TY - THES A1 - Herberth, Edith T1 - Hydro- und Carboborierungs-/Oxidationsreaktionen von Tricyclo[4.1.0.02,7]heptan-Derivaten sowie Synthese und Solvolyse-Reaktionen von exo,exo-Bicyclo[1.1.0]butan-2,4-dimethanoldimethansulfonat T1 - Hydro- and Carboboration/Oxidation Reactions of Tricyclo[4.1.0.02,7]heptane Derivatives as well as Synthesis and Solvolyses Reactions of exo,exo-Bicyclo[1.1.0]butane-2,4-dimethanol Dimethanesulfonate N2 - Die bekannte Umwandlung des Bromtricycloheptans 4 in den Homoallylalkohol 76 durch Hydroborierung/Oxidation wurde anders als früher mit einer in situ aus Natriumborhydrid und elementarem Iod erzeugten Boran-THF-Lösung bewirkt. Darüber hinaus konnten unter den gleichen Bedingungen das Chlortricycloheptan 26 und das Methyltricycloheptan 62 in den Homoallylalkohol 108 bzw. 109 überführt werden. Über 4, 26, 62 und das Phenyltricycloheptan 15 hinaus, dessen Hydroborierung/ Oxidation zum Homoallylalkohol 45a schon früher gelungen war, wurde eine Reihe von Bicyclo[1.1.0]butan-Derivaten mit Boran behandelt und das Gemisch dann oxidiert. Allerdings ergab sich in keinem Fall ein zu den Homoallylalkoholen 45a, 76, 108 und 109 analoges Produkt. Über die Ursachen dieser Misserfolge kann gegenwärtig nur spekuliert werden. Immerhin fand sich bei 3,4-Benzotricyclo[4.1.0.02,7]heptan (83) ein Hinweis auf eine Oligomerenbildung des Substrats. Als Grund für die Anlagerung von Boran an 4, 15, 26 und 62 wird die Fähigkeit der Substituenten am Tricycloheptan-System, eine positive Ladung zu stabilisieren, gesehen. Durch die Umsetzung von Trideuteroboran mit 4 wurden bestimmte Reaktions-mechanismen ausgeschlossen, etwa der via das Umlagerungsprodukt 119 von 4 und Hydroborierung von 119, und der mit dem Zwitterion 120 gestützt, das durch 1,2-Deuteridverschiebung in das Cyclohexenylmethylboran 121 umlagern sollte, das als die Vorstufe des nach der Oxidation isolierten Produkts 87 angesprochen wird. Die Reaktionen von 4 und 15 mit 9-Borabicyclo[3.3.1]nonan (9-BBN), gefolgt von der Oxidation des Gemisches, lieferten je nach der Geschwindigkeit der Zugabe von 9-BBN entweder die Dialkohole 122 bzw. 123, jeweils als Diastereomerengemische, oder/und die Homoallylalkohole 76 bzw. 45a. Als Vorstufen der Verbindungen 122 und 123 werden Zwitterionen des Typs 124, Trialkylborane 125, Zwitterionen 127 und Trialkylborane 128 und 129 gesehen. Die Zwitterionen 124 sollten durch Addition von 9-BBN an die Substrate 4 und 15 entstehen und durch Hydridwanderung in 125 übergehen, deren Anlagerung von 4/15 die Zwitterionen 126 und dann 127 hervorbringen sollte. Die 1,2-Wanderung eines Achtring-Kohlenstoffatoms müsste zu 128 und 129 führen, die durch Oxidation in 122/123 umgewandelt werden dürften. Das Dimesylat exo,exo-142 wurde in einer mehrstufigen Synthese über den bekannten Dibromdialkohol 148 ausgehend von Benzvalen (82) synthetisiert. Die Alkoholfunktionen von 148 wurden mit Trimethylsilylchlorid geschützt unter Bildung des Bis(silylethers) 151. Aus 151 wurde durch Umsetzung mit tert-Butyllithium das Bicyclobutan exo,exo-152 dargestellt. Nach Abspaltung der Schutzgruppen mit Kaliumcarbonat in Methanol wurde der Dialkohol exo,exo-150 erhalten, welcher mit Methansulfonsäurechlorid zum Zielmolekül exo,exo-142 reagierte. Die Reaktion einer 2:1-Mischung aus exo,exo-150 und 157 mit Natriumhydrid und Iodethan lieferte die Bis(ethylether) 160 und 161 in 38% bzw. 19% Ausbeute. In den Solvolyse-Reaktionen wurde ein 36:1:16-Gemisch aus exo,exo-142, endo,-endo-142 und 159 eingesetzt. Bei der Reaktion des Gemischs in 60% wässrigem Aceton in Gegenwart von Triethylamin bei 40 °C über fünf Tage zeigten die NMR-Spektren die Abnahme von exo,exo-142 um 75% (bezogen auf 159 als internen Standard), es konnte aber kein Produkt identifiziert werden. Die Ethanolyse bei 40 °C in Gegenwart von Triethylamin lieferte nach drei Tagen ein 3.5:2.8:1.0-Gemisch aus exo,exo-142, 159 und 162. Die Verbindung 162 wurde mit 70% Ausbeute (bezogen auf umgesetztes exo,exo-142) gebildet. Die NMR-Spektren zeigten einen Umsatz von exo,exo-142 von 30% (bezogen auf 159 als internen Standard). Wurde die Reaktion unter den gleichen Bedingungen sieben Tage durchgeführt, verringerte sich der Anteil an exo,exo-142 um 50% und man erhielt eine 1:1:1-Mischung aus exo,exo-142, 159 und 162. Die Ausbeute von 162 lag bei 50% (bezogen auf umgesetztes exo,exo-142). Bei der Solvolyse in 2,2,2-Trifluorethanol über drei Tage bei 40 °C in Gegenwart von Triethylamin erhielt man ein 3.2:2.0:1.0-Gemisch aus exo,exo-142, 159 und 163. Anhand der NMR-Spektren wurde ein Umsatz von exo,exo-142 von 20% beobachtet (bezogen auf 159 als internen Standard). Die Solvolyse-Reaktionen des Dimesylats exo,exo-142 verlaufen, anders als die seines Diastereomers endo,endo-142, unter ausschließlicher Bildung von Produkten mit nicht umgelagertem Gerüst und liefern damit erstmals einen deutlichen Hinweis für die Existenz eines Bicyclo[1.1.0]but-2-exo-ylcarbinyl-Kations (166) als Intermediat. Es ist zu erwarten, dass 162 und 163 ihrerseits solvolysieren unter Bildung des Bis(ethylethers) 160 bzw. dessen Hexafluor-Derivates, aber diese Verbindungen sind unter den Solvolysebedingungen nicht stabil. Dies konnte in einem Kontrollexperiment bestätigt werden. N2 - The known transformation of bromotricycloheptane 4 into the homoallylalcohol 76 by hydroboration/oxidation was performed different to the earlier procedure by using in the first step a THF solution of borane generated in situ from sodiumborohydride and elemental iodine. Furthermore chlorotricycloheptane 26 and methyltricycloheptane 62 could be transformed into the homoallylalcohol 108 and 109, respectively, by using the same reaction conditions. Beside 4, 26, 62 and phenyltricycloheptane 15, which hydroboration/oxidation to homoallylalcohol 45a succeeded earlier, a variety of bicyclo[1.1.0]butane derivatives was treated with borane and then the mixture was oxidized. But no reaction resulted in a product analogous to the homoallylalcohols 45a, 76, 108 and 109. About the reason for the failure of these reactions at this time only can be speculated. However, in the case of 3,4-benzotricyclo[4.1.0.02,7]heptane (83) evidence was given for formation of oligomers from the substrate. The ability to stabilize a positive charge of the substituents at the tricycloheptane system is to be considered as a reason for the addition of borane to 4, 15, 26 and 62. Based on the transformation of 4 with trideuteroborane certain reaction mechanisms, for example that via the rearrangement product 119 of 4 and hydroboration of 119, were excluded and that with the zwitterion 120 was supported. 120 should rearrange through a 1,2-shift of deuteride into cyclohexenylmethylborane 121 which is seen as a precursor in the oxidation reaction to the isolated product 87. The reactions of 4 and 15 with 9-borabicyclo[3.3.1]nonane (9-BBN) followed by oxidation of the mixture generated depending on the addition rate of 9-BBN to the substrate the dialcohols 122 and 123, respectively, in both cases as a diastereomeric mixture and/or the homoallylalcohol 76 and 45a, respectively. Zwitterions 124, trialkylboranes 125, zwitterions 127 and trialkylboranes 128 and 129 are considered as precursors for the compounds 122 and 123. The zwitterions 124 should be formed by addition of 9-BBN to the substrates 4 and 15 and should be transformed by hydride shift into 125 which should give rise to zwitterions 126 and then 127 after addition of 4/15. 