TY - JOUR A1 - Grande, Vincenzo A1 - Soberats, Bartolome A1 - Herbst, Stefanie A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Hydrogen-bonded perylene bisimide J-aggregate aqua material N2 - A new twelvefold methoxy-triethyleneglycol-jacketed tetraphenoxy-perylene bisimide (MEG-PBI) amphiphile was synthesized that self-assembles into two types of supramolecular aggregates in water: red-coloured aggregates of low order and with weak exciton coupling among the PBIs and blue-coloured strongly coupled J-aggregates consisting of a highly ordered hydrogen-bonded triple helix of PBIs. At room temperature this PBI is miscible with water at any proportions which enables the development of robust dye aggregates in solution, in hydrogel states and in lyotropic liquid crystalline states. In the presence of 60–95 wt% water, self-standing coloured hydrogels exhibit colour changes from red to blue accompanied by a fluorescence light-up in the far-red region upon heating in the range of 30–50 °C. This phenomenon is triggered by an entropically driven temperature-induced hydrogen-bond-directed slipped stacking arrangement of the MEG-PBI chromophores within structurally well-defined J-aggregates. This versatile aqua material is the first example of a stable PBI J-aggregate in water. We anticipate that this study will open a new avenue for the development of biocompatible functional materials based on self-assembled dyes and inspire the construction of other hydrogen-bonded supramolecular materials in the highly competitive solvent water. KW - self-assembly KW - dyes KW - aqua material Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204715 UR - https://doi.org/10.1039/C8SC02409J SN - 2041-6539 VL - 9 ER - TY - JOUR A1 - Dostál, Jakub A1 - Fennel, Franziska A1 - Koch, Federico A1 - Herbst, Stefanie A1 - Würthner, Frank A1 - Brixner, Tobias T1 - Direct observation of exciton–exciton interactions JF - Nature Communications N2 - Natural light harvesting as well as optoelectronic and photovoltaic devices depend on efficient transport of energy following photoexcitation. Using common spectroscopic methods, however, it is challenging to discriminate one-exciton dynamics from multi-exciton interactions that arise when more than one excitation is present in the system. Here we introduce a coherent two-dimensional spectroscopic method that provides a signal only in case that the presence of one exciton influences the behavior of another one. Exemplarily, we monitor exciton diffusion by annihilation in a perylene bisimide-based J-aggregate. We determine quantitatively the exciton diffusion constant from exciton–exciton-interaction 2D spectra and reconstruct the annihilation-free dynamics for large pump powers. The latter enables for ultrafast spectroscopy at much higher intensities than conventionally possible and thus improves signal-to-noise ratios for multichromophore systems; the former recovers spatio–temporal dynamics for a broad range of phenomena in which exciton interactions are present. KW - energy transfer KW - self-assembly KW - optical spectroscopy Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-226271 VL - 9 ER - TY - JOUR A1 - Herbst, Stefanie A1 - Soberats, Bartolome A1 - Leowanawat, Pawaret A1 - Stolte, Matthias A1 - Lehmann, Matthias A1 - Würthner, Frank T1 - Self-assembly of multi-stranded perylene dye J-aggregates in columnar liquid-crystalline phases JF - Nature Communications N2 - Many discoid dyes self-assemble into columnar liquid-crystalline (LC) phases with packing arrangements that are undesired for photonic applications due to H-type exciton coupling. Here, we report a series of crystalline and LC perylene bisimides (PBIs) self-assembling into single or multi-stranded (two, three, and four strands) aggregates with predominant J-type exciton coupling. These differences in the supramolecular packing and optical properties are achieved by molecular design variations of tetra-bay phenoxy-dendronized PBIs with two N–H groups at the imide positions. The self-assembly is driven by hydrogen bonding, slipped π–π stacking, nanosegregation, and steric requirements of the peripheral building blocks. We could determine the impact of the packing motifs on the spectroscopic properties and demonstrate different J- and H-type coupling contributions between the chromophores. Our findings on structure–property relationships and strong J-couplings in bulk LC materials open a new avenue in the molecular engineering of PBI J-aggregates with prospective applications in photonics. KW - liquid crystals KW - self-assembly Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-319914 VL - 9 ER - TY - JOUR A1 - He, Tao A1 - Wu, Yanfei A1 - D'Avino, Gabriele A1 - Schmidt, Elliot A1 - Stolte, Matthias A1 - Cornil, Jérôme A1 - Beljonne, David A1 - Ruden, P. Paul A1 - Würthner, Frank A1 - Frisbie, C. Daniel T1 - Crystal step edges can trap electrons on the surfaces of n-type organic semiconductors JF - Nature Communications N2 - Understanding relationships