TY - THES A1 - Maier, Florian C. T1 - Spectromicroscopic characterisation of the formation of complex interfaces T1 - Spektromikroskopische Charakterisierung der Bildung komplexer Grenzflächen N2 - Within the framework of this thesis the mechanisms of growth and reorganisation of surfaces within the first few layers were investigated that are the basis for the fabrication of high quality thin films and interfaces. Two model systems, PTCDA/Ag(111) and CdSe/ZnSe quantum dots (QD), were chosen to study such processes in detail and to demonstrate the power and improvements of the aberration corrected spectromicroscope SMART [1] simultaneously. The measurements benefit especially from the enhanced transmission of the microscope and also from its improved resolution. SMART, the first double–aberration corrected instrument of its kind [2], provided comprehensive methods (LEEM/PEEM, μ–LEED, μ–XPS) to study in–situ and in real time the surface reorganisation and to determine morphology, local structure and local chemical composition of the resulting thin film. Complementarily, a commercial AFM [3] was used ex–situ. XPEEM and μ–XPS measurements were made possible by attaching SMART to the high flux density beamline of the soft–X–ray source BESSY–II [4]. PTCDA/Ag(111) – Growth and structure of the first two layers Although PTCDA/Ag(111) is one of the most intensely studied model systems for the growth of organic semiconductor thin films, it still offers new insights into a complex growth behaviour. This study enlightens the temperature dependant influence of morphological features as small as monatomic Ag steps on the growth process of the first two layers. At low temperatures, single Ag steps act as diffusion barriers. But interdiffusion was observed already for the 2nd layer whereas domain boundaries in the 1st PTCDA–layer persist for crystallite growth in the 2nd layer. 1st layer islands are more compact and the more dendritic development of the 2nd layer indicates reduced interaction strength between 2nd and 1st layer. These findings were explained by a model consisting of structural and potential barriers. The second part of the PTCDA study reveals a variety of phases that appears only if at least two layers are deposited. Besides the six known rotational domains of the interface system PTCDA/Ag(111) [5], a further manifold of structures was discovered. It does not only show a surprising striped image contrast, but the 2nd layer also grows in an elongated way along these so–called ’ripples’. The latter show a rather large period and were found in a wide temperature range. Additionally the μ-LEED pattern of such a domain shows a new super–superstructure as well. This phase is explained by a structural model that introduces a rotated, more relaxed domain in the 2nd layer that does not exist in the first layer. Its structural parameters are similar to those of the bulk unitcells of PTCDA. The model is confirmed by the observation of two different rotational domains that grow on top of one single ’substrate’ domain in the 1st layer. The orientations of the ripple phases fit as well to the predictions of the model. The growth direction along the ripples corresponds to the short diagonal of the super–superstructure unitcell with diamond–like shape. CdSe/ZnSe – Inverse structuring by sublimation of an α-Te cap With the second model system the formation of CdSe quantum dots (QD) from strained epi-layers was investigated. In this case the structures do not form during deposition, but rather during sublimation of the so–called ‘ignition cap’. For these pilot experiments not only the process of QD formation itself was of interest, but also the portability of the preparation and the prevention of contaminations. It was found that the α-Se is well suited for capping and the last step of the QD preparation, the sublimation of the α-Te cap, needs a sufficiently high rate in rise of temperature. Subsequently the cap, the process of desorption and the final surface with the quantum structures were investigated in detail. The cap was deposited by the MBE-group in Würzburg as an amorphous Te layer but was found to contain a variety of structures. Holes, cracks, and micro–crystallites within an α-Te matrix were identified. Sublimation of the “ignition cap” was observed in real–time. Thus the discovered