TY - THES A1 - Schmitt, Ulrich T1 - Cyclodextrine als chirale Selektoren in der kapillarelektrophoretischen Enantiomerentrennung T1 - Cyclodextrins as chiral selectors in capillary electrophoretic separation of enaantiomers N2 - Die vielfältigen isomeren Substanzen, die in dieser Arbeit getrennt wurden, zeigen, dass die cyclodextrin-modifizierte Kapillarelektrophorese eine sehr leistungsfähige Technik für die Trennung von Enantiomeren darstellt. Als kritisch erweist sich jedoch das Auffinden des richtigen Cyclodextrins bzw. dessen optimale Konzentration. Die Vorhersagbarkeit dieser Parameter ist noch zu gering, um hier vor den ersten Versuchen alleine anhand der Struktur des Moleküls sichere Aussagen machen zu können. So sind zur Zeit noch Versuchsreihen mit verschiedenen Cyclodextrinen und Bedingungen nötig, wie sie in dieser Arbeit durchgeführt wurden. Für die Zukunft wäre es wünschenswert, durch das Sammeln von mehr Erfahrungen und Ergebnissen, wie sie hier gezeigt wurden, schon möglichst direkt aus den Strukturen der zu trennenden Zielmoleküle eine Aussage über die Beschaffenheit des Cyclodextrins oder der CE-Methode machen zu können. Von sechs verschiedenen schwach basischen Thiobarbituratracematen konnten fünf erfolgreich in ihr Enantiomeren getrennt werden. Unter den fünf erfolgreich getrennt Barbituraten waren zwei am Stickstoff alkyliert und ein weiteres sowohl am Stickstoff als auch am Schwefel. Die Thiobarbiturate, die am Stickstoffatom keinen Substituenten tragen, konnten mit -CD am besten getrennt werden (RS > 6). Hingegen konnte für die beiden nur am Stickstoff alkylierten Barbituratemit mit -CD und HDMS jeweils Auflösungen über RS = 6 erzielt werden. Für den in der Erdbeere vorhandene Schlüsselaromastoff 2,5-Dimethyl-4-hydroxy-3(2H)-furanon, Furaneol, konnte eine CE-Methode entwickelt werden, die es zum einen ermöglicht, die Enantiomere vollständig zu trennen, und zum anderen so beschaffen ist, dass es bei der Trennung selbst zu keiner Racemisierung kommt, wie es bei der bisher verwendeten Gaschromatographie der Fall war. Die CE-Methode machte es erstmalig möglich, die enantioselektive Biosynthese von Furaneol in Erdbeerproteinextrakten nachzuweisen. Zusätzlich wurde noch die Racemisierungsgeschwindigkeit von einem angereichertem Gemisch bei vier verschiedenen pH-Werte getestet, was für weitere Arbeiten mit Furaneol-Proben von Bedeutung ist. Die Racemisierungsgeschwindigkeit erwies sich für den pH-Bereich von 3.8 bis 5 am langsamsten. Im neutralen Bereich wurde die schnellste Racemisierung beobachtet. Bei den Experimenten mit Atropin und dem verwandten Homatropin sollte geprüft werden, ob der Einsatz sulfatierter Cyclodextrine von vier verschiedenen Herstellern zu identischen Ergebnissen führt. Es konnten anhand einer kritischen Trennung gezeigt werden, dass dies nicht der Fall ist. Die Trennleistung der Cyclodextrine in Bezug auf den Vergleich Atropin/Homatropin war hierbei sehr ähnlich. Ein bei diesen Arbeiten zusätzlich entstandener Peak konnte eindeutig einem Zerfallsprodukt des Atropins, der Tropasäure, zugeordnet werden. Mit Hilfe von Experimenten mit den Atropisomeren von 1,1′-Binaphthalin-2,2′-diyl-phosphat sollte erprobt werden, ob eine Charakterisierung von randomisiert substituierter CDs über den durchschnittlichen molekularen Substitutionsgrad (MS) ausreicht, um beim erneuten Einsatz eines vergleichbaren Produktes reproduzierbare Ergebnisse zu bekommen. Die Trennleistung von unterschiedlich randomisiert substituierten acetylierten und methylierten Cyclodextrinen wurde hierzu getestet, und mit der von -CD und Heptakis-(2,3,6-tri-O-methyl)--cyclodextrin, bzw. deren Gemischen in Verhältnis von 1:9 bis 9:1 verglichen. Der Vergleich dieser Messergebnisse führte zu dem Schluss, dass eine einfache Charakterisierung randomisiert substituierter Cyclodextrine über den durchschnittlichen molekularen Substitutionsgrad (MS) nicht ausreicht, um reproduzierbare Ergebnisse beim Einsatz solcher Cyclodextrine zu erreichen. Die Aufnahme von Massenspektren ermöglichte es hingegen, randomisiert substituierte CDs aussagekräftig zu charakterisieren. Will man eine CE-Methode validieren, in der ein randomisiertes Cyclodextrin zu Einsatz kommt, so sollte man dieses mittels Massenspektroskopie charakterisieren und sich dessen bewusst sein, das die Validierung nur für diese eine Charge des Herstellers bzw. für Chargen mit vergleichbaren Massenspektren Gültigkeit besitzt. Für das im Arbeitskreis Bringmann racemisch synthetisierte 2-Hydroxymethyl-1-(2-hydroxy-4,6-dimethoxyphenyl)naphthalin sollte eine Trennmethode für die Atropisomere entwickelt werden, da für die Zukunft eine enantioselektive Synthese geplant ist. Unter Einsatz der chiralen Selektoren Heptakis-(6-sulfato)--CD (HS) und Heptakis-(2,3-di-O-acetyl-6-sulfato)--cyclodextrin (HDAS) konnten zwei Trennmethoden gefunden werden, die bei einer jeweiligen Cyclodextrinkonzentration von 15 mM zu einer guten Trennung der Enantiomeren führte. Dies ermöglicht eine Quantifizierung des Enantiomerenüberschuß (ee) für eine nicht-racemische Syntheseroute. N2 - The manifold of isomeric substances being separated within the frame of this thesis shows the power of cyclodextrin-modified capillary electrophoresis concerning to the separation of enantiomers. The major problem is still to find the appropriate cyclodextrin respectively the optimum concentration. The possibility to predict these parameters only on the basis of the molecule structure