TY - THES A1 - Peethambaran Nair Syamala, Pradeep T1 - Bolaamphiphilic Rylene Bisimides: Thermodynamics of Self-assembly and Stimuli-responsive Properties in Water T1 - Bolaamphiphile Rylenebisimide: Thermodynamik der Selbstorganisation und Stimuli-responsiven Merkmale in Wasser N2 - The present thesis demonstrates how different thermodynamic aspects of self-assembly and stimuli-responsive properties in water can be encoded on the structure of π-amphiphiles, consisting of perylene or naphthalene bisimide cores. Initially, quantitative thermodynamic insights into the entropically-driven self-assembly was studied for a series of naphthalene bisimides with UV/Vis and ITC measurements, which demonstrated that their thermodynamic profile of aggregation is heavily influenced by the OEG side chains. Subsequently, a control over the bifurcated thermal response of entropically driven and commonly observed enthalpically driven self-assembly was achieved by the modulation of glycol chain orientation. Finally, Lower Critical Solution Temperature (LCST) phenomenon observed for these dyes was investigated as a precise control of this behavior is quintessential for self-assembly studies as well as to generate ‘smart’ materials. It could be shown that the onset of phase separation for these molecules can be encoded in their imide substituents, and they are primarily determined by the supramolecular packing, rather than the hydrophobicity of individual monomers. N2 - Die vorliegende Arbeit zeigt, wie verschiedene thermodynamische Aspekte der Selbstorganisation sowie die Stimuli-responsiven Merkmale in Wasser mittels der Struktur von π-Amphiphilen mit Perylen- oder Naphthalinbisimidkernen programmiert werden können. Zunächst wurden quantitative thermodynamische Einblicke in die entropisch getriebene Selbstorganisation für eine Reihe von Naphthalinbisimiden mit UV / Vis- und ITC-Messungen untersucht. Diese zeigten, dass ihr thermodynamisches Aggregationsprofil stark von den Oligoethylenglykol-Seitenketten beeinflusst wird. Anschließend wurde durch gezielte Modulation der Glykolketten und der daraus resultierenden Neuorientierung der Ketten, eine Kontrolle über die Thermodynamik der Selbstassemblierung zwischen der häufiger beobachtbaren enthalpisch getriebenen und der entropisch getriebenen Selbstorganisation erreicht. Schließlich wurde das für diese Farbstoffe beobachtete Phänomen der niedrigeren kritischen Lösungstemperatur (LCST) untersucht, da eine genaue Kontrolle dieses Verhaltens für Selbstorganisationsstudien sowie für die Erzeugung „intelligenter“ Materialien von entscheidender Bedeutung ist. Es konnte gezeigt werden, dass der Beginn der Phasentrennung für diese Moleküle von ihren Imidsubstituenten und hauptsächlich durch die supramolekulare Packung bestimmt werden und nicht durch die Hydrophobie einzelner Monomere. KW - Supramolekulare Chemie KW - Aggregation KW - Selbstorganisation KW - Wasser KW - Supramolecular Chemistry KW - Thermodynamics KW - Self-assembly KW - Lower Critical Solution Temperature (LCST) KW - Water KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213424 ER - TY - THES A1 - Hecht, Markus T1 - Liquid-Crystalline Perylene Bisimide and Diketopyrrolopyrrole Assemblies T1 - Flüssigkristalline Perylenbisimid- und Diketopyrrolopyrrolstrukturen N2 - The research presented in this thesis illustrates that self-assembly of organic molecules guided by intermolecular forces is a versatile bottom-up approach towards functional materials. Through the specific design of the monomers, supramolecular architectures with distinct spatial arrangement of the individual building blocks can be realized. Particularly intriguing materials can be achieved when applying the supramolecular approach to molecules forming liquid-crystalline phases as these arrange in ordered, yet mobile structures. Therefore, they exhibit anisotropic properties on a macroscopic level. It is pivotal to precisely control the interchromophoric arrangement as functions originate in the complex structures that are formed upon self-assembly. Consequently, the aim of this thesis was the synthesis and characterization of liquid-crystalline phases with defined supramolecular arrangements as well as the investigation of the structure-property relationship. For this purpose, perylene bisimide and diketopyrrolopyrrole chromophores were used as they constitute ideal building blocks towards functional supramolecular materials due to their thermal stability, lightfastness, as well as excellent optical and electronic features desirable for the application in, e.g., organic electronics. N2 - Mithilfe von Gestaltungsprinzipien der supramolekularen Chemie können komplexe Strukturen realisiert werden, die mit Ansätzen der kovalenten Chemie nicht erreichbar sind. Ein zentraler Aspekt ist hierbei der systematische Aufbau der Monomereinheiten, welche unter geeigneten Bedingungen über intermolekulare Wechselwirkungen selbstassemblieren und Architekturen mit spezifischer räumlicher Anordnung der einzelnen Bauelemente formen. Flüssigkristalline Materialien zeigen zusätzlich zu positioneller und Orientierungsfernordnung der Moleküle, welche anisotrope Eigenschaften auf makroskopischer Ebene erzeugen, eine gewisse Mobilität. Daher können durch Kombination des supramolekularen Ansatzes mit Flüssigkristallen besonders