TY - THES A1 - Wagenhäuser [geb. Vonhausen], Yvonne T1 - Thermodynamic Investigations on the Dimerization and Anti-Cooperative Self-Assembly of Dipolar Merocyanines T1 - Thermodynamische Untersuchungen zur Dimerisierung und anti-kooperativen Selbstassemblierung von dipolaren Merocyaninen N2 - Dipolar merocyanines are very attractive supramolecular building blocks, as they combine interesting functional properties with strong, directional intermolecular interactions. The pyridine dioxocyano-pyridine (PYOP) chromophore (Chapter 2.2), used in this thesis, stands out because of its exceptionally high ground state dipole moment (g ~ 17 D), in combination with the option to retain good solubility also in unpolar solvents, by decoration with solubilizing groups. The reliable binding motif of anti-parallel -stacking due to dipole-dipole interactions has allowed the design of molecular building blocks that form assemblies of predictable geometry. The intense unstructured charge transfer UV/Vis absorption band (eg ~ 10.7 D) is a result of the dominant contribution of the zwitterionic resonance structure which brings the PYOP chromophore just beyond the cyanine limit in solvents of low polarity (c2 = 0.60, 1,4 dioxane). The high sensitivity of the S0 – S1 UV/Vis absorption band to the environment manifests itself in a pronounced negative solvatochromism and strong H-type exciton coupling within -stacked PYOP assemblies. In accordance with the classical molecular exciton theory, an increasing hypsochromic shift of the dominant absorption band of these H aggregates can be observed as the stack size increases up to about six chromophores, where it levels out at about max ~ 440 nm (CHCl3). This allows a uniquely simple estimation of the number of interacting chromophores within the self-assembled structure from a single UV/Vis absorption spectrum of an aggregate. The defined and well investigated PYOP dimer formation was employed in this thesis to probe the applicability and limitations of concentration-, temperature-, and solvent-dependent self-assembly studies (Chapter 3). Straightforward theoretical models to evaluate datasets of concentration-, temperature-, and solvent-dependent UV/Vis absorption by nonlinear regression analysis were derived for the case of dimer formation (Chapter 2.1). Although the dimer model is well known and widely applied in literature, this detailed derivation is helpful to understand assumptions and potential problems of the different approaches for the determination of thermodynamic parameters. This helps to decide on the most appropriate method to analyse a system of interest. In this regard it should be noted that covering a large portion of the self-assembly process with the experimental data is a prerequisite for the accuracy of the analysis. Additionally, many of the insights can also be transferred to other self-assembly systems like supramolecular polymerization or host-guest interactions. The concentration-dependent analysis is the most straightforward method to investigate self-assembly equilibria. No additional assumptions, besides mass balance and mass action law, are required. Since it includes the least number of parameters (only K, if M/D are known), it is the most, or even only, reliable method, to elucidate the self-assembly mechanism of an unknown system by model comparison. To cover a large concentration range, however, the compound must be soluble enough and generally sample amounts at least in the low mg scale must be available. The temperature-dependent analysis has the advantage that all thermodynamic parameters G0, H0 and S0 can be obtained from a single sample in one automated measurement. However, the accessible temperature-range is experimentally often quite limited and dependent on the solvent. For systems which do not show the transition from monomer to aggregate in a narrow temperature range, as given for, e.g., cooperative aggregation or processes with a high entropy contribution, often not the entire self-assembly process can be monitored. Furthermore, the assumptions of temperature-independent extinction coefficients of the individual species as well as temperature-independent H0 and S0 must be met. Monte Carlo simulations of data sets demonstrated that even minor changes in experimental data can significantly impact the optimized values for H0 and S0. This is due to the redundancy of these two parameters within the model framework and even small thermochromic effects can significantly influence the results. The G0 value, calculated from H0 and S0, is, however, still rather reliable. Solvent-dependent studies can often cover the entire self-assembly process from monomeric (agg = 0) to the fully aggregated state (agg = 1). However, for dyes with strong solvatochromic effects, such as the dipolar merocyanines investigated in this thesis, the results are affected. Also, the assumption of a linear relation of the binding energy G0 and the fraction of denaturating solvent f, which is based on linear free energy relationships between G0 and the solvent polarity, can lead to errors. Especially when specific solvent effects are involved. For the evaluation of experimental data by nonlinear regression, general data analysis software can be used, where user-defined fit models and known parameters can be implemented as desired. Alternatively, multiple specialized programs for analysing self-assembly data are available online. While the latter programs are usually more user-friendly, they have the disadvantage of being a “black box” where only pre-implemented models can be used without the option for the user to adapt models or parameters for a specific system. In Chapter 3 comprehensive UV/Vis absorption datasets are presented for the dimerization of merocyanine derivative 1 in 1,4-dioxane, which allowed for the first time a direct comparison of the results derived from concentration-, temperature-, and solvent-dependent self-assembly studies. The results for the binding constant K and corresponding G0 from the concentration- and temperature-dependent analysis were in very good agreement, also in comparison to the results from ITC. For the temperature-dependent analysis, though, multiple datasets of samples with different concentration had to be evaluated simultaneously to cover a meaningful part of the self-assembly process. Furthermore, a significant dependence of the optimized parameters H0 and S0 on the wavelength chosen for the analysis was observed. This can be rationalized by the small thermochromic shifts of both the monomer and the dimer UV/Vis absorption band. The results from the solvent-dependent evaluation showed the largest deviation, as expected for the highly solvatochromic merocyanine dye. However, even here by evaluation at 491 and 549 nm the deviation for G0 was only 2.5 kJ mol1 (9%) with respect to the results from the concentration-dependent analysis (G0 = 29.1 kJ mol1). Thus, despite the strong solvatochromism of