal with the placement of boxes. Boxes are axis-parallel rectangles that can, for example, contain text. They can be placed on a map to label important sites, or can be used to describe semantic relationships between words in a word network. In the second part of the thesis, we consider graph drawings visually guide the viewer. These drawings generally induce large angles between edges that meet at a vertex. Furthermore, the edges are drawn crossing-free and in a way that makes them easy to follow for the human eye. The third and final part is devoted to crossings with large angles. In drawings with crossings, it is important to have large angles between edges at their crossing point, preferably right angles. N2 - Graphen sind häufig verwendete Werkzeuge zur Modellierung von Zusammenhängen zwischen Daten. Ein Graph ist eine binäre Relation zwischen Objekten, das heißt er besteht aus einer Menge von Objekten (Knoten) und einer Menge von Paaren von Objekten (Kanten). Netzwerke sind übliche Beispiele für das Modellieren von Daten als ein Graph. Beispielsweise lassen sich Beziehungen zwischen Personen in einem sozialen Netzwerk oder Netzanbindungen zwischen Computern in einem Telekommunikationsnetz als Graph darstellen. Die modellierten Daten können am anschaulichsten dargestellt werden, indem man die Graphen visualisiert. Der Bereich des Graphenzeichnens behandelt das Problem, Algorithmen zum automatischen Erzeugen von Graphenvisualisierungen zu finden. Das Ziel ist es, eine "gute" Zeichnung zu finden, was durch unterschiedliche Kriterien gemessen werden kann; zum Beispiel durch die Anzahl der Kreuzungen zwischen Kanten oder durch den Platzverbrauch. In dieser Arbeit beschäftigen wir uns mit Winkelschematisierung im Graphenzeichnen. Darunter verstehen wir Zeichnungen, in denen die Winkel (zum Beispiel zwischen Kanten an einem gemeinsamen Knoten oder einem Kreuzungspunkt) möglichst groß gestaltet sind. Die Arbeit besteht aus drei Teilen. Im ersten Teil betrachten wir die Platzierung von Boxen. Boxen sind achsenparallele Rechtecke, die zum Beispiel Text enthalten. Sie können beispielsweise auf einer Karte platziert werden, um wichtige Standorte zu beschriften, oder benutzt werden, um semantische Beziehungen zwischen Wörtern in einem Wortnetzwerk darzustellen. Im zweiten Teil der Arbeit untersuchen wir Graphenzeichnungen, die den Betrachter visuell führen. Im Allgemeinen haben diese Zeichnungen große Winkel zwischen Kanten, die sich in einem Knoten treffen. Außerdem werden die Verbindungen kreuzungsfrei und so gezeichnet, dass es dem menschlichen Auge leicht fällt, ihnen zu folgen. Im dritten und letzten Teil geht es um Kreuzungen mit großen Winkeln. In Zeichnungen mit Kreuzungen ist es wichtig, dass die Winkel zwischen Kanten an Kreuzungspunkten groß sind, vorzugsweise rechtwinklig. KW - graph drawing KW - angular schematization KW - boundary labeling KW - contact representation KW - word clouds KW - monotone drawing KW - smooth orthogonal drawing KW - simultaneous embedding KW - right angle crossing KW - independent crossing KW - Graphenzeichnen KW - Winkel KW - Kreuzung KW - v Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112549 SN - 978-3-95826-020-7 (print) SN - 978-3-95826-021-4 (online) PB - Würzburg University Press CY - Würzburg ER - TY - THES A1 - Schnücke, Gero T1 - Arbitrary Lagrangian-Eulerian Discontinous Galerkin methods for nonlinear time-dependent first order partial differential equations T1 - Arbitrary Lagrangian-Eulerian Discontinous Galerkin-Methode für nichtlineare zeitabhängige partielle Differentialgleichungen erster Ordnung N2 - The present thesis considers the development and analysis of arbitrary Lagrangian-Eulerian discontinuous Galerkin (ALE-DG) methods with time-dependent approximation spaces for conservation laws and the Hamilton-Jacobi equations. Fundamentals about conservation laws, Hamilton-Jacobi equations and discontinuous Galerkin methods are presented. In particular, issues in the development of discontinuous Galerkin (DG) methods for the Hamilton-Jacobi equations are discussed. The development of the ALE-DG methods based on the assumption that the distribution of the grid points is explicitly given for an upcoming time level. This assumption allows to construct a time-dependent local affine linear mapping to a reference cell and a time-dependent finite element test function space. In