TY - JOUR T1 - Search for pair-produced long-lived neutral particles decaying to jets in the ATLAS hadronic calorimeter in pp collisions at \(\sqrt{2}\)=8 TeV JF - Physics Letters B N2 - The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3 fb−120.3 fb\(^{−1}\) of data collected in proton–proton collisions at \(\sqrt{2}\)=8 TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeV to 900 GeV, and a long-lived neutral particle mass from 10 GeV to 150 GeV. KW - new physics KW - long-lived neutral particle KW - high-energy collider experiment Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136099 VL - 743 ER - TY - JOUR T1 - Search for H→γγH→γγ produced in association with top quarks and constraints on the Yukawa coupling between the top quark and the Higgs boson using data taken at 7 TeV and 8 TeV with the ATLAS detector JF - Physics Letters B N2 - A search is performed for Higgs bosons produced in association with top quarks using the diphoton decay mode of the Higgs boson. Selection requirements are optimized separately for leptonic and fully hadronic final states from the top quark decays. The dataset used corresponds to an integrated luminosity of 4.5 fb\(^{−1}\) of proton–proton collisions at a center-of-mass energy of 7 TeV and 20.3 fb−120.3 fb\(^{−1}\) at 8 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. No significant excess over the background prediction is observed and upper limits are set on the \(t\overline{t}H\) production cross section. The observed exclusion upper limit at 95% confidence level is 6.7 times the predicted Standard Model cross section value. In addition, limits are set on the strength of the Yukawa coupling between the top quark and the Higgs boson, taking into account the dependence of the \(t\overline{t}H\) and tH   cross sections as well as the H→γγH→γγ branching fraction on the Yukawa coupling. Lower and upper limits at 95% confidence level are set at −1.3 and +8.0 times the Yukawa coupling strength in the Standard Model. KW - Higgs boson KW - diphoton decay KW - top quark KW - Yukawa coupling Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136100 VL - 740 ER - TY - THES A1 - Bachschmidt, Theresa T1 - Magnetic Resonance Imaging in Proximity to Metal Implants at 3 Tesla T1 - Magnetresonanzbildgebung nahe metallischer Implantate bei 3 Tesla N2 - Magnetic resonance imaging is derogated by the presence of metal implants and image quality is impaired. Artifacts are categorized according to their sources, the differences in susceptibility between metal and tissue and the modulation of the magnetic radiofrequency (RF) transmit field. Generally, these artifacts are intensified at higher field strength. The purpose of this work is to analyze the efficiency of current methods used for metal artifact reduction at 3T and to investigate improvements. The impact of high-bandwidth RF pulses on susceptibility-induced artifacts is tested. In addition, the benefit of a two-channel transmit system with respect to shading close to total hip replacements and other elongated metal structures in parallel to the magnetic field is analyzed. Local transmit/receive coils feature a higher peak B1 amplitude than conventional body coils and thus enable high-bandwidth RF pulses. Susceptibility-induced through-plane distortion relates reciprocally to the RF bandwidth, which is evaluated in vitro for a total knee arthroplasty. Clinically relevant sequences (TSE and SEMAC) with conventional and high RF pulse bandwidths and different contrasts are tested on eight patients with different types of knee implants. Distortion is rated by two radiologists. An additional analysis assesses the capability of a local spine transmit coil. Furthermore, B1 effects close to elongated metal structures are described by an analytical model comprising a water cylinder and a metal rod, which is verified numerically and experimentally. The dependence of the optimal polarization of the transmit B1 field, creating minimum shading, on the position of the metal is analyzed. In addition, the optimal polarization is determined for two patients; its benefit compared to circular polarization is assessed. Phantom experiments confirm the relation of the RF bandwidth and the through-plane distortion, which can be reduced by up to 79% by exploitation of a commercial local transmit/receive knee coil at 3T. On average, artifacts are rated “hardly visible” for patients with joint arthroplasties, when high-bandwidth RF pulses and SEMAC are used, and for patients with titanium fixtures, when high-bandwidth RF pulses are used in combination with TSE. The benefits of the local spine transmit coil are less compared to the knee coil, but enable a bandwidth 3.9 times as high as the body coil. The modulation of B1 due to metal is approximated well by the model presented and the position of the metal has strong influence on this effect. The optimal polarization can mitigate shading substantially. In conclusion, through-plane distortion and related artifacts can be reduced significantly by the application of high-bandwidth RF pulses by local transmit coils at 3T. Parallel transmission offers an option to substantially reduce shading close to long metal structures aligned with the magnetic field. Effective techniques dedicated for metal implant imaging at 3T are introduced in this work. N2 - Metallimplantate beeinträchtigen die Funktionsweise der Magnetresonanztomographie und verschlechtern die Bildqualität. Die Artefakte werden entsprechend ihres Ursprungs kategorisiert, in einerseits Suszeptibilitätsunterschiede zwischen Metall und Gewebe und andererseits die Modulation des B1-Feldes. Im Allgemeinen verstärken sich diese Artefakte bei höheren Feldstärken. Das Ziel dieser Arbeit ist es, die Effizienz vorhandener Methoden zur Artefaktreduktion bei 3T zu bewerten und mögliche Verbesserungen herauszuarbeiten. Der Einfluss von breitbandigen Hochfrequenz-Pulsen (HF-Pulsen) auf Suszeptibilitätsartefakte wird untersucht. Zusätzlich wird der Einfluss eines Zwei-Kanal Sendesystems auf Abschattungen analysiert, die in der Nähe von Hüftimplantaten und anderen länglichen Implantaten auftreten, welche parallel zu B0 liegen. Im Gegensatz zu konventionellen Ganzkörper-Sendespulen erlauben lokale Sende-/Empfangsspulen eine höhere maximale B1-Amplitude, die breitbandigere HF-Pulse ermöglicht. Die reziproke Abhängigkeit der Suszeptibilitätsartefakte in Schichtrichtung zur HF-Bandbreite wird in vitro für eine Kniegelenkplastik evaluiert. An acht Patienten mit verschiedenen Knieimplantaten werden klinisch relevante Sequenzen (TSE und SEMAC) mit konventionellen und breitbandigen HF-Pulsen in verschiedenen Kontrasten getestet und die Verzerrungen werden von zwei Radiologen bewertet. Eine weitere Studie untersucht das Potenzial einer lokalen Sendespule für die Wirbelsäule. Darüberhinaus werden B1-Effekte nahe länglicher Metallstrukturen durch ein analytisches Modell beschrieben, das numerisch und experimentell überprüft wird. Des Weiteren wird die Abhängigkeit der optimalen Polarisation des B1-Feldes, die minimale Abschattung verursacht, von der Position des Metalls untersucht. Für zwei Patienten wird die optimale Polarisation bestimmt und deren Vorteil gegenüber der zirkularen Polarisation analysiert. Phantomversuche bestätigen die Abhängigkeit zwischen HF-Bandbreite und der Schichtverzerrung, die durch die Verwendung einer lokalen Kniespule mit Sende- und Empfangsfunktion bei 3T um 79% reduziert werden kann. Die Artefakte bei Patienten mit Vollimplantaten, bzw. Titanimplantaten, werden als "kaum sichtbar" bewertet, wenn SEMAC, bzw. TSE, mit breitbandigen HF-Pulsen kombiniert appliziert wird. Im Vergleich zur lokalen Kniespule fallen die Vorteile der lokalen Wirbelsäulen-Sendespule geringer aus; dennoch kann die 3,9-fache HF-Bandbreite der Ganzkörpersendespule erreicht werden. Die B1-Modulation aufgrund von Metall wird im dargestellten Modell gut wiedergegeben und die Position des Metalls im Objekt hat großen Einfluss auf den Effekt. Die Verwendung der optimalen Polarisation kann Abschattungen stark reduzieren. Zusammenfassend können Artefakte aufgrund von Schichtverzerrungen durch die Verwendung lokaler Sendespulen und breitbandiger HF-Pulse bei 3T stark abgeschwächt werden. Die individuelle Wahl der Polarisation des B1-Feldes bietet eine gute Möglichkeit, Abschattungen in der Nähe von länglichen Metallstrukturen zu reduzieren, soweit diese näherungsweise parallel zu B0 ausgerichtet sind. Somit werden in dieser Arbeit wirksame Methoden zur Metallbildgebung bei 3T eingeführt. KW - Kernspintomografie KW - Metallimplantat KW - Artefakt KW - 3 Tesla KW - Implantat KW - Verzerrung KW - Abschattung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-135690 ER - TY - THES A1 - Praetorius, Christian Michael T1 - Ce M4,5 XAS and XMCD as Local Probes for Kondo and Heavy Fermion Materials - A Study of CePt5/Pt(111) Surface Intermetallics - T1 - Ce M4,5 XAS und XMCD als Lokale Sonden Für Kondo- und Schwere-Fermionen-Materialien - Eine Studie an intermetallischen CePt5/Pt(111) Oberflächenverbindungen - N2 - The aim of the present thesis is to explore the potential of X-ray magnetic circular dichroism(XMCD) experiments on gaining new insights into Kondo and heavy fermion materials. XMCD, which is derived from X-ray absorption spectroscopy (XAS), allows probing magnetic polarization specific to the different elements in a material and to their atomic orbitals. In particular, at the Ce M4,5 edges the method is sensitive to the localized 4f level, which provides the magnetic impurity moment responsible for Kondo physics in Ce compounds. Hence, Ce M4,5 XMCD is ideally suited to investigate local magnetism in the presence of interaction of impurity and conduction electrons in such materials. As a model material, CePt5/Pt(111) surface intermetallics were chosen for the present study. This thin-film material can be prepared by well-defined procedures involving molecular beam epitaxy. Crystalline Ordered samples are obtained by exploiting the single-crystallinity of the Pt(111) substrate. The surface character of thin films ideally matches the probing depth of soft X-ray spectroscopy in the total electron yield mode. The XMCD and XAS experiments, taking into account dependence on temperature, angle of incidence, sample thickness and external magnetic field, revealed the presence of four relevant energy scales that influence the magnetic response: 1. The 4f level in CePt5/Pt(111) is subject to significant crystal field (CF) splitting, which leads to reorganization of the six j = 5/2 sublevels. The hexagonal symmetry of the crystal structure conserves mj as a good quantum number. The proposed CF scheme, which is derived from measurements of the paramagnetic susceptibility by XMCD as well as linear dichroism in XAS, consists of nearly degenerate |1/2> and |3/2> doublets with the |5/2> doublet excited by E5/2 = 15 ... 25 meV. 2. Single impurity Kondo interaction significantly couples the magnetic moments of the impurity and conduction electrons. A signature thereof is the f0 -> f1 contribution to Ce M4,5 XAS, the strength of which can be tuned by control of the sample thickness. This finding is in line with the observation of reduced effective 4f moments as detected by XMCD. 3. Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction induces ferromagnetic correlations on the impurity lattice, which induces a positive Curie-Weiss temperature in the temperature-dependent inverse susceptibility. 4. Indications for the transition to a coherent heavy fermion state are found in the inverse susceptibility at T ~ 20 K; the ferromagnetic ground state is not observed. The fielddependence of the magnetic moment in the coherent state can be interpreted in terms of a metamagnetic transition. This allows studying basic characteristics of the renormalized band structure of a heavy fermion system by XMCD. The disentanglement of these different contributions to the 4f magnetism not only required extensive Ce M4,5 XAS and XMCD data, but also a thorough structural characterization of the material, a fundamental study of the Ce M4,5 line shape in relation to the degree of 4f hybridization and the development of a model for the paramagnetic susceptibility. The unit cell dimensions and sample morphology of CePt5/Pt(111) intermetallics were studied by low-energy electron diffraction (LEED) and scanning transmission electron microscopy (STEM). These experiments showed that well-defined intermetallic films form on top of the substrate. This lead to introduction of the film thickness t, measured in unit cells (u.c.), as a key feature to characterize the samples. Systematic LEED measurements in the thickness range t ~ 1 ... 15 u.c. allowed identification of six different phases, which could be interpreted as resulting from the same crystal structure with different rotational alignments and lattice constants. An accurate determination of the surface lattice constant at t ~ 3 u.c. could be achieved by interpretation of additional superstructure spots as arising from a well-defined combination of substrate and film lattices. The thicknessdependence of the lateral lattice constant could be explained in terms of lattice relaxation. Confirmation of the CePt5 stoichiometry and structure was performed by use of thicknessdependent XAS and a representative LEED-IV study. The results of this study indicate that the intermetallic films exhibit hexagonal CaCu5 structure over the entire range of thicknesses that were studied. The terminating layer consists purely of Pt with one additional Pt atom per unit cell compared to the bulk structure. The line shape of Ce M4,5 spectra was analyzed with the help of full multiplet calculations. Experimentally, characteristic variations of the line shape were observed with increasing f0 -> f1 contribution. The calculations show that these variations are not due to an admixture of j = 7/2 character to the ground state, as often stated in the literature. As alternatives, this observation can be explained by either considering an additional contribution to the spectrum or by assumption of an asymmetric lifetime profile. The model that was developed for the inverse paramagnetic susceptibility contains the hexagonal crystal field, magnetic coupling of the impurity moments in a mean field scheme and Kondo screening. The latter is included phenomenologically by screening factors for the effective moment. Assumption of doublet-specific screening factors, which means that the degree of Kondo interaction depends on the mj character of the 4f sublevels, allows satisfactory reproduction of the experimental data. N2 - Das Ziel der vorliegenden Arbeit ist die Untersuchung der Frage, welche neuen Einsichten in Kondo- und schwere Fermionen-Materialien mittels Röntgenzirkulardichroismus-Experimenten (XMCD) gewonnen werden können. Die Methode XMCD, die sich aus der Röntgenabsorption (XAS) ableitet, detektiert die magnetischen Polarisation gezielt für die verschiedenen Elemente in einem Material und für deren Atomorbitale. Insbesondere an den Ce M4,5 Absorptionskanten bietet die Methode Zugang zum lokalisierten 4f Niveau und damit zum magnetische Störstellenmoment in Ce-Verbindungen, welches eine Voraussetzung für Kondo-Physik ist. Ce M4,5 XMCD ist daher bestens geeignet, um lokalen Magnetismus in Gegenwart von Wechselwirkung zwischen Störstellen- und Leitungselektronen zu studieren. Als Modellmaterial wurde für diese Arbeit CePt5/Pt(111), eine oberflächennahe intermetallische Verbindung, gewählt. Die Präparation dieses Dünnfilmmaterials mithilfe von Molekularstrahlepitaxie kann bestens kontrolliert werden. Die Ausnutzung des einkristallinen Pt(111) Substrats liefert kristallin geordnete Proben. Der Oberflächencharakter der Filme ist gut auf die Informationstiefe von Absorptionsspektroskopie im weichen Röntgenbereich abgestimmt, wenn im Modus totaler Elektronenausbeute gemessen wird. Die XAS- und XMCD-Experimente unter Variation von Temperatur, Einfallswinkel, Probendicke und Magnetfeld lassen die Gegenwart von vier relevanten Energieskalen für das magnetische Verhalten erkennen: 1. Das 4f Niveau in CePt5/Pt(111) ist einer deutlichen Kristallfeldaufspaltung unterworfen, welche eine Neuordnung der sechs j = 5/2 Unterniveaus bewirkt. Dabei erhält die hexagonale Symmetrie der Kristallstruktur mj als gute Quantenzahl. Basierend auf Messungen der paramagnetischen Suszeptibilität mit XMCD und des Lineardichroismus in XAS wird ein Niveauschema vorgeschlagen, das aus beinahe entarteten |1/2> und |3/2 > Dubletts besteht, das |5/2> Dublett folgt bei einer höheren Energie von E5/2 = 15 ... 25 meV. 2. Einzelstörstellen-Kondowechselwirkung bewirkt eine signifikante Kopplung der magnetischen Momente von Störstellen und Leitungszuständen. Dies ist anhand der f0 -> f1-Anteile in Ce M4,5 XAS ersichtlich, deren Stärke über die Probendicke kontrolliert werden kann. In Übereinstimmung damit werden reduzierte effektive 4f-Momente mit XMCD beobachtet. 3. Ruderman-Kittel-Kasuya-Yosida (RKKY) Wechselwirkung erzeugt ferromagnetische Kopplung auf dem Störstellengitter, was zu einer positiven Curie-Weiss-Temperatur in der temperaturabhängigen inversen Suszeptibilität führt. 4. Die inverse Suszeptibilität erlaubt Rückschlüsse auf einen Übergang in den kohärenten schwere-Fermionen-Zustand bei T ~ 20 K. Ein ferromagnetischer Zustand wurde nicht beobachtet. Die Magnetfeldabhängigkeit des magnetischen Moments in diesem Bereich kann im Sinne eines metamagnetischen Übergangs interpretiert werden. Dies eröffnet die Möglichkeit, grundlegende Charakteristika der renormalisierten Bandstruktur eines schweren Fermionen-Systems mittels XMCD zu erforschen. Die Entschlüsselung dieser unterschiedlichen Beiträge zum 4f-Magnetismus erforderte nicht nur umfangreiche Ce M4,5 XAS und XMCD Experimente, sondern auch eine gründliche strukturelle Charakterisierung des Materials, eine grundlegende Studie der spektralen Linienform in Abhängigkeit vom Grad der 4f-Hybridisierung sowie die Entwicklung eines Modells für die paramagnetische Suszeptibilität. Die Abmessungen der Einheitszelle sowie die Filmmorphologie wurden mit niederenergetischer Elektronenbeugung (LEED) und Rastertransmissionselektronenmikroskopie (STEM) analysiert, wobei sich zeigte, dass die intermetallische Verbindung wohldefinierte Filme auf dem Substrat bildet. Daher wird die Filmdicke t, gemessen in Einheitszellen (u.c.), als Hauptmerkmal zur Charakterisierung der Proben eingeführt. Mittels systematische LEED-Messungen im Dickenbereich t ~ 1 ... 15 u.c. wurden sechs verschiedene Phasen identifiziert, welche auf eine gemeinsame Kristallstruktur mit unterschiedlichem Drehwinkel zum Substrat und unterschiedlichen Gitterkonstanten zurückgeführt werden. Bei einer Dicke von t ~ 3 u.c. konnte eine genaue Bestimmung der Oberflächengitterkonstante durchgeführt werden, indem zusätzliche Überstrukturreflexe als Ergebnis von kombinierter Streuung an Substrat- und Filmgitter gedeutet wurden. Die Dickenabhängigkeit der Gitterkonstante kann als abnehmende Gitterverspannung erklärt werden. Die angenommene Stöchiometrie CePt5 und die zugehörige Kristallstruktur konnten mithilfe von dickenabhängigen XAS-Experimenten und einer repräsentativen LEED-IV Studie bestätigt werden. Die Ergebnisse der Letzteren weisen darauf hin dass die Filme im gesamten untersuchten Dickenbereich die CaCu5-Struktur aufweisen. Die Oberflächenabschlusslage besteht rein aus Pt und besitzt im Vergleich zum Volumengitter ein zusätzliches Pt-Atom pro Einheitszelle. Die Linienform von Ce M4,5 Spektren wurde mittels Gesamtmultiplett-Rechnungen analysiert. Die experimentellen Daten zeigen charakteristische Variationen der Linienform in Abhängigkeit des f0 -> f1-Gewichts. Mit Rechnungen konnte gezeigt werden, dass diese Variationen nicht durch eine signifikante Beimischung von j = 7/2-Charakter zum Grundzustand erklärt werden können, was in der Literatur häufig angeführt wird. Zwei Alternativen wurden als mögliche Erklärungen für die Beobachtungen entwickelt: Die Linienformänderungen können entweder durch einen zusätzlichen Beitrag zum Spektrum oder durch asymmetrische Linienprofile erzeugt werden. Das Modell für die inverse paramagnetische Suszeptibilität beinhaltet das hexagonale Kristallfeld, magnetische Kopplung auf dem Strörstellengitter in Molekularfeldnäherung und Kondoabschirmung. Letztere ist phänomenologisch durch Abschirmfaktoren für das effektive Moment berücksichtigt. Eine zufriedenstellende Widergabe der experimentellen Daten konnte durch die Einführung von Dublett-spezifischen Abschirmfaktoren erreicht werden, was darauf hindeutet, dass das Ausmaß der Kondowechselwirkung vom mj-Charakter der 4f Unterniveaus abhängt. KW - Magnetischer Röntgenzirkulardichroismus KW - Schwere-Fermionen-System KW - Kondo-Effekt KW - CePt5 KW - Röntgenabsorptionsspektroskopie KW - LEED Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-132504 ER - TY - THES A1 - Weber, Christian T1 - Electrochemical Energy Storage: Carbon Xerogel-Manganese Oxide Composites as Supercapacitor Electrode Materials T1 - Elektrochemische Energiespeicher: Kohlenstoff Xerogel-Manganoxid Komposite als Elektrodenmaterial für Superkondensatoren N2 - Electrochemical double layer capacitors (EDLC), most commonly referred to as “supercapacitors”, have gained increasing scientific and commercial interest in recent years. Purely electrostatic charge storage processes allow charge- and discharge cycles in the second-time scale, exhibiting a theoretical capacitance in the order of 100 F per gram of electrode material, thereby providing efficient recuperation devices for electromechanical processes, for example. Introducing electrochemically active materials such as manganese oxides into the supercapacitor electrode, allows to combine the double-layer storage with a battery-like storage process, leading to capacitance that can be up to two orders of magnitude larger than those in EDLC. In the present work, an electroless deposition approach of manganese oxide on a carbon scaffold is adapted and further investigated. The carbon material is derived from an organic xerogel, which in turn is prepared via a sol-gel process, allowing tailoring of the structural properties of the carbon, making it an ideal model system to study the relation between morphology and electrochemical performance in the carbon-manganese oxide hybrid electrode. In the first part of this thesis, a variation of manganese oxide deposition time at a low concentration of precursor solution is analyzed. Mass uptakes reach up to 58 wt.%, leading to an increase of volumetric capacitance by a factor 5, however reducing the dynamic performance of the electrode. The structural characterization gives hints on the deposition location of the active material either in the intra-particular pores of the carbon backbone or on the enveloping surface area of the particles forming the backbone. In order to comprehensively answer the question of the location of the active material within the hybrid electrode, the particle size of the carbon backbone and therefore the enveloping surface area of the carbon particles was varied. For samples with high mass uptakes, scanning electron microscopy (SEM) images show a layer thickness of 27 nm of active material around the carbon particles. In order to quantitatively investigate this layer morphology, even for low mass uptakes where no layer is visible in SEM images, a model interpreting data from anomalous small angle X-ray scattering (ASAXS) measurements was developed. The results confirm the presence of a layer around the carbon particles, exhibiting a layer thickness ranging from 3 to 26 nm. From an electrochemical point of view, carbon backbones with a large enveloping surface area will lead to high mass uptakes in the electroless deposition process and therefore lead to high capacitance of the electrode. However, for future application, electrodeposition approaches should be investigated in detail, since no deposits will form on the interface between carbon backbone and current collector, leading to a better dynamic performance of the hybrid electrode. Furthermore, the ASAXS-method should be promoted and applied on other material systems, since this technique allows to draw important conclusions and allows to deduce integral and quantitative information towards a rational design of high performance electrodes. N2 - In den letzten Jahren haben elektrochemische Doppelschichtkondensatoren, meist als “Supercaps” bezeichnet, wachsendes wissenschaftliches und kommerzielles Interesse erfahren. Rein elektrostatische Ladungsspeicherungsprozesse erlauben Lade- und Entladezyklen im Sekundenregime, bei einer theoretischen Kapazität in der Größenordnung von 100 Farad pro Gramm Elektrodenmaterial. Damit steht beispielsweise ein ideales Bauteil zur Energierekuperation in elektromechanischen Prozessen zur Verfügung. Die Verbindung der Doppelschichtelektrode mit elektrochemisch aktiven Materialien, wie zum Beispiel Manganoxiden, erlaubt eine Kombination der elektrostatischen Ladungsspeicherung mit batterieähnlichen Ladungsspeicherungsprozessen. Dies führt zu Kapazitätswerten, die bis zu zwei Größenordnungen über den Kapazitätswerten im Doppelschichtkondensator liegen können. In der vorliegenden Arbeit wurde ein nasschemischer Abscheidungsprozess für die Deposition von Manganoxid auf einem Kohlenstoffgerüst angewendet und weitergehend untersucht. Das Kohlenstoffmaterial wurde aus einem organischem Xerogel hergestellt, welches wiederum durch einen Sol-Gel Prozess dargestellt wurde. Diese Vorgehensweise erlaubt eine gezielte Beeinflussung der strukturellen Eigenschaften des Kohlenstoffes. Dadurch wird das Material zum idealen Modellsystem, um den Einfluss der Morphologie auf die elektrochemischen Eigenschaften der Kohlenstoff-Manganoxid Hybridelektrode zu untersuchen. Im ersten Teil der Arbeit wurde die Abscheidungsdauer des Manganoxids bei einer niedrigen Ausgangskonzentration in der Vorstufe systematisch variiert und die resultierenden Elektroden analysiert. Die MnO2 Massenaufnahme erreichte bis zu 58 wt.%, was zu einer Steigerung der volumetrischen Kapazität um einen Faktor 5 führte. Der Preis für diese Steigerung liegt jedoch in einer Reduktion der Lade- bzw. Entladegeschwindigkeit. Die strukturelle Charakterisierung der Hybridelektroden deutet auf eine Abscheidung des MnO2 in den intrapartikulären Poren der Kohlenstoffpartikel oder auf deren einhüllenden Oberfläche hin. Um den Abscheidungsort des aktiven Materials innerhalb der Hybridelektrode eindeutig zu bestimmen, wurde die Größe der Kohlenstoffpartikel und damit die externe Oberfläche des Kohlenstoffgerüstes systematisch variiert. Aufnahmen mittels Rasterelektronenmikroskopie (REM) zeigen eine Schicht von MnO2 um die Kohlenstoffpartikel mit einer Dicke von bis zu 27 nm für Proben mit Massenzuwächsen von bis zu 130 %. Um die Schichtdicke auch für geringe Massenaufnahmen, bei denen im REM keine Schicht erkennbar ist, quantitativ untersuchen zu können, wurde ein Modell zur Analyse von anomaler Röntgenkleinwinkelstreuung (ASAXS) entwickelt. Die Ergebnisse bestätigen die Existenz einer Schicht um die Kohlenstoffpartikel, deren Dicke zwischen 3 und 26 nm liegt. Aus elektrochemischer Sicht wird ein Kohlenstoffgerüst mit großer einhüllender Oberfläche zu einer großen Massenaufnahme im nasschemischen Abscheidungsprozess und damit zu hohen Kapazitätswerten führen. Für eine zukünftige Anwendung sollten jedoch auch elektrochemische Abscheidungsprozesse genau untersucht werden, da bei dieser Methode kein Material auf der Kontaktfläche zwischen Stromabnehmer und Elektrode abgeschieden wird. Dadurch ist eine Verbesserung der elektrochemischen Performance der Hybridelektrode zu erwarten. Weiterhin sollte die ASAXS-Methode weiterentwickelt und auf andere Materialsysteme angewendet werden, da diese Technik wichtige Schlüsse erlaubt, sowie die Bestimmung integraler und quantitativer Information, die zu gezieltem Design von hocheffizienten Elektroden führen wird. KW - Superkondensator KW - Electrochemical energy storage KW - ASAXS KW - Supercapacitor KW - Energiespeicher KW - Experimental physics Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130748 ER - TY - THES A1 - Bieker, Steffen T1 - Time and Spatially Resolved Photoluminescence Spectroscopy of Hot Excitons in Gallium Arsenide T1 - Orts- und Zeitaufgelöste Photolumineszenzspektroskopie Heißer Exzitonen in Galliumarsenid N2 - The present thesis investigates the impact of hot exciton effects on the low-temperature time and spatially resolved photoluminescence (PL) response of free excitons in high-purity gallium arsenide (GaAs). The work at hand extends available studies of hot carrier effects, which in bulk GaAs have up to now focused on hot electron populations. In crucial distinction from previous work, we extensively study the free exciton second LO-phonon replica. The benefit of this approach is twofold. First, the two LO phonon-assisted radiative recombination allows to circumvent the inherent interpretation ambiguities of the previously investigated free exciton zero-phonon line. Second, the recombination line shape of the second LO-phonon replica provides direct experimental access to the exciton temperature, thereby enabling the quantitative assessment of hot exciton effects. In the first part of the thesis, we address the influence of transient cooling on the time evolution of an initially hot photocarrier ensemble. To this end, we investigate time-resolved photoluminescence (TRPL) signals detected on the free exciton second LO-phonon replica. Settling a long-standing question, we show by comparison with TRPL transients of the free exciton zero-phonon line that the slow free exciton photoluminescence rise following pulsed optical excitation is dominated by the slow buildup of a free exciton population and not by the relaxation of large K-vector excitons to the Brillouin zone center. To establish a quantitative picture of the delayed photoluminescence onset, we determine the cooling dynamics of the initially hot photocarrier cloud from a time-resolved line shape analysis of the second LO-phonon replica. We demonstrate that the Saha equation, which fundamentally describes the thermodynamic population balance between free excitons and the uncorrelated electron-hole plasma, directly translates the experimentally derived cooling curves into the time-dependent conversion of unbound electron-hole pairs into free excitons. In the second part of the thesis, we establish the impact of hot exciton effects on low-temperature spatially resolved photoluminescence (SRPL) studies. Such experiments are widely used to investigate charge carrier and free exciton diffusion in semiconductors and semiconductor nanostructures. By SRPL spectroscopy of the second LO-phonon replica, we show that above-band gap focused laser excitation inevitably causes local heating in the carrier system, which crucially affects the diffusive expansion of a locally excited exciton packet. Undistorted free exciton diffusion profiles, which are correctly described by the commonly used formulation of the photocarrier diffusion equation, are only observed in the absence of spatial temperature gradients. At low sample temperatures, the reliable determination of free exciton diffusion coefficients from both continuous-wave and time-resolved SRPL spectroscopy requires strictly resonant optical excitation. Using resonant laser excitation, we observe the dimensional crossover of free exciton diffusion in etched wire structures of a thin, effectively two-dimensional GaAs epilayer. When the lateral wire width falls below the diffusion length, the sample geometry becomes effectively one-dimensional. The exciton diffusion profile along the wire stripe is then consistently reproduced by the steady-state solution to the one-dimensional diffusion equation. Finally, we demonstrate the formation of macroscopic free and bound exciton photoluminescence rings in bulk GaAs around a focused laser excitation spot. Both ring formation effects are due to pump-induced local heating in the exciton system. For a quantitative assessment of the mechanism underlying the free exciton ring formation, we directly determine the exciton temperature gradient from a spatially resolved line shape analysis of the free exciton second LO-phonon replica. We demonstrate that a pump-induced hot spot locally modifies the thermodynamic population balance between free excitons and unbound electron-hole pairs described by the Saha equation, which naturally explains the emergence of macroscopic free exciton ring structures. In summary, we demonstrate that quantitative consideration of hot exciton effects provides a coherent picture both of the time-domain free exciton luminescence kinetics and of the distinct spatially resolved photoluminescence patterns developing under the influence of spatial photocarrier diffusion. N2 - Die vorliegende Arbeit untersucht den Einfluss von Überheizungseffekten aufgrund nichtresonanter optischer Anregung auf die orts- und zeitaufgelöste Photolumineszenz-Dynamik freier Exzitonen in hochreinem Galliumarsenid (GaAs). Die Arbeit baut damit vorhandene Studien von Überheizungseffekten aus, welche sich in Volumen-GaAs vornehmlich auf die Untersuchung heißer Elektronenpopulationen konzentriert haben. In Abgrenzung zu vorherigen Studien erfolgt eine umfängliche Untersuchung der zweiten LO-Phonon Replik des freien Exzitons. Dieser Ansatz bietet zweifachen Nutzen. Zum einen können durch die Betrachtung des strahlenden Zerfalls freier Exzitonen unter gleichzeitiger Emission zweier LO Phononen die inhärenten Mehrdeutigkeiten bei der Interpretation der direkten Lumineszenz freier Exzitonen umgangen werden. Des Weiteren gestattet eine Linienformanayse der zweiten LO-Phonon Replik die direkte experimentelle Bestimmung der Exzitonentemperatur und schafft damit die Voraussetzung zur quantitativen Untersuchung von Überheizungseffekten im Exzitonensystem. Im ersten Teil der Arbeit wird der Einfluss des transienten Kühlens auf die Zeitentwicklung eines anfänglich heißen Ladungsträgerensembles untersucht. Durch einen Vergleich des Signalverlaufs der direkten Exzitonenlumineszenz mit der zweiten LO-Phonon Replik kann zweifelsfrei gezeigt werden, dass der verzögerte Anstieg der Exzitonenlumineszenz durch den relativ langsamen Aufbau einer Exzitonenpopulation dominiert wird und nicht lediglich die Relaxation von Exzitonen mit großen K-Vektoren zum Zentrum der Brillouinzone widerspiegelt. Zum quantitativen Verständnis des verzögerten Lumineszenzanstiegs wird das Abkühlverhalten des anfänglich heißen Ladungsträgerensembles durch eine zeitaufgelöste Linienformanalyse der zweiten LO-Phonon Replik bestimmt. Es wird gezeigt, dass die Saha-Gleichung, welche das thermodynamische Populations-Gleichgewicht zwischen freien Exzitonen und dem unkorrelierten Elektron-Loch-Plasma beschreibt, die experimentell bestimmten Kühlkurven direkt in die zeitabhängige Umwandlung von ungebundenen Elektron-Loch-Paaren in freie Exzitonen übersetzt. Im zweiten Teil der Arbeit werden die Auswirkungen von Überheizungseffekten im Exzitonensystem auf ortsaufgelöste Photolumineszenzmessungen bei tiefen Gittertemperaturen untersucht. Experimente dieser Art werden häufig zur Bestimmung von Ladungsträger- und Exzitonen-Diffusionskoeffizienten in Halbleitern und Halbleiter-Nanostrukturen genutzt. Durch die ortsaufgelöste Auswertung der zweiten LO-Phonon Replik kann gezeigt werden, dass fokussierte nichtresonante Laseranregung unweigerlich zu einer lokalen Überheizung des Ladungsträgersystems führt. Solche optisch induzierten Temperaturgradienten beeinflussen entscheidend die diffusive Ausbreitung eines lokal erzeugten Exzitonen-Pakets. Unverfälschte Diffusionsprofile, die korrekt durch die üblicherweise herangezogene Formulierung der Diffusionsgleichung beschrieben werden, sind ausschließlich bei Nichtanwesenheit von räumlichen Temperaturgradienten beobachtbar. Die verlässliche Bestimmung von Exzitonen-Diffusionskoeffizienten sowohl mittels zeitaufgelöster als auch stationärer ortsaufgelöster Photolumineszenzspektroskopie erfordert daher scharf resonante optische Anregung. Unter resonanter Laseranregung kann der Übergang von einem effektiv zweidimensionalen zu einem effektiv eindimensionalen Diffusionsverhalten freier Exzitonen in geätzten GaAs-Strukturen beobachtet werden. Die untersuchten Streifenstrukturen werden in eine dünne, effektiv zweidimensionale GaAs-Epischicht geätzt. Der dimensionale Übergang vollzieht sich, wenn die laterale Abmessung der geätzten Struktur die Diffusionslänge unterschreitet. Das stationäre Exzitonen-Diffusionsprofil wird dann korrekt durch die Lösung der eindimensionalen Diffusionsgleichung beschrieben. Abschließend wird die Bildung makroskopischer Ringstrukturen freier und gebundener Exzitonen in Volumen-GaAs um einen fokussierten Laserspot demonstriert. Beide Ringstrukturen resultieren aus lokalen Überheizungen des Exzitonensystems, die durch nichtresonante optische Anregung hervorgerufen werden. Zum quantitativen Verständnis des zugrunde liegenden Mechanismus für die Entstehung der beobachteten Ringstrukturen wird der Temperaturgradient im Exzitonensystem durch eine ortsaufgelöste Linienformanalyse der zweiten LO-Phonon Replik bestimmt. Es wird gezeigt, dass die Ringstrukturen freier Exzitonen auf natürliche Weise durch das lokale thermodynamische Saha-Gleichgewicht zwischen Exzitonen und ungebundenen Elektron-Loch-Paaren entstehen. Zusammenfassend zeigt die vorliegende Arbeit, dass die quantitative Berücksichtigung von Überheizungseffekten im Exzitonensystem zu einem kohärenten Gesamtbild des Lumineszenzprozesses führt, welches sowohl die zeitaufgelöste Lumineszenzkinetik freier Exzitonen als auch das Auftreten exzitonischer Ringstrukturen unter dem Einfluss räumlicher Ladungsträgerdiffusion erklärt. KW - Exziton KW - Galliumarsenid KW - Photoanregung KW - Dimensional Crossover KW - Photolumineszenzspektroskopie KW - Exciton KW - Diffusion KW - Photoluminescence Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134419 ER - TY - JOUR A1 - He, Tao A1 - Stolte, Matthias A1 - Burschka, Christian A1 - Hansen, Nis Hauke A1 - Musiol, Thomas A1 - Kälblein, Daniel A1 - Pflaum, Jens A1 - Tao, Xutang A1 - Brill, Jochen A1 - Würthner, Frank T1 - Single-crystal field-effect transistors of new Cl\(_{2}\)-NDI polymorph processed by sublimation in air JF - Nature Communications N2 - Physical properties of active materials built up from small molecules are dictated by their molecular packing in the solid state. Here we demonstrate for the first time the growth of n-channel single-crystal field-effect transistors and organic thin-film transistors by sublimation of 2,6-dichloro-naphthalene diimide in air. Under these conditions, a new polymorph with two-dimensional brick-wall packing mode (\(\beta\)-phase) is obtained that is distinguished from the previously reported herringbone packing motif obtained from solution (\(\alpha\)-phase). We are able to fabricate single-crystal field-effect transistors with electron mobilities in air of up to 8.6 cm\(^{2}\)V\(^{-1}\)s\(^{-1}\) (\(\alpha\)-phase) and up to 3.5 cm\(^{2}\)V\(^{-1}\)s\(^{-1}\) (\(\beta\)-phase) on n-octadecyltriethoxysilane-modified substrates. On silicon dioxide, thin-film devices based on \(\beta\)-phase can be manufactured in air giving rise to electron mobilities of 0.37 cm\(^{2}\)V\(^{-1}\)s\(^{-1}\). The simple crystal and thin-film growth procedures by sublimation under ambient conditions avoid elaborate substrate modifications and costly vacuum equipment-based fabrication steps. KW - thin-film transistors KW - carrier transport KW - \(\beta\)-phase KW - organic semiconductors KW - induced phase transition KW - charge transport KW - materials design KW - \(\alpha\)-phase KW - mobility KW - pentacene Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149255 VL - 6 IS - 5954 ER - TY - JOUR T1 - Search for production of WW/WZ resonances decaying to a lepton, neutrino and jets in pp collisions at \(\sqrt {s}\)= 8 TeV with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - A search is presented for narrow diboson resonances decaying to WW or WZ in the final state where one W boson decays leptonically (to an electron or a muon plus a neutrino) and the other W/Z boson decays hadronically. The analysis is performed using an integrated luminosity of 20.3 fb\(^{−1}\) of pp collisions at \(\sqrt {s}\) = 8 TeV collected by the ATLAS detector at the large hadron collider. No evidence for resonant diboson production is observed, and resonance masses below 700 and 1490 GeV are excluded at 95 % confidence level for the spin-2 Randall–Sundrum bulk graviton G\(^{*}\) with coupling constant of 1.0 and the extended gauge model W′ boson respectively. KW - ATLAS detector KW - W boson KW - Z boson KW - proton-proton collision Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150164 VL - 75 IS - 5 ER - TY - JOUR T1 - Measurement of the top-quark mass in the fully hadronic decay channel from ATLAS data at \(\sqrt {s}\)=7TeV JF - European Physical Journal C: Particles and Fields N2 - The mass of the top quark is measured in a data set corresponding to 4.6  fb\(^{-1}\) of proton–proton collisions with centre-of-mass energy \(\sqrt {s}\)=7 TeV collected by the ATLAS detector at the LHC. Events consistent with hadronic decays of top–antitop quark pairs with at least six jets in the final state are selected. The substantial background from multijet production is modelled with data-driven methods that utilise the number of identified b-quark jets and the transverse momentum of the sixth leading jet, which have minimal correlation. The top-quark mass is obtained from template fits to the ratio of three-jet to dijet mass. The three-jet mass is calculated from the three jets produced in a top-quark decay. Using these three jets the dijet mass is obtained from the two jets produced in the W boson decay. The top-quark mass obtained from this fit is thus less sensitive to the uncertainty in the energy measurement of the jets. A binned likelihood fit yields a top-quark mass of m\(_{t}\)= 175.1 ± 1.4 (stat.) ± 1.2 (syst.) GeV. KW - ATLAS KW - proton–proton collisions KW - top-quark mass KW - fully hadronic KW - LHC Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149905 VL - 75 IS - 4 ER - TY - JOUR A1 - Lee, Eun-Hye A1 - Song, Jin-Dong A1 - Han, Il-Ki A1 - Chang, Soo-Kyung A1 - Langer, Fabian A1 - Höfling, Sven A1 - Forchel, Alfred A1 - Kamp, Martin A1 - Kim, Jong-Su T1 - Structural and optical properties of position-retrievable low-density GaAs droplet epitaxial quantum dots for application to single photon sources with plasmonic optical coupling JF - Nanoscale Research Letters N2 - The position of a single GaAs quantum dot (QD), which is optically active, grown by low-density droplet epitaxy (DE) (approximately 4 QDs/μm\(^{2}\)), was directly observed on the surface of a 45-nm-thick Al\(_{0.3}\)Ga\(_{0.7}\)As capping layer. The thin thickness of AlGaAs capping layer is useful for single photon sources with plasmonic optical coupling. A micro-photoluminescence for GaAs DE QDs has shown exciton/biexciton behavior in the range of 1.654 to 1.657 eV. The direct observation of positions of low-density GaAs DE QDs would be advantageous for mass fabrication of devices that use a single QD, such as single photon sources. KW - quantum dot KW - droplet epitaxy KW - micro-photoluminescence KW - single photon KW - GaAs Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-143692 VL - 10 IS - 114 ER - TY - JOUR T1 - Measurements of the W production cross sections in association with jets with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - This paper presents cross sections for the production of a W boson in association with jets, measured in proton–proton collisions at \(\sqrt {s}\) = 7 TeV with the ATLAS