is still too small. Thus, it is still necessary, to perform experiments to find the suitable cyclodextrin. It would be desirable for the future, to make this possible by collecting more experiences and information. The enantiomers of five of six weakly basic thiobarbiturates could be successfully separated. Two of these five barbiturates were N-substituted, one N-substituted as well as S-substituted. The three N-substituted thiobarbiturates characterized by phenyl- and ethyl-substituent in five positions being the chiral centre. In the two other molecules the chiral centre is located in the side chain, bound at the five position. Furthermore the dependence of the cyclodextrin concentration on the resolution power of five commercial cyclodextrins could be shown. The concentration leading to the best resolution was varying from the smallest (1 mmol/l) to the highest (18 mmol/l) concentrations which were used. The thiobarbiturates without a substituent at the nitrogen atom could be separated best by using -CD (RS > 6). Whereas the two barbiturates carrying a N-alkyl substituent reach their best resolution with -CD and HDMS (both RS > 6). Beside the absolute maxima local maxima were observed. For the key flavouring substance of the strawberry, 2,5-dimethyl-4-hydroxy-3(2H)-furanon, furaneol, a CE-method was developed, which makes it possible to separate the enantiomers without racemisation, which happens when using gas chromatography. This makes it possible to verify enantioselective biosynthesis of furaneol in strawberry protein extract for the first time. Additional the rate of racemisation of enantiomeric enriched samples at four different pH-values were tested, which is important for further experiments with furaneol. The studies on atropine and the related homatropine were performed to show, whether four sulphated cyclodextrins of four different manufacturers lead to identical results. By means of a critical separation the differences of the resolution powers could be shown. It varies from no resolution over separation 1/3 of the peak to 2/3. The resolution power to the atropine enantiomeres was comparable to the one of homatropine. An additional peak, which was found in the tests, was assigned to a decomposition product of atropine being tropic acid. By means of a study with the atrop-isomers of 1,1′-binaphthalin-2,2′-diyl-phosphate it was checked, whether the characterisation of randomly substituted cyclodextrins via the average molecular degree of substitution (MS) is sufficient to obtain comparable results in CD-modified CE. The resolution power of different randomly substituted acetylated and methylated cyclodextrins were tested and compared to the one of -CD and heptakis-(2,3,6-tri-O-methyl)--cyclodextrin and their mixtures in a ratio of 1:9 to 9:1. The comparison of these results shows, that a simple classification of randomly substituted cyclodextrins by the average molecular degree of substitution (MS) is not sufficient to reproduce the results of measurements done with such kind of cyclodextrins. To validate a CE-method, in which a randomly substituted cyclodextrin is used, a mass spectrum of this cyclodextrin should be recorded and it should be clear, that the validation is effective only for this batch of the producer or for batches which have comparable mass spectra. For 2-hydroxymethyl-1-(2-hydroxy-4,6-dimethoxyphenyl)naphthalin, which was racemically synthesized in the group of Prof. Bringmann, a separation method for the atop-isomers was developed, because a enantioselective synthesis is planed in the future. Using either heptakis-(6-sulfato)--CD (HS) or heptakis-(2,3-di-O-acetyl-6-sulfato)--cyclodextrin (HDAS) as chiral selectors at a cyclodextrin concentration of 15 mM a good separation was obtained. This makes a quantification of the enantiomeric excess (ee) for enantioselective synthesis routes possible. KW - Enantiomerentrennung KW - Kapillarelektrophorese KW - Cyclodextrine KW - Kapillarelektrophorese KW - Cyclodextrin KW - Enantiomere KW - capillary electrophoresis KW - cyclodextrin KW - enantiomer Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-10043 ER - TY - THES A1 - Urlaub, Jonas T1 - Development of analytical methods for the quality assessment of mineral oil based excipients and mechanochemically stressed active pharmaceutical ingredients T1 - Entwicklung analytischer Methoden für die Qualitätsbeurteilung mineralölbasierter Hilfsstoffe und mechanochemisch gestresster Arzneistoffe N2 - For the quality assurance of substances for pharmaceutical use, a variety of analytical techniques are available to address specific analytical problems. In this field of application, liquid chromatography (LC) stands out as the gold standard in the pharmaceutical industry. Various detectors can be employed, which are e.g. based on UV/Vis spectroscopy for the examination of molecules with a chromophore, or mass spectrometry (MS) for structural elucidation of analytes. For the separation of enantiomers, the use of capillary electrophoresis (CE) may be more favorable due to the high separation efficiency and easy-to-use and comparatively inexpensive chiral selectors, in contrast to chiral columns for LC, which are usually very expensive and limited to a restricted number of analytes. For structure elucidation in impurity profiling, one- and multidimensional 1H NMR spectroscopy is a valuable tool as long as the analyte molecule has got nuclei that can be detected, which applies