TY - JOUR A1 - Zhang, Fangyuan A1 - Michail, Evripidis A1 - Saal, Fridolin A1 - Krause, Ana-Maria A1 - Ravat, Prince T1 - Stereospecific Synthesis and Photophysical Properties of Propeller-Shaped C\(_{90}\)H\(_{48}\) PAH JF - Chemistry - A European Journal N2 - Herein, we have synthesized an enantiomerically pure propeller‐shaped PAH, C\(_{90}\)H\(_{48}\), possessing three [7]helicene and three [5]helicene subunits. This compound can be obtained in gram quantities in a straightforward manner. The photophysical and chiroptical properties were investigated using UV/Vis absorption and emission, optical rotation and circular dichroism spectroscopy, supported by DFT calculations. The nonlinear optical properties were investigated by two‐photon absorption measurements using linearly and circularly polarized light. The extremely twisted structure and packing of the homochiral compound were investigated by single‐crystal X‐ray diffraction analysis. KW - chirality KW - enantiomers KW - helicenes KW - polycyclic aromatic hydrocarbons KW - stereospecific sythesis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-208682 VL - 25 IS - 71 ER - TY - JOUR A1 - Hattori, Yohei A1 - Michail, Evripidis A1 - Schmiedel, Alexander A1 - Moos, Michael A1 - Holzapfel, Marco A1 - Krummenacher, Ivo A1 - Braunschweig, Holger A1 - Müller, Ulrich A1 - Pflaum, Jens A1 - Lambert, Christoph T1 - Luminescent Mono-, Di-, and Tri-radicals: Bridging Polychlorinated Triarylmethyl Radicals by Triarylamines and Triarylboranes JF - Chemistry - A European Journal N2 - Up to three polychlorinated pyridyldiphenylmethyl radicals bridged by a triphenylamine carrying electron withdrawing (CN), neutral (Me), or donating (OMe) groups were synthesized and analogous radicals bridged by tris(2,6‐dimethylphenyl)borane were prepared for comparison. All compounds were as stable as common closed‐shell organic compounds and showed significant fluorescence upon excitation. Electronic, magnetic, absorption, and emission properties were examined in detail, and experimental results were interpreted using DFT calculations. Oxidation potentials, absorption and emission energies could be tuned depending on the electron density of the bridges. The triphenylamine bridges mediated intramolecular weak antiferromagnetic interactions between the radical spins, and the energy difference between the high spin and low spin states was determined by temperature dependent ESR spectroscopy and DFT calculations. The fluorescent properties of all radicals were examined in detail and revealed no difference for high and low spin states which facilitates application of these dyes in two‐photon absorption spectroscopy and OLED devices. KW - density functional calculations KW - fluorescence KW - NIR OLED KW - radical KW - two-photon absorption Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-208162 VL - 25 IS - 68 ER - TY - JOUR A1 - Merz, Julia A1 - Dietz, Maximilian A1 - Vonhausen, Yvonne A1 - Wöber, Frederik A1 - Friedrich, Alexandra A1 - Sieh, Daniel A1 - Krummenacher, Ivo A1 - Braunschweig, Holger A1 - Moos, Michael A1 - Holzapfel, Marco A1 - Lambert, Christoph A1 - Marder, Todd B. T1 - Synthesis, Photophysical and Electronic Properties of New Red-to-NIR Emitting Donor-Acceptor Pyrene Derivatives JF - Chemistry - A European Journal N2 - We synthesized new pyrene derivatives with strong bis(para ‐methoxyphenyl)amine donors at the 2,7‐positions and n ‐azaacene acceptors at the K‐region of pyrene. The compounds possess a strong intramolecular charge transfer, leading to unusual properties such as emission in the red to NIR region (700 nm), which has not been reported before for monomeric pyrenes. Detailed photophysical studies reveal very long intrinsic lifetimes of >100 ns for the new compounds, which is typical for 2,7‐substituted pyrenes but not for K‐region substituted pyrenes. The incorporation of strong donors and acceptors leads to very low reduction and oxidation potentials, and spectroelectrochemical studies show that the compounds are on the borderline between localized Robin‐Day class‐II and delocalized Robin‐Day class‐III species. KW - orylation KW - K-region KW - luminescence KW - polycyclic aromatic hydrocarbons KW - redox Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207486 VL - 26 IS - 2 ER - TY - JOUR A1 - Griesbeck, Stefanie A1 - Michail, Evripidis A1 - Rauch, Florian A1 - Ogasawara, Hiroaki A1 - Wang, Chenguang A1 - Sato, Yoshikatsu A1 - Edkins, Robert M. A1 - Zhang, Zuolun A1 - Taki, Masayasu A1 - Lambert, Christoph A1 - Yamaguchi, Shigehiro A1 - Marder, Todd B. T1 - The Effect of Branching on One- and Two-Photon Absorption, Cell Viability and Localization of Cationic Triarylborane Chromophores with Dipolar versus Octupolar Charge Distributions for Cellular Imaging JF - Chemistry - A European Journal N2 - Two different chromophores, namely a dipolar and an octupolar system, were prepared and their linear and nonlinear optical properties as well as their bioimaging capabilities were compared. Both contain triphenylamine as the donor and a triarylborane as the acceptor, the latter modified with cationic trimethylammonio groups to provide solubility in aqueous media. The octupolar system exhibits a much higher two‐photon brightness, and also better cell viability and enhanced selectivity for lysosomes compared with the dipolar chromophore. Furthermore, both dyes were applied in two‐photon excited fluorescence (TPEF) live‐cell imaging. KW - boranes KW - cell imaging KW - fluerescence KW - lysosome KW - two-photon excited fluorescence Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204829 VL - 25 IS - 57 ER - TY - JOUR A1 - Liaqat, Anam A1 - Stiller, Carina A1 - Michel, Manuela A1 - Sednev, Maksim V. A1 - Höbartner, Claudia T1 - N\(^6\)-Isopentenyladenosine in RNA Determines the Cleavage Site of Endonuclease Deoxyribozymes JF - Angewandte Chemie International Edition N2 - RNA-cleaving deoxyribozymes can serve as selective sensors and catalysts to examine the modification state of RNA. However, site-specific endonuclease deoxyribozymes that selectively cleave posttranscriptionally modified RNA are extremely rare and their specificity over unmodified RNA is low. In this study, we report that the native tRNA modification N\(^6\)-isopentenyladenosine (i\(^6\)A) strongly enhances the specificity and has the power to reconfigure the active site of an RNA-cleaving deoxyribozyme. Using in vitro selection, we identified a DNA enzyme that cleaves i\(^6\)A-modified RNA at least 2500-fold faster than unmodified RNA. Another deoxyribozyme shows unique and unprecedented behaviour by shifting its cleavage site in the presence of the i\(^6\)A RNA modification. Together with deoxyribozymes that are strongly inhibited by i\(^6\)A, these results highlight intricate ways of modulating the catalytic activity of DNA by posttranscriptional RNA modifications. KW - Deoxyribozymes KW - Epitranscriptomics KW - in vitro selection KW - RNA modification KW - site-specific RNA cleavage Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-212121 ET - Early View ER - TY - JOUR A1 - Ronald, Micura A1 - Höbartner, Claudia T1 - Fundamental studies of functional nucleic acids: aptamers, riboswitches, ribozymes and DNAzymes JF - Chemical Society Reviews N2 - This review aims at juxtaposing common versus distinct structural and functional strategies that are applied by aptamers, riboswitches, and ribozymes/DNAzymes. Focusing on recently discovered systems, we begin our analysis with small-molecule binding aptamers, with emphasis on in vitro-selected fluorogenic RNA aptamers and their different modes of ligand binding and fluorescence activation. Fundamental insights are much needed to advance RNA imaging probes for detection of exo- and endogenous RNA and for RNA process tracking. Secondly, we discuss the latest gene expression–regulating mRNA riboswitches that respond to the alarmone ppGpp, to PRPP, to NAD+, to adenosine and cytidine diphosphates, and to precursors of thiamine biosynthesis (HMP-PP), and we outline new subclasses of SAM and tetrahydrofolate-binding RNA regulators. Many riboswitches bind protein enzyme cofactors that, in principle, can catalyse a chemical reaction. For RNA, however, only one system (glmS ribozyme) has been identified in Nature thus far that utilizes a small molecule – glucosamine-6-phosphate – to participate directly in reaction catalysis (phosphodiester cleavage). We wonder why that is the case and what is to be done to reveal such likely existing cellular activities that could be more diverse than currently imagined. Thirdly, this brings us to the four latest small nucleolytic ribozymes termed twister, twister-sister, pistol, and hatchet as well as to in vitro selected DNA and RNA enzymes that promote new chemistry, mainly by exploiting their ability for RNA labelling and nucleoside modification recognition. Enormous progress in understanding the strategies of nucleic acids catalysts has been made by providing thorough structural fundaments (e.g. first structure of a DNAzyme, structures of ribozyme transition state mimics) in combination with functional assays and atomic mutagenesis. KW - Functional nucleic acids KW - RNA Enzymes KW - RNA labeling KW - nucleoside modification recognition Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-212133 ET - Advance Article ER - TY - JOUR A1 - Pöppler, Ann-Christin A1 - Lübtow, Michael M. A1 - Schlauersbach, Jonas A1 - Wiest, Johannes A1 - Meinel, Lorenz A1 - Luxenhofer, Robert T1 - Loading dependent Structural Model of Polymeric Micelles Encapsulating Curcumin by Solid-State NMR Spectroscopy JF - Angewandte Chemie International Edition N2 - Detailed insight into the internal structure of drug‐loaded polymeric micelles is scarce, but important for developing optimized delivery systems. We observed that an increase in the curcumin loading of triblock copolymers based on poly(2‐oxazolines) and poly(2‐oxazines) results in poorer dissolution properties. Using solid‐state NMR spectroscopy and complementary tools we propose a loading‐dependent structural model on the molecular level that provides an explanation for these pronounced differences. Changes in the chemical shifts and cross‐peaks in 2D NMR experiments give evidence for the involvement of the hydrophobic polymer block in the curcumin coordination at low loadings, while at higher loadings an increase in the interaction with the hydrophilic polymer blocks is observed. The involvement of the hydrophilic compartment may be critical for ultrahigh‐loaded polymer micelles and can help to rationalize specific polymer modifications to improve the performance of similar drug delivery systems. KW - dissolution rates KW - micelles KW - polymers KW - short-range order KW - solid-state NMR spectroscopy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-206705 VL - 58 IS - 51 ER - TY - JOUR A1 - Farrell, Jeffrey M. A1 - Grande, Vincenzo A1 - Schmidt, David A1 - Würthner, Frank T1 - A Highly Warped Heptagon-Containing sp\(^2\) Carbon Scaffold via Vinylnaphthyl π-Extension JF - Angewandte Chemie International Edition N2 - A new strategy is demonstrated for the synthesis of warped, negatively curved, all‐sp\(^2\)‐carbon π‐scaffolds. Multifold C−C coupling reactions are used to transform a polyaromatic borinic acid into a saddle‐shaped polyaromatic hydrocarbon (2 ) bearing two heptagonal rings. Notably, this Schwarzite substructure is synthesized in only two steps from an unfunctionalized alkene. A highly warped structure of 2 was revealed by X‐ray crystallographic studies and pronounced flexibility of this π‐scaffold was ascertained by experimental and computational studies. Compound 2 exhibits excellent solubility, visible range absorption and fluorescence, and readily undergoes two reversible one‐electron oxidations at mild potentials. KW - arenes KW - carbon KW - C-C coupling KW - curvature KW - polycyclic aromatic hydrocarbons Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-206682 VL - 58 IS - 46 ER - TY - JOUR A1 - Scheitl, Carolin P. M. A1 - Lange, Sandra A1 - Höbartner, Claudia T1 - New deoxyribozymes for the native ligation of RNA JF - Molecules N2 - Deoxyribozymes (DNAzymes) are small, synthetic, single-stranded DNAs capable of catalysing chemical reactions, including RNA ligation. Herein, we report a novel class of RNA ligase deoxyribozymes that utilize 5’-adenylated RNA (5’-AppRNA) as the donor substrate, mimicking the activated intermediates of protein-catalyzed RNA ligation. Four new DNAzymes were identified by in vitro selection from an N40 random DNA library and were shown to catalyze the intermolecular linear RNA-RNA ligation via the formation of a native 3’-5’-phosphodiester linkage. The catalytic activity is distinct from previously described RNA-ligating deoxyribozymes. Kinetic analyses revealed the optimal incubation conditions for high ligation yields and demonstrated a broad RNA substrate scope. Together with the smooth synthetic accessibility of 5’-adenylated RNAs, the new DNA enzymes are promising tools for the protein-free synthesis of long RNAs, for example containing precious modified nucleotides or fluorescent labels for biochemical and biophysical investigations. KW - RNA ligation KW - DNA catalysis KW - in vitro selection KW - Deoxyribozyme Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210405 VL - 25 IS - 16 ER - TY - THES A1 - Steinmetzger, Christian T1 - Fluorogenic Aptamers and Fluorescent Nucleoside Analogs as Probes for RNA Structure and Function T1 - Fluorogene Aptamere und Fluoreszierende Nukleosid-Analoga als Sonden für RNA-Struktur und -Funktion N2 - RNA plays a key role in numerous cellular processes beyond the central dogma of molecular biology. Observing and understanding this wealth of functions, discovering new ones and engineering them into purpose-built tools requires a sensitive means of observation. Over the past decade, fluorogenic aptamers have emerged to fill this niche. These short oligonucleotides are generated by in vitro selection to specifically interact with small organic fluorophores and can be utilized as genetically encoded tags for RNAs of interest. The most versatile class of fluorogenic aptamers is based on derivatives of hydroxybenzylidene imidazolone (HBI), a conditional fluorophore mimicking the chromophore structure found in green and red fluorescent proteins. The respective aptamers are well-known by the “vegetable” nomenclature, including Spinach, Broccoli and Corn, and have found numerous applications for studying RNA function in vitro and in cells. Their success, however, is somewhat overshadowed by individual shortcomings such as a propensity for misfolding, dependence on unphysiologically high concentrations of magnesium ions or, in the case of Corn, dimerization that might affect the function of the tagged RNA. Moreover, most fluorogenic aptamers exhibit limited ligand promiscuity by design, thereby restricting their potential for spectral tuning to a narrow window of wavelengths. This thesis details the characterization of a new fluorogenic aptamer system nicknamed Chili. Chili is derived from an aptamer that was originally selected to bind 4-hydroxy-3,5-dimethoxy¬hydroxy-benzylidene imidazolone (DMHBI), resulting in a green fluorescent complex. Unlike other aptamers of its kind, Chili engages in a proton transfer cycle with the bound ligand, resulting in a remarkably large Stokes shift of more than 130 nm. By means of an empirical ligand optimization approach, several new DMHBI derivatives were found that bind to Chili with high affinity, furnishing complexes up to 7.5 times brighter compared to the parent ligand. In addition, Chili binds to π-extended DMHBI derivatives that confer fluorescence in the yellow–red region of the visible spectrum. The highest affinity and degree of fluorescence turn-on for both green and red fluorogenic ligands were achieved by the incorporation of a unique, positively charged substituent into the HBI scaffold. Supplemented by NMR spectroscopy, kinetic and thermodynamic studies showed that the binding site of Chili is loosely preorganized in the absence of ligand and likely forms a G-quadruplex upon ligand binding. To showcase future applications, Chili was incorporated into a FRET sensor for monitoring the cleavage of an RNA substrate by a 10-23 DNAzyme. Besides aptamers as macromolecular fluorescent complexes, fluorescent nucleobase analogs are powerful small isomorphic components of RNA suitable for studying structure and folding. Here, the highly emissive nucleobase analog 4-cyanoindole (4CI) was developed into a ribonucleoside (r4CI) for this purpose. A new phosphoramidite building block was synthesized to enable site-specific incorporation of 4CI into RNA. Thermal denaturation experiments confirmed that 4CI behaves as a universal nucleobase, i.e. without bias towards any particular hybridization partner. Photophysical characterization established r4CI as a generally useful fluorescent ribonucleoside analog. In this work, it was employed to gain further insight into the structure of the Chili aptamer. Using several 4CI-modified Chili–HBI complexes, a novel base–ligand FRET assay was established to obtain a set of combined distance and orientation restraints for the tertiary structure of the aptamer. In addition to their utility for interrogating structure and binding, supramolecular FRET pairs comprising a fluorescent nucleobase analog donor and an innately fluorogenic acceptor hold great promise for the construction of color-switchable RNA aptamer sensor devices. N2 - Weit über das zentrale Dogma der Molekularbiologie hinaus ist RNA an einer Vielzahl zellulärer Prozesse beteiligt. Um diese Prozesse aufzuklären, sie umfassend zu verstehen und sich zunutze zu machen bedarf es geeigneter Detektionsmethoden für RNA. Innerhalb des letzten Jahrzehnts wurden fluorogene Aptamere als ideales Werkzeug für diesen Zweck erkannt. Dabei handelt es sich um vergleichsweise kurze Oligonukleotide, die mittels in vitro-Selektion zur spezifischen Bindung bestimmter organischer Fluorophore erzeugt werden. Analog zu fluoreszierenden Proteinen können sie zur Fluoreszenzmarkierung von RNA eingesetzt werden. Die wichtigste Klasse fluorogener Aptamere bindet und aktiviert Derivate des latenten Fluorophors 4-Hydroxybenzylidenimidazolon (HBI), welcher ursprünglich im Kern fluoreszierender Proteine autokatalytisch aus einem Tripeptid-Fragment entsteht und deren spektrale Eigenschaften bestimmt. Vertreter dieser Klasse, namentlich Spinach, Broccoli und Corn, haben sich als alltägliches Werkzeug zur Fluoreszenzmarkierung von RNA etabliert. Diesem Erfolg gegenüber stehen Unzulänglichkeiten, die das Potential einzelner Aptamere begrenzen. Beispielsweise kann es zur Ausbildung inaktiver Faltungszustände der RNA kommen oder die Fluoreszenzaktivierung erfordert eine hohe Magnesiumkonzentration, welche in Zellen nicht frei verfügbar ist. Im Fall des Corn-Aptamers bildet sich ein Homodimer, was unter Umständen die zu untersuchende RNA beeinträchtigen kann. Darüber hinaus ist, aufgrund der spezifischen Fluorophorbindung, jeweils nur geringes Potenzial zur gezielten Beeinflussung spektraler Eigenschaften vorhanden. Kern dieser Arbeit ist die umfassende Charakterisierung des neuen Chili-Systems. Chili ist die optimierte Version eines Aptamers, welches einen grün fluoreszierenden Komplex mit 4-Hydroxy-3,5-dimethoxybenzylidenimidazolon (DMHBI) ausbildet. Im Gegensatz zu anderen HBI-bindenden Aptameren vollzieht Chili einen Protonenaustausch mit seinem Liganden, woraus Fluoreszenz-emission mit einer ungewöhnlich hohen Stokes-Verschiebung von über 130 nm resultiert. Die Struktur des ursprünglichen Liganden wurde im Hinblick auf höhere Affinität und stärkere Fluoreszenzemission optimiert, wobei ein bis zu 7.5-facher Gewinn an Helligkeit erzielt wurde. Als besonders vorteilhaft hat sich dafür die Einführung eines positiv geladenen Substituenten herausgestellt, der in dieser Form ein Alleinstellungsmerkmal von Chili ist. Auch stark modifizierte DMHBI-Derivate, die ein größeres konjugiertes System besitzen, werden von Chili gebunden und fluoreszieren daraufhin im gelben bis roten Bereich des sichtbaren Spektrums. Studien zur Ligandenbindungskinetik und thermischen Denaturierung des Aptamers legen nahe, dass die zunächst strukturarme Bindungstasche durch die Aufnahme des Liganden einen G-Quadruplex ausbildet, was ebenfalls durch NMR-spektroskopische Daten bestätigt wird. Als Beispiel für mögliche Anwendungen wurde das Chili-Aptamer eingesetzt, um die Spaltung eines RNA-Substrats durch ein 10-23 DNA-Enzym zu beobachten, wobei FRET zwischen dem Aptamer und einem Fluoreszenzmarker am Substrat als Reporter ausgenutzt wurde. Neben makromolekularen Aptamer-Komplexen können fluoreszierende Nukleobasenanaloga als isomorphe Einheiten in RNA integriert werden, um deren Faltungszustand zu untersuchen. In dieser Arbeit wurde das fluoreszierende Nukleobasenanalogon 4-Cyanodinol (4CI) in das entsprechende Ribonukleosid (r4CI) umgewandelt und daraus ein neuer Phosphoramiditbaustein zum Einbau des fluoreszierenden von 4CI in RNA synthetisiert. Anhand thermischer Denaturierungs¬experimente wurde gezeigt, dass es sich bei 4CI um eine universelle Base handelt, die ungeachtet des Hybridisierungskontexts toleriert wird. Die photophysikalische Charakterisierung von r4CI zeigte, dass das fluoreszierendes Ribonukleosid-Analogon seine nützlichen Eigenschaften nach dem Einbau in Oligonukleotide beibehält, sodass es zur Strukturanalyse des Chili-Aptamers verwendet werden konnte. Mithilfe 4CI-modifizierter Chili–HBI-Komplexe wurden erstmals intramolekulare FRET-Paare dieser Art erzeugt und zur Bestimmung kombinierter Abstands- und Orientierungsparameter genutzt. Über ihre Verwendung für Struktur- und Bindungsstudien hinaus stellen supramolekulare FRET-Paare aus fluoreszierenden Nukleobasen-Analoga als Donoren und intrinsisch fluorogenen Akzeptoren eine Möglichkeit dar, neue schaltbare Aptamer-basierte Sensoren zu entwickeln, welche auf die Erkennung ihrer Zielspezies mit einem Wechsel der Fluoreszenzemissionswellenlänge reagieren. KW - Aptamer KW - Nucleosidanaloga KW - RNS KW - Fluoreszenz KW - Fluoreszenz-Resonanz-Energie-Transfer KW - RNA KW - FRET KW - Nucleoside KW - Nucleinsäuren Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207604 ER - TY - JOUR A1 - Wen, Xinbo A1 - Nowak-Król, Agnieszka A1 - Nagler, Oliver A1 - Kraus, Felix A1 - Zhu, Na A1 - Zheng, Nan A1 - Müller, Matthias A1 - Schmidt, David A1 - Xie, Zengqi A1 - Würthner, Frank T1 - Tetrahydroxy-perylene bisimide embedded in zinc oxide thin film as electron transporting layer for high performance non-fullerene organic solar cells JF - Angewandte Chemie International Edition N2 - By introduction of four hydroxy (HO) groups into the two perylene bisimide (PBI) bay areas, new HO‐PBI ligands were obtained which upon deprotonation can complex ZnII ions and photosensitize semiconductive zinc oxide thin films. Such coordination is beneficial for dispersing PBI photosensitizer molecules evenly into metal oxide films to fabricate organic–inorganic hybrid interlayers for organic solar cells. Supported by the photoconductive effect of the ZnO:HO‐PBI hybrid interlayers, improved electron collection and transportation is achieved in fullerene and non‐fullerene polymer solar cell devices, leading to remarkable power conversion efficiencies of up to 15.95 % for a non‐fullerene based organic solar cell. KW - hydroxylation KW - metal complexenes KW - perylene bisimide KW - photoconductive interlayer KW - solar cells Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204723 VL - 58 IS - 37 ER - TY - JOUR A1 - Schmidt, David A1 - Stolte, Matthias A1 - Süß, Jasmin A1 - Liess, Dr. Andreas A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Protein-like enwrapped perylene bisimide chromophore as bright microcrystalline emitter material JF - Angewandte Chemie International Edition N2 - Strongly emissive solid‐state materials are mandatory components for many emerging optoelectronic technologies, but fluorescence is often quenched in the solid state owing to strong intermolecular interactions. The design of new organic pigments, which retain their optical properties despite their high tendency to crystallize, could overcome such limitations. Herein, we show a new material with monomer‐like absorption and emission profiles as well as fluorescence quantum yields over 90 % in its crystalline solid state. The material was synthesized by attaching two bulky tris(4‐tert‐butylphenyl)phenoxy substituents at the perylene bisimide bay positions. These substituents direct a packing arrangement with full enwrapping of the chromophore and unidirectional chromophore alignment within the crystal lattice to afford optical properties that resemble those of their natural pigment counterparts, in which chromophores are rigidly embedded in protein environments. KW - cristal engeneering KW - dyes KW - flourescence quantum yield KW - perylene bisimides KW - solid-state emitters Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204809 VL - 58 IS - 38 ER - TY - JOUR A1 - Lübtow, Michael M. A1 - Marciniak, Henning A1 - Schmiedel, Alexander A1 - Roos, Markus A1 - Lambert, Christoph A1 - Luxenhofer, Robert T1 - Ultra-high to ultra-low drug loaded micelles: Probing host-guest interactions by fluorescence spectroscopy JF - Chemistry - A European Journal N2 - Polymer micelles are an attractive means to solubilize water insoluble compounds such as drugs. Drug loading, formulations stability and control over drug release are crucial factors for drug‐loaded polymer micelles. The interactions between the polymeric host and the guest molecules are considered critical to control these factors but typically barely understood. Here, we compare two isomeric polymer micelles, one of which enables ultra‐high curcumin loading exceeding 50 wt.%, while the other allows a drug loading of only 25 wt.%. In the low capacity micelles, steady‐state fluorescence revealed a very unusual feature of curcumin fluorescence, a high energy emission at 510 nm. Time‐resolved fluorescence upconversion showed that the fluorescence life time of the corresponding species is too short in the high‐capacity micelles, preventing an observable emission in steady‐state. Therefore, contrary to common perception, stronger interactions between host and guest can be detrimental to the drug loading in polymer micelles. KW - curcumin KW - drug delivery KW - fluorenscence KW - poly(2-oxazine) KW - pol(2-oxazoline) KW - Polymer-drug interaction KW - upconversion Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-206128 VL - 25 IS - 54 ER - TY - JOUR A1 - Harkin, David J. A1 - Broch, Katharina A1 - Schreck, Maximilian A1 - Ceyman, Harald A1 - Stoy, Andreas A1 - Yong, Chaw-Keong A1 - Nikolka, Mark A1 - McCulloch, Ian A1 - Stingelin, Natalie A1 - Lambert, Christoph A1 - Sirringhaus, Henning T1 - Decoupling charge transport and electroluminescence in a high mobility polymer semiconductor JF - Advanced Materials N2 - Fluorescence enhancement of a high-mobility polymer semiconductor is achieved via energy transfer to a higher fluorescence quantum yield squaraine dye molecule on 50 ps timescales. In organic light-emitting diodes, an order of magnitude enhancement of the external quantum efficiency is observed without reduction in the charge-carrier mobility resulting in radiances of up to 5 W str\(^{-1}\) m\(^{-2}\) at 800 nm. KW - Light-emitting diodes KW - Fiels-effect transistors KW - Energy transfer KW - Conjugated polymers KW - High performance KW - High efficiency KW - Perovskite KW - Amplification KW - Fluorescence KW - Emission Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-187670 VL - 28 IS - 30 ER - TY - JOUR A1 - Plötz, P.-A. A1 - Polyutov, S. P. A1 - Ivanov, S. D. A1 - Fennel, F. A1 - Wolter, S. A1 - Niehaus, T. A1 - Xie, Z. A1 - Lochbrunner, S. A1 - Würthner, Frank A1 - Kühn, O. T1 - Biphasic aggregation of a perylene bisimide dye identified by exciton-vibrational spectra JF - Physical Chemistry Chemical Physics N2 - The quantum efficiency of light emission is a crucial parameter of supramolecular aggregates that can be tuned by the molecular design of the monomeric species. Here, we report on a strong variation of the fluorescence quantum yield due to different phases of aggregation for the case of a perylene bisimide dye. In particular, a change of the dominant aggregation character from H- to J-type within the first aggregation steps is found, explaining the observed dramatic change in quantum yield. This behaviour is rationalised by means of a systematic study of the intermolecular potential energy surfaces using the time-dependent density functional based tight-binding (TD-DFTB) method. This provides a correlation between structural changes and a coupling strength and supports the notion of H- type stacked dimers and J-type stack-slipped dimers. The exciton-vibrational level structure is modelled by means of an excitonic dimer model including two effective vibrational modes per monomer. Calculated absorption and fluorescence spectra are found to be in reasonable agreement with experimental ones, thus supporting the conclusion on the aggregation behaviour. KW - Potential-energy curves KW - Simulations KW - Molecular-dynamics KW - Systems KW - Fluorescence KW - Sracking KW - Pathway KW - Dimers KW - State Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-187387 VL - 18 IS - 36 ER - TY - JOUR A1 - Maghami, Mohammad Ghaem A1 - Dey, Surjendu A1 - Lenz, Ann-Kathrin A1 - Höbartner, Claudia T1 - Repurpsing Antiviral Drugs for Orthogonal RNA-Catalyzed Labeling JF - Angewandte Chemie, International Edition N2 - In vitro selected ribozymes are promising tools for site-specific labeling of RNA. Previously known nucleic acid catalysts attached fluorescently labeled adenosine or guanosine derivatives through 2’,5’-branched phosphodiester bonds to the RNA of interest. Herein, we report new ribozymes that use orthogonal substrates, derived from the antiviral drug tenofovir, and attach bioorthogonal functional groups, as well as affinity handles and fluorescent reporter units through a hydrolytically more stable phosphonate ester linkage. The tenofovir transferase ribozymes were identified by in vitro selection and are orthogonal to nucleotide transferase ribozymes. As genetically encodable functional RNAs, these ribozymes may be developed for potential cellular applications. The orthogonal ribozymes addressed desired target sites in large RNAs in vitro, as shown by fluorescent labeling of E. coli 16S and 23S RNAs in total cellular RNA. KW - Antiviral nucleoside analogues KW - in vitro selection KW - ribozymes KW - site-specific RNA labeling KW - tenofovir Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-205552 VL - 59 ER - TY - JOUR A1 - Suliman, Salwa A1 - Mustafa, Kamal A1 - Krueger, Anke A1 - Steinmüller-Nethl, Doris A1 - Finne-Wistrand, Anna A1 - Osdal, Tereza A1 - Hamza, Amani O. A1 - Sun, Yang A1 - Parajuli, Himalaya A1 - Waag, Thilo A1 - Nickel, Joachim A1 - Johannessen, Anne Christine A1 - McCormack, Emmet A1 - Costea, Daniela Elena T1 - Nanodiamond modified copolymer scaffolds affects tumour progression of early neoplastic oral keratinocytes JF - Biomaterials N2 - This study aimed to evaluate the tumorigenic potential of functionalising poly(LLA-co-CL) scaffolds. The copolymer scaffolds were functionalised with nanodiamonds (nDP) or with nDP and physisorbed BMP-2 (nDP-PHY) to enhance osteoinductivity. Culturing early neoplastic dysplastic keratinocytes (DOK\(^{Luc}\)) on nDP modified scaffolds reduced significantly their subsequent sphere formation ability and decreased significantly the cells' proliferation in the supra-basal layers of in vitro 3D oral neoplastic mucosa (3D-OT) when compared to DOK\(^{Luc}\) previously cultured on nDP-PHY scaffolds. Using an in vivo non-invasive environmentally-induced oral carcinogenesis model, nDP scaffolds were observed to reduce bioluminescence intensity of tumours formed by DOK\(^{Luc}\) + carcinoma associated fibroblasts (CAF). nDP modification was also found to promote differentiation of DOK\(^{Luc}\) both in vitro in 3D-OT and in vivo in xenografts formed by DOKLuc alone. The nDP-PHY scaffold had the highest number of invasive tumours formed by DOK\(^{Luc}\) + CAF outside the scaffold area compared to the nDP and control scaffolds. In conclusion, in vitro and in vivo results presented here demonstrate that nDP modified copolymer scaffolds are able to decrease the tumorigenic potential of DOK\(^{Luc}\), while confirming concerns for the therapeutic use of BMP-2 for reconstruction of bone defects in oral cancer patients due to its tumour promoting capabilities. KW - Bone morphogenetic protein-2 KW - Sinus floor augmentation KW - Marrow stromal cells KW - Growth; BMP-2 KW - Tumorigenicity KW - Biodegradable polymer scaffolds KW - Mandibular continuity defects KW - Squamous-cell carcinoma KW - In-vitro KW - Mesenchymal transition KW - BMP-2 KW - Bone tissue engineering KW - Biocompatibility KW - Microenvironment KW - Oral squamous cell carcinoma Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-188287 VL - 95 ER - TY - JOUR A1 - Ceyman, Harald A1 - Rosspeintner, Arnulf A1 - Schreck, Maximilian H. A1 - Mützel, Carina A1 - Stoy, Andreas A1 - Vauthey, Eric A1 - Lambert, Christoph T1 - Cooperative enhancement versus additivity of two-photon-absorption cross sections in linear and branched squaraine superchromophores JF - Physical Chemistry Chemical Physics N2 - The linear and nonlinear optical properties of a series of oligomeric squaraine dyes were investigated by one-photon absorption spectroscopy (1PA) and two-photon absorption (2PA) induced fluorescence spectroscopy. The superchromophores are based on two indolenine squaraine dyes with transoid (SQA) and cisoid configuration (SQB). Using these monomers, linear dimers and trimers as well as star-shaped trimers and hexamers with benzene or triphenylamine cores were synthesised and investigated. The red-shifted and intensified 1PA spectra of all superchromophores could well be explained by exciton coupling theory. In the linear chromophore arrangements we also found superradiance of fluorescence but not in the branched systems. Furthermore, the 2PA showed enhanced cross sections for the linear oligomers but only additivity for the branched systems. This emphasizes that the enhancement of the 2PA cross section in the linear arrangements is probably caused by orbital interactions of higher excited configurations. KW - 2-photon absorption KW - Vibronic contributions KW - One-photon KW - Molecules KW - Intensity KW - Multibranched structures KW - Optical properties KW - Dyes KW - Chromophores KW - Design Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-188299 VL - 18 IS - 24 ER - TY - JOUR A1 - Seifert, Sabine A1 - Shoyama, Kazutaka A1 - Schmidt, David A1 - Würthner, Frank T1 - An electron-poor C\(_{64}\) nanographene by palladium-catalyzed cascade C-C bond formation: one-pot synthesis and single-crystal structure analysis JF - Angewandte Chemie-International Edition N2 - Herein, we report the one-pot synthesis of an electron-poor nanographene containing dicarboximide groups at the corners. We efficiently combined palladium-catalyzed Suzuki-Miyaura cross-coupling and dehydrohalogenation to synthesize an extended two-dimensional pi-scaffold of defined size in a single chemical operation starting from N-(2,6-diisopropylphenyl)-4,5-dibromo-1,8-naphthalimide and a tetrasubstituted pyrene boronic acid ester as readily accessible starting materials. The reaction of these precursors under the conditions commonly used for Suzuki-Miyaura cross-coupling afforded a C\(_{64}\) nanographene through the formation of ten C-C bonds in a one-pot process. Single-crystal X-ray analysis unequivocally confirmed the structure of this unique extended aromatic molecule with a planar geometry. The optical and electrochemical properties of this largest ever synthesized planar electron-poor nanographene skeleton were also analyzed. KW - Graphene nanoribbons KW - Liquid-crystalline KW - dyes/pigments KW - polycyclic aromatic hydrocarbons KW - two-dimensional nanostructures KW - Aromatic-hydrocarbon KW - Carbon KW - Dyes KW - Functionalization KW - cascade reactions KW - nanographene Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-188889 VL - 55 IS - 22 ER - TY - JOUR A1 - Meza-Chincha, Ana-Lucia A1 - Lindner, Joachim O. A1 - Schindler, Dorothee A1 - Schmidt, David A1 - Krause, Ana-Maria A1 - Röhr, Merle I. S. A1 - Mitrić, Roland A1 - Würthner, Frank T1 - Impact of substituents on molecular properties and catalytic activities of trinuclear Ru macrocycles in water oxidation N2 - Herein we report a broad series of new trinuclear supramolecular Ru(bda) macrocycles bearing different substituents at the axial or equatorial ligands which enabled investigation of substituent effects on the catalytic activities in chemical and photocatalytic water oxidation. Our detailed investigations revealed that the activities of these functionalized macrocycles in water oxidation are significantly affected by the position at which the substituents were introduced. Interestingly, this effect could not be explained based on the redox properties of the catalysts since these are not markedly influenced by the functionalization of the ligands. Instead, detailed investigations by X-ray crystal structure analysis and theoretical simulations showed that conformational changes imparted by the substituents are responsible for the variation of catalytic activities of the Ru macrocycles. For the first time, macrocyclic structure of this class of water oxidation catalysts is unequivocally confirmed and experimental indication for a hydrogen-bonded water network present in the cavity of the macrocycles is provided by crystal structure analysis. We ascribe the high catalytic efficiency of our Ru(bda) macrocycles to cooperative proton abstractions facilitated by such a network of preorganized water molecules in their cavity, which is reminiscent of catalytic activities of enzymes at active sites. KW - water oxidation KW - self-assembly KW - solar fuels KW - supramolecular materials KW - catalysis Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204653 UR - https://doi.org/10.1039/D0SC01097A SN - 2041-6539 ER - TY - JOUR A1 - Grande, Vincenzo A1 - Soberats, Bartolome A1 - Herbst, Stefanie A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Hydrogen-bonded perylene bisimide J-aggregate aqua material N2 - A new twelvefold methoxy-triethyleneglycol-jacketed tetraphenoxy-perylene bisimide (MEG-PBI) amphiphile was synthesized that self-assembles into two types of supramolecular aggregates in water: red-coloured aggregates of low order and with weak exciton coupling among the PBIs and blue-coloured strongly coupled J-aggregates consisting of a highly ordered hydrogen-bonded triple helix of PBIs. At room temperature this PBI is miscible with water at any proportions which enables the development of robust dye aggregates in solution, in hydrogel states and in lyotropic liquid crystalline states. In the presence of 60–95 wt% water, self-standing coloured hydrogels exhibit colour changes from red to blue accompanied by a fluorescence light-up in the far-red region upon heating in the range of 30–50 °C. This phenomenon is triggered by an entropically driven temperature-induced hydrogen-bond-directed slipped stacking arrangement of the MEG-PBI chromophores within structurally well-defined J-aggregates. This versatile aqua material is the first example of a stable PBI J-aggregate in water. We anticipate