TY - THES A1 - Urlaub, Jonas T1 - Development of analytical methods for the quality assessment of mineral oil based excipients and mechanochemically stressed active pharmaceutical ingredients T1 - Entwicklung analytischer Methoden für die Qualitätsbeurteilung mineralölbasierter Hilfsstoffe und mechanochemisch gestresster Arzneistoffe N2 - For the quality assurance of substances for pharmaceutical use, a variety of analytical techniques are available to address specific analytical problems. In this field of application, liquid chromatography (LC) stands out as the gold standard in the pharmaceutical industry. Various detectors can be employed, which are e.g. based on UV/Vis spectroscopy for the examination of molecules with a chromophore, or mass spectrometry (MS) for structural elucidation of analytes. For the separation of enantiomers, the use of capillary electrophoresis (CE) may be more favorable due to the high separation efficiency and easy-to-use and comparatively inexpensive chiral selectors, in contrast to chiral columns for LC, which are usually very expensive and limited to a restricted number of analytes. For structure elucidation in impurity profiling, one- and multidimensional 1H NMR spectroscopy is a valuable tool as long as the analyte molecule has got nuclei that can be detected, which applies for the magnitude of organic pharmaceutical substances. For the evaluation of the amount of mineral oil aromatic hydrocarbons (MOAH) in various paraffin samples from different suppliers, a straightforward method based on 1H NMR spectroscopy was elaborated. The MOAH/MOSH ratio was used to indicate the amount of MOAH of paraffins and to evaluate the extent of refining. In addition, a representative paraffin sample was measured without sample solvent at high temperatures (about 340 K) to avoid the interfering residual solvent signals in the spectral regions of interest. The results of both methods were in good accordance. Moreover, the 1H NMR results were complemented with the UV measurements from the purity testing of paraffins according to the DAB 8. Correlations of the NMR and UV spectroscopic data indicated a linear relationship of both methods for the determination of MOAH in paraffins. Finally, the 1H NMR data was evaluated by principal component analysis (PCA) to explore differences within the paraffin samples and the spectral regions in the 1H NMR spectrum which are responsible for the formation of groups. It could be found that most variation is due to the MOSH of the paraffins. The PCA model was capable of differentiating between soft, liquid and solid paraffins on the one hand and between natural and synthetic liquid paraffins on the other hand. The impurity profiling of L-ascorbic acid 2-phosphate magnesium (A2PMg) was performed by means of one- and two-dimensional NMR spectroscopy. Several ethylated impurities could be detected, which were likely to be formed during synthesis of A2PMg. The structures of two of the ethylated impurities were identified as ascorbic acid 2-phosphate ethyl ester and ethanol, (residual solvent from synthesis). NMR spectroscopic studies of the fractions obtained from preparative HPLC of A2PMg revealed two additional impurities, which were identified as phosphorylated derivatives of ascorbic acid, ascorbic acid 3,5-phosphate and ascorbic acid 5-phosphate. Solid state mechanochemistry as an alternative approach for stress testing was applied on the drug substances S-Ibuprofen (Ibu) and Clopidogrel (CLP) using a ball mill, in order to study their degradation profile: First, the isomerization of S-Ibu was investigated, which was stressed in the solid state applying several milling frequencies and durations under basic, acidic and neutral conditions. For the separation of Ibu enantiomers, a chiral CE method was developed and validated according to ICH Q2(R1). It was found that S-Ibu is overall very stable to isomerization; it shows minor conversion into the R-enantiomer under basic environment applying long milling times and high frequencies. Last, the degradation profile of clopidogrel hydrogen sulfate (CLP) was investigated, which was stressed in the solid state under various oxidative conditions. An already existing HPLC-UV method was adjusted to sufficiently separate the degradation products, which were characterized by means of UV and MS/(MS) detection. Most