interessante Materialien erzeugt werden. Da die spezische Anordnung der Moleküle die Funktion des selbstassemblierten Materials stark beeinflusst, ist es von großer Bedeutung, diese exakt kontrollieren zu können. Daher war es Ziel dieser Arbeit, flüssigkristalline Phasen mit einer definierten supramolekularen Struktur zu synthetisieren und zu charakterisieren. Weiterhin war es ein Ziel, diese auf ihre funktionellen Eigenschaften zu untersuchen, die aus der spezifischen Anordnung der Monomereinheiten hervorgehen. Für diesen Zweck wurden Perylenbisimid- und Diketopyrrolopyrrolfarbstoffe als Baueinheiten verwendet, da diese aufgrund ihrer Licht- und Hitzestabilität sowie exzellenten optischen und elektronischen Eigenschaften ideale Materialien für die Anwendung in der organischen Elektronik darstellen. KW - Selbstorganisation KW - Flüssigkristall KW - Perylenderivate KW - Perylene Bisimide KW - Liquid Crystal KW - J-Aggregates KW - Photoconductivity KW - Self-Assembly KW - Perylenbisimid Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-216987 ER - TY - THES A1 - Shen, Chia-An T1 - Dicyanomethylene Squaraines: Aggregation and G-Quadruplex Complexation T1 - Dicyanomethylen-Squaraine: Aggregation und G-Quadruplex-Komplexierung N2 - Squaraine dyes have attracted more attention in the past decade due to their strong and narrow absorption and fluorescence along with the easily functionalized molecular structure. One successful approach of core functionalization is to replace one oxygen of the squaric carbonyl group with a dicyanomethylene group, which shifts the absorption and emission into the near infrared (NIR) region and at the same time leads to a rigid, planar structure with C2v symmetry. However, such squaraines tend to aggregate cofacially in solution due to dispersion forces and dipole-dipole interactions, usually leading to H-type exciton coupling with undesired blue-shifted spectrum and quenched fluorescence. Therefore, the goal of my research was the design of dicyanomethylene-substituted squaraine dyes that self-assemble into extended aggregates in solution with J-type coupling, in order to retain or even enhance their outstanding optical properties. Toward this goal, bis(squaraine) dyes were envisioned with two squaraine units covalently linked to trigger a slip-stacked packing motif within the aggregates to enable J-type coupling. In my first project, bis(squaraine) dye BisSQ1 was synthesized, in which two dicyanomethylene squaraine chromophores are covalently linked. Concentration and temperature-dependent UV/Vis/NIR spectroscopy experiments reveal that BisSQ1 undergoes cooperative self-assembly resulting in J-type aggregates in a solvent mixture of toluene/1,1,2,2-tetrachloroethane (TCE) (98:2, v/v). The J type exciton coupling is evident from the significantly red shifted absorption maximum at 886 nm and the fluorescence peak at 904 nm. In conclusion, this was a first example to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by simply connecting two dyes in a head-to-tail bis chromophore structure. Connecting two squaraine dyes with an additional phenylene spacer (BisSQ2) leads to two different polymorphs with very distinct absorption spectra upon cooling down a solution of BisSQ2 in a solvent mixture of toluene/TCE (98:2, v/v) with different rates. Accordingly, rapid cooling resulted in rigid helical nanorods with an absorption spectrum showing a panchromatic feature, while slow cooling led to a sheet-like structure with a significant bathochromic shift in the absorption spectrum. It was discovered that the conventional molecular exciton model failed to explain the panchromatic absorption features of the nanorods for the given packing arrangement, therefore more profound theoretical investigations based on the Essential States Model (ESM) were applied to unveil the importance of intermolecular charge transfer (ICT) to adequately describe the panchromatic absorption spectrum. Moreover, the red-shift observed in the spectrum for the sheet-like structure can be assigned to the interplay of Coulomb coupling and ICT-mediated coupling. Furthermore, the same bis-chromophore strategy was adopted for constructing an NIR-II emitter with a bathochromically-shifted spectrum. In chloroform, BisSQ3 exhibits an absorption maximum at 961 nm with a significant bathochromic shift (1020 cm−1) compared to the reference mono-squaraine SQ, indicating intramolecular J-type coupling via head-to-tail arrangement of two squaraine dyes. Moreover, BisSQ3 shows a fluorescence peak at 971 nm with a decent quantum yield of 0.33%. In less polar toluene, BisSQ3 self-assembles into nanofibers with additional intermolecular J-type coupling, causing a pronounced bathochromic shift with absorption maximum at 1095 nm and a fluorescence peak at 1116 nm. Thus, connecting two quinoline-based squaraines in a head-to-tail fashion leads to not only intra-, but also intermolecular J-type exciton coupling, which serves as a promising strategy to shift the absorption and emission of organic fluorophores into the NIR-II window while retaining decent quantum yields. In conclusion, my research illustrates based on squaraine dyes how a simple modification of the molecular structure can significantly affect the aggregation behavior and further alter the optical properties of dye aggregates. Elongated