TY - THES A1 - Zitzler-Kunkel, André T1 - Funktionale Merocyaninfarbstoffe: Synthese, molekulare und Selbstorganisationseigenschaften sowie ihre Anwendung in der organischen Photovoltaik T1 - Functional merocyanine dyes: Synthesis, molecular and self-organization properties as well as their application in organic photovoltaics N2 - Analog zu den auf hochgeordneten Farbstoffarchitekturen in den biologischen Photosyntheseapparaten basierenden Energiekonversionssystemen sollte die exakte Einstellung zwischenmolekularer Wechselwirkungen auch in künstlichen Halbleitern eine entscheidende Rolle für die Weiterentwicklung organischer Elektronikmaterialien spielen. Für eine derartige, präzise Steuerung der nanoskaligen Anordnung in organischen Materialien erscheinen Merocyaninfarbstoffe wegen ihrer hochgerichteten, dipolaren Aggregation äußerst aussichtsreich. In diesem Zusammenhang war das Ziel der vorliegenden Arbeit die Ausnutzung funktionaler, stark selbstorganisierender Merocyanine, um eine gezielte Beeinflussung der Morphologie in der aktiven Schicht von BHJ-Solarzellen zu erreichen. Hierzu sollte zunächst eine umfangreiche Serie komplexer Merocyanine synthetisiert und vollständig charakterisiert werden. Im Folgenden wurde angestrebt, die optischen und elektrochemischen Eigenschaften der molekular gelösten Farbstoffe zu bestimmen und für ausgewählte, geeignete Strukturen das Selbstorganisationsverhalten im Detail zu studieren. Zuletzt sollte durch eine sorgfältige Optimierung der Prozessierungsbedingungen ein Transfer der in Lösung gefundenen, supramolekularen Strukturen in den Blend lösungsprozessierter BHJ-Solarzellen erreicht werden. Die organischen Elektronikbauteile wurden dabei im Arbeitskreis von Prof. Dr. Klaus Meerholz (Universität Köln) gefertigt und charakterisiert. Zusammenfassend zeichnet die vorliegende Arbeit ein umfassendes Bild von der Synthese funktionaler Merocyanine, dem Studium ihrer molekularen und Selbstorganisationseigenschaften sowie ihrer Anwendung als p-Halbleitermaterialien in organischen Solarzellen. Der komplexe Molekülaufbau der dargestellten Farbstoffe führte dabei zur Ausbildung verschiedener Farbstofforganisate, deren Struktur sowohl in Lösung als auch teilweise im Festkörper aufgeklärt werden konnte. Die erfolgreiche Implementierung von H-aggregierten Spezies der Verbindung 67b in die aktive Schicht organischer BHJ-Solarzellen resultierte in der Bildung effizienter Perkolationspfade für Exzitonen und freie Ladungsträger, wodurch diese Bauteile merklich höhere Stromdichten generieren konnten und gegenüber Zellen ohne H-Spezies über 20 % gesteigerte Effizienz aufwiesen. Diese Befunde verifizieren die postulierte Hypothese, dass eine gezielte Einstellung der zwischenmolekularen Wechselwirkungen bei organischen Halbleitern zu einer Optimierung der Funktionalität organischer Elektronikmaterialien beitragen kann. N2 - Similar to the highly ordered dye assemblies in biological photosynthetic energy conversion systems, the exact setting of noncovalent interactions in artificial semiconductor materials could also be of crucial importance for further advancements of organic electronic materials. For such a precise control of the nanoscale arrangement in organic materials, merocyanine dyes appear extremely promising due to their highly directional, dipolar aggregation. In this context, the objective of this work was the use of functional, intensely self-organizing merocyanine dyes to specifically influence the active layer morphology of BHJ solar cells. For this purpose, first of all a comprehensive series of complex merocyanine dyes should be synthesized and fully characterized. In the following, the optical and electrochemical properties of the molecularly dissolved dyes should be determined and the aggregation behavior of selected suitable structures should be in-depth analyzed. Finally, a transfer of the supramolecular structures formed in solution into the blend of solution-processed BHJ solar cells should be accomplished by careful optimization of the processing conditions. In the course of this, the organic solar cell devices were fabricated and characterized in the group of Prof. Dr. Klaus Meerholz (University of Cologne). In summary, the present thesis draws a comprehensive picture of the synthesis of functional merocyanine dyes, the detailed study of their molecular and self-organization properties as well as their application as p-type semiconductor materials in organic photovoltaics. The complex nature of the synthesized dyes led to the formation of various dye assemblies, whose structure could be elucidated in solution as well as partially in the solid state. The successful implementation of H-aggregated species in the active layer of organic BHJ solar cells resulted in the creation of efficient percolation paths for excitons and charge carriers, whereby such devices generated remarkably higher current densities and revealed more than 20 % higher efficiencies compared to cells without H-species. Based on this finding, the initially postulated hypothesis that an exact setting of intermolecular interactions in organic semiconductors can help to optimize the functionality of organic electronic materials, indeed could be verified. KW - Merocyanine KW - Merocyaninfarbstoffe KW - merocyanine dyes KW - Organische Photovoltaik KW - organic photovoltaics KW - Fotovoltaik KW - Organische Chemie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101536 ER - TY - JOUR A1 - Wortmann-Saleh, D. A1 - Engels, Bernd A1 - Peyerimhoff, S. D. T1 - Theoretical Study of the Reaction O(\(^3\)P) + C\(_2\)H\(_4\) and comparison with the \(^3\)CH\(_3\) + C\(_2\)H\(_4\) Reaction N2 - The minimum energy path for the reaction O(\(^3\)P\(_g\)) + C\(_2\)H\(_4\)(\(^1\)A\(_g\)) has been calculated by optimizing all relevant geometrical parameters along the approach of oxygen to ethene. A barrier of 4.7 kcal/mol in the \(^3\)A"( ... 