TY - THES A1 - Güthlein, Frank T1 - Übergangsmetallkatalysierte Synthese von Diboranen(4) T1 - Transition Metal catalyzed Synthesis of Diboranes(4) N2 - Die Diborane(4) Bis(catecholato)diboran und Bis(pinakolato)diboran können durch homogene und heterogene Katalysatoren durch eine Dehydrokupplungsreaktion ausgehend von Catecholboran und Pinakolboran dargestellt werden. Der effizienteste Katalysator für diese Reaktion ist Platin auf Aluminiumoxid, wobei Umsatzzahlen von maximal 11600 und Umsatzfrequenzen von 444 1/h erreicht werden. N2 - The diboranes(4) bis(catecholato)diborane and bis(pinacolato)diborane are synthesized under homogeneous and heterogeneous catalytic conditions starting from catecholborane and pinacolborane via a dehydrocoupling reaction. The most efficient catalyst is platinum on alumina, affording a maximum turnover number of 11600 and a maximum turnover frequency of 444 1/h. KW - Heterogene Katalyse KW - Homogene Katalyse KW - Diborane KW - Bis(catecholato)diboran KW - Bis(pinakolato)diboran KW - Diboran(4) KW - Catalysis KW - Diborane(4) Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71013 ER - TY - THES A1 - Bauer, Florian T1 - Untersuchungen zur Diborierung ungesättigter Systeme mit [2]Borametalloarenophanen T1 - Studies on the Diboration of unsaturated Systems with [2]Borametalloarenophanes N2 - Im Rahmen dieser Arbeit wurde die Übergangsmetall-katalysierte Diborierung verschiedener ungesättigter Substrate untersucht. Die Diborierung von Dialkinen ermöglichte die Synthese einer Reihe neuer Verbindungen, welche sich in drei Gruppen einteilen lassen: i) Einkernige [4]Diboradicarbaferrocenophane, die zusätzlich entweder direkt oder über einen Spacer eine CC Dreifachbindung tragen; ii) zweikernige Komplexe, bei denen das [4]Ferrocenophanfragment über die zweite CC Dreifachbindung an ein niedervalentes Platinfragment koordiniert ist und iii) zweikernige Bis [4]diboradicarbaferrocenophane durch die Diborierung beider Dreifachbindungen des Dialkins. Von den vier Vertreter von Gruppe i) ist bei zweien die zweite CC Dreifachbindung direkt an die Bis(boryl)alkeneinheit gebunden, während bei den anderen eine Spacergruppe vorhanden ist. Die Darstellung der Komplexe kann entweder durch katalytische Diborierung der Dialkine durch [Fe{C5H4B(NMe2)}2] oder durch direkte Umsetzung mit [Fe{C5H4B(NMe2)}2Pt(PEt3)2] erfolgen. Hingegen führt die Umsetzung von [Fe{C5H4B(NMe2)}2Pt(PEt3)2] mit äquimolaren Mengen Dialkin zur Bildung der zweiten Verbindungen von Gruppe ii). Hier ist die zweite CC Dreifachbindung an ein [Pt(PEt3)2] Fragment koordiniert, wodurch ein Platinalkinkomplex entsteht. Unter den Produkten der Gruppe iii) sind zuerst die Komplexe zu nennen, die zwei Ferrocenophangruppen tragen. Die so synthetisierten Produkte weisen jeweils zwei chirale Ebenen auf und wurden deshalb als Diastereomerenpaare erhalten. Es konnte gezeigt werden, dass die einzelnen Diastereomere durch Erhitzen in Lösung ineinander umgewandelt werden können. Mittels DFT-Rechnungen konnte zudem ein plausibler Mechanismus aufgedeckt werden. Neben den Bis [4]ferrocenophanen wurde ein Komplex dargestellt, in dem ein [4]Diboradicarbaferrocenophanfragment über eine Spacerfunktion an einen entsprechenden von Bis(benzol)chrom abgeleiteten Metalloarenophanrest gebunden ist. Weiterhin wurden durch Umsetzung von [Pt(PEt3)3] mit den entsprechenden Dialkinen in unterschiedlicher Stöchiometrie jeweils drei einkernige bzw. zweikernige Platinalkinkomplexe sowie ein Platinalkenkomplex synthetisiert. Die IR-spektroskopischen Untersuchungen legen die Formulierung als Platinacyclopropene bzw. Platinacyclopropane nahe. Durch die Diborierung von Isocyaniden konnte unter bemerkenswert milden Reaktionsbedingungen eine Reihe von chiralen, einkernigen Bis(boryl)iminokomplexen dargestellt werden. Die Synthese verläuft entweder durch direkte Umsetzung der Diborane(4) mit den entsprechenden Isocyaniden oder, mit verlängerten Reaktionszeiten auch durch Diborierung der Isocyanide mittels der entsprechenden [3]Metalloarenophane. Durch Umsetzung von [2]Borametalloarenophanen