that this study will open a new avenue for the development of biocompatible functional materials based on self-assembled dyes and inspire the construction of other hydrogen-bonded supramolecular materials in the highly competitive solvent water. KW - self-assembly KW - dyes KW - aqua material Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204715 UR - https://doi.org/10.1039/C8SC02409J SN - 2041-6539 VL - 9 ER - TY - JOUR A1 - Renner, Rebecca A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Self-Assembly of bowl-shaped naphthalimide-annulated corannulene JF - ChemistryOpen N2 - The self-assembly of a bowl-shaped naphthalimide-annulated corannulene of high solubility has been studied in a variety of solvents by NMR and UV/Vis spectroscopy. Evaluation by the anti-cooperative K\(_2\)-K model revealed the formation of supramolecular dimers of outstanding thermodynamic stability. Further structural proof for the almost exclusive formation of dimers over extended aggregates is demonstrated by atomic force microscopy (AFM) and diffusion ordered spectroscopy (DOSY) measurements as well as by theoretical calculations. Thus, herein we present the first report of a supramolecular dimer of an annulated corannulene derivative in solution and discuss its extraordinarily high thermodynamic stability with association constants up to > 10\(^6\)M\(^-\) \(^1\) in methylcyclohexane, which is comparable to the association constants given for planar phthalocyanine and perylene bisimide dyes. KW - corannulene KW - π-π-interactions KW - aelf-assembly KW - aggregation KW - supramolecular chemistry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204396 VL - 9 IS - 1 ER - TY - JOUR A1 - Mueller, Stefan A1 - Lüttig, Julian A1 - Malý, Pavel A1 - Ji, Lei A1 - Han, Jie A1 - Moos, Michael A1 - Marder, Todd B. A1 - Bunz, Uwe H. F. A1 - Dreuw, Andreas A1 - Lambert, Christoph A1 - Brixner, Tobias T1 - Rapid multiple-quantum three-dimensional fluorescence spectroscopy disentangles quantum pathways JF - Nature Communications N2 - Coherent two-dimensional spectroscopy is a powerful tool for probing ultrafast quantum dynamics in complex systems. Several variants offer different types of information but typically require distinct beam geometries. Here we introduce population-based three-dimensional (3D) electronic spectroscopy and demonstrate the extraction of all fourth- and multiple sixth-order nonlinear signal contributions by employing 125-fold (1⨯5⨯5⨯5) phase cycling of a four-pulse sequence. Utilizing fluorescence detection and shot-to-shot pulse shaping in single-beam geometry, we obtain various 3D spectra of the dianion of TIPS-tetraazapentacene, a fluorophore with limited stability at ambient conditions. From this, we recover previously unknown characteristics of its electronic two-photon state. Rephasing and nonrephasing sixth-order contributions are measured without additional phasing that hampered previous attempts using noncollinear geometries. We systematically resolve all nonlinear signals from the same dataset that can be acquired in 8 min. The approach is generalizable to other incoherent observables such as external photoelectrons, photocurrents, or photoions. KW - Atomic and molecular interactions with photons KW - Optical spectroscopy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202529 VL - 10 ER - TY - THES A1 - Liebscher [geb. Blöhbaum], Julia T1 - Side chain functional poly(2-oxazoline)s for biomedical applications T1 - Seitenkettenfunktionalisierte Poly(2-oxazoline) für biomedizinische Anwendungen N2 - The aim of the thesis was to develop water soluble poly(2-oxazoline) (POx) copolymers with new side group functionalities, which can be used for the formation of hydrogels in biomedical applications and for the development of peptide-polymer conjugates. First, random copolymers of the monomer MeOx or EtOx with ButEnOx and EtOx with DecEnOx were synthesized and characterized. The vinyl functionality brought into the copolymer by the monomers ButEnOx and DecEnOx would later serve for post-polymerization functionalization. The synthesized copolymers were further functionalized with thiols via post-polymerization functionalization using a newly developed synthesis protocol or with a protected catechol molecule for hydrogel formation. For the formation of peptide-polymer conjugates, a cyclic thioester, namely thiolactone acrylamide and an azlactone precursor, whose synthesis was newly developed, were attached to the side chain of P(EtOx-co-ButEnOx) copolymers. The application of the functionalized thiol copolymers as hydrogels using thiol-ene chemistry for cross-linking was demonstrated. The swelling behavior and mechanical properties were characterized. The hydrophilicity of the network as well as the cross-linking density strongly influenced the swelling behavior and the mechanical strength of the hydrogels. All hydrogels showed good cell viability results. The hydrogel networks based on MeOx and EtOx were loaded with two dyes, fluorescein and methylene blue. It was observed that the uptake of the more hydrophilic dye fluorescein depended more on the ability of the hydrogel to swell. In contrast, the uptake of the more hydrophobic dye methylene blue was less dependent on the swelling degree, but much more on the hydrophilicity of the network. For the potential application as cartilage glue, (biohybrid) hydrogels were synthesized based on the catechol-functionalized copolymers, with and without additional fibrinogen, using sodium periodate as the oxidizing agent. The system allowed for degradation due to the incorporated ester linkages at the cross-linking points. The swelling behavior as well as the mechanical properties were characterized. As expected, hydrogels with higher degrees of cross-linking showed less swelling and higher elastic modulus. The addition of fibrinogen however increased the elasticity of the network, which can be favorable for the intended application as a cartilage glue. Biological evaluation clearly demonstrated the advantage of degradable ester links in the hydrogel network, where chondrocytes were able to bridge the artificial gap in contrast to hydrogels without any ester motifs. Lastly, different ways to form peptide-polymer conjugates were presented. Peptides were attached with the thiol of the terminal cysteine group to the vinyl side chain of P(EtOx-co-ButEnOx) copolymers by radical thiol-ene chemistry. Another approach was to use a cyclic thioester, thiolactone, or an azlactone functionality to bind a model peptide via native chemical ligation. The two latter named strategies to bind peptides to POx side chains are especially interesting as one and in the case of thiolactone two free thiols are still present at the binding site after the reaction, which can, for example, be used for further thiol-ene cross-linking to form POx hydrogels. In summary, side functional poly(oxazoline) copolymers show great potential for numerous biomedical applications. The various side chain functionalities can be introduced by an appropriate monomer or by post-polymerization functionalization, as demonstrated. By their multi-functionality, hydrogel characteristics, such as cross-linking degree and mechanical strength, can be fine-tuned and adjusted depending on the application in the human body. In addition, the presented chemoselective and orthogonal reaction strategies can be used in the future to synthesize polymer conjugates, which can, for example, be used in drug delivery or in tissue regeneration. N2 - Das Ziel der Arbeit war es, wasserlösliche Poly(2-oxazolin) (POx) Copolymere mit neuen Seitenkettenfunktionalitäten zu entwickeln, welche zur Synthese von Hydrogelen für biomedizinische Anwendungen und zur Entwicklung von Peptid-Polymer Konjugaten genutzt werden können. Zunächst wurden Copolymere aus den Monomeren MeOx oder EtOx mit ButEnOx und EtOx mit DecEnOx synthetisiert und anschließend charakterisiert. Die Monomere wurden statistisch miteinander copolymerisiert, indem sie zusammen zum Start der Reaktion in das Reaktionsgefäß gegeben wurden. Die Vinyl Funktionalität, die durch die Monomere ButEnOx und DecEnOx eingebracht wurde, kann später zur nachträglichen Funktionalisierung am Polymer verwendet werden. Die synthetisierten Copolymere wurden weiterhin mit Thiolen oder mit funktionellen Catecholgruppen ausgestattet, um Hydrogele herzustellen. Um Peptid-Polymer Konjugate zu bilden, wurden zyklische Thioester, genauer Thiolacton acrylamid und ein Azlacton Präkursor, dessen Synthese neu entwickelt wurde, an die Seitenkette von P(EtOx-co-ButEnOx) Copolymere angebunden. Im Folgenden wurde die Anwendung der thiol funktionalisierten Copolymere als Hydrogele, welche mittels radikalischer Thiol-ene Chemie vernetzt wurden, präsentiert. Das Quellverhalten und die mechanischen Eigenschaften wurden analysiert. Sowohl die Hydrophilie des Netzwerkes als auch die Vernetzungsdichte beeinflusste das Quellverhalten und die mechanische Festigkeit stark. Alle Hydrogele zeigten gute Zellverträglichkeit. Die Hydrogele basierend auf MeOx und EtOx wurden außerdem mit den Farbstoffen Fluorescein und Methylenblau beladen. Es wurde beobachtet, dass von den beiden Farbstoffen die Aufnahme des hydrophileren Farbstoffs Fluorescein stärker vom Quellungsgrad des Hydrogels abhing. Hingegen war die Aufnahme des hydrophoberen Farbstoffs Methylenblau weniger davon abhängig wie sehr das Hydrogel quellen konnte, sondern stärker von der Hydrophilie des Hydrogel-Netzwerkes. Um die potenzielle Anwendung als Knorpelkleber zu testen, wurden (biohybrid) Hydrogele basierend auf Catechol-funktionalisiertem Copolymeren mit und ohne zusätzliches Fibrinogen und dem Oxidationsmittel Natriumperiodat hergestellt. Das System war durch die eingebauten Ester Vernetzungspunkte abbaubar. Das Quellverhalten und die mechanischen Eigenschaften wurden charakterisiert. Wie zu erwarten, zeigten Hydrogele mit stärkerer Vernetzung eine geringe Quellung und einen höheren elastischen Modulus. Die Zugabe von Fibrinogen jedoch erhöhte die Elastizität des Netzwerkes, welches förderlich für die avisierte Anwendung als Knorpelkleber sein kann. Die biologische Auswertung zeigte, dass die Ester-haltigen, abbaubaren Vernetzungspunkte von großem Vorteil sind. Die Chondrozyten konnten ohne Probleme den Defektspalt überbrücken, was nicht möglich war, sobald keine Ester Funktionalitäten im Hydrogel eingebunden waren. Zuletzt wurden verschiedene Möglichkeiten Peptid-Polymer Konjugate zu synthetisieren präsentiert. Zum einen wurden Peptide mit der Thiolgruppe des endständigen Cysteins an die Vinyl Seitenkette der P(EtOx-co-ButEnOx) Copolymere mittels radikalischer Thiol-en Chemie angebunden. Des Weiteren wurde ein zyklischer Thioester, das Thiolacton, und eine Azlacton Funktionalität verwendet, um ein Modell Peptid mittels nativer chemischer Ligation zu binden. Die zwei zuletzt genannten Strategien, um Peptide an Polymere zu binden, sind besonders interessant, da hier ein beziehungsweise im Fall der Thiolacton Funktionalität zwei freie Thiole an der Bindungsstelle nach der Reaktion entstehen. Diese könnten genutzt werden, um zum Beispiel über Thiol-en Chemie Peptid-haltige Hydrogele herzustellen. Zusammenfassend zeigen seitenkettenfunktionale Poly(oxazolin) Copolymere ein großes Potenzial für biomedizinische Anwendungen. Die vielen verschiedenen Seitenkettenfunktionalitäten können durch das passende Monomer oder durch Post-Polymerisationsfunktionalisierung eingebracht werden, wie in dieser Arbeit gezeigt. Durch ihre Multifunktionalität können Hydrogel Charakteristika, wie der Vernetzungsgrad und die mechanische Festigkeit, fein eingestellt und angepasst werden, je nach Anwendungsbereich im menschlichen Körper. Die entwickelten chemoselektiven und orthogonalen Reaktionswege können in der Zukunft genutzt werden, um Polymer Konjugate zu synthetisieren, welche zum Beispiel für das Drug Delivery oder im Bereich der Geweberegneration zum Einsatz kommen. KW - Polymere KW - Ringöffnungspolymerisation KW - Hydrogel KW - hydrogel KW - poly(2-oxazoline)s KW - ring-opening polymerization KW - polymer-peptide-conjugate KW - thiol-ene KW - Dihydrooxazole Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203960 ER - TY - JOUR A1 - Fayez, Shaimaa A1 - Feineis, Doris A1 - Aké Assi, Laurent A1 - Seo, Ean-Jeong A1 - Efferth, Thomas A1 - Bringmann, Gerhard T1 - Ancistrobreveines A–D and related dehydrogenated naphthylisoquinoline alkaloids with antiproliferative activities against leukemia cells, from the West African liana Ancistrocladus abbreviatus JF - RSC Advances N2 - A unique series of six biaryl natural products displaying four different coupling types (5,10 , 7,10 , 7,80 , and 5,80) were isolated from the roots of the West African liana Ancistrocladus abbreviatus (Ancistrocladaceae). Although at first sight structurally diverse, these secondary metabolites all have in common that they belong to the rare group of naphthylisoquinoline alkaloids with a fully dehydrogenated isoquinoline portion. Among the African Ancistrocladus species, A. abbreviatus is so far only the second one that was found to produce compounds with such a molecular entity. Here, we report on four new representatives, named ancistrobreveines A–D (12–14, and 6). They were identified along with the two known alkaloids 6-O-methylhamateine (4) and entdioncophylleine A (10). The two latter naphthylisoquinolines had so far only been detected in Ancistrocladus species from Southeast Asia. All of these fully dehydrogenated alkaloids have in common being optically active despite the absence of stereogenic centers, due to the presence of the rotationally hindered biaryl axis as the only element of chirality. Except for ent-dioncophylleine A (10), which lacks an oxygen function at C-6, the ancistrobreveines A–D (12–14, and 6) and 6-O-methylhamateine (4) are 6-oxygenated alkaloids, and are, thus, typical ‘Ancistrocladaceae-type’ compounds. Ancistrobreveine C (14), is the first – and so far only – example of a 7,80-linked fully dehydrogenated naphthylisoquinoline discovered in nature that is configurationally stable at the biaryl axis. The stereostructures of the new alkaloids were established by spectroscopic (in particular HRESIMS, 1D and 2D NMR) and chiroptical (electronic circular dichroism) methods. Ancistrobreveine C (14) and 6-O-methylhamateine (4) exhibited strong antiproliferative activities against drug-sensitive acute lymphoblastic CCRF-CEM leukemia cells and their multidrugresistant subline, CEM/ADR5000. KW - chemistry Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-201686 VL - 9 IS - 28 ER - TY - JOUR A1 - Mufusama, Jean-Pierre A1 - Feineis, Doris A1 - Mudogo, Virima A1 - Kaiser, Marcel A1 - Brun, Reto A1 - Bringmann, Gerhard T1 - Antiprotozoal dimeric naphthylisoquinolines, mbandakamines B\(_3\) and B\(_4\), and related 5,8′-coupled monomeric alkaloids, ikelacongolines A–D, from a Congolese Ancistrocladus liana JF - RSC Advances N2 - From the leaves of a botanically and phytochemically as yet unexplored Ancistrocladus liana discovered in the rainforests of the Central region of the Democratic Republic of the Congo in the vicinity of the town of Ikela, six new naphthylisoquinoline alkaloids were isolated, viz., two constitutionally unsymmetric dimers, the mbandakamines B\(_3\) (3) and B\(_4\) (4), and four related 5,8′-linked monomeric alkaloids, named ikelacongolines A–D (5a, 5b, 6, and 7). The dimers 3 and 4 are structurally unusual quateraryls comprising two 5,8′-coupled monomers linked via a sterically strongly constrained 6′,1′′-connection between their naphthalene units. These compounds contain seven elements of chirality, four stereogenic centers and three consecutive chiral axes. They were identified along with two known related compounds, the mbandakamines A (1) and B\(_2\) (2), which had so far only been detected in two Ancistrocladus species indigenous to the Northwestern Congo Basin. In addition, five known monomeric alkaloids, previously found in related Central African Ancistrocladus species, were isolated from the here investigated Congolese liana, three of them belonging to the subclass of 5,8′-coupled naphthylisoquinoline alkaloids, whereas two compounds exhibited a less frequently occurring 7,8′-biaryl linkage. The stereostructures of the new alkaloids were established by spectroscopic (in particular HRESIMS, 1D and 2D NMR), chemical (oxidative degradation), and chiroptical (electronic circular dichroism) methods. The mbandakamines B\(_3\) (3) and B\(_4\) (4) displayed pronounced activities in vitro against the malaria parasite Plasmodium falciparum and the pathogen of African sleeping sickness, Trypanosoma brucei rhodesiense. KW - chemistry Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-201141 VL - 9 IS - 21 ER - TY - JOUR A1 - Tshitenge Tshitenge, Dieudonné A1 - Bruhn, Torsten A1 - Feineis, Doris A1 - Mudogo, Virima A1 - Kaiser, Marcel A1 - Brun, Reto A1 - Bringmann, Gerhard T1 - An unusually broad series of seven cyclombandakamines, bridged dimeric naphthylisoquinoline alkaloids from the Congolese liana Ancistrocladus ealaensis JF - Scientific Reports N2 - A series of seven unusual dimeric naphthylisoquinoline alkaloids was isolated from the leaves of the tropical liana Ancistrocladus ealaensis J. Léonard, named cyclombandakamine A (1), 1-epi-cyclombandakamine A (2), and cyclombandakamines A3–7 (3–7). These alkaloids have a chemically thrilling structural array consisting of a twisted dihydrofuran-cyclohexenone-isochromene system. The 1′″-epimer of 4, cyclombandakamine A1 (8), had previously been discovered in an unidentified Ancistrocladus species related to A. ealaensis. Both lianas produce the potential parent precursor, mbandakamine A (9), but only A. ealaensis synthesizes the corresponding cyclized form, along with a broad series of slightly modified analogs. The challenging isolation required, besides multi-dimensional chromatography, the use of a pentafluorophenyl stationary phase. Featuring up to six stereocenters and two types of chiral axes, their structures were elucidated by means of 1D and 2D NMR, HRESIMS, in combination with oxidative chemical degradation experiments as well as chiroptical (electronic circular dichroism spectroscopy) and quantum chemical calculations. Compared to the ‘open-chain’ parent compound 9, these dimers displayed rather moderate antiplasmodial activities. KW - Screening KW - Solution-state NMR KW - Stereochemistry KW - Structure elucidation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200759 VL - 9 ER - TY - THES A1 - Kraus, Michael T1 - The Conversion of Bifidobacterium adolescentis Sucrose Phosphorylase into a Polyphenol Transglucosidase via Structure-based Enzyme Engineering T1 - Umwandlung einer Sacharose Phosphorylase in eine Polyphenol Transglukosidase durch strukturbasiertes Enzyme Engineering N2 - The initial goal was the conversion of Bifidobacterium adolescentis Sucrose Phosphorylase (BaSP) into a polyphenol glucosidase by structure based enzyme engineering. BaSP was chosen because of its ability to utilize sucrose, an economically viable and sustainable donor substrate, and transfer the glucosyl moiety to various acceptor substrates. The introduction of aromatic residues into the active site was considered a viable way to render it more suitable for aromatic acceptor compounds by reducing its polarity and potentially introducing π-π-interactions with the polyphenols. An investigation of the active site revealed Gln345 as a suitable mutagenesis target. As a proof of concept BaSP Q345F was employed in the glycosylation of (+)-catechin, (-)-epicatechin and resveratrol. The variant was selective for the aromatic acceptor substrates and the glucose disaccharide side reaction was only observed after almost quantitative conversion of the aromatic substrates. A crystal structure of BaSP Q345F in complex with glucose was obtained and it displayed an unexpected shift of an entire domain by 3.3 Å. A crystal structure of BaSP D192N-Q345F, an inactive variant in complex with resveratrol-3-α-D-glucosid, the glucosylation product of resveratrol, synthesized by BaSP Q345F was solved. It proved that the domain shift is in fact responsible for the ability of the variant to glycosylate aromatic compounds. Simultaneously a ligand free crystal structure of BaSP Q345F disproved an induced fit effect as the cause of the domain shift. The missing link, a crystal structure of BaSP Q345F in the F-conformation is obtained. This does not feature the domain shift, but is in outstanding agreement with the wildtype structure. The domain shift is therefore not static but rather a step in a dynamic process. It is further conceivable that the domain shifted conformation of BaSP Q345F resembles the open conformation of the wild type and that an adjustment of a conformational equilibrium as a result of the Q345F point mutation is observed. An investigation into the background reaction, the formation of glucose-glucose disaccharides of BaSP Q345F and three further variants that addressed the same region (L341C, D316C-L341C and D316C-N340C) revealed the formation of nigerose by BaSP Q345F. N2 - Saccharose Phosphorylase aus Bifidobacterium adolescentis (BaSP) sollte durch strukturbasiertes Enzym-Engineering in die Lage versetzt werden Polyphenole zu glukosylieren. In die katalytische Tasche sollten aromatische Seitenketten eingeführt werden um die Polarität an jene der gewünschten Akzeptorsubstrate anzupassen und eine weitere Stabilisierung durch π-π-Wechselwirkungen zwischen Enzym und Substrat zu erlauben. BaSP Q345F war in der Lage die Zielsubstrate zu glukosylieren und behielt gleichzeitig ausreichen Aktivität bei. Die weitere Untersuchung dieses Enzyms ist in vier Studien beschrieben. Die Kristallstruktur einer inaktiven Variante, BaSP D192Q-Q345F in komplex mit dem Glukosylierungsprodukt Resveratrol-3-α-D-Glukosid wurde gelöst. Dadurch konnte gezeigt werden, dass einer Verschiebung einer Domäne für die Fähigkeit der Variante Glukose auf aromatische Substrate zu übertragen, verantwortlich ist. Die Orientierung des π-Systems von Resveratrol erlaubt weiterhin T-förmige π-π-Wechselwirkungen mit Phe156 und Phe345.Die detaillierte kinetische Untersuchung von BaSP Q345F mit acht Akzeptorsubstraten ergab eine starke Affinität der Variante zu den aromatischen Substraten (KM 0.08 bis 1.55 mM). Weitere Strukturdaten zeigen, dass die Verschiebung der Domäne Teil eines dynamischen Prozesses ist. Des weiteren ist die Q345F Variante in der Lage, den seltenen Zucker Nigerose zu synthetisisern. KW - enzyme engineering KW - sucrose phosphorylase KW - domain shift KW - resveratrol KW - quercetin KW - Phosphorylase KW - Glucosyltransferasen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192477 ER - TY - JOUR A1 - Steinmetzger, Christian A1 - Bäuerlein, Carmen A1 - Höbartner, Claudia T1 - Supramolecular fluorescence resonance energy transfer in nucleobase-modified fluorogenic RNA aptamers JF - Angewandte Chemie, International Edition N2 - RNA aptamers form compact tertiary structures and bind their ligands in specific binding sites. Fluorescence-based strategies reveal information on structure and dynamics of RNA aptamers. Here we report the incorporation of the universal emissive nucleobase analog 4-cyanoindole into the fluorogenic RNA aptamer Chili, and its application as a donor for supramolecular FRET to bound ligands DMHBI+ or DMHBO+. The photophysical properties of the new nucleobase-ligand-FRET pair revealed structural restraints for the overall RNA aptamer organization and identified nucleotide positions suitable for FRET-based readout of ligand binding. This strategy is generally suitable for binding site mapping and may also be applied for responsive aptamer devices. KW - RNA aptamers KW - fluorescence resonance energy transfer KW - large stokes shift KW - isomorphic nucleobase analog KW - structure probing KW - structure probes KW - stokes shift KW - Fluoreszenzresonanz-Energietransfer KW - Isomorphe Nukleobasen-Analoga KW - RNA-Aptamere KW - Stokes-Verschiebung KW - Struktursonden Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203084 N1 - Parallel erschienen in Angewandte Chemie 2020,132, 6826–6830. DOI: 10.1002/ange.201916707 (Deutsche Ausgabe). VL - 59 ER - TY - THES A1 - Kiendl, Benjamin T1 - Application of diamond nanomaterials in catalysis T1 - Anwendung von Diamantnanomaterialien in der Katalyse N2 - In this work the catalytic activity of nanodiamond particles with different dopants and surface terminations and of diamond nanomaterials funtionalized with ruthenium-based photocatalysts was investigated, illustrating materials application in photoredox chemistry and the photo(electro)catalytic reduction of CO2. Regarding the application of diamond nanomaterials in photocatalysis, methods to fabricate and characterize several (un)doped nanoparticles with different surface termination were successfully developed. Various photocatalysts, attached to nanodiamond particles via linker systems, were tested in photoredox catalysis and the photo(electro)catalytic reduction of CO2. N2 - In dieser Arbeit wurde die katalytische Aktivität von Nanodiamant-Partikeln mit unterschiedlichen Dotierungen und Oberflächenterminierungen, sowie von Diamant-Nanomaterialien, die mit Photokatalysatoren auf Rutheniumbasis funktionalisiert wurden, untersucht. Die Verwendung der Materialien in Photoredox-Experimenten und in der photo(elektro)katalytischen Reduktion von CO2 konnte verdeutlicht werden. Für die Verwendung von Diamant-Nanomaterialien in der Photokatalyse wurden erfolgreich Methoden zur Herstellung und Charakterisierung zahlreicher (un)dotierter Nanopartikeln mit unterschiedlicher Oberflächenterminierung entwickelt. Verschiedenartige Photokatalysatoren, die mit Hilfe von Linker-Systemen an Nanodiamant-Partikel angebunden wurden, wurden in der Photoredox-Katalyse und der photoelektrokatalytischen Reduktion von CO2 untersucht. KW - Fotokatalyse KW - Synthesediamant KW - diamond KW - nanomaterials KW - photocatalysis KW - Diamant Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-179415 ER - TY - JOUR A1 - Hollmann, Claudia A1 - Wiese, Teresa A1 - Dennstädt, Fabio A1 - Fink, Julian A1 - Schneider-Schaulies, Jürgen A1 - Beyersdorf, Niklas T1 - Translational approaches targeting ceramide generation from sphingomyelin in T cells to modulate immunity in humans JF - Frontiers in Immunology N2 - In T cells, as in all other cells of the body, sphingolipids form important structural components of membranes. Due to metabolic modifications, sphingolipids additionally play an active part in the signaling of cell surface receptors of T cells like the T cell receptor or the co-stimulatory molecule CD28. Moreover, the sphingolipid composition of their membranes crucially affects the integrity and function of subcellular compartments such as the lysosome. Previously, studying sphingolipid metabolism has been severely hampered by the limited number of analytical methods/model systems available. Besides well-established high resolution mass spectrometry new tools are now available like novel minimally modified sphingolipid subspecies for click chemistry as well as recently generated mouse mutants with deficiencies/overexpression of sphingolipid-modifying enzymes. Making use of these tools we and others discovered that the sphingolipid sphingomyelin is metabolized to ceramide to different degrees in distinct T cell subpopulations of mice and humans. This knowledge has already been translated into novel immunomodulatory approaches in mice and will in the future hopefully also be applicable to humans. In this paper we are, thus, summarizing the most recent findings on the impact of sphingolipid metabolism on T cell activation, differentiation, and effector functions. Moreover, we are discussing the therapeutic concepts arising from these insights and drugs or drug candidates which are already in clinical use or could be developed for clinical use in patients with diseases as distant as major depression and chronic viral infection. KW - sphingolipids KW - CD4+ T cells KW - regulatory T cells (Treg) KW - CD8+ T cells KW - anti-depressant drug Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198806 SN - 1664-3224 VL - 10 IS - 2363 ER - TY - THES A1 - Buschmann, Rachel Abigail T1 - Synthesis of annulated pi-systems based on a tribenzotriquinacene core T1 - Synthese von annellierten pi-Systemen auf Basis eines Tribenzotriquinacenkerns N2 - The aim of this work was the selective functionalisation of tribenzotriquinacene (TBTQ) in order to extend the aromatic system and tune the electronic properties. The synthesised molecules could be starting materials for a model system of a defective graphene fragment. The “triple cyclisation pathway” by Hopf et al. was adapted and fluorinated tribenzotriquinacenes were synthesised for the first time. Phenanthrene groups were also introduced in other model systems and the crystal structures of phenanthrene functionalised TBTQs were compared with the parent molecules. In addition, the arrangement of TBTQ and centro methyl functionalised TBTQ was investigated on a Ag(111) surface for the first time using scanning transmission microscopy (STM). Different arrangements were observed, depending on the coverage of the surface. The insights gained about the interaction between TBTQs as well as their synthesis provide a foundation for further work and potential applications as components in organic electronic devices. N2 - Das Ziel diese Arbeit war die gezielte Funktionalisierung von Tribenzotriquinacen (TBTQ), um dessen aromatisches System zu erweitern und die elekronischen Eigenschaften zu verändern. Diese Zielmoleküle könnten sich als Ausgangsmoleküle für ein Modellsystem für ein gewölbtes Graphenfragment eignen. Die „dreifache Cyclisierungsroute“ von Hopf et al. wurde hierfür adaptiert und es wurden erstmals fluorierte Tribenzotriquinacene synthetisiert. In anderen Modellsystemen wurden Phenanthren-Einheiten eingeführt und die Kristallstrukturen mit dem TBTQ-Stammsystem verglichen. Zusätzlich wurde die Anordnung von TBTQ und centro-methyliertem TBTQ zum ersten Mal auf eine Ag(111)-Oberfläche mittels Rastertunnelmikroskopie (STM) untersucht. Es konnte gezeigt werden, dass neben der zentralen Methylgruppe auch der Grad der Oberflächenabdeckung unterschiedliche Anordnung der Moleküle auf der Oberfläche zur Folge hatte. Die aus dieser Arbeit gewonnenen Erkenntnisse über die Wechselwirkungen zwischen TBTQs sowie deren Synthese dienen als Grundlage für weitere Arbeiten und potenzielle organische Bausteine für elektronische Anwendungen. KW - Triquinacenderivate KW - Chemische Synthese KW - Aromatically annulated triquinacenes KW - Aromatisch anellierte Triquinacene KW - triquinacene derivatives KW - curved hydrocarbons KW - gekrümmte Kohlenwasserstoffe Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193491 ER - TY - THES A1 - Wagner, Wolfgang T1 - Supramolecular Block Copolymers by Seeded Living Supramolecular Polymerization of Perylene Bisimides T1 - Supramolekulare Blockcopolymere von Perylenbisimiden mittels saat-induzierter lebender supramolekularer Polymerisation N2 - The research on supramolecular polymerization has undergone a rapid development in the last two decades, particularly since supramolecular polymers exhibit a broad variety of functionalities and applications in organic electronics, biological science or as functional materials (Chapter 2.1). Although former studies have focused on investigation of the thermodynamics of supramolecular polymerization (Chapter 2.2), the academic interest in the recent years shifted towards gaining insight into kinetically controlled self-assembly and pathway complexity to generate novel out-of-equilibrium architectures with interesting nanostructures and features (Chapter 2.3). Along this path, the concepts of seeded and living supramolecular polymerization were recently developed to enable the formation of supramolecular polymers with controlled length and low polydispersity under precise kinetic control (Chapter 2.4). Besides that, novel strategies were developed to achieve supramolecular copolymerization resulting in complex multicomponent nanostructures with different structural motives. The classification of these supramolecular copolymers on the basis of literature examples and an overview of previously reported principles to create such supramolecular architectures are provided in Chapter 2.5. The aim of the thesis was the non-covalent synthesis of highly desirable supramolecular block copolymers by the approach of living seeded supramolecular polymerization and to study the impact of the molecular shape of the monomeric building blocks on the supramolecular copolymerization. Based on the structure of the previously investigated PBI organogelator H-PBI a series of novel PBIs, bearing identical hydrogen-bonding amide side-groups in imide-position and various kind or number of substituents in bay-position, was synthesized and analyzed within this thesis. The new PBIs were successfully obtained in three steps starting from the respective bromo-substituted perylene-3,4:9,10-tetracarboxylic acid tetrabutylesters or from the N,N’-dicyclohexyl-1,7-dibromoperylene-3,4:9,10-tetracarboxylic acid bisimide. All target compounds were obtained in the final step by imidization reactions of the respective perylene tetracarboxylic acid bisanhydride precursors with N-(2-aminoethyl)-3,4,5-tris(dodecyloxy)-benzamide and were fully characterized by 1H and 13C NMR spectroscopy as well as high resolution mass spectrometry. The variation of bay-substituents strongly changes the optical properties of the monomeric PBIs which were investigated by UV/vis and fluorescence spectroscopy. The increase of the number of the methoxy-substituents provokes, for example, a red-shift of the absorption maxima concomitant with a decrease of extinction coefficients and leads to a drastic increase of the fluorescence quantum yields. Furthermore, the molecular geometry of the PBIs is also affected by variations of the bay-substituents. Thus, increasing the steric demand of the bay-substituents leads to an enlargement of the twist angles of the PBI cores as revealed by DFT calculations. Especially the 1,7-dimethoxy bay-substituted MeO-PBI proved to be very well-suited for the studies envisioned within this thesis. The self-assembly of this PBI derivative was analyzed in detail by UV/vis, fluorescence and FT-IR spectroscopy as well as atomic force microscopy (Chapter 3). These studies revealed that MeO-PBI forms in a solvent mixture of methylcyclohexane and toluene (2:1, v/v) kinetically trapped off-pathway H-aggregated nanoparticles upon fast cooling of a monomeric solution from 90 to 20 °C. However, upon slow cooling of the monomer solution fluorescent J-type nanofibers are formed by π π interactions and intermolecular hydrogen-bonding. The kinetically metastable off-pathway H-aggregates can be transformed into the thermodynamically more favored J-type aggregates by addition of seeds, which are produced by ultrasonication of the polymeric nanofibers. Interestingly, the living character of this seed-induced supramolecular polymerization process was proven by a newly designed multicycle polymerization experimental protocol. This living polymerization experiment clearly proves, that the polymerization can only occur at the “active” ends of the polymeric seed and that almost no recombination or chain termination processes are present. Hence, the approach of living supramolecular polymerization enables the formation of supramolecular polymers with controlled length and narrow polydispersity. In Chapter 4 the copolymerization of MeO-PBI with the structurally similar 1,7-dichloro (Cl-PBI) and 1,7-dimethylthio (MeS-PBI) bay-substituted PBIs is studied in detail. Both PBIs form analogous to MeO-PBI kinetically trapped off-pathway aggregates, which can be converted into the thermodynamically stable supramolecular polymers by seed-induced living supramolecular polymerization under precise kinetic control. However, the stability of the kinetically trapped aggregates of Cl-PBI and MeS-PBI is distinctly reduced compared to that of MeO-PBI, because the π-π-interactions of the kinetically metastable aggregates are hampered through the increased twisting of the PBI-cores of the former PBIs. UV/vis studies revealed that the two-component seeded copolymerization of the kinetically trapped state of MeO-PBI with seeds of Cl-PBI leads to the formation of unprecedented supramolecular block copolymers with A-B-A pattern by a living supramolecular polymerization process at the termini of the seeds. Remarkably, the resulting A-B-A block pattern of the obtained copolymers was clearly confirmed by atomic force microscopy studies as the respective blocks formed by the individual monomeric units could be distinguished by the pitches of the helical nanofibers. Moreover, detailed UV/vis and AFM studies have shown that by inverted two-component seed-induced polymerization, e.g., upon addition of seeds of MeO-PBI to the kinetically trapped aggregates of Cl-PBI, triblock supramolecular copolymers with B-A-B pattern can be generated. The switching of the block pattern could only be achieved because of the perfectly matching conditions for the copolymerization process and the tailored molecular geometry of the individual building blocks of both PBIs. These studies have demonstrated for the first time, that the block pattern of a supramolecular copolymer can be modulated by the experimental protocol through the approach of living supramolecular polymerization. Furthermore, by UV/vis analysis of the living copolymerization of MeO-PBI and MeS-PBI similar results were obtained showing also the formation of both A-B-A and B-A-B type supramolecular block copolymers. Although for these two PBIs the individual blocks could not be identified by AFM because the helical nanofibers of both PBIs exhibit identical helical pitches, these studies revealed for the first time that the approach of seeded living polymerization is not limited to a special pair of monomeric building blocks. In the last part of the thesis (Chapter 5) a systematic study on the two-component living copolymerization of PBIs with various sterical demanding bay-substituents is provided. Thus, a series of PBIs containing identical hydrogen-bonding amide groups in imide position but variable number (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) or size (EtO-PBI, iPrO-PBI) of alkoxy bay-substituents was investigated. The molecular geometry of the monomeric building blocks has a strong impact on the thermodynamically and even more pronounced on the kinetically controlled aggregation in solvent mixtures of MCH and Tol. While the mono- and dialkoxy-substituted PBIs form kinetically metastable species, the self-assembly of the tri- and tetramethoxy-substituted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) is completely thermodynamically controlled. The two 1,7-alkoxy substituted PBIs (EtO-PBI, iPrO-PBI) form very similar to MeO-PBI kinetically off-pathway H-aggregates and thermodynamically more favored J-type aggregates. However, the stability of the kinetically metastable state is drastically lower and the conversion into the thermodynamically favored state much faster than for MeO-PBI. In contrast, the monomethoxy-substituted PBI derivative (1-MeO-PBI) forms a kinetically trapped species by intramolecular hydrogen-bonding of the monomers, which can be transformed into the thermodynamically favored nanofibers by seeded polymerization. Importantly, the two-component seeded copolymerization of