TY - THES A1 - Spenst, Peter T1 - Xylylene Bridged Perylene Bisimide Cyclophanes and Macrocycles T1 - Xylol verbrückte Perylenbisimid Cyclophane und Makrozyklen N2 - This work is concerned with the syntheses and photophysical properties of para-xylylene bridged macrocycles nPBI with ring sizes from two to nine PBI units, as well as the complexation of polycyclic aromatic guest compounds. With a reduced but substantial fluorescence quantum yield of 21% (in CHCl3) the free host 2PBI(4-tBu)4 can be used as a dual fluorescence probe. Upon encapsulation of rather electron-poor guests the fluorescence quenching interactions between the chromophores are prevented, leading to a significant fluorescence enhancement to > 90% (“turn-on”). On the other hand, the addition of electron-rich guest molecules induces an electron transfer from the guest to the electron-poor PBI chromophores and thus quenches the fluorescence entirely (“turn-off”). The photophysical properties of the host-guest complexes were studied by transient absorption spectroscopy. These measurements revealed that the charge transfer between guest and 2PBI(4-tBu)4 occurs in the “normal region” of the Marcus-parabola with the fastest charge separation rate for perylene. In contrast, the charge recombination back to the PBI ground state lies far in the “inverted region” of the Marcus-parabola. Beside complexation of planar aromatic hydrocarbons into the cavity of the cyclophanes an encapsulation of fullerene into the cyclic trimer 3PBI(4-tBu)4 was observed. 3PBI(4-tBu)4 provides a tube-like structure in which the PBI subunits represent the walls of those tubes. The cavity has the optimal size for hosting fullerenes, with C70 fitting better than C60 and a binding constant that is higher by a factor of 10. TA spectroscopy in toluene that was performed on the C60@3PBI(4-tBu)4 complex revealed two energy transfer processes. The first one comes from the excited PBI to the fullerene, which subsequently populates the triplet state. From the fullerene triplet state a second energy transfer occurs back to the PBI to generate the PBI triplet state. In all cycles that were studied by TA spectroscopy, symmetry-breaking charge separation (SB-CS) was observed in dichloromethane. This process is fastest within the PBI cyclophane 2PBI(4-tBu)4 and slows down for larger cycles, suggesting that the charge separation takes place through space and not through bonds. The charges then recombine to the PBI triplet state via a radical pair intersystem crossing (RP-ISC) mechanism, which could be used to generate singlet oxygen in yields of ~20%. By changing the solvent to toluene an intramolecular folding of the even-numbered larger cycles was observed that quenches the fluorescence and increases the 0-1 transition band in the absorption spectra. Force field calculations of 4PBI(4-tBu)4 suggested a folding into pairs of dimers, which explains the remarkable odd-even effect with respect to the number of connected PBI chromophores and the resulting alternation in the absorption and fluorescence properties. Thus, the even-numbered macrocycles can fold in a way that all chromophores are in a paired arrangement, while the odd-numbered cycles have open conformations (3PBI(4-tBu)4, 5PBI(4-tBu)4, 7PBI(4-tBu)4) or at least additional unpaired PBI unit (9PBI(4-tBu)4). With these experiments we could for the first time give insights in the interactions between cyclic PBI hosts and aromatic guest molecules. Associated with the encapsulation of guest molecules a variety of possible applications can be envisioned, like fluorescence sensing, chiral recognition and photodynamic therapy by singlet oxygen generation. Particularly, these macrocycles provide photophysical relaxation pathways of PBIs, like charge separation and recombination and triplet state formation that are hardly feasible in monomeric PBI dyes. Furthermore, diverse compound specific features were found, like the odd-even effect in the folding process or the transition of superficial nanostructures of the tetrameric cycle influenced by the AFM tip. The comprehensive properties of these macrocycles provide the basis for further oncoming studies and can serve as an inspiration for the synthesis of new macrocyclic compounds. N2 - In dieser Arbeit wurde die Synthese para-Xylol-verbrückter Makrozyklen nPBI mit Ringgrößen von zwei bis neun PBI Einheiten beschrieben und deren photophysikalische Eigenschaften sowie Komplexierungsvermögen für polyzyklische aromatische Gastverbindungen analysiert. Mit einer reduzierten, aber noch substantiellen Fluoreszenzquantenausbeute von 21% in CHCl3 eignet sich der freie Wirt 2PBI(4-tBu)4 als dualer Fluoreszenzsensor. Durch die Aufnahme von elektronenarmen Gästen wird die zur Fluoreszenzlöschung führende Wechselwirkung zwischen den Chromophoren unterbunden, was sich in einer deutlichen Steigerung der Fluoreszenzquantenausbeute auf > 90% widerspiegelt („turn-on”). Andererseits führt die Zugabe elektronenreicher Gäste zu einem Elektronentransfer vom Gast auf die elektronenarmen PBI-Chromophore und quencht die Fluoreszenz damit nahezu vollständig („turn-off”). Die photophysikalischen Eigenschaften der Wirt-Gast Komplexe wurden mittels transienter Absorptionsspektroskopie weitergehend untersucht. Diese Studien zeigten, dass die Ladungstrennung zwischen Gast und 2PBI(4-tBu)4 in der „normalen Region“ der Marcus-Parabel stattfindet mit der schnellsten Ladungstrennungsrate für Perylen. Im Gegensatz dazu liegt die Ladungsrekombination zurück zum PBI Grundzustand weit in der „invertierten Region“ der Marcus-Parabel. Neben der Komplexierung flacher aromatischer Kohlenwasserstoffe in die Kavitäten der Cyclophane konnte auch die Aufnahme von Fullerenen in das zyklische Trimer 3PBI(4 tBu)4 beobachtet werden. 3PBI(4-tBu)4 weist eine röhrenartige Struktur auf, in der die PBI-Untereinheiten die Wände der Röhren darstellen. Damit hat die Kavität die optimale Größe für die Aufnahme von Fullerenen, wobei C70 besser hinein passt als C60 und damit eine um den Faktor 10 höhere Bindungskonstante besitzt. Transiente Absorptions-spektroskopie des C60@3PBI(4-tBu)4 Komplexes zeigte in Toluol zwei Energietransfer-prozesse auf. Der erste erfolgt vom angeregten PBI zum Fulleren, welches daraufhin den Triplettzustand populiert. Vom Fulleren-Triplettzustand erfolgt ein zweiter Energie-transfer zurück zum PBI, was schließlich im PBI-Triplett Zustand mündet. Für alle mittels transienter Absorptionsspektroskopie untersuchten Zyklen konnte eine symmetriebrechende Ladungstrennung in Dichlormethan beobachtet werden. Dieser Prozess ist für das PBI Cyclophan 2PBI(4-tBu)4 am schnellsten und wird mit zunehmender Ringgröße langsamer. Demnach ist die Ladungstrennung abhängig von der räumlichen Nähe der PBI Chromophore und nicht von deren Verbrückung. Im Anschluss erfolgt eine Ladungsrekombination zum PBI-Triplettzustand über ein Radikalpaar (radical pair intersystem crossing RP-ISC-Mechanismus), was zur Gewinnung von Singulettsauerstoff in Ausbeuten von ~20% genutzt werden konnte. Bei Verwendung von Toluol als Lösungsmittel wurde eine intramolekulare Faltung der geradzahligen größeren Zyklen beobachtet, wodurch die Fluoreszenz gequencht und die 0-1 Übergangsbande der Absorption verstärkt wird. Kraftfeldberechnungen für 4PBI(4 tBu)4 legen eine Faltung zu Dimerpaaren nahe, welche den außergewöhnlichen gerade-ungerade Effekt bezogen auf die Anzahl der verknüpften PBI Chromophore und die daraus resultierende Alternanz in den Absorptions- und Fluoreszenzeigenschaften erklärt. Dementsprechend können die geradzahligen Makrozyklen in der Art falten, dass alle Chromophore in einer gepaarten Anordnung vorliegen, während die ungeradzahligen Zyklen offene Konformationen (3PBI(4 tBu)4, 5PBI(4 tBu)4, 7PBI(4 tBu)4) oder zumindest teilweise ungepaarte PBI-Einheiten (9PBI(4 tBu)4) aufweisen. Mit zunehmender Ringgröße erhöht sich der Anteil an gefalteten Untereinheiten, was dazu führt, dass sich die optischen Eigenschaften des ungeradzahligen 9PBI(4 tBu)4 Zyklus den vollständig gefalteten Systemen angleicht. Mit diesen Experimenten konnten wir erstmals Enblicke in die Wechselwirkungen zwischen zyklischen PBI-Wirten und aromatischen Gastmolekülen geben. Verbunden mit der Aufnahme von Gastmolekülen ist eine Reihe möglicher Anwendungen wie Fluoreszenzsensorik, Chiralitätserkennung und photodynamische Therapie über die Generierung von Singulettsauerstoff denkbar. Insbesondere ermöglichen diese Makrozyklen photophysikalische Relaxationspfade von PBIs wie die Ladungstrennung und –rekombination und die Ausbildung von Triplettzuständen, welche in monomeren PBI-Frabstoffen nur schwer realisierbar sind. Weiterhin konnten einige verbindungs-spezifische Eigenschaften gefunden werden, wie den gerade-ungerade Effekt im Faltungsprozess oder die für den tetrameren Zyklus gefundene Umwandlung von Oberflächennanostrukturen unter dem Einfluß der AFM-Spitze. Die reichhaltigen Eigenschaften dieser Makrozyklen bilden damit die Basis für weitergehende Untersuchungen und können als Inspiration für die Synthese neuer makrozyklischer Verbindungen dienen. KW - Supramolekulare Chemie KW - Wirt-Gast-Beziehung KW - Perylenbisimid KW - Energietransfer KW - Elektronentransfer KW - Perylene Bisimide KW - Energy Transfer KW - Electron Transfer KW - Elektronentransfer KW - Perylenderivate KW - Wirt-Gast-Komplex-Chemie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-139015 ER - TY - THES A1 - Mahlmeister, Bernhard T1 - Twisted Rylene Bisimides for Organic Solar Cells and Strong Chiroptical Response in the Near Infrared T1 - Kernverdrillte Rylenbisimide für organische Solarzellen und starke chirooptische Eigenschaften im Nahinfrarot N2 - The chirality of the interlocked bay-arylated perylene motif is investigated upon its material prospect and the enhancement of its chiroptical response to the NIR spectral region. A considerable molecular library of inherently chiral perylene bisimides (PBIs) was utilized as acceptors in organic solar cells to provide decent device performances and insights into the structure-property relationship of PBI materials within a polymer blend. For the first time in the family of core-twisted PBIs, the effects of enantiopurity on the device performance was thoroughly investigated. The extraordinary structural sensitivity of CD spectroscopy served as crucial analytical tool to bridge the highly challenging gap between molecular properties and device analytics by proving the excitonic chirality of a helical PBI dimer. The chirality of this perylene motif could be further enhanced on a molecular level by both the expansion and the enhanced twisting of the π-scaffold to achieve a desirable strong chiroptical NIR response introducing a new family of twisted QBI-based nanoribbons. These achievements could be substantially further developed by expanding this molecular concept to a supramolecular level. The geometrically demanding supramolecular arrangement necessary for the efficient excitonic coupling was carefully encoded into the molecular design. Accordingly, the QBIs could form the first J-type aggregate constituting a fourfold-stranded superhelix of a rylene bisimide with strong excitonic chirality. Therefore, this thesis has highlighted the mutual corroboration of experimental and theoretical data from the molecular to the supramolecular level. It has demonstrated that for rylene bisimide dyes, the excitonic contribution to the overall chiroptical response can be designed and rationalized. This can help to pave the way for new organic functional materials to be used for chiral sensing or chiral organic light-emitting devices. N2 - Die Chiralität des verzahnten Bucht-arylierten Perylenmotivs wurde im Hinblick auf seine Materialanwendung sowie die Verstärkung seiner chiroptischen Eigenschaften im NIR-Spektralbereich untersucht. Eine umfangreiche Molekülbibliothek von inhärent chiralen PBIs wurde