cap-structures could be correlated with the newly formed features as, e.g., QDs on the bare CdSe surface. Since CdSe/ZnSe QDs prefer to form in the neighbourhood of the Te μ–crystallites, Te was found to play a major role in their formation process. Different explanations as the impact of Te as a surfactant, an enhanced mobility of adatoms or as stressor nuclei are discussed. The spectromicroscopic characterisation of the CdSe surface with QDs revealed the crystallographic directions. An increased Cd signal of the film was found at positions of former holes. Several possibilities as segregation or surface termination are reviewed, that might explain this slight Cd variation. Therewith, an important step to a detailed understanding of the complex reorganisation process in coating systems could be achieved. N2 - Im Rahmen dieser Arbeit wurden der Schicht– und Grenzflächenpräparation zu Grunde liegende Wachstums– und Reorganisationsmechanismen anhand von zwei Modellsystemen in–situ untersucht. Diese waren auch geeignet, das Potential von SMART [1, 2], dem ersten doppelt aberrationskorrigierten, niederenergetischen Elektronen-Spektromikroskop, in seiner weiter optimierten Version zu demonstrieren. Dabei wurde besonders von der gesteigerten Transmission des Mikroskops, aber auch von der verbesserten Auflösung durch die Aberrationskorrektur profitiert. SMART erlaubt nicht nur Messungen unter UHV–Bedingungen, sondern auch in Echtzeit, wobei zwischen einer Reihe von Methoden (LEEM/PEEM, μ–LEED, μ–XPS) kurzfristig und in–situ gewechselt werden kann. Ergänzt wurden die Messungen mit Hilfe eines kommerziellen AFM [3]. Erst die Installation von SMART an einem Strahlrohr von BESSY–II [4] mit hoher Flussdichte im Bereich der weichen Röntgenstrahlung ermöglichte die XPEEM– und μ–XPS–Messungen. PTCDA/Ag(111) – Wachstum und Struktur der ersten beiden Lagen Das ausgiebig untersuchte Modellsystem PTCDA/Ag(111) sorgt nach wie vor für Überraschungen. So konnte bei den vorgestellten Untersuchungen der Einfluss der Morphologie auf den Wachstumsprozess der ersten beiden Lagen detailliert beobachtet werden. Monoatomare Ag–Stufen fungieren dabei als T–abhängige Diffusionsbarrieren für die PTCDA–Moleküle in der ersten Lage. Hingegen ist die Diffusion von Molekülen der zweiten Lage über Domänengrenzen der ersten Lage hinweg leicht möglich, wenngleich PTCDA–Domänengrenzen der ersten ML auch für Kristallite in der zweiten Lage begrenzend sind. Das unterschiedliche Domänenwachstumsverhalten wird dadurch erklärt, dass die Wechselwirkungsstärke zwischen zweiter und erster Lage gegenüber der zwischen erster Lage und Ag(111) reduziert ist und dass benachbarte Domänen unterschiedliche Struktur aufweisen. Ein zweiter Teilaspekt beleuchtet den Polymorphismus der zweiten Lage PTCDA auf Ag(111). Neuartige Domänen zeigen nicht nur einen ungewöhnlichen, linear variierenden Kontrast, sondern auch anisotropes Wachstum in einem weiten Temperaturbereich, bevorzugt entlang der sogenannten ’Ripple’. Mit μ–LEED wurde die neue kristallographische Über–Überstruktur charakterisiert. Zudem wurden in Dunkelfeld-LEEM zwei unterschiedliche Rotationsdomänen auf einer einzelnen Substratdomäne beobachtet. Die Abmessungen der Einheitszelle der Moleküle in der zweiten Lage ähneln denen der ersten Lage, sind aber gegenüber diesen um unerwartete 75° gedreht. Zur Erklärung dieser Beobachtungen wird ein Strukturmodell vorgeschlagen, das aus zwei unterschiedlichen und daher verspannt gestapelten PTCDA–Domänen besteht. Derartige Domänen wachsen bevorzugt entlang der „Ripples“ und damit entlang der kurzen Diagonalen der vorgeschlagenen Über-Überstruktur auf. Die vorhergesagten Orientierungen der „Ripples“ wurden ebenfalls nachgewiesen. Der linienförmige Kontrast in der zweiten Lage wird durch eine Oszillation des Lagenabstandes erklärt. CdSe/ZnSe – Rückwirkende Strukturbildung durch Sublimation einer α–Te-Deckschicht Weiterhin wurde die Bildung von CdSe-Quantenpunkten (QD) aus verspannten CdSe/ZnSe(001)-Schichten untersucht, die sich bei Sublimation der Te-Schicht reorganisieren. In Pilotexperimenten mit einem Spektromikroskop an CdSe/ZnSe-Heterostrukturen wurden sowohl der Bildungsprozess der Quantenstrukturen selbst detailliert untersucht, als auch die Tauglichkeit des Kontaminationsschutzes sorgfältig verifiziert. Die in-situ Sublimation der