TY - THES A1 - Östreicher, Sebastian T1 - Synthese und Eigenschaften neuartiger Di-, Tri- und Tetrametalloboridokomplexe T1 - Synthesis and Characterisation of Novel Di-, Tri-, and Tetrametalloborido Complexes N2 - Unter Ausnutzung der Reaktivität von Borylanionen wurden neuartige Übergangsmetallboridokomplexe synthetisiert, bei denen ein "nacktes" Boratom als Ligand für bis zu vier Übergangsmetalle vorliegt. Strukturelle und bindungstheoretische Eigenschaften der Boridokomplexe wurden mit gängigen metallorganischen Analysemethoden sowie mit DFT-Methoden untersucht. Dabei zeigte sich, dass die erhaltenen Tetrametalloboridokomplexe eine planare Koordinationsgeometrie um das Borzentrum aufweisen und damit ein Äquivalent zu anti van't Hoff/Le Bel-Verbindungen des Kohlenstoffs darstellen. N2 - Exploiting the reactivity of boryl anions, novel transition metal borido complexes were synthesised. Borido complexes feature a "naked" boron atom that serves as a ligand for up to four metals. Structucal characterisation of the boridokomplexes was carried out by means of common analytical methods as well as DFT-calculations. Tetrametalloborido complexes showed a remarkably planar geometry around the boron center and can therefore be considered as anti van't Hoff/Le Bel compounds. KW - Übergangsmetall KW - Mehrkernige Komplexe KW - Bor-Übergangsmetallverbindungen KW - Boridokomplexe KW - Borylanionen KW - anti-van't Hoff/Le Bel Verbinfungen KW - transition metal boron complexes KW - borido complexes KW - boryl anions KW - anti van't Hoff/Le Bel-compounds Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73943 ER - TY - THES A1 - Öchsner, Andreas T1 - Synthese, Struktur und Reaktivität von [2]Borametallocenophanen der Gruppe 4 Metalle : Ihr katalytisches Verhalten und die Eigenschaften der erhaltenen Polymere T1 - Synthesis, structure and reactivity of [2]borametallocenophanes of group 4 metals : Their catalytic behaviour and properties of the obtained polymers N2 - In der vorliegenden Arbeit wird die Darstellung einer Reihe monoarylsubstituierter Bisdimethylamino-1-bromo-2-arlydiborane(4) beschrieben. Sowohl die Umsetzung der monoarylsubstituierten Ligandenvorstufen mit einem weiteren Äquivalent Lithium- oder Natriumaryl in einem Ether/Toluol-Gemisch als auch die Umsetzung von 1,2-Dibrom-bis(dimethylamino)diboran(4) mit einem mehrfachen Überschuss Lithium- oder Natriumaryl führte zur Bildung von diarylsubstituierten Diboranen(4). Umsetzung der Ligandenvorstufen mit Lithiumorganylen, wie beispielsweise Li[CH3] oder Li[C4H9] führt zu doppelt deprotonierten Verbindungen. Werden die dilithiierten Verbindungen mit Metallhalogeniden der Gruppe 4 in einem Toluol/Ether-Gemisch umgesetzt, können [2]Borametallocenophane erhalten werden. Von einigen der Verbindungen konnte die Struktur im Festkörper mittels Einkristallstrukturanalyse bestimmt werden. Die Verbindungen zeigen in Lösung ein dynamisches Gleichgewicht, welches durch die Flexibilität der B-B-Brücke ermöglicht wird. Dieses konnte mittels NMR Spektroskopie untersucht werden. Auch die Reaktivität der Verbindungen wurde erforscht. Versuche zur oxidativen Addition von Platin(0) in die B-B-Bindung, wie sie bereits für ähnliche Systeme beschrieben waren, scheiterten. Ebenfalls nicht erfolgreich war der versuchte Austausch der Dimethylaminogruppen an den Bor-Atomen. Di(fluorenyl)substituierte [2]Borametallocenophane zeigen in der Reihe der dargestellten Verbindungen ein einzigartiges Verhalten. Wird die dilithiierte Liganden-Vorstufe bei der Umsetzung mit den Metallhalogeniden der Gruppe 4 Licht ausgesetzt, so lagert sie zum 1,3-Diboretan um. Auch oxidativ kann diese Umlagerung ausgelöst werden. Das Umlagerungsprodukt war von anderen Reaktionen bereits bekannt, konnte im Rahmen dieser Arbeit aber erstmals strukturell charakterisiert werden. Die Dichloroverbindungen der [2]Borametallocenophane können mittels Li[CH3] in die entsprechenden Dimethylkomplexe überführt werden. Damit besteht die Möglichkeit, die Verbindungen nicht nur mit MAO, sondern auch mit alternativen Co-Katalysatoren, wie beispielsweise Tris-(pentafluorphenyl)boran für die Olefinpolymerisation zu aktivieren. Die Aktivierung mittels MAO wurde sowohl mittels NMR- als auch