TY - JOUR A1 - Scorcelletti, Matteo A1 - Kara, Serhan A1 - Zange, Jochen A1 - Jordan, Jens A1 - Semler, Oliver A1 - Schönau, Eckhard A1 - Rittweger, Jörn A1 - Ireland, Alex A1 - Seefried, Lothar T1 - Lower limb bone geometry in adult individuals with X-linked hypophosphatemia: an observational study JF - Osteoporosis International N2 - Summary We assessed lower-limb geometry in adults with X-linked hypophosphatemia (XLH) and controls. We found large differences in multiple measures including femoral and tibial torsion, bowing and cross-sectional area and acetabular version and coverage which may contribute to clinical problems such as osteoarthritis, fractures and altered gait common in XLH. Purpose Individuals with X-linked hypophosphatemia (XLH) are at risk of lower-limb deformities and early onset of osteoarthritis. These two factors may be linked, as altered biomechanics is a risk factor for osteoarthritis. This exploratory evaluation aims at providing clues and concepts for this association to facilitate future larger-scale and longitudinal studies on that aspect. Methods For this observational study, 13 patients with XLH, aged 18–65 years (6 female), were compared with sex-, age- and weight-matched healthy individuals at a single German research centre. Femoral and hip joint geometry, including femoral and tibial torsion and femoral and tibial shaft bowing, bone cross-sectional area (CSA) and acetabular version and coverage were measured from magnetic resonance imaging (MRI) scans. Results Total femoral torsion was 29° lower in individuals with XLH than in controls (p < 0.001), mainly resulting from lower intertrochanteric torsion (ITT) (p < 0.001). Femoral lateral and frontal bowing, tibial frontal bowing, mechanical axis, femoral mechanical–anatomical angle, acetabular version and acetabular coverage were all greater and tibial torsion lower in individuals with XLH as compared to controls (all p < 0.05). Greater femoral total and marrow cavity CSA, greater tibial marrow cavity CSA and lower cortical CSA were observed in XLH (all p < 0.05). Discussion We observed large differences in clinically relevant measures of tibia and particularly femur bone geometry in individuals with XLH compared to controls. These differences may plausibly contribute to clinical manifestations of XLH such as early-onset osteoarthritis, pseudofractures and altered gait and therefore should be considered when planning corrective surgeries. KW - bone KW - femur KW - geometry KW - shape KW - XLH Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-324655 VL - 33 IS - 7 ER - TY - JOUR A1 - Stratos, Ioannis A1 - Rinas, Ingmar A1 - Schröpfer, Konrad A1 - Hink, Katharina A1 - Herlyn, Philipp A1 - Bäumler, Mario A1 - Histing, Tina A1 - Bruhn, Sven A1 - Müller-Hilke, Brigitte A1 - Menger, Michael D. A1 - Vollmar, Brigitte A1 - Mittlmeier, Thomas T1 - Effects on bone and muscle upon treadmill interval training in hypogonadal male rats JF - Biomedicines N2 - Testosterone deficiency in males is linked to various pathological conditions, including muscle and bone loss. This study evaluated the potential of different training modalities to counteract these losses in hypogonadal male rats. A total of 54 male Wistar rats underwent either castration (ORX, n = 18) or sham castration (n = 18), with 18 castrated rats engaging in uphill, level, or downhill interval treadmill training. Analyses were conducted at 4, 8, and 12 weeks postsurgery. Muscle force of the soleus muscle, muscle tissue samples, and bone characteristics were analyzed. No significant differences were observed in cortical bone characteristics. Castrated rats experienced decreased trabecular bone mineral density compared to sham-operated rats. However, 12 weeks of training increased trabecular bone mineral density, with no significant differences among groups. Muscle force measurements revealed decreased tetanic force in castrated rats at week 12, while uphill and downhill interval training restored force to sham group levels and led to muscle hypertrophy compared to ORX animals. Linear regression analyses showed a positive correlation between bone biomechanical characteristics and muscle force. The findings suggest that running exercise can prevent bone loss in osteoporosis, with similar bone restoration effects observed across different training modalities. KW - osteoporosis KW - muscle KW - force KW - bone KW - micro-CT KW - training Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-319266 SN - 2227-9059 VL - 11 IS - 5 ER - TY - JOUR A1 - Herrmann, Marietta A1 - Engelke, Klaus A1 - Ebert, Regina A1 - Müller-Deubert, Sigrid A1 - Rudert, Maximilian A1 - Ziouti, Fani A1 - Jundt, Franziska A1 - Felsenberg, Dieter A1 - Jakob, Franz T1 - Interactions between muscle and bone — Where physics meets biology JF - Biomolecules N2 - Muscle and bone interact via physical forces and secreted osteokines and myokines. Physical forces are generated