TY - THES A1 - Weckwerth, Felix T1 - Antibiotikafreisetzung und Klebefestigkeit modifizierter PMMA Knochenzemente T1 - Antibiotic release and bonding strength of modified PMMA bone cements N2 - Im Rahmen dieser Arbeit wurden zwei modifizierte Knochenzemente auf ihre Klebefestigkeit und Antibiotikafreisetzung untersucht und mit dem herkömmlichen Biomet Bone Cement verglichen. Beiden Modifikationen wurde Hydroxyethylmethacrylat-Phosphat (HEMA-P) untergemischt. Die eine Modifikation war zusätzlich mit Natriumcarbonat und Calciumchlorid beladen. Der mit HEMA-P, Natriumcarbonat und Calciumchlorid modifizierte Knochenzement erreichte initial lediglich 85 Prozent der Zug- und 81 Prozent der Zugscherkräfte des Biomet Bone Cements. Nach einem künstlichem Alterungsprozess lagen die Zug- und Zugscherkräfte auch deutlich unter denen des Vergleichszementes. Allerdings konnte bei diesem Zement eine große Abgabemenge von Antibiotikum festgestellt werden. Diese lag nach Ablauf von 3 Wochen bei Gentamicin etwa zweifach und bei Vancomycin um den Faktor 25 über der Menge, die der Biomet Bone Cement freisetzte. Die Klebefestigkeit und Antibiotikaabgabewerte des mit HEMA-P modifizierten Zementes ähnelten den Werten des Biomet Bone Cementes N2 - The aim of the study was to examine two modified bone cements on its tensile strength and antibiotic release. Both cements were modified with Hydroxyethylmethacrylat phosphate (HEMA-P), the one modification was additionally loaded with Natriumcarbonat and calcium chloride. With HEMA-P, Natriumcarbonat and calcium chloride modified bone cement reached initially only 85 per cent of the tensile strength of the conventional Biomet Bone Cements. After an artificial aging process the tensile strength was also clearly under those of the comparison cement. However a large delivery quantity of antibiotic could be determined with this cement. This lay at expiration of 3 weeks with Gentamicin about doubly and with Vancomycin around the factor 25 over the quantity, which the Biomet Bone Cement set free. The tensile strength and antibiotic release of the cement modified with HEMA-P resembled the values of the Biomet Bone Cementes. KW - Knochenzement KW - PMMA KW - Antibiotikafreisetzung KW - antibiotic release KW - bone cement KW - tensile strength Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-38943 ER - TY - THES A1 - Lehnert, Teresa T1 - Biomechanische Eigenschaften von Knochenersatz und Schraubenosteosynthese in der Stabilisierung von Tibiakopffrakturen bei Osteoporose T1 - Biomechanical characteristics of bone substitute and screw osteosynthesis in stabilization of tibial depression fractures in osteoporotic bones N2 - Das Ziel dieser Arbeit war die Untersuchung eines neuen bohrbaren Kalziumphosphatzements (Norian drillable Synthes GmbH) sowohl als alleiniges Knochenersatzmaterial als auch in Kombination mit Schrauben, die in Jail-Technik angebracht wurden bei der Versorgung von lateralen Tibiakopfimpressionsfrakturen. Laterale Tibiakopfimpressionsfrakturen wurden dafür in einem biomechanischen Frakturmodell künstlich erzeugt. Die Präparate wurden mit Knochenersatzmaterial (Gruppe 1), Knochenersatzmaterial mit zusätzlichen vier Schrauben in Jail-Technik (Gruppe 2) oder lediglich mit vier Schrauben (Gruppe 3) stabilisiert. Anschließend wurde das Einsinken des Knochens (Displacement) unter zyklischer Belastung sowie Steifigkeit und Maximalbelastung in load-to-failure-Tests ermittelt. Die Gruppen, die mit Knochenersatzmaterial versorgt wurden, zeigten unter zyklischer Belastung ein geringeres Displacement und eine höhere Steifigkeit. Die Maximalbelastung, der die Knochen in der Load-to-failure-Testung standhielten, war indes höher für die Gruppen, die mit Schrauben versorgt wurden. Fazit: Die Kombination aus Unterfütterung mit Knochenersatzmaterial und Stabilisierung mit Schrauben bietet die umfangreichste Versorgung bei lateralen Tibiakopfimpressionsfrakturen. N2 - The aim of this study was to investigate a new drillable calcium phosphate cement (Norian drillable Synthes GmbH) as a bone substitute either alone or in combination with screws in the jail technique with regard to the primary stability in lateral tibial depression fractures. Lateral depression fractures of the tibial plateau were created in a biomechanical fracture model. After reduction they were stabilised with bone substitute (group one), bone substitute with additional four screws in the jail technique (group two) or four screws only (group three). Displacement under cyclic loading, stiffness and maximum load in load-to-failure tests were determined. The groups with the bone substitute showed a lower displacement of the depressed articular fragment under cyclical loading and a higher stiffness. The maximum load was higher for the groups with screws. Conclusions: Only the combination of bone substitute and screws prevented secondary