for the magnitude of organic pharmaceutical substances. For the evaluation of the amount of mineral oil aromatic hydrocarbons (MOAH) in various paraffin samples from different suppliers, a straightforward method based on 1H NMR spectroscopy was elaborated. The MOAH/MOSH ratio was used to indicate the amount of MOAH of paraffins and to evaluate the extent of refining. In addition, a representative paraffin sample was measured without sample solvent at high temperatures (about 340 K) to avoid the interfering residual solvent signals in the spectral regions of interest. The results of both methods were in good accordance. Moreover, the 1H NMR results were complemented with the UV measurements from the purity testing of paraffins according to the DAB 8. Correlations of the NMR and UV spectroscopic data indicated a linear relationship of both methods for the determination of MOAH in paraffins. Finally, the 1H NMR data was evaluated by principal component analysis (PCA) to explore differences within the paraffin samples and the spectral regions in the 1H NMR spectrum which are responsible for the formation of groups. It could be found that most variation is due to the MOSH of the paraffins. The PCA model was capable of differentiating between soft, liquid and solid paraffins on the one hand and between natural and synthetic liquid paraffins on the other hand. The impurity profiling of L-ascorbic acid 2-phosphate magnesium (A2PMg) was performed by means of one- and two-dimensional NMR spectroscopy. Several ethylated impurities could be detected, which were likely to be formed during synthesis of A2PMg. The structures of two of the ethylated impurities were identified as ascorbic acid 2-phosphate ethyl ester and ethanol, (residual solvent from synthesis). NMR spectroscopic studies of the fractions obtained from preparative HPLC of A2PMg revealed two additional impurities, which were identified as phosphorylated derivatives of ascorbic acid, ascorbic acid 3,5-phosphate and ascorbic acid 5-phosphate. Solid state mechanochemistry as an alternative approach for stress testing was applied on the drug substances S-Ibuprofen (Ibu) and Clopidogrel (CLP) using a ball mill, in order to study their degradation profile: First, the isomerization of S-Ibu was investigated, which was stressed in the solid state applying several milling frequencies and durations under basic, acidic and neutral conditions. For the separation of Ibu enantiomers, a chiral CE method was developed and validated according to ICH Q2(R1). It was found that S-Ibu is overall very stable to isomerization; it shows minor conversion into the R-enantiomer under basic environment applying long milling times and high frequencies. Last, the degradation profile of clopidogrel hydrogen sulfate (CLP) was investigated, which was stressed in the solid state under various oxidative conditions. An already existing HPLC-UV method was adjusted to sufficiently separate the degradation products, which were characterized by means of UV and MS/(MS) detection. Most of the degradation products identified were already reported to result from conventional CLP stress tests. The degradation profile of CLP was mainly influenced by the material of the milling jar and the type of catalyst used. N2 - Für die Qualitätssicherung von Arznei- und Hilfsstoffen steht eine Vielzahl von analytischen Techniken für spezifische analytische Fragestellungen zur Verfügung. In der pharmazeutischen Industrie hat sich dabei die Flüssigkeitschromatographie als Goldstandard etabliert. Es können verschiedene Detektoren eingesetzt werden, die z. B. auf UV/Vis-Spektroskopie zur Untersuchung von Molekülen mit einem Chromophor oder auf Massenspektrometrie zur Strukturaufklärung von Analyten basieren. Für die Trennung von Enantiomeren kann die Verwendung von Kapillarelektrophorese aufgrund der hohen Trenneffizienz und der einfach zu handhabenden und vergleichsweise preiswerten chiralen Selektoren gegenüber chiralen Säulen in der Flüssigchromatographie bevorzugt sein, die in der Regel sehr teuer und auf eine begrenzte Anzahl von Analyten beschränkt sind. Für die Strukturaufklärung im Rahmen der Erstellung von Verunreinigungsprofilen ist die ein- und mehrdimensionale 1H-NMR-Spektroskopie eine sehr wertvolle Methode, solange das Analytmolekül Kerne besitzt, die der NMR-Spektroskopie zugänglich sind, was für den Großteil der organischen Arznei- und Hilfsstoffe zutrifft. Um die Menge an „mineral oil aromatic hydrocarbons (MOAH)“ in verschiedenen Paraffinproben von unterschiedlichen Herstellern zu bestimmen, wurde eine einfache 1H-NMR-Spektroskopie-Methode erarbeitet. Das Verhältnis von MOAH zu „mineral oil saturated hydrocarbons (MOSH)“ wurde dazu verwendet, um die Menge der MOAH in Paraffinen zu bestimmen und ihren Raffinationsgrad zu beurteilen. Zusätzlich wurde eine repräsentative Paraffinprobe ohne Probenlösungsmittel bei hohen Temperaturen (ca. 340 K) vermessen, um die interferierenden Restlösemittel Signale in den relevanten Spektralbereichen zu vermeiden. Die Ergebnisse beider Methoden stimmten gut überein. Weiterhin wurden die 1H-NMR-Ergebnisse durch die UV-Messungen aus der Reinheitsprüfung von Paraffinen gemäß DAB 8 ergänzt. Korrelationen der NMR- und UV-spektroskopischen Daten wiesen auf eine lineare Beziehung beider Methoden für die Bestimmung der MOAH in Paraffinen hin. Schließlich wurden die 1H-NMR-spektroskopischen Daten mittels Hauptkomponentenanalyse ausgewertet, um Unterschiede