through gravity, locomotion, exercise, and external devices. Cells sense mechanical strain via adhesion molecules and translate it into biochemical responses, modulating the basic mechanisms of cellular biology such as lineage commitment, tissue formation, and maturation. This may result in the initiation of bone formation, muscle hypertrophy, and the enhanced production of extracellular matrix constituents, adhesion molecules, and cytoskeletal elements. Bone and muscle mass, resistance to strain, and the stiffness of matrix, cells, and tissues are enhanced, influencing fracture resistance and muscle power. This propagates a dynamic and continuous reciprocity of physicochemical interaction. Secreted growth and differentiation factors are important effectors of mutual interaction. The acute effects of exercise induce the secretion of exosomes with cargo molecules that are capable of mediating the endocrine effects between muscle, bone, and the organism. Long-term changes induce adaptations of the respective tissue secretome that maintain adequate homeostatic conditions. Lessons from unloading, microgravity, and disuse teach us that gratuitous tissue is removed or reorganized while immobility and inflammation trigger muscle and bone marrow fatty infiltration and propagate degenerative diseases such as sarcopenia and osteoporosis. Ongoing research will certainly find new therapeutic targets for prevention and treatment. KW - muscle KW - bone KW - mechanosensing KW - mechanotransduction KW - myokines KW - osteokines adaptation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203399 SN - 2218-273X VL - 10 IS - 3 ER - TY - JOUR A1 - Pereira, A. R. A1 - Trivanović, D. A1 - Herrmann, M. T1 - Approaches to mimic the complexity of the skeletal mesenchymal stem/stromal cell niche in vitro JF - European Cells and Materials N2 - Mesenchymal stem/stromal cells (MSCs) are an essential element of most modern tissue engineering and regenerative medicine approaches due to their multipotency and immunoregulatory functions. Despite the prospective value of MSCs for the clinics, the stem cells community is questioning their developmental origin, in vivo localization, identification, and regenerative potential after several years of far-reaching research in the field. Although several major progresses have been made in mimicking the complexity of the MSC niche in vitro, there is need for comprehensive studies of fundamental mechanisms triggered by microenvironmental cues before moving to regenerative medicine cell therapy applications. The present comprehensive review extensively discusses the microenvironmental cues that influence MSC phenotype and function in health and disease – including cellular, chemical and physical interactions. The most recent and relevant illustrative examples of novel bioengineering approaches to mimic biological, chemical, and mechanical microenvironmental signals present in the native MSC niche are summarized, with special emphasis on the forefront techniques to achieve bio-chemical complexity and dynamic cultures. In particular, the skeletal MSC niche and applications focusing on the bone regenerative potential of MSC are addressed. The aim of the review was to recognize the limitations of the current MSC niche in vitro models and to identify potential opportunities to fill the bridge between fundamental science and clinical application of MSCs. KW - Mesenchymal stem/stromal cells KW - skeletal progenitor cells KW - niche KW - in vitro models KW - bone KW - tissue engineering Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-268823 SN - 1473-2262 VL - 37 ER - TY - JOUR A1 - Fuchs, Konrad F. A1 - Heilig, Philipp A1 - McDonogh, Miriam A1 - Boelch, Sebastian A1 - Gbureck, Uwe A1 - Meffert, Rainer H. A1 - Hoelscher-Doht, Stefanie A1 - Jordan, Martin C. T1 - Cement-augmented screw fixation for calcaneal fracture treatment: a biomechanical study comparing two injectable bone substitutes JF - Journal of Orthopaedic Surgery and Research N2 - Background The role of cement-augmented screw fixation for calcaneal fracture treatment remains unclear. Therefore, this study was performed to biomechanically analyze screw osteosynthesis by reinforcement with either a calcium phosphate (CP)-based or polymethylmethacrylate (PMMA)-based injectable bone cement. Methods A calcaneal fracture (Sanders type IIA) including a central cancellous bone defect was generated in 27 synthetic bones, and the specimens were assigned to 3 groups. The first group was fixed with four screws (3.5 mm and 6.5 mm), the second group with screws and CP-based cement (Graftys (R) QuickSet; Graftys, Aix-en-Provence, France), and the third group with screws and PMMA-based cement (Traumacem (TM) V+; DePuy Synthes, Warsaw, IN, USA). Biomechanical testing was conducted to analyze peak-to-peak displacement, total displacement, and stiffness in following a standardized protocol. Results The peak-to-peak displacement