9a'\(^2\)- 10a'3a") potential energy surface and an energy difference of 14.4 kcal/mol between the product and the fragments is found at the multireference-configuration interaction level. The corresponding values at the lower-level treatment CASSCF are 9 kcal/mol for the barrier and 9 kcal/mol for the depth of the potential; this shows the importance of inclusion of electron correlation. The barrier for CH\(_2\) rotation for the lowestenergy structure (asymmetric OC\(_2\)H\(_4\)) is around 5 kcal/mol. The energy gap to the first excited state \(^3\)A'( ... 9a'l0a'3a'12) is found tobe 3.6 kcal/mol in MRD-CI calculations at the ground-state minimum. Comparison with \(^3\)CH\(_2\) + C\(_2\)H\(_4\) shows that in this system the lowest-energy surface is \(^3\)A', i.e., the state which is the excited state in 0 + C\(_2\)H\(_4\). This difference in energy ordering of \(^3\)A' and \(^3\)A" states results from the fact that the p\(_x\), p\(_y\), p\(_z\) degeneracy of oxygen orbitals is lifted in \(^3\)CH\(_2\)leading to b\(_1\), b\(_2\). and a\(_1\) MOs whereby the lowest b\(_2\) (a") remains doubly occupied; as a consequence, the reaction pattem between the oxygen and \(^3\)CH\(_2\) approach is different, which is also quite apparent in the calculated charge transfer. KW - Organische Chemie Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-59076 ER - TY - THES A1 - Wehner, Marius T1 - Supramolecular Polymorphism in Homo- and Heterochiral Supramolecular Polymerizations T1 - Supramolekularer Polymorphismus in homo- und heterochiralen supramolekularen Polymerisationen N2 - The aim of the first part of this thesis was to investigate (R,R)-PBI as a model system for polymorphism at its origin by a supramolecular approach. The pathway complexity of (R,R)-PBI was fine-tuned by experimental parameters such as solvent, temperature and concentration to make several supramolecular polymorphs accessible. Mechanistic and quantum chemical studies on the kinetics and thermodynamics of the supramolecular polymerization of (R,R)-PBI were conducted to shed light on the initial stages of polymorphism. The second part of this work deals with mechanistic investigations on the supramolecular polymerization of the racemic mixture of (R,R)- and (S,S)-PBI with regard to homochiral and heterochiral aggregation leading to conglomerates and a racemic supramolecular polymer, respectively. N2 - Das Ziel des ersten Teils der Dissertation war es, anhand des Modellsystems (R,R)-PBI Polymorphismus mit Hilfe eines supramolekularen Ansatzes an dessen Ursprung zu untersuchen. Durch die Wahl geeigneter experimenteller Parameter wie Lösungsmittel, Temperatur und Konzentration wurden die komplexen Polymerisationspfade von (R,R)-PBI gezielt beeinflusst und verschiedene supramolekulare Polymorphe zugänglich gemacht. Mechanistische und quantenchemische Untersuchungen der Kinetik und Thermodynamik der supramolekularen Polymerisation von (R,R)-PBI wurden durchgeführt, um die Anfangsphase des Polymorphismus zu beleuchten. Der zweite Teil der vorliegenden Arbeit befasst sich mit mechanistischen Untersuchungen der supramolekularen Polymerisation der racemischen Mischung aus (R,R)- und (S,S)-PBI im Hinblick auf homo- und heterochirale Aggregation, welche zu Konglomeraten beziehungsweise einem racemischen supramolekularen Polymer führte. KW - Supramolekulare Chemie KW - Polymorphismus KW - Konglomerat KW - Aggregat KW - Organische Chemie KW - Aggregation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211519 ER - TY - THES A1 - Wagner, Wolfgang T1 - Supramolecular Block Copolymers by Seeded Living Supramolecular Polymerization of Perylene Bisimides T1 - Supramolekulare Blockcopolymere von Perylenbisimiden mittels saat-induzierter lebender supramolekularer Polymerisation N2 - The research on supramolecular polymerization has undergone a rapid development in the last two decades, particularly since supramolecular polymers exhibit a broad variety of functionalities and applications in organic electronics, biological science or as functional materials (Chapter 2.1). Although former studies have focused on investigation of the thermodynamics of supramolecular polymerization (Chapter 2.2), the academic interest in the recent years shifted towards gaining insight into kinetically controlled self-assembly and pathway complexity to generate novel out-of-equilibrium architectures with interesting nanostructures and features (Chapter 2.3). Along this path, the concepts of