TY - THES A1 - Kraft, Mario T1 - [1]- und [2]Borametallocenophane der Gruppe-4-Metalle : Synthese, Struktur und katalytische Aktivität T1 - [1]- and [2]Borametallocenophanes of Group 4 metals - Synthesis, Structur und catalytic Activity N2 - In der vorliegenden Arbeit wird über die Synthese, Struktur und katalytische Aktivität von borverbrückten Gruppe 4 Metallocenophanen berichtet, die als Katalysatoren in der Ziegler-Natta-artigen Olefinpolymerisation eingesetzt werden können. Neben den bereits bekannten [1]Borametallocenophanen wurden weitere Komplexe mit unterschiedlichen Substituenten, als auch die bislang unbekannten [2]Borametallocenophane synthetisiert und charakterisiert. Vergleichende Polymerisationsstudien einer Reihe von unterschiedlich substituierten [n]Borametallocenophanen (n = 1,2) wurden unter definierten Standardbedingungen durchgeführt, um einen möglichen Einfluss der am Boratom gebundenen Substituenten zu beobachten. Weitergehende Untersuchungen bezogen sich auf den Einfluss dieser Substituenten auf sterische und elektronische Einflüsse, die mit den Polymerisationsergebnissen korreliert wurden. Hierbei wurden die sterischen Einflüsse der verschiedenen Substituenten anhand der Kristallstrukturen festgemacht; elektronische Einflüsse sollten anhand von CO Schwingungen, die mittels Infrarotspektroskopie beobachtet werden können, von korrespondierenden Carbonylkomplexen und alternativ mittels 91Zr-NMR Spektroskopie untersucht werden. N2 - In this thesis the synthesis, structure and catalytic activity of boron bridged Group 4 metallocenophanes are reported. These type of complexes are suitable catalyst precursors for the Ziegler-Natta-type olefin polymerization. Besides the known [1]borametallocenophanes new complexes with different substituents as well as the so far unknown [2]borametallocenophanes were synthesized and characterized. A series of differently substituted [n]borametallocenophanes (n = 1,2) were used under defined polymerization conditions, to study a possible influence of the substituents at boron on the catalytic performance. Furthermore, the influence of steric and electronic parameters was evaluated. X-ray structural determinations were used to determine steric changes imposed by the different substituents. Electronic changes were analyzed with the aid of infrared spectroscopy by comparison with the corresponding carbonyl complexes and, alternatively, by 91Zr NMR spectroscopy. KW - Borkomplexe KW - Metallocene KW - Vierte Nebengruppe KW - Cyclophane KW - Bor KW - Metallocenophane KW - ansa-Metallocene KW - Olefinpolymerisation KW - Boron KW - Metallocenophanes KW - ansa-Metallocenes KW - olefin polymerization Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14689 ER - TY - THES A1 - Kupfer, Thomas T1 - Darstellung und Charakterisierung von gespannten [n]Metalloarenophanen und Borolen T1 - Synthesis and Characterization of strained [n]Metalloarenophanes and Boroles N2 - Die Darstellung von gespannten ansa-Komplexen verschiedener Übergangsmetall-Sandwichverbindungen gelingt durch Umsetzung von dimetallierten Metallocenvorstufen mit den entsprechenden Elementdiahlogeniden. Die Ringspannung in diesen Systemen kann für eine ausgeprägte Folgereaktivität (Ringöffnungsreaktionen, ROP, Diborierung, Bis(silylierung), etc.) ausgenutzt werden. Kristallstrukturanalysen verschiedener Borol-Derivate belegen die hohe Lewis-Azidität des Borzentrums sowie den antiaromatischen Charakter dieser Verbindungsklasse. N2 - The synthesis of strained [n]metalloarenophanes of several transition-metal sandwich complexes has been achieved by salt elimination reactions of dimetalated metallocene precursors with the appropriate element dihalides. The molecular ring strain in these sytems is accompanied by an enhanced reactivity (ring-opening reactions, ROP, diboration, bis(silylation), etc.). X-ray diffraction studies of several borole derivatives have proven the extraordinarily high Lewis acidity of the boron center, as well as the antiaromatic character of these heterocycles. KW - Metallocene KW - Ringöffnungspolymerisation KW - Borierung KW - Silylierung KW - Ringspannung KW - Antiaromatizität KW - Borole KW - Metalloarenophane KW - ROP KW - ansa-Komplexe KW - DFT KW - Metalloarenophanes KW - ROP KW - Borole KW - Antiaromaticity Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24999 ER - TY - INPR A1 - Braunschweig, Holger A1 - Krummenacher, Ivo A1 - Lichtenberg, Crispin A1 - Mattock, James A1 - Schäfer, Marius A1 - Schmidt, Uwe A1 - Schneider, Christoph A1 - Steffenhagen, Thomas A1 - Ullrich, Stefan A1 - Vargas, Alfredo T1 - Dibora[2]ferrocenophane: A Carbene-Stabilized Diborene in a Strained cis-Configuration T2 - Angewandte Chemie, International Edition N2 - Unsaturated bridges that link the two cyclopentadienyl ligands together in strained ansa metallocenes are rare and limited to carbon-carbon double bonds. The synthesis and isolation of a strained ferrocenophane containing an unsaturated two-boron bridge, isoelectronic with a C=C double bond, was achieved by reduction of a carbene-stabilized 1,1’-bis(dihaloboryl)ferrocene. A combination of spectroscopic and electrochemical measurements as well as density functional theory (DFT) calculations was used to assess the influence of the unprecedented strained cis configuration on the optical and electrochemical properties of the carbene-stabilized diborene unit. Initial reactivity studies show that the dibora[2]ferrocenophane is prone to boron-boron double bond cleavage reactions. KW - Boron KW - Metallocenes KW - Metallocene KW - Bor KW - Diborane KW - density functional calculations KW - strained molecules KW - diborenes Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-141981 N1 - This is the pre-peer reviewed version of the following article: Angewandte Chemie, International Edition, Volume 56, Issue 3, 889–892, which has been published in final form at doi:10.1002/anie.201609601. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. ER - TY - THES A1 - Friedrich, Maria T1 - Neue metallreiche [n]Metalloarenophane: Synthese, Struktur und katalytische Aktivität T1 - New metal-enriched [n]Metalloarenophanes: Synthesis, Structure and Catalytic Activity N2 - Ausgehend von den dilithiierten Verbindungen [Cr(C6H5Li)2]·(tmeda), [Cr(C5H4Li)(C7H6Li)]·(tmeda) und [Mn(C5H4Li)(C6H5Li)]·(tmeda) konnten durch Umsetzung mit Elementdihalogeniden der Gruppe 4 neue [1]Metalloarenophane synthetisiert werden. Aufgrund des großen Kovalenzradius von Zirkon weisen diese Spezies erwartungsgemäß nur sehr geringe Molekülspannungen auf, weshalb deren intensive Färbung nicht allein auf eine mit der Verbrückung einhergehende Verkleinerung des HOMO-LUMO-Abstandes zurückgeführt werden konnte. Die UV-Vis-spektroskopischen Untersuchungen zeigten ein nicht einheitliches Verhalten, so dass deren Hintergrund mittels zeitabhängiger DFT-Rechnungen (B3LYP/BP86) untersucht wurden. Den Rechnungen zufolge muss bei der niederenergetischsten Anregung dieser [1]Metalloarenophane ein starker elektronischer Einfluss der ansa-Brücke mit berücksichtigt werden. Die Übergänge finden demnach aus dem metallzentrierten HOMO in das LUMO statt, welches hauptsächlich an der Zr-Brücke lokalisiert ist. Des Weiteren ist es gelungen, heteroleptische 1,1 ́-Bis(phosphanyl)trochrocenderivate darzustellen. Neben NMR-spektroskopischen Experimenten belegen auch Kristallstrukturanalysen die Gegenwart nahezu ungespannter Systeme. Die Reaktivität dieser 1,1 ́-Bis(phosphane) in Hinblick auf deren Verwendung als Chelatliganden wurde durch deren Umsetzung mit Metallcarbonylen der Gruppe 6 sowie mit geeigneten Palladium- und Platinkomplexen untersucht. Auf diese Weise konnten bimetallische [3]Trochrocenophane erhalten werden. Durch Umsetzung mit MeLi bzw. M-C≡C-Ph (M = Li, Na) ist es in weiterführenden Experimenten gelungen, die disubstituierten Spezies darzustellen, welche eine deutlich erhöhte Löslichkeit als die entsprechenden MCl2-verbrückten Ausgangsverbindungen zeigten und konnten isoliert und in Lösung vollständig durch NMR-Spektroskopie charakterisiert werden. Die Ergebnisse dieser Studien stehen erwartungsgemäß im Einklang mit der Gegenwart ungespannter Systeme, was weiterhin durch Röntgenstrukturanalysen belegt werden konnte. Die Eignung der PdCl2-verbrückten 1,1´-Bis(phosphanyl)trochrocene als Katalysator für die Heck-Reaktion wurde weiterhin untersucht. Katalysestudien zur Umsetzung von Brombenzol mit Styrol zu trans- und cis-Stilben belegen eindeutig die katalytische Aktivität dieser Spezies. N2 - Based on the reaction of the dilithiated species [Cr(C6H5Li)2]·(tmeda), [Cr(C5H4Li)(C7H6Li)]·(tmeda) and [Mn(C5H4Li)(C6H5Li)]·(tmeda) with group 4 metal dichlorides new [1]metalloarenophanes were obtained. Due to the large covalent radius of the zirconium atom all species exhibit, as expected, little molecular ring strain. Therefore their intense colouration can not arise merely by the reduction of the HOMO-LUMO gap due to tilting. UV-Vis spectroscopy show an irregular trend, for which reason time-dependent DFT calculations (B3LYP/BP86) were conducted. According to these, the ansa-bridge executes a strong electronic influence on the lowest-energy transition in these [1]metalloarenophanes. These transitions arise from metal-centered orbitals (HOMO) to acceptor orbitals, predominately located at the zirconium bridge (LUMO). Furthermore, heteroleptic 1,1 ́-bis(phosphanyl)trochrocene derivatives could be obtained. In addition to solution NMR spectroscopic characterisation, the nonstrained character was further validated by X-ray diffraction analysis. The suitability of these 1,1 ́-bis(phosphanyles) to act as chelating ligands was subsequently evaluated by reactivity studies toward group 6 metalcarbonyls and adequate palladium- and platinum complexes. By this way the bimetallic [3]trochrocenophanes could be obtained. By further reaction with MeLi or M-C≡C-Ph (M = Li, Na) the disubstituted species could be synthesised. In contrast to their MCl2-precursors they show an increased solubility were isolated and fully characterised by solution NMR spectroscopy. Results of these studies suggest, as expected, the non-strained character of these systems, which is further validated by X-ray diffraction analysis. The applicability of the PdCl2-bridged 1,1´-bis(phosphanyl)trochrocenes to act as catalysts in the Heck reaction was investigated. Catalytic studies on the reaction of bromobenzene with styrene to trans- and cis-stilbene demonstrate the activity of these species. KW - Metallocene KW - Sandwich-Verbindungen KW - Heck-Reaktion KW - Metalloarenophane KW - Bis(phosphanyle) KW - Metalloarenophanes KW - Bis(phosphanyles) Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66893 ER - TY - THES A1 - Arnold, Thomas T1 - Reaktivität von Disilamolybdänocenophanen T1 - Reactivity of Disilamolybdenocenophanes N2 - Es wird die Reaktivität eines hochgespannten und reaktiven [1],[1]-Disilamolybdänocenophanes gegenüber ungesättigten Substraten, E–H Funktionen und E–E-Bindungen untersucht. Die Produkte wurden mittels spektroskopischer Methoden