experiment at the large hadron collider. With an integrated luminosity of 4.6 fb\(^{−1}\), this data set allows for an exploration of a large kinematic range, including jet production up to a transverse momentum of 1 TeV and multiplicities up to seven associated jets. The production cross sections for W bosons are measured in both the electron and muon decay channels. Differential cross sections for many observables are also presented including measurements of the jet observables such as the rapidities and the transverse momenta as well as measurements of event observables such as the scalar sums of the transverse momenta of the jets. The measurements are compared to numerous QCD predictions including next-to-leading-order perturbative calculations, resummation calculations and Monte Carlo generators. KW - ATLAS detector KW - W boson KW - proton-prton-collision Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149925 VL - 75 IS - 2 ER - TY - JOUR T1 - Constraints on the off-shell Higgs boson signal strength in the high-mass ZZ and WW final states with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - Measurements of the ZZ and WW final states in the mass range above the 2m\(_Z\) and 2m\(_W\) thresholds provide a unique opportunity to measure the off-shell coupling strength of the Higgs boson. This paper presents constraints on the off-shell Higgs boson event yields normalised to the Standard Model prediction (signal strength) in the ZZ→4ℓ, ZZ→2ℓ2ν and WW→eνμν final states. The result is based on pp collision data collected by the ATLAS experiment at the LHC, corresponding to an integrated luminosity of 20.3 fb\(^{-1}\) at a collision energy of \(\sqrt {s}\)=8 TeV. Using the CL\(_S\) method, the observed 95 % confidence level (CL) upper limit on the off-shell signal strength is in the range 5.1–8.6, with an expected range of 6.7–11.0. In each case the range is determined by varying the unknown gg→ZZ and gg→WW background K-factor from higher-order quantum chromodynamics corrections between half and twice the value of the known signal K-factor. Assuming the relevant Higgs boson couplings are independent of the energy scale of the Higgs boson production, a combination with the on-shell measurements yields an observed (expected) 95 % CL upper limit on Γ\(_H\)/Γ\(^{SM}_{H}\) in the range 4.5–7.5 (6.5–11.2) using the same variations of the background K-factor. Assuming that the unknown gg→VV background K-factor is equal to the signal K-factor, this translates into an observed (expected) 95 % CL upper limit on the Higgs boson total width of 22.7 (33.0) MeV. KW - Higgs boson KW - coupling strength Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149615 VL - 75 IS - 7 ER - TY - JOUR T1 - Measurement of transverse energy–energy correlations in multi-jet events in pp collisions at \(\sqrt {s}\)=7 TeV using the ATLAS detector and determination of the strong coupling constant αs(m\(_{Z}\)) JF - Physics Letters B N2 - High transverse momentum jets produced in pp collisions at a centre of mass energy of 7 TeV are used to measure the transverse energy–energy correlation function and its associated azimuthal asymmetry. The data were recorded with the ATLAS detector at the LHC in the year 2011 and correspond to an integrated luminosity of 158 pb\(^{-1}\). The selection criteria demand the average transverse momentum of the two leading jets in an event to be larger than 250 GeV. The data at detector level are well described by Monte Carlo event generators. They are unfolded to the particle level and compared with theoretical calculations at next-to-leading-order accuracy. The agreement between data and theory is good and provides a precision test of perturbative Quantum Chromodynamics at large momentum transfers. From this comparison, the strong coupling constant given at the Z   boson mass is determined to be αs(m\(_{Z}\))=0.1173±0.0010 (exp.) \(^{+0.0065}_{−0.0026}\) (theo.). KW - physics KW - high transverse momentum jets KW - transverse energy–energy correlation function Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-143398 VL - 750 ER - TY - JOUR T1 - Measurement of three-jet production cross-sections in pp collisions at 7 TeV centre-of-mass energy using the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - Double-differential three-jet production cross-sections are measured in proton–proton collisions at a centre-of-mass energy of \(\sqrt {s}\) = 7 TeV using the ATLAS detector at the large hadron collider. The measurements are presented as a function of the three-jet mass (m\(_{jjj}\)), in bins of the sum of the absolute rapidity separations between the three leading jets (|Y\(^{*}\)|). Invariant masses extending up to 5 TeV are reached for 8 < |Y\(^{*}\)| < 10. These measurements use a sample of data recorded using the ATLAS detector in 2011, which corresponds to an integrated luminosity of 4.51 fb\(^{-1}\). Jets are identified using the anti-k\(_{t}\) algorithm with two different jet radius parameters, R = 0.4 and R = 0.6. The dominant uncertainty in these measurements comes from the jet energy scale. Next-to-leading-order QCD calculations corrected to account for non-perturbative effects are compared to the measurements. Good agreement is found between the data and the theoretical predictions based on most of the available sets of parton distribution functions, over the full kinematic range, covering almost seven orders of magnitude in the measured cross-section values. KW - proton-proton-collisions KW - ATLAS detector Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149918 VL - 75 IS - 5 ER - TY - JOUR T1 - Measurement of the top quark mass in the t\(\overline{t}\)→ lepton+jets and t\(\overline{t}\)→ dilepton channels using \(\sqrt {s}\)=7 TeV ATLAS data JF - European Physical Journal C: Particles and Fields N2 - The top quark mass was measured in the channels t\(\overline{t}\) → lepton+jets and t\(\overline{t}\) → dilepton (lepton = e,μ) based on ATLAS data recorded in 2011. The data were taken at the LHC with a proton–proton centre-of-mass energy of \(\sqrt {s}\) = 7 TeV and correspond to an integrated luminosity of 4.6 fb\(^{-1}\). The t\(\overline{t}\) → lepton+jets analysis uses a three-dimensional template technique which determines the top quark mass together with a global jet energy scale factor (JSF), and a relative b-to-light-jet energy scale factor(bJSF), where the terms b-jets and light-jets refer to jets originating from b-quarks and u, d, c, s-quarks or gluons, respectively. The analysis of the t\(\overline{t}\) → dilepton channel exploits a one-dimensional template method using the m\(_{lb}\) observable, defined as the average invariant mass of the two lepton+b-jet pairs in each event. The top quark mass is measured to be 172.33±0.75(stat + JSF + bJSF)±1.02(syst) GeV, and 173.79 ± 0.54(stat) ± 1.30(syst) GeV in the t\(\overline{t}\) → lepton+jets and t\(\overline{t}\) → dilepton channels, respectively. The combination of the two results yields m\(_{top}\) =172.99 ± 0.48(stat) ± 0.78(syst) GeV, with a total uncertainty of 0.91 GeV. KW - top quark mass Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149890 VL - 75 IS - 7 ER - TY - JOUR T1 - Search for supersymmetry in events containing a same-flavour opposite-sign dilepton pair, jets, and large missing transverse momentum in \(\sqrt {s}\) = 8 TeV pp collisions with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - Two searches for supersymmetric particles in final states containing a same-flavour opposite-sign lepton pair, jets and large missing transverse momentum are presented. The proton–proton collision data used in these searches were collected at a centre-of-mass energy \(\sqrt {s}\) = 8 TeV by the ATLAS detector at the Large Hadron Collider and corresponds to an integrated luminosity of 20.3 fb\(^{−1}\). Two leptonic production mechanisms are considered: decays of squarks and gluinos with Z bosons in the final state, resulting in a peak in the dilepton invariant mass distribution around the Z-boson mass; and decays of neutralinos (e.g. \(\tilde{χ}\)\(^{0}_{2}\) → ℓ\(^{+}\)ℓ\(^{−}\)\(\tilde{χ}\)\(^{0}_{1}\)), resulting in a kinematic endpoint in the dilepton invariant mass distribution. For the former, an excess of events above the expected Standard Model background is observed, with a significance of three standard deviations. In the latter case, the data are well-described by the expected Standard Model background. The results from each channel are interpreted in the context of several supersymmetric models involving the production of squarks and gluinos. KW - ATLAS detector KW - supersymmetry KW - proton-proton collision Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150184 VL - 75 IS - 7 ER - TY - JOUR T1 - Two-particle Bose-Einstein correlations in pp collisions at \(\sqrt {s}\) = 0.9 and 7 TeV measured with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - The paper presents studies of Bose–Einstein Correlations (BEC) for pairs of like-sign charged particles measured in the kinematic range p\(_{T}\) > 100 MeV and |η| <  2.5 in proton collisions at centre-of-mass energies of 0.9 and 7 TeV with the ATLAS detector at the CERN Large Hadron Collider. The integrated luminosities are approximately 7 μb\(^{−1}\), 190 μb\(^{−1}\) and 12.4 nb\(^{−1}\) for 0.9 TeV, 7 TeV minimum-bias and 7 TeV high-multiplicity data samples, respectively. The multiplicity dependence of the BEC parameters characterizing the correlation strength and the correlation source size are investigated for charged-particle multiplicities of up to 240. A saturation effect in the multiplicity dependence of the correlation source size parameter is observed using the high-multiplicity 7 TeV data sample. The dependence of the BEC parameters on the average transverse momentum of the particle pair is also investigated. KW - ATLAS detector KW - proton-proton collision KW - Bose-Einstein Correlations Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150222 VL - 75 IS - 10 ER - TY - JOUR T1 - Search for a new resonance decaying to a W or Z boson and a Higgs boson in the ℓℓ/ℓν/νν+b\(\overline{b}\) final states with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - A search for a new resonance decaying to a W or Z boson and a Higgs boson in the ℓℓ/ℓν/νν+b\(\overline{b}\) final states is performed using 20.3 fb\(^{−1}\) of pp collision data recorded at \(\sqrt {s}\) = 8 TeV with the ATLAS detector at the Large Hadron Collider. The search is conducted by examining the WH / ZH invariant mass distribution for a localized excess. No significant deviation from the Standard Model background prediction is observed. The results are interpreted in terms of constraints on the Minimal Walking Technicolor model and on a simplified approach based on a phenomenological Lagrangian of Heavy Vector Triplets. KW - Higgs boson KW - W boson KW - Z boson KW - ATLAS detector Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150075 VL - 75 IS - 6 ER - TY - JOUR T1 - Measurement of the branching ratio Γ(Λ\(^0_b\)→ψ(2S)Λ\(^0\))/Γ(Λ\(^0_b\)→J/ψΛ\(^0\)) with the ATLAS detector JF - Physics Letters B N2 - An observation of the View the Λ\(^0_b\)→ψ(2S)Λ\(^0\) decay and a comparison of its branching fraction with that of the Λ\(^0_b\)→J/ψΛ\(^0\) decay has been made with the ATLAS detector in proton–proton collisions at \(\sqrt {s}\)=8 TeV at the LHC using an integrated luminosity of 20.6 fb\(^{-1}\). The J/ψJ/ψ and ψ(2S) mesons are reconstructed in their decays to a muon pair, while the Λ\(^0\)→pπ\(^-\) decay is exploited for the Λ\(^0\) baryon reconstruction. The Λ\(^0_b\) baryons are reconstructed with transverse momentum p\(_T\)>10 GeV pT>10 GeV and pseudorapidity |η|<2.1. The measured branching ratio of the Λ\(^0_b\)→ψ(2S)Λ\(^0\) and Λ\(^0_b\)→J/ψΛ\(^0\) decays is Γ(Λ\(^0_b\)→ψ(2S)Λ\(^0\))/Γ(Λ\(^0_b\)→J/ψΛ\(^0\))=0.501±0.033(stat)±0.019(syst), lower than the expectation from the covariant quark model. KW - physics KW - proton–proton collisions KW - Large Hadron Collider KW - decay Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-143375 VL - 751 ER - TY - JOUR T1 - Search for the associated production of the Higgs boson with a top quark pair in multilepton final states with the ATLAS detector JF - Physics Letters B N2 - A search for the associated production of the Higgs boson with a top quark pair is performed in multilepton final states using 20.3 fb\(^{−1}\) of proton–proton collision data recorded by the ATLAS experiment at \(\sqrt {s}\)=8 TeV at the Large Hadron Collider. Five final states, targeting the decays H→WW\(^{*}\), ττ, and ZZ\(^{*}\), are examined for the presence of the Standard Model (SM) Higgs boson: two same-charge light leptons (e or μ) without a hadronically decaying τ lepton; three light leptons; two same-charge light leptons with a hadronically decaying τ lepton; four light leptons; and one light lepton and two hadronically decaying τ leptons. No significant excess of events is observed above the background expectation. The best fit for the t\(\overline{t}\)H production cross section, assuming a Higgs boson mass of 125 GeV, is 2.1\(^{+1.4}_{-1.2}\) times the SM expectation, and the observed (expected) upper limit at the 95% confidence level is 4.7 (2.4) times the SM rate. The p-value for compatibility with the background-only hypothesis is 1.8σ; the expectation in the presence of a Standard Model signal is 0.9σ. KW - physics KW - associated production KW - Higgs boson Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-144231 VL - 749 ER - TY - JOUR T1 - Measurement of exclusive γγ→ℓ\(^{+}\)ℓ\(^{−}\) production in proton–proton collisions at \(\sqrt {s}\)=7 TeV with the ATLAS detector JF - Physics Letters B N2 - This Letter reports a measurement of the exclusive γγ→ℓ\(^{+}\)ℓ\(^{−}\) (ℓ=e, μℓ=e, μ) cross-section in proton–proton collisions at a centre-of-mass energy of 7 TeV by the ATLAS experiment at the LHC, based on an integrated luminosity of 4.6 fb\(^{−1}\). For the electron or muon pairs satisfying exclusive selection criteria, a fit to the dilepton acoplanarity distribution is used to extract the fiducial cross-sections. The cross-section in the electron channel is determined to be \(^{excl.}_{γγ→e^{+}e^{-}}\)=0.428 ± 0.035 (stat.) ± 0.018 (syst.) pb for a phase–space region with invariant mass of the electron pairs greater than 24 GeV, in which both electrons have transverse momentum p\(_{T}\)>12 GeV and pseudorapidity |η|<2.4. For muon pairs with invariant mass greater than 20 GeV, muon transverse momentum p\(_{T}\)>10 GeV and pseudorapidity |η|<2.4, the cross-section is determined to be \(^{excl.}_{γγ→μ^{+}μ^{-}}\) =0.628 ± 0.032 (stat.) ± 0.021 (syst.) pb. When proton absorptive effects due to the finite size of the proton are taken into account in the theory calculation, the measured cross-sections are found to be consistent with the theory prediction. KW - physics Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-144247 VL - 749 ER - TY - JOUR T1 - Measurement of colour flow with the jet pull angle in t\(\overline{t}\) events using the ATLAS detector at \(\sqrt {s}\)=8 TeV JF - Physics Letters B N2 - The distribution and orientation of energy inside jets is predicted to be an experimental handle on colour connections between the hard-scatter quarks and gluons initiating the jets. This Letter presents a measurement of the distribution of one such variable, the jet pull angle. The pull angle is measured for jets produced in t\(\overline{t}\) events with one W boson decaying leptonically and the other decaying to jets using 20.3 fb\(^{−1}\) of data recorded with the ATLAS detector at a centre-of-mass energy of \(\sqrt {s}\)=8 TeV at the LHC. The jet pull angle distribution is corrected for detector resolution and acceptance effects and is compared to various models. KW - physics KW - colour flow Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-144229 VL - 750 ER - TY - JOUR A1 - Lee, Chang-Min A1 - Lim, Hee-Jin A1 - Schneider, Christian A1 - Maier, Sebastian A1 - Höfling, Sven A1 - Kamp, Martin A1 - Lee, Yong-Hee T1 - Efficient single photon source based on \(\mu\)-fibre-coupled tunable microcavity JF - Scientific Reports N2 - Efficient and fast on-demand single photon sources have been sought after as critical components of quantum information science. We report an efficient and tunable single photon source based on an InAs quantum dot (QD) embedded in a photonic crystal cavity coupled with a highly curved \(\mu\)-fibre. Exploiting evanescent coupling between the \(\mu\)-fibre and the cavity, a high collection efficiency of 23% and Purcell-enhanced spontaneous emissions are observed. In our scheme, the spectral position of a resonance can be tuned by as much as 1.5 nm by adjusting the contact position of the \(\mu\)-fibre, which increases the spectral coupling probability between the QD and the cavity mode. Taking advantage of the high photon count rate and the tunability, the collection efficiencies and the decay rates are systematically investigated as a function of the QD-cavity detuning. KW - tapers KW - semiconductor quantum dots KW - crystal KW - nanowire KW - generation KW - nanoactivity KW - mode KW - emission Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-145835 VL - 5 IS - 14309 ER - TY - JOUR A1 - Jobst, Bertram J. A1 - Wielpütz, Mark O. A1 - Triphan, Simon M.F. A1 - Anjorin, Angela A1 - Ley-Zaporozhan, Julia A1 - Kauczor, Hans-Ulrich A1 - Biederer, Jürgen A1 - Ley, Sebastian A1 - Sedlaczek, Oliver T1 - Morpho-Functional 1H-MRI of the Lung in COPD: Short-Term Test-Retest Reliability JF - PLOS ONE N2 - Purpose Non-invasive end-points for interventional trials and tailored treatment regimes in chronic obstructive pulmonary disease (COPD) for monitoring regionally different manifestations of lung disease instead of global assessment of lung function with spirometry would be valuable. Proton nuclear magnetic resonance imaging (1H-MRI) allows for a radiation-free assessment of regional structure and function. The aim of this study was to evaluate the short-term reproducibility of a comprehensive morpho-functional lungMRI protocol in COPD. Materials and Methods 20 prospectively enrolled COPD patients (GOLD I-IV) underwent 1H-MRI of the lung at 1.5T on two consecutive days, including sequences for morphology, 4D contrast-enhanced perfusion, and respiratory mechanics. Image quality and COPD-related morphological and functional changes were evaluated in consensus by three chest radiologists using a dedicated MRI-based visual scoring system. Test-retest reliability was calculated per each individual lung lobe for the extent of large airway (bronchiectasis, wall thickening, mucus plugging) and small airway abnormalities (tree in bud, peripheral bronchiectasis, mucus plugging), consolidations, nodules, parenchymal defects and perfusion defects. The presence of tracheal narrowing, dystelectasis, pleural effusion, pulmonary trunk ectasia, right ventricular enlargement and, finally, motion patterns of diaphragma and chest wall were addressed. Results Median global scores [10(Q1:8.00; Q3:16.00) vs. 11(Q1:6.00; Q3:15.00)] as well as category subscores were similar between both timepoints, and kappa statistics indicated "almost perfect" global agreement (\(\kappa\)= 0.86, 95%CI = 0.81-0.91). Most subscores showed at least "substantial" agreement of MRI1 and MRI2 (\(\kappa\)= 0.64-1.00), whereas the agreement for the diagnosis of dystelectasis/effusion (\(\kappa\)= 0.42, 95%CI = 0.00-0.93) was "moderate" and of tracheal abnormalities (\(\kappa\)= 0.21, 95%CI = 0.00-0.75) "fair". Most MRI acquisitions showed at least diagnostic quality at MRI1 (276 of 278) and MRI2 (259 of 264). Conclusion Morpho-functional 1H-MRI can be obtained with reproducible image quality and high short-term test-retest reliability for COPD-related morphological and functional changes of the lung. This underlines its potential value for the monitoring of regional lung characteristics in COPD trials. KW - capability KW - obstructive pulmonary disease KW - quantitative computed tomography KW - cystic fibrosis KW - proton MRI KW - perfusion KW - emphysema KW - CT KW - agreement KW - dysfunction Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151365 VL - 10 IS - 9 ER - TY - JOUR T1 - Jet energy measurement and its systematic uncertainty in proton-proton collisions at \(\sqrt {s}\)=7 TeV with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - The jet energy scale (JES) and its systematic uncertainty are determined for jets measured with the ATLAS detector using proton–proton collision data with a centre-of-mass energy of \(\sqrt {s}\)=7 TeV corresponding to an integrated luminosity of 4.7 fb\(^{-1}\). Jets are reconstructed from energy deposits forming topological clusters of calorimeter cells using the anti-k\(_t\) algorithm with distance parameters R=0.4 or R=0.6, and are calibrated using MC simulations. A residual JES correction is applied to account for differences between data and MC simulations. This correction and its systematic uncertainty are estimated using a combination of in situ techniques exploiting the transverse momentum balance between a jet and a reference object such as a photon or a Z boson, for 20≤p\(^{jet}_{T}\)<1000 GeV and pseudorapidities |η|<4.5. The effect of multiple proton–proton interactions is corrected for, and an uncertainty is evaluated using in situ techniques. The smallest JES uncertainty of less than 1 % is found in the central calorimeter region (|η|<1.2) for jets with 55≤p\(^{jet}_{T}\)<500 GeV. For central jets at lower p\(_{T}\), the uncertainty is about 3 %. A consistent JES estimate is found using measurements of the calorimeter response of single hadrons in proton–proton collisions and test-beam data, which also provide the estimate for p\(^{jet}_{T}\)>1 TeV. The calibration of forward jets is derived from dijet p\(_{T}\) balance measurements. The resulting uncertainty reaches its largest value of 6 % for low-p\(_{T}\) jets at |η|=4.5. Additional JES uncertainties due to specific event topologies, such as close-by jets or selections of event samples with an enhanced content of jets originating from light quarks or gluons, are also discussed. The magnitude of these uncertainties depends on the event sample used in a given physics analysis, but typically amounts to 0.5–3 %. KW - jet energy scale KW - proton-proton-collision Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149854 VL - 75 IS - 1 ER - TY - JOUR T1 - Search for direct pair production of a chargino and a neutralino decaying to the 125 GeV Higgs boson in \(\sqrt {s}\) = 8 TeV pp collisions with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - A search is presented for the direct pair production of a chargino and a neutralino pp → \(\tilde{χ}\)\(^{±}_{1}\)\(\tilde{χ}\)\(^{0}_{2}\), where the chargino decays to the lightest neutralino and the W boson, \(\tilde{χ}\)\(^{±}_{1}\)→\(\tilde{χ}\)\(^{0}_{1}\)(W\(^{±}\)→ℓ\(^{±}\)ν), while the neutralino decays to the lightest neutralino and the 125 GeV Higgs boson, \(\tilde{χ}\)\(^{0}_{2}\)→\(\tilde{χ}\)\(^{0}_{1}\)(h→bb/γγ/ℓ\(^{±}\)νqq). The final states considered for the search have large missing transverse momentum, an isolated electron or muon, and one of the following: either two jets identified as originating from bottom quarks, or two photons, or a second electron or muon with the same electric charge. The analysis is based on 20.3 fb\(^{-1}\) of \(\sqrt {s}\) = 8 TeV proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with the Standard Model expectations, and limits are set in the context of a simplified supersymmetric model. KW - neutralino KW - chargino KW - proton-proton collision KW - Higgs boson KW - ATLAS detector Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150099 VL - 75 IS - 5 ER - TY - JOUR T1 - Search for the Standard Model Higgs boson produced in association with top quarks and decaying into b\(\overline{b}\) in pp collisions at \(\sqrt {s}\) = 8 TeV with the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - A search for the Standard Model Higgs boson produced in association with a top-quark pair, t\(\overline{t}\)H, is presented. The analysis uses 20.3 fb\(^{−1}\) of pp collision data at \(\sqrt {s}\) = 8 TeV, collected with the ATLAS detector at the Large Hadron Collider during 2012. The search is designed for the H→b\(\overline{b}\) decay mode and uses events containing one or two electrons or muons. In order to improve the sensitivity of the search, events are categorised according to their jet and b-tagged jet multiplicities. A neural network is used to discriminate between signal and background events, the latter being dominated by t\(\overline{t}\)+jets production. In the single-lepton channel, variables calculated using a matrix element method are included as inputs to the neural network to improve discrimination of the irreducible t\(\overline{t}\)+b\(\overline{b}\) background. No significant excess of events above the background expectation is found and an observed (expected) limit of 3.4 (2.2) times the Standard Model cross section is obtained at 95 % confidence level. The ratio of the measured t\(\overline{t}\)H signal cross section to the Standard Model expectation is found to be μ = 1.5 ± 1.1 assuming a Higgs boson mass of 125 GeV. KW - Higgs boson KW - ATLAS detector KW - top quarks KW - proton-proton collision Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150197 VL - 75 IS - 7 ER - TY - JOUR T1 - Identification and energy calibration of hadronically decaying tau leptons with the ATLAS experiment in pp collisions at \(\sqrt {s}\)=8 TeV JF - European Physical Journal C: Particles and Fields N2 - This paper describes the trigger and offline reconstruction, identification and energy calibration algorithms for hadronic decays of tau leptons employed for the data collected from pp collisions in 2012 with the ATLAS detector at the LHC center-of-mass energy \(\sqrt {s}\)=8 TeV. The performance of these algorithms is measured in most cases with Z decays to tau leptons using the full 2012 dataset, corresponding to an integrated luminosity of 20.3 fb\(^{-1}\). An uncertainty on the offline reconstructed tau energy scale of 2–4 %, depending on transverse energy and pseudorapidity, is achieved using two independent methods. The offline tau identification efficiency is measured with a precision of 2.5 % for hadronically decaying tau leptons with one associated track, and of 4 % for the case of three associated tracks, inclusive in pseudorapidity and for a visible transverse energy greater than 20 GeV. For hadronic tau lepton decays selected by offline algorithms, the tau trigger identification efficiency is measured with a precision of 2–8 %, depending on the transverse energy. The performance of the tau algorithms, both offline and at the trigger level, is found to be stable with respect to the number of concurrent proton–proton interactions and has supported a variety of physics results using hadronically decaying tau leptons at ATLAS. KW - tau leptons KW - hadronic decays Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149829 VL - 75 IS - 7 ER - TY - JOUR T1 - Search for heavy long-lived multi-charged particles in pp collisions at \(\sqrt {s}\) = 8 TeV using the ATLAS detector JF - European Physical Journal C: Particles and Fields N2 - A search for heavy long-lived multi-charged particles is performed using the ATLAS detector at the LHC. Data collected in 2012 at \(\sqrt {s}\) = 8 TeV from pp collisions corresponding to an integrated luminosity of 20.3 fb\(^{−1}\) are examined. Particles producing anomalously high ionisation, consistent with long-lived massive particles with electric charges from |q| = 2e to |q| = 6e are searched for. No signal candidate events are observed, and 95 % confidence level cross-section upper limits are interpreted as lower mass limits for a Drell–Yan production model. The mass limits range between 660 and 785 GeV. KW - ATLAS detector KW - proton-proton collision Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150100 VL - 75 IS - 8 ER - TY - JOUR A1 - Fuchs, F. A1 - Stender, B. A1 - Trupke, M. A1 - Simin, D. A1 - Pflaum, J. A1 - Dyakonov, V. A1 - Astakhov, G.V. T1 - Engineering near-infrared single-photon emitters with optically active spins in ultrapure silicon carbide JF - Nature Communications N2 - Vacancy-related centres in silicon carbide are attracting growing attention because of their appealing optical and spin properties. These atomic-scale defects can be created using electron or neutron irradiation; however, their precise engineering has not been demonstrated yet. Here, silicon vacancies are generated in a nuclear reactor and their density is controlled over eight orders of magnitude within an accuracy down to a single vacancy level. An isolated silicon vacancy serves as a near-infrared photostable single-photon emitter, operating even at room temperature. The vacancy spins can be manipulated using an optically detected magnetic resonance technique, and we determine the transition rates and absorption cross-section, describing the intensity-dependent photophysics of these emitters. The on-demand engineering of optically active spins in technologically friendly materials is a crucial step toward implementation of both maser amplifiers, requiring high-density spin ensembles, and qubits based on single spins. KW - nuclear magnetic resonance KW - coherent control KW - 4H KW - phosphorus KW - qubits KW - defects KW - entanglement KW - room temperature KW - vacancy Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148502 VL - 6 IS - 7578 ER - TY - JOUR A1 - Ziener, Christian H. A1 - Kurz, Felix T. A1 - Buschle, Lukas R. A1 - Kampf, Thomas T1 - Orthogonality, Lommel integrals and cross product zeros of linear combinations of Bessel functions JF - SpringerPlus N2 - The cylindrical Bessel differential equation and the spherical Bessel differential equation in the interval R\(\leq\)r\(\leq\)\(\gamma\)R with Neumann boundary conditions are considered. The eigenfunctions are linear combinations of the Bessel function \(\Phi\)\(_{n,ν}\)(r) = Y'\(_{ν}\) (\(\lambda\)\(_{n,ν}\))J\(_{ν}\)(\(\lambda\)\(_{n,ν}\) r/R) - J'\(_{ν}\)(\(\lambda\)\(_{n,ν}\))Y\(_{ν}\)(\(\lambda\)\(_{n,ν}\)r/R) or linear combinations of the spherical Bessel functions \(\psi\)\(_{m,ν}\)(r) = y'\(_{ν}\)(\(\lambda\)\(_{m,ν}\))j\(_{ν}\)(\(\lambda\)\(_{m,ν}\)r/R) - j'\(_{ν}\)(\(\lambda\)\(_{m,ν}\))y\(_{ν}\)(\(\lambda\)\(_{m,ν}\)r/R). The orthogonality relations with analytical expressions for the normalization constant are given. Explicit expressions for the Lommel integrals in terms of Lommel functions are derived. The cross product zeros Y'\(_{ν}\)\(\lambda\)\(_{n,ν}\))J'\(_{ν}\)(\(\gamma\)\(\lambda\)\(_{n,ν}\))- J'\(_{ν}\)(\(\lambda\)\(_{n,ν}\))Y'\(_{ν}\)(\(\gamma\)\(\lambda\)\(_{n,ν}\)) = 0 and y'\(_{ν}\)(\(\lambda\)\(_{m,ν}\))j'\(_{ν}\)(\(\gamma\)\(\lambda\)\(_{m,ν}\)) - j'\(_{ν}\)(\(\lambda\)\(_{m,ν}\))y'\(_{ν}\)(\(\gamma\)\(\lambda\)\(_{m,ν}\)) = 0 are considered in the complex plane for real as well as complex values of the index ν and approximations for the exceptional zero \(\lambda\)\(_{1,ν}\) are obtained. A numerical scheme based on the discretization of the twodimensional and three-dimensional Laplace operator with Neumann boundary conditions is presented. Explicit representations of the radial part of the Laplace operator in form of a tridiagonal matrix allow the simple computation of the cross product zeros. KW - magnetic field relaxation KW - time inhomogeneities KW - model Bessel function KW - linear combination KW - integral Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151432 VL - 4 IS - 390 ER - TY - JOUR T1 - Search for a CP-odd Higgs boson decaying to Zh in pp collisions at \(\sqrt{s}\)=8 TeV with the ATLAS detector JF - Physics Letters B N2 - A search for a heavy, CP-odd Higgs boson, A, decaying into a Z boson and a 125 GeV Higgs boson, h, with the ATLAS detector at the LHC is presented. The search uses proton–proton collision data at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 20.3 fb\(^{-1}\). Decays of CP-even h bosons to ττ or bb pairs with the Z boson decaying to electron or muon pairs are considered, as well as h→bb decays with the Z boson decaying to neutrinos. No evidence for the production of an A boson in these channels is found and the 95% confidence level upper limits derived for σ(gg→A)×BR(A→Zh)×BR(h→f\(\bar{f}\)) are 0.098–0.013 pb for f=τ and 0.57–0.014 pb for f=b in a range of m\(_{A}\)=220–1000 GeVmA=220–1000 GeV. The results are combined and interpreted in the context of two-Higgs-doublet models. KW - BSM Higgs boson KW - ATLAS Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-143050 VL - 744 ER - TY - JOUR A1 - Ma, Eric Yue A1 - Calvo, M. Reyes A1 - Wang, Jing A1 - Lian, Biao A1 - Mühlbauer, Mathias A1 - Brüne, Christoph A1 - Cui, Yong-Tao A1 - Lai, Keji A1 - Kundhikanjana, Worasom A1 - Yang, Yongliang A1 - Baenninger, Matthias A1 - König, Markus A1 - Ames, Christopher A1 - Buhmann, Hartmut A1 - Leubner, Philipp A1 - Molenkamp, Laurens W. A1 - Zhang, Shou-Cheng A1 - Goldhaber-Gordon, David A1 - Kelly, Michael A. A1 - Shen, Zhi-Xun T1 - Unexpected edge conduction in mercury telluride quantum wells under broken time-reversal symmetry JF - Nature Communications N2 - The realization of quantum spin Hall effect in HgTe quantum wells is considered a milestone in the discovery of topological insulators. Quantum spin Hall states are predicted to allow current flow at the edges of an insulating bulk, as demonstrated in various experiments. A key prediction yet to be experimentally verified is the breakdown of the edge conduction under broken time-reversal symmetry. Here we first establish a systematic framework for the magnetic field dependence of electrostatically gated quantum spin Hall devices. We then study edge conduction of an inverted quantum well device under broken time-reversal symmetry using microwave impedance microscopy, and compare our findings to a noninverted device. At zero magnetic field, only the inverted device shows clear edge conduction in its local conductivity profile, consistent with theory. Surprisingly, the edge conduction persists up to 9 T with little change. This indicates physics beyond simple quantum spin Hall model, including material-specific properties and possibly many-body effects. KW - topological insulators KW - surface states KW - HgTe KW - Hg1-xCdxTe KW - vacancies Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-143185 VL - 6 IS - 7252 ER - TY - JOUR A1 - Charnukha, A. A1 - Thirupathaiah, S. A1 - Zabolotnyy, V. B. A1 - Büchner, B. A1 - Zhigadlo, N. D. A1 - Batlogg, B. A1 - Yaresko, A. N. A1 - Borisenko, S. V. T1 - Interaction-induced singular Fermi surface in a high-temperature oxypnictide superconductor JF - Scientific Reports N2 - In the family of iron-based superconductors, LaFeAsO-type materials possess the simplest electronic structure due to their pronounced two-dimensionality. And yet they host superconductivity with the highest transition temperature T\(_{c}\)\(\approx\)55K. Early theoretical predictions of their electronic structure revealed multiple large circular portions of the Fermi surface with a very good geometrical overlap (nesting), believed to enhance the pairing interaction and thus superconductivity. The prevalence of such large circular features in the Fermi surface has since been associated with many other iron-based compounds and has grown to be generally accepted in the field. In this work we show that a prototypical compound of the 1111-type, SmFe\(_{0.92}\)Co\(_{0.08}\)AsO, is at odds with this description and possesses a distinctly different Fermi surface, which consists of two singular constructs formed by the edges of several bands, pulled to the Fermi level from the depths of the theoretically predicted band structure by strong electronic interactions. Such singularities dramatically affect the low-energy electronic properties of the material, including superconductivity. We further argue that occurrence of these singularities correlates with the maximum superconducting transition temperature attainable in each material class over the entire family of iron-based superconductors. KW - electronic structure KW - photoemission spectroscopy KW - iron pnictides KW - chalcogenides KW - ARPES Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151987 VL - 5 IS - 10392 ER - TY - JOUR A1 - Czerniuk, T. A1 - Brüggemann, C. A1 - Tepper, J. A1 - Brodbeck, S. A1 - Schneider, C. A1 - Kamp, M. A1 - Höfling, S. A1 - Glavin, B. A. A1 - Yakovlev, D. R. A1 - Akimov, A. V. A1 - Bayer, M. T1 - Lasing from active optomechanical resonators JF - Nature Communications N2 - Planar microcavities with distributed Bragg reflectors (DBRs) host, besides confined optical modes, also mechanical resonances due to stop bands in the phonon dispersion relation of the DBRs. These resonances have frequencies in the 10- to 100-GHz range, depending on the resonator's optical wavelength, with quality factors exceeding 1,000. The interaction of photons and phonons in such optomechanical systems can be drastically enhanced, opening a new route towards the manipulation of light. Here we implemented active semiconducting layers into the microcavity to obtain a vertical-cavity surface-emitting laser (VCSEL). Thereby, three resonant excitations--photons, phonons and electrons--can interact strongly with each other providing modulation of the VCSEL laser emission: a picosecond strain pulse injected into the VCSEL excites long-living mechanical resonances therein. As a result, modulation of the lasing intensity at frequencies up to 40 GHz is observed. From these findings, prospective applications of active optomechanical resonators integrated into nanophotonic circuits may emerge. KW - physical sciences KW - applied physics KW - optical physics Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121559 VL - 5 ER - TY - THES A1 - Gerhard, Felicitas Irene Veronika T1 - Controlling structural and magnetic properties of epitaxial NiMnSb for application in spin torque devices T1 - Anpassung der strukturellen und magnetischen Eigenschaften von epitaktischem NiMnSb in Hinsicht auf die Anwendung in Spin Drehmoment Bauteilen N2 - This thesis describes the epitaxial growth of the Half-Heusler alloy NiMnSb by molecular beam epitaxy. Its structural and magnetic properties are controlled by tuning the composition and the resulting small deviation from stoichiometry. The magnetic in-plane anisotropy depends on the Mn concentration of the sample and can be controlled in both strength and orientation. This control of the magnetic anisotropy allows for growing NiMnSb layers of a given thickness and magnetic properties as requested for the design of NiMnSb-based devices. The growth and characterization of NiMnSb-ZnTe-NiMnSb heterostructures is presented - such heterostructures form an all-NiMnSb based spin-valve and are a promising basis for spin torque devices. N2 - Diese Arbeit beschreibt das epitaktische Wachstum der Halb-Heusler Legierung NiMnSb mittels Molekularstrahl Epitaxie. Durch Abstimmen der Zusammensetzung und einer daraus folgenden geringen Abweichung der Stöchiometrie werden die strukturellen und magnetischen Eigenschaften gesteuert. Die magnetische Anisotropie hängt von der Mn Konzentration der Probe ab, wobei sowohl die Stärke als auch die Orientierung der Anisotropie angepasst werden kann. Die Kontrolle der magnetischen Anisotropie erlaubt das Wachstum von NiMnSb Schichten mit gegebener Dicke und magnetischen Eigenschaften, die für das Design von NiMnSb-basierten Bauteilen erforderlich sind. Das Wachstum und die Charakterisierung von NiMnSb-ZnTe-NiMnSb Heterostrukturen wird präsentiert - solche Heterostrukturen bilden ein rein NiMnSb-basiertes Spinventil und sind eine vielversprechende Basis für Spin Drehmoment Bauteile. KW - Nickelverbindungen KW - Manganverbindungen KW - Half Heusler alloy NiMnSb KW - molecular beam epitaxy KW - magnetic anisotropy KW - spin valve KW - spin torque device KW - Halb-Heusler Legierung NiMnSb KW - Molekularstrahl Epitaxie KW - Magnetische Anisotropie KW - Spinventil KW - Spindrehmoment Bauteil KW - Antimonverbindungen KW - Heterostruktur KW - Molekularstrahlepitaxie KW - Heuslersche Legierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-111690 ER - TY - THES A1 - Tran-Gia, Johannes T1 - Model-Based Reconstruction Methods for MR Relaxometry T1 - Modellbasierte Rekonstruktionsmethoden für die MR-Relaxometrie N2 - In this work, a model-based acceleration of parameter mapping (MAP) for the determination of the tissue parameter T1 using magnetic resonance imaging (MRI) is introduced. The iterative reconstruction uses prior knowledge about the relaxation behavior of the longitudinal magnetization after a suitable magnetization preparation to generate a series of fully sampled k-spaces from a strongly undersampled acquisition. A Fourier transform results in a spatially resolved time course of the longitudinal relaxation process, or equivalently, a spatially resolved map of the longitudinal relaxation time T1. In its fastest implementation, the MAP algorithm enables the reconstruction of a T1 map from a radial gradient echo dataset acquired within only a few seconds after magnetization preparation, while the acquisition time of conventional T1 mapping techniques typically lies in the range of a few minutes. After validation of the MAP algorithm for two different types of magnetization preparation (saturation recovery & inversion recovery), the developed algorithm was applied in different areas of preclinical and clinical MRI and possible advantages and disadvantages were evaluated. N2 - Im Rahmen dieser Arbeit wurde ein modellbasiertes Verfahren namens MAP (engl. Model-based Acceleration of Parameter mapping) für die Bestimmung des T1-Gewebeparameters mittels Magnetresonanztomographie (MRT) entwickelt. Dieser iterative Algorithmus verwendet das Vorwissen über den nach einer Magnetisierungspräparation zu erwartenden Signalverlauf, um aus einer im Anschluss an eine initiale Präparation aufgenommene zeitliche Serie stark unterabgetasteter k-Räume eine Serie voll abgetasteter k-Räume zu generieren.Eine Fourier-Transformation dieser Serie in den Bildraum zeigt den örtlich aufgelösten zeitlichen Verlauf der longitudinalen Relaxation, was eine Kartierung des Gewebeparameters T1 ermöglicht. In seiner schnellsten Form ermöglicht dieses Verfahren die Rekonstruktion einer T1-Karte aus einem innerhalb weniger Sekunden nach einer passenden Magnetisierungspräparation aufgenommenen radialen Gradienten-Echo-Datensatz, während die Messdauer herkömmlich verwendeter T1-Bestimmungstechniken üblicherweise im Bereich von einigen Minuten liegt. Nach der Validierung des MAP-Algorithmus für zwei unterschiedliche Arten der Magnetisierungspräparation (Sättigungspräparation, Inversion) wurde die entwickelte Technik im Rahmen dieser Arbeit in verschiedenen Bereichen der präklinischen und klinischen MRT angewendet und mögliche Vor- und Nachteile untersucht. KW - Kernspintomographie KW - Radiologische Diagnostik KW - Bildgebendes Verfahren KW - Magnetic Resonance Relaxometry KW - Magnetresonanz-Relaxometrie KW - Model Based Reconstruction Algorithms in Magnetic Resonance Imaging KW - Modellbasierte-Rekonstruktionsalgorithmen in der Magnetresonanztomografie KW - Relaxation Parameter Mapping in Magnetic Resonance Imaging KW - Bestimmung des Relaxations-Parameters in der Magnetresonanztomografie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-109774 ER - TY - JOUR A1 - Amthor, Matthias A1 - Weißenseel, Sebastian A1 - Fischer, Julian A1 - Kamp, Martin A1 - Schneider, Christian A1 - Höfling, Sven T1 - Electro-optical switching between polariton and cavity lasing in an InGaAs quantum well microcavity N2 - We report on the condensation of microcavity exciton polaritons under optical excitation in a microcavity with four embedded