seeded and living supramolecular polymerization were recently developed to enable the formation of supramolecular polymers with controlled length and low polydispersity under precise kinetic control (Chapter 2.4). Besides that, novel strategies were developed to achieve supramolecular copolymerization resulting in complex multicomponent nanostructures with different structural motives. The classification of these supramolecular copolymers on the basis of literature examples and an overview of previously reported principles to create such supramolecular architectures are provided in Chapter 2.5. The aim of the thesis was the non-covalent synthesis of highly desirable supramolecular block copolymers by the approach of living seeded supramolecular polymerization and to study the impact of the molecular shape of the monomeric building blocks on the supramolecular copolymerization. Based on the structure of the previously investigated PBI organogelator H-PBI a series of novel PBIs, bearing identical hydrogen-bonding amide side-groups in imide-position and various kind or number of substituents in bay-position, was synthesized and analyzed within this thesis. The new PBIs were successfully obtained in three steps starting from the respective bromo-substituted perylene-3,4:9,10-tetracarboxylic acid tetrabutylesters or from the N,N’-dicyclohexyl-1,7-dibromoperylene-3,4:9,10-tetracarboxylic acid bisimide. All target compounds were obtained in the final step by imidization reactions of the respective perylene tetracarboxylic acid bisanhydride precursors with N-(2-aminoethyl)-3,4,5-tris(dodecyloxy)-benzamide and were fully characterized by 1H and 13C NMR spectroscopy as well as high resolution mass spectrometry. The variation of bay-substituents strongly changes the optical properties of the monomeric PBIs which were investigated by UV/vis and fluorescence spectroscopy. The increase of the number of the methoxy-substituents provokes, for example, a red-shift of the absorption maxima concomitant with a decrease of extinction coefficients and leads to a drastic increase of the fluorescence quantum yields. Furthermore, the molecular geometry of the PBIs is also affected by variations of the bay-substituents. Thus, increasing the steric demand of the bay-substituents leads to an enlargement of the twist angles of the PBI cores as revealed by DFT calculations. Especially the 1,7-dimethoxy bay-substituted MeO-PBI proved to be very well-suited for the studies envisioned within this thesis. The self-assembly of this PBI derivative was analyzed in detail by UV/vis, fluorescence and FT-IR spectroscopy as well as atomic force microscopy (Chapter 3). These studies revealed that MeO-PBI forms in a solvent mixture of methylcyclohexane and toluene (2:1, v/v) kinetically trapped off-pathway H-aggregated nanoparticles upon fast cooling of a monomeric solution from 90 to 20 °C. However, upon slow cooling of the monomer solution fluorescent J-type nanofibers are formed by π π interactions and intermolecular hydrogen-bonding. The kinetically metastable off-pathway H-aggregates can be transformed into the thermodynamically more favored J-type aggregates by addition of seeds, which are produced by ultrasonication of the polymeric nanofibers. Interestingly, the living character of this seed-induced supramolecular polymerization process was proven by a newly designed multicycle polymerization experimental protocol. This living polymerization experiment clearly proves, that the polymerization can only occur at the “active” ends of the polymeric seed and that almost no recombination or chain termination processes are present. Hence, the approach of living supramolecular polymerization enables the formation of supramolecular polymers with controlled length and narrow polydispersity. In Chapter 4 the copolymerization of MeO-PBI with the structurally similar 1,7-dichloro (Cl-PBI) and 1,7-dimethylthio (MeS-PBI) bay-substituted PBIs is studied in detail. Both PBIs form analogous to MeO-PBI kinetically trapped off-pathway aggregates, which can be converted into the thermodynamically stable supramolecular polymers by seed-induced living supramolecular polymerization under precise kinetic control. However, the stability of the kinetically trapped aggregates of Cl-PBI and MeS-PBI is distinctly reduced compared to that of MeO-PBI, because the π-π-interactions of the kinetically metastable aggregates are hampered through the increased twisting of the PBI-cores of the former PBIs. UV/vis studies revealed that the two-component seeded copolymerization of the kinetically trapped state of MeO-PBI with seeds of Cl-PBI leads to the formation of unprecedented supramolecular block copolymers with A-B-A pattern by a living supramolecular polymerization process at the termini of the seeds. Remarkably, the resulting A-B-A block pattern of the obtained copolymers was clearly confirmed by atomic force microscopy studies as the respective blocks formed by the individual monomeric units could be distinguished by the pitches of the helical nanofibers. Moreover, detailed UV/vis and AFM studies have shown that by inverted two-component seed-induced polymerization, e.g., upon addition of seeds