loss of reduction and, at the same time, provided enough stability under maximum load. KW - Tibiaplateau KW - Tibiakopfbruch KW - Knochenzement KW - Tibiakopfimpressionsfraktur Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-98362 ER - TY - THES A1 - Heilig, Philipp T1 - Biomechanische Evaluation neuartiger Knochenersatzmaterialien zur Therapie der Tibiakopfimpressionsfraktur T1 - Biomechanical evaluation of new bone substitutes for the therapy of tibial head depression fractures N2 - Tibiakopfimpressionsfrakturen (AO 41-B2.2 – Schatzker III), welche aufgrund der demographischen Entwicklung in ihrer klinischen Relevanz zunehmen, erfordern zur bestmöglichen Frakturstabilisierung eine Schraubenosteosynthese sowie eine stabile metaphysäre Defektauffüllung mittels Knochenersatzmaterial, da anderenfalls ein sekundärer Repositionsverlust mit konsekutiver Gonarthrose droht. Die hierbei eingesetzten Kalziumphosphatzemente bringen klinische Probleme wie geringe mechanische Stabilität, fehlende Bohrbarkeit, welche eine unvollständige Defektauffüllung bedingt, ungewisse Resorption und unüberprüfte Herstellerangaben mit sich. Diese Studie hatte daher zum Ziel, einen bohrbaren Kalziumphosphatzement und einen Magnesiumphosphatzement, welche als vielversprechende Alternativen aufgrund der klinischen Schwierigkeiten erscheinen, gegen Graftys® Quickset und ChronOS™ Inject biomechanisch einzuordnen und somit langfristig zu einer verbesserten Frakturversorgung beizutragen. Der erste Teil der Studie bestand aus einer reinen Materialprüfung, in der mittels Zementquader Druckversuche und mittels Ausrisskörper Zugversuche durchgeführt wurden. Im zweiten Teil wurde ein Frakturmodell für Impressionsfrakturen an Kunstknochen benutzt, um die Zemente hierbei zur Defektauffüllung zu verwenden und alleine sowie in Kombination mit einer Osteosynthese in der Jail-Technik zu testen. Es erfolgte eine zyklische Belastung mit 3000 Zyklen zu je 250 N sowie anschließend eine Maximalkrafttestung (Load-To-Failure) mit Hilfe einer Materialprüfmaschine. Der Magnesiumphosphatzement zeigte die signifikant höchste Kompressionsfestigkeit von 100,50 MPa ± 15,97 MPa und Ausrisskraft sowie im Verbund mit Knochen das geringste Displacement, höchste Maximalkraft und Steifigkeit. Kalziumphosphat bohrbar wies aufgrund seines pseudoplastischen Verhaltens eine geringe biomechanische Stabilität und ein hohes Displacement auf, konnte aber durch seine Bohrbarkeit gegenüber Graftys® Quickset bei Einsatz mit Schrauben einen Vorteil im Displacement erreichen und somit die Vorzüge eines bohrbaren Knochenzements aufzeigen. ChronOS™ zeigte nach Aushärtung im Wasserbad mit einer Kompressionsfestigkeit von 0,58 MPa ± 0,14 MPa eine niedrige biomechanische Stabilität und wurde daher nicht weiter untersucht. Da die Viskosität eines Zements neben anderen Faktoren für die Interdigitation mit den Spongiosahohlräumen im Knochen verantwortlich ist, lässt sich, sofern diese angemessen ist, Rückschlüsse von der Materialprüfung auf das Verhalten im Knochen ziehen. Magnesiumphosphatzemente erscheinen aufgrund ihrer hohen biomechanischen Stabilität und vermutlich guten Resorptionsrate als vielversprechende Alternative zu herkömmlichen Kalziumphosphatzementen und bedürfen daher einer weiteren Überprüfung im Tierversuch. N2 - Bone substitutes are commonly used for filling up bone defects like in tibial head fractures. Different types of commercial bone substitutes are available, but comparable biomechanical studies especially analysing the substitute-bone interaction are missing. Thus, this study investigated the basic biomechanical characteristics of different bone substitutes, the bonesubstitute interface and the combination of substitute and screw osteosynthesis in a biomechanical fracture model for tibial head fractures (Schatzker III fractures). An in-house developed drillable apatite cement with HEMA-Hydrogel and an in-house developed magnesium phosphate cement were compared with two commercial cements, one brushite and one apatite cement, namely ChronOS™ Inject and Graftys® Quickset. In axial compression tests, the compressive strength and in screw pull-out tests, the pull-out strength were determined. In a tibial head fracture model, the bone substitutes were applied for filling up the bone defect, alone and in combination with a screw osteosynthesis. Displacement of the fracture fragment, maximum load and stiffness were calculated in cyclic and maximal axial loading tests. All tests were performed in the material testing machine Zwick Roell® Z020. The drillable apatite cement exhibited lower compressive strength (6.8±1.4 MPa) and screw pullout force (129±38 N) compared to its counterpart Graftys® (19.0±2.5 MPa, 295±39 N), but showed comparable displacement (~2 mm) and maximum load (3.5-3.8 kN) in the fracture model combined with the Jail-Technique. This may be due to the