als NFAs in OSCs verwendet, um sowohl gute Solarzelleneffizienzen sowie Einblicke in die Struktur-Eigenschafts-Beziehung von PBI Materialien innerhalb einer Polymermischung zu erhalten. Zum ersten Mal wurden für kernverdrillte PBIs die Auswirkungen der Enantiomerenreinheit auf die Effizienz von organischen Dünnfilmbauteilen untersucht. Die außerordentliche strukturelle Empfindlichkeit der CD Spektroskopie diente als entscheidendes Analysewerkzeug, um die hoch anspruchsvolle Lücke zwischen der Analytik molekularer Eigenschaften und der Bauteilanalytik zu schließen, indem die exzitonische Chiralität eines helikalen PBI-Dimers nachgewiesen wurde. Die Chiralität dieses Perylenmotivs konnte auf molekularer Ebene weiter verstärkt werden, indem das π-Gerüst sowohl erweitert als auch stärker verdrillt wurde, um wünschenswert starke chiroptische Eigenschaften im NIR-Bereich zu erzielen und so eine neue Molekülfamilie kernverdrillter QBIs zu definieren. Diese Errungenschaften konnten durch die Ausweitung dieses molekularen Konzepts auf eine supramolekulare Ebene noch erheblich weiterentwickelt werden. Die geometrisch anspruchsvolle supramolekulare Anordnung, die für die effiziente exzitonische Kopplung erforderlich ist, wurde sorgfältig in das molekulare Design kodiert. Dementsprechend stellt das präsentierte QBI in seiner vierfach versetzt gestapelten Superhelix das erste Rylenbisimid-J-Aggregat dar, welches eine starke exzitonische Chiralität zeigt. Somit hat die Arbeit hat die gegenseitige Bestätigung von experimentellen und theoretischen Daten von der molekularen bis hin zur supramolekularen Ebene herausgestellt und gezeigt, dass für Rylenbisimid-Farbstoffe der exzitonische Beitrag zu den chiroptischen Eigenschaften konzipiert, synthetisch realisiert und quantenmechanisch verstanden werden kann. Dies kann den Weg für neue organische Funktionsmaterialien ebnen, die für chirale Sensoren oder Licht emittierende Bauteile verwendet werden können. KW - Molekül KW - Chiralität KW - Exziton KW - Organische Solarzelle KW - Supramolekulare Chemie KW - organic solar cell KW - non-fullerene acceptor KW - perylene bisimide KW - quaterrylene bisimide KW - inherent chirality KW - excitonic chirality KW - supramolecular chemistry KW - self-assembly KW - near infrared chirality Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-346106 ER - TY - THES A1 - Wagenhäuser [geb. Vonhausen], Yvonne T1 - Thermodynamic Investigations on the Dimerization and Anti-Cooperative Self-Assembly of Dipolar Merocyanines T1 - Thermodynamische Untersuchungen zur Dimerisierung und anti-kooperativen Selbstassemblierung von dipolaren Merocyaninen N2 - Dipolar merocyanines are very attractive supramolecular building blocks, as they combine interesting functional properties with strong, directional intermolecular interactions. The pyridine dioxocyano-pyridine (PYOP) chromophore (Chapter 2.2), used in this thesis, stands out because of its exceptionally high ground state dipole moment (g ~ 17 D), in combination with the option to retain good solubility also in unpolar solvents, by decoration with solubilizing groups. The reliable binding motif of anti-parallel -stacking due to dipole-dipole interactions has allowed the design of molecular building blocks that form assemblies of predictable geometry. The intense unstructured charge transfer UV/Vis absorption band (eg ~ 10.7 D) is a result of the dominant contribution of the zwitterionic resonance structure which brings the PYOP chromophore just beyond the cyanine limit in solvents of low polarity (c2 = 0.60, 1,4 dioxane). The high sensitivity of the S0 – S1 UV/Vis absorption band to the environment manifests itself in a pronounced negative solvatochromism and strong H-type exciton coupling within -stacked PYOP assemblies. In accordance with the classical molecular exciton theory, an increasing hypsochromic shift of the dominant absorption band of these H aggregates can be observed as the stack size increases up to about six chromophores, where it levels out at about max ~ 440 nm (CHCl3). This allows a uniquely simple estimation of the number of interacting chromophores within the self-assembled structure from a single UV/Vis absorption spectrum of an aggregate. The defined and well investigated PYOP dimer formation was employed in this thesis to probe the applicability and limitations of concentration-, temperature-, and solvent-dependent self-assembly studies (Chapter 3). Straightforward theoretical models to evaluate datasets of concentration-, temperature-, and solvent-dependent UV/Vis absorption by nonlinear regression analysis were derived for the case of dimer formation (Chapter 2.1). Although the dimer model is well known and widely applied in literature, this detailed derivation is helpful to understand assumptions and potential problems of the different approaches for the determination of thermodynamic parameters. This helps to decide on the most appropriate method to analyse a system of interest. In this regard it should be noted that covering a large portion of the self-assembly process with the experimental data is a prerequisite for the accuracy of the analysis. Additionally, many of the insights can also be transferred to other self-assembly systems like supramolecular polymerization or host-guest interactions. The concentration-dependent analysis is the most straightforward method to investigate self-assembly equilibria. No additional assumptions, besides mass balance and mass action law, are required. Since it includes the least number of parameters (only K, if M/D are known), it is the most, or even only, reliable method, to elucidate the self-assembly mechanism of an unknown system by model comparison. To cover a large concentration range, however, the compound must be soluble enough and generally sample amounts at least in the low mg scale must be available. The temperature-dependent analysis has the advantage that all thermodynamic parameters G0, H0 and S0 can be obtained from a single sample in one automated measurement. However, the accessible temperature-range is experimentally often quite limited and dependent on the solvent. For systems which do not show the transition from monomer to aggregate in a narrow temperature range, as given for, e.g., cooperative aggregation or processes with a high entropy contribution, often not the entire self-assembly process can be monitored. Furthermore, the assumptions of temperature-independent extinction coefficients of the individual species as well as temperature-independent H0 and S0 must be met. Monte Carlo simulations of data sets demonstrated that even minor changes in experimental data can significantly impact the optimized values for H0 and S0. This is due to the redundancy of these two parameters within the model framework and even small thermochromic effects can significantly influence the results. The G0 value, calculated from H0 and S0, is, however, still rather reliable. Solvent-dependent studies can often cover the entire self-assembly process from monomeric (agg = 0) to the fully aggregated state (agg = 1). However, for dyes with strong solvatochromic effects, such as the dipolar merocyanines investigated in this thesis, the results are affected. Also, the assumption of a linear relation of the binding energy G0 and the fraction of denaturating solvent f, which is based on linear free energy relationships between G0 and the solvent polarity, can lead to errors. Especially when specific solvent effects are involved. For the evaluation of experimental data by nonlinear regression, general data analysis software can be used, where user-defined fit models and known parameters can be implemented as desired. Alternatively, multiple specialized programs for analysing self-assembly data are available online. While the latter programs are usually more user-friendly, they have the disadvantage of being a “black box” where only pre-implemented models can be used without the option for the user to adapt models or parameters for a specific system. In Chapter 3 comprehensive UV/Vis absorption datasets are presented for the dimerization of merocyanine derivative 1 in 1,4-dioxane, which allowed for the first time a direct comparison of the results derived from concentration-, temperature-, and solvent-dependent self-assembly studies. The results for the binding constant K and corresponding G0 from the concentration- and temperature-dependent analysis were in very good agreement, also in comparison to the results from ITC. For the temperature-dependent analysis, though, multiple datasets of samples with different concentration had to be evaluated simultaneously to cover a meaningful part of the self-assembly process. Furthermore, a significant dependence of the optimized parameters H0 and S0 on the wavelength chosen for the analysis was observed. This can be rationalized by the small thermochromic shifts of both the monomer and the dimer UV/Vis absorption band. The results from the solvent-dependent evaluation showed the largest deviation, as expected for the highly solvatochromic merocyanine dye. However, even here by evaluation at 491 and 549 nm the deviation for G0 was only 2.5 kJ mol1 (9%) with respect to the results from the concentration-dependent analysis (G0 = 29.1 kJ mol1). Thus, despite the strong solvatochromism of the dipolar chromophore, it can still be considered a reliable method for estimating the binding strength. Furthermore, multiple repetitions of the concentration-, temperature-, and solvent-dependent studies provided insight into the reproducibility of the results and possible sources of experimental errors. In all cases, the deviations of the results were small (G0 < 0.4 kJ mol1) and within the same range as the fit error from the nonlinear regression analysis. The insights from these studies were an important basis for the in-depth investigation of a more complex supramolecular system in Chapter 4, as a single method is often not enough to capture the full picture of a more complicated self-assembly process. To elucidate the anti-cooperative self-assembly of the chiral merocyanine 2, a combination of multiple techniques had to be applied. Solvent-dependent UV/Vis absorption studies in CH2Cl2/MCH mixtures showed the step-wise assembly of the merocyanine monomer (max(M) = 549 nm, CH2Cl2) to first a dimer (max(D) = 498 nm, CH2Cl2/MCH 15:85) by dipole-dipole interactions, and then a -stacked higher aggregate (max(H) = 477 nm, MCH), with pronounced H-type coupling. The thermodynamic evaluation of this data, however, suffered from the severe solvatochromism, especially of the monomeric species (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Therefore, concentration-dependent studies were performed at three different temperatures (298, 323, 353 K) to elucidate the self-assembly mechanism and determine reliable thermodynamic parameters. The studies at elevated temperatures were hereby necessary, to obtain experimental data over a larger agg--range. Due to the pronounced difference in the thermodynamic driving force for dimerization and higher aggregate formation (KD/K5 = 6500) a concentration range exists in MCH where almost exclusively the dimer species of 2 is present, before further self-assembly by dispersion interactions occurs. Therefore, the data could be evaluated independently for the two self-assembly steps. The self-assembly of dimers into the higher aggregate could not be described by the isodesmic model but was fitted satisfactorily to a pentamer model. This rather small size of about ten -stacked PYOP chromophores was, furthermore, consistently indicated by AFM, VPO and DOSY NMR measurements. Based on 1D and 2D NMR data as well as the strong bisignate CD signal of the higher aggregate in combination with TD-DFT calculations, a P-helical stack is proposed as its structure. The small size can be rationalized by the anti-cooperative