between microstructure and electrical transport is an important goal for the materials science of organic semiconductors. Combining high-resolution surface potential mapping by scanning Kelvin probe microscopy (SKPM) with systematic field effect transport measurements, we show that step edges can trap electrons on the surfaces of single crystal organic semiconductors. n-type organic semiconductor crystals exhibiting positive step edge surface potentials display threshold voltages that increase and carrier mobilities that decrease with increasing step density, characteristic of trapping, whereas crystals that do not have positive step edge surface potentials do not have strongly step density dependent transport. A device model and microelectrostatics calculations suggest that trapping can be intrinsic to step edges for crystals of molecules with polar substituents. The results provide a unique example of a specific microstructure–charge trapping relationship and highlight the utility of surface potential imaging in combination with transport measurements as a productive strategy for uncovering microscopic structure–property relationships in organic semiconductors. KW - electronic and spintronic devices KW - electronic devices KW - scanning probe microscopy Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-227957 VL - 9 ER - TY - JOUR A1 - Gole, Bappaditya A1 - Stepanenko, Vladimir A1 - Rager, Sabrina A1 - Grüne, Matthias A1 - Medina, Dana D. A1 - Bein, Thomas A1 - Würthner, Frank A1 - Beuerle, Florian T1 - Microtubular Self-Assembly of Covalent Organic Frameworks JF - Angewandte Chemie International Edition N2 - Despite significant progress in the synthesis of covalent organic frameworks (COFs), reports on the precise construction of template-free nano- and microstructures of such materials have been rare. In the quest for dye-containing porous materials, a novel conjugated framework DPP-TAPP-COF with an enhanced absorption capability up to λ=800 nm has been synthesized by utilizing reversible imine condensations between 5,10,15,20-tetrakis(4-aminophenyl)porphyrin (TAPP) and a diketopyrrolopyrrole (DPP) dialdehyde derivative. Surprisingly, the obtained COF exhibited spontaneous aggregation into hollow microtubular assemblies with outer and inner tube diameters of around 300 and 90 nm, respectively. A detailed mechanistic investigation revealed the time-dependent transformation of initial sheet-like agglomerates into the tubular microstructures. KW - covalent organic frameworks KW - diketopyrrolopyrroles KW - imines KW - microtubes KW - porphyrins Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-227373 VL - 57 ER - TY - JOUR A1 - Sol, Jeroen A. H. P. A1 - Dehm, Volker A1 - Hecht, Reinhard A1 - Würthner, Frank A1 - Schenning, Albertus P. H. J. A1 - Debije, Michael G. T1 - Temperature-Responsive Luminescent Solar Concentrators: Tuning Energy Transfer in a Liquid Crystalline Matrix JF - Angewandte Chemie International Edition N2 - Temperature-responsive luminescent solar concentrators (LSCs) have been fabricated in which the Förster resonance energy transfer (FRET) between a donor–acceptor pair in a liquid crystalline solvent can be tuned. At room temperatures, the perylene bisimide (PBI) acceptor is aggregated and FRET is inactive; while after heating to a temperature above the isotropic phase of the liquid crystal solvent, the acceptor PBI completely dissolves and FRET is activated. This unusual temperature control over FRET was used to design a color-tunable LSC. The device has been shown to be highly stable towards consecutive heating and cooling cycles, making it an appealing device for harvesting otherwise unused solar energy. KW - energy transfer KW - fluorescence KW - liquid crystals KW - luminescent solar concentrators KW - perylene dyes Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-238778 VL - 57 ER - TY - JOUR A1 - Spenst, Peter A1 - Young, Ryan M. A1 - Wasielewski, Michael R. A1 - Würthner, Frank T1 - Guest and solvent modulated photo-driven charge separation and triplet generation in a perylene bisimide cyclophane JF - Chemical Science N2 - Cofacial positioning of two perylene bisimide (PBI) chromophores at a distance of 6.5 angstrom in a cyclophane structure prohibits the otherwise common excimer formation and directs photoexcited singlet state relaxation towards intramolecular symmetry-breaking charge separation (τ\(_{CS}\) = 161 +/- 4 ps) in polar CH\(_2\)Cl\(_2\), which is thermodynamically favored with a Gibbs free energy of ΔG\(_{CS}\) = -0.32 eV. The charges then recombine slowly in τ\(_{CR}\) = 8.90 +/- 0.06 ns to form the PBI triplet excited state, which can be used subsequently to generate singlet oxygen in 27% quantum yield. This sequence of events is eliminated by dissolving the PBI cyclophane in non-polar toluene, where only excited singlet state decay occurs. In contrast, complexation of electron-rich aromatic hydrocarbons by the host PBI cyclophane followed by photoexcitation of PBI results in ultrafast electron transfer (<10 ps) from the guest to the PBI in CH\(_2\)Cl\(_2\). The rate constants for charge separation and recombination increase as the guest molecules become easier to oxidize, demonstrating that charge separation occurs close to the peak of the Marcus curve and the recombination lies far into the Marcus inverted region. KW - photoinduced electron transfer KW - Marcus inverted region KW - cyclic perylene bisimide KW - PBI cyclophane Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-191252 VL - 7 IS - 8 ER - TY - JOUR A1 - Plötz, P.