of the degradation products identified were already reported to result from conventional CLP stress tests. The degradation profile of CLP was mainly influenced by the material of the milling jar and the type of catalyst used. N2 - Für die Qualitätssicherung von Arznei- und Hilfsstoffen steht eine Vielzahl von analytischen Techniken für spezifische analytische Fragestellungen zur Verfügung. In der pharmazeutischen Industrie hat sich dabei die Flüssigkeitschromatographie als Goldstandard etabliert. Es können verschiedene Detektoren eingesetzt werden, die z. B. auf UV/Vis-Spektroskopie zur Untersuchung von Molekülen mit einem Chromophor oder auf Massenspektrometrie zur Strukturaufklärung von Analyten basieren. Für die Trennung von Enantiomeren kann die Verwendung von Kapillarelektrophorese aufgrund der hohen Trenneffizienz und der einfach zu handhabenden und vergleichsweise preiswerten chiralen Selektoren gegenüber chiralen Säulen in der Flüssigchromatographie bevorzugt sein, die in der Regel sehr teuer und auf eine begrenzte Anzahl von Analyten beschränkt sind. Für die Strukturaufklärung im Rahmen der Erstellung von Verunreinigungsprofilen ist die ein- und mehrdimensionale 1H-NMR-Spektroskopie eine sehr wertvolle Methode, solange das Analytmolekül Kerne besitzt, die der NMR-Spektroskopie zugänglich sind, was für den Großteil der organischen Arznei- und Hilfsstoffe zutrifft. Um die Menge an „mineral oil aromatic hydrocarbons (MOAH)“ in verschiedenen Paraffinproben von unterschiedlichen Herstellern zu bestimmen, wurde eine einfache 1H-NMR-Spektroskopie-Methode erarbeitet. Das Verhältnis von MOAH zu „mineral oil saturated hydrocarbons (MOSH)“ wurde dazu verwendet, um die Menge der MOAH in Paraffinen zu bestimmen und ihren Raffinationsgrad zu beurteilen. Zusätzlich wurde eine repräsentative Paraffinprobe ohne Probenlösungsmittel bei hohen Temperaturen (ca. 340 K) vermessen, um die interferierenden Restlösemittel Signale in den relevanten Spektralbereichen zu vermeiden. Die Ergebnisse beider Methoden stimmten gut überein. Weiterhin wurden die 1H-NMR-Ergebnisse durch die UV-Messungen aus der Reinheitsprüfung von Paraffinen gemäß DAB 8 ergänzt. Korrelationen der NMR- und UV-spektroskopischen Daten wiesen auf eine lineare Beziehung beider Methoden für die Bestimmung der MOAH in Paraffinen hin. Schließlich wurden die 1H-NMR-spektroskopischen Daten mittels Hauptkomponentenanalyse ausgewertet, um Unterschiede innerhalb der Paraffinproben und die für die Gruppenbildung verantwortlichen Spektralbereiche im 1H-NMR-Spektrum zu ermitteln. Es konnte festgestellt werden, dass der Hauptanteil der Varianz auf die MOSH zurückzuführen ist. Das PCA-Modell war dazu in der Lage, zwischen weichen, flüssigen und festen Paraffinen einerseits und zwischen natürlichen und synthetischen flüssigen Paraffinen andererseits zu unterscheiden. Das Verunreinigungsprofil von L-Ascorbinsäure-2-phosphat-Magnesium (A2PMg) wurde mittels ein- und zweidimensionaler NMR-Spektroskopie untersucht. Es konnten mehrere ethylierte Verunreinigungen nachgewiesen werden, die vermutlich während des Syntheseprozesses von A2PMg gebildet wurden. Die Strukturen von zwei der ethylierten Verunreinigungen wurden als Ascorbinsäure-2-phosphat ethylester und Ethanol (Restlösungsmittel aus der Synthese) identifiziert. NMR spektroskopische Untersuchungen der aus der präparativen HPLC von A2PMg erhaltenen Fraktionen ergab zwei weitere Verunreinigungen, die als phosphorylierte Derivate von Ascorbinsäure, Ascorbinsäure-3,5-phosphat und Ascorbinsäure-5-phosphat, identifiziert wurden. Die Festkörper-Mechanochemie als alternativer Ansatz für Stresstests wurde auf die Arzneistoffe S-Ibuprofen und Clopidogrel unter Einsatz einer Kugelmühle angewandt, um deren Abbauprofil zu analysieren: Zunächst wurde die Isomerisierung von S-Ibuprofen (Ibu) untersucht, das im festen Zustand unter Anwendung verschiedener Mahlfrequenzen und -dauern unter basischen, sauren und neutralen Bedingungen gestresst wurde. Für die Trennung der Ibu-Enantiomere wurde eine chirale Kapillarelektrophorese-Methode entwickelt und gemäß ICH Q2(R1) Leitlinie validiert. Es wurde festgestellt, dass S-Ibu insgesamt sehr stabil gegenüber Isomerisierung ist, jedoch unter basischen Bedingungen und hohen Mahldauern und -frequenzen eine geringe Umwandlung in das R-Enantiomer zeigt. Zuletzt wurde das Abbauprofil von