of MeO-PBI to the kinetically trapped aggregates of Cl-PBI, triblock supramolecular copolymers with B-A-B pattern can be generated. The switching of the block pattern could only be achieved because of the perfectly matching conditions for the copolymerization process and the tailored molecular geometry of the individual building blocks of both PBIs. These studies have demonstrated for the first time, that the block pattern of a supramolecular copolymer can be modulated by the experimental protocol through the approach of living supramolecular polymerization. Furthermore, by UV/vis analysis of the living copolymerization of MeO-PBI and MeS-PBI similar results were obtained showing also the formation of both A-B-A and B-A-B type supramolecular block copolymers. Although for these two PBIs the individual blocks could not be identified by AFM because the helical nanofibers of both PBIs exhibit identical helical pitches, these studies revealed for the first time that the approach of seeded living polymerization is not limited to a special pair of monomeric building blocks. In the last part of the thesis (Chapter 5) a systematic study on the two-component living copolymerization of PBIs with various sterical demanding bay-substituents is provided. Thus, a series of PBIs containing identical hydrogen-bonding amide groups in imide position but variable number (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) or size (EtO-PBI, iPrO-PBI) of alkoxy bay-substituents was investigated. The molecular geometry of the monomeric building blocks has a strong impact on the thermodynamically and even more pronounced on the kinetically controlled aggregation in solvent mixtures of MCH and Tol. While the mono- and dialkoxy-substituted PBIs form kinetically metastable species, the self-assembly of the tri- and tetramethoxy-substituted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) is completely thermodynamically controlled. The two 1,7-alkoxy substituted PBIs (EtO-PBI, iPrO-PBI) form very similar to MeO-PBI kinetically off-pathway H-aggregates and thermodynamically more favored J-type aggregates. However, the stability of the kinetically metastable state is drastically lower and the conversion into the thermodynamically favored state much faster than for MeO-PBI. In contrast, the monomethoxy-substituted PBI derivative (1-MeO-PBI) forms a kinetically trapped species by intramolecular hydrogen-bonding of the monomers, which can be transformed into the thermodynamically favored nanofibers by seeded polymerization. Importantly, the two-component seeded copolymerization of the kinetically trapped MeO PBI with seeds of other PBIs of the present series was studied by UV/vis and AFM revealing that the formation of supramolecular block copolymers is only possible for appropriate combinations of PBI building blocks. Thus, the seeded polymerization of the trapped state of the moderately core-twisted MeO-PBI with the, according to DFT-calculations, structurally similar PBIs (EtO-PBI and iPrO-PBI) leads to the formation of A-B-A block copolymers, like in the seeded copolymerization of MeO-PBItrapped with seeds of Cl-PBI and MeS-PBI already described in Chapter 4. However, by addition of seeds of the almost planar PBIs (H-PBI and 1-MeO-PBI) or seeds of the strongly core-twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) to the kinetically trapped state of MeO-PBI no block copolymers can be obtained. The mismatching geometry of these molecular building blocks strongly hampers both the intermolecular hydrogen-bonding and the π-π-interactions between the two different PBIs and consequently prevents the copolymerization process. Furthermore, the studies of the two-component seeded copolymerization of the kinetically trapped species of 1-MeO-PBI with seeds of the other PBIs also corroborated that a precise shape complementarity is crucial to generate supramolecular block copolymers. Thus, by addition of seeds of H-PBI to the kinetically trapped monomers of 1-MeO-PBI supramolecular block copolymers were generated. Both PBIs exhibit an almost planar PBI core according to DFT-calculations leading to strong non-covalent interactions between these PBIs. This perfectly matching geometry of both PBIs also enables the inverted seeded copolymerization of the kinetically trapped monomers of H-PBI with 1-MeO-PBIseed concomitant with a switching of the block pattern of the supramolecular copolymer from A-B-A to B-A-B type. In contrast, the seeding with the moderately twisted (MeO-PBI, EtO-PBI and iPrO-PBI) and the strongly twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12 MeO-PBI) has no effect on the kinetically trapped state of 1-MeO-PBI, because the copolymerization of these PBIs is prevented by the mismatching geometry of the molecular building blocks. In conclusion, the supramolecular polymerization and two-component seeded copolymerization of a series of PBI monomers was investigated within this thesis. The studies revealed that the thermodynamically and kinetically controlled self-assembly can be strongly modified by subtle changes of the monomeric building blocks. Moreover, the results have shown that living supramolecular polymerization is