TY - JOUR A1 - Czerniuk, T. A1 - Brüggemann, C. A1 - Tepper, J. A1 - Brodbeck, S. A1 - Schneider, C. A1 - Kamp, M. A1 - Höfling, S. A1 - Glavin, B. A. A1 - Yakovlev, D. R. A1 - Akimov, A. V. A1 - Bayer, M. T1 - Lasing from active optomechanical resonators JF - Nature Communications N2 - Planar microcavities with distributed Bragg reflectors (DBRs) host, besides confined optical modes, also mechanical resonances due to stop bands in the phonon dispersion relation of the DBRs. These resonances have frequencies in the 10- to 100-GHz range, depending on the resonator's optical wavelength, with quality factors exceeding 1,000. The interaction of photons and phonons in such optomechanical systems can be drastically enhanced, opening a new route towards the manipulation of light. Here we implemented active semiconducting layers into the microcavity to obtain a vertical-cavity surface-emitting laser (VCSEL). Thereby, three resonant excitations--photons, phonons and electrons--can interact strongly with each other providing modulation of the VCSEL laser emission: a picosecond strain pulse injected into the VCSEL excites long-living mechanical resonances therein. As a result, modulation of the lasing intensity at frequencies up to 40 GHz is observed. From these findings, prospective applications of active optomechanical resonators integrated into nanophotonic circuits may emerge. KW - physical sciences KW - applied physics KW - optical physics Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121559 VL - 5 ER - TY - THES A1 - Gold, Peter T1 - Quantenpunkt-Mikroresonatoren als Bausteine für die Quantenkommunikation T1 - Quantum Dot Microresonators as Building Blocks for Quantum Communication N2 - Technologien, die im wesentlichen auf quantenmechanischen Gesetzen beruhen, wie die Quanteninformationsverarbeitung und die Quantenkommunikation, sind weltweit Gegenstand enormer Forschungsanstrengungen. Sie nutzen die einzigartigen Eigenschaften einzelner Quantenteilchen, wie zum Beispiel die Verschränkung und die Superposition, um ultra-schnelle Rechner und eine absolut abhörsichere Datenübertragung mithilfe von photonischen Qubits zu realisieren. Dabei ergeben sich Herausforderungen bei der Quantenkommunikation über große Distanzen: Die Reichweite der Übertragung von Quantenzuständen ist aufgrund von Photonenverlusten in den Übertragungskanälen limitiert und wegen des No-Cloning-Theorems ist eine klassische Aufbereitung der Information nicht möglich. Dieses Problem könnte über den Einsatz von Quantenrepeatern, die in den Quantenkanal zwischen Sender und Empfäger eingebaut werden, gelöst werden. Bei der Auswahl einer geeigneten Technologieplattform für die Realisierung eines Quantenrepeaters sollten die Kriterien der Kompaktheit und Skalierbarkeit berücksichtigt werden. In diesem Zusammenhang spielen Halbleiterquantenpunkte eine wichtige Rolle, da sie sich nicht nur als Zwei-Niveau-Systeme ideal für die Konversion und Speicherung von Quantenzuständen sowie für die Erzeugung von fliegenden Qubits eignen, sondern auch mit den gängigen Mitteln der Halbleitertechnologie und entsprechender Skalierbarkeit realisierbar sind. Ein Schlüssel zur erfolgreichen Implementierung dieser Technologie liegt in der Zusammenführung des Quantenpunktes als Quantenspeicher mit einem Bauteil, welches einzelne Photonen einfangen und aussenden kann: ein Mikroresonator. Aufgrund der Lokalisierung von Elektron und Photon über einen längeren Zeitraum auf den gleichen Ort kann die Effizienz des Informationstransfers zwischen fliegenden und stationären Qubits deutlich gesteigert werden. Des Weiteren können Effekte der Licht-Materie-Wechselwirkung in Resonatoren genutzt werden, um hocheffiziente Lichtquellen zur Erzeugung nichtklassischen Lichts für Anwendungen in der Quantenkommunikation zu realisieren. Vor diesem Hintergrund werden in der vorliegenden Arbeit Halbleiterquantenpunkte mithilfe von spektroskopischen Methoden hinsichtlich ihres Anwendungspotentials in der Quantenkommunikation untersucht. Die verwendeten Quantenpunkte bestehen aus In(Ga)As eingebettet in eine GaAs-Matrix und sind als aktive Schicht in vertikal emittierende Mikroresonatoren auf Basis von dielektrischen Spiegeln integriert. Dabei werden entweder planare Strukturen verwendet, bei denen die Spiegel zur Erhöhung der Auskoppeleffizienz von Photonen dienen, oder aber Mikrosäulenresonatoren, die es ermöglichen, Effekte der Licht-Materie-Wechselwirkung in Resonatoren zu beobachten. Zur Untersuchung der Strukturen wurden Messplätze zur Photolumineszenz-, Resonanzfluoreszenz-,Reflexions- und Photostromspektroskopie sowie zu Photonenkorrelationsmessungen erster und zweiter Ordnung aufgebaut oder erweitert und eingesetzt. Reflexions- und Photolumineszenzspektroskopie an Mikrosäulenresonatoren mit sehr hohen Güten: Eine der wichtigsten Eigenschaften eines Mikrosäulenresonators ist seine Güte, auch Q-Faktor genannt. Er beeinflusst nicht nur das Regime der Licht-Materie-Wechselwirkung, sondern auch die Höhe der Auskoppeleffizienz eines Quantenpunkt-Mikrosäulenresonator-Systems. Vor diesem Hintergrund wird eine Analyse der Verlustmechanismen, die eine Abnahme des Q-Faktors bewirken, durchgeführt. Dazu wird die Güte von Mikrosäulenresonatoren mit Durchmessern im Bereich von 2 − 8 µm mithilfe von Reflexions- und Photolumineszenzspektroskopie gemessen. Aufgrund der erhöhten Absorption an nichtresonanten Quantenpunkten und freien Ladungsträgern sind die Verluste bei den Messungen in Photolumineszenzspektroskopie höher als in Reflexionsspektroskopie, wodurch die in Reflexionsspektroskopie ermittelten Q-Faktoren für alle Durchmesser größer sind. Für einen Quantenpunkt-Mikrosäulenresonator mit einem Durchmesser von 8 µm konnten Rekordgüten von 184.000 ± 8000 in Photolumineszenzspektroskopie und 268.000 ± 13.000 in Reflexionsspektroskopie ermittelt werden. Photostromspektroskopie an Quantenpunkt-Mikrosäulenresonatoren: Durch einen verbesserten Messaufbau und die Verwendung von Mikrosäulenresonatoren mit geringen Dunkelströmen konnte erstmals der Photostrom von einzelnen Quantenpunktexzitonlinien in elektrisch kontaktierten