TY - THES A1 - Hatzing, Florian T1 - Evaluation eines Raman-Spektroskopie basierten Klassifikationssystems von Leukoplakien des Stimmlippenepithels T1 - Evaluating a classification system of glottic leukoplakias based on Raman spectrosopy N2 - Leukoplakien der Stimmlippe können verschiedene histopathologische Diagnosen wie beispielsweise Hyper- oder Parakeratosen, dysplastische Prozesse oder invasive Karzinome des Epithels zugrunde liegen. Bisher werden klinisch detektierte Leukoplakien nach Probeexzision und histologischer Aufarbeitung anhand verschiedener histomorphologischer Klassifikationssysteme, wie zum Beispiel dem System der WHO oder dem „Ljubljana classification“-System, eingeordnet. Hinsichtlich der Aussagekraft in Bezug auf die Prognose einer Entwicklung eines invasiven Plattenepithelkarzinoms sind die genannten Systeme jedoch eingeschränkt. In der Raman-Spektroskopie wird das zu untersuchende Gewebe mit einem Laser bestrahlt. Die beim Durchdringen des Materials entstehende Raman-Streuung ist charakteristisch für verschiedene Moleküle und Bindungen. So kann mithilfe dieser Methodik auf die molekularbiologische Zusammensetzung des Gewebes geschlossen werden. In dieser Arbeit wurde die Klassifikation verschiedener Dysplasiegrade des Stimmlippenepithels mittels Spektraldaten aus der Raman-Spektroskopie nachvollzogen und erörtert, ob aus den gewonnenen Informationen auf das Risiko der Entstehung eines invasiven Plattenepithelkarzinoms geschlossen werden kann. Durch den Vergleich der Mittelwertspektren dysplasiefreier, dysplastischer und maligne entarteter Gewebeproben sowie der Methodik einer Hauptkomponentenanalyse kann auf eine unterschiedliche Zusammensetzung der Studiengruppen an Bestandteilen der DNA, Proteine, Lipide und Kohlenhydrate geschlossen werden. Unter Verwendung einer linearen Diskriminanzanalyse wurden Modelle erstellt, um die Klassifizierbarkeit der verschiedenen Studiengruppen nachzuvollziehen. Außerdem wurden die Modelle auf die Aussagekraft einer Prognose hinsichtlich einer möglichen Karzinomentwicklung überprüft. Durch diese Modelle können gute Differenzbarkeiten durch die Spektraldaten der einzelnen Studiengruppen untereinander erreicht werden. Zudem kann mit hoher Spezifität, Sensitivität und Genauigkeit prognostiziert werden, ob sich beim jeweiligen Patienten ein invasives Plattenepithelkarzinom der Stimmlippe entwickeln wird. Um die erlangten Erkenntnisse zu validieren und das Verfahren in den klinischen Alltag zu integrieren, bedarf es jedoch prospektiver Studien. N2 - Leukoplakias of the vocal cord can lead to various diagnoses like keratosis, dysplasias or an invasive squamous cell carcinoma. Clinically detected leukoplakias are examined histologically after excision and can be graded with cellular and histological criteria, e.g. the WHO classification scheme or the “Ljubljana classification“. These classifications are often limited regarding a prognosis of the development of an invasive squamous cell carcinoma. With the method of Raman spectroscopy biological tissue can be further analysed on a molecular level through characteristic Raman scatterings of molecules and bonds. In this thesis, classification of dysplastic grades was retraced by information of the Raman spectra leading to further results which could deliver a prognosis of possible development of a squamous cell carcinoma. In comparison of the average spectra and with a subsequent principal component analysis of tissue without dysplastic changes, different dysplastic grades or invasive squamous cell carcinoma could be discriminated by means of detecting a specific composition of DNA, proteins, lipids or carbohydrates. Furthermore, with a linear discriminant analysis, good differentiation of the various groups could be confirmed and patients who developed a squamous cell carcinoma of the vocal cord could be identified in the follow-up examination. To verify these conclusions and implement these findings into clinical procedures and therapeutic measures, more prospective studies are needed. KW - Raman-Spektroskopie KW - Leukoplakie KW - Stimmband KW - Stimmlippe KW - leukoplakia KW - vocal cord KW - Raman spectroscopy Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-235161 ER - TY - JOUR A1 - Elsässer, S. A1 - Schiebl, M. A1 - Mukhin, A. A. A1 - Balbashov, A. M. A1 - Pimenov, A. A1 - Geurts, J. T1 - Impact of temperature-dependent local and global spin order in \(R\)MnO\(_3\) compounds for spin-phonon coupling and electromagnon activity JF - New Journal of Physics N2 - The orthorhombic rare-earth manganite compounds \(R\)MnO\(_3\) show a global magnetic order for \(T\) < \(T\)\(_N\), and several representatives are multiferroic with a cycloidal spin ground state order for \(T\) < \(T\)\(_c\)\(_y\)\(_c\)\(_l\) < \(T\)\(_N\) \(\approx\) 40 K. We deduce from the temperature dependence of spin–phonon coupling in Raman spectroscopy for a series of \(R\)MnO\(_3\) compounds that their spin order locally persists up to about twice \(T\)\(_N\). Along the same line, our observation of the persistence of the electromagnon in GdMnO\(_3\) up to \(T\) \(\approx\) 100 K is attributed to a local cycloidal spin order for \(T\) > \(T\)\(_c\)\(_y\)\(_c\)\(_l\), in contrast to the hitherto assumed incommensurate sinusoidal phase in the intermediate temperature range. The development of the magnetization pattern can be described in terms of an order–disorder transition at \(T\)\(_c\)\(_y\)\(_c\)\(_l\) within a pseudospin model of localized spin cycloids with opposite chirality. KW - physics KW - RMnO3 KW - multiferroics KW - electromagnon KW - Raman spectroscopy KW - spin-phonon coupling Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-171978 VL - 19 ER - TY - THES A1 - Rühl, Nicolas T1 - Spektroelektrochemie an einzelnen (6,5)-Kohlenstoffnanoröhren T1 - Spectroelectrochemistry of single (6,5)-carbon nanotubes N2 - Im Rahmen der vorliegenden Arbeit wurde durch einzelmolekülspektroskopischer bzw. -mikroskopischer Methoden in Kombination mit einer mikrofluischen Zel- le unter Potenzialkontrolle die Elektrochemie von einzelnen einwandigen (6,5)- Kohlenstoffnanoröhren untersucht. Hierfür wurde ein Nahinfrarot-Photolumineszenz- Mikroskop aufgebaut und eine speziell an die experimentellen Vorgaben angepasste elektrochemische Zelle entwickelt, insofern als drei Elektroden (Arbeits-, Gegen- und Referenzelektrode) in einen mikrofluidischen Chip integriert wurden. Darüber hinaus war für die Durchführung der Experimente unter Wasser- und Sauerstoffaus- schluss die Konstruktion eines Handschuhkastens notwendig, sowie eine allgemeine Vorbehandlung der Elektrolytlösungen zur Entfernung gelöster Gase und Wasserreste. Ein weiteres Projekt umfasste den Aufbau einer chemischen Gasphasenabschei- dungsapparatur zur Synthese von Kohlenstoffnanoröhren. Die hierbei durchgeführten Experimente erbrachten Klarheit über den Einfluss der Prozessparameter Druck, Temperatur und Durchflussrate an Edukten. Aus den PL-Intensitätsänderungen bei Potenzialvariation konnten Reduktions- und Oxidationspotenziale (ERed = 0.15 V; EOx = 1.34 V) einzelner (6,5)-SWNTs gegen- über einer Platin Referenzelektrode und einem daraus resultierenden Redoxpotenzial von ∆ERedOx = 1.19 V ermittelt werden. Durch diese einzelmolekülspektroskopische Methode konnte zum einen gewährleistet werden, dass nur dieser spezielle Chira- litätstyp untersucht wurde und zum anderen eine Verfälschung der Resultate durch einen Potenzialabfall wie er typischerweise in CNT-Filmen auftritt aussgeschlossen werden. Eine Kombination der PL-Daten mit der Ramanintensitätsabhängigkeit