the dipolar chromophore, it can still be considered a reliable method for estimating the binding strength. Furthermore, multiple repetitions of the concentration-, temperature-, and solvent-dependent studies provided insight into the reproducibility of the results and possible sources of experimental errors. In all cases, the deviations of the results were small (G0 < 0.4 kJ mol1) and within the same range as the fit error from the nonlinear regression analysis. The insights from these studies were an important basis for the in-depth investigation of a more complex supramolecular system in Chapter 4, as a single method is often not enough to capture the full picture of a more complicated self-assembly process. To elucidate the anti-cooperative self-assembly of the chiral merocyanine 2, a combination of multiple techniques had to be applied. Solvent-dependent UV/Vis absorption studies in CH2Cl2/MCH mixtures showed the step-wise assembly of the merocyanine monomer (max(M) = 549 nm, CH2Cl2) to first a dimer (max(D) = 498 nm, CH2Cl2/MCH 15:85) by dipole-dipole interactions, and then a -stacked higher aggregate (max(H) = 477 nm, MCH), with pronounced H-type coupling. The thermodynamic evaluation of this data, however, suffered from the severe solvatochromism, especially of the monomeric species (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Therefore, concentration-dependent studies were performed at three different temperatures (298, 323, 353 K) to elucidate the self-assembly mechanism and determine reliable thermodynamic parameters. The studies at elevated temperatures were hereby necessary, to obtain experimental data over a larger agg--range. Due to the pronounced difference in the thermodynamic driving force for dimerization and higher aggregate formation (KD/K5 = 6500) a concentration range exists in MCH where almost exclusively the dimer species of 2 is present, before further self-assembly by dispersion interactions occurs. Therefore, the data could be evaluated independently for the two self-assembly steps. The self-assembly of dimers into the higher aggregate could not be described by the isodesmic model but was fitted satisfactorily to a pentamer model. This rather small size of about ten -stacked PYOP chromophores was, furthermore, consistently indicated by AFM, VPO and DOSY NMR measurements. Based on 1D and 2D NMR data as well as the strong bisignate CD signal of the higher aggregate in combination with TD-DFT calculations, a P-helical stack is proposed as its structure. The small size can be rationalized by the anti-cooperative self-assembly mechanism and the sterical demand of the solubilizing trialkoxyphenyl and the chiral tetralin substituents. Additionally, the aliphatic shell formed by the solubilizing chains around the polar chromophore stack, can account for the exceptionally high solubility of 2 in MCH (> 15 mg mL1). These combined studies of the self-assembly process enabled the identification of suitable conditions for the investigation of fluorescence properties of the individual aggregate species. Aggregation-induced emission enhancement was observed for the almost non-emissive monomer (Fl(M) = 0.23%), which can be rationalized by the increasing rigidification within the dimer (Fl(D) = 2.3%) and the higher aggregate (Fl(H) = 4.5%). The helical chirality of the PYOP decamer stack, furthermore, gave rise to a strong CPL signal with a large glum value of 0.011. The important conclusion of this thesis is that the temperature- and solvent-dependent analyses are valid alternatives to the classical concentration-dependent analysis to determine thermodynamic parameters of self-assembly equilibria. Although, for a specific supramolecular system, one approach might be favourable over the others for a variety of reasons. The experimental limitations often demand a combination of techniques to fully elucidate a self-assembly process and to gain insights in the aggregate structure. The anti-cooperative merocyanine self-assembly, which was described here for the first time for the PYOP merocyanine 2, is no exception. Besides the interest in the merocyanine assemblies from a structural and functional point of view, the insights gained from the presented studies can also be transferred to other self-assembly systems and be a guide to find the most appropriate analysis technique. N2 - Dipolare Merocyanine sind sehr attraktive supramolekulare Bausteine, da sie interessante funktionale Eigenschaften mit starken, gerichteten zwischenmolekularen Wechselwirkungen vereinen. Der Pyridin-dioxocyano-pyridin (PYOP)-Chromophor (Kapitel 2.2), welcher in dieser Arbeit verwendet wurde, zeichnet sich durch sein besonders starkes Grundzustands-dipolmoment (g ~ 17 D) aus, in Kombination mit der Möglichkeit durch Funktionalisierung mit löslichkeitsvermittelnden Gruppen dennoch gute Löslichkeit zu bewahren. Das zuverlässige Bindungsmotiv der durch Dipol-Dipol Wechselwirkungen anti-parallel  gestapelten Merocyanine ermöglicht es, gezielt molekulare Bausteine zu entwerfen, welche sich zu Strukturen von vorhersagbarer Geometrie zusammenlagern. Der dominante Beitrag der zwitterionischen Resonanzstruktur führt zu einer intensiven, unstrukturierten Charge-Transfer UV/Vis-Absorptionsbande (eg ~ 10.7 D) und bringt den PYOP Chromophor leicht jenseits des Cyanin-Limits in unpolaren Lösungsmitteln (c2 = 0.60, 1,4-Dioxan). Die Sensitivität der S0 S1 UV/Vis-Absorptionsbande gegenüber der Umgebung zeigt sich in der ausgeprägten negativen Solvatochromie und einer starken H artigen excitonischen Kopplung in -gestapelten Aggregaten. In Übereinstimmung mit klassischer Excitonen-Theorie kann eine zunehmende hypsochrome Verschiebung der dominanten Absorptionsbande mit zunehmender Größe der H-Aggregate beobachtet werden, bis bei etwa sechs Chromophoren und max ~ 440 nm ein Plateau erreicht wird. Dies ermöglicht eine einmalig einfache Abschätzung, der Anzahl an wechselwirkenden Chromophoren innerhalb einer Aggregatstruktur, basierend auf einem einzigen UV/Vis-Absorptionsspektrum. Das definierte und gut untersuchte Beispiel des PYOP-Dimers wurde in dieser Arbeit verwendet, um die Anwendbarkeit und die Grenzen von konzentrations-, temperatur- und lösungsmittelabhängigen Aggregationsstudien auszutesten (Kapitel 3). Theoretische Modelle zur thermodynamischen Auswertung von konzentrations-, temperatur- und lösungsmittelabhängigen Studien mittels nichtlinearer Regression wurden für das Beispiel der Dimerisierung hergeleitet (Kapitel 2). Obwohl das Dimer-Modell literaturbekannt ist, ist diese detaillierte Herleitung hilfreich, um die Annahmen zu verstehen, die dem Modell zugrunde liegen. So können potenzielle Problemquellen der verschiedenen Methoden erkannt und die geeignetste Methode zur Bestimmung der thermodynamischen Parameter für ein bestimmtes System ausgewählt werden. Hierbei sollte man beachten, dass es sich für die Aussagekraft der Analyse klar als zuträglich erwiesen hat, wenn ein möglichst großer