mittels UV/Vis-Spektroskopie bei verschiedenen [Al]/[Zr] Verhältnissen untersucht. Neben den [2]Borametallocenonphanen konnte mit Verbindung [(n5-C29H37)2ZrCl2] das erste Metallocen mit dem neuen OctafluH-Liganden und zwei koordinierenden Arylgruppen dargestellt werden. Um die Polymerisationseigenschaften der Verbindungen zu untersuchen, wurde ein neuer Versuchsaufbau entworfen. Zur Überwachung der Polymerisationen wurde ein Programm entwickelt, was in der Lage war, verbrauchte Gasmenge und Temperatur im Reaktoraufzuzeichnen. Hier wurden die katalytischen Eigenschaften einer Serie von [2]Borametallocenophanen und des dargestellten Metallocens [(n5-C29H37)2ZrCl2] in der Ethen-Homopolymerisation untersucht. Diese Polymere wurden mittels DSC auf ihre thermischen Eigenschaften hin geprüft. Ausgewählte Polymere wurden in Zusammenarbeit mit der LyondellBasell Industries, Basell Polyolefine GmbH, Frankfurt mittels GPC auf ihr mittleres Molekulargewicht und dessen Verteilung hin untersucht. Alle Daten wurden mit denen von industriell verwendeten Katalysatoren und den von Kraft bekannten [1]Borametallocenophanen verglichen. In weiteren Untersuchungen wurde überprüft, in wie weit die Polymerisationsbedingungen, wie beispielsweise das [Al]/[Zr]-Verhältnis, die Temperatur oder der Druck Auswirkungen auf die Eigenschaften des Polymers haben. Eine Reihe von Komplexen wurde überdies in der Ethen/[1]Hexen-Copolymerisation untersucht. Die erhaltenen Copolymere wurden mittels DSC-, GPC-, IR- und NMR- Spektroskopie analysiert. Zusammenfassend lässt sich feststellen, dass eine Reihe neuer Verbindungen dargestellt und charakterisiert werden konnte, wobei insbesondere der neuartige Ligand OctafluH (C29H38) eingesetzt wurde. Die dargestellten [2]Borametallocenophane sind aktive Katalysatoren in der Ziegler-Natta ähnlichen Olefinpolymerisation. Die dargestellten Polymere wurden mittels verschiedener Methoden untersucht. Es zeigte sich, dass [2]Borametallocenophane langkettige Polyolefine und Ethen/1-Hexen Copolymere liefern können. N2 - Based on Krafts work on [1]borametallocenophanes, a various number of monoarylsubstituted bisdimethylamino-1-bromo-2-aryldiboranes(4) were synthesized in the present work. Either the reaction of these monoarylsubstituted compounds with one equivalent of a lithiumaryl in toluene/ether or direct reaction of 1,2-dibromo-bis(dimethylamino)diborane(4) with a large excess of the lithiumaryl leads to the formation of diaryl substituted diboranes(4). Reaction of the ligand precursors with lithium organyls, e.g. Li[CH3] or Li[C4H9] leads to double deprotonation. [2]Borametallocenophanes are accessible via reaction of the dilithiated species with metal halides of Group 4 in toluene/ether. Due to the flexibility of the B-B-bridge, these complexes show dynamic behaviour in solution, which can be monitored by NMR spectroscopy. The solid state structure of some of these complexes could be examined by X-Ray diffraction. The reactivity of the new [2]borametallocenophanes also was reviewed. An oxidative addition reaction of platinum(0) was published for similar systems, but failed in this case. Neither was it possible to substitute the bisdimethylamino-groups bound to the boron-atoms. The prepared di(fluorenyl)substituted [2]borametallocenophanes show a unique feature. If the dilithiated precursor is exposed to visible or UV light during reaction with metal halides of group 4, these complexes rearrange to the 1,3-diboretane. This rearrangement also can be performed oxidatively. The Compound has been previously characterized in solution by multinuclear NMR spectroscopy; its structure in the solid state is now reported for the first time. The [2]borametallocenophanedichlorides can be reacted with Li[CH3], resulting in the corresponding dimethyl complexes. This allows for an alternative activation of the complexes with co-catalysts like tris(pentafluorophenyl)borane, in addition to the common activation with MAO. A model reaction for this alternative activation was performed using K[B(C6F5)4] to obtain a ion pair via chlorine abstraction. The common activation of the metal complexes using MAO was monitored either by NMR- or by UV/Vis-spectroscopy at various [Al]/[Zr] ratios. In