in Lösung sowie im Festkörper identifiziert und charakterisiert. Weiterhin wird die Reaktivität eines [2]-Disilamolybdänocenophanes ebenfalls gegenüber ungesättigten Substraten und E–E-Bindungen sowie gegenüber Pt(0)-Verbindungen erforscht. Die erhaltenen Komplexe wurden sowohl im Festkörper, als auch in Lösung spektroskopisch untersucht und charakterisiert. N2 - The reactivity of a highly strained and reactive [1],[1]-Disilamolybdenocenophane towards unsaturated substrates, E–H- and E–E-bonds is investigated. The products were identified and characterized by spectroscopic methods in solution and in solid state by X-ray diffraction. Furthermore the reactivity of a [2]-Disilamolybdenocenophane towards unsaturated substrates and E–E-bonds as well as towards Pt(0) compounds is studied. The obtained complexes were characterized in solution by NMR spectroscopy and in the solid state by X-ray diffraction. KW - Metallocene KW - Molybdän KW - Silanderivate KW - Reaktivität KW - ansa-Metallocene KW - Metallocenophane KW - metallocenes KW - molybdenum KW - silicon KW - reactivity KW - inorganic chemistry KW - ansa-metallocenes KW - metallocenophanes KW - Silicium KW - Anorganische Chemie Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-83865 ER - TY - THES A1 - Fuß, Marco T1 - Synthese, Charakterisierung und Reaktivität heteroleptischer [n]Metalloarenophane T1 - Synthesis, Characterisation and Reactivity of heteroleptic [n]Metalloarenophanes N2 - In dieser Arbeit wurde eine verbesserte Synthesestrategie für [Ti(η5-C5H5)(η7-C7H7)] entwickelt. Daraufhin wurde [Ti(η5-C5H5)(η7-C7H7)] in Anlehnung an eine bekannte Literaturvorschrift in [Ti(η5-C5H4Li)(η7 C7H6Li)]∙pmdta überführt, welches mit verschiedenen Elementdihalogeniden zu [Ti(η5-C5H4)(η7-C7H6)E2R4] (E2R4 = B2(NMe2)2, Si2Me4, Sn2tBu4) bzw. [Ti(η5-C5H4SiMe2)(η7-C7H6SiMe2)CH2)] umgesetzt wurde. Die Röntgenstrukturanalysen der Troticenophane stehen in vollem Einklang mit den NMR-spektroskopischen Daten in Lösung und belegen die Verringerung der Molekülspannung mit zunehmender Anzahl und wachsendem Kovalenzradius der Brückenatome. UV-Vis-spektroskopische Studien bestätigen die wohldokumentierte Blauverschiebung der langwelligsten Absorptionsbande mit zunehmender Moleküldeformation, lediglich [Ti(η5-C5H4SiMe2)(η7-C7H6SiMe2)CH2] zeigt eine deutliche Abweichung von diesem Trend. Die Umsetzung von [Ti(η5-C5H4)(η7-C7H6)B2(NMe2)2] mit [Pt(PEt3)3] führte zur oxidativen Addition der B-B-Bindung an das niedervalente Platinzentrum, verbunden mit einer signifikanten Abnahme der Ringspannung. Zur Darstellung von Trovacenophanen wurde zunächst die Dimetallierung von [V(η5-C5H5)(η7-C7H7)] optimiert, wobei [V(η5-C5H4Li)(η7-C7H6Li)]∙pmdta in nahezu quantitativer Ausbeute erhalten werden konnte. Die Umsetzung von [V(η5-C5H4Li)(η7-C7H6Li)]∙pmdta mit verschiedenen Elementdihalogeniden ermöglichte die Synthese von [n]Trovacenophanen (n = 1, 2). Erwartungsgemäß bestätigen die Kristallstrukturen von [V(η5-C5H4)(η7-C7H6)SiMeiPr] und [V(η5-C5H4)(η7-C7H6)GeMe2] den gespannten Charakter der ansa-Komplexe. Im Unterschied hierzu wirkt sich die Verknüpfung der Ringliganden in [V(η5-C5H4)(η7-C7H6)Sn2tBu4] kaum auf die Geometrie des Sandwichgerüsts aus. ESR-spektroskopische Untersuchungen untermauern frühere Befunde, wonach die isotrope Hyperfeinkopplungskonstante mit zunehmendem Kippwinkel α abnimmt. Die Übergangsmetall-vermittelte Polymerisation von [V(η5-C5H4)(η7-C7H6)SiMe2] und [V(η5-C5H4)(η7-C7H6)SiMeiPr] konnte mit Hilfe von Karstedt’s Katalysator bei erhöhten Temperaturen verwirklicht werden. Die durchschnittlichen Molekulargewichte der erhaltenen Polymere wurden durch GPC- und DLS-Studien zu mindestens Mn = 10000 g mol-1 bzw. Mn = 5600 g mol-1 mit moderaten Polydispersitäten (Mw/Mn = 2.31 bzw. Mw/Mn = 1.64) bestimmt. Durch Umsetzung von [Ti(η5-C5H5)(η8-C8H8)] mit BuLi in Gegenwart von pmdta konnte erstmals ein Sandwichkomplex mit einem Cot-Liganden selektiv in 1,1ʹ-Position dilithiiert werden. Während alle Versuche zur Synthese gespannter [1]Titanoarenophane scheiterten, ermöglichte die Umsetzung von [Ti(η5-C5H4Li)(η8-C8H7Li)]∙pmdta mit geeigneten Elementdichloriden die Isolierung von [n]Titanoarenophanen (n = 2, 3). Die paramagnetischen ansa-Komplexe wurden hierbei eindeutig durch Massenspektrometrie, Elementaranalyse und Röntgendiffraktometrie charakterisiert. Demnach erweist sich lediglich [Ti(η5-C5H4)(η8-C8H7)Si2Me4] als moderat gespanntes System, wohingegen [Ti(η5-C5H4)(η8-C8H7)Sn2tBu4] und [Ti(η5-C5H4SiMe2)(η8-C8H7SiMe2)CH2] eine coplanare Anordnung der Ringliganden aufweisen. Durch Einelektronen-Oxidation mit [Fe(η5-C5H5)2][X] (X = BArf4, PF6) konnten die ansa-Komplexe nachfolgend selektiv in die entsprechenden Kationen überführt werden. Mit der Darstellung von [Cr(η5-C5H4Li)(η6-C6H5Li)]∙pmdta gelang erstmals die Dimetallierung eines paramagnetischen Sandwichkomplexes der Zusammensetzung [M(η5-C5H5)(η6-C6H6)]. Nachfolgende Umsetzung mit Gruppe 14-Elementdichloriden lieferte die [n]Chromoarenophane [Cr(η5-C5H4)(η6-C6H5)ER2] (ER2 = SiMe2, SiMeiPr, SiiPr2, GeMe2, SntBu2), [Cr(η5-C5H4)(η6-C6H5)E2R4] (E2R4 = Si2Me4, Sn2tBu4) und [Cr(η5-C5H4SiMe2)(η6-C6H5SiMe2)CH2], welche zweifelsfrei durch Elementaranalysen und Massenspektrometrie identifiziert werden konnten. UV-Vis-spektroskopische Untersuchungen an den ansa-Komplexen offenbaren keinen Zusammenhang zwischen geometrischen und spektroskopischen Parametern, weshalb eine Abschätzung der Ringspannung für diese Systeme ohne Röntgenstrukturanalysen nicht möglich war. Erwartungsgemäß ist die