fact that the drillable cement allowed for drilling after replenishment and thus precise dispersion of the cement paste. The magnesium phosphate cement revealed a significant higher compressive strength (100.5±16.0 MPa), screw pull-out strength (1.7±0.2 kN) and a significant lower displacement (~1.5 mm) compared to the other bone substitutes. Probably due to its high intrinsic strength combined with a low viscosity to fill the complete defect. For the combination with screws, all bone substitutes revealed higher maximum loads and stiffness values. In conclusion, magnesium phosphate cement provided a high biomechanical stability in the pure material testing series and also in the substitute-bone interaction tests. Due to a low viscosity, the cement revealed a high integration in the spongiosa and a complete filling up of the bone defect around the placed screws. Moreover, a drillable bone substitute is favourable as the dispersion of the cement paste is not hindered by formerly placed screws. For tibial head fractures, only the combination of bone substitute and screw osteosynthesis provides under lower and maximal loading conditions an adequate stability. KW - Knochenzement KW - Knochenersatzmaterial KW - Bohrbarkeit KW - Tibiakopfbruch KW - Osteosynthese KW - bone substitute KW - drillable KW - struvite KW - tibial fracture KW - calcium phosphate cement KW - Tibiakopfimpressionsfraktur KW - Knochenzement KW - Magnesium Phosphat Zement KW - Kalzium Phosphat Zement KW - bohrbares Knochenersatzmaterial Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-171037 ER - TY - THES A1 - Hinderer, Sandra T1 - Charakterisierung der Freisetzung verschiedener Antibiotika aus resorbierbaren anorganischen Knochenersatzmaterialien sowie die Untersuchung des Einflusses auf materialcharakteristische Eigenschaften T1 - Characterization of the release of various antibiotics from resorbable inorganic bone substitute materials and the study of the influence on material characteristic properties N2 - Synthetische anorganische Knochenersatzmaterialien auf Calcium-Phosphat- und Magnesium-Phosphat-Basis wurden in der hier vorliegenden Dissertation mit verschiedenen handelsüblichen Antibiotika versetzt und deren Freisetzungsverhalten charakterisiert. Zudem wurde der Einfluss des Antibiotikazusatzes auf bestimmte materialcharakteristische Eigenschaften untersucht, hierbei fanden die Quecksilberporosimetrie, die Röntgendiffraktometrie und die Rasterelektronenmikroskopie ihre Anwendung. Insbesondere für die Knochenersatzmaterialien auf Calcium-Phosphat-Basis sollte eine klinisch praktikable und demnach möglichst einfache Methode etabliert werden, um die Kombination mit einem Antibiotikum durchzuführen. Die Detektion der Antibiotika erfolgte mit Hilfe eines UV/VIS-Spektrophotometers. Zudem wurde für einige ausgewählte Kombinationen aus Antibiotikum und Knochenersatzmaterial durch einen Agardiffusionstest die antibakterielle Wirkung nach der Freisetzung aus dem jeweiligen Trägermaterial bestätigt. N2 - Synthetic inorganic bone substitute materials based on calcium phosphate and magnesium phosphate were mixed with various commercially available antibiotics and their release behavior was characterized in the present dissertation. In addition, the influence of the antibiotic addition on certain material characteristic properties was investigated using mercury porosimetry, X-ray diffractometry and scanning electron microscopy. For the calcium-phosphate-based bone substitutes in particular, the aim was to establish a clinically practicable and therefore as simple as possible method for carrying out the combination with an antibiotic. Antibiotics were detected using a UV/VIS spectrophotometer. In addition, for some selected combinations of antibiotic and bone substitute material, an agar diffusion test was used to confirm the antibacterial effect after release from the respective carrier material. KW - Wirkstofffreisetzung KW - Antibiotikum KW - Knochenzement KW - Calciumphosphat KW - UV-VIS-Spektroskopie KW - Antibiotikafreisetzung KW - local drug delivery Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-230836 ER - TY - THES A1 - Blank, Melanie T1 - Entwicklung und materialwissenschaftliche Untersuchungen von Calcium- und Magnesiumphosphat-Biozementen T1 - Development and material-scientific investigations of calcium and magnesium phosphate bio cements N2 - Ziel der Arbeit war die Herstellung und materialwissenschaftliche Untersuchung verschiedener Calciumphosphat-Zemente. Zwei unterschiedliche Zementtypen wurden dargestellt: eine Matrix bestand aus thermomechanisch aktiviertem Hydroxylapatit, die bei basischen pH-Werten zu nanokristallinem HA abbindet; eine zweite Matrix aus magnesiumsubstituierten ß-Tricalciumphosphaten und saurem Calcium-bis-dihydrogenphosphat reagiert zu sekundärem Calcium- bzw. Magnesiumhydrogenphosphat als Endprodukt. Die