TY - THES A1 - Sigritz, Rainer T1 - Synthese, Struktur und Reaktivität von ansa-Ferrocenen T1 - Synthesis, Structure and Reactivity of ansa-Ferrocenes N2 - In der vorliegenden Arbeit wird die Synthese von [2]Ferrocenophanen auf verschiedenen Wegen gezeigt. Neben der vollständigen Charakterisierung der Verbindungen wird auch deren Reaktivität untersucht. So wird gezeigt, dass mit den Elementen der Gruppe 16, sowie mit späten Übergangsmetallkomplexen eine Insertion in die Element-Element Bindung der Brücke statt finden kann. Darüber hinaus wird ausgehend von einem [2]Diboraferrocenophan eine katalytische Syntheseroute zur Diborierung von Alkinen entwickelt, sowohl unter homogenen als auch unter heterogen Bedingungen. Ausgehend von einem [2]Ferrocenophan wird eine neue Syntheseroute zur Darstellung von Ferrocenylboronsäureestern gezeigt. N2 - Within this thesis, the synthesis of [2]ferrocenophanes is presented in different ways. Besides, the compounds are not only fully characterized, but also their reactivity is examined. It is shown, that on the addition of group 16 elements or late transition metal complexes, an insertion into the element-element bond can take place. Furthermore, starting from a [2]diboraferrocenophane, a synthetic protocol for the homogeneous and the heterogeneous catalyzed diboration of alkynes was developed. Starting from a [2]ferrocenophane, a new pathway for the synthesis of ferrocenyl boronic acids is presented. KW - Ferrocenderivate KW - Cyclophane KW - Ferrocen KW - Metallocene KW - Ringspannung KW - ferrocenophanes KW - diboration KW - oxidative addition Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-50003 ER - TY - THES A1 - Schon, Christof T1 - Spektroskopie an substituierten [2.2]Paracyclophanen T1 - Spectroscopy of substituted [2.2]paracyclophanes N2 - In dieser Arbeit wurde der elektronische Grundzustand und der erste angeregte Zustand sowie der Zustand des Ions von substituierten [2.2]Paracyclophanen untersucht. Um die Wechselwirkungen zwischen konjugierten pi-Systemen besser zu verstehen wurden die Moleküle mit Hilfe von Resonance Enhanced Multiphoton Ionization Spektroskopie (REMPI), VUV-Synchrotronstrahlung und quantenchemischen Rechnungen untersucht. Die Experimente wurden im Molekularstrahl durchgeführt. In den [1+1]-REMPI-Spektren von pseudo-para-Dibrom[2.2]paracyclophan, pseudo-para-Dicyano[2.2]paracyclophan, pseudo-ortho-Dicyano[2.2]paracyclophan, pseudo-para-Diphenyl[2.2]paracyclophan und pseudo-para-Di(trimethylsilyl)[2.2]paracyclophan wird ein kontinuierlicher Signalanstieg beobachtet. Individuelle Schwingungsbanden konnte nicht aufgelöst werden. Dies ist ein Hinweis darauf, dass die Schwingungszustände im S1-Zustand sehr eng beieinanderliegen. Der Schwerpunkt dieser Arbeit lag auf der Untersuchung der hydroxysubstituierten [2.2]Paracyclophane pseudo-ortho-Dihydroxy[2.2]paracyclophan (o-DHPC), pseudo-para-Dihydroxy[2.2]paracyclophan (p-DHPC) und racemisches-4-Hydroxy[2.2]paracyclophan (MHPC). Die adiabatischen Ionisierungsenergien der Moleküle wurden aus der Ionenstromkurve mit Hilfe eines Wannier-Fits bestimmt: 7.56eV (o-DHPC), 7.58eV (p-DHPC) und 7.63eV (MHPC). In den Schwellenphotoelektronenspektren (TPES) werden Signalmodulationen im Photonenenergiebereich von 7.8-11eV beobachtet. Hierbei handelt es sich um angeregte Zustände des Kations. Bei ca. 10.5eV wird in den Spektren von allen drei hydroxysubstituierten Molekülen dissoziative Photoionisation (DPI) beobachtet. Hierbei werden die Bindungen zwischen