under a 200-N load was not significantly different among the groups; however, peak-to-peak displacement under a 600- and 1000-N load as well as total displacement exhibited better stability in PMMA-augmented screw osteosynthesis compared to screw fixation without augmentation. The stiffness of the construct was increased by both CP- and PMMA-based cements. Conclusion Addition of an injectable bone cement to screw osteosynthesis is able to increase fixation strength in a biomechanical calcaneal fracture model with synthetic bones. In such cases, PMMA-based cements are more effective than CP-based cements because of their inherently higher compressive strength. However, whether this high strength is required in the clinical setting for early weight-bearing remains controversial, and the non-degradable properties of PMMA might cause difficulties during subsequent interventions in younger patients. KW - arthritis KW - bone KW - calcaneus KW - cement KW - fracture KW - fixation KW - osteoporosis KW - sanders KW - screw Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-230336 VL - 15 ER - TY - THES A1 - Koschitzki, Kim Christine Cornelia T1 - Evaluation of preclinical animal models in bone tissue engineering and their success in clinical translation T1 - Evaluierung von vorklinischen Tiermodellen für Bone Tissue Engineering und von ihrem Erfolg in der klinischen Umsetzung N2 - Autologous bone still represents today’s gold standard for the treatment of critical size bone defects and fracture non-unions despite associated disadvantages regarding limitations in availability, donor site morbidity, costs and efficacy. Bone tissue engineered constructs would present a promising alternative to currently available treatments. However, research on preclinical animal studies still fails to provide clinical applicable results able to allow the replacement of currently applied methods. It seems that the idea of bone tissue engineering, which has now been integral part of academic studies for over 30 years, got somehow stuck at an intermediate level, in between intense preclinical research and striven stages of initial clinical trial phases. A clear discrepancy exists between the number of studies with preclinical animal models for bone tissue engineering and the number of clinically approved bone tissue engineered constructs available to patients. The aim of this thesis was hence to evaluate preclinical animal models for bone tissue engineering as well as the perception of scientists and clinicians towards these models. Moreover, the general role of bone tissue engineering and its clinical need assessed by scientists and surgeons was investigated. A survey was conducted questioning both scientific and clinical opinions on currently available study designs and researchers’ satisfaction with preclinical animal models. Additionally, a literature research was conducted, resulting in 167 papers from the last 10 years that report current designs of preclinical orthotopic animal studies in bone tissue engineering. Thereby, the focus lied on the description of the models regarding animal species, strain, age, gender and defect design. The outcome of the literature search was evaluated and compared to the outcome obtained from the survey. The survey data revealed that both scientists and surgeons generally remain positive about the future role of bone tissue engineering and its step to clinical translation, at least in the distant future, where it then might replace the current gold standard, autologous bone. Moreover, most of the participants considered preclinical animal models as relevant and well developed but the results as not yet realizable in the clinics. Surgeons thereby demonstrated a slightly more optimistic perception of currently conducted research with animal models compared to scientists. However, a rather inconsistent description of present preclinical study designs could be discerned when evaluating the reported study designs in the survey and the papers of the literature search. Indeed, defining an appropriate animal species, strain, age, gender, observation time, observation method and surgical design often depends on different indications and research questions and represents a highly challenging task for the establishment of a preclinical animal model. The existing lack of valid guidelines for preclinical testing of bone tissue engineering leads hence to a lack of well standardized preclinical animal models. Moreover, still existing knowledge gaps regarding aspects that affect the process of fracture healing, such as vascularization or immunological aspects, were found to hinder clinical translation of bone tissue engineered constructs. Using literature review and survey, this thesis points out critical issues that need to be addressed to allow clinical translation of bone tissue engineered constructs. It can be concluded that currently existing study designs with preclinical