innerhalb der Paraffinproben und die für die Gruppenbildung verantwortlichen Spektralbereiche im 1H-NMR-Spektrum zu ermitteln. Es konnte festgestellt werden, dass der Hauptanteil der Varianz auf die MOSH zurückzuführen ist. Das PCA-Modell war dazu in der Lage, zwischen weichen, flüssigen und festen Paraffinen einerseits und zwischen natürlichen und synthetischen flüssigen Paraffinen andererseits zu unterscheiden. Das Verunreinigungsprofil von L-Ascorbinsäure-2-phosphat-Magnesium (A2PMg) wurde mittels ein- und zweidimensionaler NMR-Spektroskopie untersucht. Es konnten mehrere ethylierte Verunreinigungen nachgewiesen werden, die vermutlich während des Syntheseprozesses von A2PMg gebildet wurden. Die Strukturen von zwei der ethylierten Verunreinigungen wurden als Ascorbinsäure-2-phosphat ethylester und Ethanol (Restlösungsmittel aus der Synthese) identifiziert. NMR spektroskopische Untersuchungen der aus der präparativen HPLC von A2PMg erhaltenen Fraktionen ergab zwei weitere Verunreinigungen, die als phosphorylierte Derivate von Ascorbinsäure, Ascorbinsäure-3,5-phosphat und Ascorbinsäure-5-phosphat, identifiziert wurden. Die Festkörper-Mechanochemie als alternativer Ansatz für Stresstests wurde auf die Arzneistoffe S-Ibuprofen und Clopidogrel unter Einsatz einer Kugelmühle angewandt, um deren Abbauprofil zu analysieren: Zunächst wurde die Isomerisierung von S-Ibuprofen (Ibu) untersucht, das im festen Zustand unter Anwendung verschiedener Mahlfrequenzen und -dauern unter basischen, sauren und neutralen Bedingungen gestresst wurde. Für die Trennung der Ibu-Enantiomere wurde eine chirale Kapillarelektrophorese-Methode entwickelt und gemäß ICH Q2(R1) Leitlinie validiert. Es wurde festgestellt, dass S-Ibu insgesamt sehr stabil gegenüber Isomerisierung ist, jedoch unter basischen Bedingungen und hohen Mahldauern und -frequenzen eine geringe Umwandlung in das R-Enantiomer zeigt. Zuletzt wurde das Abbauprofil von Clopidogrelhydrogensulfat (CLP) untersucht, das im festen Zustand unter oxidativen Bedingungen gestresst wurde. Eine bereits bestehende HPLC-UV Methode wurde optimiert, um die Abbauprodukte ausreichend zu trennen und anschließend mittels UV- und MS/(MS)-Detektion zu charakterisieren. Die meisten der identifizierten Abbauprodukte waren bereits aus konventionellen CLP-Stresstests bekannt. Das Abbauprofil von CLP wurde hauptsächlich durch das Material der Kugelmühle und den Typ des verwendeten Katalysators beeinflusst. KW - HPLC KW - Kapillarelektrophorese KW - NMR-Spektroskopie KW - Paraffin KW - Verunreinigung KW - NMR spectroscopy KW - capillary electrophoresis KW - liquid chromatography KW - paraffins KW - mechanochemical degradation KW - impurities Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-243465 ER - TY - JOUR A1 - Urlaub, Jonas A1 - Kaiser, Reinhard P. A1 - Scherf‐Clavel, Oliver A1 - Bolm, Carsten A1 - Holzgrabe, Ulrike T1 - Investigation of isomerization of dexibuprofen in a ball mill using chiral capillary electrophoresis JF - Electrophoresis N2 - Besides the racemate, the S‐enantiomer of ibuprofen (Ibu) is used for the treatment of inflammation and pain. Since the configurational stability of S‐Ibu in solid state is of interest, it was studied by means of ball milling experiments. For the evaluation of the enantiomeric composition, a chiral CE method was developed and validated according to the ICH guideline Q2(R1). The addition of Mg\(^{2+}\), Ca\(^{2+}\), or Zn\(^{2+}\) ions to the background electrolyte (BGE) was found to improve Ibu enantioresolution. Chiral separation of Ibu enantiomers was achieved on a 60.2 cm (50.0 cm effective length) x 75 μm fused‐silica capillary using a background electrolyte (BGE) composed of 50 mM sodium acetate, 10 mM magnesium acetate tetrahydrate, and 35 mM heptakis‐(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin (TM‐β‐CD) as chiral selector. The quantification of R‐Ibu in the mixture was performed using the normalization procedure. Linearity was evaluated in the range of 0.68–5.49% R‐Ibu (R\(^{2}\) = 0.999), recovery was found to range between 97 and 103%, the RSD of intra‐ and interday precision below 2.5%, and the limit of quantification for R‐ in S‐Ibu was calculated to be 0.21% (extrapolated) and 0.15% (dilution of racemic ibuprofen), respectively. Isomerization of S‐Ibu was observed under basic conditions by applying long milling times and high milling frequencies. KW - capillary electrophoresis KW - chiral separation KW - Ibuprofen KW - isomerization KW - validation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-225852 VL - 42 IS - 17-18 SP - 1790 EP - 1799 ER - TY - THES A1 - Borst, Claudia T1 - Kapillarelektrophoretische Reinheitsanalytik verschiedener Arzneistoffe des Europäischen Arzneibuchs T1 - Capillary electrophoretic impurity analysis of different drugs of the European Pharmacopoeia N2 - Die Kapillarelektophorese (CE), deren Trennprinzip auf der Wanderung geladener Teilchen im elektrischen Feld basiert, ist eine Methode, die in verschiedenen Techniken angewandt werden kann. Sowohl die wässrige Kapillarzonenelektrophorese (CZE) als auch die wasserfreie CE (NACE), aber auch die elektrokinetische Chromatographie mittels Mikroemulsion (MEEKC) wurden in dieser Arbeit für die Reinheitsanalytik der im Europäischen Arzneibuch beschriebenen Wirkstoffe Ethambutol, Quetiapin, Ephedrin sowie Levodopa und deren jeweils strukturverwandter Substanzen benutzt. Der Wirkstoff Ethambutol wird in der (S,S)-Form