des (6,5)-SWNT-S2-Übergangs bei Potenzialvariation erlaubte eine genauere Analyse des Löschmechanismus der PL von Kohlenstoffnanoröhren. Mithilfe eines von Her- tel et al. entwickelten diffusionslimitierten Stoßdesaktivierungsmodells konnte eine invers-quadratische Proportionalität zwischen der (6,5)-SWNT-Emission und den spannungsinduzierten Ladungsträgern ausgemacht werden. Auf Grundlage dieses Ergebnisses folgt, dass die über Photolumineszenzänderungen ermittelten Reduktions-und Oxidationswerte nicht mit den Bandkanten der CNTs übereinstimmen müssen, und dass für deren Bestimmung vielmehr auf Raman- bzw. Absorptionsspektroskopi- sche Techniken zurückgegriffen werden muss. Die einzelmolekülspektroskopische Herangehensweise ermöglichte ferner eine statis- tische Analyse der Verteilung der Reduktions- und Oxidationspotenziale im Vergleich zu den jeweiligen Erwartungswerten. Hierdurch konnte eine Einteilung der Modifika- tionseinflüsse auf das SWNT-Redoxverhalten in zwei Grenzfälle erfolgen. Es wurde angenommen, dass diese als “Dispergiermitteleffekte” und “CNT-Strukturdefekte” be- zeichneten Auswirkungen entweder das Resultat einer heterodispersen Verteilung an DOC auf der CNT-Oberfläche oder eine Folge von Defekten in der CNT-Gitterstruktur waren. In diesem Zusammenhang ergab sich aus der interpartikulären Analyse der Reduktions- und Oxidationswerte eine Korrelation, die einem dominierenden Einfluss der “CNT-Strukturdefekte” zugeordnet werden konnte. Dieser Beobachtung entgegen- gesetzt konnten aber auch über Untersuchungen der Redoxpotenziale innerhalb einer (6,5)-SWNT lokale Bereiche ausgemacht werden, die eine signifikante Abhängigkeit von “Dispergiermitteleffekte” aufwiesen. Abgesehen von diesen Einflüssen auf den Emissionsverlauf wurde auch eine Be- trachtung der Breite des spannungsgesteuerten Emissionsabfall durchgeführt. Da- raus konnte ermittelt werden, dass diese Ausdehnung eine Konsequenz aus der PL- Löschungseffizienz der Ladungsträger ist und, dass bei einer Verteilung von 0.32 Löschzentren pro Nanometer eine vollständige Abnahme der Photolumineszenzinten- sität induziert wird. Darüber hinaus wurde im Rahmen dieser Arbeit das redoxchemische Verhalten in- dividueller (6,5)-SWNTs in Wechselwirkung mit Ferrocenmolekülen untersucht. Die erhaltenen Ergebnisse ließen annehmen, dass die sich ausbildende Verbindung nicht-kovalenter Natur ist. Zwei verschiedene Gründe führten zu dieser Erkennt- nis: einerseits ließen sich die Ferrocenmoleküle von der CNT-Oberfläche durch ein Durchspülen des mikrofluidischen Kanals mit einer reinen DMF-Lösung entfernen und andererseits war keine dauerhafte Emissionsminderung durch die Ausbildung kovalenter Bindungen zu beobachten. Aus der potenzialabhängigen PL wurde zudem ein Elektronentransfer der Ferrocenmoleküle in die optisch generierten Löcher des CNT-Valenzbandes festgestellt und über eine anregungsintensitätsabhängige Messung die Zunahme dieses Ladungstransfers bei steigendem Photonenfluss nachgewiesen. Hinsichtlich der Anwendung von Kohlenstoffnanoröhren zur Elektrolyse bzw. Photo- lyse von Wasser wurde auch die Redoxchemie von (6,5)-SWNTs in diesem Solvens untersucht. Bezüglich der Emissionsintensität konnte gezeigt werden, dass diese im Vergleich zu organischen Lösungsmitteln reduziert vorliegt. Außerdem wurde eine irreversible Reaktion nach anodischer Polarisation über eine dauerhafte Löschung der PL beobachtet. Die Bestimmung der hierfür notwendigen Reaktionsumstände erbrachte, dass Wasser, Exzitonen (erzeugt durch optische Anregung) und spannungs- induzierte Löcher im Valenzband zur Bildung einer [SWNT(Q)]-Spezies führen, welche die irreversible Minderung der CNT-Emission verursacht. Darüber hinaus konnte die Reaktionsgeschwindigkeit über eine Kinetik pseudo-nullter-Ordnung be- schrieben werden, unter der Voraussetzung, dass die soeben genannten Parameter konstant verblieben. Desweiteren zeigte sich in einer ferrocenhaltigen Lösung, dass der Löscheffekt der [SWNT(Q)]-Spezies im anodischen Potenzialbereich teilweise reduziert wird. Es wurde angenommen, dass diese Beobachtung auf eine Oxidation der Löschzentren durch die Fc+-Kationen gründet. Mit Hilfe der CVD-Apparatur gelang es Kohlenstoffnanoröhren zu synthetisieren, wobei Ethanol als Kohlenstoffquelle und ein Eisen-Kobalt-Zeolith-Gemenge als Ka- talysator diente. Die Analyse der verschiedenen Prozessparameter zeigte, dass bei T = 750 °C das beste Verteilungsverhältnis zwischen den gewünschten (6,5)-SWNTs und anderen CNT-Chiralitäten bzw. dem amorphen Kohlenstoff vorliegt. Hierfür war, dass bei T < 750 °C die Verbrennung unerwünschter amorpher Kohlenstoffreste nur geringfügig stattfindet, und dass bei T > 750 °C die Bildung anderer Chiralitäten mit größerem Durchmesser als die (6,5)-SWNT bevorzugt wurde. Die Variation der Durchflussrate hingegen wirkte sich nur in einer absoluten Zunahme aller Chirali- täten aus. Die Steigerung des (6,5)-SWNT-Anteils für höhere Durchflüsse gelang trotzdem durch die geschickte Auswahl geeigneter Druck- und Temperaturwerte. Die Experimente zur Untersuchung der Druckabhängigkeit wiesen auf eine Relation mit dem Gesetz von Le Chatelier hin, insofern als bei einer Druckverringerung eine Verschiebung der Ethanol-Crackreaktion auf Produktseite stattfand. In diesem Zusam- menhang wurde angenommen, dass die damit verstärkt gebildeten Moleküle Ethan, Ethen und Methan den CNT-Anteil zwar erhöhen, jedoch auch eine Steigerung der amorphen Kohlenstoffkonzentration verursachen. Dementsprechend ergab ein Druck von p = 9 mbar das beste (6,5)-SWNT zu dem amorphen Kohlenstoffverhältnis. Anhand der Arbeiten in dieser Dissertation sind neue Erkenntnisse zwischen der PL-Sensitivität von (6,5)-SWNTs und deren Ladungszustand erhalten worden. Insbe- sondere die genaue Bestimmung der Korrelation zwischen der Photolumineszenz und den induzierten Ladungsträgern ermöglicht einen gezielteren Einsatz von Kohlenstoff- nanoröhren – so zum Beispiel im Bereich der Sensorik. In diesem Zusammenhang zeigen auch die interpartikulären Analysen der Redoxpotenzialverteilung die genau- en Auswirkungen vom Lösungsmittel und der Defektdichte auf die elektronische Struktur der CNTs auf. Darüber hinaus kann aus der Ursachenbestimmung für die Varianz der literaturbekannten Reduktions- bzw. Oxidationspotenziale fortan die ge- eignete spektroskopische Methode zur Evaluierung der Position von Leitungs- und Valenzband in Kohlenstoffnanoröhren besser eingegrenzt werden. Die spektroelektro- chemischen Analysen von (6,5)-SWNTs im Lösungsmittel Wasser und speziell die Bestimmung der Kinetik für die auftretende Reaktion liefern einen tieferen Einblick in die Wechselwirkung (6,5)-SWNT-H2O. Diese Ergebnisse sind insbesondere bei der Verwendung von Kohlenstoffnanoröhren als Elektrodenmaterial für die photolytische bzw. elektrolytische Spaltung von Wasser in Wasserstoff und Sauerstoff von Bedeu- tung. Neben der Untersuchung der SWNT-Wasser Interaktion unter andoischer und optischer Anregung, die zu einer kovalenten Bindung führte, wurde mit Hilfe der (6,5)- SWNT-Ferrocen Wechselwirkung ein Beispiel für eine nichtkovalente Redoxreaktion dargestellt, womit ein Vergleich dieser beiden Spezies und ihrer unterschiedlichen Auswirkungen auf die elektronische Struktur aufgezeigt werden konnte. N2 - In the present study the electrochemistry of individual (6,5)-single wall carbon nano- tubes was investigated using a combination of electrochemical methods and single molecule fluorescence spectroscopy and microscopy. For this purpose a near infrared photoluminescence microscope was built and an electrochemical