Mikroresonatoren detektiert werden. Dies war Voraussetzung, um Effekte der Licht-Materie-Wechselwirkung zwischen einem einzelnen Quantenpunktexziton und der Grundmode eines Mikrosäulenresonators elektrisch auszulesen. Hierzu wurden Photostromspektren in Abhängigkeit der Verstimmung zwischen Exziton und Kavitätsmode unter Anregung auf die Säulenseitenwand sowie in axialer Richtung durchgeführt. Unter seitlicher Anregung konnte der Purcell-Effekt, als Zeichen der schwachen Kopplung, über eine Abnahme der Photostromintensität des Quantenpunktes im Resonanzfall nachgewiesen werden und der entsprechende Purcell-Faktor zu Fp = 5,2 ± 0,5 bestimmt werden. Da die Transmission des Resonators bei der Anregung auf die Säulenoberseite von der Wellenlänge abhängt, ist die effektive Anregungsintensität eines exzitonischen Übergangs von der spektralen Verstimmung zwischen Exziton und Resonatormode bestimmt. Dadurch ergab sich im Gegensatz zur Anregung auf die Seitenwand des Resonators eine Zunahme des Photostroms in Resonanz. Auch in diesem Fall konnte ein Purcell-Faktor über eine Anpassung ermittelt werden, die einen Wert von Fp = 4,3 ± 1,3 ergab. Des Weiteren wird die kohärente optische Manipulation eines exzitonischen Qubits in einem Quantenpunkt-Mikrosäulenresonator gezeigt. Die kohärente Wechselwirkung des Zwei-Niveau-Systems mit den Lichtpulsen des Anregungslasers führt zu Rabi-Oszillationen in der Besetzungswahrscheinlichkeit des Quantenpunktgrundzustandes, die über dessen Photostrom ausgelesen werden können. Über eine Änderung der Polarisation des Anregungslasers wurde hier eine Variation der Kopplung zwischen dem Quantenemitter und dem elektromagnetischen Feld demonstriert. Interferenz von ununterscheidbaren Photonen aus Halbleiterquantenpunkten: Für die meisten technologischen Anwendungen in der Quantenkommunikation und speziell in einem Quantenrepeater sollten die verwendeten Quellen nicht nur einzelne sondern auch ununterscheidbare Photonen aussenden. Vor diesem Hintergrund wurden Experimente zur Interferenz von ununterscheidbaren Photonen aus Halbleiterquantenpunkten in planaren Resonatorstrukturen durchgeführt. Dazu wurde zunächst die Interferenz von Photonen aus einer Quelle demonstriert. Im Fokus der Untersuchungen stand hier der Einfluss der Anregungsbedingungen auf die Visibilität der Zwei-Photonen-Interferenz. So konnte in nichtresonanter Dauerstrichanregung ein nachselektierter Wert der Visibilität von V = 0,39 gemessen werden. Um den nicht nachselektierten Wert der Visibilität der Zwei-Photonen-Interferenz zu bestimmen, wurde die Einzelphotonenquelle gepulst angeregt. Während die Visibilität für nichtresonante Anregung in die Benetzungsschicht über ein Wiederbefüllen und zusätzliche Dephasierungsprozesse durch Ladungsträger auf einen Wert von 12% reduziert ist, konnte unter p-Schalen-Anregung in einem Hong-Ou-Mandel-Messaufbau eine hohe Visibilität von v = (69 ± 1) % erzielt werden. Außerdem wurde die Interferenz von zwei Photonen aus zwei räumlich getrennten Quantenpunkten demonstriert. Hierbei konnte eine maximale Visibilität von v = (39 ± 2)% für gleiche Emissionsenergien der beiden Einzelphotonenquellen erzielt werden. Durch die Änderung der Photonenenergie über eine Temperaturvariation eines der beiden Quantenpunkte konnten die Photonen der beiden Quellen zunehmend unterscheidbar gemacht werden. Dies äußerte sich in einer Abnahme der Interferenz-Visibilität. Um noch größere Visibilitäten der Zwei-Photonen-Interferenz zu erreichen, ist die resonante Anregung des Quantenpunktexzitons vielversprechend. Deswegen wurde ein konfokales Dunkelfeldmikroskop für Experimente zur Resonanzfluoreszenz aufgebaut und bereits Einzelphotonenemission sowie das Mollowtriplet im Resonanzfluoreszenzspektrum eines Quantenpunktexzitons nachgewiesen. N2 - Technologies relying on the basic laws of quantum mechanics are subject to huge research interest all over the world. They use the unique properties of single quantum particles, like quantum entanglement and superposition, to allow for ultra-fast computers and absolutely secure data transfer with photonic qubits. However, there are some challenges with quantum communication over long distances. The transfer range is limited due to unavoidable photon losses in transfer channels and classic signal amplification is not possible because of the ’no-cloning-theorem’. This issue could be solved by integrating quantum repeaters into the quantum channel between the transmitter and the receiver. An appropriate technology platform for the implementation of a quantum repeater should satisfy the criteria of compactness and scalability. In this context, semiconductor quantum dots become important. As two-level-systems, quantum dots are not only suited for the conversion and storage of quantum states and the generation of flying qubits, but also offer the advantage to be realized with standard semiconductor technology and the corresponding scalability. The key to successfully implement this technology is to combine quantum dots with a device that can trap and emit photons: a microcavity. This device allows for increasing the interaction between the two-level-system and a photon by localizing both at the same place for an extended period of time. In addition, cavity quantum electrodynamics effects can be used to create highly efficient sources of non-classical light for applications in quantum communications. In this context, semiconductor quantum dots are studied in this thesis by means of spectroscopic methods with regard to their potential for applications in quantum communication. The quantum dots consist of In(Ga)As embedded in a GaAs matrix and are integrated into microcavities with distributed bragg reflectors. Here, either planar structures are used to increase the out-coupling efficiency of photons by an asymmetric cavity design or micropillars are applied to facilitate the observation of light-matter coupling in the cavity quantum electrodynamics regime. Furthermore, different experimental setups were extended or built to investigate these structures, including photoluminescence, resonance