TY - THES A1 - Völker, Sebastian T1 - Synthesis, Spectroscopic and Electrochemical Properties of Squaraine Polymers T1 - Synthese, Spektroskopische und Elektrochemische Eigenschaften von Squaraine Polymeren N2 - In this work the synthesis, the spectroscopic and electrochemical investigation as well as some applications of a broad diversity of indolenine squaraine dyes were presented. This diversity was based on two parent squaraine dyes, one standard trans-configured compound (M1) and one in which one central oxygen atom was replaced by a dicyanomethylene moiety (M2), which increased the acceptor strength and induced a cis-configuration. The variety of synthesised dyes included functionalised squaraine monomers, donor- and acceptor-substituted monomeric model squaraines, donor- and acceptor-squaraine copolymers, pure squaraine homopolymers, a squaraine-squaraine copolymer, as well as some conjugated cyclic oligomers. In order to be able to synthesise all these different kinds of dyes, several bromine and boronic ester derivatives were synthesised, which enabled the use of the Suzuki cross coupling reaction, to generate model dyes and copolymers. In addition, the bromine derivatives were used to carry out the Yamamoto homocoupling reaction to the respective homopolymers and macrocycles. The absorption maximum of unsubstituted reference dye M1 was found at ~ 15500 cm–1, while that of M2 was red-shifted to ~ 14300 cm–1 due to the increased acceptor strength of the central unit. The extinction coefficients were in the order of ~ 300000 M–1 cm–1 and ~ 200000 M–1 cm–1, respectively. It was found that the implementation of functional groups (M3–M9), additional electron donors (M10–M19) or acceptors (M20–M22) at the periphery lead to bathochromic shifts of the absorption depending on the strength of either - and/or -donating properties of the substituents. For the bis- and triarylamine substituted dyes M10–M13 and the dibrominated dyes M5 and M7 the electronic structure of the mono- and diradical (di)cations was explored using the interplay of cyclic voltammetry, spectroelectrochemistry, and DFT calculations. It was demonstrated that the monoradical cations still show a cyanine-like character and are delocalised Robin-Day class III species due to the low redox potential of the squaraine bridge between the additional amine redox centres. To the best of my knowledge, this made M13+∙, with an N-N-distance of 26 bonds between the additional redox centres to the longest bis(triarylamine) radical cation that is completely delocalised. For the diradical dications, the situation was of larger complexity. The computed most stable energetic state of the dianisylamine-substituted dyes turned out to be a broken-symmetry state with almost equal contributions of an open-shell singlet and triplet state. In addition, it was shown that the HOMO–1→HOMO transition dominated the absorption spectra of the diradical dications where the trans-/cis-configuration of the squaraines had a direct impact due to symmetry reasons. Based on the donor–squaraine model compounds M10–M19, a series of donor–squaraine copolymers was synthesised (P7–P12) in order to further red shift and broaden the low energy absorption band. However, these effects were only of marginal extent. Both the optical and the electrochemical derived band gaps were barely lowered compared to the respective monomeric model dyes. This was assigned to an increased squaraine-squaraine distance and resulting lower exciton coupling between the squaraine chromophores due to the bridging units. In addition, according to semiempirical calculations the bridges were twisted out of the squaraine plane what reduced conjugational effects between the chromophores. To sum up, the idea to insert additional electron rich bridging units in order to create copolymers with broad and red-shifted absorption did not fully work out for the presented systems. The addition of strong electron accepting NDI units at the periphery resulted in M21, the most unique monomeric model squaraine in this work. The common picture of a sharp low energy squaraine absorption completely altered due to the addition of the NDIs and a rather broad and solvent dependent low energy absorption was found. Spectroelectrochemical experiments and semiempirical calculations showed that this band is a superposition of the common squaraine HOMO→LUMO transition and a partial squaraine→NDI charge transfer transition. The latter was lost upon oxidation of the squaraine and the absorption spectrum of the monocation of M21 was found to be nearly a 1:1 image of a pure squaraine monocation. Both the monomeric model M21 and the respective copolymer P13 showed low electrochemically obtained band gaps of 1.05–1.20 eV, which were the lowest of all squaraines in this work. For both dyes, transient absorption measurements in the fs-time regime revealed the ultrafast formation of a CS state via an intermediate CT state within a few ps. Besides, charge recombination to the ground state also occured within a few ps. In the polymer, there was barely any further energy or charge transfer within the excited state lifetime and therefore the CS state was confined on adjacent squaraine-NDI pairs and did not further travel along the polymer strand. The Ni-mediated Yamamoto homocoupling reaction was applied for the synthesis of the homopolymers (P1–P5). In contrast to the donor–squaraine copolymers, those polymers revealed strongly red-shifted and broad absorption in the red to NIR region in addition to a sharp fluorescence. These features could be explained to originate mainly from the exciton coupling of localised excited states and the presence of different superstructures in solution. For the polymers P1 and P2, an elongated J-type polymer chain caused the strong lowest energy absorption band whereas a zig-zag type arrangement of the single chromophores lead to transitions into both low and high energy excited states of the excitonic manifold. For the polymers P3 and P4, several polymer fractions of different size were investigated. Here, also an elongated chain with J-type character induced the lowest energy absorption band whereas a helical H-type arrangement caused transitions to higher energies of the excitonic manifold. The fractions to which these structures were formed depended on the chain length and the solvent. In thin film measurements, it was shown that the initially in solution formed superstructures were partly retained in the thin film but could be altered by annealing procedures. A control of the superstructures