TY - JOUR A1 - Zahoranová, Anna A1 - Luxenhofer, Robert T1 - Poly(2‐oxazoline)‐ and Poly(2‐oxazine)‐Based Self‐Assemblies, Polyplexes, and Drug Nanoformulations—An Update JF - Advanced Healthcare Materials N2 - For many decades, poly(2‐oxazoline)s and poly(2‐oxazine)s, two closely related families of polymers, have led the life of a rather obscure research topic with only a few research groups world‐wide working with them. This has changed in the last five to ten years, presumably triggered significantly by very promising clinical trials of the first poly(2‐oxazoline)‐based drug conjugate. The huge chemical and structural toolbox poly(2‐oxazoline)s and poly(2‐oxazine)s has been extended very significantly in the last few years, but their potential still remains largely untapped. Here, specifically, the developments in macromolecular self‐assemblies and non‐covalent drug delivery systems such as polyplexes and drug nanoformulations based on poly(2‐oxazoline)s and poly(2‐oxazine)s are reviewed. This highly dynamic field benefits particularly from the extensive synthetic toolbox poly(2‐oxazoline)s and poly(2‐oxazine)s offer and also may have the largest potential for a further development. It is expected that the research dynamics will remain high in the next few years, particularly as more about the safety and therapeutic potential of poly(2‐oxazoline)s and poly(2‐oxazine)s is learned. KW - block copolymers KW - colloids KW - cytotoxicity KW - drug delivery KW - micelles KW - microphase separation KW - thermogelling Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-225833 VL - 10 IS - 6 ER - TY - THES A1 - Wulfert-Holzmann, Paul T1 - Die elektrische Leitfähigkeit des negativen Aktivmaterials moderner Blei-Säure-Batterien T1 - The electrical conductivity of the negative active material in modern lead-acid batteries N2 - Diese Doktorarbeit beschäftigt sich mit dem Wirkmechanismus der elektrischen Leitfähigkeit in Blei-Säure-Batterien. Obwohl ihm eine zentrale Rolle beim „Kohlenstoff-Effekt“ zugeordnet wird, ist der Wirkmechanismus der elektrischen Leitfähigkeit bislang vergleichsweise wenig untersucht worden und konnte dementsprechend noch nicht vollständig aufgeklärt werden. Mit dem Anspruch, diese Forschungslücke zu schließen, zielt die vorliegende Doktorarbeit darauf ab, den Einfluss der elektrischen Leitfähigkeit auf die Performance der Blei-Säure-Batterie systematisch herauszuarbeiten und so einen Beitrag zur Generierung neuer Entwicklungsansätze zu leisten, z. B. in Form von maßgeschneiderten Additiven. Bislang ist noch unklar, ob allein die elektrische Leitfähigkeit des Aktivmaterials relevant ist oder diese auch durch Additive beeinflusst wird. Das liegt vor allem daran, dass geeignete Messmethoden fehlen und deshalb der Einfluss von Additiven auf die elektrische Leitfähigkeit des Aktivmaterials wenig untersucht wurde. Deswegen zielt diese Arbeit auch darauf ab, eine neuartige Messmethode zu entwickeln, um die elektrische Leitfähigkeit des Aktivmaterials im laufenden Betrieb bestimmen zu können. Aufgrund der Vorkenntnisse und Vorarbeiten am Fraunhofer ISC werden die Untersuchungen dabei auf die negative Elektrode limitiert. Insgesamt unterteilt sich die Doktorarbeit in die zwei Abschnitte. Im ersten Abschnitt werden elektrisch isolierende Stöber-Silica als Additive im negativen Aktivmaterial eingesetzt, um den Einfluss der elektrischen Leitfähigkeit des Additivs auf die elektrochemischen Eigenschaften der Batterie herauszustellen. Untersucht wird dabei die u.a. die Doppelschichtkapazität, die Wasserstoffentwicklung und die dynamische Ladeakzeptanz. Im zweiten Abschnitt steht die elektrische Leitfähigkeit des negativen Aktivmaterials im Fokus. Es wird zunächst eine neue Messmethodik entwickelt, die ihre in-situ- und operando-Bestimmung ermöglicht. Nach einer umfassenden Evaluierung und der Betrachtung verschiedener Betriebsparameter wird die Methodik für eine erste proof-of-concept-Messreihe angewendet, um den Einfluss von Additiven auf die elektrische Leitfähigkeit des negativen Aktivmaterials zu untersuchen. N2 - This dissertation deals with the effect mechanism of electrical conductivity in lead-acid batteries. Although it is believed to play a key role in the "carbon effect", the effect mechanism of electrical conductivity has been studied to lesser extent than other factors so far and accordingly has not yet been fully elucidated. With the aim of closing this research gap, the present dissertation aims to systematically work out the influence of electrical conductivity on lead-acid battery performance and thus contribute to the generation of new development approaches, e.g. in the form of tailored additives. So far, it is still unclear whether the electrical conductivity of the active material alone is relevant or whether this is also influenced by additives. This is mainly due to the fact that suitable measurement methods are lacking and therefore the influence