TY - THES A1 - Handmann, Vera Iris T1 - Studien zur C/Si-Bioisosterie T1 - Studies on C/Si Bioisosterism N2 - Im Rahmen der vorliegenden Arbeit wurden Beiträge zur C/Si-Bioisosterie und zur asymmetrischen Synthese neuer siliciumhaltiger alpha-Aminosäuren geleistet. Im Vordergrund der Untersuchungen stand die Entwicklung neuer präparativer Methoden zur Darstellung siliciumhaltiger Wirkstoffe und die Untersuchung ihrer pharmakologischen Wirksamkeit sowie die Synthese racemischer und enantiomerenreiner siliciumhaltiger alpha-Aminosäuren des beta-(Trimethylsilyl)alanin-Typs. N2 - This work describes contributions to the field of C/Si bioisosterism and to the asymmetric synthesis of novel silicon-containing alpha-amino acids. The aim of these investigations was the development of new preparative methods for the synthesis of silicon-containing drugs and their pharmacological evaluation as well as the synthesis of racemic and enantiomerically pure silicon-containing alpha-amino acids of the beta-(trimethylsilyl)alanine type. KW - Kohlenstoff KW - Silicium KW - Bioisosterie KW - Muscarin KW - Antagonist KW - Aminosäurederivate KW - Aminosäuren KW - Antipsychotika KW - Bioanorganik KW - Kristallstrukturanalyse KW - Muscarin Antagonisten KW - pharmakologisches Profil KW - Silicium KW - Synthese KW - amino acids KW - antipsychotics KW - bioinorganic chemistry KW - C/Si bioisosterism KW - crystal structure analysis KW - muscarinic antagonists Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4719 ER - TY - THES A1 - Stemmler, Marco T1 - Ruthenium-Thiozimtaldehyd-Komplexe T1 - Ruthenium-thiocinnamaldehyde complexes, preparation and cycloaddition reactions N2 - Der erste Teil der vorliegenden Arbeit befasst sich mit der Darstellung neuer achiraler und chiraler kationischer Ruthenium-Bis(phosphan)-Thiozimtaldehyd-Komplexe. Die Umsetzung der chiralen Hydrogensulfid-Komplexe mit unterschiedlich substituierten Zimtaldehyden in Anwesenheit von Trifluoressigsäure führt zu den chiralen Thiozimtaldehyd-Komplexen. Im zweiten Teil dieser Arbeit wird gezeigt, dass Thiozimtaldehyd-Komplexe bereitwillig Hetero-Diels-Alder-Reaktionen eingehen. Derartige Reaktionen können mit freien Vertretern dieser Spezies aufgrund deren Instabilität nur schwierig durchgeführt werden. Der dritte Teil der vorliegenden Arbeit befasst sich mit Cycloadditionsreaktionen der Thiozimtaldehyd-Komplexe mit 1,3-dipolaren Reagenzien. In einem weiteren Teil dieser Arbeit wird die Abspaltung der Thioether-Liganden vom Komplexfragment untersucht. N2 - The first part of the present work deals with the synthesis of new achiral and chiral cationic Ru-bis(phosphane)-thiocinnamaldehyde complexes. The reaction of the chiral hydrogensulfido complexes with various substituted cinnamaldehydes in the presence of trifluoroacetic acid gives the chiral thiocinnamaldehyde complexes. In the second part of this work it is demonstrated that the thiocinnamaldehyde complexes readily undergo hetero-Diels-Alder-reactions. The third part of this work deals with cycloaddition reactions of thiocinnamaldehyde complexes with 1,3 dipolar molecules. In a further part of this work the elimination reactions of the thiopyran ligands from the complex fragments are examined. KW - Ruthenium KW - Zimtaldehyd KW - Cycloaddition KW - Thiopyrane KW - Thiozimtaldehyd KW - Ruthenium KW - Cycloaddition KW - Thiopyran KW - thiocinnamaldehyde KW - ruthenium KW - cycloaddition KW - thiopyran Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4050 ER - TY - THES A1 - Canepa, Giuseppe T1 - Die vielseitigen Koordinationsmodi von Phosphanliganden mit integrierten C6-Aromaten am Rhodium und Iridium T1 - The versatile Coordination Modes of Phosphane Ligands with integrated C6-Aromates at Rhodium and Iridium N2 - Aren-Halbsandwichkomplexe des Rhodiums und Iridiums wurden dargestellt und ihre Reaktivität gegenüber Substrate wie Wasserstoff, Olefine oder Alkine untersucht. Neu synthetisierte Trialkylphosphane mit integrierten Arylgruppen wurden als Chelatliganden eingesetzt sowie intramolekulare C-H Aktivierungen mit diesen Phosphanen durchgeführt. N2 - Arene halfsandwich-type complexes of rhodium and iridium have been prepared and their reactivity toward substrates like hydrogen, olefins or alkynes has been studied. New synthesized trialkyl phosphanes with integrated aryl groups have been used as chelating ligands, C-H activations with these phosphanes have been carried out. KW - Halbsandwich-Verbindungen KW - Rhodium KW - Iridium KW - Rhodiumkomplexe KW - Iridiumkomplexe KW - Phosphine KW - Halbsandwichkomplexe KW - Aromaten KW - Rhodium KW - Iridium KW - Phosphane KW - Halfsandwich-type-complexes KW - aromates KW - rhodium KW - iridium KW - phosphanes Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-3938 ER - TY - THES A1 - Klüpfel, Bernd T1 - P-chirale funktionelle Phosphane durch Hydrophosphinierung mit kationischen Phosphan-Eisenkomplexen T1 - P-chiral functional phosphines by hydrophosphination with cationic iron-phosphine complexes N2 - Chirale Phosphane besitzen als Liganden in Übergangsmetallkomplexen für die enantioselektive Synthese und Katalyse gesteigertes Interesse. Der Nobelpreis für Knowles im Jahre 2001 für die enantioselektive Synthese von L-Dopa, katalysiert durch einen optisch reinen DIPAMP-Rhodiumkomplex, zeigt die Bedeutung von chiralen Phosphanen als Katalysatorbausteine die stereochemische Information übertragen. Bei der Synthese von chiralen Phosphanen werden gewöhnlich teuere Verfahren angewandt, wie Einsatz chiraler Hilfsguppen oder die Trennung racemischer Gemische durch Enatiomerentrennung. Ein weiterer Zugang zur Knüpfung von P-C-Bindungen besteht in der Hydrophosphinierungsreaktion; eine Addition der P-H-Funktion an Alkene. In diesem Zusammenhang wurde gezeigt, dass z. B. die Reaktion von PH3 mit Acrylsäuremethylester in Gegenwart von AIBN keine Chemoselektivität aufweist, was zu einem Gemisch der primären, sekundären und tertiären Phosphane P(H)2-n[(CH2)2CO2Et]n+1 (n = 0, 1, 2), sowie zur Bildung des in der Seitenkette alkylierten Phosphans P[(CH2)2CO2Et]2{CH2C(H)(CO2Et)[(CH2)2CO2 Et]} führt. Eine Möglichkeit die Chemoselektivität des Hydrophosphinierungsprozesses zu erhöhen, ist die Aktivierung der P-H-Funktion durch