Werkstoffe wurden hinsichtlich ihrer Druckfestigkeit als abgebundener Zement, der Abbindezeit, des pH-Wert-Verlaufs während des Abbindens, mittels XRD-Analyse auf ihre Zusammensetzung, die durchschnittliche Partikelgröße der jeweiligen Mahlungen und auf ihre Dichte hin untersucht. Die bisher ermittelten Kennwerte der Zementmatrices sind auf jeden Fall ein guter Ausgangspunkt für eine spätere klinische Anwendung; die Zemente könnten bisher gebräuchliche Werkstoffe in ihrer Funktion als Knochenersatzpräparate sinnvoll ergänzen. N2 - The aim oft he study was the production and material-scientific investigation of different calcium phosphate cements. Two different cement types were represented: a matrix consisted of thermalmechanically activated hydroxyl apatite, which ties at basic pH values to nano-crystalline ha; a second matrix from magnesium-substituted ß-Tricalciumphosphaten and sour calcium to dihydrogenphosphat reacted to secondary calcium and/or magnesium hydraulic gene phosphate as final product. The materials became regarding their pressure strength as tied cement, the setting time, the pH value process during tying, by means of XRD analysis on their composition, which examines average particle size of the respective grinding and for its density. The characteristic values of the Zementmatrices determined so far are in any case a good starting point for a later clinical application; the cements could supplement materials used so far in their function as bone spare preparations meaningfully. KW - Knochenzement KW - Calciumphosphat KW - Magnesiumphosphat KW - Knochenersatzmaterial KW - bone cement Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-38934 ER - TY - THES A1 - Morabbian, Jasamin T1 - Etablierung von Stammzell-Sphäroiden mit inkorporierten Biokeramik-Partikeln zur Förderung der osteogenen Differenzierung T1 - Establishment of stem cell spheroids with incorporated bioceramic particles for the promotion of osteogenic differentiation N2 - In der vorliegenden Dissertationsarbeit wurden Sphäroide aus mesenchymalen Stammzellen aus dem Fettgewebe oder dem Knochenmark mittels der Micromold-Methode hergestellt. Den Sphäroiden wurden entweder Calciumphosphat- oder Calcium-Magnesium-Phosphat-Partikel hinzugefügt. Zum einen sollte überprüft werden, ob die Zugabe von Partikeln die osteogene Differenzierung der Sphäroide fördert und somit zur weiteren Entwicklung von körpereigenem Knochenersatzmaterial in der regenerativen Medizin beiträgt. Zum anderen sollte festgestellt werden, ob eine der beiden Biokeramiken hinsichtlich der osteogenen Differenzierung überlegen ist. N2 - In this dissertation, spheroids were produced from mesenchymal stem cells from adipose tissue or bone marrow using the micromold method. Either calcium phosphate or calcium magnesium phosphate particles were added to the spheroids. On the one hand, it was to be examined whether the addition of particles promotes the osteogenic differentiation of the spheroids and thus contributes to the further development of endogenous bone replacement material in regenerative medicine. Secondly, to determine whether one of the two bioceramics is superior in terms of osteogenic differentiation. KW - Stammzelle KW - Calciumphosphat KW - Spheroid KW - Knochenzement KW - Knochenersatzmaterial KW - Calcium-Magnesium-Phosphat Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-369256 ER - TY - THES A1 - Heilig, Maximilian T1 - Experimentelle biomechanische Analyse von unterschiedlichen Knochenzementen bei der in-situ-Implantataugmentation T1 - Experimental biomechanical analysis of different bone cements for in situ implant augmentation N2 - Für den Funktionserhalt nach einer Fragilitätsfraktur ist eine stabile Osteosynthese, welche eine frühfunktionelle Nachbehandlung zur Vermeidung längerer Immobilität erlaubt, mit suffizienter Reposition essenziell. Die stabile Osteosynthese kann in osteoporotischem Knochen jedoch durch dessen schwache biomechanische Eigenschaften limitiert sein. Indem die in-situ-Implantataugmentation mit Knochenzement die Belastbarkeit des Knochens in Implantatnähe verbessert, kann auch in osteoporotischem Knochen eine stabile Osteosynthese erreicht werden. Ziel dieser Studie war es, eine vielversprechende Formulierung eines Magnesiumphosphatzementes so weiterzuentwickeln, dass deren Anwendung bei der in-situ-Implantataugmentation möglich wurde. In einem zweiten Schritt sollte die Formulierung gegenüber kommerziell erhältlichen Knochenzementen durch die Materialprüfung im Druckversuch und mithilfe eines biomechanischen Testmodells evaluiert werden. Die Vorversuche offenbarten die Nachteile der konventionellen, wasserbasierten Magnesiumphosphatzementformulierung bei der in-situ-Implantataugmentation: „Filter Pressing“ und eine unpassende Viskosität limitierten die Anwendung. Erst die Formulierung als vorgemischte Magnesiumphosphat-Paste