should enable the controlled tuning of the optical properties. Despite the strong interaction of the chromophores in the excited state, the redox potentials of the homopolymers barely differed to those of the respective reference dyes, indicating negligible electronic interaction in the ground state. In addition squaraine-squaraine copolymer P6, consisting of alternating parent dyes M1 and M2, was synthesised. Likewise to the homopolymers, a broad and red-shifted absorption was observed. This was explained by exciton coupling theory, which was extended to also suit alternating copolymers. In toluene, an extraordinary narrow and intense lowest energy absorption band was observed. This exchange narrowing might be a result of a highly ordered J-type structure of the polymer especially in this solvent because it was not found in others. The features of the polymer may be compared to typical J-aggregates formed from monomeric cyanine molecules for example and the polymer used as model for excitonic interactions in an alternating copolymer. Transient absorption measurements revealed a strong energy dependence of the decay traces of the copolymer, most strikingly at early decay times. This was assigned to the occurrence of multiple excitations of one polymer strand (due to the large extinction coefficients of the polymer) and resulting exciton-exciton annihilation. Due to the large exciton diffusion constants that were estimated, the static exciton-exciton annihilation was the rate limiting process of the decay, in contrast to other conjugated polymers, where in thin film measurements the decay was diffusion controlled. To sum up, for the polymers consisting of exclusively squaraine chromophores, it was shown that the exciton coupling of single chromophores with strong transition dipole moments was a fruitful way to tune the absorption spectra. As a side product of some of the polycondensation reactions, unprecedented cyclic conjugated oligomers such as the triarylamine-bridged dimer Dim1, the cyclic homotrimers Tri1–Tri3, and the tetramer Tet1 were obtained by recycling GPC in low yields. Especially the cyclic trimers showed unusual absorption and even more extraordinary fluorescence properties. They showed multiple fluorescence bands in the NIR that covered a range from ~ 8000–12500 cm–1 (800–1250 nm). First hints from theoretical calculations indicated that the trimer was not fully planar but comprised a mixture of both planar and bent single squaraine chromophores. However, final results of the calculations were still missing at the time of writing. In the last part of this work, the application of some monomeric and polymeric squaraines in binary and ternary bulk heterojunction solar cells was demonstrated. Also the utilisation as a dopant in a polymer matrix in an OLED device was shown. The homopolymers P1–P4 were tested in the binary BHJ solar cells revealing poor performances and especially very low short circuit currents. The utilisation of the polymers P3 and P4 that carried the dicyanomethylene group resulted in higher open circuit voltages due to the lower LUMO energy levels but still an overall poor performance. Neither for the different alkyl chains nor for the size of the polymers was a trend observed. In the ternary BHJ solar cells, small amounts of either monomer M14 or polymers P1A, P4–1 or P13 were added to a P3HT/PCBM system in order to generate an additional pathway for charge or energy transfer that should result in a better device performance. However, for none of the tested squaraines, improved solar cells could be built. In similarity to the binary solar cells, the short circuit currents were lower compared to a P3HT/PCBM reference device. These low short circuit currents indicated that the morphology of the squaraine dyes was the major limitation in those devices. It is possible that the dimethyl groups at the indolenine hindered a favoured alignment of the compounds that would allow decent charge transport. In the squaraine doped OLED the squaraine M6 worked rather well as an NIR emitter. Already at low dye loads the fluorescence of the host polymer SY-PPV was completely quenchend and emission from the squaraine was observed. For electroluminescence measurements, a lower dye load (0.5 wt.%) compared to the photoluminescence measurements was sufficient, indicating that apart from FRET additional quenching mechanisms were at work in the electrically driven devices such as charge carrier dynamics. N2 - In dieser Arbeit wurde die Synthese sowie die spektroskopische und elektrochemische Untersuchung einer Reihe unterschiedlichster Squarainfarbstoffe präsentiert. Darüber hinaus wurde in diversen Kooperationen deren Verwendung in optoelektronischen Bauteilen wie z.B. organischen Solarzellen und OLEDs untersucht. Die große Vielfalt der Squaraine basierte auf zwei Indoleninsquarain Stammverbindungen. Das Squarain M1 ist ein klassisches Squarain und zeigt eine trans-Konfiguration der Indoleningruppen zueinander. In M2 wurde ein Sauerstoffatom durch eine Dicyanomethylengruppe ausgetauscht, was zu einer höheren Elektronenakzeptorstärke sowie einer cis-Konfiguration des Squarains führt. Die Vielfalt der darauf basierenden Squaraine beinhaltete neben den unsubstituierten Referenzverbindungen funktionalisierte Squaraine, donor- und akzeptorsubstitutierte monomere Modellverbindungen, Donor- und Akzeptor-Squarain Copolymere, reine Squarain Homopolymere, ein Squarain-Squarain Copolymer sowie diverse konjugierte makrozyklische Squaraine. Um überhaupt diese Vielfalt synthetisieren zu können, wurde zunächst eine Reihe monomerer Squaraine mit Brom- oder Borestergruppen synthetisiert, welche sich mittels Pd-katalysierter Suzuki-Kupplung in donor- und akzeptorsubstituierte monomere Modelle und Copolymere überführen ließen. Des Weiteren wurden die bromfunktionalisierten Squaraine mittels der Ni-unterstützten Yamamoto-Kupplung zu Homopolymeren und den entsprechenden Makrozyklen umgesetzt. Das Absorptionsmaximum der Referenzverbindung M1 lag bei ~ 15500 cm–1. Das von M2 lag aufgrund der erhöhten Akzeptorstärke des zentralen Bausteins bei ~ 14300 cm–1. Die Extinktionskoeffizienten waren erwartungsgemäß squaraintypisch hoch mit Werten von ~ 300000 M–1 cm–1, bzw. 200000 M–1 cm–1. Es wurde gezeigt, dass die Einführung von funktionellen Gruppen (M3–M9), zusätzlichen Elektronendonoren (M10–M19) oder -akzeptoren (M20–M22) an der Peripherie zu einer Rotverschiebung des Absorptionsmaximums führte, wobei das Ausmaß der Verschiebung von der - und/oder -Donorstärke der Substituenten abhing. Im Falle der