1,2-Shift of a carbon atom of the eight-membered ring should lead to 128 and 129 which should be transformed into 122/123 by oxidation. Dimesylate exo,exo-142 was obtained in a more step reaction via the known dibromodialcohol 148 starting from benzvalene (82). The alcohol groups of 148 were protected with trimethylsilyl chloride by formation of the bis(silyl ether) 151. Bicyclo-butane exo,exo-152 was obtained from 151 by reaction with tert-butyllithium. After removing the protecting groups with potassium carbonate in methanol the dialcohol exo,exo-150 was formed. This alcohol reacted with methanesulfonyl chloride to the target molecule exo,exo-142. The reaction of a 2:1 mixture of exo,exo-150 and 157 with sodium hydride and iodoethane generated the bis(silyl ethers) 160 and 161 in 38% and 19% yield, respectively. For the solvolyses reactions a 36:1:16 mixture of exo,exo-142, endo,endo-142 and 159 was used. After reacting the mixture in 60% acetone/water in the presence of triethylamine at 40 °C during five days the NMR spectra showed a decrease of exo,exo-142 by 75% (determined by using 159 as internal standard) while no product could be identified. The ethanolysis at 40 °C during three days in the presence of triethylamine produced a 3.5:2.8:1.0 mixture of exo,exo-142, 159 and 162. The compound 162 was formed with 70% yield (based on exo,exo-142 consumed). The NMR spectra showed that the proportion of exo,exo-142 had decreased by 30% (determined by using 159 as internal standard). After seven days using the same reaction conditions the proportion of exo,exo-142 decreased by 50% (determined by using 159 as internal standard) and a 1:1:1 mixture of exo,exo-142, 159 and 162 was obtained. 162 was formed with 50% yield (based on exo,exo-142 consumed). Solvolysis in 2,2,2-trifluoroethanol at 40 °C during three days in the presence of triethylamine produced a 3.2:2.0:1.0 mixture of exo,exo-142, 159 und 163. In the NMR spectra a decrease of exo,exo-142 by 20% was observed (determined by using 159 as internal standard). The solvolyses reactions of the dimesylate exo,exo-142 proceed, in contrast to those of its diastereomer endo,endo-142, solely with formation of unrearranged products and therefore they offer for the first time strong evidence for the intermediacy of a bicyclo[1.1.0]-but-2-exo-ylcarbinyl cation (166). It should be expected that the compounds 162 and 163 solvolyses on their part to give the bis(ethyl ether) 160 and its hexafluoro-derivative, respectively, but these compounds are not stable under the solvolyses conditions. This was proved by a control experiment. KW - Tricycloheptanderivate KW - Hydroborierung KW - Oxidation KW - Bicyclobutanderivate KW - Chemische Synthese KW - Bicyclobutanderivate KW - Solvolyse KW - Bicyclobutane KW - Hydroborierung KW - Solvolysen KW - Bicyclobutanes KW - Hydroboration KW - Solvolyses Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4952 ER - TY - THES A1 - Güllük, Eduard T1 - Synthese von Cyclopenta[c]pyran-3(5H)-on und Cyclopenta[c]pyran-3(7H)-on als Vorstufen von Cyclopenta[c]pyranen T1 - Synthesis of cyclopenta[c]pyran-3(5H)-one and cyclopenta[c]pyran-3(7H)-one as precursors of cyclopenta[c]pyrans N2 - Die bisher unbekannten a-Pyrone Cyclopenta[c]pyran-3(5H)-on und Cyclopenta[c]pyran-3(7H)-on wurden auf zwei unabhängigen Synthesewegen hergestellt. Die Reaktivität der neuen a-Pyrone wurde untersucht. Das Hauptaugenmerk lag dabei auf der Synthese von Cyclopenta[c]pyranen. N2 - The hitherto unkwown a-pyrones cyclopenta[c]pyran-3(5H)-one and cyclopenta[c]pyran-3(7H)-one were prepared via two independent synthetic pathways. The reactivity of the new a-pyrones was investigated. The main objective was the synthesis of cyclopenta[c]pyrans. KW - Cyclopentapyrane KW - Pyranonen KW - Chemische Synthese KW - Cyclopenta[c]pyran-3(5H)-on KW - Cyclopenta[c]pyran-3(7H)-on KW - Cyclopenta[c]pyrane KW - cyclopenta[c]pyran-3(5H)-one KW - cyclopenta[c]pyran-3(7H)-one KW - cyclopenta[c]pyrans Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-6759 ER - TY - THES A1 - Bickert, Volker T1 - Neue künstliche Guanidiniocarbonylpyrrol-Rezeptoren zur Komplexierung von Oxo-Anionen in Wasser T1 - New artificial Guanidiniocarbonyl Pyrrole Receptors for the Complexation of Oxo-Anions in Water N2 - Ziel der Dissertation „Neue künstliche Guanidiniocarbonylpyrrol-Rezeptoren zur Komplexierung von Oxo-Anionen in Wasser“ war die Weiterentwicklung dieser Rezeptoren nach Schmuck für die Komplexierung insbesondere von Carboxylaten, um sie hinsichtlich Bindungsaffinität und Substratspezifität zu optimieren. Dazu wurde zunächst die Synthese zweier wichtiger Grundbausteine in einzelnen Schritten vollständig überarbeitet, wobei veränderte Reaktionsbedingungen und Aufarbeitungsschritte zu gesteigerten Ausbeuten führten. Dadurch ist es nun möglich, diese Bausteine effizienter zu synthetisieren und im Multigramm-Maßstab für die Darstellung von Rezeptoren zur Oxo-Anionen-Erkennung einzusetzen. Weiterhin wurde die Verbesserung der Komplexierungseigenschaften gegenüber Carboxylaten auf zwei Arten untersucht: zum einen durch das Anbringen eines zusätzlichen Seitenarms an der Guanidinio-Einheit zur Bildung von Guanidiniocarbonylpyrrol-Tweezer-Rezeptoren, zum anderen durch das Einführen einer zweiten positiven Ladung neben der Carboxylat-Bindungsstelle (CBS) zur Darstellung biskationischer Guanidiniocarbonylpyrrol-Rezeptoren. Zur Darstellung von Tweezer-Rezeptoren wurde ein zusätzlicher Seitenarm an der N’-Position der Guanidinio-Einheit angebracht. Die beiden Arme sollten ein Substrat pinzettenartig von zwei Seiten, mit der CBS als Kopfgruppe, komplexieren können. Durch zusätzliche Wechselwirkungen des neuen Seitenarms sollte neben einer stärkeren Komplexierung vor allem eine höhere Substratspezifität erzielt werden. Die experimentell ermittelten Bindungskonstanten lagen allerdings im Bereich der N’-unsubstituierten Rezeptoren. Somit stellen die Tweezer-Modifikationen daher keine Verbesserung der Guanidiniocarbonylpyrrol-Rezeptoren dar. In einem weiteren Projekt zur Rezeptor-Optimierung wurden, durch Einführung einer zweiten positiven Ladung in Form einer terminalen Ammonium-Gruppe, biskationische Guanidiniocarbonylpyrrol-Rezeptoren erfolgreich synthetisiert. Die Komplexierungseigenschaften dieser biskationischen Rezeptoren wurden in Bindungsstudien vornehmlich mit Aminosäurecarboxylaten mittels UV- und Fluoreszenz-Spektroskopie, Massenspektrometrie, NMR-Spektroskopie, ITC und Molecular Modeling Berechnungen untersucht. Anhand der Substratspezifität der biskationischen Rezeptoren wurde deutlich, dass die Spacerlänge, an der die zusätzliche positive Ladung angebracht ist, eine entscheidende Rolle bei der Komplexierung spielte. Galten eigentlich starre, präorganisierte, kurze Linker als vorteilhaft hinsichtlich der Entropie, so ist hier zu erkennen, dass längere, flexiblere Linker zu einer besseren Komplexierung führen können, wenn geeignete zusätzliche nichtkovalente Wechselwirkungen möglich sind. Die biskationischen Rezeptoren stellen damit eine Optimierung des Carboxylat-Bindungsmotivs der Guanidiniocarbonylpyrrol-Rezeptoren nach Schmuck in der Anionen-Erkennung dar. N2 - The main focus of the thesis “New artificial guanidiniocarbonyl pyrrole receptors for the complexation of oxo-anions in water” is the optimization of these receptors introduced by Schmuck for the oxo-anion recognition, especially carboxylates, in aqueous solution. Therefore, the