mikromorphen Te-Deckschicht, Auslöser für die QD-Bildung, erfordert ausreichend hohe Heizraten. Schrittweise wurden die Deckschicht, der Desorptionsprozess und die resultierende Oberfläche mit den Quantenstrukturen unter die Lupe genommen. Die als α-Te abgeschiedene Kappe weist eine Vielzahl von Strukturen auf, welche als Löcher, Risse und Mikrokristallite in einer α-Te Matrix identifiziert und charakterisiert wurden. Durch die Echtzeitbeobachtung des Desorptionsprozesses konnten die Positionen der Strukturen in der Kappe mit den zurückbleibenden bzw. neu entstehenden Strukturen wie den Quantenpunkten korreliert werden. Aus der relativen Anordnung der Strukturen wird gefolgert, dass die Präsenz von Tellur bei der Bildung der Quantenpunkte eine wichtige Rolle spielt. Verschiedene Erklärungsansätze wie zum Beispiel die Wirkung als „Surfactant“, Erhöhung der Diffusion und spannungsinduzierte Nukleation werden diskutiert. Die LEED-Charakterisierung der QD-besetzten CdSe-Oberfläche erlaubt die Korrelation mit den kristallographischen Richtungen des Substrats. Das XPEEM-signal weist auf Cd–Segregation unter den Löchern hin, lässt aber auch die Deutung als Cd-terminierte Oberflächenrekonstruktion zu. Damit ist ein erster, wichtiger Schritt zur detaillierten Aufklärung des Reorganisationsprozesses des komplexen Schichtsystems bei der Bildung von selbstorganisierten Quantenpunkten gelungen. KW - Halbleiterschicht KW - Wachstumsprozess KW - Spektroskopie KW - Mikroskopische Technik KW - Perylendianhydrid KW - Silber KW - Quantenpunkt KW - Cadmiumselenid KW - Oberflächenanalyse KW - Röntgenspektroskopie KW - Elektronenmikroskopie KW - Semiconductor KW - organic KW - PTCDA KW - Ag(111) KW - anorganic KW - quantum dot KW - CdSe KW - ZnSe KW - CdTe KW - Spectromicroscopy KW - LEEM KW - XPEEM KW - LEED KW - XPS Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65062 ER - TY - THES A1 - Markert, Sebastian Matthias T1 - Enriching the understanding of synaptic architecture from single synapses to networks with advanced imaging techniques T1 - Vertiefung des Verständnisses synaptischer Architektur von der einzelnen Synapse bis zum Netzwerk mit modernsten bildgebenden Verfahren N2 - Because of its complexity and intricacy, studying the nervous system is often challenging. Fortunately, the small nematode roundworm Caenorhabditis elegans is well established as a model system for basic neurobiological research. The C. elegans model is also the only organism with a supposedly complete connectome, an organism-wide map of synaptic connectivity resolved by electron microscopy, which provides some understanding of how the nervous system works as a whole. However, the number of available data-sets is small and the connectome contains errors and gaps. One example of this concerns electrical synapses. Electrical synapses are formed by gap junctions and difficult to map due to their often ambiguous morphology in electron micrographs, leading to misclassification or omission. On the other hand, chemical synapses are more easily mapped, but many aspects of their mode of operation remain elusive and their role in the C. elegans connectome is oversimplified. A comprehensive understanding of signal transduction of neurons between each other and other cells will be indispensable for a comprehensive understanding of the nervous system. In this thesis, I approach these challenges with a combination of advanced light and electron microscopy techniques. First, this thesis describes a strategy to increase synaptic specificity in connectomics. Specifically, I classify gap junctions with a high degree of confidence. To achieve this, I utilized array tomography (AT). In this thesis, AT is adapted for high-pressure freezing to optimize for structure preservation and for super-resolution light microscopy; in this manner, I aim to bridge the gap between light and electron microscopy resolutions. I call this adaptation super-resolution array tomography (srAT). The srAT approach made it possible to clearly identify and map gap junctions with high precision and accuracy. The results from this study showcased the feasibility of incorporating electrical synapses into connectomes in a systematic manner, and subsequent studies have used srAT for other models and questions. As mentioned above, the C. elegans connectomic model suffers