mit Diisocyaniden konnten zudem verschiedene zwei- bzw. dreikernige Bis(boryl)iminokomplexe zugänglich gemacht werden. Die hierzu ausgewählten Diisocyanide tragen wiederum eine Spacereinheit zwischen den beiden NC Funktionalitäten. Genau wie bei den Reaktionen von Dialkinen treten auch hier die Produkte als Paare von Diastereomeren auf. Ein weiteres Projekt beschäftigte sich mit der oxidativen Addition von [Fe{C5H4B(NMe2)}2] an verschiedene Übergangsmetallkomplexe. Die Umsetzungen führten allerdings in keinem Fall zur Bildung der gewünschten Bis(boryl)metallkomplexe. Bei verschiedenen Platinkomplexen kann jedoch die Bildung eines einheitlichen Produkts beobachtet werden. Es wird deshalb in Übereinstimmung mit den spektroskopischen Daten vermutet, dass es sich dabei um ein [2.2]Diboraferrocenophan handelt. Eine saubere Isolierung des Produkts gelingt jedoch nicht, weshalb der strukturelle Nachweis bislang nicht geführt werden kann. Abschließend konnte dabei gezeigt werden, dass mehrtägiges Erhitzen von [Fe{C5H4B(NMe2)}2Pt(PEt3)2] in Lösung hochselektiv zur Bildung des mutmaßlichen [2.2]Diboraferrocenophans führt. Weiterhin ist auch die Umsetzung von [Fe{C5H4B(NMe2)}2] mit katalytischen Mengen [Pt{P(CH2Cy)3}2] erfolgreich, führte jedoch nicht zu einer Isolierung des Produkts in Substanz. N2 - In the course of this work the transition metal-catalyzed diboration of unsaturated substrates has been studied in detail, while the main part was concerned with the functionalization of dialkynes. A number of new compounds were prepared featuring one of the following structural motifs: i) mononuclear [4]diboradicarbaferrocenophanes bound to a pendant CC triple bond either directly or via spacer, ii) related dinuclear complexes, in which the adjacent triple bond is coordinated toward a low-valent platinum fragment, and iii) dinuclear bis [4]diboradicarbaferrocenophanes formed by double diboration of the dialkyne. Four representatives of the first group were synthesized; two of them having the second CC triple bond bound directly to the bis(boryl)alkene unit, while for the other two a spacer group is present. The preparation of the complexes can either be accomplished by diboration via [Fe{C5H4B(NMe2)}2] using a catalytic amount of [Pt(PEt3)3] or by direct functionalization of the dialkynes with the [Fe{C5H4B(NMe2)}2Pt(PEt3)2]. Two species of the group ii) were obtained by reaction of the dialkynes with an equimolar amount of [Fe{C5H4B(NMe2)}2Pt(PEt3)2]. In this case, the second triple bond of the dialkyne is coordinated to a [Pt(PEt3)2] fragment, thus forming a platinum alkyne complex. Among the products of the last group are complexes bearing two ferrocenophane fragments featuring two chiral planes each and, therefore, being formed as pairs of diastereomers. The single diastereomers can be interconverted by heating in solution. A plausible mechanism was deduced from DFT calculations. Along with these bis [4]ferrocenophanes, a complex was synthesized in which the [4]ferrocenophane fragment is bound to a metalloarenophane moiety derived from bis(benzene)chromium via a spacer unit. In addition, the reaction of [Pt(PEt3)3] with the aforementioned dialkynes was studied for different stoichiometries, yielding three mononuclear and three dinuclear platinum alkyne complexes along with one platinum alkene complex. IR spectroscopic data suggest the formulation as platinacyclopropenes or –propane, respectively. Four mononuclear, chiral bis(boryl)imines were obtained by diboration of two different dialkynes under remarkably mild reaction conditions. The synthesis can be conducted either directly by reacting the diboranes(4) with the respective isocyanide, or  with prolonged reaction times – by diboration of the isocyanide via the corresponding [3]metalloarenophanes, respectively. The reaction of the [2]borametalloarenophanes with diisocyanides led to a series of dinuclear and trinuclear bis(boryl)imines. The chosen diisocyanides have a spacer unit between the two NC functionalities. In analogy to the related reactions with