details of the synthesis of two important building blocks were completely revised and yields increased by changing reaction conditions, workup and isolation steps. The new optimized, facile and efficient synthetic route to these N-protected guanidinocarbonyl pyrrole derivatives allows now a multi-gram synthesis of these versatile compounds as needed for the synthesis for a variety of supramolecular anion binding motifs. Furthermore two strategies to optimize the anion recognition have been pursued: On the one hand tweezer receptors were developed by connecting an additional side chain to the head group at the N’-position of the guanidino group. On the other hand another second positive charge was introduced into the receptor besides the carboxylate binding site (CBS) by an ammonium group to get bis-cationic receptors The tweezer receptors were developed in order to complex the guest from more than one side. A second side chain, connected to the N’-position of the guanidinio motif, leads to this kind of receptor, with the CBS as a head group. By using additional non covalent interactions in both side chains, the association constant as well as the specificity should be increased. In case of the optimization of the binding properties, the tweezer receptors have showen binding properties similar to the N’-unsubstituted guanidiniocarbonyl pyrrole receptors with respect to association constants and specificity. For this reason the tweezer receptors were no improvement of the guanidiniocarbonyl pyrrole receptors. In another project for optimization of the binding properties several bis-cations were synthesized, with a simple primary ammonium cation attached via flexible linkers of varying length to a guanidiniocarbonyl pyrrole. In UV-binding studies in aqueous buffer these bis-cations have shown efficient binding of various N-acetyl amino acid carboxylates. Further investigations by fluorescence spectroscopy, mass spectrometry, NMR spectroscopy, ITC as well as molecular mechanics calculations confirm the complexation by participation of the second charge in the complexation of the carboxylic function and therefore an increasing in complex stability. It is generally assumed, that short and rigid linkers are better for complexation due to the entropy and that a steady decrease of a linker length increase the complex stability. However, this case shows, that complex stability can increase while increasing the flexibility of a linker until other non covalent interactions are possible. Hence, the bis-cationic receptors indeed represent an optimisation of the guanidiniocarbonyl pyrrole receptors for oxo-anion-binding. KW - Molekulare Erkennung KW - Anion KW - Wirkstoff-Rezeptor-Bindung KW - Ligand KW - Peptidsynthese KW - Chemische Synthese KW - Guanidinderivate KW - Oxo-Anionen-Erkennung KW - Guanidiniocarbonylpyrrol KW - nicht-kovalente Wechselwirkungen KW - Supramolekulare Chemie KW - Tweezer-Rezeptoren KW - oxo anion recognition KW - guanidiniocarbonyl pyrrole KW - non-covalent interactions KW - supramolecular chemistry KW - tweezer receptors Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-32460 ER - TY - THES A1 - Gulder, Tobias Alexander Marius T1 - Neue bioaktive Naturstoffe : Strukturaufklärung, Biosynthese und Synthese sowie stereochemische Analyse von Naturstoffen und synthetischen Verbindungen durch HPLC-CD T1 - Novel Bioactive Natural Products : Structural Elucidation, Biosynthesis and Synthesis as well as Stereochemical Analysis of Natural Products and Synthetic Compounds Using HPLC-CD N2 - Die Natur entwickelte im Laufe der Evolution eine unvorstellbare Vielfalt an unterschiedlichsten Lebewesen. Viele diese Organismen besitzen die Fähigkeit, biologisch aktive Sekundärstoffe zu produzieren, die ihnen im täglichen Überlebenskampf einen Vorteil gegenüber ihren Konkurrenten bieten. Die Effizienz, mit der solche Naturstoffe in lebenden Organismen biosynthetisch dargestellt werden, wurde von der organisch-chemischen Synthese bislang nicht annähernd erreicht. Die Untersuchung von Biosynthese-Routen verspricht daher nicht nur die Entdeckung wissenschaftlich interessanter Phänomene, sondern bietet zudem die Chance, von der Natur zu lernen. Die Ergebnisse der vorliegenden Arbeit zeigen dabei deutlich, dass sowohl die genaue Analyse des Aufbaus bereits lange bekannter Metabolite, wie z.B. des Furanonaphthochinons I (FNQ I) oder des Chrysophanols, als auch die Untersuchung der Biosynthese strukturell neuartiger Sekundärstoffe, wie etwa des Sorbicillactons A, von großem Interesse sein können. Die gewonnenen Informationen können dann zur optimierten biotechnologischen oder synthetischen Produktion viel versprechender bioaktiver Substanzen genutzt werden. Auch die Gewinnung neuer Substanzen aus der Natur, z.B. als Leitstrukturen für die Pharma-Forschung, ist ein lohnendes Ziel. Eine stete Verbesserung der Methoden zur Charakterisierung von Naturstoffen, z.B. unter Anwendung von Online-Analyse-Verfahren, hilft dabei, die gezielte Entdeckung noch unbekannter Metabolite schneller und einfacher zu gestalten. Für die Aufklärung der Konstitution von Substanzen nützlich ist hier vor allem die Kopplung von HPLC mit NMR und MS, wie beispielsweise im Rahmen der Identifizierung von Secohyperforin und neuer mariner Macrolactame gezeigt. Die Kombination von HPLC mit CD bietet zudem die Chance zur effizienten Aufklärung der absoluten Stereostruktur chiraler Verbindungen direkt am Peak im Chromatogramm. Ziel der vorliegenden Arbeit war die Isolierung, die biosynthetische und strukturelle Charakterisierung sowie die Produktion bioaktiver Sekundärstoffe unter Anwendung und Weiterentwicklung unterschiedlichster Konzepte und Methoden der Naturstoffchemie. Die vielfältigen Ergebnisse sind das Resultat von interdisziplinären Kooperationen innerhalb des SPP 1152 (DFG Schwerpunktprojekts 'Evolution metabolischer Diversität') und des vom BMBF geförderten Exzellenzzentrums BIOTECmarin ('Nachhaltige Nutzung mariner Schwämme'). N2 - In the course of evolution nature has developed an unimaginable abundance of most diverse creatures. Most of these organisms produce biologically active secondary metabolites, which give them advantages over their competitors in their daily fight for survival. The efficiency of the biosynthesis of such natural products in living organisms has by far not been reached by organic-chemical synthesis. The investigation of biosynthetic routes therefore does not only promise to discover academically interesting phenomena, but additionally provides the chance to learn from nature. The results of the work presented here clearly show that both, the analysis of pathways to long-known metabolites, like, e.g., furanonaphthoquinone I (FNQ I) or chrysophanol, as well as investigations on the biosynthesis of structurally unprecedented, novel secondary metabolites, like, e.g., sorbicillactone A, can be of particular interest. The information thus obtained can then be utilized for an optimized biotechnological or synthetic production of promising biologically active compounds. The extraction of novel substances from natural sources, e.g., as lead structures for pharmaceutical research, is likewise a rewarding goal. The continuous improvement of methods for the characterization of natural products, e.g., by application of online analytical methods, helps to accelerate and to simplify the directed discovery of as yet unknown metabolites. To elucidate the