the kinetically trapped MeO PBI with seeds of other PBIs of the present series was studied by UV/vis and AFM revealing that the formation of supramolecular block copolymers is only possible for appropriate combinations of PBI building blocks. Thus, the seeded polymerization of the trapped state of the moderately core-twisted MeO-PBI with the, according to DFT-calculations, structurally similar PBIs (EtO-PBI and iPrO-PBI) leads to the formation of A-B-A block copolymers, like in the seeded copolymerization of MeO-PBItrapped with seeds of Cl-PBI and MeS-PBI already described in Chapter 4. However, by addition of seeds of the almost planar PBIs (H-PBI and 1-MeO-PBI) or seeds of the strongly core-twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) to the kinetically trapped state of MeO-PBI no block copolymers can be obtained. The mismatching geometry of these molecular building blocks strongly hampers both the intermolecular hydrogen-bonding and the π-π-interactions between the two different PBIs and consequently prevents the copolymerization process. Furthermore, the studies of the two-component seeded copolymerization of the kinetically trapped species of 1-MeO-PBI with seeds of the other PBIs also corroborated that a precise shape complementarity is crucial to generate supramolecular block copolymers. Thus, by addition of seeds of H-PBI to the kinetically trapped monomers of 1-MeO-PBI supramolecular block copolymers were generated. Both PBIs exhibit an almost planar PBI core according to DFT-calculations leading to strong non-covalent interactions between these PBIs. This perfectly matching geometry of both PBIs also enables the inverted seeded copolymerization of the kinetically trapped monomers of H-PBI with 1-MeO-PBIseed concomitant with a switching of the block pattern of the supramolecular copolymer from A-B-A to B-A-B type. In contrast, the seeding with the moderately twisted (MeO-PBI, EtO-PBI and iPrO-PBI) and the strongly twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12 MeO-PBI) has no effect on the kinetically trapped state of 1-MeO-PBI, because the copolymerization of these PBIs is prevented by the mismatching geometry of the molecular building blocks. In conclusion, the supramolecular polymerization and two-component seeded copolymerization of a series of PBI monomers was investigated within this thesis. The studies revealed that the thermodynamically and kinetically controlled self-assembly can be strongly modified by subtle changes of the monomeric building blocks. Moreover, the results have shown that living supramolecular polymerization is an exceedingly powerful method to generate unprecedented supramolecular polymeric nanostructures with controlled block pattern and length distribution. The formation of supramolecular block copolymers can only be achieved under precise kinetic control of the polymerization process and is strongly governed by the shape complementarity already imparted in the individual components. Thus, these insightful studies might enable a more rational design of monomeric building blocks for the non-covalent synthesis of highly complex supramolecular architectures with interesting properties for possible future applications, e.g., as novel functional materials. N2 - Das Forschungsgebiet der supramolekularen Polymerisation hat sich in den letzten Jahrzehnten sehr rasch entwickelt, zumal da supramolekulare Polymere eine Fülle an Anwendungsmöglichkeiten in der organischen Elektronik, der Biologie oder als Funktionsmaterialen bieten (Kapitel 2.1). Während frühere Studien den Fokus auf die Untersuchung der Thermodynamik der supramolekularen Polymerisation gelegt haben (Kapitel 2.2), hat sich das akademische Interesse in jüngster Zeit dahingehend verschoben, Einblicke in kinetisch kontrollierte Selbstassemblierungsprozesse zu erhalten, um neuartige Strukturen mit faszinierenden Eigenschaften zu generieren (Kapitel 2.3). Im Zuge dieser Entwicklung wurde das Konzept der Saat-induzierten und der lebenden supramolekularen Polymerisation entwickelt, welche die Bildung von supramolekularen Polymeren mit geringer Polydispersität in kinetisch kontrollierten Prozessen ermöglichen (Kapitel 2.4). Des Weiteren wurden neue Strategien zu Erzeugung von Nanostrukturen entwickelt, die aus verschiedenen Komponenten aufgebaut sind und somit neue komplexe Strukturmotive zeigen. Eine Einteilung dieser supramolekularen Copolymere anhand einiger Literaturbeispiele und eine kurze Übersicht über die bisherigen Methoden, solche supramolekularen Strukturen zu erzeugen ist in Kapitel 2.5 dargestellt. Das Ziel der Doktorarbeit war die nicht-kovalente Synthese von erstrebenswerten supramolekularen Blockcopolymeren mittels lebender Saat-induzierter Polymerisation und zu erforschen, wie die molekulare Form der Monomerbausteine die supramolekulare Copolymerisation beeinflusst. Basierend auf der Molekülstruktur des zuvor untersuchten Perylenbisimidfarbstoffes H-PBI wurden in dieser Arbeit eine Reihe von neuen Perylenbisimiden mit identischen Amid-Seitengruppen in Imidposition und unterschiedlicher Art oder Anzahl von Buchtsubstituenten synthetisiert und charakterisiert. Die neuen Perylenbisimide wurden erfolgreich in drei Stufen durch neu entwickelte Syntheserouten erhalten, wobei von den jeweiligen Brom substituierten Perylen-3,4:9,10-tetracarbonsäuretetrabutylestern oder von N,N‘ Dicyclohexyl-1,7-dibromperylen-3,4:9,10-tetracarbonsäurebisimid ausgegangen wurde. Alle Zielverbindungen wurden im letzten Syntheseschritt mittels einer Imidisierungsreaktion der jeweiligen Perylenbisanhydridvorstufen mit N (2-Aminoethyl)-3,4,5-tris(dodecyloxy)benzamid erhalten und mittels 1H- und 13C NMR-Spektroskopie sowie mit hochauflösender Massenspektrometrie charakterisiert. Die Variation der Buchtsubstituenten hat einen starken Einfluss auf die optischen Eigenschaften der Perylenbisimidmonomere, was mittels UV/vis- und Fluoreszenzspektroskopie untersucht wurde. Die ansteigende Zahl der Methoxysubstituenten verursacht zum Beispiel eine Rotverschiebung der Absorptionsmaxima, welche mit einer Abnahme der Extinktionskoeffizienten einhergeht, und führt zu einem starken Anstieg der Fluoreszenzquantenausbeute. Außerdem wird auch die Molekülgeometrie der Perylenbisimide durch die Variation der Buchtsubstituenten beeinflusst. Mittels DFT-Rechnungen konnte gezeigt werden, dass eine Zunahme des sterischen Anspruchs der Buchtsubstituenten eine Vergrößerung des Torsionswinkels der Perylenbisimidkerne zur Folge hat. Als besonders geeignet für die im Rahmen dieser Arbeit anvisierten Studien erwies sich das mit zwei Methylgruppen in 1,7-Buchtposition substituierte MeO-PBI. Die Selbstassemblierung dieses 1,7-Dimethoxy-substituierten Perylenbisimid-Derivates wurde mit Hilfe von UV/vis-, Fluoreszenz- und FT-IR-Spektroskopie sowie mittels Rasterkraftmikroskopie detailliert analysiert (Kapitel 3). Diese Studien haben gezeigt, dass MeO-PBI in einem Lösungsmittelgemisch aus Methylcyclohexan und Toluol (2:1, v/v) in einem kinetisch kontrollierten Prozess durch schnelles Abkühlen der Monomerlösung von 90 auf 20 °C „off-pathway“ Nanopartikel ausbildet. Durch langsames Abkühlen der Monomerlösung entstehen hingegen fluoreszierende, J-aggregierte Nanofasern aufgrund von π-π-Wechselwirkungen und intermolekularen Wasserstoffbrückenbindungen. Die kinetisch metastabilen „off-pathway“ H-Aggregate können durch Zugabe einer polymeren J-Aggregat-Saat, welche durch eine Behandlung der polymeren Nanofasern mit Ultraschall gewonnen werden kann, in die thermodynamisch begünstigten J-Aggregate transformiert werden. Außerdem wurde der lebende Charakter dieser supramolekularen Saat-induzierten Polymerisation durch ein neu entworfenes multizyklisches Versuchsprotokoll nachgewiesen. Diese Experimente zur lebenden supramolekularen Polymerisation zeigen deutlich, dass der Polymerisationsprozess nur an den „aktiven“ Enden der polymeren Saat stattfinden kann und dass außerdem kaum Rekombinations- oder Kettenterminationsprozesse auftreten. Folglich ermöglicht die Methode der lebenden supramolekularen Polymerisation die Synthese von supramolekularen Polymeren mit kontrollierbarer Polymerlänge und geringer Polydispersität. In Kapitel 4 wird die Copolymerisation von MeO-PBI mit den strukturell ähnlichen 1,7 Dichlor- (Cl-PBI) und 1,7-Dimethylthiosubstituierten (MeS-PBI) Perylenbisimiden ausgeführt. Beide neuen Perylenbisimide bilden analog zu MeO-PBI „off-pathway“ Aggregate, die durch Saatzugabe in einem kinetisch kontrollierten Prozess in die thermodynamisch stabileren supramolekularen Polymere umgewandelt werden können. Die Stabilität der kinetisch gefangenen Aggregate von Cl-PBI und MeS-PBI ist jedoch verglichen mit den metastabilen Aggregaten von MeO-PBI deutlich geringer, da die π π Wechselwirkungen zwischen den molekularen Bausteinen aufgrund des vergrößerten Torsionswinkels der Peryleneinheiten stark reduziert sind. UV/vis-spektroskopische Studien zeigen, dass die Saat-induzierte Copolymerisation des kinetisch gefangenen Zustandes von MeO-PBI mit der Saat von Cl-PBI durch einen lebenden Kettenwachstumsprozess an den Polymerenden der Saat zur Ausbildung von neuartigen supramolekularen Blockcopolymeren mit A B A Blockstruktur führt. Die erzeugte A-B-A-Blockstruktur der erhaltenen Copolymere konnte eindeutig mittels Rasterkraftmikroskopie bestätigt werden, da die jeweiligen Polymerblöcke bestehend aus den einzelnen monomeren Einheiten anhand der Ganghöhe der helikalen Nanofasern unterschieden werden können. Ausführliche UV/vis- und Rasterkraftmikroskopiestudien haben außerdem demonstriert, dass, zum Beispiel durch Zugabe der Saat von MeO-PBI zu den kinetisch gefangenen Aggregaten von Cl PBI, Triblockcopolymere mit B-A-B-Blockstruktur in einer invertierten Saat-induzierten Zweikomponenten-Copolymerisation, erzeugt werden können. Dieser Wechsel der Blockstruktur kann nur durch perfekt abgestimmte Bedingungen für die Copolymerisation und bei übereinstimmender Molekülgeometrie der Monomereinheiten erreicht werden. Diese Studien zeigen erstmals, dass die Blockstruktur der supramolekularen Polymere durch das Versuchsprotokoll der lebenden supramolekularen Polymerisation variiert werden kann. Des Weiteren lieferten UV/vis-spektroskopische Untersuchungen der lebenden Copolymerisation von MeO-PBI und MeS-PBI ähnliche Ergebnisse, was darauf hindeutet, dass ebenfalls supramolekulare Blockcopolymere mit A-B-A- und B-A-B-Struktur gebildet werden können. Obwohl die einzelnen Polymerblöcke in diesem Fall wegen der identischen Helixganghöhe der Nanofasern nicht zugeordnet werden konnten, so zeigten diese Experimente doch, dass die Methode der Saat-induzierten lebenden Polymerisation nicht auf ein spezielles Paar von Monomerbausteinen limitiert ist. Im letzten Abschnitt der Doktorarbeit (Kapitel 5) wird eine systematische Studie der lebenden Zweikomponenten-Copolymerisation von Perylenbisimiden mit unterschiedlich sterisch anspruchsvollen Buchtsubstituenten dargestellt. Dementsprechend wurde eine Reihe von Perylenbisimiden mit identischen Amidseitenketten, aber unterschiedlicher Anzahl (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) oder Größe (EtO PBI, iPrO-PBI) der Alkoxybuchtsubstituenten untersucht. Die Molekülgeometrie der Monomereinheiten hat einen starken Einfluss auf das thermodynamisch und mehr noch auf das kinetisch kontrollierte Aggregationsverhalten in Lösungsmittelgemischen aus Methylcyclohexan und Toluol. Während die mono- und dialkoxysubstituierten Perylenbisimide kinetisch metastabile Zustände ausbilden, findet die Selbstassemblierung der tri- und tetramethoxysubstituierten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) vollständig unter thermodynamischer Kontrolle statt. Die zwei 1,7 alkoxysubstituierten Perylenbisimide (EtO-PBI, iPrO-PBI) bilden analog zu MeO PBI sowohl kinetische „off-pathway“ H-Aggregate als auch thermodynamisch begünstigte J Aggregate. Verglichen mit MeO-PBI ist jedoch die Stabilität der kinetisch metastabilen Zustände von EtO-PBI und iPrO-PBI viel geringer und die Umwandlung in die thermodynamisch stabileren Aggregate geschieht daher viel schneller. Das monomethoxysubstituierte Perylenbisimid-Derivat (1 MeO PBI) bildet im Gegensatz dazu kinetisch gefangene Monomere durch intramolekulare Wasserstoffbrücken-bindungen, welche sich durch Saat-induzierte Polymerisation in die thermodynamisch begünstigteren Nanofasern transformieren lassen. Die Saat-induzierte Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von MeO-PBI durch Saatzugabe der anderen Perylenbisimide der Reihe wurde mittels UV/vis-Spektroskopie und Rasterkraftmikroskopie analysiert. Diese Studien eröffneten, dass die Bildung von supramolekularen Blockcopolymeren nur für geometrisch passende Kombinationen der Perylenbisimide möglich ist. Dementsprechend führt die Saat-induzierte Polymerisation des kinetisch gefangenen Zustands von MeO-PBI mit den, laut DFT Rechnungen, strukturell ähnlichen Perylenbisimiden (EtO-PBI, iPrO-PBI) zur Bildung von A B A Blockcopolymeren, analog zu dem im Kapitel 4 beschriebenem Fall der Saat induzierten Copolymerisation mit Cl-PBI und MeS-PBI. Die Zugabe einer Saat der planaren Perylenbisimide (H-PBI, 1-MeO-PBI) oder der Perylenbisimide mit stark verdrehten Perylenkernen (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) zum kinetisch metastabilen Zustand von MeO-PBI führt dagegen nicht zur Bildung von Blockcopolymeren. Der Unterschied in der Molekülgeometrie dieser Monomerbausteine vermindert erheblich die Stärke der π π Wechselwirkungen zwischen den unterschiedlichen Perylenbisimiden und verhindert daher deren Copolymerisation. Die Studien zur Saat induzierten Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von 1-MeO-PBI mit den anderen Perylenbisimiden der Serie bestätigte weiterhin, dass eine genaue Übereinstimmung der molekularen Geometrie entscheidend für die Erzeugung von supramolekularen Blockcopolymeren ist. Durch Zugabe der Saat von H-PBI zum kinetisch metastabilen Zustand von 1-MeO-PBI konnten folglich supramolekulare Blockcopolymere generiert werden. Mittels DFT-Rechnungen wurde gezeigt, dass beide Perylenbisimide einen relativ planaren Perylenkern aufweisen, was zu sehr starken, nicht-kovalenten Wechselwirkungen zwischen diesen beiden Monomerbausteinen führt. Die übereinstimmende Geometrie beider Perylenbisimide ermöglicht auch die invertierte Saat-induzierte Copolymerisation des kinetisch gefangenen Zustands von H-PBI mit 1-MeO-PBISaat, was mit einem Wechsel der Blockstruktur des supramolekularen Blockcopolymers von A B A zu B A B einhergeht. Die Zugabe der Saat der mäßig (EtO-PBI, iPrO PBI) und stark verdrehten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) hat im Gegensatz dazu keinen Effekt auf den kinetisch gefangenen Zustand von 1-MeO-PBI, da die Copolymerisation dieser Perylenbisimide durch die Nichtübereinstimmung der Molekülgeometrie der Monomerbausteine verhindert wird. Abschließend lässt sich zusammenfassen, dass in dieser Arbeit die supramolekulare Polymerisation und Saat-induzierte Zweikomponenten-Copolymerisation einer Reihe von Perylenbisimidmonomeren untersucht worden ist. Die Studien haben demonstriert, dass die thermodynamisch und kinetisch kontrollierten Selbstassemblierungsprozesse durch subtile Änderungen der Monomerbausteine stark variiert werden können. Außerdem zeigen die Ergebnisse, dass die lebende supramolekulare Polymerisation eine sehr leistungsfähige Methode zur Erzeugung von neuartigen supramolekularen, polymeren Nanostrukturen mit kontrollierter Blockstruktur und Längenverteilung darstellt. Die Bildung dieser supramolekularen Blockcopolymere kann nur unter präziser kinetischer Kontrolle erreicht werden und ist durch die Komplementarität der einzelnen molekularen Komponenten stark beeinflusst. Diese aufschlussreichen Studien bilden möglicherweise die Grundlage für ein rationaleres Design neuer Monomerbausteine zur nicht-kovalenten Synthese von hochkomplexen, supramolekularen Strukturen mit potentiell einzigartigen Eigenschaften für mögliche Anwendungen, beispielsweise als neuartige Funktionsmaterialien. KW - Supramolekulare Chemie KW - Perylenbisdicarboximide KW - Lebende Polymerisation KW - Aggregation KW - Supramolecular Block Copolymers KW - Perylenbisimides KW - Kinetic Self-assembly KW - Living Polymerisation KW - Organische Chemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193004 ER - TY - JOUR A1 - Steinmetzger, Christian A1 - Bessi, Irene A1 - Lenz, Ann-Kathrin A1 - Höbartner, Claudia T1 - Structure-fluorescence activation relationships of a large Stokes shift fluorogenic RNA aptamer JF - Nucleic Acids Research N2 - The Chili RNA aptamer is a 52 nt long fluorogen-activating RNA aptamer (FLAP) that confers fluorescence to structurally diverse derivatives of fluorescent protein chromophores. A key feature of Chili is the formation of highly stable complexes with different ligands, which exhibit bright, highly Stokes-shifted fluorescence emission. In this work, we have analyzed the interactions between the Chili RNA and a family of conditionally fluorescent ligands using a variety of spectroscopic, calorimetric and biochemical techniques to reveal key structure - fluorescence activation relationships (SFARs). The ligands under investigation form two categories with emission maxima of ~540 nm or ~590 nm, respectively, and bind with affinities in the nanomolar to low-micromolar range. Isothermal titration calorimetry was used to elucidate the enthalpic and entropic contributions to binding affinity for a cationic ligand that is unique to the Chili aptamer. In addition to fluorescence activation, ligand binding was also observed by NMR spectroscopy, revealing characteristic signals for the formation of a G-quadruplex only upon ligand binding. These data shed light on the molecular features required and responsible for the large Stokes shift and the strong fluorescence enhancement of red and green emitting RNA-chromophore complexes. KW - Chili RNA Aptamer KW - fluorogen-activating RNA aptamer (FLAP) KW - Stokes-shifted fluorescence emission KW - key structure - fluorescence activation relationships (SFARs) KW - ligand binding Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192340 ER - TY - THES A1 - Mufusama Koy Sita, Jean-Pierre T1 - Quality Assessment of Antimalarial Medicines Sold in the Democratic Republic of the Congo and Phytochemical Investigations on a Congolese Ancistrocladus Liana T1 - Qualitätsbewertung der in der Demokratischen Republik Kongo vermarkteten Malariamittel sowie phytochemische Untersuchung einer kongolesichen Ancistracladus-Liane N2 - Nowadays, the management of infectious diseases is especially threatened by the rapid emergence of drug resistance. It has been suggested that the medicine quality assurance combined with good medication adherence may help to reduce this impendence. Moreover, the search for new antimicrobial agents from medicinal plants is strongly encouraged for the exploration of alternatives to existing therapies. In this context, the present work focused on both the quality evaluation of commercialized antimalarial medicines from the Democratic Republic of the Congo and on the phytochemical investigations of a Congolese Ancistrocladus species. N2 - Heute ist die Behandlung von Infektionskrankheiten besonders durch das schnelle Auftreten von Arzneimittelresistenzen bedroht. Es wurde vorgeschlagen, dass eine gute Arzneimittelqualitätssicherung in Verbindung mit einer sicheren Medikamentenhaftung dazu beitragen kann, dieser Gefahr entgegenzuwirken. Darüber hinaus wird unter anderem die Suche nach neuen antimikrobiellen Wirkstoffen aus Heilpflanzen dringend empfohlen, um nach Alternativen zu bestehenden Therapien Ausschau zu halten. In diesem Zusammenhang konzentrierte sich die vorliegende Arbeit sowohl auf die Qualitätsbewertung der in der Demokratischen Republik Kongo (DR Kongo) vermarkteten Malariamittel, als auch auf die phytochemische Untersuchung einer kongolesischen Ancistrocladus-Art. ... KW - artemether - lumefantrine KW - amodiaquine KW - Congolese Ancistrocladus plants KW - Quality assessment of antimalarial medicines from the Congo KW - Phytochemical investigations of a Congolese Ancistrocladus Liana KW - substandard and falsified medicines from the Congo KW - impurity profiling KW - capillary zone electrophoresis KW - naphthylisoquinoline alkaloids KW - Antimalariamittel KW - Demokratische Republik Kongo KW - Ancistrocladaceae KW - Phytochemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192382 ER - TY - INPR A1 - Maghami, Mohammad Ghaem A1 - Scheitl, Carolin P. M. A1 - Höbartner, Claudia T1 - Direct in vitro selection of trans-acting ribozymes for posttranscriptional, site-specific, and covalent fluorescent labeling of RNA T2 - Journal of the American Chemical Society N2 - General and efficient tools for site-specific fluorescent or bioorthogonal labeling of RNA are in high demand. Here, we report direct in vitro selection, characterization, and application of versatile trans-acting 2'-5' adenylyl transferase ribozymes for covalent and site-specific RNA labeling. The design of our partially structured RNA pool allowed for in vitro evolution of ribozymes that modify a predetermined nucleotide in cis (i.e. intramolecular reaction), and were then easily engineered for applications in trans (i.e. in an intermolecular setup). The resulting ribozymes are readily designed for specific target sites in small and large RNAs and accept a wide variety of N6-modified ATP analogues as small molecule substrates. The most efficient new ribozyme (FH14) shows excellent specificity towards its target sequence also in the context of total cellular RNA. KW - covalent and site-specific RNA labeling KW - trans-acting 2'-5' adenylyl transferase ribozymes KW - in vitro selection from a structured RNA library KW - Ribozyme-catalyzed RNA labeling KW - intermolecular applications of ribozymes Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192333 N1 - This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Journal of the American Chemical Society, copyright © American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/jacs.9b10531. ER - TY - THES A1 - Kaufmann, Christina T1 - Discrete Supramolecular Architectures of Bay-linked Perylene Bisimide Dimers by Self-Assembly and Folding T1 - Diskrete supramolekulare Architekturen bucht-verknüpfter Perylenbisimid Dimere durch Selbstassemblierung und Faltung N2 - Supramolecular self-assembly of perylene bisimide (PBI) dyes via non-covalent forces gives rise to a high number of different PBI architectures with unique optical and functional properties. As these properties can be drastically influenced by only slightly structural changes of the formed supramolecular ensembles (Chapter 2.1) the controlled self-assembly of PBI dyes became a central point of current research to design innovative materials with a high potential for different applications as for example in the fields of organic electronics or photovoltaics. As PBI dyes show a strong tendency to form infinite aggregated structures (Chapter 2.2) the aim of this thesis was to precisely control their self-assembly to create small, structurally well-defined PBI assemblies in solution. Chapter 2.3 provides an overview on literature known strategies that were established to realize this aim. It could be demonstrated that especially backbone-directed intra- and intermolecular self-assembly of covalently linked Bis-PBI dyes evolved as one of the most used strategies to define the number of stacked PBI chromophores by using careful designed spacer units with regard to their length and flexibility. By using conventional spectroscopic methods like UV/Vis and fluorescence experiments in combination with NMR measurements an in-depth comparison of the molecular and optical properties in solution both in the non-stacked and aggregated state of the target compounds could be elucidated to reveal structure-property relationships of different PBI architectures. Thus, it could be demonstrated, that spacer units that pre-organize two PBI chromophores with an inter-planar distance of r < 7 Å lead to an intramolecular folding, whereas linker moieties with a length between 7 to 11 Å result in an intermolecular self-assembly of the respective Bis-PBIs dyes via dimerization to form well-defined quadruple PBI pi-stacks. Hence, if the used spacer units ensure an inter-planar distance r > 14 Å larger oligomeric PBI pi-stacks are generated. In Chapter 4 a detailed analysis of the exciton coupling in a highly defined H-aggregate quadruple PBI pi-stack is presented. Therefore, bay-tethered PBI dye Bis-PBI 1 was investigated by concentration-dependent UV/Vis spectroscopy in THF and toluene as well as by 2D-DOSY-NMR spectroscopy, ESI mass spectrometry and AFM measurements confirming that Bis-PBI 1 self-assembles exclusively into dimers with four closely pi-stacked PBI chromophores. Furthermore, with the aid of broadband fluorescence upconversion spectroscopy (FLUPS) ensuring broadband detection range and ultrafast time resolution at once, ultrafast Frenkel exciton relaxation and excimer formation dynamics in the PBI quadruple pi-stack within 1 ps was successfully investigated in cooperation with the group of Dongho Kim. Thus, it was possible to gain for the first time insights into the exciton dynamics within a highly defined synthetic dye aggregate beyond dimers. By analysing the vibronic line shape in the early-time transient fluorescence spectra in detail, it could be demonstrated that the Frenkel exciton is entirely delocalized along the quadruple stack after photoexcitation and immediately loses its coherence followed by the formation of the excimer state. In Chapter 5 four well-defined Bis-PBI folda-dimers Bis-PBIs 2-4 were introduced, where linker units of different length (r < 7 Å) and steric demand were used to gain distinct PBI dye assemblies in the folded state. Structural elucidation based on in-depth UV/Vis, CD and fluorescence experiments in combination with 1D and 2D NMR studies reveals a stacking of the two PBI chromophores upon folding, where geometry-optimized structures obtained from DFT calculations suggest only slightly different arrangements of the PBI units enforced by the distinct spacer moieties. With the resulting optical signatures of Bis-PBIs 2-4 ranging from conventional Hj-type to monomer like absorption features, the first experimental proof of a PBI-based “null-aggregate” could be presented, in which long- and short-range exciton coupling fully compensate each other. Hence, the insights of this chapter pinpoint the importance of charge-transfer mediated short-range exciton coupling that can significantly influence the properties of pi-stacked PBI chromophores In the last part of this thesis (Chapter 6), spacer-controlled self-assembly of four bay-linked Bis-PBI dyes Bis-PBIs 5-8 into well-defined supramolecular architectures was investigated, where the final aggregate structures are substantially defined by the nature of the used spacer units. By systematically extending the backbone length from 7 to 15 Å defining the inter-planar distance between the tethered chromophores, different assemblies from defined quadruple PBI pi-stacks to larger oligomeric pi-stacks could be gained upon aggregation. In conclusion, the synthesis of nine covalently linked PBI dyes in combination with a detailed investigation of their spacer-mediated self-assembly behaviour in solution concerning structure-properties-relationships was presented within this thesis. The results confirm a strong exciton coupling in different types of Bis-PBI architectures e.g. folda-dimers or highly defined quadruple pi-stacks, which significantly influences their optical properties upon self-assembly. N2 - Supramolekulare Selbstorganisationsprozesse von Perylenbisimid-(PBI)-Farbstoffen über nichtkovalente Kräfte führen zu einer Vielzahl unterschiedlicher PBI-Aggregatstrukturen welche sich in ihren einzigartigen optischen und funktionellen Eigenschaften unterscheiden. Diese Eigenschaften können bereits durch leichte strukturelle Veränderungen der gebildeten supramolekularen Strukturen drastisch beeinflusst werden (Kapitel 2.1), was die kontrollierte Selbstassemblierung von PBI-Farbstoffen zu einem zentralen Punkt aktueller Forschungsarbeiten macht. Dadurch soll es ermöglicht werden, innovative Materialien zu generieren, welche ein hohes Potenzial für unterschiedlichste Anwendungen aufzeigen, wie z.B. im Bereich der organischen Elektronik oder Photovoltaik. Da PBI-Farbstoffe eine starke Tendenz zur Bildung ausgedehnter Aggregatstrukturen aufweisen (Kapitel 2.2), war das Ziel dieser Arbeit, kleine, hoch-definierte PBI-Stapel zu generieren, was über die kontrollierte Steuerung ihres Aggregationsverhaltens ermöglicht werden sollte. Kapitel 2.3 gibt dabei einen Überblick über die hierfür in der Literatur verwendeten Strategien. Dabei konnte gezeigt werden, dass vor allem eine intra- bzw. intermolekulare Organisation von kovalent-verknüpften Bis-PBI-Farbstoffen herangezogen wird, um die Anzahl der PBI-Chromophore innerhalb des Aggregates zu limitieren. Dies konnte unter anderem durch eine sorgfältige Auswahl der verwendeten Linker-Einheiten realisiert werden, vor allem hinsichtlich ihrer Länge und Flexibilität. Durch den Einsatz von UV/Vis-, Fluoreszenz- und NMR-Spektroskopie kann ein eingehender Vergleich der molekularen und optischen Eigenschaften der Farbstoffe in Lösung sowohl im monomeren als auch im aggregierten Zustand durchgeführt werden. So konnte gezeigt werden, dass Linker-Einheiten, welche zwei PBI-Chromophore mit einem interplanaren Abstand von r < 7 Å vororganisieren, zu einer intramolekularen Faltung der Bis-PBI-Farbstoffe führen, wohingegen Linker-Einheiten mit einer Länge zwischen 7 - 11 Å eine intermolekulare Selbstorganisation der jeweiligen Bis-PBI-Farbstoffe begünstigen. Gewährleistet die verwendete Linker-Einheit einen interplanaren Abstand r > 14 Å zwischen den beiden PBI-Einheiten, so kommt es zur Erzeugung größerer, oligomerer PBI-Farbstoff-Stapel. Im ersten Teil dieser Arbeit (Kapitel 4) wurde die Exzitonen-Kopplung in einem hochdefinierten PBI-Viererstapel untersucht. Zu diesem Zweck wurde Bis-PBI 1 synthetisiert, dessen Aggregationsverhalten anschließend mittels konzentrationsabhängiger UV/Vis-Spektroskopie in THF und Toluol sowie mittels 2D-DOSY-NMR-Spektroskopie, ESI-Massenspektrometrie und AFM-Messungen ermittelt werden konnte. Dadurch konnte die intermolekulare Dimerisierung von Bis-PBI 1 und damit die Ausbildung hoch-definierter PBI-Viererstapel nach erfolgter Aggregation bestätigt werden. In Zusammenarbeit mit der Gruppe von Dongho Kim konnten weiterhin mittels Femtosekunden-Breitband-Fluoreszenz-Aufkonversions-Spektroskopie (FLUPS) erstmals Einblicke in die Exzitonendynamik innerhalb eines hoch definierten synthetischen Farbstoffaggregats jenseits von Dimeren gewonnen werden. Durch die detaillierte Analyse der vibronischen Linienform der frühen transienten Fluoreszenzspektren konnte gezeigt werden, dass das anfänglich gebildete Frenkel-Exciton nach erfolgter Anregung vollständig entlang des gesamten Viererstaples delokalisiert ist. Der eindeutige Nachweis des initialen, vollständig delokalisierten Frenkel-Exziton-Zustandes und seiner Lokalisation, stellen wichtige Ergebnisse dieser Studie dar Der zweite Teil dieser Arbeit (Kapitel 5) befasste sich mit der Einführung von vier hoch-definierten Bis-PBI-Folda-Dimeren Bis-PBI 2-4, für deren Synthese Linker-Einheiten unterschiedlicher Länge (r < 7 Å) und Flexibilität verwendet wurden. So konnte jeweils eine leicht variierende Anordnung der PBI-Chromophore im gefalteten Zustand generiert werden. Durch die Strukturaufklärung auf Basis von eingehenden UV/Vis-, CD-, Fluoreszenz- und 1D- und 2D-NMR-Studien konnte für alle Farbstoffe Bis-PBIs 2-4 die Faltung zu diskreten pi-Stapeln gezeigt werden. Die aus DFT-Berechnungen gewonnenen geometrieoptimierten Strukturen lassen nur geringfügig unterschiedliche Anordnungen der PBI-Farnstoffe erkennen, welche durch die verschiedenen Linker-Einheiten verursacht werden. Durch die resultierenden optischen Signaturen der Folda-Dimere Bis-PBIs 2-4, welche vom konventionellen Hj-Aggregat bis hin zu monomerenähnlichen Absorptionsmerkmalen reichen, konnte erstmals der experimentelle Nachweis eines PBI-basierten "Null-Aggregats" erbracht werden, bei dem sich JCoul und JCT vollständig gegenseitig kompensieren. Die Erkenntnisse dieses Kapitels verdeutlichen daher den erheblichen Einfluss der sogenannte kurzreichweitigen Exzitonen-Kopplung JCT auf die optischen Eigenschaften von PBI-Aggregaten. Im letzten Teil dieser Arbeit (Kapitel 6) wurden die Selbstorganisationsprozesse in klar definierten supramolekularen Aggregatstrukturen untersucht. Durch die systematische Verlängerung der Linker-Einheiten von 7 auf 15 Å, konnten durch Selbstorganisation unterschiedliche Aggregatstrukturen von hochdefinierten PBI-Viererstapeln bis hin zu längeren PBI-Oligomeren generiert werden. Zusammenfassend wurde in dieser Arbeit eine detaillierte Übersicht des Selbstorganisationsverhaltens von neun kovalent verknüpften Bis-PBI-Farbstoffen vorgestellt, welche anschließend hinsichtlich ihrer Struktur-Eigenschafts-Beziehung untersucht wurden. Die Ergebnisse bestätigen eine starke Excitonen-Kopplung in verschiedenen Bis-PBI-Aggregaten wie z.B. PBI-Folda-Dimeren oder hochdefinierten PBI-Viererstapeln, welche die optischen Eigenschaften der Farbstoffsysteme im aggregierten Zustand signifikant beeinflusst. KW - Supramolekulare Chemie KW - Perylenderivate KW - Selbstorganisation KW - perylene bisimide dimers KW - folda-dimer KW - null-aggregate KW - exciton dynamics KW - short-range JCT-coupling KW - spacer-controlled self-assembly KW - Elektronentransfer KW - Farbstoff KW - NMR-Spektroskopie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173005 ER - TY - THES A1 - Seaf, Shaimaa Fayez Ali Mohammed T1 - Isolation, structural elucidation, and biological evaluation of Naphthylisoquinoline alkaloids from two African Ancistrocladus species T1 - Isolierung, Strukturaufklärung und Untersuchungen zum Wirkmechanismus von Naphthylisochinolin-Alkaloiden aus zwei afrikanischen Ancistrocladus-Arten N2 - The indepth metabolic profiling of the crude extracts of two African Ancistrocladus species viz. A. likoko from Central Africa and A. abbreviatus from West Africa, resulted in a total of 87 alkaloids among them 54 new ones. All of the compounds were intensely elucidated by 1D and 2D NMR, HRESIMS, as well as chemical and chiroptical techniques. Among the newly discovered compounds are quinoid naphthylisoquinolines with an ortho-diketone in the naphthalene portion, nor-naphthylisoquinoline alkaloid lacking the always present methyl group at C-1, seco-(ring cleaved) naphthylisoquinolines, and a newly discovered class of natural products called the naphthylisoindolinones. Some of the compounds displayed strong antitumoral activities against human pancreatic cancer cells and leukemia cells in-vitro. N2 - Naturstoffe aus terrestrischen, marinen und mikrobiellen Organismen werden seit langem in der Behandlung vieler Krankheiten eingesetzt.[18] Sie spielen eine Schlüsselrolle bei der Suche und Entwicklung neuer Arzneistoffe, da sie die Grundlage für viele der derzeit kommerziell verwendeten Medikamente darstellen.