di- und triarylaminsubstituierten Squaraine M10–M13 und der dibromierten Squaraine M5 und M7 wurde die elektronische Struktur der Mono- und Diradikal(di)kationen untersucht, wofür das Zusammenspiel von Cyclovoltammetrie, Spektroelektrochemie und DFT-Rechnungen notwendig war. Es wurde gezeigt, dass sämtliche Monoradikalkationen den Cyanincharakter beibehalten und vollständig delokalisierte Verbindungen der Robin-Day Klasse III sind, was auf das niedrige Redoxpotential der Squarainbrücke zurückzuführen war. Mit einem N-N-Abstand von 26 Bindungen zwischen den zusätzlichen Redoxzentren ist M13+∙ dadurch das nach bestem Wissen längste komplett delokalisierte Bis(triarylamin) Radikalkation. Die Situation der Diradikaldikationen war etwas komplexer. Die theoretischen Berechnungen ergaben für die diarylaminsubstituierten Squaraine einen energetisch günstigsten Zustand, welcher aus gleichen Anteilen eines offenschaligen Singulett- und Triplettzustandes bestand. Darüber hinaus beherrschten die HOMO–1→HOMO Übergänge die Absorptionsspektren der Diradikaldikationen, in welchen auch direkt der Einfluss der cis-/trans-Konfiguration ersichtlich war. Basierend auf den Donor–Squarain Modellverbindungen (M10–M19) wurde eine Reihe von Donor–Squarain Copolymere (P7–P12) synthetisiert, um eine weitere Rotverschiebung des Absorptionsmaximums sowie eine Verbreiterung der Absorptionsbande zu erreichen. Die Auswirkungen waren allerdings sehr gering und sowohl die optischen als auch die elektrochemischen Eigenschaften unterschieden sich kaum von denen der Modellverbindungen. Als Ursache wurde zum einen der durch die Brücke vergrößerte Abstand der Squaraine zueinander ausgemacht, welcher eine Verminderung der Exzitonkopplungsenergie bewirkte. Zum anderen zeigten semiempirische Berechnungen, dass die Brücken etwas aus der Ebene der Squaraine verdrillt waren, was zu einer Verminderung der konjugativen Effekte zwischen den Squarainen führte. Zusammenfassend lässt sich sagen, dass das Konzept eine breite niederenergetische Absorption der Farbstoffe zu schaffen, indem man die Squaraineinheiten mit zusätzlichen Elektronendonoren verbrückt, für die präsentierten Systeme nicht funktioniert hat. Das Anbringen der starken NDI Elektronenakzeptoren an einem Squarain führte zu M21 dem außergewöhnlichsten Modell in dieser Arbeit. Anstelle der allgemein bei Squarainen vorgefundenen scharfen niederenergetischen Absorptionsbande, zeigte M21 eine stark verbreiterte und solvensabhängige Bande. Spektroelektochemische Experimente und semiempirische Rechnungen konnten zeigen, dass es sich dabei um eine Überlagerung des klassischen squarainlokalisierten HOMO→LUMO Übergangs sowie eines partiellen Squarain→NDI “charge transfer” Übergangs handelte. Letzterer verschwand bei der Oxidation von M21 zum Monokation und dessen Absorptionsspektrum war nahezu ein Abbild dessen eines reinen Squarainmonokations. Sowohl das Modell M21 als auch das Polymer P13 zeigten niedrige Bandlücken von 1.05–1.20 eV, welche die niedrigsten aller Verbindungen in dieser Arbeit darstellten. Transiente Absorptionsmessungen zeigten außerdem für beide Farbstoffe die extrem schnelle Ausbildung eines ladungsgetrennten Zustandes binnen weniger ps. Auch die Rekombination in den Grundzustand erfolgte innerhalb weniger ps. Im Polymer wurde kaum ein weiterer Ladungs- oder Energietransfer während der Lebenszeit des angeregten Zustandes beobachtet, was darauf schließen ließ, dass der ladungsgetrennte Zustand auf benachbarten Squarain/NDI Einheiten lokalisiert war und nicht den Polymerstrang entlang wanderte. Mittels der Ni-unterstützten Yamamoto-Kupplung wurden die Homopolymere P1–P5 synthetisiert. Diese zeigten eine stark rotverschobene und verbreiterte Absorption im roten bis nah-infraroten Bereich, im Gegensatz zu den Donor–Squarain Copolymeren, sowie eine scharfe Fluoreszenz. Diese Eigenschaften wurden hauptsächlich auf die Exzitonenkopplung von lokalisierten angeregten Zuständen und der Präsenz unterschiedlicher Strukturen der Polymere zurückgeführt. Eine lineare J-artige Struktur führte zu der intensivsten und zugleich niederenergetischsten Bande von P1 und P2, während eine zick-zack Struktur auch zu Absorptionen höherer Energie führte. Bei den Polymeren P3 und P4 wurden gleich mehrere Fraktionen unterschiedlicher Molmassenverteilung untersucht. Auch hier war eine gestreckte J-artige Struktur verantwortlich für die niederenergetischste Absorption, während eine helikale H-artige Struktur für die Absorptionen bei höherer Energie verantwortlich war. Der Anteil zu welchem diese unterschiedlichen Strukturen gebildet wurden zeigte sich abhängig von der Kettenlänge der Polymere als auch des Lösungsmittels. Absorptionsmessungen von Dünnfilmen zeigten, dass die ursprünglich in Lösung vorliegenden Strukturen zum Teil auch im Dünnfilm erhalten blieben, jedoch durch Tempern verändert werden konnten. Durch eine Kontrolle dieser Strukturbildung könnten auch die optischen Eigenschaften gezielt beeinflusst werden. Trotz der starken elektronischen Kopplung der Squaraineinheiten im angeregten Zustand zeigte sich außerdem, dass die Redoxpotentiale sich zu denen der monomeren Stammverbindungen kaum unterschieden und somit nur eine vernachlässigbare Interaktion im Grundzustand vorlag. Des Weiteren wurde ein Squarain-Squarain Copolymer (P6) synthetisiert, welches aus alternierenden Einheiten der Stammverbindungen M1 und M2 bestand. Ähnlich wie bei den Homopolymeren waren eine starke Verbreiterung sowie eine Rotverschiebung der niederenergetischen Absorption zu beobachten. Darüber hinaus zeigte das Polymer eine markante Bande bei höherer Energie, welche mittels einer Erweiterung des Exzitonenmodells für Copolymere erklärt werden konnte. In Toluol zeigte sich die niederenergetischste Absorptionsbande außergewöhnlich intensiv und schmal, was auf sogenanntes „exchange narrowing“ zurückgeführt wurde. Dieses könnte aus einer sehr geordneten J-artigen Struktur, welche wohl nur in Toluol vorlag, resultiert haben. Transiente Absorptionsmessungen zeigten eine starke Abhängigkeit der Abklingkurven von der Pumpenergie, insbesondere zu frühen Zeiten. Dies wurde auf das Auftreten von Mehrfachanregung (begünstigt durch den hohen Extinktionskoeffizienten) eines Polymerstranges und darauf folgender Exziton-Exziton Auslöschung zurückgeführt. Die statische Exziton-Exziton Auslöschung war der ratenbestimmende Schritt des Abklingprozesses, da sehr große Exzitondiffusionskonstanten bestimmt wurden. Dies war im Gegensatz zu anderen konjugierten Polymeren, in deren Dünnfilm die Exzitondiffusion als ratenbestimmender