TY - THES A1 - Klein, Teresa T1 - Lokalisationsmikroskopie für die Visualisierung zellulärer Strukturen T1 - Localization Microscopy for the visualization of cellular structures N2 - Die Einführung der Fluoreszenzmikroskopie ermöglicht es, Strukturen in Zellen spezifisch und mit hohem Kontrast zu markieren und zu untersuchen. Da die Lichtmikroskopie jedoch in ihrer Auflösung begrenzt ist, bleiben Strukturinformationen auf molekularer Ebene verborgen. Diese als Beugungsgrenze bekannte Limitierung, kann mit modernen Verfahren umgangen werden. Die Lokalisationsmikroskopie nutzt hierfür photoschaltbare Fluorophore, deren Fluoreszenz räumlich und zeitlich separiert wird, um so einzelne Fluorophore mit Nanometer-Genauigkeit lokalisieren zu können. Aus tausenden Einzelmolekül-Lokalisationen wird ein künstliches, hochaufgelöstes Bild rekonstruiert. Die hochauflösende Mikroskopie ist grade für die Lebendzell-Beobachtung ein wertvolles Werkzeug, um subzelluläre Strukturen und Proteindynamiken jenseits der Beugungsgrenze unter physiologischen Bedingungen untersuchen zu können. Als Marker können sowohl photoaktivierbare fluoreszierende Proteine als auch photoschaltbare organische Fluorophore eingesetzt werden. Während die Markierung mit fluoreszierenden Proteinen einfach zu verwirklichen ist, haben organische Farbstoffe hingegen den Vorteil, dass sie auf Grund der höheren Photonenausbeute eine präzisere Lokalisation erlauben. In lebenden Zellen wird die Markierung von Strukturen mit synthetischen Fluorophoren über sogenannte chemische Tags ermöglicht. Diese sind olypeptidsequenzen, die genetisch an das Zielprotein fusioniert werden und anschließend mit Farbstoff-gekoppelten Substraten gefärbt werden. An der Modellstruktur des Histonproteins H2B werden in dieser Arbeit Farbstoffe in Kombination mit chemischen Tags identifiziert, die erfolgreich für die Hochauflösung mit direct stochastic optical reconstruction microscopy (dSTORM) in lebenden Zellen eingesetzt werden können. Für besonders geeignet erweisen sich die Farbstoffe Tetramethylrhodamin, 505 und Atto 655, womit der gesamte spektrale Bereich vertreten ist. Allerdings können unspezifische Bindung und Farbstoffaggregation ein Problem bei der effizienten Markierung in lebenden Zellen darstellen. Es wird gezeigt, dass die Beschichtung der Glasoberfläche mit Glycin die unspezifische Adsorption der Fluorophore erfolgreich minimieren kann. Weiterhin wird der Einfluss des Anregungslichtes auf die lebende Zelle diskutiert. Es werden Wege beschrieben, um die Photoschädigung möglichst gering zu halten, beispielsweise durch die Wahl eines Farbstoffs im rotem Anregungsbereich. Die Möglichkeit lebende Zellen mit photoschaltbaren organischen Fluorophoren spezifisch markieren zu können, stellt einen großen Gewinn für die Lokalisationsmikroskopie dar, bei der ursprünglich farbstoffgekoppelte Antikörper zum Einsatz kamen. Diese Markierungsmethode wird in dieser Arbeit eingesetzt, um das Aggregationsverhalten von Alzheimer verursachenden � -Amyloid Peptiden im Rahmen einer Kooperation zu untersuchen. Es werden anhand von HeLa Zellen verschiedene beugungsbegrenzte Morphologien der Aggregate aufgeklärt. Dabei wird gezeigt, dass intrazellulär vorhandene Peptide größere Aggregate formen als die im extrazellulären Bereich. In einer zweiten Kollaboration wird mit Hilfe des photoaktivierbaren Proteins mEos2 und photoactivated localization microscopy (PALM) die strukturelle Organisation zweier Flotillinproteine in der Membran von Bakterien untersucht. Diese Proteine bilden zwei Cluster mit unterschiedlichen Durchmessern, die mit Nanometer-Genauigkeit bestimmt werden konnten. Es wurde außerdem festgestellt, dass beide Proteine in unterschiedlichen Anzahlen im Bakterium vorliegen. N2 - The implementation of fluorescence microscopy enables specific labeling and studying of cellular structures with high contrast. Since light microscopy is limited in its resolution, structural information at the molecular level remains hidden. This barrier, known as diffraction limit, can be circumvented by modern imaging techniques. For this purpose localization microscopy employs photoswitchable fluorophores. The fluorescence of these fluorophores is spatially and temporally separated in order to localize single fluorophores with nanometer precision. From thousands of single-molecule localizations an artificial highresolution image is reconstructed. Super-resolution microscopy is a valuable tool for live-cell observations in order to investigate sub-cellular structures and protein dynamics beyond the diffraction limit under physiological conditions. Both photoactivatable fluorescent proteins and photoswitchable organic fluorophores can be used as labels. Whereas labeling with fluorescent proteins is straightforward to implement, organic fluorophores, however, have the Advantage of a more precise localization due to a higher photon yield. In living cells, labeling of structures with synthetic fluorophores is facilitated by so-called chemical tags. Those are polypeptide sequences that are genetically fused to the target protein and subsequently labeled with dye coupled substrates. In this work, on the basis of the model structure H2B—a histone protein—dyes are identified in combination with chemical tags, that can be successfully used for super-resolution imaging with direct stochastic optical reconstruction microscopy (dSTORM) in living cells. The dyes tetramethylrhodamine, 505 and Atto 655 proved to be particularly