cell incorporated into a microfluidic chip was designed. To exclude oxygen and water during the ex- periments a glove box was constructed and for the electrolyte solutions a general preparation routine was executed, which included a degassing and drying of the solvent. A further project of this thesis was the design of a chemical vapor deposition apparatus to synthesize carbon nanotubes. The experiments provided clarity on the influence of process parameters such as pressure, temperature and flow rate of the reactants. The emission changes due to potential variation allowed for the determination of the reduction ERed = 0.15 V and oxidation potential EOx = 1.34 V of individual (6,5)- SWNTs with reference to a platinum electrode. Accordingly a total redoxpotential of ∆ERedOx = 1.19 V was obtained. The single molecule spectroscopic approach ensured further that only one specific CNT-chirality was investigated and that no potential drop like in CNT-films occured. The combination of the PL data and Raman intensity dependencies of the (6,5)-SWNT-S2-transition at potential changes allowed to define the quenching mechanism of the CNT emission. With the use of a difusion limited contact quenching model from Hertel et al. an inverse square proportionality between the (6,5)-SWNT emission and the charge carrier density was shown. Therefore it was concluded that the reduction and oxidation values obtained by emission changes do not correspond to the bandedges of the CNTs and that a determination of the bandgap should be done through absorption or Raman spectroscopy. The interparticle analysis of the (6,5)-SWNT reduction and oxidation potential sho- wed an absolute potential variation with respect to the reference values. The influences for this changes were classified into two cases: the so called “dispersing agent effects” and the “CNT structure defects”. It was assumed that these were a result of unequal distributed dispersing agents on the CNT surface or defects in the CNT lattice structure. Further, the interparticle determined correlation between reduction and oxidation values was attributed to the “CNT structure defects” and was therefore assumed to exercise the most dominant influence. Conversely, after the investigations of the intraparticle redox potentials, local areas were identified with a dependence to “dispersing agent effects”. In addition the width of the emission decrease as a result of the oxidation or reduction process of the (6,5)-SWNT was analysed. This investigation led to the conclusion that the charge carriers quenching efficiency mainly contributes to the overall width. Beyond that the data indicated that a distribution of 0.32 quenching centers per nanometer is needed for the total quenching of the photoluminescence. In addition to the redox chemistry analysis of pristine (6.5)-SWNTs, the investigation of the dependency in presence of ferrocene molecules showed that the interaction of the herein forming complex is of non-covalent type. This conclusion was based on two facts: on the one hand, the ferrocene molecules desorbed from the CNT surface when the solvent in the microfluidic channel was exchanged with a pure dimethylformamide solution and on the other hand, no permanent decrease in emission intensity due to covalent bond forming was observed. The potential-dependent PL behavior allowed for the assumption of a charge transfer from the adsorbed ferrocene molecules into the optically generated holes in the CNT. Furthermore the experimental data allowed to assume that this charge transfer increases with higher photon flux. With regard to applications with carbon nanotubes for electrolysis and photolysis of water, the redox chemistry of (6,5)-SWNTs was investigated in this solvent. With re- spect to the emission intensity in the organic electrolyte, two effects could be identified which were firstly the overall decrease of the PL, and secondly an irreversible reaction during anodic polarization, which manifested itself by a permanent quenching of the photoluminescence. The reaction conditions were determined with the result that water, optical generated electron-hole pairs and potential induced holes in the valence band formed a [SWNT(Q)] species, which caused the irreversible reduction of the CNT emission. Moreover, the evaluated reaction rate followed pseudo-zero-order kinetics, provided that the just mentioned parameters were constant. The investigation of this [SWNT(Q)] species in a ferrocene solution showed that the quenching effect of these defects was reduced for anodic polarisation by assuming an oxidation of the [SWNT(Q)] species by the Fc+ cations. The CVD apparatus enabled to synthesize carbon nanotubes. Ethanol was used as the carbon source and a mixture of iron and cobalt mixed with a zeolite worked as catalyst. The analysis of the various process parameters showed that the best distribution ratio between the desired (6,5)-SWNTs and other CNT chiralities or amorphous carbon were obtained for T = 750 °C . It was assumed that this behavior is due to the fact that at T < 750 °C burning processes of unwanted amorphous carbon residues only slightly occurred, and that at T > 750 °C the growth mechanism favoured chiralties with larger diameter. By varying the flow rate, only an absolute increase of all chiralities was observed. In this context it should be noted that nevertheless the chirality distribution can be improved to higher yields of (6,5)-SWNTs, by an adaptation of the pressure and temperature during synthesis. The experiments which investigated the impact of reaction pressure changes, indicated a relation in accordance to Le Chatelier law. Therefore lower pressure moved the equilibrium towards product formation of the ethanol-cracking reaction, which increased the molecule concentration of ethane, ethylene and methane and the overall CNT yield. However, this caused also an increment of the absolute amorphous carbon concentration. According to that, it was found that a pressure of p = 9 mbar yielded the best (6.5)-SWNT to amorphous carbon ratio. The experiments performed in this thesis allowed to gain new insights about the sensitivity of the emission of (6,5)-SWNTs due to charging. Especially the deter- mination of the correlation between the photoluminescence and charging level of the CNTs will allow for a more selective use of carbon nanotubes – for example in sensors. In this context the analysis of the interparticle redoxpotential distribution showed precisely the effects of solvent and defect densities on the electronic structure of CNTs. Further the reasons for different values of the reduction and oxidation potential, which are found in literature were explained. For the future this information will allow a better selection of the spectroscopic method to determine the band edges of carbon nanotubes. The spectroelectrochemical analysis of the (6,5)-SWNTs in the solvent water and especially the determination of the kinetics for the observed irreversible reaction gave insight in the interaction between water molecules and carbon nanotubes. These results are particularly important, when carbon nanotubes are used as electrode material. For example in the electrochemical and photolytic generation of hydrogen and oxygen of water. Besides the covalent bond forming reaction of (6,5)-SWNTs in water under anodic potential and optical excitation, the non-covalent bonding reaction between ferrocene molecules and SWNTs was shown and analysed. The different impact of these two interaction on the electronic structure could then be demonstrated and