dialkynes, the products were formed as pairs of diastereomers. The oxidative addition of [Fe{C5H4B(NMe2)}2] toward different transition-metal complexes was also studied. However the formation of the envisaged bis(boryl)metal complexes could not be observed in any case. Interestingly, for different three platinum complexes a well-defined product was formed. In agreement with the spectroscopic parameters, the product most probably represents a [2.2]diboraferrocenophane, the formal dimerization product of [Fe{C5H4B(NMe2)}2]. Thus, heating [Fe{C5H4B(NMe2)}2Pt(PEt3)2] in solution for several days afforded this product highly selective. The reaction of [Fe{C5H4B(NMe2)}2] with catalytic amounts of [Pt{P(CH2Cy)3}2] leads to the same result. However, the product could not be isolated analytically pure. KW - Ferrocen KW - Sandwich-Verbindungen KW - Bor KW - Platin KW - Alkine KW - Heterogene Katalyse KW - Homogene Katalyse KW - Übergangsmetall KW - Cyclovoltammetrie KW - Diborierung KW - Diboration Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57209 ER - TY - THES A1 - Öchsner, Andreas T1 - Synthese, Struktur und Reaktivität von [2]Borametallocenophanen der Gruppe 4 Metalle : Ihr katalytisches Verhalten und die Eigenschaften der erhaltenen Polymere T1 - Synthesis, structure and reactivity of [2]borametallocenophanes of group 4 metals : Their catalytic behaviour and properties of the obtained polymers N2 - In der vorliegenden Arbeit wird die Darstellung einer Reihe monoarylsubstituierter Bisdimethylamino-1-bromo-2-arlydiborane(4) beschrieben. Sowohl die Umsetzung der monoarylsubstituierten Ligandenvorstufen mit einem weiteren Äquivalent Lithium- oder Natriumaryl in einem Ether/Toluol-Gemisch als auch die Umsetzung von 1,2-Dibrom-bis(dimethylamino)diboran(4) mit einem mehrfachen Überschuss Lithium- oder Natriumaryl führte zur Bildung von diarylsubstituierten Diboranen(4). Umsetzung der Ligandenvorstufen mit Lithiumorganylen, wie beispielsweise Li[CH3] oder Li[C4H9] führt zu doppelt deprotonierten Verbindungen. Werden die dilithiierten Verbindungen mit Metallhalogeniden der Gruppe 4 in einem Toluol/Ether-Gemisch umgesetzt, können [2]Borametallocenophane erhalten werden. Von einigen der Verbindungen konnte die Struktur im Festkörper mittels Einkristallstrukturanalyse bestimmt werden. Die Verbindungen zeigen in Lösung ein dynamisches Gleichgewicht, welches durch die Flexibilität der B-B-Brücke ermöglicht wird. Dieses konnte mittels NMR Spektroskopie untersucht werden. Auch die Reaktivität der Verbindungen wurde erforscht. Versuche zur oxidativen Addition von Platin(0) in die B-B-Bindung, wie sie bereits für ähnliche Systeme beschrieben waren, scheiterten. Ebenfalls nicht erfolgreich war der versuchte Austausch der Dimethylaminogruppen an den Bor-Atomen. Di(fluorenyl)substituierte [2]Borametallocenophane zeigen in der Reihe der dargestellten Verbindungen ein einzigartiges Verhalten. Wird die dilithiierte Liganden-Vorstufe bei der Umsetzung mit den Metallhalogeniden der Gruppe 4 Licht ausgesetzt, so lagert sie zum 1,3-Diboretan um. Auch oxidativ kann diese Umlagerung ausgelöst werden. Das Umlagerungsprodukt war von anderen Reaktionen bereits bekannt, konnte im Rahmen dieser Arbeit aber erstmals strukturell charakterisiert werden. Die Dichloroverbindungen der [2]Borametallocenophane können mittels Li[CH3] in die entsprechenden Dimethylkomplexe überführt werden. Damit besteht die Möglichkeit, die Verbindungen nicht nur mit MAO, sondern auch mit alternativen Co-Katalysatoren, wie beispielsweise Tris-(pentafluorphenyl)boran für die Olefinpolymerisation zu aktivieren. Die Aktivierung mittels MAO wurde sowohl mittels NMR- als auch mittels UV/Vis-Spektroskopie bei verschiedenen [Al]/[Zr] Verhältnissen untersucht. Neben den [2]Borametallocenonphanen konnte mit Verbindung [(n5-C29H37)2ZrCl2] das erste Metallocen mit dem neuen OctafluH-Liganden und zwei koordinierenden Arylgruppen dargestellt werden. Um die Polymerisationseigenschaften der Verbindungen zu untersuchen, wurde ein neuer Versuchsaufbau entworfen. Zur Überwachung der Polymerisationen