InGaAs quantum wells. The polariton laser is characterized by a distinct nonlinearity in the input-output-characteristics, which is accompanied by a drop of the emission linewidth indicating temporal coherence and a characteristic persisting emission blueshift with increased particle density. The temporal coherence of the device at threshold is underlined by a characteristic drop of the second order coherence function to a value close to 1. Furthermore an external electric field is used to switch between polariton regime, polariton condensate and photon lasing. KW - Quantum-well, -wire and -dot devices KW - Scattering KW - stimulated KW - Resonators KW - Microcavity devices Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-111130 ER - TY - JOUR A1 - Fiedler, Sebastian A1 - El-Kareh, Lydia A1 - Eremeev, Sergey V. A1 - Tereshchenko, Oleg E. A1 - Seibel, Christoph A1 - Lutz, Peter A1 - Kokh, Konstantin A. A1 - Chulkov, Evgueni V. A1 - Kuznetsova, Tatyana V. A1 - Grebennikov, Vladimir I. A1 - Bentmann, Hendrik A1 - Bode, Matthias A1 - Reinert, Friedrich T1 - Defect and structural imperfection effects on the electronic properties of BiTeI surfaces JF - New Journal of Physics N2 - The surface electronic structure of the narrow-gap seminconductor BiTeI exhibits a large Rashba-splitting which strongly depends on the surface termination. Here we report on a detailed investigation of the surface morphology and electronic properties of cleaved BiTeI single crystals by scanning tunneling microscopy, photoelectron spectroscopy (ARPES, XPS), electron diffraction (SPA-LEED) and density functional theory calculations. Our measurements confirm a previously reported coexistence of Te- and I-terminated surface areas originating from bulk stacking faults and find a characteristic length scale of ~100 nm for these areas. We show that the two terminations exhibit distinct types of atomic defects in the surface and subsurface layers. For electronic states resided on the I terminations we observe an energy shift depending on the time after cleavage. This aging effect is successfully mimicked by depositon of Cs adatoms found to accumulate on top of the I terminations. As shown theoretically on a microscopic scale, this preferential adsorbing behaviour results from considerably different energetics and surface diffusion lengths at the two terminations. Our investigations provide insight into the importance of structural imperfections as well as intrinsic and extrinsic defects on the electronic properties of BiTeI surfaces and their temporal stability. KW - electronic structure KW - spin–orbit coupling KW - surface morphology KW - semiconductor surfaces Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119467 SN - 1367-2630 VL - 16 IS - 075013 ER - TY - JOUR A1 - Lüftner, Daniel A1 - Milko, Matus A1 - Huppmann, Sophia A1 - Scholz, Markus A1 - Ngyuen, Nam A1 - Wießner, Michael A1 - Schöll, Achim A1 - Reinert, Friedrich A1 - Puschnig, Peter T1 - CuPc/Au(1 1 0): Determination of the azimuthal alignment by a combination of angle-resolved photoemission and density functional theory JF - Journal of Electron Spectroscopy and Related Phenomena N2 - Here we report on a combined experimental and theoretical study on the structural and electronic properties of a monolayer of Copper-Phthalocyanine (CuPc) on the Au(1 1 0) surface. Low-energy electron diffraction reveals a commensurate overlayer unit cell containing one adsorbate species. The azimuthal alignment of the CuPc molecule is revealed by comparing experimental constant binding energy (kxky)-maps using angle-resolved photoelectron spectroscopy with theoretical momentum maps of the free molecule's highest occupied molecular orbital (HOMO). This structural information is confirmed by total energy calculations within the framework of van-der-Waals corrected density functional theory. The electronic structure is further analyzed by computing the molecule-projected density of states, using both a semi-local and a hybrid exchange-correlation functional. In agreement with experiment, the HOMO is located about 1.2 eV below the Fermi-level, while there is no significant charge transfer into the molecule and the CuPc LUMO remains unoccupied on the Au(1 1 0) surface. KW - density functional theory KW - angle-resolved photoemission spectroscopy KW - organic molecule KW - organic–metal interface Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-120986 SN - 0368-2048 VL - 195 ER - TY - JOUR A1 - Tvingstedt, Kristofer A1 - Malinkiewicz, Olga A1 - Baumann, Andreas A1 - Deibel, Carsten A1 - Snaith, Henry J. A1 - Dyakonov, Vladimir A1 - Bolink, Henk J. T1 - Radiative efficiency of lead iodide based perovskite solar cells JF - Scientific Reports N2 - The maximum efficiency of any solar cell can be evaluated in terms of its corresponding ability to emit light. We herein determine the important figure of merit of radiative efficiency for Methylammonium Lead Iodide perovskite solar cells and, to put in context, relate it to an organic photovoltaic (OPV) model device. We evaluate the reciprocity relation between electroluminescence and photovoltaic quantum efficiency and conclude that the emission from the perovskite devices is dominated by a sharp band-to-band transition that has a radiative efficiency much higher than that of an average OPV device. As a consequence, the perovskite have the benefit of retaining an open circuit voltage ~0.14 V closer to its radiative limit than the OPV cell. Additionally, and in contrast to OPVs, we show that the photoluminescence of the perovskite solar cell is substantially quenched under short circuit conditions in accordance with how an ideal photovoltaic cell should operate. KW - solar cells KW - optical spectroscopy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119360 VL - 4 ER - TY - JOUR A1 - Baumann, A. A1 - Tvingstedt, K. A1 - Heiber, M. C. A1 - Väth, S. A1 - Momblona, C. A1 - Bolink, H. J. A1 - Dyakonov, V. T1 - Persistent photovoltage in methylammonium lead iodide perovskite solar cells JF - APL Materials N2 - We herein perform open circuit voltage decay (OCVD) measurements on methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells to increase the understanding of the charge carrier recombination dynamics in this emerging technology. Optically pulsed OCVD measurements are conducted on CH3NH3PbI3 solar cells and compared to results from another type of thin-film photovoltaics, namely, the two reference polymer–fullerene bulk heterojunction solar cell devices based on P3HT:PC60BM and PTB7:PC70BM blends. We observe two very different time domains of the voltage transient in the perovskite solar cell with a first drop on a short time scale that is similar to the decay in the studied organic solar cells. However, 65%–70% of the maximum photovoltage persists on much longer timescales in the perovskite solar cell than in the organic devices. In addition, we find that the recombination dynamics in all time regimes are dependent on the starting illumination intensity, which is also not observed in the organic devices. We then discuss the potential origins of these unique behaviors. KW - solar cells KW - illumination KW - dielectric oxides KW - carrier density KW - bioelectrochemistry Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119397 VL - 2 IS - 8 ER - TY - JOUR A1 - Maier, Sebastian A1 - Gold, Peter A1 - Forchel, Alfred A1 - Gregersen, Niels A1 - Mork, Jesper A1 - Höfling, Sven A1 - Schneider, Christian A1 - Kamp, Martin T1 - Bright single photon source based on self-aligned quantum dot-cavity systems JF - Optics Express N2 - We report on a quasi-planar quantum-dot-based single-photon source that shows an unprecedented high extraction efficiency of 42% without complex photonic resonator geometries or post-growth nanofabrication. This very high efficiency originates from the coupling of the photons emitted by a quantum dot to a Gaussian shaped nanohill defect that naturally arises during epitaxial growth in a self-aligned manner. We investigate the morphology of these defects and characterize the photonic operation mechanism. Our results show that these naturally arising coupled quantum dot-defects provide a new avenue for efficient (up to 42% demonstrated) and pure (g(2)(0) value of 0.023) single-photon emission. KW - photon statistics KW - quantum communications KW - resonators KW - quantum-well -wire and -dot devices Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119801 SN - 1094-4087 VL - 22 IS - 7 ER - TY - JOUR T1 - Search for the \(X_b\) and other hidden-beauty states in the \(π^+π^−ϒ\)(1S) channel at ATLAS JF - Physics Letters B N2 - This Letter presents a search for a hidden-beauty counterpart of the X(3872) in the mass ranges of 10.05–10.31 GeV and 10.40–11.00 GeV, in the channel X\(_b\)→π\(^+\)π\(^−\)ϒ(1S)(→μ\(^+\)μ\(^−\)), using 16.2 fb\(^{−1}\) of s=8 TeV \(pp\) collision data collected by the ATLAS detector at the LHC. No evidence for new narrow states is found, and upper limits are set on the product of the X\(_b\) cross section and branching fraction, relative to those of the ϒ(2S), at the 95% confidence level using the CLSCLS approach. These limits range from 0.8% to 4.0%, depending on mass. For masses above 10.1 GeV, the expected upper limits from this analysis are the most restrictive to date. Searches for production of the ϒ(1\(^3\)D\(_J\)), ϒ(10860), and ϒ(11020) states also reveal no significant signals. KW - physics KW - hidden-beauty states Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138273 VL - 740 ER - TY - THES A1 - Thierschmann, Holger T1 - Heat Conversion in Quantum Dot Systems T1 - Wärmeumwandlung in Quantenpunktsystemen N2 - This thesis treats the thermopower and other thermal effects in single quantum dots (QD) and quantum dot systems. It contributes new experimental results to the broad and active field of research on thermoelectrics in low dimensional systems. The thermopower experiments discussed in this work focus on QDs which exhibit a net spin and on tunnel-coupled double QDs (DQD). Furthermore, experiments are presented which address the realization of a QD device which extracts thermal energy from a heat reservoir and converts it into a directed charge current in a novel way. The samples used for these investigations have been fabricated from GaAs/AlGaAs heterostructures which contain a two dimensional electron gas. Using optical and electron beam lithography, the devices have been realized by means of the top-gate technology. All experiments have been performed at low temperature. In order to create a controllable temperature difference in the samples the current heating technique has been used. These experimental basics as well as fundamentals of electric and thermoelectric transport are introduced in Part I of this thesis. The experiments on the thermopower of a single QD are described in Part II. Essentially, they deal with the problem of how a single spin situated on a QD influences the thermoelectric properties of the system. In this context, the Kondo-effect plays a crucial role. Generally, the Kondo effect is the result of a many-body state which arises from an antiferromagnetic coupling of a magnetic impurity with the surrounding conduction electrons. Here, the magnetic impurity is represented by a QD which is occupied with an odd number of electrons so that it exhibits a net spin. For the first time the thermopower of a Kondo-QD has been studied systematically as a function of two parameters, namely the QD coupling energy and the sample temperature. Both parameters are crucial quantities for Kondo-physics to be observed. Based on these data, it is shown that the thermopower line shape as a function of QD energy is mainly determined by two competing contributions: On the one hand by the enhanced density of states around the Fermi level due to Kondo-correlations and on the other hand by thermopower contributions from the Coulomb resonances. Furthermore, the experiments confirm theoretical predictions which claim that the spectral DOS arising from Kondo-correlations shifts away from the Fermi level for those QD level configurations which are not electron-hole symmetric. Comparison with model calculations by T. Costi and V. Zlatic [Phys. Rev. B 81, 235127 (2010)] shows qualitative and partly even quantitative agreement. A finite thermovoltage at the center of the Kondo-region, which occurred in previous investigations, is also observed in the experiments presented here. It is not covered by the current theory of the Kondo effect. The dependence of this signal on temperature, coupling energy and magnetic field, which differ from non-Kondo regions, is analyzed. In order to clarify the physics behind this phenomenon further studies are desirable. Furthermore, it is shown by variation of the QD coupling energy over a wide range that Kondo-correlations can be detected in the thermopower even in the regime of very weak coupling. In contrast, no Kondo signatures are visible in the conductance in this energy range. It is found that in the limit of weak coupling the Kondo effect causes the thermopower to exhibit a diminished amplitude in close vicinity of a conductance resonance. Subsequent filling of spin-degenerate states then leads to a thermopower amplitude modulation (odd-even-effect). Although this effect had been observed in previous studies, no connection to Kondo physics had been established in order to explain the observations. Hence, the experiments on a single QD presented in this thesis provide unique insight into the complex interplay of different transport mechanisms in a spin-correlated QD. Moreover, the results confirm the potential of thermopower measurements as a highly sensitive tool to probe Kondo-correlations. In Part III thermal effects are investigated in systems which contain two coupled QDs. Such QD-systems are particularly interesting with respect to thermoelectric applications: Many proposals utilize the extremely sharp energy filtering properties of such coupled QDs and also different kinds of inter dot coupling to construct novel and highly efficient thermoelectric devices. In the present work, thermopower characterizations are performed on a tunnel-coupled DQD for the first time. The key result of these investigations is the thermopower stability diagram. Here it is found, that in such a system maximal thermopower is generated in the vicinity of the so-called triple points (TP) at which three charge states of the DQD are degenerate. Along the axis of total energy, which connects two adjacent TP, a typical thermopower line shape is observed. It is explained and modeled within an intuitive picture that assumes two transport channels across the DQD, representing the TP. For those regions which are far away from the TP, the thermopower turns out to be very sensitive to the relative configuration of the QD energies. The conductance and thermopower data are well reproduced within a model that assumes transport via molecular states. Integration of both models into one then allows model calculations for a complete stability cell in conductance and thermopower to be done. Furthermore, experiments on two capacitively coupled QDs are presented. In these studies the focus lies on testing the feasibility of such systems for the manipulation and generation of charge currents from thermal energy. In a series of experiments it is shown that such a system of QDs can be utilized to increase or decrease a current flowing between two electron reservoirs by varying the temperature in a third reservoir. This effect is based on the cross-correlation of occupation fluctuations of the individual QDs. These are positive for certain QD energy level configurations and negative for others, which increases or decreases the charge current in the experiments, respectively. In the stability diagram this is manifested in a characteristic clover leaf shaped structure of positive and negative current changes in vicinity of the TP. All main experimental results are reproduced qualitatively in simple model calculations. Due to the close analogy between electrical and thermal conductance of a QD, this effect of thermal switching can, in principle, also be used to built a thermal transistor. Finally, it is shown that a system consisting of two Coulomb-coupled QDs, which couple a hot electron reservoir electrostatically to two cold electron reservoirs, can be utilized as a novel device which extracts heat from its environment and converts it into a directed charge current. The idea of this heat-to-current converter (HCC) was first proposed by R. Sánchez and M. Büttiker [Phys. Rev. B 83, 085428 (2011)]. It is not only characterized by the novelty of its working principle but also by the fact, that it decouples the directions of charge current and energy flow. In the experiments presented here, such HCC-currents are identified unambiguously: For certain QD-level configurations an electric current between the two cold reservoirs is observed if the temperature in the third reservoir is increased. The direction of this current is shown to be independent of an external voltage. In contrast, the direction of the current exhibits a characteristic dependence on the tunneling coefficients of the QDs, as predicted by theory: By adjusting the thickness and the shape of the respective tunnel junctions, a charge current can be generated between two cold reservoirs, and it can even be inverted. The experimental observations are quantitatively reproduced by model calculations by R. Sánchez and B. Sothmann. Thus, the results represent direct evidence for the existence of HCC-currents. Due to the novelty of the working principle of the HCC and its relevance from a fundamental scientific point of view, the results presented here are an important step towards energy harvesting devices at the nano scale. N2 - Die vorliegende Arbeit befasst sich mit der Thermokraft und anderen thermischen Effekten in einzelnen Quantenpunkten (QP) und Quantenpunktsystemen. Sie liefert durch neue experimentelle Ergebnisse einen Beitrag zu dem breiten und besonders in jüngster Zeit stark beachteten Themenkomplex der Thermoelektrik in niedrigdimensionalen Systemen. Im Fokus stehen hier die Thermokraft von spin-besetzten QP und tunnelgekoppelten Doppelquantenpunkten (DQP) sowie die Realisierung von neuartigen W\ärmemaschinen mit Hilfe von QP-Systemen. Die für diese Untersuchungen verwendeten Proben wurden mit Hilfe der sogenannten split-gate Technologie lithographisch in einem zweidimensionalen Elektronengas innerhalb des Halbleiterschichtsystems GaAs/AlGaAs realisiert. Sämtliche Experimente wurden bei tiefen Systemtemperaturen durchgeführt. Zur kontrollierten Erzeugung einer Temperaturdifferenz wurde die sogenannte Stromheiztechnik verwendet. Diese experimentellen Grundlagen sowie allgemeine Hintergründe zur Physik von elektrischem und thermoelektrischem Transport werden im Gundlagenteil, Teil I, behandelt. Die Thermokraftexperimente an einzelnen QP sind in Teil II dieser Arbeit beschrieben. Sie befassen sich im Kern mit der Frage, auf welche Art einzelne Spins in einem QP die Thermokraft des Systems beeinflussen. In diesem Zusammenhang ist der Kondoeffekt von zentraler Bedeutung. Der Kondoeffekt resultiert allgemein aus einem Vielteilchenzustand, der durch die antiferromagnetische Kopplung einer magnetischen Verunreinigung mit Leitungselektronen der angrenzenden Reservoire hervorgerufen wird. Die magnetische Verunreinigung wird hier durch einen QP dargestellt, der Aufgrund einer ungeraden Besetzungszahl von Elektronenspins ein magnetisches Moment besitzt. In den präsentierten Experimenten wird erstmals systematisch der Verlauf der Thermokraft eines Kondo-QP in Abhängigkeit von den beiden Parametern Kopplungsenergie und Systemtemperatur untersucht. Diese beiden Parameter legen im Wesentlichen die Ausprägung des Kondozustandes fest. Auf der Basis dieser Daten wird gezeigt, dass der Verlauf der Thermokraft maßgeblich von dem konkurrierenden Einfluss zweier Beiträge bestimmt wird: Einerseits der Thermokraft resultierend aus einer erhöhten Zustandsdichte nahe der Fermienergie aufgrund von Kondokorrelationen und andererseits dem Beitrag der Coulombresonanzen. Des Weiteren belegen die Experimente die theoretisch vorhergesagte Verschiebung der spektralen Zustandsdichte auf dem QP weg von der Fermienergie, und zwar für solche Energieniveaukonfigurationen, welche nicht elektron-loch-symmetrisch sind. Vergleiche mit numerischen Berechnungen von T. Costi und V. Zlatic [Phys. Rev. B 81, 235127 (2010)] zeigen qualitative und teilweise sogar quantitative Übereinstimmung. Eine im Zentrum des Kondobereiches entstehende, elektronenartige Thermospannung, wie sie bereits in früheren Untersuchungen zum Kondoeffekt beobachtet wurde, kann auch in den Experimenten hier festgestellt werden. Sie wird durch die gegenwärtige Theorie zum Kondoeffekt nicht erklärt. Die experimentell gefundenen Abhängigkeiten dieses Signals von Temperatur, Kopplungsenergie und Magnetfeld unterscheiden sich von denen in Nicht-Kondobereichen und werden analysiert. Zur Klärung des physikalischen Hintergrundes dieses Phänomens sind weiterführende Experimente wünschenswert. Durch Variation der Kopplungsenergie über einen sehr weiten Bereich wird zudem gezeigt dass sich Kondokorrelationen noch bis hin zu sehr schwacher Kopplung in der Thermokraft nachweisen lassen. In diesen Energiebereichen weist der entsprechende Leitwert keinerlei Kondosignaturen mehr auf. Für die Thermospannung bewirkt der Kondoeffekt im Grenzfall schwacher Kopplung eine Reduktion der Amplitude nahe der Coulombresonanzen. Bei regelmäßiger Auffüllung von spin-entartetn QP-Orbitalen führt dies zu einer Amplitudenmodulation (Ungerade-Gerade-Effekt), wie sie bereits in früheren Arbeiten beobachtet, dort jedoch nicht mit Kondokorrelationen in Verbindung gebracht wurde. In ihrer Summe geben die Experimente auf einzigartige Weise neue Einblicke in das komplexe Zusammenwirken verschiedener Transportmechanismen in einem spinkorrelierten QP. Sie belegen das Potenzial von Thermokraftmessungen als hochsensitives Instrument zur Erforschung von Kondokorrelationen. In Teil III werden thermische Effekte in Systemen untersucht, welche zwei gekoppelte QP enthalten. Solche QP-Systeme sind insbesondere für thermoelektrische Anwendungen interessant: Zahlreiche Vorschläge nutzen die besonders präzisen Energiefiltereigenschaften von gekoppelten QP, aber auch unterschiedliche Arten der Kopplung zwischen den QP, zur Konzeption von neuen, hocheffizienten thermoelektrischen Bauteilen und neuartigen Wärme-Strom-Wandlern. In der vorliegenden Arbeit werden erstmalig Thermokraftmessungen an einem tunnelgekoppelten DQP in serieller Anordnung untersucht. Das zentrale Ergebnis dieser Experimente ist das Thermokraftstabilitätsdiagramm. Hier lässt sich beobachten, dass das System in der Region um die Tripelpunkte (TP), an denen drei Ladungszustände des DQP entartet sind, maximale Thermospannungen erzeugt. Entlang der Achse der Gesamtenergie wird ein charakteristischer Verlauf der Thermospannung beobachtet, der unter Annahme zweier Transportkanäle über den DQP, die TP, erklärt und modelliert werden kann. Abseits der TP zeigt sich, dass die Thermospannung höchst sensitiv auf die relative Anordnung der einzelnen QP-Energien reagiert. Eine Beschreibung des Ladungstransports durch molekülartige Zustände gibt hier die experimentellen Beobachtungen sehr gut wieder. Zusammenführung der Modelle für den Bereich nahe und fernab der TP erlaubt schliesslich die vollständige Modellierung des Stabilitätsdiagramms in Leitwert und Thermokraft. Des Weiteren werden Experimente an QP-Systemen mit zwei kapazitiv gekoppelten QP gezeigt. Hier steht die Nutzung solcher Systeme zur Manipulation oder Generation von elektrischen Strömen durch thermische Energie im Mittelpunkt. Es wird gezeigt, dass sich ein System kapazitiv gekoppelter QP eignet, den elektrischen Strom zwischen zwei Elektronenreservoiren durch Änderung der Temperatur in einem dritten Reservoir kontrolliert zu vergrössern oder zu vermindern. Der Effekt basiert dabei auf der Kreuzkorrelation der Elektronenbesetzungsfluktuation der beiden QP, welche in einigen QP-Energiekonstellationen positiv und in anderen Einstellungen negativ ist. So führt ersteres in den Experimenten bei Erhöhung der Temperatur zu einer Vergrösserung, letzters zu einer Verminderung des Stromflusses. Im Stabilitätsdiagramm erzeugt dieser Mechansimus ein charakteristisches Kleeblattmuster aus positiven und negativen Stromänderungen im Bereich der TP. Durch einfache Modellrechnungen können sämtliche experimentellen Beobachtungen qualitativ reproduziert werden. Aufgrund der Analogie zwischen Ladungstransport und Wärmetransport in einem QP ist auch eine Funktionsweise als rein thermischer Transistor denkbar. Schliesslich wird nachgewiesen, dass ein solches System aus zwei elektrostatisch wechselwirkenden QP und drei Elektronenreservoiren dazu genutzt werden kann, um auf neuartige Weise thermische Energie in einen gerichteten Ladungsstrom umzuwandeln. Das Konzept dieses Wärme-Strom-Wandlers (engl: Heat-to-Current Converter, HCC) folgt dabei einem Vorschlag von R. Sánchez und M. Büttiker [Phys. Rev. B 83, 085428 (2011)]: Es zeichnet sich nicht nur dadurch aus, dass der zugrundeliegende Mechanismus der Wärmewandlung neu ist, sondern auch dadurch, dass in diesem System die Richtungen von elektrischem Strom und Wärmestrom voneinander entkoppelt sind. In den hier präsentierten Experimenten können solche HCC-Ströme eindeutig nachgewiesen werden: Für bestimmte QP-Energiekonfigurationen wird ein elektrischer Strom zwischen den beiden kalten Reservoiren beobachtet, wenn die Temperatur in dem dritten Reservoir erhöht wird. Es wird gezeigt, dass die Richtung dieses Stroms unabhängig von einer extern angelegten Spannung ist. Die Stromrichtung läßt sich jedoch, wie durch die Theorie gefordert, durch Änderung der Tunnelkoeffizienten der QP beeinflussen. Sie kann durch Variation der Dicke und der Form der entsprechenden Tunnelbarrieren invertiert werden. Die experimentellen Beobachtungen werden durch Modellrechnungen von B. Sothmann und R. Sánchez quantitativ reproduziert. Sie sind somit ein direkter Beleg für die Existenz von HCC-Strömen. Aufgrund der Neuartigkeit des Konzepts und seiner Bedeutung für weitere thermoelektrische Anwendungen sind die hier präsentierten Ergebnisse ein wichtiger Schritt auf dem Weg hin zur Realisierung von Wärmemaschinen auf der Nanoskala. KW - Quantenpunkt KW - Thermoelektrizität KW - multi-terminal devices KW - coulomb coupled quantum dots KW - thermoelectrics KW - heat conversion KW - single electron transistor KW - Coulomb-Blockade KW - Kondo-Effekt KW - Energy Harvesting Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-133348 ER - TY - THES A1 - Gorenflot, Julien François T1 - Optical study of the excited states in the semiconducting polymer poly(3-hexylthiophene) for photovoltaic applications T1 - Untersuchung angeregter Zustände des halbleitenden Polymers Poly(3-hexylthiophene) mittels optischer Spektroskopie für Anwendungen in der Photovoltaik N2 - In the course of this dissertation, we have presented the interest of using spectroscopic methods to unravel the physics of polymer semiconductors in photovoltaic applications. Applying photoluminescence and photoinduced absorption spectroscopy to the reference system P3HT:PCBM has enabled us to study the major steps of photocurrent generation in organic bulk heterojunctions, from excitons generation to charges extraction and loss mechanisms and thus to improve the understanding of those mechanisms. The exciton binding energy, is the first obstacle to overcome for photocurrent generation in organic solar cell and the reason for the use of two materials, whose heterojunction act as a driving force for charge separation. We developed an original photoluminescence-detected field-induced exciton quenching method to investigate this energy. Absorption and photoluminescence spectra of pure P3HT show that, while both amorphous and crystalline domains participate in absorption, the energy is then transferred to the crystalline domains, from where the photoluminescence is exclusively originating. The field dependence of this photoluminescence showed that an energy of no less than 420 meV is necessary to split excitons into non photon-emitting species. Comparing those results with energy levels obtained by absorption and photoelectron spectroscopies, confirmed that the formation of those species is only a first step toward dissociation into free charges. Indeed, photoemission spectroscopy and the onset of photocurrent upon increasing the photon energy in a pure P3HT solar cell, concomitantly show that the energy level of a pair of free polarons is located 0.7 eV above the one of the exciton. The comprehensive analysis of those results originating from those different method enable us to draw a global picture of the states and energies involved in free polarons generation in pure material. This work has been widely acknowledged by the scientific community, published in Physical Review B in 2010 [1] and presented in national [2] and international [3] conferences. The spectroscopy of excited states is used to detect the presence of wanted species (charges) and potentially unwanted neutral species upon photoexcitation. As such, it offers us the possibility to qualify the efficiency of charge generation and, if any, identify the competing processes and the generation of unwanted species. In the frame of the European Marie Curie Research Network SolarNType,[4] this possibility was used - in combination with morphological, charge transport and devices characterizationsn - to study a number of new donor:acceptor blends. Thanks to those techniques, we were able to not only quantify the potential of those blends, but also to provide the chemist laboratories with a precious and detailed feedback on the strengths and weakness of the molecules, regarding charge generation, transport and extraction. The detailed study of terrylene-3,4:11,12-bis(dicarboximide) as electron acceptor for solar cells application was published in the peer review journal Synthetic Metals and was chosen to illustrate the cover page of the issue [5]. Finally, in the last chapter, we have used time resolved photoinduced absorption to improve the understanding of the charge carrier loss mechanisms in P3HT:PCBM active layers. This comprehension is of prime importance because, the fact that this recombination is far weaker than expected from the Langevin theory, enable polarons to travel further without recombining and thus to build thicker and more efficient devices. A comprehensive analysis of steady-state PIA spectra of pure P3HT, indicates that probing at 980 nm at a temperature between 140 and 250 K enables to monitor specifically polaron densities in both neat P3HT and P3HT:PCBM. Applying this finding to transient absorption enabled us to monitor, for the first time, the bimolecular recombination in pure P3HT, and to discover that - in sharp contrast with the blend - this recombination was in agreement with the Langevin theory. Moreover, it enables us to pinpoint the important role played by the existence of two materials and of energetical traps in the slow recombination and high recombination orders observed in the blend. This work has been published in the Journal of Applied Physics.[6] Those new insights in the photophysics of polymer:fullerene photoactive layers could have a strong impact on the future developement of those materials. Consistent measurements of the binding energy of excitons and intermediate species, would enable to clarify the role played by excess thermal energy in interfacial states dissociation. Better understanding of blends morphology and its influence on solar cells parameters and in particular on recombination could enable to reproduce the conditions of limited recombination on material systems offering some promising performances but with only limited active layer thicknesses. However, due to the number of parameters involved, further experimentation is required, before we can reach a quantitative modeling of bimolecular recombination. [1] Deibel et al., Phys. Rev. B, 81:085202, 2010 [2] Gorenflot et al., Deutsche Physikalische Gesellschaft Frühjahrstagung 2010, CPP20:10, Regensburg, Germany, 2010 [3] Gorenflot et al., International Conference of Synthetic Metals, 7Ax:05, Kyoto, Japan, 2010 [4] Marie-Curie RTN "SolarNTyp" Contract No. MRTN-CT-2006-035533 [5] Gorenflot et al., Synth. Met., 161(23{24):2669-2676, 2012 [6] Gorenflot et al., J. Appl. Phys., 115(14):144502, 2014 N2 - In der vorliegenden Arbeit wurden die zugrundeliegenden Mechanismen, die während der Photostromgeneration in Polymer:Fulleren-Solarzellen stattfinden, von der Exzitonengeneration bis zur Ladungsträgerextraktion, mittels spektroskopischer Methoden untersucht. Nach der Absorption eines Photons ist die Exzitonenbindungsenergie das erste zu überwindende Hindernis, um einen Photostrom in organischen Halbleitern zu generieren. Diese begründet die Notwendigkeit, zwei unterschiedliche Halbleitermaterialien zu implementieren, deren energetischer Offset die treibende Kraft für Exzitonentrennung am Heterogrenzfläsche bildet. Zur Erforschung dieser Energie haben wir eine neuartige Methode entwickelt, mit welcher wurden Einfluss eines elektrischen Feldes auf die Exzitonen durch Photolumineszenzmessungen quantifizieren können. Aus Absorptions- und Photolumineszenzspektren ist ersichtlich, dass im reinen P3HT sowohl amorphe als auch kristalline Bereiche zur Absorption beitragen. Daraufhin erfolgt ein anschließender effektiver. Energietransfer zu den kristallinen Domänen, der durch die ausschließlich in diesen Bereichen auftretende Photolumineszenz nachgewiesen wird. Diese Exzitonen sind als interchain excitons bekannt, die bereits bei 0.42 eV; in nicht emittierende Spezies dissoziiert werden können, wie unsere feldabhängigen Photolumineszenzmessungen zeigen. Mit Hilfe komplementärer Methoden konnten wir nachweisen, dass diese Dissoziation nur ein erster Schritt zur Generation freier Ladungsträger ist. So konnte durch Photoelektronenspektroskopie 10 und Messungen der externen Quanteneffizienz gezeigt werden, dass die Erstellung freier Ladungsträger 0.7 eV benötigt. Die zusammenführende Analyse dieser Ergebnisse ermöglicht die Erstellung eines umfassenden Bildes der für die Photostromgeneration relevanten Energieniveaus in reinem P3HT. Desweiteren wurden die Ergebnisse dieser Arbeit national [1] als auch international [2] auf Konferenzen präsentiert und im Jahr 2010 in Physical Review B [3] publiziert. Die Tatsache, dass diese bereits über 50 mal zitiert wurden, verdeutlicht die große Bedeutung der erlangten Resultate. Durch die Verwendung der Quasi-Steady-State-Spektroskopie angeregter Spezies können unter Beleuchtung erwünschte (Ladungsträger) und unerwünschte (neutrale) Zustände detektiert werden. Im Rahmen des EU-Projekts "SolarNType" [4] wurden dazu mehrere, als Elektronenakzeptor dienende, Moleküle teilnehmender Institutionen untersucht. Mit Hilfe unserer spektroskopischen Methode und durch ergänzende Messungen des Ladunsträgerstransports sowie der Morphologie und Strom-Spannungs-Charakteristiken der Solarzellen waren wir im Stande, nicht nur das Potential dieser Moleküle zu beurteilen, sondern auch unseren Projektmitarbeitern detaillierte und wertvolle Informationen über die Stärken und Schwächen der von ihnen synthetisierten Materialien zu geben. Die detaillierte Untersuchung von terrylene-3,4:11,12-bis(dicarboximide) als Elektronenakzeptor, welche wir für das Max-Planck-Institut in Mainz erstellten, wurde im Jahr 2012 in Synthetic Metals publiziert und für die Titelseite ausgewählt. [5] Im letzten Abschnitt werden die Ergebnisse transienter photoinduzierter Absorptionsmessungen diskutiert, welche zur Bestimmung der Rekombination freier Ladunsträger in P3HT:PCBM Mischschichten durchgeführt wurden. Diese Rekombination ist dafür bekannt, nicht der Langevin-Theorie zu folgen, was für Solarzellen von großer Bedeutung ist. Anstelle von Rekombination zweiter Ordnung nach der Langevin-Theorie, rekombinieren Ladungsträger in dieser Materialkombination unter höherer Ordnung und einem starken zusätzlichen Reduktionsfaktor. Dies hat zur Folge, dass die Ladungsträger weiter difundieren können, was die Erstellung dickerer und daher effizienterer Solarzellen ermöglicht. Durch umfassende Analysen der P3HT Quasi-Steady-State-Spektren wurde einspektraler sowie thermischer Bereich identifiziert, in dem in reinem P3HT ausschließlich Polaronen für die Absorption verantwortlich sind. Die Verwendung dieser Ergebnisse in transienten Absorptionsmessungen ermöglichte es erstmals, das Rekombinationsverhalten in reinen sowie mit PCBM gemischten P3HT Schichten zu vergleichen. Es zeigt sich, dass die Abnahme der Ladungsträgerdichte in reinem P3HT der Langevin-Theorie perfekt folgt. Demzufolge scheint die beobachtete limitierte Rekombination in gemischten P3HT:PCBM-Schichten aus der Präsenz zweier unterschiedlicher Materialien zu resultieren. Nach der Betrachtung mehrerer möglicher Mechanismen kommen wir zu dem Schluss, dass eine Kombination von energetischem Trapping und Phasenseparation für dieses Verhalten verantwortlich ist. Diese Ergebnisse wurden im Jahr 2014 in the Journal of Applied Physics publiziert. [6] Die erlangten neuen Einblicke in die photophysischen Eigenschaften von Polymer:Fulleren-Mischschichten besitzen große Bedeutung für die weitere Entwicklung in diesem Bereich. Systematische Messungen der Bindungsenergien von Exzitonen sowie Polaronenpaaren scheinen eine vielversprechende Methode zu sein, die Bedeutung der Exzitonen-Überschussenergie für die Photostromgeneration zu verstehen. Ein besseres Verständnis der Mischungsmorphologie sowie ihren Einfluss auf die bimolekulare Rekombinationsdynamik bahnt den Weg zur Steigerung der Leistung in vielversprechenden Materialsystemen, die bisher durch die limitierte Dicke der Solarzellen eingeschränkt ist. Allerdings bedingt die große Anzahl an Faktoren, die in diesen Rekombinationsmechanismen eine Rolle spielen, weitere fundierte experimentelle Ergebnisse, bevor eine quantitative Modellierung der Prozesse erreicht werden kann. [1] Gorenflot et al., Deutsche Physikalische Gesellschaft Frühjahrstagung 2010, CPP20:10, Regensburg, Germany, 2010 [2] Gorenflot et al., International Conference of Synthetic Metals, 7Ax:05, Kyoto, Japan, 2010 [3] Deibel et al., Phys. Rev. B, 81:085202, 2010 [4] Marie-Curie RTN "SolarNTyp" Contract No. MRTN-CT-2006-035533 [5] Gorenflot et al., Synth. Met., 161(23{24):2669-2676, 2012 [6] Gorenflot et al., J. Appl. Phys., 115(14):144502, 2014 KW - Organische Solarzelle KW - Fotovoltaik KW - Organischer Halbleiter KW - Renewable energies KW - Solar energy KW - Excited states spectroscopy KW - Organic semiconductors KW - Semiconductors physics KW - Plastic electronics KW - Excitons KW - Experimental physics KW - Disordered semiconductor KW - Charges recombination KW - Spectroscopy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-116730 ER - TY - JOUR A1 - Rau, Markus A1 - Heindel, Tobias A1 - Unsleber, Sebastian A1 - Braun, Tristan A1 - Fischer, Julian A1 - Frick, Stefan A1 - Nauerth, Sebastian A1 - Schneider, Christian A1 - Vest, Gwenaelle A1 - Reitzenstein, Stephan A1 - Kamp, Martin A1 - Forchel, Alfred A1 - Höfling, Sven A1 - Weinfurter, Harald T1 - Free space quantum key distribution over 500 meters using electrically driven quantum dot single-photon sources-a proof of principle experiment JF - New Journal of Physics N2 - Highly efficient single-photon sources (SPS) can increase the secure key rate of quantum key distribution (QKD) systems compared to conventional attenuated laser systems. Here we report on a free space QKD test using an electrically driven quantum dot single-photon source (QD SPS) that does not require a separate laser setup for optical pumping and thus allows for a simple and compact SPS QKD system. We describe its implementation in our 500 m free space QKD system in downtown Munich. Emulating a BB84 protocol operating at a repetition rate of 125 MHz, we could achieve sifted key rates of 5-17 kHz with error ratios of 6-9% and g((2))(0)-values of 0.39-0.76. KW - QKD KW - electrically driven KW - free space KW - quantum dots KW - quantum key distribution Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-116760 VL - 16 IS - 043003 ER - TY - JOUR A1 - Braun, T. A1 - Schneider, C. A1 - Maier, S. A1 - Igusa, R. A1 - Iwamoto, S. A1 - Forchel, A. A1 - Höfling, S. A1 - Arakawa, Y. A1 - Kamp, M. T1 - Temperature dependency of the emission properties from positioned In(Ga)As/GaAs quantum dots JF - AIP Advances N2 - In this letter we study the influence of temperature and excitation power on the emission linewidth from site-controlled InGaAs/GaAs quantum dots grown on nanoholes defined by electron beam lithography and wet chemical etching. We identify thermal electron activation as well as direct exciton loss as the dominant intensity quenching channels. Additionally, we carefully analyze the effects of optical and acoustic phonons as well as close-by defects on the emission linewidth by means of temperature and power dependent micro-photoluminescence on single quantum dots with large pitches. (C) 2014 Author(s). KW - GAAS Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-115448 SN - 2158-3226 VL - 4 IS - 9 ER - TY - THES A1 - Kern, Johannes T1 - Optical and electrical excitation of nanoantennas with atomic-scale gaps T1 - Optische und elektrische Anregung von Nanoantennen mit atomar kleinen Spalten N2 - Nano-antennas are an emerging concept for the manipulation and control of optical fields at the sub-wavelength scale. In analogy to their radio- and micro-wave counterparts they provide an efficient link between propagating and localized fields. Antennas operating at optical frequencies are typically on the order of a few hundred nanometer in size and are fabricated from noble metals. Upon excitation with an external field the electron gas inside the antenna can respond resonantly, if the dimensions of the antenna are chosen appropriate. Consequently, the resonance wavelength depends on the antenna dimensions. The electron-density oscillation is a hybrid state of electron and photon and is called a localized plasmon resonance. The oscillating currents within the antenna constitute a source for enhanced optical near-fields, which are strongly localized at the metal surface. A particular interesting type of antennas are pairs of metal particles separated by a small insulating gap. For anti-symmetric gap modes charges of opposite sign reside across the gap. The dominating field-components are normal to the metal surface and due to the boundary conditions they are sizable only inside the gap. The attractive Coulomb interaction increases the surface-charge accumulation at the gap and enhanced optical fields occur within the insulating gap. The Coulomb interaction increases with decreasing gap size and extreme localization and strongest intensity enhancement is expected for small gap sizes. In this thesis optical antennas with extremely small gaps, just slightly larger than inter-atomic distances, are investigated by means of optical and electrical excitation. In the case of electrical excitation electron tunneling across the antenna gap is exploited. At the beginning of this thesis little was known about the optical properties of antennas with atomic scale gaps. Standard measurement techniques of field confinement and enhancement involving well-separated source, sample and detector are not applicable at atomic length-scales due to the interaction of the respective elements. Here, an elegant approach has been found. It is based on the fact that for closely-spaced metallic particles the energy splitting of a hybridized mode