Bereich des Aggregationssprozesses von den experimentellen Daten abgedeckt werden kann. Viele der hier gewonnen Erkenntnisse lassen sich auch auf andere Systeme wie supramolekulare Polymere oder Wirt-Gast-Komplexe übertragen. Die konzentrationsabhängige Analyse ist die direkteste Methode, um ein supramolekulares Gleichgewicht zu untersuchen. Sie erfordert keine zusätzlichen Annahmen, außer dem Massenerhalt und dem Massenwirkungsgesetz. Da das konzentrationsabhängige mathematische Modell die wenigsten Parameter enthält (nur K, wenn M/D bekannt), ist es die zuverlässigste, wenn nicht sogar die einzig zuverlässige, Methode, um den Aggregationsmechanismus durch einen Vergleich der experimentellen Daten mit verschiedenen Modellen aufzuklären. Allerdings muss die zu untersuchende Verbindung hierbei löslich genug sein, damit ein großer Teil des Aggregationsprozesses in den Studien abgebildet werden kann und es werden üblicherweise Substanzmengen im niedrigen mg Bereich benötig. Die temperaturabhängige Analyse hat den Vorteil, dass alle thermodynamischen Parameter G0, H0 und S0 in einer einzigen automatisierten Messung einer einzelnen Probe erhalten werden können. Allerdings ist der experimentell zugängliche Temperaturbereich oft sehr eingeschränkt und abhängig von dem verwendeten Lösungsmittel. Für Systeme, bei denen der Übergang vom Monomer zum Aggregat nicht in einem engen Temperaturbereich erfolgt, z.B. aufgrund von Kooperativität oder einem großen Entropie-Beitrag, ist es oft nicht möglich den gesamten Aggreationsprozess abzubilden. Zusätzlich sollten die Annahmen, dass sowohl die Extinktionskoeffizienten der einzelnen Spezies sowie H0 und S0 temperaturunabhängig sind, zutreffen. Mittels Monte Carlo Simulationen konnte gezeigt werden, dass selbst kleine Änderungen in den experimentellen Daten die erhaltenen Werte von H0 und S0 deutlich beeinflussen können. Dies liegt daran, dass die beiden Parameter im mathematischen Modell nicht völlig unabhängig voneinander sind. Selbst geringfügige thermochrome Veränderungen können daher die Ergebnisse für H0 und S0 beeinflussen. Die G0-Werte, die sich aus H0 und S0 berechnen lassen, sind allerding dennoch recht zuverlässig. Mittels lösungsmittelabhängiger Studien ist es oft am einfachsten, den vollständigen Prozess vom Monomer (agg = 0) bis zum Aggregat (agg = 1) abzubilden. Für stark solvatochrome Farbstoffe wie die hier untersuchten dipolaren Merocyanine werden die Ergebnisse allerdings deutlich verfälscht. Auch die Annahme einer linearen Abhängigkeit der Bindungsenergie G0 und der Lösungsmittelzusammensetzung f, die auf linearen Freie-Energie Beziehungen zwischen G0 und der Lösungsmittelpolarität beruhen, kann zu Abweichungen führen, vor allem, wenn spezifische Lösungsmitteleffekte involviert sind. Die Auswertung der experimentellen Daten erfolgt mittels nichtlinearer Regression. Hierfür können diverse Datenauswertungsprogramme genutzt werden, in die sich benutzerdefinierte Modelle inklusive bekannter Parameter implementieren lassen. Alternativ gibt es auch eine Auswahl von spezialisierten Programmen zur Auswertung von Aggregationsdaten im Internet. Diese sind zwar deutlich benutzerfreundlicher, aber auch „Black Boxes“, deren voreingestellte Modelle und Parameter in der Regel nicht vom Nutzer für ein spezielles System angepasst werden können. In Kapitel 3 wurden umfangreiche UV/Vis-Absorptionsstudien für die Dimerisierung von Merocyanin 1 in 1,4-Dioxan vorgestellt, welche zum ersten Mal einen direkten Vergleich zwischen den Ergebnissen von konzentrations-, temperatur- und lösungsmittelabhängigen Aggregationsstudien ermöglichten. Die Ergebnisse für die Bindungskonstante K und dem dazugehörigen G0-Wert aus der konzentrations- und temperaturabhängigen Analyse stimmen mit den Ergebnissen der isothermalen Titrationskalorimetrie (ITC) überein. Bei der temperaturabhängigen Auswertung mussten allerdings mehrere Datensätze von Proben mit unterschiedlichen Konzentrationen zusammen ausgewertet werden, um einen aussagekräftigen Bereich des Aggregationsprozesses abzudecken. Außerdem wurde eine deutliche Abhängigkeit der Ergebnisse für H0 und S0 von der Wellenlänge festgestellt, die für die Auswertung gewählt wurde. Dies liegt an der kleinen thermochromen Verschiebung der Monomer- und Dimer-Absorptionsbande. Die Ergebnisse der lösungsmittelabhängigen Studien zeigten, wie für den stark solvatochromen Chromophor erwartet, die größte Abweichung. Allerdings beträgt die Abweichung für G0 selbst hier nur 2.5 kJ mol1 (9%), bei Auswertung bei 491 und 549 nm, im Vergleich zur konzentrationsabhängigen Auswertung (G0 = 29.1 kJ mol1). Trotz der ausgeprägten Solvatochromie sind die lösungsmittelabhängigen Studien also geeignet, um die Bindungsstärke eines Systems abzuschätzen. Mehrmalige Wiederholung der Experimente erlaubte eine Abschätzung der Reproduzierbarkeit der Ergebnisse und möglicher Fehlerquellen. Die Ergebnisse schwankten hierbei in allen Fällen nur geringfügig (G0 < 0.4 kJ mol1) und in der gleichen Größenordnung wie der Fehler der nichtlinearen Regression. Die Erkenntnisse aus diesen Studien waren eine wichtige Grundlage für die Untersuchung eines komplexeren supramolekularen Systems in Kapitel 4. Eine einzelne Methode ist oft nicht ausreichend, um einen mehrstufigen Aggregationsprozess vollständig aufzuklären, und auch zur Aufklärung der anti-kooperativen Aggregation des chiralen Merocyanins 2, wurde eine Kombination verschiedener Techniken angewandt. Lösungsmittelabhängige UV/Vis-Absorptionsstudien in CH2Cl2/MCH Mischungen zeigten die stufenweise Zusammenlagerung der Merocyanin-Monomere (max(M) = 549 nm, CH2Cl2) zuerst durch Dipol-Dipol Wechselwirkungen zu Dimeren (max(D) = 498 nm, CH2Cl2/MCH 15:85) und dann zu größeren -Stapeln (max(H) = 477 nm, MCH) mit ausgeprägter H-Kopplung. Die thermodynamische Auswertung dieser Daten leidet allerdings unter der ausgeprägten Solvatochromie, vor allem der Monomer-Spezies (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Daher wurden stattdessen konzentrationsabhängige Studien bei verschiedenen Temperaturen durchgeführt, um den Aggregationsmechanismus aufzuklären und verlässliche thermodynamische Parameter zu bestimmen. Die Studien bei höheren Temperaturen waren notwendig, um mit den experimentellen Daten einen größeren agg--Bereich abdecken zu können. Aufgrund des ausgeprägten Unterschieds in der thermodynamischen Triebkraft für die Dimerisierung und die Bildung höherer Aggregate (KD/K5 = 6500) gibt es in MCH einen Konzentrationsbereich, in dem fast ausschließlich die dimere Spezies vorhanden ist, bevor eine weitere Zusammenlagerung durch Dispersionswechselwirkungen erfolgt. Dies ermöglichte eine unabhängige Auswertung der Daten für die beiden Aggregationsschritte. Der Zusammenschluss von Dimeren zum höheren Aggregat ließ sich nicht durch das isodesmische Modell beschreiben, sondern durch ein Pentamer-Modell. Diese Größe von etwa zehn -gestapelten PYOP-Chromophoren wurde außerdem durch AFM-, VPO- und