Schritt bestimmt wurde. Zusammengefasst lässt sich sagen, dass für Polymere welche ausschließlich aus Squaraineinheiten bestanden, die Exzitonenkopplung von Chromophoren mit starken Übergangsdipolmomenten eine vielversprechende Weise war, die optischen Eigenschaften zu verändern. Als Nebenprodukt der Polykondensationsreaktionen wurden in niedrigen Ausbeuten mittels Recycling-GPC beispiellose zyklische konjugierte Oligosquaraine erhalten, wie zum Beispiel ein mit Triarylaminen verbrücktes Dimer (Dim1) sowie einige Homotrimere (Tri1–3) und ein Homotetramer (Tet1). Insbesondere die Absorptions- und Fluoreszenzeigenschaften der Trimere waren außergewöhnlich. Sie zeigten mehrere Fluoreszenzbanden im NIR Spektralbereich die einen Bereich von ~ 8000–12500 cm–1 (800–1250 nm) abdeckten. Ersten theoretischen Berechnungen zu Folge, waren die zyklischen Trimere nicht vollständig planar, sondern lagen als eine Mischung aus planaren und abgewinkelten Squaraineinheiten vor, welche für diese besonderen Eigenschaften verantwortlich waren. Nichtsdestotrotz fehlten noch endgültige Ergebnisse der Berechnungen um dies mit endgültiger Sicherheit zu sagen. Im letzten Abschnitt wurde die Verwendung einiger Substanzen in optoelektronischen Bauteilen beschrieben. Die Homopolymere P1–P4 wurden in binären BHJ Solarzellen untersucht, welche allerdings nur eine geringe Effizienz zeigten, insbesondere aufgrund geringer Kurzschlussströme. Die Verwendung von P3 und P4 führte zwar zu höheren Leerlaufspannungen, bedingt durch die Dicyanomethylengruppe und das resultierende niedrigere HOMO Energielevel, allerdings blieben sowohl die Effizienz als auch die Kurzschlussströme niedrig. Weder für die unterschiedlichen Molmassenverteilungen der Polymerfraktionen, noch für die unterschiedlichen Alkylketten konnte ein Trend bezüglich der Leistung der Solarzellen bestimmt werden. In den ternären BHJ Solarzellen wurden kleine Mengen von entweder Monomer M14 oder den Polymeren P1A, P4–1 oder P13 zu einem P3HT/PCBM System beigemischt. Dadurch sollte ein zusätzlicher Weg für den Elektronen- oder Energietransport geschaffen und höhere Effizienzen erzielt werden. Jedoch führte keine der Verbindungen zu einer Verbesserung des Systems, sondern es wurden verringerte Kurzschlussströme beobachtet, welche auch zu geringerer Effizienz führten. Die niedrigen Kurzschlussströme deuteten an, dass die Morphologie der Squaraine der limitierende Faktor war. Es ist vorstellbar, dass die Dimethylgruppe am Heterozyklus der Squaraineinheit eine vorteilhafte Anordnung der Chromophore sterisch verhinderte, welche zu effizienterem Ladungs- oder Energietransport hätte führen können. Das Monomer M6 wurde als Dotiersubstanz zu einem Polymer (SY-PPV) in einer OLED beigemischt und fungierte erfolgreich als NIR-Emitter. Schon bei geringen Mengen des Squarains wurde die Fluoreszenz des Polymers gelöscht und stattdessen Fluoreszenz aus dem Squarain beobachtet. Bei Elektrolumineszenzmessungen reichten geringere Mengen (0.5 Gew.-%) als bei Photolumineszenzmessungen, um die Fluoreszenz des Polymers vollständig zu löschen. Dies deutete darauf hin, dass abgesehen von FRET zusätzliche Quenchmechanismen, wie Ladungsträgerdynamiken, in den elektrisch betriebenen Bauteilen eine Rolle spielten. KW - Squaraine KW - Konjugierte Polymere KW - UV-VIS-Spektroskopie KW - Elektrochemie KW - Squaraine KW - Squaraines KW - Polymere KW - Polymers KW - Farbstoff Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101638 ER - TY - THES A1 - Selig-Parthey, Ulrike T1 - Methods of Nonlinear Femtosecond Spectroscopy in the Visible and Ultraviolet Regime and their Application to Coupled Multichromophore Systems T1 - Methoden der nichtlinearen Femtosekundenspektroskopie im sichtbaren und ultravioletten Spektralbereich und ihre Anwendung auf gekoppelte Multichromophor-Systeme N2 - Time-resolved spectroscopic studies of energy transfer between molecules in solution form a basis for both, our understanding of fundamental natural processes like photosynthesis as well as directed synthetic approaches to optimize organic opto-electronic devices. Here, coherent two-dimensional (2D) spectroscopy opens up new possibilities, as it reveals the correlation between absorption and emission frequency and hence the full cause-and-effect chain. In this thesis two optical setups were developed and implemented, permitting the recording of electronic 2D spectra in the visible and in the hitherto unexplored ultraviolet spectral range. Both designs rely on the exclusive manipulation of beam pairs, which reduces the signal modulation to the difference between the transition frequency of the system and the laser frequency. Thus - as has been shown experimentally and theoretically - the timing precision as well as mechanical stability requirements are greatly reduced, from fractions of the oscillation period of the exciting light wave to fractions of the pulse duration. Two-dimensional spectroscopy and femtosecond transient absorption (TA) as well as different theoretical approaches and simulation models were then applied to coupled multichromophore systems of increasing complexity. Perylene bisimide-perylene monoimide dyads were investigated in cooperation with Prof. Dr. Frank Würthner and Prof. Dr. Bernd Engels at the University of Würzburg. In these simplest systems studied, global analysis of six different TA experiments unequivocally revealed an ultrafast interchromophoric energy transfer in the 100 fs range. Comparison between the obtained transfer rates and the predictions of Förster theory suggest a breakdown of this point-transition-dipole-based picture at the donor-acceptor distances realized in our compounds. Furthermore, a model including conformational changes and an interchromophoric charge transfer has been derived to consistently describe the observed pico- to nanosecond dynamics and fluorescence quantum yields. A second collaboration with Prof. Dr. Gregory Scholes (University of Toronto, Canada) and Prof. Dr. Paul Burn (University of Queensland, Australia) addressed the photophysics of a series of uorene-carbazole dendrimers. Here, a combination of 2D-UV spectroscopy and femtosecond ansiotropy decay experiments revealed the initial delocalization of the excited state wave function that saturates with the second generation. In room temperature solution, disorder-induced localization takes place on the time scales comparable to our instrument response, i.e. 100 fs, followed by energy transfer via incoherent hopping processes. Lastly, in tubular zinc chlorin aggregates, semi-synthetic analogues of