pair, consisting of symmetric and anti-symmetric mode, provides a direct measure for the Coulomb interaction over the gap. Gap antennas therefore possess an internal ruler which sensitively reports the size of the gap. Upon self-assembly side-by-side aligned nanorods with gap sizes ranging from 2 to 0.5nm could be obtained. These antennas exhibit various symmetric and anti-symmetric modes in the visible range. In order to reveal optical modes of all symmetries a novel scattering setup has been developed and is successfully applied. Careful analysis of the optical spectra and comparison to numerical simulations suggests that extreme field confinement and localization can occur in gaps down to 0.5 nm. This is possibly the limit of plasmonic enhancement since for smaller gaps electron tunneling as well as non-locality of the dielectric function affect plasmonic resonances. The strongly confined and intense optical fields provided by atomic-scale gaps are ideally suited for enhanced light-matter interaction. The interplay of intense optical-frequency fields and static electric fields or currents is of great interest for opto-electronic applications. In this thesis a concept has been developed, which allows for the electrical connection of optical antennas. By means of numerical simulations the concept was first verified for antennas with gap sizes on the order of 25 nm. It could be shown, that by attaching the leads at positions of a field minimum the resonant properties are nearly undisturbed. The resonance wavelengths shift only by a small amount with respect to isolated antennas and the numerically calculated near-field intensity enhancement is about 1000, which is just slightly lower than for an unconnected antenna. The antennas are fabricated from single-crystalline gold and exhibit superior optical and electrical properties. In particular, the conductivity is a factor of 4 larger with respect to multi-crystalline material, the resistance of the gap is as large as 1 TOhm and electric fields of at least 10^8 V/m can be continuously applied without damage. Optical scattering spectra reveal well-pronounced and tunable antenna resonances, which demonstrates the concept of electrically-connected antennas also experimentally. By combining atomic-scale gaps and electrically-connected optical antennas a novel sub-wavelength photon source has been realized. To this end an antenna featuring an atomic scale gap is electrically driven by quantum tunneling across the antenna gap. The optical frequency components of this fluctuating current are efficiently converted to photons by the antenna. Consequently, light generation and control are integrated into a planar single-material nano-structure. Tunneling junctions are realized by positioning gold nanoparticles into the antenna gap, using an atomic force microscope. The presence of a stable tunneling junction between antenna and particle is demonstrated by measuring its distinct current-voltage characteristic. A DC voltage is applied to the junction and photons are generated by inelastically tunneling electrons via the enhanced local density of photonic states provided by the antenna resonance. The polarization of the emitted light is found to be along the antenna axis and the directivity is given by the dipolar antenna mode. By comparing electroluminescence and scattering spectra of different antennas, it has been shown that the spectrum of the generated light is determined by the geometry of the antenna. Moreover, the light generation process is enhanced by two orders of magnitude with respect to a non-resonant structure. The controlled fabrication of the presented single-crystalline structures has not only pushed the frontiers of nano-technology, but the extreme confinement and enhancement of optical fields as well as the light generation by tunneling electrons lays a groundwork for a variety of fundamental studies and applications. Field localization down to the (sub-)nanometer scale is a prerequisite for optical spectroscopy with near-atomic resolution. Indeed, recently first pioneering experiments have achieved molecular resolution exploiting plasmon-enhanced Raman scattering. The small modal volume of antennas with atomic-scale gaps can lead to light-matter interaction in the strong coupling regime. Quantum electro-dynamical effects such as Rabi splitting or oscillations are likely when a single emitter is placed into resonant structures with atomic-scale gaps. The concept of electrically-connected optical antennas is expected to be widely applied within the emerging field of electro-plasmonics. The sub-wavelength photon source developed during this thesis will likely gain attention for future plasmonic nanocircuits. It is envisioned that in such a circuit the optical signal provided by the source is processed at ultrafast speed and nanometer-scales on the chip and is finally converted back into an electronic signal. An integrated optical transistor could be realized by means of photon-assisted tunneling. Moreover, it would be interesting to investigate, if it is possible to imprint the fermionic nature of electrons onto photons in order to realize an electrically-driven source of single photons. Non-classical light sources with the potential for on-chip integration could be built from electrically-connected antennas and are of great interest for quantum communication. To this end single emitters could be placed in the antenna gap or single electron tunneling could be achieved by means of a single-channel quantum point contact or the Coulomb-blockade effect. N2 - Nanoantennen sind ein zukunftweisendes Konzept für die Manipulation und Kontrolle von optischen Feldern auf der Subwellenlängen-Skala. Analog zu Radio- und Mikrowellenantennen können sie auf effiziente Weise propagierende und lokalisierte Felder ineinander umwandeln. Optische Antennen sind typischerweise nur einige hundert Nanometer groß und werden aus Edelmetallen hergestellt. Besitzt die Antenne passende geometrische Maße, kann das Elektronengas durch Anregung mit einem externen Feld in resonante Schwingungen versetzt werden. Die Resonanzwellenlänge ist somit durch die Antennengeometrie bestimmt. Die Elektronendichte-Schwingung ist ein Hybridzustand aus Elektron und Photon und wird lokalisierte Plasmonenresonanz genannt. Wird die Resonanz angeregt so kommt es zu oszillierenden Strömen, welche eine Quelle für verstärkte optische Nahfelder darstellen. Diese Felder sind an die Metalloberfläche gebunden und daher stark lokalisiert. Eine besonders interessante Antennengeometrie ist ein Paar von Metallpartikeln, die durch einen schmalen Spalt getrennt sind. Antisymmetrische Antennenmoden besitzen Ladungen mit entgegengesetzten Vorzeichen auf der jeweiligen Seite des Spalts. Die dominierenden elektrischen Felder stehen senkrecht zur Metalloberfläche und sind aufgrund der elektromagnetischen Randbedingungen hauptsächlich im Antennenspalt lokalisiert. Bei anti-symmetrischen Moden verstärkt die Coulombanziehung die Landungsträgerdichte in der Nähe des Spalts und es treten verstärkte optische Nahfelder zwischen den zwei Antennenarmen auf. Die Coulombwechselwirkung nimmt mit kleiner werdendem Abstand zu und für Strukturen mit sehr kleinem Abstand ist eine sehr große Feldverstärkung und eine sehr starke Lokalisation zu erwarten. In dieser Dissertation wurden optische Antennen untersucht, deren zwei Antennenarme durch einen extrem schmalen Spalt in der Größenordnung von interatomaren Abständen getrennt sind. Eigenmoden der Antennen werden durch zwei fundamental verschiedene Mechanismen anregt: Entweder durch optische Anregung oder durch das Anlegen einer elektrischen Gleichspannung. Bei der zweiten Methode wird der quantenmechanische Elektron-Tunnelprozess ausgenutzt. Zu Beginn dieser Arbeit existierten nur wenige Studien über Antennen mit sehr kleinen Spaltbreiten und es war nicht bekannt ob optische Felder auf atomarer Skala lokalisiert und verstärkt werden können. Allerdings ist eine direkte Messung der Feldlokalisation und Feldverstärkung auf atomarer Skala nicht möglich, da eine Unterscheidung zwischen Quelle, Probe und Detektor aufgrund deren gegenseitigen Wechselwirkungen schwierig ist. In dieser Arbeit wurde jedoch ein eleganter Ansatz entwickelt um dieses Problem zu umgehen. Dieser Ansatz nutzt aus, dass die energetische Aufspaltung eines hybridisierten Modenpaares, bestehend aus einer symmetrischen und anti-symmetrischen Mode, proportional zur Coulombwechselwirkung zwischen den Antennenarmen ist. Die Coulombwechselwirkung skaliert mit der Spaltbreite und somit gibt die energetische Aufspaltung der beiden Moden sehr genau den Abstand zwischen den zwei Antennenarmen wieder. Die untersuchten Strukturen waren zwei längsseitig-parallel liegende Nanostäbchen mit einem Abstand von 2 bis weniger als 0,5 nm. Diese Antennen konnten auf einfache Weise durch Selbstorganisation erhalten werden. Ein weiterer Grund für die Verwendung dieser Strukturen lag darin, dass bei ihnen symmetrische und anti-symmetrische Moden im sichtbaren Spektralbereich liegen. Um optische Moden jeglicher Symmetrie anregen zu können wurde in dieser Arbeit ein neuartiger experimenteller Aufbau zur Messung von Streuspektren entwickelt und erfolgreich eingesetzt. Sorgfältige Analysen der optischen Spektren und Vergleiche mit numerischen Rechnungen legen nahe, dass hohe Feldverstärkungen und Lokalisationen selbst für Strukturen mit Spaltbreiten von nur 0,5 nm auftreten. Möglicherweise erreichen die untersuchten Antennen die maximal möglichen Feldverstärkungen, denn für kleinere Abstände werden Plasmonenresonanzen durch elektronische Tunnelprozesse und nicht-lokale Effekte der dielektrischen Funktion geschwächt. Die lokalisierten und verstärkten optischen Felder, die durch Antennen mit Spaltbreiten auf der Skala von atomaren Abständen erreicht werden können, eignen sich hervorragend für eine Verstärkung von Licht-Materie-Wechselwirkungen. Für opto-elektronische Anwendungen ist hierbei das Wechselspiel zwischen Feldern mit optischen Frequenzen und statischen elektrischen Feldern oder Strömen von großem Interesse. In dieser Arbeit wurde ein Konzept erarbeitet, welches es ermöglicht optische Antennen elektrisch zu kontaktieren. Dieses Konzept wurde zunächst an Antennen mit circa 25 nm breiten Spalten mithilfe von numerischen Berechnungen verifiziert. Es konnte gezeigt werden, dass durch die Kontaktierung an den Positionen der Feldminima die Eigenmoden der Antenne nahezu unverändert bleiben. So liegen die Resonanzen der kontaktierten Antennen bei nahezu den gleichen Wellenlängen wie bei der unkontaktierten Antennen und die berechneten Feldverstärkungen sind mit einem Wert von 1000 nur minimal kleiner. Die Strukturen wurden aus einkristallinem Gold hergestellt und besitzen sehr gute optische und elektrische Eigenschaften. Beispielsweise ist die elektrische Leitfähigkeit viermal größer als bei multikristallinen Strukturen. Der elektrische Widerstand der Spalte ist circa 1 TOhm und elektrische Felder mit einer Stärke von mindestens 10^8 V/m können dauerhaft angelegt werden, ohne die Strukturen zu beschädigen. Mithilfe von Weißlicht-Streuexperimenten wurden die optischen Eigenschaften der hergestellten Strukturen untersucht. Die gemessenen Spektren zeigen wohl definierte Plasmonenresonanzen, deren Resonanzwellenlänge durch die Antennenlänge bestimmt ist. Somit konnte das Konzept auch experimentell bestätigt werden. Durch Kombination von Spalten in der Größenordnung von atomaren Abständen mit elektrisch kontaktierten Antennen konnte eine Lichtquelle mit Abmessungen kleiner als die Lichtwellenlänge realisiert werden. Die Lichtquelle basiert auf einem neuartigen Mechanismus bei dem Photonen durch elektrisches Treiben der Antenne generiert werden. Die hierzu benötigten Felder mit optischen Frequenzen werden durch statistische Fluktuationen des quantenmechanischen Tunnelstromes bereitgestellt. Somit findet die Lichterzeugung und -kontrolle in einer planaren Nanostruktur statt, die nur aus einem einzelnen Material besteht. Um einen Tunnelkontakt zwischen den elektrisch kontaktierten Antennenarmen zu erreichen, wurden Goldnanopartikel mithilfe eines Rasterkraftmikroskops in dem Antennenspalt platziert. Zwischen dem Goldpartikel und mindestens einem der Antennenarmen bildet sich dabei ein stabiler Tunnelkontakt, dessen Existenz durch die reproduzierbare Messung der charakteristischen Strom-Spannungskennlinie bewiesen werden konnte. Durch Anlegung einer konstanten Spannung kommt es zu inelastischen Tunnelprozessen bei denen Photonen erzeugt werden. Dabei wird die erhöhte optische Zustandsdichte der Antenne ausgenutzt, so dass das abgestrahlte Licht eine Polarisation entlang der Antennenachse zeigt und die räumliche Abstrahlcharakteristik durch die dipolartige Antennenmode bestimmt ist. Durch Variation der Antennengeometrie und durch Vergleich mit Streuspektren konnte gezeigt werden, dass die Wellenlänge des elektrisch erzeugten Lichts durch die Antennengeometrie bestimmt ist. Der Vergleich mit einer nicht-resonanten Referenzstruktur zeigt, dass die Antenne die Effizienz des Lichterzeugungsprozesses um zwei Größenordnungen erhöht. Die in dieser Arbeit entwickelten Methoden zur kontrollierten Herstellung ein\-kris\-talliner Nanoantennen mit Spaltbreiten auf der Skala von atomaren Abständen erweitern die Grenzen der Nanotechnologie. Darüber hinaus konnte gezeigt werden, dass lokalisierte und verstärkte optische Felder auf atomarer Skala existieren können und es wurde mit einer Gleichspannung mithilfe des inelastischen Tunnelprozesses Licht erzeugt. Diese Studien eröffnen vielfältige Möglichkeiten sowohl für Grundlagenforschung als auch praktische Anwendungen. Die Lokalisation von optischen Feldern auf der (sub)-nanometer Skala ist die Voraussetzung für optische Spektroskopie nahe an der atomaren Auflösung. So konnte kürzlich in einem wegweisenden optischen Experiment molekulare Auflösung durch Messung von plasmonen verstärkter Ramanstreuung gezeigt werden. Das kleine Modenvolumen von Antennen mit Spaltbreiten in der Größenordnung atomarer Abstände kann zu einer Licht-Materie-Wechselwirkung im Bereich der starken Kopplung führen. Dies hätte zur Folge, dass Quanten-Elektro-Dynamische Effekte wie Rabi-Aufspaltung oder -Oszillationen in Zukunft bei Experimenten, in denen einzelne Lichtemitter in sehr schmale Antennenspalte platziert sind, beobachtet werden können. Es ist zu erwarten, dass elektrisch kontaktierte optische Antennen zukünftig in dem neuen Forschungsgebiet der Elektro-Plasmonik eingesetzt werden. Die entwickelte Subwellenlängen-Lichtquelle ist von großem Interesse für zukünftige plasmonische Nano-Schaltkreise. Es ist vorstellbar, dass optische Signale in solchen Schaltkreisen mit sehr hoher Geschwindigkeit auf der Nanoskala manipuliert werden und anschließend wieder in elektrische Signale umgewandelt werden können. Des Weiteren wäre es möglich einen optischen Transistor, basierend auf einer kontaktierten Antenne, zu integrieren. Die Schaltung des Transistors könnte durch den photon-unterstützten Tunneleffekt erreicht werden. Ein weiteres interessantes Experiment in naher Zukunft wäre die Übertragung der fermionischen Eigenschaften von Elektronen auf Photonen, um eine elektrisch-getriebene Einzelphotonen-Quelle zu erhalten. Solch eine nicht-klassische Lichtquelle könnte aus elektrisch kontaktierten Antennen hergestellt werden und besäße das Potential zur Integration in Schaltkreise für Quantenkommunikations-Anwendungen. Ein Ansatz dafür wäre die Positionierung von Einzelemittern in den Antennenspalt. Ein anderer Ansatz könnte auf Einzel-Elektronen-Tunnelprozessen basieren, wie sie in Einkanal-Quantenpunktkontakten oder aufgrund des Coulombblockade-Effektes stattfinden. KW - Nanooptik KW - Nanostruktur KW - near-field optics KW - Nahfeld Optik KW - nanoantenna KW - atomic-scale gap KW - electrical excitation KW - plasmonics KW - electron tunneling KW - Nanoantenne KW - atomar kleine Lücke KW - elektrische Anregung KW - Elektronen Tunneln KW - Antenne KW - Nahfeldoptik KW - Plasmon Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-115492 ER - TY - JOUR A1 - Bareille, C. A1 - Fortuna, F. A1 - Rödel, T. C. A1 - Bertran, F. A1 - Gabay, M. A1 - Hijano Cubelos, O. A1 - Taleb-Ibrahimi, A. A1 - Le Fèvre, P. A1 - Bibes, M. A1 - Barthelemy, A. A1 - Maroutian, T. A1 - Lecoeur, P. A1 - Rozenberg, M. J. A1 - Santander-Syro, A. F. T1 - Two-dimensional electron gas with six-fold symmetry at the (111) surface of KTaO3 JF - Scientific Reports N2 - Two-dimensional electron gases (2DEGs) at transition-metal oxide (TMO) interfaces, and boundary states in topological insulators, are being intensively investigated. The former system harbors superconductivity, large magneto-resistance, and ferromagnetism. In the latter, honeycomb-lattice geometry plus bulk spin-orbit interactions lead to topologically protected spin-polarized bands. 2DEGs in TMOs with a honeycomb-like structure could yield new states of matter, but they had not been experimentally realized, yet. We successfully created a 2DEG at the (111) surface of KTaO3, a strong insulator with large spin-orbit coupling. Its confined states form a network of weakly-dispersing electronic gutters with 6-fold symmetry, a topology novel to all known oxide-based 2DEGs. If those pertain to just one Ta-(111) bilayer, model calculations predict that it can be a topological metal. Our findings demonstrate that completely new electronic states, with symmetries not realized in the bulk, can be tailored in oxide surfaces, promising for TMO-based devices. KW - LAALO3/SRTIO3 interfaces KW - topological insulators KW - superconductivity KW - oxides KW - SRTIO3 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-117703 SN - 2045-2322 VL - 4 ER - TY - THES A1 - Zusan, Andreas T1 - The Effect of Morphology on the Photocurrent Generation in Organic Solar Cells T1 - Der Einfluss der Morphologie auf die Generierung von Photostrom in organischen Solarzellen N2 - Organic solar cells have great potential to become a low-cost and clean alternative to conventional photovoltaic technologies based on the inorganic bulk material silicon. As a highly promising concept in the field of organic photovoltaics, bulk heterojunction (BHJ) solar cells consist of a mixture of an electron donating and an electron withdrawing component. Their degree of intermixing crucially affects the generation of photocurrent. In this work, the effect of an altered blend morphology on polaron pair dissociation, charge carrier transport, and nongeminate recombination is analyzed by the charge extraction techniques time delayed collection field (TDCF) and open circuit corrected transient charge extraction (OTRACE). Different comparative studies cover a broad range of material systems, including polymer and small-molecule donors in combination with different fullerene acceptors. The field dependence of polaron pair dissociation is analyzed in blends based on the polymer pBTTT-C16, allowing a systematic tuning of the blend morphology by varying the acceptor type and fraction. The effect of both excess photon energy and intercalated phases are minor compared to the influence of excess fullerene, which reduces the field dependence of photogeneration. The study demonstrates that the presence of neat fullerene domains is the major driving force for efficient polaron pair dissociation that is linked to the delocalization of charge carriers. Furthermore, the influence of the processing additive diiodooctane (DIO) is analyzed using the photovoltaic blends PBDTTT-C:PC71BM and PTB7:PC71BM. The study reveals amulti-tiered alteration of the blend morphology of PBDTTT-C based blends upon a systematic increase of the amount of DIO. Domains on the hundred nanometers length scale in the DIO-free blend are identified as neat fullerene agglomerates embedded in an intermixed matrix. With the addition of the additive, 0.6% and 1% DIO already substantially reduces the size of these domains until reaching the optimum 3% DIO mixture, where a 7.1% power conversion efficiency is obtained. It is brought into connection with the formation of interpenetrating polymer and fullerene phases. Similar to PBDTTT-C, the morphology of DIO-free PTB7:PC71BM blends is characterized by large fullerene domains being decreased in size upon the addition of 3% DIO. OTRACE measurements reveal a reduced Langevin-type, super-second order recombination in both blends. It is demonstrated that the deviation from bimolecular recombination kinetics cannot be fully attributed to the carrier density dependence of the mobility but is rather related to trapping in segregated PC71BM domains. Finally, with regard to small-molecule donors, a higher yield of photogeneration and balanced transport properties are identified as the dominant factors enhancing the efficiency of vacuum deposited MD376:C60 relative to its solution processed counterpart MD376:PC61BM. The finding is explained by a higher degree of dimerization of the merocyanine dye MD376 and a stronger donor-acceptor interaction at the interface in the case of the vacuum deposited blend. N2 - Organische Solarzellen sind dank der Möglichkeit einer preisgünstigen und umweltfreundlichen Herstellung eine erfolgversprechende Alternative zu konventionellen Photovoltaiktechnologien, bei denen heutzutage hauptsächlich Silizium zum Einsatz kommt. Ein aussichtsreiches Konzept ist dabei die Heterogemisch (bulk heterojunction , BHJ)-Solarzelle. Deren aktive Schicht besteht aus einer Elektron-gebenden und einer Elektron-entziehenden Komponente, wobei die Generierung von Photostrom entscheidend von der Durchmischung beider Materialien abhängt. Dieser Einfluss der Morphologie auf die Trennung von Polaronpaaren, den Transport von freien Ladungsträgern und deren nichtgeminale Rekombination wird durch die Verwendung der Ladungsextraktionsmethoden time delayed collection field (TDCF) sowie open circuit corrected transient charge extraction (OTRACE) in dieser Arbeit im Detail untersucht. Die vorgestellten Studien umfassen mit Polymeren und kleinen Molekülen als Donatoren sowie verschiedenen Fulleren-Akzeptoren unterschiedlichste Materialsysteme. Der erste Teil der Arbeit befasst sich mit der feldabhängigen Trennung von Polaronpaaren in Solarzellen, die unter Verwendung des Polymers pBTTT-C16 hergestellt werden. Das Materialsystem erlaubt eine systematische Anpassung der Morphologie durch Art und Anteil des Akzeptors. Die Untersuchungen zeigen, dass sowohl Überschussenergie als auch interkalierte Phasen lediglich eine geringe Auswirkung auf die Photogenerierung haben, diese jedoch stark von der Fullerenmenge im Gemisch beeinflusst wird. Das Ergebnis verdeutlicht, dass reine Fullerendomänen die treibende Kraft für eine effiziente Trennung von Polaronpaaren sind, was mit der Delokalisierung von Ladungsträgern verknüpft wird. Im zweiten Teil wird der Einfluss des Additivs Diiodooktan (DIO) auf das Materialsystem PBDTTT-C:PC71BM untersucht. Die Studie zeigt eine mehrstufige Änderung der Morphologie bei einer schrittweisen Erhöhung der verwendeten DIO Menge. Wird das Heterogemisch PBDTTT-C:PC71BM ohne DIO hergestellt, ist dessen Nanostruktur durch große Agglomerate geprägt, die als reine Fullerendomänen identifiziert werden. Bereits die Verwendung von 0.6% und 1% DIO führt zu einer deutlichen Verkleinerung dieser Domänen, wobei erst die maximale Effizienz der mit 3% DIO hergestellten Solarzelle mit der Ausbildung von vernetzten Polymer- und Fullerenphasen in Verbindung gebracht wird. Vergleichbar zu PBDTTT-C weist auch PTB7:PC71BM große Fullerendomänen und deren bessere Dispersion durch die Verwendung von 3% DIO auf. In beiden Fällen zeigt OTRACE eine reduzierte Langevin-artige Rekombination sowie die Abweichung von einem bimolekularen Verhalten. Da diese erhöhte Rekombinationsordnung nicht mit der Ladungsträgerdichtenabhängigkeit der Mobilität erklärt werden kann, wird sie dem Einfangen von Ladungsträgern in Fullerendomänen zugeordnet. Im letzten Teil wird gezeigt, dass eine ergiebigere Photogenerierung sowie ausgeglichene Transporteigenschaften eine erhöhte Bauteileffizienz von aufgedampften MD376:C60 Solarzellen im Vergleich zum flüssigprozessierten Pendant MD376:PC61BM bedingen. Die Beobachtung wird mit einer verbesserten Dimerisation des Merocyanins MD376 und einer stärkeren Donator-Akzeptor-Wechselwirkung an der Grenzfläche erklärt. KW - Organische Solarzelle KW - Photostrom KW - Ladungsträgergenerierung KW - geminale Rekombination KW - nichtgeminale Rekombination KW - Elektronentransport KW - Photovoltaik KW - Rekombination Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-117852 ER - TY - JOUR A1 - Biller, Armin A1 - Choli, Morwan A1 - Blaimer, Martin A1 - Breuer, Felix A. A1 - Jakob, Peter M. A1 - Bartsch, Andreas J. T1 - Combined Acquisition Technique (CAT) for Neuroimaging of Multiple Sclerosis at Low Specific Absorption Rates (SAR) JF - PLOS ONE N2 - Purpose: To compare a novel combined acquisition technique (CAT) of turbo-spin-echo (TSE) and echo-planar-imaging (EPI) with conventional TSE. CAT reduces the electromagnetic energy load transmitted for spin excitation. This radiofrequency (RF) burden is limited by the specific absorption rate (SAR) for patient safety. SAR limits restrict high-field MRI applications, in particular. Material and Methods: The study was approved by the local Medical Ethics Committee. Written informed consent was obtained from all participants. T2- and PD-weighted brain images of n = 40 Multiple Sclerosis (MS) patients were acquired by CAT and TSE at 3 Tesla. Lesions were recorded by two blinded, board-certificated neuroradiologists. Diagnostic equivalence of CAT and TSE to detect MS lesions was evaluated along with their SAR, sound pressure level (SPL) and sensations of acoustic noise, heating, vibration and peripheral nerve stimulation. Results: Every MS lesion revealed on TSE was detected by CAT according to both raters (Cohen's kappa of within-rater/across-CAT/TSE lesion detection kappa(CAT) = 1.00, at an inter-rater lesion detection agreement of kappa(LES) = 0.82). CAT reduced the SAR burden significantly compared to TSE (p<0.001). Mean SAR differences between TSE and CAT were 29.0 (+/- 5.7) % for the T2-contrast and 32.7 (+/- 21.9) % for the PD-contrast (expressed as percentages of the effective SAR limit of 3.2 W/kg for head examinations). Average SPL of CAT was no louder than during TSE. Sensations of CAT-vs. TSE-induced heating, noise and scanning vibrations did not differ. Conclusion: T2-/PD-CAT is diagnostically equivalent to TSE for MS lesion detection yet substantially reduces the RF exposure. Such SAR reduction facilitates high-field MRI applications at 3 Tesla or above and corresponding protocol standardizations but CAT can also be used to scan faster, at higher resolution or with more slices. According to our data, CAT is no more uncomfortable than TSE scanning. KW - registration KW - clinically isolated syndromes KW - brain images KW - MRI criteria KW - robust KW - optimization Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-117179 SN - 1932-6203 VL - 9 IS - 3 ER - TY - JOUR A1 - Kümmel, Reiner A1 - Lindenberger, Dietmar T1 - How energy conversion drives economic growth far from the equilibrium of neoclassical economics JF - New Journal of Physics N2 - Energy conversion in the machines and information processors of the capital stock drives the growth of modern economies. This is exemplified for Germany, Japan, and the USA during the second half of the 20th century: econometric analyses reveal that the output elasticity, i.e. the economic weight, of energy is much larger than energyʼs share in total factor cost, while for labor just the opposite is true. This is at variance with mainstream economic theory according to which an economy should operate in the neoclassical equilibrium, where output elasticities equal factor cost shares. The standard derivation of the neoclassical equilibrium from the maximization of profit or of time-integrated utility disregards technological constraints. We show that the inclusion of these constraints in our nonlinear-optimization calculus results in equilibrium conditions, where generalized shadow prices destroy the equality of output elasticities and cost shares. Consequently, at the prices of capital, labor, and energy we have known so far, industrial economies have evolved far from the neoclassical equilibrium. This is illustrated by the example of the German industrial sector evolving on the mountain of factor costs before and during the first and the second oil price explosion. It indicates the influence of the 'virtually binding' technological constraints on entrepreneurial decisions, and the existence of 'soft constraints' as well. Implications for employment and future economic growth are discussed. KW - economic growth KW - technological constraints KW - output elasticities KW - energy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-118102 SN - 1367-2630 VL - 16 IS - 125008 ER - TY - JOUR A1 - Schwender, Joerg A1 - Koenig, Christina A1 - Klapperstueck, Matthias A1 - Heinzel, Nicolas A1 - Munz, Eberhard A1 - Hebbelmann, Inga A1 - Hay, Jordan O. A1 - Denolf, Peter A1 - De Bodt, Stefanie A1 - Redestig, Henning A1 - Caestecker, Evelyne A1 - Jakob, Peter M. A1 - Borisjuk, Ljudmilla A1 - Rolletschek, Hardy T1 - Transcript abundance on its own cannot be used to infer fluxes in central metabolism JF - Frontiers in Plant Science N2 - An attempt has been made to define the extent to which metabolic flux in central plant metabolism is reflected by changes in the transcriptome and metabolome, based on an analysis of in vitro cultured immature embryos of two oilseed rape (Brassica napus) accessions which contrast for seed lipid accumulation. Metabolic flux analysis (MFA) was used to constrain a flux balance metabolic model which included 671 biochemical and transport reactions within the central metabolism. This highly confident flux information was eventually used for comparative analysis of flux vs. transcript (metabolite). Metabolite profiling succeeded in identifying 79 intermediates within the central metabolism, some of which differed quantitatively between the two accessions and displayed a significant shift corresponding to flux. An RNA-Seq based transcriptome analysis revealed a large number of genes which were differentially transcribed in the two accessions, including some enzymes/proteins active in major metabolic pathways. With a few exceptions, differential activity in the major pathways (glycolysis, TCA cycle, amino acid, and fatty acid synthesis) was not reflected in contrasting abundances of the relevant transcripts. The conclusion was that transcript abundance on its own cannot be used to infer metabolic activity/fluxes in central plant metabolism. This limitation needs to be borne in mind in evaluating transcriptome data and designing metabolic engineering experiments. KW - oilseeds KW - lipid biosynthesis KW - heterotrophic arabidopsis cells KW - central carbon metabolism KW - gene-expression data KW - targeted metabolite profiling KW - central metabolism KW - flux balance analysis KW - C-13-metabolic flux analysis KW - Brassica napus KW - RNA-SEQ KW - developing oilseeds KW - saccharomyces cerevisiae KW - maize kernels KW - embryo KW - seed Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114586 SN - 1664-462X N1 - Funding information: Bayer Crop Science NV; Deutsche Forschungsgemeinschaft [BO-1917/4-1]; U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division [DEACO298CH10886] VL - 5 ER - TY - JOUR A1 - Dauth, M. A1 - Wiessner, M. A1 - Feyer, V. A1 - Schöll, A. A1 - Puschnig, P. A1 - Reinert, F. A1 - Kuemmel, S. T1 - Angle resolved photoemission from organic semiconductors: orbital imaging beyond the molecular orbital interpretation JF - New Journal of Physics N2 - Fascinating pictures that can be interpreted as showing molecular orbitals have been obtained with various imaging techniques. Among these, angle resolved photoemission spectroscopy (ARPES) has emerged as a particularly powerful method. Orbital images have been used to underline the physical credibility of the molecular orbital concept. However, from the theory of the photoemission process it is evident that imaging experiments do not show molecular orbitals, but Dyson orbitals. The latter are not eigenstates of a single-particle Hamiltonian and thus do not fit into the usual simple interpretation of electronic structure in terms of molecular orbitals. In a combined theoretical and experimental study we thus check whether a Dyson-orbital and a molecular-orbital based interpretation of ARPES lead to differences that are relevant on the experimentally observable scale. We discuss a scheme that allows for approximately calculating Dyson orbitals with moderate computational effort. Electronic relaxation is taken into account explicitly. The comparison reveals that while molecular orbitals are frequently good approximations to Dyson orbitals, a detailed understanding of photoemission intensities may require one to go beyond the molecular orbital picture. In particular we clearly observe signatures of the Dyson-orbital character for an adsorbed semiconductor molecule in ARPES spectra when these are recorded over a larger momentum range than in earlier experiments. KW - Dyson orbitals KW - electronic structure KW - PTCDA KW - AG(110) KW - density-functional theory KW - approximation KW - energies KW - monolayers KW - spectroscopy KW - NTCDA KW - ARPES KW - orbital imaging KW - photoemission spectroscopy Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-115180 SN - 1367-2630 VL - 16 ER - TY - THES A1 - El-Kareh, Lydia T1 - Rashba-type spin-split surface states: Heavy post transition metals on Ag(111) T1 - Rashba aufgespaltene Oberflächenzustände schwerer Hauptgruppenmetalle auf Ag(111) N2 - In the framework of this thesis, the structural and electronic properties of bismuth and lead deposited on Ag(111) have been investigated by means of low-temperature scanning tunneling microscopy (LT-STM) and spectroscopy (STS). Prior to spectroscopic investigations the growth characteristics have been investigated by means of STM and low energy electron diffraction (LEED) measurements. Submonolayer coverages as well as thick films have been investigated for both systems. Subsequently the quantum well characteristics of thick Pb films on Ag(111) have been analyzed and the quantum well character could be proved up to layer thicknesses of N ≈ 100 ML. The observed characteristics in STS spectra were explained by a simple cosine Taylor expansion and an in-plane energy dispersion could be detected by means of quasi-particle interferences. The main part of this work investigates the giant Rashba-type spin-split surface alloys of (√3 × √3)Pb/Ag(111)R30◦ and (√3 × √3)Bi/Ag(111)R30◦. With STS experiments the band positions and splitting strengths of the unoccupied (√3 × √3)Pb/Ag(111)R30◦ band dispersions could be resolved, which were unclear so far. The investigation by means of quasi-particle interferences resulted in the observation of several scattering events, which could be assigned as intra- and inter-band transitions. The analysis of scattering channels within a simple spin-conservation–approach turned out to be incomplete and led to contradictions between experiment and theory. In this framework more sophisticated DFT calculations could resolve the apparent deviations by a complete treatment of scattering in spin-orbit–coupled materials, which allows for constructive interferences in spin-flip scattering processes as long as the total momentum J_ is conserved. In a similar way the band dispersion of (√3 × √3)Bi/Ag(111)R30◦ was investigated. The STS spectra confirmed a hybridization gap opening between both Rashba-split bands and several intra- and inter-band scattering events could be observed in the complete energy range. The analysis within a spin-conservation–approach again turned out to be insufficient for explaining the observed scattering events in spin-orbit–coupled materials, which was confi by DFT calculations. Within these calculations an inter-band scattering event that has been identified as spin-conserving in the simple model could be assigned as a spin-flip scattering channel. This illustrates evidently how an incomplete description can lead to completely different indications. The present work shows that different spectroscopic STM modes are able to shed light on Rashba-split surface states. Whereas STS allowed to determine band onsets and splitting strengths, quasi-particle interferences could shed light on the band dispersions. A very important finding of this work is that spin-flip scattering events may result in constructive interferences, an eff which has so far been overlooked in related publications. Additionally it has been found that STM measurements can not distinguish between spin-conserving scattering events or spin-flip scattering events, which prevents to give a definite conclusion on the spin polarization for systems with mixed orbital symmetries just from the observed scattering events. N2 - Im Rahmen dieser Arbeit wurden die strukturellen und elektronischen Eigenschaften von Bismut und Blei bedampften Ag(111) Oberflächen mittels Tieftemperatur-Rastertunnelmi- kroskopie und -spektroskopie untersucht. Im Vorfeld zur Untersuchung der elektronischen Struktur wurde das Wachstumsverhalten sowohl von Bismut als auch Blei auf Ag(111) für Submonolagen und dicke Filme untersucht. Als komplementäre Messmethode wurden hierbei auch LEED Messungen herangezogen. Im Anschluss an die strukturellen Untersuchungen wurden die elektronischen Eigenschaften von dicken Bleifilmen auf Ag(111) untersucht. Der Quantentrogcharakter konnte hier- bei deutlich für sehr dicke Filme von bis zu 100 Monolagen nachgewiesen werden. Die beobachteten STS Spektren wurden im Rahmen einer Cosinus-Taylorentwicklung erläutert und erklärt. Eine Dispersion parallel zur Oberfläche konnte mittels Quasiteilcheninterferenz nachgewiesen werden. Der Hauptteil dieser Arbeit beschäftigte sich mit den Legierungsoberflächen der (√3 × √3)Pb/Ag(111)R30◦ und (√3 × √3)Bi/Ag(111)R30◦ Strukturen, welche über eine außer- gewöhnlich starke Rashba Aufspaltung verfügen. Zunächst wurde die Bandstruktur der (√3 × √3)Pb/Ag(111)R30◦ Oberfläche aufgeklärt, welche aufgrund ihrer energetischen Lage weit oberhalb des Ferminiveaus für ARPES Messungen nicht zugänglich ist und darum bisher ungeklärt blieb. Zur Untersuchung der Banddispersionen wurden Quasiteilcheninterferenzexperimente durchgeführt, durch die mehrere Intra- und Interbandstreuprozesse identifiziert werden konnten. Die Analyse der Streuprozesse hinsichtlich der Spinpolarisationen der beteiligten Bänder in einem einfachen spinerhaltenden Ansatz führte zu einem Widerspruch zwischen experimentell beobachteten Streuprozessen und theoretisch vorhergesagten Spinpolarisationen. In diesem Zusam- menhang konnten neue DFT Rechnungen, die einen vollständigeren Ansatz verfolgten, zeigen, dass dieser Widerspruch gelöst werden konnte, indem anstelle eines spinerhaltenden Ansatzes die Erhaltung des Gesamtdrehimpulses J_ gefordert wurde. Anschließend wurde die Banddispersion der isostrukturellen (√3 × √3)Bi/Ag(111)R30◦- Oberfläche in ähnlicher Weise untersucht. Die STS-Daten bestätigten die Existenz einer Hybridisierungslücke zwischen den beiden Rashba-aufgespaltenen spz und px, py Bändern. Die im gesamten Energiebereich der Bänder beobachteten Intra- und Interbandübergänge konnten ähnlich zur Untersuchung auf der (√3 × √3)Pb/Ag(111)R30◦ nicht im Rahmen eines spinerhaltenden Ansatz zufriedenstellend erklärt werden, sondern nur unter Erhaltung des Gesamdtrehimpulses J_. Es konnte sogar gezeigt werden, dass ein Interbandübergang, der im vereinfachten Modell als spinerhaltend identifziert wurde, in der vollständigeren Betrachtung einem Spinflipstreuereignis zugeordnet werden konnte. Dies zeigt deutlich, dass eine unvollständige Betrachtung mitunter zu völlig verschiedenen Interpretationen führen kann. Die vorliegende Arbeit konnte zeigen, dass es möglich ist Rashba-aufgespaltene Oberflächen mittels verschiedener spektroskopischer STM Messmodi zu untersuchen. Punktspektren erlauben aufgrund des charakteristischen Signals eines Rashba-aufgespaltenen Zustandes Aussagen über Bandmaxima und Aufspaltungen zu ermitteln. In günstigen Fällen ist es mittels Quasiteilcheninterferenz möglich die unverschobenen Banddispersionen abzubilden. Die Interpretation von Quasiteilcheninterferenzen wurde bisher stets im einfachen spiner- haltenden Bild durchgeführt und in diesem Zusammenhang ist ein sehr wichtiger Aspekt dieser Arbeit die Erkenntnis, dass auch Spinflip-Streuungen zu konstruktiven Interferenzen führen können. Zusätzlich wurde herausgefunden, dass es mittels Quasiteilcheninterferenz nicht möglich ist zu unterscheiden, ob der zugrunde liegende Streuvorgang einem spin- erhaltenden oder Spinflip-Übergang zuzuordnen ist. Diese Tatsache verhindert, dass in Systemen mit gemischter orbitaler Symmetrie sichere Aussagen über Spinpolarisationen anhand der experimentell beobachteten Streuereignisse getroffen werden können. KW - Silber KW - Kristallfläche KW - Bismut KW - Blei KW - scanning tunneling microscopy KW - electronic structure KW - spin-orbit coupling KW - Rashba effect KW - Dünne Schicht KW - Elektronische Eigenschaft KW - Rastertunnelmikroskop KW - Elektronenstruktur KW - Spin-Bahn-Wechselwirkung KW - Rashba-Effekt Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112722 ER - TY - JOUR A1 - Brixner, Tobias A1 - Pawłowska, Monika A1 - Goetz, Sebastian A1 - Dreher, Christian A1 - Wurdack, Matthias A1 - Krauss, Enno A1 - Razinskas, Gary A1 - Geisler, Peter A1 - Hecht, Bert T1 - Shaping and spatiotemporal characterization of sub-10-fs pulses focused by a high-NA objective N2 - We describe a setup consisting of a 4 f pulse shaper and a microscope with a high-NA objective lens and discuss the spects most relevant for an undistorted spatiotemporal profile of the focused beam. We demonstrate shaper-assisted pulse compression in focus to a sub-10-fs duration using phase-resolved interferometric spectral modulation (PRISM). We introduce a nanostructure-based method for sub-diffraction spatiotemporal characterization of strongly focused pulses. The distortions caused by optical aberrations and space–time coupling from the shaper can be reduced by careful setup design and alignment to about 10 nm in space and 1 fs in time. KW - Interference microscopy KW - Scanning microscopy KW - Subwavelength structures KW - nanostructures KW - Pulse shaping KW - Ultrafast measurements Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-111120 ER - TY - JOUR A1 - El-Kareh, Lydia A1 - Bihlmayer, Gustav A1 - Buchter, Arne A1 - Bentmann, Hendrik A1 - Blügel, Stefan A1 - Reinert, Friedrich A1 - Bode, Matthias T1 - A combined experimental and theoretical study of Rashba-split surface states on the ( √3x√3) Pb/Ag (111)R30° surface N2 - We report on a combined low-temperature scanning tunneling spectroscopy (STS), angle-resolved photoemission spectroscopy (ARPES), and density functional theory (DFT) investigation of the ( √3x√3) Pb/Ag (111)R30° surface alloy which provides a giant Rashba-type spin splitting. With STS we observed spectroscopic features that are assigned to two hole-like Rashba-split bands in the unoccupied energy range. By means of STS and quantum interference mapping we determine the band onsets, splitting strengths, and dispersions for both bands. The unambiguous assignment of scattering vectors is achieved by comparison to ARPES measurements. While intra-band scattering is found for both Rashba bands, inter-band scattering is only observed in the occupied energy range. Spin- and orbitally-resolved band structures were obtained by DFT calculations. Considering the scattering between states of different