Insertion einer {Pt(PEt3)2}-Einheit in die Sn-Cipso-Bindung zum Sechsring von [Cr(η5-C5H4)(η6-C6H5)SntBu2] mit einer deutlichen Verringerung der Moleküldeformation verbunden. Durch die Synthese von [Mn(η5-C5H4)(η6-C6H5)ER2] (ER2 = BNCy2, Si(CH2)3, GeMe2, SntBu2) wurde die Reihe an bekannten [1]Manganoarenophanen systematisch erweitert. Während die 1H NMR-Spektren der ansa-Komplexe keine eindeutigen Aussagen über das Ausmaß der Ringspannung in diesen Verbindungen erlauben, lassen die Hochfeldverschiebungen der Cipso-Atome in den 13C-NMR-Spektrem eine ausgeprägte Verzerrung erwarten. Im Unterschied dazu sprechen die NMR-Daten von [Mn(η5-C5H4)(η6-C6H5)Sn2tBu4] für eine eher ungespannte Natur der Sandwicheinheit. N2 - In this work an improved experimental approach toward [Ti(η5-C5H5)(η7-C7H7)] was developed. Subsequently, [Ti(η5-C5H5)(η7-C7H7)] was converted to the established dilithiated species [Ti(η5-C5H4Li)(η7-C7H6Li)]∙pmdta, which facilitated access to [Ti(η5-C5H4)(η7-C7H6)E2R4] (E2R4 = B2(NMe2)2, Si2Me4, Sn2tBu4) and [Ti(η5-C5H4SiMe2)(η7-C7H6SiMe2)CH2)], respectively, upon reaction with suitable element dihalides. The results of X-ray diffraction studies on the troticenophanes are consistent with the NMR spectroscopic data in solution and thus confirm the anticipated trend that molecular strain increases with decreasing number and smaller covalent radii of the bridging elements. Only [Ti(η5-C5H4SiMe2)(η7-C7H6SiMe2)CH2] deviates considerably from this trend. Reaction of [Ti(η5-C5H4)(η7-C7H6)B2(NMe2)2] with [Pt(PEt3)3] resulted in the oxidative addition of the B-B-bond to the low-valent platinum center accompanied by a notable reduction of ring strain. In addition, the selective dimetalation of [V(η5-C5H5)(η7-C7H7)] was successfully optimized, yielding [V(η5-C5H4Li)(η7-C7H6Li)]∙pmdta almost quantitatively. Subsequent reaction of [V(η5-C5H4Li)(η7-C7H6Li)]∙pmdta with various element dihalides afforded [n]trovacenophanes (n = 1, 2). As anticipated, the molecular structures of [V(η5-C5H4)(η7-C7H6)SiMeiPr] and [V(η5-C5H4)(η7-C7H6)GeMe2] confirm the strained character of these species. By contrast, the linkage of the ring ligands in [V(η5-C5H4)(η7-C7H6)Sn2tBu4] only marginally affects the geometry of the sandwich backbone. ESR-spectroscopic studies further highlight the previously observed trend that the hyperfine coupling constant is reduced with increasing tilt-angles α. Transition-metal mediated polymerization of [V(η5-C5H4)(η7-C7H6)SiMe2] and [V(η5-C5H4)(η7-C7H6)SiMeiPr] was accomplished by employing Karstedt’s catalyst at elevated temperatures. The averaged molecular weights of the resulting polymers were determined by GPC- and DLS-studies to at least Mn = 10000 g mol-1 and Mn = 5600 g mol-1, respectively, with moderate polydispersities (Mw/Mn = 2.31 and Mw/Mn = 1.64). Addition of BuLi in the presence of pmdta to [Ti(η5-C5H5)(η8-C8H8)] enabled unprecedented dilithiation of a sandwich complex featuring the Cot-ligand. While all efforts to generate [1]titanoarenophanes remained unsuccessful, several derivatives with di- and triatomic ansa-bridges were obtained by reaction of [Ti(η5-C5H4Li)(η8-C8H7Li)]∙pmdta with suitable element dichlorides. The paramagnetic complexes were reasonable characterized by mass spectrometry, micro analysis and X-ray diffraction. Accordingly, only [Ti(η5-C5H4)(η8-C8H7)Si2Me4] can be considered as a moderately strained ansa-complex, while [Ti(η5-C5H4)(η8-C8H7)Sn2tBu4] and [Ti(η5-C5H4SiMe2)(η8-C8H7SiMe2)CH2] reveal an coplanar arrangement of the ring ligands. Subsequent one-electron oxidation with [Fe(η5-C5H5)2][X] (X = BArf4, PF6] led to the selective formation of the corresponding cations. The successful synthesis of [Cr(η5-C5H4Li)(η6-C6H5Li)]∙pmdta provided the first example for the dilithiation of a paramagnetic sandwich complex of the type [M(η5-C5H5)(η6-C6H6)]. Subsequent reaction with group 14 element dichlorides enabled the isolation of the [n]chromoarenophanes [Cr(η5-C5H4)(η6-C6H5)ER2] (ER2 = SiMe2, SiMeiPr, SiiPr2, GeMe2, SntBu2), [Cr(η5-C5H4)(η6-C6H5)E2R4] (E2R4 = Si2Me4, Sn2tBu4), and [Cr(η5-C5H4SiMe2)(η6-C6H5SiMe2)CH2], which were identified by elemental analysis and mass spectrometry. No correlation between geometric and spectroscopic parameters could be deduced on the basis of UV-Vis-spectroscopic studies on these ansa-complexes. Consequently, the degree of ring strain present in these ansa-species could not be evaluated without crystallographic studies. As expected, the insertion of a {Pt(PEt3)2}-fragment into the Sn-Cipso-bond to the six-membered ring of [Cr(η5-C5H4)(η6-C6H5)SntBu2] results in a substantial decrease of molecular distortion. With the preparation of [Mn(η5-C5H4)(η6-C6H5)ER2] (ER2 = BNCy2, Si(CH2)3, GeMe2, SntBu2), the range of [1]manganoarenophanes has been expanded systematically. While the 1H NMR spectra do not reveal a distinct trend regarding the molecules distortion, the high field shift of the Cipso atoms in the 13C NMR spectra clearly suggest a strained nature of these species. By contrast, the NMR spectroscopic data of [Mn(η5-C5H4)(η6-C6H5)Sn2tBu4] imply an unstrained character of the sandwich backbone. KW - Sandwich-Verbindungen KW - Metallocene KW - Ringspannung KW - Ringöffnungspolymerisation KW - ansa-Komplexe KW - Metalloarenophane KW - ansa-complexes KW - metalloarenophanes Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65356 ER - TY - THES A1 - Mager, Julian T1 - Synthese, Struktur und Reaktivität neuer [n]Metallocenophane T1 - Synthesis, Structure and Reactivity of new [n]Metallocenophanes