wurde ein Programm entwickelt, was in der Lage war, verbrauchte Gasmenge und Temperatur im Reaktoraufzuzeichnen. Hier wurden die katalytischen Eigenschaften einer Serie von [2]Borametallocenophanen und des dargestellten Metallocens [(n5-C29H37)2ZrCl2] in der Ethen-Homopolymerisation untersucht. Diese Polymere wurden mittels DSC auf ihre thermischen Eigenschaften hin geprüft. Ausgewählte Polymere wurden in Zusammenarbeit mit der LyondellBasell Industries, Basell Polyolefine GmbH, Frankfurt mittels GPC auf ihr mittleres Molekulargewicht und dessen Verteilung hin untersucht. Alle Daten wurden mit denen von industriell verwendeten Katalysatoren und den von Kraft bekannten [1]Borametallocenophanen verglichen. In weiteren Untersuchungen wurde überprüft, in wie weit die Polymerisationsbedingungen, wie beispielsweise das [Al]/[Zr]-Verhältnis, die Temperatur oder der Druck Auswirkungen auf die Eigenschaften des Polymers haben. Eine Reihe von Komplexen wurde überdies in der Ethen/[1]Hexen-Copolymerisation untersucht. Die erhaltenen Copolymere wurden mittels DSC-, GPC-, IR- und NMR- Spektroskopie analysiert. Zusammenfassend lässt sich feststellen, dass eine Reihe neuer Verbindungen dargestellt und charakterisiert werden konnte, wobei insbesondere der neuartige Ligand OctafluH (C29H38) eingesetzt wurde. Die dargestellten [2]Borametallocenophane sind aktive Katalysatoren in der Ziegler-Natta ähnlichen Olefinpolymerisation. Die dargestellten Polymere wurden mittels verschiedener Methoden untersucht. Es zeigte sich, dass [2]Borametallocenophane langkettige Polyolefine und Ethen/1-Hexen Copolymere liefern können. N2 - Based on Krafts work on [1]borametallocenophanes, a various number of monoarylsubstituted bisdimethylamino-1-bromo-2-aryldiboranes(4) were synthesized in the present work. Either the reaction of these monoarylsubstituted compounds with one equivalent of a lithiumaryl in toluene/ether or direct reaction of 1,2-dibromo-bis(dimethylamino)diborane(4) with a large excess of the lithiumaryl leads to the formation of diaryl substituted diboranes(4). Reaction of the ligand precursors with lithium organyls, e.g. Li[CH3] or Li[C4H9] leads to double deprotonation. [2]Borametallocenophanes are accessible via reaction of the dilithiated species with metal halides of Group 4 in toluene/ether. Due to the flexibility of the B-B-bridge, these complexes show dynamic behaviour in solution, which can be monitored by NMR spectroscopy. The solid state structure of some of these complexes could be examined by X-Ray diffraction. The reactivity of the new [2]borametallocenophanes also was reviewed. An oxidative addition reaction of platinum(0) was published for similar systems, but failed in this case. Neither was it possible to substitute the bisdimethylamino-groups bound to the boron-atoms. The prepared di(fluorenyl)substituted [2]borametallocenophanes show a unique feature. If the dilithiated precursor is exposed to visible or UV light during reaction with metal halides of group 4, these complexes rearrange to the 1,3-diboretane. This rearrangement also can be performed oxidatively. The Compound has been previously characterized in solution by multinuclear NMR spectroscopy; its structure in the solid state is now reported for the first time. The [2]borametallocenophanedichlorides can be reacted with Li[CH3], resulting in the corresponding dimethyl complexes. This allows for an alternative activation of the complexes with co-catalysts like tris(pentafluorophenyl)borane, in addition to the common activation with MAO. A model reaction for this alternative activation was performed using K[B(C6F5)4] to obtain a ion pair via chlorine abstraction. The common activation of the metal complexes using MAO was monitored either by NMR- or by UV/Vis-spectroscopy at various [Al]/[Zr] ratios. In addition to the [2]borametallocenophanes, [(n5-C29H37)2ZrCl2] could be prepared. It is the first metallocene with two aryl groups of the new octafluH-ligand (C29H38). To analyse the activity of the compounds in olefin polymerization processes, a new experimental