explained. KW - Spektroelektrochemie KW - Kohlenstoff-Nanoröhre KW - Redoxpotential KW - Photolumineszenz KW - Einzelmolekülspektroskopie KW - (6,5)-SWNT KW - Spektroelektrochemie KW - Potentialinduzierte Löschung KW - CVD Synthese KW - Raman-Spektroskopie KW - electrochemistry KW - photoluminescence KW - single particle microscopy KW - Raman spectroscopy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112162 ER - TY - THES A1 - Platte, Daniela T1 - Grenzflächenselektive Verkapselung von anorganischen Latentwärmespeichermaterialien mit Hybridpolymeren T1 - Interface-selective encapsulation of inorganic phase change materials with hybrid polymers N2 - Im Rahmen dieser Arbeit wurde ein prinzipieller Zugang zur Mikroverkapselung anorganischer Latentwärmespeichermaterialien (LWS) erarbeitet. Dazu wurden zwei basische, kristallwasserreiche Salzhydrate mit Schmelztemperaturen im Umgebungstemperaturbereich als Kernmaterialien und anorganisch-organische Hybridpolymere mit kovalent verbundenen anorganischen und organischen Struktureinheiten (ORMOCER®e) als Verkapselungsmaterial verwendet. Der Prozess verläuft grenzflächenselektiv in der flüssigen Phase, initiiert durch die basischen LWS, in Form einer auch bei milden Temperaturen ablaufenden Michael-Typ-Addition zwischen Acrylat- (Acr) und Thiolmonomeren (SH). Optimierte Verkapselungsergebnisse wurden mit Hybridmonomeren erreicht, deren funktionelle Gruppen in einem unstöchiometrischen Verhältnis von Acr:SH ≈ 5:1 vorlagen und über das anorganische Rückgrat vorverknüpft waren. Bei Verwendung eines Mikrodosiersystems wurden gleichmäßige, geschlossene Mikrokapseln mit Durchmessern von etwa 40–50 µm bei Schichtdicken von < 5 µm erhalten. Aufgrund einer zu geringen inhärenten Barrierewirkung der verwendeten Hybridpolymere gegenüber Wasserdampf konnten jedoch erhebliche Kristallwasserverluste nicht verhindert werden, sodass die erhaltenen Mikrokapseln noch nicht zur Anwendung als LWS geeignet sind. Da die beobachtete Tolerierung und sogar Bevorzugung für das deutliche Missverhältnis zwischen den polymerisierenden Gruppen für eine Stufenpolymerisation sehr ungewöhnlich ist, wurden an Modellsystemen Untersuchungen zur Aufklärung des Reaktionsmechanismus vorgenommen. Dazu wurde zunächst ein Mercaptosiloxan (MS) hergestellt, dessen Ringgrößen- bzw. Funktionalitätsverteilung mittels 29Si-NMR- und GPC-Messungen sehr gut aufgeklärt werden konnte. Dieses wurde für Verkapselungsversuche mit Trimethylolpropantriacrylat (TMPTA) kombiniert und das Verhältnis funktioneller Gruppen Acr:SH systematisch variiert. An den erhaltenen Proben konnte via µ-Raman-Tiefenscan-Untersuchungen der Einfluss der Harzzusammensetzung auf die Kapselschichten aufgeklärt werden. Während bei Acr:SH = 1:1 maximale Schichtdicken erhalten wurden, ergaben sich bei Acrylatüberschuss von 4:1 bis 6:1 optimierte Schichten im Sinne der Vorgaben, die gleichmäßig dünn und vollständig waren. Bei Thiolüberschuss wurden dagegen keine vollständig ausgebildeten Schichten erhalten. Das für die LWS-Verkapselungen verwendete Modellsystem TMPTA/MS wurde zusätzlich in Volumenpolymerisationen in homogener organischer Phase untersucht, die mit der Base Triethylamin initiiert wurden. Dabei wurden die stöchiometriebezogenen Vergelungsgrenzen bestimmt. Die detektierte Grenze bei Acr:SH < 5:1 für Acrylatüberschuss lag signifikant unterhalb von Verhältnissen funktioneller Gruppen, für die in Verkapselungsversuchen noch geschlossene Schichten erhalten wurden. Entlang der flüssig-flüssig-Grenzfläche wird somit der Gelpunkt lokal innerhalb eines breiteren Bereichs des Verhältnisses funktioneller Gruppen in der Harzmischung erreicht, als bei einer Polymerisation im gesamten Volumen. Durch weitergehende Untersuchungen zum Vernetzungsverhalten in Abhängigkeit vom Verhältnis funktioneller Gruppen weiterer Acrylat- und Thiolmonomere mit anderen (durchschnittlichen) Funktionalitäten konnte das grundsätzliche Vorliegen eines Stufenmechanismus untermauert werden. Aus einer Kombination der Flory-Stockmayer-Theorie mit der Carothers’schen Gleichung konnten theoretische Vergelungsgrenzintervalle hergeleitet werden. Die experimentell bestimmten Vergelungsgrenzen standen in vollständiger Übereinstimmung mit den theoretisch errechneten Intervallen. Innerhalb des Modellsystems TMPTA/MS konnten zudem weitere Materialeigenschaften bestimmt und zusätzliche Erkenntnisse zum Vernetzungsverhalten gewonnen werden. Durch In-situ-Messungen mittels µ-Raman-Spektroskopie wurde die Entwicklung der Umsetzungsgrade N(C=C) und N(S–H) von Acrylat und Thiol im Verlauf der Reaktionszeit untersucht. Dabei wurden einige Einschränkungen der verwendeten Messmethode identifiziert und beschrieben. Mittels in-situ-mechanischer Spektroskopie nach Chambon und Winter konnte weiterhin das Vergelungsverhalten des Systems in Abhängigkeit von Monomerzusammensetzung, Initiatorkonzentration und Temperatur und Unterschiede innerhalb der kritischen Gele systematisch charakterisiert werden. Die stabilsten kritischen Gele und kürzesten Gelzeiten wurden für hohe Basenkonzentrationen und bei stöchiometrischem Monomerverhältnis, aber auch für Acrylatüberschuss bis Acr:SH = 3:1, erhalten. Damit konnte auch innerhalb der Volumenpolymerisationen eine Bevorzugung des untersuchten Monomersystems für Acrylatüberschuss nachgewiesen werden. Weiterhin wurde das Geschwindigkeitsgesetz der Reaktion aufgeklärt. Es ergab sich bis zum Gelpunkt, zu je erster Ordnung in den beiden Monomeren und der Initiatorbase. Außerdem wurde die Aktivierungsenthalpie der Polymerisation in homogener Phase mittels einer Arrhenius-Auftragung bestimmt. N2 - In the framework of this thesis, an approach to the microencapsulation of inorganic phase change materials (PCM) was developed. Two alkaline salt hydrate mixtures with high amounts of crystal water and melting ranges at ambient temperature were chosen as core materials. These were encapsulated using hybrid polymers, i.e. materials with covalently connected inorganic and organic moieties (ORMOCER®s). The process developed proceeds as a Michael-type addition polymerization of thiol (SH) to acrylate (Acr) monomers, selectively under mild reaction conditions at the liquid-liquid interface, and it is initiated by the PCM core. Best encapsulation results were obtained using hybrid monomers with organic functional groups, being covalently linked via the inorganic backbone, at a ratio of Acr:SH ≈ 5:1. If a microdispenser was employed to dose the PCM, uniform and enclosed microcapsules of 40–50 µm diameter and < 5 µm coating thickness were produced. The achieved encapsulation performance is a promising improvement towards a hermetic microencapsulation of inorganic PCM. However, due to the inherently too high water vapor permeability of the employed hybrid polymers, the capsules loose water gradually. Therefore, this still inhibits an application as PCM materials for ambient temperatures. Since the preference for off-stoichiometric polymerizing groups which was found is exceptional for a step-growth polymerization, the reaction mechanism was further investigated using a model system. For that purpose, a mercaptosiloxane (MS) was synthesized, whose inorganic condensation was almost exhaustive, and the siloxane ring size and SH functionality distribution, respectively, was well ascertainable through 29Si-NMR and GPC measurements. This material was combined with trimethylolpropane triacrylate (TMPTA) for encapsulation experiments, and the ratio Acr:SH was systematically varied. The influence of the resins’ acrylate to thiol ratio on the encapsulation performance