N2 - Das Ziel dieser Arbeit bestand in der Synthese und Charakterisierung neuer Metallocenophane mit Sila-, Bora- und Stannabrücken. Sowohl für die Synthese über 1,1'-dimetallierte Metallocene als auch für die Synthese über die sogenannte flytrap-Methode sind dihalogenierte Brücken erforderlich. Für die Synthese neuer Trisilametallocenophane wurde deshalb eine verbesserte Synthese für 1,3-Diphenyl- und 1,3-Dichlorotrisilane erarbeitet. Die für die flytrap-Methode benötigten Liganden konnten aus 1,3-Dichloro-2,2-diisopropyltrisilan durch die Umsetzung mit den lithiierten Ringsystemen Lithiumindenid, Lithiumfluorenid und Lithiumoctafluorenid erhalten werden. Die dadurch dargestellten, zweifach arylsubstituierten Trisilane konnten anschließend erfolgreich mit BuLi zweifach lithiiert werden Das für die Darstellung von Triborametallocenophanen benötigte 1,3-Dibromo-1,2,3-tris(dimethylamino)triboran(5) sowie dessen Vorstufe 1,1,2,3,3-Pentakis-(dimethylamino)triboran(5) wurde über die bekannte Syntheseroute von Nöth et al. dargestellt. Durch eine Verbesserung der Reaktionsbedingungen konnten die Ausbeuten von 23% auf 36% bzw. auf 71% erhöht werden. Außerdem wurde eine Einkristallröntgenstrukturanalyse erhalten. Metallocenophane der 8. Gruppe werden meist durch Reaktion der 1,1'-dilithiierten Metallocenene mit dihalogenierten Brücken dargestellt. Um die Synthese von Rutheno- und Osmocenophanen zu ermöglichen, wurden Ruthenocen und Osmocen mit BuLi und pmdta als Hilfsbase lithiiert und erstmals als Feststoffe isoliert. Diese wurden mittels NMR-Spektroskopie und Einkristallröntgenstrukturanalyse untersucht, wodurch gezeigt wurde, dass sie wie 1,1'-Dilithioferrocen und 1,1'-Dilithometalloarenophane im Feststoff als dimere Verbindungen vorliegen. Aus thf konnte zusätzlich die Einkristallröntgenstrukturanalyse des thf-stabilisierten 1,1'-Dilithioruthenocen-Dimers erhalten werden Mit den in dieser Arbeit synthetisierten 1,3-Dichlorotrisilanen und 1,1'-Dilithioferrocen wurden die entsprechenden Trisilaferrocenophane synthetisiert und mittels NMR-Spektroskopie untersucht. Von der iPropyl-substituierten Verbindung konnte zusätzlich die erste Einkristallröntgenstrukturanalyse eines Trisilaferrocenophans erhalten werden Durch eine Umsetzung von 1,1‘-Dilithioruthenocen und –osmocen mit dem Diisopropyltrisilan konnten die ersten Trisilametallocenophane von Ruthenium und Osmium dargestellt werden. Durch die Umsetzung von 1,1‘-Dilithioosmocen mit Tetramethyldichlorodisilan gelang die Darstellung des ersten Osmocenophans mit einer zweiatomigen Brücke. Von Tetramethyldisilaosmocenophan konnte eine Einkristallröntgenstrukturanalyse erhalten werden. Die Syntheseroute von Tetra-tert-butyldistannaferrocenophan von Braunschweig et al. konnte erfolgreich auf die Synthese der Ruthenium- und Osmiumanaloga übertragen werden. Die zinnverbrückten Metallocenophane konnten NMR-spektroskopisch und durch eine Einkristallröntgenstrukturanalyse charakterisiert werden. Die von Wrackmeyer et al. und Braunschweig et al. bekannte Insertion von Chalkogenen in die Zinn-Zinn-Bindung konnte ebenfalls für die Verbindungen gezeigt werden. Dabei konnte eine deutliche Verkürzung der Reaktionszeit von 10 d auf 1 d durch die Zugabe von einem Äquivalent pmdta zur Reaktionsmischung erreicht werden. Mit der Ligandenvorstufe 1,2-Bis(lithio-cyclopentadienid)-1,1,2,2-tetra-tert-butyldistannan konnten über die flytrap-Methode die Distannametallocenophane von Cobalt und Nickel synthetisiert werden. Zudem konnten beide Verbindungen mit Ferroceniumhexafluorophosphat einfach oxidiert werden. Die beiden 19-Valenzelektronenverbindungen wurden mittels ESR-Spektroskopie untersucht. Von beiden Cobaltocenophanen sowie vom Nickelocenophan konnte eine Einkristallröntgenstrukturanalyse erhalten werden. N2 - The aim of this work consisted in the synthesis and characterization of new metallocenophanes with sila-, bora-, and stanna-bridges. Dihalogenated bridges are necessary both for the synthesis via 1,1’-dimetalated metallocenes and for the synthesis via the so-called flytrap method. Therefore, the first step consisted in the development of an improved synthetic procedure for the synthesis of 1,3-diphenyl-, and 1,3-dichlorotrisilanes. The ligands necessary for the flytrap method were obtained by reacting 1,3-dichloro-2,2-diisoporpltrisilan with the lithiated ring systems lithium indenide, lithium fluorenide, and lithium octafluorenide. Subsequently, a twofold lithiation of these molecules was carried out successfully with BuLi. 1,3-Dibromo-1,2,3-tris(dimethylamino)triborane(5), which is necessary for the synthesis of triborametallocenophanes, and its precursor 1,1,2,3,3,-pentakis(dimethylamino)-triborane(5) were synthesised via the synthetic procedure of Nöth et al.. By adjusting the reaction parameters, the yields were improved from 23% to36% and to 71%. Additionally, a solid state structure was obtained. Metallocenophanes of group 8 are generally synthesised by reacting 1,1'-dilithiated metallocenes with dihalogenated bridges. To achieve the synthesis of ruthenocenophanes and osmocenophanes, ruthenocene and osmocene were lithiated with BuLi and pmdta and isolated for the first time as solids. These were analysed via NMR spectroscopy and molecular structure analysis. This showed that both are dimers in the solid state, similar to 1,1'-dilithioferrocene and 1,1'-dilithiometalloarenophane. Additionally, the solid state structure of the thf-stabilised 1,1'-dilithioruthenocene dimer was obtained. Using the trisilanes and 