constitutions of compounds, the hyphenation of HPLC with NMR and MS is of particular value, as it becomes obvious from the identification of secohyperforin and of new marine macrolactams. The combination of HPLC and CD additionally offers the possibility to elucidate full absolute stereostructures of chiral compounds directly from the peak in the chromatogram. The aim of the present work was the isolation, characterization, and production of secondary metabolites by applying und further developing diverse concepts and methods of natural products chemistry. The versatile findings are the result of interdisciplinary cooperations within the SPP 1152 (DFG priority programme 'Evolution of Metabolic Diversity') and the BMBF-funded center of excellence BIOTECmarin ('Sustainable Use of Marine Sponges'). KW - Naturstoff KW - Biosynthese KW - Chemische Synthese KW - HPLC-CD-NMR KW - Natural Products KW - Biosynthesis KW - Chemical Synthesis KW - HPLC-CD-NMR Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26789 ER - TY - THES A1 - Götz, Daniel Christian Günter T1 - Synthese intrinsisch axial-chiraler mono-, di und trimerer Porphyrine sowie Strukturaufklärung und stereochemische Analyse von chiralen Porphyrinoiden und Naturstoffen durch HPLC-NMR- und HPLC-CD-Kopplung T1 - Synthesis of intrinsically axially chiral mono-, di-, and trimeric porphyrins and structural elucidation and stereochemical analysis of chiral porphyrinoids and natural products by HPLC-NMR and HPLC-CD coupling N2 - Seit der Strukturaufklärung der grünen Blattpigmente Chlorophyll a und Chlorophyll b sowie des roten Blutfarbstoffes Häm durch Richard Willstätter und Hans Fischer zu Beginn des 20. Jahrhunderts stehen tetrapyrrolische Naturstoffe weltweit im Fokus unzähliger biologischer, medizinischer, physikalischer und chemischer Forschungsarbeiten. Heute spielen insbesondere Porphyrine – die prominentesten Vertreter der synthetischen Tetrapyrrol-Makrocyclen – eine bedeutende Rolle in der modernen angewandten Chemie, etwa als metallorganische Katalysatoren, als Photosensibilisatoren in der photodynamischen Krebstherapie oder auf dem Gebiet der Materialwissenschaften. Neben monomeren Porphyrinen sind dabei v.a. Multiporphyrine mit maßgeschneiderten photophysikalischen Eigenschaften und definierter dreidimensionaler Struktur höchst attraktive Syntheseziele. Im Gegensatz zum immensen Forschungsinteresse an achiralen Porphyrin-Systemen wurde der Darstellung und stereochemischen Charakterisierung chiraler Porphyrinoide bislang vergleichsweise wenig Beachtung geschenkt. Insbesondere optisch aktive Vertreter mit stereo-genen Porphyrin-Aryl-Achsen und intrinsisch axial-chirale Oligoporphyrine wurden bislang kaum untersucht. Aufgrund eines Mangels an geeignet funktionalisierten tetrapyrrolischen Vorläufern sind hierbei Strukturmotive mit β-Verknüpfung besonders unterrepräsentiert. Die generell spärliche Beschreibung axial-chiraler Porphyrin-Systeme und ihrer chiroptischen Eigenschaften liegt hauptsächlich in der oft extrem schweren Zugänglichkeit entsprechender Verbindungen – insbesondere in optisch reiner Form – begründet. Aufgrund der derzeit rapide ansteigenden Bedeutung chiraler Porphyrinoide sind die Synthese und stereochemische Analyse sowie eine Erweiterung des bis dato mehr als begrenzten methodischen Repertoires zur stereoselektiven Darstellung von chiralen Porphyrin-Derivaten von größtem Interesse. Ziel der vorliegenden Arbeit war daher die Etablierung effizienter und vielseitig ein-setzbarer Verfahren zum Aufbau komplexer axial-chiraler Mono- und Multiporphyrine mit maßgeschneiderten chemischen, physikalischen und chiroptischen Eigenschaften sowie unter-schiedlicher räumlicher Anordnung der Chromophore. Desweiteren sollten erstmals verschiedene Konzepte zur stereoselektiven Synthese axial-chiraler Porphyrin-Systeme entwickelt und vergleichend erprobt werden. Bei allen bearbeiteten Fragestellungen standen ein tieferes Verständnis stereochemischer Aspekte sowie die eingehende Untersuchung der chiroptischen Eigenschaften (z.B. unter Anwendung moderner HPLC-Kopplungstechniken) der neuartigen synthetisierten Verbindungen im Vordergrund. N2 - Since the structural elucidation of the green leaf pigments chlorophyll a and chlorophyll b and the red blood dye heme by Richard Willstätter and Hans Fischer in the early 20th century, the broad area of tetrapyrrole research has become one of the most exciting, stimulating, and rewarding for scientists from most diverse disciplines like biology, medicince, and chemistry. Today in particular porphyrins – the most prominent representatives amongst synthetic tetrapyrroles – play a crucial role in modern applied chemistry, e.g., as metalorganic catalysts, as photosensitizers in photodynamic cancer therapy or in the field of material science. Besides monomeric porphyrins predominantly multiporphyrin arrays with tailor-made photophysical properties and well-defined three-dimensional structure display highly attractive synthetic targets. In contrast to the tremendous research interests in achiral porphyrin systems comparatively little attention has been paid to the synthesis and stereochemical characterization of chiral porphyrinoids. Especially optically active representatives with stereogenic porphyrin-aryl axes and intrinsically axially chiral oligoporphyrins have hardly been investigated so far. Due to a lack of suitably functionalized tetrapyrrolic precursors, structural motifs based on β-coupled subunits are particularly underrepresented. The fact that axially chiral porphyrins and their chiroptical properties have in general attracted only low attention can be ascribed to the extremely difficult accessibility of such compounds – especially in optically pure form. Be-cause of the nowadays rapidly increasing importance of chiral porphyrinoids, their synthesis and stereochemical analysis as well as an expansion of the – so far greatly limited – methodological repertoire for the stereoselective construction of chiral porphyrin derivatives is of highest interest. Thus, the aim of the present work was to establish efficient and widely applicable procedures for the construction of structurally complex axially chiral mono- and multiporphyrins with taylor-made chemical, physical, and chiroptical properties and well-defined spatial arrangement of the chromophores. In addition, different concepts for the stereoselective synthesis of axially chiral porphyrin systems were to be developed and comparatively evaluated for the first time. For all investigations the main focus concentrated on gaining detailed knowledge of stereochemical aspects and on closely studying the chiroptical behavior (e.g., by using modern HPLC hyphenation techniques) of the newly synthesized compounds. KW - Asymmetrische Synthese KW - CD-Spektroskopie KW - HPLC KW - HPLC-CD-Kopplung KW - HPLC-NMR-Kopplung KW - Organische Synthese KW - Chemische Synthese KW - Zirkulardichroismus KW - HPLC-CD coupling KW - HPLC-NMR coupling Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53377 ER - TY - THES A1 - Kirchwehm, Yvonne T1 - Untersuchungen zur Synthese aromatisch anellierter Triquinacene T1 - Investigations on the synthesis of aromatically annulated triquinacenes N2 - In dieser Arbeit wurde ein geeigneter Zugang zu TBTQ-Derivaten erarbeitet, der eine paarweise Funktionalisierung der aromatischen Positionen in direkter Nachbarschaft zum Triquinacen-Kern zulässt. Hierfür wurde sowohl die doppelte