fluorescence, reflection and photocurrent spectroscopy and setups for measuring the first and second order correlation function. Reflection- and Photoluminescence Spectroscopy of Micropillar Cavities with Very Large Quality Factors One of the most important characteristics of a microresonator is its quality factor. It influences not only the regime of the light-matter interaction but also the out-coupling efficiency of a quantum dot-micropillar cavity system. In this context, an analysis of the loss channels that lead to a reduction of the quality factor is performed. For this purpose, the quality factor of micropillar cavities with different diameters in the range 2 − 8 µm are measured by reflection- and photoluminescence spectroscopy. Because of the increased absorption due to nonresonant quantum dots and free carriers, the photon losses in photoluminescence are larger than in reflection spectroscopy. Therefore, the quality factors measured in reflection spectroscopy are larger for each diameter. Record quality factors of 184,000 ± 8,000 in photoluminescence and 268,000 ± 13,000 were obtained for a quantum dot-micropillar cavity with a diameter of 8 µm. Photocurrent Spectroscopy on Quantum Dot-Micropillar Cavities: An improved experimental setup and the exploitation of micropillar cavities with reduced dark currents made it possible to observe single quantum dot exciton lines in the photocurrent signal of an electrically contacted microresonator. This was the precondition for the electrical readout of light-matter coupling effects between a single quantum emitter and the fundamental mode of a micropillar cavity. For this purpose, photocurrent spectra were taken as a function of the detuning between the exciton and the cavity mode under excitation either on the pillar sidewall or on top of the pillar. In sidewall excitation, the Purcell effect, as a clear sign of the weak coupling regime, could be observed through a reduced photocurrent signal of the quantum dot in resonance with the cavity mode and a corresponding Purcell factor of Fp = 5,2 ± 0,5. In top excitation, the transmission of the resonator is a function of the wavelength, i.e. the maximum transfer of light into the resonator occurs when the laser wavelength coincides with an optical resonance of the micropillar cavity. Therefore, the effective excitation power of the excitonic transition depends on the spectral detuning between the exciton and the cavity mode. Due to this detuning dependent excitation intensity, the photocurrent signal shows an increase at resonance, which is in contrast to the sidewall excitation scheme. Also, in this case a Purcell factor of Fp = 4,3 ± 1,3 was extracted by a fit to the experimental data. In addition, the coherent optical control of an excitonic qubit in a quantum dot micropillar cavity is demonstrated. The coherent interaction of the two-level system with the light pulses of the excitation laser leads to Rabi oscillations in the occupation probability of the quantum dot ground state, which were monitored via the photocurrent originating from the quantum dot. By changing the polarization angle of the exciting laser, a variation of the coupling between the quantum emitter and the electromagnetic field was observed. Interference of Indistinguishable Photons Emitted from Semiconductor Quantum Dots: Most technological applications in the field of quantum communication, and especially quantum repeaters, require photon sources of not only single but also indistinguishable photons. In this context, experiments on the interference of indistinguishable photons emitted from semiconductor quantum dots in planar resonator structures were performed. First, the interference of consecutively emitted photons from the same quantum dot is studied. The investigation focuses on the influence of the excitation condition on the two-photon interference visibility. In nonresonant continuous wave excitation, a postselected value of the two-photon interference visibility of V = 0,39 is measured. To obtain the non-postselected value, the excitation of the single photon source has to be pulsed. Recapturing and dephasing processes of additional charge carriers reduce the nonpostselected visibility for nonresonant excitation into the wetting layer states to a value of 12%, while for p-shell excitation, a larger visibility of v = (69 ± 1) % was achieved in a Hong-Ou-Mandel setup.Furthermore, the interference of two photons from two spatially separated quantum dots is demonstrated. Here, a maximum visibility of v = (39 ± 2)% was achieved for equal emission energies of both single photon sources. By changing the emission energy of one of the two quantum dots via a variation of its temperature, the photons emitted from each source could be made increasingly distinguishable, resulting in a decrease of the interference visibility. To obtain even larger two-photon interference visibilities, a strict resonant excitation of the quantum dot exciton is very promising. Hence, a confocal dark field microscope was built for experiments in resonance fluorescence. Single photon emission as well as the Mollow triplet were already identified in resonance fluorescence. KW - Quantenpunkt KW - Optischer Resonator KW - Quantenkommunikation KW - Mikroresonator KW - Purcell-Effekt KW - quantum dot KW - micro cavity KW - two photon interference KW - photocurrent KW - Ununterscheidbarkeit KW - Einzelphotonenemisson KW - Photostrom Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121649 ER - TY - THES A1 - Gensler, Daniel T1 - Entwicklung klinischer Methoden zur Quantifizierung der longitudinalen Relaxationszeit T1 in der MRT T1 - Development of clinical methods for quantifying the longitudinal relaxation time T1 in MRI N2 - Die Aufgabenstellung in der vorliegenden Arbeit bestand in der Entwicklung und Umsetzung neuer T1-Quantifizierungsverfahren, die zuverlässig in der klinischen Routine angewendet werden können. Die ausgearbeiteten Techniken umfassten dabei zwei Hauptarbeitsschwerpunkte. Zum einen die Implementierung einer neuartigen dynamischen T1- Thermometriemethode für