Übergangsmetallfragmente, jedoch existiert zu diesem Thema ein nur begrenzter Kenntnisstand. In dieser Arbeit wurden P-chirale sekundäre Phosphane durch Insertion von organischen Mehrfachbindungssystemen wie substituierten Alkenen und Heterocumulenen in die P-H-Bindung der primär-Phosphan-Komplexe {C5R5(OC)2Fe[P(R’)H2]}BF4 (R = H, Me; R’ = Alkyl, Aryl) dargestellt. Im Falle von Acetylendicarbonsäuredimethylester beobachtet man eine doppelte Hydrophosphinierung, was zum diastereospezifischen Aufbau von der Zweikernkomplexe C5R5(OC)2Fe{P(H)(R’)[C(H)(CO2Me)]}}2(BF4)2 (R = H, Me; R’ = t-Bu, 2-py) mit vier stereogenen Zentren führt. Die Verwendung von p-Benzochinon bietet die Möglichkeit 2,5-Bis(hydroxy)arylphosphanliganden aufzubauen, die für weitere Transformationen geeignet sind. 1-Hydroxyalkylphosphankomplexe werden bei der Hydrophosphinerung von Aldehyden und Ketonen erhalten, ebenso wie 2-Hydroxycyclohexylphosphankomplexe durch Reaktion der primär-Phosphan-Eisenkomplexe mit Cyclohexenoxid. Umwandlung in hochfunktionalisierte tertiär-Phosphankomplexe wird durch einen weiteren Hydrophosphinierungsschritt der Alkene H2C=CHX (X = CN, 2-py), Diazoessigsäureethylester, p-Benzochinon oder Ethylisocyanat erreicht. In speziellen Fällen wird die Bildung von Azaphospholanliganden beobachtet. Freisetzung der Phosphane vom Metall wird durch photoinduzierten Ligandentausch ermöglicht. Weiterhin eigen sich die chiralen, chelatphosphansubstituierten primär-Phosphankomplexe {C5H5(diphos)Fe[P(R)H2]} BF4 (diphos = DIOP, CHIRAPHOS) eine Stereokontrolle auf den Prozess der Hydrophosphinierung einfach substituierter Alkene zu Übertragen. In diesem Zusammenhang wurde auch eine erfolgreiche katalytische Hydrophosphinierung durchgeführt, wobei [C5H5(DIOP)Fe(NCMe)]BF4 als Katalysator fungierte. N2 - Chiral phosphines attract increasing interest as ligands in transition metal complexes used in enantioselective synthesis and catalysis. The Nobel prize award for Knowles in 2001 for the enantioselective synthesis of L-Dopa catalyzed by an optically pure DIPAMP-Rhodium complex indicates the importance of chiral phosphines as catalyst building blocks introducing stereochemical information. The syntheses of chiral phosphines usually involve expensive procedures, including the use of chiral auxiliaries or the separation of racemic mixtures by resolving methods. Another approach to the formation of P-C-bonds is given by the hydrophosphination process, the addition of the P-H-function to alkenes. In this context, it has been shown, for example, the reaction of PH3 with ethylacrylate in the presence of AIBN exhibits no chemoselectivity, resulting in a mixture of the primary, secondary and tertiary phosphines P(H)2-n[(CH2)2CO2Et]n+1 (n = 0, 1, 2), as well as the side chain alkylated phosphine P[(CH2)2CO2Et]2{CH2C(H)(CO2Et)[(CH2)2CO2Et]}. One possibility to increase the chemoselectivity of the hydrophosphination process is the activation of the P-H-bond by transition metal fragments, but only limited information is available concerning this topic. In this work, the synthesis of P-chiral secondary phosphines, characterized by phosphorus and side chain chirality has been realized via insertion of various organic multiple bond systems like substituted alkenes or heterocummulenes into the P-H-bond of the primary phosphine complexes {C5R5(OC)2Fe[P(R’)H2]}BF4 (R = H, Me; R’ = alkyl, aryl). In the case of acetylenedicarboxylic acid dimethylester a double hydrophosphination is observed, leading diastereospecifically to the dinuclear complexes {C5R5(OC)2Fe{P(H)(R’) [C(H)(CO2Me)]}}2(BF4)2 (R = H, Me; R’ = t-Bu, 2-py), bearing four stereogenic centres. The use of p-benzoquinone gives access to secondary 2,5-bis(hydroxy)aryl phosphine ligands, suitable for further derivatizations. a-Hydroxyalkyl phosphine iron complexes can be obtained by hydrophosphination of aldehydes and ketones, as well as b-hydroxycyclohexylphosphine complexes by reaction of the primary phosphine iron complexes with cyclohexenoxide. Transformation into highly functionalized tertiary phosphine complexes is performed by a further hydrophosphination step using the alkenes H2C=CHX (X = CN, 2-py), diazoacetic ethylester, p-benzoquinone or ethylisocyanate, respectively. In special cases formation of functionalized azaphospholane ligands is observed. Release of the phosphines from the metal is achieved by photo induced ligand exchange. In addition, primary phosphine iron complexes {C5H5(diphos)Fe[P(R)H2]}BF4 (diphos = DIOP, CHIRAPHOS) bearing chiral bis(phosphine) ligands have been used to provide the stereocontrol of the hydrophosphination process of simple substituted alkenes. In this context, a succesful catalytic hydrohosphination has been carried out, using the [C5H5(DIOP)Fe(NCMe)]BF4-complex as catalyst. KW - Phosphane KW - Metallierte Verbindungen KW - Stereoselektivität KW - Katalyse KW - Metallassistierte Hydrophosphinierung KW - Chirale sekundäre und tertiäre Phosphane KW - Stereoselektivität KW - Katalyse KW - Metal-assisted Hydrophosphination KW - Chiral secondary and teriary phosphines KW - Stereoselectivity KW - Catalysis Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-3149 ER - TY - THES A1 - Callejas-Gaspar, Berta T1 - Ein- und mehrkernige Rhodium- und Iridiumkomplexe mit konjugierten organischen Ketten als Brückenliganden T1 - Mono- and oligonucleare rhodium- and iridium complexes with conjugated organic chains as bridging ligands N2 - Die metallorganische Chemie spielt eine große Rolle in der Materialwissenschaft. Als besonders interessant hat sich die Einführung von Übergangsmetallen in organischen Polymer-Ketten bewährt, da man damit die physikalischen Eigenschaften dieser neuartigen Polymere verändern kann. Die große Variationsbreite an Strukturen und Oxidations-Stufen der metallorganischen Fragmente hat zur Entwicklung von Flüssigkristallen sowie von Kunststoffen mit magnetischen oder nicht-lineare optischen Eigenschaften geführt. In dieser Arbeit wird über die Synthese von zwei- und mehrkernigen Komplexen mit konjugierten Kohlenstoffbrücken und Vinyliden- oder Acetylenliganden als Endgruppen des Typs R1CºC-[M]=C=C(H)-R-(H)C=C=[M]-CºCR2 (A) und R1(H)C=C=[M]-CºC-R-CºC-[M]=C=C(H)R2 (B) (R1 = Akzeptorgruppe, R2 = Donorgruppe, R = Arylgruppe, [M] = Übergangsmetall-Komplexfragment) berichtet. Eine Synthesestrategie dafür wurde zuerst die Darstellung von eins- und mehrkernigen Fluoro- und Hydroxokomplexen der allgemeinen Zusammensetzung trans-[MX(L)(PiPr3)2] (M = Rh, Ir; X = OH, F; L = C=CHR’, CO, CNC6H3-2,6-Me2), trans-[{MX(PiPr3)2}n{µ-C6H(6-n) (CH=C=)n}] (n = 2, 3) und zweitens ihre Reaktivität gegenüber stannylierten 1-Alkinen und Dialkinen. Die Bedeutung der Hydroxo- und Fluoro-Komplexe liegt in ihrer erhöhten Reaktivität gegenüber Brönsted-Säuren und stannylierten Alkinen im Vergleich zu den Chloro-, Bromo und Iodo-Analoga. Solche Komplexe wurden auch mit Diisocyaniden als Brücken-Ligand synthetisiert. Wegen der Neuartigkeit von Alkinyl(isocyanid)rhodium(I)-Komplexen sollten verschiedene Syntheserouten zu diesen Verbindungen erkundet werden. Ihre Reaktivität wurde auch untersucht. Vor diesem Hintergrund war das Ziel der vorliegenden Arbeit, zunächst den Kreis der bekannten Alkinyl- und Vinyliden-Übergangsmetallkomplexe mit einem, zwei oder drei Metallzentren zu erweitern, in denen die Metalle durch ein konjugiertes p-Elektronensystem verbunden sind. An solchen Systemen sollte im Hinblick auf ihre Anwendungen als NLO-Materialien der Einfluss von Ligandsubstitution systematisch untersucht werden. In diesem Zusammenhang wurde eine Untersuchung mit Hilfe von IR- und RAMAN-Spektroskopie sowie quantenchemische Berechnungen des trans-Einflusses der Halogenliganden in quadratisch-planaren Rhodium(I)-Komplexe des Typs trans-[MX(L)(PiPr3)2] (X = F, Cl, Br, I; L = CO, =C=CH2, CNC6H3-2,6-Me2) in Kooperation mit D. Moigno am Institut für Physikalische Chemie am Lehrstuhl von Prof. W. Kiefer durchgeführt. N2 - The organometallic chemistry is very significant in the materials research. Particularly, is interesting the insertion of transition metals in organic polymer chains due their potential to chain the physical properties of the new polymers. The variation of the structures and oxidation states of the organometallic fragments has carried to development of liquid crystals and nonlinear optic materials. In this work were studied the synthesis of mono- and oligonuclear complexes in which the metals centres are linked through unsaturated carbon chains and as end groups vinylidene or acetyl ligands of the types R1CºC-[M]=C=C(H)-R-(H)C=C=[M]-CºCR2 (A) and R1(H)C=C=[M]-CºC-R-CºC-[M]=C=C(H)R2 (B) (R1 = acceptor group, R2 = donor group, R = aryl group, [M] = transition metal complex fragment). A convenient method for the synthesis of these compounds was in first place the synthesis of mono- and oligonuclear fluoro and hydroxo complexes of the general composition trans-[MX(L)(PiPr3)2] (M = Rh, Ir; X = OH, F; L = C=CHR’, CO, CNC6H3-2,6-Me2), trans-[{MX(PiPr3)2}n{µ-C6H(6-n) (CH=C=)n}] (n = 2, 3) and in second place their reactivity towards stannylated 1-alkynes and Dialkynes. Fluoro and hydroxo complexes are showing a higher reactivity towards Brönsted acids and stannylated alkins than the analogues chloro, bromo and iodo complexes. Similar compounds with a diisocyanide as bridging unit were also synthesised. Different preparative routes were investigated for the synthesis of these new alkinyl(isocyanide)rhodium(I) complexes, such as their reactivity. Therefore, the aim of this thesis was, to increase the circle of the famous acetylide and vinylidene transition metal complexes with one, two or three metals, in which the metals centres are linked through conjugate p-electron systems. The trans influence of halide ligands on square-planar rhodium(I) complexes of type trans-[RhX(L)(PiPr3)2] (X = F, Cl, Br, I; L = CO, =C=CH2, CNC6H3-2,6-Me2) was studied though IR- and RAMAN-Spectroscopy as quanten-chemical measures. This is interesting in order to improve the applications of this influence. The last mentioned work was carried in collaboration with D. Moigno (institute for physical chemistry: Prof. W. Kiefer). KW - Rhodiumkomplexe KW - Iridiumkomplexe KW - NLO-Polymere KW - Rhodium KW - Iridium KW - trans-Einfluss KW - NLO-Eigenschaften KW - rhodium KW - iridiun KW - trans influence KW - NLO properties Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-3040 ER - TY - THES A1 - Richter, Rolf Ingo T1 - Beiträge zur Chemie des höherkoordinierten Siliciums: Synthese, Struktur und Eigenschaften neuer Silicate mit SiO 3 C 2 -, SiO 4 C -, SiO 5 - und SiO 6 -Gerüst, Beiträge zur Chemie des tetrakoordinierten Siliciiums: Synthese, Struktur und Eigenschaften von Silanen, Silanolen und Siloxanen T1 - Contributions to the field of penta- and hexacoordinate silicon chemistry: syntheses, structures, and properties of new silicates with SiO3C2-, SiO4C-, SiO5-, and SiO6-skeletons N2 - Die vorliegende Arbeit stellt einen Beitrag zur Siliciumchemie dar — mit einem Schwerpunkt in der Chemie des penta- und hexakoordinierten Siliciums. Die Ergebnisse werden im Folgenden aufgegliedert in vier Themenkomplexe vorgestellt. 7.1 Synthese und Charakterisierung zwitterionischer l5Si-Silicate Im Rahmen der hier vorgestellten Untersuchungen wurden die bisher unbekannten zwitterionischen l5Si-Silicate 3–8 — lösungsmittelfrei oder in Form wohldefinierter Solvate — dargestellt. Erstmals konnte für die Substanzklasse der zwitterionischen l5Si-Spirosilicate an dem bereits bekannten l5Si-Silicat 1 durch 1H-VT-NMR-Experimente die Energiebarriere für die Enantiomerisierung im Sinne einer Berry-Pseudorotation in Lösung bestimmt werden. Durch Hydrolyse von 1 — gefolgt von Kondensationsreaktionen — wurde das neuartige Oktasilsesquioxan 2 dargestellt. Die Charakterisierung aller Verbindungen erfolgte durch Elementaranalysen, 1H-, 13C- und 29Si-NMR-Spektroskopie an Lösungen (außer 2), 29Si-VACP/MAS-NMR-Spektroskopie an Feststoffen und im Fall der Verbindungen 2, 3×½HO(CH2)2OH, 4×HO(CH2)2OH, 6, 7×3/2C4H8O2 und 8×2CH2Cl2 durch Einkristall-Röntgenstrukturanalysen. Anhand der Synthese von 1 durch Umsetzung von Dimethoxy(methyl)[(2,2,6,6-tetramethylpiperidino)methyl]silan mit Ethan-1,2-diol wurde gezeigt, das Ethan-1,2-diol zu einer selektiven Si–C-Spaltungsreaktion (Abspaltung eines Moläquivalents Methan) in der Synthese zwitterionischer l5Si-Spirosilicate in der Lage ist. Durch 1H-VT-NMR-Experimente wurde die Barriere