mit Propan-1,2,3,-triol als Bindemittel verbesserte die Injizierbarkeit und ermöglichte eine verlässliche in-situ- Implantataugmentation. Bei der Zementevaluation zeigte Traumacem™ V+ als PMMA-Zement die höchste Kompressionsfestigkeit im Druckversuch, die höchste Rotationsstabilität in der Torsionsprüfung und eine sehr gute Injizierbarkeit. Paste-CPC und MgPO-Paste zeigten sich in Druckversuch und Torsionsprüfung untereinander vergleichbar, wobei die MgPO-Paste tendenziell eine initial höhere Stabilität aufweist. Für den Parameter Normalisiertes Drehmoment zeigten alle Zementgruppen einen statistisch signifikanten Unterschied zur Kontrollgruppe, was den stabilitätssteigernden Effekt aller verwendeten Knochenzemente demonstriert. Es konnte kein Effekt der in-situ-Implantataugmentation auf Phimax, also auf den, bis zum maximalen Drehmoment gefahrenen Winkel, gefunden werden. Die Korrelation zwischen Drehmoment und Knochendichte zeigte den Zusammenhang zwischen Rotationsstabilität und Knochendichte für die Kontrollgruppe, welcher jedoch bei Zementaugmentation mit Traumacem™ V+ und MgPO-Paste verschwand. Zusammengefasst wurde in dieser Studie erstmals eine biologisch vorteilhafte MgPO- Paste für den Einsatz bei der in-situ-Implantataugmentation entwickelt und verwendet. Weiter konnte der stabilitätssteigernde Effekt der Zementaugmentation mit dieser MgPO-Paste, sowie mit den Knochenzementen Traumacem™ V+ und Paste-CPC, für TFNA-Schenkelhalsklingen im isolierten Femurkopf-Modell gezeigt werden. Der Einsatz der MgPO-Paste bei der in-situ-Implantataugmentation bedarf bis zur eventuellen Marktreife einer Verbesserung der Injizierbarkeit sowie der Evaluation in klinischen Studien. N2 - A stable osteosynthesis with sufficient reduction is essential to achieve a good outcome in patients suffering a fragility fracture. However, the stability of the osteosynthesis may be limited in osteoporotic bone by its weak biomechanical properties. In situ implant augmentation with bone cement can help to achieve a sufficient osteosynthesis even in osteoporotic bone by improving the load-bearing capacity of the bone near the implant. The aim of this study was to further develop a promising formulation of a magnesium phosphate cement for in situ implant augmentation. Secondly, the formulation was to be evaluated against commercially available bone cements by material testing in compression and by using a biomechanical test model. The preliminary tests revealed the disadvantages of the conventional, water-based magnesium phosphate cement: filter pressing and an unsuitable viscosity limited its application. Only the formulation as a premixed magnesium phosphate paste with propane-1,2,3,-triol as a binding agent showed improved injectability and enabled reliable in situ implant augmentation. In cement evaluation, Traumacem™ V+ as PMMA cement showed the highest compressive strength in compression test, the highest rotational stability in torsion test and very good injectability. Paste-CPC and MgPO paste showed comparable performance to each other in compression and torsion test, with MgPO paste tending to show initially a higher stability. For the parameter “normalized torque”, all cement groups showed a statistically significant difference from the control group, demonstrating the effect of cement augmentation for all bone cements. No effect of in situ implant augmentation on Phi max , the angle driven to the maximum torque, could be found. The correlation between torque and bone mineral density showed the relationship between rotational stability and bone mineral density for the control group, but this correlation disappeared when cement augmentation with Traumacem™ V+ or MgPO paste was performed. In summary, this study was the first to develop and use a biologically beneficial MgPO paste for in situ implant augmentation. Further, the effect of cement augmentation with this MgPO paste, as well as with Traumacem™ V+ and Paste- CPC, was demonstrated for TFNA femoral neck blades in an isolated femoral head model. Before becoming commercially available, the use of MgPO paste for in situ implant augmentation may require improved injectability and evaluation in clinical studies. KW - Osteoporose KW - Implantat KW - Knochenzement KW - Magnesiumphosphate KW - in-situ-Implantataugmentation KW - TFNA KW - Schenkelhalsklinge KW - Injektion Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-319868 ER - TY - THES A1 - Helf, Christian T1 - Herstellung von Polymethacrylat/Calciumphosphat-Implantatwerkstoffen durch den 3D-Pulverdruck T1 - Preparation of polymethacrylate/calcium phosphate implant materials via 3D powder printing N2 - Die Erstellung von komplex geformtem Knochenersatz wurde durch den 3D-Pulverdruck unter Verwendung von Calciumphosphatmaterialien beschrieben. Gegenstand der vorliegenden Arbeit war deren Modifikation durch die