Cyclodehydratisierungsroute als auch die dreifache Cyclisierungsvariante zur Darstellung von Tribenzotriquinacenen dahingehend modifiziert, dass die Einführung der „ortho“-Substituenten bereits zu Beginn der Synthese mit den Edukten erfolgte, da eine nachträgliche Funktionalisierung der gewünschten Positionen am TBTQ aufgrund sterischer Faktoren nicht möglich ist. Es wurden unter anderem die ersten literaturbekannten „ortho“-substituierten TBTQ-Derivate erhalten und vollständig charakterisiert. Zur Erweiterung des aromatischen Systems wurden außerdem Benzodiphenanthrenotriquinacen-Vorstufen synthetisiert, die im Falle der doppelten Cyclodehydratisierungsroute Acenapthylen-Derivate lieferten. Benzodiphenanthrenotriquinacen konnte mit Hilfe der dreifachen Cyclisierungsvariante synthetisiert werden. Die Zielmoleküle sollen als Vorstufen für überbrückte aromatisch anellierte Triquinacene dienen. N2 - In this work a suitable reaction pathway for TBTQ-derivatives with geminate functionalization of the aromatic positions adjacent to the triquinacene core was developed. Therefore, the double cyclodehydration as well as the triple cyclization strategy for the synthesis of tribenzotriquinacenes were modified, so that the introduction of the „ortho“-substituents takes place as part of generating the starting material at the beginning of the synthetic scheme. The reason for this is that subsequent functionalization at the „ortho“-positions is impeded due to steric hindrance. Among other things the first “ortho”-substituted TBTQ-derivatives known in literature were synthesized and fully characterized. Furthermore, precursors for benzodiphenanthrenotriquinacene were synthesized in order to extend the aromatic periphery. The double cyclodehydration strategy provided acenaphthylene derivatives. However, Benzodiphenanthrenotriquinacene could be generated via triple cyclization strategy. The target molecules might serve as precursors for the formation of bridged aromatically annulated triquinacenes. KW - Triquinacenderivate KW - Aromatisch anellierte Triquinacene KW - „ortho“-substituierte Tribenzotriquinacene KW - Benzodiphenanthrenotriquinacen KW - gekrümmte Kohlenwasserstoffe KW - Aromatically annulated triquinacenes KW - „ortho“-substituted tribenzotriquinacenes KW - benzodiphenanthrenotriquinacene KW - curved hydrocarbons KW - Chemische Synthese KW - Kohlenwasserstoffe Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85088 ER - TY - THES A1 - Gehrold, Andreas Christian T1 - Synthese und stereochemische Eigenschaften von monomeren Henkelporphyrinen und deren Einsatzmöglichkeiten in di- und trimeren Systemen T1 - Synthesis and stereochemical properties of monomeric basket-handle porphyrins and their use in di- and trimeric arrays N2 - Tetrapyrrole sind nicht nur in natürlichen Systemen von herausragender Bedeutung, sondern haben sich im letzten Jahrhundert zu einem zentralen Forschungsgegenstand verschiedener Naturwissenschaften entwickelt. Chirale Vertreter sind, trotz ihrer Bedeutung in der Natur, hierbei nur am Rande untersucht worden. Im Rahmen der vorliegenden Arbeit wurde, ausgehend von p-Xylylen-verbrückten Porphyrinen, sogenannten Henkelporphyrinen, eine Vielzahl an chiralen Strukturen synthetisiert und stereochemisch untersucht. Die monomeren Vertreter waren abhängig vom Substitutionsmuster der Henkeleinheit achiral oder planar-chiral. Über eine kurze und effiziente Syntheseroute wurden die Grundkörper im Multigramm-Maßstab aufgebaut und anschließend sowohl strukturell modifiziert als auch funktionalisiert. Die chiralen Vertreter wurden mittels HPLC an chiraler Phase in die Enantiomere getrennt und mittels online-ECD-Spektroskopie wurden die ECD-Spektren im stopped-flow-Modus gemessen. Der Vergleich mit quantenchemisch berechneten ECD-Kurven erlaubte die sichere Zuordnung der Absolutkonfigurationen. Des Weiteren wurden die Monomere röntgenkristallographisch, UV-Vis-spektroskopisch und elektrochemisch eingehend untersucht. Ausgehend von den monomeren Vertretern wurden mittels direkter oxidativer Kupplung oder über Übergangsmetall-katalysierte Verfahren di- und trimere Systeme aufgebaut. Diese lagen als axial-, helikal- oder planar-chirale Strukturen vor. HPLC-ECD-Kopplung in Verbindung mit quantenchemischen Rechnungen erlaubte auch hier die Aufklärung der absoluten Stereostrukturen. Neben klassischen Porphyrin-Vertretern wurden im Rahmen dieser Arbeit erstmals Henkelchlorine durch OsO4-vermittelte Dihydroxylierung der Henkelporphyrine synthetisiert und vollständig charakterisiert. Außerdem gelang in Kooperation mit Prof. Brückner (UConn) die Aufklärung der Absolutkonfigurationen helikal-chiraler Indachlorine. Die Arbeit liefert insgesamt eine breite Plattform an chiralen Porphyrinoiden, die für weitere Untersuchungen zu Reaktivität und Struktur von größtem Interesse sind, sowie erste detaillierte Einblicke in die faszinierenden Eigenschaften dieser Substanzklasse. N2 - Tetrapyrroles are of outstanding importance not only in naturally occurring systems, but also they have become a central research topic during the last century. Yet, chiral representatives were, despite their importance in nature, only investigated marginally. This work deals with the syntheses and stereochemical investigations of a plethora of chiral Systems based on p-xylylene-bridged porphyrins, so called basket-handle porphyrins. The monomeric representatives were achiral or chiral only by difference of the substitution pattern of the handle unit. Via a short and efficient synthesis, the core motif was accessible in multi-gram quantities. Subsequent modifications as well as functionalizations were achieved. The chiral derivatives were resolved into their enantiomers by HPLC on a chiral phase and their ECD spectra were recorded online in the stopped-flow mode. By comparison with quantum-chemically obtained ECD curves the absolute configurations were established. Additionally, the monomers were characterized by X-ray crystallography, UV-Vis spectroscopy, and electrochemical methods. Starting from the monomers, a variety of di- and trimeric arrays was synthesized by direct oxidative coupling or by transition-metal catalyzed reactions. These systems were either helically, axially, or planar-chiral. HPLC-ECD coupling in combination with quantum-chemical calculations permitted the assignment of the absolute stereostructures. Besides the classical porphyrins, basket-handle chlorins were synthesized by OsO4-mediated dihydroxylation of the basket-handle porphyrins and their absolute configurations were established. Furthermore, in cooperation with Prof. Brückner (UConn) the absolute stereostructures of novel helically chiral Indachlorins was assigned. In summary, this work provides a broad variety of chiral porphyrinoids, which are ideal candidates for further investigations regarding their chemical reactivity and their structural features, and included first detailed insight into the fascinating properties of this class of compounds. KW - Porphyrin KW - Zirkulardichroismus KW - Stereochemie KW - Organische Synthese KW - Chemische Synthese KW - HPLC-ECD-Kopplung KW - Organische Synthese KW - Porphyrine KW - organic synthesis KW - porphyrin chemistry KW - HPLC-ECD-coupling KW - ECD-Spektroskopie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134048 ER - TY - THES A1 - Schreck, Maximilian T1 - Synthesis and Photophysics of Linear and Star-Shaped Oligomers of Squaraine Dyes T1 - Synthese