TY - THES A1 - Rumpel, Matthias T1 - Development of Components for Solid-State Batteries and their Characterization T1 - Entwicklung von Komponenten für Festkörperbatterien und deren Charakterisierung N2 - This Ph.D. thesis has addressed several main issues in current ASSB research within four studies. Ceramic ASSBs are meant to enable the implementation of Li-metal anodes and high voltage cathode materials, which would increase energy density, power density, life time as well as safety aspects in comparison with commercially available liquid electrolyte LiBs. In this thesis, several scientific questions arising on the cathode side of ASSBs have been focused on. With respect to the target system of a ternary composite bulk cathode consisting of ceramic active material, ceramic SSE and an electrically conductive component, studies about the thermal stabilities of these components and their impact on the electrochemical performance have been conducted. Particulate bulk cathode composites have to fulfil electrochemical, chemical, mechanical and structural requirements in order to compete with commercial LiBs. Particularly, the production process requires high-temperature sintering to obtain firmly bonded contacts in order to maximize the electrochemically active area, charge transfer and ionic conduction. However, interdiffusion, intermixing and decomposition of the initial components during sintering result in low-performing ASSBs so far. These side reactions during high-temperature treatment have been investigated in order to gain a better understanding of these mechanisms and to enable a better controlling of the manufacturing process as well as to simplify the choice of material combinations. The first two parts of this thesis deal with the thermal stability of the ceramic SSE LATP in combination with various active materials and with the validation of a probable improvement of the sintering process due to liquid phase sintering of LATP by adding Li3PO4. In the third and fourth parts, the impact of interdiffusion, intermixing and decomposition on the electrochemical performance of TF-SSBs based on the active material LMO and the ceramic SSE Ga-LLZO has been investigated. N2 - Diese Dissertation befasst sich in vier Studien mit mehreren Hauptthemen der aktuellen Festkörperbatterieforschung (engl.: all solid-state battery, ASSB). Keramische Festkörperbatterien sollen den Einsatz von Li-Metallanoden und Hochvoltkathodenmaterialien ermöglichen, was die Energiedichte, Leistungsdichte, Lebensdauer sowie Sicherheitsaspekte im Vergleich zu kommerziell erhältlichen Lithiumionenbatterien mit flüssigen Elektrolyten erhöhen würde. In dieser Arbeit wurden mehrere wissenschaftliche Fragestellungen untersucht, die sich auf der Kathodenseite von ASSBs ergeben. Im Hinblick auf das Zielsystem einer ternären Kompositkathode, bestehend aus keramischem Aktivmaterial, keramischem Festkörperelektrolyt und einer elektrisch leitfähigen Komponente, wurden Untersuchungen über die thermischen Stabilitäten dieser Komponenten und deren Einfluss auf die elektrochemische Leistung durchgeführt. Partikuläre Kathodenkomposite müssen elektrochemische, chemische, mechanische und strukturelle Anforderungen erfüllen, um mit kommerziellen Lithiumionenbatterien konkurrieren zu können. Insbesondere erfordert der Produktionsprozess ein Hochtemperatursintern, um eine stoffschlüssige Anbindung zu erhalten, damit die elektrochemisch aktive Fläche, der Ladungstransfer und die Ionenleitung maximiert werden können. Allerdings führen Interdiffusion, Vermischung und Zersetzung der Ausgangskomponenten während des Sinterns bisher zu ASSBs mit geringer Leistung. Diese Nebenreaktionen während der Hochtemperaturbehandlung wurden untersucht, um ein besseres Verständnis dieser Mechanismen zu erlangen und eine bessere Steuerung des Herstellungsprozesses sowie eine einfachere Auswahl von Materialkombinationen zu ermöglichen. Die ersten beiden Teile dieser Arbeit befassen sich mit der thermischen Stabilität des Festkörperelektrolyten LATP in Kombination mit verschiedenen Aktivmaterialien und mit der Validierung einer möglichen Verbesserung des Sinterprozesses durch Flüssigphasensinterung von LATP durch Zugabe von Li3PO4. Im dritten und vierten Teil wurde der Einfluss