verwendet, die im Ph. Eur. 7 als Dihydrochlorid aufgeführt ist. Um eine Trennmethode für (S,S)-Ethambutol, sein Enantiomer und die achirale meso-Verbindung entwickeln zu können, wurden die beiden stereoisomeren Verunreinigungen aus 2-Amino-1-butanol und Diethyloxalat synthetisiert. Zur Trennung dieser drei Ethambutol-Isomere wurde CZE als Methode gewählt. In saurem Phosphatpuffer musste eine hohe Probenkonzentration von 1 mg/ml verwendet werden, um die Substanzen mit UV detektieren zu können (λ: 200 nm). In alkalischem Tetraboratpuffer war das Chromophor dank der freien Elektronenpaare der Stickstoff-Moleküle besser ausgeprägt und die Intensität der Peaks deutlich intensiver. Als chirale Selektoren wurden die nativen α-, β- und γ-Cyclodextine (CDs) und verschiedene derivatisierte β-CDs eingesetzt. Die Methode wurde vielfach in Bezug auf Molarität und pH-Wert der Puffer, Konzentration der verschiedenen chiralen Selektoren, Spannung und Temperatur modifiziert. Jedoch konnte keine Trennung der Stereoisomere erreicht werden. Eine CD-modifizierte MEEKC-Methode wurde herangezogen, um die Racemate der Aminosäuren Dopa, Methyldopa, Tyrosin und Phenylalanin voneinander zu trennen. Dazu wurde eine Mikroemulsion (ME) aus Ethylacetat, SDS, 1-Butanol, Phosphatpuffer, sulf. β-CD und, wenn nötig, aus dem organischen Modifier 2-Propanol eingesetzt. Für jede DL-Aminosäure wurde die Zusammensetzung der ME als auch die Geräteeinstellungen (Spannung, Temperatur) optimiert. Die Trennung von DL-Dopa konnte ohne Zugabe eines organischen Modifiers durchgeführt werden. Auf Grundlage dieser individuellen Methoden wurden zwei CD-modifizierte MEEKC-Methoden entwickelt, mit denen alle vier untersuchten Racemate getrennt werden konnten. Die abschließende Validierung in Bezug auf Wiederholpräzision (Auflösung, Migrationszeiten, Verhältnis der korrigierten Peakflächen und Anzahl der theoretischen Böden) und Detektionsgrenzen zeigte, dass die Methoden präzise Ergebnisse liefern. Die Technik der MEEKC wurde auch zur Trennung von Ephedrin-Derivaten genutzt. Wedig et al. konnten die Racemate von Ephedrin, Pseudoephedrin, N-Methylephedrin und Norephedrin mit einer HDAS-β-CD-modifizierten CZE-Methode in einem Lauf basislinientrennen, indem ein 50 mM Phosphatpuffer, pH 3,0 als HGE eingesetzt wurde. Aus diesem HGE und den organischen Bestandteilen, die zur Trennung der Aminosäuren führten, wurde eine ME hergestellt. Entgegen der Methode von Wedig et al. konnte mittels HDAS-β-CD keine zufriedenstellende Trennleistung erreicht werden. Durch Austausch des chiralen Selektors gegen sulf. β-CD und Modifizierung des Phosphatpuffers in Ionenstärke und pH-Wert konnte für alle vier Epedrin-Derivate eine Basislinientrennung erzielt werden. Diese MEEKC-Methode wurde auf weitere Ephedrin-Derivate angewandt, wodurch das racemische 2-(Dibutylamino)-1-phenyl-1-propanol partiell, die Racemate von Adrenalin, 2-Amino-1-phenylethanol und Diethylnorephedrin vollständig voneinander getrennt werden konnten. Während mit der HDAS-β-CD-modifizierten CZE-Methode alle vier Ephedrin-Derivaten in einem Lauf getrennt werden konnten, hat die MEEKC-Methode den Vorteil mit dem kostengünstigeren sulf. β-CD auszukommen. Schlussendlich wurde eine Reinheitsanalytik von Quetiapin und seinen verwandten Substanzen Quetiapindesethanol, Quetiapin-N-Oxid und Quetiapinlactam entwickelt. Da Quetiapinlactam fast ausschließlich in organischen Lösungsmitteln löslich ist, sollte eine wasserfreie CE-Methode (NACE) eingesetzt werden. Zwar konnte eine Methode entwickelt werden, deren HGE aus Methanol, Acetonitril, Ammoniumacetat und Essigsäure bestand, und mit der Quetiapin und seine drei verwandten Substanzen sehr gut getrennt werden konnten. Allerdings konnte sie aufgrund von Stromabbrüchen nicht validiert werden. Alternativ wurde eine wässrige, gut reproduzierbare CZE-Methode gefunden, deren Elektrolytlösung aus einem 80 mM Phosphatpuffer, pH 4.0 bestand. Aufgrund der Wasserunlöslichkeit von Quetiapinlactam konnten so nur Quetiapin und die Verunreinigungen Quetiapindesethanol und Quetiapin-N-Oxid erfasst werden. Abschließend wurde die CZE-Methode validiert, wodurch die hohe Präzision der ermittelten Werte gezeigt werden konnte. N2 - The separation mechanism of capillary electrophoresis (CE) is based on the mobility of ions in an electric field. CE is a versatile technique, which can be operated in different modes. In this work, both aqueous capillary zone electrophoresis (CZE) and nonaqueous CE (NACE) and microemulsion electrokinetic chromatography (MEEKC) were investigated. Using these CE methods, impurity analysis was accomplished for serveral pharmaceuticals, which are described in the European Pharmacopoeia (Ph. Eur.): ethambutol, quetiapine, ephedrine, levodopa and correspondingly related substances. The active agent ethambutol is used in the (S,S)-configuration and in Ph. Eur. 7 the monograph describes the dichloride of the substance. In order to develop a separation method for (S,S)-ethambutol, its enantiomer and the achiral meso-compound were synthesized by the reaction of 2-amino-1-butanol and diethyloxalate. For the separation of these ethambutol compounds the CZE technique was chosen. After using an acid phosphate buffer, the concentration of the sample solution had to be set at 1 mg/ml for an sufficient UV adsorption (λ: 200 nm). After using a basic tetraborate buffer, the chromophore was more sensitive due to the electron pair of the nitrogen molecule, which led to