from a shortage of datasets. For most larval stages, including the special dauer larval stage, connectome data is completely missing up to now. To obtain the first partial connectome data-set of the C. elegans dauer larva, we used focused ion-beam scanning electron microscopy (FIB-SEM). This technique offers an excellent axial resolution and is useful for acquiring large volumes for connectomics. Together with our collaborators, I acquired several data-sets which enable the analysis of dauer stage-specific “re-wiring” of the nervous system and thus offer valuable insights into connectome plasticity/variability. While chemical synapses are easy to map relative to electrical synapses, signal transduction via chemical transmitters requires a large number of different proteins and molecular processes acting in conjunction in a highly constricted space. Because of the small spatial scale of the synapse, investigating protein function requires very high resolution, which electron tomography provides. I analyzed electron tomograms of a worm-line with a mutant synaptic protein, the serine/threonine kinase SAD-1, and found remarkable alterations in several architectural features. My results confirm and re-contextualize previous findings and provide new insight into the functions of this protein at the chemical synapse. Finally, I investigated the effectiveness of our methods on “malfunctioning,” synapses, using an amyotrophic lateral sclerosis (ALS) model. In the putative synaptopathy ALS, the mechanisms of motor neuron death are mostly unknown. However, mutations in the gene FUS (Fused in Sarcoma) are one known cause of the disease. The expression of the mutated human FUS in C. elegans was recently shown to produce an ALS-like phenotype in the worms, rendering C. elegans an attractive disease model for ALS. Together with our collaboration partners, I applied both srAT and electron tomography methods to “ALS worms” and found effects on vesicle docking. These findings help to explain electrophysiological recordings that revealed a decrease in frequency of mini excitatory synaptic currents, but not amplitudes, in ALS worms compared to controls. In addition, synaptic endosomes appeared larger and contained electron-dense filaments in our tomograms. These results substantiate the idea that mutated FUS impairs vesicle docking and also offer new insights into further molecular mechanisms of disease development in FUS-dependent ALS. Furthermore, we demonstrated the broader applicability of our methods by successfully using them on cultured mouse motor neurons. Overall, using the C. elegans model and a combination of light and electron microscopy methods, this thesis helps to elucidate the structure and function of neuronal synapses, towards the aim of obtaining a comprehensive model of the nervous system. N2 - Das Nervensystem ist ein definierendes Merkmal aller Tiere, unter anderem verantwortlich für Sinneswahrnehmung, Bewegung und „höhere“ Hirnfunktionen. Wegen dessen Komplexität und Feingliedrigkeit stellt das Erforschen des Nervensystems oft eine Herausforderung dar. Jedoch ist der kleine Fadenwurm Caenorhabditis elegans als Modellsystem für neurobiologische Grundlagenforschung gut etabliert. Erbesitzt eines der kleinsten und unveränderlichsten bekannten Nervensysteme. C.elegans ist auch das einzige Modell, für das ein annähernd vollständiges Konnektom vorliegt, eine durch Elektronenmikroskopie erstellte Karte der synaptischen Verbindungen eines gesamten Organismus, die Einblicke in die Funktionsweise des Nervensystems als Ganzes erlaubt. Allerdings ist die Anzahl der verfügbaren Datensätze gering und das Konnektom enthält Fehler und Lücken. Davon sind beispielsweise elektrische Synapsen betroffen. Elektrische Synapsen werden von Gap Junctions gebildet und sind auf Grund ihrer oft uneindeutigen Morphologie in elektronenmikroskopischen Aufnahmen schwierig zu kartieren, was dazu führt, dass einige falsch klassifiziert oder übersehen werden. Chemische Synapsen sind dagegen einfacher zu kartieren, aber viele Aspekte ihrer Funktionsweise sind schwer zu erfassen und ihre Rolle im Konnektom von C.elegans ist daher zu vereinfacht dargestellt. Ein umfassendes Verständnis der Signaltransduktion von Neuronen untereinander und zu anderen Zellen wird Voraussetzung für ein vollständiges Erfassen des