spin- and orbital character, the apparent deviation between experimentally observed scattering events and the theoretically predicted spin polarization could be resolved. KW - Rashba effect KW - spin–orbit coupling KW - scanning tunneling microscopy KW - angle resolved photo emission spectroscopy KW - density functional theory Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112786 ER - TY - JOUR A1 - Astakhov, Georgy V. A1 - Kraus, Hannes A1 - Soltamov, V. A. A1 - Fuchs, Franziska A1 - Simin, Dimitrij A1 - Sperlich, Andreas A1 - Baranov, P. G. A1 - Dyakonov, Vladimir T1 - Magnetic field and temperature sensing with atomic-scale spin defects in silicon carbide N2 - Quantum systems can provide outstanding performance in various sensing applications, ranging from bioscience to nanotechnology. Atomic-scale defects in silicon carbide are very attractive in this respect because of the technological advantages of this material and favorable optical and radio frequency spectral ranges to control these defects. We identified several, separately addressable spin-3/2 centers in the same silicon carbide crystal, which are immune to nonaxial strain fluctuations. Some of them are characterized by nearly temperature independent axial crystal fields, making these centers very attractive for vector magnetometry. Contrarily, the zero-field splitting of another center exhibits a giant thermal shift of −1.1 MHz/K at room temperature, which can be used for thermometry applications. We also discuss a synchronized composite clock exploiting spin centers with different thermal response. KW - condensed-matter physics KW - quantum physics Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-113025 ER - TY - THES A1 - Henn, Tobias T1 - Hot spin carriers in cold semiconductors : Time and spatially resolved magneto-optical Kerr effect spectroscopy of optically induced electron spin dynamics in semiconductor heterostructures T1 - Heiße Spinträger in kalten Halbleitern N2 - The present thesis “Hot spin carriers in cold semiconductors” investigates hot carrier effects in low-temperature photoinduced magneto-optical Kerr effect (MOKE) microscopy of electron spins in semiconductor heterostructures. Our studies reveal that the influence of hot photocarriers in magneto-optical pump-probe experiments is twofold. First, it is commonly assumed that a measurement of the local Kerr rotation using an arbitrary probe wavelength maps the local electron spin polarization. This is the fundamental assumption that underlies the widely used two-color MOKE microscopy technique. Our continuous-wave (cw) spectroscopy experiments demonstrate that this assumption is not correct. At low lattice temperatures the nonresonant spin excitation by the focused pump laser inevitably leads to a strong heating of the electron system. This heating, in turn, locally modifies the magneto-optical coefficient which links the experimentally observed Kerr rotation to the electron spin polarization. As a consequence, the spin-induced local Kerr rotation is augmented by spin-unrelated changes in the magneto-optical coefficient. A spatially resolved measurement of the Kerr rotation then does not correctly map the electron spin polarization profile. We demonstrate different ways to overcome this limitation and to correctly measure the electron spin profile. For cw spectroscopy we show how the true local electron spin polarization can be obtained from a quantitative analysis of the full excitonic Kerr rotation spectrum. Alternatively, picosecond MOKE microscopy using a spectrally broad probe laser pulse mitigates hot-carrier effects on the magneto-optical spin detection and allows to directly observe the time-resolved expansion of optically excited electron spin packets in real-space. Second, we show that hot photocarriers strongly modify the spin diffusion process. Owing to their high kinetic energy, hot carriers greatly enhance the electron spin diffusion coefficient with respect to the intrinsic value of the undisturbed system. Therefore, for steady-state excitation the spin diffusivity is strongly enhanced close to the pump spot center where hot electrons are present. Similarly, for short delays following pulsed excitation the high initial temperature of the electrons leads to a very fast initial expansion of the spin packet which gradually slows as the electrons cool down to the lattice temperature. While few previous publications have recognized the possible influence of hot carriers on the electron spin transport properties, the present work is the first to directly observe and quantify such hot carrier contributions. We develop models which for steady-state and pulsed excitation quantitatively describe the experimentally observed electron spin diffusion. These models are capable of separating the intrinsic spin diffusivity from the hot electron contribution, and allow to obtain spin transport parameters of the undisturbed system. We perform extensive cw and time-resolved spectroscopy studies of the lattice temperature dependence of the electron spin diffusion in bulk GaAs. Using our models we obtain a consistent set of parameters for the intrinsic temperature dependence of the electron spin diffusion coefficient and spin relaxation time and the hot carrier contributions which quantitatively describes all experimental observations. Our analysis unequivocally demonstrates that we have, as we believe for the first time, arrived at a coherent understanding of photoinduced low-temperature electron spin diffusion in bulk semiconductors. N2 - Die vorliegende Arbeit untersucht den Einfluss heißer Ladungsträger in pump-probe magneto-optischer Kerr-Effekt (MOKE) Tieftemperatur-Mikroskopie-Messungen der optisch induzierten Elektronenspin-Dynamik in Galliumarsenid-basierten Halbleiterheterostrukturen. Die Arbeit zeigt, dass dieser Einfluss von zweierlei Art ist. Der erste Aspekt betrifft die magneto-optische Elektronenspin-Detektion. Es wird gewöhnlich angenommen, dass eine Messung der lokalen Kerr-Rotation unter Verwendung einer beliebigen Probelaser-Wellenlänge korrekt die lokale Elektronenspinpolarisation abbildet. Diese Prämisse ist die fundamentale Grundlage der MOKE Elektronenspin-Mikroskopie. Unsere Dauerstrich-Spektroskopie-Ergebnisse belegen, dass diese Annahme im Allgemeinen nicht korrekt ist. Bei tiefen Gittertemperaturen führt die nichtresonante optische Anregung spinpolarisierter Elektronen zu einer signifikanten Heizung des Elektronensystems. Diese Heizung modifiziert lokal den magneto-optischen Koeffizienten, der die im Experiment beobachtete Kerr-Rotation mit der zu messenden Elektronenspinpolarisation verknüpft. Als Konsequenz ist die spininduzierte lokale Kerr-Rotation von spinunabhängigen Änderungen des der magneto-optischen Koeffizienten überlagert. Eine ortsaufgelöste Messung der Kerr-Rotation bildet dann im Allgemeinen nicht korrekt die lokale Elektronenspinpolarisation ab. Wir demonstrieren verschiedene Möglichkeiten, diese Einschränkung zu überwinden und das korrekte Elektronenspin-Profil zu bestimmen. Für Dauerstrich-Anregung zeigen wir, dass das Elektronenspin-Profil korrekt durch eine quantitative Analyse des lokalen exzitonischen Kerr-Rotations-Spektrums ermittelt werden kann. Alternativ minimiert Pikosekunden-zeitaufgelöste MOKE Mikroskopie unter Verwendung eines spektral breiten gepulsten Probelasers den Einfluss heißer Elektronen auf die magneto-optische Spin-Detektion und erlaubt die direkte Beobachtung der diffusiven Ausbreitung optisch erzeugter Elektronenspin-Pakete im Realraum. Als zweites Hauptergebnis zeigen wir, dass optische angeregte heiße Ladungsträger signifikant die Spindiffusion beeinflussen. Durch ihre hohe kinetischen Energie erhöhen heiße Photoladungsträger stark den Elektronenspin-Diffusionskoeffizienten im Vergleich zum intrinsischen Wert des ungestörten Systems. Aus diesem Grund ist bei tiefen Gittertemperaturen für lokale Dauerstrich-Anregung der Spin-Diffusionskoeffizient in der Nähe des fokussierten Pumplaserstrahls, in der heiße Elektronen vorhanden sind, stark erhöht. Analog führt für kurze Zeiten nach gepulster optischer Anregung die hohe anfängliche Elektronentemperatur zu einer sehr schnellen initialen Ausbreitung des Spin-Paktes, welche sich allmählich verlangsamt, während die Elektronen auf die Gittertemperatur abkühlen. Während einzelne frühere Arbeiten bereits den möglichen Einfluss heißer Ladungsträger auf den Elektronenspin-Transport erkannten, ist die vorliegende Arbeit die erste, die die Wirkung heißer Träger auf die Elektronenspin-Diffusion direkt beobachtet und quantifiziert. Wir entwickeln verschiedene Modelle, die für gepulste und Dauerstrich-Anregung quantitativ die Elektronenspin-Diffusion beschreiben. Diese Modelle sind in der Lage, die intrinsische Spindiffusivität von den Beiträgen heißer Ladungsträger zu trennen und erlauben, die Spintransport-Eigenschaften des ungestörten Systems zu bestimmen. Wir untersuchen in zeitaufgelösten und Dauerstrich-Anregungs-Experimenten die Gittertemperatur-Abhängigkeit der Spindiffusion in n-dotiertem Volumen-GaAs. Mit Hilfe unserer Modelle ermitteln wir einen konsistenten Parameter-Satz für die intrinsische Temperaturabhängigkeit der Spinrelaxationszeit und des Elektronenspin-Diffusionskoeffizienten sowie der Beiträge heißer Ladungsträger, der quantitativ alle experimentellen Beobachtungen beschreibt. Damit haben wir erstmals ein kohärentes Verständnis der optisch induzierten Tieftemperatur-Elektronenspin-Diffusion in Halbleitern entwickelt. KW - Galliumarsenid KW - Optische Spektroskopie KW - Heterostruktur KW - spintronics KW - Spintronik KW - Elektronenspin KW - Halbleiterphysik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-110265 ER - TY - THES A1 - Proppert, Sven Martin T1 - Design, implementation and characterization of a microscope capable of three-dimensional two color super-resolution fluorescence imaging T1 - Design, Implementierung und Charakterisierung eines Mikroskops für dreidimensionale zwei Farben superhochauflösende Fluoreszenz-Bildgebung N2 - This thesis reviews the fundamentals of three-dimensional super-resolution localization imaging. In order to infer the axial coordinate of the emission of single fluorophores, the point spread function is engineered following a technique usually referred to as astigmatic imaging by the introduction of a cylindrical lens to the detection path of a microscope. After giving a short introduction to optics and localization microscopy, I outline sources of aberrations as frequently encountered in 3D-localization microscopy and will discuss their respective impact on the precision and accuracy of the localization process. With the knowledge from these considerations, experiments were designed and conducted to verify the validity of the conclusions and to demonstrate the abilities of the proposed microscope to resolve biological structures in the three spatial dimensions. Additionally, it is demonstrated that measurements of huge volumes with virtually no aberrations is in principle feasible. During the course of this thesis, a new method was introduced for inferring axial coordinates. This interpolation method based on cubic B-splines shows superior performance in the calibration of a microscope and the evaluation of subsequent measurement and will therefore be used and explained in this work. Finally, this work is also meant to give future students some guidance for entering the field of 3D localization microscopy and therefore, detailed protocols are provided covering the specific aspects of two color 3D localization imaging. N2 - In dieser Arbeit werden die Grundlagen der dreidimensionalen hochauflösenden Lokalisationsmikroskopie erarbeitet und daraus Spezifikationen für ein geeignetes Mikroskop abgeleitet. Zur Gewinnung der axialen Koordinate der Emission einzelner Farbstoffe wird die Punktspreizfunktion in der Detektion astigmatisch mithilfe einer zylindrischen Linse verändert. Nach einer kurzen Einleitung in die Grundzüge der Optik und der Lokalisationsmikroskopie werden die Ursachen für typische Aberrationen besprochen, wie sie in der 3D-Lokalisationsmikroskopie häufig auftreten. Weiterhin wird der Einfluss dieser Aberrationen auf die erreichbare Präzision und Exaktheit des Lokalisationsprozesses behandelt. Mit dem Wissen aus diesen Überlegungen wurden Experimente entworfen und durchgeführt um die getroffenen Schlussfolgerungen zu validieren und zu demonstrieren, dass das vorgeschlagene Mikroskop dazu in der Lage ist, biologische Strukturen in den drei räumlichen Dimensionen aufzulösen. Weiterhin wird gezeigt, dass beinahe aberrationsfreie Mikroskopie großer Volumina prinzipiell möglich ist. Während der Arbeit an dieser Promotion wurde eine neue Methode zur Gewinnung der axialen Koordinaten eingeführt. Diese auf kubischen B-splines basierende Interpolationsmethode stellte sich als anderen Routinen überlegen in der Kalibration eines Mikroskops und der anschließenden Auswertung von Messungen heraus. Deshalb wird dieses Verfahren in der vorliegenden Arbeit verwendet und erklärt. Da diese Doktorarbeit auch den Anspruch hat, zukünftigen Studenten den Einstieg in die hochauflösende 3D Mikroskopie zu erleichtern, werden abschließend detaillierte Protokolle für spezifische Aspekte der zwei Farben 3D Lokalisationsmikroskopie zur Verfügung gestellt. KW - Dimension 3 KW - aberration KW - Einzelmolekülmikroskopie KW - single molecule microscopy KW - 3D KW - super-resolution KW - Mikroskopie KW - Hochauflösendes Verfahren KW - Aberration Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-107905 ER - TY - THES A1 - Sauer, Christoph T1 - Accessing molecule-metal and hetero-molecular interfaces with direct and resonant photoelectron spectroscopy T1 - Untersuchung von Molekül/Metall- und heteromolekularen Grenzflächen mittels direkter und resonanter Photoelektronenspektroskopie N2 - This thesis consists of two parts of original experimental work, its evaluation, and in- terpretation. Its final goal is to investigate dynamical charge transfer (CT) at a hetero- molecular interface with resonant photoelectron spectroscopy (RPES). In order to achieve this goal preliminary studies have been necessary. First two hetero-molecular inter- faces that exhibit adequate structural properties as well as an appropriate photoelec- tron spectroscopy (PES) spectrum of the valence regime have been identified. The de- sired CT analysis with RPES of these hetero-molecular systems is then conducted on the basis of the knowledge gained by previous RPES studies of homo-molecular sys- tems. The characterization of hetero-molecular films on single crystal Ag surfaces in the first part of this thesis is performed with high resolution core level PES and valence PES. The reproduction of the core level PES data with reference spectra of homo-molecular films allows me to determine which molecule is in direct contact to the Ag surface and which one is situated in higher layers (not the first one). Due to the direct correspon- dence of core level and valence PES the assignment of features in the spectra of the latter technique can be achieved with the identification of the contributions extracted from the evaluation of the data of the former technique. It is found that the systems PTCDA on one monolayer (ML) of SnPc on Ag(111) and CuPc/1 ML PTCDA/Ag(111) are stable at 300 K which means that no significant layer exchange occurs for these systems. In contrast a vertical exchange of CuPc and PTCDA molecules is observed for PTCDA de- posited on top of 1 ML CuPc/Ag(111). Up to a coverage of approximately 0.5 ML of PTCDA molecules these diffuse into the first layer, replace CuPc molecules, and con- sequently force them into higher layers. Above a coverage of approximately 0.5 ML of PTCDA molecules these are also found in higher layers. The search for a promising system for the intended RPES study then leads to an investigation of hetero-molecular films with a combination of F4TCNQ and PTCDA molecules on Ag(110) within the same approach. Depositing F4TCNQ molecules onto a 1 ML PTCDA/Ag(110) film in the herringbone phase at 300 K results in an instable hetero-organic system which un- dergoes a layer exchange. Hereby PTCDA molecules in the first layer are replaced by F4TCNQ molecules similar to the behavior of the system PTCDA/1 ML CuPc/Ag(111). Switching the order of the preparation steps leads to a stable film of PTCDA/1.0 ML F4TCNQ/Ag(110) at 300 K. Among the stable hetero-molecular films only the system CuPc/1 ML PTCDA/Ag(111) exhibits the required wetting growth of the first two layers at 300 K and a valence PES spectrum with energetically separable molecular orbital signals in the same intensity range. Thus this system is identified to be appropriate for a detailed analysis with RPES. The unexpected findings of vertical exchanges in the hetero-molecular films at 300 K motivate a study of the behavior at elevated temperatures for all systems investigated before. Therein it is revealed that annealing 1.5 ML SnPc/1 ML PTCDA/Ag(111) and 1.0 ML PTCDA/1 ML SnPc/Ag(111) to a temperature above the desorption temperature of molecules not in direct contact to the Ag(111) surface results in a 1 ML SnPc/Ag(111) film in both cases. Hence at elevated temperatures (approximately above 420 K) SnPc molecules replace PTCDA molecules in the first layer on Ag(111). At higher temper- atures (approximately above 470 K) PTCDA molecules and SnPc molecules situated above the first layer then desorb from the 1 ML SnPc/Ag(111) sample. Annealing all hetero-molecular films with CuPc and PTCDA molecules on Ag(111) to 570 K leads to a sample with CuPc and PTCDA molecules in the first and only layer. Depending on the initial CuPc coverage different ratios of both molecules are obtained. With a CuPc coverage of exactly 1 ML, or above, films with PTCDA coverages of approxi- mately 0.1–0.2 ML are produced. So at elevated temperatures CuPc molecules replace PTCDA molecules in the first layer of the system CuPc/1 ML PTCDA/Ag(111). Anal- ogously the layer exchange at 300 K for the system PTCDA/1 ML CuPc/Ag(111) is reversed at elevated temperatures. In the case of SnPc and CuPc coverages below 1 ML annealing vertical hetero-molecular systems with PTCDA on Ag(111) up to 570 K re- sults in a single layer of mixed hetero-molecular films with lateral long range order. In this way the system CuPc + PTCDA/Ag(111) is prepared and then characterized as a proper system for a detailed analysis with RPES. Additional annealing experiments of hetero-organic films consisting of F4TCNQ and PTCDA molecules on Ag(110) with an F4TCNQ coverage of 1.0 ML (and above) end in a submonolayer (sub-ML) film of F4TCNQ/Ag(110) that exhibits a contribution of amorphous carbon. Consequently, it can be concluded that at elevated temperatures part of the F4TCNQ molecules decom- pose. In the second part of this thesis homo-molecular multilayer samples and (sub-)ML films on single crystalline metal surfaces are investigated with RPES in order to enable the final RPES study of vertical and lateral hetero-molecular interface systems. First a pho- ton energy (hν) dependent intensity variation of (groups of) molecular orbital signals of exemplary multilayer films (NTCDA and coronene) is studied and explained on the basis of the local character of the electronic transitions in near edge x-ray absorption fine structure (NEXAFS) spectroscopy in combination with the real space probability den- sity of the contributing molecular orbitals. This simple approach is found to be able to correctly describe relative intensity variations by orders of magnitude while it fails for hν dependent relative intensity changes in the same order of magnitude. After that the hν dependent line-shape evolution of an energetically separated molecular orbital signal of a CuPc multilayer is discussed in relation to small molecules in the gas phase and explained with an effect of electron vibration coupling. Through a comparison of the hν dependent line-shape evolution of the highest occupied molecular orbital (HOMO) of a CuPc with a SnPc multilayer the molecule specific character of this effect is identified. Then the same effect with either two (or more) electronic transitions or multiple coupling vibrational modes is observed for a coronene multilayer. Thereafter the influence of the adsorption on metal surfaces on this effect is studied and discussed with special emphasis on a possible contribution by features which are related to dynamical interface CT. For a sub-ML of SnPc/Au(111) no variation with respect to a SnPc multilayer film is detected while for a sub-ML of CuPc/Au(111) less intensity is distributed into the high binding energy (EB) part of the HOMO signal with respect to the corresponding multilayer film. In the RPES data of a sub-ML of coronene/Ag(111) a resonance specific variation of the hν dependent line-shape evolution of the HOMO signal is found by the revelation of a change of this effect with respect to the coronene multilayer data in only one of the two NEXAFS resonances. All these findings are consistently explained within one effect and a common set of parameters, namely all quantities that characterize the potential energy surfaces involved in the RPES process. Through that an alternative explanation that re- lies on dynamical CT can be excluded which influences the following CT analysis with RPES. Three criteria for such an analysis of dynamical interface CT with RPES are identified. In the system coronene on Ag(111) a low EB feature is related to metal-molecule inter- face CT through the assignment of a particular final state and hence named CT state. In the EB region of the frontier molecular orbital signals of the molecule-metal inter- face systems with a signal from the lowest unoccupied molecular orbital (LUMO) in direct valence PES a broad line-shape is measured in RPES. This finding is related to interface CT by a possible explanation that emerges through the comparison to the line- shape of the CT state. The constant kinetic energy (EK ) features detected for several molecule-metal interfaces constitute the third criterion for a CT analysis with RPES. For the molecule-metal interface systems without a LUMO signal in direct valence PES the energy of these features can be calculated with the assignment of the responsible decay channel in combination with explicitly given simplifying assumptions. Through that the involvement of metal-molecule interface CT in the generation of these constant EK fea- tures is demonstrated. The RPES data of the lateral and the vertical hetero-molecular interface, identified in the first part, is then scanned for these three CT criteria. Thereby neither for the lateral hetero-molecular system CuPc + PTCDA/Ag(111) nor for the verti- cal hetero-molecular system CuPc/1 ML PTCDA/Ag(111) dynamical hetero-molecular interface CT can be confirmed. In the former system the molecule-metal interface in- teraction is found to dominate the physics of the system in RPES while in the latter system no hints for a significant hybridization at the CuPc-PTCDA interface can be revealed N2 - Diese Dissertation besteht aus zwei Hauptteilen, in denen neue experimentelle Ergeb- nisse präsentiert, ausgewertet und interpretiert werden. Das Ziel dieser Arbeit ist es, dynamischen Ladungstransfer an einer Heteroorganikgrenzfläche mit resonanter Pho- toelektronenspektroskopie (RPES) zu untersuchen. Um dies zu ermöglichen, musste erst eine solche Heteroorganikgrenzfläche, mit den geforderten strukturellen Eigenschaften, gefunden werden, die außerdem noch ein geeignetes Spektrum des Valenzbereichs in direkter Photoelektronenspektroskopie (PES) aufweist. Zusätzlich erforderte die ange- strebte Ladungstransferanalyse mit RPES vorausgehende RPES Messungen an homo- molekularen Systemen. Das dadurch erlangte Wissen konnte dann für die Interpretation von RPES Messungen heteromolekularer Grenzflächenschichten benutzt werden. Der erste Teil dieser Arbeit befasst sich mit der Charakterisierung von heteromolekularen Filmen auf Silbereinkristalloberflächen durch hochauflösende PES der Rumpfzustände und PES der Valenzzustände. Die Reproduktion der Spektren der Rumpfzustände mit PES Referenzspektren homomolekularer Filme ermöglicht es herauszufinden welches Molekül direkt auf der Silberoberfläche liegt und welches in höheren Lagen (nicht der ersten) adsorbiert ist. Außerdem können dadurch Signale in PES Spektren des Valenzbe- reiches gewissen Zuständen zugeordnet werden, da ein direkter Zusammenhang von PES der Rumpfzustände und der Valenzzustände existiert. Dieser wiederum ermöglicht es, durch die Analyse der Daten der Rumpfzustände, herauszufinden, welche Beiträge im Spektrum des Valenzbereichs enthalten sein müssen. Mit der Analyse der PES Spektren der Rumpfzustände wird gezeigt, dass die Systeme PTCDA auf einer Monolage (ML) SnPc auf Ag(111) und CuPc/1 ML PTCDA/Ag(111) bei 300 K stabil sind. Somit kann ein signifikanter Austausch von Molekülen zwischen den beiden Lagen dieser vertikalen Heteroschichten ausgeschossen werden. Dampft man hingegen PTCDA Moleküle auf eine 1 ML CuPc/Ag(111) Schicht auf, so wird ein Austausch von CuPc Molekülen mit PTCDA Molekülen beobachtet. Für eine PTCDA Bedeckung von bis zu 0.5 ML diffundieren alle PTCDA Moleküle in die erste Lage, ersetzen die dort befindlichen CuPc Moleküle und zwingen diese in höhere Lagen. Oberhalb einer PTCDA Bedeckung von 0.5 ML adsorbieren diese Moleküle auch in höheren Lagen. Um weitere Systeme zu finden, die für die geplanten RPES Messungen geeignet sind, werden anschließend ebenfalls heteromolekulare Filme, bestehend aus F4TCNQ und PTCDA Molekülen auf Ag(110), mit der gleichen Methode untersucht. Ähnlich dem Verhalten des Systems PTCDA/1 ML CuPc/Ag(111) wird hierbei ein Austausch von PTCDA Molekülen durch F4TCNQ Moleküle in der ersten Lage des Systems F4TCNQ/1 ML PTCDA/Ag(110) beobachtet. Kehrt man die Präparationsreihenfolge hingegen um, kann bei 300 K ein sta- biler Film von PTCDA/1.0 ML F4TCNQ/Ag(110) erzeugt werden. Das System CuPc auf 1 ML PTCDA/Ag(111) wird als einziges stabiles heteromolekulares System identifiziert, welches sowohl bei 300 K das benötigte benetzende Wachstum der ersten beiden Lagen, als auch ein PES Spektrum des Valenzbereichs mit energetisch trennbaren Molekülor- bitalsignalen im gleichen Intensitätsbereich aufweist. Somit ist gezeigt, dass dieses Sys- tem für eine detaillierte Analyse mit RPES geeignet ist. Der unerwartete Befund, dass bei einigen heteromolekularen Filmen ein vertikaler Aus- tausch stattfindet, motiviert eine Studie des Verhaltens aller heteromolekularen Filme bei höheren Temperaturen. Dabei wird gezeigt, dass ein 1 ML SnPc/Ag(111) Film entsteht, wenn eine 1.5 ML SnPc/1 ML PTCDA/Ag(111) und eine 1.0 ML PTCDA/1 ML SnPc/Ag(111) Probe auf eine Temperatur erhitzt werden, bei der Moleküle, welche nicht direkt auf der Ag(111) Oberfläche adsorbiert sind, desorbieren. Bei erhöhter Tempera- tur (oberhalb ca. 420 K) verdrängen also SnPc Moleküle PTCDA Moleküle aus der ersten Lage auf der Ag(111) Oberfläche. Wird die Temperatur weiter erhöht (ober- halb ca. 470 K), so desorbieren PTCDA und SnPc Moleküle, welche sich nicht in der ersten Lage befinden, von dem entstandenen 1 ML SnPc/Ag(111) Film. Das Er- hitzen aller heteromolekularen Filme, die aus PTCDA und CuPc Molekülen bestehen, auf eine Endtemperatur von 570 K resultiert in einer Probe, bei der sowohl CuPc als auch PTCDA Moleküle in der ersten, und einzigen Lage, adsorbiert sind. Abhängig von der anfänglichen CuPc Bedeckung entstehen verschiedene Verhältnisse der bei- den Moleküle. Eine anfängliche CuPc Bedeckung von genau einer ML, oder darüber, führt zu einem Film mit einer PTCDA Bedeckung von ca. 0.1–0.2 ML. Aus den Heiz- experimenten am System CuPc/1 ML PTCDA/Ag(111) folgt also, dass bei erhöhten Temperaturen CuPc Moleküle den Platz von PTCDA Molekülen in der ersten Lage einnehmen. Gleichermaßen wird der Austausch, der für das System PTCDA/1 ML CuPc/Ag(111) bei 300 K erfolgt ist, wieder rückgängig gemacht. Das Erhitzen einer heteromolekularen Probe mit PTCDA Molekülen und SnPc bzw. CuPc Bedeckungen unterhalb einer ML auf 570 K resultiert in einer gemischten heteromolekularen ML, die eine langreichweitige laterale Ordnung besitzt. Auf diese Art und Weise kann das System CuPc + PTCDA/Ag(111) präpariert werden. Die Charakterisierung dieses Systems zeigt, dass es sich für eine detaillierte Analyse mit RPES eignet. In weiteren Experimenten werden heteromolekulare Filme, bestehend aus F4TCNQ und PTCDA Molekülen auf Ag(110) mit einer F4TCNQ Bedeckung von 1.0 ML, und darüber, erhitzt. Hierbei wer- den Submonolagenfilme von F4TCNQ auf Ag(110) erzeugt, die zusätzlich noch amor- phen Kohlenstoff enthalten. Daraus lässt sich schließen, dass ein Teil der F4TCNQ Moleküle beim Erhitzen auf diese Temperaturen zersetzt werden. Im zweiten Teil dieser Arbeit werden homomolekulare Multilagen-, Monolagen und Submololagenfilme auf einkristallinen Metalloberflächen mit RPES untersucht, um die dadurch erlangten Ergebnisse auf RPES Messungen an heteromolekularen Filmen anzu- wenden. Als erstes wird anhand von Messungen an Multilagenfilmen zweier Modell- moleküle (NTCDA und Coronen) die Abhängigkeit der Intensitätsvariation (einer Grup- pe) von Molekülorbitalsignalen von der Photonenenergie (hν) untersucht. Die gewon- nenen Daten werden durch den lokalen Charakter der elektronischen Übergänge in der Nahkantenröntgenabsorptionsfeinstrukturspektroskopie (NEXAFS) und der Realraum- wahrscheinlichkeitsdichte der beitragenden Molekülorbitale erklärt. Mit diesem ver- einfachten Denkansatz können relative Intensitätsvariationen über Größenordnungen be-schrieben werden, bei relativen Veränderungen der Intensität innerhalb der selben Grö- ßenordnung versagt diese Erklärung allerdings. Daraufhin wird die hν Abhängigkeit der Linienformentwicklung von einem energetisch trennbaren Molekülorbitalsignal einer CuPc Multilage im Vergleich zu kleinen Molekülen in der Gasphase diskutiert und auf einen Effekt der Kopplung von Vibrationen an elektronische Übergänge zurückgeführt. Ein anschließender Vergleich dieser hν Abhängigkeit der Linienformentwicklung des höchsten besetzten Molekülorbitals (HOMO) von CuPc und SnPc Multilagen offen- bart den molekülspezifischen Charakter dieses Effekts. Danach wird gezeigt, dass für eine Multilage Coronen der selbe Effekt, allerdings mit der Beteiligung zweier (oder mehrerer) elektronischer Übergänge oder aneinander koppelnder Vibrationsmoden, zu sehen ist. Im Anschluss wird der Einfluss durch die Adsorption auf einer Metallober- fläche auf diesen Effekt untersucht und im Hinblick auf eine mögliche Beteiligung von Signalen diskutiert, in deren Entstehung Ladungstransfer beteiligt ist. Der Vergleich der RPES Messung eines Submonolagenfilms von SnPc auf Au(111) und den entsprechen- den Daten einer SnPc Multilage zeigt keinerlei sichtbare Veränderung. Demgegenüber wird für eine Submonolage CuPc auf Au(111) eine verminderte Intensitätsumverteilung in den Teil größerer Bindungsenergie (EB) des HOMO, im Vergleich zur einer CuPc Multilage, festgestellt. Vergleicht man die RPES Daten von einer Submonolage Coro- nen/Ag(111) mit denen des entsprechenden Multilagenfilms, erkennt man eine reso- nanzspezifische Veränderung der hν Abhängigkeit der Linienformentwicklung, da sich nur in einer der beiden NEXAFS Resonanzen eine Veränderung dieses Effekts zwischen dem Submonolagen- und dem Multilagenfilm zeigt. Alle diese experimentellen Be- funde können mit einem einzigen Effekt und einem gemeinsamen Parametersatz erklärt werden. Dies sind alle Parameter, die benötigt werden, um die Potentialenergieober- flächen zu beschreiben, welche im RPES Prozess involviert sind. Dadurch kann eine Alternativerklärung, die auf dynamischem Ladungstransfer beruht, ausgeschlossen wer- den, was wiederum die folgende Ladungstransferanalyse mit RPES entscheidend beein- flusst. Eine solche Ladungstransferanalyse mit RPES kann durch den Nachweis von drei ver- schiedenen mit dynamischem Ladungstransfer assoziierten Signalen durchgeführt wer- den. Ein in den RPES Daten von einer Submonolage Coronen/Ag(111) detektiertes Sig- nal bei niedriger EB kann, durch die Zuordnung eines spezifischen Endzustandes, mit Ladungstransfer über die Grenzfläche zwischen Molekül und Metall hinweg in Verbin- dung gebracht werden. Folglich wird dieses Signal Ladungstransferzustand genannt. Im EB Bereich der am schwächsten gebundenen Molekülorbitalsignale zeigen RPES Messungen eine verbreiterte Linienform für diejenigen Molekülmetallgrenzflächensys- teme, welche ein Signal des niedrigsten unbesetzten Molekülorbitals (LUMO) in di- rekter PES aufweisen. Durch den Vergleich mit der Linienform des Ladungstransfer- zustandes kann eine mögliche Erklärung für diesen experimentellen Befund entwickelt werden, die diesen mit Ladungstransfer in Verbindung bringt. Als drittes Signal, das für eine Ladungstransferanalyse mit RPES herangezogen werden kann, dienen Signale konstanter kinetische Energie (EK ), welche sich in den RPES Daten einiger Molekül- metallgrenzflächensysteme zeigen. Die gemessene Energie dieser Signale kann für die Molekülmetallgrenzflächensysteme, welche kein Signal des LUMO in direkter PES auf- weisen, durch die Zuordnung des verantwortlichen Zerfallskanals und explizit ange- führte Vereinfachungen erfolgreich berechnet werden. Dadurch wird die Beteiligung von Ladungstransfer über die Grenzfläche zwischen Molekül und Metall im Erzeugungspro- zess dieser Signale konstanter EK gezeigt. In den RPES Daten der lateralen und ver- tikalen heteromolekularen Grenzflächensysteme, die im ersten Teil dieser Arbeit identi- fiziert wurden, wird dann letztendlich nach einem Beitrag dieser drei mit Ladungstrans- fer assoziierten Signale gesucht. Weder für das laterale heteromolekulare System CuPc + PTCDA/Ag(111) noch für das vertikale heteromolekulare System CuPc auf 1 ML PTCDA/Ag(111) kann, durch die Detektion eines dieser Signale, Ladungstransfer ent- lang der heteromolekularen Grenzfläche bestätigt werden. Als entscheidender Faktor für die physikalische Beschreibung von RPES am ersten System wird die Wechselwirkung zwischen Molekül und Metall identifiziert. Das zentrale Ergebnis für das zweite Sys- tem ist, dass keine Hinweise auf eine signifikante Hybridisierung an der Grenzfläche zwischen CuPc und PTCDA entdeckt werden können. KW - Organisches Molekül KW - resonant photoelectron spectroscopy KW - molecule-metal interfaces KW - heteromolecular interfaces KW - photoelectron spectroscopy KW - Adsorptionsschicht KW - Photoelektronenspektroskopie KW - Röntgen-Photoelektronenspektroskopie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-107928 ER - TY - THES A1 - Neumann, Daniel T1 - Advances in Fast MRI Experiments T1 - Neue Methoden in der MR-Bildgebung N2 - Magnetic Resonance Imaging (MRI) is a non-invasive medical imaging technique, that is rou- tinely used in clinical practice for detection and diagnosis of a wide range of different diseases. In MRI, no ionizing radiation is used, making even repeated application unproblematic. This is an important advantage over other common imaging methods such as X-rays and Computer To- mography. One major drawback of MRI, however, are long acquisition times and associated high costs of experiments. Since the introduction of MRI, several important technical developments have been made to successfully reduce acquisition times. In this work, novel approaches were developed to increase the efficiency of MRI acquisitions. In Chapter 4, an improved radial turbo spin-echo (TSE) combined acquisition and reconstruction strategy was introduced. Cartesian turbo spin-echo sequences [3] are widely used especially for the detection and diagnosis of neurological pathologies, as they provide high SNR images with both clinically important proton density and T2 contrasts. TSE acquisitions combined with radial sampling are very efficient, since it is possible to obtain a number of ETL images with different contrasts from a single radial TSE measurement [56–58]. Conventionally, images with a particular contrast are obtained from both radial and Cartesian TSE acquisitions by combining data from different echo times into a single image. In the radial case, this can be achieved by employing k-space weighted image contrast (KWIC) reconstruction. In KWIC, the center region of k-space is filled exclusively with data belonging to the desired contrast while outer regions also are assembled with data acquired at other echo times. However, this data sharing leads to mixed contrast contributions to both Cartesian and radial TSE images. This is true especially for proton density weighted images and therefore may reduce their diagnostic value. In the proposed method, an adapted golden angle reordering scheme is introduced for radial TSE acquisitions, that allows a free choice of the echo train length and provides high flexibility in image reconstruction. Unwanted contrast contaminations are greatly reduced by employing a narrow-band KWIC filter, that restricts data sharing to a small temporal window around the de- sired echo time. This corresponds to using fewer data than required for fully sampled images and consequently leads to images exhibiting aliasing artifacts. In a second step, aliasing-free images are obtained using parallel imaging. In the neurological examples presented, the CG-SENSE algorithm [42] was chosen due to its stable convergence properties and its ability to reconstruct arbitrarily sampled data. In simulations as well as in different in vivo neurological applications, no unwanted contrast contributions could be observed in radial TSE images reconstructed with the proposed method. Since this novel approach is easy to implement on today’s scanners and requires low computational power, it might be valuable for the clinical breakthrough of radial TSE acquisitions. In Chapter 5, an auto-calibrating method was introduced to correct for stimulated echo contribu- tions to T2 estimates from a mono-exponential fit of multi spin-echo (MSE) data. Quantification of T2 is a useful tool in clinical routine for the detection and diagnosis of diseases as well as for tis- sue characterization. Due to technical imperfections, refocusing flip angles in a MSE acquisition deviate from the ideal value of 180○. This gives rise to significant stimulated echo contributions to the overall signal evolution. Therefore, T2 estimates obtained from MSE acquisitions typically are notably higher than the reference. To obtain accurate T2 estimates from MSE acquisitions, MSE signal amplitudes can be predicted using the extended phase graph (EPG, [23, 24]) algo- rithm. Subsequently, a correction factor can be obtained from the simulated EPG T2 value and applied to the MSE T2 estimates. However, EPG calculations require knowledge about refocus- ing pulse amplitudes, T2 and T1 values and the temporal spacing of subsequent echoes. While the echo spacing is known and, as shown in simulations, an approximate T1 value can be assumed for high ratios of T1/T2 without compromising accuracy of the results, the remaining two parameters are estimated from the data themselves. An estimate for the refocusing flip angle can be obtained from the signal intensity ratio of the second to the first echo using EPG. A conventional mono- exponential fit of the MSE data yields a first estimate for T2. The T2 correction is then obtained iteratively by updating the T2 value used for EPG calculations in each step. For all examples pre- sented, two iterations proved to be sufficient for convergence. In the proposed method, a mean flip angle is extracted across the slice. As shown in simulations, this assumption leads to greatly reduced deviations even for more inhomogeneous slice profiles. The accuracy of corrected T2 values was shown in experiments using a phantom consisting of bottles filled with liquids with a wide range of different T2 values. While T2 MSE estimates were shown to deviate significantly from the spin-echo reference values, this is not the case for corrected T2 values. Furthermore, applicability was demonstrated for in vivo neurological experiments. In Chapter 6, a new auto-calibrating parallel imaging method called iterative GROG was pre- sented for the reconstruction of non-Cartesian data. A wide range of different non-Cartesian schemes have been proposed for data acquisition in MRI, that present various advantages over conventional Cartesian sampling such as faster acquisitions, improved dynamic imaging and in- trinsic motion correction. However, one drawback of non-Cartesian data is the more complicated reconstruction, which is ever more problematic for non-Cartesian parallel imaging techniques. Iterative GROG uses Calibrationless Parallel Imaging by Structured Low-Rank Matrix Completion (CPI) for data reconstruction. Since CPI requires points on a Cartesian grid, it cannot be used to directly reconstruct non-Cartesian data. Instead, Grappa Operator Gridding (GROG) is employed in a first step to move the non-Cartesian points to the nearest Cartesian grid locations. However, GROG requires a fully sampled center region of k-space for calibration. Combining both methods in an iterative scheme, accurate GROG weights can be obtained even from highly undersampled non-Cartesian data. Subsequently, CPI can be used to reconstruct either full k- space or a calibration area of arbitrary size, which can then be employed for data reconstruction with conventional parallel imaging methods. In Chapter 7, a new 2D sampling scheme was introduced consisting of multiple oscillating effi- cient trajectories (MOET), that is optimized for Compressed Sensing (CS) reconstructions. For successful CS reconstruction of a particular data set, some requirements have to be met. First, ev- ery data sample has to carry information about the whole object, which is automatically fulfilled for the Fourier sampling employed in MRI. Additionally, the image to be reconstructed has to be sparse in an arbitrary domain, which is true for a number of different applications. Last, data sam- pling has to be performed in an incoherent fashion. For 2D imaging, this important requirement of CS is difficult to achieve with conventional Cartesian and non-Cartesian sampling schemes. Ra- dial sampling is often used for CS reconstructions of dynamic data despite the streaking present in undersampled images. To obtain incoherent aliasing artifacts in undersampled images while at the same time preserving the advantages of radial sampling for dynamic imaging, MOET com- bines radial spokes with oscillating gradients of varying amplitude and alternating orientation orthogonal to the readout direction. The advantage of MOET over radial sampling in CS re- constructions was demonstrated in simulations and in in vivo cardiac imaging. MOET provides superior results especially when used in CS reconstructions with a sparsity constraint directly in image space. Here, accurate results could be obtained even from few MOET projections, while the coherent streaking artifacts present in the case of radial sampling prevent image recovery even for smaller acceleration factors. For CS reconstructions of dynamic data with sparsity constraint in xf-space, the advantage of MOET is smaller since the temporal reordering is responsible for an important part of incoherency. However, as was shown in simulations of a moving phantom and in the reconstruction of ungated cardiac data, the additional spatial incoherency provided by MOET still leads to improved results with higher accuracy and may allow reconstructions with higher acceleration factors. N2 - Die Magnetresonanztomographie (MRT) ist ein wichtiges nicht-invasives medizinisches Bildge- bungsverfahren, das im klinischen Alltag zur Entdeckung und Diagnose einer Vielzahl von Krank- heiten verwendet wird. Im Gegensatz zu anderen Methoden wie Röntgen und