[68-70] Die Natur bleibt eine wertvolle und nachhaltige Quelle für neuartige Wirkstoffe. Der Einsatz hocheffizienter chemischer, chromatographischer und spektroskopischer Methoden für die Entdeckung neuer bioaktiver Naturstoffe ist dabei von zentraler Bedeutung. Eine vielversprechende Klasse von Naturstoffen sind die Naphthylisochinolin-Alkaloide, die weiterhin neue und wichtige Leitsubstanzen gegen verschiedene Erkrankungen wie Krebs, Malaria und AIDS liefern. Im Rahmen dieser Dissertation wurde durch eingehende Analyse ihrer Rohextrakte ein detailliertes Profil der Sekundärmetabolite zweier bislang wenig untersuchter Ancistrocladus-Arten, A. likoko und A. abbreviatus, erstellt. Dies führte zur Entdeckung einer Vielzahl an Alkaloiden (insgesamt 86 Verbindungen, darunter 53 neue Naturstoffe), und auch zu mehrere neuen NIQ-Unterklassen. Einige der Verbindungen zeigten starke zytotoxische Wirkungen gegen Krebszellen sowie antiplasmodiale Aktivitäten. KW - Naphthylisochinolinalkaloide KW - Naphthylisoquinoline alkaloids KW - Ancistrocladaceae KW - A. likoko KW - A. abbreviatus KW - seco-NIQs-Naphthylisoindolinone KW - alkaloids-Quinoid KW - NIQs Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-191588 ER - TY - JOUR A1 - Tshitenge, Dieudonné Tshitenge A1 - Feineis, Doris A1 - Mudogo, Virima A1 - Kaiser, Marcel A1 - Brun, Reto A1 - Bringmann, Gerhard T1 - Antiplasmodial Ealapasamines A-C,'Mixed' Naphthylisoquinoline Dimers from the Central African Liana Ancistrocladus ealaensis JF - Scientific Reports N2 - Three unusual heterodimeric naphthylisoquinoline alkaloids, named ealapasamines A-C (1–3), were isolated from the leaves of the tropical plant Ancistrocladus ealaensis J. Léonard. These ‘mixed’, constitutionally unsymmetric dimers are the first stereochemically fully assigned cross-coupling products of a 5,8′- and a 7,8′-coupled naphthylisoquinoline linked via C-6′ in both naphthalene portions. So far, only two other West and Central Ancistrocladus species were known to produce dimers with a central 6,6″-axis, yet, in contrast to the ealapasamines, usually consisting of two 5,8′-coupled monomers, like e.g., in michellamine B. The new dimers 1–3 contain six elements of chirality, four stereogenic centers and the two outer axes, while the central biaryl axis is configurationally unstable. The elucidation of the complete stereostructures of the ealapasamines was achieved by the interplay of spectroscopic methods including HRESIMS, 1D and 2D NMR (in particular ROESY measurements), in combination with chemical (oxidative degradation) and chiroptical (electronic circular dichroism) investigations. The ealapasamines A-C display high antiplasmodial activities with excellent half-maximum inhibition concentration values in the low nanomolar range. KW - structure elucidation KW - stereochemistry KW - Ancistrocladus ealaensis KW - dimers Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-170645 VL - 7 IS - 5767 ER - TY - THES A1 - Herbst [geb. Höhne], Stefanie T1 - Liquid Crystalline Perylene Bisimide Assemblies T1 - Flüssigkristalline Perylenbisimid Strukturen N2 - Thus, the main focus of this thesis was to generate and investigate new one-dimensional LC PBI J-aggregates of an entirely new PBI organization with the transition dipole moments of the chromophores arranged parallel to the columnar axis and in slipped pi-pi stacking fashion to form highly fluorescent J-aggregates. Towards this goal, the tetra-bay substituted PBI 4c bearing free NH functional groups at the imide positions and four dendrons with branched ethylhexyl alkoxy chains at the meta-position of the phenoxy spacer (Figure 8.1a) was synthesized and compared to a literature known reference PBI 1. The mesogenic dendrons ensure LC character of the dye, which was confirmed by POM, DSC and extensive X-ray analysis. Furthermore, the sterically demanding bay-substituents prevent the cofacial assembly of the chromophores and force the dyes into a slipped pi-stacked order with the main transition dipole moments of the dyes oriented parallel to the columnar axis. X-ray analysis revealed that PBI 4c assembles into columnar triple-stranded helices consisting of side-to-side stacked molecules, which organize into a Colh phase (Figure 8.1b). FT-IR experiments of a thin film and aggregates in MCH solution confirmed the formation of H-bonds between the imide moieties. Temperature-dependent investigations furthermore proved a reversible formation of H-bonds and polarized FT-IR experiments finally gave evidence for the direction of the H-bonds along the shearing respective the columnar axis (Figure 8.1c). This was additionally verified by polarized UV-Vis absorption studies of aligned thin films. The changes in the UV-Vis absorption spectra of concentration- and temperature-dependent experiments in MCH are in agreement with the formation of J-aggregates and could be fitted to a nucleation-elongation growth mechanism. Remarkably, fluorescence spectroscopy studies revealed highly emissive aggregates in solution. These various spectroscopic techniques proved the utilization of directional noncovalent forces like hydrogen-bonding and pi-pi interactions in a cooperative manner forcing the PBI molecules in an unprecedented organization of a slipped pi-stacked arrangement with the orientation of the molecular axis and the respective transition dipole moments parallel to the columns of the LC phase. By the group of Dietrich the formation of exciton-polaritons in imprinted LC pillar microcavities as consequent use of the LC 4c was reported for the first time.In the second part of this thesis the hierarchical organization of LC PBIs into defined single-, double-, triple- and quadruple-stranded J-aggregates within crystalline and columnar LC phases, partially arranged in helical supramolecular structures in dependence of the molecular design was demonstrated. This was achieved via the preparation of a library of twelve molecules PBI 3-6(a-c) (Figure 8.2a) that was synthesized by varying the substitution position of the dendrons at the phenoxy-spacer from ortho to meta or para and by introducing an additional methyl group in ortho-position. Also the length and shape of the alkoxy chains was changed. Consequently, the impact of the sterical demand of the bay substituents concerning their phase properties, molecular arrangement and exciton coupling was investigated. POM, DSC and X-ray studies revealed the formation of only crystalline phase for the ortho-substituted PBIs 3a-c, whereas the other derivatives generated SC or LC phases. The main focus was the series with the n-C12-alkoxy chains. For the corresponding PBIs 4-6b columnar LC phases were confirmed. Retrostructural analysis by modelling and simulations gave indications for a single stranded organization for PBI 3b, a double-stranded helix for PBI 6b, a triple-stranded helical arrangement for PBI 5b and a quadruple-stranded helix for PBI 4b (Figure 8.2b-d). For all four derivatives the same molecular orientation within the columns as for PBI 4c was proven by polarized FT-IR and UV-Vis absorption studies in aligned thin films. The organization in helices of different number of strands in the Cr and LC phases of PBI 3b, 4b, 5b and 6b offered a unique possibility to elucidate the influence of particular packing arrangements on dye aggregate interactions with light. In particular, it can be investigated how exciton coupling of the dyes’ transition dipole moments and fluorescence properties are affected. In this context, the spectroscopic properties were investigated in thin film, which revealed a strong bathochromic shift of the absorption maxima compared to the monomers in solution in dependence on the number of strands for PBIs 4-6b in contrast to PBI 3b (Figure 8.2e). The same tendency was observed for the respective aggregates in MCH solution. The spectral changes obtained during concentration- and temperature-dependent UV-Vis absorption studies verified the formation of J-aggregates in MCH solution and solid state. The respective aggregates are highly likely formed via a nucleation-elongation growth mechanism. Appliance of Kasha’s exciton theory on the supramolecular aggregates revealed different contributions of H- and J-type coupling for the oligo-stranded helices. Under these considerations, it delivered an explanation for the absorption and fluorescence properties of the assemblies and declares the “best” J-aggregate for the double stranded arrangement of PBI 6b with purely negative couplings among neighbour molecules and a quantum yield above 74 % of the aggregates in MCH solution. With this H-bonded PBI-based library approach of twelve derivatives it could be shown how molecular engineering of perylene bisimide dyes can be used to design defined, complex supramolecular assemblies with unprecedented packing patterns and concomitant intriguing spectroscopic properties. So far, the formation of defined liquid crystalline supramolecular structures of tetra-bay substituted PBIs by double H-bonding between free imide moieties and pi-pi interactions between the chromophores was demonstrated. The impact of the H-bonds on the molecular arrangement was investigated in the next part of this thesis. In this regard, PBIs 7 and 8 bearing a methyl or cyclohexyl group at the imide position (Figure 8.3a) were synthesized and compared to PBI 4c. The soft character of the solid state for PBIs 7 and 8 was confirmed by POM, DSC and X-ray analysis. The X-ray studies further revealed for both PBIs a change of the molecular assembly towards helical columnar structures of conventional pi-stacked chromophores (Figure 8.3b) when the directed H-bonds cannot contribute as noncovalent interactions to the assembly formation. Temperature-dependent UV-Vis absorption studies demonstrated the importance of H-bonding in MCH solution in the way that the formation of J-aggregates as for PBI 4c could not be observed for the imide substituted molecules. In the next step, the spectroscopic properties in thin film were investigated. For PBI 7 a J-type band and fluorescence spectra with an enlarged Stokes shift and increased fluorescence lifetime of 11.4 ns, compared to PBI 4c, was obtained, suggesting the generation of excimer type emission by considering the assumed conventional stacking of rotational displaced molecules from X-ray analysis. With polarized UV-Vis absorption experiments the orientation of the molecules perpendicular to the shearing direction and subsequently to the columnar axis was confirmed. These diverse investigations clearly demonstrated the imperative of H-bonds for stable, defined, LC J-aggregates with the transition dipole moments parallel to the columnar axis. With PBIs 7 and 8 it is impressively shown how small changes in the molecular structure influence the molecular arrangement dependent on the cooperation of non-covalent interactions like H-bonding and pi-pi stacking. In the last part of this thesis the generation of two-dimensional LC arrangements is presented. Since tetra-bay substituted PBIs lead always to twisted cores preventing lamellar arrangement, here 1,7-disubstitution and the simultaneous retention of the free imide positions was chosen to generate LC lamellar phases of PBIs 9a, 9b and 10 (Figure 8.4a). This molecular design was expected to form planar perylene cores that can strongly interact by pi-pi stacking and H-bonding. POM, DSC and X-ray investigations of the compounds suggest lamellar LC phases for PBIs 9a and 9b and a soft phase for PBI 10. In this regard, the goal of the formation of LC lamellar phase of PBIs could be attained. The change from dendrons with n-C12-alkoxy chains to large fork-like mesogens like in 9b clearly changed the phase properties. PBI 9b exhibits the lowest clearing point, high phase stability, least viscosity, easy shearability at room temperature and phase transitions between lamellar and Colh phases dependent on temperature. The formation of H-bonds parallel to the layers was demonstrated by polarized FT-IR experiments for all three PBIs. Concentration-dependent UV-Vis absorption studies revealed the formation of a J-type aggregate, which seems to exhibit an overall two-dimensional structure. With STM investigations the formation of lamellar structures from drop-casted 9a and 10 solutions in 1-phenyloctane on HOPG surface could be observed. Figure 8.4b illustrates a schematic possible arrangement of the molecules in the layers (here exemplarily demonstrated for PBI 9a), which has to be further confirmed by modelling and simulations. Unfortunately, fluorescence investigations of the thin films revealed non- or only slightly emissive LC states, which make them negligible for photonic applications. Nevertheless, the synthesized and analyzed compounds might be an inspiration for further investigations on the path to two-dimensional exciton transport for photonic devices. N2 - Das Hauptaugenmerk dieser Arbeit war daher darauf gerichtet, eindimensionale flüssigkristalline J-Aggregate zu erzeugen und zu untersuchen, die eine vollkommen neue Anordnung von Perylenbisimiden aufweisen und deren Übergangsdipolmomente parallel zur Säulenachse ausgerichtet sind. Um stark fluoreszierende J-Aggregate zu bilden, sollen die Moleküle zudem in einer zueinander verschobenen pi-pi-Stapelung angeordnet sein. Um dieses Ziel zu erreichen, wurde zunächst das vierfach bucht-substituierte PBI 4c synthetisiert und mit dem literaturbekannten Referenzmolekül (PBI 1) verglichen. Das PBI 4c weist dabei freie NH-Gruppen in den Imidpositionen und vier verästelte Substituenten in der meta-Position der Phenoxygruppe auf (Abbildung 1a). Die Substituenten bestehen dabei aus jeweils drei verzweigten Ethylhexyl-Alkoxyketten. Diese mesogenen Substituenten stellen den flüssigkristallinen Charakter des Farbstoffmoleküls sicher, was durch POM, DSC und umfassende Röntgenstrukturuntersuchungen bestätigt werden konnte. Weiterhin verhindern die sterisch anspruchsvollen Buchtsubstituenten eine cofaciale Anordnung der Chromophore und zwingen die Farbstoffmoleküle in zueinander verschobene, pi-gestapelte Packungsstrukturen, in denen die Übergangsdipolmomente der Perylenbisimide parallel zur Säulenachse angeordnet sind. Die Analyse der Röntgenstrukturuntersuchungen zeigt die Bildung säulenartiger, drei-strängiger Helices, die sich aus vertikal gestapelten Molekülen zusammensetzen und sich letztendlich in einer hexagonalen flüssigkristallinen Phase anordnen (Abbildung 1b). FT-IR-Experimente dünner Schichten und der Aggregate in MCH-Lösungen bestätigen, dass zwischen den Imidgruppen in der flüssigkristalline Phase und der Aggregate in Lösung die gleiche Art von Wasserstoffbrückenbindungen existiert. Durch polarisierte FT-IR-Experimente und temperaturabhängige Untersuchungen konnte weiterhin gezeigt werden, dass die Wasserstoffbrückenbindungen in diesen Systemen zum Einen entlang der Scherrichtung und der Säulenachse ausgerichtet sind und deren Bildung zum Anderen reversibel ist. Die Ausrichtung wurde zusätzlich durch polarisierte UV-Vis-Absorptionsuntersuchungen an gerichteten Dünnschichten bestätigt. Die spektralen Änderungen in konzentrations- und temperaturabhängigen UV-Vis-Absorptionsstudien in MCH stimmen mit der Bildung von J-Aggregaten überein. Die Daten konnten durch Ausgleichskurven einem kooperativen (Kernbildungs-Verlängerungs-) Mechanismus zugeordnet werden. Bemerkenswerterweise zeigten Fluoreszenzuntersuchungen, dass die Aggregate in Lösung sehr stark emittieren. Die verwendeten spektroskopischen Untersuchungsmethoden beweisen die strukturellen Einflussmöglichkeiten über gerichtete, nicht-kovalente Kräfte wie Wasserstoff-brückenbindungen und pi-pi-Wechselwirkungen in einem kooperativen Zusammenspiel zur gezielten Bildung einer bisher unbekannten Molekülanordnung in Flüssigkristallen. In dieser neuen Struktur sind die Moleküle zueinander verschoben pi-gestapelt und mit der Molekülachse und dem entsprechenden Übergangsdipolmomentes parallel zur Säulenachse ausgerichtet. Unter Verwendung von PBI 4c konnten unsere Kooperationspartner in der Technischen Physik der Universität Würzburg in der Folge erstmalig über die Bildung von Exziton-Polaritonen in aufgedruckten, flüssigkristallinen Säulenmikrokavitäten berichten.[175] Im zweiten Teil dieser Arbeit wird gezeigt, wie sich durch molekulares Design definierte ein-, zwei-, drei- und viersträngige J-Aggregate innerhalb kristalliner oder kolumnarer flüssigkristalliner Phasen bilden. Diese Aggregate bilden hierarchisch aufgebaute, supramolekulare Strukturen, die sich zu einem großen Teil in Helices organisieren. Hierfür wurden Verbindungen für eine Bibliothek, bestehend aus zwölf Molekülen PBI 3-6(a-c) (Abbildung 2a), synthetisiert, indem die Position der verästelten Substituenten an den Phenoxygruppen zwischen ortho, meta und para variiert wurde. Zusätzlich wurde noch eine Methylgruppe in ortho-Position eingeführt sowie sowohl die Länge als auch die Art der Alkoxyketten geändert. Anschließend wurde der Einfluss des sterischen Anspruchs der Buchtsubstituenten in Bezug auf die Eigenschaften der Phasen, der Molekülanordnung und der Exzitonenkopplung untersucht. POM, DSC and Röntgenstrukturanalysen bestätigten, dass die ortho-substituierten PBIs 3a-c nur kristalline Phasen ausbildeten, wohingegen die anderen Derivate sowohl weichkristalline als auch flüssigkristalline Phasen generierten. Der Fokus lag dabei auf der Untersuchung der Serie mit n-C12-Alkoxyketten und ergab die Bildung säulenartiger, flüssigkristalliner Phasen für alle drei PBIs 4-6b. Das Erstellen von Aggregatmodellen unter Verwendung der röntgenkristallografischen Daten und die Simulation von Röntgenbeugungsbildern mit Hilfe dieser Modelle ergaben eindeutig die Bildung einer einsträngigen Molekülanordnung für PBI 3b, eine Doppelstranghelix für PBI 6b, eine dreisträngige, helikale Anordnung für PBI 5b und einer viersträngigen Helix von PBI 4b (Abbildung 2b-d). Polarisierte FT-IR und UV-Vis Absorptionsexperimente bewiesen für alle vier Derivate die gleiche molekulare Orientierung in gerichteten dünnen Schichten wie bereits für PBI 4c. Die aus den Röntgenmessungen hergeleiteten Anordnungen in Helices bestehend aus einer unterschiedlichen Anzahl von Strängen in kristallinen und flüssigkristallinen Phasen von PBI 3-6b eröffneten eine einzigartige Möglichkeit, den Einfluss der molekularen Packung auf die Wechselwirkungen der Farbstoffaggregate mit Licht aufzuklären. Im Besonderen sollte dabei der Einfluss in Bezug auf die Exzitonenkopplung der Übergangsdipolmomente der Farbstoffmoleküle in UV-Vis-Absorptionsspektren und Fluoreszenzeigenschaften untersucht werden. In diesem Zusammenhang wurden die spektroskopischen Eigenschaften der Derivate in Dünnschichten untersucht. Mit Ausnahme von PBI 3b wurde eine stark bathochrome Verschiebung der Absorptionsmaxima in Abhängigkeit der Anzahl der Stränge im Vergleich zu den Absorptionsmaxima der entsprechenden Monomere in Lösung beobachtet (Abbildung 2e). Die gleiche Tendenz konnte auch für die entsprechenden Aggregate in Lösung beobachtet werden. Die festgestellten spektralen Änderungen in konzentrations- und temperatur-abhängigen Absorptionsstudien in MCH-Lösungen bestätigten die Bildung von J-Aggregaten sowohl in Lösung als auch in der Festphase. Die Anwendung von Kashas Exzitonentheorie auf die supramolekularen Aggregate zeigte, dass H- und J-Kopplungen in unterschiedlichen Teilen bei den mehrsträngigen Helices auftreten. Diese Ergebnisse lieferten auch eine Erklärung für die Absorptions- und Fluoreszenzeigenschaften der Aggregate und ergaben, dass die doppelsträngige Helix von PBI 6b mit einer Fluoreszenzquantenausbeute von über 74 % das „beste“ J-Aggregat aller getesteten Derivate bildet, da in diesem nur Anteile reiner J-Kopplungen („negativer“ Kopplungen) zwischen benachbarten Molekülen auftreten. Durch den Ansatz einer Bibliothek von zwölf über Wasserstoffbrücken verbundener PBIs konnte gezeigt werden, inwieweit der zielgerichtete strukturelle Aufbau von PBI-Farbstoffmolekülen genutzt werden kann, um definierte, hochkomplexe Strukturen mit einer bisher unbekannten molekularen Anordnung und gleichzeitig sehr interessanten spektroskopischen Eigenschaften zu erzeugen. Bis hier wurde gezeigt, wie definierte, flüssigkristalline, supramolekulare Strukturen von vierfach buchtsubstituierten PBIs durch das Zusammenwirken von Wasserstoffbrücken-bindungen zwischen den Imidpositionen und pi-pi-Wechselwirkungen zwischen den Chromophoren gebildet werden können. Der Einfluss der Wasserstoffbrückenbindungen sollte dabei im nächsten Teil näher untersucht werden. Diesbezüglich wurden PBI 7 und 8 synthetisiert, die entsprechend jeweils Methyl- oder Cyclohexylgruppen in den Imidpositionen tragen (Abbildung 3a). Anschließend wurden diese mit PBI 4c verglichen. POM, DSC und Röntgenstrukturuntersuchungen bestätigten die Bildung einer weichen Phase für PBI 7 und 8. Weiterhin ergaben die Röntgenbeugungsexperimente für beide PBIs eine Änderung der molekularen Anordnung zu helikalen, säulenartigen Aggregaten, in denen die Chromophore pi-gestapelt organisiert sind (Abbildung 3b), wenn die Wasserstoffbrückenbindungen nicht mehr als Wechselwirkungen zur Aggregatbildung beitragen können. Temperaturabhängige UV-Vis-Absorptionsstudien verdeutlichten die Relevanz der Wasserstoffbrückenbindungen in MCH-Lösungen für die Bildung von stabilen J-Aggregaten. Anders als für PBI 4c konnte die Ausbildung von J-Aggregaten in Lösung für die beiden anderen Derivate nicht beobachtet werden. Im nächsten Schritt wurden die spektroskopischen Eigenschaften in Dünnschichten untersucht. Für PBI 7 konnte eine J-artige Bande und ein Fluoreszenzspektrum mit einer besonders großen Stokesverschiebung und einer sehr langen Fluoreszenzlebensdauer im Vergleich zu den Daten von PBI 4c detektiert werden. Unter Beachtung der molekularen Anordnung von konventionell gestapelten, zueinander verdrehten Molekülen, die aus Röntgenstrukturanalysen hergeleitet wurde, deuten diese Ergebnisse auf die Erzeugung einer excimerartigen Emission hin. Die Anordnung der Moleküle senkrecht zur Scherrichtung und demzufolge auch senkrecht zur Säulenachse wurde mittels polarisierter UV-Vis-Absorptionsmessungen untermauert. Diese unterschiedlichen Untersuchungsmethoden deuten gemeinsam darauf hin, wie zwingend erforderlich Wasserstoffbrückenbindungen für die Bildung definierter, flüssigkristalliner J-Aggregate sind, in denen die Übergangsdipolmomente der Chromophore parallel zur Säulenachse ausgerichtet sind. Mit der Synthese von PBI 7 und 8 konnte eindrucksvoll gezeigt werden, wie bereits kleine Änderungen in der Molekülstruktur einen großen Einfluss auf die Aggregatstruktur haben können, wenn diese vom Zusammenwirken verschiedener nichtkovalenter Wechselwirkungen wie Wasserstoffbrückenbindungen und pi-pi Wechselwirkungen abhängig ist. Der letzte Teil dieser Arbeit handelt von der Bildung zweidimensionaler flüssigkristalliner Anordnungen. Da vierfach buchtsubstituierte PBIs immer eine Verdrehung des Kernes hervorrufen und damit die Bildung lamellarer Strukturen verhindern, wurde hier der Ansatz der Reduzierung auf eine 1,7-Zweifachsubstitution unter gleichzeitiger Beibehaltung der freien Imidgruppen gewählt. Von diesem molekularen Design wurde erwartet, dass die planaren Perylenkerne über pi-pi-Wechselwirkungen und Wasserstoffbrückenbindungen stark miteinander wechselwirken und somit zweidimensionale Aggregate bilden können. POM, DSC und Röntgenstrukturanalysen bestätigen die Bildung lamellarer flüssigkristalliner Phasen von PBI 9a und 9b (Abbildung 4a) und einer weichen Phase von PBI 10. Der Austausch der Substituenten, die n-C12-Alkoxyketten tragen, durch gabelartige Mesogene, wie bei PBI 9b, bewirkt deutliche Änderungen der Phaseneigenschaften. PBI 9b weist den niedrigsten Klärpunkt, die höchste Phasenstabilität, die geringste Viskosität, leichte Scherbarkeit bei Raumtemperatur und interessante Phasenübergänge zwischen lamellaren und säulenartig hexagonalen Phasen in Abhängigkeit der Temperatur auf. Die Bildung von Wasserstoffbrückenbindungen parallel zu den Schichten konnte mit polarisierten FT-IR-Experimenten für alle drei Derivate gezeigt werden. Konzentrationsabhängige UV-Vis-Absorptionsuntersuchungen bestätigten die Ausbildung eines J-artigen Aggregates in MCH-Lösung, welches eine zweidimensionale Struktur aufzuweisen scheint. Mittels STM-Untersuchungen konnten lamellare Strukturen von PBI 9a und 10 Schichten in 1-Phenyloktan auf hochgeordnetem pyrolytischem Graphit beobachtet werden. Abbildung 4b veranschaulicht die Anordnung der Moleküle in den Schichten, in diesem Fall exemplarisch für PBI 9a gezeigt. Leider haben Fluoreszenzuntersuchungen gezeigt, dass die Dünnschichten keine oder eine nur sehr geringe Emission aufweisen und somit nicht für photonische Anwendungen geeignet sind. Nichtsdestotrotz könnten diese Verbindungen Inspirationen für weitere Untersuchungen sein und Ansatzpunkte liefern, das Ziel eines zweidimensionalen Exzitonentransportes für photonische Anwendungen zu erreichen. KW - Flüssigkristall KW - Perylenderivate KW - Liquid Crystal KW - Perylene Bisimide KW - J-Aggregate KW - Flüssigkristall KW - Liquid Crystals KW - Perylene Bisimides KW - Perylenbisimide Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164857 ER - TY - INPR A1 - Stennett, Tom E. A1 - Bissinger, Philipp A1 - Griesbeck, Stefanie A1 - Ullrich, Stefan A1 - Krummenacher, Ivo A1 - Auth, Michael A1 - Sperlich, Andreas A1 - Stolte, Matthias A1 - Radacki, Krzysztof A1 - Yao, Chang-Jiang A1 - Würthner, Frank A1 - Steffen, Andreas A1 - Marder, Todd B. A1 - Braunschweig, Holger T1 - Near-Infrared Quadrupolar Chromophores Combining Three-Coordinate Boron-Based Superdonor and Superacceptor Units T2 - Angewandte Chemie, International Edition N2 - In this work, two new quadrupolar A-π-D-π-A chromophores have been prepared featuring a strongly electron- donating diborene core and strongly electron-accepting dimesitylboryl F(BMes2) and bis(2,4,6-tris(trifluoromethyl)phenyl)boryl (BMes2) end groups. Analysis of the compounds by NMR spectroscopy, X-ray crystallography, cyclic voltammetry and UV-vis-NIR absorption and emission spectroscopy indicated that the compounds possess extended conjugated π-systems spanning their B4C8 cores. The combination of exceptionally potent π-donor (diborene) and π- acceptor (diarylboryl) groups, both based on trigonal boron, leads to very small HOMO-LUMO gaps, resulting in strong absorption in the near-IR region with maxima in THF at 840 and 1092 nm, respectively, and very high extinction coefficients of ca. 120,000 M-1cm-1. Both molecules also display weak near-IR fluorescence with small Stokes shifts. KW - boron KW - near-IR chromophores KW - conjugation KW - low-valent compounds KW - synthesis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-180391 N1 - This is the pre-peer reviewed version of the following article: T. E. Stennett, P. Bissinger, S. Griesbeck, S. Ullrich, I. Krummenacher, M. Auth, A. Sperlich, M. Stolte, K. Radacki, C.-J. Yao, F. Wuerthner, A. Steffen, T. B. Marder, H. Braunschweig, Angew. Chem. Int. Ed. 2019, 58, 6449. , which has been published in final form at https://doi.org/10.1002/anie.201900889. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. ER - TY - THES A1 - Riese, Stefan T1 - Photophysics and Spin Chemistry of Donor-Acceptor substituted Dipyrrinato-Metal-Complexes T1 - Photophysik und Spin-Chemie in Donor-Akzeptor substituierten Dipyrrinato-Metall-Komplexen N2 - In this thesis, the photophysics and spin chemistry of donor-photosensitizer-acceptor triads were investigated. While all investigated triads comprised a TAA as an electron donor and a NDI as an electron acceptor, the central photosensitizers (PS) were different chromophores based on the dipyrrin-motif. The purity and identity of all target compounds could be confirmed by NMR spectroscopy, mass spectrometry and elemental analysis. The first part of the work dealt with dipyrrinato-complexes of cyclometalated heavy transition metals. The successful synthesis of novel triads based on Ir(III), Pt(II) and Pd(II) was presented. The optical and electrochemical properties indicated charge separation (CS), which was confirmed by transient absorption (TA) spectroscopy. TA-spectroscopy also revealed that the process of CS is significantly slower and less efficient for the triads based on Pt(II) and Pd(II) than for the analogous Ir(III) triads. This is mostly due to a much more convoluted reaction pathway, comprising several intermediate states before the formation of the final charge separated state (CSS2). On the other hand, CSS2 exhibits long lifetimes which are dependent on the central metal ion. While the Ir(III) triads show lifetimes of about 0.5 µs in MeCN, the Pt(II) and Pd(II) analogues show lifetimes of 1.5 µs. The magnetic field effect on the charge recombination (CR) kinetics of CSS2 was investigated by magnetic field dependent ns-TA spectroscopy and could be rationalized based on a classical kinetic scheme comprising only one magnetic field dependent rate constant k±. The behavior of k± shows a clear separation of the coherent and incoherent spin interconversion mechanisms. While the coherent spin evolution is due to the isotropic hyperfine coupling with the magnetic nuclei of the radical centers, the incoherent spin relaxation is due to a rotational modulation of the anisotropic hyperfine coupling tensor and is strongly dependent on the viscosity of the solvent. This dependence could be used to measure the nanoviscosity of the oligomeric solvent pTHF, which was found to be distinctly different from its macroviscosity. The second part of the work dealt with bisdipyrrinato complexes and their bridged porphodimethenato (PDM) analogues. Initially, the suitability of the different chromophores for the use as PS in donor-acceptor substituted triads was tested by a systematic investigation of their steady state and transient properties. While the PDM-complex of Zn(II) and Pd(II) exhibited promising characteristics such as a high exited state lifetime and relatively intense emission, the purely organic parent PDM and the non-bridged bisdipyrrinato-Pd(II) complex were less suitable. The difference between the two Pd(II) complexes could be explained by a structural rearrangement of the non-bridged complex which results in a non-emissive metal centered triplet state with disphenoidal geometry. This rearrangement is prevented by the dimethylmethylene-bridges in the bridged analogue resulting in higher phosphorescence quantum yields and excited state lifetimes. With the exception of the Zn(II)PDM-complex, the synthesis of novel donor acceptor substituted triads could be realized for all desired central chromophores. They were investigated equivalently to the cyclometalated triads described in the first part. The steady state properties indicate a stronger electronic coupling between the subunits due to the lack of unsaturated bridges between the donor and the central chromophore. Photoinduced CS occurs in all investigated triads. Due to the low exited state lifetimes of the central chromophores, CSS is formed less efficiently for the triads based on the unbridged Pd(II)-complex as well as the purely organic PDM. In the triad based on the bridged Pd(II) complex, the CR of CSS2 is faster than its formation resulting in low intermediate concentrations. For its elongated analogue, this is not the case and CSS2 can be observed clearly. Although the spin-chemistry of the triads based on bisdipyrrinato-Pd(II) and porphodimethenato-Pd(II) is less well understood, first interpretations of the magnetic field dependent decay kinetics gave results approximately equivalent to those obtained for the cyclometalated triads. Furthermore, the MFE was shown to be useful for the investigation of the quantum yield of CS and the identity of the observed CSSs. In both parts of this work, the influence of the central photosensitizer on the photophysics and the spin chemistry of the triads could be shown. While the process of CS is directly dependent on the PS, the PS usually is not directly involved in the final CSSs. None the less, it can still indirectly affect the CR and spin chemistry of the CSS since it influences the electronic coupling between donor and acceptor, as well as the geometry of the triads. N2 - In der vorliegenden Arbeit wurden die Photophysik und Spinchemie von Donor-Photosensibilisator-Akzeptor-Triaden untersucht. In allen untersuchten Triaden wurden Triarylamin (TAA) bzw. Naphthalindiimid (NDI) als Elektronen-Donor bzw. -Akzeptor verwendet. Der zentrale Photosensibilisator (PS) hingegen wurde variiert, behielt allerdings das Dipyrrin-Chromophor als gemeinsames Strukturmotiv bei. Alle Zielverbindungen wurden mittels NMR-Spektroskopie, Massenspektrometrie und Elementaranalyse auf Identität und Reinheit geprüft. Der erste Abschnitt der Arbeit beschäftigte sich mit cyclometallierten Dipyrrinato-Komplexen schwererer Übergangsmetalle. Die erfolgreiche Synthese von neuartigen Triaden mit Ir(III)-, Pt(II)- und Pd(II)- Zentralionen wurde beschrieben. Die optischen und elektrochemischen Eigenschaften der Verbindungen deuteten auf das Auftreten von Ladungstrennung hin was mit Hilfe transienter Absorptionsspektroskopie (TA) bewiesen werden konnte. Weiterhin ergab die Untersuchung der Stoffe, dass die Ladungstrennung in den Triaden mit Pd(II) und Pt(II) als Zentralion wesentlich langsamer und weniger effizient abläuft als in den analogen Verbindungen mit Ir(III) als Zentralion. Der resultierende ladungsgetrennte Zustand (CSS2) weist eine hohe Lebenszeit auf, welche vom Zentralatom abhängt. Für Ir(III) beträgt diese ungefähr 0.5 µs, während sie für Pt(II) und Pd(II) auf ca. 1.5 µs ansteigt. Der Einfluss eines externen Magnetfeldes auf die Kinetik der Ladungsrekombination (CR) wurde mittels magnetfeldabhängiger ns-TA-Spektroskopie untersucht. Der auftretende Magnetfeldeffekt (MFE) konnte mit Hilfe eines klassischen Modells auf eine einzige magnetfeldabhängige Geschwindigkeitskonstante k± zurückgeführt werden. Der Verlauf von k± zeigt eine deutliche Trennung der kohärenten und inkohärenten Spin-Flip-Mechanismen. Während die kohärente Spin-Umwandlung auf die isotrope Hyperfeinkopplung mit den magnetischen Nuklei der Radikalzentren zurückgeht, wird die inkohärente Spin Relaxation durch die Rotationsmodulation des anisotropen Hyperfeinkopplung-Tensors hervorgerufen und ist daher stark abhängig von der Viskosität des Lösungsmittels. Dieser Umstand wurde dazu genutzt die Nanoviskosität des polymeren Lösungsmittels pTHF zu messen, welche stark von der angegebenen Makroviskosität abweicht. Im zweiten Teil dieser Arbeit wurden zunächst mehrere Bisdipyrrinato-Metall-Komplexe sowie ihre verbrückten Porphodimethenato (PDM)-Analoga hinsichtlich ihrer Eignung als PS in Donor-Akzeptor-substituierten Triaden getestet. Während die verbrückten Zn(II)- und Pd(II)-Komplexe vielversprechende Eigenschaften wie langlebige angeregte Zustände und relativ intensive Emission aufweisen, erscheinen der unverbrückte Pd(II)-Komplex sowie der nicht komplexierte PDM-Ligand weniger geeignet. Der große Unterschied zwischen den beiden augenscheinlich ähnlichen Pd(II)-Komplexen ist auf eine strukturelle Reorganisation der Geometrie des unverbrückten Komplexes zurück zu führen. Diese resultiert in einem Metall-zentrierten Triplet-Zustand mit bisphenoidaler Geometrie, welcher schnell und strahlungslos in den Grundzustand übergeht. Im verbrückten Komplex hingegen verhindern die Dimethylmethylen-Brücken zwischen den beiden Dipyrrin-Chromophoren die strukturelle Umordnung und erhöhen daher die Lebenszeit und Quantenausbeute der Phosphoreszenz. Mit Ausnahme des Zn(II)-PDM-Komplexes konnten für alle geeigneten PS die entsprechenden Donor-Akzeptor substituierten Triaden synthetisiert werden. Diese wurden mit den bereits für die cyclometallierten Triaden beschriebenen Methoden untersucht. Da keine ungesättigte Verbindung zwischen Donor und PS vorhanden ist, sind die elektronischen Wechselwirkungen zwischen den einzelnen Untereinheiten nicht vernachlässigbar. In allen untersuchten Triaden konnte photo-induzierte Ladungstrennung (CS) nachgewiesen werden. Diese ist weniger effizient für Photosensibilisatoren in welchen der angeregte Zustand eine kurze Lebenszeit aufweist. Während für die Triade mit dem verbrückten Pd(II)-PDM-Komplex als PS, die CR von CSS2 schneller ist als seine Bildung, ist die Lebensdauer von CSS2 im verlängerten Anlog deutlich höher und CSS2 kann klar nachgewiesen werden. Obwohl die Spin-Chemie der Bisdipyrrinato- und Porphodimethenato-Triaden weniger gut untersucht wurden, ergab die Analyse der durchgeführten Magnetfeld-abhängigen Messung der CR-Kinetik Ergebnisse, die gut mit den Befunden für die cyclometallierten Triaden übereinstimmen. In beiden Teilen dieser Arbeit konnte der Einfluss des Photosensibilisators auf die Photophysik und Spin-Chemie der Triaden gezeigt werden. Während die CS direkt vom PS abhängt, ist dieser normalerweise nicht direkt am finalen CSS beteiligt. Dennoch kann der PS die CR und Spin-Chemie des ladungsgetrennten Zustandes indirekt beeinflussen, da er die elektronische Wechselwirkung zwischen Donor und Akzeptor sowie die Struktur der Triaden bestimmt. KW - Charge-transfer-Komplexe KW - Ladungstrennung KW - Lichtabsorption KW - Spin-chemistry KW - magnetic field effect KW - transient absorption KW - charge separation KW - charge recombination KW - radical ion pair KW - isotropic hyper fine coupling KW - spin relaxation KW - structural restriction Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-180228 ER - TY - THES A1 - Hecht [geb. Wagener], Reinhard Johannes T1 - Processing and Characterization of Bulk Heterojunction Solar Cells Based on New Organic n-Type Semiconductors T1 - Prozessierung und Charakterisierung von Bulk-Heterojucktion Solarzellen auf Basis von neuen organischen n-Halbleitern N2 - This thesis established the fabrication of organic solar cells of DA dye donors and fullerene acceptors under ambient conditions in our laboratory, however, with reduced power conversion efficiencies compared to inert conditions. It was shown that moisture had the strongest impact on the stability and reproducibility of the solar cells. Therefore, utilization of robust materials, inverted device architectures and fast fabrication/characterization are recommended if processing takes place in air. Furthermore, the dyad concept was successfully explored in merocyanine dye-fullerene dyads and power conversion efficiencies of up to 1.14 % and 1.59 % were measured under ambient and inert conditions, respectively. It was determined that the major drawback in comparison to comparable BHJ devices was the inability of the dyad molecules to undergo phase separation. Finally, two series of small molecules were designed in order to obtain electron transport materials, using the acceptor-core-acceptor motive. By variation of the acceptor units especially the LUMO levels could be lowered effectively. Investigation of the compounds in organic thin film transistors helped to identify promising molecules with electron transport properties. Electron transport mobilities of up to 7.3 × 10−2 cm2 V−1 s−1 (ADA2b) and 1.39 × 10−2 cm2 V−1 s−1 (AπA1b) were measured in air for the ADA and AπA dyes, respectively. Investigation of selected molecules in organic solar cells proved that these molecules work as active layer components, even though power conversion efficiencies cannot compete with fullerene based devices yet. Thus, this thesis shows new possibilities that might help to develop and design small molecules as substitutes for fullerene acceptors. N2 - In dieser Arbeit wurde gezeigt, dass die Herstellung und Charakterisierung von organischen Solarzellen auf Basis von kleinen DA-Farbstoffen in Kombination mit Fullerenakzeptoren unter Umgebungsbedingungen möglich ist. Außerdem konnte herausgefunden werden, dass die Luftfeuchtigkeit den größten Einfluss auf die Stabilität und die Reproduzierbarkeit der organischen Solarzellen hat. Aus diesem Grund sind der Austausch labiler Komponenten, die Verwendung von invertierten Bauteilarchitekturen sowie eine zügige Herstellung und Charakterisierung bei Prozessierung an Luft zu empfehlen. In weiteren Experimenten konnte das Dyadenkonzept erfolgreich angewendet werden, sodass sich Effizienzen von 1.14 und 1.59 % unter ambienten bzw. inerten Bedingungen messen ließen. Das Unvermögen der Dyaden, separate Phasen aus Donor- und Akzeptorverbindung zu bilden, konnte als größte Schwäche der Verbindungen ausgemacht werden. Schlussendlich wurden zwei Serien von Molekülen mit der Absicht Elektronentransportmaterialien zu generieren basierend auf einem Akzeptor-Kern-Akzeptor-Strukturmotiv entworfen. Die Variation der Akzeptoren ermöglichte in der Tat eine systematische Absenkung der Grenzorbitale und insbesondere der LUMO-Niveaus. Weiterhin wurden die Verbindungen in organischen Dünnfilmtransistoren untersucht, um mehr über ihre Ladungstransporteigenschaften zu erfahren. Dabei konnten Moleküle ausgemacht werden, die zum Elektronentransport an Luft in der Lage sind. Für die besten ADA- und AπA-Farbstoffe konnten so jeweils Elektronenmobilitäten von 7.3 × 10−2 cm2 V–1 s–1 (ADA2b) und 1.39 × 10−2 cm2 V–1 s–1 (AπA1b) gemessen werden. Weitere Untersuchungen von ausgewählten Verbindungen in organischen Solarzellen, konnten beweisen, dass diese neu kreierten Moleküle im Prinzip als Aktivmaterialien funktionieren können, wenn auch die erzielten Effizienzen noch nicht mit denen von Fulleren-basierten Solarzellen konkurrieren konnten. Damit zeigt diese Arbeit neue Möglichkeiten auf, die bei der Entwicklung und dem Design von kleinen Molekülen als Alternativen zu Fullereneakzeptoren hilfreich sein können. KW - organic solar cells KW - A-D-A dyes KW - dyads KW - merocyanines KW - n-type semiconductors KW - Heterosolarzelle KW - Halbleiter KW - Merocyanine Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161385 ER - TY - THES A1 - Kirchner, Eva T1 - Discrete Supramolecular Stacks by Self-Assembly and Folding of Bis(merocyanine) Dyes T1 - Definierte supramolekulare Stapel durch Selbstassemblierung und Faltung von Bis(merocyanin)-Farbstoffen N2 - The present thesis describes the development of a strategy to create discrete finite-sized supramolecular stacks of merocyanine dyes. Thus, bichromophoric stacks of two identical or different chromophores could be realized by folding of bis(merocyanine) dyes and their optical properties were discussed in terms of exciton theory. Quantum chemical calculations revealed strong exciton coupling between the chromophores within the homo- and hetero-π-stacks and the increase of the J-band of the hetero-dimers with increasing energy difference between the excited states of the chromophores could be attributed not only to the different magnitudes of transition dipole moments of the chromophores but also to the increased localization of the excitation in the respective exciton state. Furthermore, careful selection of the length of the spacer unit that defines the interplanar distance between the tethered chromophores directed the self-assembly of the respective bis(merocyanines) into dimers, trimers and tetramers comprising large, structurally precise π-stacks of four, six or eight merocyanine chromophores. It could be demonstrated that the structure of such large supramolecular architectures can be adequately elucidated by commonly accessible analysis tools, in particular NMR techniques in combination with UV/vis measurements and mass spectrometry. Supported by TDDFT calculations, the absorption spectra of the herein investigated aggregates could be explained and a relationship between the absorption properties and the number of stacking chromophores could be established based on exciton theory. N2 - Die vorliegende Arbeit beschreibt die Entwicklung einer Strategie zur Herstellung definierter supramolekularer Stapel aus Merocyaninfarbstoffen. So konnten Dimere bestehend aus zwei identischen oder unterschiedlichen Chromophoren durch Faltung von Bis(merocyanin)-Farbstoffen realisiert und ihre optischen Eigenschaften anhand von Exzitonentheorie diskutiert werden. Quantenchemische Rechnungen ergaben eine starke Exzitonenkopplung sowohl zwischen gleichartigen, als auch zwischen energetisch unterschiedlichen Merocyaninfarbstoffen und der Anstieg der J-Bande der Heterodimere mit zunehmender Energiedifferenz zwischen den angeregten Zuständen der Chromophore konnte nicht nur der unterschiedlichen Größe der Übergangsdipolmomente der Chromophore, sondern auch der zunehmenden Lokalisation der Anregung im jeweiligen Exzitonenzustand zugeschrieben werden. Darüber hinaus führte die sorgfältige Auswahl der Länge der Linkereinheit, welche den interplanaren Abstand zwischen den beiden Chromophoren im Bis(merocyanin) definiert, zur Selbstassemblierung zu Dimeren, Trimeren und Tetrameren, welche definierte π-Stapel bestehend aus vier, sechs oder acht Merocyaninchromophoren umfassen. Es konnte gezeigt werden, dass die Struktur solch großer supramolekularer Architekturen mittels allgemein zugänglicher Analyseverfahren, insbesondere der NMR-Technik in Kombination mit UV/vis-Messungen und Massenspektrometrie, aufgeklärt werden kann. Anhand der so etablierten Modellsysteme konnten schließlich die Absorptionseigenschaften definierter π-Stapel diskutiert und ein Zusammenhang mit der Anzahl der gestapelten Chromophore hergestellt werden. KW - Merocyanine KW - Exziton KW - Supramolekulare Struktur KW - Selbstorganisation KW - Merocyanine dyes KW - Exciton coupling KW - Supramolecular aggregates KW - Self-assembly KW - Exzitonenkopplung KW - Supramolekulare Aggregate KW - Selbstassemblierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159419 ER - TY - JOUR A1 - Pimentel-Elardo, Sheila M. A1 - Buback, Verena A1 - Gulder, Tobias A. M. A1 - Bugni, Tim S. A1 - Reppart, Jason A1 - Bringmann, Gerhard A1 - Ireland, Chris M. A1 - Schirmeister, Tanja A1 - Hentschel, Ute T1 - New Tetromycin Derivatives with Anti-Trypanosomal and Protease Inhibitory Activities JF - Marine drugs N2 - Four new tetromycin derivatives, tetromycins 1-4 and a previously known one, tetromycin B (5) were isolated from Streptomyces axinellae Pol001(T) cultivated from the Mediterranean sponge Axinella polypoides. Structures were assigned using extensive 1D and 2D NMR spectroscopy as well as HRESIMS analysis. The compounds were tested for antiparasitic activities against Leishmania major and Trypanosoma brucei, and for protease inhibition against several cysteine proteases such as falcipain, rhodesain, cathepsin L, cathepsin B, and viral proteases SARS-CoV M(pro), and PL(pro). The compounds showed antiparasitic activities against T. brucei and time-dependent inhibition of cathepsin L-like proteases with K(i) values in the low micromolar range. KW - cysteine protease KW - drugs KW - streptomyces KW - discovery KW - anti-trypanosomal KW - protease inhibition KW - Streptomyces axinellae KW - marine sponge KW - tetromycin Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-141171 VL - 9 IS - 10 ER - TY - INPR A1 - Höbartner, Claudia A1 - Steinmetzger, Christian A1 - Palanisamy, Navaneethan A1 - Gore, Kiran R. T1 - A multicolor large Stokes shift fluorogen-activating RNA aptamer with cationic chromophores T2 - Chemistry - A European Journal N2 - Large Stokes shift (LSS) fluorescent proteins (FPs) exploit excited state proton transfer pathways to enable fluorescence emission from the phenolate intermediate of their internal 4 hydroxybenzylidene imidazolone (HBI) chromophore. An RNA aptamer named Chili mimics LSS FPs by inducing highly Stokes-shifted emission from several new green and red HBI analogs that are non-fluorescent when free in solution. The ligands are bound by the RNA in their protonated phenol form and feature a cationic aromatic side chain for increased RNA affinity and reduced magnesium dependence. In combination with oxidative functional-ization at the C2 position of the imidazolone, this strategy yielded DMHBO\(^+\), which binds to the Chili aptamer with a low-nanomolar K\(_D\). Because of its highly red-shifted fluorescence emission at 592 nm, the Chili–DMHBO\(^+\) complex is an ideal fluorescence donor for Förster resonance energy transfer (FRET) to the rhodamine dye Atto 590 and will therefore find applications in FRET-based analytical RNA systems. KW - RNA Aptamer KW - fluorescence KW - large Stokes shift KW - fluorescent protein KW - fluorescent resonance energy transfer Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174197 N1 - This is the pre-peer reviewed version of the following article: Steinmetzger, C. , Palanisamy, N. , Gore, K. . and Höbartner, C. (2018), A multicolor large Stokes shift fluorogen‐activating RNA aptamer with cationic chromophores. Chem. Eur. J. doi:10.1002/chem.201805882, which has been published in final form at https://doi.org/10.1002/chem.201805882. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. ER - TY - THES A1 - Schreck, Maximilian T1 - Synthesis and Photophysics of Linear and Star-Shaped Oligomers of Squaraine Dyes T1 - Synthese und Photophysik von Linearen und Sternförmigen Squarain-Oligomeren N2 - In this thesis, the synthesis and photophysics of a great variety of squaraine dyes are presented. This variety is based on four parent squaraines containing either indolenine or quinoline heterocycles. By a suitable choice of the donor and acceptor unit, the optical properties can already be adapted to the properties desired on the stage of the monomer. To promote a further derivatisation of these dyes, diverse functional groups are attached to the monomers using transition metal-catalysed C-C coupling reactions. However, this has to be preceded by the synthesis of bromine-functionalised derivatives as a direct halogenation of squaraine dyes is not feasible. Therefore, the halogen function is already introduced in precursor molecules giving rise to a molecular building block system containing bromine-, boronic ester-, and alkyne-functionalised monomer units, which pave the way to a plethora of squaraine oligomers and polymers. The indolenine homopolymer pSQB-1 as well as the corresponding small molecular weight oligomers dSQB-1 and tSQB were synthesized applying Ni-mediated Yamamoto and Pd-catalysed Suzuki coupling methodologies, respectively. The motivation for this project relied on the fundamental investigations by Völker et al. on pSQB-V. A progressive red-shift of the lowest energy absorption maximum from the dimer to the polymer was observed in CHCl3 compared to the monomer. With increasing number of monomer units, the exciton coupling decreases from the dimer to the polymer. In addition, the shape of the absorption band manifold shows a strong dependence on the solvent, which was also observed by Völker et al. J-type aggregate behavior is found in chlorinated solvents such as CHCl3 and DCM, whereas H-type aggregates are formed in acetone. Temperature-dependent absorption studies in PhCN reveals a reversible equilibrium of diverse polymer conformers, which manifests itself in a gradual change from H-aggregate behavior to a mixture with a more pronounced J-aggregate behavior upon raising the temperature. It isassumed that both characteristic aggregate bands correlate in borderline cases with two polymer structures which can be assigned to a zig-zag and a helical structure. As no experimental evidence for these structures could hitherto be provided by NMR, TD-DFT computations on oligomers (22-mers) can reproduce very closely the characteristic features of the spectra for the two conformational isomers. The subsequent chapters are motivated by the goal to influence the optical properties through a control of the superstructure and thus of the intramolecular aggregate formation. On the one hand, bulky groups are implemented in the 3-position of the indolenine scaffold to provoke steric repulsion and thus favoring J-aggregate behavior at the expense of helical arrangements. The resulting homopolymer pDiPhSQB bearing two phenyl groups per indolenine exhibits J-type aggregate behavior with red-shifted absorption maxima in all considered solvents which is explained to be caused by the formation of elongated zig-zag structures. Furthermore, single-crystal X-ray analysis of monomer DiPhSQB-2-Br2 reveals a torsion of the indolenine moieties as a consequence of steric congestion. The twist of the molecular geometry and the resulting loss of planarity leads to a serious deterioration of the fluorescence properties, however a significant bathochromic shift of ca. 1 200 cm-1 of the lowest absorption band was observed compared to parent SQB, which is even larger than the shift for dSQB-1 (ca. 1 000 cm-1). On the other hand, a partial stiffening of the polymer backbone is attempted to create a bias for elongated polymer chains. In this respect, the synthetic approach is to replace every second biarylaxis with the rigid transoid benzodipyrrolenine unit. Despite a rather low average degree of polymerization < 10, exclusively red-shifted absorption maxima are observed in all solvents used. In order to complete the picture of intramolecular aggregates through the selective design of H-aggregates, a squaraine-squaraine copolymer was synthesised containing the classic cisoid indolenine as well as the cisoid quinoline building block. Taking advantage of the highly structure directing self-assembly character of the quinoline moiety, the copolymer pSQBC indeed showes a broad, blue-shifted main absorption band in comparison with the monomer unit dSQBC. The shape of the absorption band manifold solely exhibited a minor solvent and temperature dependence indicating a persistent H-aggregate behaviour. Hence, as a proof of concept, it is shown that the optical properties of the polymers (H- and J-aggregate) and the corresponding superstructure can be inherently controlled by an adequate design of monomer precursors. The last chapter of this work deals, in contrast to all other chapters, with intermolecular aggregates. It is shown that the two star-shaped hexasquarainyl benzenes hSQA-1 and hSQA-2 exhibit a strong propensity for self-organisation. Concentration- and temperature-dependent studies reveal a great driving force for self-assembly in acetone. While the larger hSQA-2 instantaneously forms stable aggregates, the aggregates of hSQA-1 shows a pronounced kinetic stability. Taking advantage of the kinetic persistency of these aggregates, the corresponding kinetic activation parameters for aggregation and deaggregation can be assessed. The absorption spectra of both hexasquarainyl benzenes in the aggregated state reveal some striking differences. While hSQA-1 features an intensive, very narrow and blue-shifted absorption band, two red-shifted bands are observed for hSQA-2, which are closely located at the monomer absorption. The very small bandwidth of hSQA-1 are interpreted to be caused by exchange narrowing and pointed towards highly ordered supramolecular aggregates. The concentration-dependent data of the two hexasquarainyl benzenes can be fitted to the dimer-model with excellent correlation coefficients, yielding binding constants in excess of 10^6 M-1, respectively. Such high binding constants are very surprising, considering the unfavourable bulky 3,3-dimethyl groups of the indolenine units which should rather prevent aggregation. Joint theoretical and NMR spectroscopic methods were applied to unravel the supramolecular aggregate structure of hSQA-1, which is shown to consist of two stacked hexasquarainyl benzenes resembling the picture of two stacked bowls. N2 - Im Rahmen dieser Arbeit wird die Synthese sowie photophysikalischen Untersuchungen einer Vielzahl von Squarainfarbstoffen präsentiert. Diese Vielfalt erwuchs aus vier monomeren Stammverbindungen, die auf Indolenin- bzw. Chinolin-Heterozyklen gründeten. Um die Derivatisierung der Monomere weiter voranzutreiben, werden diese durch geeignete funktionelle Gruppen unter der Verwendung von übergangsmetallkatalysierten C-C Kupplungsreaktionen chemisch modifiziert. Dieser geht jedoch die Synthese Brom-funktionalisierter Vorstufen voraus. So muss die Halogenfunktion bereits in den Vorläufermolekülen eingeführt werden, da eine selektive, direkte Halogenierung auf der Stufe des Squarains nicht möglich ist. Schlussendlich kann somit ein molekularer Baukasten entwickelt werden, der, bestückt mit Monomerbausteinen mit Brom-, Borester-, und Alkinfunktionen, den Weg zu diversen oligomeren und polymeren Squarainfarbstoffen ebnete. Das Indolenin Squarain Homopolymer pSQB-1, als auch die entsprechenden niedermolekularen Oligomerverbindungen dSQB-1 und tSQB wurden mittels der Ni-unterstützten Yamamoto bzw. Pd-katalysierte Suzuki Kupplung dargestellt. Die bereits durch Völker et al. erfolgten spektroskopischen Untersuchungen an pSQB-V werden im Rahmen dieser Arbeit fortgesetzt. Im Vergleich zum Monomer, zeigen das Dimer, Trimer und das Polymer in CHCl3 eine progressive Rotverschiebung der niedrigsten, intensivsten Absorptionsbande. Mit steigender Anzahl der SQB-Monomereinheiten nimmt die Exzitonenkopplung im Dimer bis hin zum Polymer ab. Wie auch bereits Völker et al. zeigen konnten, ist die Form der Absorption des Exzitonenbandes von pSQB-1 stark lösemittelabhängig. Während J-Aggregat ähnliches Verhalten in CHCl3 und DCM beobachtet wird, zeigt das Polymer in Aceton H-Aggregat ähnliches Verhalten. Temperaturabhängige Absorptionsmessungen in PhCN zeigen ein reversibles thermodynamisches Gleichgewicht von verschiedenen Polymerstrukturen, welches sich mit steigender Temperatur durch einen sukzessiven Übergang von H-Aggregat zu einer Mischung mit mehr J-Aggregat Charakter manifestiert. Es wird angenommen, dass das Auftreten der charakteristischen Aggregatsbanden im Grenzfall mit zwei Polymerkonformeren korreliert, die einer Zick-Zack- und einer Helix-Struktur entsprechen. Da hierfür keine experimentellen Beweise durch NMR bis dato vorliegen, wurden TD-DFT Kalkulationen an Oligomereinheiten (22-er) durchgeführt, die die wesentlichen Merkmale der Absorptionsspektren der zwei Konformere reproduzieren konnten. Die anschließenden Kapitel erwuchsen aus der Motivation heraus, die optischen Eigenschaften der Polymere über die Kontrolle der Strukturbildung und somit der intramolekularen Aggregatsbildung zu beeinflussen. Um einerseits J-Aggregat Verhalten zu provozieren wird zunächst der Ansatz verfolgt, durch sterisch anspruchsvolle Gruppen in der 3-Position des Indolenin Gerüsts, den Kollaps zu helikalen Stukturen zu vermeiden. Das resultierende Homopolymer pDiPhSQB mit zwei Phenylgruppen pro Indolenin Einheit zeigt in allen untersuchten Lösemitteln bathochrom verschobene Absorptionsmaxima, was mit der Ausbildung von ausschließlich ausgedehnten Zick-Zack-Ketten begründet werden. Darüber hinaus zeigte die Einkristall-Röntgenstrukturanalyse des Monomers DiPhSQB-2-Br2 als Konsequenz der sterischen Überfrachtung eine Torsion des Indolenin Gerüsts. Die Verdrillung der Molekülgeometrie und der daraus resultierende Verlust an Planarität, führt zu einer erheblichen Verschlechterung der Fluoreszenzeigenschaften, jedoch wird eine signifikante Rotverschiebung der Monomerbande von ca. 1 200 cm-1 im Vergleich zu SQB beobachtet, welche sogar größer als die für dSQB-1 ist. Zum anderen ergibt der Ansatz der partiellen Versteifung des Polymerrückgrades ebenfalls die Ausbildung von ausgedehnten Polymerketten begünstigen. Dieser Ansatz wird insofern verfolgt, als dass jede zweite Biarylachse zwischen zwei Monomereinheiten in pSQB-1 durch eine rigide transoide Benzodipyrrolenin Brücke ersetzt wird. Trotz eines eher geringen durchschnittlichen Polymerisationsgrades von < 10 kann dennoch eine Rotverschiebung der niederenergetischsten Absorptionsbande in allen Lösemitteln beobachtet werden. Um das Bild der intramolekularen Aggregate zu vervollständigen, wird das gezielte Design von H-Aggregaten verfolgt. Hierfür wurde ein Squarain-Squarain Copolymer synthetisiert, das zum einen aus dem klassischen cisoiden Indolenin und zum anderen aus dem cisoiden Chinolin Squarain aufgebaut ist. Diesbezüglich will man sich die Triebkraft des Chinolin Bausteins für Aggregation als strukturdirigierende Komponente zu Nutze machen, um helikale Konformationen der Polymerstränge zu erzeugen. Das Copolymer pSQBC zeigt in der Tat eine verbreiterte, hypsochrom verschobene Hauptabsorptionsbande im Vergleich zur Monomereinheit dSQBC. Die Form der Absorption des Exzitonenbandes zeigt eine geringe Lösemittelabhängigkeit, die ebenfalls nur marginal durch die Temperatur beeinflusst werden kann. Schlussendlich deuten diese Befunde auf ein stark-ausgeprägtes H-Aggregat ähnliches Verhalten hin, was die zu anfangs formulierte These belegt, dass sich die optischen Eigenschaften der Polymere (H- und J-Aggregate) und deren Strukturbildung durch ein adäquates Moleküldesign der Monomerbausteine kontrollieren lassen. Das letzte Kapitel dieser Arbeit stand im Gegensatz zu den vorherigen Kapiteln ausschließlich im Fokus von intermolekularen Aggregaten. Die Squaraine hSQA-1 und hSQA-2 neigen, in ein sternförmiges Hexaarylbenzol-Gerüst gebettet, zur Selbstorganisation. Konzentration- und temperaturabhängige Studien der beiden synthetisierten Hexasquarainyl-Benzole zeigen eine starke Triebkraft zur Aggregation in Aceton. Während hSQA-2 instantan thermodynamisch stabile Aggregate bildet, offenbart hSQA-1 Aggregate eine ausgeprägte kinetische Stabilität. Dies kann man sich zu Nutze machen und die kinetischen Aktivierungsparameter der Aggregation und Deaggregation zu bestimmen. Die Absorptionsspektren der beiden Hexasquarainyl-Benzole im aggregierten Zustand zeigen extreme Unterschiede auf. Während hSQA-1 eine intensive, sehr schmale und stark hypsochrom verschobene Bande zeigt, beobachtet man für das größere Hexasquarainyl-Benzol zwei bathochrom verschobene Banden, die allerdings energetisch sehr nahe der Monomerbande lokalisiert sind. Die sehr geringe Halbwertsbreite der Aggregatsbande in hSQA-1 wird durch die sog. Austauschverschmälerung erklärt und deutet auf hochgeordnete supramolekulare Aggregate hin. Die konzentrationsabhängigen Messdaten der beiden Chromophore konnten sehr gut mit Hilfe des Dimer-Modells angepasst werden, welches für beide Systeme eine hohe Bindungskonstante von über 10^6 M-1 ergab. In Anbetracht der Tatsache, dass die raumgreifenden 3,3-Dimethylgruppen im Indoleningerüst extrem hinderlich für den Aggregationsprozess sind, ist die starke Triebkraft zur Selbstorganisation, welche sich in den hohen Bindungskonstanten niederschlägt, äußerst bemerkenswert. Theoretische Modellierungen und Rechnungen in Kombination mit NMR-spektroskopischen Untersuchungen von hSQA-1 ergeben eine Aggregatsstruktur aus zwei sich stapelten Hexasquarainylbenzolmonomeren, die dem Bild zweier gestapelter Schüsseln entspricht. KW - Squaraine KW - Oligomere KW - Supramolekulare Chemie KW - Squaraine Dyes KW - Oligomers and Polymers KW - J- and H-Aggregates KW - Helix- and Zig-Zag-Conformers KW - Supramolecular Chemistry KW - Squarain Farbstoffe KW - J- and H-Aggregate KW - Helix- and Zick-Zack-Konformere KW - Supramolekulare Chemie KW - Helicität KW - Chemische Synthese KW - Chemische Reaktion Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174272 ER - TY - THES A1 - Seifert, Sabine T1 - New Electron-Deficient Polycyclic Aromatic Dicarboximides by Palladium-Catalyzed C–C Coupling and Core Halogenation–Cyanation T1 - Neue elektronenarme polyzyklische aromatische Dicarboximide durch Palladium-katalysierte C–C-Kupplung und Kernhalogenierung–Cyanierung N2 - The thesis describes the development of new synthetic strategies towards planar nanometer-sized and electron-deficient polycyclic aromatic dicarboximides, which are rather unexplored compared with the large variety of electron-rich polycyclic aromatic hydrocarbons and nanographenes. Thus, new polycyclic aromatic systems containing a different number of dicarboximide groups were designed since this class of compounds has revealed its significance in the past due to a range of desirable molecular properties and its high thermal and photochemical stability. The synthetic concept towards these systems includes different C–C coupling techniques that were combined within coupling cascade reactions. Therefore, this thesis provides new insights into the reactivity of aromatic substrates and elucidates mechanistic aspects of C–C coupling cascade reactions to facilitate the precise design of new and desirable materials based on polycyclic aromatic dicarboximides. Furthermore, structure-property relationships as well as the optical and electrochemical properties were investigated by UV/Vis absorption and fluorescence spectroscopy and cyclic or square wave voltammetry. Insights into the molecular structures in the solid state were obtained by single-crystal X-ray analysis. In subsequent studies, highly electron-deficient perylene bisimides and their reduced species have been investigated in detail. Thus, core-functionalized perylene bisimides were synthesized and UV/Vis absorption spectroscopy, spectroelectrochemistry and cyclic or square wave voltammetry were used to determine their optical properties and the stability of the individual reduced species. N2 - Die vorliegende Arbeit beschreibt die Entwicklung neuer Synthesestrategien für planare und elektronenarme polyzyklische aromatische Dicarboximide in der Größenskala weniger Nanometer, welche im Vergleich zu der Vielzahl an elektronenreichen polyzyklischen aromatischen Kohlenwasserstoffen und Nanographenen weitaus weniger erforscht sind. Daher wurden neue polyzyklische aromatische Systeme entworfen, welche eine unterschiedliche Anzahl von Dicarboximid-Einheiten enthalten, da diese Klasse von Verbindungen ihre Bedeutsamkeit in der Vergangenheit aufgrund einer Reihe vorteilhafter molekularer Eigenschaften und ihrer hohen thermischen und photochemischen Stabilität gezeigt hat. Das synthetische Konzept für diese Systeme umfasst dabei verschiedene C–C-Knüpfungstechniken, die zu Kaskadenreaktionen kombiniert wurden. Daher werden in dieser Arbeit neue Einblicke in die Reaktivität von aromatischen Substraten aufgezeigt und mechanistische Aspekte von C–C-Kupplungskaskadenreaktionen erläutert, um eine präzise Gestaltung neuer und erstrebenswerter Materialien auf der Basis von polyzyklischen aromatischen Dicarboximiden zu erleichtern. Darüber hinaus wurden Struktur-Eigenschafts-Beziehungen sowie die optischen und elektrochemischen Eigenschaften durch UV/Vis-Absorptions- und Fluoreszenzspektroskopie sowie Cyclo- oder Square Wave Voltammetrie untersucht. Einblicke in die molekularen Strukturen im Festkörper wurden durch Einkristallstrukturanalyse erhalten. In nachfolgenden Studien wurden stark elektronenarme Perylenbisimide und ihre reduzierten Spezies detailliert untersucht. Dazu wurden kernfunktionalisierte Perylenbisimide synthetisiert. Um deren optische Eigenschaften und die Stabilität der reduzierten Spezies zu bestimmen wurden UV/Vis-Absorptionsspektroskopie, Spektroelektrochemie und Cyclo- oder Square Wave Voltammetrie verwendet. KW - Kupplungsreaktion KW - Dicarboximide KW - Polycyclische Aromaten KW - C-C coupling KW - Dicarboximides KW - Polycyclic aromatic hydrocarbons Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-156200 ER - TY - JOUR A1 - He, Tao A1 - Stolte, Matthias A1 - Burschka, Christian A1 - Hansen, Nis Hauke A1 - Musiol, Thomas A1 - Kälblein, Daniel A1 - Pflaum, Jens A1 - Tao, Xutang A1 - Brill, Jochen A1 - Würthner, Frank T1 - Single-crystal field-effect transistors of new Cl\(_{2}\)-NDI polymorph processed by sublimation in air JF - Nature Communications N2 - Physical properties of active materials built up from small molecules are dictated by their molecular packing in the solid state. Here we demonstrate for the first time the growth of n-channel single-crystal field-effect transistors and organic thin-film transistors by sublimation of 2,6-dichloro-naphthalene diimide in air. Under these conditions, a new polymorph with two-dimensional brick-wall packing mode (\(\beta\)-phase) is obtained that is distinguished from the previously reported herringbone packing motif obtained from solution (\(\alpha\)-phase). We are able to fabricate single-crystal field-effect transistors with electron mobilities in air of up to 8.6 cm\(^{2}\)V\(^{-1}\)s\(^{-1}\) (\(\alpha\)-phase) and up to 3.5 cm\(^{2}\)V\(^{-1}\)s\(^{-1}\) (\(\beta\)-phase) on n-octadecyltriethoxysilane-modified substrates. On silicon dioxide, thin-film devices based on \(\beta\)-phase can be manufactured in air giving rise to electron mobilities of 0.37 cm\(^{2}\)V\(^{-1}\)s\(^{-1}\). The simple crystal and thin-film growth procedures by sublimation under ambient conditions avoid elaborate substrate modifications and costly vacuum equipment-based fabrication steps. KW - thin-film transistors KW - carrier transport KW - \(\beta\)-phase KW - organic semiconductors KW - induced phase transition KW - charge transport KW - materials design KW - \(\alpha\)-phase KW - mobility KW - pentacene Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149255 VL - 6 IS - 5954 ER - TY - JOUR A1 - Görl, Daniel A1 - Zhang, Xin A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Supramolecular block copolymers by kinetically controlled co-self-assembly of planar and core-twisted perylene bisimides JF - Nature Communications N2 - New synthetic methodologies for the formation of block copolymers have revolutionized polymer science within the last two decades. However, the formation of supramolecular block copolymers composed of alternating sequences of larger block segments has not been realized yet. Here we show by transmission electron microscopy (TEM), 2D NMR and optical spectroscopy that two different perylene bisimide dyes bearing either a flat (A) or a twisted (B) core self-assemble in water into supramolecular block copolymers with an alternating sequence of (A\(_{m}\)BB)\(_{n}\). The highly defined ultralong nanowire structure of these supramolecular copolymers is entirely different from those formed upon self-assembly of the individual counterparts, that is, stiff nanorods (A) and irregular nanoworms (B), respectively. Our studies further reveal that the as-formed supramolecular block copolymer constitutes a kinetic self-assembly product that transforms into thermodynamically more stable self-sorted homopolymers upon heating. KW - cylindrical micelles KW - water KW - amplification KW - association KW - emission KW - organization KW - polymerization KW - dyes KW - fluorescent KW - aqueous medium Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148657 VL - 6 IS - 7009 ER - TY - INPR A1 - Sednev, Maksim V. A1 - Mykhailiuk, Volodymyr A1 - Choudhury, Priyanka A1 - Halang, Julia A1 - Sloan, Katherine E. A1 - Bohnsack, Markus T. A1 - Höbartner, Claudia T1 - N\(^6\)-methyladenosine-sensitive RNA-cleaving deoxyribozymes T2 - Angewandte Chemie, International Edition N2 - Deoxyribozymes are synthetic enzymes made of DNA that can catalyze the cleavage or formation of phosphodiester bonds and are useful tools for RNA biochemistry. Here we report new RNA-cleaving deoxyribozymes to interrogate the methylation status of target RNAs, thereby providing an alternative method for the biochemical validation of RNA methylation sites containing N\(^6\)-methyladenosine, which is the most wide-spread and extensively investigated natural RNA modification. Using in vitro selection from random DNA, we developed deoxyribozymes that are sensitive to the presence of N\(^6\)-methyladenosine in RNA near the cleavage site. One class of these DNA enzymes shows faster cleavage of methylated RNA, while others are strongly inhibited by the modified nucleotide. The general applicability of the new deoxyribozymes is demonstrated for several examples of natural RNA sequences, including a lncRNA and a set of C/D box snoRNAs, which have been suggested to contain m\(^6\)A as a regulatory element that influences RNA folding and protein binding. KW - N6-methyladenosine KW - RNA modification KW - deoxyribozymes KW - in vitro selection KW - DNA catalyst Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-171753 N1 - This is the pre-peer reviewed version of the following article: M.V. Sednev, V. Mykhailiuk, P. Choudhury, J. Halang, K. E. Sloan, M. T. Bohnsack, C. Höbartner, Angew. Chem. Int. Ed. 2018, 57, 15117-15121, which has been published in final form at https://doi.org/10.1002/anie.201808745. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. ER - TY - THES A1 - Schäfer, Julian T1 - Synthesis and Photophysical Investigation of Donor-Acceptor-Substituted meta- and para-Benzene Derivatives T1 - Synthese und Photophysikalische Untersuchung Donor-Akzeptor-Substituierter meta- und para-Benzolderivate N2 - Im ersten Teil dieser Arbeit wurde die erfolgreiche Synthese einer Serie von bisTriarylamin (bisTAA) Verbindungen vorgestellt. Zum einen wurde das Substitutionmuster an der Benzol Brückeneinheit in Form einer meta- bzw. para-Ständigkeit der Redoxzentren (pX bzw. mX), und zum anderen die energetische Lage der Brückeneinheit durch zwei elektronen-schiebende oder ziehende Substituenten X (mit X = OMe, Me, Cl, CN, NO2) in 2,5-Position variiert. Im Falle der meta-Serie wurden auch einige in 4,6-Position substituierte Verbinungen hergestellt (mX46). Die neutral Verbindungen wurden bezüglich ihrer elektrochemischen und photophysikalischen Eigenschaften untersucht. Durch Oxidation konnten die gemischt valenten (MV), kationischen bisTAA-Verbindungen erzeugt werden. Der thermisch induzierte Lochtransfer (HT) wurde durch temperatur-abhängige ESR-Spektroskopie untersucht. Während die HT-Rate k und HT-Barriere ΔG in mX unbeeinflusst von den Substituenten X sind, steigen gleichzeitig k und ΔG in der pX-Serie mit zunehmenden Elektonenschub von X an. Diese zunächst widersprüchliche Beobachtung konnte durch einen ansteigenden Einfluss von Lösungsmitteleffekten und dadurch resultierend, einer zusätzlichen effektiven Barriere erklärt werden. Der optisch induzierte Lochtransfer wurde mittels UV/Vis/NIR-Spektroskopie untersucht. Die pX-Serie zeigte eine Zuhname der elektronischen Kopplung V und dementsprechende eine Abnahme von ΔG, mit Anstieg des elektonenschiebenden Charakters von X. Für mX war eine spektroskopische Bestimmung dieser Parameter nicht möglich. Die mX46-Serie zeigte ein intermediäres Verhalten, wobei MV-Verbindungen mit stark elektronenschiebenden X eine ähnliche hohe Kopplungen wie pX aufwiesen, was mit Hilfe von DFT-Rechnungen bezüglich der Molekülorbitale erklärt werden konnte. Im zweiten Teil dieser Arbeit wurde die Synthese einer Serie von Verbindungen mit Triarylamin (TAA) als Donor und Naphthalindiimid (NDI) als Akzeptor vorgestellt. Auch hier wurde zum einen das Substitutionmuster an der Benzol-Brückeneinheit in Form einer meta- bzw. para-Ständigkeit der Redoxzentren (pXNDI bzw. mXNDI) variieiet und die energetische Lage der durch X (mit X = OMe, Me, Cl, CN, NO2) in 2,5-Position variiert. Außerdem wurde die in 4,6-Position substituierte Verbinungen mOMe46NDI hergestellt. Alle Verbindungen wurden bezüglich ihrer elektochemischen und photophysikalischen Eigenschaften untersucht. Die Elektronentransferprozesse der Ladungsseparierung (CS) und Ladungsrekombination (CR) dieser Verbindungen sollten mittels transienter Absorptionsspektroskopie (TA) in Toluol untersucht werden. Für die Nitroverbindungen p-/mNO2NDI war dies nicht möglich, da sich diese unter Bestrahung zersetzten. Die CR von pXNDI waren nicht im ns-Bereich detektierbar, weshalb sich auf die mXNDI-Serie (mit X = OMe–CN) konzentriert wurde. Die CS wurde mittels fs-TA untersucht. Nach optischer Anregung konnte die Bildung eines CS-Zustandes detektiert werden, dessen Bildungsgeschwindigkeit hin zu elektronen-ziehenden Substituenten X steigt. Die CR wurde mit ns-TA untersucht. Sie findet in der Marcus invertierten Region statt und zeichnet sich wird durch ein biexponentialles Abklingverhaten, was durch ein Singulet-Triplett Gleichgewicht im CS-Zustand zustande kommt, aus. Durch Anlegen eines externen Magnetfeldes ließ sich das Abklingverhalten entscheidend verändern und es konnte eine Singulett-Triplett Aufspaltung nachgewiesen werden. Dieser Befund konnte weiterhin durch Simulation der Abklingkurven bestätigt werden. In beiden Teilen dieser Arbeit konnte ein entscheidender Einfluss der Benzolbrücke auf die auftretenden Ladungstransferprozesse gezeigt werden. Für den HT in Grundzustand der MV bisTAA Verbindungen, sowie der ET im angeregten Zustand der Donor-Akzeptor-Verbindungen, wurden die höchsten ET-Raten für die para-Serien pX und pXNDI gefunden, während die meta-Serien mX und mXNDI deutlch kleine Transferraten aufwiesen. In beiden Studien zeigten die meta46-Verbindungen mX46 und mOMeNDI46 ein intermediäres Verhalten, zwischen denen der para- und meta-Verbindungen. N2 - In the first part of this thesis, the synthesis of a series of bistriarylamine (bisTAA) compounds was presented. On the one hand, the substitution pattern of the TAA at the benzene bridging unit was varied from meta- to para-position (pX and mX), on the other hand, the energetic position of the bridging unit was tuned by use of two electron-donating or electron-accepting substituents X (with X = OMe, Me, Cl, CN, NO2) in 2,5-position. In case of the meta-series, compounds with X in 4,6-position were synthesized (mX46). The photophysical and electrochemical properties of the neutral compounds were investigated. The cationic mixed valence (MV) bisTAA compounds could be generated by oxidation. Thermally induced hole transfer (HT) in the groud state was investigated by temperature depending ESR spectroscopy. While the HT rate k and HT barrier ΔG in mX are unaffected by the substituents X, k and ΔG in the pX series increase simultaneously with increasing electron-donating strength of X. This, at first contradictory observation can be explained by an increasingly important solvent dynamic effect and an additional, effective barrier. The optically induced HT was examined by UV/Vis/NIR spectroscopy. The pX-series revealed an increase of the electronic coupling V, and correspondingly a decrease of ΔG, with an increase of the electron donating character of X. For mX, a spectroscopic determination of these parameters was not possible. mX46 showed an intermediate behavior, MV compounds with strong electron-donating X, obtained coupling of similar magnitude as pX, which could be explained by means of DFT calculations, with regard to the molecular orbitals. In the second part of this work, the synthesis of a series of dyads with triarylamine (TAA) as a donor and naphthalene diimide (NDI) as an acceptor was presented. Again, the substitution pattern of the redox centers at the benzene bridging unit was varied in the form of a meta- or para-position (pXNDI or mXNDI) and the energetic position of the bridging unit was varied by X (with X = OMe, Me, Cl, CN, NO2) attached in the 2,5-position. Additionally, compound mOMe46NDI with methoxy substitution in 4,6-position was synthesized. The photophysical and electrochemical properties of these compounds were investigated. The electron transfer (ET) processes of charge separation (CS) and charge recombination (CR) of these were investigated by means of transient absorption (TA) spectroscopy in toluene. This was not possible for the nitro-compounds p-/mNO2NDI, since they decomposed under irradiation. In addition to that, the CR of pXNDI was not detectable by ns-setup, which is why the focus was given to the mXNDI series (with X = OMe–CN).The CS was examined by fs-TA spectroscopy, where the formation of a CS state could be detected. The rise time of the CS states decreases with increasing electron-withdrawing substituents X. CR was examined with ns-TA spectroscopy and shows a biexponential decay behavior, which is caused by singlet-triplet equilibrium in the CS state. By applying an external magnetic field, the decay behavior was decisively changed and the singlet-triplet splitting could be determined. This finding could also be confirmed by simulating the decay curves. In both parts of this work, the decisive influence of the benzene bridging unit on the appearing ET processes became obvious. For the HT in the ground state of the MV compound, as well as for the ET in the exited states of the DA compounds, the highest transfer rates were found for the para-series pX and pXNDI, and much smaller rates for the meta-series mX and mXNDI. The meta46-compounds mX46 and mOMeNDI46 showed an intermediate behavior in both parts of this work. KW - Synthese KW - Elektronentransfer KW - UV-VIS-Spektroskopie KW - Magnetfeldeffekt KW - intervalence charge transfer KW - transient absorption spectroscopy Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-155007 ER - TY - JOUR A1 - Sung, Jooyoung A1 - Kim, Pyosang A1 - Fimmel, Benjamin A1 - Würthner, Frank A1 - Kim, Dongho T1 - Direct observation of ultrafast coherent exciton dynamics in helical π-stacks of self-assembled perylene bisimides JF - Nature Communications N2 - Ever since the discovery of dye self-assemblies in nature, there have been tremendous efforts to exploit biomimetic supramolecular assemblies for tailored artificial photon processing materials. This feature necessarily has resulted in an increasing demand for understanding exciton dynamics in the dye self-assemblies. In a sharp contrast with pi-type aggregates, however, the detailed observation of exciton dynamics in H-type aggregates has remained challenging. In this study, as we succeed in measuring transient fluorescence from Frenkel state of π-stacked perylene tetracarboxylic acid bisimide dimer and oligomer aggregates, we present an experimental demonstration on Frenkel exciton dynamics of archetypal columnar π-π stacks of dyes. The analysis of the vibronic peak ratio of the transient fluorescence spectra reveals that unlike the simple π-stacked dimer, the photoexcitation energy in the columnar π-stacked oligomer aggregates is initially delocalized over at least three molecular units and moves coherently along the chain in tens of femtoseconds, preceding excimer formation process. KW - systems KW - molecules KW - J-aggregate behavior KW - absorption KW - spectroscopy KW - photoluminescence KW - diffusion KW - fluorescence KW - excimer formation KW - organic semiconductors Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148157 VL - 6 IS - 8646 ER - TY - THES A1 - Kunz, Valentin T1 - Supramolecular Approaches for Water Oxidation Catalysis with Ruthenium Complexes T1 - Supramolekulare Ansätze für die Wasseroxidationskatalyse mit Rutheniumkomplexen N2 - The catalytic splitting of water into its elements is an important reaction to establish hydrogen as a solar fuel. The bottle-neck of this process is considered to be the oxidative half reaction generating oxygen, and good catalysts are required to handle the complicated redox chemistry involved. As can be learned from nature, the incorporation of the catalytically active species into an appropriate matrix can help to improve the overall performance. Thus, the aim of the present thesis was to establish novel supramolecular approaches to improve water oxidation catalysis using the catalytically active {Ru(bda)} fragment as key motive (bda = 2,2'-bipyridine-6,6'-dicarboxylate). First, the synthesis of ruthenium catalysts gathering three {Ru(bda)} water oxidation subunits in a macrocyclic fashion is described. By using bridging bipyridine ligands of different lengths, metallosupramolecular macrocycles with distinct sizes have been obtained. Interestingly, an intermediate ring size has been proven to be optimal for the catalytic water oxidation. Detailed