Clopidogrelhydrogensulfat (CLP) untersucht, das im festen Zustand unter oxidativen Bedingungen gestresst wurde. Eine bereits bestehende HPLC-UV Methode wurde optimiert, um die Abbauprodukte ausreichend zu trennen und anschließend mittels UV- und MS/(MS)-Detektion zu charakterisieren. Die meisten der identifizierten Abbauprodukte waren bereits aus konventionellen CLP-Stresstests bekannt. Das Abbauprofil von CLP wurde hauptsächlich durch das Material der Kugelmühle und den Typ des verwendeten Katalysators beeinflusst. KW - HPLC KW - Kapillarelektrophorese KW - NMR-Spektroskopie KW - Paraffin KW - Verunreinigung KW - NMR spectroscopy KW - capillary electrophoresis KW - liquid chromatography KW - paraffins KW - mechanochemical degradation KW - impurities Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-243465 ER - TY - THES A1 - Jakob-Rodamer, Verena T1 - Development and validation of LC-MS/MS methods to determine PK/PD parameters of anti-infectives T1 - Entwicklung und Validierung von LC-MS/MS Methoden zur Bestimmung von PK/PD-Parametern von Antiinfektiva N2 - In the present thesis the development and validation of bioanalytical LC-MS/MS methods for the quantification of erythromycin A, erythromycin ethylsuccinate, roxithromycin, clarithromycin, 14 hydroxy clarithromycin, flucloxacillin, piperacillin and moxifloxacin in human plasma and human urine (piperacillin) is introduced. All methods were applied to analyze human plasma and urine samples from clinical trials and therefore, have been validated according to international guidelines. The methods were reliable in these studies and fulfilled all regulatory requirements known at the time of the study conduct. Moreover, the validation data of the macrolides were compared on three different mass spectrometers (API III Plus, API 3000™, API 5000™). The new innovations in the ion source (horizontal versus vertical electrospray), the ionpath (skimmer, QJet) and the diameter of the orifice resulted in better sensitivity and a larger linearity range for the majority of the analytes. Sensitivity was improved up to a factor of 12 (for clarithromycin) between API III Plus to API 3000™ and up to a factor of 8 (for erythromycin and roxithromycin) between API 3000™ and API 5000™, keeping the accuracy and precision data at about the same level. The high sensitivity was a benefit for example for the flucloxacillin study, because concentrations from all subject samples were detectable up to approximately eight half-lives, i.e. no concentrations needed to be reported below the quantification limit. Also the linearity range were extended from two orders of magnitude to up to four orders of magnitude, which increases the likelihood to allow to analyze all samples from a pharmacokinetic study in the same run. This is especially useful if a large concentration range needs to be analysed, for example, if the method shall be applied in an ascending dose study. Then, all low concentrations from the beginning of the study can be determined, as well as all high concentrations, without the need to dilute and analyse single samples repeatedly. The pharmacokinetic data were compared to previously reported literature data and correlated graphically with MIC values of popular microorganisms which might be a starting point for further PK/PD investigations. The PK/PD theory is a very helpful tool for prediction of the efficacy of given drugs against certain micro-organisms. Depending on the pharmacodynamic processes, e. g. the mode of action, three classes of drugs have been identified. In the same way this applies to adverse effects, which need to be minimised by reducing plasma concentrations. These coherences are not well-investigated, yet, and are not discussed further in this thesis. Still, a lot of research has to be done in this interdisciplinary field to minimise uncertainty in single values, like an AUC/MIC. These include: Improve accuracy and precision of bioanalytical methods determining total and free concentration data in biological matrices for calculation of AUC and Cmax These parameters are related to the MIC in pharmacodynamic considerations. Since the determination of the MIC often underlies significant variations and also differences between microbiological laboratories, the determination of concentrations of anti-infectives is particular important, being achievable