-A. A1 - Polyutov, S. P. A1 - Ivanov, S. D. A1 - Fennel, F. A1 - Wolter, S. A1 - Niehaus, T. A1 - Xie, Z. A1 - Lochbrunner, S. A1 - Würthner, Frank A1 - Kühn, O. T1 - Biphasic aggregation of a perylene bisimide dye identified by exciton-vibrational spectra JF - Physical Chemistry Chemical Physics N2 - The quantum efficiency of light emission is a crucial parameter of supramolecular aggregates that can be tuned by the molecular design of the monomeric species. Here, we report on a strong variation of the fluorescence quantum yield due to different phases of aggregation for the case of a perylene bisimide dye. In particular, a change of the dominant aggregation character from H- to J-type within the first aggregation steps is found, explaining the observed dramatic change in quantum yield. This behaviour is rationalised by means of a systematic study of the intermolecular potential energy surfaces using the time-dependent density functional based tight-binding (TD-DFTB) method. This provides a correlation between structural changes and a coupling strength and supports the notion of H- type stacked dimers and J-type stack-slipped dimers. The exciton-vibrational level structure is modelled by means of an excitonic dimer model including two effective vibrational modes per monomer. Calculated absorption and fluorescence spectra are found to be in reasonable agreement with experimental ones, thus supporting the conclusion on the aggregation behaviour. KW - Potential-energy curves KW - Simulations KW - Molecular-dynamics KW - Systems KW - Fluorescence KW - Sracking KW - Pathway KW - Dimers KW - State Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-187387 VL - 18 IS - 36 ER - TY - JOUR A1 - Gershberg, Jana A1 - Fennel, Franziska A1 - Rehm, Thomas H. A1 - Lochbrunner, Stefan A1 - Würthner, Frank T1 - Anti-cooperative supramolecular polymerization: a new K\(_2\)-K model applied to the self-assembly of perylene bisimide dye proceeding via well-defined hydrogen-bonded dimers JF - Chemical Science N2 - A perylene bisimide dye bearing amide functionalities at the imide positions derived from amino acid L-alanine and a dialkoxy-substituted benzyl amine self-assembles into tightly bound dimers by π-π-stacking and hydrogen bonding in chloroform. In less polar or unpolar solvents like toluene and methylcyclohexane, and in their mixtures, these dimers further self-assemble into extended oligomeric aggregates in an anti-cooperative process in which even numbered aggregates are highly favoured. The stepwise transition from dimers into oligomers can not be properly described by conventional K\(_2\)-K model, and thus a new K\(_2\)-K aggregation model has been developed, which interpretes the present anti-cooperative supramolecular polymerization more appropriately. The newly developed K\(_2\)-K model will be useful to describe self-assembly processes of a plethora of other π-conjugated molecules that are characterized by a favored dimer species. KW - π–π Stacking KW - nucleation elongation KW - upramolecular polymerization process KW - dimerization KW - K2–K model Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-191428 VL - 7 IS - 3 ER - TY - JOUR A1 - Görl, Daniel A1 - Soberats, Bartolome A1 - Herbst, Stefanie A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Perylene bisimide hydrogels and lyotropic liquid crystals with temperature-responsive color change JF - Chemical Science N2 - The self-assembly of perylene bisimide (PBI) dyes bearing oligo ethylene glycol (OEG) units in water affords responsive functional nanostructures characterized by their lower critical solution temperature (LCST). Tuning of the LCST is realized by a supramolecular approach that relies on two structurally closely related PBI–OEG molecules. The two PBIs socially co-assemble in water and the resulting nanostructures exhibit a single LCST in between the transition temperatures of the aggregates formed by single components. This permits to precisely tune the transition from a hydrogel to a lyotropic liquid crystal state at temperatures between 26 and 51 °C by adjusting the molar fraction of the two PBIs. Owing to concomitant changes in PBI–PBI interactions this phase transition affords a pronounced color change with “fluorescence-on” response that can be utilized as a smart temperature sensory system. KW - perylene bisimide hydrogels Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-162459 VL - 7 IS - 11 ER -