TY - JOUR A1 - Scorcelletti, Matteo A1 - Kara, Serhan A1 - Zange, Jochen A1 - Jordan, Jens A1 - Semler, Oliver A1 - Schönau, Eckhard A1 - Rittweger, Jörn A1 - Ireland, Alex A1 - Seefried, Lothar T1 - Lower limb bone geometry in adult individuals with X-linked hypophosphatemia: an observational study JF - Osteoporosis International N2 - Summary We assessed lower-limb geometry in adults with X-linked hypophosphatemia (XLH) and controls. We found large differences in multiple measures including femoral and tibial torsion, bowing and cross-sectional area and acetabular version and coverage which may contribute to clinical problems such as osteoarthritis, fractures and altered gait common in XLH. Purpose Individuals with X-linked hypophosphatemia (XLH) are at risk of lower-limb deformities and early onset of osteoarthritis. These two factors may be linked, as altered biomechanics is a risk factor for osteoarthritis. This exploratory evaluation aims at providing clues and concepts for this association to facilitate future larger-scale and longitudinal studies on that aspect. Methods For this observational study, 13 patients with XLH, aged 18–65 years (6 female), were compared with sex-, age- and weight-matched healthy individuals at a single German research centre. Femoral and hip joint geometry, including femoral and tibial torsion and femoral and tibial shaft bowing, bone cross-sectional area (CSA) and acetabular version and coverage were measured from magnetic resonance imaging (MRI) scans. Results Total femoral torsion was 29° lower in individuals with XLH than in controls (p < 0.001), mainly resulting from lower intertrochanteric torsion (ITT) (p < 0.001). Femoral lateral and frontal bowing, tibial frontal bowing, mechanical axis, femoral mechanical–anatomical angle, acetabular version and acetabular coverage were all greater and tibial torsion lower in individuals with XLH as compared to controls (all p < 0.05). Greater femoral total and marrow cavity CSA, greater tibial marrow cavity CSA and lower cortical CSA were observed in XLH (all p < 0.05). Discussion We observed large differences in clinically relevant measures of tibia and particularly femur bone geometry in individuals with XLH compared to controls. These differences may plausibly contribute to clinical manifestations of XLH such as early-onset osteoarthritis, pseudofractures and altered gait and therefore should be considered when planning corrective surgeries. KW - bone KW - femur KW - geometry KW - shape KW - XLH Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-324655 VL - 33 IS - 7 ER - TY - JOUR A1 - Stratos, Ioannis A1 - Rinas, Ingmar A1 - Schröpfer, Konrad A1 - Hink, Katharina A1 - Herlyn, Philipp A1 - Bäumler, Mario A1 - Histing, Tina A1 - Bruhn, Sven A1 - Müller-Hilke, Brigitte A1 - Menger, Michael D. A1 - Vollmar, Brigitte A1 - Mittlmeier, Thomas T1 - Effects on bone and muscle upon treadmill interval training in hypogonadal male rats JF - Biomedicines N2 - Testosterone deficiency in males is linked to various pathological conditions, including muscle and bone loss. This study evaluated the potential of different training modalities to counteract these losses in hypogonadal male rats. A total of 54 male Wistar rats underwent either castration (ORX, n = 18) or sham castration (n = 18), with 18 castrated rats engaging in uphill, level, or downhill interval treadmill training. Analyses were conducted at 4, 8, and 12 weeks postsurgery. Muscle force of the soleus muscle, muscle tissue samples, and bone characteristics were analyzed. No significant differences were observed in cortical bone characteristics. Castrated rats experienced decreased trabecular bone mineral density compared to sham-operated rats. However, 12 weeks of training increased trabecular bone mineral density, with no significant differences among groups. Muscle force measurements revealed decreased tetanic force in castrated rats at week 12, while uphill and downhill interval training restored force to sham group levels and led to muscle hypertrophy compared to ORX animals. Linear regression analyses showed a positive correlation between bone biomechanical characteristics and muscle force. The findings suggest that running exercise can prevent bone loss in osteoporosis, with similar bone restoration effects observed across different training modalities. KW - osteoporosis KW - muscle KW - force KW - bone KW - micro-CT KW - training Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-319266 SN - 2227-9059 VL - 11 IS - 5 ER - TY - JOUR A1 - Altieri, Barbara A1 - Di Dato, Carla A1 - Modica, Roberta A1 - Bottiglieri, Filomena A1 - Di Sarno, Antonella A1 - Pittaway, James F.H. A1 - Martini, Chiara A1 - Faggiano, Antongiulio A1 - Colao, Annamaria T1 - Bone metabolism and vitamin D implication in gastroenteropancreatic neuroendocrine tumors JF - Nutrients N2 - Patients affected by gastroenteropancreatic–neuroendocrine tumors (GEP–NETs) have an increased risk of developing osteopenia and osteoporosis, as several factors impact on bone metabolism in these patients. In fact, besides the direct effect of bone metastasis, bone health can be affected by hormone hypersecretion (including serotonin, cortisol, and parathyroid hormone-related protein), specific microRNAs, nutritional status (which in turn could be affected by medical and surgical treatments), and vitamin D deficiency. In patients with multiple endocrine neoplasia type 1 (MEN1), a hereditary syndrome associated with NET occurrence, bone damage may carry other consequences. Osteoporosis may negatively impact on the quality of life of these patients and can increment the cost of medical care since these patients usually live with their disease for a long time. However, recommendations suggesting screening to assess bone health in GEP–NET patients are missing. The aim of this review is to critically analyze evidence on the mechanisms that could have a potential impact on bone health in patients affected by GEP–NET, focusing on vitamin D and its role in GEP–NET, as well as on factors associated with MEN1 that could have an impact on bone homeostasis. KW - bone KW - vitamin D KW - neuroendocrine tumor KW - osteoporosis KW - mineral bone density KW - cortisol KW - serotonin KW - miRNA KW - MEN1 KW - therapy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203823 SN - 2072-6643 VL - 12 IS - 4 ER - TY - JOUR A1 - Herrmann, Marietta A1 - Engelke, Klaus A1 - Ebert, Regina A1 - Müller-Deubert, Sigrid A1 - Rudert, Maximilian A1 - Ziouti, Fani A1 - Jundt, Franziska A1 - Felsenberg, Dieter A1 - Jakob, Franz T1 - Interactions between muscle and bone — Where physics meets biology JF - Biomolecules N2 - Muscle and bone interact via physical forces and secreted osteokines and myokines. Physical forces are generated through gravity, locomotion, exercise, and external devices. Cells sense mechanical strain via adhesion molecules and translate it into biochemical responses, modulating the basic mechanisms of cellular biology such as lineage commitment, tissue formation, and maturation. This may result in the initiation of bone formation, muscle hypertrophy, and the enhanced production of extracellular matrix constituents, adhesion molecules, and cytoskeletal elements. Bone and muscle mass, resistance to strain, and the stiffness of matrix, cells, and tissues are enhanced, influencing fracture resistance and muscle power. This propagates a dynamic and continuous reciprocity of physicochemical interaction. Secreted growth and differentiation factors are important effectors of mutual interaction. The acute effects of exercise induce the secretion of exosomes with cargo molecules that are capable of mediating the endocrine effects between muscle, bone, and the organism. Long-term changes induce adaptations of the respective tissue secretome that maintain adequate homeostatic conditions. Lessons from unloading, microgravity, and disuse teach us that gratuitous tissue is removed or reorganized while immobility and inflammation trigger muscle and bone marrow fatty infiltration and propagate degenerative diseases such as sarcopenia and osteoporosis. Ongoing research will certainly find new therapeutic targets for prevention and treatment. KW - muscle KW - bone KW - mechanosensing KW - mechanotransduction KW - myokines KW - osteokines adaptation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203399 SN - 2218-273X VL - 10 IS - 3 ER - TY - JOUR A1 - Paudel, Rupesh A1 - Fusi, Lorenza A1 - Schmidt, Marc T1 - The MEK5/ERK5 pathway in health and disease JF - International Journal of Molecular Sciences N2 - The MEK5/ERK5 mitogen-activated protein kinases (MAPK) cascade is a unique signaling module activated by both mitogens and stress stimuli, including cytokines, fluid shear stress, high osmolarity, and oxidative stress. Physiologically, it is mainly known as a mechanoreceptive