des Enantiomerisierungsprozesses am Silicium-Zentrum von 1 zu 35.3(5) kJ mol–1 bestimmt. Durch Umsetzung von 1 mit Wasser in Methylenchlorid bei Raumtemperatur gelang die Synthese des Aminomethylsubstituierten Octasilsesquioxans 2. Die Synthese der Verbindungen 3–5 erfolgte durch Umsetzung der entsprechenden Trialkoxy[(amino)alkyl]silane mit Ethan-1,2-diol in Substanz (3) oder in Acetonitril (4 und 5). Die bereits bekannte Verbindung 6 wurde zwecks struktureller Charakterisierung resynthetisiert. Durch Umsetzung von Trimethoxy[(2,2,6,6-tetramethylpiperidino)methyl]-silan mit Benzoin gelang die Synthese von 7. Mit Verbindung 8 — dargestellt durch Umsetzung von Dimethoxy(methyl)[(2,2,6,6-tetramethylpiperidino)methyl]silan mit Brenzkatechin — gelang erstmals die Synthese eines zwitterionischen l5Si-Silicates mit SiO3C2-Gerüst. In siedendem Acetonitril konnte 8 unter Methan-Abspaltung zum bekannten zwitterionischen l5Si-Spirosilicat 9 umgesetzt werden. 7.2 Synthese und Charakterisierung anionischer l5Si-Silicate und dianionischer l5Si,l5Si’-Disilicate mit SiO5-Gerüst Im Rahmen der hier vorgestellten Untersuchungen wurden erstmals die anionischen l5Si-Silicate 11 und 13–15 sowie die dianionischen l5Si,l5Si’-Disilicate 10, 12 und 16 mit SiO5-Gerüst — lösungsmittelfrei oder in Form wohldefinierter Solvate — dargestellt. Die Charakterisierung dieser Verbindungen erfolgte durch Elementaranalysen, 1H-, 13C- und 29Si-NMR-Spektroskopie an Lösungen, 29Si-VACP/MAS-NMR-Spektroskopie am Festkörper sowie durch Kristallstrukturanalysen [(Δ,Δ/Λ,Λ)-10×2CH3CN, (Λ)-11×THF, meso-12×2CHCl3, 13, 14, 15×2THF und meso-16]. Die Synthesen der l5Si-Silicate 10–13 und 16 erfolgten in aprotischen organischen Lösungsmitteln durch Umsetzung von Tetramethoxysilan mit Benzilsäure, dem entsprechenden Amin und Wasser in dem erforderlichen stöchiometrischen Verhältnis. Das l5Si-[Trimethylsilanolato(1–)]silicat 14 wurde ausgehend von dem Hydroxosilicat 13, Chlortrimethylsilan und Triethylamin in Acetonitril erhalten. Das l5Si-[Methanolato- (1–)]silicat 15 wurde durch die Umsetzung von Tetramethoxysilan mit Benzilsäure und Lithiummethanolat in Tetrahydrofuran dargestellt. Die l5Si,l5Si’-μ-Oxo-disilicate 10, 12 und 16 sind die ersten strukturell charakterisierten Verbindungen, in denen zwei pentakoordinierte Silicium-Atome mit SiO5-Skelett über ein gemeinsames Sauerstoff-Atom miteinander verbrückt sind. Sowohl ihre Reaktivität gegenüber Wasser, als auch ihr stereodynamisches Verhalten in Lösung, das mit 1H- und 13C-VT-NMR-Experimenten untersucht werden konnte, machen diese Verbindungen zu sehr lohnenden Studienobjekten für das Verständnis der Chemie des pentakoordinierten Siliciums. Mit den Verbindungen 11 und 13 wurden erstmals l5Si-Hydroxosilicate zugänglich gemacht und strukturell charakterisiert (unabhängig von einem kürzlich von P. Klüfers et al. veröffentlichten l5Si-Hydroxosilicat). Das l5Si-[Trimethylsilanolato(1–)]silicat 14 ist das erste Beispiel für die Verknüpfung eines pentakoordinierten und tetrakoordinierten Silicium-Atoms durch ein Sauerstoff-Atom und demonstriert die Zugänglichkeit der HO-Funktionaliät des l5Si-Hydroxosilicates 13 für Derivatisierungen. Das l5Si-[Methanolato(1–)]silicat 15 ist als Modellverbindung für die Bildung der l5Si-Hydroxosilicate 11 und 13 von mechanistischem und auch präparativem Interesse. 7.3 Synthese und Charakterisierung dianionischer l6Si-Silicate mit SiO6-Gerüst Im Rahmen der hier vorgestellten Untersuchungen wurden die bisher unbekannten dianionischen l6Si-Silicate 19–21 mit SiO6-Gerüst — lösungsmittelfrei oder in Form wohldefinierter Solvate — dargestellt. Die bereits bekannte Verbindung 18 wurde zwecks Kristallstrukturanalyse resynthetisiert. Die Charakterisierung aller synthetisierten Verbindungen erfolgte durch Elementaranalysen 1H-, 13C- und 29Si-NMR-Spektroskopie an Lösungen (mit Ausnahme von 19 und 21 [nur 1H- und 13C-NMR-Messungen]), 29Si-VACP/MAS-NMR-Spektroskopie am Festkörper sowie durch Röntgenbeugungs-Experimente an Einkristallen [18·2NH3·2H2O , mer-19, fac-20·½C4H8O2, (R,R/S,S)-21]. Die l6Si-Silicate 19–21 wurden durch Umsetzung von Tetramethoxysilan bzw. Tetrachlorsilan mit drei bzw. zwei Moläquivalenten des entsprechenden Amins dargestellt. Diese Verbindungen stellen die ersten l6Si-Silicate mit deprotonierten α-Hydroxycarbonsäuren als Liganden dar. Verbindung 21 ist darüber hinaus die erste Silicium-Verbindung mit dreizähnigen Citrato(3–)-Liganden. Neben einem allgemein erweiterten Verständnis der Chemie von l6Si-Silicaten mit SiO6-Gerüst geben die untersuchten Verbindungen insbesondere auch neue stereochemische Einblicke in die Koordinationschemie des Siliciums. In wieweit diese hier genannten l6Si-Silicate einen Beitrag zum Verständnis der Siliciumdioxid-Biomineralisation leisten können, bleibt abzuwarten. 7.4 Synthese und Charakterisierung von Verbindungen des tetrakoordinierten Siliciums Im Rahmen der hier vorgestellten Untersuchungen wurden erstmals die Silane 25 und 27 dargestellt, und die Synthesen der bereits bekannten Silicium-Verbindungen 22–24 konnten verbessert werden. Die Charakterisierung von 22–27 erfolgte durch Elementaranalysen 1H-, 13C- und 29Si-NMR-Spektroskopie an Lösungen, 29Si-VACP/MAS-NMR-Spektroskopie am Festkörper (nur 23×EtOAc), sowie durch Röntgenbeugung an Einkristallen (23×EtOAc, 25–27). Eine Verbesserung der Synthese von 22 gelang durch die Umsetzung von 1,2-Bis(diethylamino)-1,1,2,2-tetraphenyldisilan mit Acetylchlorid zum 1,2-Dichlor-1,1,2,2-tetraphenyldisilan und dessen nachfolgende Hydrolyse. Die Kristallisation des macrocyclischen Siloxans 23 konnte verbessert und das Solvat 23×EtOAc durch Röntgenbeugung strukturell charakterisiert werden. Bei der Umkristallisation von 22 wurden auch einzelne Kristalle des entsprechenden Disiloxans 26 erhalten, welches erstmals durch Kristallstrukturanalyse charakterisiert werden konnte. Das Silan 24 wurde auf zwei neuen Synthesewegen dargestellt: zum einen durch Umsetzung von Bis(chlormethyl)diphenylsilan mit Trifuormethansulfonsäure und anschließende Aufarbeitung mit Triethylammoniumchlorid, zum anderen durch Chlormethylierung von Chlor(chlormethyl)bis(diethylamino)silan mittels der Reagenzkombination BrCH2Cl/n-BuLi und anschließende Umsetzung mit Benzoylchlorid. Das Silan 25 wurde ausgehend von Trimethoxy[(2,2,6,6-tetramethylpiperidino)methyl]silan durch wiederholte Umsetzung mit Tetrachlorsilan erhalten, und das Silan 27 wurde ausgehend von Tetrachlorsilan durch vierfache Chlormethylierung mittels der Reagenzkombination BrCH2Cl/n-BuLi erhalten. N2 - This Thesis contributes to the field of silicon chemistry, with a special emphasis on the chemistry of penta- and hexacoordinate silicon. The results are summarized in the following four chapters. 