of additives on the electrical conductivity of the active material has been investigated to less extent. Therefore, this work also aims to develop a novel measurement method to determine the electrical conductivity of the active material during operation. Due to the previous knowledge and work at Fraunhofer ISC, the investigations are limited to the negative electrode. Overall, the thesis is divided into two sections. In the first section, electrically insulating Stöber silica particles are used as additives in the negative active material in order to highlight the influence of the electrical conductivity of the additive on the electrochemical properties of the battery. Among other things, the double-layer capacitance, hydrogen evolution and dynamic charge acceptance are investigated. The second section focuses on the electrical conductivity of the negative active material. First, a new measurement methode is developed that allows its in-situ and operando determination. After a comprehensive evaluation and consideration of various operational parameters, the methodology is applied to a first proof-of-concept series of measurements to investigate the influence of additives on the electrical conductivity of the negative active material. KW - Bleiakkumulator KW - Blei KW - Batterie KW - Kohlenstoff KW - Elektrochemie KW - Blei-Säure-Batterie KW - Stöber-Silica KW - operando-Messung KW - Lead-acid batteries KW - Stöber silica Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-298397 ER - TY - JOUR A1 - Wintzheimer, Susanne A1 - Oppmann, Maximilian A1 - Dold, Martin A1 - Pannek, Carolin A1 - Bauersfeld, Marie‐Luise A1 - Henfling, Michael A1 - Trupp, Sabine A1 - Schug, Benedikt A1 - Mandel, Karl T1 - Indicator Supraparticles for Smart Gasochromic Sensor Surfaces Reacting Ultrafast and Highly Sensitive JF - Particle & Particle Systems Characterization N2 - The detection of toxic gases, such as NH\(_{3}\) and CO, in the environment is of high interest in chemical, electronic, and automotive industry as even small amounts can display a health risk for workers. Sensors for the real‐time monitoring of these gases should be simple, robust, reversible, highly sensitive, inexpensive and show a fast response. The indicator supraparticles presented herein can fulfill all of these requirements. They consist of silica nanoparticles, which are assembled to supraparticles upon spray‐drying. Sensing molecules such as Reichardt's dye and a binuclear rhodium complex are loaded onto the microparticles to target NH\(_{3}\) and CO detection, respectively. The spray‐drying technique affords high flexibility in primary nanoparticle size selection and thus, easy adjustment of the porosity and specific surface area of the obtained micrometer‐sized supraparticles. This ultimately enables the fine‐tuning of the sensor sensitivity and response. For the application of the indicator supraparticles in a gas detection device, they can be immobilized on a coating. Due to their microscale size, they are large enough to poke out of thin coating layers, thus guaranteeing their gas accessibility, while being small enough to be applicable to flexible substrates. KW - CO sensing KW - NH\(_{3}\) KW - sensor supports KW - silica supraparticles KW - smart surfaces Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213671 VL - 36 IS - 10 ER - TY - THES A1 - Wenderoth, Sarah T1 - Synthesis and characterization of shear stress indicator supraparticles T1 - Synthese und Charakterisierung von Scherstress-Indikator-Suprapartikeln N2 - The detection of smallest mechanical loads plays an increasingly important role in many areas of advancing automation and manufacturing technology, but also in everyday life. In this doctoral thesis, various microparticle systems were developed that are able to indicate mechanical shear stress via simple mechanisms. Using a toolbox approach, these systems can be spray-dried from various nanoscale primary particles (silica and iron oxide) to micrometer-sized units, so-called supraparticles. By varying the different building blocks and in combination with different dyes, a new class of mechanochromic shear stress indicators was developed by constructing hierarchically structured core-shell supraparticles that can indicate mechanical stress via an easily detectable color change. Three different mechanisms can be distinguished. If a signal becomes visible only by a mechanical load, it is a turn-on indicator. In the opposite case, the turn-off indicator, the signal is switched off by a mechanical load. In the third mechanism, the color-change indicator, the color changes as a result of a mechanical load. In principle, these indicators can be used in two different ways. First, they can be incorporated into a coating as an additive. These coatings can be applied to a wide range of products, including food packaging, medical devices, and generally any sensitive surface where mechanical stress, such