TY - THES A1 - Meinhardt, Thomas T1 - Effiziente Oberflächen-Funktionalisierung von Nanodiamant durch die Click-Reaktion von Alkinen und Aziden T1 - Efficient surface functionalization of nanodiamond via click reaction of alkynes and azides N2 - In dieser Arbeit wurde die Kupfer(I)-katalysierte Cycloaddition von Alkinen und Aziden ("Click-Chemie") als effiziente, vielseitige und milde Reaktion für die Funktionalisierung von Nanodiamantpartikeln etabliert. Es wurden verschiedene Alkin- oder Azid-funktionalisierte Nanodiamantsysteme hergestellt und deren Reaktivität in Click-Reaktionen anhand vielfältiger Beispiele demonstriert. Hierzu wurden neben einfachen Testverbindungen auch komplexere Substanzen (z. B. ein Mannose-Derivat, Polytriazole, Fluoreszenzfarbstoffe, ein Thiazolium-Organokatalysator) durch Triazolsynthese immobilisiert. Zusätzlich wurde eine Methode entwickelt, die die Herstellung funktionalisierter und vollständig dispergierter Nanodiamant-Primärteilchen ermöglicht, wobei gezeigt wurde, dass dieser Weg auch für die Funktionalisierung durch Click-Chemie geeignet ist. Die Analyse der Nanodiamantpartikel erfolgte u. a. durch FT-IR, TGA, Elementaranalyse, Partikelgrößen- und Zetapotentialbestimmung, NMR, HR-TEM, UV / Vis sowie Fluoreszenzspektroskopie und -mikroskopie. N2 - In this work, the copper(I)-catalyzed cycloaddition of alkynes and azides ("click chemistry") was established as an efficient, versatile and mild reaction for the functionalization of nanodiamond particles. Different alkyne- or azide-functionalized nanodiamond systems were prepared and their reactivity in click reactions was demonstrated by various examples. For this purpose, simple compounds as well as more complex substances (e. g. a mannose derivative, polytriazoles, fluorescent dyes, a thiazolium organocatalyst) were immobilized via triazole synthesis. In addition, a method was developed that allows for the preparation of functionalized and completely dispersed nanodiamond primary particles. It was shown that this strategy is also suitable for the functionalization via click chemistry. The nanodiamond particles were analyzed by FT-IR, TGA, elemental analysis, particle size and zeta potential measurements, NMR, HR-TEM, UV / Vis, fluorescence spectroscopy and microscopy. KW - Funktionalisierung KW - Diamant KW - Click-Chemie KW - Partikel KW - Nanodiamant KW - nanodiamond KW - functionalization KW - click chemistry KW - particles Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66410 ER - TY - THES A1 - Liang, Yuejiang T1 - Deagglomerierung und Oberflächenfunktionalisierung von Nanodiamant mittels thermochemischer und mechanochemischer Methoden T1 - Deagglomeration and surface modification of nanodiamond via thermochemical and mechanochemical method N2 - Nanodiamant weist aufgrund seiner herausragenden mechanischen, optischen und biokompatiblen Eigenschaften ein enormes Potential auf. Für eine erfolgreiche Anwendung muss dieser jedoch zunächst desagglomerisiert und an seiner Oberfläche funktionalisiert werden. In dieser Arbeit werden zwei unterschiedlichen Methoden zur Deagglomerierung und Oberflächenfunktionalisierung vorgestellt. Im ersten Teil wird die thermochemische Methode beschrieben, um den ungewöhnlich stark agglomerierten Detonationsnanodiamant zu deagglomerieren. Dabei wird die Strategie verfolgt, den Nanodiamant erst durch eine thermische Behandlung im Vakuum die vorhandenen Oberflächengruppe zu entfernen, π-Bindungen zu etablieren und dann dessen Oberfläche durch kovalente Bindungen zu modifizieren. Im zweiten Teil wird eine mechanochemische Methode für die Deagglomerierung und Oberflächenfunktionalisierung vorgestellt. Dabei wird ein völlig neuer Ansatz (BASD-Verfahren) entwickelt. Die Ultraschallbehandlung in Kombination mit zusätzlichen Mikrokeramikpartikeln eignet sich hervorragend, um Nanodiamant-agglomerate aufzubrechen. Zwei unterschiedliche Reaktionen mit zwei unterschiedlichen Nanodiamantsorten werden getestet: Eine einfache Kondensationsreaktion durch Silanisierung und eine Radikalreaktion über das Diazoniumsalz. In weiteren Experimenten kann gezeigt werden, dass sich die zuerst vorgestellte thermochemische Methode auch eignet, um aus fluoreszierenden NV-Nanodiamant kolloidalen NV-Nanodiamant mit funktionellen Gruppen herzustellen. Der letzte Teil der vorliegenden Arbeit beschäftigt sich mit der Herstellung von Nanodiamanten aus Diamantfilmen mit Hilfe des Top-down Ansatzes, da der gezielte und kontrollierte Aufbau der Gitterstruktur des Diamanten sowie die kontrollierte Einführung bisher nur durch CVD oder Ionenimplantationstechnik möglich ist. N2 - Nanodiamond exhibits an enormous potential due to its outstanding mechanical, optical and biocompatible properties. However, a successful application must begin with deagglomerated and functionalized particles. In this