suitable, whereby the whole spectral range is represented. However, unspecific binding and dye aggregation can pose a problem for the efficient labeling of living cells. It is shown, that coating the glass surface with glycine successfully minimizes unspecific adsorption of fluorophores. Furthermore the impact of the excitation light on living cells is discussed. Methods are presented to keep photodamage at a minimum, e. g., by choosing a dye within the red excitation range. The feasibility to label living cells with photoswitchable organic fluorophores represents a big asset for localization microscopy, which originally employed dye labeled antibodies. This alternative labeling technique is used in a collaboration to study the aggregation behavior of � -Amyloid peptides, which cause Alzheimer’s disease. By means of HeLa cells, different diffraction limited morphologies of aggregates are revealed. It is thereby shown, that intracellular peptides generate larger aggregates than the ones in the extracellular region. In another collaboration the structural organization of two flotillin proteins in the membrane of bacteria is examined by means of the photoactivatable Protein mEos2 and photoactivated localization microscopy (PALM). These proteins form two clusters with different diameters, which could be determined with nanometer precision. It was also asserted that both proteins exist in unequal numbers within the bacterium. KW - Hochauflösendes Verfahren KW - Zellmarker KW - dSTORM KW - PALM KW - live-cell KW - Hochauflösung KW - Zellmarkierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-99260 ER - TY - THES A1 - Proppert, Sven Martin T1 - Design, implementation and characterization of a microscope capable of three-dimensional two color super-resolution fluorescence imaging T1 - Design, Implementierung und Charakterisierung eines Mikroskops für dreidimensionale zwei Farben superhochauflösende Fluoreszenz-Bildgebung N2 - This thesis reviews the fundamentals of three-dimensional super-resolution localization imaging. In order to infer the axial coordinate of the emission of single fluorophores, the point spread function is engineered following a technique usually referred to as astigmatic imaging by the introduction of a cylindrical lens to the detection path of a microscope. After giving a short introduction to optics and localization microscopy, I outline sources of aberrations as frequently encountered in 3D-localization microscopy and will discuss their respective impact on the precision and accuracy of the localization process. With the knowledge from these considerations, experiments were designed and conducted to verify the validity of the conclusions and to demonstrate the abilities of the proposed microscope to resolve biological structures in the three spatial dimensions. Additionally, it is demonstrated that measurements of huge volumes with virtually no aberrations is in principle feasible. During the course of this thesis, a new method was introduced for inferring axial coordinates. This interpolation method based on cubic B-splines shows superior performance in the calibration of a microscope and the evaluation of subsequent measurement and will therefore be used and explained in this work. Finally, this work is also meant to give future students some guidance for entering the field of 3D localization microscopy and therefore, detailed protocols are provided covering the specific aspects of two color 3D localization imaging. N2 - In dieser Arbeit werden die Grundlagen der dreidimensionalen hochauflösenden Lokalisationsmikroskopie erarbeitet und daraus Spezifikationen für ein geeignetes Mikroskop abgeleitet. Zur Gewinnung der axialen Koordinate der Emission einzelner Farbstoffe wird die Punktspreizfunktion in der Detektion astigmatisch mithilfe einer zylindrischen Linse verändert. Nach einer kurzen Einleitung in die Grundzüge der Optik und der Lokalisationsmikroskopie werden die Ursachen für typische Aberrationen besprochen, wie sie in der 3D-Lokalisationsmikroskopie häufig auftreten. Weiterhin wird der Einfluss dieser Aberrationen auf die erreichbare Präzision und Exaktheit des Lokalisationsprozesses behandelt. Mit dem Wissen aus diesen Überlegungen wurden Experimente entworfen und durchgeführt um die getroffenen Schlussfolgerungen zu validieren und zu demonstrieren, dass das vorgeschlagene Mikroskop dazu in der Lage ist, biologische Strukturen in den drei räumlichen Dimensionen aufzulösen. Weiterhin wird gezeigt, dass beinahe aberrationsfreie Mikroskopie großer Volumina prinzipiell möglich ist. Während der Arbeit an dieser Promotion wurde eine neue Methode zur Gewinnung der axialen Koordinaten eingeführt. Diese auf kubischen B-splines basierende Interpolationsmethode stellte sich als anderen Routinen überlegen in der Kalibration eines Mikroskops und der anschließenden Auswertung von Messungen heraus. Deshalb wird dieses Verfahren in der vorliegenden Arbeit verwendet und erklärt. Da diese Doktorarbeit auch den Anspruch hat, zukünftigen Studenten den Einstieg in die hochauflösende 3D Mikroskopie zu erleichtern, werden abschließend detaillierte Protokolle für spezifische Aspekte der zwei Farben 3D Lokalisationsmikroskopie zur Verfügung gestellt. KW - Dimension 3 KW - aberration KW - Einzelmolekülmikroskopie KW - single molecule microscopy KW - 3D KW - super-resolution KW - Mikroskopie KW - Hochauflösendes Verfahren KW - Aberration Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-107905 ER -