natural lightharvesting antennae that had again been synthesized in the group of Prof. Dr. Frank Würthner, the interchromophoric coupling is so strong that coherently coupled domains prevail even at room temperature. From an analysis of intensity-dependent TA measurements the dimensions of these domains, the exciton delocalization length, could be determined to span 5-20 monomers. In addition, 2D spectra uncovered efficient energy transfer between neighboring domains, i.e. ultrafast exciton diffusion. N2 - Zeitaufgelöste spektroskopische Untersuchungen zu Energietransferprozessen zwischen Molekülen in Lösung bilden die Grundlage nicht nur für unser Verständnis elementarer natürlicher Vorgänge wie der Photosynthese, sondern auch für gerichtete Synthesen zur Optimierung organischer opto-elektronischer Bauteile. Die kohärente zweidimensionale (2D) Spektroskopie eröffnet hier neue Möglichkeiten, da sie - durch Aufdeckung der Korrelation zwischen Absorptions- und Emissionsfrequenz - die konventionelle transiente Absorption (TA) um die Offenbarung der Ursache erweitert. Im Rahmen dieser Arbeit wurden zwei optische Aufbauten entworfen und umgesetzt, die die Aufnahme von elektronischen 2D Spektren im sichtbaren und im bis dahin unerschlossenen ultravioletten Spektralbereich ermöglichen. Beide Designs beruhen auf dem Prinzip der ausschließlich paarweisen Strahlführung, wodurch die Modulation des Signals auf die Differenz zwischen Übergangsfrequenz des Systems und Laserfrequenz reduziert wird. Damit verringern sich - wie theoretisch und experimentell gezeigt - die Anforderungen sowohl an die mechanische Stabilität der Laborumgebung als auch an die Genauigkeit der verwendeten Verzögerungsbühnen erheblich, von Bruchteilen der Oszillationsperiode des anregenden Lichts auf Bruchteile der Laserpulsdauer. Sowohl die 2D Spektroskopie als auch die transiente Absorption sowie unterschiedliche theoretische Ansätze und Simulationsmodelle wurden in den weiteren Teilen dieser Arbeit auf gekoppelte Multichromophor-Systeme unterschiedlicher Komplexität angewandt. Im einfachsten dieser Systeme, einem Perylen-basierten Heterodimer, einer Kooperation mit Prof. Dr. Frank Würthner und Prof. Dr. Bernd Engels an der Universität Würzburg, konnte durch globale Analyse von sechs verschiedenen TA-Messungen ein ultraschneller Energietransfer im 100 fs Bereich zweifelsfrei identifiziert werden. Ein Vergleich mit Vorhersagen aus der Förster-Theorie legt einen Zusammenbruch dieser auf punktförmigen Übergangsdipolen beruhenden Theorie bei den vorliegenden Interchromophor- Abständen nahe. Darüber hinaus wurde für die Piko- bis Nanosekunden-Zeitskalen ein Schema vorgestellt, das Konformationsänderungen sowie einen Ladungstransfer beinhaltet und das die beobachtete Dynamik wie auch die gemessenen Fluoreszenz-Quantenausbeuten konsistent beschreibt. In einer weiteren Kooperation wurden in Zusammenarbeit mit der Gruppe von Prof. Dr. Gregory Scholes (University of Toronto, Kanada) Fluoren-Carbazol-Makromoleküle untersucht, die in der Gruppe von Prof. Dr. Paul Burn (University of Queensland, Australien) synthetisiert worden waren. In diesen sogenannten Dendrimeren konnte durch die Kombination von 2D Spektroskopie und Femtosekunden-Anisotropie-Zerfalls-Experimenten eine anfängliche Delokalisierung der Wellenfunktion des angeregten Zustands abgeleitet werden, die mit der zweiten Generation saturiert. Die Umgebungsunordnung in Raumtemperatur-Lösung führt hier zu einer ultraschnellen Lokalisierung innerhalb der Zeitauflösung des Experiments, gefolgt von inkohärenten Energietransfer-Prozessen. In tubularen Zink Chlorin Aggregaten schließlich, semisynthetischen Analoga zu den Lichtsammelantennen natürlicher Chlorosome, die ebenfalls von Prof. Dr. Frank Würthner's Gruppe bereitgestellt wurden, ist die Kopplung zwischen den einzelnen Molekülen so stark, dass kohärent gekoppelte Segmente selbst bei Raumtemperatur Bestand haben. Die Ausdehnung dieser kohärenten Domänen, die Exzitonen-Delokalisierungslänge, konnte aus der Intensitätsabhängigkeit des transienten Absorptionssignals auf 5-20 Monomere bestimmt werden. 2D Spektren zeigten dabei den effizienten Energietransfer zwischen benachbarten Domänen im Aggregat, also einen ultraschnellen Exzitonen-Diffusionsprozess. KW - Femtosekundenspektroskopie KW - UV-VIS-Spektroskopie KW - Polychromophores System KW - Spektroskopie KW - femtosecond spectroscopy Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-74356 ER - TY - THES A1 - Schäfer, Julian T1 - Synthesis and Photophysical Investigation of Donor-Acceptor-Substituted meta- and para-Benzene Derivatives T1 - Synthese und Photophysikalische Untersuchung Donor-Akzeptor-Substituierter meta- und para-Benzolderivate N2 - Im ersten Teil dieser Arbeit wurde die erfolgreiche Synthese einer Serie von bisTriarylamin (bisTAA) Verbindungen vorgestellt. Zum einen wurde das Substitutionmuster an der Benzol Brückeneinheit in Form einer meta- bzw. para-Ständigkeit der Redoxzentren (pX bzw. mX), und zum anderen die energetische Lage der Brückeneinheit durch zwei elektronen-schiebende oder ziehende Substituenten X (mit X = OMe, Me, Cl, CN, NO2) in 2,5-Position variiert. Im Falle der meta-Serie wurden auch einige in 4,6-Position substituierte Verbinungen hergestellt (mX46). Die neutral Verbindungen wurden bezüglich ihrer elektrochemischen und photophysikalischen Eigenschaften untersucht. Durch Oxidation konnten die gemischt valenten (MV), kationischen bisTAA-Verbindungen erzeugt werden. Der thermisch induzierte Lochtransfer (HT) wurde durch temperatur-abhängige ESR-Spektroskopie untersucht. Während die HT-Rate k und HT-Barriere ΔG in mX unbeeinflusst von den Substituenten X sind, steigen gleichzeitig k und ΔG in der pX-Serie mit zunehmenden Elektonenschub von X an. Diese zunächst widersprüchliche Beobachtung konnte durch einen ansteigenden Einfluss von Lösungsmitteleffekten und dadurch resultierend, einer zusätzlichen effektiven Barriere erklärt werden. Der optisch induzierte Lochtransfer wurde mittels UV/Vis/NIR-Spektroskopie untersucht. Die pX-Serie zeigte eine Zuhname der elektronischen Kopplung V und dementsprechende eine Abnahme von ΔG, mit Anstieg des elektonenschiebenden Charakters von X. Für mX war eine spektroskopische Bestimmung dieser Parameter nicht möglich. Die mX46-Serie zeigte ein intermediäres Verhalten, wobei MV-Verbindungen mit stark elektronenschiebenden X eine ähnliche hohe Kopplungen wie pX aufwiesen, was mit Hilfe von DFT-Rechnungen bezüglich der Molekülorbitale erklärt werden konnte. Im zweiten Teil dieser Arbeit wurde die Synthese einer