higher peak intensity. Native α-, β- and γ-cyclodextins (CDs) and some derivatives of β-CD were added to the background electrolyte (BGE) as chiral selectors. The CZE method was modified in many ways, e. g. in molarity and pH value of the BGE, in concentration of the chiral selectors, in voltage and in temperature. In spite of various variations, the separation of the stereoisomers was not successful. A CD-modified MEEKC method was applied to separate the racemates of dopa, methyldopa, tyrosine and phenylalanine. For this purpose, a microemulsion (ME) was employed, which consisted of ethyl acetate, SDS, 1-butanol, phosphate buffer, sulf. β-CD and 2-propanol, used as an organic modifier, if necessary. For each DL-amino acid the composition of the ME and the instrument settings (voltage, temperature) were optimized. The separation of DL-dopa was accomplished without an organic modifier. Based on the methods evolved individually, two CD-modified MEEKC methods were developed to separate all four racemates. The concluding validation of these methods with respect of repeatability (resolution, migration time, ratio of the corrected peak areas, and number of theoretical plates) and limit of detection showed that the methods give precise results. The technique of MEEKC was also used for the separation of ephedrine derivatives. By means of a HDAS-β-CD-modified CZE method, Wedig et al. achieved baseline separation of racemic ephedrine, pseudoephedrine, N-methylephedrine and norephedrine in one run. In their experiment the BGE consisted of 50 mM phosphate buffer, pH 3.0. An ME was composed of this buffer as aqueous phase and the organic compounds, which formed the oil-phase of the ME for the amino acids. Contrary to the CZE method of Wedig et al., who used HDAS-β-CD, no satisfying resolution was observed. Replacing the chiral selector HDAS-β-CD with sulf. β-CD and modifying the phosphate buffer in ionic strength and pH value, led to baseline separation of the four mentioned ephedrine derivatives eventually. This MEEKC method was subjected to the separation of other ephedrine derivatives. So racemic 2-(dibutylamino)-1-phenyl-1-propanol could partly be separated, whereas complete separation could be observed for racemic adrenaline, 2-amino-1-phenylethanol and diethylnorephedrine. Whereas the MEEKC method is much cheaper by using sulf. β-CD, the application of the HDAS-modified CZE method resulted in the separation of all four racemic ephedrine alkaloids in one run. Finally, an impurity analysis of quetiapine and its related compounds quetiapine desethanol, quetiapine-N-oxide and quetiapine lactam was develop. The molecular structure of quetiapine lactam needed to be clarified, as this compound had not been described before. By using mass spectrometric (MS) as well as infrared (IR) and NMR investigations, the substance could be identified: Dibenzo[b,f][1,4]thiazepine-11(10H)one. As quetiapine lactam was found to be nearly insoluble in water and aqueous solutions, an NACE method had to be applied. Indeed, a method was developed with a BGE consisting of methanol, acetonitril, ammonium acetate and acetic acid. Thereby, the separation of quetiapine and its three mentioned impurities was observed with high resolution values. However, validation was impossible, because of numerous aborts of the current. Alternatively, an aqueous and highly reproducible CZE method was found with a BGE composed of 80 mM phosphate buffer, pH 4.0. Due to the water insolubility of quetiapine lactam, only quetiapine desethanol and quetiapine-N-oxide could be analysed as impurities. Finally, the aqueous CZE method was validated; the high precision of the results could be verified. KW - Kapillarelektrophorese KW - Arzneimittel KW - Verunreinigung KW - Qualitätskontrolle KW - Europäisches Arzneibuch KW - chirale Trennung KW - Ethambutol KW - Aminosäuren KW - Ephedrin KW - Quetiapin KW - MEEKC KW - CZE KW - NACE KW - Cyclodextrine KW - capillary electrophoresis KW - chiral separation KW - cyclodextrin KW - amino acids Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56243 ER - TY - THES A1 - Polzin, Silke T1 - Lebensalterschätzung aus biologischem Material anhand der 4.977 bp-Deletion in menschlicher mitochondrialer DNA T1 - Age estimation from biological material based on 4,977 bp-deletion in human mitochondrial DNA N2 - Neben der Frage nach dem Lebensalter als Kriterium zur Identifizierung unbekannter Leichen und menschlicher Überreste, wird der Bedarf einer Altersschätzung an lebenden Personen derzeit immer größer. Hinzu kommt die Hoffnung, aus Spuren Rückschlüsse auf das Alter des Spurenlegers ziehen zu können. Ziel dieser Arbeit war es, aus verschiedenen biologischen Materialien das Alter anhand der 4.977 bp-Deletion in menschlicher mitochondrialer DNA abschätzen zu können, wobei der Schwerpunkt auf Material von lebenden Personen lag. Hierzu wurde mit Hilfe geeigneter DNA-Extraktionsmethoden aus verschiedenen Gewebearten, venösem Vollblut, Mundschleimhautabstrichen und Haarwurzeln ausreichend DNA guter Qualität gewonnen. Die Schwierigkeit dieser Untersuchung lag in der Ermöglichung einer Quantifizierungsmethode zur Erfassung der 4.977 bp-Deletion. Dieses Problem wurde, nach der Wahl optimaler Primer und Amplifizierung spezifischer DNA-Fragmente, für die deletierte und die normale mtDNA unter optimierten PCR-Bedingungen im Multi-plex-Ansatz, mit Hilfe der Kapillarelektrophorese gelöst. Mit ihr konnte der Anteil der 4.977 