as scratches, is difficult to detect but can have serious consequences. Second, these shear stress indicators can also be used directly in powder form and for example then applied in 3D-printing or in ball mills. A total of six different shear stress indicators were developed, three of which were used as additives in coatings and three were applied in powder form. Depending on their composition, these indicators were readout by fluorescence, UV-Vis or Magnetic Particle Spectroscopy. The development of these novel shear stress indicator supraparticles were successfully combined molecular chemistry with the world of nano-objects to develop macroscopic systems that can enable smart and communicating materials to indicate mechanical stress in a variety of applications. N2 - Die Erfassung kleinster mechanischer Belastungen spielt in vielen Bereichen der fortschreitenden Automatisierungs- und Fertigungstechnik, aber auch im täglichen Leben eine immer wichtigere Rolle. Im Rahmen dieser Doktorarbeit wurden verschiedene mikropartikuläre Systeme entwickelt, die in der Lage sind, mechanische Scherbelastungen über einfache Mechanismen anzuzeigen. Diese Systeme können mit einem Baukastenprinzip über das Sprühtrocknungsverfahren aus verschiedenen nanoskaligen Primärpartikeln (Silica und Eisenoxid) zu mikrometergroßen Einheiten, sogenannten Suprapartikeln, aufgebaut werden. Durch den Aufbau von hierarchisch strukturierten Kern-Schale Suprapartikeln, die durch Variation der verschiedenen Bausteine und in Kombination mit unterschiedlichen Farbstoffen mechanische Belastungen durch einen leicht detektierbaren Farbumschlag anzeigen können, wurde eine neue Klasse von mechanochromen Scherstress-Indikatoren entwickelt. Dabei kann zwischen drei verschiedene Mechanismen unterschieden werden. Wird ein Signal erst durch eine mechanische Belastung sichtbar, handelt es sich um Turn-on Indikatoren. Im umgekehrten Fall, den Turn-off Indikatoren, wird das Signal durch eine mechanische Belastung abgeschaltet. Beim dritten Mechanismus, den Color-change Indikatoren, ändert sich die Farbe durch eine mechanische Belastung. Diese Indikatoren können prinzipiell auf zwei verschiedene Arten eingesetzt werden. Zum einen können sie als Additive in eine Beschichtung eingearbeitet werden. Diese Schichten sind auf vielen Produkten applizierbar, wie z. B. auf Lebensmittelverpackungen, auf medizinischen Gütern oder allgemein auf allen sensiblen Oberflächen, bei denen mechanische Belastungen, wie z. B. Kratzer, schwierig zu detektieren sind, aber schwerwiegende Folgen haben können. Zum anderen sind diese Scherstress-Indikatoren auch direkt in Pulverform einsetzbar. So können sie z. B. in der Robotik, im 3D-Druck oder in Kugelmühlen eingesetzt werden. Im Rahmen dieser Arbeit konnten insgesamt sechs verschiedene Scherstress-Indikatoren entwickelt werden, von denen drei als Additive in Beschichtungen und drei in Pulverform Verwendung finden. Diese suprapartikulären Indikatoren können, je nach Zusammensetzung, mittels Fluoreszenz-, UV-Vis- oder Magnetischer Partikel Spektroskopie ausgelesen werden und dadurch mechanische Belastung anzeigen. Durch die Entwicklung dieser neuartigen Scherstress-Indikator-Suprapartikel ist es gelungen, die Molekülchemie mit der Welt der Nanoobjekte zu verbinden und makroskopische Systeme zu entwickeln, die intelligente und kommunizierende Materialien zur Anzeige von mechanischen Belastungen in einer Vielzahl von Anwendungen ermöglichen. KW - Nanopartikel KW - Indikator KW - Scherverhalten KW - Fluoreszenz KW - Mikropartikel KW - Supraparticle KW - Shear stress indicator Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-352819 ER - TY - THES A1 - Wagenhöfer, Julian T1 - Mikro- und mesoporöse Silicate als Wirkstoffspeichersysteme T1 - Micro and mesoporous silica for drug-delivery-systems N2 - Mesoporöse Silica-Materialien (MSM) und mikroporöse Zeolithe besitzen große innere Oberflächen und eine damit verbundene hohe Speicherkapazität von verschiedenen Molekülen. Auf Grund dieser Eigenschaften stehen poröse, silicatische Materialien seit etwa 10 Jahren im Focus der Entwicklung neuartiger Wirkstoffspeichersysteme (WSS). Die innerhalb dieser Thematik veröffentlichten wissenschaftlichen Arbeiten konnten die Fragestellungen nach dem exakten Mechanismus der Wirkstoffspeicherung und Wiederfreisetzung bisher nicht komplett beantworten. Die vorliegende Arbeit beschäftigt sich im Besonderen mit der Beladung und Abgabe des Lokalanästhetikum Lidocain-Hydrochlorid (LidHCl) in bekannten MSM wie SBA15, MCM41 oder HMS, sowie in unterschiedlich modifizierten Zeolithen vom Typ FAU und BEA. Zusätzlich wurde der Einfluss von organischen Ankergruppen innerhalb der Porenstruktur von SBA15 auf dessen Sorptions-eigenschaften hin untersucht. Ziel der Promotionsarbeit ist die Aufklärung des Speicher- und Freisetzungs-mechanismus dieses speziellen Speichersystems. Dazu wurden zunächst detaillierte Analysen der reinen und