animal models cannot live up to the claim of providing suitable results for clinical implementation. The here presented comprehensive summary of currently used preclinical animal models for bone tissue engineering reveals a missing consensus on the usage of models such as an apparent lack of reporting and standardization regarding the study designs described in both papers from the literature review and the survey. It thereby indicates a crucial need to improve preclinical animal models in order to allow clinical translation. Despite the fact that participants of the survey generally revealed a positive perception towards the use of bone tissue engineered constructs and affirmed the clinical need for such novel designs, the missing standardization constitutes a main weak point for the provision of reliable study outcome and the translational success of the models. The optimization of reproducibility and reliability, as well as the further understanding of ongoing mechanisms in bone healing in order to develop effective tissue engineered constructs, need to form the basis of all study designs. The study outcomes might then fulfill the requirements of maybe today's and hopefully tomorrow's aging population. N2 - Über die letzten 30 Jahre hat die Rolle von Bone Tissue Engineering vielversprechenden Fortschritt gemacht und immer neue Ansätze werden etabliert. Somit stellt Bone Tissue Engineering eine aussichtsvolle Alternative zu dem heutigen Goldstandard (autogene Knochenersatzmaterialien) dar, nachdem diese häufig mit Nachteilen einhergehen: limitierte Verfügbarkeit, Morbidität durch Zweiteingriffe, ungenügend Stabilität und Kosten. Die klinische Umsetzung findet jedoch nicht so schnell statt, wie ursprünglich erhofft und es scheint, als würde die vorklinische Forschung auf der Stelle treten. Das Ausbleiben von reproduzierbaren und standardisierten vorklinischen Studien verhindert dabei eine "bench to bedside" Translation. Ziel dieser Doktorarbeit war es, derzeitige präklinische Tiermodelle für Bone Tissue Engineering zu evaluieren und dabei zu untersuchen, woran es liegen könnte, dass die Lücke zwischen vorklinischen Studienergebnissen und klinischer Umsetzung noch immer existiert. Es wurde ein Fragebogen erstellt, anhand dessen die generelle Meinung gegenüber Bone Tissue Engineering und die Effizienz derzeitiger präklinischer Studienmodelle aus sowohl klinischer, als auch wissenschaftlicher Sicht hinterfragt wurde. Hier wurde außerdem auf die Beurteilung der Zufriedenstellung solcher Modelle seitens der Forscher eingegangen. Darüber hinaus erfolgte eine systemische Literatursuche auf der Online-Plattform “Pubmed” mit dem Ziel Studien der letzten zehn Jahre über präklinische orthotopische Tiermodelle in Bone Tissue Engineering zusammenzufassen und die verschiedenen Studiendesigns zu evaluieren. Der Fokus lag dabei auf der Beschreibung der Tiermodelle bezüglich Tierart, Geschlecht, Alter und Defektdesign. Ergebnisse der Literatursuche wurden anschließend evaluiert und mit den Antworten aus dem Fragebogen verglichen und diskutiert. Es hat sich anhand des Fragebogens gezeigt, dass sowohl Wissenschaftler, als auch Chirurgen positiv gestimmt sind, was die zukünftige Anwendung von Bone Tissue Engineering in den Kliniken betrifft. Jedoch beurteilten die meisten Teilnehmer des Fragebogens die präklinischen Tiermodelle zwar als relevant und gut entwickelt, deren Ergebnisse als klinisch allerdings nicht anwendbar. Dabei fiel die Einschätzung präklinischer Forschung mit Tiermodellen unter den Chirurgen etwas optimistischer aus als unter den Forschern. Die Evaluierung der Studien aus dem Fragebogens und der Literatursuche zeigte jedoch auch, dass die darin beschriebenen Tiermodelle einen eher uneinheitlichen Studienaufbau aufweisen. Tatsächlich stellt die Etablierung eines fundierten Studiendesigns im Anbetracht der zahlreichen Möglichkeiten eine immense Herausforderung dar. Die Festlegung eines Versuchsaufbaus hängt dabei von der Wahl der Tierart, dessen Geschlecht und Alter, des chirurgischen Ablaufs, sowie der technischen und zeitlichen Beobachtungsmöglichkeit ab. Es stellte sich heraus, dass für viele Studien eine diesbezüglich notwendige Standardisierung kaum existiert und dadurch Studienergebnisse entstehen, die schwer reproduzierbar sind und somit den Ansprüchen einer klinischen Umsetzung nicht gerecht werden können. Hinzu kommen außerdem die noch immer bestehenden Wissenslücken in Bezug auf Knochenheilung beeinflussende Faktoren wie Vaskularisation und Abläufe des Immunsystems. Abschließend lässt sich sagen, dass die durchgeführte Evaluierung von Studien mit präklinischen Tiermodellen eine fehlende Standardisierung derzeit existierender Studiendesigns darlegt und eine klinische Umsetzung der daraus resultierenden Studienergebnissen somit noch nicht möglich ist. Auch wenn die Teilnehmer des Fragebogens den Bedarf an neuen, klinisch anerkannten Methoden für Knochenaufbauten