1,1’-dilithioferrocene, new trisilaferrocenophanes were synthesised and analysed via NMR spectroscopy. Additionally, the first example of a crystal structure analysis of a trisilaferrocenophane was obtained. By reacting 1,1’-dilithioruthenocene and -osmocene with diisopropyltrisilane, the first trisilametallocenophanes of ruthenium and osmium were obtained. The reaction of 1,1’-dilithioosmocene with Me4Si2Cl2 resulted in the first osmocenophane with a diatomic bridge Also, a crystal structure analysis was obtained. The earlier synthesis of tetra-tert-butyldistannaferrocenophane by Braunschweig et al. was successfully transferred to the synthesis of the ruthenium and osmium analogues. The tin-bridged metallocenophanes were characterised by NMR spectroscopy and molecular structure analysis. The insertion of chalcogens into the tin-tin bond, previously reported by Wrackmeyer et al. and Braunschweig et al. was also shown. By adding one equivalent of pmdta to the reaction mixture, the reaction time was shortened significantly from 10 d to less than1 d. Using the ligand precursor 1,2-bis(lithio-cyclopentadienide)-1,1,2,2-tetra-tert-butyldistannane and the flytrap method, the distannametallocenophanes of cobalt and nickel were synthesised. Additionally, both compounds were oxidised by one electron using ferrocenium hexafluorophosphate. The 19 valence electron compounds were analysed via ESR spectroscopy. Crystal structure analyses were obtained from both cobaltocenophanes as well as the nickelocenophane. KW - Metallocene KW - Cyclophane KW - Übergangsmetallorganische Verbindungen KW - Metallocenophane KW - Übergangsmetalle KW - ansa KW - Metallorganic KW - Osmium KW - Ruthenium KW - Esien KW - Cobalt KW - Nickel KW - Zinn KW - Silicium KW - Bor KW - Metallocenophanes KW - Transition Metals KW - ansa KW - metal organic Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-78384 ER - TY - THES A1 - Öchsner, Andreas T1 - Synthese, Struktur und Reaktivität von [2]Borametallocenophanen der Gruppe 4 Metalle : Ihr katalytisches Verhalten und die Eigenschaften der erhaltenen Polymere T1 - Synthesis, structure and reactivity of [2]borametallocenophanes of group 4 metals : Their catalytic behaviour and properties of the obtained polymers N2 - In der vorliegenden Arbeit wird die Darstellung einer Reihe monoarylsubstituierter Bisdimethylamino-1-bromo-2-arlydiborane(4) beschrieben. Sowohl die Umsetzung der monoarylsubstituierten Ligandenvorstufen mit einem weiteren Äquivalent Lithium- oder Natriumaryl in einem Ether/Toluol-Gemisch als auch die Umsetzung von 1,2-Dibrom-bis(dimethylamino)diboran(4) mit einem mehrfachen Überschuss Lithium- oder Natriumaryl führte zur Bildung von diarylsubstituierten Diboranen(4). Umsetzung der Ligandenvorstufen mit Lithiumorganylen, wie beispielsweise Li[CH3] oder Li[C4H9] führt zu doppelt deprotonierten Verbindungen. Werden die dilithiierten Verbindungen mit Metallhalogeniden der Gruppe 4 in einem Toluol/Ether-Gemisch umgesetzt, können [2]Borametallocenophane erhalten werden. Von einigen der Verbindungen konnte die Struktur im Festkörper mittels Einkristallstrukturanalyse bestimmt werden. Die Verbindungen zeigen in Lösung ein dynamisches Gleichgewicht, welches durch die Flexibilität der B-B-Brücke ermöglicht wird. Dieses konnte mittels NMR Spektroskopie untersucht werden. Auch die Reaktivität der Verbindungen wurde erforscht. Versuche zur oxidativen Addition von Platin(0) in die B-B-Bindung, wie sie bereits für ähnliche Systeme beschrieben waren, scheiterten. Ebenfalls nicht erfolgreich war der versuchte Austausch der Dimethylaminogruppen an den Bor-Atomen. Di(fluorenyl)substituierte [2]Borametallocenophane zeigen in der Reihe der dargestellten Verbindungen ein einzigartiges Verhalten. Wird die dilithiierte Liganden-Vorstufe bei der Umsetzung mit den Metallhalogeniden der Gruppe 4 Licht ausgesetzt, so lagert sie zum 1,3-Diboretan um. Auch oxidativ kann diese Umlagerung ausgelöst werden. Das Umlagerungsprodukt war von anderen Reaktionen bereits bekannt, konnte im Rahmen dieser Arbeit aber erstmals strukturell charakterisiert werden. Die Dichloroverbindungen der [2]Borametallocenophane können mittels Li[CH3] in die entsprechenden Dimethylkomplexe überführt werden. Damit besteht die Möglichkeit, die Verbindungen nicht nur mit MAO, sondern auch mit alternativen Co-Katalysatoren, wie beispielsweise Tris-(pentafluorphenyl)boran für die Olefinpolymerisation zu aktivieren. Die Aktivierung mittels MAO wurde sowohl mittels NMR- als auch mittels UV/Vis-Spektroskopie bei verschiedenen [Al]/[Zr] Verhältnissen untersucht. Neben den [2]Borametallocenonphanen konnte mit Verbindung [(n5-C29H37)2ZrCl2] das erste Metallocen mit dem neuen OctafluH-Liganden und zwei koordinierenden Arylgruppen dargestellt werden. Um die Polymerisationseigenschaften der Verbindungen zu untersuchen, wurde ein neuer Versuchsaufbau entworfen. Zur Überwachung der Polymerisationen wurde ein Programm entwickelt, was in der Lage war, verbrauchte Gasmenge und Temperatur im Reaktoraufzuzeichnen. Hier wurden die katalytischen Eigenschaften einer Serie von [2]Borametallocenophanen und des dargestellten Metallocens [(n5-C29H37)2ZrCl2] in der Ethen-Homopolymerisation untersucht. Diese Polymere wurden mittels DSC auf ihre thermischen Eigenschaften hin geprüft. Ausgewählte Polymere wurden in Zusammenarbeit mit der LyondellBasell Industries, Basell Polyolefine GmbH, Frankfurt mittels GPC auf ihr mittleres Molekulargewicht und dessen Verteilung hin untersucht. Alle Daten wurden mit denen von industriell verwendeten