TY - THES A1 - Griesbeck, Stefanie Ingrid T1 - A Very Positive Image of Boron: Triarylborane Chromophores for Live Cell Imaging T1 - Ein sehr positives Bild von Bor: Triarylboran Farbstoffe für Lebendzellenmikroskopie N2 - Efficient quadrupolar chromophores (A–pi–A) with triarylborane moieties as acceptors have been studied by the Marder group regarding their non‐linear optical properties and two‐photon absorption ability for many years. Within the present work, this class of dyes found applications in live‐cell imaging. Therefore, the dyes need to be water‐soluble and water‐stable in diluted aqueous solutions, which was examined in Chapter 2. Furthermore, the influence of the pi‐bridge on absorption and emission maxima, fluorescence quantum yields and especially the two-photon absorption properties of the chromophores was investigated in Chapter 3. In Chapter 4, a different strategy for the design of efficient two‐photon excited fluorescence imaging dyes was explored using dipoles (D–A) and octupoles (DA3). Finding the optimum balance between water‐stability and pi‐conjugation and, therefore, red‐shifted absorption and emission and high fluorescence quantum yields, was investigated in Chapter 5 N2 - Effiziente quadrupole Farbstoffe (A–pi–A) mit Triarylboraneinheiten als Akzeptoren wurden innerhalb der letzten Jahre von der Arbeitsgruppe Marder bezüglich ihrer nicht‐linearen optischen Eigenschaften und Zweiphotonenabsorptionsfähigkeiten untersucht. In der vorliegenden Arbeit wurde diese Farbstoffklasse zur Untersuchung lebender Zellen mittels Fluoreszenzmikroskopie angewendet. Hierzu müssen die Farbstoffe wasserlöslich und in verdünnten wässrigen Lösungen stabil sein. Dies wurde in Kapitel 2 untersucht. Außerdem wurde der Einfluss der pi‐Brücke auf das Absorptions‐ und Emissionsmaximum, die Fluoreszenzquantenausbeute und vor allem die Zweiphotonenabsorptionsfähigkeit untersucht (Kapitel 3). In Kapitel 4 wurden andere molekulare Designstrategien verfolgt um effiziente Zweiphotonenangeregtenfluoreszenzfarbstoffe zu erhalten. Dazu zählen die Strukturmotive des Dipols (D–A) und des Oktupols (DA3). Bestandteil des Kapitels 5 war die Optimierung zwischen Wasserstabilität und pi‐Konjugation und eine damit verbundene rotverschobene Absorption und Emission, sowie eine hohe Fluoreszenzquantenausbeute KW - Borane KW - Bor KW - Lumineszenz KW - Fluoreszenz KW - Zweiphotonenabsorption KW - imaging KW - luminescence KW - fluorescence KW - two-photon absorption KW - borane Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-179921 ER - TY - THES A1 - Dannenbauer, Nicole T1 - Koordinationspolymere und -verbindungen mit intrinsischer Lumineszenz auf Basis von Selten-Erd-Chloriden, Thiazol, Thiolaten und Amin-Co-Liganden T1 - Coordination polymers and compounds with intrinsic luminescence based on rare earth chlorides, thiazole, thiolates and amine co-ligands N2 - In dieser Arbeit konnten 69 neue und neuartige Koordinationspolymere sowie Komplexe mit schwefelhaltigen Liganden auf Selten-Erd-Chlorid-Basis synthetisiert und strukturell charak-terisiert werden. Durch die Umsetzung der Chloride mit dem Liganden Thiazol konnten bei Raumtemperatur, abhängig vom Ionenradius und der eingesetzten Menge Thiazol, sowohl Koordinationspolymere wie 1∞[LnCl3(thz)6]·thz (Ln = La, Ce), dimere Komplexe [Ln2Cl6(thz)8]·3(thz) (Ln = La, Ce, Pr, Nd), [Pr2Cl6(thz)8] sowie monomere Komplexe [LnCl3(thz)4]2·thz (Ln = Sm , Eu , Tb, Ho) erhalten werden. Mittels temperaturabhängiger Pulverdiffraktometrie und in-situ Infra-rotspektroskopie sowie DTA/TG-Messungen konnte exemplarisch an 1∞[LaCl3(thz)6]·thz und [Pr2Cl6(thz)8] gezeigt werden, dass stufenweise thermisch bedingt Thiazolmoleküle aus den Strukturen abgegeben werden bis hin zur Rückbildung des eingesetzten LnCl3. Unter der Vo-raussetzung, dass die