der mit Wirkstoff beladenen Matrizes via N2-Sorption (BET-, BJH-, t-plot-Methode), XRD, SAXS, DSC und TG durchgeführt. Außerdem wurden grafische Profile erstellt, die das Verhältnis der ad- bzw. desorbierten Wirkstoffmengen gegen die bei der Beladung eingesetzten Wirkstoffkonzentrationen (Speicherprofil) bzw. gegen die bei der Wiederfreisetzung verstrichene Zeit (Freisetzungsprofil) wiedergeben. Durch die Kombination dieser Untersuchungsmethoden konnte der jeweilige Sorptionsmechanismus, sowie der Speicherort der Wirkstoffmoleküle innerhalb der ausgewählten Matrix erfasst werden. Der Vergleich der verschiedenen, hier untersuchten Speichersysteme zeigt, dass neben der Porengröße, die Art der Adsorbens-Adsorbat-Wechselwirkung, aber auch die Stabilität der Porenstruktur einen großen Einfluss auf die Sorption von Molekülen nimmt. N2 - Mesoporous Silica Materials (MSM) and microporous zeolites show high inner surfaces and high storage capacities for the delivery of molecules. As a result of these characteristics porous silica materials are in the focus of new Drug Delivery Systems (DDS´s) for about ten years. Scientific work on this topic could not totally clarify the mechanism of drug delivery and drug release up to now. This work deals particularly with the storage and release of the local anesthetic lidocaine hydrochloride (LidHCl) both in well-known MSM like SBA15, MCM41 or HMS and in modified zeolite type FAU or BEA. In addition the influence of organic anchor groups in modified SBA15 on the sorption characteristic was examined. The aim of this PhD thesis is the clarification of the delivery mechanism of this special DDS. Initially detailed analysis of pure and drug-loaded matrices were done by N2 Sorption (BET-, BJH-, t-plot-method), XRD, SAXS, DSC and TGA. Furthermore graphic accounts illustrate the relationship between the adsorbed drug amount and the drug concentration used during the loading (sorption profile) or released drug amount and the elapsed time (release profile). Delivery mechanisms and sorption spots of the drug molecules inside the selected adsorbents were formulated by the combination of these characterization methods. The comparison of the used DDS´s shows in detail that the sorption of molecules in porous silicates is extra-ordinary influenced by pore size, drug-adsorbens interaction and pore structure stability of the matrix. KW - Silicate KW - Zeolith KW - Lidocain KW - Wirkstofffreisetzung KW - Mikroporosität KW - Freisetzungskinetik KW - Wirkstoffspeichersystem KW - Speicherprofil KW - Nanoporöser Stoff KW - Mesoporous Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-103848 ER - TY - THES A1 - Ulbricht, Juliane T1 - Insights into Polymer Biodegradation - Investigations on oxidative, hydrolytic and enzymatic Pathways T1 - Einblicke in die Bioabbaubarkeit von Polymeren - Untersuchungen zu oxidativen, hydrolytischen und enzymatischen Abbauwegen N2 - The present work aims towards the investigation of polymer degradation under biologically relevant conditions. In order to assess a potential degradation of polymers of interest for biomedical applications in vivo and associated effects on living tissue, representatives of poly(2-oxazoline)s and polypeptoids as well as poly(ethylene glycol) and poly(N-vinylpyrrolidone) for reference purposes are examined regarding their stability under oxidative and hydrolytic conditions as well as towards enzymatic degradation. The polymers investigated in the framework of this thesis are generally considered to be non-biodegradable. Both poly(ethylene glycol) and poly(N-vinylpyrrolidone) are or were applied intensively in vivo provoking seriously harmful side effects like fatal blood poisoning from the oxidation of poly(ethylene glycol) chain ends or poly(N-vinylpyrrolidone) storage disease. Poly(2-alkyl-2-oxazoline)s and polypeptoids, both promising polymeric biomaterials for a wide variety of in vivo applications, are not clinically applied yet but undergo thorough investigations. However, comprising amide bonds within the backbone or the appending side chain, poly(2-alkyl-2-oxazoline)s and polypeptoids potentially offer a higher susceptibility towards (bio-)degradation. Representing the three most impactful initiators of degradation in vivo, the present study is focused on polymer deterioration by oxidative species, hydrolytic conditions and enzymes. Oxidative species are generated in a variety of processes in vivo, both on purpose and as an unintentional by-product. Previous investigations revealed the susceptibility of poly(ethylene glycol), poly(N-vinylpyrrolidone), poly(2-alkyl-2-oxazoline)s and polypeptoids to deterioration by hydroxyl radicals deriving from hydrogen peroxide and copper ions. The obtained data confirm previous results of an apparent degradation rate increasing with increasing chain length due to self-inhibitory end group effects for all investigated polymer species. Although the exact concentrations