DOSY-NMR-Messungen bestätigt. Basierend auf 1D- und 2D-NMR-Daten und dem CD-Signal des höheren Aggregats mit positivem Cotton-Effekt in Kombination mit TD-DFT Rechnungen, wurde ein P-helikaler -Stapel als Struktur angenommen. Die geringe Größe lässt sich durch den anti-kooperativen Aggregationsmechanismus und den sterischen Anspruch der lösungsvermittelnden Trialkoxyphenyl- und der chiralen Tetralin-Substituenten erklären. Die durch diese Substituenten ausgebildete aliphatische Hülle um den polaren Chromophorstapel kann außerdem die ungewöhnlich hohe Löslichkeit der Verbindung 2 in MCH erklären (> 15 mg mL1). Die detaillierte Untersuchung des Selbstorganisationsprozesses ermöglichte die Identifizierung geeigneter Bedingungen für die Untersuchung der Fluoreszenzeigenschaften der einzelnen Aggregatspezies. Für das nahezu nicht emittierende Monomer (Fl(M) = 0.23%) wurde durch zunehmende Rigidisierung im Dimer (Fl(D) = 2.3%) und im höherem Aggregat (Fl(H) = 4.5%) eine durch Aggregation induzierte Emissionssteigerung beobachtet. Die helikale Chiralität des PYOP-Decamer-Stapels führte außerdem zu einem starken CPL Signal mit einem hohen glum-Wert von 0.011. Das wichtige Fazit dieser Arbeit ist, dass sowohl temperatur- als auch lösungsmittelabhängige Studien valide Alternativen zu den klassischen konzentrationsabhängigen Untersuchungen sind, mit denen thermodynamische Parameter von Selbstorganisations-Gleichgewichten bestimmt werden können. Wobei für ein bestimmtes supramolekulares System eine der Methoden aus verschiedenen Gründen vorteilhafter sein kann als die anderen. Üblicherweise gegebene experimentelle Beschränkungen erfordern oft den kombinierten Einsatz von Techniken, um einen Selbstorganisationsprozess und die Aggregatstrukturen vollständig aufzuklären. Die anti-kooperative Merocyanin-Selbstorganisation, die hier zum ersten Mal für das PYOP-Merocyanin 2 beschrieben wurde, ist keine Ausnahme. Neben dem Interesse an den Merocyanin-Aggregaten aus struktureller und funktioneller Sicht können die aus den vorgestellten Studien gewonnenen Erkenntnisse auch auf andere Selbstassemblierungs-systeme übertragen werden und als Leitfaden für die Suche nach der am besten geeigneten Analysemethode dienen. KW - Merocyanine KW - Supramolekulare Chemie KW - Self-Assembly Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-352111 ER - TY - THES A1 - Neitz, Hermann T1 - Hydrophobic recognition motifs in functionalized DNA T1 - Hydrophobe Erkennungsmotive in funktionalisierter DNA N2 - In wässriger Umgebung spielen hydrophobe Wechselwirkungen eine wichtige Rolle für die DNA. Die Einführung von Modifikationen, die auf hydrophoben aromatischen Einheiten basieren, kann die Erkennung und Reaktivität von funktionellen Gruppen in der DNA steuern. Modifikationen können durch ein künstliches Rückgrat oder in Form einer Erweiterung der Nukleobasen eingebracht werden und so zu zusätzlichen Eigenschaften der DNA führen. Diese Dissertation befasst sich mit der Verwendung von hydrophoben Einheiten zur Funktionalisierung von DNA. Im ersten Teil der Arbeit wurde das Tolanmotiv (Diphenylacetylen) in Kombination mit dem acyclischen Rückgrat von GNA und BuNA verwendet, um Erkennungseinheiten im DNA-Kontext zu erzeugen. Die gezielte Fluorierung der aromatischen Ringe des Tolan-Bausteins bildete die Grundlage für eine supramolekulare Sprache, die auf Aren-Fluoroaren-Wechselwirkungen basiert. Die spezifische Erkennung wurde mittels thermodynamischer, kinetischer und NMR-spektroskopischer Methoden untersucht. Im zweiten Teil der Arbeit wurden Desoxyuridin-Derivate mit einer hydrophoben aromatischen Modifikation hergestellt und in die DNA-Doppelhelix eingebaut. Die Bestrahlung mit UV-Licht führte zu einer [2+2]-Cycloaddition zwischen zwei modifizierten Nukleosiden in der DNA. Das Reaktionsprodukt wurde strukturell charakterisiert und die Reaktion in verschiedenen biochemischen und nanotechnologischen DNA-Anwendungen eingesetzt. N2 - In aqueous environment, hydrophobic interactions play an important role for DNA. The introduction of modifications based on hydrophobic aromatic moieties offers additional ways for controlling recognition and reactivity of functional groups in DNA. Modifications are introduced through an artificial backbone or in the form of an extension of the nucleobases, resulting in additional properties of the DNA. This dissertation focuses on the use of hydrophobic units for the functionalization of DNA. In the first part of the work, the tolane (i. e. diphenylacetylene) motif was used in combination with the acyclic backbone of GNA and BuNA to generate recognition units in the DNA context. Fluorination of the aromatic rings in the tolane moiety provided the basis for a supramolecular language based on arene-fluoroarene interactions. The specific recognition was investigated by thermodynamic, kinetic and NMR spectroscopic methods. In the second part of the work, deoxyuridine derivatives with a hydrophobic aromatic modification were prepared and incorporated into DNA duplexes. The irradiation with UV light led to a [2+2] cycloaddition reaction between two modified nucleosides in the DNA. This reaction product was structurally characterized and the reaction was used in various biochemical and nanotechnological DNA applications. KW - Supramolekulare Chemie KW - Arene-Fluoroarene KW - Artificial Base Pair KW - Supramolecular Interaction KW - XNA KW - Crosslinking KW - DNA KW - DNS Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-348382 ER - TY - THES A1 - Mahlmeister, Bernhard T1 - Twisted Rylene Bisimides for Organic Solar Cells and Strong Chiroptical Response in the Near Infrared T1 - Kernverdrillte Rylenbisimide für organische Solarzellen und starke chirooptische Eigenschaften im Nahinfrarot N2 - The chirality of the interlocked bay-arylated perylene motif is investigated upon its material prospect and the enhancement of its chiroptical response to the NIR spectral region. A considerable molecular library of inherently chiral perylene bisimides (PBIs) was utilized as acceptors in organic solar cells to provide decent device performances and insights into the structure-property relationship of PBI materials within a polymer blend. For the first time in the family of core-twisted PBIs, the effects of enantiopurity on the device performance was thoroughly investigated. The extraordinary structural sensitivity of CD spectroscopy served as crucial analytical tool to bridge the highly challenging gap between molecular properties and device analytics by proving the excitonic chirality of a helical PBI dimer. The chirality of this perylene motif could be further enhanced on a molecular level by both the expansion and the enhanced twisting of the π-scaffold to achieve a desirable strong chiroptical NIR response introducing a new family of twisted QBI-based nanoribbons. These achievements could be substantially further developed by expanding this molecular concept to a supramolecular level. The