MR-Sicherheitsuntersuchungen medizinischer Geräte und Implantate, wie beispielsweise Kathetern oder Herzschrittmachern, und zum anderen die Entwicklung eines robusten kardialen T1-Mapping-Verfahrens, welches auch bei stärker erkrankten Patienten mit eingeschränkter Atemanhaltefähigkeit stabil anwendbar ist. Mit der entwickelten kombinierten Heiz- und T1-Thermometriesequenz konnte ein neues Verfahren präsentiert werden, mit dem ein zu untersuchendes medizinisches Gerät oder Implantat kontrolliert erwärmt und die Temperaturänderung zeitgleich präzise erfasst werden kann. Dabei war es möglich, die HF-induzierte Erwärmung der metallischen Beispielimplantate sowohl in homogenem Gel als auch in inhomogenem Muskelgewebe exakt und ortsaufgelöst zu quantifizieren. Die MR-technisch errechneten Temperaturwerte zeigten dabei eine sehr gute Übereinstimmung zu den ermittelten Referenzwerten mit einer Temperaturabweichung von meist weniger als 1K. Die Ergebnisse zeigen, dass es mit der präsentierten Methode möglich ist, die räumliche Temperaturverteilung in einem großen Bereich mit einer einzigen Messung quantitativ zu erfassen. Dies ist neben der Nichtinvasivität der Methode der größte Vorteil im Vergleich zu der Einzelpunktmessung mittels eines bei solchen Messungen sonst zumeist verwendeten fluoroptischen Temperatursensors. Bei gestreckten Implantaten kann demnach idealerweise das gesamte Objekt während einer einzigen Messung auf potentielle Temperaturänderungen oder sogenannte Hotspots untersucht werden, was bei der Verwendung von Temperatursensoren lediglich mit großem Zeitaufwand möglich ist, da hier die Temperatur jeweils nur punktuell erfasst werden kann. Im Vergleich zu anderen publizierten MR-Thermometrieverfahren, welche auf der PRF-Technik basieren, bietet die hier präsentierte Methode vor allem den Vorteil, dass hiermit auch eine präzise Temperaturquantifizierung in inhomogenem biologischem Gewebe mit starken Suszeptibilitätsunterschieden wie beispielsweise zwischen Herz und Lunge möglich ist. Somit stellt die Methode ein leistungsstarkes Hilfsmittel für nicht-invasive MR-Sicherheitsuntersuchungen nicht nur an medizinischen Implantaten sondern beispielsweise auch für MR-geführte Interventionen dar. Mit der entwickelten kardialen T1-Mapping-Sequenz TRASSI wurde eine leistungsstarke Methode zur exakten und hoch aufgelösten Generierung kardialer T1-Karten in äußerst kurzer Messzeit (< 6 s) vorgestellt. Durch ihre außerordentliche Robustheit sowohl gegenüber Bildartefakten als auch Herzrhythmusstörungen während der Datenakquisition bietet die Sequenz deutlich verbesserte Möglichkeiten für die Diagnostik verschiedener Herzerkrankungen. Aufgrund der sehr kurzen Akquisitionszeit wird insbesondere auch die Generierung von T1-Karten bei schwer erkrankten Patienten mit kurzer Atemanhaltefähigkeit ermöglicht. Im Vergleich zu derzeit üblicherweise verwendeten alternativen Verfahren wie etwa MOLLI, konnten die T1-Karten mit vergleichbarer Bildauflösung in bis zu 70% kürzerer Messzeit akquiriert werden. Die Ergebnisse der durchgeführten Phantommessungen belegen außerdem, dass die Methode exaktere T1-Werte liefert als dies beispielsweise mit MOLLI möglich ist. Des Weiteren weist TRASSI im Gegensatz zu MOLLI keine T1-Abhängigkeit von der Herzrate auf, wodurch die vorgestellte Technik besonders für diagnostische Studien geeignet ist, welche eine sehr hohe Genauigkeit und Reproduzierbarkeit im Zeitverlauf oder zwischen verschiedenen Patienten erfordern. Mit TRASSI konnten die Strukturen des Herzens bei den durchgeführten in vivo Untersuchungen durchweg mit scharfen Kanten und ohne Bewegungsartefakte dargestellt werden. Dabei wurde unabhängig von der Herzrate und der Bildebene stets eine sehr gute Bildqualität erreicht. Der Hauptgrund hierfür ist vermutlich in der sehr kurzen Akquisitionszeit und der radialen Datenaufnahme zu sehen. Beide Verfahren reduzieren Artefakte aufgrund von Bewegungen wie beispielsweise Herzschlag und Atmung erheblich. Die aufgenommenen T1-Karten zeigen bei allen Probanden und Patienten eine gute diagnostische Bildqualität. So konnten auch die infarzierten Bereiche bei Patienten mit Myokardinfarkt deutlich visualisiert und quantitativ erfasst werden. Nochmals hervorzuheben ist die beobachtete besondere Robustheit der TRASSI Methode gegenüber Artefakten beziehungsweise T1-Quantifizierungsfehlern bei Patienten mit Herzrhythmusstörungen. Auch bei untersuchten Patienten mit starken Arrhythmien während der Bildgebung konnte eine sehr gute Bildqualität und Genauigkeit der errechneten T1-Karten erreicht werden. Die Ergebnisse der Extrazellularvolumen-Quantifizierung zeigen zudem, dass mittels TRASSI auch weiterführende diagnostische Methoden entwickelt und angewandt werden können. Dabei konnten durch Rückrechnung hochaufgelöster und präziser Extrazellularvolumen-Karten beispielsweise Infarktbereiche deutlich visualisiert und signifikante Unterschiede zwischen akut und chronisch infarziertem Herzmuskelgewebe nicht nur identifiziert sondern auch quantitativ charakterisiert werden. Somit ist diese Methode insbesondere für eine potentielle Differenzierung zwischen reversibel und irreversibel geschädigten Herzarealen interessant. Für die Zukunft ist es wünschenswert, weitergehende Untersuchungen an verschiedenen spezifischen Herzerkrankungen vorzunehmen. Zu solchen Erkrankungen gehören beispielsweise die Herzmuskelentzündung (Myokarditis) oder Herzklappenerkrankungen. Diese Krankheitsbilder sind hinsichtlich einer möglichen transienten oder permanenten Schädigung des Herzmuskels mit den bisher verfügbaren Verfahren nur sehr schwer oder lediglich im weit fortgeschrittenen Stadium exakt diagnostizierbar. Die vorgestellte TRASSI-Sequenz bietet hier eine gute Möglichkeit für eine frühzeitige Erkennung der Auswirkungen solcher Erkrankungen auf den Herzmuskel. Weiterführende Untersuchungen der TRASSI-Methode zu deren Robustheit gegenüber spezifischen Herzrhythmusstörungen und ein umfassender Vergleich zum bereits etablierten MOLLI-Verfahren könnten darüber hinaus die Alltagstauglichkeit von TRASSI weiter spezifizieren und den Weg in die klinische