of oxidative species in vivo are very controversial, with respect to their great variety and wide distribution the investigated polymers are likely prone to oxidative deterioration to some extent, with rates, mechanisms and degradation products strongly depending on the respective reactive species, polymer structure and chain length. Like blood, most tissues of the human body benefit from a slightly alkaline pH value. Nevertheless, specific areas like the human stomach or tumor tissues possess acidic conditions potentially capable to cleave amide bonds comprised by poly(2-alkyl-2-oxazoline)s and polypeptoids. Unlike the hydrolysis of poly(2-alkyl-2-oxazoline)s resulting in side chain cleavage, the hydrolysis of polypeptoids induces backbone scission decreasing the polymer chain length tremendously and releasing, if performed exhaustively, the respective amino acids. Hydrolysis of polysarcosine is monitored by quantification of the released sarcosine via 1H-NMR spectroscopy and determination of the residual Mw via GPC. Its cyclic dimer sarcosine anhydride is formed as an intermediate product in this process via cyclization of unstable linear dimers of sarcosine. Modification and degradation of bio(macro)molecules is an essential part of human metabolism. Polymers bearing amide bonds and showing a great similarity to natural occurring and widely distributed polypeptides, like poly(2-alkyl-2-oxazoline)s and polypeptoids, bear the potential of an enzymatic biodegradability by (more or less specific) peptidases. Just like the acidic hydrolysis described previously, peptidase activity would result in the cleavage of polymer amide bonds. The aim of the present thesis was to evaluate the stability of poly(2-alkyl-2-oxazoline)s and polypeptoids as well as poly(ethylene glycol) for the sake of reference under circumstances resembling in vivo conditions as closely as possible. Initial experiments focused on the degradation of dye-labeled upon incubation with homogenates of freshly harvested rat liver and kidney. However, although the obtained results are promising for the most part, they are considered rather unreliable and non-reproducible for various reasons. More conclusive data are attained from the incubation of non-labeled polymers in freshly laid chicken eggs. While no evidence for an enzymatic digestion of poly(ethylene glycol) in chicken egg white is found and deterioration of poly(2-methyl-2-oxazoline) upon incubation apparently derives from non-enzymatic hydrolysis, incubated polysarcosine samples reveal distinct elugram patterns depending on the respective C- and N-terminal end groups indicating both exopeptidase and endopeptidase activity. It has to be kept in mind though, that an enzymatic digestibility of polysarcosine does not necessarily imply the digestion of polypeptoids bearing longer side chains by peptidases as well, which should be investigated in further studies. N2 - Die vorgestellte Arbeit befasst sich mit der Untersuchung des Abbauverhaltens von Polymeren unter biologisch relevanten Bedingungen. Vertreter der Poly(2-alkyl-2-oxazolin)e und Polypeptoide sowie Polyethylenglycol und Poly(N-vinylpyrrolidon) als Referenzpolymere werden im Hinblick auf ihre Stabilität unter oxidativen und hydrolytischen Bedingungen sowie gegen enzymatische Verdauung untersucht, um Rückschlüsse auf ihren potentiellen Abbau in vivo ziehen und die damit verbundenen Auswirkungen auf lebendes Gewebe abschätzen zu können. Poly(2-alkyl-2-oxazolin)e und Polypeptoide, zwei vielversprechende, jedoch noch wenig untersuchte Polymerklassen, sind als Biomaterialien für eine Vielzahl von in vivo Anwendungen interessant, werden aber bisher nicht kommerziell eingesetzt. Wie auch Polyethylenglycol und Poly(N-vinylpyrrolidon) werden Poly(2-alkyl-2-oxazolin)e und Polypeptoide als nicht bioabbaubar angesehen, was in Anbetracht der im Polymerrückgrat bzw. der davon abgehenden Seitenkette enthaltenen Amidbindungen kritisch zu hinterfragen ist. Reaktive Sauerstoff- und Stickstoffspezies werden in vivo in einer Vielzahl von Prozessen gezielt oder auch als unerwünschtes Nebenprodukt gebildet. Vorangegangene Untersuchungen konnten bereits die Anfälligkeit von Polyethylenglycol, Poly(N-vinylpyrrolidon), Poly(2-alkyl-2-oxazolin)en und Polypeptoiden für Modifikationen durch in situ durch Reaktion von Wasserstoffperoxid und Kupferionen gebildete Hydroxylradikale zeigen. Desweiteren wiesen die Resultate auf eine starke Abhängigkeit der scheinbaren Abbaurate von der Polymerkettenlänge hin. Die erhaltenen Daten bestätigen die früheren Ergebnisse zum Anstieg der scheinbaren Abbaurate mit steigender Kettenlänge durch selbstinhibitorische Endgruppeneffekte für alle untersuchten Polymerspezies. Die tatsächlichen Konzentrationen reaktiver Sauerstoffspezies in vivo werden kontrovers diskutiert, hinsichtlich ihrer großen Vielfalt und breiten Verteilung im Körper ist es jedoch durchaus wahrscheinlich, dass die