von Interdiffusion, Durchmischung und Zersetzung auf die elektrochemische Leistung von Dünnschicht-Festkörperbatterien basierend auf dem Aktivmaterial LMO und dem keramischen Festkörperelektrolyten Ga-LLZO untersucht. KW - Elektrochemie KW - all solid-state battery KW - solid-state electrolyte KW - lithium-ion battery KW - electrochemistry KW - Festkörperakkumulator KW - Lithium-Ionen-Akkumulator KW - Festelektrolyt KW - Festkörperbatterie KW - Lithium-Ionen Batterie KW - Festkörperelektrolyt Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-347154 ER - TY - THES A1 - Okorn, Alexander T1 - Synthese und Reaktivität von PAH-substituierten Diborenen und Dihydroanthracendiyl-verbrückten Diborverbindungen T1 - Synthesis and Reactivity of PAH-substituted Diborenes and Dihydroanthracendiyl-bridged Diboroncompounds N2 - Die vorliegende Arbeit beschäftig sich mit der Synthese und Reaktivität von Phosphan-stabilisierten Diborenen, die auf Grund ihres Substitutionsmusters über ein erhöhtes Reaktivitätsvermögen verfügen. Der erste Teil dieser Arbeit beschreibt die Synthese von polycyclischen aromatischen Kohlenwasserstoff (PAH)-substituierten, Trimethylphosphan-stabilisierten Diborenen. Im zweiten Abschnitt dieser Arbeit wird die Synthese von Diborenen beschrieben, welche in einer Dihydroanthracendiyl-verbrückten Ringstruktur eingebunden sind. N2 - The work deals with the synthesis and reactivity of phosphine-stabilised diborenes with increased reactivity due to their substitution pattern. The first part describes the synthesis of polycyclic aromatic hydrocarbon (PAH)-substituted, trimethylphosphine-stabilised diborenes.The second part of this work describes the synthesis of strained diborenes, which are incorporated into a dihydroanthracenediyl-bridged ring structure. KW - Diborene Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-348368 ER - TY - THES A1 - Maier, Matthias T1 - Inorganic and Inorganic-Organic Hybrid Polymers Containing BN Units in the Main Chain T1 - Anorganische und anorganisch-organische hybrid Polymere mit BN Einheiten in der Hauptkette N2 - π-Conjugated organic polymers have attracted tremendous attention in the last decades, and the interest in these materials is mainly driven by their applicability in next-generation electronic and optoelectronic devices (OLEDs, OFETs, photovoltaics). The partial or complete replacement of carbon atoms by main group elements in conjugated polymers can significantly change the characteristics and applications of these macromolecules. In this work, a class of inorganic polymers comprising a backbone of exclusively boron and nitrogen atoms (poly(iminoborane)s, PIBs) and their monodisperse oligomers is described. In addition, novel inorganic–organic hybrid polymers containing BN units in their polymer backbone were synthesized and characterized. In chapter 2.1, the development of catalytic B–N coupling routes for the controlled synthesis of macromolecular materials is described. While the reaction of an N-silyl-B-chloro-aminoborane with the electrophilic reagent trimethylsilyl triflate led to effective B–N coupling, the reaction with a silver(I) salt resulted in an intramolecular Cl/Me exchange between the boron and silicon centers. In chapter 2.2-2.4, the study of oligo- and poly(iminoborane)s is discussed. Monodisperse and cyclolinear oligo(iminoborane)s based on diazaborolidines with up to 7 boron and 8 nitrogen atoms were synthesized by successively extending the B-N main chain. However, the use of benzodiazaborolines only led to limited BN catenation. Furthermore, the redistribution processes resulting from the reaction of longer oligomers with non-stoichiometric amounts of (di)halogenated boranes is reported. In chapter 2.5-2.6, the synthesis of 1,2,5-azadiborolanes as building blocks for the synthesis of poly(iminoborane)s and inorganic-organic hybrid polymers is described. While the attempt to apply an azadiborolane with sterically demanding groups on the boron-bridging ethylene unit for the construction of PIB was unfeasible, it was successfully incorporated in inorganic-organic hybrid polymers. Photophysical studies indicated π-conjugation along the polymer chain. A first attempt to synthesize PIBs based on azadiborolanes with unsubstituted ethylene