was elucidated by µ-Raman depth scan measurements of the resulting capsules. With a stoichiometric ratio of Acr:SH = 1:1, a maximum coating thickness was obtained, but a significant acrylate excess of about Acr:SH = 4:1 to 6:1 yielded optimized results with respect to the applications requirements: even, thin, and complete coatings. In contrast, no homogeneous coatings were attained with thiol excess in the material. The model system TMPTA/MS was also employed for bulk polymerizations in a homogeneous organic medium, initiated by triethylamine, which allowed the detection of the critical molar ratios (CMR) of TMPTA/MS. The experimental CMR for acrylate excess at Acr:SH < 5:1 was significantly lower than molar ratios that allowed complete PCM capsule coatings. Therefore, the local CMR at the liquid-liquid phase boundary appeared to be considerably enlarged compared to the polymerization in bulk. In the framework of this thesis, an approach to the microencapsulation of inorganic phase change materials (PCM) was developed. Two alkaline salt hydrate mixtures with high amounts of crystal water and melting ranges at ambient temperature were chosen as core materials. These were encapsulated using hybrid polymers, i.e. materials with covalently connected inorganic and organic moieties (ORMOCER®s). The process developed proceeds as a Michael-type addition polymerization of thiol (SH) to acrylate (Acr) monomers, selectively under mild reaction conditions at the liquid-liquid interface, and it is initiated by the PCM core. Best encapsulation results were obtained using hybrid monomers with organic functional groups, being covalently linked via the inorganic backbone, at a ratio of Acr:SH ≈ 5:1. If a microdispenser was employed to dose the PCM, uniform and enclosed microcapsules of 40–50 µm diameter and < 5 µm coating thickness were produced. The achieved encapsulation performance is a promising improvement towards a hermetic microencapsulation of inorganic PCM. However, due to the inherently too high water vapor permeability of the employed hybrid polymers, the capsules loose water gradually. Therefore, this still inhibits an application as PCM materials for ambient temperatures. Since the preference for off-stoichiometric polymerizing groups which was found is exceptional for a step-growth polymerization, the reaction mechanism was further investigated using a model system. For that purpose, a mercaptosiloxane (MS) was synthesized, whose inorganic condensation was almost exhaustive, and the siloxane ring size and SH functionality distribution, respectively, was well ascertainable through 29Si-NMR and GPC measurements. This material was combined with trimethylolpropane triacrylate (TMPTA) for encapsulation experiments, and the ratio Acr:SH was systematically varied. The influence of the resins’ acrylate to thiol ratio on the encapsulation performance was elucidated by µ-Raman depth scan measurements of the resulting capsules. With a stoichiometric ratio of Acr:SH = 1:1, a maximum coating thickness was obtained, but a significant acrylate excess of about Acr:SH = 4:1 to 6:1 yielded optimized results with respect to the applications requirements: even, thin, and complete coatings. In contrast, no homogeneous coatings were attained with thiol excess in the material. The model system TMPTA/MS was also employed for bulk polymerizations in a homogeneous organic medium, initiated by triethylamine, which allowed the detection of the critical molar ratios (CMR) of TMPTA/MS. The experimental CMR for acrylate excess at Acr:SH < 5:1 was significantly lower than molar ratios that allowed complete PCM capsule coatings. Therefore, the local CMR at the liquid-liquid phase boundary appeared to be considerably enlarged compared to the polymerization in bulk. Further analysis of experimental CMR values for other acrylate and thiol monomers with different functionalities confirmed the step-growth behavior of the investigated reaction. By a combination of the theoretical CMRSt after Dušek et al., which is based on the Flory-Stockmayer theory, and the Carothers’ equation, theoretical CMR intervals were derived. The experimentally determined CMRs were all located well within these calculated ranges. For the model system TMPTA/MS, further material properties and additional results on the crosslinking performance were achieved. The conversion progress of acrylate and thiol during polymerization was followed via in situ µ-Raman measurements. This also has revealed some limitations of this spectroscopic method which were specified and considered for data evaluation and interpretation. The gelation characteristics and properties of the critical gels as a function of acrylate to thiol ratio, initiator concentration, and temperature were investigated in situ by means of the mechanical spectroscopy approach after Chambon and Winter. Stiffest critical gels and shortest gelation times were detected at high initiator concentrations and for stoichiometric monomer mixtures as well as for acrylate excess up to Acr:SH = 3:1. Thus, it was possible to prove a preference of this monomer system for an acrylate excess also in bulk polymerizations. Furthermore, the overall rate equation for the polymerization of TMPTA and MS was determined to be third order, and first order in each monomer concentration and in the initiator concentration, respectively, up to the gel point. Finally, the activation enthalpy for the bulk polymerization was found to amount to (18,3 ± 0,7) kJ/mol by means of an Arrhenius plot. KW - Stufenwachstums-Polymerisation KW - Verkapselung KW - Grenzflächenreaktion KW - Raman-Spektroskopie KW - Rheologie KW - Sol-Gel-Verfahren KW - Vernetzung KW - Gelpunkt KW - step-growth polymerization KW - encapsulation KW - gel point KW - Raman spectroscopy KW - mechanical spectroscopy Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-74960 ER - TY - THES A1 - Schumm, Marcel T1 - ZnO-based semiconductors studied by Raman spectroscopy: semimagnetic alloying, doping, and nanostructures T1 - Ramanspektroskopische Untersuchung ZnO-basierte Halbleiter: Semimagnetische Legierung, Dotierung und Nanostrukturen N2 - ZnO-based semiconductors were studied by Raman spectroscopy and complementary methods (e.g. XRD, EPS) with focus on semimagnetic alloying with transition metal ions, doping (especially p-type doping with nitrogen as acceptor), and nanostructures (especially wet-chemically synthesized nanoparticles). N2 - ZnO-basierte Halbleiter wurden mittels Ramanspektroskopie und komplementärer Methoden (z.B. XRD, EPS) untersucht mit den Schwerpunkten semimagnetische Legierung mit Übergangsmetallen, Dotierung (vor allem p-Dotierung mit Stickstoff als Akzeptor) und Nanostrukturen (vor allem nass-chemisch hergestellte Nanopartikel). KW - Wide-gap-Halbleiter KW - Würzburg / Sonderforschungsbereich II-VI-Halbleiter KW - Verbindungshalbleiter KW - Zwei-Sechs-Halbleiter KW - Semimagnetischer Halbleiter KW - n-Halbleiter KW - Niederdimensionaler Halbleiter KW - p-Halbleiter KW - Kolloider Halbleiter KW - Magnetisch KW - Ramanspektroskopie KW - Raman KW - Zinkoxid KW - ZnO KW - DMS KW - Raman spectroscopy KW - Raman KW - Zinc oxide KW - ZnO KW - DMS KW - Diluted Magnetic Semiconductors KW - doping KW - secondary phases Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-37045 ER - TY - THES A1 - Gigant, Karine T1 - Raman-Spektroskopie hybridpolymerer Sol-Gel-Materialien : vom Sol bis zur Schicht T1 - Raman spectroscopy of hybrid polymeric sol-gel materials: from the sol to the coating N2 - In der vorliegenden Arbeit wurden durch den