addition to the [2]borametallocenophanes, [(n5-C29H37)2ZrCl2] could be prepared. It is the first metallocene with two aryl groups of the new octafluH-ligand (C29H38). To analyse the activity of the compounds in olefin polymerization processes, a new experimental set-up was designed. To control the polymerisation reactions, a Software program was developed, which allowed us to record gas-consumption and temperature in the reactor simultaneously. The catalytic behaviour of a whole series of [2]borametallocenophanes and of compound [(η5-C29H37)2ZrCl2] was studied in ethene homopolymerization. The thermal properties of all produced polymers where analyzed by DSC. The molecular weight distribution of selected examples was studied in cooperation with LyondellBasell Industries, Basell Polyolefine GmbH with GPC analyses. All data where directly compared to reference catalysts and to the [1]borametallocenophanes made by Kraft. The data show, that [2]borametallocenophanes have lower activities than [1]borametallocenophanes, but produce polymers of significantly higher average molecular weight. One can see clear differences throughout the data of the DSC measurements, for instance in the melting point and metling range, or crystallinity of the polymer. The melting points of the polymers obtained from [2]borametallocenophanes and compound [(n5-C29H37)2ZrCl2] are significantly higher than those of the reference catalysts. Additional experiments gave some insight into the relationship between polymerization conditions, e.g. the [Al]/[Zr] ratio, temperature or pressure and the key features of the polymers. It was shown that all these parameters influence the melting point and other specific values of the polymer. Additionally, selected examples were tested in the ethene/1-hexene copolymerization. The copolymers have been analyzed using DSC, GPC, IR and NMR spectroscopy. In conclusion, some new products were prepared and analyzed, in many cases with OctafluH (C29H38) as a substituent. All [2]borametallocenophanes are active catalysts in Ziegler-Natta type olefin polymerization processes. Analyses of the produced polymers revealed that [2]borametallocenophanes can produce long-chain polyethylene and ethene/1-hexene copolymers. KW - Anorganische Chemie KW - Homogene Katalyse KW - Ziegler-Natta-Katalysator KW - Metallocene KW - Bor KW - Polyolefine KW - Metallocenophane KW - metallocenophanes Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-44444 ER - TY - THES A1 - Zottnick, Sven Holger T1 - Lumineszierende Lanthanid-Koordinationsverbindungen auf Basis von Cyano- und Spiroborat Salzen und ionischen Flüssigkeiten T1 - Luminescent lanthanide coordination compounds based on cyano- and spiroborate salts and ionic liquids N2 - Im Rahmen dieser Arbeit konnten, ausgehend von Borat-haltigen Salzen und ionischen Flüssigkeiten (ILs) sowie Lanthanid-haltigen Precursoren, 30 neue Komplexe und Koordinationspolymere dargestellt werden. Dazu wurden vielfältige Synthesestrategien verfolgt und angewendet, unter anderem Salzmetathesen in Lösung, Solvothermalsynthesen und Ionothermalsynthesen. Ein Hauptaugenmerk bei der Synthese der Zielverbindungen lag auf deren Eigenschaften, wobei insbesondere die Photolumineszenzeigenschaften der erhaltenen Koordinationsverbindungen untersucht wurden. Als Borat-haltige Liganden wurden sowohl Cyanoborate als auch Oxoborate hinsichtlich ihrer Eignung zum Aufbau neuer Koordinationspolymere untersucht. Als Cyanoborat-haltige Edukte wurden dabei Säuren und ionische Flüssigkeiten mit Dicyano-, Tricyano- und Tetracyanoborat- Anionen eingesetzt, die durch die unterschiedliche Zahl an Cyanogruppen zu vielfältigen Koordinationsverbindungen führen können. Mittels Ionothermalsynthese konnten die Verbindungen 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) sowie [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] dargestellt werden, wobei es zu einer Transformation der ionischen Flüssigkeit [EMIm][B(CN)4] in ein Koordinationspolymer kommt, in dem sowohl Kation als auch Anion der IL beteiligt sind. Dabei ist es bemerkenswerterweise durch die Reaktionstemperatur möglich zu steuern, welches Produkt sich letztlich bildet. Ebenfalls durch Ionothermalsynthese gelang