Routine ebnen. Die bereits dargelegten positiven Ergebnisse des Verfahrens lassen vermuten, dass TRASSI potentiell ein sehr gutes nicht-invasives Diagnoseverfahren für verschiedenste Herzerkrankungen darstellt. Im Vergleich zu bereits bestehenden Techniken liegen die Vorteile der TRASSI-Methode nach den bisher vorliegenden Ergebnissen zusammenfassend vor allem in der Generierung diagnostisch verlässlicherer T1-Werte bei gleichzeitig verringerter Messzeit, wodurch das Verfahren insbesondere auch für schwer erkrankte Patienten mit starken Arrhythmien und eingeschränkter Atemanhaltefähigkeit geeignet ist. TRASSI ist darüber hinaus aber auch für MR-Untersuchungen im Hochfeld besser geeignet als entsprechende bSSFP-basierende Verfahren wie beispielsweise MOLLI. Dies liegt vor allem daran, dass TRASSI eine Gradientenecho-basierte Bildgebungsmethode ist und somit eine niedrige spezifische Absorptionsrate aufweist. Zudem sind Gradientenecho-Sequenzen allgemein weniger empfindlich gegenüber Suszeptibilitätsartefakten, so dass beispielsweise metallische Implantate bei Patienten sich weniger störend auf die erreichbare Bildqualität auswirken. In der vorliegenden Arbeit wurde sowohl eine exakte T1-Thermometriesequenz als auch eine sehr schnelle und präzise kardiale T1-Mapping-Methode vorgestellt. Für zukünftige Arbeiten ist es wünschenswert, beide Sequenzen bzw. deren Mechanismen zu vereinen und eine Temperaturquantifizierung am Herzen praktisch durchzuführen. Dies wäre zum einen für MR-Sicherheitsuntersuchungen von Schrittmacherelektroden in vivo vorteilhaft, und zum anderen wäre hiermit eine direkte Erfolgskontrolle während einer Katheterablation realisierbar. Eine solche Ablationsbehandlung könnte durch eine genaue Lokalisierung des behandelten - also erhitzten - Herzareals sehr viel präziser durchgeführt werden, wodurch auch bei komplexeren Ablationen die Behandlungserfolge erhöht werden könnten. In einer ersten Veröffentlichung hierzu konnte bereits gezeigt werden, dass eine MR-gestützte Katheterablation die Heilungs- und Erfolgsaussichten des Eingriffes steigern kann. Dieses Verfahren könnte potentiell mit Hilfe einer Echtzeittemperaturüberwachung basierend auf dem TRASSI-Verfahren noch weiter verbessert werden. In Zusammenfassung wurden in dieser Arbeit zwei neue T1-Quantifizierungsverfahren entwickelt und vorgestellt, die voraussichtlich zuverlässig im klinischen Alltag angewendet werden können und neue nicht-invasive diagnostische Möglichkeiten eröffnen. Die implementierten Sequenzen ermöglichen dabei zum einen eine exakte Temperaturquantifizierung und zum anderen ein präzises kardiales T1-Mapping. Beide Verfahren versprechen dabei robuste und reproduzierbare Ergebnisse und könnten in Zukunft den Weg in die klinische Routine finden und so bei einer fundierten Diagnostik verschiedenster Herzerkrankungen behilflich sein. N2 - The goal of the present study was to develop and implement new T1-quantification methods that can be reliably applied in clinical practice. The elaborated techniques focused on two main objectives: first, the implementation of a novel dynamic T1-thermometry technique for MR-safety investigations of medical devices and implants, such as catheters or pacemakers; and second, the development of a robust cardiac T1-mapping method, which is applicable even in severely ill patients with limited breath-hold capabilities. With the newly developed combined heating and T1-thermometry sequence, a new MR method was presented, which allowed a controlled heating of a medical device or implant under investigation, while simultaneously detecting temperature changes near these devices with high accuracy. With this MR sequence it was possible to quantify and spatially accurately resolve the radio frequency-induced heating of exemplary metallic implants both in a homogeneous gel phantom and in inhomogeneous porcine muscle. The MR-calculated temperature values showed good agreement with the determined reference values, with a temperature deviation of usually less than 1K. The results show that with the presented method it is possible to quantify the spatial temperature distribution in a large area. This is - in addition to the non-invasiveness of the method - the main advantage compared to the single-point measurement of commonly used fluoroptic temperature sensors: Ideally, elongated implants can be characterized regarding potential temperature changes or hot spots along the whole device during a single MR measurement. Compared to other published MR-thermometry methods based on the PRF technique the presented T1-based technique particularly provides the advantage of a precise temperature quantification even in inhomogeneous biological tissue with strong susceptibility differences such as between the heart and the lungs. Thus, the method represents a powerful tool for non-invasive MR-safety investigations not only for implanted medical devices, but also for MR-guided interventions. With the developed cardiac T1-mapping sequence TRASSI, a powerful technique for the generation of exact, high-resolution cardiac T1-maps acquired in very short measurement time (< 6 s) was presented. Through the extraordinary robustness both to image artifacts and heart rhythm disturbances during data acquisition, this sequence provides significantly improved possibilities for various diagnostic purposes in clinical cardiology. Due to the very short acquisition time, TRASSI particularly offers the possibility for the generation of T1-maps in severely ill patients with short breath-hold capabilities. Compared to currently commonly used alternative MR techniques, such as MOLLI, T1-maps with similar resolution could be acquired in up to 70 % shorter measurement time. Furthermore, the results of the phantom measurements show that TRASSI provides more accurate T1 values than MOLLI. In addition, TRASSI shows - in contrast to MOLLI - no heart rate T1-dependency. Thus, the presented technique is particularly suited for diagnostic studies, which require a very high accuracy and reproducibility over time or between different patients. With TRASSI, the heart