und Photophysik von Linearen und Sternförmigen Squarain-Oligomeren N2 - In this thesis, the synthesis and photophysics of a great variety of squaraine dyes are presented. This variety is based on four parent squaraines containing either indolenine or quinoline heterocycles. By a suitable choice of the donor and acceptor unit, the optical properties can already be adapted to the properties desired on the stage of the monomer. To promote a further derivatisation of these dyes, diverse functional groups are attached to the monomers using transition metal-catalysed C-C coupling reactions. However, this has to be preceded by the synthesis of bromine-functionalised derivatives as a direct halogenation of squaraine dyes is not feasible. Therefore, the halogen function is already introduced in precursor molecules giving rise to a molecular building block system containing bromine-, boronic ester-, and alkyne-functionalised monomer units, which pave the way to a plethora of squaraine oligomers and polymers. The indolenine homopolymer pSQB-1 as well as the corresponding small molecular weight oligomers dSQB-1 and tSQB were synthesized applying Ni-mediated Yamamoto and Pd-catalysed Suzuki coupling methodologies, respectively. The motivation for this project relied on the fundamental investigations by Völker et al. on pSQB-V. A progressive red-shift of the lowest energy absorption maximum from the dimer to the polymer was observed in CHCl3 compared to the monomer. With increasing number of monomer units, the exciton coupling decreases from the dimer to the polymer. In addition, the shape of the absorption band manifold shows a strong dependence on the solvent, which was also observed by Völker et al. J-type aggregate behavior is found in chlorinated solvents such as CHCl3 and DCM, whereas H-type aggregates are formed in acetone. Temperature-dependent absorption studies in PhCN reveals a reversible equilibrium of diverse polymer conformers, which manifests itself in a gradual change from H-aggregate behavior to a mixture with a more pronounced J-aggregate behavior upon raising the temperature. It isassumed that both characteristic aggregate bands correlate in borderline cases with two polymer structures which can be assigned to a zig-zag and a helical structure. As no experimental evidence for these structures could hitherto be provided by NMR, TD-DFT computations on oligomers (22-mers) can reproduce very closely the characteristic features of the spectra for the two conformational isomers. The subsequent chapters are motivated by the goal to influence the optical properties through a control of the superstructure and thus of the intramolecular aggregate formation. On the one hand, bulky groups are implemented in the 3-position of the indolenine scaffold to provoke steric repulsion and thus favoring J-aggregate behavior at the expense of helical arrangements. The resulting homopolymer pDiPhSQB bearing two phenyl groups per indolenine exhibits J-type aggregate behavior with red-shifted absorption maxima in all considered solvents which is explained to be caused by the formation of elongated zig-zag structures. Furthermore, single-crystal X-ray analysis of monomer DiPhSQB-2-Br2 reveals a torsion of the indolenine moieties as a consequence of steric congestion. The twist of the molecular geometry and the resulting loss of planarity leads to a serious deterioration of the fluorescence properties, however a significant bathochromic shift of ca. 1 200 cm-1 of the lowest absorption band was observed compared to parent SQB, which is even larger than the shift for dSQB-1 (ca. 1 000 cm-1). On the other hand, a partial stiffening of the polymer backbone is attempted to create a bias for elongated polymer chains. In this respect, the synthetic approach is to replace every second biarylaxis with the rigid transoid benzodipyrrolenine unit. Despite a rather low average degree of polymerization < 10, exclusively red-shifted absorption maxima are observed in all solvents used. In order to complete the picture of intramolecular aggregates through the selective design of H-aggregates, a squaraine-squaraine copolymer was synthesised containing the classic cisoid indolenine as well as the cisoid quinoline building block. Taking advantage of the highly structure directing self-assembly character of the quinoline moiety, the copolymer pSQBC indeed showes a broad, blue-shifted main absorption band in comparison with the monomer unit dSQBC. The shape of the absorption band manifold solely exhibited a minor solvent and temperature dependence indicating a persistent H-aggregate behaviour. Hence, as a proof of concept, it is shown that the optical properties of the polymers (H- and J-aggregate) and the corresponding superstructure can be inherently controlled by an adequate design of monomer precursors. The last chapter of this work deals, in contrast to all other chapters, with intermolecular aggregates. It is shown that the two star-shaped hexasquarainyl benzenes hSQA-1 and hSQA-2 exhibit a strong propensity for self-organisation. Concentration- and temperature-dependent studies reveal a great driving force for self-assembly in acetone. While the larger hSQA-2 instantaneously forms stable aggregates, the aggregates of hSQA-1 shows a pronounced kinetic stability. Taking advantage of the kinetic persistency of these aggregates, the corresponding kinetic activation parameters for aggregation and deaggregation can be assessed. The absorption spectra of both hexasquarainyl benzenes in the aggregated state reveal some striking differences. While hSQA-1 features an intensive, very narrow and blue-shifted absorption band, two red-shifted bands are observed for hSQA-2, which are closely located at the monomer absorption. The very small bandwidth of hSQA-1 are interpreted to be caused by exchange narrowing and pointed towards highly ordered supramolecular aggregates. The concentration-dependent data of the two hexasquarainyl benzenes can be fitted to the dimer-model with excellent correlation coefficients, yielding binding constants in excess of 10^6 M-1, respectively. Such high binding constants are very surprising, considering the unfavourable bulky 3,3-dimethyl groups of the indolenine units which should rather prevent aggregation. Joint theoretical and NMR spectroscopic methods were applied to unravel the supramolecular aggregate structure of hSQA-1, which is shown to consist of two stacked hexasquarainyl benzenes resembling the picture of two stacked bowls. N2 - Im Rahmen dieser Arbeit wird die Synthese sowie photophysikalischen Untersuchungen einer Vielzahl von Squarainfarbstoffen präsentiert. Diese Vielfalt erwuchs aus vier monomeren Stammverbindungen, die auf Indolenin- bzw. Chinolin-Heterozyklen gründeten. Um die Derivatisierung der Monomere weiter voranzutreiben, werden diese durch geeignete funktionelle Gruppen unter der Verwendung von übergangsmetallkatalysierten C-C Kupplungsreaktionen chemisch modifiziert. Dieser geht jedoch die Synthese Brom-funktionalisierter Vorstufen voraus. So muss die Halogenfunktion bereits in den Vorläufermolekülen eingeführt werden, da eine selektive, direkte Halogenierung auf der Stufe des Squarains nicht möglich ist. Schlussendlich kann somit ein molekularer Baukasten entwickelt werden, der, bestückt mit Monomerbausteinen mit Brom-, Borester-, und Alkinfunktionen, den Weg zu diversen oligomeren und polymeren Squarainfarbstoffen ebnete. Das Indolenin