pathway in the endothelium, where it transduces the various vasoprotective effects of laminar blood flow. However, it also maintains integrity in other tissues exposed to mechanical stress, including bone, cartilage, and muscle, where it exerts a key function as a survival and differentiation pathway. Beyond its diverse physiological roles, the MEK5/ERK5 pathway has also been implicated in various diseases, including cancer, where it has recently emerged as a major escape route, sustaining tumor cell survival and proliferation under drug stress. In addition, MEK5/ERK5 dysfunction may foster cardiovascular diseases such as atherosclerosis. Here, we highlight the importance of the MEK5/ERK5 pathway in health and disease, focusing on its role as a protective cascade in mechanical stress-exposed healthy tissues and its function as a therapy resistance pathway in cancers. We discuss the perspective of targeting this cascade for cancer treatment and weigh its chances and potential risks when considering its emerging role as a protective stress response pathway. KW - atherosclerosis KW - bone KW - cartilage KW - endothelium KW - extracellular-regulated kinase 5 KW - Krüppel-like factor KW - mechanotransduction KW - mitogen-activated protein kinase KW - stress signaling KW - tumor Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-261638 SN - 1422-0067 VL - 22 IS - 14 ER - TY - JOUR A1 - Pereira, A. R. A1 - Trivanović, D. A1 - Herrmann, M. T1 - Approaches to mimic the complexity of the skeletal mesenchymal stem/stromal cell niche in vitro JF - European Cells and Materials N2 - Mesenchymal stem/stromal cells (MSCs) are an essential element of most modern tissue engineering and regenerative medicine approaches due to their multipotency and immunoregulatory functions. Despite the prospective value of MSCs for the clinics, the stem cells community is questioning their developmental origin, in vivo localization, identification, and regenerative potential after several years of far-reaching research in the field. Although several major progresses have been made in mimicking the complexity of the MSC niche in vitro, there is need for comprehensive studies of fundamental mechanisms triggered by microenvironmental cues before moving to regenerative medicine cell therapy applications. The present comprehensive review extensively discusses the microenvironmental cues that influence MSC phenotype and function in health and disease – including cellular, chemical and physical interactions. The most recent and relevant illustrative examples of novel bioengineering approaches to mimic biological, chemical, and mechanical microenvironmental signals present in the native MSC niche are summarized, with special emphasis on the forefront techniques to achieve bio-chemical complexity and dynamic cultures. In particular, the skeletal MSC niche and applications focusing on the bone regenerative potential of MSC are addressed. The aim of the review was to recognize the limitations of the current MSC niche in vitro models and to identify potential opportunities to fill the bridge between fundamental science and clinical application of MSCs. KW - Mesenchymal stem/stromal cells KW - skeletal progenitor cells KW - niche KW - in vitro models KW - bone KW - tissue engineering Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-268823 SN - 1473-2262 VL - 37 ER - TY - JOUR A1 - Fuchs, Konrad F. A1 - Heilig, Philipp A1 - McDonogh, Miriam A1 - Boelch, Sebastian A1 - Gbureck, Uwe A1 - Meffert, Rainer H. A1 - Hoelscher-Doht, Stefanie A1 - Jordan, Martin C. T1 - Cement-augmented screw fixation for calcaneal fracture treatment: a biomechanical study comparing two injectable bone substitutes JF - Journal of Orthopaedic Surgery and Research N2 - Background The role of cement-augmented screw fixation for calcaneal fracture treatment remains unclear. Therefore, this study was performed to biomechanically analyze screw osteosynthesis by reinforcement with either a calcium phosphate (CP)-based or polymethylmethacrylate (PMMA)-based injectable bone cement. Methods A calcaneal fracture (Sanders type IIA) including a central cancellous bone defect was generated in 27 synthetic bones, and the specimens were assigned to 3 groups. The first group was fixed with four screws (3.5 mm and 6.5 mm), the second group with screws and CP-based cement (Graftys (R) QuickSet; Graftys, Aix-en-Provence, France), and the third group with