set-up was designed. To control the polymerisation reactions, a Software program was developed, which allowed us to record gas-consumption and temperature in the reactor simultaneously. The catalytic behaviour of a whole series of [2]borametallocenophanes and of compound [(η5-C29H37)2ZrCl2] was studied in ethene homopolymerization. The thermal properties of all produced polymers where analyzed by DSC. The molecular weight distribution of selected examples was studied in cooperation with LyondellBasell Industries, Basell Polyolefine GmbH with GPC analyses. All data where directly compared to reference catalysts and to the [1]borametallocenophanes made by Kraft. The data show, that [2]borametallocenophanes have lower activities than [1]borametallocenophanes, but produce polymers of significantly higher average molecular weight. One can see clear differences throughout the data of the DSC measurements, for instance in the melting point and metling range, or crystallinity of the polymer. The melting points of the polymers obtained from [2]borametallocenophanes and compound [(n5-C29H37)2ZrCl2] are significantly higher than those of the reference catalysts. Additional experiments gave some insight into the relationship between polymerization conditions, e.g. the [Al]/[Zr] ratio, temperature or pressure and the key features of the polymers. It was shown that all these parameters influence the melting point and other specific values of the polymer. Additionally, selected examples were tested in the ethene/1-hexene copolymerization. The copolymers have been analyzed using DSC, GPC, IR and NMR spectroscopy. In conclusion, some new products were prepared and analyzed, in many cases with OctafluH (C29H38) as a substituent. All [2]borametallocenophanes are active catalysts in Ziegler-Natta type olefin polymerization processes. Analyses of the produced polymers revealed that [2]borametallocenophanes can produce long-chain polyethylene and ethene/1-hexene copolymers. KW - Anorganische Chemie KW - Homogene Katalyse KW - Ziegler-Natta-Katalysator KW - Metallocene KW - Bor KW - Polyolefine KW - Metallocenophane KW - metallocenophanes Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-44444 ER - TY - THES A1 - Zarzycki, Bartosz T1 - Element-Element Bindungsaktivierung an [Ni(iPr2Im)2] und [(η5-C5H5)Co(iPr2Im)] T1 - Element-element bond-activation on [Ni(iPr2Im)2] and [(η5-C5H5)Co(iPr2Im)] N2 - Die vorliegende Dissertation behandelt zum einen die mechanistischen Details von Bindungsaktivierungs-Reaktionen an Disauerstoff und weißem Phosphor mit den Komplexfragmenten 1[Ni(iPr2Im)2] und 3[(η5-C5H5)Co(iPr2Im)] und zum anderen die Regioselektivität von oxidativen Insertionsreaktionen des 1[Ni(iPr2Im)2]-Komplexfragments in C–X-Bindungen substituierter Fluoraromaten (X = F, OCH3, CN, H). N2 - The presented thesis deals with the mechanistic details of bond activation reactions of the oxygen molecule and white phosphorus at the reactive complex fragments 1[Ni(iPr2Im)2] and 3[(η5-C5H5)Co(iPr2Im)] and with the regioselectivity of oxidative insertion reactions of the 1[Ni(iPr2Im)2]-fragment into C–X-bonds of functionalized fluorinated derivatives of benzene. KW - Heterocyclische Carbene <-N> KW - Homogene Katalyse KW - Reaktionsmechanismus KW - Theoretische Chemie KW - Weißer Phosphor KW - Cobalt KW - Nickel KW - Metallkomplexe KW - DFT KW - Dichtefunktionalformalismus KW - bonding mechanisms KW - orbital diagram Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-77195 ER - TY - THES A1 - Budiman, Yudha Prawira T1 - Applications of Fluorinated Aryl Boronates in Organic Synthesis T1 - Die Anwendungen von fluorinierten Arylboronaten in der organischen Synthese N2 - Fluorinated compounds are an important motif, particularly in pharmaceuticals, as one-third of the top performing drugs have fluorine in their structures. Fluorinated biaryls also have numerous applications in areas such as material science, agriculture, crystal engineering, supramolecular chemistry, etc. Thus, the development of new synthetic routes to fluorinated chemical