addition, a version of Reynolds’ transport theorem can be proven. For the fully-discrete ALE-DG method for nonlinear scalar conservation laws the geometric conservation law and a local maximum principle are proven. Furthermore, conditions for slope limiters are stated. These conditions ensure the total variation stability of the method. In addition, entropy stability is discussed. For the corresponding semi-discrete ALE-DG method, error estimates are proven. If a piecewise $\mathcal{P}^{k}$ polynomial approximation space is used on the reference cell, the sub-optimal $\left(k+\frac{1}{2}\right)$ convergence for monotone fuxes and the optimal $(k+1)$ convergence for an upwind flux are proven in the $\mathrm{L}^{2}$-norm. The capability of the method is shown by numerical examples for nonlinear conservation laws. Likewise, for the semi-discrete ALE-DG method for nonlinear Hamilton-Jacobi equations, error estimates are proven. In the one dimensional case the optimal $\left(k+1\right)$ convergence and in the two dimensional case the sub-optimal $\left(k+\frac{1}{2}\right)$ convergence are proven in the $\mathrm{L}^{2}$-norm, if a piecewise $\mathcal{P}^{k}$ polynomial approximation space is used on the reference cell. For the fullydiscrete method, the geometric conservation is proven and for the piecewise constant forward Euler step the convergence of the method to the unique physical relevant solution is discussed. N2 - Die vorliegende Arbeit beschäftigt sich mit der Entwicklung und Analyse von arbitrar Lagrangian-Eulerian discontinuous Galerkin (ALE-DG) Methoden mit zeitabhängigen Testfunktionen Räumen für Erhaltungs- und Hamilton-Jacobi Gleichungen. Grundlagen über Erhaltungsgleichungen, Hamilton-Jacobi Gleichungen und discontinuous Galerkin Methoden werden präsentiert. Insbesondere werden Probleme bei der Entwicklung von discontinuous Galerkin Methoden für die Hamilton-Jacobi Gleichungen untersucht. Die Entwicklung der ALE-DG Methode basiert auf der Annahme, dass die Verteilung der Gitterpunkte zu einem kommenden Zeitpunkt explizit gegeben ist. Diese Annahme ermöglicht die Konstruktion einer zeitabhängigen lokal affin-linearen Abbildung auf eine Referenzzelle und eines zeitabhängigen Testfunktionen Raums. Zusätzlich kann eine Version des Reynolds’schen Transportsatzes gezeigt werden. Für die vollständig diskretisierte ALE-DG Methode für nichtlineare Erhaltungsgleichungen werden der geometrischen Erhaltungssatz und ein lokales Maximumprinzip bewiesen. Des Weiteren werden Bedingungen für Limiter angegeben. Diese Bedingungen sichern die Stabilität der Methode im Sinne der totalen Variation. Zusätzlich wird die Entropie-Stabilität der Methode diskutiert. Für die zugehörige semi-diskretisierte ALE-DG Methode werden Fehlerabschätzungen gezeigt. Wenn auf der Referenzzelle ein Testfunktionen Raum, der stückweise Polynome vom Grad $k$ enthält verwendet wird, kann für einen monotonen Fluss die suboptimale Konvergenzordnung $\left(k+\frac{1}{2}\right)$ und für einen upwind Fluss die optimale Konvergenzordnung $\left(k+1\right)$ in der $\mathrm{L}^{2}$-Norm gezeigt werden. Die Leistungsfähigkeit der Methode wird anhand numerischer Beispiele für nichtlineare Erhaltungsgleichungen untersucht. Ebenso werden für die semi-diskretisierte ALE-DG Methode für nichtlineare Hamilton-Jacobi Gleichungen Fehlerabschätzungen gezeigt. Wenn auf der Referenzzelle ein Testfunktionen Raum, der stückweise Polynome vom Grad k enthält verwendet wird, kann im eindimensionalen Fall die optimale Konvergenzordnung $\left(k+1\right)$ und im zweidimensionalen Fall die suboptimale Konvergenzordnung $\left(k+\frac{1}{2}\right)$ in der $\mathrm{L}^{2}$-Norm gezeigt werden. Für die vollständig diskretisierte ALE-DG Methode werden der geometrischen Erhaltungssatz bewiesen und für die stückweise konstante explizite Euler Diskretisierung wird die Konvergenz gegen die eindeutige physikalisch relevante Lösung diskutiert. KW - Galerkin-Methode KW - Numerische Strömungssimulation KW - Kontinuitätsgleichung KW - Hamilton-Jacobi-Differentialgleichung KW - Arbitrary Lagrangian-Eulerian KW - Discontinuous Galerkin method KW - Moving mesh method KW - conservation law Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-139579 N1 - zu dieser Arbeit gibt es einen Artikel, der in "Mathematics of Computation" veröffentlicht wurde unter folgendem Link: http://dx.doi.org/10.1090/mcom/3126 ER -