die Synthese von Einkristallen der Verbindung 3∞[La{C2F5B(CN)3}3], durch deren Kenntnis die Verbindungen 3∞[Ln{C2F5B(CN)3}3](Ln = Eu, Ho) als isotype Strukturen identifiziert und hinsichtlich ihrer Lumineszenzeigenschaften charakterisiert werden konnten. Durch Umsetzungen der Lanthanidchloride mit der Säure H[BH2(CN)2] in Solvothermalsynthesen in Pyridin (py) konnten eindimensionale Koordinationspolymere [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) erhalten werden. Unter vergleichbaren Synthesebedingungen aber im Lösungsmittel MeCN beobachtet man hingegen die Bildung von Raumnetzen der Zusammensetzung 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb). Die dreidimensionalen Koordinationspolymere 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) wurden ebenfalls in MeCN synthetisiert, allerdings ausgehend von der Säure [H3O][BH(CN)3]. Die erwähnten Verbindungen zeigen für die spektroskopisch relevanten Vertreter charakteristische Lumineszenz auf Basis von 5d-4f- respektive 4f-4f-Übergängen, die überwiegend auf der direkten Anregung der jeweiligen Lanthanidionen beruht. Mit dem Bis-salicylatoborat-Anion (= BSB−) gelang ausgehend von Na[BSB] und LnCl3 unter solvothermalen Bedingungen in Pyridin die Synthese der eindimensionalen, strangartigen Koordinationspolymere 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) und der zweidimensionalen, schichtartigen Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er). Einblicke über den Mechanismus der Bildung der genannten Verbindungen konnten durch den Komplex [ErCl2(py)4BSB] gewonnen werden, der eine sukzessive Substitution der Chlorid-Liganden nachweist. Die Verbindungen mit dem [BSB]−-Anion zeigen Photolumineszenz, die auf unterschiedliche Prozesse zurückgeführt werden kann. So weist 1∞[Y(BSB)3(py)2] Fluoreszenz auf, die von den [BSB]−-Anionen herrührt, während 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) sowie 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) Lumineszenz auf Basis von 5d-4f- und 4f-4f-Übergängen zeigen, die durch einen Antenneneffekt der koordinierenden [BSB]−-Anionen vergleichsweise intensiv beobachtet werden können. Eine Sonderstellung nehmen hier die Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) ein. Während mit Eu3+ überwiegend direkte Anregung festgestellt werden kann, treten für Ho3+ Reabsorptionsprozesse auf. Durch Kombination unterschiedlicher Gehalte an Eu3+- bzw. Tb3+-Ionen in den eindimensionalen Koordinationspolymeren 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25) können zudem Mischfarben der Lumineszenz erzeugt werden. Mit dem Komplex [B2O(C2O4)2(dmf)2] (dmf = Dimethylformamid) und dem Koordinationspolymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = Phthalatoborat) konnte zudem die Sonderstellung des [BSB]−-Anions deutlich gemacht werden, da es als einziges untersuchtes Spiroborat-Anion vollständig in Zielverbindungen eingebaut werden konnte, während vergleichbare Spiroborat-Anionen wie das [PHB]−-Anion in Gegenwart Lewis-acider Verbindungen hingegen die Abspaltung funktioneller Gruppen zeigten. Insgesamt konnten in dieser Arbeit somit zahlreiche neue, lumineszierende Koordinationspolymere mit Cyano- und Oxoboraten erfolgreich dargestellt werden. N2 - Within the scope of this thesis 30 new complexes and coordination polymers could be synthesized, starting from borate-containing salts and ionic liquids (ILs) as well as lanthanide compounds. Therefore, manifold synthesis strategies were applied, including salt metatheses, solvothermal syntheses and ionothermal syntheses. The main focus within the synthesis of desired products was set on the properties of the compounds, particularly on their photoluminescence behavior. Both cyanoborates and oxoborates were investigated regarding their potential in constructing new coordination polymers. Acids and ionic liquids with dicyano-, tricyano- and tetracyanoborate anions were used, leading to diverse coordination compounds due to their varying number of cyano groups. By applying ionothermal methods, the compounds 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) and [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] could be synthesized from the ionic liquid [EMIm][B(CN)4], showing