Serie von Verbindungen mit Triarylamin (TAA) als Donor und Naphthalindiimid (NDI) als Akzeptor vorgestellt. Auch hier wurde zum einen das Substitutionmuster an der Benzol-Brückeneinheit in Form einer meta- bzw. para-Ständigkeit der Redoxzentren (pXNDI bzw. mXNDI) variieiet und die energetische Lage der durch X (mit X = OMe, Me, Cl, CN, NO2) in 2,5-Position variiert. Außerdem wurde die in 4,6-Position substituierte Verbinungen mOMe46NDI hergestellt. Alle Verbindungen wurden bezüglich ihrer elektochemischen und photophysikalischen Eigenschaften untersucht. Die Elektronentransferprozesse der Ladungsseparierung (CS) und Ladungsrekombination (CR) dieser Verbindungen sollten mittels transienter Absorptionsspektroskopie (TA) in Toluol untersucht werden. Für die Nitroverbindungen p-/mNO2NDI war dies nicht möglich, da sich diese unter Bestrahung zersetzten. Die CR von pXNDI waren nicht im ns-Bereich detektierbar, weshalb sich auf die mXNDI-Serie (mit X = OMe–CN) konzentriert wurde. Die CS wurde mittels fs-TA untersucht. Nach optischer Anregung konnte die Bildung eines CS-Zustandes detektiert werden, dessen Bildungsgeschwindigkeit hin zu elektronen-ziehenden Substituenten X steigt. Die CR wurde mit ns-TA untersucht. Sie findet in der Marcus invertierten Region statt und zeichnet sich wird durch ein biexponentialles Abklingverhaten, was durch ein Singulet-Triplett Gleichgewicht im CS-Zustand zustande kommt, aus. Durch Anlegen eines externen Magnetfeldes ließ sich das Abklingverhalten entscheidend verändern und es konnte eine Singulett-Triplett Aufspaltung nachgewiesen werden. Dieser Befund konnte weiterhin durch Simulation der Abklingkurven bestätigt werden. In beiden Teilen dieser Arbeit konnte ein entscheidender Einfluss der Benzolbrücke auf die auftretenden Ladungstransferprozesse gezeigt werden. Für den HT in Grundzustand der MV bisTAA Verbindungen, sowie der ET im angeregten Zustand der Donor-Akzeptor-Verbindungen, wurden die höchsten ET-Raten für die para-Serien pX und pXNDI gefunden, während die meta-Serien mX und mXNDI deutlch kleine Transferraten aufwiesen. In beiden Studien zeigten die meta46-Verbindungen mX46 und mOMeNDI46 ein intermediäres Verhalten, zwischen denen der para- und meta-Verbindungen. N2 - In the first part of this thesis, the synthesis of a series of bistriarylamine (bisTAA) compounds was presented. On the one hand, the substitution pattern of the TAA at the benzene bridging unit was varied from meta- to para-position (pX and mX), on the other hand, the energetic position of the bridging unit was tuned by use of two electron-donating or electron-accepting substituents X (with X = OMe, Me, Cl, CN, NO2) in 2,5-position. In case of the meta-series, compounds with X in 4,6-position were synthesized (mX46). The photophysical and electrochemical properties of the neutral compounds were investigated. The cationic mixed valence (MV) bisTAA compounds could be generated by oxidation. Thermally induced hole transfer (HT) in the groud state was investigated by temperature depending ESR spectroscopy. While the HT rate k and HT barrier ΔG in mX are unaffected by the substituents X, k and ΔG in the pX series increase simultaneously with increasing electron-donating strength of X. This, at first contradictory observation can be explained by an increasingly important solvent dynamic effect and an additional, effective barrier. The optically induced HT was examined by UV/Vis/NIR spectroscopy. The pX-series revealed an increase of the electronic coupling V, and correspondingly a decrease of ΔG, with an increase of the electron donating character of X. For mX, a spectroscopic determination of these parameters was not possible. mX46 showed an intermediate behavior, MV compounds with strong electron-donating X, obtained coupling of similar magnitude as pX, which could be explained by means of DFT calculations, with regard to the molecular orbitals. In the second part of this work, the synthesis of a series of dyads with triarylamine (TAA) as a donor and naphthalene diimide (NDI) as an acceptor was presented. Again, the substitution pattern of the redox centers at the benzene bridging unit was varied in the form of a meta- or para-position (pXNDI or mXNDI) and the energetic position of the bridging unit was varied by X (with X = OMe, Me, Cl, CN, NO2) attached in the 2,5-position. Additionally, compound mOMe46NDI with methoxy substitution in 4,6-position was synthesized. The photophysical and electrochemical properties of these compounds were investigated. The electron transfer (ET) processes of charge separation (CS) and charge recombination (CR) of these were investigated by means of transient absorption (TA) spectroscopy in toluene. This was not possible for the nitro-compounds p-/mNO2NDI, since they decomposed under irradiation. In addition to that, the CR of pXNDI was not detectable by ns-setup, which is why the focus was given to the mXNDI series (with X = OMe–CN).The CS was examined by fs-TA spectroscopy, where the formation of a CS state could be detected. The rise time of the CS states decreases with increasing electron-withdrawing substituents X. CR was examined with ns-TA spectroscopy and shows a biexponential decay behavior, which is caused by singlet-triplet equilibrium in the CS state. By applying an external magnetic field, the decay behavior was decisively changed and the singlet-triplet splitting could be determined. This finding could also be confirmed by simulating the decay curves. In both parts of this work, the decisive influence of the benzene bridging unit on the appearing ET processes became obvious. For the HT in the ground state of the MV compound, as well as for the ET in the exited states of the DA compounds, the highest transfer rates were found for the para-series pX and pXNDI, and much smaller rates for the meta-series mX and mXNDI. The meta46-compounds mX46 and mOMeNDI46 showed an intermediate behavior in both parts of this work. KW - Synthese KW - Elektronentransfer KW - UV-VIS-Spektroskopie KW - Magnetfeldeffekt KW - intervalence charge transfer KW - transient absorption spectroscopy Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-155007 ER - TY - THES A1 - Lundt, Nils T1 - Strong light-matter coupling with 2D materials T1 - Starke Licht-Materie Kopplung mit 2D Materialien N2 - This publication is dedicated to investigate strong light-matter coupling with excitons in 2D materials. This work starts with an introduction to the fundamentals of excitons in 2D materials, microcavities and strong coupling in chapter 2. The experimental methods used in this work