TY - JOUR A1 - Gleiter, Rolf A1 - Bischof, Peter A1 - Gubernator, Klaus A1 - Christl, Manfred A1 - Schwager, Luis A1 - Vogel, Pierre T1 - 2,3-Bis(methylene)bicyclo[2.1.1]hexane and 3,4-Bis(methylene)tricyclo[3.1.0.0\(^{2,6}\)]hexane : Interaction between a π System and a Cyclobutane or Bicyclobutane Moiety N2 - The He (I) photoelectron spectra of 2-bicyclo[2.1.l]hexene (1), 2,3-bis(methylene)bicyclo[2.1.l]hexane (3), and 3,4-bis(methylene)tricyclo[3.l.O.0\(^{2.6}\)]hexane (4) have been investigated. The assignment given is based on a ZDO model and semiempirical calculations. Tagether with the PE data of benzvalene (2), the reported data allow a comparison between 1-2 and 3-4. This yields a measure of the interactions between 8 cyclobutane or 8 bicyclobutane moiety and a double bond system within a ZDO model. The resonance integral found in the case of 1 and 3 amounts to -1.9 eV, that for 2 and 4, to -2.3 eV. The investigations furthermore reveal that the electronic factors which contribute to the higher reactivity of the bicyclobutane compounds amount to 5 kcal/mol. KW - Chemie Y1 - 1985 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-31845 ER - TY - JOUR A1 - Christl, Manfred A1 - Lang, Reinhard A1 - Herzog, Clemens A1 - Stangl, Roland A1 - Peters, Karl A1 - Peters, Eva-Maria A1 - Schnering, Hans Georg von T1 - Reaktion von Homobenzvalen mit Tetracyanethylen : Bildung eines Tetracyandihydrobarbaralan- und eines Tetracyancyclopropan-Derivats N2 - In den Reaktionen von Tetracyanethylen (TCNE) und 5,6-Dichlor-2,3-dicyan-p-benzochinon mit Benzvalen haben wir kürzlich die ersten Beispiele für die lange gesuchte einstufige 1,4-Cycloaddition eines Alkens an ein Vinylcyclopropan gcfunden(I~J. Sie ist als [(.,2.+.2s)+ 112J-Prozeß der Dicls-Alder-Addition nahe verwandtllbl. Allerdings entsteht das betreffende TCNE-Addukt, ein Dihydrosemibullvalen-Derivat, nur in einer Ausbeute von wenigen Prozent. Die Hauptprodukte gehen aus einer Zwitterionischen Zwischenstufe hervor, die durch Anlagerung von TCNE an die Benzvalen-n-Bindung resultiert. Professor Rolf Huisgen zum 65. Geburtstag gewidmet KW - Chemie KW - Homobenzvalene Y1 - 1985 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-31839 ER - TY - JOUR A1 - Christl, Manfred A1 - Schreck, Michael T1 - 1,2,3,5,8,8a-Hexahydronaphthalin aus 1,2-Cyclohexadien N2 - Reaktionen von 1,3-Butadien und einigen seiner Methylderivate mit 1a und 1- Methyl-1,2-cyclohexadien 1b sowie den Übergang der [2 + 2]-Cycloaddukte 2 und 3 in das bisher unbekannte 1,2,3,5,8,8a-HexahydronaphthaJin 4a und einige seiner Methylderivate KW - Chemie KW - Butadien Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-31656 ER - TY - JOUR A1 - Gleiter, Rolf A1 - Bischof, Peter A1 - Christl, Manfred T1 - Electronic Structure of Octavalene : Photoelectron Spectroscopic Investigations N2 - The He I photoelectron (PE) spectra of octavalene (5) as weil as its hydrogenated products 6-8 have been investigated. The assignment given is based on an empirical comparison of 5-8 with related compounds, a ZDO model, and semiempirical and ab initio calculations. Within the ZDO model the interaction between the buta.diene moiety and the bicyclobutane fragment of 5 is described by a resonance integral of -2.3 eV. The orbitalsequence of 5 is found tobe 2a\(_2\) (\(\pi\)-\(\sigma\)), 9a\(_1\) (\(\sigma\)), 3b1 (\(\pi\) - \(\sigma\)), 1a\(_2\) (\(\sigma\) + \(\pi\)), 2b\(_1\) (\(\sigma\) + \(\pi\)). KW - Chemie KW - Octavalen KW - Photoelektron Y1 - 1986 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-31588 ER - TY - JOUR A1 - Christl, Manfred A1 - Braun, Martin T1 - Generation and interception of 1-OXA-2,3-Cyclohexadiene and 1,2,4-Cyclohexatriene N2 - The cycloadducts 6 and 7 of tricyc1o[4.1.0.0 2 ,7)hepta- 3,4-diene (~) with styrene and 1,3-butadiene rearrange to unusual products on thermolysis, namely the cycloheptatriene derivatives ~ and 10. 1-0xa-3,4-cyclohexadiene (20) is generated smoothly from 6,6-dichloro-3-oxabicyclo[3.1.0]hexane (22) and n-butyllithium. 