flüchtige Komponente Thiazol resorbiert wird, ist daher ein Kreispro-zess denkbar. Ferner konnten zusätzlich wasserhaltige Phasen wie der vierkernige Cluster [Pr4Cl10(OH)2(thz)8(H2O)2] erhalten werden. Durch die Zugabe eines geeigneten Linkermoleküls in das Reaktionssystem aus trivalenten Lanthanidchloriden und Thiazol konnten unter solvothermalen Bedingungen eine Vielzahl an Koordinationspolymeren und Komplexen erhalten werden. Als Linker oder als end-on Ligan-den eigneten sich sowohl eine Reihe an ditopischer Pyridylliganden 4,4'-Biypridin (bipy), 1,2-Di-(4-pyridyl)ethen (dpe), trans-1-(2-Pyridyl)-2-(4-pyridyl)ethylen (tppe), 1,2-Di-(4-pyridyl)ethan (dpa), sowie die Diazine Pyrazin (pyz) und Pyrimidin (pym) oder auch Azole wie 1,2,4-Triazol (tzH) und Pyrazol (pzH). Mittels Einkristallstrukturanalyse und pulverdiffrakto-metrischer Methoden konnten die dreidimensionalen Gerüstverbindungen 3∞[LnCl3(dpa)2]·thz (Ln = Ce - Sm, Gd - Lu), die Schichtstrukturen 2∞[Ln2Cl6(bipy)3(thz)2]·thz (Ln = La, Ce), 2∞[LnCl3(tzH)2(thz)]·thz (Ln = Pr, Sm - Gd) und die strangartigen Koordinationspolymere 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Pr, Nd), 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Sm, Eu - Er, Yb), 1∞[Ln2Cl6(dpe)2(thz)4]·dpe (Ln = Ce, Nd), 1∞[LnCl3(dpe)(thz)2]· 0.5 (dpe) 0.5 (thz) (Ln = Sm, Gd - Dy, Er, Yb), 1∞[HoCl3(dpe)(thz)2]·thz, 1∞[La2Cl6(dpa)(thz)6], 1∞[Pr2Cl6(pyz) (thz)6], 1∞[Ln2Cl6(tzH)4(thz)2] (Ln = Pr, Sm, Gd) sowie die Komplexe [LnCl3(tppe)2(thz)2] (Ln = Nd, Tb, Ho, Er), [Ln2Cl6(pyz)(thz)6]·2(thz) (Ln = Tb, Er), [Ln2Cl6(pym)2(thz)4] (Ln = Tb , Er), [LnCl3(pzH)3(thz)2] (Ln = Pr, Gd) charakterisiert werden.   Ferner konnten die erhaltenen Verbindungen weitestgehend auf ihre photolumineszenz-spektroskopischen sowie thermischen Eigenschaften hin untersucht werden. Außerdem konn-ten auch durch direkte Schwefelkoordination an die Ln3+-Zentren eindimensionale Koordina-tionspolymere 1∞[PrCl2(amt)(py)3] (amt- = 3-Amino-5-mercapto-1,2,4-triazolat), [HNEt3]1∞[LnCl2(amt)2] (Ln = Ho, Er) und Komplexe [LnCl2(Mbim)(py)3]·py (Ln = Y, Er; Mbim = 2-Mercaptobenzimdiazolat) generiert werden N2 - This thesis deals with the structural characterization of 69 novel coordination polymers and complexes synthesized with sulfur containing heterocyclic ligands and trivalent rare earth chlorides. Depending on the ionic radii of the used lanthanide chloride and the amount of the ligand thiazole coordination polymers as 1∞[LnCl3(thz)6]·thz (Ln = La, Ce), dimeric compounds [Ln2Cl6(thz)8]·3(thz) (Ln = La, Ce, Pr, Nd), [Pr2Cl6(thz)8] and monomeric complexes [LnCl3(thz)4]2·thz (Ln = Sm, Eu , Tb, Ho) were derived at room temperature. Using tempera-ture-dependent powder diffraction methods, in-situ IR-spectroscopy and DTA/TG measure-ments it was demonstrated that there is a stepwise, thermal induced release of thiazole molecules out of the structures to back-formation of crystalline lanthanide chloride in the cases of the coordination polymer 1∞[LaCl3(thz)6]·thz and the dimer [Pr2Cl6(thz)8]. This could be a cyclic process requiring the elusive ligand thiazole to be reabsorbed. Furthermore, hy-drous phases were also obtained like the tetranuclear cluster [Pr4Cl10(OH)2(thz)8(H2O)2]. It was possible to generate a series of various coordination polymers and complexes under solvothermal conditions adding suitable linker molecules into the reaction system of lantha-nide chloride and thiazole. Suitable linkers or end-on ligands are a range of ditopic pyridyl ligands like 4,4'-biypridine (bipy), 1,2-di-(4-pyridyl)ethene (dpe), trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (tppe), 1,2-di-(4-pyridyl)ethane (dpa), diazine as pyrazine (pyz) and pyrimi-dine (pym) as well as azole like 1,2,4-triazole (tzH) and pyrazole (pzH). By single-X-ray struc-ture determination and powder