TY - JOUR A1 - Rödel, Michaela A1 - Baumann, Katrin A1 - Groll, Jürgen A1 - Gbureck, Uwe T1 - Simultaneous structuring and mineralization of silk fibroin scaffolds JF - Journal of Tissue Engineering N2 - Silk fibroin is commonly used as scaffold material for tissue engineering applications. In combination with a mineralization with different calcium phosphate phases, it can also be applied as material for bone regeneration. Here, we present a study which was performed to produce mineralized silk fibroin scaffolds with controlled macroporosity. In contrast to former studies, our approach focused on a simultaneous gelation and mineralization of silk fibroin by immersion of frozen silk fibroin monoliths in acidic calcium phosphate solutions. This was achieved by thawing frozen silk fibroin monoliths in acidic calcium phosphate solution, leading to the precipitation of monocalcium phosphate within the silk fibroin matrix. In the second approach, a conversion of incorporated -tricalcium phosphate particles into brushite was successfully achieved. Furthermore, a controlled cryostructuring process of silk fibroin scaffolds was carried out leading to the formation of parallel-oriented pores with diameters of 30-50 mu m. KW - Brushite KW - calcium phosphate KW - cryostructuring KW - hydrogel KW - mineralization KW - silk fibroin scaffolds Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-226427 VL - 9 ER - TY - JOUR A1 - Salgarella, Alice Rita A1 - Zahoranová, Anna A1 - Šrámková, Petra A1 - Majerčíková, Monika A1 - Pavlova, Ewa A1 - Luxenhofer, Robert A1 - Kronek, Juraj A1 - Lacík, Igor A1 - Ricotti, Leonardo T1 - Investigation of drug release modulation from poly(2-oxazoline) micelles through ultrasound JF - Scientific Reports N2 - Among external stimuli used to trigger release of a drug from a polymeric carrier, ultrasound has gained increasing attention due to its non-invasive nature, safety and low cost. Despite this attention, there is only limited knowledge about how materials available for the preparation of drug carriers respond to ultrasound. This study investigates the effect of ultrasound on the release of a hydrophobic drug, dexamethasone, from poly(2-oxazoline)-based micelles. Spontaneous and ultrasound-mediated release of dexamethasone from five types of micelles made of poly(2-oxazoline) block copolymers, composed of hydrophilic poly(2-methyl-2-oxazoline) and hydrophobic poly(2-n-propyl-2-oxazoline) or poly(2-butyl-2-oxazoline-co-2-(3-butenyl)-2-oxazoline), was studied. The release profiles were fitted by zeroorder and Ritger-Peppas models. The ultrasound increased the amount of released dexamethasone by 6% to 105% depending on the type of copolymer, the amount of loaded dexamethasone, and the stimulation time point. This study investigates for the first time the interaction between different poly(2-oxazoline)-based micelle formulations and ultrasound waves, quantifying the efficacy of such stimulation in modulating dexamethasone release from these nanocarriers. KW - Acoustics KW - Biomedical engineering KW - Drug delivery KW - Materials chemistry Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-227277 VL - 8 ER - TY - JOUR A1 - Petschke, Danny A1 - Staab, Torsten E.M. T1 - DLTPulseGenerator: a library for the simulation of lifetime spectra based on detector-output pulses JF - SoftwareX N2 - The quantitative analysis of lifetime spectra relevant in both life and materials sciences presents one of the ill-posed inverse problems and, hence, leads to most stringent requirements on the hardware specifications and the analysis algorithms. Here we present DLTPulseGenerator, a library written in native C++ 11, which provides a simulation of lifetime spectra according to the measurement setup. The simulation is based on pairs of non-TTL detector output-pulses. Those pulses require the Constant Fraction Principle (CFD) for the determination of the exact timing signal and, thus, the calculation of the time difference i.e. the lifetime. To verify the functionality, simulation results were compared to experimentally obtained data using Positron Annihilation Lifetime Spectroscopy (PALS) on pure tin. KW - lifetime spectroscopy KW - signal processing