Nervensystems sein. In der vorliegenden Arbeit gehe ich diese Herausforderungen mithilfe einer Kombination aus modernsten licht- und elektronenmikroskopischen Verfahren an. Zunächst beschreibt diese Arbeit eine Strategie, um die synaptische Spezifität in der Konnektomik zu erhöhen, indem ich Gap Junctions mit einem hohen Maß an Genauigkeit klassifiziere. Um dies zu erreichen, nutzte ich array tomography (AT), eine Technik, die Licht- und Elektronenmikrokopie miteinander korreliert. In dieser Arbeit wird AT adaptiert für Hochdruckgefrierung, um die Strukturerhaltung zu optimieren, sowie für ultrahochauflösende Lichtmikroskopie; so wird die Kluft zwischen den Auflösungsbereichen von Licht- und Elektronenmikroskopie überbrückt. Diese Adaption nenne ich super-resolution array tomography (srAT). Der srATAnsatz machte es möglich, Gap Junctions mit hoher Präzision und Genauigkeit klar zu identifizieren. Für diese Arbeit konzentrierte ich mich dabei auf Gap Junctions des retrovesikulären Ganglions von C.elegans. Die Ergebnisse dieser Studie veranschaulichen, wie es möglich wäre, elektrische Synapsen systematisch in Konnektome aufzunehmen. Nachfolgende Studien haben srAT auch auf andere Modelle und Fragestellungen angewandt ... KW - Caenorhabditis elegans KW - Synapse KW - Elektronenmikroskopie KW - Myatrophische Lateralsklerose KW - connectomics KW - focused ion-beam scanning electron microscopy KW - super-resolution array tomography Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-189935 ER - TY - THES A1 - Sandblad, Linda T1 - Seam Binding, a Novel Mechanism for Microtubule Stabilization T1 - Naht Bindung, ein Neuartiger Mechanismus zur Stabilisierung von Mikrotubuli N2 - Microtubules are a fascinating component of the cellular scaffold protein network, the cytoskeleton. These hollow tubular structures are assembled of laterally associated proto-filaments containing ab-tubulin heterodimers in a head to tail arrangement. Accordingly microtubules have a defined polarity, which sets the base for the polarity of the cell. The microtubule lattice can be arranged in two conformations: In the more abundant B-lattice conformation, where the protofilaments interact laterally through a- to a- and b- to b-tubulin contacts and in the less stable A-lattice conformation, where a-tubulin interacts laterally with b-tubulin. In cells the microtubules generally contain 13 protofilaments of which usually one pair interacts in the A-lattice conformation, forming the so-called lattice seam. Microtubule dynamics and interactions are strongly regulated by micro-tubule associate proteins (MAPs). Structural investigations on MAPs and microtubule associated motor proteins in complex with microtubules have become possible in combination with modern electron microscopy (EM) and image processing. We have used biochemistry and different advanced EM techniques to study the interaction between microtubules and the MAP Mal3p in vitro. Mal3p is the sole member of the end-binding protein 1 (EB1) protein family in the fission yeast Schizosaccharomyces pombe. Previous in vivo studies have shown that Mal3p promotes microtubule growth. Our studies with high-resolution unidirectional shadowing EM revealed that Mal3p interacts with the microtubule lattice in a novel way, using binding sites on the microtubule that are different from those reported for other MAPs or motor proteins. Full-length Mal3p preferentially binds between two protofilaments on the microtubule lattice, leaving the rest of the lattice free. A case where Mal3p was found in two adjacent protofilament, revealed an A-lattice conformation on the microtubules, surprisingly indicating specific binding of Mal3p to the microtubule seam. With a lattice enhancer, in form of a b-tubulin binding kinesin motor domain, it was demonstrated that Mal3p stabilizes the seam which is thought to be the weakest part of a microtubule. Further, the presence of Mal3p during microtubule polymerization enhances the closure of protofilament sheets into a tubular organization. Cryo-EM and 3-D helical reconstruction on a monomeric microtubule binding domain of Mal3p, confirm the localization in between the protofilament and result in an accurate localization on the microtubule lattice. The results also indicate Mal3p’s capacity to influence the microtubule lattice conformation. Together, studies