self-assembly mechanism and the sterical demand of the solubilizing trialkoxyphenyl and the chiral tetralin substituents. Additionally, the aliphatic shell formed by the solubilizing chains around the polar chromophore stack, can account for the exceptionally high solubility of 2 in MCH (> 15 mg mL1). These combined studies of the self-assembly process enabled the identification of suitable conditions for the investigation of fluorescence properties of the individual aggregate species. Aggregation-induced emission enhancement was observed for the almost non-emissive monomer (Fl(M) = 0.23%), which can be rationalized by the increasing rigidification within the dimer (Fl(D) = 2.3%) and the higher aggregate (Fl(H) = 4.5%). The helical chirality of the PYOP decamer stack, furthermore, gave rise to a strong CPL signal with a large glum value of 0.011. The important conclusion of this thesis is that the temperature- and solvent-dependent analyses are valid alternatives to the classical concentration-dependent analysis to determine thermodynamic parameters of self-assembly equilibria. Although, for a specific supramolecular system, one approach might be favourable over the others for a variety of reasons. The experimental limitations often demand a combination of techniques to fully elucidate a self-assembly process and to gain insights in the aggregate structure. The anti-cooperative merocyanine self-assembly, which was described here for the first time for the PYOP merocyanine 2, is no exception. Besides the interest in the merocyanine assemblies from a structural and functional point of view, the insights gained from the presented studies can also be transferred to other self-assembly systems and be a guide to find the most appropriate analysis technique. N2 - Dipolare Merocyanine sind sehr attraktive supramolekulare Bausteine, da sie interessante funktionale Eigenschaften mit starken, gerichteten zwischenmolekularen Wechselwirkungen vereinen. Der Pyridin-dioxocyano-pyridin (PYOP)-Chromophor (Kapitel 2.2), welcher in dieser Arbeit verwendet wurde, zeichnet sich durch sein besonders starkes Grundzustands-dipolmoment (g ~ 17 D) aus, in Kombination mit der Möglichkeit durch Funktionalisierung mit löslichkeitsvermittelnden Gruppen dennoch gute Löslichkeit zu bewahren. Das zuverlässige Bindungsmotiv der durch Dipol-Dipol Wechselwirkungen anti-parallel  gestapelten Merocyanine ermöglicht es, gezielt molekulare Bausteine zu entwerfen, welche sich zu Strukturen von vorhersagbarer Geometrie zusammenlagern. Der dominante Beitrag der zwitterionischen Resonanzstruktur führt zu einer intensiven, unstrukturierten Charge-Transfer UV/Vis-Absorptionsbande (eg ~ 10.7 D) und bringt den PYOP Chromophor leicht jenseits des Cyanin-Limits in unpolaren Lösungsmitteln (c2 = 0.60, 1,4-Dioxan). Die Sensitivität der S0 S1 UV/Vis-Absorptionsbande gegenüber der Umgebung zeigt sich in der ausgeprägten negativen Solvatochromie und einer starken H artigen excitonischen Kopplung in -gestapelten Aggregaten. In Übereinstimmung mit klassischer Excitonen-Theorie kann eine zunehmende hypsochrome Verschiebung der dominanten Absorptionsbande mit zunehmender Größe der H-Aggregate beobachtet werden, bis bei etwa sechs Chromophoren und max ~ 440 nm ein Plateau erreicht wird. Dies ermöglicht eine einmalig einfache Abschätzung, der Anzahl an wechselwirkenden Chromophoren innerhalb einer Aggregatstruktur, basierend auf einem einzigen UV/Vis-Absorptionsspektrum. Das definierte und gut untersuchte Beispiel des PYOP-Dimers wurde in dieser Arbeit verwendet, um die Anwendbarkeit und die Grenzen von konzentrations-, temperatur- und lösungsmittelabhängigen Aggregationsstudien auszutesten (Kapitel 3). Theoretische Modelle zur thermodynamischen Auswertung von konzentrations-, temperatur- und lösungsmittelabhängigen Studien mittels nichtlinearer Regression wurden für das Beispiel der Dimerisierung hergeleitet (Kapitel 2). Obwohl das Dimer-Modell literaturbekannt ist, ist diese detaillierte Herleitung hilfreich, um die Annahmen zu verstehen, die dem Modell zugrunde liegen. So können potenzielle Problemquellen der verschiedenen Methoden erkannt und die geeignetste Methode zur Bestimmung der thermodynamischen Parameter für ein bestimmtes System ausgewählt werden. Hierbei sollte man beachten, dass es sich für die Aussagekraft der Analyse klar als zuträglich erwiesen hat, wenn ein möglichst großer Bereich des Aggregationssprozesses von den experimentellen Daten abgedeckt werden kann. Viele der hier gewonnen Erkenntnisse lassen sich auch auf andere Systeme wie supramolekulare Polymere oder Wirt-Gast-Komplexe übertragen. Die konzentrationsabhängige Analyse ist die direkteste Methode, um ein supramolekulares Gleichgewicht zu untersuchen. Sie erfordert keine zusätzlichen Annahmen, außer dem Massenerhalt und dem Massenwirkungsgesetz. Da das konzentrationsabhängige mathematische Modell die wenigsten Parameter enthält (nur K, wenn M/D bekannt), ist es die zuverlässigste, wenn nicht sogar die einzig zuverlässige, Methode, um den Aggregationsmechanismus durch einen Vergleich der experimentellen Daten mit verschiedenen Modellen aufzuklären. Allerdings muss die zu untersuchende Verbindung hierbei löslich genug sein, damit ein großer Teil des Aggregationsprozesses in den Studien abgebildet werden kann und es werden üblicherweise Substanzmengen im niedrigen mg Bereich benötig. Die temperaturabhängige Analyse hat den Vorteil, dass alle thermodynamischen Parameter G0, H0 und S0 in einer einzigen automatisierten Messung einer einzelnen Probe erhalten werden können. Allerdings ist der experimentell zugängliche Temperaturbereich oft sehr eingeschränkt und abhängig von dem verwendeten Lösungsmittel. Für Systeme, bei denen der Übergang vom Monomer zum Aggregat nicht in einem engen Temperaturbereich erfolgt, z.B. aufgrund von Kooperativität oder einem großen Entropie-Beitrag, ist es oft nicht möglich den gesamten Aggreationsprozess abzubilden. Zusätzlich sollten die Annahmen, dass sowohl die Extinktionskoeffizienten der einzelnen Spezies sowie H0 und S0 temperaturunabhängig sind, zutreffen. Mittels Monte Carlo Simulationen konnte gezeigt werden, dass selbst kleine Änderungen in den experimentellen Daten die erhaltenen Werte von H0 und S0 deutlich beeinflussen können. Dies liegt daran, dass die beiden Parameter im mathematischen Modell nicht völlig unabhängig voneinander sind. Selbst geringfügige thermochrome Veränderungen können daher die Ergebnisse für H0 und S0 beeinflussen. Die G0-Werte, die sich aus H0 und S0 berechnen lassen, sind allerding dennoch recht zuverlässig. Mittels lösungsmittelabhängiger Studien ist es oft am einfachsten, den vollständigen Prozess vom Monomer (agg = 0) bis zum Aggregat (agg = 1) abzubilden. Für stark solvatochrome Farbstoffe wie die hier untersuchten dipolaren Merocyanine werden die Ergebnisse allerdings deutlich verfälscht. Auch die Annahme einer linearen Abhängigkeit der Bindungsenergie G0 und der Lösungsmittelzusammensetzung f, die auf linearen Freie-Energie Beziehungen zwischen G0 und der Lösungsmittelpolarität beruhen, kann zu Abweichungen führen, vor allem, wenn spezifische Lösungsmitteleffekte involviert sind. Die Auswertung der experimentellen Daten erfolgt mittels nichtlinearer Regression. Hierfür können diverse Datenauswertungsprogramme genutzt werden, in die sich benutzerdefinierte Modelle inklusive bekannter Parameter implementieren lassen. Alternativ gibt es auch eine Auswahl von spezialisierten Programmen zur Auswertung von Aggregationsdaten im Internet. Diese sind zwar deutlich benutzerfreundlicher, aber auch „Black Boxes“, deren voreingestellte Modelle und Parameter in der Regel nicht vom Nutzer für ein spezielles System angepasst werden können. In Kapitel 3 wurden umfangreiche UV/Vis-Absorptionsstudien für die Dimerisierung von Merocyanin 1 in 1,4-Dioxan vorgestellt, welche zum ersten Mal einen direkten Vergleich zwischen den Ergebnissen von konzentrations-, temperatur- und lösungsmittelabhängigen Aggregationsstudien ermöglichten. Die Ergebnisse für die Bindungskonstante K und dem dazugehörigen G0-Wert aus der konzentrations- und temperaturabhängigen Analyse stimmen mit den Ergebnissen der isothermalen Titrationskalorimetrie (ITC) überein. Bei der temperaturabhängigen Auswertung mussten allerdings mehrere Datensätze von Proben mit unterschiedlichen Konzentrationen zusammen ausgewertet werden, um einen aussagekräftigen Bereich des Aggregationsprozesses abzudecken. Außerdem wurde eine deutliche Abhängigkeit der Ergebnisse für H0 und S0 von der Wellenlänge festgestellt, die für die Auswertung gewählt wurde. Dies liegt an der kleinen thermochromen Verschiebung der Monomer- und Dimer-Absorptionsbande. Die Ergebnisse der lösungsmittelabhängigen Studien zeigten, wie für den stark solvatochromen Chromophor erwartet, die größte Abweichung. Allerdings beträgt die Abweichung für G0 selbst hier nur 2.5 kJ mol1 (9%), bei Auswertung bei 491 und 549 nm, im Vergleich zur konzentrationsabhängigen Auswertung (G0 = 29.1 kJ mol1). Trotz der ausgeprägten Solvatochromie sind die lösungsmittelabhängigen Studien also geeignet, um die Bindungsstärke eines Systems abzuschätzen. Mehrmalige Wiederholung der Experimente erlaubte eine Abschätzung der Reproduzierbarkeit der Ergebnisse und möglicher Fehlerquellen. Die Ergebnisse schwankten hierbei in allen Fällen nur geringfügig (G0 < 0.4 kJ mol1) und in der gleichen Größenordnung wie der Fehler der nichtlinearen Regression. Die Erkenntnisse aus diesen Studien waren eine wichtige Grundlage für die Untersuchung eines komplexeren supramolekularen Systems in Kapitel 4. Eine einzelne Methode ist oft nicht ausreichend, um einen mehrstufigen Aggregationsprozess vollständig aufzuklären, und auch zur Aufklärung der anti-kooperativen Aggregation des chiralen Merocyanins 2, wurde eine Kombination verschiedener Techniken angewandt. Lösungsmittelabhängige UV/Vis-Absorptionsstudien in CH2Cl2/MCH Mischungen zeigten die stufenweise Zusammenlagerung der Merocyanin-Monomere (max(M) = 549 nm, CH2Cl2) zuerst durch Dipol-Dipol Wechselwirkungen zu Dimeren (max(D) = 498 nm, CH2Cl2/MCH 15:85) und dann zu größeren -Stapeln (max(H) = 477 nm, MCH) mit ausgeprägter H-Kopplung. Die thermodynamische Auswertung dieser Daten leidet allerdings unter der ausgeprägten Solvatochromie, vor allem der Monomer-Spezies (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Daher wurden stattdessen konzentrationsabhängige Studien bei verschiedenen Temperaturen durchgeführt, um den Aggregationsmechanismus aufzuklären und verlässliche thermodynamische Parameter zu bestimmen. Die Studien bei höheren Temperaturen waren notwendig, um mit den experimentellen Daten einen größeren agg--Bereich abdecken zu können. Aufgrund des ausgeprägten Unterschieds in der thermodynamischen Triebkraft für die Dimerisierung und die Bildung höherer Aggregate (KD/K5 = 6500) gibt es in MCH einen Konzentrationsbereich, in dem fast ausschließlich die dimere Spezies vorhanden ist, bevor eine weitere Zusammenlagerung durch Dispersionswechselwirkungen erfolgt. Dies ermöglichte eine unabhängige Auswertung der Daten für die beiden Aggregationsschritte. Der Zusammenschluss von Dimeren zum höheren Aggregat ließ sich nicht durch das isodesmische Modell beschreiben, sondern durch ein Pentamer-Modell. Diese Größe von etwa zehn -gestapelten PYOP-Chromophoren wurde außerdem durch AFM-, VPO- und DOSY-NMR-Messungen bestätigt. Basierend auf 1D- und 2D-NMR-Daten und dem CD-Signal des höheren Aggregats mit positivem Cotton-Effekt in Kombination mit TD-DFT Rechnungen, wurde ein P-helikaler -Stapel als Struktur angenommen. Die geringe Größe lässt sich durch den anti-kooperativen Aggregationsmechanismus und den sterischen Anspruch der lösungsvermittelnden Trialkoxyphenyl- und der chiralen Tetralin-Substituenten erklären. Die durch diese Substituenten ausgebildete aliphatische Hülle um den polaren Chromophorstapel kann außerdem die ungewöhnlich