units showed promising results. In chapter 2.7-2.8, a comprehensive study of poly(arylene iminoborane)s, which are BN analogs of poly(arylene vinylene)s is described, and the properties of four polymers as well as twelve monodisperse oligomers were investigated. Photophysical investigations of the monomers, dimers and polymers showed a systematic bathochromic shift of the absorption maximum with increasing chain length and thiophene content. Based on TD-DFT calculations of the model oligomers, the lowest-energy absorption band could be assigned to HOMO to LUMO transitions with π-π* character. The oligo- and poly(arylene iminoborane)s showed only very weak to no emission in solution but they were emissive in the solid state. For four oligomers the aggregation induced emission (AIE) in a THF/water mixture was investigated and DLS studies confirmed the formation of nanoaggregates. In chapter 2.9, oligo- and polymerizations of sulfur-containing building blocks and subsequent pH-triggered degradation of the products is described. While a sulfilimine-containing oligomer could not be isolated, the sulfone-, sulfoximine-, and sulfoxide-containing molecular oligomers and polymers could be successfully synthesized by B=N or B–O bond formation reactions. The sulfur-containing building blocks were successfully released under acidic or basic conditions, which was confirmed by NMR spectroscopy and mass spectrometry. N2 - π-Konjugierte organische Polymere haben in den letzten Jahrzehnten immer größere Aufmerksamkeit erhalten. Das Interesse an diesen Materialien wird hauptsächlich durch ihre Anwendbarkeit in elektronischen und optoelektronischen Geräten der nächsten Generation (OLEDs, OFETs, Photovoltaik) angetrieben. Der teilweise oder vollständige Ersatz von Kohlenstoffatomen durch andere Hauptgruppenelemente in konjugierten Polymeren kann die Eigenschaften und Anwendungen dieser Makromoleküle erheblich verändern. In dieser Arbeit wird eine Klasse anorganischer Polymere mit einer Hauptkette aus ausschließlich Bor- und Stickstoffatomen (Poly(iminoboran)en, PIBs) und deren monodisperse Oligomere beschrieben. Darüber hinaus wurden neuartige anorganisch-organische Hybridpolymere, die BN-Einheiten in ihrem Polymerrückgrat enthalten, synthetisiert und charakterisiert. In Kapitel 2.1 wird die Entwicklung von katalytischen B-N-Kupplungsmethoden für die kontrollierte Synthese von makromolekularen Materialien beschrieben. Während die Reaktion eines N-Silyl-B-Chlor-Aminoborans mit dem elektrophilen Reagenz Trimethylsilyltriflat zu einer effektiven B-N-Kupplung führte, führte die Reaktion mit einem Silber(I)-Salz zu einem intramolekularen Cl/Me-Austausch zwischen den Bor- und Siliziumzentren. In den Kapiteln 2.2-2.4 wird die Untersuchung von Oligo- und Poly(iminoboran)en behandelt. Durch die sukzessive Verlängerung der BN-Hauptkette wurden monodisperse und zyklolineare Oligo(iminoboran)e, basierend auf Diazaborolidinen, mit bis zu 7 Bor- und 8 Stickstoffatomen synthetisiert. Die Verwendung von Benzodiazaborolinen führte allerdings nur zu einer begrenzten BN-Bindungsknüpfung. Darüber hinaus wurde über Umverteilungsprozesse berichtet, die bei der Umsetzung von längeren Oligomeren mit nicht stöchiometrischen Mengen von (di)halogenierten Boranen resultieren. In den Kapiteln 2.5-2.6 wird die Synthese von 1,2,5-Azadiborolanen als Bausteine für die Synthese von Poly(iminoboran)en und anorganisch-organischen Hybridpolymeren beschrieben. Während der Versuch, ein Azadiborolan mit sterisch anspruchsvollen Gruppen an der borverbrückenden Ethyleneinheit für den Aufbau von PIBs einzusetzen nicht zum Erfolg führte, wurde diese Einheit jedoch erfolgreich in anorganisch-organische Hybridpolymere eingebaut. Photophysikalische Untersuchungen deuteten auf eine π-Konjugation entlang der Polymerkette hin. Ein erster Versuch, PIBs auf der Basis von Azadiborolanen mit unsubstituierten Ethyleneinheiten zu synthetisieren, zeigte vielversprechende Ergebnisse. In den Kapiteln 2.7-2.8 wird die umfassende Studie von Poly(aryleniminoboran)en, die die BN-Analoga von Poly(arylenvinylen)en darstellen, beschrieben und die Eigenschaften von vier Polymeren und zwölf monodispersen Oligomeren untersucht. Photophysikalische Untersuchungen der Monomere, Dimere und Polymere