KW - pulse simulation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176883 VL - 7 ER - TY - JOUR A1 - Staab, Thorsten E. M. A1 - Folegati, Paola A1 - Wolfertz, Iris A1 - Puska, Martti J. T1 - Stability of Cu-precipitates in Al-Cu alloys JF - Applied Sciences N2 - We present first principle calculations on formation and binding energies for Cu and Zn as solute atoms forming small clusters up to nine atoms in Al-Cu and Al-Zn alloys. We employ a density-functional approach implemented using projector-augmented waves and plane wave expansions. We find that some structures, in which Cu atoms are closely packed on {100}-planes, turn out to be extraordinary stable. We compare the results with existing numerical or experimental data when possible. We find that Cu atoms precipitating in the form of two-dimensional platelets on {100}-planes in the fcc aluminum are more stable than three-dimensional structures consisting of the same number of Cu-atoms. The preference turns out to be opposite for Zn in Al. Both observations are in agreement with experimental observations. KW - aluminum copper alloys KW - Guinier-Preston zones KW - precipitates KW - ab initio calculations KW - DFT-LDA Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176866 VL - 8 IS - 6 ER - TY - THES A1 - Hochleitner, Gernot T1 - Advancing melt electrospinning writing for fabrication of biomimetic structures T1 - Entwicklung des Melt Electrospinning Writing zur Erzeugung biomimetischer Strukturen N2 - In order to mimic the extracellular matrix for tissue engineering, recent research approaches often involve 3D printing or electrospinning of fibres to scaffolds as cell carrier material. Within this thesis, a micron fibre printing process, called melt electrospinning writing (MEW), combining both additive manufacturing and electrospinning, has been investigated and improved. Thus, a unique device was developed for accurate process control and manufacturing of high quality constructs. Thereby, different studies could be conducted in order to understand the electrohydrodynamic printing behaviour of different medically relevant thermoplastics as well as to characterise the influence of MEW on the resulting scaffold performance. For reproducible scaffold printing, a commonly occurring processing instability was investigated and defined as pulsing, or in extreme cases as long beading. Here, processing analysis could be performed with the aim to overcome those instabilities and prevent the resulting manufacturing issues. Two different biocompatible polymers were utilised for this study: poly(ε-caprolactone) (PCL) as the only material available for MEW until then and poly(2-ethyl-2-oxazoline) for the first time. A hypothesis including the dependency of pulsing regarding involved mass flows regulated by the feeding pressure and the electrical field strength could be presented. Further, a guide via fibre diameter quantification was established to assess and accomplish high quality printing of scaffolds for subsequent research tasks. By following a combined approach including small sized spinnerets, small flow rates and high field strengths, PCL fibres with submicron-sized fibre diameters (fØ = 817 ± 165 nm) were deposited to defined scaffolds. The resulting material characteristics could be investigated regarding molecular orientation and morphological aspects. Thereby, an alignment and isotropic crystallinity was observed that can be attributed to the distinct acceleration of the solidifying jet in the electrical field and by the collector uptake. Resulting submicron fibres formed accurate but mechanically sensitive structures requiring further preparation for a suitable use in cell biology. To overcome this handling issue, a coating procedure, by using hydrophilic and cross-linkable star-shaped molecules for preparing fibre adhesive but cell repellent collector surfaces, was used. Printing PCL fibre patterns below the critical translation speed (CTS) revealed the opportunity to manufacture sinusoidal shaped fibres analogously to those observed using purely viscous fluids falling on a moving belt. No significant influence of the high voltage field during MEW processing could be observed on the