supramolecular structures based on dicyanomethylene substituted squaraine dyes were successfully established by covalently linking two squaraine units to form a bis-chromophore structure. Then, a simple but efficient general approach was established to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by directly connecting two squaraine dyes in a head-to-tail fashion without spacer units. Moreover, the additional spacer between the squaraine dyes in BisSQ2 allowed different molecular conformations, which leads to two different morphologies depending on the cooling rates for a hot solution. Hence, this is a promising strategy to realize supramolecular polymorphism. In general, it is expected that the concept of constructing J-aggregates by the bis-chromophore approach can be extended to entirely different classes of dyes since J-aggregates possess a variety of features such as spectral shifts into the NIR window, fluorescence enhancement, and light harvesting, which are commonly observed and utilized for numerous fundamental studies and applications. Moreover, the insights on short-range charge transfer coupling for squaraine dyes is considered of relevance for all materials based on alternating donor-acceptor π-systems. The panchromatic spectral feature is in particular crucial for acceptor-donor-acceptor (ADA) dyes, which are currently considered as very promising materials for the development of bulk heterojunction solar cells. N2 - Squarainfarbstoffe haben in den letzten Jahren aufgrund ihrer hervorragenden optischen Eigenschaften, zu denen ein Cyanin-ähnliches Absorptions- und Fluoreszenzverhalten zählt, in Kombination mit einer leicht funktionalisierbaren Molekülstruktur immer mehr Aufmerksamkeit auf sich gezogen.22 Ein erfolgreicher Ansatz der Kernfunktionalisierung besteht darin, ein Sauerstoffatom der Quadratsäure-Carbonylgruppe durch eine Dicyanomethyleneinheit zu ersetzen, was die Absorption und Emission in den nahen infraroten (NIR-) Bereich verschiebt und gleichzeitig zu einer starren planaren Struktur mit C2v Symmetrie und einem Grundzustandsdipolmoment führt.27 Diese Eigenschaften haben sich als vorteilhaft für die π-π-Aggregation von diesen Squarainen auf G-Quadruplex (G4) Strukturen erwiesen, wie in Kapitel 6 beschrieben. Solche Squaraine neigen jedoch zur Bildung von Dimeren oder kleinen Aggregaten in Lösung mit kofazialen Chromophoranordnungen aufgrund Dispersionskräften und Dipol-Dipol-Wechselwirkungen. Dies resultiert in der Regel zu einer H-artigen exzitonischen Kopplung mit unerwünschten, blauverschobenen Absorptionsbanden und gelöschter Fluoreszenz.28 Daher war das Ziel dieser Dissertation, Dicyanomethylen-substituierte Squarainfarbstoffe zu entwickeln, die sich in Lösung zu verlängerten Aggregaten mit J-artiger Kopplung selbst organisieren. Auf diese Weise sollten die ausgezeichneten optischen Eigenschaften der Squarainfarbstoffe erhalten oder sogar verbessert werden. Zu diesem Zweck, wurden Bis(squarain)-Farbstoffe synthetisiert, in denen zwei Squarain-Einheiten kovalent verbunden sind, was zu einer gestapelten Anordnung mit longitudinalem Versatz innerhalb der Aggregate und damit zu einer J-artigen Kopplung führt. ... KW - Squaraine KW - Selbstorganisation KW - Farbstoff KW - Supramolekulare Chemie KW - Quadruplex-DNS KW - Self-assembly KW - Aggregation KW - exciton coupling KW - cooperative KW - spectroscopy Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-243599 ER - TY - THES A1 - Sapotta, Meike T1 - Perylene Bisimide Cyclophanes: Recognition of Alkaloids, Aggregation Behavior in Aqueous Environment and Guest-Mediated Chirality Transfer T1 - Perylenbisimidcyclophane: Alkaloiderkennung, Aggregationsverhalten in wässriger Umgebung und gastvermittelter Chiralitätstransfer N2 - Inspired by the fact that sufficient solubility in aqueous media can be achieved by functional substitution of perylene bisimides (PBIs) with polar groups, one of the essential aims of this thesis was the design and successful synthesis of the new water-soluble PBI cyclophanes [2PBI]-1m and [2PBI]-1p, which are appended with branched, hydrophilic oligoethylene glycol (OEG) chains. Subsequently, the focus was set on the elucidation of properties of PBI cyclophane hosts which are also of relevance for recognition processes in biological systems. The performance of the new amphiphilic PBI cyclophane [2PBI]-1p as synthetic receptors for various natural aromatic alkaloids in aqueous media was thoroughly investigated. Alkaloids represent a prominent class of ubiquitous nitrogen containing natural compounds with a great structural variety and diverse biological activity. As of yet, no chromophore host acting as a molecular probe for a range of alkaloids such as harmine or harmaline is known. In addition, the self-association behavior of cyclophane host [2PBI]-1m and its reference monomer in water was studied in order to gain insights into the thermodynamic driving forces affecting the self-assembly process of these two PBI systems in aqueous environment. Moreover, the chirality transfer upon guest binding previously observed for a PBI cyclophane was investigated further. The assignment of the underlying mechanism of guest recognition to either the induced fit or conformational selection model was of particular interest. N2 - Diese Arbeit befasste sich mit der