Sol-Gel-Prozeß hergestellte hybride Sole, Xerogele und Schichten mit Hilfe der Raman-Spektroskopie untersucht. Dazu wurden zunächst die schwingungsspektroskopischen Zuordnungen für verschiedene Alkoxysilanen ergänzt und zusammengefasst. Anschließend wurde die Hydrolyse vom Vinyltriethoxysilan (VTES) durch FT-Raman-Spektroskopie vom Sol bis zum Xerogel verfolgt. Weitere Untersuchungen an verschiedenen Xerogelen lieferten neue Erkenntnisse über charakteristische Raman-Banden des anorganischen Netzwerkes. Der zweite Teil dieser Arbeit richtete sich auf konfokale Raman-mikrospektroskopische Untersuchungen hybrider Schichten bezüglich der anorganischen und organischen Vernetzung. Zunächst wurden Polymersubstrate untersucht. Es wurde experimentell festgestellt, dass die axiale Auflösung eines konfokalen Raman-Mikrospektrometers tatsächlich niedriger ist als bisher in der Literatur angenommen wurde. Bei Mikro-Raman-Untersuchungen an verschiedenen Schichtsystemen hat sich herausgestellt, dass die Schwingungsmoden des anorganischen Netzwerks im niederfrequenten Raman-Bereich leicht detektierbar sind. Die Lage der charakteristischen sogenannten T3/Q3-Bande im Raman-Spektrum der UV-gehärteten Probe deutet allerdings auf einen niedrigeren Kondensationsgrad hin, als beim langsam luftgetrockneten Xerogel, was mit Hilfe von 29Si-Festkörper-NMR-Messungen bestätigt wurde. Darüber hinaus konnte festgestellt werden, dass die Schichten einen höheren Kondensationsgrad als die gleich behandelten Volumenproben aufweisen. Es wurde gezeigt, dass die gewonnenen Raman-spektroskopischen Erkenntnisse für die Erforschung und die Lösung von Vernetzungsproblemen hilfreich sein können. Nach einem kurzen Überblick der Mechanismen der organischen Vernetzung wurden zunächst thermisch-hartbaren Schichtsysteme auf Glycidyloxypropyltrimethoxysilan-Basis durch Raman-Mikrospektroskopie untersucht. Die quantitative Auswertung des Umsetzungsgrades erfolgte nach einer Bandenanalyse der Ringatmungsschwingung des Epoxidrings. Es stellte sich heraus, dass die Polyadditionsreaktion nur sehr begrenzt stattfindet. Dagegen ist die Anhydridhärtung unter den gleichen Bedingungen deutlich effizienter. Daneben wurde gezeigt, dass die an Volumenproben erhaltenen Ergebnisse, in Bezug auf die organische Vernetzung, nicht auf die entsprechenden Schichten übertragen werden können. Bei den untersuchten UV-härtbaren Schichtsystemen konnte der Umsetzungsgrad mittels einer Bandenanalyse der reaktiven Gruppen erfolgreich ermittelt werden. Die Reaktivität der ungesättigten Gruppen, wenn sie einer radikalischen Polymerisation ausgesetzt sind, folgt der Reihe: Allyl < Vinyl < Acrylat. Die Thiol-En-Addition bei den VTES / Mercaptopropyltrimethoxysilan-Schichtsystemen führt zu höheren Umsetzungsgraden der Vinylgruppen bei gleichen Bedingungen. Die Kinetik der Polymerisationsreaktion spielt also eine entscheidende Rolle bei der Vollständigkeit der organischen Vernetzung. Ein weiterer Teil dieser Arbeit richtete sich auf die Ermittlung der mechanischen Eigenschaften von hybriden Schichten und deren Korrelation mit spektroskopischen Daten. In allen untersuchten Schichtsysteme demonstrierte die chemische Variation der beteiligten Komponenten, dass die organische Vernetzung und das anorganische Netzwerk stark miteinander wechselwirken. Somit ensteht ein Synergieeffekt, welcher der hybridpolymeren Schicht ihre mechanische Beständigkeit verleiht. Schließlich stellte sich heraus, dass die Mikrohärte mit den spektroskopischen Daten verknüpft werden kann. Bei allen Schichtsystemen zeigte sich eine starke Abhängigkeit von Mikrohärte und Härtungsdauer. Alle thermisch gehärteten Schichten weisen eine sehr hohe Abriebfestigkeit sowie eine sehr gute Adhäsion auf Glas und Kunststoff auf, was ihren Einsatz als kratzfeste Schichten nahelegt. Die UV-härtbaren Schichtsysteme weisen zwar eine hohe Abriebfestigkeit auf, haften aber schlecht auf Polycarbonaten (PC). Die haftungs- / enthaftungsrelevanten Vorgänge spielen sich an der Grenzflächen oder einer Interphase geringer Ausdehnung statt und können daher Raman-miskrospektroskopisch nicht erfasst werden. TEM-Aufnahmen zeigten deutlich, dass die schlechte Haftung auf PC auf die unzureichende Benetzung der Schicht auf dem Substrat zurückzuführen ist. Weiterhin konnte festgestellt werden, dass der Zusatz von einem Acrylat als Additiv zur Bildung einer Interdiffusionsschicht führt, die die Haftung auf PC verbessert. Die Untersuchungen der Bewitterungsbeständigkeit beschränkten sich auf zwei UV-härtbare Schichtsysteme. Die Mikro-Raman-Spektren zeigten, dass zunächst die organischen Komponenten der hybriden Schicht angegriffen und geschädigt werden. Der Schutzeffekt von Lichtstabilisatoren und UV-Absorbern auf die organischen Komponenten des hybriden Netzwerks konnte ebenfalls spektroskopisch bestätigt werden. N2 - The present work deals with the Raman spectroscopic study of hybrid coating formulations prepared by the sol-gel process. First vibrational spectroscopic assignments for several alkoxysilanes were completed and presented. The hydrolysis of vinyltriethoxysilane (VTES) was followed from the sol to the xerogel state by means of FT-Raman spectroscopy. New insights about characteristic Raman bands of the inorganic network were gained from further investigations. The second part of this work deals with the confocal Raman microscopic study of the inorganic condensation and organic cross-linking of hybrid coatings. For this purpose several polymeric substrates were studied. It was experimentally demonstrated that the axial resolution of the confocal Raman microspectrometer is actually lower than usually claimed in the literature. The confocal Raman microscopic study of different coating systems showed that the vibrational modes of the inorganic network may be easily detected in the low wavenumber region. The position of the characteristic so-called T3/Q3 band for the UV-cured samples indicates a lower inorganic condensation as compared to the air-dried xerogel. This was confirmed by means of the corresponding 29Si solid state NMR spectra. Besides, it was shown that the degree of condensation is higher in the coatings as in the bulk samples. The Raman microscopic measurements may help to investigate and solve the condensation problems during development of coating sols. After a reminder of the mechanisms involved in the organic cross-linking of epoxy-based systems, the thermally cured coating system containing Glycidyloxypropyltrimethoxysilane (GPTMS) was first studied. The analysis of the characteristic ring-breathing mode of the epoxy groups was used to calculate the conversion of the epoxy groups. The conversion of the epoxy groups through a thermal polyaddition was found to be very low. In contrast to that, the thermal curing in the presence of an anhydride was much more efficient under the same conditions. Furthermore it must be pointed out that the state of condensation and organic cross-linking in thin coatings must not be derived from the spectral results obtained for the corresponding bulk samples. The conversion of the unsaturated groups may be calculated for all UV-curable coating systems with the help of their corresponding Raman bands. The reactivity of the unsaturated groups towards radical polymerisation was found to follow the series: allyl < vinyl < acrylate. In comparison, the thiol / ene addition (VTES / Mercaptopropyltrimethoxysilane coatings) leads to a higher conversion degree of the vinyl groups under the same curing conditions. This result shows that the kinetics of the polymerisation reaction employed