are explained in detail in chapter 3. Chapter 4 covers basic investigations that help to select appropriate materials and cavities for the following experiments. In chapter 5, results on the formation of exciton-polaritons in various materials and cavity designs are presented. Chapter 6 covers studies on the spin-valley properties of exciton-polaritons including effects such as valley polarization, valley coherence and valley-dependent polariton propagation. Finally, the formation of hybrid-polaritons and their condensation are presented in chapter 7. N2 - Diese Veröffentlichung beschäftigt sich mit starker Licht-Materie Kopplung mit Exzitonen in 2D Materialien. Dies Arbeit beginnt mit einer Einführung in Exzitonen in 2D Materialien, in Mikrokavitäten und starke Licht-Materie Kopplung (Kapitel 1). Die verwendeten, experimentellen Methoden werden in Kapitel 3 beschrieben. Kapitel 4 deckt Voruntersuchungen ab, die helfen die richtigen Materialien und Mikrokavitäten für die folgenden Experimente auszuwählen. In Kapitel 5 werden die Ergebnisse zur Erzeugung von Exziton-Polaritonen in verschiednen Materialen und Kavitäten gezeigt. Kapitel 6 beschäftigt sich mit Untersuchungen der Spin-Tal Eigenschaften der Exziton-Polaritonen, inkl. Effekte wie Tal Polarisation und Koherenz. Abschließend wird in Kapitel 7 die Erzeugung von Hybrid-Polaritonen und deren Kondensation dargestellt. KW - Exziton-Polariton KW - Monoschicht KW - Halbleiter KW - Photolumineszenz KW - UV-VIS-Spektroskopie KW - exciton-polariton KW - 2D material KW - strong light matter coupling KW - transition metall dichalcogenide monolayer KW - photoluminescence spectroscopy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-187335 ER - TY - THES A1 - Langhojer, Florian T1 - New techniques in liquid-phase ultrafast spectroscopy T1 - Neue Techniken der Ultrakurzzeitspektroskopie in der flüssigen Phase N2 - Contents List of Publications 1 Introduction 2 Basic concepts and instrumentation 2.1 Mathematical description of femtosecond laser pulses 2.2 Optical quantities and measurements 2.2.1 Intensity 2.2.2 Absorbance and Beer-Lambert law 2.3 Laser system 2.4 General software framework for scientific data acquisition and simulation 2.4.1 Core components 2.4.2 Program for executing a single measurement sequence 2.4.3 Scan program 2.4.4 Evolutionary algorithm optimization program 2.4.5 Applications of the software framework 2.5 Summary 3 Generation of ultrabroadband femtosecond pulses in the visible 3.1 Nonlinear optics 3.1.1 Nonlinear polarization and frequency conversion 3.1.2 Phase matching 3.2 Optical parametric amplification 3.3 Noncollinear optical parametric amplifier 3.4 Considerations and experimental design of NOPA 3.4.1 Options for broadening the NOPA bandwidth 3.4.2 Experimental setup 3.5 NOPA pulse characterization 3.5.1 Second harmonic generation frequency-resolved optical gating 3.5.2 Transient grating frequency-resolved optical gating 3.6 Compression and shaping methods for NOPA pulses 3.6.1 Grating compressor 3.6.2 Prism compressor 3.6.3 Chirped mirrors 3.6.4 Detuned zero dispersion compressor 3.6.5 Deformable mirror pulse shaper 3.6.6 Liquid crystal pulse shaper 3.7 Liquid crystal pulse shaper 3.7.1 Femtosecond pulse shapers 3.7.2 Experimental design and parameters 3.7.3 Optical setup of the LC pulse shaper 3.7.4 Calibrations of the pulse shaper 3.8 Adaptive pulse compression 3.8.1 Closed loop pulse compression 3.8.2 Open loop pulse compression 3.9 Conclusions 4 Coherent optical two-dimensional spectroscopy 4.1 Introduction 4.2 Theory of third order nonlinear optical spectroscopies 4.2.1 Response function, electric fields, and signal field 4.2.2 Signal detection with spectral interferometry 4.2.3 Evaluation of two-dimensional spectra and phasing 4.2.4 Selection and classification of terms in induced nonlinear polarization 4.2.5 Oscillatory character of measured signal 4.3 Previous experimental implementations 4.4 Inherently phase-stable setup using conventional optics only 4.4.1 Manipulation of pulse pairs as a basis for stability 4.4.2 Experimental setup 4.4.3 Measurement procedure 4.4.4 Data evaluation 4.5 First experimental results 4.5.1 Demonstration of phase stability 4.5.2 2D spectrum of Nile Blue at room temperature 4.6 Summary and outlook 5 Product accumulation for ultrasensitive femtochemistry 5.1 The problem of sensitivity in femtochemistry 5.2 Accumulation for increased sensitivity 5.2.1 Comparison of conventional and accumulative sensitivity 5.2.2 Schematics and illustrative example 5.3 Experimental setup 5.4 Calibration and modeling of accumulation 5.5 Experiments on indocyanine green 5.5.1 Calibration of the setup 5.5.2 Chirped pulse excitation 5.5.3 Adaptive pulse shaping 5.6 Conclusions 6 Ultrafast photoconversion of the green fluorescent protein 6.1 Green fluorescent protein 6.2 Experimental setup for photoconversion of GFP 6.3 Calibration of the setup for GFP 6.3.1 Model for concentration dynamics of involved GFP species 6.3.2 Estimate of sensitivity 6.4 Excitation power study 6.5 Time-resolved two-color experiment 6.6 Time-delayed unshaped 400 nm – shaped 800 nm pulse excitation 6.6.1 Inducing photoconversion with chirped pulses 6.6.2 Photoconversion using third order phase pulses 6.7 Conclusions 7 Applications of the accumulative method to chiral systems 7.1 Introduction 7.2 Chiral asymmetric photochemistry 7.2.1 Continuous-wave circularly polarized light 7.2.2 Controlled asymmetric photochemistry using femtosecond laser pulses 7.3 Sensitive and fast polarimeter 7.3.1 Polarimeter setup 7.3.2 Detected signal I(t) 7.3.3 Angular amplification 7.3.4 Performance of the polarimeter 7.4 Molecular systems and mechanisms for enantioselective quantum control 7.4.1 Binaphthalene derivatives 7.4.2 Photochemical helicene formation 7.4.3 Spiropyran/merocyanine chiroptical molecular switches 7.5 Summary 8 Summary Zusammenfassung Bibliography Acknowledgements N2 - Inhalt Liste der Veröffentlichungen 1 Einleitung 2 Grundlegende Konzepte und Instrumente 2.1 Mathematische Beschreibung von Femtosekundenlaserpulsen 2.2 Optische Größen und Messungen 2.2.1 Intensität 2.2.2 Absorbanz und Lambert- Beer Gesetz 2.3 Lasersystem 2.4 Allgemeines Softwareframework zur wissenschaftlichen Datenaufnahme und Simulation 2.4.1 Kernkomponenten 2.4.2 Programm zur Aufnahme einer einzelnen Messsequenz 2.4.3 Scanprogramm 2.4.4 Evolutionärer Algorithmus 2.4.5 Anwendungen des Softwareframeworks 2.5 Zusammenfassung 3 Erzeugung ultrabreitbandiger Femtosekundenlaserpulse im sichtbaren Spektralbereich 3.1 Nichtlineare Optik 3.1.1 Nichtlineare