untersuchten Polymere in vivo in unterschiedlichem Maße dem oxidativen Abbau unterliegen. Dabei sind nicht nur die Abbauraten, sondern auch der Mechanismus und die entsprechend gebildeten Abbauprodukte von der Art der reaktiven Spezies, der Polymerstruktur und der entsprechenden Kettenlänge abhängig. Blut und die meisten Gewebe des menschlichen Körpers sind auf einen leicht alkalischen pH-Wert angewiesen. Dennoch weisen spezifische Regionen wie den Magen oder Tumorgewebe ein saures Milieu auf, welches eventuell in der Lage ist, Amidbindungen, wie sie in Poly(2-alkyl-2-oxazolin)en und Polypeptoiden enthalten sind, zu spalten. Im Gegensatz zur Hydrolyse von Poly(2-alkyl-2-oxazolin)en, welche in Abspaltung der Seitenkette resultiert, kommt es bei der Hydrolyse von Polypeptoiden zur Spaltung des Polymerrückgrates, welche mit einer drastischen Verringerung der Kettenlänge und, mit fortschreitender Hydrolyse, mit der Freisetzung der entsprechenden Aminosäure einhergeht. Die Hydrolyse von Polysarkosin wird durch Quantifizierung des freigesetzten Sarkosins via 1H-NMR Spektroskopie sowie durch Bestimmung des Mw via GPC verfolgt. Dabei zeigt sich, dass sich das zyklische Dimer Sarkosinanhydrid als Zwischenprodukt der Hydrolyse durch Zyklisierung instabiler linearer Dimere bildet. Die Modifikation und der Abbau von Bio(makro)molekülen sind essentieller Bestandteil des menschlichen Metabolismus. Polymere, die wie die Poly(2-alkyl-2-oxazolin)e und Polypeptoide Amidbindungen und damit große Ähnlichkeit zu den natürlich vorkommenden und weit verbreiteten Polypeptiden aufweisen, bergen das Potential einer möglichen Bioabbaubarkeit durch Peptidasen. Ziel der vorliegenden Arbeit war die Evaluierung der Stabilität von Poly(2-alkyl-2-oxazolin)en und Polypeptoiden sowie Polyethylenglycol als Referenzpolymer ohne Amidbindungen unter Bedingungen, welche den in vivo vorliegenden Verhältnisse möglichst ähnlich sind. In ersten Experimenten liegt der Schwerpunkt auf der Inkubation Farbstoff-markierter Polymere in Homogenaten von frisch entnommenen Rattenlebern und -nieren. Obwohl die erhaltenen Ergebnisse zum Großteil vielversprechend sind, bestehen aus einer Vielzahl von Gründen Zweifel an ihrer Zuverlässigkeit und Reproduzierbarkeit. Die Inkubation von nicht marktierten Polymeren in frisch gelegten Hühnereiern liefert aussagekräftigere Ergebnisse. Es sind keine Hinweise auf einen enzymatischen Abbau von Polyethylenglycol in Hühnereiweiß ersichtlich. Abweichungen der Elugramme des Poly(2-methyl-2-oxazolin)s deuten auf eine Modifikation während der Inkubation hin, die jedoch vermutlich nicht enzymatischen Ursprungs ist. Im Gegensatz dazu zeigen die Polysarkosin-Proben in Abhängigkeit der entsprechenden C- und N-terminalen Gruppen charakteristische Elugrammmodifikationen, welche auf die Aktivität von Exo- und Endopeptidasen hindeuten. KW - Biologischer Abbau KW - Polymere KW - Bioabbaubarkeit KW - Polyethylenglycol KW - Polypeptoide KW - Poly(2-oxazolin)e KW - Biodegradability KW - Polyethylene glycol KW - Polypeptoids KW - Poly(2-oxazoline)s Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-158683 ER - TY - JOUR A1 - Szczerba, Wojciech A1 - Zukrowski, Jan A1 - Przybylski, Marek A1 - Sikora, Marcin A1 - Safonova, Olga A1 - Shmeliov, Aleksey A1 - Nicolosi, Valeria A1 - Schneider, Michael A1 - Granath, Tim A1 - Oppmann, Maximilian A1 - Straßer, Marion A1 - Mandel, Karl T1 - Pushing up the magnetisation values for iron oxide nanoparticles via zinc doping: X-ray studies on the particle's sub-nano structure of different synthesis routes JF - Physical Chemistry Chemical Physics N2 - The maximum magnetisation (saturation magnetisation) obtainable for iron oxide nanoparticles can be increased by doping the nanocrystals with non-magnetic elements such as zinc. Herein, we closely study how only slightly different synthesis approaches towards such doped nanoparticles strongly influence the resulting sub-nano/atomic structure. We compare two co-precipitation approaches, where we only vary the base (NaOH versus NH\(_3\)), and a thermal decomposition route. These methods are the most commonly applied ones for synthesising doped iron oxide nanoparticles. The measurable magnetisation change upon zinc doping is about the same for all systems. However, the sub-nano structure, which we studied with Mossbauer and X-ray absorption near edge spectroscopy, differs tremendously. We found evidence that a much more complex picture has to be drawn regarding what happens upon Zn doping compared to what textbooks tell us about the mechanism. Our work demonstrates that it is crucial to study the obtained structures very precisely when "playing'' with the atomic order in iron oxide nanocrystals. KW - Ferrite KW - FE Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-187390 VL - 18 IS - 36 ER - TY - JOUR A1 - Straßer, Marion A1 - Schrauth, Joachim H. X. A1 - Dembski, Sofia A1 - Haddad, Daniel A1 - Ahrens, Bernd A1 - Schweizer, Stefan