den aliphatischen Kohlenstoff-Atomen gebrochen. Im [1+1]-REMPI-Spektrum des o-DHPCs wird der S1<-S0-Übergang bei 31483cm^-1 (3.903eV) beobachtet. Die berechnete adiabatische Anregungsenergie liegt bei 3.87eV (SCS-CC2). Der elektronische Ursprung des o-DHPCs ist +722cm^-1 blauverschoben im Vergleich zum unsubstituierten [2.2]Paracyclophan (PC). Im REMPI-Spektrum werden viele Schwingungsbanden beobachtet. Cluster des o-DHPCs mit Wasser werden ebenfalls beobachtet. Die elektronischen Ursprünge der Cluster mit Wasser sind rotverschoben im Vergleich mit dem Monomer. Im o-DHPC(H2O)-Cluster ist das Wassermolekül zwischen den beiden OH-Gruppen des Cyclophans über Wasserstoffbrückenbindungen fixiert. In den REMPI-Spektren des o-DHPCs und o-DHPC(H2O)-Clusters wird die Atmungsmode mit hoher Intensität beobachtet. Außerdem tritt eine Twist- und Tilt-Mode in den Spektren auf. Viele Kombinationsbanden der Atmungs, Twist- und Tilt-Mode werden in den Spektren beobachtet. Im [1+1]-REMPI-Spektrum des p-DHPCs werden nur kleine Signalmodulationen mit niedrigen Intensitäten im roten Spektralbereich im Vergleich mit dem Ursprung des o-DHPCs beobachtet. Bei der Anregung des p-DHPCs kommt es zu einer großen Änderung der Struktur. Dies führt dazu, dass die Franck-Condon-Faktoren für den S1<-S0-Übergang des p-DHPCs deutlich kleiner sind im Vergleich mit dem o-DHPC (1:10^7). Daher treten die Signale des p-DHPCs im REMPI-Spektrum nur mit geringer Intensität auf. Der Ursprung des S1<-S0 Übergangs des MHPCs wird im [1+1]-REMPI-Spektrum bei 30772cm^-1 (3.815eV) beobachtet. Die berechnete Anregungsenergie liegt bei 3.79eV (SCS-CC2). Im Vergleich zum unsubstituierten PC wird keine wesentliche Energieverschiebung des S1<-S0-Übergangs beobachtet. Im REMPI-Spektrum des MHPCs wird die Twist-Mode beobachtet. Die Banden zeigen eine inverse Anharmonizität. Die ab-initio-Rechnungen beschreiben die Potentialkurve des S1-Zustands mit einem Doppelminimum. Die Höhe der Barriere zwischen den beiden Minima hängt vom Basissatz ab. Empirisch wurde entlang der Twist-Mode ein flaches Potential bestimmt. Die aus diesem Potenzial resultierenden Banden und Intensitäten der Twist-Mode stimmen mit den experimentellen Beobachtungen sehr gut überein. Die [1+1]-REMPI-Spektren des MHPCs mit einem und zwei Wassermolekülen zeigen einen kontinuierlichen Signalanstieg. Einzelne Schwingungsbanden konnten unter den experimentellen Bedingungen nicht aufgelöst werden. Der Ursprung des MHPC-Clusters mit einem Wassermolekül beginnt bei ca. -180cm^-1 und mit zwei Wassermolekülen bei ca. -290cm^-1 im Vergleich mit dem Ursprung des Monomers. N2 - This thesis examines the electronic ground state, first excited state and ion state of substituted [2.2]paracyclophanes. In order to unterstand the interactions between the two conjugated pi systems, the molecules were investigated by resonance-enhanced multiphoton ionization spectroscopy (REMPI), VUV-synchrotron radiation and quantum chemical calculations. The experiments were carried out in a supersonic jet. In the [1+1]REMPI spectra of pseudo-para-dibromo[2.2]paracyclophane, pseudo-para-dicyano[2.2]paracyclophane, pseudo-ortho-dicyano[2.2]paracyclophane, pseudo-para-diphenyl[2.2]paracyclophane and pseudo-para-di(trimethylsilyl)[2.2]paracyclophane, the signals are increasing almost continuously. Individual vibrational bands could not be resolved. This indicates that there are many closely spaced vibrational transitions. The main focus of this work was the examination of the