bp-deletierten und der normalen mtDNA durch die computeranalysierten Peakflächen der beiden Fragmente bestimmt und miteinander in Verhältnis gesetzt werden. Dieses Verhältnis wurde durch den Quotienten IDel/INorm ausgedrückt. Die gewonnenen Ergebnisse wurden anschließend ausgedehnten statistischen Erhebungen unterzogen. Die 4.977 bp-Deletion zeigte in allen untersuchten Materialien eine eindeutige Altersabhängigkeit. Dies wurde an der Zunahme des Quotienten IDel/INorm mit steigendem Alter ersichtlich. Für die verschiedenen Gewebearten war die Abhängigkeit dieser Deletion vom Alter bereits aus der Literatur bekannt. Im Blut wurde diese jedoch erstmalig gezeigt, ebenso wie in den Mundschleimhautabstrichen, die bisher noch nie für Untersuchungen der 4.977 bp-Deletion herangezogen wurden. In den Haarwurzeln konnte die Deletion nicht nachgewiesen werden. Auffällig war hierbei, dass die Altersabhängigkeit von Material zu Material unterschiedlich ausgeprägt war. Der größte Anteil deletierter mtDNA fand sich im Gehirngewebe, gefolgt von Skelettmuskulatur, Herz, Lunge, Milz, Niere Leber und Haut. Für diese unterschiedliche Akkumulierung der 4.977 bp-Deletion finden sich zwei mögliche Erklärungsansätze, die Theorie einer unterschiedlichen Mitoserate und die einer unterschiedlichen Stoffwechselaktivität, die beide die gewonnene Rangfolge bestätigen. Des Weiteren wurde eine Abhängigkeit der 4.977 bp-Deletion von der in die PCR eingesetzten DNA-Menge festgestellt. Dieser Effekt muss im Zusammenhang mit der unterschiedlichen Amplifizierungseffizienz der beiden relevanten DNA-Fragmente gesehen werden, wodurch jedoch die Einschränkungen der angewandten unkontrollierten Multiplex-PCR mit anschließender semi-quantitativer Detektion der Amplifikations- produkte deutlich werden. Unter Berücksichtigung der Einschränkungen gelang anhand von Perzentilentabellen eine Altersschätzung mit der Angabe einer Altersspanne von ungefähr 30 Jahren. Um eine genauere Altersschätzung zu erreichen, wäre eine Optimierung der Methode, z. B. durch Anwendung einer real-time quantitativen PCR, und eine Einbeziehung einer noch größeren Probenzahl nötig. N2 - Not only is age an important criteria for the identification of unknown bodies and human remains, there is also a growing need to estimate the age of living persons. In addition, there is hope that trace evidence will permit conclusions about the age of the individual who left the evidence. The goal of this project was to estimate age from various biological materials based on 4,977 bp-deletion in human mitochondrial DNA, with the majority of materials being provided by living persons. To this end, sufficient amounts of good quality DNA were obtained, using appropriate methods of DNA extraction, from various types of tissue, venous blood, swabs of the mucous membranes in the mouth, and hair roots. The difficult aspect of this study was the determination of a method which would allow for the quantification of 4,977 bp-deletion. After evaluation of optimized primer and multiplex-PCR conditions for amplification of specific DNA fragments for the deleted and the normal mtDNA, this problem was solved using capillary electrophoresis for quantification. This allowed for the determination of the proportions of 4,977 bp-deleted and normal mtDNA through the computer analysis of the peak areas of the two fragments and the calculation of their ratio. This ratio was expressed through the IDel/INorm quotient. Results were subsequently submitted to extensive statistical analyses. 4,977 bp-deletion showed a significant correlation with age in all examined materials. This was made evident by growing IDel/INorm quotients with increasing age. For various tissue types, the association between this deletion and age was known from the research literature. However, this relationship was demonstrated for the first time in blood, as well as in the swabs of the mucous membrane of the mouth, which had never previously been used for the assessment of 4,977 bp-deletion. No deletion was found in hair roots. It was striking that the strength of the association with age differed from material to material. The greatest proportion of deleted mtDNA was found in brain tissue, followed by skeletal muscles, heart, lung, spleen, kidney, liver, and skin. There are two possible explanations for this differential accumulation of 4,977 bp-deletion: (1) the theory of differential mitosis rates and (2) the theory of differential metabolic activity, both of which are consistent with the current findings. Furthermore, a correlation between 4,977 bp-deletion and the amount of DNA used in the PCR was observed. This effect must be considered in the context of the various degrees of efficiency in the amplification of the two relevant DNA fragments, which underscores the limitations of the employed method of uncontrolled multiplex-PCR with subsequent semi-quantitative detection of the amplification products. Considering these limitations, age estimation was accomplished with the use of percentile tables, which allowed a determination of an age range of approximately 30 years. A more accurate estimation of age would require an optimization of the current method, for example, through the application of real-time quantitative PCR, and the inclusion of a larger sample size. KW - mtDNA KW - Lebensalter KW - Mensch KW - 4.977 bp-Deletion KW - Quantifizierung KW - Kapillarelektrophorese KW - Gewebe KW - Blut KW - Mundschleimhautabstrich