1-0xa-2,3-cyclohexadiene (11) is formed from 6-exo-bromo-6-endo-fluoro-2-oxabicyclo[ 3.1.0]hexane (30) and methyllithium. In the presence of activated olefins, this reaction provides an efficient route to 28 and 33 - 38, the trapping products of 21. Interestingly, [2+2]-cycloadditions do not take place at the same double bond of 21 as [4+2]-cycloadditions. The reactions of 1,3-cyclopentadiene and indene with bromofluorocarbene afford 6-exo-bromo-6-endo-fluorobicyclo[3.1.0]hex-2-ene (50) and its benzo derivative ~, respectively. On treatment of these compounds with methyl lithium in the presence of styrene, the interception products 53 and 47 of 1,2,4-cyc10- hexatriene (44) and its benzo derivative 43, respectively, are formed in good yields. KW - Chemie Y1 - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56566 ER - TY - THES A1 - Maksimenka, Katsiaryna T1 - Absolute Configuration by Circular Dichroism: Quantum Chemical CD Calculations T1 - Absolute Konfiguration durch Circular-Dichroismus: Quantenchemische Rechnungen des Circular-Dichroismus (CD) N2 - Quantum chemical calculations of circular dichroism (CD) spectra in combination with experimental CD studies are one of the most efficient analytical tools for the elucidation of the three-dimensional structure of a chiral molecule. In the present work 18 chiral compounds of most different molecular structures and origins were investigated using various theoretical methods (the semiempirical CIS methods, the time-dependent DFT and DFT/MRCI approaches). The advantages and limitations of the applied methods were discussed in the context of the studied compounds. Furthermore, the last part of this work deals with the CD investigations of a chiral compound in the crystalline state. A well-known natural product with a specific conformation/CD spectrum behavior was used as a model compound to examine a novel solid-state CD method and to investigate the possibility of its improvement to provide a higher reliability for the assignment of the absolute configuration. N2 - Quantenchemische Rechnungen des Circular-Dichroismus (CD) in Kombination mit experimentellen CD-Studien sind eines der besten analytischen Werkzeuge zur Aufklärung der dreidimensionalen Struktur eines chiralen Moleküls. In der vorliegenden Arbeit wurden 18 chirale Verbindungen mit unterschiedlichsten Strukturen und von unterschiedlichster Herkunft unter Verwendung von verschiedenen theoretischen Methoden (semiempirische CIS-Methoden, zeitabhängige DFT- und DFT/MRCI-Ansätze) untersucht. Die Vorteile und Grenzen der angewandten Methoden wurden im Rahmen der untersuchten Verbindungen diskutiert. Desweiteren befasst sich der letzte Teil der vorliegenden Arbeit mit den CD-Untersuchungen einer chiralen Verbindung im kristallinen Zustand. Ein bekannter Naturstoff mit einem spezifischen Konformation/CD-Spektrum-Verhalten wurde als Modellverbindung verwendet, um einen neuartige Festkörper-CD-Ansatz zu testen, und um die Möglichkeit seiner Verbesserung zu untersuchen, um eine höhere Zuverlässlichkeit für die Zuordnung der absoluten Konfiguration zu bieten. KW - Circular-Dichroismus KW - Quantenchemie KW - Konfiguration KW - Quantenchemische Rechnungen KW - Absolute Konfiguration KW - Absolute Configuration KW - Circular Dichroism KW - Quantum Chemical CD Calculations Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56552 ER - TY - JOUR A1 - Schreck, Michael A1 - Christl, Manfred T1 - Generation and Interception of 1-Oxa-3,4-cyclohexadiene N2 - No abstract available KW - Chemie Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-31601 ER - TY - JOUR A1 - Schreck, Michael A1 - Christl, Manfred T1 - Freisetzung und Abfangreaktionen von 1-Oxa-3,4-cyclohexadien N2 - No abstract available KW - Chemie Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-31597 ER - TY - THES A1 - Jarre, Gerald T1 - Funktionalisierte Nanodiamanten - Diels-Alder-Reaktion auf Nanodiamantpartikeln