screws and PMMA-based cement (Traumacem (TM) V+; DePuy Synthes, Warsaw, IN, USA). Biomechanical testing was conducted to analyze peak-to-peak displacement, total displacement, and stiffness in following a standardized protocol. Results The peak-to-peak displacement under a 200-N load was not significantly different among the groups; however, peak-to-peak displacement under a 600- and 1000-N load as well as total displacement exhibited better stability in PMMA-augmented screw osteosynthesis compared to screw fixation without augmentation. The stiffness of the construct was increased by both CP- and PMMA-based cements. Conclusion Addition of an injectable bone cement to screw osteosynthesis is able to increase fixation strength in a biomechanical calcaneal fracture model with synthetic bones. In such cases, PMMA-based cements are more effective than CP-based cements because of their inherently higher compressive strength. However, whether this high strength is required in the clinical setting for early weight-bearing remains controversial, and the non-degradable properties of PMMA might cause difficulties during subsequent interventions in younger patients. KW - arthritis KW - bone KW - calcaneus KW - cement KW - fracture KW - fixation KW - osteoporosis KW - sanders KW - screw Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-230336 VL - 15 ER - TY - THES A1 - Koschitzki, Kim Christine Cornelia T1 - Evaluation of preclinical animal models in bone tissue engineering and their success in clinical translation T1 - Evaluierung von vorklinischen Tiermodellen für Bone Tissue Engineering und von ihrem Erfolg in der klinischen Umsetzung N2 - Autologous bone still represents today’s gold standard for the treatment of critical size bone defects and fracture non-unions despite associated disadvantages regarding limitations in availability, donor site morbidity, costs and efficacy. Bone tissue engineered constructs would present a promising alternative to currently available treatments. However, research on preclinical animal studies still fails to provide clinical applicable results able to allow the replacement of currently applied methods. It seems that the idea of bone tissue engineering, which has now been integral part of academic studies for over 30 years, got somehow stuck at an intermediate level, in between intense preclinical research and striven stages of initial clinical trial phases. A clear discrepancy exists between the number of studies with preclinical animal models for bone tissue engineering and the number of clinically approved bone tissue engineered constructs available to patients. The aim of this thesis was hence to evaluate preclinical animal models for bone tissue engineering as well as the perception of scientists and clinicians towards these models. Moreover, the general role of bone tissue engineering and its clinical need assessed by scientists and surgeons was investigated. A survey was conducted questioning both scientific and clinical opinions on currently available study designs and researchers’ satisfaction with preclinical animal models. Additionally, a literature research was conducted, resulting in 167 papers from the last 10 years that report current designs of preclinical orthotopic animal studies in bone tissue engineering. Thereby, the focus lied on the description of the models regarding animal species, strain, age, gender and defect design. The outcome of the literature search was evaluated and compared to the outcome obtained from the survey. The survey data revealed that both scientists and surgeons generally remain positive about the future role of bone tissue engineering and its step to clinical translation, at least in the distant future, where it then might replace the current gold standard, autologous bone. Moreover, most of the participants considered preclinical animal models as relevant and well developed but the results as not yet realizable in the clinics. Surgeons thereby demonstrated a slightly more optimistic perception of currently conducted research with animal models compared to scientists. However, a rather inconsistent description of present preclinical study designs could be discerned when evaluating the reported study designs in the survey and the papers of the literature search. Indeed, defining an appropriate animal species, strain, age, gender, observation time, observation method and surgical design often depends on