KW - mtDNA KW - age KW - human KW - 4 KW - 977 bp-deletion KW - quantification KW - capillary electrophoresis KW - tissue KW - blood KW - saliva KW - polymerase chain reaction Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2999 ER - TY - JOUR A1 - Schmidt, Sebastian A1 - Holzgrabe, Ulrike T1 - Method development, optimization, and validation of the separation of ketamine enantiomers by capillary electrophoresis using design of experiments JF - Chromatographia N2 - Capillary electrophoresis was chosen as cost-effective and robust method to separate ketamine enantiomers. For the method development, first different native and modified cyclodextrins were tested. The most promising chiral selector was α-cyclodextrin. A design of experiments (DoE) was carried out, which started with the screening of relevant factors. Based on these results, the method was optimized according to the significant factors (buffer, cyclodextrin concentration, pH value, voltage, temperature) of the screening based on the response resolution and migration time of the later migrating enantiomer. The optimized conditions consisted of a background electrolyte with 275 mM TRIS, adjusted with 85% phosphoric acid to a pH of 2.50, and 50 mM α-cyclodextrin, at a temperature of 15 °C, an applied voltage of 30 kV and an injection pressure of 1.0 psi for 10 s. A fused-silica capillary with a total length of 70 cm and an effective length to the detector of 60 cm was used. The method was validated according to ICH guideline Q2 R(1). The limit of quantification was 3.51 µg mL\(^{−1}\) for S-ketamine and 3.98 µg mL\(^{−1}\)for R-ketamine. The method showed good linearity for racemic ketamine with R\(^2\) of 0.9995 for S-ketamine and 0.9994 for R-ketamine. The lowest quantifiable content of S-ketamine found in R-ketamine was 0.45%. KW - ketamine KW - capillary electrophoresis KW - design of experiments KW - cyclodextrins KW - enantiomers Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-324713 SN - 0009-5893 VL - 86 IS - 1 ER - TY - THES A1 - Novatchev, Nikolai T1 - Untersuchung des Verunreinigungsprofils von Aminosäuren aus fermentativer Herstellung mittels Kapillarelektrophorese T1 - Evaluation of the impurity profile of amino acids of biotechnological origin by means of capillary electrophoresis N2 - Gegenstand der vorliegenden Arbeit war die Untersuchungen von Verunreinigungsprofilen von Aminosäuren aus biotechnologischer Herstellung. Dazu sollten die Aminosäuren Arg, His, Ile, Lys, Phe, Pro, Ser und Trp von verschiedenen Herstellern und aus unterschiedlichen Batches genauer unter die Lupe genommen werden. Mit der im Europäischen Arzneibuch beschriebenen dünnschichtchromatographischen Methode (DC-Methode) für „mit Ninhydrin nachweisbare Substanzen“ können ausschließlich Fremdaminosäuren nachgewiesen werden und dies nur, wenn der jeweilige Gehalt relativ hoch ist. Andere Stoffgruppen, die aus der biotechnologischen Herstellung stammen, werden aufgrund der Trennbedingungen sowie der Detektionsart der DC-Methode nicht erfasst. Deshalb mussten neue Methoden entwickelt werden. Laut Vorschriften der International Conference of Harmonisation (ICH) müssen unbekannte Verunreinigungen in Wirkstoffen für orale Therapeutika auf 0,1 % w/w begrenzt werden können. In die Untersuchungen wurden neben den Fremdaminosäuren auch Peptide, Aminozucker und Nucleinsäuren als potentielle Verunreinigungen, die aus der Herstellung bzw. aus dem Reinigungsprozess kommen, einbezogen. Diese zusätzlichen Stoffgruppen können aus den „Nebenaktivitäten“ der Mikroorganismen entstehen. Aminosäuren, Peptide und Aminozucker wurden versucht, kapillarelektrophoretisch zu quantifizieren. Für die Bestimmung von Nucleinsäuren wurde zusätzlich die UV-Spektroskopie eingesetzt. N2 - Aim of the present work was to investigate the impurity profiles of amino acids of biotechnological origin. Eight amino acids were included: Arg, His, Ile, Lys, Phe, Pro, Ser and Trp. The amino acid samples originating from different producers and different batches had to be studied in deeper detail. The thin-layer chromatographic method (TLC-method) of “ninhydrin-positive substances”, as described in the European Pharmacopoeia, is able to detect primarily other amino acids, if their respective content is relatively high. Other groups of substances of biotechnological origin cannot be detected due to the separation conditions and the detection principle of the TLC-method. Therefore new methods had to be developed. In accordance with the guidelines of the International Conference of Harmonisation (ICH), the content of unknown impurities in active ingredients for oral therapeutics should be limited to 0,1 % w/w. Apart from other amino acids, the study included peptides, amino sugars and nucleic acids as potential impurities, originating from production or purification processes. These additional groups of substances are byproducts of the biosynthesis pathways of microorganisms. An attempt was made to quantify the amino acids, peptides and amino sugars by means of capillary electrophoresis. UV-spectrophotometry was additionally used for the determination of nucleic acids. KW - Aminosäuren KW - Verunreinigung KW - Fermentation KW - Kapillarelektrophorese KW - Aminosäuren KW - Verunreinigugsprofil KW - Fermentation KW - Kapillarelektrophorese KW - amino acids KW - impurity profile KW - fermentation KW - capillary electrophoresis Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4106 ER -