an exceedingly powerful method to generate unprecedented supramolecular polymeric nanostructures with controlled block pattern and length distribution. The formation of supramolecular block copolymers can only be achieved under precise kinetic control of the polymerization process and is strongly governed by the shape complementarity already imparted in the individual components. Thus, these insightful studies might enable a more rational design of monomeric building blocks for the non-covalent synthesis of highly complex supramolecular architectures with interesting properties for possible future applications, e.g., as novel functional materials. N2 - Das Forschungsgebiet der supramolekularen Polymerisation hat sich in den letzten Jahrzehnten sehr rasch entwickelt, zumal da supramolekulare Polymere eine Fülle an Anwendungsmöglichkeiten in der organischen Elektronik, der Biologie oder als Funktionsmaterialen bieten (Kapitel 2.1). Während frühere Studien den Fokus auf die Untersuchung der Thermodynamik der supramolekularen Polymerisation gelegt haben (Kapitel 2.2), hat sich das akademische Interesse in jüngster Zeit dahingehend verschoben, Einblicke in kinetisch kontrollierte Selbstassemblierungsprozesse zu erhalten, um neuartige Strukturen mit faszinierenden Eigenschaften zu generieren (Kapitel 2.3). Im Zuge dieser Entwicklung wurde das Konzept der Saat-induzierten und der lebenden supramolekularen Polymerisation entwickelt, welche die Bildung von supramolekularen Polymeren mit geringer Polydispersität in kinetisch kontrollierten Prozessen ermöglichen (Kapitel 2.4). Des Weiteren wurden neue Strategien zu Erzeugung von Nanostrukturen entwickelt, die aus verschiedenen Komponenten aufgebaut sind und somit neue komplexe Strukturmotive zeigen. Eine Einteilung dieser supramolekularen Copolymere anhand einiger Literaturbeispiele und eine kurze Übersicht über die bisherigen Methoden, solche supramolekularen Strukturen zu erzeugen ist in Kapitel 2.5 dargestellt. Das Ziel der Doktorarbeit war die nicht-kovalente Synthese von erstrebenswerten supramolekularen Blockcopolymeren mittels lebender Saat-induzierter Polymerisation und zu erforschen, wie die molekulare Form der Monomerbausteine die supramolekulare Copolymerisation beeinflusst. Basierend auf der Molekülstruktur des zuvor untersuchten Perylenbisimidfarbstoffes H-PBI wurden in dieser Arbeit eine Reihe von neuen Perylenbisimiden mit identischen Amid-Seitengruppen in Imidposition und unterschiedlicher Art oder Anzahl von Buchtsubstituenten synthetisiert und charakterisiert. Die neuen Perylenbisimide wurden erfolgreich in drei Stufen durch neu entwickelte Syntheserouten erhalten, wobei von den jeweiligen Brom substituierten Perylen-3,4:9,10-tetracarbonsäuretetrabutylestern oder von N,N‘ Dicyclohexyl-1,7-dibromperylen-3,4:9,10-tetracarbonsäurebisimid ausgegangen wurde. Alle Zielverbindungen wurden im letzten Syntheseschritt mittels einer Imidisierungsreaktion der jeweiligen Perylenbisanhydridvorstufen mit N (2-Aminoethyl)-3,4,5-tris(dodecyloxy)benzamid erhalten und mittels 1H- und 13C NMR-Spektroskopie sowie mit hochauflösender Massenspektrometrie charakterisiert. Die Variation der Buchtsubstituenten hat einen starken Einfluss auf die optischen Eigenschaften der Perylenbisimidmonomere, was mittels UV/vis- und Fluoreszenzspektroskopie untersucht wurde. Die ansteigende Zahl der Methoxysubstituenten verursacht zum Beispiel eine Rotverschiebung der Absorptionsmaxima, welche mit einer Abnahme der Extinktionskoeffizienten einhergeht, und führt zu einem starken Anstieg der Fluoreszenzquantenausbeute. Außerdem wird auch die Molekülgeometrie der Perylenbisimide durch die Variation der Buchtsubstituenten beeinflusst. Mittels DFT-Rechnungen konnte gezeigt werden, dass eine Zunahme des sterischen Anspruchs der Buchtsubstituenten eine Vergrößerung des Torsionswinkels der Perylenbisimidkerne zur Folge hat. Als besonders geeignet für die im Rahmen dieser Arbeit anvisierten Studien erwies sich das mit zwei Methylgruppen in 1,7-Buchtposition substituierte MeO-PBI. Die Selbstassemblierung dieses 1,7-Dimethoxy-substituierten Perylenbisimid-Derivates wurde mit Hilfe von UV/vis-, Fluoreszenz- und FT-IR-Spektroskopie sowie mittels Rasterkraftmikroskopie detailliert analysiert (Kapitel 3). Diese Studien haben gezeigt, dass MeO-PBI in einem Lösungsmittelgemisch aus Methylcyclohexan und Toluol (2:1, v/v) in einem kinetisch kontrollierten Prozess durch schnelles Abkühlen der Monomerlösung von 90 auf 20 °C „off-pathway“ Nanopartikel ausbildet. Durch langsames Abkühlen der Monomerlösung entstehen hingegen fluoreszierende, J-aggregierte Nanofasern aufgrund von π-π-Wechselwirkungen und intermolekularen Wasserstoffbrückenbindungen. Die kinetisch metastabilen „off-pathway“ H-Aggregate können durch Zugabe einer polymeren J-Aggregat-Saat, welche durch eine Behandlung der polymeren Nanofasern mit Ultraschall gewonnen werden kann, in die thermodynamisch begünstigten J-Aggregate transformiert werden. Außerdem wurde der lebende Charakter dieser supramolekularen Saat-induzierten Polymerisation durch ein neu entworfenes multizyklisches Versuchsprotokoll nachgewiesen. Diese Experimente zur lebenden supramolekularen