approached in vitro demonstrate that an EB1-family homolog not only interacts with the microtubule plus end, but also with the microtubule lattice. The structure of Mal3p interacting with microtubules reveals a new mechanism for microtubule stabilization and further insight on how plus end binding proteins are able promote microtubule growth. These findings further suggest that microtubules exhibit two distinct reaction platforms on their surface that can independently interact with selected MAPs or motors. N2 - Mikrotubuli sind eine faszinierende Komponente des Zytoskeletts einer Zelle. Ihre Struktur entspricht der eines Hohlzylinders. Sie sind aus seitlich assoziierten Proto-filamenten zusammengesetzt, die aus a- und b-Tubulin Untereinheiten bestehen. Diese Heterodimere sind gerichtet, bedingt durch ihre Kopf-Schwanz Anordnung. Folglich besitzen Mikrotubuli eine definierte Polarität, welche die Basis für die Polarität der Zelle bildet. Die Anordnung der Untereinheiten zu einem so genannten Mikrotubulus Gitter kann in zwei Konformationen vorkommen: In der häufigeren B-Gitter Formation, in welcher die Protofilamente seitlich durch a- zu a- und b- zu b-Tubulin interagieren und in der weniger stabilen A-Gitter Konformation, in der a-Tubulin lateral mit b-Tubulin wechselwirkt. In der Zelle vorkommende Mikrotubuli haben grundsätzlich 13 Proto-filamente. Mindestens ein Paar dieser Protofilamente interagiert in der A-Gitter Kon-formation und bildet die so genannte Gitter-Naht (lattice seam). Mikrotubuli Dynamik und Interaktionen sind streng durch Mikrotubuli assoziierte Proteine (MAPs) reguliert. Die Kombination aus moderner Elektronenmikroskopie (EM) und Bild-verarbeitung macht strukturelle Untersuchungen an MAPs und Motorproteinen im Zusammenhang mit Mikrutubuli möglich. Wir haben biochemische und hoch entwickelte EM Techniken benutzt, um die Interaktion zwischen Mikrotubuli und dem Mikrotubuli assoziierten Protein Mal3 in vitro zu untersuchen. Mal3p ist ein Homolog des konservierten Ende-Bindungs Protein 1 (EB1) in der Spalthefe Schizosaccharomyces pombe. Es wurde bereits gezeigt, dass EB1 die Struktur von Mikrotubuli stabilisiert. Mit Hilfe einer speziellen, hochauflösenden EM Schattierungstechnik haben wir demonstriert, dass Mal3p auf neuartige Weise mit dem Mikrotubulus Gitter interagiert. Dabei besetzt Mal3p Bindungsstellen am Mikrotubulus, die sich von denen der anderen MAPs oder Motorproteinen unterscheiden. Mal3p bevorzugt die Bindung zwischen zwei Proto-filamenten, lässt jedoch das übrigen Gitter unbesetzt. In seltenen Fällen wurde Mal3p in zwei nebeneinander angrenzenden Protofilamenten gefunden. An diesen Stellen zeigt sich überraschenderweise eine A-Gitter-Konformation am Mikrotubulus, was auf eine spezifische Naht-Bindung hinweist. Mit Hilfe einer Gitterverstärkung in Form einer Kinesin-Motor-Domäne, die an jede b-Untereinheit bindet, konnte gezeigt werden, dass Mal3p die Naht, den schwächsten Teil eines Mikrotubulus, stabilisiert. Des Weiteren unterstützt die Anwesenheit von Mal3p während der Mikrotubulus Polymerisation die Formierung zur Bildung des Hohlzylinders. Die Untersuchung der monomeren Mikrotubuli-Bindungs-Domäne von Mal3p unter Anwendung von Kryo-EM und anschließender 3-D helikalen Rekonstruktion, führte zur genauen Lokalisierung des Proteins auf dem Mikrotubulus Gerüst. Hierbei bestätigte sich auch die Lokalisation zwischen den Protofilamenten. Des Weiteren konnte gezeigt werden, dass Mal3p die Fähigkeit besitzt, die Konformation des Mikrotubulus Gitters zu beeinflussen. Zusammenfassend lässt sich sagen, dass das EB1-Homolog nicht nur an das Mikrotubulus Plus Ende, sondern auch an der Naht entlang des ganzen Mikrotubulus bindet. Die Art wie Mal3p mit den Mikrotubuli interagiert, zeigt einen neuen Mecha-nismus der Mikrotubuli Stabilisierung und eröffnet weitere Sichtweisen, wie Plus End Bindungsproteine die Dynamik von Mikrotubuli beeinflussen. Die Ergebnisse belegen, dass Mikrotubuli zwei definierte Reaktionsplattformen auf ihrer Oberfläche besitzen, die unabhängig mit verschiedenen MAPs und Motorproteinen interagieren KW - Mikrotubulus KW - Elektronenmikroskopie KW - Mikrotubule KW - Tubulin KW - Mal3p KW - EB1 KW - Microtubules KW - Electron Microscopy KW - Seam KW - Lattice KW - EB1 Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24714 ER -