zeigten eine systematische bathochrome Verschiebung des Absorptionsmaximums mit zunehmender Kettenlänge und Thiophengehalt. Auf der Grundlage von TD-DFT-Berechnungen der Modelloligomere konnte die niederenergetischste Absorptionsbande, HOMO-LUMO-Anregungen mit π-π* Charakter zugeordnet werden. Die Oligo- und Poly(aryleniminoboran)e zeigten nur sehr schwache oder keine Emission in Lösung, emittieren aber im festen Zustand. Für vier Oligomere wurde die aggregationsinduzierte Emission (AIE) in einem THF/Wasser-Gemisch untersucht und DLS-Studien bestätigten die Bildung von Nanoaggregaten. In Kapitel 2.9 werden Oligo- und Polymerisationen von schwefelhaltigen Bausteinen und die anschließende pH-gesteuerte Degradierung beschrieben. Während ein Sulfilimin-haltiges Oligomer nicht isoliert werden konnte, konnten die Sulfon-, Sulfoximin- und Sulfoxid-haltigen molekularen Oligomere und Polymere erfolgreich durch B=N oder B O Bindungsbildung synthetisiert werden. Die schwefelhaltigen Bausteine konnten unter sauren oder basischen Bedingungen erfolgreich freigesetzt werden, was durch NMR-Spektroskopie und Massenspektrometrie bestätigt wurde. KW - Anorganische Polymere KW - Konjugierte Polymere KW - Polyarylenvinylene KW - Polyiminoboranes KW - Silicon-Boron Exchange KW - Silizium-Bor Austausch KW - Bor-Stickstoff Bindung KW - boron-nitrogen bond Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-351536 ER - TY - THES A1 - Weber, Manuel T1 - Synthese, Charakterisierung und Eigenschaften neuartiger carboranyl-substituierter NHC-Liganden und Anwendung in der Metallkomplex-Chemie T1 - Synthesis, characterisation and properties of novel carboranyl-substituted NHC ligands and application in metal complex chemistry N2 - Im Fokus der Dissertation stand die Synthese von Vorstufen (Imidazoliumsalze) für NHC-Liganden sowie die Umsetzung dieser Verbindungen zu N-heterocyclischen Carbenen unter Verwendung des Carba-closo-dodecaborat-Anions. Hierbei wurde der Cluster über die Position B12 oder B7 an das Stickstoffatome des Imidazols gebunden. Zur Synthese wurden unterschiedliche Routen ausgehend von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(12-PhI-closo-1-CB_{11}H_{11}\) sowie den entsprechenden 7-Isomeren untersucht und miteinander verglichen. Die isomerenreinen Synthesen wurden hinsichtlich ihrer Vor- und Nachteile untersucht und so optimiert. Es wurden sowohl unsymmetrische Imidazoliumsalze mit dem Carba-closo-dodecaborat-Anion auf der einen Seite und Alkyl- oder Arylreste (Butyl, Methyl, Phenyl, p-Methoxyphenyl, p-Fluorphenyl-, Vinyl-, Benzyl- und Mesitylsubstituenten) als auch die symmetrische Variante mit zwei Carboranylcluster synthetisiert. Besonders hervorzuheben ist hierbei, dass die Synthese des Bis(1,3-Carboran-12-yl)imidazolatanions in einer Buchwald-Hartwig-Kreuzkupplungsreaktion durch Umsetzung der Reagenzien \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}]\) durch 1 zu 1 Umsetzung miteinander reagiert haben. In den meisten bisher literaturbekannten und im Rahmen der Doktorarbeit untersuchten Buchwald-Hartwig-Kreuzkupplungsreaktionen sind 4-14 Äquivalente des Amins notwendig. Darüberhinaus erfordert das Amin häufig eine Aktivierung durch Umsetzung zu Lithiumorganylen. Dies war bei der Umsetzung von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) mit \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}] \) nicht notwendig und zeigt den starken elektronenschiebenden Effekt des Clusters auf. Die unsymmetrischen Imidazoliumsalze konnten durch Umsetzung mit n-Butyllithium zu C2-NHC-Derivate umgesetzt werden. Bei der Umsetzung des Bis(1,3-Carboran-12-yl)imidazolatanions bildete sich zunächst ein Gemisch aus dem C2- und C5-Isomer, des Weiteren ist anteilig auch die Deprotonierung am Clusterkohlenstoffatom aufgetreten. N2 - The dissertation focused on the synthesis of precursors (imidazolium salts) for NHC ligands and the conversion of these compounds to N-heterocyclic carbenes using the carba-closo-dodecaborate anion. Here, the cluster was attached to the nitrogen atom of the imidazole via the B12 or B7 position. For synthesis, different routes starting from \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(12-PhI-closo-1-CB_{11}H_{11}\) as well as the corresponding 7-isomers were investigated