Katalysatoren und den von Kraft bekannten [1]Borametallocenophanen verglichen. In weiteren Untersuchungen wurde überprüft, in wie weit die Polymerisationsbedingungen, wie beispielsweise das [Al]/[Zr]-Verhältnis, die Temperatur oder der Druck Auswirkungen auf die Eigenschaften des Polymers haben. Eine Reihe von Komplexen wurde überdies in der Ethen/[1]Hexen-Copolymerisation untersucht. Die erhaltenen Copolymere wurden mittels DSC-, GPC-, IR- und NMR- Spektroskopie analysiert. Zusammenfassend lässt sich feststellen, dass eine Reihe neuer Verbindungen dargestellt und charakterisiert werden konnte, wobei insbesondere der neuartige Ligand OctafluH (C29H38) eingesetzt wurde. Die dargestellten [2]Borametallocenophane sind aktive Katalysatoren in der Ziegler-Natta ähnlichen Olefinpolymerisation. Die dargestellten Polymere wurden mittels verschiedener Methoden untersucht. Es zeigte sich, dass [2]Borametallocenophane langkettige Polyolefine und Ethen/1-Hexen Copolymere liefern können. N2 - Based on Krafts work on [1]borametallocenophanes, a various number of monoarylsubstituted bisdimethylamino-1-bromo-2-aryldiboranes(4) were synthesized in the present work. Either the reaction of these monoarylsubstituted compounds with one equivalent of a lithiumaryl in toluene/ether or direct reaction of 1,2-dibromo-bis(dimethylamino)diborane(4) with a large excess of the lithiumaryl leads to the formation of diaryl substituted diboranes(4). Reaction of the ligand precursors with lithium organyls, e.g. Li[CH3] or Li[C4H9] leads to double deprotonation. [2]Borametallocenophanes are accessible via reaction of the dilithiated species with metal halides of Group 4 in toluene/ether. Due to the flexibility of the B-B-bridge, these complexes show dynamic behaviour in solution, which can be monitored by NMR spectroscopy. The solid state structure of some of these complexes could be examined by X-Ray diffraction. The reactivity of the new [2]borametallocenophanes also was reviewed. An oxidative addition reaction of platinum(0) was published for similar systems, but failed in this case. Neither was it possible to substitute the bisdimethylamino-groups bound to the boron-atoms. The prepared di(fluorenyl)substituted [2]borametallocenophanes show a unique feature. If the dilithiated precursor is exposed to visible or UV light during reaction with metal halides of group 4, these complexes rearrange to the 1,3-diboretane. This rearrangement also can be performed oxidatively. The Compound has been previously characterized in solution by multinuclear NMR spectroscopy; its structure in the solid state is now reported for the first time. The [2]borametallocenophanedichlorides can be reacted with Li[CH3], resulting in the corresponding dimethyl complexes. This allows for an alternative activation of the complexes with co-catalysts like tris(pentafluorophenyl)borane, in addition to the common activation with MAO. A model reaction for this alternative activation was performed using K[B(C6F5)4] to obtain a ion pair via chlorine abstraction. The common activation of the metal complexes using MAO was monitored either by NMR- or by UV/Vis-spectroscopy at various [Al]/[Zr] ratios. In addition to the [2]borametallocenophanes, [(n5-C29H37)2ZrCl2] could be prepared. It is the first metallocene with two aryl groups of the new octafluH-ligand (C29H38). To analyse the activity of the compounds in olefin polymerization processes, a new experimental set-up was designed. To control the polymerisation reactions, a Software program was developed, which allowed us to record gas-consumption and temperature in the reactor simultaneously. The catalytic behaviour of a whole series of [2]borametallocenophanes and of compound [(η5-C29H37)2ZrCl2] was studied in ethene homopolymerization. The thermal properties of all produced polymers where analyzed by DSC. The molecular weight distribution of selected examples was studied in cooperation with LyondellBasell Industries, Basell Polyolefine GmbH with GPC analyses. All data where directly compared to reference catalysts and to the [1]borametallocenophanes made by Kraft. The data show, that [2]borametallocenophanes have lower activities than [1]borametallocenophanes, but produce polymers of significantly higher average molecular weight. One can see clear differences throughout the data of the DSC measurements, for instance in the melting point and metling range, or crystallinity of the polymer. The melting points of the polymers obtained from [2]borametallocenophanes and compound [(n5-C29H37)2ZrCl2] are significantly higher than those of the reference catalysts. Additional experiments gave some insight into the relationship between polymerization conditions, e.g. the [Al]/[Zr] ratio, temperature or pressure and the key features of the polymers. It was shown that all these parameters influence the melting point and other specific values of the polymer. Additionally, selected examples were tested in the ethene/1-hexene copolymerization. The copolymers have been analyzed using DSC, GPC, IR and NMR spectroscopy. In conclusion, some new products were prepared and analyzed, in many cases with OctafluH (C29H38) as a substituent. All [2]borametallocenophanes are active catalysts in Ziegler-Natta type olefin polymerization processes. Analyses of the produced polymers revealed that [2]borametallocenophanes can produce long-chain polyethylene and ethene/1-hexene copolymers. KW - Anorganische Chemie KW - Homogene Katalyse KW - Ziegler-Natta-Katalysator KW - Metallocene KW - Bor KW - Polyolefine