a transformation of the ionic liquid into a coordination polymer incorporating both cation and anion of the IL. Remarkably, it is possible to control, which of the products is formed by changing the reaction temperature. Single crystals of the compound 3∞[La{C2F5B(CN)3}3] could also be synthesized by ionothermal methods. With the knowledge on the crystal structure, it was possible to identify the compounds 3∞[Ln{C2F5B(CN)3}3] (Ln = Eu, Ho) as isotypic structures, thereby allowing further investigations on their properties, including their luminescence features. By reacting lanthanide chlorides with the acid H[BH2(CN)2] in pyridine (py), one-dimensional coordination polymers [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) could be obtained. Under similar solvothermal conditions, but in MeCN as solvent, the formation of networks of the constitution 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb) is observed instead. The three-dimensional coordination polymers 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) were also synthesized in MeCN, however starting from the acid [H3O][BH(CN)3]. The compounds described show characteristic luminescence for spectroscopically relevant ions, based on 5d- 4f- and 4f-4f-transitions, respectively. Thereby, the observed luminescence is mainly based on a direct excitation of the respective lanthanide ions. With the bis-salicylatoborate-anion (= BSB−), it was possible to synthesize one-dimensional, strand-like coordination polymers 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) as well as twodimensional, sheet-like structures 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er), starting from Na[BSB] and LnCl3 under solvothermal conditions in pyridine. The molecular complex [ErCl2(py)4BSB] allowed further insights into the formation of the described compounds, as it proves a gradual substitution of chloride ligands by [BSB]−-anions. The compounds with the [BSB]−-anion show photoluminescence features ascribed to different processes. 1∞[Y(BSB)3(py)2] shows fluorescence originating from the [BSB]−-anion, while 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) and 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) show luminescence based on 5d-4f- and 4f-4f-transitions. These are quite intense, as an antenna effect of coordinating [BSB]−-anions can be observed. The compounds 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) prove as exceptions, as direct excitation is mainly observed for Eu3+, while Ho3+ shows reabsorption processes. By mixing different contents of Eu3+ and Tb3+ in the one-dimensional coordination polymers 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25), it is possible to create mixed luminescence colors. With the complex [B2O(C2O4)2(dmf)2] (dmf = dimethylformamide) and the coordination polymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = phthalatoborate) the exceptional position of the [BSB]−-anions within the class of spiroborates could be revealed, as it proved as only spiroborate anion within this work, that could be fully incorporated in the desired products. This is benficial to a great extent, as similar spiroborate anions like the [PHB]−-anion tend to loose functional groups in the presence of Lewis-acid compounds. Altogether, it was possible to successfully synthesize numerous luminescent coordination polymers with cyano- and oxoborates in this work. KW - Photolumineszenz KW - Lanthanoide KW - Borate KW - Spiroborate KW - Cyanoborate KW - Koordinationsverbindungen KW - Koordinationspolymere KW - MOFs Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157945 ER - TY - JOUR A1 - Zottnick, Sven H. A1 - Sprenger, Jan A. P. A1 - Finze, Maik A1 - Müller‐Buschbaum, Klaus T1 - Statistic Replacement of Lanthanide Ions in Bis‐salicylatoborate Coordination Polymers for the Deliberate Control of the Luminescence Chromaticity JF - ChemistryOpen N2 - Based on the strand‐like coordination polymer (CP) type \(^{1}\)\(_{∞}\)[Ln(BSB)\(_{3}\)(py)\(_{2}\)], [BSB]−=bis‐salicylatoborate anion, mixed Eu/Tb‐containing compounds of the constitution \(^{1}\)\(_{∞}\)[Eu\(_{x}\)Tb\(_{1-x}\)(BSB)\(_{3}\)(py)\(_{2}\)] were synthesised ionothermally for a phase width of (x=0.25–0.75) and characterized regarding structure and optical properties. Previously, known only for other lanthanides, the mixed 1D−Eu/Tb‐CPs show excellent options for statistic replacement of the Ln‐cations during synthesis yielding solid solutions. The products are highly luminescent, with the chromaticity being a direct function of the amount of the respective Ln‐ions. Corresponding to an overall addition of emission intensities, the green Tb\(^{3+}\) emission and the red Eu\(^{3+}\) emission allow for a chromaticity control that also includes yellow emission. Control of the luminescence colour renders them suitable examples of the versatility of statistic replacement of metal ions in coordination chemistry. In addition, crystallization of [EMIm]\(_{2}\)[YCl\(_{5}\)(py)] illuminates possible other products of the ionothermal reactions of [EMIm][BSB] with LnCl\(_{3}\) constituted by components not being part of the main CPs. KW - borates KW - coordination polymers KW - ionic liquids KW - lanthanides KW - luminescence Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-239953 VL - 10 IS - 2 SP - 164 EP - 170 ER - TY - JOUR A1 - Zilch, H. A1 - Tacke, Reinhold T1 - Fluorid-induzierte Fragmentierung von Acetyldimethylphenylsilan N2 - Acetyldimethylphenylsilane (2) reacts with TBAF · 3H\(_2\)O in THF and with KF in DMSO/H\(_2\)0, respectively, to give [(CH\(_3\) )\(_2\)SiO]\(_x\) and 1-Phenylethanol (3) which can be isolated with a nearly quantitative yield. The way 2 reacts with F\(^-\) contrasts with that of some aroyl- and heteroaroyltrimethylsilanes, described in the literature. A reaction mechanism is discussed which involves among others a 1 ,2-phenyl shift and a Brook rearrangement. N2 - Acetyldimethylphenylsilan (2) reagiert bei Raumtemperatur mit TBAF · 3H\(_2\)O in THF bzw. mit KF in DMSO/H\(_2\)O zu [(CH\(_3\))\(_2\)SiO]\(_x\) und 1-Phenylethanol (3), welches mit praktisch quantitativer Ausbeute isoliert werden kann. Dieses Reaktionsverhalten von 2 gegenüber F\(^-\) weicht drastisch ab von dem in der Literatur beschriebenen Verhalten einiger Aroyl- und Heteroaroyltrimethylsilane. Ein Reaktionsmcchanismus, der u.a. eine 1,2-Phenylverschiebung und eine BrookUmlagerung beinhaltet, wird zur Diskussion gestellt. KW - Anorganische Chemie Y1 - 1986 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-63802 ER - TY - JOUR A1 - Zhang, Xiaolei A1 - Friedrich, Alexandra A1 - Marder, Todd B. T1 - Copper-Catalyzed Borylation of Acyl Chlorides with an Alkoxy Diboron Reagent: A Facile Route to Acylboron Compounds JF - Chemistry—A European Journal N2 - Herein, the copper-catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B\(_{2}\)pin\(_{2}\)) or bis(neopentane glycolato)diboron (B\(_{2}\)neop\(_{2}\)) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon-skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N-methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late-stage conversion of carboxylic acid-containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p-toluoyl chloride and an NHC-copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate. KW - boronate KW - catalysis KW - borylation KW - carbonyl KW - copper Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-318318 VL - 28 IS - 42 ER - TY - JOUR A1 - Zhang, Fangyuan A1 - Radacki, Krzysztof A1 - Braunschweig, Holger A1 - Lambert, Christoph A1 - Ravat, Prince T1 - Zinc-[7]helicenocyanine and its discrete π-stacked homochiral Dimer JF - Angewandte Chemie International Edition N2 - In this communication, we demonstrate a novel approach to prepare a discrete dimer of chiral phthalocyanine (Pc) by exploiting the flexible molecular geometry of helicenes, which enables structural interlocking and strong aggregation tendency of Pcs. Synthesized [7]helicene-Pc hybrid molecular structure, zinc-[7]helicenocyanine (Zn-7HPc), exclusively forms a stable dimeric pair consisting of two homochiral molecules. The dimerization constants were estimated to be as high as 8.96×10\(^6\) M\(^{−1}\) and 3.42×107 M\(^{−1}\) in THF and DMSO, respectively, indicating remarkable stability of dimer. In addition, Zn\(^{-7}\)HPc exhibited chiral self-sorting behavior, which resulted in preferential formation of a homochiral dimer also