Squarain Homopolymer pSQB-1, als auch die entsprechenden niedermolekularen Oligomerverbindungen dSQB-1 und tSQB wurden mittels der Ni-unterstützten Yamamoto bzw. Pd-katalysierte Suzuki Kupplung dargestellt. Die bereits durch Völker et al. erfolgten spektroskopischen Untersuchungen an pSQB-V werden im Rahmen dieser Arbeit fortgesetzt. Im Vergleich zum Monomer, zeigen das Dimer, Trimer und das Polymer in CHCl3 eine progressive Rotverschiebung der niedrigsten, intensivsten Absorptionsbande. Mit steigender Anzahl der SQB-Monomereinheiten nimmt die Exzitonenkopplung im Dimer bis hin zum Polymer ab. Wie auch bereits Völker et al. zeigen konnten, ist die Form der Absorption des Exzitonenbandes von pSQB-1 stark lösemittelabhängig. Während J-Aggregat ähnliches Verhalten in CHCl3 und DCM beobachtet wird, zeigt das Polymer in Aceton H-Aggregat ähnliches Verhalten. Temperaturabhängige Absorptionsmessungen in PhCN zeigen ein reversibles thermodynamisches Gleichgewicht von verschiedenen Polymerstrukturen, welches sich mit steigender Temperatur durch einen sukzessiven Übergang von H-Aggregat zu einer Mischung mit mehr J-Aggregat Charakter manifestiert. Es wird angenommen, dass das Auftreten der charakteristischen Aggregatsbanden im Grenzfall mit zwei Polymerkonformeren korreliert, die einer Zick-Zack- und einer Helix-Struktur entsprechen. Da hierfür keine experimentellen Beweise durch NMR bis dato vorliegen, wurden TD-DFT Kalkulationen an Oligomereinheiten (22-er) durchgeführt, die die wesentlichen Merkmale der Absorptionsspektren der zwei Konformere reproduzieren konnten. Die anschließenden Kapitel erwuchsen aus der Motivation heraus, die optischen Eigenschaften der Polymere über die Kontrolle der Strukturbildung und somit der intramolekularen Aggregatsbildung zu beeinflussen. Um einerseits J-Aggregat Verhalten zu provozieren wird zunächst der Ansatz verfolgt, durch sterisch anspruchsvolle Gruppen in der 3-Position des Indolenin Gerüsts, den Kollaps zu helikalen Stukturen zu vermeiden. Das resultierende Homopolymer pDiPhSQB mit zwei Phenylgruppen pro Indolenin Einheit zeigt in allen untersuchten Lösemitteln bathochrom verschobene Absorptionsmaxima, was mit der Ausbildung von ausschließlich ausgedehnten Zick-Zack-Ketten begründet werden. Darüber hinaus zeigte die Einkristall-Röntgenstrukturanalyse des Monomers DiPhSQB-2-Br2 als Konsequenz der sterischen Überfrachtung eine Torsion des Indolenin Gerüsts. Die Verdrillung der Molekülgeometrie und der daraus resultierende Verlust an Planarität, führt zu einer erheblichen Verschlechterung der Fluoreszenzeigenschaften, jedoch wird eine signifikante Rotverschiebung der Monomerbande von ca. 1 200 cm-1 im Vergleich zu SQB beobachtet, welche sogar größer als die für dSQB-1 ist. Zum anderen ergibt der Ansatz der partiellen Versteifung des Polymerrückgrades ebenfalls die Ausbildung von ausgedehnten Polymerketten begünstigen. Dieser Ansatz wird insofern verfolgt, als dass jede zweite Biarylachse zwischen zwei Monomereinheiten in pSQB-1 durch eine rigide transoide Benzodipyrrolenin Brücke ersetzt wird. Trotz eines eher geringen durchschnittlichen Polymerisationsgrades von < 10 kann dennoch eine Rotverschiebung der niederenergetischsten Absorptionsbande in allen Lösemitteln beobachtet werden. Um das Bild der intramolekularen Aggregate zu vervollständigen, wird das gezielte Design von H-Aggregaten verfolgt. Hierfür wurde ein Squarain-Squarain Copolymer synthetisiert, das zum einen aus dem klassischen cisoiden Indolenin und zum anderen aus dem cisoiden Chinolin Squarain aufgebaut ist. Diesbezüglich will man sich die Triebkraft des Chinolin Bausteins für Aggregation als strukturdirigierende Komponente zu Nutze machen, um helikale Konformationen der Polymerstränge zu erzeugen. Das Copolymer pSQBC zeigt in der Tat eine verbreiterte, hypsochrom verschobene Hauptabsorptionsbande im Vergleich zur Monomereinheit dSQBC. Die Form der Absorption des Exzitonenbandes zeigt eine geringe Lösemittelabhängigkeit, die ebenfalls nur marginal durch die Temperatur beeinflusst werden kann. Schlussendlich deuten diese Befunde auf ein stark-ausgeprägtes H-Aggregat ähnliches Verhalten hin, was die zu anfangs formulierte These belegt, dass sich die optischen Eigenschaften der Polymere (H- und J-Aggregate) und deren Strukturbildung durch ein adäquates Moleküldesign der Monomerbausteine kontrollieren lassen. Das letzte Kapitel dieser Arbeit stand im Gegensatz zu den vorherigen Kapiteln ausschließlich im Fokus von intermolekularen Aggregaten. Die Squaraine hSQA-1 und hSQA-2 neigen, in ein sternförmiges Hexaarylbenzol-Gerüst gebettet, zur Selbstorganisation. Konzentration- und temperaturabhängige Studien der beiden synthetisierten Hexasquarainyl-Benzole zeigen eine starke Triebkraft zur Aggregation in Aceton. Während hSQA-2 instantan thermodynamisch stabile Aggregate bildet, offenbart hSQA-1 Aggregate eine ausgeprägte kinetische Stabilität. Dies kann man sich zu Nutze machen und die kinetischen Aktivierungsparameter der Aggregation und Deaggregation zu bestimmen. Die Absorptionsspektren der beiden Hexasquarainyl-Benzole im aggregierten Zustand zeigen extreme Unterschiede auf. Während hSQA-1 eine intensive, sehr schmale und stark hypsochrom verschobene Bande zeigt, beobachtet man für das größere Hexasquarainyl-Benzol zwei bathochrom verschobene Banden, die allerdings energetisch sehr nahe der Monomerbande lokalisiert sind. Die sehr geringe Halbwertsbreite der Aggregatsbande in hSQA-1 wird durch die sog. Austauschverschmälerung erklärt und deutet auf hochgeordnete supramolekulare Aggregate hin. Die konzentrationsabhängigen Messdaten der beiden Chromophore konnten sehr gut mit Hilfe des Dimer-Modells angepasst werden, welches für beide Systeme eine hohe Bindungskonstante von über 10^6 M-1 ergab. In Anbetracht der Tatsache, dass die raumgreifenden 3,3-Dimethylgruppen im Indoleningerüst extrem hinderlich für den Aggregationsprozess sind, ist die starke Triebkraft zur Selbstorganisation, welche sich in den hohen Bindungskonstanten niederschlägt, äußerst bemerkenswert. Theoretische Modellierungen und Rechnungen in Kombination mit NMR-spektroskopischen Untersuchungen von hSQA-1 ergeben eine Aggregatsstruktur aus zwei sich stapelten Hexasquarainylbenzolmonomeren, die dem Bild zweier gestapelter Schüsseln entspricht. KW - Squaraine KW - Oligomere KW - Supramolekulare Chemie KW - Squaraine Dyes KW - Oligomers and Polymers KW - J- and H-Aggregates KW - Helix- and Zig-Zag-Conformers KW - Supramolecular Chemistry KW - Squarain Farbstoffe KW - J- and H-Aggregate KW - Helix- and Zick-Zack-Konformere KW - Supramolekulare Chemie KW - Helicität KW - Chemische Synthese KW - Chemische Reaktion Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174272 ER - TY - THES A1 - Buschmann, Rachel Abigail T1 - Synthesis of annulated pi-systems based on a tribenzotriquinacene core T1 - Synthese von annellierten pi-Systemen auf Basis eines Tribenzotriquinacenkerns N2 - The aim of this work was the selective functionalisation of tribenzotriquinacene (TBTQ) in order to extend the aromatic system and tune the electronic properties. The synthesised molecules could be starting materials for a model system of a defective graphene fragment. The “triple cyclisation pathway” by Hopf et al. was adapted and fluorinated tribenzotriquinacenes were synthesised for the first time. Phenanthrene groups were also introduced in other model systems and the crystal structures of phenanthrene functionalised