has a decisive influence on the completeness of the organic cross-linking. A further part of this work aimed at the investigation of the mechanical properties of the hybrid films. It was proceeded with some variation of the chemical formulation, which finally revealed a strong coupling effect existing between organic cross-linking and inorganic network. This synergic effect is undoubtedly responsible for the mechanical resistance of the hybrid coatings. Finally, it was found that the micro-hardness may be correlated with the Raman spectroscopic data, the quantitative estimation of the organic cross-linking degree beeing a function of the curing conditions and chemistry for any studied hybrid coating system. A strong dependence between the micro-hardness and the curing time was noted. All the thermally curable coatings were highly resistant against abrasion and generally possess very good adhesion properties on glass and plastic, so that they have a great potential for scratch-resistant coating applications. UV-curable coating systems, while having a good abrasion resistance as well, showed poor adhesion on polycarbonate (PC). Adhesion relevant processes occur at the interface or in a region of small dimension, thus are not accessible through Raman microspectroscopy. The TEM micrographs showed that the lack of adhesion on polycarbonate was essentially due to the poor wettability of the coating sol on the polycarbonate substrate. The TEM micrographs of coating systems containing an acrylated additive showed the presence of an interpenetrating layer that is considered to be responsible for the good adhesion on polycarbonate. The investigations on the weathering stability of the hybrid coatings were restricted to two UV-curable coating systems. The micro-Raman spectra showed that mainly the organic cross-links would be affected and damaged through the accelerated weathering. The addition of light stabilizers and UV-absorbers clearly lead to a protection of the organic cross-links of the hybrid coatings as shown spectroscopically. KW - Sol-Gel-Verfahren KW - Raman-Spektroskopie KW - Raman-Spektroskopie KW - konfokale Raman-Mikroskopie KW - Sol-Gel KW - Alkoxysilane KW - funktionelle Schichten KW - Raman spectroscopy KW - confocal Raman microscopy KW - sol-gel KW - alkoxysilanes KW - functional coatings Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14994 ER - TY - THES A1 - Dem, Claudiu Dorin T1 - Design and construction of a device for light scattering studies on airborne particles T1 - Entwurf und Aufbau von ainem Aerosolanalysegerät N2 - This thesis is concerned with the development of an on-line in-situ device for a chemical characterisation of flowing aerosols. The thesis describes the principles and most important features of such a system, allowing also on-line measurements using Raman spectroscopy as a diagnostic technique An analysis of the effect of forced oscillations on the motion of the particle dispersed in a gas flow is given in Chapter 2. Also the most important particle parameters are introduced. A review of the particle/fluid interaction in laminar air flows and the response of the particle is presented. In Chapter 3 the behaviour of the particle under different external conditions (ion bombardment and electric fields) is extended. A brief review of the most important particle charging theories (diffusion, field, and alternating potential charging) shows, that the effect of the electrical properties (represented by the dielectric constant) of the particles affects the charging process. A non-contact method for particle charge measurement was also presented. In the second part of the chapter, the interaction between the electric field and the charged particle for the purpose of particle trapping is illustrated. The most common systems like the two or four ring electrodynamic balance and the quadrupole trap are pointed out. In Chapter 4 a short review of the possibility of using scattered light to study aerosol particles is presented. First, the conditions and the facilities of using the Mie theory for particle size and refractive index determination are mentioned, then some features concerning the classical treatment of the Raman effect are presented Supported by the theoretical considerations exposed in Chapter 2, 3, and 4 the construction and the tests of different devices are presented in Chapter 5. Following the goal of the thesis, first an overview of the used materials and methods for particle generation is presented. Then, the constructed charging devices are described (from the mechanical and electrical point of view) and compared by measuring the acquired charge on the particle. Charged particles can be trapped in different containers. Two types of axially symmetric electrodynamic balances (two ring or an extended four ring configuration) were presented. For a deeper understanding these systems were studied using analytic and numerical methods. Considering the presented purpose of the work another type of trapping system has been developed, namely the quadrupole trap. A similar theoretical characterisation (in term’s of Mathieu equation) as for the electrodynamic balance was presented pointing out some specific features of this system. The incoming particle stream will be focused to the centre of the system simultaneously also the applied DC and AC potential onto the tube electrodes, yields a stable trapping of one or more particles. Chapter 6 consists of two parts: the system for single particle and for many particles investigation. The individual devices presented in Chapter 5 are now put together. The first part presents the method and the experimental realisation of a set-up for solid particle injection. In order to suppress the phase injection disadvantage found for the electrodynamic balance a developed program processes the information obtained from a particle cloud through an adequate electronic detection system, and reduces the number of particles until just one single particle is trapped. The method for one particle investigation can be extended for many particles. Using the presented set-up the particles are moved from one quadrupole to another and transformed from a particle cloud to a particle stream. A linearity between an external vertical mounted detector and the formed image of the particle stream on the CCD camera has been observed and used for simultaneous detection of many particles by Raman spectroscopy. For both methods Raman results are presented. One limitation of Raman Spectroscopy is the relatively long integration time needed for adequate signal-to-noise ratio. There are two factors which influence the integration time: first the incident radiation and the detector sensitivity, and second the intensity of the Raman bands. Using a CCD detector, the desired detector sensitivity should be achieved. So, the improvement of the signal-to-noise ratio should be the next goal in the system development. In order to reduce the integration time an optical system including optic fibres and the integration of an FT-Raman module operating in the visible region is planed. The goal of this work was to develop and construct an instrument for on-line in-situ single particle investigation by Raman spectroscopy. With the presented experimental set-up and the developed program the purpose of the work, the on-line in-situ near atmospheric pressure aerosol investigation was achieved. The Raman spectroscopy has been used successfully for a chemical characterisation of the aerosol particles. N2 - Diese Arbeit beschäftigt sich mit dem Aufbau eines on-line