8.1 Synthesis and characterization of zwitterionic l5Si-silicates In the course of these investigations, the hitherto unknown zwitterionic l5Si-silicates 3–8 were synthesized — solvent-free or as well-defined solvates. For the first time, the energy barrier for the enantiomerization of zwitterionic l5Si-spirosilicates in terms of a Berry-pseudorotation process could be determined by VT 1H NMR experiments using the already known l5Si-silicate 1. The hydrolysis of 1, followed by condensation reactions, yielded the novel octasilsesquioxane 2. The identities of all compounds were established by elemental analyses (C, H, N), solution NMR studies (1H, 13C, and 29Si; except for 2), and solid-state 29Si VACP/MAS NMR experiments. In addition, compounds 2, 3×½HO(CH2)2OH, 4×HO(CH2)2OH, 6, 7×3/2C4H8O2, and 8×2CH2Cl2 were structurally characterized by single-crystal X-ray diffraction. By means of the synthesis of 1 [obtained by treatment of dimethoxy(methyl)[(2,2,6,6-tetramethylpiperidino)methyl]silane with ethane-1,2-diol] it was demonstrated that ethane-1,2-diol can be used for the synthesis of zwitterionic l5Si-silicates via selective Si–C cleavage reactions (elimination of one molar equivalent of methane). For compound 1 the energy barrier for the enantiomerization process at the silicon atom was determined to be 35.3(5) kJ mol–1 (VT 1H NMR experiments). Treatment of 1 with water in dichloromethane at room temperature gave the aminomethyl-substituted octasilsesquioxane 2. Compounds 3–5 were synthesized by reaction of the respective trialkoxy[(amino)alkyl]silane with ethane-1,2-diol using no solvent (3) or using acetonitrile as solvent (4 and 5). The already known compound 6 was resynthesized to characterize it by single-crystal X-ray diffraction. Treatment of trimethoxy[(2,2,6,6-tetramethylpiperidino)methyl]silane with benzoin yielded compound 7. Treatment of dimethoxy(methyl)[(2,2,6,6-tetramethylpiperidino)methyl]silan with pyrocatechol gave the first zwitterionic l5Si-silicate with an SiO3C2 skeleton, compound 8. In boiling acetonitrile, 8 undergoes an elimination reaction (formation of methane) to yield the known l5Si-spirosilicate 9. 8.2 Synthesis and characterization of anionic l5Si-silicates and dianionic l5Si,l5Si’-disilicates with SiO5 skeletons In the course of these investigations, the anionic l5Si-silicates 11 and 13–15 and the dianionic l5Si,l5Si’-disilicates 10, 12, and 16 with SiO5 skeletons were synthesized for the first time — solvent-free or as well-defined solvates. The identities of these compounds were established by elemental analyses (C, H, N), solution NMR studies (1H, 13C, and 29Si), and solid-state 29Si VACP/MAS NMR experiments. In addition, compounds (Δ,Δ/Λ,Λ)-10×2CH3CN, (Λ)-11×THF, meso-12×2CHCl3, 13, 14, 15×2THF, und meso-16 were structurally characterized by single-crystal X-ray diffraction. The syntheses of the l5Si-silicates 10–13 and 16 were performed in aprotic organic solvents by treatment of tetramethoxysilane with, benzilic acid, the respective amine, and water, using the required stoichiometry. The [trimethylsilanolato(1–)]silicate 14 was obtained from the hydroxosilicate 13, chlorotrimethylsilane, and triethylamine in acetonitrile. The [methanolato(1–)]silicate 15 was synthesized by treatment of tetramethoxysilane with benzilic acid and lithium methanolate in tetrahydrofuran. The μ-oxo-disilicates 10, 12, and 16 are the first compounds, with two pentacoordinate oxygen-bridged silicon atoms with SiO5 skeletons that could be structurally characterized by single-crystal X-ray diffraction. Both their reactivity toward water and their stereodynamics in solution (studied by VT 1H and 13C NMR experiments) make these compounds unique objects in the study of pentacoordinate silicon compounds. Compounds 11 and 13 are the first pentacoordinate l5Si-hydroxosilicates that have been synthesized and structurally characterized (independently from a l5Si-hydroxosilicate recently published by Klüfers et al.). The l5Si-[trimethylsilanolato(1–)]silicate 14 represents the first example of a compound containing an oxygen-bridged pentacoordinate and tetracoordinate silicon atom. With respect to mechanistic and preparative aspects, the l5Si-[methanolato(1–)]silicate 15 is a model system for the formation of the l5Si-hydroxosilicates 11 and 13. 8.3 Synthesis and characterization of dianionic l6Si-silicates with SiO6 skeletons In the course of these investigations, the dianionic l6Si-silicates 19–21 with SiO6 skeletons were synthesized for the first time — solvent-free or as well-defined solvates. The already known compound 18 was resynthesized for its characterization by crystal structure analysis. The identities of all compounds were established by elemental analyses (C, H, N), solution NMR studies (1H, 13C, and 29Si except for 18, only 29Si NMR for 20), and solid-state 29Si VACP/MAS NMR experiments. In addition, compounds 18·2NH3·2H2O, mer-19, fac-20·½C4H8O2, and (R,R/S,S)-21 were structurally characterized by single-crystal X-ray diffraction. The l6Si-silicates 19–21 were synthesized by reaction of tetramethoxysilane or tetrachlorosilane with two or three molar equivalents of the respective α-hydroxy carboxylic acid and two molar equivalents of the respective amine. Compounds 19–21 represent the first l6Si-silicates with ligands derived from α-hydroxycarboxylic acids. In addition, 21 is the first silicon compound containing tridentate citrato(3–) ligands. Apart from the expanded knowledge about l6Si-silicates with SiO6 skeletons, the compounds studied allow some insight into the stereochemistry of such compounds. It remains an open question as to whether or not l6Si-silicates of this particular formula type have any potential relevance for silicon biochemistry (SiO2 biomineralization). 