compounds is an important area of current research. One promising method is the borylation of suitable precursors to generate fluorinated aryl boronates as versatile building blocks for organic synthesis. Chapter 1 In this chapter, the latest developments in the synthesis, stability issues, and applications of fluorinated aryl boronates in organic synthesis are reviewed. The catalytic synthesis of fluorinated aryl boronates using different methods, such as C–H, C–F, and C–X (X = Cl, Br, I, OTf) borylations are discussed. Further studies covering instability issues of the fluorinated boronate derivatives, which are accelerated by ortho-fluorine, have been reported, and the applications of these substrates, therefore, need special treatment. Numerous groups have reported methods to employ highly fluorinated aryl boronates that anticipate the protodeboronation issue; thus, polyfluorinated aryl boronates, especially those containing ortho-fluorine substituents, can be converted into chloride, bromide, iodide, phenol, carboxylic acid, nitro, cyano, methyl esters, and aldehyde analogues. These substrates can be applied in many cross-coupling reactions, such as the Suzuki-Miyaura reaction with aryl halides, the Chan-Evans-Lam C–N reaction with aryl amines or nitrosoarenes, C–C(O) reactions with N-(aryl-carbonyloxy)phthalamides or thiol esters (Liebskind-Srogl cross-coupling), and oxidative coupling reactions with terminal alkynes. Furthermore, the difficult reductive elimination from the highly stable complex [PdL2(2,6-C6F2+nH3-n)2] was the next challenge to be targeted in the homocoupling of 2,6-di-fluoro aryl pinacol boronates, and it has been solved by conducting the reaction in arene solvents that reduce the energy barrier in this step as long as no coordinating solvent or ancillary ligand is employed. Chapter 2 In this chapter, phenanthroline-ligated copper complexes proved to be efficient catalysts for the Suzuki-Miyaura cross-coupling of highly fluorinated aryl boronate esters (ArF–Bpin) with aryl iodides or bromides. This newly developed method is an attractive alternative to the traditional methods as copper is an Earth-abundant metal, less toxic, and cheaper compared to the traditional methods which commonly required palladium catalysts, and silver oxide that is also often required in stoichiometric amounts. A combination of 10 mol% copper iodide and 10 mol% phenanthroline, with CsF as a base, in DMF, at 130 ˚C, for 18 hours is efficient to cross-couple fluorinated aryl pinacol boronates with aryl iodides to generate cross-coupled products in good to excellent yields. This method is also viable for polyfluorophenyl borate salts such as pentafluorophenyl-BF3K. Notably, employing aryl bromides instead of aryl iodides for the coupling with fluorinated aryl–Bpin compounds is also possible; however, increased amounts of CuI/phenanthroline catalyst is necessary, in a mixture of DMF and toluene (1:1). A diverse range of π···π stacking interactions is observed in the cross-coupling products partly perfluorinated biaryl crystals. They range from arene–perfluoroarene interactions (2-(perfluorophenyl)naphthalene and 2,3,4-trifluorobiphenyl) to arene–arene (9-perfluorophenyl)anthracene) and perfluoroarene–perfluoroarene (2,3,4,5,6-pentafluoro-2’methylbiphenyl) interactions. Chapter 3 In this chapter, the efficient Pd-catalyzed homocoupling reaction of aryl pinacol pinacol boronates (ArF–Bpin) that contain two ortho-fluorines is presented. The reaction must be conducted in a “noncoordinating” solvent such as toluene, benzene, or m-xylene and, notably, stronger coordinating solvents or ancillary ligands have to be avoided. Thus, the Pd center becomes more electron deficient and the reductive elimination becomes more favorable. The Pd-catalyzed homocoupling reaction of di-ortho-fluorinated aryl boronate derivatives is difficult in strongly coordinating solvents or in the presence of strong ancillary ligands, as the reaction stops at the [PdL2(2,6-C6F2+nH3-n)2] stage after the transmetalations without the reductive elimination taking place. It is known that the rate of reductive elimination of Ar–Ar from [ML2(Ar)(Ar)] complexes containing group-10 metals decreases in the order Arrich–Arpoor > Arrich–Arrich > Arpoor–Arpoor. Furthermore, reductive elimination of the most electron-poor diaryls, such as C6F5–C6F5, from [PdL2(C6F5)2] complexes is difficult and has been a challenge for 50 years, due to their high stability as the Pd–Caryl bond is strong. Thus, the Pd-catalyzed homocoupling of perfluoro phenyl boronates is found to be rather difficult.   