A1 - Christ, Bastian A1 - Cubukova, Alevtina A1 - Metzger, Marco A1 - Walles, Heike A1 - Jakob, Peter M. A1 - Sextl, Gerhard T1 - Calcium fluoride based multifunctional nanoparticles for multimodal imaging JF - Beilstein Journal of Nanotechnology N2 - New multifunctional nanoparticles (NPs) that can be used as contrast agents (CA) in different imaging techniques, such as photoluminescence (PL) microscopy and magnetic resonance imaging (MRI), open new possibilities for medical imaging, e.g., in the fields of diagnostics or tissue characterization in regenerative medicine. The focus of this study is on the synthesis and characterization of CaF\(_{2}\):(Tb\(^{3+}\),Gd\(^{3+}\)) NPs. Fabricated in a wet-chemical procedure, the spherical NPs with a diameter of 5–10 nm show a crystalline structure. Simultaneous doping of the NPs with different lanthanide ions, leading to paramagnetism and fluorescence, makes them suitable for MR and PL imaging. Owing to the Gd\(^{3+}\) ions on the surface, the NPs reduce the MR T\(_{1}\) relaxation time constant as a function of their concentration. Thus, the NPs can be used as a MRI CA with a mean relaxivity of about r = 0.471 mL·mg\(^{−1}\)·s\(^{−1}\). Repeated MRI examinations of four different batches prove the reproducibility of the NP synthesis and determine the long-term stability of the CAs. No cytotoxicity of NP concentrations between 0.5 and 1 mg·mL\(^{−1}\) was observed after exposure to human dermal fibroblasts over 24 h. Overall this study shows, that the CaF\(_{2}\):(Tb\(^{3+}\),Gd\(^{3+}\)) NPs are suitable for medical imaging. KW - calcium fluoride nanoparticles KW - magnetic resonance imaging (MRI) KW - multifunctional nanoparticles KW - multimodal imaging KW - photoluminescence Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-170657 VL - 8 ER - TY - JOUR A1 - Staab, Thorsten E. M. A1 - Folegati, Paola A1 - Wolfertz, Iris A1 - Puska, Martti J. T1 - Stability of Cu-precipitates in Al-Cu alloys JF - Applied Sciences N2 - We present first principle calculations on formation and binding energies for Cu and Zn as solute atoms forming small clusters up to nine atoms in Al-Cu and Al-Zn alloys. We employ a density-functional approach implemented using projector-augmented waves and plane wave expansions. We find that some structures, in which Cu atoms are closely packed on {100}-planes, turn out to be extraordinary stable. We compare the results with existing numerical or experimental data when possible. We find that Cu atoms precipitating in the form of two-dimensional platelets on {100}-planes in the fcc aluminum are more stable than three-dimensional structures consisting of the same number of Cu-atoms. The preference turns out to be opposite for Zn in Al. Both observations are in agreement with experimental observations. KW - aluminum copper alloys KW - Guinier-Preston zones KW - precipitates KW - ab initio calculations KW - DFT-LDA Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176866 VL - 8 IS - 6 ER - TY - THES A1 - Späth [geb. Lutz], Johanna T1 - Oberflächenfunktionalisierte Gold- und Silbernanopartikel auf Basis von Thioether-Poly(glycidol) für potenzielle biomedizinische Anwendungen - Auswirkungen auf Stabilität, Proteinkoronabildung und Biodistribution T1 - Surface-Functionalized Gold and Silver Nanoparticles Based on Thioether-Poly(glycidol) for Potential Biomedical Application – Impact on Stability, Protein Corona Formation and Biodistribution N2 - Based on previous results showing that thioether modification of gold nanoparticles (AuNPs), especially coating with a multivalent system, yielded in excellent colloidal stability, the first aim of this thesis was to prove whether functionalization of silver nanoparticles (AgNPs) with thioether also has a comparable or even enhanced stabilization efficacy compared with the gold standard of coating with thiols and, particularly, whether the multivalency of polymers leads to stable AgNPs conjugates. Herein, AgNPs coated with mono- and multivalent thiol- and thioether polymers were prepared to systematically investigate the adsorption kinetics onto the silver surface as well as the colloidal stability after exposure to different conditions relevant for biomedical application. Although the thioether-polymers showed a slower immobilization onto AgNPs, same or mostly even better stabilization was exhibited than for the thiol analogs. As multivalent thioether-poly(glycidol) (PG) is already proven as a promising candidate for AuNP modification and stabilization, the second aim of this thesis was to examine the stealth behavior of thioether-PG, side-chain functionalized with various hydrophobic (alkyl and cholesteryl) units, to gain a deeper understanding of AuNP surface functionalization in terms of protein adsorption and their subsequent cellular uptake by human monocyte-derived macrophages. For this purpose, citrate-stabilized AuNPs were modified with the amphiphilic polymers