different indications and research questions and represents a highly challenging task for the establishment of a preclinical animal model. The existing lack of valid guidelines for preclinical testing of bone tissue engineering leads hence to a lack of well standardized preclinical animal models. Moreover, still existing knowledge gaps regarding aspects that affect the process of fracture healing, such as vascularization or immunological aspects, were found to hinder clinical translation of bone tissue engineered constructs. Using literature review and survey, this thesis points out critical issues that need to be addressed to allow clinical translation of bone tissue engineered constructs. It can be concluded that currently existing study designs with preclinical animal models cannot live up to the claim of providing suitable results for clinical implementation. The here presented comprehensive summary of currently used preclinical animal models for bone tissue engineering reveals a missing consensus on the usage of models such as an apparent lack of reporting and standardization regarding the study designs described in both papers from the literature review and the survey. It thereby indicates a crucial need to improve preclinical animal models in order to allow clinical translation. Despite the fact that participants of the survey generally revealed a positive perception towards the use of bone tissue engineered constructs and affirmed the clinical need for such novel designs, the missing standardization constitutes a main weak point for the provision of reliable study outcome and the translational success of the models. The optimization of reproducibility and reliability, as well as the further understanding of ongoing mechanisms in bone healing in order to develop effective tissue engineered constructs, need to form the basis of all study designs. The study outcomes might then fulfill the requirements of maybe today's and hopefully tomorrow's aging population. N2 - Über die letzten 30 Jahre hat die Rolle von Bone Tissue Engineering vielversprechenden Fortschritt gemacht und immer neue Ansätze werden etabliert. Somit stellt Bone Tissue Engineering eine aussichtsvolle Alternative zu dem heutigen Goldstandard (autogene Knochenersatzmaterialien) dar, nachdem diese häufig mit Nachteilen einhergehen: limitierte Verfügbarkeit, Morbidität durch Zweiteingriffe, ungenügend Stabilität und Kosten. Die klinische Umsetzung findet jedoch nicht so schnell statt, wie ursprünglich erhofft und es scheint, als würde die vorklinische Forschung auf der Stelle treten. Das Ausbleiben von reproduzierbaren und standardisierten vorklinischen Studien verhindert dabei eine "bench to bedside" Translation. Ziel dieser Doktorarbeit war es, derzeitige präklinische Tiermodelle für Bone Tissue Engineering zu evaluieren und dabei zu untersuchen, woran es liegen könnte, dass die Lücke zwischen vorklinischen Studienergebnissen und klinischer Umsetzung noch immer existiert. Es wurde ein Fragebogen erstellt, anhand dessen die generelle Meinung gegenüber Bone Tissue Engineering und die Effizienz derzeitiger präklinischer Studienmodelle aus sowohl klinischer, als auch wissenschaftlicher Sicht hinterfragt wurde. Hier wurde außerdem auf die Beurteilung der Zufriedenstellung solcher Modelle seitens der Forscher eingegangen. Darüber hinaus erfolgte eine systemische Literatursuche auf der Online-Plattform “Pubmed” mit dem Ziel Studien der letzten zehn Jahre über präklinische orthotopische Tiermodelle in Bone Tissue Engineering zusammenzufassen und die verschiedenen Studiendesigns zu evaluieren. Der Fokus lag dabei auf der Beschreibung der Tiermodelle bezüglich Tierart, Geschlecht, Alter und Defektdesign. Ergebnisse der Literatursuche wurden anschließend evaluiert und mit den Antworten aus dem Fragebogen verglichen und diskutiert. Es hat sich anhand des Fragebogens gezeigt, dass sowohl Wissenschaftler, als auch Chirurgen positiv gestimmt sind, was die zukünftige Anwendung von Bone Tissue Engineering in den Kliniken betrifft. Jedoch beurteilten die meisten Teilnehmer des Fragebogens die präklinischen Tiermodelle zwar als relevant und gut entwickelt, deren Ergebnisse als klinisch allerdings nicht anwendbar. Dabei fiel die Einschätzung präklinischer Forschung mit Tiermodellen unter den Chirurgen etwas optimistischer aus als unter den Forschern. Die Evaluierung der Studien aus dem Fragebogens und der Literatursuche