Computertomo- graphie kommt die MRT ohne den Einsatz ionisierender Strahlung aus, was selbst häufige An- wendungen ohne gesundheitliche Risiken erlaubt. Einer der größten Nachteile der MRT sind lange Messzeiten, die in Kombination mit der teuren Technik hohe Untersuchungskosten bedin- gen. Obwohl in der Vergangenheit durch die Entwicklung von sowohl verbesserter Hardware als auch neuen Rekonstruktionsverfahren bereits bedeutende Fortschritte in Bezug auf die Akquisi- tionsdauer erzielt werden konnten, ist eine weitere Beschleunigung nach wie vor ein wichtiges Forschungsgebiet im Bereich der MRT. Ziel dieser Arbeit war daher die Entwicklung neuer An- sätze zur Steigerung der Effizienz von MRT Experimenten. In Kapitel 4 wurde eine kombinierte Akquisitions- und Rekonstruktionsstrategie für radiale Turbo Spin-Echo (TSE) Experimente vorgestellt. Im klinischen Alltag sind kartesische TSE Sequenzen zur Untersuchung diverser Krankheitsbilder weit verbreitet, da sie ein hohes SNR aufweisen und die Aufnahme der klinisch wichtigen Bilder mit Protonendichte- und T2-Kontrast erlauben. Im Gegensatz zu kartesischem Abtasten, wo aus einem Datensatz lediglich ein Bild mit bes- timmtem Kontrast erzeugt wird, sind radiale TSE Akquisitionen hocheffizient, da hier aus einem Datensatz mehrere Bilder mit verschiedenem Kontrast gewonnen werden können. In beiden Fällen wird in konventionellen Rekonstruktionsmethoden jedes Bild eines definierten Kontrasts durch das Zusammensetzen eines vollständig abgetasteten k-Raums mit Daten von verschiedenen Echozeiten erzeugt. Im radialen Fall geschieht dies durch die sogenannte "k-space weighted im age contrast" (KWIC) Rekonstruktion. Hierbei wird das Zentrum des k-Raums ausschließlich mit zum gewünschten Kontrast gehörigen Daten gefüllt, während die äußeren Bereiche des k-Raums auch Daten von anderen Echozeiten enthalten. Obwohl der Kontrast von MRT Bildern haupt- sächlich von den Daten im k-Raum Zentrum dominiert wird, führt die Kombination von Daten verschiedener Echozeiten in sowohl radialen als auch kartesischen TSE Bildern zu einem uner- wünschten Mischkontrast. Dieser Effekt wird vor allem in protonendichtegewichteten Bildern sichtbar und kann somit deren diagnostischen Wert deutlich verringern. Ein unerwünschter Mischkontrast kann verhindert werden, indem die Bandbreite des KWIC- Filters auf ein kleines zeitliches Fenster um die angestrebte Echozeit herum eingeschränkt wird. Um eine freie Wahl der Echozuglänge und hohe Flexibilität in der Bildrekonstruktion zu er- möglichen, wurde für die radiale TSE Akquisition ein angepasstes Abtastschema unter Verwen- dung des goldenen Winkels vorgestellt. Da bei einem KWIC-Filter mit reduzierter Bandbre- ite für jedes Bild weniger Daten zur Verfügung stehen als für einen voll abgetasteten k-Raum benötigt, weisen rekonstruierte Bildern Einfaltungsartefakte auf. Diese werden in einem zweiten Schritt durch die Anwendung paralleler Bildgebung beseitigt. In den gezeigten Beispielen wurde dazu der CG-SENSE Algorithmus verwendet, da er stabile Konvergenz aufweist und für die Rekonstruktion von Daten mit irregulären Abtastschema angewandt werden kann. Anschließend werden bestehende Korrelationen der Bilderserie zur Reduktion verbleibender Artefakte und zu einer Verbesserung des SNR ausgenutzt. Wie mittels Simulationen gezeigt und für neurologische Daten bestätigt, weisen radiale TSE Bilder, die mit dieser Methode rekonstruiert wurden, keinen sichtbaren Mischkontrast mehr auf. Die erreichte Bildqualität ist hierbar vergleichbar mit kon- ventionellen Rekonstruktionsmethoden. Da die vorgestellte Rekonstruktion einfach auf heutigen Scannern implementiert werden kann und lediglich niedrige Rechenkapazitäten benötigt, könnte sie einen wichtigen Beitrag für den klinischen Durchbruch radialer TSE Akquisitionen darstellen. In Kapitel 5 wurde eine selbstkalibrierende Methode zur Korrektur von aus Multi Spin-Echo (MSE) Bildern gewonnenen T2 Karten vorgestellt. In der klinischen Anwendung spielt die Quan- tifizierung von T2 unter anderem bei der Diagnose von Krankheiten sowie bei der Klassifizierung von Gewebe eine wichtige Rolle. Eine MSE Sequenz verwendet mehrere RF-Pulse, um ein einzelnes Spin-Echo wiederholt zu refokussieren. Idealerweise betragen die Flipwinkel der Re- fokussierungspulse hierbei exakt 180○, um einen exponentiellen Signalabfall zu erhalten. Auf- grund technischer Ungenauigkeiten weichen die Werte der Flipwinkel von Refokussierungspulsen jedoch grundsätzlich von 180○ ab. Niedrigere Flipwinkel führen zu stimulierten Echos, die wesentlich zu den einzelnen Echoamplituden beitragen und den Signalabfall entlang des Echozugs deutlich verlängern können. Somit weisen auch T2 Werte, die aus solchen Bilderserien berech- net werden, eine teilweise deutliche Erhöhung auf. Um exakte Werte zu erhalten, kann der MSE Signalverlauf mittels des "extended phase graph" (EPG) Algorithmus abgeschätzt und so ein Kor- rekturfaktor ermittelt werden. Hierzu müssen die Flipwinkel der Refokussierungspulse, T1 und T2 Werte sowie der zeitliche Abstand der Echos (ESP) bekannt sein. Wie in Simulationen gezeigt wurde, kann T1 für hohe Werte des Quotienten T1/T2 abgeschätzt werden, ohne an Genauigkeit der T2 Ergebnisse einzubüßen. Abschätzungen der verbleibenden benötigten Parameter können direkt aus den Daten selbst gewonnen werden. Während der Flipwinkel aus den Intensitäten der ersten beiden Echos berechnet wird, liefert ein mono-exponentieller Fit der MSE Bilderserie eine erste Näherung für T2. Die Korrektur für die T2 Werte kann anschließend aus den EPG Sig- nalverläufen berechnet werden. Durch Aktualisierung von T2 und erneuter Ausführung des EPG-Algorithmus wird die Genauigkeit der Korrektur iterativ erhöht, wobei schon eine sehr geringe Zahl von Iterationen zu Konvergenz führt. Wie in Simulationen und in Phantomexperimenten für verschiedenste T2-Werte gezeigt, weisen korrigierte T2 Werte eine hohe Genauigkeit auf. Dies gilt auch für niedrigere nominelle Flipwinkel als 180○ und ist somit von speziellem Interesse bei höheren Feldstärken B0, wo Grenzwerte der spezifischen Absorptionsrate die Einstrahlung einer Vielzahl von RF-Pulsen hoher Amplitude verbietet. In Kapitel 6 wurde iteratives GROG, eine neue selbstkalibrierende iterative parallele Bildge- bungsmethode für die Rekonstruktion von nichtkartesischen Daten vorgestellt. Es sind eine Vielzahl nichtkartesischer Trajektorien für MRT Messungen bekannt, die zahlreiche Vorteile gegenüber kartesischer Bildgebung bieten. Dazu gehören unter anderem eine schnellere Akquisi- tion, verbesserte dynamische Bildgebung sowie die Möglichkeit zur intrinischen Bewegungskor- rektur. Ein Nachteil nichtkartesischer Daten jedoch ist eine aufwendigere Rekonstruktion, sowohl bei voll abgetasteten Datensätzen als insbesondere auch in der parallelen Bildgebung. Itera- tives GROG verwendet Calibrationless Parallel Imaging by Structured Low-Rank Matrix Com- pletion (CPI) zur Rekonstruktion fehlender Daten. Diese Methode benötigt Daten auf karte- sischen Gitterpunkten und kann nicht direkt für nichtkartesische Experimente angewandt wer- den. Stattdessen werden die nichtkartesischen Daten zunächst mittels Grappa Operator Gridding (GROG) in einem ersten Schritt auf ein kartesisches Gitter verschoben. GROG basiert auf paral- leler Bildgebung und benötigt einen voll abgetasteten Teil des k-Raums zur Kalibrierung. Erste Kalibrationsdaten können gewonnen werden, indem die nichtkartesischen Punkte ohne Änderung auf die nächsten kartesischen Gitterpunkte verschoben werden und eine CPI-Rekonstruktion eines zentralen k-Raum Bereichs durchgeführt wird. Anschließend wird GROG angewandt um exakte Werte der kartesischen Gitterpunkte zu erhalten und der Prozess wird iteriert. Nach Kon- vergenz können entweder Kalibrationsdaten gewünschter Größe für eine konventionelle parallele Bildgebungsmethode erzeugt oder artefaktfreie Bilder mit CPI rekonstruiert werden. In Kapitel 7 wurde ein neues Abtastungsschema für die 2D Bildgebung vorgestellt, das aus Multiplen Oszillierenden Effizienten Trajektorien (MOET) besteht und optimierte Compressed Sensing (CS) Rekonstruktionen ermöglicht. Für eine erfolgreiche Anwendung von Compressed Sensing müssen einige Voraussetzungen erfüllt sein. Erstens muss jeder Datenpunkt Informa- tionen über das ganze Objekt enthalten, was bei der MRT aufgrund der Datenakquisition im Fourier-Raum automatisch erfüllt ist. Weiterhin muss das gemessene Objekt in einer beliebigen Basis sparse sein. Dies ist für viele verschiedene Anwendungen in der MRT der Fall. Drittens muss für CS Rekonstruktionen die Datenakquisition im k-Raum einem inkohärenten Muster fol- gen. Diese wichtige Voraussetzung ist in der zweidimensionalen Bildgebung mit konventionellen kartesischen und nicht-kartesischen Abtastschemata nur schwer zu erreichen. Deshalb wird für CS Rekonstruktionen häufig eine radiale Trajektorie eingesetzt, trotz der kohärenten streaking- Artefakte in unterabgetasteten Bildern. MOET verwendet daher eine Kombination von radialen Projektionen zusammen mit oszillierenden Gradienten auf der zur Ausleserichtung orthogonalen Achse. So erhält man inkohärente Aliasing-Artefakte und bewahrt gleichzeitig die Vorteile der radialen Bildgebung für die dynamische MRT. Die Überlegenheit von MOET gegenüber radi- aler Bildgebung für CS Rekonstruktionen konnte in Simulationen sowie in der Herzbildgebung aufgezeigt werden. Dies gilt insbesondere für CS Rekonstruktionen direkt im Bildraum, wo MOET gute Resultate liefert während die kohärenten Artefakte bei radialer Bildgebung eine genaue Bildwiederherstellung verhindert. Bei Rekonstruktionen dynamischer Daten, wo Sparsität im xf-Raum ausgenutzt wird, ist der Vorteil von MOET weniger ausgeprägt, da hier bere- its die zeitliche Anordnung der Projektionen einen wesentlichen Beitrag zur Charakteristik der Aliasingartefakte liefert. Wie in Simulationen und für die in vivo Herzbildgebung gezeigt werden konnte, erlaubt die zusätzliche räumliche Inkohärenz von MOET jedoch auch in diesem Fall eine höhere Genauigkeit sowie Rekonstruktionen von Daten höherer Beschleunigung. KW - Kernspintomografie KW - Parallele Bildgebung KW - nichtkarthesische Bildgebung KW - Turbo Spin-Echos KW - Compressed Sensing KW - Parallel Imaging KW - non-Cartesian Imaging KW - Compressed Sensing KW - MRI KW - MRT KW - NMR-Tomographie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-108165 ER - TY - THES A1 - Gieseking, Björn T1 - Excitation Dynamics and Charge Carrier Generation in Organic Semiconductors T1 - Anregungsdynamik und Ladungsträgergenerierung in organischen Halbleitern N2 - The transport of optically excited states, called excitons, as well as their conversion into charges define the two major steps allowing for the operation of organic photovoltaic (OPV) devices. Hence, a deep understanding of these processes, the involved mechanisms as well as possible loss channels is crucial for further improving the efficiency of organic solar cells. For studying the aforementioned processes spectroscopic methods like absorption and emission measurements are useful tools. As many of the processes take place on a sub-nanosecond (ns) timescale ultrafast spectroscopic methods are required. Due to this reason two experiments based on a femtosecond laser system were built and employed in this work, namely picosecond (ps) time-resolved photoluminescence (PL) and transient absorption (TA) spectroscopy. By analyzing the PL decay dynamics in the prototypical organic semiconductor rubrene, the feasibility of a new approach for improving the efficiency of organic solar cells by harvesting triplet excitons generated by singlet fission was examined. Singlet fission describes a process where two triplet excitons are generated via a photoexcited singlet exciton precursor state if the energy of the two triplets is comparable with the energy of the singlet. For this purpose the influence of characteristic length scales on the exciton dynamics in different rubrene morphologies exhibiting an increasing degree of confinement was analyzed. The results show that the quenching at interfacial states efficiently suppresses the desired fission process if these states are reached by excitons during migration. Since interfacial states are expected to play a significant role in thin film solar cells and are easily accessible for the migrating excitons, the results have to be considered for triplet-based OPV. While the aforementioned approach is only investigated for model systems so far, the efficiency of disordered organic bulk heterojunction (BHJ) solar cells could be significantly enhanced in the last couple of years by employing new and more complex copolymer donor materials. However, little is known about the photophysics and in particular the excitation dynamics of these systems. By carrying out a systematic optical study on the prominent copolymer PCDTBT and its building blocks we were able to identify the nature of the two characteristic absorption bands and the coupling mechanism between these levels. The latter mechanism is based on an intrachain partial charge transfer between two functional subunits and our time-resolved measurements indicate that this coupling governs the photophysical properties of solar cells based on these copolymers. The efficient coupling of functional subunits can be seen as a key aspect that guarantees for the success of the copolymer approach. Another important issue concerns the optimization of the morphology of BHJ solar cells. It arises from the discrepancy between the exciton diffusion length \mbox{($\approx$ 10 nm)} and the absorption length of solar irradiation ($\approx$ 100 nm). Due to this reason, even for devices based on new copolymer materials, processing parameters affecting the morphology like annealing or employing processing additives are of major importance. In our combined optical, electrical and morphological study for solar cells based on the high-efficient copolymer PBDTTT-C we find a direct correlation between additive content and intermixing of the active layer. The observed maximum in device efficiency can be attributed to a morphology guaranteeing for an optimized balance between charge generation and transport. Our results highlight the importance of understanding the influence of processing parameters on the morphology of the BHJ and thus on the efficiency of the device. N2 - Der Transport optischer Anregungen, genannt Exzitonen, sowie deren Umwandlung in Ladungsträger stellen die beiden wesentlichen Mechanismen dar, welche die Funktion von organischer Photovoltaik (OPV) erst ermöglichen. Daher ist ein genaues Verständnis dieser Prozesse, der beteiligten Mechanismen sowie möglicher Verlustkanäle von essentieller Bedeutung, um die Effizienz organischer Solarzellen weiter zu steigern. Für die Untersuchung der genannten Vorgänge bieten sich grundsätzlich spektroskopische Methoden, wie etwa die Untersuchung der Absorptions- und Emissioncharakteristiken, an. Da sich viele der erwähnten Prozesse auf der sub-Nanosekunden (ns) Zeitskala abspielen, werden für deren Unteruchung hoch-zeitaufgelöste Messmethoden benötigt. Aus diesem Grund wurden im Rahmen dieser Arbeit zwei Messmethoden, basierend auf einem Femtosekunden-Lasersystem aufgebaut und verwendet. Hierbei handelt es sich um die Picosekunden (ps) zeitaufgelöste Photolumineszenz-Spektroskopie (PL) und die transiente Absorptionsspektroskopie (TA). Anhand des prototypischen organischen Halbleiters Rubren habe ich mich mit der Fragestellung beschäftigt, inwieweit ein alternativer Ansatz zur Erhöhung der Effizienz von organischen Solarzellen, basierend auf der Nutzung von Triplet Exzitonen, welche durch Singlet Fission generiert wurden, genutzt werden könnte. Bei der Singlet Fission werden aus einem optisch angeregten Singlet Exziton zwei Triplet Exzitonen erzeugt, unter der Voraussetzung, dass die Summe der Energien der beiden Triplets in etwa der Energie des Singlet Exzitons entspricht. Hierfür wurde der Einfluss von charakteristischen Längenskalen auf die Exzitonendynamik in verschiedenen Rubren-Morphologien, die ein zunehmend begrenztes Anregungsvolumen aufweisen, untersucht. Dabei zeigt sich, dass durch den Einfluss von Grenzflächenzuständen der erwünschte Singlet Fission Prozess effizient unterdrückt wird, sollten diese Zustände von Exzitonen während ihrer Migration erreicht werden. Dieser Sachverhalt ist bei einer möglichen Realisierung von Triplet-basierter OPV zu berücksichtigen, da in Dünnschicht-Solarzellen solche Grenzflächenzustände eine relevante Rolle spielen und für Exzitonen gut zugänglich sind. Während der oben genannte Ansatz bis jetzt nur für Modellsysteme untersucht wird, konnte die Effizienz ungeordneter organischer ''bulk heterojunction'' (heterogemisch, BHJ) Solarzellen in den vergangenen Jahren durch die Verwendung neuer, komplexerer Donormaterialen signifikant gesteigert werden. Allerdings war eine genaue Kenntnis der dahinter stehenden Photophysik und insbesondere der Anregungsdynamik dieser Systeme nicht vorhanden. Anhand einer systematischen optischen Studie am prominenten Copolymer PCDTBT und seiner Bausteine konnte die Natur der angeregten Zustände und deren Kopplungsmechanismus, basierend auf einem teilweisen Ladungsübertrag zwischen zwei funktionalen Gruppen des Copolymers identifiziert werden. Die Ergebnisse der zeitaufgelösten Messungen deuten darauf hin, dass dieser interne Kopplungsmechanismus die Photophysik von organischen Solarzellen, basierend auf diesen Copolymeren bestimmt. Diese effiziente Kopplung ist ein wesentlicher Grund für den Erfolg des Copolymerkonzeptes. Ein weiterer wichtiger Aspekt betrifft die Optimierung der Morphologie der aktiven Schicht von BHJ Solarzellen, welcher sich aus der Diskrepanz zwischen Exzitonendiffusionslänge ($\approx$ 10 nm) und Absorptionslänge des Sonnenlichts \mbox{($\approx$ 100 nm)} ergibt. Aus diesem Grund sind auch bei BHJ Zellen, basierend auf neuartigen Copolymeren die Prozessparameter, welche die Morphologie beeinflussen --- wie das Ausheizen der Zelle oder die Zugabe von Additiven --- von großer Bedeutung. Unsere kombinierte optische, elektrische und morphologische Studie an Solarzellen, basierend auf dem hocheffizienten Copolymer PBDTTT-C zeigt dabei einen direkten Zusammenhang von Additivkonzentration und Durchmischungsgrad der aktiven Schicht. Das beobachtete Effizienzmaximum ergibt sich dabei für diejenige Morphologie, welche ein optimiertes Gleichgewicht zwischen Erzeugung und Transport von Ladungsträgern aufweist. Die Ergebnisse verdeutlichen, wie wichtig das Verständnis der Auswirkungen einzelner Prozessparameter auf die Morphologie und damit die Effizienz von BHJ Solarzellen ist. KW - Organische Solarzelle KW - Photovoltaik KW - Organischer Halbleiter KW - Charge Carrier Generation KW - Singlet Fission KW - Experimental Physics KW - Ultrafast Spectroscopy KW - Organic Semiconductors KW - Organic Photovoltaics KW - Excitons Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101625 ER - TY - THES A1 - Samiepour, Marjan T1 - Fabrication and characterization of CPP-GMR and spin-transfer torque induced magnetic switching T1 - Herstellung und Charakterisierung von CPP-GMR und Spin-Transfer-Drehmoment induzierten magnetisches Schalten N2 - Even though the unique magnetic behavior for ferromagnets has been known for thousands of years, explaining this interesting phenomenon only occurred in the 20th century. It was in 1920, with the discovery of electron spin, that a clear explanation of how ferromagnets achieve their unique magnetic properties came to light. The electron carries an intrinsic electric charge and intrinsic angular momentum. Use of this property in a device was achieved in 1998 when Fert and Gru¨nberg independently found that the resistance of FM/NM/FM trilayer depended on the angle between the magnetization of the two layers. This phenomena which is called giant magnetoresistance (GMR) brought spin transfer into mainstream. This new discovery created a brand new research fi called “spintronics” or “spin based electronics” which exploits the intrinsic spin of electron. As expected spintronics delivered a new generation of magnetic devices which are currently used in magnetic disk drives and magnetic random access memories (MRAM). The potential advantages of spintronics devices are non-volatility, higher speed, increased data density and low power consumption. GMR devices are already used in industry as magnetic memories and read heads. The quality of GMR devices can be increased by developing new magnetic materials and also by going down to nanoscale. The desired characteristic properties of these new materials are higher spin polarization, higher curie temperature and better spin filtering. Half-metals are a good candidate for these devices since they are expected to have high polarization. Some examples of half-metals are Half-Heusler alloy, full Heusler alloy and Perovskite or double Perovskite oxides. The devices discussed in this thesis have NiMnSb half-Heusler alloy and permalloy as the ferromagnetic layers separated by Cu as the nonmagnetic layer. This dissertation includes mainly two parts, fabrication and characterization of nan- opillars. The layer stack used for the fabrication is Ru/Py/Cu/NiMnSb which is grown on an InP substrate with an (In,Ga)As buff by molecule beam epitaxy (MBE). A new method of fabrication using metal mask which has a higher yield of working samples over the previous method (using the resist mask) used in our group is discussed in detail. Also, the advantages of this new method and draw backs of the old method are explained thoroughly (in chapter 3). The second part (chapters 4 and 5) is focused on electrical measurements and charac- terization of the nanopillar, specially with regard to GMR and spin-transfer torque (STT) measurements. In chapter 4, the results of current perpendicular the plane giant mag- netoresistance (CPP-GMR) measurements at various temperatures and in-plane magnetic fi are presented. The dependence of CPP-GMR on bias current and shape anisotropy of the device are investigated. Results of these measurements show that the device has strong shape anisotropy. The following chapter deals with spin-transfer torque induced magnetic switching measurements done on the device. Critical current densities are on the order of 106 A/cm2, which is one order of magnitude smaller than the current industry standards. Our results show that the two possible magnetic configurations of the nanopillar (parallel and anti-parallel) have a strong dependence on the applied in-plane magnetic fi Fi- nally, four magnetic fi regimes based on the stability of the magnetic configuration (P stable, AP stable, both P and AP stable, both P and AP unstable) are identified. N2 - Obwohl das einzigartige ferromagnetische Verhalten seit Tausenden Jahren bekannt ist, traten Erklärungen zu diesem interessanten Phänomen erst im 20. Jahrhundert auf. Erst im Jahr 1920, mit der Entdeckung des Elekronenspin, gab es eine Vorstellung davon, wie die Ferromagnetika ihre einzigartigen magnetischen Eigenschaften erhalten. Die Elektronen sind sowohl Träger einer intrinsischen Ladung als auch eines intrinsichen Drehimpulses. Die Nutzung dieser Eigenschaften in Bauteilen wurde 1998 erreicht, als Fert und Grünberg unabhängig voneinander die Entdeckung machten, dass der Widerstand eines Dreischichtsystems bestehend aus FM/NM/FM abha¨ngig vom Winkel der Magnetisierung in den zwei ferromagnetischen Schichten ist. Dieses Phänomen, welches als Riesenmagnetwiderstand (GMR, Giant Magnetoresistance) bekannt ist, führte dazu, dass sich der Spintransport zu einem Mainstream entwickelte. Diese neuartige Entdeckung brachte ein ganz neues Forschungsgebiet hervor, das als sogenannte Spintronik oder auch spinbasierte Elektronik bekannt ist, welche den intrinsischen Spin der Elektronen nutzt. Wie erwartet lieferte die Spintronik eine neue Generation von magnetischen Bauelementen, welche in Festplatten und magnetoresistiven RAM-Speichern (MRAM, magnetic random access memory) zu fi sind. Die großen Vorteile der spintronischen Bauelemente sind die Nichtvolalität, die höheren Geschwindigkeiten, die verbesserte Datendichte und der geringerer Energieverbrauch. GMR-Bauteile werden bereits in der Industrie als magnetische Speicher und Leseköpfe verwendet. Die Qualität der GMR-Bauteile kann durch die Entwicklung von neuen magnetischen Materialien aber auch durch Verkleinerung, also Nutzung der Nanoskala verbessert wer- den. Zu den gewünschten charakteristischen Eigenschaften dieser neuen Materialien zählen eine höhere Spinpolarisation, höher erreichbare Curie-Temperaturen und eine verbesserte Spinfi tion. Halbmetalle, wie z.B., Heusler-Legierungen, Perovskite oder auch doppeloxide sind hierfür gute Kandidaten, weil von ihnen eine hohe Polarisierbarkeit erwartet wird. Die Bauteile, die in dieser Arbeit diskutiert werden, bestehen aus einer NiMnSb-Heusler-Legierung und Permalloy als ferromagnetische Schichten getrennt durch Cu als nichtmagnetische Schicht. Die Dissertation beinhaltet hauptsächlich zwei Aspekte nämlich die Herstellung und Charakterisierung von Nanosäulen. Die benutzte Schichtung zur Herstellung ist Ru/Py/Cu /NiMnSb, welche mittels MBE (molecular beam epitaxy) auf einem InP-Substrat mit einem (In,Ga)As-Puff gewachsen ist. Eine neue Herstellungsmethode, welche Metallmasken gegenüber der früher in unserer Arbeitsgruppe gängigen Methode (Verwendung von Resistmasken) nutzt, um eine erhöhte Probenfunktionalität zu erreichen, wird im Detail diskutiert. Ebenso werden die Vorteile dieser neuen Methode und das Detail der alten Methode vollständig in Kapitel 3 erläutert. Im Fokus des zweiten Teils (Kapitel 4 und 5) stehen elektrische Messungen und Charakterisierung der Nanos¨aulen im Hinblick auf den GMR und den Spintransfer-Moment-Messungen (SST). In Kapitel 4 werden die Ergebnisse der Strommessungen, die senkrecht zur GMR-Ebene (CPP-GMR) bei verschiedenen Temperaturen und eines in der Ebene angelegten Magnetfeldes durchgeführt wurden vorgestellt zudem wird die Abhängigkeit des CPP-GMR von Bias-Strömen und von der Formanisotropy der Bauteile untersucht. Ergebnisse dieser Messungen zeigen, dass die Bauteile eine groe Formanisotropy aufweisen. In den darauffolgenden Kapiteln werden Spintransfer-Moment Messungen, die durch magnetisches Schalten in den Bauteilen hervorgerufen wurden besprochen. Kritische Stromdichten liegen in der Größenordnung 106 A/cm2, welche eine Größenordnung kleiner ist als der aktuelle Industriestandard. Unsere Ergebnisse zeigen eine starke Abhängigkeit der zwei magnetischen Konfigurationsmöglichkeiten der Nanosäulen (parallel und anti- parallel) von dem in-plane Magnetfeld. Schließlich wurden vier magnetische Feldbereiche, basierend auf der Stabilität der magnetischen Konfiguration (P stabil, AP stabil, P und AP stabil, P und AP instabil) identifiziert. KW - Giantmagnetoresistance KW - spin-transfer torque KW - Heusler KW - CPP-GMR KW - Spin-Transfer-Drehmoment KW - Heusler KW - Riesenmagnetowiderstand KW - Spintronik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-102226 ER - TY - THES A1 - Rewitz, Christian T1 - Far-Field Characterization and Control of Propagating Ultrashort Optical Near Fields T1 - Fernfeld-Charakterisierung und Steuerung von propagierenden ultrakurzen optischen Nahfeldern N2 - In this work, femtosecond laser pulses are used to launch optical excitations on different nanostructures. The excitations are confined below the diffraction limit and propagate along the nanostructures. Fundamental properties of these ultrashort optical near fields are determined by characterizing the far-field emission after propagation with a setup developed for this task. Furthermore, control of the nanooptical excitations' spatial and temporal evolution is demonstrated for a designed nanostructure. N2 - In dieser Arbeit werden Femtosekunden-Laserpulse verwendet, um optische Moden auf verschiedenen Nanostrukturen anzuregen. Die optische Energie ist dabei unterhalb des Beugungslimits lokalisiert und die Anregungen propagieren entlang der Nanostrukturen. Grundlegende Eigenschaften dieser ultrakurzen optischen Nahfelder werden durch die Charakterisierung der Fernfeld-Emission nach der Propagation bestimmt. Dabei wird eine Messmethode verwendet die eigens für diese Aufgabe entwickelt wurde. Darüber hinaus wird die Steuerung der räumlichen und zeitlichen Entwicklung der nanooptischen Anregungen auf einer für diesen Zweck entworfenen Nanostruktur demonstriert. KW - Nahfeldoptik KW - Ultrakurzer Lichtimpuls KW - Nanooptics KW - Surface plasmons KW - Ultrafast spectroscopy KW - Interference microscopy KW - Scanning microscopy KW - Ultrafast information processing KW - Plasmonics KW - Plasmon propagation KW - plasmon group velocity KW - plasmonic waveguides KW - Oberflächenplasmonresonanz KW - Optische Spektroskopie KW - Konfokale Mikroskopie KW - Spektrale Interferenz Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-94887 ER - TY - JOUR A1 - Moffet, R. C. A1 - Rödel, R. C. A1 - Kelly, S. T. A1 - Yu, X. Y. A1 - Carroll, G. T. A1 - Fast, J. A1 - Zaveri, R. A. A1 - Laskin, A. A1 - Gilles, M. K. T1 - Spectro-microscopic measurements of carbonaceous aerosol aging in Central California JF - Atmospheric Chemistry and Physics N2 - Carbonaceous aerosols are responsible for large uncertainties in climate models, degraded visibility, and adverse health effects. The Carbonaceous Aerosols and Radiative Effects Study (CARES) was designed to study carbonaceous aerosols in the natural environment of the Central Valley, California, and learn more about their atmospheric formation and aging. This paper presents results from spectro-microscopic measurements of carbonaceous particles collected during CARES at the time of a pollution accumulation event (27-29 June 2010), when in situ measurements indicated an increase in the organic carbon content of aerosols as the Sacramento urban plume aged. Computer-controlled scanning electron microscopy coupled with an energy dispersive X-ray detector (CCSEM/EDX) and scanning transmission X-ray microscopy coupled with near-edge X-ray absorption spectroscopy (STXM/NEXAFS) were used to probe the chemical composition and morphology of individual particles. It was found that the mass of organic carbon on individual particles increased through condensation of secondary organic aerosol. STXM/NEXAFS indicated that the number fraction of homogenous organic particles lacking inorganic inclusions (greater than similar to 50 nm equivalent circular diameter) increased with plume age, as did the organic mass per particle. Comparison of the CARES spectro-microscopic dataset with a similar dataset obtained in Mexico City during the MILAGRO campaign showed that fresh particles in Mexico City contained three times as much carbon as those sampled during CARES. The number fraction of soot particles at the Mexico City urban site (ranging from 16.6 to 47.3 %) was larger than at the CARES urban site (13.4-15.7%), and the most aged samples from CARES contained fewer carbon-carbon double bonds. Differences between carbonaceous particles in Mexico City and California result from different sources, photochemical conditions, gas phase reactants, and secondary organic aerosol precursors. The detailed results provided by these spectro-microscopic measurements will allow for a comprehensive evaluation of aerosol process models used in climate research. KW - photochemical air-pollution KW - Mexico City KW - black carbon KW - mixing state KW - atmospheric aerosols Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121827 SN - 1680-7324 VL - 13 IS - 20 ER - TY - JOUR A1 - König, Markus A1 - Baenninger, Matthias A1 - Garcia, Andrei G. F. A1 - Harjee, Nahid A1 - Pruitt, Beth L. A1 - Ames, C. A1 - Leubner, Philipp A1 - Brüne, Christoph A1 - Buhmann, Hartmut A1 - Molenkamp, Laurens W. A1 - Goldhaber-Gordon, David T1 - Spatially Resolved Study of Backscattering in the Quantum Spin Hall State JF - Physical Review X N2 - The discovery of the quantum spin Hall (QSH) state, and topological insulators in general, has sparked strong experimental efforts. Transport studies of the quantum spin Hall state have confirmed the presence of edge states, showed ballistic edge transport in micron-sized samples, and demonstrated the spin polarization of the helical edge states. While these experiments have confirmed the broad theoretical model, the properties of the QSH edge states have not yet been investigated on a local scale. Using scanning gate microscopy to perturb the QSH edge states on a submicron scale, we identify well-localized scattering sites which likely limit the expected nondissipative transport in the helical edge channels. In the micron-sized regions between the scattering sites, the edge states appear to propagate unperturbed, as expected for an ideal QSH system, and are found to be robust against weak induced potential fluctuations. KW - mesoscopics KW - topological insulators KW - transport KW - charge KW - wells KW - branched flow KW - nanostructures Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-127225 SN - 2160-3308 VL - 3 IS - 2 ER - TY - JOUR A1 - Dasenbrook, Elliot C. A1 - Lu, Luan A1 - Donnola, Shannon A1 - Weaver, David E. A1 - Gulani, Viskas A1 - Jakob, Peter M. A1 - Konstan, Michael W. A1 - Flask, Chris A. T1 - Normalized T1 Magnetic Resonance Imaging for Assessment of Regional Lung Function in Adult Cystic Fibrosis Patients - A Cross-Sectional Study JF - PLOS ONE N2 - Background: Cystic fibrosis (CF) patients would benefit from a safe and effective tool to detect early-stage, regional lung disease to allow for early intervention. Magnetic Resonance Imaging (MRI) is a safe, non-invasive procedure capable of providing quantitative assessments of disease without ionizing radiation. We developed a rapid normalized T1 MRI technique to detect regional lung disease in early-stage CF patients. Materials and Methods: Conventional multislice, pulmonary T1 relaxation time maps were obtained for 10 adult CF patients with normal spirometry and 5 healthy non-CF control subjects using a rapid Look-Locker MRI acquisition (5 seconds/imaging slice). Each lung absolute T1 map was separated into six regions of interest (ROI) by manually selecting upper, central, and lower lung regions in the left and right lungs. In order to reduce the effects of subject-to-subject variation, normalized T1 maps were calculated by dividing each pixel in the absolute T1 maps by the mean T1 time in the central lung region. The primary outcome was the differences in mean normalized T1 values in the upper lung regions between CF patients with normal spirometry and healthy volunteers. Results: Normalized T1 (nT1) maps showed visibly reduced subject-to-subject variation in comparison to conventional absolute T1 maps for healthy volunteers. An ROI analysis showed that the variation in the nT1 values in all regions was <= 2% of the mean. The primary outcome, the mean (SD) of the normalized T1 values in the upper right lung regions, was significantly lower in the CF subjects [.914 (.037)] compared to the upper right lung regions of the healthy subjects [.983 (.003)] [difference of .069 (95% confidence interval .032-.105); p=.001). Similar results were seen in the upper left lung region. Conclusion: Rapid normalized T1 MRI relaxometry obtained in 5 seconds/imaging slice may be used to detect regional early-stage lung disease in CF patients. KW - infants KW - disease KW - ventilation KW - infection KW - guidelines KW - diagnosis KW - children Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128346 SN - 1932-6203 VL - 8 IS - 9 ER - TY - JOUR A1 - Okada, Michio A1 - Rotenberg, Eli A1 - Kevan, S. D. A1 - Schäfer, J. A1 - Ujfalussy, Balazs A1 - Stocks, G. Malcolm A1 - Genatempo, B. A1 - Bruno, E. A1 - Plummer, E. W. T1 - Evolution of the electronic structure in \(Mo_{1-x}Re_x\) alloys JF - New Journal of Physics N2 - We report a detailed experimental and theoretical study of the electronic structure of \(Mo_{1-x}Re_x\) random alloys. We have measured electronic band dispersions for clean and hydrogen-covered \(Mo_{1-x}Re_x\) ( 110) with x = 0-0.25 using angle-resolved photoemission spectroscopy. Our results suggest that the bulk and most surface electronic bands shift relative to the Fermi level systematically and approximately rigidly with Re concentration. We distinguish and quantify two contributions to these shifts: a raise of the Fermi energy and an increase of the overall bandwidth. Alloy bands calculated using the first-principles Korringa-Kohn-Rostoker coherent-potential-approximation method accurately predict both of these effects. As derived from the rigid band model, the Fermi energy shift is inversely related to the bulk density of states in this energy region. Using our results, we also characterize an electronic topological transition of the bulk Fermi surface and relate this to bulk transport properties. Finally, we distinguish effects beyond the rigid band approximation: a highly surface-localized state and a composition-dependent impact of the spin-orbit interaction. KW - topological transitions KW - surface state KW - metals KW - total energy KW - W(110) KW - hydrogen KW - mo KW - superconductivity KW - spectra KW - coherent potential approximation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-122993 SN - 1367-2630 VL - 15 IS - 093010 ER - TY - JOUR A1 - Kasprzak, J. A1 - Sivalertporn, K. A1 - Albert, F. A1 - Schneider, C. A1 - Höfling, S. A1 - Kamp, M. A1 - Forchel, A. A1 - Muljarov, E. A. A1 - Langbein, W. T1 - Coherence dynamics and quantum-to-classical crossover in an exciton-cavity system in the quantum strong coupling regime JF - New Journal of Physics N2 - Interaction between light and matter generates optical nonlinearities, which are particularly pronounced in the quantum strong coupling regime. When a single bosonic mode couples to a single fermionic mode, a Jaynes-Cummings (JC) ladder is formed, which we realize here using cavity photons and quantum dot excitons. We measure and model the coherent anharmonic response of this strongly coupled exciton-cavity system at resonance. Injecting two photons into the cavity, we demonstrate a \(\sqrt 2\) larger polariton splitting with respect to the vacuum Rabi splitting. This is achieved using coherent nonlinear spectroscopy, specifically four-wave mixing, where the coherence between the ground state and the first (second) rung of the JC ladder can be interrogated for positive (negative) delays. With increasing excitation intensity and thus rising average number of injected photons, we observe spectral signatures of the quantum-to-classical crossover of the strong coupling regime. KW - Jaynes-Cummings ladder KW - spectral interferometry KW - photon KW - dot KW - spectroscopy KW - oscillations KW - microcavity KW - resonance KW - light Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123005 SN - 1367-2630 VL - 15 IS - 045013 ER - TY - JOUR A1 - Kim, N. Y. A1 - Kusudo, K. A1 - Löffler, A. A1 - Höfling, S. A1 - Forchel, A. A1 - Yamamoto, Y. T1 - Exciton-polariton condensates near the Dirac point in a triangular lattice JF - New Journal of Physics N2 - Dirac particles, massless relativistic entities, obey linear energy dispersions and hold important implications in particle physics. The recent discovery of Dirac fermions in condensed matter systems including graphene and topological insulators has generated a great deal of interest in exploring the relativistic properties associated with Dirac physics in solid-state materials. In addition, there are stimulating research activities to engineer Dirac particles, elucidating their exotic physical properties in a controllable setting. One of the successful platforms is the ultracold atom-optical lattice system, whose dynamics can be manipulated and probed in a clean environment. A microcavity exciton-polariton-lattice system offers the advantage of forming high-orbital condensation in non-equilibrium conditions, which enables one to explore novel quantum orbital order in two dimensions. In this paper, we experimentally construct the band structures near Dirac points, the vertices of the first hexagonal Brillouin zone with exciton-polariton condensates trapped in a triangular lattice. Due to the finite spectral linewidth, the direct map of band structures at Dirac points is elusive; however, we identify the linear part above Dirac points and its associated velocity value is similar to ~0.9-2 x \(10^8 cm s^{-1}\), consistent with the theoretical estimate \(1 x 10^8 cm s^{-1}\) with a \(2 \mu m\) lattice constant. We envision that the exciton-polariton condensates in lattices would be a promising solid-state platform, where the system order parameter can be accessed in both real and momentum spaces. KW - Bose-Einstein condensation KW - carbon nanotubes KW - graphene KW - electron KW - dynamics KW - fermions KW - trap KW - gas Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123103 SN - 1367-2630 VL - 15 IS - 035032 ER - TY - JOUR A1 - Hopfmann, C. A1 - Albert, F. A1 - Schneider, C. A1 - Höfling, S. A1 - Kamp, M. A1 - Forchel, A. A1 - Kanter, I. A1 - Reizenstein, S. T1 - Nonlinear emission characteristics of quantum dot-micropillar lasers in the presence of polarized optical feedback JF - New Journal of Physics N2 - We report on electrically pumped quantum dot-microlasers in the presence of polarized self-feedback. The high-\(\beta\) microlasers show two orthogonal, linearly polarized emission modes which are coupled via the common gain medium. This coupling is explained in terms of gain competition between the two lasing modes and leads to distinct differences in their input-output characteristics. By applying polarized self-feedback via an external mirror, we are able to control the laser characteristics of the emission modes in terms of the output power, the coherence time and the photon statistics. We find that linearly polarized self-feedback stabilizes the lasing of a given mode, while cross-polarized feedback between the two modes reduces strongly the intensity of the other emission mode showing particular high-intensity fluctuations and even super-thermal values of the photon autocorrelation function \(g^{(2)} (\tau)\) at zero delay. Measurements of \(g^{(2)} (\tau)\) under external feedback also allow us to detect revival peaks associated with the round trip time of the external cavity. Analyzing the damping and shape of the \(g^{(2)} (\tau)\) revival peaks by a phenomenological model provides us insight into the underlying physics such as the effective exciton lifetime and gain characteristics of the quantum dots in the active region of these microlasers. KW - semiconductor lasers KW - coherence KW - system KW - gain Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123127 SN - 1367-2630 VL - 15 IS - 025030 ER - TY - THES A1 - Schmitt, Peter T1 - MR imaging of tumors: Approaches for functional and fast morphological characterization T1 - MR-Bildgebung von Tumoren: Ansätze zur funktionellen und schnellen morphologischen Charakterisierung N2 - The subject of this work was to develop, implement, optimize and apply methods for quantitative MR imaging of tumors. In the context of functional and physiological characterization, this implied transferring techniques established in tumor model research to human subjects and assessing their feasibility for use in patients. In the context of the morphologic assessment and parameter imaging of tumors, novel concepts and techniques were developed, which facilitated the simultaneous quantification of multiple MR parameters, the generation of “synthetic” MR images with various contrasts, and the fast single-shot acquisition of purely T2-weighted images. N2 - Gegenstand dieser Arbeit war die Entwicklung, Implementierung, Optimierung und Anwendung von Methoden für die quantitative MR-Bildgebung an Tumoren. In Bezug auf eine funktionelle und physiologische Charakterisierung wurden in der Forschung an Tumormodellen etablierte Verfahren für den Einsatz am Menschen adaptiert und ihre Anwendbarkeit zur Untersuchung von Tumoren wurde an Patienten erforscht. Im Bereich der morphologischen Untersuchung und Parameterbildgebung an Tumoren wurden neue Konzepte und Verfahren entwickelt, welche die simultane Quantifizierung mehrerer MR-Parameter, die Generierung "synthetischer" MR-Bilder mit unterschiedlichen Kontrasten, sowie die schnelle "Single-Shot"-Akquisition rein T2-gewichteter Bilder ermöglichen. KW - Kernspintomografie KW - Tumor KW - MR imaging KW - Tumors KW - Relaxometry KW - IR-TrueFISP KW - synthetic MRI KW - TOSSI Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-135967 ER - TY - JOUR A1 - Arca, Francesco A1 - Tedde, Sandro F. A1 - Sramek, Maria A1 - Rauh, Julia A1 - Lugli, Paolo A1 - Hayden, Oliver T1 - Interface Trap States in Organic Photodiodes JF - Scientific Reports N2 - Organic semiconductors are attractive for optical sensing applications due to the effortless processing on large active area of several \(cm^2\), which is difficult to achieve with solid-state devices. However, compared to silicon photodiodes, sensitivity and dynamic behavior remain a major challenge with organic sensors. Here, we show that charge trapping phenomena deteriorate the bandwidth of organic photodiodes (OPDs) to a few Hz at low-light levels. We demonstrate that, despite the large OPD capacitances of similar to 10 nF \(cm^{-2}\), a frequency response in the kHz regime can be achieved at light levels as low as 20 nW \(cm^{-2}\) by appropriate interface engineering, which corresponds to a 1000-fold increase compared to state-of-the-art OPDs. Such device characteristics indicate that large active area OPDs are suitable for industrial sensing and even match medical requirements for single X-ray pulse detection in the millisecond range. KW - ultrafast photonics KW - materials for optics KW - electrical and electronic engineering KW - polymers Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131507 VL - 3 ER - TY - JOUR T1 - Measurement of hard double-parton interactions in W(→ℓν) + 2-jet events at \(\sqrt{s}=7\) TeV with the ATLAS detector JF - New Journal of Physics N2 - The production of W bosons in association with two jets in proton–proton collisions at a centre-of-mass energy of \(\sqrt{s}=7\),TeV has been analysed for the presence of double-parton interactions using data corresponding to an integrated luminosity of \(36 pb^{−1}\), collected with the ATLAS detector at the Large Hadron Collider. The fraction of events arising from double-parton interactions, \(f^D_{DP}\), has been measured through the pT balance between the two jets and amounts to \(f^D_{DP}\) = 0.08 ± 0.01 (stat.) ± 0.02 (sys.) for jets with transverse momentum \(p_T\) > 20 GeV and rapidity |y| < 2.8. This corresponds to a measurement of the effective area parameter for hard double-parton interactions of \(\sigma_{eff} = 15 ± 3 (stat.)