hydroxysubstituted [2.2]paracyclophanes pseudo-ortho-dihydroxy[2.2]paracyclophane (o-DHPC), pseudo-para-dihydroxy[2.2]paracyclophane (p-DHPC) and racemic-4-hydroxy[2.2]paracyclophane (MHPC). The adiabatic ionization energies of the molecules were determined from a photoionization efficiency curve (PIE), using synchrotron radiation with a Wannier-type fitting procedure: 7.56eV (o-DHPC), 7.58eV (p-DHPC) and 7.63eV (MHPC). In the threshold photoelectron spectra (TPES), signal modulations were observed in the photon energy range of 7.8-11eV. These broad bands were assigned to excited states of the cation. At approximately 10.5eV, dissociative photoionization was observed in the spectra of all three hydroxysubstituted molecules and the bonds between the aliphatic carbon atoms were broken in [2.2]paracyclophanes. In the [1+1]REMPI spectrum of o-DHPC, the origin of the S1<-S0 transition lies at 31483cm^-1 (3.903eV). An adiabatic excitation energy of 3.87eV was computed on SCS-CC2 level. The electronic origin of o-DHPC is 722cm^-1 blue shifted in comparison with the unsubstituted [2.2]paracyclophane (PC). The REMPI spectra of o-DHPC-waterclusters were also recorded. The electronic origins of the clusters are red shifted in comparison with the monomer. In the o-DHPC(H2O)cluster, the water molecule is inserted between the two OH groups of the cyclophane via hydrogen bonds. The number of vibration bands is very high in the [1+1]REMPI spectra. Moreover, considerable activity in a breathing vibration is found in the S1 state of o-DHPC and o-DHPC(H2O). Further vibrations appear in the REMPI spectra of o-DHPC and o-DHPC(H2O) (twist mode and tilt mode). Many combination bands of the breathing, twist and tilt mode also occur in the spectra. In the [1+1]REMPI spectrum of p-DHPC, only small signal modulations with low intensities were observed in the red part, in comparison with the origin of o-DHPC. Drastic structural relaxation upon excitation was found in p-DHPC. Due to a strong structural change, the Franck-Condon factors of p-DHPC were found to be significantly smaller than those in o-DHPC (1:10^7). Therefore, only signals with low intensity were observed in the REMPI spectrum of p-DHPC. The origin of the S1<-S0 electronic transition was located at 30772cm^-1 (3.815eV) in the [1+1]REMPI spectrum of MHPC. The computed excitation energy on SCS-CC2 level is 3.79eV. In comparison with PC, no substantial energy shift of the S1<-S0 origin was observed. A significant geometry change upon electronic excitation indicated by the computations was confirmed by a twist and shift mode in the spectrum. The spacings of the twist bands show an inverse anharmonicity. The ab initio data predict a potential energy curve with a double minimum in the S1 state. The calculated barrier between the two minima depends on the basis set. A shallow potential along the twist coordinate was derived empirically. Good agreement of the resulting bands and intensities of the twist mode with experimental observations was achieved. The [1+1]REMPI spectra of MHPC with one and two water molecules show closely spaced transitions. Individual vibrational bands, however, could not be resolved under the experimental conditions. The signal onset in the cluster channel starts at approximately -180cm^-1 (one H2O) and -290cm^-1 (two H2O) to the red of the monomer origin. KW - Paracyclophane KW - REMPI KW - pi-pi-Wechselwirkung KW - Cyclophane KW - Photoionisation KW - Elektronische Anregung KW - Zwischenmolekulare Kraft