and compared. The isomerically pure syntheses were investigated with respect to their advantages and disadvantages and thus optimised. Both asymmetric imidazolium salts with the carba-closo-dodecaborate anion on one side and alkyl or aryl residues (butyl, methyl, phenyl, p-methoxyphenyl, p-fluorophenyl, vinyl, benzyl and mesityl substituents) and the symmetric variant with two carboranyl clusters were synthesised. Of particular note here is that the synthesis of the bis(1,3-carboran-12-yl)imidazolate anion was achieved in a Buchwald-Hartwig cross-coupling reaction by reacting the reagents \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11}]\) by 1 to 1 reaction. In most of the Buchwald-Hartwig cross-coupling reactions known so far in the literature and investigated in the doctoral thesis, 4-14 equivalents of the amine are required. Furthermore, the amine often requires activation by conversion to lithium organyls. This was not necessary in the reaction of \(Cs[12-I-closo-1-CB_{11}H_{11}]\) with \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11})\), demonstrating the strong electron-pushing effect of the cluster. The unsymmetrical imidazolium salts could be converted to C2-NHC derivatives by reaction with n-butyllithium. During the reaction of the bis(1,3-carboran-12-yl)imidazolate anion, a mixture of the C2 and C5 isomer was initially formed, and furthermore, deprotonation also occurred proportionally at the cluster carbon atom. KW - NHC KW - N-Heterocyclische Carbene KW - Carboranylsubstituierte NHC KW - NHC-Gold(I)-Komplexe KW - NHC-Selenkomplexe KW - Imidazolatsalze KW - Imidazoliumsalze Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258143 ER - TY - THES A1 - Häfner, Alena T1 - Reaktivität eines \(ortho\)-phenylenverbrückten Diborans und Darstellung von gespannten C\(_2\)B\(_2\)-Ringsystemen T1 - Reactivity of an \(ortho\)-phenylenbridged diborane and synthesis of strained C\(_2\)B\(_2\) ring systems N2 - Die Dissertation befasst sich mit der Reaktivität von 1,2-Bis(dichlorboryl)benzol. Im ersten Kapitel wird auf die Problematik bei dessen Synthese eingegangen. Der zweite Teil der Arbeit befasst sich mit der Bildung von entsprechenden Boran-Addukten mit verschiedenen Lewis-Basen. Das dritte Kapitel beschreibt die Synthese eines neuartigen, vollständig ungesättigten 1,2-Diboretdiradikals, welches durch die schrittweise Reduktion des 1,2-[(CAAC)BCl2]2-Benzols erhalten wurde. Darüber hinaus konnte bei dieser schrittweisen Reduktion ebenfalls das einfache Borylradikal, das nicht-cyclische Diradikal und das dianionische gespannte C2B2-Ringsystem erhalten werden. Anfängliche Reaktivitätsstudien zum 1,2-Diboretdiradikal zeigen zudem, dass die B-B-Bindung durch Umsetzung mit Kohlenstoffmonoxid gespalten und so ein Bisborylen dargestellt werden kann. Im vierten Kapitel konnte das 1,2-Bis(dichlorboryl)benzol durch Transmetallierungsreaktionen zu verschiedenen, sich in ihren Eigenschaften stark unterscheidenden, Verbindungen umgesetzt werden. So konnte das fluoreszierende ortho-phenylenverbrückte Bis-9-Borafluoren erhalten werden, aus welchem durch Wärmezufuhr das ebenfalls fluoreszierendes diboraanthracenartige Umlagerungsprodukt gewonnen werden konnte. Beide Verbindungen wurden auf ihre photophysikalischen und elektrochemischen Eigenschaften untersucht. Weiterhin konnten polycyclische Boracyclen mit C10B2-Gerüst erhalten werden, bei welchen instantan die selektive Bildung von zwei chiralen Zentren über eine Vielzahl an B-C-Bindungsbrüchen und -knüpfungen beobachtet wurde. Zuletzt konnte ein thermisch empfindliches, potentiell explosives Azid-verbrücktes Azidoboran dargestellt werden, bei welchem eine Staudinger-artige Reaktivität beobachtet werden konnte. N2 - The dissertation deals with the reactivity of 1,2-bis(dichloroboryl)benzene. The first chapter deals with the problems involved in its synthesis. The second part of the thesis deals with the formation of corresponding borane adducts with various Lewis bases. The third chapter describes the synthesis of a novel, fully unsaturated 1,2-diboretdiradical, which was obtained by the stepwise reduction of 1,2-[(CAAC)BCl2]2-benzene. In addition, the simple boryl radical, the non-cyclic diradical and the dianionic strained C2B2 ring system were