Erforschung neuer Eigenschaften von Perylenbisimid-cyclophanwirten, zum Beispiel der Gast-Komplexierung in wässriger Umgebung (Kapitel 3.2) oder dem Einfluss von Wasser beim Selbstassemblierungsprozess einer dieser Wirte in Wasser (Kapitel 3.3). Weiterhin wurden der Chiralitätstransfer durch Gasterkennung und das der Wirt-Gast-Komplexbildung zugrunde liegende mechanistische Modell untersucht (Kapitel 3.4). ... KW - Supramolekulare Chemie KW - Perylenderivate KW - Wirt-Gast-Beziehung KW - Host-Guest-Chemistry KW - Self-Assembly in Water KW - Chirality Transfer KW - Chiralität KW - Selbstorganisation KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200028 ER - TY - THES A1 - Kirchner, Eva T1 - Discrete Supramolecular Stacks by Self-Assembly and Folding of Bis(merocyanine) Dyes T1 - Definierte supramolekulare Stapel durch Selbstassemblierung und Faltung von Bis(merocyanin)-Farbstoffen N2 - The present thesis describes the development of a strategy to create discrete finite-sized supramolecular stacks of merocyanine dyes. Thus, bichromophoric stacks of two identical or different chromophores could be realized by folding of bis(merocyanine) dyes and their optical properties were discussed in terms of exciton theory. Quantum chemical calculations revealed strong exciton coupling between the chromophores within the homo- and hetero-π-stacks and the increase of the J-band of the hetero-dimers with increasing energy difference between the excited states of the chromophores could be attributed not only to the different magnitudes of transition dipole moments of the chromophores but also to the increased localization of the excitation in the respective exciton state. Furthermore, careful selection of the length of the spacer unit that defines the interplanar distance between the tethered chromophores directed the self-assembly of the respective bis(merocyanines) into dimers, trimers and tetramers comprising large, structurally precise π-stacks of four, six or eight merocyanine chromophores. It could be demonstrated that the structure of such large supramolecular architectures can be adequately elucidated by commonly accessible analysis tools, in particular NMR techniques in combination with UV/vis measurements and mass spectrometry. Supported by TDDFT calculations, the absorption spectra of the herein investigated aggregates could be explained and a relationship between the absorption properties and the number of stacking chromophores could be established based on exciton theory. N2 - Die vorliegende Arbeit beschreibt die Entwicklung einer Strategie zur Herstellung definierter supramolekularer Stapel aus Merocyaninfarbstoffen. So konnten Dimere bestehend aus zwei identischen oder unterschiedlichen Chromophoren durch Faltung von Bis(merocyanin)-Farbstoffen realisiert und ihre optischen Eigenschaften anhand von Exzitonentheorie diskutiert werden. Quantenchemische Rechnungen ergaben eine starke Exzitonenkopplung sowohl zwischen gleichartigen, als auch zwischen energetisch unterschiedlichen Merocyaninfarbstoffen und der Anstieg der J-Bande der Heterodimere mit zunehmender Energiedifferenz zwischen den angeregten Zuständen der Chromophore konnte nicht nur der unterschiedlichen Größe der Übergangsdipolmomente der Chromophore, sondern auch der zunehmenden Lokalisation der Anregung im jeweiligen Exzitonenzustand zugeschrieben werden. Darüber hinaus führte die sorgfältige Auswahl der Länge der Linkereinheit, welche den interplanaren Abstand zwischen den beiden Chromophoren im Bis(merocyanin) definiert, zur Selbstassemblierung zu Dimeren, Trimeren und Tetrameren, welche definierte π-Stapel bestehend aus vier, sechs oder acht Merocyaninchromophoren umfassen. Es konnte gezeigt werden, dass die Struktur solch großer supramolekularer Architekturen mittels allgemein zugänglicher Analyseverfahren, insbesondere der NMR-Technik in Kombination mit UV/vis-Messungen und Massenspektrometrie, aufgeklärt werden kann. Anhand der so etablierten Modellsysteme konnten schließlich die Absorptionseigenschaften definierter π-Stapel diskutiert und ein Zusammenhang mit der Anzahl der gestapelten Chromophore hergestellt werden. KW - Merocyanine KW - Exziton KW - Supramolekulare Struktur KW - Selbstorganisation KW - Merocyanine dyes KW - Exciton coupling KW - Supramolecular aggregates KW - Self-assembly KW - Exzitonenkopplung KW - Supramolekulare Aggregate KW - Selbstassemblierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159419 ER - TY - THES A1 - Kaufmann, Christina T1 - Discrete Supramolecular Architectures of Bay-linked Perylene Bisimide Dimers by Self-Assembly and Folding T1 - Diskrete supramolekulare Architekturen bucht-verknüpfter Perylenbisimid Dimere durch Selbstassemblierung und Faltung N2 - Supramolecular self-assembly of perylene bisimide (PBI) dyes via non-covalent forces gives rise to a high number of different PBI architectures with unique optical and functional properties. As these properties can be drastically influenced by only slightly structural changes of the formed supramolecular ensembles (Chapter 2.1) the controlled self-assembly of PBI dyes became a central point of current research to design innovative materials with a high potential for different applications as for example in the fields of organic electronics or photovoltaics. As PBI dyes show a strong tendency to