Polymerisation zeigen deutlich, dass der Polymerisationsprozess nur an den „aktiven“ Enden der polymeren Saat stattfinden kann und dass außerdem kaum Rekombinations- oder Kettenterminationsprozesse auftreten. Folglich ermöglicht die Methode der lebenden supramolekularen Polymerisation die Synthese von supramolekularen Polymeren mit kontrollierbarer Polymerlänge und geringer Polydispersität. In Kapitel 4 wird die Copolymerisation von MeO-PBI mit den strukturell ähnlichen 1,7 Dichlor- (Cl-PBI) und 1,7-Dimethylthiosubstituierten (MeS-PBI) Perylenbisimiden ausgeführt. Beide neuen Perylenbisimide bilden analog zu MeO-PBI „off-pathway“ Aggregate, die durch Saatzugabe in einem kinetisch kontrollierten Prozess in die thermodynamisch stabileren supramolekularen Polymere umgewandelt werden können. Die Stabilität der kinetisch gefangenen Aggregate von Cl-PBI und MeS-PBI ist jedoch verglichen mit den metastabilen Aggregaten von MeO-PBI deutlich geringer, da die π π Wechselwirkungen zwischen den molekularen Bausteinen aufgrund des vergrößerten Torsionswinkels der Peryleneinheiten stark reduziert sind. UV/vis-spektroskopische Studien zeigen, dass die Saat-induzierte Copolymerisation des kinetisch gefangenen Zustandes von MeO-PBI mit der Saat von Cl-PBI durch einen lebenden Kettenwachstumsprozess an den Polymerenden der Saat zur Ausbildung von neuartigen supramolekularen Blockcopolymeren mit A B A Blockstruktur führt. Die erzeugte A-B-A-Blockstruktur der erhaltenen Copolymere konnte eindeutig mittels Rasterkraftmikroskopie bestätigt werden, da die jeweiligen Polymerblöcke bestehend aus den einzelnen monomeren Einheiten anhand der Ganghöhe der helikalen Nanofasern unterschieden werden können. Ausführliche UV/vis- und Rasterkraftmikroskopiestudien haben außerdem demonstriert, dass, zum Beispiel durch Zugabe der Saat von MeO-PBI zu den kinetisch gefangenen Aggregaten von Cl PBI, Triblockcopolymere mit B-A-B-Blockstruktur in einer invertierten Saat-induzierten Zweikomponenten-Copolymerisation, erzeugt werden können. Dieser Wechsel der Blockstruktur kann nur durch perfekt abgestimmte Bedingungen für die Copolymerisation und bei übereinstimmender Molekülgeometrie der Monomereinheiten erreicht werden. Diese Studien zeigen erstmals, dass die Blockstruktur der supramolekularen Polymere durch das Versuchsprotokoll der lebenden supramolekularen Polymerisation variiert werden kann. Des Weiteren lieferten UV/vis-spektroskopische Untersuchungen der lebenden Copolymerisation von MeO-PBI und MeS-PBI ähnliche Ergebnisse, was darauf hindeutet, dass ebenfalls supramolekulare Blockcopolymere mit A-B-A- und B-A-B-Struktur gebildet werden können. Obwohl die einzelnen Polymerblöcke in diesem Fall wegen der identischen Helixganghöhe der Nanofasern nicht zugeordnet werden konnten, so zeigten diese Experimente doch, dass die Methode der Saat-induzierten lebenden Polymerisation nicht auf ein spezielles Paar von Monomerbausteinen limitiert ist. Im letzten Abschnitt der Doktorarbeit (Kapitel 5) wird eine systematische Studie der lebenden Zweikomponenten-Copolymerisation von Perylenbisimiden mit unterschiedlich sterisch anspruchsvollen Buchtsubstituenten dargestellt. Dementsprechend wurde eine Reihe von Perylenbisimiden mit identischen Amidseitenketten, aber unterschiedlicher Anzahl (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) oder Größe (EtO PBI, iPrO-PBI) der Alkoxybuchtsubstituenten untersucht. Die Molekülgeometrie der Monomereinheiten hat einen starken Einfluss auf das thermodynamisch und mehr noch auf das kinetisch kontrollierte Aggregationsverhalten in Lösungsmittelgemischen aus Methylcyclohexan und Toluol. Während die mono- und dialkoxysubstituierten Perylenbisimide kinetisch metastabile Zustände ausbilden, findet die Selbstassemblierung der tri- und tetramethoxysubstituierten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) vollständig unter thermodynamischer Kontrolle statt. Die zwei 1,7 alkoxysubstituierten Perylenbisimide (EtO-PBI, iPrO-PBI) bilden analog zu MeO PBI sowohl kinetische „off-pathway“ H-Aggregate als auch thermodynamisch begünstigte J Aggregate. Verglichen mit MeO-PBI ist jedoch die Stabilität der kinetisch metastabilen Zustände von EtO-PBI und iPrO-PBI viel geringer und die Umwandlung in die thermodynamisch stabileren Aggregate geschieht daher viel schneller. Das monomethoxysubstituierte Perylenbisimid-Derivat (1 MeO PBI) bildet im Gegensatz dazu kinetisch gefangene Monomere durch intramolekulare Wasserstoffbrücken-bindungen, welche sich durch Saat-induzierte Polymerisation in die thermodynamisch begünstigteren Nanofasern transformieren lassen. Die Saat-induzierte Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von MeO-PBI durch Saatzugabe der anderen Perylenbisimide der Reihe wurde mittels UV/vis-Spektroskopie und Rasterkraftmikroskopie analysiert. Diese Studien eröffneten, dass die Bildung von supramolekularen Blockcopolymeren nur für geometrisch passende Kombinationen der Perylenbisimide möglich ist. Dementsprechend führt die Saat-induzierte Polymerisation des kinetisch gefangenen Zustands von MeO-PBI mit den, laut DFT Rechnungen, strukturell ähnlichen Perylenbisimiden (EtO-PBI, iPrO-PBI) zur Bildung von A B A Blockcopolymeren, analog