by scientific exact techniques. Finally, from the volume of distribution of antibiotics can be used to derive information about intracellular concentrations and effectivity of antiinfectives. N2 - In der vorliegenden Arbeit wird die Entwicklung und Validierung von bioanalytischen LC-MS/MS-Methoden zur Quantifizierung von Erythromycin A, Erythromycin-ethylsuccinat, Roxithromycin, Clarithromycin, 14 Hydroxy-clarithromycin, Flucloxacillin, Piperacillin und Moxifloxacin in Humanplasma und Humanurin (Piperacillin) vorgestellt. Alle Methoden wurden für die Analyse von Plasma- und Urinproben aus klinischen Studien beim Menschen eingesetzt und deshalb nach international anerkannten Richtlinien validiert. In diesen Studien haben sich die Methoden bewährt und alle Anforderungen der zum Zeitpunkt der Studie bekannten behördlichen Ansprüche erfüllt. Die Validierungsdaten der Makrolid-Methoden konnten zudem an drei Massenspektrometern der selben Baureihe verglichen werden. Dabei zeigte sich, dass die Neuerungen an der Ionenquelle (horizontale versus vertikale ESI), dem Ionenpfad (Skimmer, QJet), sowie das immer größere Orifice in der Baureihe, nicht nur stetig verbesserte Sensitivität ermöglichen, sondern auch immer größere Linearitätsbereiche. So konnte ein Sensitivitätsgewinn bis zu Faktor 12 (Clarithromycin) von API III Plus auf API 3000™ und bis zu Faktor 8 (Erythromycin und Roxithromycin) von API 3000™ auf API 5000™ bei etwa gleichen Werten für die Präzision erreicht werden. Die hohe Sensitivität zeigte sich zum Beispiel bei der Flucloxacillin Studie von Vorteil, da alle Konzentrationen bis circa acht Halbwertszeiten nach Wirkstoffgabe bestimmt werden konnten, ohne dass einzelne Proben als „BLOQ“ (unter dem Quantifizierungslimit) berichtet werden mussten. Während früher noch Linearitätsbereiche um zwei Größenordnungen üblich waren, sind jetzt am API 5000™ Konzentrationsbereiche über bis zu vier Größenordnungen reproduzierbar linear. Das ist insbesondere von Nutzen, wenn bei einer Substanz ein größerer Konzentrationsbereich gemessen werden muss. Das ist beispielsweise dann der Fall, wenn die Methode für eine Dosissteigerungsstudie eingesetzt werden soll. Dann können sowohl alle kleinen Konzentrationen zu Beginn der Studie gemessen werden, als auch alle hohen Konzentrationen zum Ende der Studie, und zwar ohne, dass einzelne Proben gesondert verdünnt und wiederholt gemessen werden müssen. Die pharmakokinetischen Daten der Antibiotika wurden in den Kontext mit Literaturdaten gestellt und graphisch mit MHK-Werten für gängige Mikroorganismen verglichen, was den Ausgangspunkt für spätere PK/PD-Untersuchungen darstellt. Für die Vorhersage der Wirksamkeit einer verabreichten Substanz gegenüber bestimmten Mikroorganismen ist die PK/PD-Korrelation ein gutes Hilfsmittel. Anhand der pharmakodynamischen Parameter, wie der Wirkungsweise, können drei Antibiotikaklassen gebildet werden. In analoger Weise gilt für die Nebenwirkungen, dass die Plasma-Konzentrationen verringert werden müssen. Diese Zusammenhänge sind jedoch weniger gut untersucht und werden in dieser Dissertation nicht näher diskutiert. In diesem interdisziplinären Feld ist immer noch viel Forschung nötig um beispielsweise Unsicherheiten bei einzelnen Werten wie z.B. AUC/MIC zu minimieren. Diese beinhalten: Verbesserung der Genauigkeit und Präzision von bioanalytischen Methoden welche für die Bestimmung der Gesamtkonzentration und der freien Konzentration in biologischen Matrices verwendet werden um AUC und Cmax zu bestimmen. Diese Parameter werden in pharmakodynamischen Überlegungen in Beziehung zur MHK gesetzt. Da die MHK-Bestimmung oft erheblichen Schwankungen und auch Unterschieden zwischen verschiedenen mikrobiologischen Laboratorien unterliegt, kommt der Konzentrationsbestimmung der Antibiotika besondere Bedeutung zu, weil sie mit naturwissenschaftlich exakten Methoden möglich ist. Aus den Verteilungsvolumina von Antibiotika lassen sich schließlich auch noch Informationen über die intrazelluläre Konzentration und Wirksamkeit von Antibiotika ableiten. KW - Antimikrobieller Wirkstoff KW - Pharmakokinetik KW - Pharmakodynamik KW - LC-MS KW - LC-MS/MS KW - anti-infectives KW - Antiinfektiva KW - mass spectrometry KW - liquid chromatography KW - antibiotic KW - pharmacokinetic KW - clinical study Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-109215 ER -