buckling phenomenon. A study on the sinusoidal geometry revealed increasing peak-to-peak values and decreasing wavelengths as a function of decreasing collector speeds sc between CTS > sc ≥ 2/3 CTS independent of feeding pressures. Resulting scaffolds printed at 100 %, 90 %, 80 % and 70 % of CTS exhibited significantly different tensile properties, foremost regarding Young’s moduli (E = 42 ± 7 MPa to 173 ± 22 MPa at 1 – 3 % strain). As known from literature, a changed morphology and mechanical environment can impact cell performance substantially leading to a new opportunity of tailoring TE scaffolds. Further, poly(L-lactide-co-ε-caprolactone-co-acryloyl carbonate) as well as poly(ε-caprolactone-co-acryloyl carbonate) (PCLAC) copolymers could be used for MEW printing. Those exhibit the opportunity for UV-initiated radical cross-linking in a post-processing step leading to significantly increased mechanical characteristics. Here, single fibres of the polymer composed of 90 mol.% CL and 10 mol.% AC showed a considerable maximum tensile strength of σmax = 53 ± 16 MPa. Furthermore, sinusoidal meanders made of PCLAC yielded a specific tensile stress-strain characteristic mimicking the qualitative behaviour of tendons or ligaments. Cell viability by L929 murine fibroblasts and live/dead staining with human mesenchymal stem cells revealed a promising biomaterial behaviour pointing out MEW printed PCLAC scaffolds as promising choice for medical repair of load-bearing soft tissue. Indeed, one apparent drawback, the small throughput similar to other AM methods, may still prevent MEW’s industrial application yet. However, ongoing research focusses on enlargement of manufacturing speed with the clear perspective of relevant improvement. Thereby, the utilisation of large spinneret sizes may enable printing of high volume rates, while downsizing the resulting fibre diameter via electrical field and mechanical stretching by the collector uptake. Using this approach, limitations of FDM by small nozzle sizes could be overcome. Thinking visionary, such printing devices could be placed in hospitals for patient-specific printing-on-demand therapies one day. Taking the evolved high deposition precision combined with the unique small fibre diameter sizes into account, technical processing of high performance membranes, filters or functional surface finishes also stands to reason. N2 - Um biomimetische extrazelluläre Matrices für das Tissue Engineering herzustellen, bedienen sich aktuelle Forschungsansätze oftmals der Produktion von Faser-Konstrukten durch additive Fertigung oder Elektrospinn-Verfahren. Das sogenannte Melt Electrospinning Writing (MEW) kombiniert Vorteile beider Techniken und weist dadurch ein hohes Applikationspotential auf. Daher bestand das Ziel der vorliegenden Arbeit in der Weiterentwicklung und Erforschung des MEW. Für diesen Zweck wurde eine neuartige Forschungsanlage konzipiert und gebaut, welche mit einzigartiger Verfahrenspräzision und Prozesskontrolle die Fertigung von hochqualitativen Konstrukten ermöglichte. Auf Basis dessen konnten die durchgeführten Studien das Verständnis des elektrohydrodynamischen Druckvorgangs und der untersuchten Prozessparameter vertiefen und letztendlich zur Ausweitung des Verfahrens auf neue medizinisch relevante Thermoplaste beitragen. Um eine reproduzierbare Herstellung von Scaffolds zu ermöglichen, wurde eine häufig auftretende Prozessinstabilität erforscht und als pulsing, oder in stark ausgeprägten Fällen als long beading, klassifiziert. Durch Prozessanalyse konnte zudem eine Methode zur Vermeidung dieser Instabilität entwickelt werden. Dafür wurden zwei unterschiedliche biokompatible Polymere verwendet: Poly(ε-Caprolacton) (PCL) als bis dahin einziger verfügbarer MEW Werkstoff, sowie erstmalig Poly(2-Ethyl-2-Oxazolin). Die aufgestellte Hypothese umfasst eine universelle Abhängigkeit der pulsing Instabilität zu involvierten Massenströmen, welche durch Anpassung des angelegten Prozessdruckes und der elektrischen Feldstärke reguliert werden kann. Um ein optimales Prozessergebnis für nachfolgende Forschungsarbeiten zu erzielen, wurde zusätzlich ein Leitfaden zur quantitativen Bewertung des Grades der Instabilität