nahelegten und eine generell positive Einstellung gegenüber dem potentiellen Gebrauch von Bone Tissue Engineering Konstrukte in den Kliniken zeigten, ist die Ablösung von autologem Knochen durch solch neuartige Designs nicht realisierbar, solange die Reproduzierbarkeit der Daten aus präklinischen Tiermodellstudien fehlt. Zusammen mit wegweisenden Richtlinien und fundiertem Wissen über grundliegende Mechanismen im Knochenheilungsprozess, sollte sie die Basis eines jeden Studienaufbaus mit präklinischen Tiermodellen darstellen, um schließlich zu den Ergebnissen zu gelangen, die es für eine klinische Umsetzung von Bone Tissue Engineering bedarf. KW - bone KW - tissue KW - engineering Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207593 ER - TY - THES A1 - Reppenhagen, Stephan T1 - Verwendung eines biphasischen keramischen Knochenersatzmaterials in Kombination mit Fibrinkleber für die Therapie gutartiger Knochentumoren und tumorähnlicher Läsionen T1 - Biphasic ceramic bone substitute in combination with fibrin for the therapy of benign bone tumors and tumor-like lesions N2 - Knochendefekte, die in der Behandlung von gutartigen Knochentumoren und tumorähnlichen Läsionen entstehen, stellen ein klinisches Problem mit limitierten Therapieoptionen dar. In der Regel werden diese Defekte mit autologem Knochen aufgefüllt. Die Gewinnung von autologem Knochen, z. B. vom Beckenkamm ist jedoch quantitativ limitiert und häufig mit Komplikationen verbunden. Aus diesem Grund wird versucht, synthetische Knochenersatzmaterialien mit ähnlichen Eigenschaften, wie denen des autologen Knochens, zu entwickeln. In der vorliegenden prospektiven Studie wurde die Anwendung einer biphasischen Keramik aus 60% Hydroxylapatit und 40% beta-Tricalciumphosphat in Verbindung mit verdünntem Fibrinkleber für die Therapie von gutartigen Knochentumoren und tumorähnlichen Läsionen bei 51 Patienten untersucht. Hierfür wurden die Röntgenbilder analysiert und das Resorptionsverhalten beurteilt. Eine komplette Resorption wurde anhand der radiologischen Verläufe in keinem Fall beobachtet. Die günstigsten Voraussetzungen für eine Resorption wurde bei kleinen Defekten (< 10,5 cm³) beobachtet (p < 0,05). Die übrigen Einflussgrößen zeigten nach einer Nachuntersuchungszeit von bis zu 56 Monaten keine statistisch signifikanten Unterschiede. In der histologischen Untersuchung eines Präparates bei einer Revision wurde Knochenneubildung auf dem Knochenersatzmaterial nachgewiesen. In diesem Fall war das Knochenersatzmaterial noch nachweisbar. Die Verwendung des Materials ist klinisch einfach und sicher. Die aufgetrete-nen Komplikationen entsprechen in ihrer Häufigkeit den zu erwartenden postoperativen Komplikationen und sind mit den Angaben der Literatur vergleichbar. Es wurden keine postoperativen Frakturen oder Beeinträchtigung des Längenwachstums von Röhrenknochen beobachtet. In einem Fall musste aufgrund eines intraossären Ganglions eine operative Revision erfolgen. In der histologischen Aufarbeitung dieser Biopsie konnte Knochenneubildung und Osseointegration sowie eine partielle Resorption des Knochenersatzmaterials nachgewiesen werden. Die Verwendung des Knochenersatzmaterials wird von den Patienten überwiegend als positiv beurteilt. Zusammenfassend ist das verwendete Knochenersatzmaterial eine einfach und sicher anzuwendende Alternative zu autologem Knochen in der Therapie von gutartigen Knochentumoren und tumorähnlichen Läsionen. N2 - Bone defects resulting from tumor resection represent a challenge facing limited therapeutic options. Most commonly, defects are reconstructed with autologous bone graft which is associated with limited availability and donor site morbidity. Therefore, recent research has focused on synthetic biomaterials as bone graft substitutes. In the present study, a biphasic ceramic consisting of 60% hydroxyapatite and 40% beta-tricalciumphosphate combined with a fibrin sealant was used to reconstruct defects in 51 patients after resection of benign bone tumors or tumor-like lesions. Radiologic analysis showed complete bony defect consolidation in 50 out of 51 patients after up to 56 months. No postoperative fractures were observed. Revision surgery had to be performed in one case. Histological analysis showed new bone formation and good biocompatibility and osseointegration of the implanted material. Subjective patient satisfaction after application of bone substitute was predominantly positive. In summary, the biphasic ceramic in combination with fibrin sealant was proven an effective, safe and easy to handle alternative to autologous bone graft eliminating the risk of donor site morbidity for the patient. KW - Knochenersatz KW - Knochen KW - Knochentumor KW - Fibrin KW - Keramik KW - Hydroxylapatit KW - ß-Tricalciumphosphat KW - Tumorähnliche Läsion KW - bone KW - bone substitute KW - hydroxyapatite KW - beta-tricalciumphosphate Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-84068 ER -