T1 - Functionalized Nanodiamonds - Diels Alder reaction on nanodiamond particles N2 - Für Diamantpartikel basiert diese Funktionalisierungschemie auf den bereits vorhanden Oberflächengruppen, die durch die Synthese und Reinigung entstanden sind. Die stabilste Anbindung wäre eine C-C-Verknüpfung der Diamantatome auf der Oberfläche mit den organischen Reagenzien. Um diese Verknüpfung zu erreichen, wurde die Oberfläche mittels Diels-Alder-Reaktion funktionalisiert. Grundvoraussetzung hierfür ist eine Oberfläche, die über eine ausreichende Menge an C=C-Doppelbindungen verfügt. Dies wurde durch eine thermische Behandlung erreicht. Die gewonnenen Ergebnisse zeigen, dass ab einer Behandlungstemperatur von 750 °C keine funktionellen Gruppen durch die eingesetzten Analysemethoden mehr nachgewiesen werden können. Die Elementaranalyse der einzelnen Proben zeigt einen deutlichen Anstieg des Kohlenstoffgehaltes. Nach erfolgreicher thermischer Behandlung des Diamanten wurde durch die Verwendung von Cyclopentadien und Anthracen als Dien gezeigt, dass eine Funktionalisierung über eine Diels-Alder-Reaktion generell möglich ist. Daher wurde als alternatives Dien ein o-Chinodimethan eingesetzt. Hierzu wurde eine systematische Untersuchung der Umsetzung der unterschiedlichen thermisch behandelten Proben mit α,α’-Dibrom-o-xylol durchgeführt. Hierdurch wurde gezeigt, dass der Ausgangsdiamant bei mindestens 750 °C behandelt werden muss, um eine messbare Oberflächenbelegung zu erhalten. Im Anschluss wurde die Funktionalisierbarkeit der eingeführten Arylgruppen überprüft. Durch die Einführung unterschiedlicher funktioneller Gruppen ist es dann möglich, Moleküle für spezielle Anwendungen anzubinden. Durch die Anwendung der klassischen Aromatenchemie war es möglich, die aromatischen Oberflächen zu nitrieren und sulfonieren. Die Sulfonsäuregruppe konnte partiell zum Thiol reduziert werden. Durch Umsetzung dieser Thiolgruppen war es möglich, einen mannosemodifizierten sowie einen farbstoffmodifizierten Diamanten herzustellen. Da die nachträgliche Einführung von Carboxylgruppen mit hohem synthetischem Aufwand verbunden ist, wurde alternativ ein carboxyltragender Vorläufer mit dem thermisch behandelten Diamant umgesetzt. Hierbei wurde eine Oberflächenbelegung von ca. 0.8 mmol g-1 erreicht (Ausgangsdiamant thermisch behandelt bei 750 °C). Im Anschluss wurde die Säuregruppe mit einem einfach geschützten Diamin weiterfunktionalisiert. Hierbei wurden unterschiedliche Methoden zur Amidbildung getestet. Als effektivste Methode stellte sich die Synthese über ein Säurechlorid heraus. Infolgedessen war eine weitgehende Umsetzung (ca. 94 - 88 %) der Säuregruppe möglich. Eine weitere wichtige funktionelle Gruppe für die Anbindung größerer Einheiten stellen die Amine dar. Diese lassen sich einfach darstellen, z. B. durch Reduktion von Cyanogruppen. Daher wurde 2,3-Bis-(brommethyl)-5,6-dicyanopyrazin als Edukt für die Funktionalisierung eingesetzt. Nach anschließender Reduktion der Cyanogruppen wurden primäre Amine erhalten. Die so erzeugte Aminogruppe wurde mit Biotin weiter funktionalisiert. Die bisher eingesetzten o-Chinodimethane sind ausschließlich durch 1,4-Eliminierung zugänglich. Eine sinnvolle Alternative zu diesem Vorläufer ist die Verwendung eines Cyclobutenderivates. Der Vorteil liegt in einer einfacheren Reinigung des Produktdiamanten. Als Testverbindung wurde 2,4-Bis-(methylsulfonyl)-5,6-dihydro-cyclobuta-[d]-pyrimidin verwendet. Nach erfolgreicher Umsetzung mit dem Diamanten wurden die Thioethergruppen in Sulfone überführt und in 2-Position wurde das Sulfon gegen eine Aminogruppe ausgetauscht. Neben den durchgeführten Funktionalisierungsreaktionen wurde eine nasschemische Nachweismethode zur Quantifizierung von primären Aminen entwickelt. Ein Vorteil des Verfahrens ist, dass der Nachweis auf einfache Weise durchführbar ist und nur 1 – 2 mg Diamantprobe nötig sind. Die gewonnen Ergebnisse zeigen, dass durch den Nachweis verlässliche Angaben über