in-situ Analysegerätes zur chemische Charakterisierung von Aerosolen in Luftströmungen. Die Arbeit beschreibt neben den Grundlagen die wichtigsten Eigenschaften eines solchen Systems für on-line Messungen, das die Raman-Spektroskopie als eine Diagnosetechnik einsetzt. Kapitel 2 beinhaltet eine Analyse der Effekte von erzwungenen Oszillationen auf die Bewegung dispergierter Teilchen im Gasfluss. Dort werden auch die wichtigsten Eigenschaften von Partikeln vorgestellt. Es wird ein Überblick über die Teilchen-Gas Wechselwirkungen in laminarer Strömung gegeben, und die Reaktion des Teilchens in Abhängigkeit von Veränderungen (Kräften) wird diskutiert. In Kapitel 3 wird das Verhalten von Teilchen unter verschiedenen externen Bedingungen (Ionenbeschuss oder elektrisches Feld) weiter erörtert. Ein kurzer Überblick über die wichtigsten Theorien zur Teilchenladung (Diffusions-, Feld-, und alternierende Potentialaufladung) zeigt, dass die elektrischen Eigenschaften (dargestellt durch die dielektrische Konstante) des Teilchens den Ladungsprozess beeinflussen. Darüber hinaus wird eine kontaktlose Messmethode für die Ladung der Teilchen diskutiert. Im zweiten Teil des Kapitels wird die Wechselwirkung zwischen dem elektrischen Feld und dem geladenen Teilchen erläutert, zu dem Zweck, dass man die Teilchen ’’einfängt’’. Die gängigen Systeme wie z.B. die elektrodynamische Waage mit zwei oder vier Ringen und die Quadrupolfalle werden ebenfalls diskutiert. In Kapitel 4 werden die Möglichkeiten zur Untersuchung von Teilchen durch um Analyse des gestreuten Lichts vorgestellt. Zunächst werden die Bedingungen und Möglichkeiten für die Eignung der Mie-Theorie zum Studium von Partikelgröße und Brechungskoeffizient diskutiert; des weiteren wird auf die Eigenschaften des klassischen Raman-Effektes eingegangen. In Kapitel 5 wird die Konstruktion und anschließende Erprobung von Geräten beschrieben. Der Aufbau dieser Geräte erfolgte mit Hilfe der theoretischen Erwägungen aus den Kapiteln 2, 3 und 4. Es wird ein Überblick über die verwendeten Materialien und Methoden für die Teilchenerzeugung gegeben. Dann werden die entwickelten Ladegeräte beschrieben (vom mechanischen und elektronischen Standpunkt aus gesehen), und sie werden untereinander verglichen, indem die erzielte Ladung auf den Teilchen gemessen wird. Geladene Teichen können in verschiedenen Anordnungen gefangen werden. Zwei Arten von achsensymmetrischen elektrodynamischen Waagen (Zwei-Ring- oder eine erweiterte Vier-Ring-Konfiguration) werden vorgestellt. Für ein besseres Verständnis wurden diese Systeme durch analytische und numerische Methoden untersucht. In Anbetracht der Ziele dieser Arbeit wurde eine andere Art von Fangsystem entwickelt, die sogenannte Quadrupolfalle. Eine ähnliche theoretische Charakterisierung wie im Falle der elektrodynamischen Waage wurde vorgenommen und verschiedene spezifische Eigenschaften des Systems dargelegt. Der ankommende Teilchenfluss wird in die Mitte des Systems fokussiert, und unter Berücksichtigung des DC-Potentials auf den Rohrelektroden erhält man ein stabiles „Trapping“ eines oder mehrerer Teilchen. Kapitel 6 beschreibt die Experimentalaufbauten für die Untersuchung von einem oder von mehreren Teilchen. Die einzelnen Geräte, die in Kapitel 5 vorgeführt wurden, werden jetzt zusammengesetzt. Der erste Teil des Kapitels stellt die Methode und den experimentellen Aufbau für die Injektion von Feststoffteilchen vor. Um dem Nachteil der Phaseninjektion im Falle der elektrodynamischen Waage entgegenzukommen, wurde ein Programm entwickelt, das die Informationen (aufgenommen durch ein elektronisches Detektionssystem) von einer Teilchenwolke verarbeitet und das die Zahl der Teilchen reduziert, bis nur ein einziges übrig bleibt. Die Methode für die Ein-Teilchen-Untersuchung kann auch für mehrere Teilchen erweitert werden. Unter Verwendung des beschriebenen Systems werden die Teilchen aus einem Quadrupol in einen anderen bewegt und von einer Teilchenwolke in einen Teilchenstrom umgewandelt. Es wurde eine Linearität zwischen einem extern montierten Detektor und der Abbildung des Teilchenflusses durch ein Spektrometer auf einer CCD-Kamera festgestellt, welche für die gleichzeitige Detektion von mehreren Teilchen mittels Raman-Spektroskopie genutzt wurde. Für beide Methoden werden Raman-Ergebnisse gezeigt. Eine Einschränkung bei der Anwendung der Raman-Spektroskopie besteht in den relativ langen Integrationszeiten, die für ein ausreichendes Signal-Rausch-Verhältnis gebraucht werden. Es gibt zwei Faktoren, die die Integrationszeit beeinflussen: (1) die einfallende Strahlung und die Detektorempfindlichkeit und (2) die Frequenz und die Intensität der Raman Banden. Durch Verwendung eines CCD-Detektors kann die gewünschte Detektorsensitivität erreicht werden. Der nächste Schritt in der Systementwicklung ist die Verbesserung des Signal-Rausch-Verhältnisses. Um die Integrationszeit zu verkürzen, ist für zukünftige Arbeiten ein optisches System geplant, das optische Fasern und den Einbau eines FT-Raman-Moduls im sichtbaren Bereich einschließt. Das Ziel dieser Arbeit war die Entwicklung und der Aufbau eines Geräts zur on-line in-situ Untersuchung eines einzelnen Teilchens mit Hilfe der Raman-Spektroskopie. Durch den vorgestellten experimentellen Aufbau und das entwickelte Steuerungsprogramm konnte das Ziel der Arbeit, die in-situ Untersuchung von Aerosolen bei normalem Luftdruck, erreicht werden. Die Raman-Spektroskopie wurde erfolgreich zur chemischen Charakterisierung von Aerosolen eingesetzt. KW - Aerosol KW - Chemische Analyse KW - Raman-Spektroskopie KW - Schwebeteilchen KW - Elektrodynamische Falle KW - Raman Spektroskopie KW - Airborne particles KW - Electrodynamic trap KW - Raman spectroscopy Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9605 ER - TY - THES A1 - Petry, Renate T1 - Spektroskopische Strukturanalytik synthetischer Polypeptide T1 - Structural Analysis of Synthetic Polypeptides by Optical Spectroscopy Methods N2 - In der vorliegenden Arbeit wurden zwei spektroskopische Methoden (Raman- und Circulardichroismus-Spektroskopie) und die Kernspinresonanz zur Untersuchung der Sekundärstruktur von synthetischen Polypeptiden eingesetzt. Dabei wurden die Struktur-Funktions-Beziehungen der dritten extrazellulären Schleife des Gonadotropin-freisetzenden Rezeptors (GnRH-R) untersucht. Die spektroskopischen Ergebnisse belegten, dass die zuvor getroffene Aussage über eine vorhandene helikale Struktur revidiert werden musste. Die Strukturanalysen mit Hilfe der CD-, Raman- und 2D NMR-Experimente an zwei Serien von Polypeptiden lieferten Aussagen über die Sekundärstruktur. Insbesondere die Raman-Untersuchungen in Verbindung mit einer statistischen Datenanalyse lieferten detaillierte Information über subtile Konformationsänderungen, die einerseits durch die Addition und andererseits durch die Substitution einzelner Aminosäuren in den synthetischen Polypeptiden ausgelöst wurden. Anhand der ausgewählten Raman-Linien konnte nachgewiesen werden, dass sowohl die Änderungen der Polypeptidkettenlänge als auch die Änderung der Polypeptidsequenzen mit den beobachteten Intensitäten der Raman-Linien korreliert sind. KW - Synthetische Polypeptide KW - Strukturaufklärung KW - Raman-Spektroskopie KW - Synthetische Polypeptide KW - Sekundärstruktur KW - Proteindesign KW - Raman-Spektroskopie KW - Prolin KW - G-Protein-gekoppelter Rezeptor KW - synthetic polypeptides KW - secondary structure KW - protein design KW - Raman spectroscopy KW - proline KW - G protein-coupled receptor Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-664 ER -