KW - Gasphase KW - cyclophanes KW - photoionization KW - electronic excitation KW - pi-pi interaction KW - gas phase Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65374 ER - TY - THES A1 - Mager, Julian T1 - Synthese, Struktur und Reaktivität neuer [n]Metallocenophane T1 - Synthesis, Structure and Reactivity of new [n]Metallocenophanes N2 - Das Ziel dieser Arbeit bestand in der Synthese und Charakterisierung neuer Metallocenophane mit Sila-, Bora- und Stannabrücken. Sowohl für die Synthese über 1,1'-dimetallierte Metallocene als auch für die Synthese über die sogenannte flytrap-Methode sind dihalogenierte Brücken erforderlich. Für die Synthese neuer Trisilametallocenophane wurde deshalb eine verbesserte Synthese für 1,3-Diphenyl- und 1,3-Dichlorotrisilane erarbeitet. Die für die flytrap-Methode benötigten Liganden konnten aus 1,3-Dichloro-2,2-diisopropyltrisilan durch die Umsetzung mit den lithiierten Ringsystemen Lithiumindenid, Lithiumfluorenid und Lithiumoctafluorenid erhalten werden. Die dadurch dargestellten, zweifach arylsubstituierten Trisilane konnten anschließend erfolgreich mit BuLi zweifach lithiiert werden Das für die Darstellung von Triborametallocenophanen benötigte 1,3-Dibromo-1,2,3-tris(dimethylamino)triboran(5) sowie dessen Vorstufe 1,1,2,3,3-Pentakis-(dimethylamino)triboran(5) wurde über die bekannte Syntheseroute von Nöth et al. dargestellt. Durch eine Verbesserung der Reaktionsbedingungen konnten die Ausbeuten von 23% auf 36% bzw. auf 71% erhöht werden. Außerdem wurde eine Einkristallröntgenstrukturanalyse erhalten. Metallocenophane der 8. Gruppe werden meist durch Reaktion der 1,1'-dilithiierten Metallocenene mit dihalogenierten Brücken dargestellt. Um die Synthese von Rutheno- und Osmocenophanen zu ermöglichen, wurden Ruthenocen und Osmocen mit BuLi und pmdta als Hilfsbase lithiiert und erstmals als Feststoffe isoliert. Diese wurden mittels NMR-Spektroskopie und Einkristallröntgenstrukturanalyse untersucht, wodurch gezeigt wurde, dass sie wie 1,1'-Dilithioferrocen und 1,1'-Dilithometalloarenophane im Feststoff als dimere Verbindungen vorliegen. Aus thf konnte zusätzlich die Einkristallröntgenstrukturanalyse des thf-stabilisierten 1,1'-Dilithioruthenocen-Dimers erhalten werden Mit den in dieser Arbeit synthetisierten 1,3-Dichlorotrisilanen und 1,1'-Dilithioferrocen wurden die entsprechenden Trisilaferrocenophane synthetisiert und mittels NMR-Spektroskopie untersucht. Von der iPropyl-substituierten Verbindung konnte zusätzlich die erste Einkristallröntgenstrukturanalyse eines Trisilaferrocenophans erhalten werden Durch eine Umsetzung von 1,1‘-Dilithioruthenocen und –osmocen mit dem Diisopropyltrisilan konnten die ersten Trisilametallocenophane von Ruthenium und Osmium dargestellt werden. Durch die Umsetzung von 1,1‘-Dilithioosmocen mit Tetramethyldichlorodisilan gelang die Darstellung des ersten Osmocenophans mit einer zweiatomigen Brücke. Von Tetramethyldisilaosmocenophan konnte eine Einkristallröntgenstrukturanalyse erhalten werden. Die Syntheseroute von Tetra-tert-butyldistannaferrocenophan von Braunschweig et al. konnte erfolgreich auf die Synthese der Ruthenium- und Osmiumanaloga übertragen werden. Die zinnverbrückten Metallocenophane konnten NMR-spektroskopisch und durch eine Einkristallröntgenstrukturanalyse charakterisiert werden. Die von Wrackmeyer et al. und Braunschweig et al. bekannte Insertion von Chalkogenen in die Zinn-Zinn-Bindung konnte ebenfalls für die Verbindungen gezeigt werden. Dabei konnte eine deutliche