zu dem im Kapitel 4 beschriebenem Fall der Saat induzierten Copolymerisation mit Cl-PBI und MeS-PBI. Die Zugabe einer Saat der planaren Perylenbisimide (H-PBI, 1-MeO-PBI) oder der Perylenbisimide mit stark verdrehten Perylenkernen (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) zum kinetisch metastabilen Zustand von MeO-PBI führt dagegen nicht zur Bildung von Blockcopolymeren. Der Unterschied in der Molekülgeometrie dieser Monomerbausteine vermindert erheblich die Stärke der π π Wechselwirkungen zwischen den unterschiedlichen Perylenbisimiden und verhindert daher deren Copolymerisation. Die Studien zur Saat induzierten Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von 1-MeO-PBI mit den anderen Perylenbisimiden der Serie bestätigte weiterhin, dass eine genaue Übereinstimmung der molekularen Geometrie entscheidend für die Erzeugung von supramolekularen Blockcopolymeren ist. Durch Zugabe der Saat von H-PBI zum kinetisch metastabilen Zustand von 1-MeO-PBI konnten folglich supramolekulare Blockcopolymere generiert werden. Mittels DFT-Rechnungen wurde gezeigt, dass beide Perylenbisimide einen relativ planaren Perylenkern aufweisen, was zu sehr starken, nicht-kovalenten Wechselwirkungen zwischen diesen beiden Monomerbausteinen führt. Die übereinstimmende Geometrie beider Perylenbisimide ermöglicht auch die invertierte Saat-induzierte Copolymerisation des kinetisch gefangenen Zustands von H-PBI mit 1-MeO-PBISaat, was mit einem Wechsel der Blockstruktur des supramolekularen Blockcopolymers von A B A zu B A B einhergeht. Die Zugabe der Saat der mäßig (EtO-PBI, iPrO PBI) und stark verdrehten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) hat im Gegensatz dazu keinen Effekt auf den kinetisch gefangenen Zustand von 1-MeO-PBI, da die Copolymerisation dieser Perylenbisimide durch die Nichtübereinstimmung der Molekülgeometrie der Monomerbausteine verhindert wird. Abschließend lässt sich zusammenfassen, dass in dieser Arbeit die supramolekulare Polymerisation und Saat-induzierte Zweikomponenten-Copolymerisation einer Reihe von Perylenbisimidmonomeren untersucht worden ist. Die Studien haben demonstriert, dass die thermodynamisch und kinetisch kontrollierten Selbstassemblierungsprozesse durch subtile Änderungen der Monomerbausteine stark variiert werden können. Außerdem zeigen die Ergebnisse, dass die lebende supramolekulare Polymerisation eine sehr leistungsfähige Methode zur Erzeugung von neuartigen supramolekularen, polymeren Nanostrukturen mit kontrollierter Blockstruktur und Längenverteilung darstellt. Die Bildung dieser supramolekularen Blockcopolymere kann nur unter präziser kinetischer Kontrolle erreicht werden und ist durch die Komplementarität der einzelnen molekularen Komponenten stark beeinflusst. Diese aufschlussreichen Studien bilden möglicherweise die Grundlage für ein rationaleres Design neuer Monomerbausteine zur nicht-kovalenten Synthese von hochkomplexen, supramolekularen Strukturen mit potentiell einzigartigen Eigenschaften für mögliche Anwendungen, beispielsweise als neuartige Funktionsmaterialien. KW - Supramolekulare Chemie KW - Perylenbisdicarboximide KW - Lebende Polymerisation KW - Aggregation KW - Supramolecular Block Copolymers KW - Perylenbisimides KW - Kinetic Self-assembly KW - Living Polymerisation KW - Organische Chemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193004 ER - TY - JOUR A1 - Volz, H. A1 - Shin, J.-H. A1 - Prinzbach, H. A1 - Babsch, H. A1 - Christl, Manfred T1 - Stability of Tricyclo[4.1.0.0\(^{2,7}\)]heptenyl-Cations N2 - No abstract available KW - Organische Chemie Y1 - 1978 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58001 ER - TY - THES A1 - Sánchez Naya, Roberto T1 - Synthesis and Characterization of Dye-Containing Covalent Organic Frameworks T1 - Synthese und Charakterisierung von farbstoffhaltigen kovalenten organischen Netzwerken N2 - The present thesis adress the synthesis and characterization of novel COFs that contain dye molecules as integral components of the organic backbone. These chromophore-containing frameworks open new research lines in the field and call for the exploration of applications such as catalysis, sensing, or in optoelectronic devices. Initially, the fabrication of organic-inorganic composites by the growth of DPP TAPP COF around functionalized iron oxide nanoparticles is reported. By varying the ratio between inorganic nanoparticles and organic COFs, optoelectronic properties of the materials are adjusted. The document also reports the synthesis of a novel boron dipyrromethene-containing (BODIPY) COF. Synthesis, full characterization and the scope of potential applications with a focus on environmental remediation are discussed in detail. Last, a novel diketopyrrolopyrrole-containing (DPP) DPP-Py-COF based on the combination of DDP and pyrene building blocks is presented. The very low bandgap of these materials and initial investigations on the photosensitizing properties are discussed. N2 - Die Forschung an modernen porösen Materialien hat die Entwicklung von COFs als robuste, leichtgewichtige, hochgeordnete und vielseitig einsetzbare organische Materialien vorangetrieben. Der Einsatz von DCC ist entscheidend für den