bereitgestellt. Durch Kombination kleiner Spinndüsen, kleiner Schmelze-Flussraten und hoher elektrischen Feldstärken, konnten erstmalig PCL Fasern mit sub-mikron Durchmessern (fØ = 817 ± 165 nm) zu präzisen Scaffolds verarbeitet werden. Diese wurden anschließend durch materialwissenschaftliche Analytik charakterisiert. Dabei wurde eine molekulare Vorzugsorientierung und isotrope Kristallausrichtung entlang der Faser beobachtet, welche durch den hohen Verstreckungsgrad des erstarrenden Polymerstrahls erklärt werden konnte. Resultierende sub-mikron Fasern konnten zwar für einen akkuraten Druckvorgang verwendet werden, jedoch erwiesen sich die Strukturen als instabil und daher nicht geeignet für die Handhabung bei Zellkulturstudien. Aus diesem Grund wurde ein Beschichtungsansatz mittels hydrophilen und vernetzbaren Sternmolekülen für Substratflächen herangezogen. Während solche modifizierten Oberflächen bekanntermaßen Zelladhäsion verhindern, konnten gedruckte sub-mikron Scaffolds auf der Oberfläche haften und so für biologische Studien verwendet werden. Durch das gezielte Ablegen von Fasern unterhalb der kritischen Translationsgeschwindigkeit (CTS) des Kollektors, konnten sinusförmige Faserstrukturen erzeugt werden. Analog zu rein viskosen Fluiden, welche durch ein bewegliches Band aufgesammelt werden, schien dieser Vorgang dem sogenannten buckling zu unterliegen und daher phänomenologisch nicht oder nur geringfügig vom elektrischen Feld abhängig zu sein. Zudem konnte eine durchgeführte Studie die direkte Abhängigkeit der Fasergeometrie mit der Kollektorbewegung belegen. Unabhängig vom Prozessdruck, führte eine verminderte Kollektorgeschwindigkeit sc in den Grenzen CTS > sc ≥ 2/3 CTS zu erhöhten Amplituden bzw. Spitze-zu-Spitze Werten und verkürzten Wellenlängen. Durch das kontrollierte Ablegen der Fasern bei Geschwindigkeiten von 100 %, 90 % 80 % und 70 % CTS konnten zudem Scaffolds mit unterschiedlichen mechanischen Eigenschaften hergestellt werden. Speziell der Zugmodul wurde dadurch etwa um eine halbe Größenordnung moduliert (Es = 42 ± 7 MPa bis 173 ± 22 MPa bei 1 – 3 % Dehnung). Dies ist in Kombination mit der Strukturierung für maßgeschneiderte TE Scaffolds von großem Interesse, da zelluläre Systeme sensibel auf ihre Umgebung reagieren können. Des Weiteren wurden Poly(L-Lactid-co-ε-Caprolacton-co-Acryloylcarbonat) und Poly(ε-Caprolacton-co-Acryloylcarbonat) (PCLAC) Copolymere hinsichtlich deren MEW Verarbeitbarkeit untersucht. Solche Kunststoffe können nach dem Druckvorgang mit UV-Strahlung radikalisch vernetzt werden und dadurch deutlich erhöhte mechanische Eigenschaften ausbilden. Für Fasern aus 90 mol.% CL und 10 mol.% AC wurden beispielsweise maximale Zugfestigkeiten von σmax = 53 ± 16 MPa ermittelt. MEW gedruckte sinusförmige Faserstrukturen aus PCLAC wiesen darüber hinaus ein biomimetisches Spannungs-Dehnung-Verhalten auf, vergleichbar zu Sehnen- und Ligamentgewebe. Eine Untersuchung der Zellviabilität von L929 murinen Fibroblasten im Eluattest, sowie eine lebend/tot-Färbung von humanen mesenchymalen Stammzellen auf den Scaffolds, ergab vielversprechende Resultate und damit ein relevantes Anwendungspotential solcher Strukturen als Implantat. Neben genannten Vorteilen, weist MEW als Verfahren bislang allerdings geringe Produktionsgeschwindigkeiten auf. Diese sind daher in den Fokus aktueller Forschungsvorhaben gerückt. Einen Ansatz hierfür bieten Spinndüsen mit hohem Innendurchmesser und erhöhter Austragsrate, wobei die optimierte elektrische Feldstärke, sowie ein Verstrecken durch die Kollektorbewegung, zu den erwünschten dünnen Fasern führen können. Dadurch kann die abwärtslimitierte Düsengröße des FDM Verfahrens überwunden werden. Visionär gedacht, könnte eine solche Anlage direkt in Krankenhäusern zur Fertigung von patienten- und defektspezifischen Implantaten eingesetzt werden. Darüber hinaus ermöglicht die hohe Präzision, zusammen mit dem Drucken von Mikro-Fasern, einen technischen Einsatz zur Herstellung von Membranen, Filtern oder funktionalen Oberflächenbeschichtungen. KW - scaffold KW - polymer KW - 3D printing KW - additive manufacturing KW - melt electrospinning KW - melt electrowriting KW - tissue engineering KW - polymer