Verkürzung der Reaktionszeit von 10 d auf 1 d durch die Zugabe von einem Äquivalent pmdta zur Reaktionsmischung erreicht werden. Mit der Ligandenvorstufe 1,2-Bis(lithio-cyclopentadienid)-1,1,2,2-tetra-tert-butyldistannan konnten über die flytrap-Methode die Distannametallocenophane von Cobalt und Nickel synthetisiert werden. Zudem konnten beide Verbindungen mit Ferroceniumhexafluorophosphat einfach oxidiert werden. Die beiden 19-Valenzelektronenverbindungen wurden mittels ESR-Spektroskopie untersucht. Von beiden Cobaltocenophanen sowie vom Nickelocenophan konnte eine Einkristallröntgenstrukturanalyse erhalten werden. N2 - The aim of this work consisted in the synthesis and characterization of new metallocenophanes with sila-, bora-, and stanna-bridges. Dihalogenated bridges are necessary both for the synthesis via 1,1’-dimetalated metallocenes and for the synthesis via the so-called flytrap method. Therefore, the first step consisted in the development of an improved synthetic procedure for the synthesis of 1,3-diphenyl-, and 1,3-dichlorotrisilanes. The ligands necessary for the flytrap method were obtained by reacting 1,3-dichloro-2,2-diisoporpltrisilan with the lithiated ring systems lithium indenide, lithium fluorenide, and lithium octafluorenide. Subsequently, a twofold lithiation of these molecules was carried out successfully with BuLi. 1,3-Dibromo-1,2,3-tris(dimethylamino)triborane(5), which is necessary for the synthesis of triborametallocenophanes, and its precursor 1,1,2,3,3,-pentakis(dimethylamino)-triborane(5) were synthesised via the synthetic procedure of Nöth et al.. By adjusting the reaction parameters, the yields were improved from 23% to36% and to 71%. Additionally, a solid state structure was obtained. Metallocenophanes of group 8 are generally synthesised by reacting 1,1'-dilithiated metallocenes with dihalogenated bridges. To achieve the synthesis of ruthenocenophanes and osmocenophanes, ruthenocene and osmocene were lithiated with BuLi and pmdta and isolated for the first time as solids. These were analysed via NMR spectroscopy and molecular structure analysis. This showed that both are dimers in the solid state, similar to 1,1'-dilithioferrocene and 1,1'-dilithiometalloarenophane. Additionally, the solid state structure of the thf-stabilised 1,1'-dilithioruthenocene dimer was obtained. Using the trisilanes and 1,1’-dilithioferrocene, new trisilaferrocenophanes were synthesised and analysed via NMR spectroscopy. Additionally, the first example of a crystal structure analysis of a trisilaferrocenophane was obtained. By reacting 1,1’-dilithioruthenocene and -osmocene with diisopropyltrisilane, the first trisilametallocenophanes of ruthenium and osmium were obtained. The reaction of 1,1’-dilithioosmocene with Me4Si2Cl2 resulted in the first osmocenophane with a diatomic bridge Also, a crystal structure analysis was obtained. The earlier synthesis of tetra-tert-butyldistannaferrocenophane by Braunschweig et al. was successfully transferred to the synthesis of the ruthenium and osmium analogues. The tin-bridged metallocenophanes were characterised by NMR spectroscopy and molecular structure analysis. The insertion of chalcogens into the tin-tin bond, previously reported by Wrackmeyer et al. and Braunschweig et al. was also shown. By adding one equivalent of pmdta to the reaction mixture, the reaction time was shortened significantly from 10 d to less than1 d. Using the ligand precursor 1,2-bis(lithio-cyclopentadienide)-1,1,2,2-tetra-tert-butyldistannane