Verwendung von Methacrylatkunststoffen. Ziel war es, durch die Infiltration von nicht resorbierbaren Kunststoffen, wie sie in kommerziell erhältlichen Knochenzementen verwendet werden, die mechanischen Eigenschaften der nicht gesinterten Keramikstrukturen zu verbessern. Getestet wurden verschiedene Methoden der Infiltration sowie der nachfolgenden Polymerisationsinitiierung durch chemische, thermische oder photochemische Aktivatoren. Daneben erfolgte der Druck von Tricalciumphosphat-Pulvern, die mit Polymethylmethacrylat Partikeln versetzt wurden und durch eine hydraulische Verfestigungsreaktion mit Phosphorsäure aushärten. Die erstellten Materialien wurden auf ihre Porosität, ihre mechanischen Eigenschaften sowie auf die Phasenzusammensetzung ihrer anorganischen Matrix und den Konversionsgrat ihrer organischen Komponente hin untersucht. Es gelang, die freie Porosität der Calciumphosphat-Matrix durch Verwendung von flüssigen, monomeren Kunststoffen zu füllen und diese durch eine thermische Initiierung der radikalischen Polymerisation vollständig zur Aushärtung zu bringen. Bei der Reaktion kommt es neben einer Polymerisationskontraktion im organischen Bestandteil der Kunststoffe zu einer Phasenumwandlung der Bruschitanteile der Calciumphosphat-Matrix. Proben, die mit einem flüssigen Bisphenol-A-Derivat versetzt wurden, zeigten eine Verdreifachung ihrer Festigkeit und erreichten maximale Druckfestigkeiten von 99 MPa, Biegefestigkeiten von 35 MPa und einen E-Modul von 18 GPa. Verglichen mit den biomechanischen Eigenschaften des physiologischen Hartgewebes liegen die Werte damit deutlich über denen von spongiösem und unter denen von kortikalem Knochen. Eine künftige Optimierung erscheint durch die Schaffung einer chemischen Verbundphase zwischen dem anorganischen Calciumphosphat-Gefüge und den Polymerbestandteilen als aussichtsreich. N2 - The production of complex shaped bone graft was described by the 3D powder printing using calcium phosphate materials. The present work dealt with the modification of these materials by adding methylacrylate materials. The objective was to improve the mechanical properties of non-sintered ceramic structures by the infiltration of non-resorbable plastics such as used in commercialized bone cements. Different methods of infiltration as well as chemical, thermal or photochemical polymerization activators have been tested. In addition to that, tricalcium phosphate powders have been enriched by polymethylmethacrylate particles before being printed and cured by an hydraulic hardening reaction with phosphoric acid. The prepared materials have been tested for their porosity, their mechanical properties as well as for the phase composition of their inorganic matrix and the conversion rate of their organic components. It could be achieved to fill the open porosity of printed calcium phosphate matrix by using liquid, monomeric plastics and to cure them completely through a thermal initiation of radical polymerization. Besides the polymerization contraction in the organic component, the thermal treatment led to a phase transformation of the calcium phosphate brushite matrix. Samples, which were infiltrated with a liquid bisphenol-A derivative, showed a threefold increase of their strength and reached a maximum compressive strength of 99 MPa, a flexural strength of 35 MPa and a Young´s modulus of 18 GPa. Compared to biomechanical properties of physiological hard tissues, the levels were significantly higher than those of cancellous and lower than those of cortical bones. To further optimize, it seems promising to create a chemical bond between the inorganic phase of calcium phosphate microstructure and polymer components. KW - Rapid Prototyping KW - Knochenersatz KW - Knochenzement KW - Methacrylsäuremethylester KW - 3D-Pulverdruck KW - Calciumphosphat KW - Rapid Prototyping KW - 3D powder print KW - bone cements KW - methacrylate KW - calcium phosphate Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-39575 ER - TY - THES A1 - Koerdt, Steffen Christian Alexander T1 - Immunhistochemische Untersuchungen zur Expression von Wachstumsfaktoren im Rahmen der Vaskularisation knöcherner Kieferkammaugmentate im Schafmodell T1 - Expression of growth factors of the vascularization in alveolar ridge augmentation procedures using autogenous bone grafts : An immunhistochemical study in the sheep N2 - In der vorliegenden Arbeit wurde die Expression unterschiedlicher Marker für die Vaskularisation in verschiedenen Modifikationen zur Unterkieferaugmentation mit autologem kortikospongiösen Beckenkammtransplantaten in-vivo am Schafmodell untersucht. Wie schon aus Voruntersuchungen bekannt, zeigte vor allem die Modifikation des Transplantatlagers in der Kombination einer resorbierbaren Bio-Gide® Membran mit dem Knochenersatzmaterial (KEM) Bio-Oss® und einem kortikospongiösen Transplantat die geringsten