die genaue Aminmenge erhalten werden. N2 - For nanodiamond particles the functionalisation chemistry is based on the already existing surface groups, which were introduced during synthesis and cleaning. The most stable grafting would be a C-C coupling of the diamond atoms on the surface with organic reagents. To achieve this linkage the surface is func-tionalized via Diels-Alder reaction. Basic prerequisite for this is a surface which has a sufficient amount of C=C double bonds. This was achieved by thermal treatment. The obtained results show, that above a treatment temperature of 750 °C no functional groups can be detected anymore by the used analytic methods. The elemental analysis of each sample shows a significant increase in carbon content. This is also an indication of a successful removal of most oxygen containing surface groups. After successful thermal treatment of the diamond it was shown by the usage of cyclopentadiene and anthracene, that in general a functionalization via Diels-Alder reaction is possible. Because of this as an alternative diene an o-quinodimethane was applied. For this purpose a systematic study of the reaction of the different thermally annealed diamond samples with α,α’-di-bromo-o-xylene was performed. This has shown that pristine diamond has to be treated at least at 750 °C to obtain a measurable surface coverage. Subsequently, the functionalization of the introduced aryl groups was investigated. By the introduction of different functional groups it is possible to bind molecules for specific applications. By applying classical aromatic chemistry, it was possible to nitrate and sulfonate the aromatic moieties. The sulfonic acid was partially reduced to a thiol. By reacting the thiol group it was possible to synthesize a mannose and dye modified nanodiamond Because the subsequent introduction of carboxylic groups is connected with a high synthetic effort an alternative carboxylic group carrying precursor was reacted with thermally annealed diamond. A surface coverage of 0.8 mmol g-1 was achieved (pristine diamond annealed at 750 °C). Subsequently, the carboxylic group was modified by introducing a Boc-protected diamine. Different methods for amide formation have been tested. As the most effective method the reaction using an acid chloride as an intermediate was identified. Using this coupling method, an almost complete conversion (about 94 – 88 %) of the acid group was possible. Another important functional group for the grafting of larger moities are the amines. They can easily be formed by e. g. the reduction a cyano group. Here 2,3-bis-(bromomethyl)-5,6-dicyanopyrazine was used as a precursor for the functionalization of the diamond. After subsequent reduction of the cyano groups, primary amines were obtained. The generated amino group have been reacted with biotin. So far the used o-quinodimethanes were solely accessible by 1,4-elimination. A reasonable alternative for these precursors is the use of a cyclobutene derivative. The advantage is an easier purification of the product. As a test compound 2,4-bis(methylsulfonyl)-5,6-dihydrocyclobuta-[d]-pyrimidine was used. After reaction with the diamond the thioether group was transformed into sulfones and in the 2-position the sulfone was replaced by an amino group. In addition to the functionalization reactions carried out in this work, a wet chemical method was developed for the quantification of primary amines on the diamond surface. An advantage of the developed method is that it can be easily carried out and only 1 - 2 mg of the diamond sample is needed. The obtained results show that through this detection method a reliable value of the exact amount of amine groups can be made. KW - Funktionalisierung KW - Festkörperoberfläche KW - Diels-Alder-Reaktion KW - Chinodimethane KW - Synthesediamant KW - Nanodiamant KW - Nanodiamond KW - Functionalisation KW - Diels-Alder reaction KW - o-Quinodimethane Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56229 