hohe Löslichkeit der Verbindung 2 in MCH erklären (> 15 mg mL1). Die detaillierte Untersuchung des Selbstorganisationsprozesses ermöglichte die Identifizierung geeigneter Bedingungen für die Untersuchung der Fluoreszenzeigenschaften der einzelnen Aggregatspezies. Für das nahezu nicht emittierende Monomer (Fl(M) = 0.23%) wurde durch zunehmende Rigidisierung im Dimer (Fl(D) = 2.3%) und im höherem Aggregat (Fl(H) = 4.5%) eine durch Aggregation induzierte Emissionssteigerung beobachtet. Die helikale Chiralität des PYOP-Decamer-Stapels führte außerdem zu einem starken CPL Signal mit einem hohen glum-Wert von 0.011. Das wichtige Fazit dieser Arbeit ist, dass sowohl temperatur- als auch lösungsmittelabhängige Studien valide Alternativen zu den klassischen konzentrationsabhängigen Untersuchungen sind, mit denen thermodynamische Parameter von Selbstorganisations-Gleichgewichten bestimmt werden können. Wobei für ein bestimmtes supramolekulares System eine der Methoden aus verschiedenen Gründen vorteilhafter sein kann als die anderen. Üblicherweise gegebene experimentelle Beschränkungen erfordern oft den kombinierten Einsatz von Techniken, um einen Selbstorganisationsprozess und die Aggregatstrukturen vollständig aufzuklären. Die anti-kooperative Merocyanin-Selbstorganisation, die hier zum ersten Mal für das PYOP-Merocyanin 2 beschrieben wurde, ist keine Ausnahme. Neben dem Interesse an den Merocyanin-Aggregaten aus struktureller und funktioneller Sicht können die aus den vorgestellten Studien gewonnenen Erkenntnisse auch auf andere Selbstassemblierungs-systeme übertragen werden und als Leitfaden für die Suche nach der am besten geeigneten Analysemethode dienen. KW - Merocyanine KW - Supramolekulare Chemie KW - Self-Assembly Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-352111 ER - TY - THES A1 - Geiger, Lars T1 - The versatile use of Guanidiniocarbonylpyrroles : from self-assembly to peptide recognition T1 - Der vielseitige Einsatz von Guanidiniocarbonylpyrrolen: Von der Selbstassoziation bis zur Peptide-Erkennung N2 - Die vorliegende Arbeit gliedert sich in zwei Themenschwerpunkte. Ein supramolekulares Projekt beinhaltete die Entwicklung von neuen flexiblen, selbst-aggregierenden Zwitterionen als Bausteine für supramolekulare Polymere. In einem zweiten bioorganischem Teil bestand das Ziel darin, Rezeptoren für Aminosäuren und Dipeptide in Wasser zu entwickeln. Beide Projekte basieren auf dem Guanidiniocarbonylpyrrol als effizientes Bindungsmotiv für die Komplexierung von Carboxylaten in wässrigen Lösungen. Eine notwendige Voraussetzung für die Realisierung dieser Projekte war jedoch zunächst die Entwicklung einer allgemeinen, effizienten und milden Synthese für Guanidiniocarbonylpyrrole. Die bei der zuvor verwendeten Methode aggressiven Reaktionsbedingungen und die problematische Aufreinigung verhinderten eine größere Anwendung dieses Bindungsmotivs in bioorganischen und supramolekularen Projekten. Im Rahmen dieser Arbeit gelang es mir erfolgreich eine neue Syntheseroute zu entwickeln. Hierbei wurde mono-tBoc-Guanidine mit dem Benzylester mittels PyBOP gekuppelt und nach Entschützung der Benzylschutzgruppe wurde die zentrale Zwischenstufe für die weiteren Synthesen, die tBoc-geschützte Guanidinocarbonylpyrrol-Säure erhalten. Durch diese neuartige Synthese war es möglich, eine Reihe von flexiblen Zwitterionen 3-6 herzustellen und deren Selbst-Aggregation und den Einfluß der Kettenlänge und somit Flexibilität der Alkylkette auf Struktur und Stabilität der gebildeten Aggregate in Lösung sowie auch in der Gasphase zu untersuchen. In DMSO deuten NMR-Verdünnungsreihen darauf hin, dass die flexiblen Zwitterionen mit n = 1, 3 und 5 oligomere Strukturen ausbilden. Im Falle von n = 1 werden hoch stabile helicale und Nanometer große Aggregate in der gebildet. In den Gasphasen-Studien wurde die Stabilität und Zerfallskinetik einer Reihe von Natriumaddukten der Dimere von n = 2, 3 und 5 untersucht. Dieses gelang durch die Methode der „infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry“ (IRMPD-FT-ICR MS). Solche Studien ermöglichen möglicherweise in Zukunft das gezielte Design von supramolekularen Bausteinen. Der bioorganische Teil meiner Arbeit setzte sich aus drei Einzelprojekten zusammen. So synthetisierte ich durch eine fünfstufige Synthesesequenz vier neue Arginin-Analoga, die in Zukunft als Ersatz für Arginin in Peptide eingebaut werden können. Als Testreaktion für die Eignung dieser Verbindungen in einer Festphasenpeptidsynthese, wurde ein Tripetid Ala-AA1-Val (AA: Arginin-Analogon) mit einem eingebauten Arginin-Analogon erfolgreich hergestellt. In einem zweiten Projekt habe ich den Einfluß einer zusätzlichen ionischen Wechselwirkung in unserem Bindungsmotiv untersucht. Dazu wurde ein zweifach-kationischer Rezeptor und der dreifach-geladenen Rezeptor synthetisiert und physikalisch-organisch ihre Bindungseigenschaften mit Hilfe von NMR-Titrationsexperimenten gegen eine Reihe von Aminosäuren untersucht. Der dreifach-kationische Rezeptor 11 zeigte hierbei herausragende Bindungseigenschaften und war um ca. den Faktor 100 besser als für die bisher bekannten Guanidiniocarbonylpyrrole. Die Assoziationskonstanten waren auch fast reinem Wasser mit bis zu Kass = 2000 noch bemerkenswert hoch. Im dritten Projekt habe ich einen de-novo entwickelten Rezeptor für C-terminale Dipeptide in einer beta-Faltblatt Struktur entwickelt.Dieser Rezeptor wurde mittels NMR and UV-Titrationen untersucht. In 40 % Wasser/ 60 % DMSO waren die Bindungskonstanten zu hoch um überhaupt quantifiziert zu werden. Deshalb wurden die Bindungseigenschaften des Rezeptors mittels UV Titrationen in einer Mischung aus 90 % Wasser mit 10 % DMSO gegen eine Reihe von Dipeptiden und Aminosäuren getestet. Die Bindungsdaten zeigen, dass Rezeptor Dipeptide mit ausgezeichneten Bindungskonstanten (Kass > 10000 M-1) komplexiert. Im Gegensatz dazu bindet der Rezeptor 12 Aminosäuren um den Faktor zehn schlechter (Kass > 1000 M-1). Die Komplexstabilität nimmt hierbei in Abhängigkeit von der Seitenkette des Dipeptids in der Reihe Gly < Ala < Val zu, was sich mit der abnehmenden Flexibilität und zunehmenden Hydrophobizität der Seitenkette erklären lässt. Diese Eigenschaften machen den Rezeptor 12 zu dem besten bisher bekannten Dipeptidrezeptor in wässrigen Lösungen. Innerhalb meiner Arbeit gelang es mir somit, nicht nur eine essentiell wichtige, milde und effiziente Synthese für Guanidinocarbonylpyrrole zu entwickeln, sondern es gelang mir ebenso ein neues Bindungsmotiv für die Komplexierung von Aminosäuren in Wasser zu entwickeln. Zusätzlich konnte noch der Dipeptidrezeptor erfolgreich synthetisiert und untersucht werden. Mit Bindungskonstanten für von Kass > 10000 M-1 ist er der derzeit beste Dipeptidrezeptor in wässriger Lösung. N2 - The present thesis encompasses two parts. The first supramolecular part focuses on the development of new flexible self-assembling zwitterions as building blocks for supramolecular polymers. In the second part, the aim was to develop bioorganic receptors for amino acids and dipeptides in aqueous media. Both research projects are based on the guanidiniocarbonyl pyrrole 1 as a new efficient binding motif for the complexation of carboxylates in polar solution.A necessary requirement for the realization of these research projects was to develop an efficient and mild synthetic approach for the cationic guanidiniocarbonyl pyrroles in general. The harsh reaction conditions of the previously used method and the problematic purification of the cationic guanidinocarbonyl pyrroles so far prevented a more extensive exploration in bioorganic and supramolecular research. In the course of this work I successfully developed a new synthesis starting with mono tBoc-protected guanidine that was coupled with a benzyl protected pyrrole carboxylic acid. After deprotection of the benzyl group, a key intermediate in the newly developed synthesis, the tBoc-protected guanidinocarbonyl pyrrole acid, was obtained. This new, mild and extremely efficient synthetic approach for the introduction of acyl guanidines is now the standard procedure in our group for the preparation of both solution and solid-phase guanidiniocarbonyl pyrroles. With this facile method at hand, a new class of flexible zwitterions, in which a carboxylate is linked via an alkyl chain to a guanidiniocarbonyl pyrrole cation was synthesized. The self-aggregation and the influence of the length and therefore flexibility of the alkyl spacer on the structure and stability of the formed aggregates were studied in solution and gas phase. In solution the aggregation was studied by NMR-dilution experiments in DMSO which suggest that flexible zwitterions with n = 1, 3 and 5 form oligomers. For n = 1, highly stable helical aggregates with nanometer size are formed. In the gas phase studies the stability and the fragmentation kinetics of a series of sodiated dimeric zwitterions with n = 2, 3 and 5 were investigated. This was done by infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry (IRMPD-FT-ICR-MS). These kinds of studies can be used in the future for a more directed design of supramolecular building blocks The bioorganic research part comprises three different projects. In a first project I synthesized four new arginine analogues which can be implemented in peptides as a substitute for arginine. Therefore, I developed the new multi-step synthesis shown below for these arginine analogues. As a test for their application in normal solid phase synthesis, I successfully prepared a tripeptide sequence Ala-AA1-Val (AA: arginine analogue. In a second project I studied the influence of additional ionic interactions within our binding motif. I synthesized a di-cationic and a tris-cationic receptor and evaluated the binding properties via NMR titration experiments against a variety of amino acids. Especially, the tris-cationic receptor was capable to strongly complex amino acids. The association constants were about a factor of 100 higher than those for the guanidiniocarbonyl pyrroles known so far. Even in 90 %water/10 % DMSO the association constants determined by NMR titration were extremely high with values around Kass = 2000 M-1. In the third project I developed a de-novo designed receptor for C-terminal dipeptides in a beta-sheet conformation based on molecular calculations. This receptor was studied in NMR and also UV titration experiments. In 40 % water/ 60 % DMSO the association constants were too strong to be measured by NMR titration experiments. Therefore, the complexation properties of 12 were studied by UV titration in water (with 10 % DMSO added for solubility reasons) with various dipeptides and amino acids as substrates. The data show that 12 binds dipeptides very efficiently even in water with association constants Kass > 10000 M-1, making 12 one of the most effective dipeptide receptors known so far. In contrast to that, simple amino acids are bound up to ten times less efficiently (Kass > 1000 M-1) than dipeptides. In the series of dipeptides studied the complex stability increases depending on the side chains present in the order Gly < Ala < Val which is a result of the decreasing flexibility of the peptide and the increasing hydrophobicity of the side chains. The binding properties of this receptor are superior to any other dipeptide receptor reported so far. Within my thesis I have not only developed an essential, mild and efficient synthetic approach for guanidiniocarbonyl pyrroles in general, but also a new binding motif for the complexation of amino acids 15, 11 and in addition a dipeptide receptor 12 that is superior to all dipeptides receptors known so far. KW - Guanidinderivate KW - Supramolekulare Chemie KW - Selbstassoziation KW - Bioorganik KW - supramolekulare Chemie KW - molekulare Erkennung KW - Self-Assembly KW - Bioorganic chemistry KW - supramolecular chemistry KW - molecular