8.4 Synthesis and characterization of tetracoordinate silicon compounds In the course of these investigations, the silanes 25 and 27 were synthesized for the first time, and the syntheses of the already known compounds 22–24 could be improved. The identities of all compounds were established by elemental analyses (C, H, N), solution NMR studies (1H, 13C, and 29Si), and solid-state 29Si VACP/MAS NMR experiments (23×EtOAc only). In addition, compounds 23×EtOAc and 25–27 were structurally characterized by single-crystal X-ray diffraction. The improved synthesis of 22 was achieved by the reaction of 1,2-bis(diethylamino)-1,1,2,2-tetraphenyldisilane with acetyl chloride to give 1,2-dichloro-1,1,2,2-tetraphenyldisilane, followed by its hydrolysis. The crystallization of the macrocyclic siloxane 23 could be improved, and the solvate 23×EtOAc was structurally characterized by X-ray diffraction. In the course of the crystallization of 22, also crystals of the corresponding disiloxane 26 were obtained that allowed a structural characterization by single-crystal X-ray diffraction. The silane 24 was synthesized by using two novel strategies, (i) the reaction of bis(chloromethyl)diphenylsilane with trifluoromethanesulfonic acid, followed by triethylammonium chloride, and (ii) the chloromethylation of chloro(chloromethyl)bis(diethylamino)silane with BrCH2Cl/n-BuLi, followed by reaction with benzoyl chloride. The silane 27 was synthesized from tetrachlorosilane by a four-fold chloromethylation with BrCH2Cl/n-BuLi. The silane 25 was synthesized from trimethoxy[(2,2,6,6-tetramethylpiperidino)methyl]silane by repeated treatment with tetrachlorosilane. KW - Silicate KW - Silicium KW - Pentakoordination KW - Tetrakoordinierte Verbindungen KW - Chemische Synthese KW - Silicium KW - Pentakoordination KW - Hexakoordination KW - Silane KW - Siloxane KW - silicon KW - pentacoordination KW - hexacoordination KW - silanes KW - siloxanes Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2972 ER - TY - THES A1 - Vögler, Matthias T1 - Zweifach Eisen-substituierte Silane, Silanole und Siloxane T1 - Double iron substituted Silanes, Silanols and Siloxanes N2 - Die vorliegende Dissertation beschäftigt sich mit der Darstellung Übergangsmetall-substitutierter Silane und Untersuchungen zum Einfluss verschiedener Übergangsmetallsubstituenten auf die chemischen und spektroskopischen Eigenschaften dieser Klasse von Siliciumverbindungen. Dabei steht insbesondere die Synthese mehrfach metallierter Silanole und Siloxane im Vordergrund. A – Halogenierte Bis(metallo)silane: Durch schrittweise Umsetzung von HSiCl3 oder HSiCl2Me mit den Übergangsmetallaten Na[Fe(CO)2Cp] oder Li[W(CO)2PMe3Cp] wurden verschiedene bismetalliete Silane [LnM]2SiRCl (R = H, Me) aufgebaut. Durch weitere Derivatisierung konnten u.a. die Bis(ferrio)silane [Cp(OC)2Fe]2SiX2 (X = F, Cl, Br, I) dargestellt und z. T. durch Röntgenstrukturen charakterisiert werden. Aus diesen Verbindungen lassen sich durch photochemische CO-Eliminierung die µ2-silylenverbrückten Komplexe [Cp(OC)Fe]2(µ2-CO)(µ2-SiRHal) (R = Me, Halogen) gewinnen. B – Bis(metallo)silanole und –siloxane: Die unter A hergestellten Verbindungen dienten als Vorstufen zur Synthese der neuen Bis(ferrio)silanole [Cp(OC)2Fe]2SiX(OH) (X = H, Cl, OH) und des hetero-bismetallierten Silanols [Cp(OC)2Fe][Cp(OC)2PMe3]SiMe(OH). Dabei konnte lediglich [Cp(OC)2Fe]2SiH(OH) durch Hydrolyse des entsprechenden halogenierten Bis(ferrio)silans hergestellt werden. Alle anderen Bis(metallo)silanole wurden durch Oxygenierung der jeweiligen SiH-funktionellen Vorstufen mit Hilfe von Dimethyldioxiran synthetisiert. Alle Bis(metallo)silanole sind stabil bezüglich Eigenkondensation, lassen sich aber mit ClSiMe2H in die entsprechenden Siloxane [LnM]2SiR(OSiMe2H) umwandeln. C – Co2(CO)2 assistierte Hydrolyse von Silanen: Die Umsetzung verschiedener Si-H-funktioneller Silane R3Si-H mit Dicobaltoctacarbonyl führt unter H2-Entwicklung zu Cobaltio-Silanen R3Si-Co(CO)4. Diese besitzen eine extrem labile Si-CoBindung, welche sich durch zahlreiche protische Reagenzien spalten läßt. Es wurden u. a die Cobaltio-Silane Me3SiOSiMe2-Co(CO4), Me(OMe)2Si-Co(CO)4 und Ph2SiCo2(CO)7 generiert und durch Hydrolyse in verschiedene Silanole oder Siloxane überführt. Eine direkte hydrolytische SiH/SiOH-Umwandlung ist auch in Gegenwart katalytischer Mengen Co2(CO)8 möglich und wurde u.a. zur Darstellung des Bis(ferrio)siloxanols [Cp(OC)2Fe]2Si(OH)(OSiMe2H) genutzt. D – DFT-Berechnungen an Übergangsmetallverbindungen von Silicium und Phosphor: Die Strukturen der dimeren Siloxygallane (RH2SiOGaMe2)2 (R = H, tBu) wurden theoretisch berechnet. Man findet eine starke Abhängigkeit der Geometrie des zentralen viergliedrigen Ga-O-Ga-O-Ringes von Größe und relativen Position der exocyclischen Substituenten R. Struktur- und NBO-Analyse des cyclischen Metallasiloxans Cp(OC)(H)Fe[SiMe2O]2SiMe2 belegen den Einfluß des Cp(OC)(H)Fe-Fragmentes auf Struktur und Bindungsverhältnisse des Heterosiloxan Ringes. Relative thermodynamische Stabilitäten wurden für die diastereomeren Formen des kationischen Phosphankomplexe lk/ul-Cp*(OC)2Fe-P(Ph)(H)[CH(CO2Me)CH2CO2Me]+ und des µ2-silylenbrückten Eisenkomplexes cis/trans-[Cp(OC)Fe]2(µ2-CO)(µ2-SiH2) theoretisch berechnet. N2 - The present Ph.D. thesis is dealing with the preparation of transition metal substituted silanes and with studies concerning the influence of various transition metal substituents on the chemical and spectroscopic properties on this class of silicon compounds. Special emphasis is laid upon the synthesis of silanols and siloxanes with multiple metal substituents A – Halogenated bis(metallo)silanes: Several bismetalated silanes [LnM]2SiRCl (R = H, Me) have been prepared by stepwise metalation of HSiCl3 or HSiCl2Me with the metalates Na[Fe(CO)2Cp] and Li[W(CO)2PMe3Cp]. Of these metallosilanes further derivatives have been prepared, e. g. the halogenated bis(ferrio)silanes [Cp(OC)2Fe]2SiX2 (X = F, Cl, Br, I), some of which could by characterized by X-ray structures. Photochemical CO elimination from these compounds yields µ2-silylene bridged complexes of the type [Cp(OC)Fe](µ2-CO)(µ2SiRHal) (R = Me, halogen). B – Bis(metallo)silanols