ER - TY - THES A1 - Liang, Yuejiang T1 - Deagglomerierung und Oberflächenfunktionalisierung von Nanodiamant mittels thermochemischer und mechanochemischer Methoden T1 - Deagglomeration and surface modification of nanodiamond via thermochemical and mechanochemical method N2 - Nanodiamant weist aufgrund seiner herausragenden mechanischen, optischen und biokompatiblen Eigenschaften ein enormes Potential auf. Für eine erfolgreiche Anwendung muss dieser jedoch zunächst desagglomerisiert und an seiner Oberfläche funktionalisiert werden. In dieser Arbeit werden zwei unterschiedlichen Methoden zur Deagglomerierung und Oberflächenfunktionalisierung vorgestellt. Im ersten Teil wird die thermochemische Methode beschrieben, um den ungewöhnlich stark agglomerierten Detonationsnanodiamant zu deagglomerieren. Dabei wird die Strategie verfolgt, den Nanodiamant erst durch eine thermische Behandlung im Vakuum die vorhandenen Oberflächengruppe zu entfernen, π-Bindungen zu etablieren und dann dessen Oberfläche durch kovalente Bindungen zu modifizieren. Im zweiten Teil wird eine mechanochemische Methode für die Deagglomerierung und Oberflächenfunktionalisierung vorgestellt. Dabei wird ein völlig neuer Ansatz (BASD-Verfahren) entwickelt. Die Ultraschallbehandlung in Kombination mit zusätzlichen Mikrokeramikpartikeln eignet sich hervorragend, um Nanodiamant-agglomerate aufzubrechen. Zwei unterschiedliche Reaktionen mit zwei unterschiedlichen Nanodiamantsorten werden getestet: Eine einfache Kondensationsreaktion durch Silanisierung und eine Radikalreaktion über das Diazoniumsalz. In weiteren Experimenten kann gezeigt werden, dass sich die zuerst vorgestellte thermochemische Methode auch eignet, um aus fluoreszierenden NV-Nanodiamant kolloidalen NV-Nanodiamant mit funktionellen Gruppen herzustellen. Der letzte Teil der vorliegenden Arbeit beschäftigt sich mit der Herstellung von Nanodiamanten aus Diamantfilmen mit Hilfe des Top-down Ansatzes, da der gezielte und kontrollierte Aufbau der Gitterstruktur des Diamanten sowie die kontrollierte Einführung bisher nur durch CVD oder Ionenimplantationstechnik möglich ist. N2 - Nanodiamond exhibits an enormous potential due to its outstanding mechanical, optical and biocompatible properties. However, a successful application must begin with deagglomerated and functionalized particles. In this study, two different methods for deagglomeration and surface functionalization are introduced. The first part deals with a thermochemical method for deagglomeration of unusual tight agglomerated detonation nanodiamond. Thereby, a new strategy is developed, in which the nanodiamond is partially graphitized by annealing in vacuum in order to remove the present surface groups and establish π-Bonds, followed by surface-modification through covalent grafting. In the second part, a mechanochemical method for the deagglomeration and surface functionalization is presented. A completely new approach (BASD method) is developed. Ultrasonic treatment in combination with additional micro-ceramic particles is excellently suited for breaking up agglomerates of nanodiamond.Two different reactions with two different types of nanodiamond are tested: A simple condensation reaction by silanization and a radical reaction of the diazonium salt. Further experiments show that the first presented thermochemical method is also suitable for production of colloidal nanodiamond with functional groups from fluorescent NV-nanodiamond. In the last part of the present work, the production of nanodiamonds from diamond films by means of a top-down approach is described. So far, only the CVD production of diamond enables a direct access to a structured diamond material. KW - Nanopartikel KW - Synthesediamant KW - Aggregat KW - Funktionalisierung KW - Kolloid KW - Nanodiamant KW - Deagglomerierung KW - nanodiamond KW - deagglmeration KW - surface functionalisation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56296 ER -