recognition Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9272 ER - TY - THES A1 - Schreck, Maximilian T1 - Synthesis and Photophysics of Linear and Star-Shaped Oligomers of Squaraine Dyes T1 - Synthese und Photophysik von Linearen und Sternförmigen Squarain-Oligomeren N2 - In this thesis, the synthesis and photophysics of a great variety of squaraine dyes are presented. This variety is based on four parent squaraines containing either indolenine or quinoline heterocycles. By a suitable choice of the donor and acceptor unit, the optical properties can already be adapted to the properties desired on the stage of the monomer. To promote a further derivatisation of these dyes, diverse functional groups are attached to the monomers using transition metal-catalysed C-C coupling reactions. However, this has to be preceded by the synthesis of bromine-functionalised derivatives as a direct halogenation of squaraine dyes is not feasible. Therefore, the halogen function is already introduced in precursor molecules giving rise to a molecular building block system containing bromine-, boronic ester-, and alkyne-functionalised monomer units, which pave the way to a plethora of squaraine oligomers and polymers. The indolenine homopolymer pSQB-1 as well as the corresponding small molecular weight oligomers dSQB-1 and tSQB were synthesized applying Ni-mediated Yamamoto and Pd-catalysed Suzuki coupling methodologies, respectively. The motivation for this project relied on the fundamental investigations by Völker et al. on pSQB-V. A progressive red-shift of the lowest energy absorption maximum from the dimer to the polymer was observed in CHCl3 compared to the monomer. With increasing number of monomer units, the exciton coupling decreases from the dimer to the polymer. In addition, the shape of the absorption band manifold shows a strong dependence on the solvent, which was also observed by Völker et al. J-type aggregate behavior is found in chlorinated solvents such as CHCl3 and DCM, whereas H-type aggregates are formed in acetone. Temperature-dependent absorption studies in PhCN reveals a reversible equilibrium of diverse polymer conformers, which manifests itself in a gradual change from H-aggregate behavior to a mixture with a more pronounced J-aggregate behavior upon raising the temperature. It isassumed that both characteristic aggregate bands correlate in borderline cases with two polymer structures which can be assigned to a zig-zag and a helical structure. As no experimental evidence for these structures could hitherto be provided by NMR, TD-DFT computations on oligomers (22-mers) can reproduce very closely the characteristic features of the spectra for the two conformational isomers. The subsequent chapters are motivated by the goal to influence the optical properties through a control of the superstructure and thus of the intramolecular aggregate formation. On the one hand, bulky groups are implemented in the 3-position of the indolenine scaffold to provoke steric repulsion and thus favoring J-aggregate behavior at the expense of helical arrangements. The resulting homopolymer pDiPhSQB bearing two phenyl groups per indolenine exhibits J-type aggregate behavior with red-shifted absorption maxima in all considered solvents which is explained to be caused by the formation of elongated zig-zag structures. Furthermore, single-crystal X-ray analysis of monomer DiPhSQB-2-Br2 reveals a torsion of the indolenine moieties as a consequence of steric congestion. The twist of the molecular geometry and the resulting loss of planarity leads to a serious deterioration of the fluorescence properties, however a significant bathochromic shift of ca. 1 200 cm-1 of the lowest absorption band was observed compared to parent SQB, which is even larger than the shift for dSQB-1 (ca. 1 000 cm-1). On the other hand, a partial stiffening of the polymer backbone is attempted to create a bias for elongated polymer chains. In this respect, the synthetic approach is to replace every second biarylaxis with the rigid transoid benzodipyrrolenine unit. Despite a rather low average degree of polymerization < 10, exclusively red-shifted absorption maxima are observed in all solvents used. In order to complete the picture of intramolecular aggregates through the selective design of H-aggregates, a squaraine-squaraine copolymer was synthesised containing the classic cisoid indolenine as well as the cisoid quinoline building block. Taking advantage of the highly structure directing self-assembly character of the quinoline moiety, the copolymer pSQBC indeed showes a broad, blue-shifted main absorption band in comparison with the monomer unit dSQBC. The shape of the absorption band manifold solely exhibited a minor solvent and temperature dependence indicating a persistent H-aggregate behaviour. Hence, as a proof of concept, it is shown that the optical properties of the polymers (H- and J-aggregate) and the corresponding superstructure can be inherently controlled by an adequate design of monomer precursors. The last chapter of this work deals, in contrast to all other chapters, with intermolecular aggregates. It is shown that the two star-shaped hexasquarainyl benzenes hSQA-1 and hSQA-2 exhibit a strong propensity for self-organisation. Concentration- and temperature-dependent studies reveal a great driving force for self-assembly in acetone. While the larger hSQA-2 instantaneously forms stable aggregates, the aggregates of hSQA-1 shows a pronounced kinetic stability. Taking advantage of the kinetic persistency of these aggregates, the corresponding kinetic activation parameters for aggregation and deaggregation can be assessed. The absorption spectra of both hexasquarainyl benzenes in the aggregated state reveal some striking differences. While hSQA-1 features an intensive, very narrow and blue-shifted absorption band, two red-shifted bands are observed for hSQA-2, which are closely located at the monomer absorption. The very small bandwidth of hSQA-1 are interpreted to be caused by exchange narrowing and pointed towards highly ordered supramolecular aggregates. The concentration-dependent data of the two hexasquarainyl benzenes can be fitted to the dimer-model with excellent correlation coefficients, yielding binding constants in excess of 10^6 M-1, respectively. Such high binding constants are very surprising, considering the unfavourable bulky 3,3-dimethyl groups of the indolenine units which should rather prevent aggregation. Joint theoretical and NMR spectroscopic methods were applied to unravel the supramolecular aggregate structure of hSQA-1, which is shown to consist of two stacked hexasquarainyl benzenes resembling the picture of two stacked bowls. N2 - Im Rahmen dieser Arbeit wird die Synthese sowie photophysikalischen Untersuchungen einer Vielzahl von Squarainfarbstoffen präsentiert. Diese Vielfalt erwuchs aus vier monomeren Stammverbindungen, die auf Indolenin- bzw. Chinolin-Heterozyklen gründeten. Um die Derivatisierung der Monomere weiter voranzutreiben, werden diese durch geeignete funktionelle Gruppen unter der Verwendung von übergangsmetallkatalysierten C-C Kupplungsreaktionen chemisch modifiziert. Dieser geht jedoch die Synthese Brom-funktionalisierter Vorstufen voraus. So muss die Halogenfunktion bereits in den Vorläufermolekülen eingeführt werden, da eine selektive, direkte Halogenierung auf der Stufe des Squarains nicht möglich ist. Schlussendlich kann somit ein molekularer Baukasten entwickelt werden, der, bestückt mit Monomerbausteinen mit Brom-, Borester-, und Alkinfunktionen, den Weg zu diversen oligomeren und polymeren Squarainfarbstoffen ebnete. Das Indolenin Squarain Homopolymer pSQB-1, als auch die entsprechenden niedermolekularen Oligomerverbindungen dSQB-1 und tSQB wurden mittels der Ni-unterstützten Yamamoto bzw. Pd-katalysierte Suzuki Kupplung dargestellt. Die bereits durch Völker et al. erfolgten spektroskopischen Untersuchungen an pSQB-V werden im Rahmen dieser Arbeit fortgesetzt. Im Vergleich zum Monomer, zeigen das Dimer, Trimer und das Polymer in CHCl3 eine progressive Rotverschiebung der niedrigsten, intensivsten Absorptionsbande. Mit steigender Anzahl der SQB-Monomereinheiten nimmt die Exzitonenkopplung im Dimer bis hin zum Polymer ab. Wie auch bereits Völker et al. zeigen konnten, ist die Form der Absorption des Exzitonenbandes von pSQB-1 stark lösemittelabhängig. Während J-Aggregat ähnliches Verhalten in CHCl3 und DCM beobachtet wird, zeigt das Polymer in Aceton H-Aggregat ähnliches Verhalten. Temperaturabhängige Absorptionsmessungen in PhCN zeigen ein reversibles thermodynamisches Gleichgewicht von verschiedenen Polymerstrukturen, welches sich mit steigender Temperatur durch einen sukzessiven Übergang von H-Aggregat zu einer Mischung mit mehr J-Aggregat Charakter manifestiert. Es wird angenommen, dass das Auftreten der charakteristischen Aggregatsbanden im Grenzfall mit zwei Polymerkonformeren korreliert, die einer Zick-Zack- und einer Helix-Struktur entsprechen. Da hierfür keine experimentellen Beweise durch NMR bis dato vorliegen, wurden TD-DFT Kalkulationen an Oligomereinheiten (22-er) durchgeführt, die die wesentlichen Merkmale der Absorptionsspektren der zwei Konformere reproduzieren konnten. Die anschließenden Kapitel erwuchsen aus der Motivation heraus, die optischen Eigenschaften der Polymere über die Kontrolle der Strukturbildung und somit der intramolekularen Aggregatsbildung zu beeinflussen. Um einerseits J-Aggregat Verhalten zu provozieren wird zunächst der Ansatz verfolgt, durch sterisch anspruchsvolle Gruppen in der 3-Position des Indolenin Gerüsts, den Kollaps zu helikalen Stukturen zu vermeiden. Das resultierende Homopolymer pDiPhSQB mit zwei Phenylgruppen pro Indolenin Einheit zeigt in allen untersuchten Lösemitteln bathochrom verschobene Absorptionsmaxima, was mit der Ausbildung von ausschließlich ausgedehnten Zick-Zack-Ketten begründet werden. Darüber hinaus zeigte die Einkristall-Röntgenstrukturanalyse des Monomers DiPhSQB-2-Br2 als Konsequenz der sterischen Überfrachtung eine Torsion des Indolenin Gerüsts. Die Verdrillung der Molekülgeometrie und der daraus resultierende Verlust an Planarität, führt zu einer erheblichen Verschlechterung der Fluoreszenzeigenschaften, jedoch wird eine signifikante Rotverschiebung der Monomerbande von ca. 1 200 cm-1 im Vergleich zu SQB beobachtet, welche sogar größer als die für dSQB-1 ist. Zum anderen ergibt der Ansatz der partiellen Versteifung des Polymerrückgrades ebenfalls die Ausbildung von ausgedehnten Polymerketten begünstigen. Dieser Ansatz wird insofern verfolgt, als dass jede zweite Biarylachse zwischen zwei Monomereinheiten in pSQB-1 durch eine rigide transoide Benzodipyrrolenin Brücke ersetzt wird. Trotz eines eher geringen durchschnittlichen Polymerisationsgrades von < 10 kann dennoch eine Rotverschiebung der niederenergetischsten Absorptionsbande in allen Lösemitteln beobachtet werden. Um das Bild der intramolekularen Aggregate zu vervollständigen, wird das gezielte Design von H-Aggregaten verfolgt. Hierfür wurde ein Squarain-Squarain Copolymer synthetisiert, das zum einen aus dem klassischen cisoiden Indolenin und zum anderen aus dem cisoiden Chinolin Squarain aufgebaut ist. Diesbezüglich will man sich die Triebkraft des Chinolin Bausteins für Aggregation als strukturdirigierende Komponente zu Nutze machen, um helikale Konformationen der Polymerstränge zu erzeugen. Das Copolymer pSQBC zeigt in der Tat eine verbreiterte, hypsochrom verschobene Hauptabsorptionsbande im Vergleich zur Monomereinheit dSQBC. Die Form der Absorption des Exzitonenbandes zeigt eine geringe Lösemittelabhängigkeit, die ebenfalls nur marginal durch die Temperatur beeinflusst werden kann. Schlussendlich deuten diese Befunde auf ein stark-ausgeprägtes H-Aggregat ähnliches Verhalten hin, was die zu anfangs formulierte These belegt, dass sich die optischen Eigenschaften der Polymere (H- und J-Aggregate) und deren