kinetic, spectroscopic, and theoretical studies helped to identify the reaction mechanism and to rationalize the different catalytic activities. Furthermore, solubilizing side chains have been introduced for the most active derivative to achieve full water solubility. Secondly, the {Ru(bda)} fragment was embedded into supramolecular aggregates to generate more stable catalytic systems compared to a homogeneous reference complex. Therefore, the catalyst fragment was equipped with axial perylene bisimide (PBI) ligands, which facilitate self-assembly. Moreover, the influence of the different accessible aggregate morphologies on the catalytic performance has been investigated. N2 - Die katalytische Spaltung von Wasser in seine Elemente ist eine wichtige Reaktion für die Erzeugung von Wasserstoff als alternativem Brennstoff. Die Sauerstoff-erzeugende Halbreaktion gilt gemeinhin als Flaschenhals dieses Prozesses, weshalb effiziente Katalysatoren benötigt werden um die komplizierte Redoxchemie zu bewältigen. Die Natur als Vorbild lehrt uns, dass die Einbettung katalytisch aktiver Zentren in eine unterstützende Matrix dazu beitragen kann deren Leistung erheblich zu steigern. Ziel der vorliegenden Dissertation war daher die Etablierung neuartiger supramolekularer Ansätze zur Verbesserung der Wasseroxidationskatalyse. Als Katalysator-Leitmotiv diente das {Ru(bda)}-Fragment (bda = 2,2'-Bipyridin-6,6'-dicarboxylat). Zunächst wird die Synthese von Rutheniumkatalysatoren beschrieben, in denen drei {Ru(bda)}-Zentren in makrozyklischer Weise verknüpft sind. Durch die Verwendung von verbrückenden Bipyridin-Liganden unterschiedlicher Länge wurden metallosupramolekulare Makrozyklen mit verschiedenen Ringgrößen erhalten. Interessanterweise erwies sich eine mittlere Größe als optimal für die katalytische Wasseroxidation. Detaillierte kinetische, spektroskopische und theoretische Untersuchungen haben dazu beigetragen, den Reaktionsmechanismus zu identifizieren und die verschiedenen katalytischen Aktivitäten zu erklären. Darüber hinaus wurden löslichkeitsfördernde Seitenketten für den aktivsten Makrozyklus eingeführt, um eine vollständige Wasserlöslichkeit zu erreichen. Darüber hinaus wurde das {Ru(bda)}-Fragment in supramolekulare Aggregate eingebettet, um im Vergleich zu einem homogenen Referenzkomplex stabilere katalytische Systeme zu erzeugen. Dafür wurde das Katalysatorfragment mit axialen Perylenbisimid-Liganden ausgestattet, welche zur Selbstassemblierung neigen. In diesem Zusammenhang wurde der Einfluss der verschiedenen zugänglichen Aggregatmorphologien auf die katalytische Aktivität untersucht. KW - Ruthenium Komplexe KW - Metallosupramolekulare Chemie KW - Katalyse KW - Wasseroxidation KW - ruthenium complexes KW - metallosupramolecular chemistry KW - catalysis KW - water oxidation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154820 ER - TY - THES A1 - Auerhammer, Nina A. T1 - Energy Transfer and Excitonic Interactions in Conjugated Chromophore Arrangements of Bodipys and Pyrenes and Squaraines T1 - Energie Transfer und Exzitonische Wechselwirkungen in Konjugierten Chromophor Anordnungen von Bodipys und Pyrenen und Squarainen N2 - In this work the energy transfer and excitonic coupling in different chromophore arrangements were investigated. A difference in the coupling strength was introduced by varring the connecting unit and the spacial orientation relative to each other. The synthesis of the 2,7-substituted pyrene compounds could be optimised and good yields of HAB 1 and HAB 2 and small amounts of HAB 2 could be achieved by cobalt-catalysed trimerisation or Diels Alder reaction in the end. Absorption and fluorescence spectra reveal strong intramolecular interactions between the pyrene molecules in the HAB 1. Excitation spectra recorded at the high and low energy fluorescence suggest the contribution of two components to the spectra. One being similar to the ground state aggregate and a second species similar to undisturbed pyrene. All these feature can be accounted to two different fluorescent states which are due to electronical decoupling in the excited state. Due to the strong intramolecular coupling already in the ground state of the molecule, no energy transfer could be studied, as the six pyrene units cannot be seen as separate spectroscopic entities between which energy could be transferred. In the second part of this thesis dye conjugates of different size and alignment were synthesised to study the interaction of the transition-dipole moments. Therefore a systematic investigation of Sonogashira conditions was performed in order to obtain good yields of the desired compounds and keep dehalogenation at a minimum level. Nevertheless only the symmetrical triads could be purified as the asymmeric triads and pentades proved to decompose during purification. The pyrene containing triads Py2B and Py2SQB show small interactions already in the ground state represented by red shifts of the spectra and a broadening of the bands. Nevertheless, these interactions are in the weak coupling regime and energy transfer between the constituents is possible. On the contrary in the TA spectra it is obvious that always the whole triad, at least to some extend is excited. To question if the excitation of the high energy state is deactivated by energy transfer or rather IC in a superchromophore could not be distinguished in the course of this work. At present additional time-dependent calculations of the dynamics are in progress to get a deeper understanding of the photophysical processes taking place in the triads. The dye conjugates B2SQB-3 and (SQB)2B-4 can be assigned to the strong interaction range and hence are describable by exciton theory. The transition-dipole moments proved to be more than additive and increase for both compounds from absorption to fluorescence. This can be explained by an enhancement of the coupling in the relaxed excited state compared to the absorption into the Franck-Condon state due to a more steep potential energy surface in the excited state and hence smaller fluctuations. In the last part of this thesis the influence of disrupting electronical communication by implementing a rigid non-conjugated bridge in a bichromophoric trans-squaraine system was tested. While the flexible linked squaraines show complex spectra due to different conformers the SQA2Anth compound is rigified and no rotation is possible. This change in flexibility is represented in the steady-state spectra where just one main absorption and fluorescence band is present due to a single allowed excitonic state. The system proves to own an excited state that is completely delocalised over the whole molecule. N2 - Diese Arbeit beschäftigt sich mit der Untersuchung von Energietransfer und Exzitonenkopplung in Farbstoffen. Durch Variation der Verbrückungseinheit und der räumlichen Orientierung der Chromophore relativ zueinander konnte die Kopplungsstärke beeinflußt werden. Die Synthese von 2,7-substituierten Pyrenverbindungen konnte optimiert werden und schließlich gelang es mittels kobalt-katalisierten Trimerisierung oder Diels Alder Reaktionen gute Ausbeuten von HAB 1 und HAB 2 sowie geringere Mengen an HAB 3 zu isolieren. Absorption- und Fluoreszenzspektren deuten auf starke Wechselwirkungen unter den Chromophoren hin, die bereits im Grundzustand deutlich werden. Anregungsspektren bei verschiedenen Wellenzahlen zeigen, dass zwei verschiedene Spezies, wovon eine den Aggregaten die im Grundzustand vorhanden sind ähneln, zu den beobachteten spektralen Eigenschaften beitragen und ein weiteres größere Ähnlichkeit mit dem Pyrenmonomer aufweist. Betrachtet man all diese Eigenschaften im Gesamten kann man schlußfolgern, dass zwei fluoreszierende Zustände für die Desaktivierung verantwortlich sind, was sich auf elektronische Entkopplung im angeregten Zustand zurückführen lässt. Aufgrund der starken elektronischen Kopplung im Grundzustand und die Ausbildung von intramolekularen Aggregaten war es nicht möglich Energietransfer an diesem System zu studieren, da die sechs Pyreneinheiten nicht getrennt betrachtet werden können. Im zweiten Teil dieser Arbeit wurden Farbstoffkonjugate verschiedener Größe und Anordnung synthetisiert um die Wechselwirkung der Übergangsdipolmomente zu studieren. Dazu wurde ein systematsiches Reaktionscreening der Sonogashira-Kupplung durchgeführt, um Bedingungen zu finden, unter denen sich Dehalogenierung in Grenzen hält, jedoch gute Ausbeuten der gewünschten Endprodukte erzielt werden können. Trotzdem konnten nur die symmetrischen Trimere erfolgreich isoliert, da sich herausstellte, dass sowohl die unsymmetrischen Trimere als auch die Pentamere zu instabil für eine vollständige Aufreinigung sind. Die pyren-beinhaltenden Triaden Py2B und Py2SQB zeigen geringfügige Wechselwirkungen im Grundzustand, die sich durch eine Rotverschiebung und Verbreiterung der Absorptionsbanden zeigen. Allerding lässt sich diese Kopplung dem sehr schwachen Wechselwirkungsbereich zuordnen, sodass Energietransfer zwischen den Chromophoren möglich ist. Im Gegensatz dazu zeigt sich im TA Spektrum, dass gleichzeitig mehrere Teile der Triade angeregt sind und dass die Anregung nicht auf ein Chromophor lokalisiert ist. Die Frage, ob die Desaktivierung des angeregten Zustands durch Energietransfer oder interne Konversion in einem Superchromophor stattfindet, konnte im Zuge dieser Arbeit nicht geklärt werden. Aktuell sind zusätzliche Rechnungen (DFT) in Arbeit um ein besseres Verständnis von den ablaufenden, photophysikalischen Prozessen zu bekommen. Die Farbstoffkonjugate B2SQB-3 und (SQB)2B-4 lassen sich dem Bereich der starken Kopplung zuordnen und können daher mit der Exzitonentheorie beschrieben werden. Die Übergangsdipolmomente zeigen ein Verhalten, dass mehr als additiv ist und nehmen von der Absorption zur Fluoreszenz zu. Das lässt sich durch eine Verstärkung der Kopplung im relaxierten angeregten Zustand in Vergleich zur Absorption in den Franck-Condon Zustand erklären. Der Grund für dieses Phänomen ist eine deutlich schmalere, steilere Energiepotentialfläche im angeregten Zustand. Im letzten Teil dieser Arbeit wurde die elektronische Kommunikation in einem trans-Squaraindimer durch Einfügen einer nicht-konjugierten Brücke untersucht. Während die flexiblen Dimere komplexe Spektren aufgrund unterschiedlicher Konformere aufweisen, enthält SQA2Anth eine starre Brücke, die Rotationen verhindert. Diese Änderung der Flexibilität zeigt sich in den stationären Spektren durch eine Hauptabsorptions- und Fluoreszenzbande, da nur ein exzitonischer Zustand erlaubt ist. Das System weißt einen angeregten Zustand auf, der über das gesamte Molekül delokalisiert ist. KW - Chromophor KW - Energieaufnahme KW - Exziton KW - Pyrenderivate KW - Sonogashira-Hagihara-Reaktion KW - Bodipy KW - Hexaarylbenzene KW - Squaraine KW - Energy Transfer KW - Excitons KW - Pyrene KW - Sonogashira Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-166721 ER - TY - THES A1 - Hügel, Markus T1 - The control of nanomorphology in star-shaped mesogens T1 - Die Steuerung der Nanomorphologie von sternförmigen Mesogenen N2 - Stilbene-based star-shaped mesogens have been synthesized with and without fullerene guests. Thermotropic properties and the mechanism of space-filling in the mesophases of these systems have been examined. N2 - Auf Stilben basierende sternförmige Mesogene wurden mit als auch ohne Fullerengäste synthetisiert. Die thermotropen Eigenschaften und der Mechanismus der Raumfüllung in den Mesophasen dieser Systeme wurden untersucht. KW - Flüssigkristall KW - Fullerene KW - Porphyrin KW - Mesogen KW - Raumfüllung KW - Dyade KW - Nanosegregation KW - Fulleren-Netzwerk KW - Mesogen KW - Space filling KW - Dyad KW - Nanosegregation KW - fullerene network KW - Hekate Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-165321 ER - TY - JOUR A1 - Görl, Daniel A1 - Soberats, Bartolome A1 - Herbst, Stefanie A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Perylene bisimide hydrogels and lyotropic liquid crystals with temperature-responsive color change JF - Chemical Science N2 - The self-assembly of perylene bisimide (PBI) dyes bearing oligo ethylene glycol (OEG) units in water affords responsive functional nanostructures characterized by their lower critical solution temperature (LCST). Tuning of the LCST is realized by a supramolecular approach that relies on two structurally closely related PBI–OEG molecules. The two PBIs socially co-assemble in water and the resulting nanostructures exhibit a single LCST in between the transition temperatures of the aggregates formed by single components. This permits to precisely tune the transition from a hydrogel to a lyotropic liquid crystal state at temperatures between 26 and 51 °C by adjusting the molar fraction of the two PBIs. Owing to concomitant changes in PBI–PBI interactions this phase transition affords a pronounced color change with “fluorescence-on” response that can be utilized as a smart temperature sensory system. KW - perylene bisimide hydrogels Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-162459 VL - 7 IS - 11 ER - TY - JOUR A1 - Becam, Jérôme A1 - Walter, Tim A1 - Burgert, Anne A1 - Schlegel, Jan A1 - Sauer, Markus A1 - Seibel, Jürgen A1 - Schubert-Unkmeir, Alexandra T1 - Antibacterial activity of ceramide and ceramide analogs against pathogenic Neisseria JF - Scientific Reports N2 - Certain fatty acids and sphingoid bases found at mucosal surfaces are known to have antibacterial activity and are thought to play a more direct role in innate immunity against bacterial infections. Herein, we analysed the antibacterial activity of sphingolipids, including the sphingoid base sphingosine as well as short-chain C\(_{6}\) and long-chain C\(_{16}\)-ceramides and azido-functionalized ceramide analogs against pathogenic Neisseriae. Determination of the minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) demonstrated that short-chain ceramides and a ω-azido-functionalized C\(_{6}\)-ceramide were active against Neisseria meningitidis and N. gonorrhoeae, whereas they were inactive against Escherichia coli and Staphylococcus aureus. Kinetic assays showed that killing of N. meningitidis occurred within 2 h with ω–azido-C\(_{6}\)-ceramide at 1 X the MIC. Of note, at a bactericidal concentration, ω–azido-C\(_{6}\)-ceramide had no significant toxic effect on host cells. Moreover, lipid uptake and localization was studied by flow cytometry and confocal laser scanning microscopy (CLSM) and revealed a rapid uptake by bacteria within 5 min. CLSM and super-resolution fluorescence imaging by direct stochastic optical reconstruction microscopy demonstrated homogeneous distribution of ceramide analogs in the bacterial membrane. Taken together, these data demonstrate the potent bactericidal activity of sphingosine and synthetic short-chain ceramide analogs against pathogenic Neisseriae. KW - ceramide analogs KW - Neisseria KW - ceramide Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159367 VL - 7 ER - TY - JOUR A1 - Wolter, Steffen A1 - Aizezers, Janis A1 - Fennel, Franziska A1 - Seidel, Marcus A1 - Würthner, Frank A1 - Kühn, Oliver A1 - Lochbrunner, Stefan T1 - Size-dependent exciton dynamics in one-dimensional perylene bisimide aggregates JF - New Journal of Physics N2 - The size-dependent exciton dynamics of one-dimensional aggregates of substituted perylene bisimides are studied by ultrafast transient absorption spectroscopy and kinetic Monte-Carlo simulations as a function of the excitation density and the temperature in the range of 25-90 degrees C. For low temperatures, the aggregates can be treated as infinite chains and the dynamics is dominated by diffusion-driven exciton-exciton annihilation. With increasing temperature the aggregates dissociate into small fragments consisting of very few monomers. This scenario is also supported by the time-dependent anisotropy deduced from polarization-dependent experiments. KW - rotational diffusion KW - spectroscopy KW - dyes KW - annihilation KW - migration KW - films Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-135190 VL - 14 IS - 105027 ER - TY - INPR A1 - Lambert, Christoph A1 - Völker, Sebastian F. A1 - Koch, Federico A1 - Schmiedel, Alexander A1 - Holzapfel, Marco A1 - Humeniuk, Alexander A1 - Röhr, Merle I. S. A1 - Mitric, Roland A1 - Brixner, Tobias T1 - Energy Transfer Between Squaraine Polymer Sections: From helix to zig-zag and All the Way Back T2 - Journal of the American Chemical Society N2 - Joint experimental and theoretical study of the absorption spectra of squaraine polymers in solution provide evidence that two different conformations are present in solution: a helix and a zig-zag structure. This unique situation allows investigating ultrafast energy transfer processes between different structural segments within a single polymer chain in solution. The understanding of the underlying dynamics is of fundamental importance for the development of novel materials for light-harvesting and optoelectronic applications. We combine here femtosecond transient absorption spectroscopy with time-resolved 2D electronic spectroscopy showing that ultrafast energy transfer within the squaraine polymer chains proceeds from initially excited helix segments to zig-zag segments or vice versa, depending on the solvent as well as on the excitation wavenumber. These observations contrast other conjugated polymers such as MEH-PPV where much slower intrachain energy transfer was reported. The reason for the very fast energy transfer in squaraine polymers is most likely a close matching of the density of states between donor and acceptor polymer segments because of very small reorganization energy in these cyanine-like chromophores. KW - energy transfer dynamics KW - squaraine polymer Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159607 UR - http://dx.doi.org/10.1021/jacs.5b03644 N1 - This document is the unedited Author's version of a Submitted Work that war subsequently accepted for publication in Journal of the American Chemical Society, copyright American Chemical Society after peer review. To access the final edited and published work see doi:10.1021/jacs.5b03644. ER - TY - THES A1 - Dhara, Ayan T1 - Stimuli-Responsive Self-Assembly and Spatial Functionalization of Organic Cages Based on Tribenzotriquinacenes T1 - Stimuli-responsive Selbstorganisation und räumliche Funktionalisierung organischer Käfige auf Basis von Tribenzotriquinacenen N2 - Within this thesis, synthetic strategies for self-assembled organic cage compounds have been developed that allow for both stimuli-responsive control over assembly/disassembly processes and spatial control over functionalization. To purposefully operate the reversible assembly of organic cages, boron-nitrogen dative bonds have been exploited for the formation of a well-defined, discrete bipyramidal organic assembly in solution. Thermodynamic association equilibria for cage formation have been investigated by Isothermal Titration Calorimetry (ITC). Temperature-dependent NMR studies revealed a reversible cage opening upon heating and quantitative reassembly upon cooling. For the spatial functionalization of organic cages, two divergent molecular building units have been designed and synthesized, namely tribenzotriquinacene derivatives possessing a terminal alkyne moiety at the apical position and a meta-diboronic acid having a pyridyl group at the 2-position. Facile access to a variety of apically functionalized tribenzotriquinacenes has been illustrated by post-synthetic modifications at the terminal alkyne group by Sonogashira cross-coupling and azide-alkyne click reactions. Finally, these apically functionalized tribenzotriquinacene building blocks have been implemented into boronate ester-based organic cage compounds showing modular exohedral functionalities. N2 - Im Rahmen dieser Dissertation wurden Synthesiestrategien für selbstorganisierte organische Käfigstrukturen entwickelt, die eine stimuli-responsive Kontrolle über den Auf- und Abbau sowie eine räumliche Kontrolle über die Funktionalisierung dieser Nanostrukturen erlauben. Um den Assemblierungsprozess organischer Käfige gezielt zu steuern, wurden dative Bor-Stickstoff-Bindungen für die Bildung eines wohldefinierten, diskreten, bipyramidalen organischen Käfigs in Lösung eingesetzt. Die thermodynamischen Assoziationsleichgewichte für die Käfigbildung wurden durch isotherme Titrationskalorimetrie (ITC) tersucht. Temperaturabhängige NMR-Studien zeigten eine reversible Käfigöffnung beim Erwärmen und die quantitative Wiedergewinnung des Käfigs beim Abkühlen. Für die räumliche Funktionalisierung organischer Käfige wurden zwei divergente molekulare Bausteine entworfen und synthetisiert: Zum Einen Tribenzotriquinacen-Derivate die eine terminale Alkinfunktion an der apikalen Position aufweisen und zum Anderen eine meta-Diboronsäure mit einer Pyridylgruppe in 2-Position. Der einfache Zugang zu einer Vielzahl an apikal funktionalisierten Tribenzotriquinacenen wurde durch postsynthetische Modifizierungen der terminalen Alkineinheit durch Sonogashira-Kreuzkupplungen und Azid-Alkin-Klick-Reaktionen veranschaulicht. Schließlich wurden diese apikal funktionalisierten Tribenzotriquinacen-Bausteine in organische Boronatester-Käfige mit modularer exohedraler Funktionalität implementiert. KW - Selbstorganisation KW - Bor-Stickstoff-Verbindungen KW - Käfigverbindungen KW - Self-assembly KW - Selbstassemblierung KW - Cage KW - Boron-Nitrogen Dative Bond Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154762 ER - TY - THES A1 - Spenst, Peter T1 - Xylylene Bridged Perylene Bisimide Cyclophanes and Macrocycles T1 - Xylol verbrückte Perylenbisimid Cyclophane und Makrozyklen N2 - This work is concerned with the syntheses and photophysical properties of para-xylylene bridged macrocycles nPBI with ring sizes from two to nine PBI units, as well as the complexation of polycyclic aromatic guest compounds. With a reduced but substantial fluorescence quantum yield of 21% (in CHCl3) the free host 2PBI(4-tBu)4 can be used as a dual fluorescence probe. Upon encapsulation of rather electron-poor guests the fluorescence quenching interactions between the chromophores are prevented, leading to a significant fluorescence enhancement to > 90% (“turn-on”). On the other hand, the addition of electron-rich guest molecules induces an electron transfer from the guest to the electron-poor PBI chromophores and thus quenches the fluorescence entirely (“turn-off”). The photophysical properties of the host-guest complexes were studied by transient absorption spectroscopy. These measurements revealed that the charge transfer between guest and 2PBI(4-tBu)4 occurs in the “normal region” of the Marcus-parabola with the fastest charge separation rate for perylene. In contrast, the charge recombination back to the PBI ground state lies far in the “inverted region” of the Marcus-parabola. Beside complexation of planar aromatic hydrocarbons into the cavity of the cyclophanes an encapsulation of fullerene into the cyclic trimer 3PBI(4-tBu)4 was observed. 3PBI(4-tBu)4 provides a tube-like structure in which the PBI subunits represent the walls of those tubes. The cavity has the optimal size for hosting fullerenes, with C70 fitting better than C60 and a binding constant that is higher by a factor of 10. TA spectroscopy in toluene that was performed on the C60@3PBI(4-tBu)4 complex revealed two energy transfer processes. The first one comes from the excited PBI to the fullerene, which subsequently populates the triplet state. From the fullerene triplet state a second energy transfer occurs back to the PBI to generate the PBI triplet state. In all cycles that were studied by TA spectroscopy, symmetry-breaking charge separation (SB-CS) was observed in dichloromethane. This process is fastest within the PBI cyclophane 2PBI(4-tBu)4 and slows down for larger cycles, suggesting that the charge separation takes place through space and not through bonds. The charges then recombine to the PBI triplet state via a radical pair intersystem crossing (RP-ISC) mechanism, which could be used to generate singlet oxygen in yields of ~20%. By changing the solvent to toluene an intramolecular folding of the even-numbered larger cycles was observed that quenches the fluorescence and increases the 0-1 transition band in the absorption spectra. Force field calculations of 4PBI(4-tBu)4 suggested a folding into pairs of dimers, which explains the remarkable odd-even effect with respect to the number of connected PBI chromophores and the resulting alternation in the absorption and fluorescence properties. Thus, the even-numbered macrocycles can fold in a way that all chromophores are in a paired arrangement, while the odd-numbered cycles have open conformations (3PBI(4-tBu)4, 5PBI(4-tBu)4, 7PBI(4-tBu)4) or at least additional unpaired PBI unit (9PBI(4-tBu)4). With these experiments we could for the first time give insights in the interactions between cyclic PBI hosts and aromatic guest molecules. Associated with the encapsulation of guest molecules a variety of possible applications can be envisioned, like fluorescence sensing, chiral recognition and photodynamic therapy by singlet oxygen generation. Particularly, these macrocycles provide photophysical relaxation pathways of PBIs, like charge separation and recombination and triplet state formation that are hardly feasible in monomeric PBI dyes. Furthermore, diverse compound specific features were found, like the odd-even effect in the folding process or the transition of superficial nanostructures of the tetrameric cycle influenced by the AFM tip. The comprehensive properties of these macrocycles provide the basis for further oncoming studies and can serve as an inspiration for the synthesis of new macrocyclic compounds. N2 - In dieser Arbeit wurde die Synthese para-Xylol-verbrückter Makrozyklen nPBI mit Ringgrößen von zwei bis neun PBI Einheiten beschrieben und deren photophysikalische Eigenschaften sowie Komplexierungsvermögen für polyzyklische aromatische Gastverbindungen analysiert. Mit einer reduzierten, aber noch substantiellen Fluoreszenzquantenausbeute von 21% in CHCl3 eignet sich der freie Wirt 2PBI(4-tBu)4 als dualer Fluoreszenzsensor. Durch die Aufnahme von elektronenarmen Gästen wird die zur Fluoreszenzlöschung führende Wechselwirkung zwischen den Chromophoren unterbunden, was sich in einer deutlichen Steigerung der Fluoreszenzquantenausbeute auf > 90% widerspiegelt („turn-on”). Andererseits führt die Zugabe elektronenreicher Gäste zu einem Elektronentransfer vom Gast auf die elektronenarmen PBI-Chromophore und quencht die Fluoreszenz damit nahezu vollständig („turn-off”). Die photophysikalischen Eigenschaften der Wirt-Gast Komplexe wurden mittels transienter Absorptionsspektroskopie weitergehend untersucht. Diese Studien zeigten, dass die Ladungstrennung zwischen Gast und 2PBI(4-tBu)4 in der „normalen Region“ der Marcus-Parabel stattfindet mit der schnellsten Ladungstrennungsrate für Perylen. Im Gegensatz dazu liegt die Ladungsrekombination zurück zum PBI Grundzustand weit in der „invertierten Region“ der Marcus-Parabel. Neben der Komplexierung flacher aromatischer Kohlenwasserstoffe in die Kavitäten der Cyclophane konnte auch die Aufnahme von Fullerenen in das zyklische Trimer 3PBI(4 tBu)4 beobachtet werden. 3PBI(4-tBu)4 weist eine röhrenartige Struktur auf, in der die PBI-Untereinheiten die Wände der Röhren darstellen. Damit hat die Kavität die optimale Größe für die Aufnahme von Fullerenen, wobei C70 besser hinein passt als C60 und damit eine um den Faktor 10 höhere Bindungskonstante besitzt. Transiente Absorptions-spektroskopie des C60@3PBI(4-tBu)4 Komplexes zeigte in Toluol zwei Energietransfer-prozesse auf. Der erste erfolgt vom angeregten PBI zum Fulleren, welches daraufhin den Triplettzustand populiert. Vom Fulleren-Triplettzustand erfolgt ein zweiter Energie-transfer zurück zum PBI, was schließlich im PBI-Triplett Zustand mündet. Für alle mittels transienter Absorptionsspektroskopie untersuchten Zyklen konnte eine symmetriebrechende Ladungstrennung in Dichlormethan beobachtet werden. Dieser Prozess ist für das PBI Cyclophan 2PBI(4-tBu)4 am schnellsten und wird mit zunehmender Ringgröße langsamer. Demnach ist die Ladungstrennung abhängig von der räumlichen Nähe der PBI Chromophore und nicht von deren Verbrückung. Im Anschluss erfolgt eine Ladungsrekombination zum PBI-Triplettzustand über ein Radikalpaar (radical pair intersystem crossing RP-ISC-Mechanismus), was zur Gewinnung von Singulettsauerstoff in Ausbeuten von ~20% genutzt werden konnte. Bei Verwendung von Toluol als Lösungsmittel wurde eine intramolekulare Faltung der geradzahligen größeren Zyklen beobachtet, wodurch die Fluoreszenz gequencht und die 0-1 Übergangsbande der Absorption verstärkt wird. Kraftfeldberechnungen für 4PBI(4 tBu)4 legen eine Faltung zu Dimerpaaren nahe, welche den außergewöhnlichen gerade-ungerade Effekt bezogen auf die Anzahl der verknüpften PBI Chromophore und die daraus resultierende Alternanz in den Absorptions- und Fluoreszenzeigenschaften erklärt. Dementsprechend können die geradzahligen Makrozyklen in der Art falten, dass alle Chromophore in einer gepaarten Anordnung vorliegen, während die ungeradzahligen Zyklen offene Konformationen (3PBI(4 tBu)4, 5PBI(4 tBu)4, 7PBI(4 tBu)4) oder zumindest teilweise ungepaarte PBI-Einheiten (9PBI(4 tBu)4) aufweisen. Mit zunehmender Ringgröße erhöht sich der Anteil an gefalteten Untereinheiten, was dazu führt, dass sich die optischen Eigenschaften des ungeradzahligen 9PBI(4 tBu)4 Zyklus den vollständig gefalteten Systemen angleicht. Mit diesen Experimenten konnten wir erstmals Enblicke in die Wechselwirkungen zwischen zyklischen PBI-Wirten und aromatischen Gastmolekülen geben. Verbunden mit der Aufnahme von Gastmolekülen ist eine Reihe möglicher Anwendungen wie Fluoreszenzsensorik, Chiralitätserkennung und photodynamische Therapie über die Generierung von Singulettsauerstoff denkbar. Insbesondere ermöglichen diese Makrozyklen photophysikalische Relaxationspfade von PBIs wie die Ladungstrennung und –rekombination und die Ausbildung von Triplettzuständen, welche in monomeren PBI-Frabstoffen nur schwer realisierbar sind. Weiterhin konnten einige verbindungs-spezifische Eigenschaften gefunden werden, wie den gerade-ungerade Effekt im Faltungsprozess oder die für den tetrameren Zyklus gefundene Umwandlung von Oberflächennanostrukturen unter dem Einfluß der AFM-Spitze. Die reichhaltigen Eigenschaften dieser Makrozyklen bilden damit die Basis für weitergehende Untersuchungen und können als Inspiration für die Synthese neuer makrozyklischer Verbindungen dienen. KW - Supramolekulare Chemie KW - Wirt-Gast-Beziehung KW - Perylenbisimid KW - Energietransfer KW - Elektronentransfer KW - Perylene Bisimide KW - Energy Transfer KW - Electron Transfer KW - Elektronentransfer KW - Perylenderivate KW - Wirt-Gast-Komplex-Chemie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-139015 ER - TY - THES A1 - Liess, Andreas T1 - Structure-Property Relationships of Merocyanine Dyes in the Solid State: Charge Transport and Exciton Coupling T1 - Struktur-Eigenschafts-Beziehungen von Merocyaninfarbstoffen im Festkörper: Ladungstransport und Exzitonenkopplung N2 - The present thesis demonstrates the importance of the solid state packing of dipolar merocyanine dyes with regard to charge transport and exciton coupling. Due to the charge transport theory for disordered materials, it is expected that high ground state dipole moments in amorphous thin films lead to low mobility values due to a broadening of the density of states. However, due to their inherent dipolarity, merocyanine dyes usually align in antiparallel dimers in an ordered fashion. The examination of twenty different molecules with ground state dipole moments up to 15.0 D shows that by a high dipolarity and well-defined sterics, the molecules pack in a highly regular two-dimensional brickwork-type structure, which is beneficial for hole transport. Utilization of these molecules for organic thin-film transistors (OTFTs) leads to hole mobility values up to 0.21 cm²/Vs. By fabrication of single crystal field-effect transistors (SCFETs) for the derivative showing the highest mobility values in OTFTs, even hole mobilities up to 2.34 cm²/Vs are achieved. Hence, merocyanine based transistors show hole mobility values comparable to those of conventional p-type organic semiconductors and therefore high ground state dipole moments are not necessarily disadvantageous regarding high mobility applications. By examination of a different series of ten merocyanine dyes with the same chromophore backbone but different donor substituents, it is demonstrated that the size of the donor has a significant influence on the optical properties of thin films. For small and rigid donor substituents, a hypsochromic shift of the absorption compared to the monomer absorption in solution is observed due to the card stack like packing of the molecules in the solid state. By utilization of sterical demanding or flexible donor substituents, a zig-zag type packing is observed, leading to a bathochromical shift of the absorption. These packing motifs and spectral shifts with an offset of 0.93 eV of the H- and J-bands comply with the archetype examples of H- and J-aggregates from Kasha’s exciton theory. N2 - Im Rahmen der vorliegenden Doktorarbeit wird die Wichtigkeit der Packung von dipolaren Merocyaninfarbstoffen im Festkörper im Hinblick auf Ladungstransport sowie Exzitonenkopplung demonstriert. Aufgrund der Ladungstransporttheorie für ungeordnete Materialien wird erwartet, dass hohe Grundzustandsdipolmomente die Mobilität aufgrund einer Verbreiterung der Zustandsdichte verringern. Allerdings neigen Merocyanine durch ihre Dipolarität normalerweise zur Ausbildung von geordneten antiparallelen Dimeren. Durch Untersuchung von zwanzig verschiedenen Molekülen mit Grundzustandsdipolmomenten bis zu 15.0 D wird gezeigt, dass durch eine hohe Dipolarität sowie eine gut definierte Sterik der Moleküle eine hoch geordnete zweidimensionale Backstein-artige Packung erzielt wird, welche günstig für den Lochtransport ist. Hierdurch werden in organischen Dünnschichttransistoren (OTFTs) Lochmobilitäten bis zu 0.21 cm²/Vs erzielt. Durch Fertigung von Einkristallfeldeffekttransistoren (SCFETs) für das Derivat mit den höchsten Lochmobilitäten in OTFTs werden außerdem Lochmobilitäten bis zu 2.34 cm²/Vs demonstriert. Damit zeigen Merocyanin-basierte Transistoren ähnliche Lochmobilitätswerte wie konventionelle organische p-Halbleiter. Folglich sind hohe Grundzustandsdipolmomente für Anwendungen, welche hohe Mobilitäten erfordern, nicht zwangsläufig von Nachteil. Durch Untersuchung einer weiteren Serie von zehn Merocyaninfarbstoffen mit gleichem Chromophorgrundgerüst und verschiedenen Donorsubstituenten wird außerdem gezeigt, dass die Größe des Donors einen signifikanten Einfluss auf die optischen Eigenschaften von Dünnschichten hat. Für kleine und rigide Donorsubstituenten wird eine hypsochrome Verschiebung der Absorption im Vergleich zum Monomer in Lösung beobachtet, welche durch eine Kartenstapel-artige Packung der Farbstoffe im Festkörper bedingt wird. Bei der Verwendung von sterisch anspruchsvollen oder flexiblen Donorsubstituenten wird eine Zick-Zack-artige Packung beobachtet, welche eine bathochrome Verschiebung der Absorption bewirkt. Diese Packungsmotive und spektralen Verschiebungen mit einem Versatz von 0.93 eV der H- und J-Banden stehen im Einklang zu den typischen Beispielen von H- und J-Aggregaten aus Kashas Exzitonentheorie. KW - Exziton KW - Organischer Feldeffekttransistor KW - Organische Halbleiter KW - Merocyanine KW - Merocyanine dyes KW - Organic field-effect transistor KW - Organic semiconductors KW - Exciton coupling KW - Exzitonenkopplung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-152900 ER - TY - THES A1 - Arjona Esteban, Alhama T1 - Merocyanine Dyes as Organic Semiconductors for Vacuum-processed Solar Cell and Transistor Devices T1 - Merocyaninfarbstoffe als organische Halbleiter für vakuumprozessierte Solarzellen und Transistoren N2 - The present thesis comprises the synthesis of new functional merocyanine dyes, the study of their electro-optical properties as well as solid state packing and their application as p-type semiconductor materials in transistor and solar cell devices. The absorption properties of the obtained compounds could be modified by variation of the donor unit, the introduction of electron-withdrawing substituents in the acceptor unit or elongation of the polymethine chain. For a particular dye, the absorption band could be shifted by more than 160 nm by increasing the solvent polarity due to a conformational switch between a merocyanine-like and a cyanine-like structure. Single crystal analyses revealed that the studied dyes tend to pack either in an antiparallel fashion forming dimers with no overall dipole moment or in a staircase-like pattern where the dipole moments point to the same direction and are only balanced by another staircase oriented in the opposite direction (stair dimer). With respect to application as semiconductor materials, the latter packing arrangement resulted most favorable for charge carrier mobility. We concluded that this packing motif is preserved in the solar cell devices, where the selenium-containing dye afforded the highest performance of this series for an optimized planar-mixed heterojunction solar cell (6.2 %). N2 - Die vorliegende Arbeit beschreibt die Synthese neuer funktioneller Merocyaninfarbstoffe sowie die Studie ihrer elektro-optischen Eigenschaften, ihrer Packungsmotive im Festkörper und deren Anwendung als p-Halbleitermaterialien in Transistoren und Solarzellen. Die optischen Eigenschaften der erhaltenen Moleküle konnten durch Variation der Donoreinheiten, Einführung elektronenziehender Substituenten am Akzeptorgerüst oder durch Verlängerung der Polymethinkette modifiziert werden. Im Fall einer außergewöhnlichen Verbindung konnte die Absorption um mehr als 160 nm verschoben werden, indem die Lösemittelpolarität erhöht wurde. Diese Verschiebung entspricht einem Konformationswechsel zwischen einer merocyaninartigen zu einer cyaninartigen Struktur. Einkristallstrukturanalysen zeigten für mehrere Substanzen ein antiparalleles Packungsmuster, welches die Aufhebung des Dipolmoments auf der supramolekularen Ebene bewirkt. Die entstandenen Dimere können je nach Substituenten entweder isoliert vorliegen oder eindimensionale Stapel bilden. Andere Substanzen zeigten jedoch ein bisher unbekanntes Packungsmuster, in welchem sich die Moleküle mit parallelen Dipolmomenten in einer treppenartigen Struktur aufeinander stapeln. Das makromolekulare Dipolmoment der Treppe wird hierbei durch eine benachbarte Treppe, welche in Gegenrichtung orientiert ist, ausgeglichen. Dieses neue Packungsmotiv eignete sich sehr für guten Ladungstransport, wodurch der Wirkungsgrad einer optimierten Solarzelle des Selenderivats auf bis zu 6.2 % gesteigert werde konnte. KW - Merocyanine KW - Merocyanine dye KW - organische Solarzelle KW - organischer Transitor KW - organic solar cell KW - organic transistor Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129096 ER - TY - THES A1 - Schulze, Marcus T1 - Ruthenium Complexes as Water Oxidation Catalysts and Photosensitizers T1 - Rutheniumkomplexe als Wasseroxidationskatalysatoren und Photosensibilisatoren N2 - In der vorliegenden Arbeit werden Aspekte der photokatalytischen Wasseroxidationsreaktion behandelt. Der erste Themenschwerpunkt der Dissertation beschäftigt sich mit einem supramolekularen Makrozyklus, der drei Rutheniummetallzentren enthält. Dieser