Polarisation und Frequenzkonversion 3.1.2 Phasenanpassung 3.2 Optisch-parametrische Verstärkung 3.3 Nichtkollinearer optisch-parametrischer Verstärker 3.4 Erwägungen und experimenteller Entwurf 3.4.1 Optionen zur Verbreiterung der Bandbreite des NOPA 3.4.2 Experimenteller Aufbau 3.5 NOPA Pulscharacterisierung 3.5.1 Second harmonic generation frequency-resolved optical gating 3.5.2 Transient grating frequency-resolved optical gating 3.6 Kompressions- und Formungsmethoden für NOPA Pulse 3.6.1 Gitterkompressor 3.6.2 Prismenkompressor 3.6.3 Chirped mirrors 3.6.4 Verstimmter Nulldispersionskompressor 3.6.5 Pulsformer auf Basis eines verformbaren Spiegels 3.6.6 Flüssigkristallpulsformer 3.7 Flüssigkristallpulsformer 3.7.1 Femtosekundenpulsformer 3.7.2 Experimenteller Entwurf und experimentelle Parameter 3.7.3 Optischer Aufbau des Flüssigkristallformers 3.7.4 Kalibrationen des Formers 3.8 Adaptive Pulskompression 3.8.1 Pulskompression in einer geschlossenen Schleife 3.8.2 Pulskompression in einer offenen Schleife 3.9 Zusammenfassung 4 Kohärente optische, zweidimensionale Spektroskopie 4.1 Einleitung 4.2 Theorie der Spektroskopien dritter Ordnung 4.2.1 Antwortfunktion, elektrische Felder und Signalfeld 4.2.2 Signalmessung mittels spektraler Interferometrie 4.2.3 Auswertung der zweidimensionalen Spektren und Phasieren 4.2.4 Auswahl und Klassifikation von Termen der induzierten nichtlinearen Polarisation 4.2.5 Oszillatorisches Verhalten des Messignals 4.3 Bisherige experimentelle Realisierungen 4.4 Inhärent phasenstabiler Aufbau auf Basis von nur konventionellen Optiken 4.4.1 Manipulation von Pulspaaren als Grundlage der Stabilität 4.4.2 Experimenteller Aufbau 4.4.3 Messprozedur 4.4.4 Datenauswertung 4.5 Erste experimentelle Ergebnisse 4.5.1 Demonstration der Phasenstabilität 4.5.2 2D Spektrum von Nilblau bei Raumtemperatur 4.6 Zusammenfassung und Ausblick 5 Akkumulation von Photoprodukten zur ultrasensitiven Messung von Femtochemie 5.1 Das Problem der Sensitivität in der Femtochemie 5.2 Akkumulation zur Erhöhung der Sensitivität 5.2.1 Vergleich Sensitivität der konventionellen und akkumulativen Methoden 5.2.2 Schema und illustratives Beispiel 5.3 Experimenteller Aufbau 5.4 Kalibration und Modellierung der Akkumulation 5.5 Experimente am Farbstoff Indocyanin Grün 5.5.1 Kalibration des Aufbaus 5.5.2 Anregung mit gechirpten Pulsen 5.5.3 Adaptive Pulsformung 5.6 Zusammenfassung 6 Ultraschnelle Photokonversion des grün fluoreszierenden Proteins 6.1 Grün fluoreszierendes Protein 6.2 Experimenter Aufbau zur Photokonversion von GFP 6.3 Kalibration des Aufbaus für GFP 6.3.1 Modell der Konzentrationsdynamiken der beteiligten GFP Spezies 6.3.2 Abschätzung der Sensitivität 6.4 Variation der Anregungsleistung 6.5 Zeitaufgelöstes Zweifarbexperiment 6.6 Anregung mit zeitverzögerten ungeformte 400 nm und geformten 800 nm Laserpulsen 6.6.1 Induktion der Photokonversion mit gechirpten Pulsen 6.6.2 Photokonversion mit Pulsen mit dritter Ordnung Phase 6.7 Zusammenfassung 7 Anwendungen der akkumulativen Methode auf chirale Systeme 7.1 Einleitung 7.2 Chirale asymmetrische Photochemie 7.2.1 Zirkular polarisiertes Dauerstrichlicht 7.2.2 Kontrollierte asymmetrische Photochemie mit Femtosekundenlaserpulsen 7.3 Sensitives und schnelles Polarimeter 7.3.1 Polarimeteraufbau 7.3.2 Messsignal I(t) 7.3.3 Winkelverstärkung 7.3.4 Leistung des Polarimeters 7.4 Molekulare Systeme und Mechanismen für enantioselektive Quantenkontrolle 7.4.1 Binaphthalinderivate 7.4.2 Photochemische Helicenbildung 7.4.3 Spiropyran/Merocyanin als chiral-optischer Schalter 7.5 Zusammenfassung 8 Zusammenfassung (englisch) Zusammenfassung (deutsch) Literaturverzeichnis Danksagungen KW - Ultrakurzzeitspektroskopie KW - Optische Spektroskopie KW - VIS-Spektroskopie KW - UV-VIS-Spektroskopie KW - Spektroskopie KW - Nichtlineare Spektroskopie KW - Fourier-Spektroskopie KW - ultrafast spectroscopy KW - two-dimensional spectroscopy KW - four-wave mixing KW - vis spectroscopy Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-39337 ER - TY - THES A1 - Hinderer, Sandra T1 - Charakterisierung der Freisetzung verschiedener Antibiotika aus resorbierbaren anorganischen Knochenersatzmaterialien sowie die Untersuchung des Einflusses auf materialcharakteristische Eigenschaften T1 - Characterization of the release of various antibiotics from resorbable inorganic bone substitute materials and the study of the influence on material characteristic properties N2 - Synthetische anorganische Knochenersatzmaterialien auf Calcium-Phosphat- und Magnesium-Phosphat-Basis wurden in der hier vorliegenden Dissertation mit verschiedenen handelsüblichen Antibiotika versetzt und deren Freisetzungsverhalten charakterisiert. Zudem wurde der Einfluss des Antibiotikazusatzes auf bestimmte materialcharakteristische Eigenschaften untersucht, hierbei fanden die Quecksilberporosimetrie, die Röntgendiffraktometrie und die Rasterelektronenmikroskopie ihre Anwendung. Insbesondere für die Knochenersatzmaterialien auf Calcium-Phosphat-Basis sollte eine klinisch praktikable und demnach möglichst einfache Methode etabliert werden, um die Kombination mit einem Antibiotikum durchzuführen. Die Detektion der Antibiotika erfolgte mit Hilfe eines UV/VIS-Spektrophotometers. Zudem wurde für einige ausgewählte Kombinationen aus Antibiotikum und Knochenersatzmaterial durch einen Agardiffusionstest die antibakterielle Wirkung nach der Freisetzung aus dem jeweiligen Trägermaterial bestätigt. N2 - Synthetic inorganic bone substitute materials based on calcium phosphate and magnesium phosphate were mixed with various commercially available antibiotics and their release behavior was characterized in the present dissertation. In addition, the influence of the antibiotic addition on certain material characteristic properties was investigated using mercury porosimetry, X-ray diffractometry and scanning electron microscopy. For the calcium-phosphate-based bone substitutes in particular, the aim was to establish a clinically practicable and therefore as simple as possible method for carrying out the combination with an antibiotic. Antibiotics were detected using a UV/VIS spectrophotometer. In addition, for some selected combinations of antibiotic and bone substitute material, an agar diffusion test was used to confirm the antibacterial effect after release from the respective carrier material. KW - Wirkstofffreisetzung KW - Antibiotikum KW - Knochenzement KW - Calciumphosphat KW - UV-VIS-Spektroskopie KW - Antibiotikafreisetzung KW - local drug delivery Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-230836 ER -