Strukturbildung durch ein adäquates Moleküldesign der Monomerbausteine kontrollieren lassen. Das letzte Kapitel dieser Arbeit stand im Gegensatz zu den vorherigen Kapiteln ausschließlich im Fokus von intermolekularen Aggregaten. Die Squaraine hSQA-1 und hSQA-2 neigen, in ein sternförmiges Hexaarylbenzol-Gerüst gebettet, zur Selbstorganisation. Konzentration- und temperaturabhängige Studien der beiden synthetisierten Hexasquarainyl-Benzole zeigen eine starke Triebkraft zur Aggregation in Aceton. Während hSQA-2 instantan thermodynamisch stabile Aggregate bildet, offenbart hSQA-1 Aggregate eine ausgeprägte kinetische Stabilität. Dies kann man sich zu Nutze machen und die kinetischen Aktivierungsparameter der Aggregation und Deaggregation zu bestimmen. Die Absorptionsspektren der beiden Hexasquarainyl-Benzole im aggregierten Zustand zeigen extreme Unterschiede auf. Während hSQA-1 eine intensive, sehr schmale und stark hypsochrom verschobene Bande zeigt, beobachtet man für das größere Hexasquarainyl-Benzol zwei bathochrom verschobene Banden, die allerdings energetisch sehr nahe der Monomerbande lokalisiert sind. Die sehr geringe Halbwertsbreite der Aggregatsbande in hSQA-1 wird durch die sog. Austauschverschmälerung erklärt und deutet auf hochgeordnete supramolekulare Aggregate hin. Die konzentrationsabhängigen Messdaten der beiden Chromophore konnten sehr gut mit Hilfe des Dimer-Modells angepasst werden, welches für beide Systeme eine hohe Bindungskonstante von über 10^6 M-1 ergab. In Anbetracht der Tatsache, dass die raumgreifenden 3,3-Dimethylgruppen im Indoleningerüst extrem hinderlich für den Aggregationsprozess sind, ist die starke Triebkraft zur Selbstorganisation, welche sich in den hohen Bindungskonstanten niederschlägt, äußerst bemerkenswert. Theoretische Modellierungen und Rechnungen in Kombination mit NMR-spektroskopischen Untersuchungen von hSQA-1 ergeben eine Aggregatsstruktur aus zwei sich stapelten Hexasquarainylbenzolmonomeren, die dem Bild zweier gestapelter Schüsseln entspricht. KW - Squaraine KW - Oligomere KW - Supramolekulare Chemie KW - Squaraine Dyes KW - Oligomers and Polymers KW - J- and H-Aggregates KW - Helix- and Zig-Zag-Conformers KW - Supramolecular Chemistry KW - Squarain Farbstoffe KW - J- and H-Aggregate KW - Helix- and Zick-Zack-Konformere KW - Supramolekulare Chemie KW - Helicität KW - Chemische Synthese KW - Chemische Reaktion Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174272 ER - TY - THES A1 - Wehner, Marius T1 - Supramolecular Polymorphism in Homo- and Heterochiral Supramolecular Polymerizations T1 - Supramolekularer Polymorphismus in homo- und heterochiralen supramolekularen Polymerisationen N2 - The aim of the first part of this thesis was to investigate (R,R)-PBI as a model system for polymorphism at its origin by a supramolecular approach. The pathway complexity of (R,R)-PBI was fine-tuned by experimental parameters such as solvent, temperature and concentration to make several supramolecular polymorphs accessible. Mechanistic and quantum chemical studies on the kinetics and thermodynamics of the supramolecular polymerization of (R,R)-PBI were conducted to shed light on the initial stages of polymorphism. The second part of this work deals with mechanistic investigations on the supramolecular polymerization of the racemic mixture of (R,R)- and (S,S)-PBI with regard to homochiral and heterochiral aggregation leading to conglomerates and a racemic supramolecular polymer, respectively. N2 - Das Ziel des ersten Teils der Dissertation war es, anhand des Modellsystems (R,R)-PBI Polymorphismus mit Hilfe eines supramolekularen Ansatzes an dessen Ursprung zu untersuchen. Durch die Wahl geeigneter experimenteller Parameter wie Lösungsmittel, Temperatur und Konzentration wurden die komplexen Polymerisationspfade von (R,R)-PBI gezielt beeinflusst und verschiedene supramolekulare Polymorphe zugänglich gemacht. Mechanistische und quantenchemische Untersuchungen der Kinetik und Thermodynamik der supramolekularen Polymerisation von (R,R)-PBI wurden durchgeführt, um die Anfangsphase des Polymorphismus zu beleuchten. Der zweite Teil der vorliegenden Arbeit befasst sich mit mechanistischen Untersuchungen der supramolekularen Polymerisation der racemischen Mischung aus (R,R)- und (S,S)-PBI im Hinblick auf homo- und heterochirale Aggregation, welche zu Konglomeraten beziehungsweise einem racemischen supramolekularen Polymer führte. KW - Supramolekulare Chemie KW - Polymorphismus KW - Konglomerat KW - Aggregat KW - Organische Chemie KW - Aggregation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211519 ER - TY - THES A1 - Wagner, Wolfgang T1 - Supramolecular Block Copolymers by Seeded Living Supramolecular Polymerization of Perylene Bisimides T1 - Supramolekulare Blockcopolymere von Perylenbisimiden mittels saat-induzierter lebender supramolekularer Polymerisation N2 - The research on supramolecular polymerization has undergone a rapid development in the last two decades, particularly since supramolecular polymers exhibit a broad variety of functionalities and applications in organic electronics, biological science or as functional materials (Chapter 2.1). Although former studies have focused on investigation of the thermodynamics of supramolecular polymerization (Chapter 2.2), the academic interest in the recent years shifted towards gaining insight into kinetically controlled self-assembly and pathway complexity to generate novel out-of-equilibrium architectures with interesting nanostructures and features (Chapter 2.3). Along this path, the concepts of seeded and living supramolecular polymerization were recently developed to enable the formation of supramolecular polymers with controlled length and low polydispersity under precise kinetic control (Chapter 2.4). Besides that, novel strategies were developed to achieve supramolecular copolymerization resulting in complex multicomponent nanostructures with different structural motives. The classification of these supramolecular copolymers on the basis of literature examples and an overview of previously reported principles to create such supramolecular architectures are provided in Chapter 2.5. The aim of the thesis was the non-covalent synthesis of highly desirable supramolecular block copolymers by the approach of living seeded supramolecular polymerization and to study the impact of the molecular shape of the monomeric building blocks on the supramolecular copolymerization. Based on the structure of the previously investigated PBI organogelator H-PBI a series of novel PBIs, bearing identical hydrogen-bonding amide side-groups in imide-position and various kind or number of substituents in bay-position, was synthesized and analyzed within this thesis. The new PBIs were successfully obtained in three steps starting from the respective bromo-substituted perylene-3,4:9,10-tetracarboxylic acid tetrabutylesters or from the N,N’-dicyclohexyl-1,7-dibromoperylene-3,4:9,10-tetracarboxylic acid bisimide. All target compounds were obtained in the final step by imidization reactions of the respective perylene tetracarboxylic acid bisanhydride precursors with N-(2-aminoethyl)-3,4,5-tris(dodecyloxy)-benzamide and were fully characterized by 1H and 13C NMR spectroscopy as well as high resolution mass spectrometry. The variation of bay-substituents strongly changes the optical properties of the monomeric PBIs which were investigated by UV/vis and fluorescence spectroscopy. The increase of the number of the methoxy-substituents provokes, for example, a red-shift of the absorption maxima concomitant with a decrease of extinction coefficients and leads to a drastic increase of the fluorescence quantum yields. Furthermore, the molecular geometry of the PBIs is also affected by variations of the bay-substituents. Thus, increasing the steric demand of the bay-substituents leads to an enlargement of the twist angles of the PBI cores as revealed by DFT calculations. Especially the 1,7-dimethoxy bay-substituted MeO-PBI proved to be very well-suited for the studies envisioned within this thesis. The self-assembly of this PBI derivative was analyzed in detail by UV/vis, fluorescence and FT-IR spectroscopy as well as atomic force microscopy (Chapter 3). These studies revealed that MeO-PBI forms in a solvent mixture of methylcyclohexane and toluene (2:1, v/v) kinetically trapped off-pathway H-aggregated nanoparticles upon fast cooling of a monomeric solution from 90 to 20 °C. However, upon slow cooling of the monomer solution fluorescent J-type nanofibers are formed by π π interactions and intermolecular hydrogen-bonding. The kinetically metastable off-pathway H-aggregates can be transformed into the thermodynamically more favored J-type aggregates by addition of seeds, which are produced by ultrasonication of the polymeric nanofibers. Interestingly, the living character of this seed-induced supramolecular polymerization process was proven by a newly designed multicycle polymerization experimental protocol. This living polymerization experiment clearly proves, that the polymerization can only occur at the “active” ends of the polymeric seed and that almost no recombination or chain termination processes are present. Hence, the approach of living supramolecular polymerization enables the formation of supramolecular polymers with controlled length and narrow polydispersity. In Chapter 4 the copolymerization of MeO-PBI with the structurally similar 1,7-dichloro (Cl-PBI) and 1,7-dimethylthio (MeS-PBI) bay-substituted PBIs is studied in detail. Both PBIs form analogous to MeO-PBI kinetically trapped off-pathway aggregates, which can be converted into the thermodynamically stable supramolecular polymers by seed-induced living supramolecular polymerization under precise kinetic control. However, the stability of the kinetically trapped aggregates of Cl-PBI and MeS-PBI is distinctly reduced compared to that of MeO-PBI, because the π-π-interactions of the kinetically metastable aggregates are hampered through the increased twisting of the PBI-cores of the former PBIs. UV/vis studies revealed that the two-component seeded copolymerization of the kinetically trapped state of MeO-PBI with seeds of Cl-PBI leads to the formation of unprecedented supramolecular block copolymers with A-B-A pattern by a living supramolecular polymerization process at the termini of the seeds. Remarkably, the resulting A-B-A block pattern of the obtained copolymers was clearly confirmed by atomic force microscopy studies as the respective blocks formed by the individual monomeric units could be distinguished by the pitches of the helical nanofibers. Moreover, detailed UV/vis and AFM studies have shown that by inverted two-component seed-induced polymerization, e.g., upon addition of seeds of MeO-PBI to the kinetically trapped aggregates of Cl-PBI, triblock supramolecular copolymers with B-A-B pattern can be generated. The switching of the block pattern could only be achieved because of the perfectly matching conditions for the copolymerization process and the tailored molecular geometry of the individual building blocks of both PBIs. These studies have demonstrated for the first time, that the block pattern of a supramolecular copolymer can be modulated by the experimental protocol through the approach of living supramolecular polymerization. Furthermore, by UV/vis analysis of the living copolymerization of MeO-PBI and MeS-PBI similar results were obtained showing also the formation of both A-B-A and B-A-B type supramolecular block copolymers. Although for these two PBIs the individual blocks could not be identified by AFM because the helical nanofibers of both PBIs exhibit identical helical pitches, these studies revealed for the first time that the approach of seeded living polymerization is not limited to a special pair of monomeric building blocks. In the last part of the thesis (Chapter 5) a systematic