and –siloxanes: The compounds prepared in chapter A have served as precursors in the synthesis of the novel bis(ferrio)silanols [Cp(OC)2Fe]2SiX(OH) (X = H, Cl, OH) and the hetero-bismetalated silanol [Cp(OC)2Fe][Cp(OC)2PMe3]SiMe(OH). Only [Cp(OC)2Fe]2SiH(OH) could be prepared via hydrolysis of the respective halogenated bis(ferrio)silane. The other bis(metallo)silanols were prepared by oxygenation of the SiH functional precursors using dimethyldioxirane. All bis(metallo)silanols are stable with respect to self condensation but can be readily converted with ClSiMe2H into the siloxanes [LnM]2SiR(OSiMe2H). C – Co2(CO)8 assisted hydrolysis of silanes: Reaction of various SiH functional silanes R3SiH with dicobaltoctacarbonyl leads to the formation of H2 and the cobaltio-silanes R3Si-Co(CO)4. The Si-Co bond in these metallosilanes is extremely weak and can be easily cleaved by protic solvents. Several cobaltio-silanes including Me3SiOSiMe2-Co(CO4), Me(OMe)2Si-Co(CO)4 and Ph2SiCo2(CO)7 have been generated and then converted by hydrolysis into silanols or siloxanes. A direct hydrolytic SiH/SiOH transformation can also be achieved in the presence of catalytic amounts of Co2(CO)8. This procedure has been used e.g. for the preparation of the bis(ferrio)siloxanol [Cp(OC)2Fe]2Si(OH)(OSiMe2H). D – DFT calculations of transition metal substituted compounds of silicon and phosphorous: The molecular structure of the dimeric siloxygallanes (RH2SiOGaMe2)2 (R = H, tBu) has been calculated. A significant dependence of the geometry of the central four membered Ga-O-Ga-O ring on size and relative position of the exocyclic substituents R was found. The calculated structure and NBO analysis of the cyclic metallasiloxane Cp(OC)(H)Fe[SiMe2O]2SiMe2 are demonstrating the impact of the Cp(OC)(H)Fe-fragment on structure and bonding within the hetero-siloxane ring. The relative thermodynamic stabilities of the diastereomeric forms of the cationic phosphane complex lk/ul-Cp*(OC)2Fe-P(Ph)(H)[CH(CO2Me)CH2CO2Me]+ and the µ2-silylene bridged iron complex cis/trans-[Cp(OC)Fe]2(µ2-CO)(µ2-SiH2) have been calculated. KW - Eisenkomplexe KW - Siliciumorganische Verbindungen KW - Chemische Synthese KW - Silicium KW - Silanole KW - Siloxane KW - Übergangsmetall KW - Oxofunktionalisierug KW - DFT KW - silicon KW - silanol KW - siloxane KW - transition metal KW - oxofunctionalization KW - DFT Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1181568 ER - TY - THES A1 - Hofmann, Marco T1 - Ferriomethyl- und Wolframiomethyl-substituierte Silane, Silanole und Siloxane T1 - Ferriomethyl- and Tungsteniomethyl-substituted silanes, silanols and siloxanes N2 - Das Interesse an Übergangsmetall-substituierten Siloxanen ist in den vergangenen Jahren stark angewachsen. Dies ist vor allem darauf zurückzuführen, dass diesen Systemen eine wichtige Modellfunktion für auf Silica-Oberflächen verankerte, katalytisch aktive Übergangsmetallkomplexe zukommt, die eine Vielzahl organischer Reaktionen katalysieren und dabei sowohl die Vorteile der Homogenkatalyse als auch der Heterogenkatalyse in einem einzigen System vereinen. Weiterhin kommt ihnen auch eine wichtige Bedeutung als Vorstufen zur Darstellung von Silicon-Polymeren und Keramiken zu, die definierte Metallzentren in ihrem Polymer-Grundgerüst enthalten und somit als neue Werkstoffe mit hoher mechanischer und thermischer Stabilität sowie ausgezeichneten leitenden Eigenschaften dienen können. Metallosiloxane mit einer direkten Metall-Silicium-Bindung können über die entsprechenden Metallo-silanole generiert werden, die seit Beginn der 90er Jahre eine intensivere Bearbeitung erfahren. In dieser Arbeit wurden die ersten Vertreter von Metallo-silanolen dargestellt und bezüglich ihrer Reaktivität untersucht, in denen das Metall- und Siliciumatom durch einen Alkylidenspacer getrennt ist. Es wurde zunächst eine Reihe von C5R5(OC)2FeCH2-substituierten Silanolen über die Et3N-assistierte Hydrolyse von Ferriomethyl-chlorsilanen bzw. Oxygenierung von Si-H-funktionellen Ferriomethyl-silanen mit Dimethyldioxiran dargestellt. Die Stabilisierung durch das Metallfragment in β-Stellung zur Silanoleinheit erweist sich ebenfalls hinreichend für die Darstellung von Ferriomethyl-silandiolen und –silantriolen, wie anhand der Darstellung von Cp(OC)2Fe-CH2-Si(R)(OH)2 (R = Me, OH) nachgewiesen werden konnte. Allerdings zeigen diese Vertreter im Vergleich zu ihren Analoga mit direkter Fe-Si-Bindung eine z.T. deutlich erhöhte Eigenkondensationsneigung. Die Röntgenstrukturanalysen der Ferriomethyl-diorganosilanole C5R5(OC)2Fe-CH2-Si(Me)(R’)OH belegen deren Aggregation zu Tetrameren bzw. unendlichen Ketten im Festkörper über starke intermolekulare OH...O-Wasserstoffbrückenbindungen. Durch Et3N-assistierte Kondensation mit Organochlorsilanen, wie z.B. Me2Si(H)Cl lassen sich kontrolliert Ferriomethyl-substiuierte Di-, Tri- und Tetrasiloxane generieren. Auch der Aufbau von mehrkernigen Heterosiloxangerüsten ist möglich, wie exemplarisch anhand der Synthese von Cp(OC)2Fe-CH2-SiMe2O-M(Cl)Cp2 (M = Ti, Zr) überprüft wurde. Weiterhin können auch Modifikationen am Metallfragment vorgenommen werden, wie der photochemisch induzierte CO/PR3-Austausch an Cp(OC)2-CH2-SiMe2OH beweist. Die synthetisierten Ferriomethyl-siloxane mit δ-ständiger Si-H-Funktion eignen sich für weitere Umsetzungen, wie z.B. der oxidativen Addition der Si-H-Funktion an ungesättigte Metallfragmente. So lassen sich das Tri- bzw. Tetrasiloxan Cp(OC)2Fe-CH2-Si(R)(OSiMe2H)2 (R = Me, OSiMe2H) durch UV-Bestrahlung unter CO-Eliminierung glatt in die Cyclo(ferra)siloxane Cp(OC)(H)Fe-SiMe2-OSi(Me)(R)-OSiMe2 überführen. Abschließend wurde überprüft, ob sich die Chemie der Ferriomethyl-silanole auch auf andere Übergangsmetallfragmente übertragen lässt. Hierbei konnten Wolframiomethyl-silanole mit dem Cp(OC)2(Me3P)WCH2-Fragment dargestellt werden, wobei sich, im Gegensatz zu den Eisenvertretern, die Darstellungsmethode der Oxygenierung von Si-H-funktionellen Vorläufern als vorteilhafter erweist. N2 - The interest in transition metal substituted siloxanes has rapidly grown in recent years. This is mainly due to their ability to serve as model systems for catalytically active transition metal complexes immobilized on a silica surface