^{+5}_{−3} (sys.)\) mb. KW - hard double-patron interactions Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131531 VL - 15 IS - 033038 ER - TY - JOUR T1 - Search for extra dimensions in diphoton events from proton–proton collisions at \(\sqrt {s} = 7\)  TeV in the ATLAS detector at the LHC JF - New Journal of Physics N2 - The large difference between the Planck scale and the electroweak scale, known as the hierarchy problem, is addressed in certain models through the postulate of extra spatial dimensions. A search for evidence of extra spatial dimensions in the diphoton channel has been performed using the full set of proton–proton collisions at \(\sqrt {s} = 7\) TeV recorded in 2011 with the ATLAS detector at the CERN Large Hadron Collider. This dataset corresponds to an integrated luminosity of \(4.9 fb^{−1}\). The diphoton invariant mass spectrum is observed to be in good agreement with the Standard Model expectation. In the context of the model proposed by Arkani–Hamed, Dimopoulos and Dvali, 95% confidence level lower limits of between 2.52 and 3.92 TeV are set on the ultraviolet cutoff scale MS depending on the number of extra dimensions and the theoretical formalism used. In the context of the Randall–Sundrum model, a lower limit of 2.06 (1.00) TeV at 95% confidence level is set on the mass of the lightest graviton for couplings of \(k/\overline {M}_{Pl} = 0.1 (0.01)\). Combining with the ATLAS dilepton searches based on the 2011 data, the 95% confidence level lower limit on the Randall–Sundrum graviton mass is further tightened to 2.23 (1.03) TeV for \(k/\overline {M}_{Pl} = 0.1 (0.01)\). KW - diphoton events KW - proton-proton collision Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131548 VL - 15 ER - TY - JOUR A1 - Weibel, Stephanie A1 - Basse-Luesebrink, Thomas Christian A1 - Hess, Michael A1 - Hofmann, Elisabeth A1 - Seubert, Carolin A1 - Langbein-Laugwitz, Johanna A1 - Gentschev, Ivaylo A1 - Sturm, Volker Jörg Friedrich A1 - Ye, Yuxiang A1 - Kampf, Thomas A1 - Jakob, Peter Michael A1 - Szalay, Aladar A. T1 - Imaging of Intratumoral Inflammation during Oncolytic Virotherapy of Tumors by \(^{19}\)F-Magnetic Resonance Imaging (MRI) JF - PLoS ONE N2 - Background Oncolytic virotherapy of tumors is an up-coming, promising therapeutic modality of cancer therapy. Unfortunately, non-invasive techniques to evaluate the inflammatory host response to treatment are rare. Here, we evaluate \(^{19}\)F magnetic resonance imaging (MRI) which enables the non-invasive visualization of inflammatory processes in pathological conditions by the use of perfluorocarbon nanoemulsions (PFC) for monitoring of oncolytic virotherapy. Methodology/Principal Findings The Vaccinia virus strain GLV-1h68 was used as an oncolytic agent for the treatment of different tumor models. Systemic application of PFC emulsions followed by \(^1H\)/\(^{19}\)F MRI of mock-infected and GLV-1h68-infected tumor-bearing mice revealed a significant accumulation of the \(^{19}\)F signal in the tumor rim of virus-treated mice. Histological examination of tumors confirmed a similar spatial distribution of the \(^{19}\)F signal hot spots and \(CD68^+\)-macrophages. Thereby, the \(CD68^+\)-macrophages encapsulate the GFP-positive viral infection foci. In multiple tumor models, we specifically visualized early inflammatory cell recruitment in Vaccinia virus colonized tumors. Furthermore, we documented that the \(^{19}\)F signal correlated with the extent of viral spreading within tumors. Conclusions/Significance These results suggest \(^{19}\)F MRI as a non-invasive methodology to document the tumor-associated host immune response as well as the extent of intratumoral viral replication. Thus, \(^{19}\)F MRI represents a new platform to non-invasively investigate the role of the host immune response for therapeutic outcome of oncolytic virotherapy and individual patient response. KW - inflammation KW - fluorescence microscopy KW - oncolytic viruses KW - fluorescence imaging KW - macrophages KW - magnetic resonance imaging KW - histology KW - in vivo imaging Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130311 VL - 8 IS - 3 ER - TY - JOUR T1 - Search for excited electrons and muons in \(\sqrt {s}=8\) TeV proton–proton collisions with the ATLAS detector JF - New Journal of Physics N2 - The ATLAS detector at the Large Hadron Collider is used to search for excited electrons and excited muons in the channel \(pp →ℓℓ^\ast→ℓℓ\gamma \), assuming that excited leptons are produced via contact interactions. The analysis is based on \(13 fb^{−1}\) of pp collisions at a centre-of-mass energy of 8 TeV. No evidence for excited leptons is found, and a limit is set at the 95% credibility level on the cross section times branching ratio as a function of the excitedlepton mass \(m_{ℓ^\ast}\) . For \(m_{ℓ^\ast}\) ≽0.8 TeV, the respective upper limits on \(\sigma B(ℓ→ ℓ\gamma)\) are 0.75 and 0.90 fb for the \(e^\ast\) and \(μ^\ast\) searches. Limits on \(\sigma B\) are converted into lower bounds on the compositeness scale \(\Lambda\). In the special case where \(\Lambda = m_{ℓ^\ast}\), excited-electron and excited-muon masses below 2.2 TeV are excluded. KW - excited electrons KW - muons Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131557 VL - 15 IS - 093011 ER - TY - JOUR T1 - Search for WH production with a light Higgs boson decaying to prompt electron-jets in proton–proton collisions at \(\sqrt {s}=7\)  TeV with the ATLAS detector JF - New Journal of Physics N2 - A search is performed for WH production with a light Higgs boson decaying to hidden-sector particles resulting in clusters of collimated electrons, known as electron-jets. The search is performed with \(2.04 fb^{−1}\) of data collected in 2011 with the ATLAS detector at the Large Hadron Collider in proton–proton collisions at \(\sqrt {s}=7 TeV\) . One event satisfying the signal selection criteria is observed, which is consistent with the expected background rate. Limits on the product of the WH production cross section and the branching ratio of a Higgs boson decaying to prompt electron-jets are calculated as a function of a Higgs boson mass in the range from 100 to 140 GeV. KW - Higgs boson Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131565 VL - 15 IS - 043009 ER - TY - JOUR A1 - Oostinga, Jeroen B. A1 - Maier, Luis A1 - Schüffelgen, Peter A1 - Knott, Daniel A1 - Ames, Christopher A1 - Brüne, Christoph A1 - Tkachov, Grigory A1 - Buhmann, Hartmut A1 - Molenkamp, Laurens W. T1 - Josephson Supercurrent through the Topological Surface States of Strained Bulk HgTe JF - Physical Review X N2 - Strained bulk HgTe is a three-dimensional topological insulator, whose surface electrons have a high mobility (~ 30 000 cm\(^2\)=Vs), while its bulk is effectively free of mobile charge carriers. These properties enable a study of transport through its unconventional surface states without being hindered by a parallel bulk conductance. Here, we show transport experiments on HgTe-based Josephson junctions to investigate the appearance of the predicted Majorana states at the interface between a topological insulator and a superconductor. Interestingly, we observe a dissipationless supercurrent flow through the topological surface states of HgTe. The current-voltage characteristics are hysteretic at temperatures below 1 K, with critical supercurrents of several microamperes. Moreover, we observe a magnetic-field-induced Fraunhofer pattern of the critical supercurrent, indicating a dominant \(2\pi\)-periodic Josephson effect in the unconventional surface states. Our results show that strained bulk HgTe is a promising material system to get a better understanding of the Josephson effect in topological surface states, and to search for the manifestation of zero-energy Majorana states in transport experiments. KW - topological insulators KW - mesoscopics KW - superconductivity Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129834 VL - 3 IS - 021007 ER - TY - JOUR A1 - Nordbeck, Peter A1 - Bönhof, Leoni A1 - Hiller, Karl-Heinz A1 - Voll, Sabine A1 - Arias-Loza, Paula A1 - Seidlmaier, Lea A1 - Williams, Tatjana A1 - Ye, Yu-Xiang A1 - Gensler, Daniel A1 - Pelzer, Theo A1 - Ertl, Georg A1 - Jakob, Peter M. A1 - Bauer, Wolfgang R. A1 - Ritter, Oliver T1 - Impact of Thoracic Surgery on Cardiac Morphology and Function in Small Animal Models of Heart Disease: A Cardiac MRI Study in Rats JF - PLoS ONE N2 - Background Surgical procedures in small animal models of heart disease might evoke alterations in cardiac morphology and function. The aim of this study was to reveal and quantify such potential artificial early or long term effects in vivo, which might account for a significant bias in basic cardiovascular research, and, therefore, could potentially question the meaning of respective studies. Methods Female Wistar rats (n = 6 per group) were matched for weight and assorted for sham left coronary artery ligation or control. Cardiac morphology and function was then investigated in vivo by cine magnetic resonance imaging at 7 Tesla 1 and 8 weeks after the surgical procedure. The time course of metabolic and inflammatory blood parameters was determined in addition. Results Compared to healthy controls, rats after sham surgery showed a lower body weight both 1 week (267.5±10.6 vs. 317.0±11.3 g, n<0.05) and 8 weeks (317.0±21.1 vs. 358.7±22.4 g, n<0.05) after the intervention. Left and right ventricular morphology and function were not different in absolute measures in both groups 1 week after surgery. However, there was a confined difference in several cardiac parameters normalized to the body weight (bw), such as myocardial mass (2.19±0.30/0.83±0.13 vs. 1.85±0.22/0.70±0.07 mg left/right per g bw, p<0.05), or enddiastolic ventricular volume (1.31±0.36/1.21±0.31 vs. 1.14±0.20/1.07±0.17 µl left/right per g bw, p<0.05). Vice versa, after 8 weeks, cardiac masses, volumes, and output showed a trend for lower values in sham operated rats compared to controls in absolute measures (782.2±57.2/260.2±33.2 vs. 805.9±84.8/310.4±48.5 mg, p<0.05 for left/right ventricular mass), but not normalized to body weight. Matching these findings, blood testing revealed only minor inflammatory but prolonged metabolic changes after surgery not related to cardiac disease. Conclusion Cardio-thoracic surgical procedures in experimental myocardial infarction cause distinct alterations upon the global integrity of the organism, which in the long term also induce circumscribed repercussions on cardiac morphology and function. This impact has to be considered when analyzing data from respective animal studies and transferring these findings to conditions in patients. KW - heart rate KW - body weight KW - surgical and invasive medical procedures KW - magnetic resonance imaging KW - blood KW - vascular surgery KW - myocardial infarction KW - cardiac ventricles Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130064 VL - 8 IS - 8 ER - TY - JOUR A1 - Thierschmann, H. A1 - Henke, M. A1 - Knorr, J. A1 - Maier, L. A1 - Heyn, C. A1 - Hansen, W. A1 - Buhmann, H. A1 - Molenkamp, L. W. T1 - Diffusion thermopower of a serial double quantum dot JF - New Journal of Physics N2 - We have experimentally studied the diffusion thermopower of a serial double quantum dot, defined electrostatically in a GaAs/AlGaAs heterostructure. We present the thermopower stability diagram for a temperature difference 1T = (20±10)mK across the device and find a maximum thermovoltage signal of several μV in the vicinity of the triple points. Along a constant energy axis in this regime, the data show a characteristic pattern which is in agreement with Mott’s relation and can be well understood within a model of sequential transport. KW - quantum dot Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129714 VL - 15 IS - 123010 ER - TY - JOUR A1 - Bentmann, Hendrik A1 - Reinert, Friedrich T1 - Enhancing and reducing the Rashba-splitting at surfaces by adsorbates: Na and Xe on Bi/Cu(111) JF - New Journal of Physics N2 - The surface alloy Bi/Cu(111) shows a paradigmatic free-electron-like surface state with a very large Rashba-type spin–orbit splitting. Using angle-resolved photoemission we investigate how adsorbates of different chemical nature influence the size of the spin splitting in this system. We find that the adsorption of small amounts of monovalent Na atoms leads to an enhancement of the spin splitting while an overlayer of the closed-shell rare gas Xe causes a reduction. The latter result is in contrast to the Au(111) surface for which an increased splitting size after Xe-adsorption was observed. We discuss these experimental findings in terms of the characteristic differences of the surface state wave functions and their spatial deformation in the presence of different types of adsorbates. Our results provide insight into the complex interplay of atomic and interface potential gradients governing the Rashba effect. KW - Rashba-Splitting Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129722 VL - 15 IS - 115011 ER - TY - JOUR A1 - Scholz, M. A1 - Sauer, C. A1 - Wiessner, M. A1 - Nguyen, N. A1 - Scholl, A. A1 - Reinert, F. T1 - Structure formation in organic thin films observed in real time by energy dispersive near-edge x-ray absorption fine-structure spectroscopy JF - New Journal of Physics N2 - We study the structure formation of 1,4,5,8-naphthalenetetracarboxylicacid- dianhydride (NTCDA) multilayer films on Ag(111) surfaces by energy dispersive near-edge x-ray absorption fine-structure spectroscopy (NEXAFS) and photoelectron spectroscopy. The time resolution of seconds of the method allows us to identify several sub-processes, which occur during the post-growth three-dimensional structural ordering, as well as their characteristic time scales. After deposition at low temperature the NTCDA molecules are preferentially flat lying and the films exhibit no long-range order. Upon annealing the molecules flip into an upright orientation followed by an aggregation in a transient phase which exists for several minutes. Finally, threedimensional islands are established with bulk-crystalline structure involving substantial mass transport on the surface and morphological roughening. By applying the Kolmogorov–Johnson–Mehl–Avrami model the activation energies of the temperature-driven sub-processes can be derived from the time evolution of the NEXAFS signal. KW - physics Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129749 VL - 15 IS - 083052 ER - TY - JOUR A1 - Astakhov, Georgy V. A1 - Fuchs, F. A1 - Soltamov, V. A. A1 - Väth, S. A1 - Baranov, P. G. A1 - Mokhov, E. N. A1 - Dyakonov, V. T1 - Silicon carbide light-emitting diode as a prospective room temperature source for single photons JF - Scientific Reports N2 - Generation of single photons has been demonstrated in several systems. However, none of them satisfies all the conditions, e.g. room temperature functionality, telecom wavelength operation, high efficiency, as required for practical applications. Here, we report the fabrication of light-emitting diodes (LEDs) based on intrinsic defects in silicon carbide (SiC). To fabricate our devices we used a standard semiconductor manufacturing technology in combination with high-energy electron irradiation. The room temperature electroluminescence (EL) of our LEDs reveals two strong emission bands in the visible and near infrared (NIR) spectral ranges, associated with two different intrinsic defects. As these defects can potentially be generated at a low or even single defect level, our approach can be used to realize electrically driven single photon source for quantum telecommunication and information processing. KW - semiconductors KW - inorganic LEDs KW - quantum optics KW - nanophotonics KW - plasmonics Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96308 ER - TY - JOUR A1 - Winter, Patrick A1 - Kampf, Thomas A1 - Helluy, Xavier A1 - Gutjahr, Fabian T. A1 - Meyer, Cord B. A1 - Rommel, Eberhard A1 - Bauer, Wolfgang R. A1 - Jakob, Peter M. A1 - Herold, Volker T1 - Fast retrospectively triggered local pulse-wave velocity measurements in mice with CMR-microscopy using a radial trajectory JF - Journal of Cardiovascular Magnetic Resonance N2 - Background The aortic pulse-wave velocity (PWV) is an important indicator of cardiovascular risk. In recent studies MRI methods have been developed to measure this parameter noninvasively in mice. Present techniques require additional hardware for cardiac and respiratory gating. In this work a robust self-gated measurement of the local PWV in mice without the need of triggering probes is proposed. Methods The local PWV of 6-months-old wild-type C57BL/6J mice (n=6) was measured in the abdominal aorta with a retrospectively triggered radial Phase Contrast (PC) MR sequence using the flow-area (QA) method. A navigator signal was extracted from the CMR data of highly asymmetric radial projections with short repetition time (TR=3 ms) and post-processed with high-pass and low-pass filters for retrospective cardiac and respiratory gating. The self-gating signal was used for a reconstruction of high-resolution Cine frames of the aortic motion. To assess the local PWV the volume flow Q and the cross-sectional area A of the aorta were determined. The results were compared with the values measured with a triggered Cartesian and an undersampled triggered radial PC-Cine sequence. Results In all examined animals a self-gating signal could be extracted and used for retrospective breath-gating and PC-Cine reconstruction. With the non-triggered measurement PWV values of 2.3±0.2 m/s were determined. These values are in agreement with those measured with the triggered Cartesian (2.4±0.2 m/s) and the triggered radial (2.3±0.2 m/s) measurement. Due to the strong robustness of the radial trajectory against undersampling an acceleration of more than two relative to the prospectively triggered Cartesian sampling could be achieved with the retrospective method. Conclusion With the radial flow-encoding sequence the extraction of a self-gating signal is feasible. The retrospective method enables a robust and fast measurement of the local PWV without the need of additional trigger hardware. KW - pulse-wave velocity KW - mouse KW - self-gating KW - phase-contrast CMR KW - non-triggered KW - retrospective KW - radial KW - aorta Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96602 UR - http://jcmr-online.com/content/15/1/88 ER - TY - THES A1 - Meyer, Sebastian T1 - Model System for Correlation Phenomena in Reduced Dimensions - Gold-induced Atomic Chains on Germanium T1 - Modellsystem für Korrelationsphänomene in niedrigen Dimensionen - Gold-induzierte Atomketten auf Germanium N2 - Atomic chains, often called nanowires, form in a self-organized process after the adsorption of metal atoms. These wires are spatially well confined representing a close approach of a true one-dimensional structure. The low-dimensional architecture thereby often leads to anisotropic electronic states with vanishing interchain interaction. In the presence of weak coupling to the substrate a one-dimensional metal can experience a phase transition according to Peierls into an insulating ground state upon temperature, which is accompanied by a periodic lattice distortion. Without any coupling a strict onedimensional regime is reached, where the common Fermi liquid description breaks down with the quasi-particles being replaced by collective excitations of spin and charge. This state is referred to as a Tomonaga-Luttinger liquid (TLL), which has been observed so far only in anisotropic bulk materials. An experimental fingerprint for both phenomena can be obtained from the electronic states close to the chemical potential, i.e. the Fermi energy. Using a semiconducting substrate provides the best observation conditions since any bulk projection onto the interesting bands is avoided. In case of Au/Ge(001) the growth of gold-induced chains is guided by the dimerized bare Ge (2×1) reconstruction yielding two different domains of wires rotated by 90° going from one terrace to the next by a single height step. The superior wetting capabilities of gold on germanium enables a complete coverage of the Ge(001) surface with longrange ordered wires. Their length scale and defect density is limited by the underlying substrate, for which a cleaning procedure is introduced based on wet-chemical etching followed by thermal dry oxidation. The band structure of Au/Ge(001) is investigated by angle-resolved photoelectron spectroscopy as a function of temperature. Two states are observed: a two-dimensional metallic state with hole-like dispersion and a one-dimensional electron pocket, whose band-integrated spectral function does not show the typical Fermi distribution at the chemical potential. Instead, a decrease of spectral weight applies following a power-law. This behavior can be well explained within the Tomonaga-Luttinger liquid theory which replaces the Fermi-Landau formalism in strictly one-dimensional systems. To enable theoretical modeling, a structural analysis was performed on the basis of surface x-ray diffraction (SXRD). From the in-plane scattering data a Patterson-map could be extracted leading to in-plane distances between gold atoms in the unit cell. This provides the first step towards a complete structural model and therefore towards a band structure calculation. First successful attempts have been made to manipulate the system by controlled adsorption of potassium. Here, an n-type doping effect is observed for submonolayer coverage whereas slightly increased coverages in combination with thermal energy lead to a new surface reconstruction. N2 - Atomare Ketten, sogenannte Nano-Drähte, entstehen durch Selbstorganisation adsorbierter Metallatome auf einer Halbleiteroberfläche. Aufgrund der starken räumlichen Einschränkung der Ladungsträger innerhalb dieser Ketten entsteht dabei oftmals eine metallische Bandstruktur mit starker Anisotropie. Im Falle phononischer Ankopplung an das Substrat kann so ein eindimensionales (1D) Metall instabil gegen eine periodische Gitterverzerrung werden, bei der es zu einer Ausbildung einer Energielücke kommt. Dieser Metall-Isolator-Übergang wird dabei als Peierls Übergang bezeichnet. Für verschwindend geringe Kopplung der Ketten untereinander bzw. an das Substrat, d.h. im strikt eindimensionalen Fall, bricht das Fermi Flüssigkeitsmodell für dreidimensionale (3D) Metalle zusammen. Dessen Quasiteilchen werden durch kollektive Anregungen von Spin und Ladung ersetzt. Diesen Zustand bezeichnet man als Tomonaga-Luttinger Flüssigkeit. Beide Phänomene, Peierlsübergang und Tomonaga-Luttinger Flüssigkeit lassen sich anhand der elektronischen Bandstruktur experimentell nachweisen. Bei dem hier untersuchten Probensystem handelt es sich um Gold-induzierte Nandrähte auf der Germanium (001)-Oberfläche, kurz Au/Ge(001). Deren Wachstum erfolgt epitaktisch entlang der durch das Substrat vorgegebenen Dimer-Reihen, welche die freie Germaniumoberfläche in Form einer (2×1)-Symmetrie einnimmt. Die abwechselnde Stapelfolge ABAB des Substrates führt dabei zu zwei unterschiedlichen Drahtrichtungen, die jeweils um 90° zueinander gedreht sind, wenn man eine Einfachstufe von 1.4 A von einer A-Terrasse auf eine B-Terrasse oder umgekehrt geht. Die vorherrschende Kinetik während der Gold-Deposition bzw. das Benetzungsverhalten ermöglicht dabei eine vollständige Bedeckung der vormals freien Oberfläche mit Nanodrähten, deren Abmessungen einzig und allein durch Defekte bzw. die Größe der darunterliegenden Ge-Terrasse begrenzt sind. Um die Längenskala der Subtrat-Terrassen zu optimieren, wurde eine Reinigungsprozedur für Ge (001) entwickelt, bei der nass-chemisches Ätzen mit anschliessender Trocken-Oxidation zum Einsatz kommt. Die darauf aufbauenden Nanodrähte wurden im Anschluss mittels winkelaufgelöster Photoelektronenspektroskopie auf ihre elektronische Bandstruktur untersucht. Dabei wurden zwei neuartige Zustände beobachtet: ein metallischer, zweidimensionaler Loch-Zustand, der seinen Ursprung höchstwahrscheinlich in tieferen Schichten des Germaniums hat; und ein eindimensionaler Oberflächenzustand mit elektronenartiger Dispersion, dessen bandintegrierte Spektralfunktion von der einer Fermiflüssigkeit abweicht. Stattdessen wird ein exponentieller Abfall des spektralen Gewichtes als Funktion der Energie zum Ferminiveau hin beobachtet. Dieses Verhalten kann über einen weiten Temperaturbereich beobachtet werden und lässt sich mit der Tomonaga-Luttinger Flüssigkeit für strikt eindimensionale Systeme erklären. Zum weiteren theoretischen Verständnis dieses Phänomes, beispielsweise durch Bandstrukuturrechnungen mittels Dichte-Funktional-Theorie, bedarf es der genauen Kenntnis der atomaren Struktur dieser Ketten. Selbige wurde mittels Oberflächenröntgenbeugung (engl. surface x-ray diffraction, SXRD) untersucht. Auf Basis der gewonnenen Patterson-Karte lassen sich Rückschlüsse auf die interatomaren Abstände der Goldatome untereinander in der Einheitszelle ziehen. Dies stellt einen ersten wichtigen Schritt auf dem Weg zu einem vollständigen Strukturmodell dar. Darüber hinaus wurden erste vielversprechende Schritte unternommen, das Nanodrahtsystem kontrolliert zu manipulieren. Durch geringfügige, zusätzliche Deposition von Kalium konnte dabei eine schrittweise Erhöhung der Bandfüllung erzielt werden. Für weitergehende Kaliumanlagerungen im (Sub-)Monolagenbereich konnte sogar eine neue Rekonstruktion erzielt werden. KW - Nanodraht KW - Germanium KW - Gold KW - Elektronenflüssigkeit KW - winkelaufgelöste Photoelektronenspektroskopie KW - Self-assembly KW - Onedimensional KW - Luttinger liquid KW - angle-resolved photoemission KW - Adsorbat KW - Halbleiteroberfläche KW - Luttinger-Flüssigkeit KW - Oberflächenphysik KW - Nanowire Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-77723 ER - TY - THES A1 - Wagenpfahl, Alexander Johannes T1 - Numerical simulations on limitations and optimization strategies of organic solar cells T1 - Numerische Simulationen von Limitierungen und Optimierungsstrategien organischer Solarzellen N2 - Continuously increasing energy prices have considerably influenced the cost of living over the last decades. At the same time increasingly extreme weather conditions, drought-filled summers as well as autumns and winters with heavier rainfall and worsening storms have been reported. These are possibly the harbingers of the expected approaching global climate change. Considering the depletability of fossil energy sources and a rising distrust in nuclear power, investigations into new and innovative renewable energy sources are necessary to prepare for the coming future. In addition to wind, hydro and biomass technologies, electricity generated by the direct conversion of incident sunlight is one of the most promising approaches. Since the syntheses and detailed studies of organic semiconducting polymers and fullerenes were intensified, a new kind of solar cell fabrication became conceivable. In addition to classical vacuum deposition techniques, organic cells were now also able to be processed from a solution, even on flexible substrates like plastic, fabric or paper. An organic solar cell represents a complex electrical device influenced for instance by light interference for charge carrier generation. Also charge carrier recombination and transport mechanisms are important to its performance. In accordance to Coulomb interaction, this results in a specific distribution of the charge carriers and the electric field, which finally yield the measured current-voltage characteristics. Changes of certain parameters result in a complex response in the investigated device due to interactions between the physical processes. Consequently, it is necessary to find a way to generally predict the response of such a device to temperature changes for example. In this work, a numerical, one-dimensional simulation has been developed based on the drift-diffusion equations for electrons, holes and excitons. The generation and recombination rates of the single species are defined according to a detailed balance approach. The Coulomb interaction between the single charge carriers is considered through the Poisson equation. An analytically non-solvable differential equation system is consequently set-up. With numerical approaches, valid solutions describing the macroscopic processes in organic solar cells can be found. An additional optical simulation is used to determine the spatially resolved charge carrier generation rates due to interference. Concepts regarding organic semiconductors and solar cells are introduced in the first part of this work. All chapters are based on previous ones and logically outline the basic physics, device architectures, models of charge carrier generation and recombination as well as the mathematic and numerical approaches to obtain valid simulation results. In the second part, the simulation is used to elaborate issues of current interest in organic solar cell research. This includes a basic understanding of how the open circuit voltage is generated and which processes limit its value. S-shaped current-voltage characteristics are explained assigning finite surface recombination velocities at metal electrodes piling-up local space charges. The power conversion efficiency is identified as a trade-off between charge carrier accumulation and charge extraction. This leads to an optimum of the power conversion efficiency at moderate to high charge carrier mobilities. Differences between recombination rates determined by different interpretations of identical experimental results are assigned to a spatially inhomogeneous recombination, relevant for almost all low mobility semiconductor devices. N2 - Stetig steigende Preise für Energie haben die Lebenshaltungskosten in Deutschland über die letzten Jahrzehnte maßgeblich beeinflusst. Gleichzeitig werden scheinbar extremere Wetterbedingungen, dürrere Sommer, ebenso wie regen und sturmreichere Winter aufgezeichnet. Dies könnten bereits heute die Vorboten eines kommenden, globalen Klimawandels sein. Berücksichtigt man die Endlichkeit fossiler Energieträger und die wachsende Ablehnung gegenüber nuklearer Energieerzeugung, führt kein Weg an einer genaueren Erforschung innovativer, erneuerbarer Energiequellen vorbei. Neben Wind- und Wasserkraft stellt die direkte Umwandlung von Sonnenlicht in elektrischen Strom einen der erfolgversprechendsten Ansätze dar. Seit Beginn der Synthese und der genaueren Untersuchungen organischer, halbleitender Polymere und Fullerene innerhalb der letzten Jahre, wurde eine neue Arte der Solarzellenherstellung, neben den bereits etablierten Technologien, denkbar. Zusätzlich zu klassischen Aufdampfverfahren können Solarzellen aus organischen Materialien in Lösung hergestellt und auf verschiedenartigste Materialien wie Plastik, Stoff oder Papier aufgebracht werden. Aufgrund der Unordnung in den aktiven Schichten verhalten sich solche Solarzellen jedoch anders als solche aus anorganischen Materialien. Eine organische Solarzelle ist ein komplexes elektrisches Bauteil, welches durch eine Anzahl physikalischer Effekte maßgeblich beeinflusst wird. So ist, beispielsweise, die Verteilung erzeugter Ladungsträger durch optische Interferenzeffekte bestimmt. Ladungstransport und Ladungsträgerrekombination stellen weitere Einflussfaktoren dar. Die experimentell gemessenen Strom-Spannungs-Kennlinien sind somit stets makroskopische Kombination mehrerer Effekte. Änderungen einzelner Parameter führen zu einer komplexen Änderung des elektrischen Verhaltens des Bauteils. Folgerichtig ist es notwendig, ein Modell zu entwickeln, welches das Verhalten organischer Solarzellen bei sich ändernden Umgebungsbedingungen, allgemeingültig vorhersagen kann. Im Rahmen dieser Arbeit wurde, zu diesem Zweck, eine eindimensionale, numerische Simulation entwickelt. Basierend auf Drift- und Diffusionsgleichungen für Elektronen, Löcher und Exzitonen kann der Ladungstransport in organischen Halbleitern beschrieben werden. Benötigte Generations- und Rekombinationsraten werden durch entsprechende Ratengleichungen bestimmt. Über die Poisson-Gleichung wird zudem das auftretende elektrische Feld innerhalb der Solarzelle berücksichtigt. Das resultierende differentielle Gleichungssystem ist jedoch nicht analytisch lösbar. Nur mit Hilfe spezieller numerischer Methoden, können gültige Lösungen gefunden werden. Hiermit kann das Verhalten organischer Solarzellen sehr gut beschrieben. Eine zusätzliche optische Simulation kann dazu benutzt werden, optische Interferenzeffekte zu berücksichtigen. Im des ersten Teiles dieser Arbeit werden Methoden und Modellvorstellungen für Prozesse in organischer Solarzellen vorgestellt. Die Kapitel bauen aufeinander auf und gehen nacheinander auf die grundlegende Physik, die Bauteilarchitektur, die Modelle der Ladungsträgergeneration und -rekombination, ebenso wie auf die benötigten mathematischen und numerischen Methoden ein. Beiträge zur aktuellen Forschung werden im zweiten Abschnitt vorgestellt. Diese Umfassen ein grundlegendes Verständnis der offenen Klemmspannung organischer Solarzellen. Diese wird entweder durch Oberflächenrekombination an den Elektroden oder durch Injektionsbarrieren limitiert. S-förmige Verformungen von gemessenen und simulierten Strom-Spannungs-Kennlinien konnten durch endliche Oberflächenrekombinationsgeschwindigkeiten erklärt werden. Aufgrund verminderter Extraktions- und Injektionseigenschaften entsteht eine spannungsabhängige Raumladungszone, welche diese oft beobachtete Verformung verursacht. Der Wirkungsgrad organischer Solarzellen konnte als Kompromiss zwischen Ladungsträgeranhäufung und -extraktion im Bauteil identifiziert werden. Dies führt letztendlich zu einem Optimum der Solarzelleneffizienz bei moderaten bis hohen Ladungsträgerbeweglichkeiten. Abweichungen experimentell unterschiedlich bestimmter Rekombinationsraten konnten auf eine räumlich inhomogene Verteilung der Ladungsträgerrekombination zurückgeführt werden. Diese wird durch selektive Kontakte erzeugt und ist für alle halbleitenden Bauelemente mit niedriger Mobilität relevant. KW - Organische Solarzelle KW - Fotovoltaik KW - Organischer Halbleiter KW - s-shape KW - Doppeldiode KW - Simulation KW - Solarzelle KW - Rekombination KW - Strom-Spannungs-Kennlinie Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-90119 N1 - zu ergänzende PACS-Nummern wären: 88.40.jr und 81.05.Fb (Quelle: http://www.aip.org/publishing/pacs/pacs-alphabetical-index) ER - TY - THES A1 - Sperlich, Andreas T1 - Electron Paramagnetic Resonance Spectroscopy of Conjugated Polymers and Fullerenes for Organic Photovoltaics T1 - Elektron-Paramagnetische Resonanz-Spektroskopie von konjugierten Polymeren und Fullerenen für die organische Photovoltaik N2 - In the presented thesis, the various excited states encountered in conjugated organic semiconductors are investigated with respect to their utilization in organic thin-film solar cells. Most of these states are spin-baring and can therefore be addressed by means of magnetic resonance spectroscopy. The primary singlet excitation (spin 0), as well as positive and negative polaronic charge carriers (spin 1/2) are discussed. Additionally, triplet excitons (spin 1) and charge transfer complexes are examined, focussing on their differing spin-spin interaction strength. For the investigation of these spin-baring states especially methods of electron paramagnetic resonance (EPR) are best suited. Therefore according experimental methods were implemented in the course of this work to study conjugated polymers, fullerenes and their blends with continuous wave as well as time-resolved EPR and optically detected magnetic resonance. N2 - Die vorliegende Arbeit beschäftigt sich mit den vielfältigen Anregungszuständen in konjugierten organischen Halbleitern mit Hinblick auf deren Verwendung in organischen Dünnschicht-Solarzellen. Diese verschiedenen Zustände sind zumeist Spin-behaftet und daher mit Methoden der Magnetresonanz adressierbar. Es wird unterschieden zwischen Singulett-Exzitonen (Spin 0) als primärer Photoanregung, sowie positiven und negativen polaronischen Ladungsträgern (Spin 1/2). Des Weiteren werden Triplet-Exzitonen (Spin 1) und Ladungstransferkomplexe behandelt, die sich durch unterschiedlich starke Spin-Spin Wechselwirkung auszeichnen. Zur Untersuchung dieser Spin-behafteten Zustände bieten sich insbesondere Methoden der Elektron-Paramagnetischen Resonanz-Spektroskopie (EPR) an. Im Zuge dieser Arbeit wurden dafür entsprechede Messmethoden der Dauerstrich (cw) EPR, zeitaufgelösten, transienten EPR und der optisch detektierten Magnetresonanz (ODMR) implementiert und zur Erforschung von konjugierten Polymeren, Fullerenen und deren Mischungen eingesetzt. KW - Organische Solarzelle KW - Fotovoltaik KW - Organischer Halbleiter KW - organische Photovoltaik KW - organische Halbleiter KW - organic photovoltaic KW - organic solar cells KW - Elektronenspinresonanz KW - Fullerene KW - Konjugierte Polymere KW - Photovoltaik KW - Spektroskopie Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-81244 ER - TY - THES A1 - Ruff, Andreas T1 - On the importance of electronic correlations in potassium-doped organic semiconductors T1 - Über die Bedeutung elektronischer Korrelationen in Kalium-dotierten organischen Halbleitern N2 - The present thesis is concerned with the impact of alkali metal-doping on the electronic structure of semiconducting organic thin films. The organic molecular systems which have been studied are the polycyclic aromatic hydrocarbons picene, pentacene, and coronene. Motivated by reports about exceptional behavior like superconductivity and electronic correlations of their alkali metal-doped compounds, high quality films fabricated from the above named molecules have been studied. The electronic structure of the pristine materials and their doped compounds has been investigated using photoelectron spectroscopy. Core level and valence band studies of undoped films yield excellent photoemission spectra agreeing with or even outperforming previously reported data from the literature. Alkali metal-doping manifests itself in a uniform manner in the electronic structure for all probed samples: Opposed to reports from the literature about metallicity and even superconductivity in alkali metal-doped picene, pentacene, and coronene, all films exhibit insulating nature with an energy gap of the order of one electron-volt. Remarkably, this is independent of the doping concentration and the type of dopant, i.e., potassium, cesium, or sodium. Based on the interplay between narrow bandwidths in organic semiconductors and sufficiently high on-molecule Coulomb repulsion, the non-metallicity is attributed to the strong influence of electronic correlations leading to the formation of a Mott insulator. In the case of picene, this is consolidated by calculations using a combination of density functional theory and dynamical mean-field theory. Beyond the extensive considerations regarding electronic correlations, further intriguing aspects have been observed. The deposition of thin picene films leads to the formation of a non-equilibrium situation between substrate and film surface. Here, the establishment of a homogeneous chemical potential is hampered due to the only weak van der Waals-interactions between the molecular layers in the films. Consequently, spectral weight is measurable above the reference chemical potential in photoemission. Furthermore, it has been found that the acceptance of additional electrons in pentacene is limited. While picene and coronene are able to host up to three extra electrons, in pentacene the limit is already reached for one electron. Finally, further extrinsic effects, coming along with alkali metal-doping, have been scrutinized. The oxidation of potassium atoms induced by the reaction with molecular oxygen in the residual gas of the ultra-high vacuum system turned out to significantly influence the electronic structure of alkali metal-doped picene and coronene. Moreover, also the applied X-ray and UV irradiation caused a certain impact on the photoemission spectra. Surprisingly, both effects did not play a role in the studies of potassium-doped pentacene. N2 - Die vorliegende Arbeit beschäftigt sich mit der Dotierung organischer Dünnfilme mittels Alkalimetall-Interkalation sowie deren Einfluss auf die elektronische Struktur der Filme. Untersucht wurden zu diesem Zweck die polyzyklischen aromatischen Kohlenwasserstoffe Picen, Pentacen und Coronen. Berichte über außerordentliche Eigenschaften wie Supraleitung und elektronische Korrelationen in Alkalimetall-dotierten Verbindungen der genannten organischen Halbleiter liefern die Motivation für diese Arbeit. Die elektronische Struktur sowohl der reinen Filme als auch ihrer dotierten Verbindungen