form infinite aggregated structures (Chapter 2.2) the aim of this thesis was to precisely control their self-assembly to create small, structurally well-defined PBI assemblies in solution. Chapter 2.3 provides an overview on literature known strategies that were established to realize this aim. It could be demonstrated that especially backbone-directed intra- and intermolecular self-assembly of covalently linked Bis-PBI dyes evolved as one of the most used strategies to define the number of stacked PBI chromophores by using careful designed spacer units with regard to their length and flexibility. By using conventional spectroscopic methods like UV/Vis and fluorescence experiments in combination with NMR measurements an in-depth comparison of the molecular and optical properties in solution both in the non-stacked and aggregated state of the target compounds could be elucidated to reveal structure-property relationships of different PBI architectures. Thus, it could be demonstrated, that spacer units that pre-organize two PBI chromophores with an inter-planar distance of r < 7 Å lead to an intramolecular folding, whereas linker moieties with a length between 7 to 11 Å result in an intermolecular self-assembly of the respective Bis-PBIs dyes via dimerization to form well-defined quadruple PBI pi-stacks. Hence, if the used spacer units ensure an inter-planar distance r > 14 Å larger oligomeric PBI pi-stacks are generated. In Chapter 4 a detailed analysis of the exciton coupling in a highly defined H-aggregate quadruple PBI pi-stack is presented. Therefore, bay-tethered PBI dye Bis-PBI 1 was investigated by concentration-dependent UV/Vis spectroscopy in THF and toluene as well as by 2D-DOSY-NMR spectroscopy, ESI mass spectrometry and AFM measurements confirming that Bis-PBI 1 self-assembles exclusively into dimers with four closely pi-stacked PBI chromophores. Furthermore, with the aid of broadband fluorescence upconversion spectroscopy (FLUPS) ensuring broadband detection range and ultrafast time resolution at once, ultrafast Frenkel exciton relaxation and excimer formation dynamics in the PBI quadruple pi-stack within 1 ps was successfully investigated in cooperation with the group of Dongho Kim. Thus, it was possible to gain for the first time insights into the exciton dynamics within a highly defined synthetic dye aggregate beyond dimers. By analysing the vibronic line shape in the early-time transient fluorescence spectra in detail, it could be demonstrated that the Frenkel exciton is entirely delocalized along the quadruple stack after photoexcitation and immediately loses its coherence followed by the formation of the excimer state. In Chapter 5 four well-defined Bis-PBI folda-dimers Bis-PBIs 2-4 were introduced, where linker units of different length (r < 7 Å) and steric demand were used to gain distinct PBI dye assemblies in the folded state. Structural elucidation based on in-depth UV/Vis, CD and fluorescence experiments in combination with 1D and 2D NMR studies reveals a stacking of the two PBI chromophores upon folding, where geometry-optimized structures obtained from DFT calculations suggest only slightly different arrangements of the PBI units enforced by the distinct spacer moieties. With the resulting optical signatures of Bis-PBIs 2-4 ranging from conventional Hj-type to monomer like absorption features, the first experimental proof of a PBI-based “null-aggregate” could be presented, in which long- and short-range exciton coupling fully compensate each other. Hence, the insights of this chapter pinpoint the importance of charge-transfer mediated short-range exciton coupling that can significantly influence the properties of pi-stacked PBI chromophores In the last part of this thesis (Chapter 6), spacer-controlled self-assembly of four bay-linked Bis-PBI dyes Bis-PBIs 5-8 into well-defined supramolecular architectures was investigated, where the final aggregate structures are substantially defined by the nature of the used spacer units. By systematically extending the backbone length from 7 to 15 Å defining the inter-planar distance between the tethered chromophores, different assemblies from defined quadruple PBI pi-stacks to larger oligomeric pi-stacks could be gained upon aggregation. In conclusion, the synthesis of nine covalently linked PBI dyes in combination with a detailed investigation of their spacer-mediated self-assembly behaviour in solution concerning structure-properties-relationships was presented within this thesis. The results confirm a strong exciton coupling in different types of Bis-PBI architectures e.g. folda-dimers or highly defined quadruple pi-stacks, which significantly influences their optical properties upon self-assembly. N2 - Supramolekulare Selbstorganisationsprozesse von Perylenbisimid-(PBI)-Farbstoffen über nichtkovalente Kräfte führen zu einer Vielzahl unterschiedlicher PBI-Aggregatstrukturen welche sich in ihren einzigartigen optischen und funktionellen Eigenschaften unterscheiden. Diese Eigenschaften können bereits durch leichte strukturelle Veränderungen der gebildeten supramolekularen Strukturen drastisch beeinflusst werden (Kapitel 2.1), was die kontrollierte Selbstassemblierung von PBI-Farbstoffen zu einem zentralen Punkt aktueller Forschungsarbeiten macht. Dadurch soll es ermöglicht werden, innovative Materialien