also obtained in this stepwise reduction. Initial reactivity studies on the 1,2-diboretdiradical also show that the B-B bond can be cleaved by reaction with carbon monoxide to give a bisborylene. In the fourth chapter, 1,2-bis(dichloroboryl)benzene was reacted by transmetallation reactions to from various compounds with very different properties. Thus, the fluorescent ortho-phenylene-bridged bis-9-borafluorene was obtained, from which the likewise fluorescent diboraanthracene-like rearrangement product could be obtained by applying heat. Both compounds were investigated for their photophysical and electrochemical properties. Furthermore, polycyclic boracycles with a C10B2 scaffold were obtained, in which the selective formation of two chiral centers via a multitude of B-C bond breaks and linkages was observed instantaneously. Finally, a thermally sensitive, potentially explosive azide-bridged azidoborane was obtained for which Staudinger-like reactivity was observed. KW - Biradikal KW - Borylierung KW - Diboret KW - Borylradikale KW - CnB2-Heterocyclen KW - Biradikale Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-348020 ER - TY - JOUR A1 - Philipp, Michael S. M. A1 - Bertermann, Rüdiger A1 - Radius, Udo T1 - Activation of Ge−H and Sn−H Bonds with N‐Heterocyclic Carbenes and a Cyclic (Alkyl)(amino)carbene JF - Chemistry – A European Journal N2 - A study of the reactivity of several N‐heterocyclic carbenes (NHCs) and the cyclic (alkyl)(amino)carbene 1‐(2,6‐di‐iso‐propylphenyl)‐3,3,5,5‐tetramethyl‐pyrrolidin‐2‐ylidene (cAAC\(^{Me}\)) with the group 14 hydrides GeH2Mes2 and SnH2Me2 (Me=CH\(_{3}\), Mes=1,3,5‐(CH\(_{3}\))\(_{3}\)C\(_{6}\)H\(_{2}\)) is presented. The reaction of GeH\(_{2}\)Mes\(_{2}\) with cAAC\(^{Me}\) led to the insertion of cAAC\(^{Me}\) into one Ge−H bond to give cAAC\(^{Me}\)H−GeHMes\(_{2}\) (1). If 1,3,4,5‐tetramethyl‐imidazolin‐2‐ylidene (Me\(_{2}\)Im\(^{Me}\)) was used as the carbene, NHC‐mediated dehydrogenative coupling occurred, which led to the NHC‐stabilized germylene Me\(_{2}\)Im\(^{Me}\)⋅GeMes\(_{2}\) (2). The reaction of SnH\(_{2}\)Me\(_{2}\) with cAAC\(^{Me}\) also afforded the insertion product cAAC\(^{Me}\)H−SnHMe\(_{2}\) (3), and reaction of two equivalents Me\(_{2}\)Im\(^{Me}\) with SnH\(_{2}\)Me\(_{2}\) gave the NHC‐stabilized stannylene Me\(_{2}\)Im\(^{Me}\)⋅SnMe\(_{2}\) (4). If the sterically more demanding NHCs Me\(_{2}\)Im\(^{Me}\), 1,3‐di‐isopropyl‐4,5‐dimethyl‐imidazolin‐2‐ylidene (iPr\(_{2}\)Im\(^{Me}\)) and 1,3‐bis‐(2,6‐di‐isopropylphenyl)‐imidazolin‐2‐ylidene (Dipp\(_{2}\)Im) were employed, selective formation of cyclic oligomers (SnMe\(_{2}\))\(_{n}\) (5; n=5–8) in high yield was observed. These cyclic oligomers were also obtained from the controlled decomposition of cAAC\(^{Me}\)H−SnHMe\(_{2}\) (3). KW - cyclic alkyl(amino)carbenes KW - germanium KW - hydrides KW - N-heterocyclic carbenes KW - tin Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-311929 VL - 29 IS - 3 ER - TY - JOUR A1 - Cataldi, Eleonora A1 - Raschig, Martina A1 - Gutmann, Marcus A1 - Geppert, Patrick T. A1 - Ruopp, Matthias A1 - Schock, Marvin A1 - Gerwe, Hubert A1 - Bertermann, Rüdiger A1 - Meinel, Lorenz A1 - Finze, Maik A1 - Nowak‐Król, Agnieszka A1 - Decker, Michael A1 - Lühmann, Tessa T1 - Amber Light Control of Peptide Secondary Structure by a Perfluoroaromatic Azobenzene Photoswitch JF - ChemBioChem N2 - The incorporation of photoswitches into the molecular structure of peptides and proteins enables their dynamic photocontrol in complex biological systems. Here, a perfluorinated azobenzene derivative triggered by amber light was site‐specifically conjugated to cysteines in a helical peptide by perfluoroarylation chemistry. In response to the photoisomerization (trans→cis) of the conjugated azobenzene with amber light, the secondary structure of the peptide was modulated from a disorganized into an amphiphilic helical structure. KW - amber light KW - decafluoroazobezene KW - peptide stapling KW - photocontrol KW - perfluoroarylation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312480 VL - 24 IS - 5 ER - TY - JOUR A1 - Weiser, Jonas A1 - Cui, Jingjing A1 - Dewhurst, Rian D. A1 - Braunschweig, Holger A1 - Engels, Bernd A1 - Fantuzzi, Felipe T1 - Structure and bonding of