wurde unter Verwendung von Photoelektronenspektroskopie untersucht. Rumpfniveau- und Valenzband-Spektren der reinen Filme spiegeln deren hohe Qualität wider. Die Dotierung mit Alkalimetallen äußert sich für die drei untersuchten Probensysteme auf eine überraschend einheitliche Art und Weise in der elektronischen Struktur: In Diskrepanz zu Berichten aus der Literatur über Metallizität oder gar Supraleitung in Alkalimetall-dotiertem Picen, Pentacen und Coronen zeigen alle Filme isolierendes Verhalten mit einer Energielücke in der Größenordnung von einem Elektronenvolt. Dieses Verhalten tritt unabhängig von der Dotierkonzentration und der Art des Donators (Kalium, Cäsium oder Natrium) auf. Basierend auf dem Zusammenspiel schmaler Bandbreiten in organischen Halbleitern und hoher Coulomb-Abstoßung der Elektronen auf den Molekülen wird die beobachtete Nicht-Metallizität dem starken Einfluss elektronischer Korrelationen zugeschrieben. Im Fall von Picen wird diese Annahme durch theoretische Betrachtungen bekräftigt, wobei Rechnungen im Rahmen einer Kombination aus Dichtefunktionaltheorie und dynamischer Molekularfeldtheorie durchgeführt wurden. Neben den Ausführungen hinsichtlich elektronischer Korrelationen werden in dieser Arbeit weitere interessante Beobachtungen adressiert. So hat das Wachstum dünner Picen-Filme die Entstehung eines Nicht-Gleichgewichts zwischen Substrat und Filmoberfläche zur Folge: Auf Grund der nur schwachen van der Waals-Wechselwirkung zwischen den Moleküllagen der Filme wird die Ausbildung eines homogenen chemischen Potentials erschwert. Dies führt zu der unerwarteten Beobachtung von spektralem Gewicht oberhalb des chemischen Potentials des Referenzsystems. Des Weiteren konnte gefunden werden, dass die Akzeptanz zusätzlicher Elektronen in Pentacen limitiert ist. Während Picen und Coronen in der Lage sind, bis zu drei weitere Elektronen aufzunehmen, ist die entsprechende Grenze bei Pentacen schon für ein Elektron erreicht. Abschließend wurden weitere extrinsische Effekte aufgeklärt, die im Zusammenhang mit der Alkalimetall-Dotierung auftraten. Zum einen führt die Reaktion von Kalium-Atomen mit molekularem Sauerstoff im Restgas der Ultrahochvakuum-Apparatur zur Bildung von Kaliumoxid. Dies äußert sich deutlich in der elektronischen Struktur von Alkalimetall-dotiertem Picen und Coronen. Des Weiteren zeigte hier die verwendete Röntgen- sowie UV-Strahlung deutliche Auswirkungen auf die Photoemissionsspektren. Beide Effekte spielten im Fall der Studien an Pentacen keine Rolle. KW - Organischer Halbleiter KW - Dotierung KW - Kalium KW - Elektronische Korrelationen KW - organic semiconductors KW - photoemission KW - electronic correlations KW - Elektronenkorrelation KW - Kondensierte Materie KW - Halbleiter KW - Photoelektronenspektroskopie Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-83635 ER - TY - THES A1 - Pohl, Christoph T1 - Silicon Based MBE of Manganese-Silicide and Silicon-Suboxide T1 - Silizium basierte MBE von Mangansilizid und Siliziumsuboxid N2 - The present thesis deals with the fabrication, optimization of growth process and characterization of silicon based materials with molecular beam epitaxy. Two material systems are investigated in the course of this work: silicon/silicon suboxide multilayer structures and mono manganese silicide thin films. Mono manganese silicide (MnSi) is grown on Si(111) substrates with an hydrogen passivated surface, that is prepared by wet chemical processes. The growth start is performed by deposition of an amorphous Mn wetting layer that is subsequently annealed to form a MnSi seed layer on which the MnSi molecular beam epitaxy (MBE) is achieved. An amorphous or a crystalline Si cap layer is deposited onto the MnSi film to finalize the growth process and protect the sample from oxidation. With Raman spectroscopy it is shown that the crystalline cap layer is in fact single crystalline silicon. Results of x-ray diffraction and Raman spectroscopy confirm the growth of mono manganese silicide in contrast to other existing manganese silicide phases. In addition, in-plane and out-of-plane residual strain, and twinning of the MnSi thin film is detected with x-ray diffraction of symmetric and asymmetric reflections. Orientation between the Si substrate and the MnSi film is determined with the parallel lattice planes MnSi(210) and Si(511). Transport measurements show a T^2 dependence of the resistivity below 30K and metallic behavior above, a magneto resistance of 0.9% and an unusual memory like effect of the resistance for an in-plane magnetic field sweep measurement. Silicon/Silicon suboxide (SiOx) multilayer structures are grown on Si(100) by interrupting the Si growth and oxidizing the surface with molecular oxygen. During oxidation the RHEED pattern changes from the Si(2x1) reconstruction to an amorphous pattern. When silicon growth is resumed a spotty RHEED pattern emerges, indicating a rough, three dimensional surface. The rough surface can be smoothed out with Si growth at substrate temperatures between 600°C and 700°C. Measurements with transmission electron microscopy show that a silicon suboxide layer of about 1nm embedded in single crystalline silicon is formed with the procedure. Multilayer structures are achieved by repeating the oxidation procedure when the Si spacer layer has a smooth and flat surface. The oxygen content of the suboxide layers can be varied between 7.6% and 26.8%, as determined with secondary ion mass spectrometry and custom-built simulations models for the x-ray diffraction. Structural stability of the multilayer structures is investigated by x-ray diffraction before and after rapid thermal annealing. For temperatures up to 1000°C the multilayer structures show no modification of the SiOx layer in x-ray diffraction. N2 - Die vorgelegte Arbeit handelt von der Herstellung siliziumbasierter Materialien mittels Molekularstrahlepitaxie, der Charakterisierung der Proben und der Optimierung der Wachstumsprozesse. Zwei Materialsysteme werden in dieser Arbeit behandelt: Silizium/Siliziumsuboxid Vielschichtstrukturen und dünne Schichten Mono-Mangansilizid. Mono-Mangansilizid (MnSi) wird auf Wasserstoff passivierten Si(111)-Substraten gewachsen. Für den Wachstumsstart wird eine amorphe Schicht Mangan auf den Si-Wafer abgeschieden und anschließend getempert. Dieser Prozess erzeugt eine ultra dünne Schicht MnSi, die als Keimschicht für das Wachstum dient. Zum Abschluss des Wachstums wird die MnSi-Schicht mit einer amorphen oder einkristallinen Deckschicht vor dem Oxidieren an der Luft geschützt. Das einkristalline Überwachsen der MnSi-Schicht ist mittels Ramanspektroskopie bestätigt. Röntgendiffraktometrie und Ramanspektroskopie bestätigen, dass es sich bei der gewachsenen Schicht um MnSi handelt und nicht um die manganreiche oder siliziumreiche Phasen von Mangansilizid. Anhand der Röntgendiffraktometrie von symmetrischen und asymmetrischen Reflektionen wird die laterale und vertikale Restverspannung gemessen, zusätzlich wird die Entstehung von Zwillingen in der Schicht gezeigt. Die Orientierung der MnSi-Schicht relativ zum Si Substrat ist anhand der parallelen Netzebenen MnSi(210) und Si(511) bestimmt. Transportmessungen an den Schichten zeigen unterhalb von 30K eine T^2-Abhängigkeit des spezifischen Widerstands, oberhalb metallisches Verhalten. Der Magneto Widerstand der MnSi Schicht beträgt 0.9%. Bei einem Magnetfeldsweep in der Schichtebene wird ein kurioses, dem Memory-Effekt ähnliches Verhalten beobachtet. Silizium/Siliziumsuboxid (SiOx)-Vielschichtstrukturen werden auf Si(100) Substraten gewachsen. Das Siliziumwachstum wird unterbrochen und die Probenoberfläche mit molekularem Sauerstoff oxidiert. Dabei verändert sich das RHEED-Muster von der Si-(2x1) Rekonstruktion zu einem amorphen Muster. Das Siliziumwachstum wird nach der Oxidation fortgesetzt und im RHEED entsteht dabei ein Punktmuster das von einer rauen, drei-dimensionalen Oberfläche zeugt. Durch Siliziumwachstum bei Substrattemperaturen zwischen 600°C und 700°C wird die Oberfläche wieder geglättet. Aufnahmen mit dem Transmissionselektronenmikroskop zeigen, dass bei diesem Wachstum eine 1nm dicke SiOx-Schicht eingebettet zwischen einkristalline Siliziumschichten entsteht. Wenn die Siliziumoberfläche wieder glatt ist, kann durch wiederholen der Wachstumssequenz eine Vielschichtstruktur hergestellt werden. Der Sauerstoffgehalt der hergestellten Suboxidschichten wurde mittels Sekundärionen-Massenspektrometrie und eigens zu diesem Zweck angepassten Röntgendiffraktometrie-Simulationen auf 7.6% bis 26.8% bestimmt. Die strukturelle Stabilität der Proben wurde mit Röntgendiffraktometrie vor und nach kurzem Hochtemperaturtempern untersucht. Bei Temperaturen bis 1000°C kann mittels Röntgendiffraktometrie keine Änderung der Si/SiOx Vielschicht-Strukturen festgestellt werden. KW - Molekularstrahlepitaxie KW - Siliciumdioxid KW - Mangansilicide KW - Mangansilizid KW - Suboxid KW - Manganesesilicide KW - Siliconsuboxide KW - Silicium KW - Herstellung KW - Halbleiter KW - Mangan Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-83757 ER - TY - THES A1 - Scholz, Markus T1 - Energy-Dispersive NEXAFS: A Novel Tool for the Investigation of Intermolecular Interaction and Structural Phase Dynamics T1 - Energiedispersives NEXAFS: Eine neue Methode zur Untersuchung intermolekularer Wechselwirkung und Phasendynamik N2 - In the context of this thesis, the novel method soft X-ray energy-dispersive NEXAFS spectroscopy was explored and utilized to investigate intermolecular coupling and post-growth processes with a temporal resolution of seconds. 1,4,5,8- naphthalene tetracarboxylic acid dianhydride (NTCDA)multilayer films were the chosen model system for these investigations. The core hole-electron correlation in coherently coupled molecules was studied by means of energy-dispersive near-edge X-ray absorption fine-structure spectroscopy. A transient phase was found which exists during the transition between a disordered condensed phase and the bulk structure. This phase is characterized by distinct changes in the spectral line shape and energetic position of the X-ray absorption signal at the C K-edge. The findings were explained with the help of theoretical models based on the coupling of transition dipole moments, which are well established for optically excited systems. In consequence, the experimental results provides evidence for a core hole-electron pair delocalized over several molecules. Furthermore, the structure formation of NTCDA multilayer films on Ag(111) surfaces was investigated. With time-resolved and energy-dispersive NEXAFS experiments the intensity evolution in s- and p-polarization showed a very characteristic behavior. By combining these findings with the results of time-dependent photoemission measurements, several sub-processes were identified in the post- growth behavior. Upon annealing, the amorphous but preferentially flat-lying molecules flip into an upright orientation. After that follows a phase characterized by strong intermolecular coupling. Finally, three-dimensional islands are established. Employing the Kolmogorov-Johnson-Mehl-Avrami model, the activation energies of the sub-processes were determined. N2 - Im Rahmen dieser Arbeit wurden die Möglichkeiten der neuartigen Methode energiedispersive Röntgen-Nahkanten-Absorptions-Spektroskopie für die Untersuchung intermolekularer Wechselwirkungen und zeitabhängiger Prozesse während der Strukturbildung aufgezeigt. Als Modellsystem wurden hierbei 1,4,5,8- Naphthalin-Tetracarboxyls¨aure-Dianhydrid-(NTCDA-) Filme verwendet. Es wurde die Rumpfloch-Elektronen-Wechselwirkung kohärent gekoppelter Moleküle mittels energiedispersiver Röntgen-Nahkanten-Absorptions-Spektroskopie untersucht. Dabei wurde eine Übergangsphase gefunden, die während der Ausbildung einer langreichweitigen Ordnung zeitlich zwischen der ungeordneten und der Volumenstruktur auftritt. Diese Übergangsphase zeichnete sich durch eine charakteristische Änderung der spektralen Linienform und ihrer energetischen Position bei Messungen an der C K-Kante aus. Die experimentellen Befunde lassen sich mit Hilfe theoretischer Modelle erklären, welche die Kopplung von Übergangsdipolmomenten beschreiben. Diese theoretischen Konzepte sind bei optisch angeregten Systemen etabliert. Die experimentellen Ergebnisse zeigen den über mehrere Moleküle delokalisierten Charakter des Rumpfloch-Elektron-Paars. Zudem wurde die Strukturbildung von mehrlagigen NTCDA-Filmen auf Ag(111) untersucht. Zeitabhängige energiedispersive NEXAFS-Experimente mit s- und p-polarisiertem Licht zeigten ein charakteristisches Verhalten. In Kombination mit zeitabhängigen Photoemissionsmessungen wurden bei der Strukturbildung verschiedene Unterprozesse gefunden. Nach erwärmen der Probe richten sich die ursprünglich flach orientierte Moleküle zunächst auf. Im Anschluss folgt eine Aggregation der Moleküle in einer Phase mit starker intermolekularer Kopplung. Letztendlich bildet sich die bekannte dreidimensionale Filmstruktur aus. Anhand des Kolmogorov-Johnson-Mehl-Avrami Modells konnte die Aktivierungsenergie für die verschiedenen Unterprozesse ermittelt werden. KW - Organisches Molekül KW - NEXAFS KW - Zwischenmolekulare Kraft KW - Dünne Schicht KW - Energiedispersiv KW - Phasendynamik KW - Strukturbildung KW - NEXAFS KW - energy-dispersive KW - organic molecule KW - intermolecular interaction KW - phase dynamics Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-83839 ER - TY - THES A1 - Ebel, Lars Frederik T1 - Molecular Beam Epitaxy and Characterization of Ferromagnetic Bulk and Thin (Ga,Mn)As Layers/Heterostructures T1 - Molekularstrahlepitaxie und Charakterisierung von dicken und dünnen ferromagnetischen (Ga,Mn)As Schichten/Heterostrukturen N2 - Die vorgelegte Arbeit untersucht den ferromagnetischen Halbleiter (Ga,Mn)As mit seinen komplexen Eigenschaften im Hinblick auf die Optimierung der Materialeigenschaften sehr dünner (4 nm) (Ga,Mn)As Schichten, welche mit der Technologie der Molekularstrahlepitaxie (MBE) hergestellt wurden. Zuerst werden die strukturellen, ferromagnetischen und elektrischen Eigenschaften von (Ga,Mn)As vorgestellt. Die Einflüsse von Punktdefekten, Grenzflächen- und Oberflächen-Effekten auf dicke und dünne (Ga,Mn)As Schichten werden mit Hilfe von vereinfachten, selbstkonsistenten Berechnungen der Bandkantenverläufe diskutiert. Der Experimental-Teil ist in drei Teile unterteilt: Der erste Teil untersucht den Einfluss der epitaktischen Wachstumsbedingungen auf die elektrischen und magnetischen Eigenschaften von dicken (70 nm) (Ga,Mn)As Schichten. Der zweite Teil führt ein alternatives, parabolisches Mn-Dotierprofil mit effektiver Schichtdicke von 4 nm ein im Vergleich zu einer gleich dünnen Schicht mit homogenem Mn-Dotierprofil. Es konnten einerseits verbesserte Eigenschaften dieser parabolischen Schicht erreicht werden, anderseits sind die magnetischen und elektrischen Eigenschaften vergleichbar zu dicken (Ga,Mn)As Schichten mit gleichem Mn-Gehalt von 4%. MBE Wachstumsbedingungen für (Ga,Mn)As Schichten mit parabolischem Mn-Dotierprofil und verringertem nominellem Mn-Gehalt von 2.5% wurden ebenfalls untersucht. Ein schmales Wachstumsfenster wurde hierbei ermittelt, in dem die Tieftemperatur-Eigenschaften verbessert sind. Der letzte Teil der Arbeit präsentiert eine Anwendung der magnetischen Anisotropiekontrolle einer dicken (Ga,Mn)As Schicht. N2 - The present thesis studies the (Ga,Mn)As material in terms of optimization of very thin (4 nm) (Ga,Mn)As layers, epitaxially fabricated by the molecular beam epitaxy (MBE) technology. First of all, the ferromagnetic semiconductor (Ga,Mn)As with its structural, magnetic and electrical properties is introduced. The influences of point defects, interface and surface effects on bulk and thin (Ga,Mn)As layers are discussed by simplified self-consistent band alignment calculations. The experimental part is divided in three blocks: The first part studies the influence of epitaxial growth parameter conditions on electrical and magnetic properties of bulk (70 nm) (Ga,Mn)As layers. The second part introduces an alternative, parabolical Mn doping-profile instead of a 4 nm layer with a homogeneous Mn doping-profile. Improved properties of the parabolic layer have been observed as well as comparable magnetic and electrical properties to bulk (Ga,Mn)As layers, both with a Mn content of 4%. MBE growth parameters for the (Ga,Mn)As layers with a parabolically graded Mn profile and lowered nominal Mn content of 2.5% have been investigated. A narrow growth window has been found in which low-temperature (LT) layer properties are improved. The last part of this thesis presents an application of magnetic anisotropy control of a bulk (Ga,Mn)As layer. KW - Molekularstrahlepitaxie KW - ferromagnetische Halbleiter KW - magnetische Anisotropie KW - GaMnAs KW - Molecular Beam Epitaxy KW - Ferromagnetic Semiconductors KW - Magnetic Anisotropy KW - GaMnAs KW - Galliumarsenid KW - Manganarsenide KW - Magnetischer Halbleiter Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-83942 ER - TY - THES A1 - Förtig, Alexander T1 - Recombination Dynamics in Organic Solar Cells T1 - Rekombinationsdynamiken in organischen Solarzellen N2 - Neben herkömmlichen, konventionellen anorganischen Solarzellen — hauptsächlich auf Silizium basierend — ist die Organische Photovoltaik (OPV) auf dem besten Wege in naher Zukunft eine kostengünstige, umweltfreundliche, komplementäre Technolgie darzustellen. Die Produktionskosten, die Lebenszeit der Solarzellen sowie deren Wirkungsgrad müssen dabei weiter optimiert werden, um einen Markteintritt der OPV zu ermöglichen. Die vorliegende Arbeit befasst sich mit der Effizienz organischer Solarzellen und deren Limitierung durch die Rekombination von Ladungsträgern. Um funktionsfähige Zellen zu untersuchen, werden zeitaufgelöste Experimente wie die Messung der transienten Photospannung (TPV), des transienten Photostroms (TPC), die Ladungsextraktion (CE) sowie die time delayed collection field (TDCF) Methode angewandt. Untersucht werden sowohl flüssig prozessierte als auch aufgedampfte Proben, unterschiedliche Materialzusammensetzungen und verschiedene Probengeometrien. Das Standardmaterialsystem der OPV, P3HT:PC61BM, wird bei verschiedenen emperaturen und Beleuchtungsstärken auf die Lebenszeit und Dichte der photogenerierten Ladungsträger überprüft. Für den Fall spannungsunabhängiger Generation von Ladungsträgern zeigt sich die Anwendbarkeit der Shockley-Gleichung auf organische Solarzellen. Des Weiteren wird ein konsistentes Modell erläutert, welches den Idealtitätsfaktor direkt mit der Rekombination von freien mit gefangenen, exponentiell verteilten Ladungsträgern verknüpft. Ein Ansatz, bekannt unter der Bezeichung j=V Rekonstruktion, ermöglicht es, den leistungslimitierenden Verlustmechanismus in unbehandelten und thermisch geheizten P3HT:PC61BM Solarzellen zu identifizieren. Dieses Verf ahren, welches TPV, CE und TDCF Messungen beinhaltet, wird auf Proben basierend auf dem neuartigen, low-band gap Polymer PTB7 in Verbindung mit dem Fulleren PC71BM ausgeweitet. Während in der Zelle hergestellt aus reinem Chlorbenzol beträchtliche geminale wie nichtgeminale Verluste zu beobachten sind, erleichtert die Zugabe eines Lösungsmittelzusatzes die Polaronenpaartrennung, was zu einer starken Reduktion geminaler Verluste führt. In einer Kooperation mit dem IMEC Institut in Leuven, werden abschließend die beiden bedeutensten Probenarchitekturen organischer Solarzellen, die planare und die Mischübergang Struktur, jeweils basierend auf CuPC und C60, bezüglich nichtgeminaler Rekombination und Ladungsträgerverteilung miteinander verglichen. Neben den beiden experimentellen Techniken um TPV und CE werden makroskopische Simulationen herangezogen, um den Ursprung unterschiedlichen Voc vs. Lichtintensität–Verhaltens zu erklären. N2 - Besides established, conventional inorganic photovoltaics—mainly based on silicon—organic photovoltaics (OPV) are well on the way to represent a lowcost, environment friendly, complementary technology in near future. Production costs, solar cell lifetime and performance are the relevant factors which need to be optimized to enable a market launch of OPV. In this work, the efficiency of organic solar cells and their limitation due to charge carrier recombination are investigated. To analyze solar cells under operating conditions, time-resolved techniques such as transient photovoltage (TPV), transient photocurrent (TPC) and charge extraction (CE) are applied in combination with time delayed collection field (TDCF) measurements. Solution processed and evaporated samples of different material composition and varying device architectures are studied. The standard OPV reference system, P3HT:PC61BM, is analyzed for various temperatures in terms of charge carrier lifetime and charge carrier density for a range of illumination intensities. The applicability of the Shockley Equation for organic solar cells is validated in case of field-independent charge photogeneration. In addition, a consistent model is presented, directly relating the ideality factor to the recombination of free with trapped charge carriers in an exponential density of states. An approach known as j=V reconstruction enables to identify the performance limiting loss mechanism of as-prepared and thermally treated P3HT:PC61BM solar cells. This procedure, involving TPV, CE and TDCF measurements, is extended to samples based on the rather new, low-band gap polymer PTB7 in combination with PC71BM. While in the devices processed from pure chlorobenzene solution considerable geminate and nongeminate losses are observed, the use of a solvent additive facilitates efficient polaron pair dissociation minimizing geminate recombination. Finally, in collaboration with the IMEC institute in Leuven, the two main organic solar cell device architectures, planar and bulk heterojunction—both based on CuPc and C60—are directly compared in terms of nongeminate recombination and charge carrier distribution. Two experimental techniques, TPV and CE, as well as a macroscopic device simulation are applied to reveal the origin of different Voc vs. light intensity dependence. KW - Organische Solarzelle KW - Fotovoltaik KW - Organischer Halbleiter KW - physics KW - solar cell KW - recombination KW - organic semiconductors KW - Physik KW - Solartechnik KW - Energietechnik KW - Solarzelle KW - Rekombination Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-83895 ER - TY - THES A1 - Baerwald, Philipp T1 - Neutrinos from gamma-ray bursts, and the multi-messenger connection T1 - Neutrinos von Gammablitzen und die Verbindung zu multiplen Botenteilchen N2 - In this work, we take a look at the connection of gamma-ray bursts (GRBs) and ultra-high-energy cosmic rays (UHECR) as well as the possibilities how to verify this connection. The currently most promising approach is based on the detection of high-energy neutrinos, which are associated with the acceleration of cosmic rays. We detail how the prompt gamma-ray emission is connected to the prediction of a neutrino signal. We focus on the interactions of photons and protons in this regard. At the example of the current ANTARES GRB neutrino analysis, we show the differences between numerical predictions and older analytical methods. Moreover, we discuss the possibilities how cosmic ray particles can escape from GRBs, assuming that UHECR are entirely made up of protons. For this, we compare the commonly assumed neutron escape model with a new component of direct proton escape. Additionally, we will show that the different components, which contribute to the cosmic ray flux, strongly depend on the burst parameters, and test the applicability on some chosen GRBs. In a further step, we continue with the considerations regarding the connection of GRBs and UHECR by connecting the GRB source model with the cosmic ray observations using a simple cosmic ray propagation code. We test if it is possible to achieve the observed cosmic ray energy densities with our simple model and what the consequences are regarding the prompt GRB neutrino flux predictions as well as the cosmogenic neutrinos. Furthermore, we consider the question of neutrino lifetime and how it affects the prompt GRB neutrino flux predictions. In a final chapter, we show that it is possible to apply the basic source model with photohadronic interactions to other types of sources, using the example of the microquasar Cygnus X-3. N2 - In dieser Arbeit beschäftigen wir uns mit dem Zusammenhang von Gammablitzen (GRBs) und ultra-hochenergetischer kosmischer Strahlung (UHECR) sowie mit den Möglichkeiten, wie dieser Zusammenhang überprüft werden kann. Der zur Zeit erfolgsversprechendste Ansatz basiert auf der Detektion von hochenergetischen Neutrinos, die mit der Beschleunigung von kosmischer Strahlung assoziiert werden. Wir zeigen detailliert, wie die prompte Emission im Bereich der Gammastrahlung mit der Voraussage eines Neutrinosignals zusammenhängt. Ein besonderes Augenmerk legen wir hierbei auf die Wechselwirkung von Photonen und Protonen. Am Beispiel der aktuellen Analyse des ANTARES Neutrinoteleskops zu Neutrinos von Gammablitzen zeigen wir, wie sich numerische Voraussagen von älteren analytischen Methoden unterscheiden. Des Weiteren diskutieren wir Möglichkeiten, wie die Teilchen der kosmischen Strahlung aus einem Gammablitz entkommen können, wenn die ultra-hochenergetische kosmische Strahlung nur aus Protonen bestehen würde. Wir vergleichen dazu das meistens angenommene Entkommen in Form von Neutronen mit einer neuen Komponente von direkt ausströmenden Protonen. Auch zeigen wir, dass die unterschiedlichen Komponenten, die zur kosmischen Strahlung beitragen, stark von den verwendeten Parametern der Gammablitze abhängen, und uberprüfen die Modelle an einigen ausgewählten Gammablitzen. In einem weiteren Schritt führen wir die Überlegungen zu dem Zusammenhang von Gammablitzen und ultra-hochenergetischer kosmischer Strahlung fort, in dem wir mittels eines einfachen Propagationscodes für kosmische Strahlung eine Verbindung zwischen dem Quellmodell für Gammablitze und den Beobachtungsdaten der kosmischen Strahlung herstellen. Wir überprüfen, inwieweit sich die beobachteten Energiedichten der kosmischen Strahlung mittels unseres einfachen Modells realisieren lassen und welche Konsequenzen dies für die Voraussagen der prompten Neutrinoemission von Gammablitzen sowie den kosmogenischen Neutrinos hat. Außerdem gehen wir der Frage nach, wie die vorausgesagten prompten Neutrinoflüsse von einer endlichen Lebenszeit der Neutrinos beeinflusst werden würden. In einem letzten Kapitel übertragen wir das verwendete grundlegende Quellmodell mit photohadronischen Wechselwirkungen auf eine andere Klasse von Quellen, am Beispiel von Voraussagen fürden Mikroquasar Cygnus X-3. KW - Neutrino KW - Gamma-Burst KW - neutrinos KW - gamma-ray bursts KW - cosmic rays KW - multi-messenger physics KW - Gammablitze KW - Kosmische Strahlung KW - multiple Botenteilchen KW - UHECR KW - Burst Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85333 ER - TY - THES A1 - Kern, Julia T1 - Field Dependence of Charge Carrier Generation in Organic Bulk Heterojunction Solar Cells T1 - Feldabhängige Ladungsträgergenerierung in organischen Bulk Heterojunction-Solarzellen N2 - In the field of organic photovoltaics, one of the most intensely researched topics to date is the charge carrier photogeneration in organic bulk heterojunction solar cells whose thorough understanding is crucial for achieving higher power conversion efficiencies. In particular, the mechanism of singlet exciton dissociation at the polymer–fullerene interface is still controversially debated. This work addresses the dissociation pathway via relaxed charge transfer states (CTS) by investigating its field dependence for reference material systems consisting of MDMO-PPV and one of the fullerene derivatives PC61BM, bisPCBM and PC71BM. Field dependent photoluminescence (PL(F)) and transient absorption (TA(F)) measurements give insight into the recombination of charge transfer excitons (CTE) and the generation of polarons, respectively. Optically detected magnetic resonance and atomic force microscopy are used to characterize the morphology of the samples. The comparison of the experimental field dependent exciton recombination recorded by PL(F) and the theoretical exciton dissociation probability given by the Onsager–Braun model yields the exciton binding energy as one of the key parameters determining the dissociation efficiency. The binding energies of both the singlet exciton in neat MDMO-PPV and the CTE in MDMO-PPV:PC61BM 1:1 are extracted, the latter turning out to be significantly reduced with respect to the one of the singlet exciton. Based on these results, the field dependence of CTE dissociation is evaluated for MDMO-PPV:PC61BM blends with varying fullerene loads by PL(F) and TA(F). For higher PC61BM contents, the CTE binding energies decrease notably. This behavior is ascribed to a larger effective dielectric constant for well-intermixed blends and to an interplay between dielectric constant and CTE delocalization length for phase separated morphologies, emphasizing the importance of high dielectric constants for the charge carrier photogeneration process. Finally, the CTE binding energies are determined for MDMO-PPV blends with different fullerene derivatives, focusing on the influence of the acceptor LUMO energy. Here, the experimental results suggest the latter having no or at least no significant impact on the binding energy of the CTE. Variations of this binding energy are rather related to different trap levels in the acceptors which seem to be involved in CTS formation. N2 - Einer der aktuellen Forschungsschwerpunkte im Bereich der organischen Photovoltaik ist die Ladungsträgergenerierung in „Bulk Heterojunction-Solarzellen“, deren Verständnis für das Erreichen höherer Wirkungsgrade essentiell ist. In diesem Zusammenhang wird derzeit vor allem der Dissoziationsmechanismus der Singulett-Exzitonen an der Donator–Akzeptor-Grenzfläche kontrovers diskutiert. Die vorliegende Arbeit adressiert die Dissoziation über relaxierte Ladungstransferzustände (CTS) durch die Untersuchung der Feldabhängigkeit des Prozesses für Referenzsysteme aus MDMO-PPV und den Fullerenderivaten PC61BM, bisPCBM sowie PC71BM. Feldabhängige Photolumineszenz (PL(F)) und transiente Absorption (TA(F)) geben Aufschluss über Rekombination der Ladungstransfer-Exzitonen (CTE) bzw. Polaronengenerierung, während die Morphologie der Proben durch optisch detektierte Magnetresonanz und Rasterkraftmikroskopie charakterisiert wird. Durch den Vergleich der experimentellen feldabhängigen Exzitonenrekombination mit der theoretischen Dissoziationswahrscheinlichkeit nach dem Onsager–Braun-Modell lässt sich die Bindungsenergie der Exzitonen ermitteln, welche die Dissoziationseffizienz entscheidend beeinflusst. Diese Bindungsenergie wird sowohl für das Singulett-Exziton in reinem MDMO-PPV als auch für das CTE in MDMO-PPV:PC61BM 1:1 bestimmt, wobei letztere deutlich geringer als die des Singulett-Exzitons ist. Ausgehend von diesen Ergebnissen wird die Feldabhängigkeit der CTE-Dissoziation für MDMO-PPV:PC61BM-Gemische mit unterschiedlichen Fullerenanteilen durch PL(F) und TA(F) untersucht. Für höhere PC61BM-Konzentrationen nimmt die CTE-Bindungsenergie merklich ab. Dieses Verhalten ist für gut durchmischte Systeme einer höheren dielektrischen Konstante und für phasenseparierte Systeme dem Zusammenspiel zwischen Dielektrizitätskonstante und Delokalisation der CTE zuzuschreiben. Schließlich werden die CTE-Bindungsenergien für Gemische aus MDMO-PPV und unterschiedlichen Fullerenderivaten bestimmt, wobei der Einfluss des LUMO-Niveaus der Akzeptoren im Fokus steht. Dieses scheint jedoch keine oder nur eine geringe Bedeutung für die CTE-Bindungsenergie zu besitzen. Die beobachteten Variationen der Bindungsenergie sind vielmehr auf die Fallenzustände der Akzeptoren zurückzuführen, welche offenbar an der Ausbildung der CTS beteiligt sind. KW - Organische Solarzelle KW - organic photovoltaics KW - charge transfer state KW - bulk heterojunction KW - binding energy KW - charge carrier generation KW - Bindungsenergie Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-91963 ER - TY - THES A1 - Bollmann, Stefan T1 - Structural Dynamics of Oligopeptides determined by Fluorescence Quenching of Organic Dyes T1 - Bestimmung struktureller Dynamiken von Oligopeptiden mittels Fluoreszenzlöschung von organischen Fluorophoren N2 - For determination of structures and structural dynamics of proteins organic fluorophores are a standard instrument. Intra- and intermolecular contact of biomolecular structures are determined in time-resolved and stationary fluorescence microscopy experiments by quenching of organic fluorophores due to Photoinduced Electron Transfer (PET) and dimerization interactions. Using PET we show in this work that end-to-end contact dynamics of serine-glycine peptides are slowed down by glycosylation. This slow down is due to a change in reaction enthalpy for end-to-end contact and is partly compensated by entropic effects. In a second step we test how dimerization of MR121 fluorophore pairs reports on end-to-end contact dynamics. We show that in aqueous solutions containing strong denaturants MR121 dimerization reports advantageously on contact dynamics for glycine-serine oligopeptides compared to the previously used MR121/tryptophane PET reporters. Then we analyze dimer interactions and quenching properties of different commercially available fluorophores being standards in Förster Resonance Energy Transfer (FRET) measurements. Distances in biomolecules are determinable using FRET, but for very flexible biomolecules the analysis of masurement data can be distorted if contact of the two FRET fluorophores is likely. We quantify how strong the quenching of fluorophore pairs with two different or two identical fluorophores is. Dimer spectra and association constants are quantified to estimate if fluophores are applicable in various applications, e.g. in FRET measurements with unstructured peptides and proteins. N2 - Zur Charakterisierung von Proteinen werden in der fluoreszenzbasierten Mikroskopie organische Farbstoffe benutzt, um strukturelle Informationen bzw. Informationen über dynamische Prozesse zu gewinnen. In der zeitaufgelösten und stationären Fluoreszenzmikroskopie können hiermit Kontaktprozesse durch photoinduzierten Elektronentransfer und auch Dimerisierung der Fluorophore analysiert werden. In dieser Arbeit wird mittels photoinduziertem Elektronentransfer PET gezeigt, dass Glykosylierung End-zu-End Kontaktkinetiken verändert. Sehr flexible Serin-Glycin Peptide zeigen glykosyliert langsamere Kinetiken durch Veränderung der Reaktionsenthalpie der Kontaktreaktion beider Peptidenden verglichen zu unglykosylierten. Diese enthalpischen Beiträge werden zum Teil von entropischen Beiträgen kompensiert. Außerdem wird gezeigt, dass Glycin-Serin Peptiddynamiken auch mittels Farbstoffpaaren gemessen werden können, die auf Löschwechselwirkungen durch Dimerisierung beruhen. Die Stärke dieser Löschwechselwirkungen hängt vom Farbstoffpaar ab. In Lösungen mit Denaturierungsmitteln können Farbstoffpaare des Fluoreszenzfarbstoffes MR121 vorteilhaft für Messungen von Dynamiken von Glycin-Serin Peptiden genutzt werden. Die Dimerwechselwirkungen können bei sehr flexiblen Biomolekülen und möglichem Kontakt von Fluorophoren die konventionelle Analyse von Förster Resonanz Energie Transfer (FRET) Messungen erschweren. Wir untersuchen an Glycin-Serin Oligopeptiden das Dimerisierungsverhalten kommerziell erhältlicher Fluorophore, die in FRET Messungen verwendet werden. Für gleiche und verschiedene Fluorophore wird die Löschung durch Dimerwechselwirkungen quantifiziert. Dabei werden Dimerspektren und Assoziationskonstanten für Dimerisierungsreaktionen bestimmt. Letztere helfen bei der Abschätzung, ob Fluorophorpaare für verschiedene Anwendungen geeignet sind, zum Beispiel in FRET-Messungen in unstrukturierten Peptiden und Proteinen. KW - Fluorophore KW - Fluoreszenzlöschung KW - h-dimerization KW - Lumineszenzlöschung KW - Fluoreszenzkorrelationsspektroskopie KW - Glykosylierung KW - Dimerisierung Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-92191 ER - TY - THES A1 - Constantino, Jennifer Anne T1 - Characterization of Novel Magnetic Materials: Ultra-Thin (Ga,Mn)As and Epitaxial-Growth MnSi Thin Films T1 - Charakterisierung von neuen magnetischen Materialien: ultradünne (Ga,Mn)As und epitaktisch gewachsene MnSi Dünnschichten N2 - The study of magnetic phases in spintronic materials is crucial to both our fundamental understanding of magnetic interactions and for finding new effects for future applications. In this thesis, we study the basic electrical and magnetic transport properties of both epitaxially-grown MnSi thin films, a helimagnetic metal only starting to be developed within our group, and parabolic-doped ultra-thin (Ga,Mn)As layers for future studies and applications. N2 - Um einerseits ein fundamentales Verständnis magnetischer Wechselwirkungen zu erhalten und andererseits neue Effekte für zukünftige Anwendungen zu finden, ist es entscheidend, magnetische Phasen spintronischer Materialien zu untersuchen. In dieser Arbeit fokussieren wir uns auf grundlegende elektrische und magnetische Transporteigenschaften zweier Materialsysteme. Das sind zum Ersten ultradünne (Ga,Mn)As Filme mit parabolischen Dotierprofilen, und zum Zweiten epitaktisch gewachsene Dünnschichten aus MnSi, einem helimagnetischen Metal, dessen Entwicklung seit Kurzem in unserer Gruppe vorangetrieben wird. KW - Galliumarsenid KW - Manganarsenide KW - Dünne Schicht KW - Magnetischer Halbleiter KW - Helimagnetism KW - Manganese Silicide KW - Gallium Manganese Arsenide KW - Ferromagnetic Semiconductors KW - Magnetic Anisotropy KW - Mangansilicide KW - Magnetotransport KW - Mangan KW - Halbleiter KW - Herstellung Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-90578 ER - TY - THES A1 - Michalska, Marta T1 - Molecular Imaging of atherosclerosis T1 - Molekulare Bildgebung der Atherosklerose N2 - Atherosklerose ist eine aktive und progressive Erkrankung, bei der vaskuläre Adhäsionsmoleküle wie VCAM-1 eine entscheidende Rolle durch Steuerung der Rekrutierung von Immunzellen in den frühen und fortgeschrittenen Plaques spielen. Ein zielgerichteter Einsatz von VCAM-1-Molekülen mit spezifischen Kontrastmitteln ist daher eine Möglichkeit, die VCAM-1-Expression zu kontrollieren, Plaquewachstum ab einem frühen Zeitpunkt zu visualisieren und eine frühe Prävention von Atherosklerose vor Beginn der Thrombusbildung zu etablieren. Des Weiteren bietet die nichtinvasive Magnetresonanz (MR)-Bildgebung den Vorteil der Kombination molekularer und morphologischer Daten. Sie ermöglicht, mithilfe von entwickelten VCAM-1-markierten Eisenoxidpartikeln, den spezifischen Nachweis entzündlicher Prozesse während der Atherosklerose. Diese Arbeit belegt, dass mit dem VCAM-1-Konzept eine vielversprechende Herangehensweise gefunden wurde und dass das, mit spezifischen superparamagnetischen Eisenoxid (USPIO) konjugierte VCAM-1-Peptid, gegenüber unspezifischer USPIOs ein erhöhtes Potenzial bei der Untersuchung der Atherosklerose in sich trägt. Im ersten Teil der Arbeit konnte im Mausmodell gezeigt werden, dass gerade das VCAM-1-Molekül ein sinnvoller Ansatzpunkt zur Darstellung und Bildgebung von Atherosklerose ist, da in der frühen Phase der Entzündung die vaskulären Zelladhäsionsmoleküle überexprimiert und auch kontinuierlich, während der fortschreitenden Plaquebildung, hochreguliert werden. Weiterhin beschreibt diese Arbeit die Funktionstüchtigkeit und das Vermögen des neu gestalteten USPIO Kontrastmittels mit dem zyklischen Peptid, in seiner Spezialisierung auf die VCAM-1 Erkennung. Experimentelle Studien mit ultra-Hochfeld-MRT ermöglichten weitere ex vivo und in vivo Nachweise der eingesetzten USPIO-VCAM-1-Partikel innerhalb der Region um die Aortenwurzel in frühen und fortgeschrittenen atherosklerotischen Plaques von 12 und 30 Wochen alten Apolipoprotein E-defizienten (ApoE-/-) Mäusen. Mit ihrer Kombination aus Histologie und Elektronenmikroskopie zeigt diese Studie zum ersten Mal die Verteilung von VCAM-1-markierten USPIO Partikeln nicht nur in luminalem Bereich der Plaques, sondern auch in tieferen Bereichen der medialen Muskelzellen. Dieser spezifische und sensitive Nachweis der frühen und fortgeschrittenen Stadien der Plaquebildung bringt auf molekularer Ebene neue Möglichkeiten zur Früherkennung von atherosklerotischen Plaques vor dem Entstehen von 8 Rupturen. Im Gegensatz zum USPIO-VCAM-1-Kontrastmittel scheiterten unspezifische USPIO Partikel an der Identifikation früher Plaqueformen und begrenzten die Visualisierung von Atherosklerose auf fortgeschrittene Stadien in ApoE-/- Mäusen. N2 - Atherosclerosis is an active and progressive condition where the vascular cell adhesion molecules as VCAM-1 play a vital role controlling the recruitment of immune cells within the early and advanced plaques. Therefore targeting of VCAM-1 molecules with specific contrast agent bears the possibility to monitor the VCAM-1 expression, visualize the plaque progression starting at the early alterations, and help to establish early prevention of atherosclerosis before the origin of the thrombus formation, of which late recognition leads to myocardial infarction. Furthermore noninvasive magnetic resonance imaging (MRI) offers the benefit of combining the molecular and anatomic data and would thus enable specific detection of VCAM-1 targeted iron oxide contrast agent within inflammatory process of atherosclerosis. This thesis exactly presents the VCAM-1 concept as a suitable molecular approach and the potential of specific ultrasmall superparamagnetic iron oxide (USPIO) conjugated to the VCAM-1 binding peptide over unspecific non-targeted USPIO particles for evaluation of atherosclerosis. This work firstly demonstrated that selection of VCAM-1 molecules offers a good and potential strategy for imaging of atherosclerosis, as these vascular cell adhesion molecules are highly expressed in the early phase of inflammation and also continuously up-regulated within the advanced plaques. Secondly, this thesis showed the proof of principle and capability of the newly designed USPIO contrast agent conjugated to the specific cyclic peptide for VCAM-1 recognition. The experimental studies including ultra-high field MRI enabled further ex vivo and in vivo detection of applied USPIO-VCAM-1 particles within the aortic root region of early and advanced atherosclerotic plaques of 12 and 30 week old apolipoprotein E deficient (ApoE-/-) mice. Using a combination of histology and electron microscopy, this study for the first time pointed to distribution of targeted USPIO-VCAM-1 particles within plaque cells expressing VCAM-1 not only in luminal regions but also in deeper medial smooth muscle cell areas. Hence functionalized USPIO particles targeting VCAM-1 molecules allow specific and sensitive detection of early and advanced plaques at the molecular level, giving the new possibilities for early recognition of atherosclerotic plaques before the appearance of advanced and prone to rupture lesions. In contrast to the functionalized USPIO-VCAM-1, utilized non-targeted USPIO particles did not succeed in early plaque 6 identification limiting visualization of atherosclerosis to advanced forms in atherosclerotic ApoE-/- mice. KW - VCAM KW - Arteriosklerose KW - Superparamagnetische Eisenoxid Kontrastmittel KW - vaskuläre Adhäsionsmoleküle KW - Atherosklerose KW - superparamagnetische Eisenoxid Kontrastmittel KW - vascular cell adhesion molecules KW - atherosclerosis KW - iron oxide contrast agent KW - Kontrastmittel Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73243 ER -