zu generieren, welche ein hohes Potenzial für unterschiedlichste Anwendungen aufzeigen, wie z.B. im Bereich der organischen Elektronik oder Photovoltaik. Da PBI-Farbstoffe eine starke Tendenz zur Bildung ausgedehnter Aggregatstrukturen aufweisen (Kapitel 2.2), war das Ziel dieser Arbeit, kleine, hoch-definierte PBI-Stapel zu generieren, was über die kontrollierte Steuerung ihres Aggregationsverhaltens ermöglicht werden sollte. Kapitel 2.3 gibt dabei einen Überblick über die hierfür in der Literatur verwendeten Strategien. Dabei konnte gezeigt werden, dass vor allem eine intra- bzw. intermolekulare Organisation von kovalent-verknüpften Bis-PBI-Farbstoffen herangezogen wird, um die Anzahl der PBI-Chromophore innerhalb des Aggregates zu limitieren. Dies konnte unter anderem durch eine sorgfältige Auswahl der verwendeten Linker-Einheiten realisiert werden, vor allem hinsichtlich ihrer Länge und Flexibilität. Durch den Einsatz von UV/Vis-, Fluoreszenz- und NMR-Spektroskopie kann ein eingehender Vergleich der molekularen und optischen Eigenschaften der Farbstoffe in Lösung sowohl im monomeren als auch im aggregierten Zustand durchgeführt werden. So konnte gezeigt werden, dass Linker-Einheiten, welche zwei PBI-Chromophore mit einem interplanaren Abstand von r < 7 Å vororganisieren, zu einer intramolekularen Faltung der Bis-PBI-Farbstoffe führen, wohingegen Linker-Einheiten mit einer Länge zwischen 7 - 11 Å eine intermolekulare Selbstorganisation der jeweiligen Bis-PBI-Farbstoffe begünstigen. Gewährleistet die verwendete Linker-Einheit einen interplanaren Abstand r > 14 Å zwischen den beiden PBI-Einheiten, so kommt es zur Erzeugung größerer, oligomerer PBI-Farbstoff-Stapel. Im ersten Teil dieser Arbeit (Kapitel 4) wurde die Exzitonen-Kopplung in einem hochdefinierten PBI-Viererstapel untersucht. Zu diesem Zweck wurde Bis-PBI 1 synthetisiert, dessen Aggregationsverhalten anschließend mittels konzentrationsabhängiger UV/Vis-Spektroskopie in THF und Toluol sowie mittels 2D-DOSY-NMR-Spektroskopie, ESI-Massenspektrometrie und AFM-Messungen ermittelt werden konnte. Dadurch konnte die intermolekulare Dimerisierung von Bis-PBI 1 und damit die Ausbildung hoch-definierter PBI-Viererstapel nach erfolgter Aggregation bestätigt werden. In Zusammenarbeit mit der Gruppe von Dongho Kim konnten weiterhin mittels Femtosekunden-Breitband-Fluoreszenz-Aufkonversions-Spektroskopie (FLUPS) erstmals Einblicke in die Exzitonendynamik innerhalb eines hoch definierten synthetischen Farbstoffaggregats jenseits von Dimeren gewonnen werden. Durch die detaillierte Analyse der vibronischen Linienform der frühen transienten Fluoreszenzspektren konnte gezeigt werden, dass das anfänglich gebildete Frenkel-Exciton nach erfolgter Anregung vollständig entlang des gesamten Viererstaples delokalisiert ist. Der eindeutige Nachweis des initialen, vollständig delokalisierten Frenkel-Exziton-Zustandes und seiner Lokalisation, stellen wichtige Ergebnisse dieser Studie dar Der zweite Teil dieser Arbeit (Kapitel 5) befasste sich mit der Einführung von vier hoch-definierten Bis-PBI-Folda-Dimeren Bis-PBI 2-4, für deren Synthese Linker-Einheiten unterschiedlicher Länge (r < 7 Å) und Flexibilität verwendet wurden. So konnte jeweils eine leicht variierende Anordnung der PBI-Chromophore im gefalteten Zustand generiert werden. Durch die Strukturaufklärung auf Basis von eingehenden UV/Vis-, CD-, Fluoreszenz- und 1D- und 2D-NMR-Studien konnte für alle Farbstoffe Bis-PBIs 2-4 die Faltung zu diskreten pi-Stapeln gezeigt werden. Die aus DFT-Berechnungen gewonnenen geometrieoptimierten Strukturen lassen nur geringfügig unterschiedliche Anordnungen der PBI-Farnstoffe erkennen, welche durch die verschiedenen Linker-Einheiten verursacht werden. Durch die resultierenden optischen Signaturen der Folda-Dimere Bis-PBIs 2-4, welche vom konventionellen Hj-Aggregat bis hin zu monomerenähnlichen Absorptionsmerkmalen reichen, konnte erstmals der experimentelle Nachweis eines PBI-basierten "Null-Aggregats" erbracht werden, bei dem sich JCoul und JCT vollständig gegenseitig kompensieren. Die Erkenntnisse dieses Kapitels verdeutlichen daher den erheblichen Einfluss der sogenannte kurzreichweitigen Exzitonen-Kopplung JCT auf die optischen Eigenschaften von PBI-Aggregaten. Im letzten Teil dieser Arbeit (Kapitel 6) wurden die Selbstorganisationsprozesse in klar definierten supramolekularen Aggregatstrukturen untersucht. Durch die systematische Verlängerung der Linker-Einheiten von 7 auf 15 Å, konnten durch Selbstorganisation unterschiedliche Aggregatstrukturen von hochdefinierten PBI-Viererstapeln bis hin zu längeren PBI-Oligomeren generiert werden. Zusammenfassend wurde in dieser Arbeit eine detaillierte Übersicht des Selbstorganisationsverhaltens von neun kovalent verknüpften Bis-PBI-Farbstoffen vorgestellt, welche anschließend hinsichtlich ihrer Struktur-Eigenschafts-Beziehung untersucht wurden. Die Ergebnisse bestätigen eine starke Excitonen-Kopplung in verschiedenen Bis-PBI-Aggregaten wie z.B. PBI-Folda-Dimeren oder hochdefinierten PBI-Viererstapeln, welche die optischen Eigenschaften der Farbstoffsysteme im aggregierten Zustand signifikant beeinflusst. KW - Supramolekulare Chemie KW - Perylenderivate KW - Selbstorganisation KW - perylene bisimide dimers KW - folda-dimer KW - null-aggregate KW - exciton dynamics KW - short-range