KW - Metallocenophane KW - metallocenophanes Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-44444 ER - TY - THES A1 - Groß, Manuela T1 - Synthese, Struktur und Reaktivität von [2]Disila- und [1],[1]Disilametallocenophanen T1 - Synthesis, Structure and Reactivity of [2]Disila- and [1],[1]Disilametallocenophanes N2 - Die vorliegende Arbeit befasst sich mit der Synthese, Struktur und Charakterisierung neuer [2]Disilametallocenophane. Die strukturellen Parameter der paramagnetischen Komplexe [(Me2Si)2(η5-C5H4)2M] (M = Co, Ni) sowie der kationischen Verbindung [(Me2Si)2(η5-C5H4)2Co][PF6] deuten auf die Gegenwart moderater Molekülspannung hin. Die verhältnismäßig einfache Aktivierbarkeit der ansa-Brücke spiegelt sich an der Reaktion von [(Me2Si)2(η5-C5H4)2Ni] mit der Ni(0)-Spezies [(tBuNC)4Ni] wieder, die unter Si–Si-Bindungsspaltung zur Bildung des zweikernigen Komplexes [(Me2Si)(η5-C5H4)Ni(CNtBu)]2 führt. Die Niob-Verbindung [(Me2Si)2(η5-C5H4)2NbH3] erwies sich als thermisch nicht stabil, während die entsprechenden ansa-Komplexe des Molybdäns und Wolframs [(Me2Si)2(η5-C5H4)2MH2] (M = Mo, W) unter photochemischen Bedingungen reduktiv Wasserstoff eliminieren und unter oxidativer Addition der Si–Si-Bindung an das Metall zu Bis(ansa)-Komplexen reagieren. Das ungewöhnliche Strukturmotiv der isolierten [1],[1]Disilametallocenophane weist zwei Silicium-Brücken zwischen dem Metall-Atom und den Cyclopentadienyl-Ringen auf. Diese Reaktionen stellen zudem die ersten Beispiele einer intramolekularen Aktivierung einer E–E-Brücke von [2]Metallocenophanen dar. Mittels Röntgenstrukturanalyse erhaltene Festkörperstrukturen sowie quantenchemische Rechnungen weisen auf signifikante Molekülspannung in den Bis(ansa)-Komplexen hin. Aufgrund der höheren Stabilität und dem besseren Zugang der Molybdän-Spezies im Vergleich zum Wolfram-Analogon wurden ausgehend von diesem Derivat Reaktivitätsstudien gegenüber sauren und nukleophilen Reagenzien, ungesättigten organischen Substraten sowie niedervalenten Pt(0)-Verbindungen durchgeführt. N2 - The present work is focused on the synthesis, structure and characterization of novel [2]disilametallocenophanes. The structural parameters of the paramagnetic complexes [(Me2Si)2(η5-C5H4)2M] (M = Co, Ni) and the cationic compound [(Me2Si)2(η5-C5H4)2Co][PF6] indicate the presence of moderate molecular strain. The facile activation of the ansa-bridge is shown by the reaction of [(Me2Si)2(η5-C5H4)2Ni] with the Ni(0) species [(tBuNC)4Ni], which led to the dinuclear complex [(Me2Si)(η5-C5H4)Ni(CNtBu)]2 by cleavage of the Si–Si bond. The niobium compound [(Me2Si)2(η5-C5H4)2NbH3] was shown to be thermally unstable, whereas the appropriate ansa complexes of molybdenum and tungsten [(Me2Si)2(η5-C5H4)2MH2] (M = Mo, W) react photochemically by reductive elimination of hydrogen and oxidative addition of the Si–Si bond to the metal, thus forming bis(ansa)-complexes. The unusual structural motif of the isolated [1],[1]disilametallocenophanes depicts two silicon atoms each bridging the metal atom and one cyclopentadienyl ring. Hence, the reactions represent the first emamples of an intramolecular activation of a E–E brigde of [2]metallocenophanes. The X-ray structures as well as the results of DFT calculations reveal significant molecular strain in the bis(ansa) complexes. Due to the higher stability and the more facile access to the molybdenum species compared to the tungsten analogue, reactivity studies were limited to the molybdenum compound. Investigations regarding the reactivity of the [1],[1]disilamolybdenocenophane towards acidic and nucleophilic reagents, unsaturated organic substrates as well as zerovalent platinum complexes were performed. KW - Sandwich-Verbindungen KW - Metallocene KW - Disilanderivate KW - Metallocenophane KW - metallocenophanes Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-54692 ER - TY - THES A1 - Sigritz, Rainer T1 - Synthese, Struktur und Reaktivität von ansa-Ferrocenen T1 - Synthesis, Structure and Reactivity of ansa-Ferrocenes N2 - In der vorliegenden Arbeit wird die Synthese von [2]Ferrocenophanen auf verschiedenen Wegen gezeigt. Neben der vollständigen Charakterisierung der Verbindungen wird auch deren Reaktivität untersucht. So wird gezeigt, dass mit den Elementen der Gruppe 16, sowie mit späten Übergangsmetallkomplexen eine Insertion in die Element-Element Bindung der Brücke statt finden kann. Darüber hinaus wird ausgehend von einem [2]Diboraferrocenophan eine katalytische Syntheseroute zur Diborierung von Alkinen entwickelt, sowohl unter homogenen als auch unter heterogen Bedingungen. Ausgehend von einem [2]Ferrocenophan wird eine neue Syntheseroute zur Darstellung von Ferrocenylboronsäureestern gezeigt. N2 - Within this thesis, the synthesis of [2]ferrocenophanes is presented in different ways. Besides, the compounds are not only fully characterized, but also their reactivity is examined. It is shown, that on the addition of group 16 elements or late transition metal complexes, an insertion into the element-element bond can take place. Furthermore, starting from a [2]diboraferrocenophane, a synthetic protocol for the homogeneous and the heterogeneous catalyzed diboration of alkynes was developed. Starting from a [2]ferrocenophane, a new pathway for the synthesis of ferrocenyl boronic acids is presented. KW - Ferrocenderivate KW - Cyclophane KW - Ferrocen KW - Metallocene KW - Ringspannung KW - ferrocenophanes KW - diboration KW - oxidative addition Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-50003 ER -