study on the two-component living copolymerization of PBIs with various sterical demanding bay-substituents is provided. Thus, a series of PBIs containing identical hydrogen-bonding amide groups in imide position but variable number (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) or size (EtO-PBI, iPrO-PBI) of alkoxy bay-substituents was investigated. The molecular geometry of the monomeric building blocks has a strong impact on the thermodynamically and even more pronounced on the kinetically controlled aggregation in solvent mixtures of MCH and Tol. While the mono- and dialkoxy-substituted PBIs form kinetically metastable species, the self-assembly of the tri- and tetramethoxy-substituted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) is completely thermodynamically controlled. The two 1,7-alkoxy substituted PBIs (EtO-PBI, iPrO-PBI) form very similar to MeO-PBI kinetically off-pathway H-aggregates and thermodynamically more favored J-type aggregates. However, the stability of the kinetically metastable state is drastically lower and the conversion into the thermodynamically favored state much faster than for MeO-PBI. In contrast, the monomethoxy-substituted PBI derivative (1-MeO-PBI) forms a kinetically trapped species by intramolecular hydrogen-bonding of the monomers, which can be transformed into the thermodynamically favored nanofibers by seeded polymerization. Importantly, the two-component seeded copolymerization of the kinetically trapped MeO PBI with seeds of other PBIs of the present series was studied by UV/vis and AFM revealing that the formation of supramolecular block copolymers is only possible for appropriate combinations of PBI building blocks. Thus, the seeded polymerization of the trapped state of the moderately core-twisted MeO-PBI with the, according to DFT-calculations, structurally similar PBIs (EtO-PBI and iPrO-PBI) leads to the formation of A-B-A block copolymers, like in the seeded copolymerization of MeO-PBItrapped with seeds of Cl-PBI and MeS-PBI already described in Chapter 4. However, by addition of seeds of the almost planar PBIs (H-PBI and 1-MeO-PBI) or seeds of the strongly core-twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) to the kinetically trapped state of MeO-PBI no block copolymers can be obtained. The mismatching geometry of these molecular building blocks strongly hampers both the intermolecular hydrogen-bonding and the π-π-interactions between the two different PBIs and consequently prevents the copolymerization process. Furthermore, the studies of the two-component seeded copolymerization of the kinetically trapped species of 1-MeO-PBI with seeds of the other PBIs also corroborated that a precise shape complementarity is crucial to generate supramolecular block copolymers. Thus, by addition of seeds of H-PBI to the kinetically trapped monomers of 1-MeO-PBI supramolecular block copolymers were generated. Both PBIs exhibit an almost planar PBI core according to DFT-calculations leading to strong non-covalent interactions between these PBIs. This perfectly matching geometry of both PBIs also enables the inverted seeded copolymerization of the kinetically trapped monomers of H-PBI with 1-MeO-PBIseed concomitant with a switching of the block pattern of the supramolecular copolymer from A-B-A to B-A-B type. In contrast, the seeding with the moderately twisted (MeO-PBI, EtO-PBI and iPrO-PBI) and the strongly twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12 MeO-PBI) has no effect on the kinetically trapped state of 1-MeO-PBI, because the copolymerization of these PBIs is prevented by the mismatching geometry of the molecular building blocks. In conclusion, the supramolecular polymerization and two-component seeded copolymerization of a series of PBI monomers was investigated within this thesis. The studies revealed that the thermodynamically and kinetically controlled self-assembly can be strongly modified by subtle changes of the monomeric building blocks. Moreover, the results have shown that living supramolecular polymerization is an exceedingly powerful method to generate unprecedented supramolecular polymeric nanostructures with controlled block pattern and length distribution. The formation of supramolecular block copolymers can only be achieved under precise kinetic control of the polymerization process and is strongly governed by the shape complementarity already imparted in the individual components. Thus, these insightful studies might enable a more rational design of monomeric building blocks for the non-covalent synthesis of highly complex supramolecular architectures with interesting properties for possible future applications, e.g., as novel functional materials. N2 - Das Forschungsgebiet der supramolekularen Polymerisation hat sich in den letzten Jahrzehnten sehr rasch entwickelt, zumal da supramolekulare Polymere eine Fülle an Anwendungsmöglichkeiten in der organischen Elektronik, der Biologie oder als Funktionsmaterialen bieten (Kapitel 2.1). Während frühere Studien den Fokus auf die Untersuchung der Thermodynamik der supramolekularen Polymerisation gelegt haben (Kapitel 2.2), hat sich das akademische Interesse in jüngster Zeit dahingehend verschoben, Einblicke in kinetisch kontrollierte Selbstassemblierungsprozesse zu erhalten, um neuartige Strukturen mit faszinierenden Eigenschaften zu generieren (Kapitel 2.3). Im Zuge dieser Entwicklung wurde das Konzept der Saat-induzierten und der lebenden supramolekularen Polymerisation entwickelt, welche die Bildung von supramolekularen Polymeren mit geringer Polydispersität in kinetisch kontrollierten Prozessen ermöglichen (Kapitel 2.4). Des Weiteren wurden neue Strategien zu Erzeugung von Nanostrukturen entwickelt, die aus verschiedenen Komponenten aufgebaut sind und somit neue komplexe Strukturmotive zeigen. Eine Einteilung dieser supramolekularen Copolymere anhand einiger Literaturbeispiele und eine kurze Übersicht über die bisherigen Methoden, solche supramolekularen Strukturen zu erzeugen ist in Kapitel 2.5 dargestellt. Das Ziel der Doktorarbeit war die nicht-kovalente Synthese von erstrebenswerten supramolekularen Blockcopolymeren mittels lebender Saat-induzierter Polymerisation und zu erforschen, wie die molekulare Form der Monomerbausteine die supramolekulare Copolymerisation beeinflusst. Basierend auf der Molekülstruktur des zuvor untersuchten Perylenbisimidfarbstoffes H-PBI wurden in dieser Arbeit eine Reihe von neuen Perylenbisimiden mit identischen Amid-Seitengruppen in Imidposition und unterschiedlicher Art oder Anzahl von Buchtsubstituenten synthetisiert und charakterisiert. Die neuen Perylenbisimide wurden erfolgreich in drei Stufen durch neu entwickelte Syntheserouten erhalten, wobei von den jeweiligen Brom substituierten Perylen-3,4:9,10-tetracarbonsäuretetrabutylestern oder von N,N‘ Dicyclohexyl-1,7-dibromperylen-3,4:9,10-tetracarbonsäurebisimid ausgegangen wurde. Alle Zielverbindungen wurden im letzten Syntheseschritt mittels einer Imidisierungsreaktion der jeweiligen Perylenbisanhydridvorstufen mit N (2-Aminoethyl)-3,4,5-tris(dodecyloxy)benzamid erhalten und mittels 1H- und 13C NMR-Spektroskopie sowie mit hochauflösender Massenspektrometrie charakterisiert. Die Variation der Buchtsubstituenten hat einen starken Einfluss auf die optischen Eigenschaften der Perylenbisimidmonomere, was mittels UV/vis- und Fluoreszenzspektroskopie untersucht wurde. Die ansteigende Zahl der Methoxysubstituenten verursacht zum Beispiel eine Rotverschiebung der Absorptionsmaxima, welche mit einer Abnahme der Extinktionskoeffizienten einhergeht, und führt zu einem starken Anstieg der Fluoreszenzquantenausbeute. Außerdem wird auch die Molekülgeometrie der Perylenbisimide durch die Variation der Buchtsubstituenten beeinflusst. Mittels DFT-Rechnungen konnte gezeigt werden, dass eine Zunahme des sterischen Anspruchs der Buchtsubstituenten eine Vergrößerung des Torsionswinkels der Perylenbisimidkerne zur Folge hat. Als besonders geeignet für die im Rahmen dieser Arbeit anvisierten Studien erwies sich das mit zwei Methylgruppen in 1,7-Buchtposition substituierte MeO-PBI. Die Selbstassemblierung dieses 1,7-Dimethoxy-substituierten Perylenbisimid-Derivates wurde mit Hilfe von UV/vis-, Fluoreszenz- und FT-IR-Spektroskopie sowie mittels Rasterkraftmikroskopie detailliert analysiert (Kapitel 3). Diese Studien haben gezeigt, dass MeO-PBI in einem Lösungsmittelgemisch aus Methylcyclohexan und Toluol (2:1, v/v) in einem kinetisch kontrollierten Prozess durch schnelles Abkühlen der Monomerlösung von 90 auf 20 °C „off-pathway“ Nanopartikel ausbildet. Durch langsames Abkühlen der Monomerlösung entstehen hingegen fluoreszierende, J-aggregierte Nanofasern aufgrund von π-π-Wechselwirkungen und intermolekularen Wasserstoffbrückenbindungen. Die kinetisch metastabilen „off-pathway“ H-Aggregate können durch Zugabe einer polymeren J-Aggregat-Saat, welche durch eine Behandlung der polymeren Nanofasern mit Ultraschall gewonnen werden kann, in die thermodynamisch begünstigten J-Aggregate transformiert werden. Außerdem wurde der lebende Charakter dieser supramolekularen Saat-induzierten Polymerisation durch ein neu entworfenes multizyklisches Versuchsprotokoll nachgewiesen. Diese Experimente zur lebenden supramolekularen Polymerisation zeigen deutlich, dass der Polymerisationsprozess nur an den „aktiven“ Enden der polymeren Saat stattfinden kann und dass außerdem kaum Rekombinations- oder Kettenterminationsprozesse auftreten. Folglich ermöglicht die Methode der lebenden supramolekularen Polymerisation die Synthese von supramolekularen Polymeren mit kontrollierbarer Polymerlänge und geringer Polydispersität. In Kapitel 4 wird die Copolymerisation von MeO-PBI mit den strukturell ähnlichen 1,7 Dichlor- (Cl-PBI) und 1,7-Dimethylthiosubstituierten (MeS-PBI) Perylenbisimiden ausgeführt. Beide neuen Perylenbisimide bilden analog zu MeO-PBI „off-pathway“ Aggregate, die durch Saatzugabe in einem kinetisch kontrollierten Prozess in die thermodynamisch stabileren supramolekularen Polymere umgewandelt werden können. Die Stabilität der kinetisch gefangenen Aggregate von Cl-PBI und MeS-PBI ist jedoch verglichen mit den metastabilen Aggregaten von MeO-PBI deutlich geringer, da die π π Wechselwirkungen zwischen den molekularen Bausteinen aufgrund des vergrößerten Torsionswinkels der Peryleneinheiten stark reduziert sind. UV/vis-spektroskopische Studien zeigen, dass die Saat-induzierte Copolymerisation des kinetisch gefangenen Zustandes von MeO-PBI mit der Saat von Cl-PBI durch einen lebenden Kettenwachstumsprozess an den Polymerenden der Saat zur Ausbildung von neuartigen supramolekularen Blockcopolymeren mit A B A Blockstruktur führt. Die erzeugte A-B-A-Blockstruktur der erhaltenen Copolymere konnte eindeutig mittels Rasterkraftmikroskopie bestätigt werden, da die jeweiligen Polymerblöcke bestehend aus den einzelnen monomeren Einheiten anhand der Ganghöhe der helikalen Nanofasern unterschieden werden können. Ausführliche UV/vis- und Rasterkraftmikroskopiestudien haben außerdem demonstriert, dass, zum Beispiel durch Zugabe der Saat von MeO-PBI zu den kinetisch gefangenen Aggregaten von Cl PBI, Triblockcopolymere mit B-A-B-Blockstruktur in einer invertierten Saat-induzierten Zweikomponenten-Copolymerisation, erzeugt werden können. Dieser Wechsel der Blockstruktur kann nur durch perfekt abgestimmte Bedingungen für die Copolymerisation und bei übereinstimmender Molekülgeometrie der Monomereinheiten erreicht werden. Diese Studien zeigen erstmals, dass die Blockstruktur der supramolekularen Polymere durch das Versuchsprotokoll der lebenden supramolekularen Polymerisation variiert werden kann. Des Weiteren lieferten UV/vis-spektroskopische Untersuchungen der lebenden Copolymerisation von MeO-PBI und MeS-PBI ähnliche Ergebnisse, was darauf hindeutet, dass ebenfalls supramolekulare Blockcopolymere mit A-B-A- und B-A-B-Struktur gebildet werden können. Obwohl die