and the flytrap method, the distannametallocenophanes of cobalt and nickel were synthesised. Additionally, both compounds were oxidised by one electron using ferrocenium hexafluorophosphate. The 19 valence electron compounds were analysed via ESR spectroscopy. Crystal structure analyses were obtained from both cobaltocenophanes as well as the nickelocenophane. KW - Metallocene KW - Cyclophane KW - Übergangsmetallorganische Verbindungen KW - Metallocenophane KW - Übergangsmetalle KW - ansa KW - Metallorganic KW - Osmium KW - Ruthenium KW - Esien KW - Cobalt KW - Nickel KW - Zinn KW - Silicium KW - Bor KW - Metallocenophanes KW - Transition Metals KW - ansa KW - metal organic Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-78384 ER - TY - THES A1 - Kraft, Mario T1 - [1]- und [2]Borametallocenophane der Gruppe-4-Metalle : Synthese, Struktur und katalytische Aktivität T1 - [1]- and [2]Borametallocenophanes of Group 4 metals - Synthesis, Structur und catalytic Activity N2 - In der vorliegenden Arbeit wird über die Synthese, Struktur und katalytische Aktivität von borverbrückten Gruppe 4 Metallocenophanen berichtet, die als Katalysatoren in der Ziegler-Natta-artigen Olefinpolymerisation eingesetzt werden können. Neben den bereits bekannten [1]Borametallocenophanen wurden weitere Komplexe mit unterschiedlichen Substituenten, als auch die bislang unbekannten [2]Borametallocenophane synthetisiert und charakterisiert. Vergleichende Polymerisationsstudien einer Reihe von unterschiedlich substituierten [n]Borametallocenophanen (n = 1,2) wurden unter definierten Standardbedingungen durchgeführt, um einen möglichen Einfluss der am Boratom gebundenen Substituenten zu beobachten. Weitergehende Untersuchungen bezogen sich auf den Einfluss dieser Substituenten auf sterische und elektronische Einflüsse, die mit den Polymerisationsergebnissen korreliert wurden. Hierbei wurden die sterischen Einflüsse der verschiedenen Substituenten anhand der Kristallstrukturen festgemacht; elektronische Einflüsse sollten anhand von CO Schwingungen, die mittels Infrarotspektroskopie beobachtet werden können, von korrespondierenden Carbonylkomplexen und alternativ mittels 91Zr-NMR Spektroskopie untersucht werden. N2 - In this thesis the synthesis, structure and catalytic activity of boron bridged Group 4 metallocenophanes are reported. These type of complexes are suitable catalyst precursors for the Ziegler-Natta-type olefin polymerization. Besides the known [1]borametallocenophanes new complexes with different substituents as well as the so far unknown [2]borametallocenophanes were synthesized and characterized. A series of differently substituted [n]borametallocenophanes (n = 1,2) were used under defined polymerization conditions, to study a possible influence of the substituents at boron on the catalytic performance. Furthermore, the influence of steric and electronic parameters was evaluated. X-ray structural determinations were used to determine steric changes imposed by the different substituents. Electronic changes were analyzed with the aid of infrared spectroscopy by comparison with the corresponding carbonyl complexes and, alternatively, by 91Zr NMR spectroscopy. KW - Borkomplexe KW - Metallocene KW - Vierte Nebengruppe KW - Cyclophane KW - Bor KW - Metallocenophane KW - ansa-Metallocene KW - Olefinpolymerisation KW - Boron KW - Metallocenophanes KW - ansa-Metallocenes KW - olefin polymerization Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14689 ER -