in the racemic sample. Two phthalocyanine subunits in the dimeric form strongly communicate with each other as revealed by a large comproportionation constant and observation of an IV-CT band for the thermodynamically stable mixed-valence state. KW - organic chemistry KW - supramolecular assembly KW - chirality KW - helicenes KW - homochiral dimer KW - phthalocyanines Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256534 VL - 60 ER - TY - JOUR A1 - Zhang, Chonghe A1 - Liu, Xiaocui A1 - Wang, Junyi A1 - Ye, Qing T1 - A Three-Dimensional Inorganic Analogue of 9,10-Diazido-9,10-Diboraanthracene: A Lewis Superacidic Azido Borane with Reactivity and Stability JF - Angewandte Chemie N2 - Herein, we report the facile synthesis of a three-dimensional (3D) inorganic analogue of 9,10-diazido-9,10-dihydrodiboraantracene, which turned out to be a monomer in both the solid and solution state, and thermally stable up to 230 °C, representing a rare example of azido borane with boosted Lewis acidity and stability in one. Apart from the classical acid-base and Staudinger reactions, E−H bond activation (E=B, Si, Ge) was investigated. While the reaction with B−H (9-borabicyclo[3.3.1]nonane) led directly to the 1,1-addition on N\(_{α}\) upon N\(_{2}\) elimination, the Si−H (Et\(_{3}\)SiH, PhMe\(_{2}\)SiH) activation proceeded stepwise via 1,2-addition, with the key intermediates 5\(_{int}\) and 6\(_{int}\) being isolated and characterized. In contrast, the cooperative Ge−H was reversible and stayed at the 1,2-addition step. KW - E-H bond activation KW - boracycle KW - azido borane KW - lewis superacid KW - structure elucidation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-318322 VL - 61 IS - 36 ER - TY - THES A1 - Zell, Thomas T1 - NHC-stabilisierte Nickel-Komplexe in der stöchiometrischen und katalytischen Element-Element-Bindungsaktivierung T1 - NHC-stabilized Nickel Complexes in Stoichiometric and Catalytic Element-Element Bond-Activations N2 - Die vorliegende Arbeit befasst sich mit Untersuchungen von Element-Element- Bindungsaktivierungsreaktionen des dinuklearen Nickel(0)-NHC-Komplex [Ni2(iPr2Im)4(COD)] A mit verschiedenen reaktionsträgen Substraten, die ihrerseits wichtige Ausgangsstoffe für katalytische Anwendungen sind. Die Arbeit gliedert sich dabei in vier verschiedene Teile. N2 - The present work is concerned with investigations of element-element bond activation reactions of the dinuclear NHC-ligated nickel(0)-complex [Ni2(iPr2Im)4(COD)] A with inert substrates, which are themselves important compounds for catalytic transformations. This work is divided into four parts. KW - Heterocyclische Carbene <-N> KW - Nickelkomplexe KW - Chemische Bindung KW - Aktivierung KW - NHC KW - Nickel KW - Bindungsaktivierung KW - Organometallchemie KW - Katalyse KW - NHC KW - Nickel KW - Bond Activation KW - Organometallic Chemistry KW - Catalysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57484 ER - TY - THES A1 - Zarzycki, Bartosz T1 - Element-Element Bindungsaktivierung an [Ni(iPr2Im)2] und [(η5-C5H5)Co(iPr2Im)] T1 - Element-element bond-activation on [Ni(iPr2Im)2] and [(η5-C5H5)Co(iPr2Im)] N2 - Die vorliegende Dissertation behandelt zum einen die mechanistischen Details von Bindungsaktivierungs-Reaktionen an Disauerstoff und weißem Phosphor mit den Komplexfragmenten 1[Ni(iPr2Im)2] und 3[(η5-C5H5)Co(iPr2Im)] und zum anderen die Regioselektivität von oxidativen Insertionsreaktionen des 1[Ni(iPr2Im)2]-Komplexfragments in C–X-Bindungen substituierter Fluoraromaten (X = F, OCH3, CN, H). N2 - The presented thesis deals with the mechanistic details of bond activation reactions of the oxygen molecule and white phosphorus at the reactive complex fragments 1[Ni(iPr2Im)2] and 3[(η5-C5H5)Co(iPr2Im)] and with the regioselectivity of oxidative insertion reactions of the 1[Ni(iPr2Im)2]-fragment into C–X-bonds of functionalized fluorinated derivatives of benzene. KW - Heterocyclische Carbene <-N> KW - Homogene Katalyse KW - Reaktionsmechanismus KW - Theoretische Chemie KW - Weißer Phosphor KW - Cobalt KW - Nickel KW - Metallkomplexe KW - DFT KW - Dichtefunktionalformalismus KW - bonding mechanisms KW - orbital diagram Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-77195 ER -