JCT-coupling KW - spacer-controlled self-assembly KW - Elektronentransfer KW - Farbstoff KW - NMR-Spektroskopie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173005 ER - TY - THES A1 - Dhara, Ayan T1 - Stimuli-Responsive Self-Assembly and Spatial Functionalization of Organic Cages Based on Tribenzotriquinacenes T1 - Stimuli-responsive Selbstorganisation und räumliche Funktionalisierung organischer Käfige auf Basis von Tribenzotriquinacenen N2 - Within this thesis, synthetic strategies for self-assembled organic cage compounds have been developed that allow for both stimuli-responsive control over assembly/disassembly processes and spatial control over functionalization. To purposefully operate the reversible assembly of organic cages, boron-nitrogen dative bonds have been exploited for the formation of a well-defined, discrete bipyramidal organic assembly in solution. Thermodynamic association equilibria for cage formation have been investigated by Isothermal Titration Calorimetry (ITC). Temperature-dependent NMR studies revealed a reversible cage opening upon heating and quantitative reassembly upon cooling. For the spatial functionalization of organic cages, two divergent molecular building units have been designed and synthesized, namely tribenzotriquinacene derivatives possessing a terminal alkyne moiety at the apical position and a meta-diboronic acid having a pyridyl group at the 2-position. Facile access to a variety of apically functionalized tribenzotriquinacenes has been illustrated by post-synthetic modifications at the terminal alkyne group by Sonogashira cross-coupling and azide-alkyne click reactions. Finally, these apically functionalized tribenzotriquinacene building blocks have been implemented into boronate ester-based organic cage compounds showing modular exohedral functionalities. N2 - Im Rahmen dieser Dissertation wurden Synthesiestrategien für selbstorganisierte organische Käfigstrukturen entwickelt, die eine stimuli-responsive Kontrolle über den Auf- und Abbau sowie eine räumliche Kontrolle über die Funktionalisierung dieser Nanostrukturen erlauben. Um den Assemblierungsprozess organischer Käfige gezielt zu steuern, wurden dative Bor-Stickstoff-Bindungen für die Bildung eines wohldefinierten, diskreten, bipyramidalen organischen Käfigs in Lösung eingesetzt. Die thermodynamischen Assoziationsleichgewichte für die Käfigbildung wurden durch isotherme Titrationskalorimetrie (ITC) tersucht. Temperaturabhängige NMR-Studien zeigten eine reversible Käfigöffnung beim Erwärmen und die quantitative Wiedergewinnung des Käfigs beim Abkühlen. Für die räumliche Funktionalisierung organischer Käfige wurden zwei divergente molekulare Bausteine entworfen und synthetisiert: Zum Einen Tribenzotriquinacen-Derivate die eine terminale Alkinfunktion an der apikalen Position aufweisen und zum Anderen eine meta-Diboronsäure mit einer Pyridylgruppe in 2-Position. Der einfache Zugang zu einer Vielzahl an apikal funktionalisierten Tribenzotriquinacenen wurde durch postsynthetische Modifizierungen der terminalen Alkineinheit durch Sonogashira-Kreuzkupplungen und Azid-Alkin-Klick-Reaktionen veranschaulicht. Schließlich wurden diese apikal funktionalisierten Tribenzotriquinacen-Bausteine in organische Boronatester-Käfige mit modularer exohedraler Funktionalität implementiert. KW - Selbstorganisation KW - Bor-Stickstoff-Verbindungen KW - Käfigverbindungen KW - Self-assembly KW - Selbstassemblierung KW - Cage KW - Boron-Nitrogen Dative Bond Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154762 ER - TY - THES A1 - Rehm, Stefanie T1 - Spermine-functionalized Perylene Bisimide Dyes: Synthesis and Self-assembly in Water T1 - Spermin-funktionalisierte Perylenbisimid Farbstoffe: Synthese und Selbstassemblierung in Wasser N2 - The main objective of this thesis was the design and synthesis of perylene bisimide dyes with sufficient water-solubility for the construction of self-assembled architectures in aqueous solutions. Beside these tasks another goal of this project was the control over the self-assembly process in terms of aggregate size and helicity, respectively. Within this thesis an appropriate synthesis for spermine-functionalized perylene bisimide dyes was developed and conducted successfully. The characterization of these building blocks and their course of self-assembly were investigated by NMR, UV/Vis and fluorescence spectroscopy as well as by atomic force and transmission electron microscopy. For the better understanding of the experimental results theoretical calculations were performed. N2 - Ziel dieser Dissertation war das Design und die Synthese von Perylenbisimiden mit hinreichender Wasserlöslichkeit, die für den Aufbau von selbständig assemblierten Strukturen in wässrigen Lösungen verwendet werden sollen. Ein weiteres Ziel dieses Projektes war die Kontrolle über den Prozess der Selbstanordnung hinsichtlich der Aggregatgröße beziehungsweise deren Helizität. Im Rahmen dieser Doktorarbeit wurde eine entsprechende Synthese für Spermin-funktionalisierte Perylenbisimide entworfen und erfolgreich durchgeführt. Die Charakterisierung dieser Bausteine und der Prozess deren Selbstanordnung wurde mit Hilfe von NMR-, UV/Vis- und Fluoreszenz-Spektroskopie aber auch mit Rasterkraft- und Elektronentransmissionsmikroskopie durchgeführt. Für das bessere Verständnis der