zeigte jedoch auch, dass die darin beschriebenen Tiermodelle einen eher uneinheitlichen Studienaufbau aufweisen. Tatsächlich stellt die Etablierung eines fundierten Studiendesigns im Anbetracht der zahlreichen Möglichkeiten eine immense Herausforderung dar. Die Festlegung eines Versuchsaufbaus hängt dabei von der Wahl der Tierart, dessen Geschlecht und Alter, des chirurgischen Ablaufs, sowie der technischen und zeitlichen Beobachtungsmöglichkeit ab. Es stellte sich heraus, dass für viele Studien eine diesbezüglich notwendige Standardisierung kaum existiert und dadurch Studienergebnisse entstehen, die schwer reproduzierbar sind und somit den Ansprüchen einer klinischen Umsetzung nicht gerecht werden können. Hinzu kommen außerdem die noch immer bestehenden Wissenslücken in Bezug auf Knochenheilung beeinflussende Faktoren wie Vaskularisation und Abläufe des Immunsystems. Abschließend lässt sich sagen, dass die durchgeführte Evaluierung von Studien mit präklinischen Tiermodellen eine fehlende Standardisierung derzeit existierender Studiendesigns darlegt und eine klinische Umsetzung der daraus resultierenden Studienergebnissen somit noch nicht möglich ist. Auch wenn die Teilnehmer des Fragebogens den Bedarf an neuen, klinisch anerkannten Methoden für Knochenaufbauten nahelegten und eine generell positive Einstellung gegenüber dem potentiellen Gebrauch von Bone Tissue Engineering Konstrukte in den Kliniken zeigten, ist die Ablösung von autologem Knochen durch solch neuartige Designs nicht realisierbar, solange die Reproduzierbarkeit der Daten aus präklinischen Tiermodellstudien fehlt. Zusammen mit wegweisenden Richtlinien und fundiertem Wissen über grundliegende Mechanismen im Knochenheilungsprozess, sollte sie die Basis eines jeden Studienaufbaus mit präklinischen Tiermodellen darstellen, um schließlich zu den Ergebnissen zu gelangen, die es für eine klinische Umsetzung von Bone Tissue Engineering bedarf. KW - bone KW - tissue KW - engineering Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207593 ER - TY - JOUR A1 - Kollmannsberger, Philip A1 - Kerschnitzki, Michael A1 - Repp, Felix A1 - Wagermaier, Wolfgang A1 - Weinkamer, Richard A1 - Fratzl, Peter T1 - The small world of osteocytes: connectomics of the lacuno-canalicular network in bone JF - New Journal of Physics N2 - Osteocytes and their cell processes reside in a large, interconnected network of voids pervading the mineralized bone matrix of most vertebrates. This osteocyte lacuno-canalicular network (OLCN) is believed to play important roles in mechanosensing, mineral homeostasis, and for the mechanical properties of bone. While the extracellular matrix structure of bone is extensively studied on ultrastructural and macroscopic scales, there is a lack of quantitative knowledge on how the cellular network is organized. Using a recently introduced imaging and quantification approach, we analyze the OLCN in different bone types from mouse and sheep that exhibit different degrees of structural organization not only of the cell network but also of the fibrous matrix deposited by the cells. We define a number of robust, quantitative measures that are derived from the theory of complex networks. These measures enable us to gain insights into how efficient the network is organized with regard to intercellular transport and communication. Our analysis shows that the cell network in regularly organized, slow-growing bone tissue from sheep is less connected, but more efficiently organized compared to irregular and fast-growing bone tissue from mice. On the level of statistical topological properties (edges per node, edge length and degree distribution), both network types are indistinguishable, highlighting that despite pronounced differences at the tissue level, the topological architecture of the osteocyte canalicular network at the subcellular level may be independent of species and bone type. Our results suggest a universal mechanism underlying the self-organization of individual cells into a large, interconnected network during bone formation and mineralization. KW - bone KW - osteocytes KW - networks KW - biomaterials KW - mechanobiology KW - image analysis Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-170662 VL - 19 IS - 073019 ER - TY - THES A1 - Rücker, Christoph T1 - Development of a prevascularized bone implant T1 - Entwicklung eines prävaskularisierten Knochenimplantats N2 - The skeletal system forms the