morphology could consistently be identified with sharp edges and without any motion artifacts in the performed in vivo studies. The good image quality could be achieved in all measurements regardless of the heart rate and the image plane. The main reason for these findings can be anticipated in the very short acquisition time and the radial data acquisition. Both significantly reduce artifacts due to motion such as heartbeat and breathing. Diagnostic image quality of the T1 maps in patients with myocardial infarction allowed for visualization and spatial T1-quantification in all subjects. Of note is the observed extraordinary robustness of the TRASSI method against artifacts and T1-errors in patients with cardiac arrhythmias. Even in patients with severe arrhythmias during the imaging procedure a very good image quality and accuracy of the calculated T1-maps could be achieved. Moreover, the results of the extracellular volume quantification show that with TRASSI additional diagnostic methods can be developed and applied. The calculation of accurate high-resolution extracellular volume maps was suitable for visualization of infarcted areas in the myocardium. Furthermore, significant differences between acute and chronically infarcted myocardial tissue could not only be visually identified, but also quantitatively characterized. Thus, this method is particularly interesting for a differentiation between reversible and irreversible myocardial injury. For the future, it is desirable to carry out further clinical studies on various specific heart diseases. Such diseases include, for example, inflammation of the heart muscle (myocarditis) or valvular heart diseases. The diagnosis of these diseases regarding a possible damage of the myocardium is currently problematic and only possible in advanced stages using the methods available today. Here, the presented TRASSI sequence provides a favorable opportunity for the early detection of transient or permanent myocardial damage. Further studies of TRASSI for its robustness against specific cardiac arrhythmias and a comprehensive comparison with the already established MOLLI method could further confirm the everyday practicality of TRASSI and pave the way into clinical routine. The already available positive results of TRASSI suggest this method to be well suited as a non-invasive diagnostic technique for various heart diseases. From the experiments available, it can be concluded that, compared to existing techniques like MOLLI, TRASSI provides more accurate T1-values in a simultaneously reduced measurement time. This positions TRASSI particularly suitable for severely ill patients with distinctive arrhythmias and/or reduced breath-hold capabilities. In addition, TRASSI is better suited for high field MR examinations than corresponding bSSFPbased methods such as MOLLI. This is because TRASSI is a gradient echo-based imaging method and thus it has a lower specific absorption rate. Gradient echo-based sequences are also generally less sensitive to susceptibility artifacts and thus interferences caused by metallic implants of correspondent patients show less negative effects on image quality. In the current work an exact T1-thermometry sequence as well as a very fast and accurate cardiac T1-mapping method was presented. For future work, it is desirable to combine these two sequences and their mechanisms to be able to perform accurate temperature quantification in the beating heart. This would be on the one hand beneficial for MR-safety examinations of pacemaker electrodes in vivo, and on the other hand allow for a direct control of success during catheter ablation. Hence, a catheter ablation procedure could be performed with greatly increased spatial accuracy due to precise localization of heat development in the myocardium. Consequently, the safety and outcomes especially in complex ablations could be increased. In a first publication it could be already shown that MR-guided catheter ablation has the potential to increase procedural success in the future. This interventional technique could potentially be further improved by implementation of a real-time temperature visualization using TRASSI. In summary, two new T1-quantification methods have been developed and presented in this work, which can be reliably applied in clinical practice and which are expected to allow for new non-invasive diagnostic possibilities. The implemented sequences allow on the one hand exact temperature quantification in the myocardium and on the other hand accurate cardiac T1-mapping. Both methods promise robust and reproducible results, so that they are expected to find the way into clinical routine, helping in diagnosis and treatment of various heart diseases in the near future. KW - Kernspintomographie KW - Thermometrie KW - kardiale MRT KW - Gewebecharakterisierung KW - T1-Quantifizierung KW - cardiac MRI KW - tissue characterization KW - T1 quantification KW - Relaxationszeit Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-126582 ER - TY - THES A1 - Gerhard, Felicitas Irene Veronika T1 - Controlling structural and magnetic properties of epitaxial NiMnSb for application in spin torque devices T1 - Anpassung der strukturellen und magnetischen Eigenschaften von epitaktischem NiMnSb in Hinsicht auf die Anwendung in Spin Drehmoment Bauteilen N2 - This thesis describes the epitaxial growth of the Half-Heusler alloy NiMnSb by molecular beam epitaxy. Its structural and magnetic properties are controlled by tuning the composition and the resulting small deviation from stoichiometry. The magnetic in-plane anisotropy depends on the Mn concentration of the sample and can be controlled in both strength and orientation. This control of the magnetic anisotropy allows for growing NiMnSb layers of a given thickness and magnetic properties as requested for the design of NiMnSb-based devices. The growth and characterization of NiMnSb-ZnTe-NiMnSb heterostructures is presented - such heterostructures form an all-NiMnSb based spin-valve and are a promising basis for spin torque devices. N2 - Diese Arbeit beschreibt das epitaktische