processing Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-162197 ER - TY - THES A1 - Munzert, Stefanie Martina T1 - Coordination of dynamic metallosupramolecular polymers (MEPEs) T1 - Koordination von dynamischen metallosupramolekularen Polyelektrolyten (MEPE) N2 - Several transition metal ions, like Fe2+, Co2+, Ni2+, and Zn2+ complex to the ditopic ligand 1,4-bis(2,2’:6’,2’’-terpyridin-4’-yl)benzene. Due to the high association constant, metal ion induced self-assembly of Fe2+, Co2+, and Ni2+ leads to extended, rigid-rod like metallo-supramolecular coordination polyelectrolytes (MEPEs) even in aqueous solution. Here, the kinetics of coordination and the kinetics of growth of MEPEs are presented. The species in solutions are analyzed by stopped-flow fluorescence spectroscopy, light scattering, viscometry and cryogenic transmission electron microscopy. At near-stoichiometric amounts of the reactants, high molar masses are obtained, which follow the order Ni-MEPE ~ Co-MEPE < Fe-MEPE. Furthermore, a way is presented to adjust the average molar mass, chain-length and viscosity of MEPEs using the monotopic chain stopper 4’-(phenyl)-2,2’:6’,2’’-terpyridine. N2 - Verschiedene Übergangsmetallionen, wie Fe2+, Co2+, Ni2+ und Zn2+ komplexieren an den ditopen Liganden 1,4-Bis(2,2’:6’,2”-terpyridin-4’-yl)benzen. Aufgrund der hohen Bindungskonstanten, führt die metallinduzierte Selbstassemblierung von Fe2+, Co2+ und Ni2+ zu ausgedehnten, stäbchenförmigen metallosupramolekularen Polyelektrolyten (MEPE) in wässriger Lösung. In dieser Arbeit wird die Kinetik der Koordination sowie die Kinetik des Wachstums der MEPE aufgezeigt. Die Spezies in Lösung werden anhand von Stopped-flow-Fluoreszenzspektroskopie, Lichtstreuung, Viskosimetrie und Kryo-Transmittionselektronenmikroskopie analysiert. Bei nahezu stöchiometrischen Mengen der Reaktanden werden hohe molare Massen beobachtet. Dabei gilt: Ni-MEPE ~ Co-MEPE < Fe-MEPE. Außerdem wird ein Verfahren beschrieben, mit welchem die mittlere Molmasse, Kettenlänge und Viskosität der MEPE durch Nutzung des monotopen Kettenstoppers 4’-(Phenyl)-2,2’:6’,2’’-terpyridin eingestellt werden kann. KW - Supramolekulare Chemie KW - supramolecular chemistry KW - Polymere Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-160650 ER - TY - THES A1 - Ulbricht, Juliane T1 - Insights into Polymer Biodegradation - Investigations on oxidative, hydrolytic and enzymatic Pathways T1 - Einblicke in die Bioabbaubarkeit von Polymeren - Untersuchungen zu oxidativen, hydrolytischen und enzymatischen Abbauwegen N2 - The present work aims towards the investigation of polymer degradation under biologically relevant conditions. In order to assess a potential degradation of polymers of interest for biomedical applications in vivo and associated effects on living tissue, representatives of poly(2-oxazoline)s and polypeptoids as well as poly(ethylene glycol) and poly(N-vinylpyrrolidone) for reference purposes are examined regarding their stability under oxidative and hydrolytic conditions as well as towards enzymatic degradation. The polymers investigated in the framework of this thesis are generally considered to be non-biodegradable. Both poly(ethylene glycol) and poly(N-vinylpyrrolidone) are or were applied intensively in vivo provoking seriously harmful side effects like fatal blood poisoning from the oxidation of poly(ethylene glycol) chain ends or poly(N-vinylpyrrolidone) storage disease. Poly(2-alkyl-2-oxazoline)s and polypeptoids, both promising polymeric biomaterials for a wide variety of in vivo applications, are not clinically applied yet but undergo thorough investigations. However, comprising amide bonds within the backbone or the appending side chain, poly(2-alkyl-2-oxazoline)s and polypeptoids potentially offer a higher susceptibility towards (bio-)degradation. Representing the three most impactful initiators of degradation in vivo, the present study is focused on polymer deterioration by oxidative species, hydrolytic conditions and enzymes. Oxidative species are generated in a variety of processes in vivo, both on purpose and as an unintentional by-product. Previous investigations revealed the susceptibility of poly(ethylene