geometrically demanding supramolecular arrangement necessary for the efficient excitonic coupling was carefully encoded into the molecular design. Accordingly, the QBIs could form the first J-type aggregate constituting a fourfold-stranded superhelix of a rylene bisimide with strong excitonic chirality. Therefore, this thesis has highlighted the mutual corroboration of experimental and theoretical data from the molecular to the supramolecular level. It has demonstrated that for rylene bisimide dyes, the excitonic contribution to the overall chiroptical response can be designed and rationalized. This can help to pave the way for new organic functional materials to be used for chiral sensing or chiral organic light-emitting devices. N2 - Die Chiralität des verzahnten Bucht-arylierten Perylenmotivs wurde im Hinblick auf seine Materialanwendung sowie die Verstärkung seiner chiroptischen Eigenschaften im NIR-Spektralbereich untersucht. Eine umfangreiche Molekülbibliothek von inhärent chiralen PBIs wurde als NFAs in OSCs verwendet, um sowohl gute Solarzelleneffizienzen sowie Einblicke in die Struktur-Eigenschafts-Beziehung von PBI Materialien innerhalb einer Polymermischung zu erhalten. Zum ersten Mal wurden für kernverdrillte PBIs die Auswirkungen der Enantiomerenreinheit auf die Effizienz von organischen Dünnfilmbauteilen untersucht. Die außerordentliche strukturelle Empfindlichkeit der CD Spektroskopie diente als entscheidendes Analysewerkzeug, um die hoch anspruchsvolle Lücke zwischen der Analytik molekularer Eigenschaften und der Bauteilanalytik zu schließen, indem die exzitonische Chiralität eines helikalen PBI-Dimers nachgewiesen wurde. Die Chiralität dieses Perylenmotivs konnte auf molekularer Ebene weiter verstärkt werden, indem das π-Gerüst sowohl erweitert als auch stärker verdrillt wurde, um wünschenswert starke chiroptische Eigenschaften im NIR-Bereich zu erzielen und so eine neue Molekülfamilie kernverdrillter QBIs zu definieren. Diese Errungenschaften konnten durch die Ausweitung dieses molekularen Konzepts auf eine supramolekulare Ebene noch erheblich weiterentwickelt werden. Die geometrisch anspruchsvolle supramolekulare Anordnung, die für die effiziente exzitonische Kopplung erforderlich ist, wurde sorgfältig in das molekulare Design kodiert. Dementsprechend stellt das präsentierte QBI in seiner vierfach versetzt gestapelten Superhelix das erste Rylenbisimid-J-Aggregat dar, welches eine starke exzitonische Chiralität zeigt. Somit hat die Arbeit hat die gegenseitige Bestätigung von experimentellen und theoretischen Daten von der molekularen bis hin zur supramolekularen Ebene herausgestellt und gezeigt, dass für Rylenbisimid-Farbstoffe der exzitonische Beitrag zu den chiroptischen Eigenschaften konzipiert, synthetisch realisiert und quantenmechanisch verstanden werden kann. Dies kann den Weg für neue organische Funktionsmaterialien ebnen, die für chirale Sensoren oder Licht emittierende Bauteile verwendet werden können. KW - Molekül KW - Chiralität KW - Exziton KW - Organische Solarzelle KW - Supramolekulare Chemie KW - organic solar cell KW - non-fullerene acceptor KW - perylene bisimide KW - quaterrylene bisimide KW - inherent chirality KW - excitonic chirality KW - supramolecular chemistry KW - self-assembly KW - near infrared chirality Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-346106 ER - TY - THES A1 - Mahl, Magnus T1 - Polycyclic Aromatic Dicarboximides as NIR Chromophores, Solid-State Emitters and Supramolecular Host Platforms T1 - Polyzyklische aromatische Dicarboximide als NIR-Chromophore, Festkörperemitter und supramolekulare Wirtsplattformen N2 - The present thesis introduce different synthetic strategies towards a variety of polycyclic aromatic dicarboximides (PADIs) with highly interesting and diverse properties. This included tetrachlorinated, tetraaryloxy- and tetraaryl-substituted dicarboximides, fused acceptor‒donor(‒acceptor) structures as well as sterically shielded rylene and nanographene dicarboximides. The properties and thus the disclosure of structure‒property relationships of the resulting dyes were investigated in detail among others with UV‒vis absorption spectroscopy, fluorescence spectroscopy, cyclic voltammetry and single crystal X-ray analysis. For instance, some of the fused and substituted PADIs offer strong absorption of visible and near infrared (NIR) light, NIR emission and low-lying LUMO levels. On the contrary, intriguing optical features in the solid-state characterize the rylene dicarboximides with their bulky N-substituents, while the devised sterically enwrapped nanographene host offered remarkable complexation capabilities in solution. N2 - Die vorliegende Arbeit stellt verschiedene Synthesestrategien für eine Vielfalt an polyzyklischen aromatischen Dicarboximiden (PADIs) mit hochinteressanten und vielfältigen Eigenschaften vor. Dies beinhaltete tetrachlorierte, tetraryloxy- und tetraaryl-substituierte Dicarboximide, fusionierte Akzeptor‒Donor(‒Akzeptor)-Strukturen wie auch sterisch abgeschirmte Rylen- und Nanographen-Dicarboximide. Die Eigenschaften und damit die Offenlegung von Struktur‒Eigenschaftsbeziehungen der resultierenden Farbstoffe wurden unter anderem mittels UV‒vis Absorptionsspektroskopie, Fluoreszenzspektroskopie, Zyklovoltammetrie und Einkristallstrukturanalyse detalliert untersucht. Zum Beispiel bieten einige der fusionierten und substituierten PADIs eine starke Absorption von sichtbaren und nahen Infrarot-Licht (NIR), NIR-Emission und niedrigliegende LUMO-Niveaus. Im Gegensatz dazu sind die Rylendicarboximide mit ihren voluminösen N-Substituenten durch faszinierende optische Eigenschaften im Festkörper charakterisiert, wohingegen der konzipierte sterisch eingehüllte Nanographen-Wirt bemerkenswerte Komplexierungs-Fähigkeiten in Lösung zeigte. KW - Organische Chemie KW - Perylenbisdicarboximide KW - Farbstoff KW - Fluoreszenz KW - Supramolekulare Chemie KW - C-C coupling KW - dicarboximide KW - NIR chromophore KW - solid-state emitter KW - host-guest chemistry Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234623 ER - TY - THES A1 - Renner, Rebecca T1 - Aggregation, Chirality and Reduction of Nonplanar Polycyclic Aromatic Hydrocarbons T1 - Aggregation, Chiralität und Reduktion Nichtplanarer Polyzyklischer Aromatischer Kohlenwasserstoffe N2 - Within this thesis the interactions between novel corannulene derivatives in solution as well as in the solid state by changing the imide residue of a literature known extended corannulene dicarboximide were investigated, in order to obtain a better understanding of the packing and possible charge transport in potential applications. Accordingly, the goal of the work was to synthesize and investigate an electron-poor corannulene bis(dicarboximide) based on previously published work but with higher solubility and less steric encumbrance in imide position to enable self-assembly in solution. To obtain further insights into the conformational stability, structure