proximity‐enforced main‐group dimers stabilized by a rigid naphthyridine diimine ligand JF - Journal of Computational Chemistry N2 - The development of ligands capable of effectively stabilizing highly reactive main‐group species has led to the experimental realization of a variety of systems with fascinating properties. In this work, we computationally investigate the electronic, structural, energetic, and bonding features of proximity‐enforced group 13–15 homodimers stabilized by a rigid expanded pincer ligand based on the 1,8‐naphthyridine (napy) core. We show that the redox‐active naphthyridine diimine (NDI) ligand enables a wide variety of structural motifs and element‐element interaction modes, the latter ranging from isolated, element‐centered lone pairs (e.g., E = Si, Ge) to cases where through‐space π bonds (E = Pb), element‐element multiple bonds (E = P, As) and biradical ground states (E = N) are observed. Our results hint at the feasibility of NDI‐E2 species as viable synthetic targets, highlighting the versatility and potential applications of napy‐based ligands in main‐group chemistry. KW - bond theory KW - computational chemistry KW - density functional calculations KW - main group elements KW - N ligands Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312586 VL - 44 IS - 3 SP - 456 EP - 467 ER - TY - JOUR A1 - Lindl, Felix A1 - Lamprecht, Anna A1 - Arrowsmith, Merle A1 - Khitro, Eugen A1 - Rempel, Anna A1 - Dietz, Maximilian A1 - Wellnitz, Tim A1 - Bélanger‐Chabot, Guillaume A1 - Stoy, Andreas A1 - Paprocki, Valerie A1 - Prieschl, Dominik A1 - Lenczyk, Carsten A1 - Ramler, Jacqueline A1 - Lichtenberg, Crispin A1 - Braunschweig, Holger T1 - Aromatic 1,2‐Azaborinin‐1‐yls as Electron‐Withdrawing Anionic Nitrogen Ligands for Main Group Elements JF - Chemistry – A European Journal N2 - The 2‐aryl‐3,4,5,6‐tetraphenyl‐1,2‐azaborinines 1‐EMe\(_{3}\) and 2‐EMe\(_{3}\) (E=Si, Sn; aryl=Ph (1), Mes (=2,4,6‐trimethylphenyl, 2)) were synthesized by ring‐expansion of borole precursors with N\(_{3}\)EMe\(_{3}\)‐derived nitrenes. Desilylative hydrolysis of 1‐ and 2‐SiMe\(_{3}\) yielded the corresponding N‐protonated azaborinines, which were deprotonated with nBuLi or MN(SiMe\(_{3}\))\(_{2}\) (M=Na, K) to the corresponding group 1 salts, 1‐M and 2‐M. While the lithium salts crystallized as monomeric Lewis base adducts, the potassium salts formed coordination polymers or oligomers via intramolecular K⋅⋅⋅aryl π interactions. The reaction of 1‐M or 2‐M with CO\(_{2}\) yielded N‐carboxylate salts, which were derivatized by salt metathesis to methyl and silyl esters. Salt metathesis of 1‐M or 2‐M with methyl triflate, [Cp*BeCl] (Cp*=C\(_{5}\)Me\(_{5}\)), BBr\(_{2}\)Ar (Ar=Ph, Mes, 2‐thienyl), ECl\(_{3}\) (E=B, Al, Ga) and PX\(_{3}\) (X=Cl, Br) afforded the respective group 2, 13 and 15 1,2‐azaborinin‐2‐yl complexes. Salt metathesis of 1‐K with BBr\(_{3}\) resulted not only in N‐borylation but also Ph‐Br exchange between the endocyclic and exocyclic boron atoms. Solution \(^{11}\)B NMR data suggest that the 1,2‐azaborinin‐2‐yl ligand is similarly electron‐withdrawing to a bromide. In the solid state the endocyclic bond length alternation and the twisting of the C\(_{4}\)BN ring increase with the sterics of the substituents at the boron and nitrogen atoms, respectively. Regression analyses revealed that the downfield shift of the endocyclic \(^{11}\)B NMR resonances is linearly correlated to both the degree of twisting of the C\(_{4}\)BN ring and the tilt angle of the N‐substituent. Calculations indicate that the 1,2‐azaborinin‐1‐yl ligand has no sizeable π‐donor ability and that the aromaticity of the ring can be subtly tuned by the electronics of the N‐substituent. KW - 1,2-azaborinine KW - aromaticity KW - crystallographic analyses KW - N-functionalization KW - salt metathesis Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312222 VL - 29 IS - 11 ER - TY - THES A1 - Ferger, Matthias T1 - Development of New Methods for Triarylborane Synthesis and Investigation of Triarylborane Chromophores for DNA and RNA Sensing and Singlet Oxygen Sensitization T1 - Entwicklung Neuer Methoden zur Triarylboran Synthese und Untersuchung von Triarylboran Farbstoffen als DNA und RNA Sensoren und Singulett-Sauerstoff Sensibilisatoren