Further investigation showed that stoichiometric reactions of C6F5Bpin, 2,4,6-trifluorophenyl–Bpin, or 2,6-difluorophenyl–Bpin with palladium acetate in MeCN stops at the double transmetalation step, as demonstrated by the isolation of cis-[Pd(MeCN)2(C6F5)2], cis-[Pd(MeCN)2(2,4,6-C6F3H2)2], and cis-[Pd(MeCN)2(2,6-C6F2H3)2] in quantitative yields. Thus, it can be concluded that the reductive elimination from diaryl-palladium complexes containing two ortho-fluorines in both aryl rings, is difficult even in a weakly coordinating solvent such as MeCN. Therefore, even less coordinating solvents are needed to make the Pd center more electron deficient. Reactions using “noncoordinating” arene solvents such as toluene, benzene, or m-xylene were conducted and found to be effective for the catalytic homocoupling of 2,6-C6F2+nH3-nBpin. The scope of the reactions was expanded. Using toluene as the solvent, the palladium-catalyzed homocoupling of ArF–Bpin derivatives containing one, two or no ortho-fluorines gave the coupled products in excellent yields without any difficulties. DFT calculations at the B3LYP-D3/def2-TZVP/6-311+g(2d,p)/IEFPCM // B3LYP-D3/SDD/6-31g**/IEFPCM level of theory predicted an exergonic process and lower barrier (< 21 kcal/mol) for the reductive elimination of Pd(C6F5)2 complexes bearing arene ligands, compared to stronger coordinating solvents (acetonitrile, THF, SMe2, and PMe3), which have high barriers ( > 33.7 kcal/mol). Reductive elimination from [Pd(ηn-Ar)(C6F5)2] complexes have low barriers due to: (i) ring slippage of the arene ligand as a hapticity change from η6 in the reactant to ηn (n ≤ 3) in the transition state and the product, which led to less σ-repulsion; and (ii) more favorable π-back-bonding from Pd(ArF)2 to the arene fragment in the transition state. Chapter 4 In this chapter, the efficient Pd-catalyzed C–Cl borylation of aryl chlorides containing two ortho-fluorines is presented. The reactions are conducted under base-free conditions to prevent the decomposition of the di-ortho-fluorinated aryl boronates, which are unstable in the presence of base. A combination of Pd(dba)2 (dba = dibenzylideneacetone) with SPhos (2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl) as a ligand is efficient to catalyze the C–Cl borylation of aryl chlorides containing two ortho-fluorine substituents without base, and the products were isolated in excellent yields. The substrate scope can be expanded to aryl chloride containing one or no ortho-fluorines and the borylated products were isolated in good to very good yield. This method provides a nice alternative to traditional methodologies using lithium or Grignard reagents. N2 - Fluorierte Verbindungen sind insbesondere in der Pharmazie wichtige Bausteine, da ein Drittel der wirksamen Medikamente Fluorsubstituenten beinhalten. Fluorierte Biaryle haben auch zahlreiche Anwendungen in Bereichen wie der Materialwissenschaft, der Landwirtschaft, dem Design molekularer Festkörperstrukturen, der supramolekularen Chemie etc. Daher ist die Entwicklung neuer synthetischer Wege zu fluorierten chemischen Verbindungen sehr gefragt. Eine der vielversprechenden Methoden ist die Borylierung geeigneter Vorstufen zur Erzeugung fluorierter Arylboronate, die als vielseitige Bausteine für die organische Synthese dienen können. ... KW - Chemistry KW - Homogeneous Catalysis KW - borylation KW - boronates KW - fluorine KW - C-C coupling KW - Homogene Katalyse KW - Borylierung KW - Fluorierung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-217579 ER -