study, two different methods for deagglomeration and surface functionalization are introduced. The first part deals with a thermochemical method for deagglomeration of unusual tight agglomerated detonation nanodiamond. Thereby, a new strategy is developed, in which the nanodiamond is partially graphitized by annealing in vacuum in order to remove the present surface groups and establish π-Bonds, followed by surface-modification through covalent grafting. In the second part, a mechanochemical method for the deagglomeration and surface functionalization is presented. A completely new approach (BASD method) is developed. Ultrasonic treatment in combination with additional micro-ceramic particles is excellently suited for breaking up agglomerates of nanodiamond.Two different reactions with two different types of nanodiamond are tested: A simple condensation reaction by silanization and a radical reaction of the diazonium salt. Further experiments show that the first presented thermochemical method is also suitable for production of colloidal nanodiamond with functional groups from fluorescent NV-nanodiamond. In the last part of the present work, the production of nanodiamonds from diamond films by means of a top-down approach is described. So far, only the CVD production of diamond enables a direct access to a structured diamond material. KW - Nanopartikel KW - Synthesediamant KW - Aggregat KW - Funktionalisierung KW - Kolloid KW - Nanodiamant KW - Deagglomerierung KW - nanodiamond KW - deagglmeration KW - surface functionalisation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56296 ER - TY - THES A1 - Jarre, Gerald T1 - Funktionalisierte Nanodiamanten - Diels-Alder-Reaktion auf Nanodiamantpartikeln T1 - Functionalized Nanodiamonds - Diels Alder reaction on nanodiamond particles N2 - Für Diamantpartikel basiert diese Funktionalisierungschemie auf den bereits vorhanden Oberflächengruppen, die durch die Synthese und Reinigung entstanden sind. Die stabilste Anbindung wäre eine C-C-Verknüpfung der Diamantatome auf der Oberfläche mit den organischen Reagenzien. Um diese Verknüpfung zu erreichen, wurde die Oberfläche mittels Diels-Alder-Reaktion funktionalisiert. Grundvoraussetzung hierfür ist eine Oberfläche, die über eine ausreichende Menge an C=C-Doppelbindungen verfügt. Dies wurde durch eine thermische Behandlung erreicht. Die gewonnenen Ergebnisse zeigen, dass ab einer Behandlungstemperatur von 750 °C keine funktionellen Gruppen durch die eingesetzten Analysemethoden mehr nachgewiesen werden können. Die Elementaranalyse der einzelnen Proben zeigt einen deutlichen Anstieg des Kohlenstoffgehaltes. Nach erfolgreicher thermischer Behandlung des Diamanten wurde durch die Verwendung von Cyclopentadien und Anthracen als Dien gezeigt, dass eine Funktionalisierung über eine Diels-Alder-Reaktion generell möglich ist. Daher wurde als alternatives Dien ein o-Chinodimethan eingesetzt. Hierzu wurde eine systematische Untersuchung der Umsetzung der unterschiedlichen thermisch behandelten Proben mit α,α’-Dibrom-o-xylol durchgeführt. Hierdurch wurde gezeigt, dass der Ausgangsdiamant bei mindestens 750 °C behandelt werden muss, um eine messbare Oberflächenbelegung zu erhalten. Im Anschluss wurde die Funktionalisierbarkeit der eingeführten Arylgruppen überprüft. Durch die Einführung unterschiedlicher funktioneller Gruppen ist es dann möglich, Moleküle für spezielle Anwendungen anzubinden. Durch die Anwendung der klassischen Aromatenchemie war es möglich, die aromatischen Oberflächen zu nitrieren und sulfonieren. Die Sulfonsäuregruppe konnte partiell zum Thiol reduziert werden. Durch Umsetzung dieser Thiolgruppen war es möglich, einen mannosemodifizierten sowie einen farbstoffmodifizierten Diamanten herzustellen. Da die nachträgliche Einführung von Carboxylgruppen mit hohem synthetischem Aufwand verbunden ist, wurde alternativ ein carboxyltragender Vorläufer mit dem thermisch behandelten Diamant umgesetzt. Hierbei wurde eine Oberflächenbelegung von ca. 0.8 mmol g-1 erreicht (Ausgangsdiamant thermisch behandelt bei 750 °C). Im Anschluss wurde die Säuregruppe mit einem einfach geschützten Diamin weiterfunktionalisiert. Hierbei wurden unterschiedliche Methoden zur Amidbildung getestet. Als effektivste Methode stellte sich die Synthese über ein Säurechlorid heraus. Infolgedessen war eine weitgehende Umsetzung (ca. 94 - 88 %) der Säuregruppe möglich. Eine weitere wichtige funktionelle Gruppe für die Anbindung größerer Einheiten stellen die Amine dar. Diese lassen sich einfach darstellen, z. B. durch Reduktion von Cyanogruppen. Daher wurde 2,3-Bis-(brommethyl)-5,6-dicyanopyrazin als Edukt für die Funktionalisierung eingesetzt. Nach anschließender Reduktion der Cyanogruppen wurden primäre Amine erhalten. Die so erzeugte Aminogruppe wurde mit Biotin weiter funktionalisiert. Die bisher eingesetzten o-Chinodimethane