combining the advantages of homogeneous as well as those of heterogeneous catalysis in one system. In addition, these systems are also considered as precursors in the production of silicon polymers and ceramics with well-defined metal centres in the polymer backbone and can so be applied as new materials with good mechanical and thermal stability and excellent conducting properties. Metallo-siloxanes with a direct metal-silicon bond can be generated via the corresponding metallo-silanols which raised a greater attention in the last ten years. In this work the first examples of metallo-silanols have been synthesized and studied in which the metal and silicon atom are separated by an alkylidene spacer group. A number of C5R5(OC)2FeCH2-substituted silanols has been generated via Et3N-assisted hydrolysis of ferriomethyl-chlorosilanes and oxygenation of Si-H-functional ferriomethyl-silanes with dimethyldioxirane, respectively. The stabilizing effect of the metal fragment in β-position to the silanol unit is sufficient for the isolation of ferriomethyl-silanediols und –silanetriols as could be demonstrated in the synthesis of Cp(OC)2Fe-CH2-Si(R)(OH)2 (R = Me, OH). However, these compounds show an enhanced tendency to self-condensation compared to their analogues with a direct metal-silicon bond. The X-ray structure analyses of the ferriomethyl-diorganosilanols C5R5(OC)2Fe-CH2-Si(Me)(R’)OH show their aggregation to tetramers or infinite chains in the solid state, respectively, via strong intermolecular OH...O hydrogen bonds. Ferriomethyl-substiuted di-, tri- and tetrasiloxanes can be generated by controlled Et3N-assisted condensation with organochlorosilanes, e.g. Me2Si(H)Cl. Even binuclear heterosiloxanes can be synthesized as was proved by the synthesis of Cp(OC)2Fe-CH2-SiMe2O-M(Cl)Cp2 (M = Ti, Zr). In addition, there are also modifications at the metal fragment possible like the photochemically induced CO/PR3 substitution at Cp(OC)2-CH2-SiMe2OH. Ferriomethyl-siloxanes with a Si-H function in δ-position are suitable for further modifications, e.g. oxidative addition of the Si-H function to electronically unsaturated metal fragments. UV irradiation of the tri- and tetrasiloxanes Cp(OC)2Fe-CH2-Si(R)(OSiMe2H)2 (R = Me, OSiMe2H) leads to CO elimination producing the cyclo(ferra)siloxanes Cp(OC)(H)Fe-[SiMe2-OSi(Me)(R)-OSiMe2]. Finally it was examined if the chemistry of ferriomethyl-silanols can be transferred to compounds with other transition metal fragments. Tungsteniomethyl-silanols with a Cp(OC)2(Me3P)WCH2 fragment can be generated, whereas in contrast to the synthesis of ferriomethyl-silanols, the oxygenation method via Si-H functional precursors is more favourable. KW - Übergangsmetallkomplexe KW - Siliciumorganische Verbindungen KW - Chemische Synthese KW - Metallo-silanole KW - Metallo-siloxane KW - Hydrolyse KW - Oxygenierung KW - Kondensation KW - metallo-silanols KW - metallo-siloxanes KW - hydrolysis KW - oxygenation KW - condensation Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1181579 ER - TY - THES A1 - Boras, Mihael T1 - Primär-Phosphankomplexe und sekundäre Metallo-phosphane des Molybdäns und Wolframs T1 - Primary phospine complexes of molybdenum and tungsten N2 - Cyclopentadienyl-Triscarbonyl-Primärphosphankomplexe des Molybdäns und Wolframs lassen sich leicht aus den komplexen Metallhydriden mittels Hydridabstraktion und Zugabe des entsprechenden primären Phosphans synthetisieren. Die so erzeugten primären Phosphankomplexe lassen sich mit Triethylamin in die entsprechenden sekundären Metallo-phosphane überführen. Aufgrund ihrer ausgeprägten Nukleophilie können die Metallo-phosphane einer Vielzahl an Oxidationsreaktionen unterworfen werden und reagieren mit sanften Oxygenierungsmitteln wie 1,1-Dimethyldioxiran zu den entsprechenden Metallo-phosphanoxiden oder mit elementarem Schwefel bzw. Selen zu Chalkogen-phosphoranen und verwandten Verbindungen. Die oben beschriebenen Primärphosphankomplexe stellen Ausgangsverbindungen für die Reaktion mit elektronenarmen organischen Mehrfachbindungssystemen dar. Dabei wird durch die Zugabe katalytischer Mengen einer Base wie z.B. Triethylamin intermediär das korrespondierende Metallo-phosphan generiert das als Nukleophil an der Mehrfachbindung angreift. Abschließende Reprotonierung führt zur Ausbildung eines sekundären Phosphankomplexes, wobei formal eine Insertion des ungesättigten Systems (z.B. Maleinsäuredimethylester) in eine P-H-Bindung erfolgt. Auch Metallo-phosphane können für Insertionsreaktionen genutzt werden, wobei mit elektronenarmen Alkinen der Aufbau von Phosphabenzolderivaten gelingt. N2 - Cyclopentadienyl-triscarbonyl-primary-phosphine complexes of molybdenum and tungsten can be easily prepared by hydride abstraction and addition of the corresponding phosphine starting with the metal hydrides. The thus formed primary phosphine complexes can be converted into the corresponding secondary metallo-phosphines using triethylamine. Due to their nucleophilic behaviour the metallo-phosphines can be used for oxygenation reactions. They react with 1,1-dimethyldioxirane to the corresponding metallo-phosphine-oxides or with elemental sulfur or selen to chalkogene-phosphoranes and related compounds. The primary phosphine complexes are starting materials for the reaction of electron deficient organic multiple bond systems. Addition of catalytic amounts of a base e.g. triethylamine leads to the generation of metallo-phosphines, a nucleophilic compounds that attacks the multiple bond. Reprotonation generates a secondary phosphine complexe as a result of an insertion of the unsaturated system (e.g. maleinic acid dimethylester) into a P-H bond. Metallo-phosphines can also be used for insertion reactions. Thus the use of electron deficient alkynes leads to the formation of phosphabenzene derivatives. KW - Übergangsmetallkomplexe KW - Sechste Nebengruppe KW - Phosphine KW - Molybdän KW - Phosphane KW - Wolfram KW - Metallkomplexe KW - Primärphosphankomplexe KW - Metallo-phosphan KW - Hydrophosphinierung KW - Wolfram KW - Molybdän KW - primary phosphine complexes KW - metallo-phosphines KW - hydrophosphination KW - tungsten KW - molybdenum Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-1281 ER -