mechanical structure of the body and consists of bone, which is hard connective tissue. The tasks the skeleton and bones take over are of mechanical, metabolic and synthetic nature. Lastly, bones enable the production of blood cells by housing the bone marrow. Bone has a scarless self-healing capacity to a certain degree. Injuries exceeding this capacity caused by trauma, surgical removal of infected or tumoral bone or as a result from treatment-related osteonecrosis, will not heal. Critical size bone defects that will not heal by themselves are still object of comprehensive clinical investigation. The conventional treatments often result in therapies including burdening methods as for example the harvesting of autologous bone material. The aim of this thesis was the creation of a prevascularized bone implant employing minimally invasive methods in order to minimize inconvenience for patients and surgical site morbidity. The basis for the implant was a decellularized, naturally derived vascular scaffold (BioVaSc-TERM®) providing functional vessel structures after reseeding with autologous endothelial cells. The bone compartment was built by the combination of the aforementioned scaffold with synthetic β-tricalcium phosphate. In vitro culture for tissue maturation was performed using bioreactor technology before the testing of the regenerative potential of the implant in large animal experiments in sheep. A tibia defect was treated without the anastomosis of the implant’s innate vasculature to the host’s circulatory system and in a second study, with anastomosis of the vessel system in a mandibular defect. While the non-anastomosed implant revealed a mostly osteoconductive effect, the implants that were anastomosed achieved formation of bony islands evenly distributed over the defect. In order to prepare preconditions for a rapid approval of an implant making use of this vascularization strategy, the manufacturing of the BioVaSc-TERM® as vascularizing scaffold was adjusted to GMP requirements. N2 - Das Skelett bildet die mechanische Struktur des Körpers und besteht aus Knochen, einem harten Bindegewebe. Knochen übernehmen mechanische, metabolische und synthetische Aufgaben. Schlussendlich ermöglichen Knochen die Synthese von Blutzellen durch die Beherbergung des Knochenmarks. Wird die Heilungskapazität von Knochen durch Trauma, operative Entfernung von infiziertem oder tumorösem Knochen oder als Ergebnis behandlungsbedingter Osteonekrose, überschritten, findet keine vollständige Heilung statt. Knochendefekte, die eine kritische Größe überschreiten, sind daher immer noch Gegenstand umfangreicher, klinischer Forschung. Bei herkömmlichen Behandlungsmethoden können Eingriffe notwendig werden, die den Patienten belasten, wie bei der Gewinnung von autologem Knochenmaterial. Das Ziel der vorliegenden Arbeit war die Herstellung eines prävaskularisierten Implantats unter Verwendung minimalinvasiver Methoden, um die Belastung von Patienten und die Morbidität an der Entnahmestelle, zu verringern. Zur Herstellung eines vaskularisierten Implantats bildete ein dezellularisiertes Darmsegment (Jejunum) porcinen Ursprungs die Grundlage (BioVasc-TERM®). Diese Trägerstruktur stellte ein funktionales Blutgefäßsystem nach Wiederbesiedelung mit autologen Endothelzellen bereit. Der Knochenanteil des Implantats wurde durch die Kombination der genannten Trägerstruktur mit dem synthetischen Knochenersatzmaterial β-Tricalciumphosphat gebildet. In-vitro-Kultivierung in einem Bioreaktor führte zur Reifung des Implantats vor der Testung seines Potenzials zur Knochenregeneration in Großtierversuchen bei Schafen. Ein Tibiadefekt wurde behandelt ohne die Anastomose des implantateigenen Gefäßsystems an den Blutkreislauf und ein Mandibeldefekt wurde mit Gefäßanschluss behandelt. Das Implantat ohne Gefäßanschluss hatte einen osteokonduktiven Effekt, während das anastomosierte Implantat zur Bildung zahlreicher Knocheninseln, gleichmäßig über den Defekt verteilt, führte. Um eine zügige Zulassung eines Implantats, das diese Strategie zur Vaskularisierung von Knochen nutzt, zu ermöglichen, wurde die Herstellung der BioVaSc-TERM® an die Vorgaben der Guten Herstellungspraxis angepasst. KW - Tissue Engineering KW - Knochenregeneration KW - Regenerative Medizin KW - Angiogenese KW - Implantat KW - bone KW - implant KW - Knochenimplantat KW - Vaskularisierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178869 ER -