sind ausschließlich durch 1,4-Eliminierung zugänglich. Eine sinnvolle Alternative zu diesem Vorläufer ist die Verwendung eines Cyclobutenderivates. Der Vorteil liegt in einer einfacheren Reinigung des Produktdiamanten. Als Testverbindung wurde 2,4-Bis-(methylsulfonyl)-5,6-dihydro-cyclobuta-[d]-pyrimidin verwendet. Nach erfolgreicher Umsetzung mit dem Diamanten wurden die Thioethergruppen in Sulfone überführt und in 2-Position wurde das Sulfon gegen eine Aminogruppe ausgetauscht. Neben den durchgeführten Funktionalisierungsreaktionen wurde eine nasschemische Nachweismethode zur Quantifizierung von primären Aminen entwickelt. Ein Vorteil des Verfahrens ist, dass der Nachweis auf einfache Weise durchführbar ist und nur 1 – 2 mg Diamantprobe nötig sind. Die gewonnen Ergebnisse zeigen, dass durch den Nachweis verlässliche Angaben über die genaue Aminmenge erhalten werden. N2 - For nanodiamond particles the functionalisation chemistry is based on the already existing surface groups, which were introduced during synthesis and cleaning. The most stable grafting would be a C-C coupling of the diamond atoms on the surface with organic reagents. To achieve this linkage the surface is func-tionalized via Diels-Alder reaction. Basic prerequisite for this is a surface which has a sufficient amount of C=C double bonds. This was achieved by thermal treatment. The obtained results show, that above a treatment temperature of 750 °C no functional groups can be detected anymore by the used analytic methods. The elemental analysis of each sample shows a significant increase in carbon content. This is also an indication of a successful removal of most oxygen containing surface groups. After successful thermal treatment of the diamond it was shown by the usage of cyclopentadiene and anthracene, that in general a functionalization via Diels-Alder reaction is possible. Because of this as an alternative diene an o-quinodimethane was applied. For this purpose a systematic study of the reaction of the different thermally annealed diamond samples with α,α’-di-bromo-o-xylene was performed. This has shown that pristine diamond has to be treated at least at 750 °C to obtain a measurable surface coverage. Subsequently, the functionalization of the introduced aryl groups was investigated. By the introduction of different functional groups it is possible to bind molecules for specific applications. By applying classical aromatic chemistry, it was possible to nitrate and sulfonate the aromatic moieties. The sulfonic acid was partially reduced to a thiol. By reacting the thiol group it was possible to synthesize a mannose and dye modified nanodiamond Because the subsequent introduction of carboxylic groups is connected with a high synthetic effort an alternative carboxylic group carrying precursor was reacted with thermally annealed diamond. A surface coverage of 0.8 mmol g-1 was achieved (pristine diamond annealed at 750 °C). Subsequently, the carboxylic group was modified by introducing a Boc-protected diamine. Different methods for amide formation have been tested. As the most effective method the reaction using an acid chloride as an intermediate was identified. Using this coupling method, an almost complete conversion (about 94 – 88 %) of the acid group was possible. Another important functional group for the grafting of larger moities are the amines. They can easily be formed by e. g. the reduction a cyano group. Here 2,3-bis-(bromomethyl)-5,6-dicyanopyrazine was used as a precursor for the functionalization of the diamond. After subsequent reduction of the cyano groups, primary amines were obtained. The generated amino group have been reacted with biotin. So far the used o-quinodimethanes were solely accessible by 1,4-elimination. A reasonable alternative for these precursors is the use of a cyclobutene derivative. The advantage is an easier purification of the product. As a test compound 2,4-bis(methylsulfonyl)-5,6-dihydrocyclobuta-[d]-pyrimidine was used. After reaction with the diamond the thioether group was transformed into sulfones and in the 2-position the sulfone was replaced by an amino group. In addition to the functionalization reactions carried out in this work, a wet chemical method was developed for the quantification of primary amines on the diamond surface. An advantage of the developed method is that it can be easily carried out and only 1 - 2 mg of the diamond sample is needed. The obtained results show that through this detection method a reliable value of the exact amount of amine groups can be made. KW - Funktionalisierung KW - Festkörperoberfläche KW - Diels-Alder-Reaktion KW - Chinodimethane KW - Synthesediamant KW - Nanodiamant KW - Nanodiamond KW - Functionalisation KW - Diels-Alder reaction KW - o-Quinodimethane Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56229 ER -