TY - THES A1 - Ryma, Matthias T1 - Exploiting the Thermoresponsive Properties of Poly(2-oxazoline)s for Biofabrication T1 - Anwendung der Thermoresponsivität von Poly(2-oxazolin) für die Biofabrikation N2 - In this thesis, non-modified POx, namely PnPrOx and PcycloPrOx, with an LCST in the physiological range between 20 and 37°C have been utilized as materials for three different biofabrication approaches. Their thermoresponsive behavior and processability were exploited to establish an easy-to-apply coating for cell sheet engineering, a novel method to create biomimetic scaffolds based on aligned fibrils via Melt Electrowriting (MEW) and the application of melt electrowritten sacrificial scaffolds for microchannel creation for hydrogels. Chapter 3 describes the establishment of a thermoresponsive coating for tissue culture plates. Here, PnPrOx was simply dissolved in water and dried in well plates and petri dishes in an oven. PnPrOx adsorbed to the surface, and the addition of warm media generated a cell culture compatible coating. It was shown that different cell types were able to attach and proliferate. After confluency, temperature reduction led to the detachment of cell sheets. Compared to standard procedures for surface coating, the thermoresponsive polymer is not bound covalently to the surface and therefore does not require specialized equipment and chemical knowledge. However, it should be noted that the detachment of the cell layer requires the dissolution of the PnPrOx-coating, leading to possible polymer contamination. Although it is only a small amount of polymer dissolved in the media, the detached cell sheets need to be washed by media exchange for further processing if required. ... N2 - In dieser Dissertation wurden die unmodifizierten Poly(2-oxazoline) PnPrOx und PcycloProx, welche eine LCST im physiologischen Bereich zwischen 20 und 37°C aufweisen, für drei verschiedene Biofabrikationsansätze verwendet. Deren Thermoresponsivität und Prozessierbarkeit wurde genutzt, um ein simples Beschichten von Oberflächen für Cell Sheet Engineering, eine neue Methode zur Herstellung biomimetischer Gerüststrukturen basierend auf der Generierung von Fibrillenbündeln via Melt Electrowriting und die Anwendung als Opferstrukturen zur Generierung von Mikrokanälen in Hydrogelen zu etablieren. KW - Thermoresponsive Polymere KW - Dihydrooxazole KW - 3D-Druck KW - Melt Electrowriting KW - Biofabrikation KW - Poly(2-oxazoline) KW - Cell Sheet Engineering KW - Vaskularisation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-247462 ER - TY - THES A1 - Lübtow, Michael M. T1 - Structure-property relationships in poly(2-oxazoline)/poly(2-oxazine) based drug formulations T1 - Struktur-Eigenschafts-Beziehungen in Poly(2-oxazolin)/Poly(2-oxazin) basierten Wirkstoffformulierungen N2 - According to estimates, more than 40% of all new chemical entities developed in pharmaceutical industry are practically insoluble in water. Naturally, the demand for excipients which increase the water solubility and thus, the bioavailability of such hydrophobic drugs is enormous. Poly(2-oxazoline)s (POx) are currently intensively discussed as highly versatile class of biomaterials. Although selected POx based micellar drug formulations exhibit extraordinarily high drug loadings > 50 wt.% enabling high anti-tumor efficacies in vivo, the formulation of other hydrophobic compounds has failed. This casts doubt on the general understanding in which a hydrophobic active pharmaceutical ingredient is dissolved rather unspecifically in the hydrophobic core of the micelles following the fundamental concept of “like dissolves like”. Therefore, a closer look at the interactions between all components within a formulation becomes increasingly important. To do so, a large vehicle platform was synthesized, loaded with various hydrophobic drugs of different structure, and the formulations subsequently characterized with conventional and less conventional techniques. The obtained in-depth insights helped to develop a more thorough understanding about the interaction of polymer and incorporated API finally revealing morphologies deviating from a classical core/shell structure. During these studies, the scarcely investigated polymer class of poly(2-oxazine)s (POzi) was found as promising drug-delivery vehicle for hydrophobic drugs. Apart from this fundamental research, the anti-tumor efficacy of the two APIs curcumin and atorvastatin has been studied in more detail. To increase the scope of POx and POzi based formulations designed for intravenous administration, a curcumin loaded hydrogel was developed as injectable drug-depot. N2 - Schätzungen zufolge sind mehr als 40% aller „new chemical entities“, welche in der pharmazeutischen Industrie entwickelt werden, wasserunlöslich. Aus diesem Grund ist der Bedarf an Zusatzstoffen, welche die Wasserlöslichkeit und dadurch die Bioverfügbarkeit erhöhen, enorm. Poly(2-oxazolin)e (POx) werden derzeitig intensiv als vielseitig einsetzbare Biomaterialien untersucht. Obwohl bestimmte POx basierte, mizellare Wirkstoffformulierungen außergewöhnlich hohe Beladungskapazitäten > 50 Gew.% aufwiesen und dadurch ausgeprägte anti-Tumor Effektivität in vivo ermöglichten, schlug die Formulierung anderer hydrophober Stoffe fehl. Dies lässt Zweifel an dem altbewährten Konzept aufkommen, in welchem hydrophobe Arzneistoffe mehr oder weniger unspezifisch im hydrophoben Kern einer Mizelle gelöst werden. Aus diesem Grund ist ein genauerer Blick auf die Interaktionen zwischen allen Bestandteilen einer Formulierung vonnöten. Deshalb wurde eine große Polymerplattform synthetisiert, mit verschiedenen hydrophoben Wirkstoffen unterschiedlicher Struktur beladen und die Formulierungen im Anschluss mit herkömmlichen und weniger herkömmlichen Methoden charakterisiert. Die daraus erhaltenen Einblicke ermöglichten es ein umfassenderes Verständnis über die Interaktionen von Polymer und Wirkstoff zu entwickeln. Innerhalb dieser Studien wurden Aggregate charakterisiert, welche von einer klassischen Kern/Schale Morphologie abwichen. Des Weiteren konnte die kaum erforschte Polymerklasse der Poly(2-oxazin)e (POzi) als vielversprechende Wirkstoffträgerplattform für hydrophobe Wirkstoffe charakterisiert werden. Von dieser Grundlagenforschung abgesehen, wurde die anti-Tumor Effektivität von Curcumin und Atorvastatin Nanoformulierungen untersucht. Um den Anwendungsbereich der POx und POzi basierten Wirkstoffformulierungen, welche für intravenöse Verabreichung entwickelt wurden, zu erweitern, wurde ein Curcumin beladenes Hydrogel als injizierbares Wirkstoffdepot entwickelt. KW - Polymere KW - Nanomedizin KW - Wirkstoff-Träger-System KW - Ringöffnungspolymerisation KW - Hydrogel KW - Drug-Polymer Interactions KW - Poly(2-oxazoline) KW - Poly(2-oxazine) Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193387 ER -