Wachstum der Halb-Heusler Legierung NiMnSb mittels Molekularstrahl Epitaxie. Durch Abstimmen der Zusammensetzung und einer daraus folgenden geringen Abweichung der Stöchiometrie werden die strukturellen und magnetischen Eigenschaften gesteuert. Die magnetische Anisotropie hängt von der Mn Konzentration der Probe ab, wobei sowohl die Stärke als auch die Orientierung der Anisotropie angepasst werden kann. Die Kontrolle der magnetischen Anisotropie erlaubt das Wachstum von NiMnSb Schichten mit gegebener Dicke und magnetischen Eigenschaften, die für das Design von NiMnSb-basierten Bauteilen erforderlich sind. Das Wachstum und die Charakterisierung von NiMnSb-ZnTe-NiMnSb Heterostrukturen wird präsentiert - solche Heterostrukturen bilden ein rein NiMnSb-basiertes Spinventil und sind eine vielversprechende Basis für Spin Drehmoment Bauteile. KW - Nickelverbindungen KW - Manganverbindungen KW - Half Heusler alloy NiMnSb KW - molecular beam epitaxy KW - magnetic anisotropy KW - spin valve KW - spin torque device KW - Halb-Heusler Legierung NiMnSb KW - Molekularstrahl Epitaxie KW - Magnetische Anisotropie KW - Spinventil KW - Spindrehmoment Bauteil KW - Antimonverbindungen KW - Heterostruktur KW - Molekularstrahlepitaxie KW - Heuslersche Legierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-111690 ER - TY - THES A1 - Tran-Gia, Johannes T1 - Model-Based Reconstruction Methods for MR Relaxometry T1 - Modellbasierte Rekonstruktionsmethoden für die MR-Relaxometrie N2 - In this work, a model-based acceleration of parameter mapping (MAP) for the determination of the tissue parameter T1 using magnetic resonance imaging (MRI) is introduced. The iterative reconstruction uses prior knowledge about the relaxation behavior of the longitudinal magnetization after a suitable magnetization preparation to generate a series of fully sampled k-spaces from a strongly undersampled acquisition. A Fourier transform results in a spatially resolved time course of the longitudinal relaxation process, or equivalently, a spatially resolved map of the longitudinal relaxation time T1. In its fastest implementation, the MAP algorithm enables the reconstruction of a T1 map from a radial gradient echo dataset acquired within only a few seconds after magnetization preparation, while the acquisition time of conventional T1 mapping techniques typically lies in the range of a few minutes. After validation of the MAP algorithm for two different types of magnetization preparation (saturation recovery & inversion recovery), the developed algorithm was applied in different areas of preclinical and clinical MRI and possible advantages and disadvantages were evaluated. N2 - Im Rahmen dieser Arbeit wurde ein modellbasiertes Verfahren namens MAP (engl. Model-based Acceleration of Parameter mapping) für die Bestimmung des T1-Gewebeparameters mittels Magnetresonanztomographie (MRT) entwickelt. Dieser iterative Algorithmus verwendet das Vorwissen über den nach einer Magnetisierungspräparation zu erwartenden Signalverlauf, um aus einer im Anschluss an eine initiale Präparation aufgenommene zeitliche Serie stark unterabgetasteter k-Räume eine Serie voll abgetasteter k-Räume zu generieren.Eine Fourier-Transformation dieser Serie in den Bildraum zeigt den örtlich aufgelösten zeitlichen Verlauf der longitudinalen Relaxation, was eine Kartierung des Gewebeparameters T1 ermöglicht. In seiner schnellsten Form ermöglicht dieses Verfahren die Rekonstruktion einer T1-Karte aus einem innerhalb weniger Sekunden nach einer passenden Magnetisierungspräparation aufgenommenen radialen Gradienten-Echo-Datensatz, während die Messdauer herkömmlich verwendeter T1-Bestimmungstechniken üblicherweise im Bereich von einigen Minuten liegt. Nach der Validierung des MAP-Algorithmus für zwei unterschiedliche Arten der Magnetisierungspräparation (Sättigungspräparation, Inversion) wurde die entwickelte Technik im Rahmen dieser Arbeit in verschiedenen Bereichen der präklinischen und klinischen MRT angewendet und mögliche Vor- und Nachteile untersucht. KW - Kernspintomographie KW - Radiologische Diagnostik KW - Bildgebendes Verfahren KW - Magnetic Resonance Relaxometry KW - Magnetresonanz-Relaxometrie KW - Model Based Reconstruction Algorithms in Magnetic Resonance Imaging KW - Modellbasierte-Rekonstruktionsalgorithmen in der Magnetresonanztomografie KW - Relaxation Parameter Mapping in Magnetic Resonance Imaging KW - Bestimmung des Relaxations-Parameters in der Magnetresonanztomografie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-109774 ER - TY - JOUR A1 - Amthor, Matthias A1 - Weißenseel, Sebastian A1 - Fischer, Julian A1 - Kamp, Martin A1 - Schneider, Christian A1 - Höfling, Sven T1 - Electro-optical switching between polariton and cavity lasing in an InGaAs quantum well microcavity N2 - We report on the condensation of microcavity exciton polaritons under optical excitation in a microcavity with four embedded InGaAs quantum wells. The polariton laser is characterized by a distinct nonlinearity in the input-output-characteristics, which is accompanied by a drop of the emission linewidth indicating temporal coherence and a characteristic persisting emission blueshift with increased particle density. The temporal coherence of the device at threshold is underlined by a characteristic drop of the second order coherence function to a value close to 1. Furthermore an external electric field is used to switch between polariton regime, polariton condensate and photon lasing. KW - Quantum-well, -wire and -dot devices KW - Scattering KW - stimulated KW - Resonators KW - Microcavity devices Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-111130 ER - TY - JOUR A1 - Fiedler, Sebastian A1 - El-Kareh, Lydia A1 - Eremeev, Sergey V. A1 - Tereshchenko, Oleg E. A1 - Seibel, Christoph A1 - Lutz, Peter A1 - Kokh, Konstantin A. A1 - Chulkov, Evgueni V. A1 - Kuznetsova, Tatyana V. A1 - Grebennikov, Vladimir I. A1 - Bentmann, Hendrik A1 - Bode, Matthias A1 - Reinert, Friedrich T1 - Defect and structural imperfection effects on the electronic properties of BiTeI surfaces JF - New Journal of Physics N2 - The surface