glycol), poly(N-vinylpyrrolidone), poly(2-alkyl-2-oxazoline)s and polypeptoids to deterioration by hydroxyl radicals deriving from hydrogen peroxide and copper ions. The obtained data confirm previous results of an apparent degradation rate increasing with increasing chain length due to self-inhibitory end group effects for all investigated polymer species. Although the exact concentrations of oxidative species in vivo are very controversial, with respect to their great variety and wide distribution the investigated polymers are likely prone to oxidative deterioration to some extent, with rates, mechanisms and degradation products strongly depending on the respective reactive species, polymer structure and chain length. Like blood, most tissues of the human body benefit from a slightly alkaline pH value. Nevertheless, specific areas like the human stomach or tumor tissues possess acidic conditions potentially capable to cleave amide bonds comprised by poly(2-alkyl-2-oxazoline)s and polypeptoids. Unlike the hydrolysis of poly(2-alkyl-2-oxazoline)s resulting in side chain cleavage, the hydrolysis of polypeptoids induces backbone scission decreasing the polymer chain length tremendously and releasing, if performed exhaustively, the respective amino acids. Hydrolysis of polysarcosine is monitored by quantification of the released sarcosine via 1H-NMR spectroscopy and determination of the residual Mw via GPC. Its cyclic dimer sarcosine anhydride is formed as an intermediate product in this process via cyclization of unstable linear dimers of sarcosine. Modification and degradation of bio(macro)molecules is an essential part of human metabolism. Polymers bearing amide bonds and showing a great similarity to natural occurring and widely distributed polypeptides, like poly(2-alkyl-2-oxazoline)s and polypeptoids, bear the potential of an enzymatic biodegradability by (more or less specific) peptidases. Just like the acidic hydrolysis described previously, peptidase activity would result in the cleavage of polymer amide bonds. The aim of the present thesis was to evaluate the stability of poly(2-alkyl-2-oxazoline)s and polypeptoids as well as poly(ethylene glycol) for the sake of reference under circumstances resembling in vivo conditions as closely as possible. Initial experiments focused on the degradation of dye-labeled upon incubation with homogenates of freshly harvested rat liver and kidney. However, although the obtained results are promising for the most part, they are considered rather unreliable and non-reproducible for various reasons. More conclusive data are attained from the incubation of non-labeled polymers in freshly laid chicken eggs. While no evidence for an enzymatic digestion of poly(ethylene glycol) in chicken egg white is found and deterioration of poly(2-methyl-2-oxazoline) upon incubation apparently derives from non-enzymatic hydrolysis, incubated polysarcosine samples reveal distinct elugram patterns depending on the respective C- and N-terminal end groups indicating both exopeptidase and endopeptidase activity. It has to be kept in mind though, that an enzymatic digestibility of polysarcosine does not necessarily imply the digestion of polypeptoids bearing longer side chains by peptidases as well, which should be investigated in further studies. N2 - Die vorgestellte Arbeit befasst sich mit der Untersuchung des Abbauverhaltens von Polymeren unter biologisch relevanten Bedingungen. Vertreter der Poly(2-alkyl-2-oxazolin)e und Polypeptoide sowie Polyethylenglycol und Poly(N-vinylpyrrolidon) als Referenzpolymere werden im Hinblick auf ihre Stabilität unter oxidativen und hydrolytischen Bedingungen sowie gegen enzymatische Verdauung untersucht, um Rückschlüsse auf ihren potentiellen Abbau in vivo ziehen und die damit verbundenen Auswirkungen auf lebendes Gewebe abschätzen zu können. Poly(2-alkyl-2-oxazolin)e und Polypeptoide, zwei vielversprechende, jedoch noch wenig untersuchte Polymerklassen, sind als Biomaterialien für eine Vielzahl von in vivo Anwendungen interessant, werden aber bisher nicht kommerziell eingesetzt. Wie auch Polyethylenglycol und Poly(N-vinylpyrrolidon) werden Poly(2-alkyl-2-oxazolin)e und Polypeptoide als nicht bioabbaubar angesehen, was in