and chiroptical properties of heavily twisted PBIs another aim of this thesis was the design, synthesis, and optoelectronic investigation of various fourfold directly arylated PBIs by substitution in bay position with smaller hydrocarbons with different steric demand, i.e., benzene, naphthalene and pyrene, which should be separable by chiral high performance liquid chromatography (HPLC). As of yet, no concise study concerning the optical and electronic properties of differently core-substituted PBIs in the neutral as well as the mono- and dianionic state in solution is available, which also elucidates the origin of the different optical transitions observed in the absorption and emission spectra. Thus, in this thesis, the investigation of five PBI derivatives with different frontier energetic levels to produce a reference work of reduced PBIs was tackled. N2 - Im Rahmen dieser Arbeit wurden die Wechselwirkungen zwischen neuartigen Corannulen-Derivaten sowohl in Lösung als auch im festen Zustand durch Veränderung des Imid-Restes eines literaturbekannten annulierten Corannulen-Dicarboximids untersucht, um ein besseres Verständnis der Packung und des möglichen Ladungstransports in potentiellen Anwendungen zu erhalten. Dementsprechend war es das Ziel der Arbeit, ein elektronenarmes Corannulenbis(dicarboximid) zu synthetisieren und zu untersuchen, das auf bereits veröffentlichten Arbeiten basiert, jedoch eine höhere Löslichkeit und weniger sterischen Anspruch in der Imidposition aufweist, um die Selbstorganisation in Lösung zu ermöglichen. Um weitere Einblicke in die Konformationsstabilität, Struktur und chiroptischen Eigenschaften von stark verdrillten PBIs zu erhalten, war ein weiteres Ziel dieser Arbeit das Design, die Synthese und die optoelektronische Untersuchung verschiedener vierfach direkt arylierter PBIs durch Substitution in Bucht-Position mit kleineren Kohlenwasserstoffen mit unterschiedlichen sterischen Anforderungen, z.B. Phenyl, Naphthalin und Pyren, die durch chirale Hochleistungsflüssigkeitschromatographie (HPLC) trennbar sein sollten. Bisher gibt es noch keine übersichtliche Studie über die optischen und elektronischen Eigenschaften von unterschiedlich kernsubstituierten PBIs im neutralen sowie mono- und dianionischen Zustand in Lösung, die auch den Ursprung der unterschiedlichen optischen Übergänge in den Absorptions- und Emissionsspektren aufklärt. In dieser Arbeit wurde daher die Untersuchung von fünf PBI-Derivaten mit unterschiedlichen energetischen Eigenschaften in Angriff genommen, um ein Referenzwerk reduzierter PBIs zu erstellen. KW - Corannulene KW - Polycyclische Aromaten KW - Perylenbisdicarboximide KW - Aggregation KW - Chirality KW - Reduction KW - Perylenbisdicarboximide KW - Supramolekulare Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-247000 ER - TY - THES A1 - Peethambaran Nair Syamala, Pradeep T1 - Bolaamphiphilic Rylene Bisimides: Thermodynamics of Self-assembly and Stimuli-responsive Properties in Water T1 - Bolaamphiphile Rylenebisimide: Thermodynamik der Selbstorganisation und Stimuli-responsiven Merkmale in Wasser N2 - The present thesis demonstrates how different thermodynamic aspects of self-assembly and stimuli-responsive properties in water can be encoded on the structure of π-amphiphiles, consisting of perylene or naphthalene bisimide cores. Initially, quantitative thermodynamic insights into the entropically-driven self-assembly was studied for a series of naphthalene bisimides with UV/Vis and ITC measurements, which demonstrated that their thermodynamic profile of aggregation is heavily influenced by the OEG side chains. Subsequently, a control over the bifurcated thermal response of entropically driven and commonly observed enthalpically driven self-assembly was achieved by the modulation of glycol chain orientation. Finally, Lower Critical Solution Temperature (LCST) phenomenon observed for these dyes was investigated as a precise control of this behavior is quintessential for self-assembly studies as well as to generate ‘smart’ materials. It could be shown that the onset of phase separation for these molecules can be encoded in their imide substituents, and they are primarily determined by the supramolecular packing, rather than the hydrophobicity of individual monomers. N2 - Die vorliegende Arbeit zeigt, wie verschiedene thermodynamische Aspekte der Selbstorganisation sowie die Stimuli-responsiven Merkmale in Wasser mittels der Struktur von π-Amphiphilen mit Perylen- oder Naphthalinbisimidkernen programmiert werden können. Zunächst wurden quantitative thermodynamische Einblicke in die entropisch getriebene Selbstorganisation für eine Reihe von Naphthalinbisimiden mit UV / Vis- und ITC-Messungen untersucht. Diese zeigten, dass ihr thermodynamisches Aggregationsprofil stark von den Oligoethylenglykol-Seitenketten beeinflusst wird. Anschließend wurde durch gezielte Modulation der Glykolketten und der daraus resultierenden Neuorientierung der Ketten, eine Kontrolle über die Thermodynamik der Selbstassemblierung zwischen der häufiger beobachtbaren enthalpisch getriebenen und der entropisch getriebenen Selbstorganisation erreicht. Schließlich wurde das für diese Farbstoffe beobachtete Phänomen der niedrigeren kritischen Lösungstemperatur (LCST) untersucht, da eine genaue Kontrolle dieses Verhaltens für Selbstorganisationsstudien sowie für die Erzeugung „intelligenter“ Materialien von entscheidender Bedeutung ist. Es konnte gezeigt werden, dass der Beginn der Phasentrennung für diese Moleküle von ihren Imidsubstituenten und hauptsächlich durch die supramolekulare Packung bestimmt werden und nicht durch die Hydrophobie einzelner Monomere. KW - Supramolekulare Chemie KW - Aggregation KW - Selbstorganisation KW - Wasser KW - Supramolecular Chemistry KW - Thermodynamics KW - Self-assembly KW - Lower Critical Solution Temperature (LCST) KW - Water KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213424 ER - TY - THES A1 - Wehner, Marius T1 - Supramolecular Polymorphism in Homo- and Heterochiral Supramolecular Polymerizations T1 - Supramolekularer Polymorphismus in homo- und heterochiralen supramolekularen Polymerisationen N2 - The aim of the first part of this thesis was to investigate (R,R)-PBI as a model system for polymorphism at its origin by a supramolecular approach. The pathway complexity of (R,R)-PBI was fine-tuned by experimental parameters such as solvent, temperature and concentration to make several supramolecular polymorphs accessible. Mechanistic and quantum chemical studies on the kinetics and thermodynamics of the supramolecular polymerization of (R,R)-PBI were conducted to shed light on the initial stages of polymorphism. The second part of this work deals with mechanistic investigations on the supramolecular polymerization of the racemic mixture of (R,R)- and (S,S)-PBI with regard to homochiral and heterochiral aggregation leading to conglomerates and a racemic supramolecular polymer, respectively. N2 - Das Ziel des ersten Teils der Dissertation war es, anhand des Modellsystems (R,R)-PBI Polymorphismus mit Hilfe eines supramolekularen Ansatzes an dessen Ursprung zu untersuchen. Durch die Wahl geeigneter experimenteller Parameter wie Lösungsmittel, Temperatur und Konzentration wurden die komplexen Polymerisationspfade von (R,R)-PBI gezielt beeinflusst und verschiedene supramolekulare Polymorphe zugänglich gemacht. Mechanistische und quantenchemische Untersuchungen der Kinetik und Thermodynamik der supramolekularen Polymerisation von (R,R)-PBI wurden durchgeführt, um die Anfangsphase des Polymorphismus zu beleuchten. Der zweite Teil der vorliegenden Arbeit befasst sich mit mechanistischen Untersuchungen der supramolekularen Polymerisation der racemischen Mischung aus (R,R)- und (S,S)-PBI im Hinblick auf homo- und heterochirale Aggregation, welche zu Konglomeraten beziehungsweise einem racemischen supramolekularen Polymer führte. KW - Supramolekulare Chemie KW - Polymorphismus KW - Konglomerat KW - Aggregat KW - Organische Chemie KW - Aggregation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211519 ER - TY - THES A1 - Shen, Chia-An T1 - Dicyanomethylene Squaraines: Aggregation and G-Quadruplex Complexation T1 - Dicyanomethylen-Squaraine: Aggregation und G-Quadruplex-Komplexierung N2 - Squaraine dyes have attracted more attention in the past decade due to their strong and narrow absorption and fluorescence along with the easily functionalized molecular structure. One successful approach of core functionalization is to replace one oxygen of the squaric carbonyl group with a dicyanomethylene group, which shifts the absorption and emission into the near infrared (NIR) region and at the same time leads to a rigid, planar structure with C2v symmetry. However, such squaraines tend to aggregate cofacially in solution due to dispersion forces and dipole-dipole interactions, usually leading to H-type exciton coupling with undesired blue-shifted spectrum and quenched fluorescence. Therefore, the goal of my research was the design of dicyanomethylene-substituted squaraine dyes that self-assemble into extended aggregates in solution with J-type coupling, in order to retain or even enhance their outstanding optical properties. Toward this goal, bis(squaraine) dyes were envisioned with two squaraine units covalently linked to trigger a slip-stacked packing motif within the aggregates to enable J-type coupling. In my first project, bis(squaraine) dye BisSQ1 was synthesized, in which two dicyanomethylene squaraine chromophores are covalently linked. Concentration and temperature-dependent UV/Vis/NIR spectroscopy experiments reveal that BisSQ1 undergoes cooperative self-assembly resulting in J-type aggregates in a solvent mixture of toluene/1,1,2,2-tetrachloroethane (TCE) (98:2, v/v). The J type exciton coupling is evident from the significantly red shifted absorption maximum at 886 nm and the fluorescence peak at 904 nm. In conclusion, this was a first example to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by simply connecting two dyes in a head-to-tail bis chromophore structure. Connecting two squaraine dyes with an additional phenylene spacer (BisSQ2) leads to two different polymorphs with very distinct absorption spectra upon cooling down a solution of BisSQ2 in a solvent mixture of toluene/TCE (98:2, v/v) with different rates. Accordingly, rapid cooling resulted in rigid helical nanorods with an absorption spectrum showing a panchromatic feature, while slow cooling led to a sheet-like structure with a significant bathochromic shift in the absorption spectrum. It was discovered that the conventional molecular exciton model failed to explain the panchromatic absorption features of the nanorods for the given packing arrangement, therefore more profound theoretical investigations based on the Essential States Model (ESM) were applied to unveil the importance of intermolecular charge transfer (ICT) to adequately describe the panchromatic absorption spectrum. Moreover, the red-shift observed in the spectrum for the sheet-like structure can be assigned to the interplay of Coulomb coupling and ICT-mediated coupling. Furthermore, the same bis-chromophore strategy was adopted for constructing an NIR-II emitter with a bathochromically-shifted spectrum. In chloroform, BisSQ3 exhibits an absorption maximum at 961 nm with a significant bathochromic shift (1020 cm−1) compared to the reference mono-squaraine SQ, indicating intramolecular J-type coupling via head-to-tail arrangement of two squaraine dyes. Moreover, BisSQ3 shows a fluorescence peak at 971 nm with a decent quantum yield of 0.33%. In less polar toluene, BisSQ3 self-assembles into nanofibers with additional intermolecular J-type coupling, causing a pronounced bathochromic shift with absorption maximum at 1095 nm and a fluorescence peak at 1116 nm. Thus, connecting two quinoline-based squaraines in a head-to-tail fashion leads to not only intra-, but also intermolecular J-type exciton coupling, which serves as a promising strategy to shift the absorption and emission of organic fluorophores into the NIR-II window while retaining decent quantum yields. In conclusion, my research illustrates based on squaraine dyes how a simple modification of the molecular structure can significantly affect the aggregation behavior and further alter the optical properties of dye aggregates. Elongated supramolecular structures based on dicyanomethylene substituted squaraine dyes were successfully established by covalently linking two squaraine units to form a bis-chromophore structure. Then, a simple but efficient general approach was established to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by directly connecting two squaraine dyes in a head-to-tail fashion without spacer units. Moreover, the additional spacer between the squaraine dyes in BisSQ2 allowed different molecular conformations, which leads to two different morphologies depending on the cooling rates for a hot solution. Hence, this is a promising strategy to realize supramolecular polymorphism. In general, it is expected that the concept of constructing J-aggregates by the bis-chromophore approach can be extended to entirely different classes of dyes since J-aggregates possess a variety of features such as spectral shifts into the NIR window, fluorescence enhancement, and light harvesting, which are commonly observed and utilized for numerous fundamental studies and applications. Moreover, the insights on short-range charge transfer coupling for squaraine dyes is considered of relevance for all materials based on alternating donor-acceptor π-systems. The panchromatic spectral feature is in particular crucial for acceptor-donor-acceptor (ADA) dyes, which are currently considered as very promising materials for the development of bulk heterojunction solar cells. N2 - Squarainfarbstoffe haben in den letzten Jahren aufgrund ihrer hervorragenden optischen Eigenschaften, zu denen ein