by ligand exchange reaction, followed by incubation in human serum. The various surface amphiphilicities affected protein adsorption to a certain extent, with less hydrophobic particle layers leading to a more inhibited protein binding. Especially AuNPs functionalized with PG carrying the longest alkyl chain showed differences in the protein corona composition compared to the other polymer-coated NPs. In addition, PGylation, and especially prior serum incubation, of the NPs exhibited reduced macrophage internalization. As the use of mammals for in vivo experiments faces various challenges including increasing regulatory hurdles and costs, the third aim of this thesis was to validate larvae of the domestic silkworm Bombyx mori as an alternative invertebrate model for preliminary in vivo research, using AuNPs with various surface chemistry (one PEG-based modification and three PG-coatings with slightly hydrophobic functionalization, as well as positively and negatively charges) for studying their biodistribution and elimination. 6 h and 24 h after intra-hemolymph injection the Au content in different organ compartments was measured with ICP-MS, showing that positively charged particles appeared to be eliminated most rapidly through the midgut, while AuNPs modified with PEG, alkyl-functionalized PG and negatively charged PG exhibited long-term bioavailability in the silkworm body. N2 - Basierend auf früheren Ergebnissen, die zeigten, dass die Thioether-Modifikation von Gold-Nanopartikeln (AuNPs), insbesondere die Beschichtung mit einem multivalenten System, zu einer hervorragenden kolloidalen Stabilität führt, war das erste Ziel dieser Arbeit zu nachzuweisen, ob die Funktionalisierung von Silber-Nanopartikeln (AgNPs) mit Thioether-Polymeren ebenfalls eine vergleichbare oder sogar verbesserte Stabilisierungseffizienz im Vergleich zur Beschichtung mit Thiolen aufweist und ob insbesondere die Multivalenz der Polymere zu stabilen AgNP-Konjugaten führt. Es wurden AgNPs hergestellt, die mit mono- und multivalenten Thiol- und Thioether-Polymeren beschichtet waren, um die Adsorptionskinetik an der Silberoberfläche sowie die kolloidale Stabilität nach Einwirkung verschiedener, für biomedizinische Anwendungen relevanter Bedingungen systematisch zu untersuchen. Obwohl die Thioether-Polymere eine langsamere Immobilisierung auf AgNPs zeigten, war die Stabilisierung gleich oder meist sogar besser als bei den Thiol-Analoga. Nachdem sich multivalentes Thioether-Poly(glycidol) (PG) bereits als vielversprechender Kandidat für die Modifizierung und Stabilisierung von AuNP erwiesen hat, bestand das zweite Ziel dieser Arbeit darin, das „Stealth“-Verhalten von PG, das mit verschiedenen hydrophoben (Alkyl- und Cholesteryl-) Einheiten funktionalisiert wurde, zu untersuchen. Dadurch sollte ein besseres Verständnis der AuNP-Oberflächenfunktionalisierung im Hinblick auf die Proteinadsorption und die anschließende zelluläre Aufnahme durch menschliche Makrophagen erlangt werden. Zu diesem Zweck wurden Citrat-stabilisierte AuNPs mit den amphiphilen Polymeren durch Ligandenaustauschreaktion modifiziert und anschließend in menschlichem Serum inkubiert. Die verschiedenen Oberflächen-Amphiphilizitäten beeinflussten die Proteinadsorption in gewissem Maße, wobei weniger hydrophobe Partikelschichten zu einer reduzierteren Proteinanreicherung führten. Insbesondere AuNPs, die mit PG mit der längsten Alkylkette funktionalisiert waren, zeigten Unterschiede in der Zusammensetzung der Proteinkorona im Vergleich zu den anderen polymerbeschichteten Partikeln. Darüber hinaus führte die PGylierung und insbesondere die vorherige Seruminkubation der NPs zu einer geringeren Internalisierung durch Makrophagen. Da die Verwendung von Säugetieren für In-vivo-Experimente mit verschiedenen Herausforderungen verbunden ist, wie zum Beispiel zunehmende regulatorische Hürden und Kosten, bestand das dritte Ziel dieser Arbeit darin, Larven der heimischen Seidenraupe Bombyx mori als alternatives wirbelloses Tiermodell für erste In-vivo-Forschungen zu prüfen, wobei AuNPs mit unterschiedlicher Oberflächenchemie (eine PEG-basierte Modifikation und drei PG-Beschichtungen mit leicht hydrophober Funktionalisierung sowie positiven und negativen Ladungen) zur Untersuchung ihrer Biodistribution und Eliminierung verwendet wurden. 6 Stunden und 24 Stunden nach der Injektion in die Hämolymphe wurde der Au-Gehalt in verschiedenen Organen mit ICP-MS gemessen. Unter allen getesteten AuNPs schienen positiv geladene Partikel am schnellsten durch den Mitteldarm eliminiert zu werden, während mit PEG, alkylfunktionalisiertem PG und negativ geladenem PG modifizierte AuNPs eine langfristige Bioverfügbarkeit im Seidenraupenkörper aufwiesen. KW - Nanopartikel KW - Gold- und Silbernanopartikel KW - Thioether-Poly(glycidol)-Beschichtung KW - Colloidal stability KW - Protein corona KW - Biodistribution Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-350662 ER -