Resorptionsraten. Dieser Konditionierung wurden verschiedene andere Modikifationen des Transplantatlagers gegenübergestellt und jeweils die Expression der Vaskularisationsmarker untersucht und verglichen. Sowohl die Untersuchungen zur Expression von Bone Morphogenetic Protein-2 (BMP-2), Vascular Endothelial Growth Factor (VEGF) und seinen Rezeptor-Isoformen VEGF-Rezeptor 1 und VEGF-Rezeptor 2, sowie den NOS-Isoformen eNOS und iNOS zeigen alle eine signifikant vermehrte Expression in der Konditionierung mit Bio-Oss® als KEM und einer resorbierbaren Bio-Gide® Membran. Lediglich die Expression des von-Willebrand-Faktors (vWF) als Marker des Endothels zeigte keine signifikant vermehrte Expression in der mit Bio-Oss® und Bio-Gide® modifizierten Gruppe. Hier wäre die Tatsache, dass der vWF auch als Marker der endothelialen Dysfunktion beschrieben wird und in den klinisch stärker atrophierten Modifikation vermehrt exprimiert wird, eine Erklärungsmöglichkeit. Die Untersuchungen zur Expression der Vaskularisationsmarker hinsichtlich der Regionen im Augmentat zeigen sowohl bei BMP-2 wie auch bei VEGF und seinen Rezeptorisoformen VEGF-R1 und VEGF-R2 eine signifikant vermehrte Expression im Bereich des Transplantates in der Bio-Oss® Modifikation. Diese Ergebnisse stützen den klinischen Aspekt der guten Vaskularisierung des Transplantates und unterstreichen die Bedeutung der Wachstumsfaktoren für die Vaskularisierung im Transplantat. Bei den Färbungen auf NOS findet sich eine signifikant vermehrte Expression im Transplantatlager. Diese Ergebnisse stellen die Bedeutung von NOS für die Regulation der Osteogenese und die direkten Wirkungen auf Osteoblasten und Osteoklasten. Die Tatsache, dass gerade in der Bio-Oss® Modifikation, in der klinisch die geringste Resorption zu beobachten war, signifikant mehr Vaskularisationsmarker exprimiert wurden, ist Nachweis der besseren Vaskularisation dieser Konditionierung und unterstreicht sowohl den Nutzen von KEM wie Bio-Oss® bei Transplantationen autologen Knochens, wie auch die Möglichkeiten der therapeutischen Verwendung einzelner Wachstumsfaktoren wie z. B. BMP-2. N2 - In this study the expression of various markers for vascularization in different modifications of alveolar ridge augmentation procedures on the mandible with autogenous bone grafts from the iliac crest was analyzed with the help of an in-vivo sheep model. As preliminary investigations suggested, especially the modification of the host side as a combination of a resorbable Bio-Gide® membrane according to the concept of Guided Bone Regeneration (GBR) with Bio-Oss® as a bovine bone substitute, showed the least resorption in clinical findings. This modification of the host side was compared with a control group, in which other modifications of the host side were being used and which showed a way higher rate of resorption during the surveillance period and until the euthanasia of the sheep after 16 weeks. The expression of different vascularization markers was compared between these two groups. The data concerning the expression of Bone Morphogenetic Protein-2 (BMP-2), Vascular Endothelial Growth Factor (VEGF) and its receptor-isoforms VEGF-Receptor 1 and VEGF-Receptor 2, as well as the Nitric Oxide Synthase (NOS) isoforms, the endothelial NOS (eNOS) and the inducible NOS (iNOS) all showed a significantly higher expression within the modification of the host side using GBR and Bio-Oss®. Only the expression of the von-Willebrand-Factor (vWF) as a marker of the endothelium showed no significantly higher expression within this modification but a higher expression within the control group. Hypothetically, the fact that vWF is also a marker of endothelial dysfunction could explain the higher expression within the control group. Taking the different regions of the graft in consideration, BMP-2, VEGF, VEGFR-1 and VEGFR-2 all showed a significantly higher expression within the bone graft of the modification using GBR and Bio-Oss®. These results underline the clinical aspect of the good vascularization of the graft within this modification. NOS showed a significantly higher expression in the region of the host side and could explain the importance of NOS for osteogenesis and its effect on osteoblasts and osteoclasts. In summary, the significantly higher expression of vascularization markers and clincally the lowest rate of atrophy and resorption within the modification of the host side using GBR and Bio-Oss®, underlines the better vascularization of this modification and emphasizes the use of GBR and bone substitues during the transplantation of autogenous bone grafts and suggests the therapeutical use of certain growth factors such as BMP-2 within this modification. KW - Unterkiefer KW - Transplantat KW - Immuncytochemie KW - Knochenzement KW - Knochen-Morphogenese-Proteine KW - Augmentation KW - Vascular endothelial Growth Factor KW - Knochenersatzmaterial KW - VEGF-Rezeptor 1 KW - VEGF-Rezeptor 2 KW - eNOS KW - iNOS KW - alveolar crest augmentation KW - autgenous bone graft KW - immunhistchemistry KW - bovine bone substitute KW - mandible Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69798 ER - TY - THES A1 - Renner, Tobias T1 - In vitro Testverfahren zur Qualifizierung von Knochenklebstoffen T1 - In vitro testing methods for the qualification of bone glues N2 - Knochenklebstoffe, welche eine unkonventionelle Möglichkeit im Bereich der chirurgischen Frakturversorgung darstellen, müssen bereits in vitro eine Reihe an klinischen Anforderungen erfüllen. Hinsichtlich entsprechender Prüfverfahren wurde noch keine Normierungsarbeit geleistet, weswegen Ergebnisse verschiedener Arbeiten schwierig vergleichbar sind. Ziel der Arbeit war es daher Prüfverfahren vorzustellen, welche die Besonderheiten des „Werkstoffes Knochen“ berücksichtigen. In diesem Rahmen werden zwei neuartigen Klebstoffsysteme, ein in situ härtender Knochenzement aus Trimagnesiumphosphat, Magnesiumoxid und organischer Phytinsäure und ein lichthärtender Knochenklebstoff aus Polyethylenglycoldimethacrylat, NCO-sP(EO-stat-PO), Campherchinon und anorganischen Newberyit-Füllern, vorgestellt. Neben diesen sind drei kommerziell erhältliche Klebstoffe Gegenstand der Untersuchung. Dies sind zum einen Histoacryl® und TruGlue® Gewebekleber, zwei Klebstoffe auf Cyanoacrylat-Basis mit unterschiedlich langer Alkyl-Seitenkette, zum anderen Bioglue®, ein Gewebekleber aus Albumin und Glutaraldehyd. Bei den Klebstoffen wurde die Zug- und Scherfestigkeit unter Einfluss der physiologischen Klebstoffalterung, der Variation der Klebefugenbreite, der Variation von komplementären Fügeteilen, sowie Fügeteiloberflächen inspiziert. Makro- und mikroskopische, sowie elektronenmikroskopischen Untersuchung der Bruchflächen auf mikrostrukturelle Besonderheiten und Versagemechanismus wurden angestellt. Die neuartigen Klebstoffsysteme unterliegen zwar den konventionellen Cyanoacrylaten hinsichtlich mechanischer Parameter, weisen aber dennoch adäquate Klebefestigkeiten auf bei zugleich zahlreichen Vorteilen gegenüber konventionellen Systemen im Umgang mit Knochen. Gerade der Magnesiumphosphatzement scheint auf Grund mechanischer Parameter und Vorzügen wie der guten Biokompatibilität und biologischen Abbaubarkeit, Osteoinduktivität, Osteokonduktivität, der einfachen Applizierbarkeit, einem hohen Kosten-Nutzen-Faktor oder dem günstigen Verhalten in wässrigen Milieu vielversprechend. N2 - Bone adhesives are an alternative for surgical fracture treatment, which have to meet clinical requirements already in vitro. Concerning testing methods of bone adhesives, there is no standardization, what leads to the fact, that results of authors, who did research to this topic, are hard to compare. The aim of this research was to present testing methods, which consider the characteristics of the “material bone”. In this connection two novel bone adhesive systems are presented. These are first an in situ hardening bone cement consisting of trimagnesium phosphate, magnesium oxide and organic phytic acid and second a photocurable bone adhesive consisting of polyethylene glycol dimethacrylate, NCO-sP(EO-stat-PO), camphorquinone and a mineral ceramic newberyite-filler. Besides these two novel adhesive systems, three commercialized adhesives are examined. These are on the one hand Histoacryl® and TruGlue® tissue adhesives, two adhesives based on cyanoacrylate with a different size of the alkyl side chain, on the other hand Bioglue®, a tissue adhesive based on albumin and glutaraldehyde. In the case of these adhesives shear strength and tensile bonding strength, as well as the influence of factors like the physiological aging of the adhesive, the variation of the width of the bonded joint, the variation of the complementary adherend or the adherend surface, were investigated. Macro- and microscopic analysis as well as scanning electron microscope analysis of the area of fracture was executed to determine microstructural characteristics and the mechanism of failure. Indeed, the novel bonding systems succumb to the conventional cyanoacrylates concerning mechanical parameters, but nevertheless they exhibit adequate bonding strength for a clinical use. Additionally, they have numerous advantages when it comes to the “material bone” in contrast to conventional adhesives. Especially the magnesium phosphate cement seems to be promising due to its good biocompatibility, biological degradation, osteoinductivity, osteoconductivity, the simple application, an economic cost-benefit-ratio and its favorable performance under wet conditions. KW - bone KW - cement KW - adhesive KW - testing KW - Knochenkleber KW - bone adhesive KW - testing methods KW - bone cement KW - Knochenzement Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161546 ER -