Cyanin-ähnliches Absorptions- und Fluoreszenzverhalten zählt, in Kombination mit einer leicht funktionalisierbaren Molekülstruktur immer mehr Aufmerksamkeit auf sich gezogen.22 Ein erfolgreicher Ansatz der Kernfunktionalisierung besteht darin, ein Sauerstoffatom der Quadratsäure-Carbonylgruppe durch eine Dicyanomethyleneinheit zu ersetzen, was die Absorption und Emission in den nahen infraroten (NIR-) Bereich verschiebt und gleichzeitig zu einer starren planaren Struktur mit C2v Symmetrie und einem Grundzustandsdipolmoment führt.27 Diese Eigenschaften haben sich als vorteilhaft für die π-π-Aggregation von diesen Squarainen auf G-Quadruplex (G4) Strukturen erwiesen, wie in Kapitel 6 beschrieben. Solche Squaraine neigen jedoch zur Bildung von Dimeren oder kleinen Aggregaten in Lösung mit kofazialen Chromophoranordnungen aufgrund Dispersionskräften und Dipol-Dipol-Wechselwirkungen. Dies resultiert in der Regel zu einer H-artigen exzitonischen Kopplung mit unerwünschten, blauverschobenen Absorptionsbanden und gelöschter Fluoreszenz.28 Daher war das Ziel dieser Dissertation, Dicyanomethylen-substituierte Squarainfarbstoffe zu entwickeln, die sich in Lösung zu verlängerten Aggregaten mit J-artiger Kopplung selbst organisieren. Auf diese Weise sollten die ausgezeichneten optischen Eigenschaften der Squarainfarbstoffe erhalten oder sogar verbessert werden. Zu diesem Zweck, wurden Bis(squarain)-Farbstoffe synthetisiert, in denen zwei Squarain-Einheiten kovalent verbunden sind, was zu einer gestapelten Anordnung mit longitudinalem Versatz innerhalb der Aggregate und damit zu einer J-artigen Kopplung führt. ... KW - Squaraine KW - Selbstorganisation KW - Farbstoff KW - Supramolekulare Chemie KW - Quadruplex-DNS KW - Self-assembly KW - Aggregation KW - exciton coupling KW - cooperative KW - spectroscopy Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-243599 ER - TY - THES A1 - Meza Chincha, Ana Lucia T1 - Catalytic Water Oxidation with Functionalized Ruthenium Macrocycles T1 - Katalytische Wasseroxidation mit funktionalisierten Ruthenium Makrozyklen N2 - In light of the rapidly increasing global demand of energy and the negative effects of climate change, innovative solutions that allow an efficient transition to a carbon-neutral economy are urgently needed. In this context, artificial photosynthesis is emerging as a promising technology to enable the storage of the fluctuating energy of sunlight in chemical bonds of transportable “solar fuels”. Thus, in recent years much efforts have been devoted to the development of robust water oxidation catalysts (WOCs) leading to the discovery of the highly reactive Ru(bda) (bda: 2,2’-bipyridine-6,6’-dicarboxylic acid) catalyst family. The aim of this thesis was the study of chemical and photocatalytic water oxidation with functionalized Ruthenium macrocycles to explore the impact of substituents on molecular properties and catalytic activities of trinuclear macrocyclic Ru(bda) catalysts. A further objective of this thesis comprises the elucidation of factors that influence the light-driven water oxidation process with this novel class of supramolecular WOCs. N2 - Innovative Ansätze zur Ermöglichung eines effizienten Übergangs zur CO2-Neutralität werden angesichts der schnell steigenden Nachfrage nach Energie und der negativen Effekte des Klimawandels dringend gesucht. In diesem Zusammenhang hat das Konzept der künstlichen Photosynthese in den letzten Jahren für besondere Aufmerksamkeit gesorgt. In dieser Hinsicht erscheinen in 2009 erstmals beschriebenen Ru(bda) (bda: 2,2’-bipyridin-6,6’-dicarbonsäure) Wasseroxidationskatalysatoren besonders vielversprechend. Das Ziel dieser Forschungsarbeit war die Untersuchung von funktionalisierten Ruthenium Makrozyklen in der chemischen und photokatalytischen Wasseroxidation, um den Einfluss der Substituenten in den Liganden auf molekulare Eigenschaften und katalytische Aktivitäten der Makrozyklen zu analysieren. Des Weiteren sollten Faktoren identifiziert werden, welche Einfluss auf die Effizienz der Photokatalyse mit dieser neuartigen Klasse von supramolekularen Katalysatoren ausüben. KW - Rutheniumkomplexe KW - Ruthenium complexes KW - Supramolekulare Chemie KW - Katalyse KW - Wasser KW - metallosupramolecular chemistry KW - catalysis KW - water oxidation KW - Oxidation KW - Wasseroxidation KW - Metallosupramolekulare Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-209620 ER - TY - THES A1 - Sapotta, Meike T1 - Perylene Bisimide Cyclophanes: Recognition of Alkaloids, Aggregation Behavior in Aqueous Environment and Guest-Mediated Chirality Transfer T1 - Perylenbisimidcyclophane: Alkaloiderkennung, Aggregationsverhalten in wässriger Umgebung und gastvermittelter Chiralitätstransfer N2 - Inspired by the fact that sufficient solubility in aqueous media can be achieved by functional substitution of perylene bisimides (PBIs) with polar groups, one of the essential aims of this thesis was the design and successful synthesis of the new water-soluble PBI cyclophanes [2PBI]-1m and [2PBI]-1p, which are appended with branched, hydrophilic oligoethylene glycol (OEG) chains. Subsequently, the focus was set on the elucidation of properties of PBI cyclophane hosts which are also of relevance for recognition processes in biological systems. The performance of the new amphiphilic PBI cyclophane [2PBI]-1p as synthetic receptors for various natural aromatic alkaloids in aqueous media was thoroughly investigated. Alkaloids represent a prominent class of ubiquitous nitrogen containing natural compounds with a great structural variety and diverse biological activity. As of yet, no chromophore host acting as a molecular probe for a range of alkaloids such as harmine or harmaline is known. In addition, the self-association behavior of cyclophane host [2PBI]-1m and its reference monomer in water was studied in order to gain insights into the thermodynamic driving forces affecting the self-assembly process of these two PBI systems in aqueous environment. Moreover, the chirality transfer upon guest binding previously observed for a PBI cyclophane was investigated further. The assignment of the underlying mechanism of guest recognition to either the induced fit or conformational selection model was of particular interest. N2 - Diese Arbeit befasste sich mit der Erforschung neuer Eigenschaften von Perylenbisimid-cyclophanwirten, zum Beispiel der Gast-Komplexierung in wässriger Umgebung (Kapitel 3.2) oder dem Einfluss von Wasser beim Selbstassemblierungsprozess einer dieser Wirte in Wasser (Kapitel 3.3). Weiterhin wurden der Chiralitätstransfer durch Gasterkennung und das der Wirt-Gast-Komplexbildung zugrunde liegende mechanistische Modell untersucht (Kapitel 3.4). ... KW - Supramolekulare Chemie KW - Perylenderivate KW - Wirt-Gast-Beziehung KW - Host-Guest-Chemistry KW - Self-Assembly in Water KW - Chirality Transfer KW - Chiralität KW - Selbstorganisation KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200028 ER -