TBTQs were compared with the parent molecules. In addition, the arrangement of TBTQ and centro methyl functionalised TBTQ was investigated on a Ag(111) surface for the first time using scanning transmission microscopy (STM). Different arrangements were observed, depending on the coverage of the surface. The insights gained about the interaction between TBTQs as well as their synthesis provide a foundation for further work and potential applications as components in organic electronic devices. N2 - Das Ziel diese Arbeit war die gezielte Funktionalisierung von Tribenzotriquinacen (TBTQ), um dessen aromatisches System zu erweitern und die elekronischen Eigenschaften zu verändern. Diese Zielmoleküle könnten sich als Ausgangsmoleküle für ein Modellsystem für ein gewölbtes Graphenfragment eignen. Die „dreifache Cyclisierungsroute“ von Hopf et al. wurde hierfür adaptiert und es wurden erstmals fluorierte Tribenzotriquinacene synthetisiert. In anderen Modellsystemen wurden Phenanthren-Einheiten eingeführt und die Kristallstrukturen mit dem TBTQ-Stammsystem verglichen. Zusätzlich wurde die Anordnung von TBTQ und centro-methyliertem TBTQ zum ersten Mal auf eine Ag(111)-Oberfläche mittels Rastertunnelmikroskopie (STM) untersucht. Es konnte gezeigt werden, dass neben der zentralen Methylgruppe auch der Grad der Oberflächenabdeckung unterschiedliche Anordnung der Moleküle auf der Oberfläche zur Folge hatte. Die aus dieser Arbeit gewonnenen Erkenntnisse über die Wechselwirkungen zwischen TBTQs sowie deren Synthese dienen als Grundlage für weitere Arbeiten und potenzielle organische Bausteine für elektronische Anwendungen. KW - Triquinacenderivate KW - Chemische Synthese KW - Aromatically annulated triquinacenes KW - Aromatisch anellierte Triquinacene KW - triquinacene derivatives KW - curved hydrocarbons KW - gekrümmte Kohlenwasserstoffe Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193491 ER - TY - THES A1 - Toksabay, Sinem T1 - Synthesis and on surface self assembly properties of pi extended tribenzotriquinacenes T1 - Synthese und selbstorganisierende Eigenschaften von pi-erweitertem Tribenzotriquinacenen an der Oberfläche N2 - Tribenzotriquinacene (TBTQ) is a polycyclic aromatic framework with a particularly rigid, C3v symmetrical, bowl-shaped core bearing three mutually fused indane wings. It has been discussed as a defect center for a nanographene by Kuck and colleagues. Therefore, extended TBTQ structures are promising models for saturated defect structures in graphene and graphene like molecules and could be used to investigate the role of defects for the electronic properties of graphene. With this motivation, three different pi-extended TBTQ derivatives have been synthesized in this work. Several different Scholl reaction conditions were tried to obtain fully annulated product of hexaphenyl substituted TBTQ. The desired benzannulated TBTQ derivative could not be obtained due to unfavourable electron density in the respective positions of the molecule and increased reactivity of the bay position of the precursor. As an another method for benzannulation is the on-surface synthesis of graphene flakes and can be carried out using electron beams e.g. in a tunneling microscope (STM). According to our previous research, the parent system TBTQ and centro-methyl TBTQ on silver and gold surfaces showed that the gas phase deposition of these molecules gives rise to the formation of highly ordered two-dimensional assemblies with unique structural features. This shows the feasibility for the formation of defective graphene networks starting from the parent structures. Therefore, the same deposition technique was used to deposit Me-TBTQ(OAc)3Ph6, and investigate the molecular self-assembly properties directly on the surface of Cu (111). In summary, the substrate temperature dependent self-assembly of Me-TBTQ(OAc)3Ph6 molecules on Cu(111), shows the following evolution of orientations. At room temperature, molecules form dimers, which construct a higher-coverage honeycomb lattice. Furthermore, one of the acetyl group located in the bay positions of the TBTQ core is cleaved and the remaining two induce the metal-molecule interaction. It was presumed that by increasing the temperature to 393 K, the remaining acetyl and methyl groups would beeliminated from the molecular structure.In addition, the smaller TBTQ-Ph6 molecules preferably lie flat on Cu(111) crystal and allowing the molecules to settle into a C3-symmetry and form a dense hexagonal structure. N2 - Tribenzotriquinacen (TBTQ) ist eine polyzyklische aromatische Verbindung mit einem besonders starren, C3v-symmetrischen, schalenförmigen Kern, der drei anellierte Indan-Flügel trägt. Es wurde von Kuck und Kollegen als Defektzentrum für Nanographen untersucht. Daher sind erweiterte TBTQ-Strukturen vielversprechende Modelle für gesättigte Defektstrukturen in Graphen und graphenähnlichen Molekülen, die dazu verwendet werden können, um die Rolle Defekten auf die Ausprägung der elektronischen Eigenschaften von Graphen zu untersuchen. Mit dieser Motivation wurden in dieser Arbeit drei verschiedene TBTQ-Derivate mit erweitertem -System synthetisiert. Um im Anschluss eine vollständige Annellierung und damit Konjugation des p-Systems zu erreichen, wurden verschiedene Scholl-Reaktionen getestet, um das dreifach anellierte Produkt aus hexaphenylsubstituiertem TBTQ zu erhalten. Das gewünschte benzannulierte TBTQ-Derivat konnte aufgrund der relativ geringen Elektronendichte an den Annellierungspositionen und der erhöhten Reaktivität der Bay-Positionen des Moleküls nicht erhalten werden. Eine weitere Möglichkeit zur Annellierung von Nanographenen besteht in der On-Surface-Synthese. Diese kann mit Elektronenstrahlen z.B. in einem Rastertunnelmikroskop (STM) durchgeführt werden. Nach unseren früheren Untersuchungen, hochauflösende STM-Experimente mit dem Stammsystem TBTQ und centro-methyl TBTQ auf Silber- und Goldoberflächen, dass die Gasphasenabscheidung dieser Moleküle zur Bildung hochgeordneter zweidimensionaler Assemblierte mit einzigartigen strukturellen Eigenschaften führt. Dies zeigt die Möglichkeit zur Bildung von defekthaltigen Graphen-Netzwerken ausgehend von den Stammsystemen. Daher wurde hier die gleiche Abscheidungstechnik verwendet, um für Me-TBTQ(OAc)3Ph6 die molekulare Selbstanordnung auf der Oberfläche von Cu(111) untersuchen. Zusammenfassend zeigt die Selbstorganisation von Me-TBTQ(OAc)3Ph6 auf Cu(111) eine ausgeprägte Temperaturabhängigkeit. Die Moleküle bilden bei 363 K ein höheres Wabengitter aus. Außerdem wird eine der Acetylgruppen, die sich in den Bay-Positionen des TBTQ-Kerns befinden, abgespalten und die verbleibenden Gruppen wechselwirken mit der Metalloberfläche. Daher stehen sich die Molekülschalen als einander zugewandte Halbkugeln gegenüber. Es wird vermutet, dass durch die Erhöhung der Temperatur auf 393 K die verbleibenden Acetyl- und Methylgruppen aus der Molekülstruktur eliminiert werden. Außerdem liegen die kleineren TBTQ-Ph6-Moleküle bevorzugt flach auf dem Cu (111) -Kristall, so dass sich die Moleküle in der C3-Symmetrie anordnen und eine dichte hexagonale Struktur bilden KW - Triquinacenderivate KW - Aromatisch anellierte Triquinacene KW - Aromatically annulated triquinacenes KW - Chemische Synthese KW - gekrümmte Kohlenwasserstoffe KW - curved hydrocarbons KW - triquinacene derivatives KW - on surface self-assembly Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245734 ER -