Aufbau hochkristalliner Netzwerke, die in der Lage sind, strukturelle Defekte selbst zu heilen (Kapitel 2.2). Für die einfache Bildung wohldefinierter Kristallite wurden verschiedene synthetische Strategien entwickelt (Kapitel 2.3). Darüber hinaus ist ein detailliertes Verständnis über die verschiedenen Reaktionen, die für die kovalente Verknüpfung organischer Bausteine eingesetzt werden (Kapitel 2.4), und der verschiedenen Topologien, die sich nach der Vernetzung ergeben (Kapitel 2.5), von grundlegender Bedeutung für die Entwicklung einer breiten Auswahl von Materialien für gezielte Anwendungen. ... KW - Organische Chemie KW - Porosität KW - Covalent Organic Framework KW - Reticular Chemistry KW - Dye KW - Porous Materials Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-288996 ER - TY - JOUR A1 - Suter, H. U. A1 - Pleß, V. A1 - Ernzerhof, M. A1 - Engels, Bernd T1 - Difficulties in the Calculation of Electron Spin Resonance Parameters using Density Functional Methods N2 - Density functional theory is applied to the calculation ofthe isotropic byperfine coupJing constants in some small molecules. Various functionals are tested. The agreement of the calculated values to experimental data and values obtained from sophisticated ab initio methods depends on the functionals used and the system under consideration. With respect to spin density calculations the functional of Lee, Yang and Parr with Becke's excbange functional (BLYP) is found to give good results for tbe heavier center of the CH and the NH molecule, while the spin densities of other molecules such as OH, H\(_2\)CN, H\(_2\)CO\(^+\), NO and O\(_2\) deviate considerably from experimental and/or other theoretical results (30%-60%). In cases where the singly occupied orbital can contribute to the isotropic hyperfine coupling constants, accurate results are obtained. The reason fortbis is analyzed. KW - Organische Chemie Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-59113 ER - TY - JOUR A1 - Suter, H. U. A1 - Huang, M.-B. A1 - Engels, Bernd T1 - A Multireference Configuration Interaction Study of the Hyperfine Structure of the Molecules CCO, CNN and NCN in their triplet ground states N2 - The hyperfine structures of the isoelectronic molecules CCO. CNN, and NCN in their triplet ground states (X\(^3 \sum ^-\)) are investigated by means of ab initio methods. The infrared frequencies and geometries are detennined and compared with experiment. Configuration selected multireference configuration interaction calculations in combination with perturbation theory to correct the wave function (MRD-CI/B\(_K\)) employing extended atomic orbital (AO) basis sets yielded very accurate hyperfine properties. The theoretical values for CCO are in excellent agreement with the experimental values determined by Smith and Weltner [J. Chem. Phys. 62,4592 (1975)]. For CNN, the first assignment of Smith and Weltner for the two nitrogen atoms has to be changed. A qualitative discussion of the electronic structure discloses no simple relation between the structure of the singly occupied orbitals and the measured hyperfine coupling constants. Vibrational effects were found to be of little importance. KW - Organische Chemie Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-59108 ER - TY - JOUR A1 - Suter, H. U. A1 - Engels, Bernd T1 - Theoretical investigation of ESR parameters: H\(_2\)CN and H\(_2\)CO\(^+\) N2 - The hyperfine structure of the two isoelectronic molecules H\(_2\)CN and H\(_2\)CO\(^+\) in their electronic ground state (X\(^2\)B\(_2\)) is studied. The influence of the atomic orbital (AO), basis sets, of the correlation treatment, and of the. equilibrium geometry on the obtained hyperfine propertles 1s - investigated. It is found that the multireference double excitation-configuration interaction (MRD-CI)/ BK treatment in which an MRD-CI wave function is corrected by a modified B\(_K\) method yields equivalent results to quadratic CI [QCISD(T)], coupled cluster single doubles [CCSD(T)), or Brueckner doubled [BD(T)]. Uncertainties in the equilibrium geometries are found to be the major source for discrepancies between theoretically and experimentally determined isotropic hyperfine coupling constants (hfccs). For the heavier centers, the calculated values of the isotropic hfccs agrees nearly perfectly with experimental values (\(\approx\) 1%-2%). The calculated values for the hydrogens are too low, but using the equilibrium structure suggested by Yamamoto and Sato [J. Chem. Phys. 96, 4157 ( 1992)], the best estimate deviates by less than 3%. KW - Organische Chemie Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-59029 ER - TY - JOUR A1 - Stangl, R. A1 - Jelinek-Fink, H. A1 - Christl, Manfred T1 - Darstellung phenylsubstituierter Derivate des Tricyclo[4.1.0.0\(^{2,7}\)]heptans und des 1,2,3,4-Tetrahydro-1,2,3-methenonaphthalins N2 - No abstract available KW - Organische Chemie KW - Bicyclo[3.2.0.02 KW - 7]heptane derivatives KW - Norcaranes KW - 7 KW - 7-dibromo KW - lH-Cyclopropa[a]naphthalenes KW - 1 KW - 1-dibromo-1a KW - 2 KW - 3 KW - 7b-tetrahydro- KW - Carbene insertion KW - Bicyclo[1.1.0]butane derivatives Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58610 ER -