Anbetracht der im Polymerrückgrat bzw. der davon abgehenden Seitenkette enthaltenen Amidbindungen kritisch zu hinterfragen ist. Reaktive Sauerstoff- und Stickstoffspezies werden in vivo in einer Vielzahl von Prozessen gezielt oder auch als unerwünschtes Nebenprodukt gebildet. Vorangegangene Untersuchungen konnten bereits die Anfälligkeit von Polyethylenglycol, Poly(N-vinylpyrrolidon), Poly(2-alkyl-2-oxazolin)en und Polypeptoiden für Modifikationen durch in situ durch Reaktion von Wasserstoffperoxid und Kupferionen gebildete Hydroxylradikale zeigen. Desweiteren wiesen die Resultate auf eine starke Abhängigkeit der scheinbaren Abbaurate von der Polymerkettenlänge hin. Die erhaltenen Daten bestätigen die früheren Ergebnisse zum Anstieg der scheinbaren Abbaurate mit steigender Kettenlänge durch selbstinhibitorische Endgruppeneffekte für alle untersuchten Polymerspezies. Die tatsächlichen Konzentrationen reaktiver Sauerstoffspezies in vivo werden kontrovers diskutiert, hinsichtlich ihrer großen Vielfalt und breiten Verteilung im Körper ist es jedoch durchaus wahrscheinlich, dass die untersuchten Polymere in vivo in unterschiedlichem Maße dem oxidativen Abbau unterliegen. Dabei sind nicht nur die Abbauraten, sondern auch der Mechanismus und die entsprechend gebildeten Abbauprodukte von der Art der reaktiven Spezies, der Polymerstruktur und der entsprechenden Kettenlänge abhängig. Blut und die meisten Gewebe des menschlichen Körpers sind auf einen leicht alkalischen pH-Wert angewiesen. Dennoch weisen spezifische Regionen wie den Magen oder Tumorgewebe ein saures Milieu auf, welches eventuell in der Lage ist, Amidbindungen, wie sie in Poly(2-alkyl-2-oxazolin)en und Polypeptoiden enthalten sind, zu spalten. Im Gegensatz zur Hydrolyse von Poly(2-alkyl-2-oxazolin)en, welche in Abspaltung der Seitenkette resultiert, kommt es bei der Hydrolyse von Polypeptoiden zur Spaltung des Polymerrückgrates, welche mit einer drastischen Verringerung der Kettenlänge und, mit fortschreitender Hydrolyse, mit der Freisetzung der entsprechenden Aminosäure einhergeht. Die Hydrolyse von Polysarkosin wird durch Quantifizierung des freigesetzten Sarkosins via 1H-NMR Spektroskopie sowie durch Bestimmung des Mw via GPC verfolgt. Dabei zeigt sich, dass sich das zyklische Dimer Sarkosinanhydrid als Zwischenprodukt der Hydrolyse durch Zyklisierung instabiler linearer Dimere bildet. Die Modifikation und der Abbau von Bio(makro)molekülen sind essentieller Bestandteil des menschlichen Metabolismus. Polymere, die wie die Poly(2-alkyl-2-oxazolin)e und Polypeptoide Amidbindungen und damit große Ähnlichkeit zu den natürlich vorkommenden und weit verbreiteten Polypeptiden aufweisen, bergen das Potential einer möglichen Bioabbaubarkeit durch Peptidasen. Ziel der vorliegenden Arbeit war die Evaluierung der Stabilität von Poly(2-alkyl-2-oxazolin)en und Polypeptoiden sowie Polyethylenglycol als Referenzpolymer ohne Amidbindungen unter Bedingungen, welche den in vivo vorliegenden Verhältnisse möglichst ähnlich sind. In ersten Experimenten liegt der Schwerpunkt auf der Inkubation Farbstoff-markierter Polymere in Homogenaten von frisch entnommenen Rattenlebern und -nieren. Obwohl die erhaltenen Ergebnisse zum Großteil vielversprechend sind, bestehen aus einer Vielzahl von Gründen Zweifel an ihrer Zuverlässigkeit und Reproduzierbarkeit. Die Inkubation von nicht marktierten Polymeren in frisch gelegten Hühnereiern liefert aussagekräftigere Ergebnisse. Es sind keine Hinweise auf einen enzymatischen Abbau von Polyethylenglycol in Hühnereiweiß ersichtlich. Abweichungen der Elugramme des Poly(2-methyl-2-oxazolin)s deuten auf eine Modifikation während der Inkubation hin, die jedoch vermutlich nicht enzymatischen Ursprungs ist. Im Gegensatz dazu zeigen die Polysarkosin-Proben in Abhängigkeit der entsprechenden C- und N-terminalen Gruppen charakteristische Elugrammmodifikationen, welche auf die Aktivität von Exo- und Endopeptidasen hindeuten. KW - Biologischer Abbau KW - Polymere KW - Bioabbaubarkeit KW - Polyethylenglycol KW - Polypeptoide KW - Poly(2-oxazolin)e KW - Biodegradability KW - Polyethylene glycol KW - Polypeptoids KW - Poly(2-oxazoline)s Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-158683 ER -