electronic structure of the narrow-gap seminconductor BiTeI exhibits a large Rashba-splitting which strongly depends on the surface termination. Here we report on a detailed investigation of the surface morphology and electronic properties of cleaved BiTeI single crystals by scanning tunneling microscopy, photoelectron spectroscopy (ARPES, XPS), electron diffraction (SPA-LEED) and density functional theory calculations. Our measurements confirm a previously reported coexistence of Te- and I-terminated surface areas originating from bulk stacking faults and find a characteristic length scale of ~100 nm for these areas. We show that the two terminations exhibit distinct types of atomic defects in the surface and subsurface layers. For electronic states resided on the I terminations we observe an energy shift depending on the time after cleavage. This aging effect is successfully mimicked by depositon of Cs adatoms found to accumulate on top of the I terminations. As shown theoretically on a microscopic scale, this preferential adsorbing behaviour results from considerably different energetics and surface diffusion lengths at the two terminations. Our investigations provide insight into the importance of structural imperfections as well as intrinsic and extrinsic defects on the electronic properties of BiTeI surfaces and their temporal stability. KW - electronic structure KW - spin–orbit coupling KW - surface morphology KW - semiconductor surfaces Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119467 SN - 1367-2630 VL - 16 IS - 075013 ER - TY - JOUR A1 - Lüftner, Daniel A1 - Milko, Matus A1 - Huppmann, Sophia A1 - Scholz, Markus A1 - Ngyuen, Nam A1 - Wießner, Michael A1 - Schöll, Achim A1 - Reinert, Friedrich A1 - Puschnig, Peter T1 - CuPc/Au(1 1 0): Determination of the azimuthal alignment by a combination of angle-resolved photoemission and density functional theory JF - Journal of Electron Spectroscopy and Related Phenomena N2 - Here we report on a combined experimental and theoretical study on the structural and electronic properties of a monolayer of Copper-Phthalocyanine (CuPc) on the Au(1 1 0) surface. Low-energy electron diffraction reveals a commensurate overlayer unit cell containing one adsorbate species. The azimuthal alignment of the CuPc molecule is revealed by comparing experimental constant binding energy (kxky)-maps using angle-resolved photoelectron spectroscopy with theoretical momentum maps of the free molecule's highest occupied molecular orbital (HOMO). This structural information is confirmed by total energy calculations within the framework of van-der-Waals corrected density functional theory. The electronic structure is further analyzed by computing the molecule-projected density of states, using both a semi-local and a hybrid exchange-correlation functional. In agreement with experiment, the HOMO is located about 1.2 eV below the Fermi-level, while there is no significant charge transfer into the molecule and the CuPc LUMO remains unoccupied on the Au(1 1 0) surface. KW - density functional theory KW - angle-resolved photoemission spectroscopy KW - organic molecule KW - organic–metal interface Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-120986 SN - 0368-2048 VL - 195 ER - TY - JOUR A1 - Tvingstedt, Kristofer A1 - Malinkiewicz, Olga A1 - Baumann, Andreas A1 - Deibel, Carsten A1 - Snaith, Henry J. A1 - Dyakonov, Vladimir A1 - Bolink, Henk J. T1 - Radiative efficiency of lead iodide based perovskite solar cells JF - Scientific Reports N2 - The maximum efficiency of any solar cell can be evaluated in terms of its corresponding ability to emit light. We herein determine the important figure of merit of radiative efficiency for Methylammonium Lead Iodide perovskite solar cells and, to put in context, relate it to an organic photovoltaic (OPV) model device. We evaluate the reciprocity relation between electroluminescence and photovoltaic quantum efficiency and conclude that the emission from the perovskite devices is dominated by a sharp band-to-band transition that has a radiative efficiency much higher than that of an average OPV device. As a consequence, the perovskite have the benefit of retaining an open circuit voltage ~0.14 V closer to its radiative limit than the OPV cell. Additionally, and in contrast to OPVs, we show that the photoluminescence of the perovskite solar cell is substantially quenched under short circuit conditions in accordance with how an ideal photovoltaic cell should operate. KW - solar cells KW - optical spectroscopy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119360 VL - 4 ER - TY - JOUR A1 - Baumann, A. A1 - Tvingstedt, K. A1 - Heiber, M. C. A1 - Väth, S. A1 - Momblona, C. A1 - Bolink, H. J. A1 - Dyakonov, V. T1 - Persistent photovoltage in methylammonium lead iodide perovskite solar cells JF - APL Materials N2 - We herein perform open circuit voltage decay (OCVD) measurements on methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells to increase the understanding of the charge carrier recombination dynamics in this emerging technology. Optically pulsed OCVD measurements are conducted on CH3NH3PbI3 solar cells and compared to results from another type of thin-film photovoltaics, namely, the two reference polymer–fullerene bulk heterojunction solar cell devices based on P3HT:PC60BM and PTB7:PC70BM blends. We observe two very different time domains of the voltage transient in the perovskite solar cell with a first drop on a short time scale that is similar to the decay in the studied organic solar cells. However, 65%–70% of the maximum photovoltage persists on much longer timescales in the perovskite solar cell than in the organic devices. In addition, we find that the recombination dynamics in all time regimes are dependent on the starting illumination intensity, which is also not observed in the organic devices. We then discuss the potential origins of these unique behaviors. KW - solar cells KW - illumination KW - dielectric oxides KW - carrier density KW - bioelectrochemistry Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119397 VL - 2 IS - 8 ER -