experimentellen Ergebnisse wurden theoretische Berechnungen durchgeführt. KW - Perylenderivate KW - Selbstorganisation KW - perylene bisimide KW - spermine KW - polyamine KW - bola-amphiphile KW - fluorescence KW - Perylenbisimid KW - Spermin KW - Polyamin KW - Bola-Amphiphil KW - Fluoreszenz KW - Aggregation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123201 ER - TY - THES A1 - Rest, Christina T1 - Self-assembly of amphiphilic oligo(phenylene ethynylene)-based (bi)pyridine ligands and their Pt(II) and Pd(II) complexes T1 - Selbstorganisation von amphiphilen oligo(phenylenethinylen)-basierten (Bi)pyridin-Liganden und ihrer Pt(II) und Pd(II) Komplexe N2 - The presented work in the field of supramolecular chemistry describes the synthesis and detailed investigation of (bi)pyridine-based oligo(phenylene ethynylene) (OPE) amphiphiles, decorated with terminal glycol chains. The metal-ligating property of these molecules could be exploited to coordinate to Pd(II) and Pt(II) metal ions, respectively, resulting in the creation of novel metallosupramolecular π-amphiphiles of square-planar geometry. The focus of the presented studies is on the self-assembly behaviour of the OPE ligands and their corresponding metal complexes in polar and aqueous environment. In this way, the underlying aggregation mechanism (isodesmic or cooperative) is revealed and the influence of various factors on the self-assembly process in supramolecular systems is elucidated. In this regard, the effect of the molecular design of the ligand, the coordination to a metal centre as well as the surrounding medium, the pH value and temperature is investigated. N2 - Die vorliegende Arbeit auf dem Gebiet der Supramolekularen Chemie beschäftigt sich mit der Synthese und detaillierten Untersuchung von (bi)pyridin-basierten Oligo(phenylenethinylen) (OPE)-Amphiphilen mit endständigen Glykolketten. Die komplexierende Eigenschaft dieser Moleküle wurde ausgenutzt um sie an Pd(II) bzw. Pt(II) Metallionen zu koordinieren, wobei neuartige metallosupramolekulare π-Amphiphile von quadratisch-planarer Geometrie entstehen. Das Hauptaugenmerk der beschriebenen Studien liegt auf der Selbstorganisation der OPE-Liganden und ihrer Metallkomplexe in polarer und wässriger Umgebung. Dabei wurde der zu Grunde liegende Aggregationsmechanismus (isodesmisch oder kooperativ) bestimmt und der Einfluss verschiedener Faktoren auf den Selbstorganisationsprozess in supramolekularen Systemen aufzeigt. Neben dem Effekt des Moleküldesigns des Liganden und dessen Koordination an ein Metallzentrum wird auch der des umgebenden Mediums, des pH-Wertes sowie der Temperatur erläutert. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Kooperativität KW - Aggregat KW - Amphiphile Verbindungen KW - cooperativity KW - non-covalent interactions KW - (bi)pyridine-based ligand KW - oligo(phenylene ethynylene) (OPE) KW - self-assembly KW - metallosupramolecular π-amphiphiles KW - Aggregation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-133248 ER - TY - THES A1 - Shao, Changzhun T1 - Programming Self-assembly: Formation of Discrete Perylene Bisimide Aggregates T1 - Steuerung der Selbstassemblierung: Aufbau der diskreten Perylenbisimid-Aggregaten N2 - The objective of this thesis focuses on the development of strategies for precise control of perylene bisimide (PBI) self-assembly and the in-depth elucidation of structural and optical features of discrete PBI aggregates by means of NMR and UV/Vis spectroscopy. The strategy for discrete dimer formation of PBIs is based on delicate steric control that distinguishes the two facets of the central perylene surface. The strategy applied in this thesis for accessing discrete PBI quadruple and further oligomeric stacks relies on backbone-directed PBI self-assembly. For this purpose, two tweezer-like PBI dyads bearing the respective rigid backbones, diphenylacetylene (DPA) and diphenylbutydiyne (DPB), were synthesized. The distinct aggregation behavior of these structurally similar PBI dyads can be ascribed to the intramolecular distance between the two PBI chromophores imparted by the DPA and DPB spacers. N2 - Das Ziel dieser Arbeit ist die Entwicklung von Strategien für die präzise Steuerung der PBI-Selbstorganisation sowie die gründliche Aufklärung der strukturellen und optischen Eigenschaften von diskreten PBI-Aggregaten mittels NMR- und UV/Vis-Spektroskopie. Die Strategie der diskreten Dimerbildung von PBIs ist auf der empfindlichen sterischen Kontrolle begründet, die eine Differenzierung der beiden Facetten der zentralen Perylenoberfläche ermöglicht. Um diskrete vierfache und höhere oligomere PBI-Stapel zu erhalten, behilft sich die vorliegende Arbeit der PBI-Selbstorganisation, die durch ein Rückgrat vermittelt wird. Zu diesem Zweck wurden zwei pinzettenartige PBI-Dyaden synthetisiert, die die starren Rückgrate Diphenylacetylen (DPA) bzw. Diphenylbutydiyn (DPB) tragen (Abbildung 2). Das unterschiedliche Aggregationsverhalten dieser strukturell ähnlichen PBI-Dyaden kann den verschiedenen intramolekularen Abständen der beiden PBI-Chromophore zugeschrieben werden, die durch DPA bzw. DPB als Abstandshalter vorgegeben werden. KW - Farbstoff KW - perylene bisimide KW - self-assembly KW - dimer KW - Perylenderivate KW - Selbstorganisation Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69298 ER -