einzelnen Polymerblöcke in diesem Fall wegen der identischen Helixganghöhe der Nanofasern nicht zugeordnet werden konnten, so zeigten diese Experimente doch, dass die Methode der Saat-induzierten lebenden Polymerisation nicht auf ein spezielles Paar von Monomerbausteinen limitiert ist. Im letzten Abschnitt der Doktorarbeit (Kapitel 5) wird eine systematische Studie der lebenden Zweikomponenten-Copolymerisation von Perylenbisimiden mit unterschiedlich sterisch anspruchsvollen Buchtsubstituenten dargestellt. Dementsprechend wurde eine Reihe von Perylenbisimiden mit identischen Amidseitenketten, aber unterschiedlicher Anzahl (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) oder Größe (EtO PBI, iPrO-PBI) der Alkoxybuchtsubstituenten untersucht. Die Molekülgeometrie der Monomereinheiten hat einen starken Einfluss auf das thermodynamisch und mehr noch auf das kinetisch kontrollierte Aggregationsverhalten in Lösungsmittelgemischen aus Methylcyclohexan und Toluol. Während die mono- und dialkoxysubstituierten Perylenbisimide kinetisch metastabile Zustände ausbilden, findet die Selbstassemblierung der tri- und tetramethoxysubstituierten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) vollständig unter thermodynamischer Kontrolle statt. Die zwei 1,7 alkoxysubstituierten Perylenbisimide (EtO-PBI, iPrO-PBI) bilden analog zu MeO PBI sowohl kinetische „off-pathway“ H-Aggregate als auch thermodynamisch begünstigte J Aggregate. Verglichen mit MeO-PBI ist jedoch die Stabilität der kinetisch metastabilen Zustände von EtO-PBI und iPrO-PBI viel geringer und die Umwandlung in die thermodynamisch stabileren Aggregate geschieht daher viel schneller. Das monomethoxysubstituierte Perylenbisimid-Derivat (1 MeO PBI) bildet im Gegensatz dazu kinetisch gefangene Monomere durch intramolekulare Wasserstoffbrücken-bindungen, welche sich durch Saat-induzierte Polymerisation in die thermodynamisch begünstigteren Nanofasern transformieren lassen. Die Saat-induzierte Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von MeO-PBI durch Saatzugabe der anderen Perylenbisimide der Reihe wurde mittels UV/vis-Spektroskopie und Rasterkraftmikroskopie analysiert. Diese Studien eröffneten, dass die Bildung von supramolekularen Blockcopolymeren nur für geometrisch passende Kombinationen der Perylenbisimide möglich ist. Dementsprechend führt die Saat-induzierte Polymerisation des kinetisch gefangenen Zustands von MeO-PBI mit den, laut DFT Rechnungen, strukturell ähnlichen Perylenbisimiden (EtO-PBI, iPrO-PBI) zur Bildung von A B A Blockcopolymeren, analog zu dem im Kapitel 4 beschriebenem Fall der Saat induzierten Copolymerisation mit Cl-PBI und MeS-PBI. Die Zugabe einer Saat der planaren Perylenbisimide (H-PBI, 1-MeO-PBI) oder der Perylenbisimide mit stark verdrehten Perylenkernen (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) zum kinetisch metastabilen Zustand von MeO-PBI führt dagegen nicht zur Bildung von Blockcopolymeren. Der Unterschied in der Molekülgeometrie dieser Monomerbausteine vermindert erheblich die Stärke der π π Wechselwirkungen zwischen den unterschiedlichen Perylenbisimiden und verhindert daher deren Copolymerisation. Die Studien zur Saat induzierten Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von 1-MeO-PBI mit den anderen Perylenbisimiden der Serie bestätigte weiterhin, dass eine genaue Übereinstimmung der molekularen Geometrie entscheidend für die Erzeugung von supramolekularen Blockcopolymeren ist. Durch Zugabe der Saat von H-PBI zum kinetisch metastabilen Zustand von 1-MeO-PBI konnten folglich supramolekulare Blockcopolymere generiert werden. Mittels DFT-Rechnungen wurde gezeigt, dass beide Perylenbisimide einen relativ planaren Perylenkern aufweisen, was zu sehr starken, nicht-kovalenten Wechselwirkungen zwischen diesen beiden Monomerbausteinen führt. Die übereinstimmende Geometrie beider Perylenbisimide ermöglicht auch die invertierte Saat-induzierte Copolymerisation des kinetisch gefangenen Zustands von H-PBI mit 1-MeO-PBISaat, was mit einem Wechsel der Blockstruktur des supramolekularen Blockcopolymers von A B A zu B A B einhergeht. Die Zugabe der Saat der mäßig (EtO-PBI, iPrO PBI) und stark verdrehten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) hat im Gegensatz dazu keinen Effekt auf den kinetisch gefangenen Zustand von 1-MeO-PBI, da die Copolymerisation dieser Perylenbisimide durch die Nichtübereinstimmung der Molekülgeometrie der Monomerbausteine verhindert wird. Abschließend lässt sich zusammenfassen, dass in dieser Arbeit die supramolekulare Polymerisation und Saat-induzierte Zweikomponenten-Copolymerisation einer Reihe von Perylenbisimidmonomeren untersucht worden ist. Die Studien haben demonstriert, dass die thermodynamisch und kinetisch kontrollierten Selbstassemblierungsprozesse durch subtile Änderungen der Monomerbausteine stark variiert werden können. Außerdem zeigen die Ergebnisse, dass die lebende supramolekulare Polymerisation eine sehr leistungsfähige Methode zur Erzeugung von neuartigen supramolekularen, polymeren Nanostrukturen mit kontrollierter Blockstruktur und Längenverteilung darstellt. Die Bildung dieser supramolekularen Blockcopolymere kann nur unter präziser kinetischer Kontrolle erreicht werden und ist durch die Komplementarität der einzelnen molekularen Komponenten stark beeinflusst. Diese aufschlussreichen Studien bilden möglicherweise die Grundlage für ein rationaleres Design neuer Monomerbausteine zur nicht-kovalenten Synthese von hochkomplexen, supramolekularen Strukturen mit potentiell einzigartigen Eigenschaften für mögliche Anwendungen, beispielsweise als neuartige Funktionsmaterialien. KW - Supramolekulare Chemie KW - Perylenbisdicarboximide KW - Lebende Polymerisation KW - Aggregation KW - Supramolecular Block Copolymers KW - Perylenbisimides KW - Kinetic Self-assembly KW - Living Polymerisation KW - Organische Chemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193004 ER - TY - THES A1 - Lohr, Andreas T1 - Self-Assembly of Merocyanines : Thermodynamic and Kinetic Insights into the Formation of Well-Defined Dye Aggregates T1 - Selbstorganisation von Merocyaninen : Thermodynamische und Kinetische Einblicke in die Bildung definierter Farbstoffaggregate N2 - The present thesis demonstrates the potential of dipolar aggregation of merocyanine dyes as novel directional and specific supramolecular binding motif for the creation of more elaborate supramolecular architectures beyond simple dimers. Furthermore, the self-assembly studies into bis(merocyanine) nanorods gave new insights into the kinetics of morphogenesis in supramolecular aggregates. N2 - In der vorliegenden Arbeit konnte das Potential der dipolaren Aggregation von Merocyaninfarbstoffen als neuartiges, gerichtetes und spezifisches Bindungsmotif zum Aufbau wesentlich komplexerer supramolekularer Architekturen als einfachen Dimeren aufgezeigt werden. Desweiteren lieferten Studien zur Selbstorganisation von Bis(merocyanin)-Nanostäbchen neue Erkenntnisse zur Morphogenese supramolekularer Aggregate. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Farbstoff KW - Kinetik KW - Merocyanin KW - H-Aggregate KW - Nanostrukturen KW - Chiralität KW - Merocyanine KW - H-Aggregate KW - Nanostructure KW - Chirality Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28964 ER - TY - THES A1 - Stepanenko, Vladimir T1 - Self-Assembly of Bay-Substituted Perylene Bisimide by Ligand-Metal Ion Coordination T1 - Selbstorganisation der Bay-substituierten Perylenbisimiden durch Metallionen-induzierte Koordination N2 - The subject of this thesis is the synthesis and characterization of PBI-based fluorescent metallosupramolecular polymers and cyclic arrays. Terpyridine receptor functionalized PBIs of predesigned geometry have been used as building blocks to construct desired macromolecular structures through metal-ion-directed self-assembly. These metallosupramolecular architectures have been investigated by NMR, UV/Vis and fluorescence spectroscopy, mass spectrometry, and atomic force microscopy. N2 - Die vorliegende Arbeit beschäftigt sich mit der Synthese und Charakterisierung von fluoreszierenden metallsupramolekularen Koordinations-polymeren und Makrozyklen. Als Bausteine für die Bildung dieser makromolekularen Strukturen durch Metallionen-induzierte Selbstorganisationsprozesse wurden Terpyridin-funktionalisierte Perylenbisimide verwendet, welche bereits die benötigte Geometrie besitzen. Die Charakterisierung der Komplexbildung und der optischen Eigenschaften der gebildeten metallsupramolekularen Architekturen, sowie die Visualisierung der Makromoleküle und Charakterisierung ihrer Organisationseigenschaften auf verschiedenen Oberflächen wurden durchgeführt. KW - Supramolekulare Chemie KW - Supramolekulare Struktur KW - Fluoreszenz KW - Zweidimensionale NMR-Spektroskopie KW - NMR-Spektroskopie KW - Protonen-NMR-Spektroskopie KW - Zink KW - Polymerlösung KW - Polymere KW - Funktionelle Polymere KW - DOSY-NMR KW - UV/Vis-Absorption KW - cyclische Trimere KW - Metall-Ion KW - Koordinationspolymere KW - Perylenbisimid KW - Perylenbisanhydrid KW - cyclic trimer KW - coordination polymer KW - fluorescence KW - supramolecular chemistry KW - metal-ion-ligand coordination KW - DOSY-NMR Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-32063 ER - TY - THES A1 - Rest, Christina T1 - Self-assembly of amphiphilic oligo(phenylene ethynylene)-based (bi)pyridine ligands and their Pt(II) and Pd(II) complexes T1 - Selbstorganisation von amphiphilen oligo(phenylenethinylen)-basierten (Bi)pyridin-Liganden und ihrer Pt(II) und Pd(II) Komplexe N2 - The presented work in the field of supramolecular chemistry describes the synthesis and detailed investigation of (bi)pyridine-based oligo(phenylene ethynylene) (OPE) amphiphiles, decorated with terminal glycol chains. The metal-ligating property of these molecules could be exploited to coordinate to Pd(II) and Pt(II) metal ions, respectively, resulting in the creation of novel metallosupramolecular π-amphiphiles of square-planar geometry. The focus of the presented studies is on the self-assembly behaviour of the OPE ligands and their corresponding metal complexes in polar and aqueous environment. In this way, the underlying aggregation mechanism (isodesmic or cooperative) is revealed and the influence of various factors on the self-assembly process in supramolecular systems is elucidated. In this regard, the effect of the molecular design of the ligand, the coordination to a metal centre as well as the surrounding medium, the pH value and temperature is investigated. N2 - Die vorliegende Arbeit auf dem Gebiet der Supramolekularen Chemie beschäftigt sich mit der Synthese und detaillierten Untersuchung von (bi)pyridin-basierten Oligo(phenylenethinylen) (OPE)-Amphiphilen mit endständigen Glykolketten. Die komplexierende Eigenschaft dieser Moleküle wurde ausgenutzt um sie an Pd(II) bzw. Pt(II) Metallionen zu koordinieren, wobei neuartige metallosupramolekulare π-Amphiphile von quadratisch-planarer Geometrie entstehen. Das Hauptaugenmerk der beschriebenen Studien liegt auf der Selbstorganisation der OPE-Liganden und ihrer Metallkomplexe in polarer und wässriger Umgebung. Dabei wurde der zu Grunde liegende Aggregationsmechanismus (isodesmisch oder kooperativ) bestimmt und der Einfluss verschiedener Faktoren auf den Selbstorganisationsprozess in supramolekularen Systemen aufzeigt. Neben dem Effekt des Moleküldesigns des Liganden und dessen Koordination an ein Metallzentrum wird auch der des umgebenden Mediums, des pH-Wertes sowie der Temperatur erläutert. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Kooperativität KW - Aggregat KW - Amphiphile Verbindungen KW - cooperativity KW - non-covalent interactions KW - (bi)pyridine-based ligand KW - oligo(phenylene ethynylene) (OPE) KW - self-assembly KW - metallosupramolecular π-amphiphiles KW - Aggregation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-133248 ER -