diffraction it was possible to characterize three dimensional networks 3∞[LnCl3(dpa)2]·thz (Ln = Ce - Sm, Gd - Lu), layer structures 2∞[Ln2Cl6(bipy)3(thz)2]·thz (Ln = La, Ce), 2∞[LnCl3(tzH)2(thz)]·thz (Ln = Pr, Sm - Gd) and strand like coordination polymers 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Pr, Nd), 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Sm, Eu - Er, Yb), 1∞[Ln2Cl6(dpe)2(thz)4]·dpe (Ln = Ce, Nd), 1∞[LnCl3(dpe)(thz)2]·0.5 (dpe) 0.5 (thz) (Ln = Sm, Gd - Dy, Er, Yb), 1∞[HoCl3(dpe)(thz)2]·thz, 1∞[La2Cl6(dpa)(thz)6], 1∞[Pr2Cl6(pyz) (thz)6], 1∞[Ln2Cl6(tzH)4(thz)2] (Ln = Pr, Sm, Gd) as well as the complexes [LnCl3(tppe)2(thz)2] (Ln = Nd, Tb, Ho, Er), [Ln2Cl6(pyz)(thz)6]·2(thz) (Ln = Tb, Er), [Ln2Cl6(pym)2(thz)4] (Ln = Tb , Er), [LnCl3(pyr)3(thz)2] (Ln = Pr, Gd). Furthermore, nearly all of the generated structures were investigated with regards to their photoluminescent and thermal properties.   Moreover, one dimensional coordination polymers 1∞[PrCl2(amt)(py)3] (amt- = 3-amino-5-mercapto-1,2,4-triazolate), [HNEt3]1∞[LnCl2(amt)2] (Ln = Ho, Er) and complexes [LnCl2(Mbim)(py)3]·py (Ln = Y, Er; Mbim = 2-mercaptobenzimdiazolate) were obtained by direct coordination of sulfur at Ln3+-centers. KW - Lanthanoide KW - Polymerkomplexe KW - Photolumineszenz KW - Thiolate KW - Thiazole KW - Selten-Erd-Chloride KW - Koordinationspolymere KW - Lumineszenz KW - Thiazol KW - rare earth chlorides KW - coordination polymers KW - luminescence KW - thiazole Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136218 ER - TY - THES A1 - Bissinger, Philipp T1 - Synthese, Struktur und Reaktivität Basen-stabilisierter Borane und Diborene T1 - Synthesis, Structure and Reactivity of Base Stabilized Boranes and Diborenes N2 - Umsetzungen N-heterocyclischer Carbene mit Boranen führen zur Bildung von „Lewis-Säure-Base-Addukten“. In Abhängigkeit des Substitutionsmusters der eingesetzten Borane bzw. Carbene eignen sich die erhaltenen Addukte als Ausgangsverbindungen zur Realisierung verschiedener Strukturmotive. Mit geeigneten Übergangsmetallfragmenten gelingt die Darstellung von sigma-Boran-Komplexen bzw. Basen-stabilisierter Boryl-Komplexe, welche mittels spektroskopischer Methoden sowohl im Festkörper, als auch in Lösung untersucht wurden. Ebenfalls gelingt die Synthese Basen-stabilisierter Borirane und einer tetraedrischen Borid-Spezies. Zudem wird ein selektiver Zugang zu Basen-stabilisierten Diborenen entwickelt, wobei deren Bindungssituation und Reaktivität im Detail diskutiert wird. So kann das B=B-Fragment in polymere Spezies eingebunden werden oder als Ligand an Übergangsmetalle koordinieren. N2 - Reaction of boranes with N-heterocyclic carbenes results in the formation of „Lewis-acid-base-adducts“. Depending on the substitution pattern of the boranes and carbenes, respectively, these adducts represent versatile starting materials for the realization of a diversity of different structural motifs. Treatment with suitable transition-metal fragments for instance afforded sigma-borane complexes and base-stabilized boryl complexes. These species are characterized in the solid state by X-ray diffraction, as well as by spectroscopy in solution. In addition, the synthesis of base-stabilized boriranes and a tetrahedral boride species is described. Moreover, a selective approach for the synthesis of base-stabilized diborenes is developed and their bonding situation and reactivity is studied in detail. Thus, the B=B moiety can be incorporated into polymeric structures or act as a ligand in the coordination sphere of transition-metals. KW - Borane KW - Carbene KW - Lumineszenz KW - Polymere KW - boron KW - inorganic chemistry KW - carbenes KW - luminescence KW - polymers KW - Bor KW - Anorganische Chemie Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-79144 ER -