N2 - The 1st chapter provides a detailed review of the development of synthetic approaches to triarylboranes from their first report nearly 135 years ago to the present. In the 2nd chapter, a novel and convenient methodology is reported for the one-pot synthesis of sterically-congested triarylboranes, using bench-stable aryltrifluoroborates as the boron source. The new procedure gives access to symmetrically- and unsymmetrically-substituted triarylboranes. The borylated triarylboranes are suggested as building blocks for the design of functional materials. In the 3rd chapter, four luminescent tetracationic bis-triarylborane DNA and RNA sensors that show high binding affinities, in several cases even in the nM range, are investigated. The molecular structures of two of the neutral precursors reveal some structural flexibility for these compounds in the solid state. The compounds were found to be highly emissive even in water and DNA and RNA binding affinities were found to be dependent on linker length and flexibility. Strong SERS responses for three of the four compounds demonstrate the importance of triple bonds for strong Raman activity in molecules of this compound class. In chapter 4, the compound class of water-soluble tetracationic bis-triarylborane chromophores is extended by EDOT-linked compounds and those are compared to their thiophene-containing analogs. Absorption and emission are significantly red-shifted in these compounds, compared to their thiophene-containing analogs and, due to a large Stokes shift, one of the reported compounds exhibits the most bathochromically shifted emission, observable well into the near infrared region, of all tetracationic water-soluble bis-triarylborane chromophores reported to date. Long-lived excited states, completely quenched by oxygen, were observed for the water-stable compounds of this study via transient absorption spectroscopy and a quantum yield for singlet oxygen formation of 0.6 was determined for one of them. N2 - Das erste Kapitel gibt einen detaillierten Überblick über die Entwicklung verschiedener Synthesemöglichkeiten von Triarylboranen seit ihrer erstmaligen Erwähnung vor rund 135 Jahren bis heute. In Kapitel 2 wurde eine neuartige und praktische Methode für die Eintopfsynthese von sterisch stabilisierten Triarylboranen unter Verwendung von luftstabilen Aryltrifluorboraten als Borquelle beschrieben. Das neue Verfahren ermöglicht den Zugang zu symmetrisch und unsymmetrisch substituierten Triarylboranen, die bei der Konstruktion borhaltiger Funktionsmaterialien verwendet werden könnten. Im dritten Kapitel wurden tetrakationische Bis-Triarylborane bezüglich DNA- und RNA-Sensorik untersucht, wobei hohe Bindungsaffinitäten, wurden. Die Molekülstrukturen von zwei neutralen Vorstufenverbindungen deuten auf eine gewisse Flexibilität für diese Verbindungen im Festkörper hin. Die Verbindungen erwiesen sich selbst in Wasser als stark emittierend und die DNA und RNA Bindungsaffinitäten waren abhängig von Länge und Flexibilität des Linkers. Starke SERS-Signale für drei der vier Verbindungen, zeigen die Bedeutung von Dreifachbindungen für eine starke Raman-Aktivität in Molekülen dieser Verbindungsklasse. In Kapitel 4 dieser Arbeit wurde die Verbindungsklasse wasserlöslicher tetrakationischer Bis Triarylboran-Chromophore um EDOT-verbrückte Verbindungen erweitert und diese mit ihren literaturbekannten Thiophenanaloga verglichen. Absorption und Emission sind in diesen Verbindungen im Vergleich zu ihren Thiophen-haltigen Analoga rotverschoben und eine der Verbindungen zeigt die am weitesten rotverschobene, noch weit im nahen Infrarotbereich detektierbare, Emission aller bisher bekannten Verbindungen dieser Art. Für die wasserstabilen Verbindungen wurden mittels transienter Absorptionsspektroskopie langlebige Zustände beobachtet, die vollständig durch Sauerstoff gequencht werden und eine Quantenausbeute für die Singulett-Sauerstoffbildung von 0.6 wurde für eine der Verbindungen bestimmt. KW - Triarylborane KW - Fotophysik KW - Chemische Synthese KW - Singulettsauerstoff KW - DNA-Sensor KW - Photophysics KW - Chemical Synthesis KW - Singlett Oxygen KW - Boron Materials KW - Biomacromolecular Sensing Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234307 ER -