neuartige Katalysator zeigt eine sehr hohe katalytische Aktivität und gewährt neue Einblicke in den Mechanismus der Wasseroxidationsreaktion. Des Weiteren wird auf die mit Licht interagierenden Komponenten der photokatalytischen Wasseroxidation eingegangen. Hierbei haben sich azabenz-anellierte Perylenderivate als vielseitige Farbstoffklasse herausgestellt. Die Kombination dieser Farbstoffe mit Metallkomplexen liefert metallorganische Verbindungen, die als Photosensibilisatoren eingesetzt werden können. N2 - The thesis discusses aspects of the photocatalytic water oxidation reaction. The first chapter deals with a supramolecular macrocycle which contains three ruthenium metal centers. This novel catalyst shows promising catalytic activity and provides insides into the mechanism of the water oxidation reaction. After this part, the focus lies on the light interacting components of the photocatalytic water oxidation. In this regard, the azabenz-annulated perylene derivatives appeared to be a promising dye class. The combination of these chromophores and metal complexes result in metal organic compounds, which have photosensitizer potential. KW - Farbstoff KW - Ruthenium KW - Fotokatalyse KW - Photosensibilisator KW - Makrozyklus KW - macrocycle KW - Wasseroxidationsreaktion KW - water oxidation reation KW - Perylen-Farbstoffe KW - perylene dyes KW - Katalyse KW - Wasserspaltung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142454 ER - TY - JOUR A1 - Messi, Bernadette Biloa A1 - Ndjoko-Ioset, Karine A1 - Hertlein-Amslinger, Barbara A1 - Lannang, Alain Meli A1 - Nkengfack, Augustin E. A1 - Wolfender, Jean-Luc A1 - Hostettmann, Kurt A1 - Bringmann, Gerhard T1 - Preussianone, a New Flavanone-Chromone Biflavonoid from Garcinia preussii Engl. JF - Molecules N2 - A new flavanone-chromone biflavonoid, preussianone (1), has been isolated from the leaves of Garcinia preussii, along with four known biflavonoids. The absolute stereostructures were elucidated by chemical, spectroscopic, and chiroptical methods. The biological properties of the new biflavonoid against several bacterial strains were evaluated. KW - multiflora KW - minimal inhibitory concentration KW - absolute configuration KW - circular dichroism KW - C-13 NMR KW - guttiferae KW - flavenoids KW - extractives KW - biflavanoids KW - livingstonei KW - high-temperature NMR KW - antibacterial activity KW - Garcinia biflavonoids Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130881 VL - 17 IS - 5 ER - TY - THES A1 - Gershberg, Jana T1 - Self-assembled Perylene Bisimide Dimers and their Interaction with Double-stranded DNA T1 - Selbst-assemblierte Perylenbisimid-Dimere und ihre Wechselwirkung mit DNA N2 - The self-assembly of molecules based on π-π-interactions and hydrogen bonding is of significant importance in nature. These processes enable the formation of complex supramolecular structures with diverse functions. For the transfer of the concepts from nature to artificial supramolecular structures, a basic understanding of those processes is needed. For this purpose, π-conjugated aromatic molecules with an easy synthetic access are suitable as their functionalities can be changed effortless. Perylene bisimide (PBIs) dyes are attractive candidates since they fulfill these requirements owing to their tendency to self-assemble in solution due to their large aromatic π-surfaces. Furthermore, the changes of the optical properties (for instance absorption, emission or circular dichroism) of PBI dyes, caused by their self-assembly, are easy to study experimentally. Structural variations of PBI dyes including additional non-covalent interactions, such as hydro-gen bonding, enable to direct their self-assembly process. Thus, the formation of interesting su-pramolecular structures of PBI dyes could be realized, although, often of undefined size. The aim of this thesis was to develop strategies to restrict the aggregate size of PBI dyes. Therefore, de-fined structural features of PBI molecules were combined and a variation of external influences such as solvent and concentration included. Furthermore, DNA was utilized as a template for the limitation of the aggregate size of PBI dyes. Chapters 1 and 2 provide general information and describe examples from literature which are necessary to understand the following experimental work. The first chapter is based on the inter-actions of various molecules with DNA. Therefore, DNA is considered as a supramolecular biom-acromolecule containing specific structural and functional features to interact with small mole-cules. Afterwards, the main interaction modes of small molecules with DNA such as electrostatic interaction, intercalation and groove binding with corresponding examples are discussed. Among all techniques applied to study the interaction of ligands with DNA, UV/Vis absorption, fluores-cence and circular dichroism spectroscopy were described in detail. At the end of this chapter, examples of already pre-associated systems showing interactions with DNA are presented. The second chapter is focused on the determination and mathematic evaluation of the self-assembly processes. The simplest models such as monomer-dimer and isodesmic model are de-scribed and supplemented by examples. Furthermore, the simplest modification of the isodesmic model, the K2-K model, is presented. Additionally, experimental problems, which may arise dur-ing the investigations of the self-assembly processes, are addressed. For the description of the entire self-assembly process, a sufficiently large concentration range and an appropriate measure-ment method that is sensitive in this concentration range is necessary. Furthermore, the full transi-tion from the monomeric to the aggregated species has to be spectroscopically ascertainable. This enables an accurate mathematic evaluation of the self-assembly process and provides meaningful binding constants. The self-assembly pathway can be controlled by the variation of solvent, con-centration or temperature. However, this pathway can also be directed by a rational design of the molecular structure of the considered system. For example, a specific interplay of π-π-interactions and hydrogen bonding may promote isodesmic as well as cooperative growth into large struc-tures. The main focus of this thesis is to develop strategies to control the aggregate size of PBI dyes (Chapter 3). For this purpose, a PBI scaffold was designed which contains hydrogen bonding amide functions at the imide positions derived from the amino acid L-alanine and solubilizing side groups in the periphery (Figure 81). The variations of the residues R/R’ range from didodecylox-yphenyl, didodecylphenyl, dioligo(ethylene glycol)phenyl to branched and linear alkyl chains. The most extensive study of the aggregation behavior was performed for the PBI dye 5. Concen-tration-dependent 1H NMR and UV/Vis absorption measurements clearly revealed the formation of dimers in chloroform. Further investigations by means of 2D NMR, VPO and ITC confirmed the exclusive presence of dimer aggregates of PBI 5 in the investigated concentration range. Mo-lecular modelling studies, supported by NMR and FT-IR experiments, provided structural reasons for the absence of further growth into larger aggregates. The specific combination of π-π interac-tions and hydrogen bonds between the NH groups of the amide groups and the carbonyl oxygen atoms of the PBI core are decisive for the formation of the discrete dimer stack (see Figure 82). The investigations of the aggregation behavior of PBIs 6-9 were less extensive but consistent with the results obtained for PBI 5. However, the determined binding constants vary over a considera-ble range of 1.1 x 102 M-1 (PBI 8) to 1.4 x 104 M-1 (PBI 5). These differences could be attributed to structural variations of the dyes. The electron-rich phenyl substituent promoted the aggregation tendency of PBIs 5-7 compared with 8 and 9 that carry only alkyl side chains. Thus, the π-π in-teractions of bay-unsubstituted PBI cores in combination with hydrogen bonding of the amide functions control the formation of discrete dimers of these PBI dyes. The variation of conditions, such as solvent, change the aggregation behavior of PBI dyes. In the solvents toluene and/or methylcyclohexane, anti-cooperative growth into larger aggregates of PBI 5 was observed (Chapter 4). The important feature of this self-assembly process is the absence of isosbestic points over the whole concentration range in the UV/Vis absorption measurements. The preference for the dimeric species of PBI 5 remained in both solvents as well as in mixtures of them, but upon increasing the concentration these dimers self-assemble into larger aggregates. An important feature of the self-assembly process is the preferred formation of even-numbered aggregates compared to the odd-numbered ones (see Figure 83). Although, the conventional K2-K model provides plausible binding constants, it is not capable to describe the aggregation behavior adequately, since it considers a continuous size distribution. The gradual aggregation process over dimers, tetramers, hexamers, etc. was therefore analyzed with a newly developed K2-K model for anti-cooperative supramolecular polymerization. By the global analysis of the UV/Vis absorption spectra a very good agreement between the experimental and simulated spectra, which were based on the new K2-K model, was obtained. Furthermore, the calculated UV/Vis absorption spectra of a dimer and an aggregate highlighted the most important structural differences. The absorption spectrum of the dimer still has a pronounced vibronic structure which gets lost in the spectrum of the aggregate. In another part of this work, a series of water soluble PBI dyes were described which contain similar PBI scaffolds as PBIs 5-8 (Chapter 5). These PBI dyes self-assemble into similar dimer aggregates in water due to their positively charged side chains causing electrostatic repulsion be-tween the molecules (see Figure 84). Here, however, the self-assembly behavior has not been studied thoroughly in water due to the similarities of already reported PBI dyes. Instead, the focus here is on the characterization of the interactions of these dyes with DNA/RNA. The comprehensive studies using thermal denaturation experiments showed the high stability of these PBI/polynucleotide complexes. The spermine-functionalized PBI dyes having six positive charges showed strong interactions with DNA/RNA which was expressed in a signif-icant increase of the melting temperatures of DNA/RNA (ΔTm values between 7 and > 35 ° C). The dioxa analogues containing only two positive charges had lower enhancement of the melting temperature of DNA/RNA (ΔTm values between 3 and 30 ° C). A similar trend has been observed in the fluorimetric titrations. The spermine-functionalized PBI dyes showed high binding con-stants (log Ks = 9.2 - 9.8), independently of the used polynucleotides. In contrast, the dioxa ana-logues displayed smaller binding constants (log Ks = 6.5 - 7.9) without any correlation between binding affinity and binding strength of the PBI dyes and the applied polynucleotides. The CD-spectroscopic measurements revealed significant differences in the binding properties of the dyes with DNA/RNA. They were dependent on the steric hindrance of the amino acid residues at the imide position and their configuration on one side and the grooves properties of ds-DNA/RNA on the other side. The spectroscopic results confirmed the formation of excitonically coupled PBI dimers in the minor groove of ds-DNA and the major groove of ds-RNA. Depending on the se-quence, the grooves of the polynucleotides provide different amount of space for embedding molecules. The guanine amino groups protrude into the minor groove of the polynucleotide poly(dG-dC)2 increasing the steric hindrance, which is not the case for poly(dA-dT)2. Molecular modeling studies showed that the PBI dimers penetrate deeper into the groove of poly(dA-dT)2 due to the absence of the steric hindrance, in comparison to the groove of poly(dG-dC)2 (see Figure 85). N2 - Die Selbstassemblierung von Molekülen, die auf π-π-Wechselwirkungen und Wasenstoffbrücken-bindungen basiert, ist von entscheidender Bedeutung in der Natur. Selbstassemblierungsprozesse ermöglichen den Aufbau von komplexen supramolekularen Strukturen mit vielfältigen Funktio-nen. Um Konzepte aus der Natur für künstliche supramolekulare Systeme nutzen zu können, müs-sen die wesentlichen Abläufe der Selbstassemblierungsprozesse verstanden werden. Dazu eignen sich π-konjugierte aromatische Moleküle, die einen relativ einfachen synthetischen Zugang bieten und vielfältig funktionalisiert werden können. Perylenbisimid-Farbstoffe (PBI) stellen für diesen Zweck eine attraktive Substanzklasse dar, da sie aufgrund von großen aromatischen π-Flächen zur Selbstassemblierung tendieren. Zusätzlich können durch die Selbstassemblierung einhergehenden Änderungen der optischen Eigenschaften (beispielsweise Absorption, Emission oder Circulardich-roismus) von PBI-Farbstoffen einfach experimentell studiert werden. Die vielen strukturellen Va-riationsmöglichkeiten von PBI-Farbstoffen erlauben das Einbeziehen von weiteren nichtkovalen-ten Wechselwirkungen zwischen den Molekülen, beispielsweise Wasserstoffbrückenbindungen, sodass der Selbstassemblierungsprozess dirigiert werden kann. Mit diesem Ansatz gelang es bis-her interessante supramolekulare Strukturen von PBI-Farbstoffen aufzubauen, allerdings waren diese oft von undefinierter Größe. Daher war das Ziel dieser Arbeit die Entwicklung von Kon-zepten um die Aggregatgröße von PBI-Farbstoffen zu begrenzen. Hierzu wurden definierte Strukturmerkmale von PBI Molekülen kombiniert, der äußere Einfluss wie Lösungsmittel und Konzentration variiert und DNA als Templat für die größenlimitierte Aggregatstruktur der PBI-Farbstoffe eingesetzt. Die Kapitel 1 und 2 geben allgemeine Informationen und diskutieren Beispiele aus der Literatur, die nötig sind, um die nachfolgend diskutierten experimentellen Arbeiten zu verstehen. Das erste Kapitel diskutiert die Wechselwirkungen verschiedener Molekülen mit DNA. Hierbei wird DNA als ein supramolekulares Biomakromolekül betrachtet und seine spezifischen strukturellen und funktionalen Eigenschaften beschrieben, die für die Interaktionen mit kleinen Molekülen aus-schlaggebend sind. Die wichtigsten Interaktionsformen wie elektrostatische Wechselwirkungen mit dem Phosphatrückgrat, Interkalation durch π-π-Wechselwirkungen mit den Basenpaaren und Furchenbindung durch Wasserstoffbrückenbindungen und van der Waals-Wechselwirkungen werden anhand ausgewählter Beispiele diskutiert. Von der Vielzahl möglicher Techniken, die angewendet werden, um Wechselwirkungen zwischen Liganden und DNA zu untersuchen, wer-den UV/Vis-, Fluoreszenz- und Circulardichroismus-Spektroskopie in Detail erläutert. Am Ende des Kapitels werden Beispiele von Wechselwirkungen von bereits prä-assoziierten supramolekula-ren Systemen mit DNA vorgestellt. Das zweite Kapitel beschäftigt sich mit der Bestimmung und mathematischen Beschreibung von Selbstassemblierungsprozessen. Die einfachsten Modelle, wie das Monomer-Dimer und das iso-desmische Modell, werden beschrieben und mit Beispielen ergänzt. Des Weiteren wird die ein-fachste Modifikation des isodesmischen Modells, das K2-K Modell vorgestellt. Anschließend wird auf experimentelle Probleme eingegangen, die bei der Untersuchung von Selbstassemblie-rungsprozessen auftreten können. Um den Assemblierungsprozess vollständig beschreiben zu können, wird ein ausreichend großer Konzentrationsbereich und eine entsprechende Messtechnik, die für diesen Konzentrationsbereich empfindlich genug ist, benötigt. Des Weiteren sollte der vollständige Übergang vom Monomer zum assemblierten System spektroskopisch erfassbar sein. Dies ermöglicht eine akkurate mathematische Auswertung des Selbstassemblierungsprozesses und liefert sinnvolle Bindungskonstanten. Der Selbstassemblierungspfad kann oft durch Variation des Lösungsmittels, Konzentration und Temperatur kontrolliert werden. Darüber hinaus besteht die Möglichkeit, den Selbstassemblierungspfad mit Hilfe eines spezifischen Designs der molekularen Struktur von dem untersuchten System zu dirigieren. Es konnte gezeigt werden, dass ein beson-deres Zusammenspiel von π-π-Wechselwirkungen und Wasserstoffbrückenbindungen sowohl zum isodesmischen als auch kooperativen Wachstum von großen Strukturen führen kann. Der Hauptfokus dieser Arbeit liegt in der Entwicklung von Strategien für die Kontrolle der Aggregatgröße von PBI Farbstoffen. (Kapitel 3). Um dieses Ziel zu erreichen, wurde ein PBI Gerüst entworfen, das Amidfunktionen in den Imidpositionen für die Ausbildung von Wasser-stoffbrückenbindungen enthält, die von der Aminosäure L-Alanin abgeleitet wurden. Zusätzlich wurden in der Peripherie des Farbstoffgerüsts jeweils löslichkeitsfördernde Seitengruppen R/R‘ wie Didodecyloxyphenyl, Didodecylphenyl, Dioligo(ethyleneglykol)phenyl sowie verzweigte oder lineare Alkylketten eingeführt (siehe Abbildung 81). Der PBI-Farbstoff 5 wurde ausführlich im Hinblick auf sein Aggregationsverhalten untersucht. Konzentrationsabhängige 1H NMR- und UV/Vis Absorptionsmessungen haben klar gezeigt, dass im Lösungsmittel Chloroform dimere Strukturen ausgebildet werden. Begleitende Untersuchungen (2D NMR, VPO und ITC) bestätigten die ausschließliche Präsenz von Dimeren von 5 im experimentell zugänglichen Konzentrationsbereich. Molekulare Modellie-rungs-Studien, die durch NMR und FT-IR Untersuchungen unterstützt werden, illustrieren sehr gut die Ursachen für das Ausbleiben einer weiteren Aggregation zu größeren Strukturen. Die be-sondere Kombination aus den π-π-Wechselwirkungen und den Wasserstoffbrückenbindungen zwischen den NH-Gruppen der Amidfunktionen und den Carbonylsauerstoffen des PBI-Kerns sind demzufolge entscheidend für die Bildung des diskreten Dimer-Stapels (siehe Abbildung 82). Die Untersuchungen zum Aggregationsverhalten der PBI-Farbstoffe 6-9 waren weniger ausführ-lich, stehen aber im Einklang mit den für PBI 5 gefundenen Ergebnissen. Die ermittelten Bin-dungskonstanten variieren jedoch über einen beachtlichen Bereich von 1.1 x 102 M-1 (PBI 8) bis 1.4 x 104 M-1 (PBI 5). Diese Unterschiede konnten auf strukturelle Variationen der Farbstoffe zurückgeführt werden. Der elektronenreiche Phenylsubstituent förderte die Assemblierungsten-denz von PBIs 5-7 im Vergleich zu 8 und 9, die nur Alkylseitenkennten tragen. Die π-π-Wechselwirkungen der in den Buchpositionen unsubstituierten PBI-Kerne in Kombination mit wasserstoffbrückenbildenden Amidfunktionen steuern somit die Ausbildung diskreter Dimere dieser PBI-Farbstoffe. Durch die Variation der Bedingungen, beispielsweise des Lösungsmittels, ändert sich das Aggre-gationsverhalten der PBI-Farbstoffe. In den Lösungsmitteln Toluol und/oder Methylcyclohexan wurde für das PBI 5 anti-kooperatives Wachstum zu größeren Aggregaten beobachtet (Kapitel 4). Das entscheidende Merkmal dieses Selbstassemblierungsprozesses ist das Fehlen von isosbesti-schen Punkten über den kompletten Konzentrationsbereich in den UV/Vis Absorptionsmessun-gen. Die Bevorzugung der dimeren Struktur von PBI 5 blieb in beiden Lösungsmitteln bzw. de-ren Mischungen erhalten, allerdings assemblierten diese Dimere durch den Anstieg der Konzent-ration in größere Aggregate. Ein wichtiger Schritt im Selbstassemblierungsprozesses ist die bevor-zugte Bildung von geradzahligen Aggregaten gegenüber den ungeradzahligen Aggregaten (siehe Abbildung 83). Das konventionelle K2-K Modell liefert zwar plausible Bindungskonstanten, kann dieses Aggre-gationsverhalten aber nur ungenügend beschreiben, da hier von kontinuierlicher Größenverteilung ausgegangen wird. Der schrittweise Aggregationsprozess über Dimere, Tetramere, Hexamere usw. wurde daher im Folgenden mit einem neu entwickelten K2-K-Modell für anti-kooperatives supra-molekulares Wachstum analysiert. Durch die globale Analyse von UV/Vis Absorptionsspektren konnte eine sehr gute Übereinstimmung zwischen den experimentellen und den auf das neue K2-K Modell basierenden, simulierten Spektren erhalten werden. Des Weiteren zeigten berechnete UV/Vis Absorptionsspektren eines Dimer- und Aggregatspektrums die wichtigsten strukturellen Unterschiede. Das Absorptionsspektrum des Dimers weist immer noch eine ausgeprägte vibroni-sche Struktur auf, welche im Spektrum des Aggregats verloren geht. In einem weiteren Teil dieser Arbeit wird eine Serie von wasserlöslichen PBI-Farbstoffen be-schrieben, die ein ähnliches durch Aminosäuren funktionalisiertes PBI-Gerüst wie PBIs 5-8 auf-weisen (Kapitel 5). Aufgrund der positiv geladenen Seitenketten, die für die elektrostatische Ab-stoßung zwischen den Molekülen sorgen, aggregieren diese Farbstoffe in Wasser zu ähnlichen Dimerstrukturen (siehe Abbildung 84). Hier wurde allerdings das Selbstassemblierungsverhalten in Wasser aufgrund der strukturellen Ähnlichkeit zu bereits publizierten PBI-Farbstoffen nicht eingehend untersucht. Stattdessen lag der Fokus hier auf der Charakterisierung der Wechselwirkungen dieser Farbstoffe mit DNA/RNA. Die umfassenden Studien mit Hilfe von thermischen Denaturierungsstudien zeigten eine hohe Stabilität der PBI/Polynukleotid-Komplexe. Die Spermin-funktionalisierten PBI-Farbstoffe, welche sechs positive Ladungen aufweisen, zeigten starke Wechselwirkungen mit DNA/RNA, was sich durch deutliche Schmelzpunkterhöhung der DNA/RNA (ΔTm-Werte zwischen 7 und > 35 °C) äußerte. Die analogen Dioxa-Verbindungen mit nur zwei positiven La-dungen wiesen geringere Schmelztemperaturerhöhungen der jeweiligen DNA/RNA (ΔTm-Werte zwischen 3 und 30 °C) auf. Dieser Trend wurde auch in den fluorimetrischen Titrationsstudien beobachtet. Die Spermin-funktionalisierten PBI-Farbstoffe zeigten hohe Bindungskostanten (log Ks = 9.2 – 9.8), unabhängig von den verwendeten Polynukleotiden. Im Gegensatz dazu wie-sen die Dioxa-Analoge kleinere Bindungskonstanten (log Ks = 6.5 – 7.9) auf, wobei kein Zusam-menhang zwischen Bindungsaffinität und Bindungsstärke zwischen den PBI-Molekülen und den verwendeten Polynukleotiden hergestellt werden konnte. Die CD-spektroskopischen Messungen verdeutlichten die signifikanten Unterschiede in den Bindungseigenschaften der Farbstoffe mit DNA/RNA. Entscheidend waren die sterische Hinderung der Aminosäurereste in den Imidposi-tion und deren Konfiguration auf der einen Seite und die Furcheneigenschaften von ds-DNA/RNA auf der anderen Seite. Die spektroskopischen Ergebnisse belegten die Bildung von exzitonisch gekoppelten PBI-Dimeren in der kleinen Furche von ds-DNA und der großen Furche von ds-RNA. Die Furchen der Polynukleotide bieten unterschiedlich viel Raum für das Einbetten von Molekülen, was von der jeweiligen Sequenz abhängt. Die Guanin-Aminogruppen ragen in die kleine Furche des Polynukleotids poly(dG-dC)2, wodurch die sterische Hinderung im Vergleich mit dem Polynukleotid poly(dA-dT)2 zunimmt. Molekulare Modellierungsstudien belegten, dass die PBI-Dimere tiefer in die Furche von poly(dA-dT)2, als in die Furche von poly(dG-dC)2 einge-schlossen werden, was auf die eben genannte sterische Hinderung zurückgeführt werden kann (siehe Abbildung 85). KW - Perylentetracarbonsäurederivate KW - Perylene bisimide KW - Aggregat KW - Dimer-Konfiguration KW - DNS KW - aggregation KW - dimer KW - DNA Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136725 ER - TY - THES A1 - Ceymann, Harald T1 - Synthesis and Optical Spectroscopic Properties of Squaraine Superchromophores T1 - Synthese und Optisch Spektroskopische Eigenschaften von Squarain Superchromophoren N2 - In this work the successful synthesis, the linear and nonlinear spectroscopic properties as well as the electrochemical behaviour of some linear and star-shaped squaraine superchromophores that are based on indolenine derivatives were presented. The attempt to synthesise similar chromophores which contained only benzothiazole squaraines failed unfortunately. However, one trimer that contained mixed benzothiazole indolenine squaraines could be synthesised and investigated as well. The linear spectroscopic properties, like red-shift and broadening of the absorption, of all superchromophores could be explained by exciton coupling theory. The heterochromophores (SQA)2(SQB)-N, (SQA)(SQB)2-N and (SQA)(SQB)-NH displayed additional to the typical squaraine fluorescence from the lowest excited state some properties that could be assigned to localised states. While the chromophores with N-core showed very small emission quantum yields, the chromophores with the other cores and the linear oligomers display an enhancement compared to the monomers. Transient absorption spectroscopy experiments of the star-shaped superchromophores showed, that their formally degenerated S1 states are split due to a deviation of the ideal C3 symmetry. This is also the reason for the observation of an absorption band for the highest exciton state, which is derived from the S1-state of the monomers, as its transition-dipole moment would be zero in the symmetrical case. The linear oligomers and the star-shaped superchromophores with a benzene or triarylamine core showed at least additive, sometimes even weak cooperative, behaviour in the two-photon absorption experiments. Additional to higher two-photon absorption cross sections the chromophores showed a pronounced broadening of the nonlinear absorption, due to symmetry breaking and a higher density of states. Unfortunately it was not possible to solve the problem of the equilibrium of the cisoid and the transoid structure of donor substituted azulene squaraines, due to either instability of the squaraines or steric hindrance. N2 - Diese Arbeit beschreibt die Synthese von einigen linearen und stern-förmigen Squarain Superchromophoren die auf Indol Derivaten basieren. Außerdem werden sowohl deren lineare und nicht lineare spektroskopische Eigenschaften als auch ihr elektrochemisches Verhalten präsentiert. Der Versuch ähnliche Farbstoffe mit Benzothiazol Derivaten zu synthetisieren schlug leider fehl. Allerdings konnte ein stern-förmiges Trimer hergestellt und untersucht werden, dessen Äste aus einem gemischten Indol-Benzothiazol Squarain bestehen. Die linearen spektroskopischen Eigenschaften, wie Rotverschiebung und die Verbreiterung der Absorption, aller Superchromophore konnten mit Hilfe der Exzitonen-Kopplungs Theorie erklärt werden. Die Heterochromophore (SQA)2(SQB)-N, (SQA)(SQB)2-N und (SQA)(SQB)-NH zeigten zusätzlich zu der typischen Squarain Fluoreszenz aus dem niedrigsten angeregten Zustand einige Besonderheiten die lokalisierten Zuständen zugeordnet werden konnten. Während die Farbstoffe mit einem Stickstoffkern lediglich geringe Fluoreszenzquantenausbeuten zeigen, zeigen die anderen Superchromophore im Vergleich mit den monomeren Squarainen teilweise erheblich größere Fluoreszenzquantenausbeuten. Transiente Absorptionsspektroskopie Messungen der stern-förmigen Farbstoffe legen nahe, dass deren formell degenerierte S1 Zustände wegen einer Abweichung von der C3-Symmetrie aufspalten. Durch diese Abweichung bekommt auch der Übergang vom Grundzustand zum höchsten exzitonischen Zustand, der sich aus den S1-Zuständen der Monomere ableiten lässt, ein merkliches Übergangsdipolmoment und kann daher in den linearen Absorptionsspektren beobachtet werden. Die linearen Oligomere und die stern-förmigen Superchromophore die einen Benzol oder Triarylamin Kern haben zeigten mindestens additives, manchmal auch verstärkendes Verhalten in der Zweiphotonenabsorption. Zusätzlich zu den größeren molekularen Zweiphotonenabsorptions-Querschnitten sind auf Grund von Symmetriebrüchen und einer hohen Dichte von Zuständen die nicht linearen Absorptionsbanden merklich verbreitert. Im Falle der Donor substituierten Azulen-Squaraine, war es nicht möglich wegen sterischen Gründen oder unstabilen Zwischenprodukten in der Synthese, das Gleichgewicht der cisoiden und der transoiden Struktur so zu verschieben das in Lösung nur noch eine der beiden Strukturen beobachtet wird. KW - Squaraine KW - Squaraine KW - Chromophor Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136850 ER - TY - THES A1 - Bertleff-Zieschang, Nadja Luisa T1 - Galectin-1: A Synthetic and Biological Study of a Tumor Target T1 - Galectin-1: Eine Synthetische und Biologische Studie eines Tumortargets N2 - Galectin-1 (hGal-1) is overexpressed by numerous cancer types and previously conducted studies confirmed that the β-galactoside-binding protein mediates various molecular interactions associated with tumor growth, spread and survival. Upon interaction with carbohydrate-based binding epitopes of glycan structures on human cell surfaces galectin-1 induces proliferative, angiogenetic and migratory signals and modulates negative T cell regulation which essentially helps the tumor to evade the immune response. These findings attributed galectin-1 a pivotal role in tumor physiology and strongly suggest the protein as target for diagnostic and therapeutic applications. Within the scope of this work a strategy was elaborated for designing tailor-made galectin-1 ligands by functionalizing selected hydroxyl groups of the natural binding partner N-acetyllactosamine (LacNAc) that are not involved in the sophisticated interplay between the disaccharide and the protein. Synthetic modifications intended to introduce chemical groups i) to address a potential binding site adjacent to the carbohydrate recognition domain (CRD) with extended hGal-1-ligand interactions, ii) to implement a tracer isotope for diagnostic detection and iii) to install a linker unit for immobilization on microarrays. Resulting structures were investigated regarding their targeting ability towards galectin-1 by cocrystallization experiments, SPR and ITC studies. Potent binders were further probed for their diagnostic potential to trace elevated galectin-1 levels in microarray experiments and for an application in positron emission tomography (PET). N2 - Galectin-1 (hGal-1) wird von zahlreichen Tumoren überexprimiert und frühere Studien bestätigten, dass das β-Galactosid-bindende Protein verschiedene molekulare Wechselwirkungen vermittelt, welche in direktem Zusammenhang mit Tumorwachstum, -ausbreitung und -überleben stehen. Durch die Wechselwirkung mit Kohlenhydrat-basierten Bindungsepitopen von Glykanstrukturen auf Zelloberflächen induziert Galectin-1 proliferative, angiogenetische und migratorische Signale und moduliert die negative Regulierung von T-Zellen, entscheidend für den Tumor, um der Immunantwort zu entkommen. Diese Beobachtungen schreiben Galectin-1 eine zentrale Rolle in der Tumorphysiologie zu, was dieses Protein zu einem attraktiven Target für diagnostische und therapeutische Anwendungen macht. Im Rahmen dieser Arbeit wurde eine Synthesestrategie für das Design maßgeschneiderter Galectin-1 Liganden entwickelt, wobei ausgewählte Hydroxylgruppen des natürlichen Bindungspartners N-Acetyllactosamin (LacNAc), welche nicht an dem hochkomplexen Zusammenspiel zwischen Protein und Disaccharid beteiligt sind, funktionalisiert wurden. Synthetische Modifikationen wurden mit der Absicht eingeführt i) eine potentielle Bindungstasche in Nachbarschaft der Kohlenhydraterkennungsdomäne (CRD) zu adressieren, ii) einen Isotopenmarker für die diagnostische Detektion zu implementieren und iii) eine Brückeneinheit zu integrieren, welche einer späteren Immobilisierung auf Mikroarrays dient. Resultierende Strukturen wurden mittels Kokristallisationsexperimenten, SPR- und ITC-Studien auf ihre Fähigkeit untersucht, Galectin-1 zu adressieren. Erfolgreich entwickelte Liganden wurden zudem auf ihr diagnostisches Potential getestet, erhöhte Galectin-1-Spiegel in Microarray-Experimenten zu detektieren und könnten zukünftig Einsatz in der Positronen-Emissions-Tomographie (PET) finden. KW - Organische Synthese KW - Galectine KW - Kohlenhydrate KW - Molekulare Erkennung KW - Click-Chemie KW - carbohydrate chemistry KW - protein crystallography KW - galectin-1 KW - protein-ligand-interaction KW - N-acetyllactosamine Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101529 ER - TY - JOUR A1 - Jansen, Nils A1 - Ohlendorf, Birgit A1 - Erhard, Arlette A1 - Bruhn, Torsten A1 - Bringmann, Gerhard A1 - Imhoff, Johannes F. T1 - Helicusin E, Isochromophilone X and Isochromophilone XI: New Chloroazaphilones Produced by the Fungus Bartalinia robillardoides Strain LF550 JF - Marine Drugs N2 - Microbial studies of the Mediterranean sponge Tethya aurantium led to the isolation of the fungus Bartalinia robillardoides strain LF550. The strain produced a number of secondary metabolites belonging to the chloroazaphilones. This is the first report on the isolation of chloroazaphilones of a fungal strain belonging to the genus Bartalinia. Besides some known compounds (helicusin A (1) and deacetylsclerotiorin (2)), three new chloroazaphilones (helicusin E (3); isochromophilone X (4) and isochromophilone XI (5)) and one new pentaketide (bartanolide (6)) were isolated. The structure elucidations were based on spectroscopic analyses. All isolated compounds revealed different biological activity spectra against a test panel of four bacteria: three fungi; two tumor cell lines and two enzymes. KW - tethya aurantium KW - marine natural product KW - azaphilone KW - pentaketide KW - bartalinia robillardoides Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129649 VL - 11 IS - 3 ER - TY - JOUR A1 - Rest, Christina A1 - Mayoral, María José A1 - Fernández, Gustavo T1 - Aqueous Self-Sorting in Extended Supramolecular Aggregates JF - International Journal of Molecular Sciences N2 - Self-organization and self-sorting processes are responsible for the regulation and control of the vast majority of biological processes that eventually sustain life on our planet. Attempts to unveil the complexity of these systems have been devoted to the investigation of the binding processes between artificial molecules, complexes or aggregates within multicomponent mixtures, which has facilitated the emergence of the field of self-sorting in the last decade. Since, artificial systems involving discrete supramolecular structures, extended supramolecular aggregates or gel-phase materials in organic solvents or—to a lesser extent—in water have been investigated. In this review, we have collected diverse strategies employed in recent years to construct extended supramolecular aggregates in water upon self-sorting of small synthetic molecules. We have made particular emphasis on co-assembly processes in binary mixtures leading to supramolecular structures of remarkable complexity and the influence of different external variables such as solvent and concentration to direct recognition or discrimination processes between these species. The comprehension of such recognition phenomena will be crucial for the organization and evolution of complex matter. KW - co-aggregation KW - self-sorting KW - supramolecular chemistry KW - self-assembly Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-129435 VL - 14 IS - 1 ER - TY - THES A1 - Rest, Christina T1 - Self-assembly of amphiphilic oligo(phenylene ethynylene)-based (bi)pyridine ligands and their Pt(II) and Pd(II) complexes T1 - Selbstorganisation von amphiphilen oligo(phenylenethinylen)-basierten (Bi)pyridin-Liganden und ihrer Pt(II) und Pd(II) Komplexe N2 - The presented work in the field of supramolecular chemistry describes the synthesis and detailed investigation of (bi)pyridine-based oligo(phenylene ethynylene) (OPE) amphiphiles, decorated with terminal glycol chains. The metal-ligating property of these molecules could be exploited to coordinate to Pd(II) and Pt(II) metal ions, respectively, resulting in the creation of novel metallosupramolecular π-amphiphiles of square-planar geometry. The focus of the presented studies is on the self-assembly behaviour of the OPE ligands and their corresponding metal complexes in polar and aqueous environment. In this way, the underlying aggregation mechanism (isodesmic or cooperative) is revealed and the influence of various factors on the self-assembly process in supramolecular systems is elucidated. In this regard, the effect of the molecular design of the ligand, the coordination to a metal centre as well as the surrounding medium, the pH value and temperature is investigated. N2 - Die vorliegende Arbeit auf dem Gebiet der Supramolekularen Chemie beschäftigt sich mit der Synthese und detaillierten Untersuchung von (bi)pyridin-basierten Oligo(phenylenethinylen) (OPE)-Amphiphilen mit endständigen Glykolketten. Die komplexierende Eigenschaft dieser Moleküle wurde ausgenutzt um sie an Pd(II) bzw. Pt(II) Metallionen zu koordinieren, wobei neuartige metallosupramolekulare π-Amphiphile von quadratisch-planarer Geometrie entstehen. Das Hauptaugenmerk der beschriebenen Studien liegt auf der Selbstorganisation der OPE-Liganden und ihrer Metallkomplexe in polarer und wässriger Umgebung. Dabei wurde der zu Grunde liegende Aggregationsmechanismus (isodesmisch oder kooperativ) bestimmt und der Einfluss verschiedener Faktoren auf den Selbstorganisationsprozess in supramolekularen Systemen aufzeigt. Neben dem Effekt des Moleküldesigns des Liganden und dessen Koordination an ein Metallzentrum wird auch der des umgebenden Mediums, des pH-Wertes sowie der Temperatur erläutert. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Kooperativität KW - Aggregat KW - Amphiphile Verbindungen KW - cooperativity KW - non-covalent interactions KW - (bi)pyridine-based ligand KW - oligo(phenylene ethynylene) (OPE) KW - self-assembly KW - metallosupramolecular π-amphiphiles KW - Aggregation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-133248 ER - TY - THES A1 - Fimmel, Benjamin T1 - Perylene Bisimide Foldamers: Synthesis and In-Depth Studies of the Ground- and Excited States Properties T1 - Perylenbisimid-Foldmere: Synthese und eingehende Untersuchungen zu den Eigenschaften der Grund- und angeregten Zustände N2 - In this thesis the syntheses and detailed investigations on two foldable PBI systems were presented. The reversible, solvent-dependet folding/unfolding-behavior was used to study the ground and excited states properties of folda-dimer and folda-trimer by means of different spectroscopic methods as well as theoretical studies. The switching between charge transfer or excimer formation pathways of photoexcited molecules influenced by the spatial arrangement of chromophores within defined dye systems illustrates the impact of conformational preferences on functional properties. N2 - In dieser Arbeit wurden die synthetischen Anstrengungen sowie die profunden Untersuchungen zu zwei faltbaren PBI-Systemen mit definierter Struktur gezeigt. Das reversible Faltungsvermögen des Folda-Dimers und Folda-Trimers wurde hinsichtlich seiner Eigenschaften im Grundzustand sowie im angeregten Zustand mithilfe unterschiedlicher optischer Methoden sowie theoretischer Ansätze eingehend charakterisiert. Das durch die Konstellation der PBI-Chromophore zueinander bedingte Umschalten zwischen Ladungstransfer und Excimerbildung illustriert die große Bedeutung konformativer Präferenzen für die funktionellen Eigenschaften. KW - Perylenbisdicarboximide KW - Fluoreszenz KW - Elektronentransfer KW - Farbstoff KW - NMR-Spektroskopie KW - Moleküldynamik KW - Perylenbisimid Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-125173 ER - TY - THES A1 - Rehm, Stefanie T1 - Spermine-functionalized Perylene Bisimide Dyes: Synthesis and Self-assembly in Water T1 - Spermin-funktionalisierte Perylenbisimid Farbstoffe: Synthese und Selbstassemblierung in Wasser N2 - The main objective of this thesis was the design and synthesis of perylene bisimide dyes with sufficient water-solubility for the construction of self-assembled architectures in aqueous solutions. Beside these tasks another goal of this project was the control over the self-assembly process in terms of aggregate size and helicity, respectively. Within this thesis an appropriate synthesis for spermine-functionalized perylene bisimide dyes was developed and conducted successfully. The characterization of these building blocks and their course of self-assembly were investigated by NMR, UV/Vis and fluorescence spectroscopy as well as by atomic force and transmission electron microscopy. For the better understanding of the experimental results theoretical calculations were performed. N2 - Ziel dieser Dissertation war das Design und die Synthese von Perylenbisimiden mit hinreichender Wasserlöslichkeit, die für den Aufbau von selbständig assemblierten Strukturen in wässrigen Lösungen verwendet werden sollen. Ein weiteres Ziel dieses Projektes war die Kontrolle über den Prozess der Selbstanordnung hinsichtlich der Aggregatgröße beziehungsweise deren Helizität. Im Rahmen dieser Doktorarbeit wurde eine entsprechende Synthese für Spermin-funktionalisierte Perylenbisimide entworfen und erfolgreich durchgeführt. Die Charakterisierung dieser Bausteine und der Prozess deren Selbstanordnung wurde mit Hilfe von NMR-, UV/Vis- und Fluoreszenz-Spektroskopie aber auch mit Rasterkraft- und Elektronentransmissionsmikroskopie durchgeführt. Für das bessere Verständnis der experimentellen Ergebnisse wurden theoretische Berechnungen durchgeführt. KW - Perylenderivate KW - Selbstorganisation KW - perylene bisimide KW - spermine KW - polyamine KW - bola-amphiphile KW - fluorescence KW - Perylenbisimid KW - Spermin KW - Polyamin KW - Bola-Amphiphil KW - Fluoreszenz KW - Aggregation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123201 ER - TY - JOUR A1 - Wang, Hui A1 - Li, Min-Yi A1 - Katele, Félix Zongwe A1 - Satyanandamurty, Tirumani A1 - Wu, Jun A1 - Bringmann, Gerhard T1 - Decandrinin, an unprecedented \(C_9\)-spiro-fused 7,8-\( seco-ent\)-abietane from the Godavari mangrove \(Ceriops\ decandra\) JF - Beilstein Journal of Organic Chemistry N2 - Decandrinin (1), an unprecedented \(C_9\)-spiro-fused 7,8-\(seco-ent\)-abietane, was obtained from the bark of an Indian mangrove, \(Ceriops\ decandra\), collected in the estuary of Godavari, Andhra Pradesh. The constitution and the relative configuration of 1 were determined by HRMS (ESI) and extensive NMR investigations, and the absolute configuration by circular dichroism (CD) and optical-rotatory dispersion (ORD) spectroscopy in combination with quantum-chemical calculations. Decandrinin is the first 7,8-\(seco-ent\)-abietane. KW - ceriops decandra KW - abietane KW - absolute configuration KW - circular dichroism KW - decandrinin KW - rhizophoraceae Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-119983 SN - 1860-5397 VL - 10 ER - TY - THES A1 - Klein, Johannes Hubert T1 - Electron Transfer and Spin Chemistry in Iridium-Dipyrrin Dyads and Triads T1 - Elektronentransfer und Spinchemie in Iridium-Dipyrrin-Dyaden und -Triaden N2 - The successful synthesis of a family of donor-iridium complex-acceptor triads (T1–T6, pMV1 and mMV1) and their electrochemical and photophysical properties were presented in this work. Triarylamines (TAA) were used as donors and naphthalene diimide (NDI) as acceptor. A bis-cyclometalated phenylpyrazole iridium dipyrrin complex acts as a photosensitiser. In addition, a molecular structure of T1 was obtained by single crystal X-ray diffraction. Transient absorption spectroscopy experiments of these triads resembled that upon excitation a photoinduced electron transfer efficiently generates long-lived, charge-separated (CS) states. Thereby, the electron-transfer mechanism depends on the excitation energy. The presence of singlet and triplet CS states was clarified by magnetic-field dependent transient-absorption spectroscopy in the nanosecond time regime. It was demonstrated that the magnetic field effect of charge-recombination kinetics showed for the first time a transition from the coherent to the incoherent spin-flip regime. The lifetime of the CS states could be drastically prolonged by varying the spacer between the iridium complex and the NDI unit by using a biphenyl instead of a phenylene unit in T4. A mixed-valence (MV) state of two TAA donors linked to an iridium metal centre were generated upon photoexcitation of triad pMV1 and mMV1. The mixed-valence character in these triads was proven by the analysis of an intervalence charge-transfer (IV-CT) band in the (near-infrared) NIR spectral region by femtosecond pump-probe experiments. These findings were supported by TD-DFT calculations. The synthesis of dyads (D1–D4) was performed. Thereby the dipyrrin ligand was substituted with electron withdrawing groups. The electrochemical and photophysical characterisation revealed that in one case (D4) it was possible to generate a CS state upon photoexcitation. N2 - In dieser Arbeit wurden die erfolgreiche Synthese einer Donor-Iridiumkomplex-Akzeptor-Familie (Triaden T1–T6, pMV1 und mMV1) und deren elektrochemischen und photophyiskalischen Eigenschaften vorgestellt. Als Donor wurden Triarylamine (TAA) verwendet, als Akzeptoreinheit diente ein Naphthalin-Diimid (NDI). Ein bis-cyclometallierter Phenylpyrazol-Iridium-Dipyrrin-Komplex übernahm die Aufgabe des Photosensibilisators. Die synthetischen Arbeiten konnten mit einer molekularen Struktur von T1 mittels Röntgenbeugung eines Einkristalls ergänzt werden. Bei Photoanregung der Triaden mit transienter Absorptions-Spektroskopie wurde die sehr effiziente Bildung von langlebigen, ladungsgetrennten (CS) Zuständen beobachtet. Es wurde zudem herausgefunden, dass der Elektronentransfer (ET)-Mechanismus von der verwendeten Anregungswellenlänge abhängt. Der Nachweis von Singulett und Triplett CS-Zuständen wurde mittels magnetfeldabhängiger, transienter Absorptions-Spektroskopie erbracht. Eine Analyse des Magnetfeldeffekts der Ladungsrekombinations-Kinetik zeigte zum ersten Mal einen Übergang von einem kohärenten zu einem inkohärenten Spinumkehrprozess. Die Lebenszeit des CS-Zustandes ließ sich dramatisch verlängern indem die Phenylen- durch eine Biphenyl-Brückeneinheit zwischen dem Iridiumkomplex und dem NDI ersetzt wurde. Gemischvalente Zustände konnten mittels photinduziertem Elektronentransfer in den Triaden pMV1 und mMV1 erzeugt werden. Im Fall von pMV1 wurde eine intensive Intervalenz-Ladungstransfer (IV-CT) Bande im nahinfraroten Spektralbereich mittels Femtosekunden transienter Anregungs-Abfrage-Spektroskopie beobachtet werden. Die Analyse dieser IV-CT Bande wurde mit TD-DFT Rechnungen vervollständigt. Die Synthese von Dyaden (D1–D4) wurde erfolgreich durchgeführt, dabei wurde der Dipyrrin-Ligand mit elektronenziehenden Substituenten versehen. Die spektroskopische und elektrochemische Analyse erbrachte nach erfolgter Lichtanregung in einem Fall (D4) ebenfalls einen CS-Zustand. KW - Elektronentransfer KW - Spin flip KW - Triad KW - Ladungstransfer KW - Photosensibilisator KW - photoinduced electron transfer KW - charge-separated state KW - spin chemistry KW - donor-photosensibilisator-acceptor triad KW - iridium complex KW - photoinduzierter Elektronentransfer KW - Spinchemie KW - Donor-Photosensibilisator-Akzeptor Triade KW - Iridiumkomplexe Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-118726 ER - TY - JOUR A1 - Kunz, Anna Lena A1 - Labes, Antje A1 - Wiese, Jutta A1 - Bruhn, Torsten A1 - Bringmann, Gerhard A1 - Imhoff, Johannes F. T1 - Nature's Lab for Derivatization: New and Revised Structures of a Variety of Streptophenazines Produced by a Sponge-Derived Streptomyces Strain JF - Marine Drugs N2 - Eight streptophenazines (A-H) have been identified so far as products of Streptomyces strain HB202, which was isolated from the sponge Halichondria panicea from the Baltic Sea. The variation of bioactivities based on small structural changes initiated further studies on new derivatives. Three new streptophenazines (I-K) were identified after fermentation in the present study. In addition, revised molecular structures of streptophenazines C, D, F and H are proposed. Streptophenazines G and K exhibited moderate antibacterial activity against the facultative pathogenic bacterium Staphylococcus epidermidis and against Bacillus subtilis. All tested compounds (streptophenazines G, I-K) also showed moderate activities against PDE 4B. KW - marine natural product KW - phenazine KW - Baltic Sea KW - streptomyces KW - halichondria panicea KW - obstructive pulmonary disease KW - phosphodiesterase-4 inhibitor KW - absolute configuration KW - biosynthesis KW - rofumilast Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-116816 SN - 1660-3397 VL - 12 IS - 4 ER - TY - THES A1 - Steeger, Markus T1 - Energy and Charge Transfer in Donor-Acceptor Substituted Hexaarylbenzenes T1 - Energie- und Ladungstransfer in Donor-Akzeptor-substituierten Hexaarylbenzolen N2 - The focus of this work was the investigation of energy transfer between charge transfer states. For this purpose the multidimensional chromophores HAB-S, HAB-A, B1 and B2 were synthesised, each consisting of three electron donor and three electron acceptor redox centres linked symmetrically or asymmetrically by the hexaarylbenzene framework. Triarylamines represent in all these compounds the electron donors, whereas the electron poor centres were triarylboranes in B1 and B2 and PCTM centres in HAB-S and HAB-A, respectively. The hexaarylbenzenes were obtained by cobalt catalysed cyclotrimerisation of the respective tolan precursors. In addition, Star was synthesised, which consists of a central PCTM linked to three triarylamin centres by tolan bridging units in a star-like configuration. The hexaarylbenzene S1a/b substituted with six squaraine chromophores could not be realised. It is assumed that the cyclotrimerisation catalyst Co2(CO)8 does not tolerate the essential hydroxyl groups in the tolan precursor S2a. The alternative reaction pathway to execute the cyclotrimerisation reaction first and introduce the hydroxyl groups thereafter failed as well, because the required hexaarylbenzene substituted by six semisquaric acid moieties could not be synthesised. However, energy transfer interactions could be investigated in the tolan precursor S2a with two squaraine units to obtain information about the electronic coupling provided by the tolan bridge. For all multidimensional compounds model molecules were synthesised with only a single donor-acceptor pair (B3, Star-Model and HAB-Model). This allows a separate consideration of energy and charge transfer processes. It has to be stressed that in all before mentioned multidimensional compounds the “through bond” energy transfer interaction between neighbouring IV-CT states is identical to a transfer of a single electron between two redox centres of the same kind (e.g. TAA -> TAA+). The latter can be analysed by electron transfer theory. This situation is observed when the two IV-CT states transferring energy share one redox centre. All compounds containing PCTM centres were characterised by paramagnetic resonance spectroscopy. Thereby, a weak interaction between the three PCTM units in HAB-S and HAB-A was observed. In addition, when oxidising Star-Model, a strongly interacting singlet or triplet state was obtained. In contrast, signals corresponding to a weakly interacting biradical were obtained for HAB-Model+. This indicates a strong electronic coupling between the redox centres provided by the tolan bridge and a weak coupling when linked by the hexaarylbenzene. This trend is supported by UV/Vis/NIR absorption measurements. The analysis of the observed IV-CT absorption bands by electron transfer theory reveals a weak electronic coupling of V = 340 cm-1 in HAB-Model and a distinctly stronger coupling of V = 1190-2900 cm-1 in Star-Model. In the oxidised HAB-S+, Star+ and Star-Model+ a charge transfer reversed from that of the neutral species, that is, from the PCTM radical to the electron poorer cationic TAA centre, was observed by spectroelectrochemistry. The temporal evolution of the excited states was monitored by ultrafast transient absorption measurements. Within the first picosecond stabilisation of the charge transfer state was observed, induced by solvent rotation. Anisotropic transient absorption measurements revealed that within the lifetime of the excited state (tau = 1-4 ps) energy transfer does not occur in the HABs whereas in the star-like system ultrafast and possibly coherent energy redistribution is observed. Taken this information together the identity between energy transfer and electron transfer in the specific systems were made apparent. It has to be remarked that neither energy transfer nor charge transfer theory can account for the very fast energy transfer in Star. The electrochemical and photophysical properties of B1 and B2 were investigated by cyclic voltammetry, absorption and fluorescence measurements and were compared to B3 with only one neighbouring donor-acceptor pair. For the asymmetric B2 CV measurements show three oxidations as well as three reduction peaks whose peak separation is greatly influenced by the conducting salt due to ion-pairing and shielding effects. Consequently, peak separations cannot be interpreted in terms of electronic couplings in the generated mixed valence species. Transient absorption, fluorescence solvatochromism and absorption spectra show that charge transfer states from the amine to the boron centres are generated after optical excitation. The electronic donor-acceptor interaction is weak though as the charge transfer has to occur predominantly through space. The electronic coupling could not be quantified as the CT absorption band is superimposed by pi-pi* transitions localised at the amine and borane centres. However, this trend is in good agreement to the weak coupling measured for HAB-Model. Both transient absorption and fluorescence upconversion measurements indicate an ultrafast stabilisation of the charge transfer state in B1- B3 similar to the corresponding observations in HAB-S and Star. Moreover, the excitation energy of the localised excited charge transfer states can be redistributed between the aryl substituents of these multidimensional chromophores within fluorescence lifetime (ca. 60 ns). This was proved by steady state fluorescence anisotropy measurements, which further indicate a symmetry breaking in the superficially symmetric HAB. Anisotropic fluorescence upconversion measurements confirm this finding and reveal a time constant of tau = 2-3 ps for the energy transfer in B1 and B2. It has to be stressed that, although the geometric structures of B1 and HAB-S are both based on the same framework and furthermore the neighbouring CT states show in both cases similar Coulomb couplings and negligible “through bond” couplings, very fast energy transfer is observed in B1 whereas in HAB-S the energy is not redistributed within the excited state lifetime. To explain this, it has to be kept in mind that the energy transfer and the relaxation of the CT state are competing processes. The latter is influenced moreover by the solvent viscosity. Hence, it is assumed that this discrepancy in energy transfer behaviour is caused by monitoring the excited state in solvents of varying viscosity. Adding fluoride ions causes the boron centres to lose their acceptor ability due to complexation. Consequently, the charge transfer character in the donor-acceptor chromophores vanishes which could be observed in both the absorption and fluorescence spectra. However, the fluoride sensor ability of the boron centre is influenced strongly by the moisture content of the solvent possibly due to hydrogen bonding of water to the fluoride anions. UV/Vis/NIR absorption measurements of S2a show a red-shift by 1800 cm-1 of the characteristic squarain band compared to the model compound S20. From exciton theory a Coulomb coupling of V = 410 cm-1 is calculated which cannot account for this strong spectral shift. Consequently, “through-bond” interactions have to contribute to the strong communication between the two squaraine chromophores in S2a. This is in accordance with the strong charge transfer coupling calculated for the tolan spacer in Star-Model. N2 - Ziel dieser Arbeit war die Untersuchung des Energietransfers zwischen Ladungstransfer-Zuständen in multidimensional Donor-Akzeptor Systemen. Zu diesem Zweck wurden die Chromophore HAB-S, HAB-A, B1 und B2 synthetisiert. Diese bestehen jeweils aus drei Elektronen-Donoren und Elektronen-Akzeptoren, die über das Hexaarylbenzol-Gerüst symmetrisch oder asymmetrisch verknüpft sind. Triarylamine stellen dabei die Elektronen-Donoren dar, während Triarylborane in B1 und B2 und PCTM-Zentren in HAB-S und HAB-A die Aufgabe der Elektronen-Akzeptoren übernehmen. Die Hexaarylbenzole konnten durch Cobalt-katalysierte Cyclotrimerisierung der entsprechenden Tolan-Vorstufen hergestellt werden. Zusätzlich wurde das multidimensionale Chromophor Star synthetisiert. Dieses besteht aus einem zentralen PCTM, welches über Tolan-Brückeneinheiten sternförmig mit drei Triarylamin Zentren verknüpft ist. Das Hexaarylbenzol S1a/b, das mit sechs Squarain Chromophoren substituiert ist, konnte nicht realisiert werden. Möglichweise werden die essentiellen Hydroxygruppen der Tolan-Vorstufe S2a nicht von dem Cyclotrimerisierungs-Katalysator Co2(CO)8 toleriert. Der alternative Reaktionsweg, die Cyclotrimerisierung zuerst durchzuführen und anschließend die Hydroxygruppen einzuführen, schlug ebenfalls fehl. Grund dafür war, dass das Hexaarylbenzol, welches mit sechs Quadratsäure-Einheiten substituiert ist, nicht synthetisiert werden konnte. Nichtsdestotrotz konnten Energietransfer Wechselwirkungen in der Tolan-Vorstufe S2a untersucht werden. Dabei konnte die elektronische Kopplung zwischen den zwei Squarain-Zentren charakterisiert werden. Zu allen multidimensionalen Verbindungen wurden zusätzlich Modelverbindungen mit nur einem einzelnen Donor-Akzeptor-Paar hergestellt (B3, Star-Model und HAB-Model). Dadurch konnten die Energie- und Ladungstransferprozesse getrennt betrachten werden. Es soll noch angemerkt werden, dass in allen genannten multidimensionalen Verbindungen der Energietransfer „über Bindungen“ zwischen zwei benachbarten IV-CT Zuständen identisch ist mit dem Transfer eines einzelnen Elektrons zwischen zwei gleichartigen Redoxzentren (z.B. TAA→TAA+). Diese Situation ist immer dann zu beobachten, wenn sich die zwei IV-CT Zustände, zwischen denen Energie übertragen wird, ein Redox-Zentrum teilen. Alle Verbindungen, die PCTM Zentren beinhalten, wurden durch Elektronenspinzresonanz Experimente charakterisiert. Dabei wurde eine schwache Wechselwirkung zwischen den drei PCTM Einheiten in HAB-S und HAB-A beobachtet. Durch die Oxidation von Star-Model konnten zudem stark wechselwirkende Singlett- bzw. Triplettzustände erhalten werden. Dagegen wurden für HAB-Model+∙ Signale beobachtet, die einem schwach wechselwirkendem Biradikal entsprechen. Das lässt darauf hindeuten, dass die Tolan-Brückeneinheit eine starke Kopplung zwischen den Redox-Zentren gewährleistet, während die Verknüpfung über das Hexaarylbenzol-Gerüst eine schwache Kopplung zur Folge hat. Dieser Trend wurde durch UV/Vis/NIR Absorptionsmessungen gestützt. Durch die Analyse der beobachteten IV-CT Absorptionsbanden mittels Elektronentransfer-Theorie konnte eine schwache Kopplung von V = 340 cm-1 in HAB-Model und eine deutlich stärkere Kopplung von V = 1190-2900 cm-1 in Star-Model ermittelt werden. In spektroelektrochemischen Untersuchungen wurde in den oxidierten Verbindungen HAB-S+, Star+ und Star-Model+, im Vergleich zu den neutralen Verbindungen, der Ladungstransfer in entgegengesetzter Richtung beobachtet. D.h. vom PCTM-Radikal zum elektronenärmeren, kationischen TAA-Zentrum. Die zeitliche Entwicklung der angeregten Zustände wurde mit transienter Absorptionsspektroskopie verfolgt. Innerhalb der ersten Pikosekunden konnte eine Stabiliserung des Ladungstransferzustands, verursacht durch Umorientierungen des Lösungsmittels, beobachtet werden. Anisotrope, transiente Absorptionsmessungen konnten zeigen, dass innerhalb der Lebenszeit des angeregten Zustands (τ = 1-4 ps) kein Energietransfer in den HABs stattfindet, während in dem sternförmigen System eine ultraschnelle und möglicherweise koherente Energieumverteilung beobachtet wurde. Letztendlich konnte klargestellt werden, dass Energietransfer und Ladungstransfer in diesen speziellen Systemen identisch sind. Jedoch konnte weder die Energie-, noch die Ladungstransfertheorie den sehr schnellen Energietransfer in Star erklären. Die elektrochemischen und photophysikalischen Eigenschaften von B1 und B2 wurden mittels Cyclovoltammetrie, Absorptions- und Fluoreszenzmessungen untersucht und mit B3 verglichen. Im Fall vom asymmetrischen B2 zeigten CV Messungen drei Oxidations- und drei Reduktionspeaks, wobei der Abstand zwischen den Peaks stark vom Leitsalz abhing. Dies lässt sich auf Ionenpaar und Abschirmungseffekte zurückführen. Folglich konnten die Abstände zwischen den Peaks nicht in Bezug auf elektronische Kopplungen in den erzeugten, gemischtvalenten Verbindungen interpretiert werden. Transiente Absorption, Fluoreszenz Solvatochromie sowie Absorptionsspektren zeigten, dass nach optischer Anregung Ladungstransferzustände vom Amin- zum Borzentrum bevölkert werden. Die elektronische Donor-Akzeptor Wechselwirkung war jedoch schwach, da der Ladungstransfer hauptsächlich über den Raum stattfindet. Die elektronische Kopplung konnte nicht quantifiziert werden, weil die CT Absorptionsbande von π-π* Übergängen, die an den Amin- und Borzentren lokalisiert sind, überlagert war. Der Trend ist jedoch in guter Übereinstimmung mit der schwachen Kopplung, die für HAB-Model gemessen wurde. Sowohl transiente Absorptions- wie auch Fluoreszenz-Aufkonversionsmessungen deuten auf eine ultraschnelle Stabilisierung des Ladungstransferzustandes in B1 - B3, ähnlich dem Verhalten von HAB-S und Star, hin. Des Weiteren kann die Anregungsenergie der lokalisierten, angeregten Ladungstransferzustände innerhalb der Fluoreszenzlebensdauer (ca. 60 ns) zwischen den Arylsubsituenten dieser multidimensionalen Chromophore umverteilt werden. Dies wurde mit stationären Fluoreszenz-Anisotropiemessungen bewiesen, die weiterhin einen Symmetriebruch im vermeintlich symmetrischen HAB andeuten. Anisotrope Fluoreszenz-Aufkonversionsmessungen bestätigten diese Schlussfolgerung und zeigten eine Zeitkonstante von τ = 2-3 ps für den Energietransfer in B1 und B2. Es soll darauf hingewiesen werden, dass obwohl die geometrischen Strukturen von B1 und HAB-S beide auf dem gleichen Grundgerüst basieren und weiterhin benachbarte CT Zustände in beiden Fällen ähnliche Coulomb Kopplungen und vernachlässigbare Kopplungen „über Bindungen“ aufweisen, in B1 ein sehr schneller Energietransfer beobachtet werden konnte, während in HAB-S die Anregungsenergie innerhalb der Fluoreszenzlebenszeit nicht umverteilt wird. Um dies zu erklären, muss berücksichtigt werden, dass Energietransfer und die Relaxation des CT Zustands konkurrierende Prozesse darstellen. Letzteres wird zudem von der Viskosität des Lösungsmittels beeinflusst. Demnach wird angenommen, dass der Unterschied im Ladungstransferverhalten auf die Verwendung von unterschiedlich viskosen Lösungsmitteln zurückzuführen ist. Wenn Fluorid-Ionen zugesetzt wurden, verloren die Borzentren auf Grund von Komplexierung die Akzeptoreigenschaften. Folglich ging der Ladungstransfercharakter in den Donor-Akzeptor-Verbindungen verloren, was mittels Absorptions- und Fluoreszenzspektroskopie verfolgt wurde. Die Fluorid-Sensor-Eigenschaften der Borzentren war jedoch stark vom Feuchtigkeitsgehalt des Lösungsmittels beeinflusst. Dies ist wahrscheinlich auf starke Wasserstoffbindungen zwischen Wasser Molekülen und Fluorid-Ionen zurückzuführen. UV/Vis/NIR Absorptionsmessungen von S2a zeigten im Vergleich zur Modelverbindung S20 eine Rotverschiebung der charakteristischen Squarain Bande um 1800 cm-1. Anhand der Excitonen-Theorie konnte eine Coulomb Kopplung von V = 410 cm-1 berechnet werden, die jedoch diese starke Verschiebung nicht erklären kann. Demnach müssen Wechselwirkungen „durch Bindungen“ mit zu dieser guten Kommunikation zwischen den beiden Squarain Chromophoren in S2a beitragen. Diese Annahme stimmt mit der starken Ladungstransfer Kopplung überein, die für die Tolan-Brücke in Star-Model berechnet wurde. KW - Energietransfer KW - Ladungstransfer KW - energy transfer KW - charge transfer KW - hexaarylbenzenes KW - Energietransfer KW - Ladungstransfer KW - Hexaarylbenzole Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112520 ER - TY - JOUR A1 - Epe, Bernd A1 - Häring, Martin A1 - Ramaiah, Danaboyina A1 - Stopper, Helga A1 - Abou-Elzahab, Mohamed M. A1 - Adam, Waldemar A1 - Saha-Möller, Chantu R. T1 - DNA damage induced by furocoumarin hydroperoxides plus UV (360 nm) N2 - Wben irradiated at 360 nm, furocoumarins with a hydroperoxide group in a side chain effciently give rise to a type of DNA damage that can best be explained by a photoinduced generation of hydroxyl radicals from the excited pbotosensitizers. The observed DNA damage profiles, i.e. the ratios of single-strand breaks, sites of base loss (AP sites) and base modifications sensitive to fonnamidopyrimidine-DNA glycosylase (FPG protein) and endonuclease m, are similar to the DNA damage profile produced by hydroxyl radicals generated by lonizing radiation or by xanthine and xanthine oxidase in the presence of Fe(III)-EDTA. No such damage is observed with the corresponding furocoumarin alcohols or in the absence of near-UV radiation. The damage caused by the photo-excited hydroperoxides is not influenced by superoxide dismutase (SOD) or catalase or by D2O as solvent. The presence of t-butanol, however, reduces both the formation of single-strand breaks and of base odifications sensitive to FPG protein. The cytotoxicity caused by one of the hydroperoxides in L5178Y mome lymphoma cells is found to be dependent on the near-UV irradiation and to be much higher than that of the corresponding alcohol. Therefore the new type of photoinduced damage occurs inside cells. Intercalating photosensitizers with an attached hydroperoxide group might represent a novel and versatile class of DNA damaging agents, e.g. for phototherapy. KW - DNS-Schädigung Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-86870 ER - TY - JOUR A1 - Brixner, Tobias A1 - Koch, Federico A1 - Kullmann, Martin A1 - Selig, Ulrike A1 - Nuernberger, Patrick A1 - Götz, Daniel C. G. A1 - Bringmann, Gerhard T1 - Coherent two-dimensional electronic spectroscopy in the Soret band of a chiral porphyrin dimer JF - New Journal of Physics N2 - Using coherent two-dimensional (2D) electronic spectroscopy in fully noncollinear geometry, we observe the excitonic coupling of β,β'-linked bis[tetraphenylporphyrinato-zinc(II)] on an ultrafast timescale in the excited state. The results for two states in the Soret band originating from an excitonic splitting are explained by population transfer with approximately 100 fs from the energetically higher to the lower excitonic state. This interpretation is consistent with exemplary calculations of 2D spectra for a model four-level system with coupling. KW - optics KW - quantum optics KW - laser Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96139 ER - TY - THES A1 - Shao, Changzhun T1 - Programming Self-assembly: Formation of Discrete Perylene Bisimide Aggregates T1 - Steuerung der Selbstassemblierung: Aufbau der diskreten Perylenbisimid-Aggregaten N2 - The objective of this thesis focuses on the development of strategies for precise control of perylene bisimide (PBI) self-assembly and the in-depth elucidation of structural and optical features of discrete PBI aggregates by means of NMR and UV/Vis spectroscopy. The strategy for discrete dimer formation of PBIs is based on delicate steric control that distinguishes the two facets of the central perylene surface. The strategy applied in this thesis for accessing discrete PBI quadruple and further oligomeric stacks relies on backbone-directed PBI self-assembly. For this purpose, two tweezer-like PBI dyads bearing the respective rigid backbones, diphenylacetylene (DPA) and diphenylbutydiyne (DPB), were synthesized. The distinct aggregation behavior of these structurally similar PBI dyads can be ascribed to the intramolecular distance between the two PBI chromophores imparted by the DPA and DPB spacers. N2 - Das Ziel dieser Arbeit ist die Entwicklung von Strategien für die präzise Steuerung der PBI-Selbstorganisation sowie die gründliche Aufklärung der strukturellen und optischen Eigenschaften von diskreten PBI-Aggregaten mittels NMR- und UV/Vis-Spektroskopie. Die Strategie der diskreten Dimerbildung von PBIs ist auf der empfindlichen sterischen Kontrolle begründet, die eine Differenzierung der beiden Facetten der zentralen Perylenoberfläche ermöglicht. Um diskrete vierfache und höhere oligomere PBI-Stapel zu erhalten, behilft sich die vorliegende Arbeit der PBI-Selbstorganisation, die durch ein Rückgrat vermittelt wird. Zu diesem Zweck wurden zwei pinzettenartige PBI-Dyaden synthetisiert, die die starren Rückgrate Diphenylacetylen (DPA) bzw. Diphenylbutydiyn (DPB) tragen (Abbildung 2). Das unterschiedliche Aggregationsverhalten dieser strukturell ähnlichen PBI-Dyaden kann den verschiedenen intramolekularen Abständen der beiden PBI-Chromophore zugeschrieben werden, die durch DPA bzw. DPB als Abstandshalter vorgegeben werden. KW - Farbstoff KW - perylene bisimide KW - self-assembly KW - dimer KW - Perylenderivate KW - Selbstorganisation Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69298 ER - TY - THES A1 - Dürrbeck, Nina T1 - Photoinduced Charge-Transfer Processes in Redox Cascades based on Triarylamine Donors and the Perchlorinated Triphenylmethyl Radical Acceptor T1 - Photoinduzierte Ladungstransferprozesse in Redox-Kaskaden basierend auf Triarylamin-Donoren und dem perchlorierten Triphenylmethyl-Radikal-Akzeptor N2 - In this work, a series of redox cascades was synthesised and investigated in view of their photophysical and electrochemical properties. The cascades are based on a perchlorinated triphenylmethyl radical acceptor and two triarylamine donors. Absorption spectra showed the presence of charge-transfer bands in the NIR range of the spectra, which pointed to the population of a charge-transfer state between a triarylamine donor and the radical acceptor. A weak to moderate emission in the NIR range of the spectra was observed for all compounds in cyclohexane. Spectroelectrochemical measurements were used to investigate the characteristic spectral features of the oxidised and reduced species of all compounds. Transient absorption spectra in the ns- and fs-time regime revealed an additional hole transfer in the cascades between the triarylamine donors, resulting in a charge-separated state. Charge-separation and -recombination processes were found to be located in the ps-time regime. N2 - Im Rahmen dieser Arbeit wurde eine Reihe von Redox-Kaskaden synthetisiert und hinsichtlich ihrer spektroskopischen und elektrochemischen Eigenschaften untersucht. Die Kaskaden basieren auf einem perchlorierten Triphenylmethyl-Radikal-Akzeptor und zwei Triarylamin-Donoren. Absorptionsspektren zeigten das Vorhandensein von Ladungstransferbanden im NIR-Bereich des Spektrums, welche auf die Bevölkerung eines Ladungstransferzustands zwischen einem Triarylamin-Donor und dem perchlorierten Akzeptor hinweisen. Eine schwache bis mäßige Fluoreszenz ließ sich für alle Verbindungen in Cyclohexan im NIR-Bereich beobachten. Spektroelektrochemische Messungen kamen zur Untersuchung der oxidierten und reduzierten Spezies aller Verbindungen zum Einsatz. Transiente Absorption im ns- bis fs-Zeitbereich zeigte einen zusätzlichen Lochtransfer zwischen den Triarylaminen, welcher zur Ausbildung eines ladungsseparierten Zustands führte. Alle Ladungsseparierungs- und Rekombinationsprozesse fanden im ps-Bereich statt. KW - Ladungstransfer KW - Donator KW - Akzeptor KW - Redox-Kaskade KW - Transiente Absorption KW - charge transfer KW - redox cascade KW - acceptor KW - transient absorption KW - Donor Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-90078 ER - TY - THES A1 - Gsänger, Marcel T1 - Organic Thin-Film Transistors Based on Dipolar Squaraine Dyes T1 - Organische Dünnschichttransistoren von dipolaren Squarainfarbstoffen N2 - In summary, it can be stated that the herein studied set of acceptor-substituted squaraine dyes can be seen as potent candidates for OTFTs. Furthermore, their transistor performance can be easily tuned to obtain hole mobilities up to 0.45 cm2/Vs from solution and 1.3 cm2/Vs from sublimation by choosing adequate deposition techniques. In the end, a probable structural model derived from studies of the thin-film morphology by methods such as optical spectroscopy, AFM and X-ray even facilitated the clarification of the observed charge transport behavior. N2 - Zusammenfassend lässt sich sagen, dass die in dieser Arbeit untersuchten akzeptorsubstituierten Squarainfarbstoffe durchaus als leistungsfähige Kandidaten für den Einsatz in OTFT-Bauteilen angesehen werden können. Ihre Transistorleistung lässt sich durch geeignete Wahl der Abscheidungsmethode dahingehend einstellen, als dass sich Lochmobilitäten von bis zu 0.45 cm2/Vs mittels Lösungsprozessierung und von bis zu 1.3 cm2/Vs mittels Sublimation realisieren lassen. Schließlich ermöglichte die Untersuchung der Dünnfilmmorphologie mit Methoden wie der optischen Spektroskopie, Rasterkraftmikroskopie und Röntgenbeugung die Schlussfolgerung auf ein mutmaßliches Strukturmodell. KW - Organische Chemie KW - Squaraine KW - Organischer Feldeffekttransistor KW - Organic Chemistry KW - Squaraine KW - Organic Field-Effect Transistor KW - Organischer Halbleiter Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-80588 ER - TY - THES A1 - Paasche, Alexander T1 - Mechanistic Insights into SARS Coronavirus Main Protease by Computational Chemistry Methods T1 - Mechanistische Einblicke in die SARS Coronavirus Hauptprotease mit computerchemischen Methoden N2 - The SARS virus is the etiological agent of the severe acute respiratory syndrome, a deadly disease that caused more than 700 causalities in 2003. One of its viral proteins, the SARS coronavirus main protease, is considered as a potential drug target and represents an important model system for other coronaviruses. Despite extensive knowledge about this enzyme, it still lacks an effective anti-viral drug. Furthermore, it possesses some unusual features related to its active-site region. This work gives atomistic insights into the SARS coronavirus main protease and tries to reveal mechanistic aspects that control catalysis and inhibition. Thereby, it applies state-of-the-art computational methods to develop models for this enzyme that are capable to reproduce and interpreting the experimental observations. The theoretical investigations are elaborated over four main fields that assess the accuracy of the used methods, and employ them to understand the function of the active-site region, the inhibition mechanism, and the ligand binding. The testing of different quantum chemical methods reveals that their performance depends partly on the employed model. This can be a gas phase description, a continuum solvent model, or a hybrid QM/MM approach. The latter represents the preferred method for the atomistic modeling of biochemical reactions. A benchmarking uncovers some serious problems for semi-empirical methods when applied in proton transfer reactions. To understand substrate cleavage and inhibition of SARS coronavirus main protease, proton transfer reactions between the Cys/His catalytic dyad are calculated. Results show that the switching between neutral and zwitterionic state plays a central role for both mechanisms. It is demonstrated that this electrostatic trigger is remarkably influenced by substrate binding. Whereas the occupation of the active-site by the substrate leads to a fostered zwitterion formation, the inhibitor binding does not mimic this effect for the employed example. The underlying reason is related to the coverage of the active-site by the ligand, which gives new implications for rational improvements of inhibitors. More detailed insights into reversible and irreversible inhibition are derived from in silico screenings for the class of Michael acceptors that follow a conjugated addition reaction. From the comparison of several substitution patterns it becomes obvious that different inhibitor warheads follow different mechanisms. Nevertheless, the initial formation of a zwitterionic catalytic dyad is found as a common precondition for all inhibition reactions. Finally, non-covalent inhibitor binding is investigated for the case of SARS coranavirus main protease in complex with the inhibitor TS174. A novel workflow is developed that includes an interplay between theory and experiment in terms of molecular dynamic simulation, tabu search, and X-ray structure refinement. The results show that inhibitor binding is possible for multiple poses and stereoisomers of TS174. N2 - Das Schwere Akute Respiratorische Syndrom (SARS) wird durch eine Infektion mit dem SARS Virus ausgelöst, dessen weltweite Verbreitung 2003 zu über 700 Todesfällen führte. Die SARS Coronavirus Hauptprotease stellt ein mögliches Wirkstoffziel zur Behandlung dar und hat Modellcharakter für andere Coronaviren. Trotz intensiver Forschung sind bis heute keine effektiven Wirkstoffe gegen SARS verfügbar. Die vorliegende Arbeit gibt Einblicke in die mechanistischen Aspekte der Enzymkatalyse und Inhibierung der SARS Coronavirus Hauptprotease. Hierzu werden moderne computerchemische Methoden angewandt, die mittels atomistischer Modelle experimentelle Ergebnisse qualitativ reproduzieren und interpretieren können. Im Zuge der durchgeführten theoretischen Arbeiten wird zunächst eine Fehlereinschätzung der Methoden durchgeführt und diese nachfolgend auf Fragestellungen zur aktiven Tasche, dem Inhibierungsmechanismus und der Ligandenbindung angewandt. Die Einschätzung der quantenchemischen Methoden zeigt, dass deren Genauigkeit teilweise von der Umgebungsbeschreibung abhängt, welche als Gasphasen, Kontinuum, oder QM/MM Modell dargestellt werden kann. Letzteres gilt als Methode der Wahl für die atomistische Modellierung biochemischer Reaktionen. Die Vergleiche zeigen für semi-empirische Methoden gravierende Probleme bei der Beschreibung von Proton-Transfer Reaktionen auf. Diese wurden für die katalytische Cys/His Dyade betrachtet, um Einblicke in Substratspaltung und Inhibierung zu erhalten. Dem Wechsel zwischen neutralem und zwitterionischem Zustand konnte hierbei eine zentrale Bedeutung für beide Prozesse zugeordnet werden. Es zeigt sich, dass dieser „electrostatic trigger“ von der Substratbindung, nicht aber von der Inhibitorbindung beeinflusst wird. Folglich beschleunigt ausschließlich die Substratbindung die Zwitterionbildung, was im Zusammenhang mit der Abschirmung der aktiven Tasche durch den Liganden steht. Dies gibt Ansatzpunkte für die Verbesserung von Inhibitoren. Aus in silico screenings werden genauere Einblicke in die reversible und irreversible Inhibierung durch Michael-Akzeptor Verbindungen gewonnen. Es wird gezeigt, dass unterschiedlichen Substitutionsmustern unterschiedliche Reaktionsmechanismen in der konjugierten Additionsreaktion zugrunde liegen. Die vorangehende Bildung eines Cys-/His+ Zwitterions ist allerdings für alle Inhibierungsmechanismen eine notwendige Voraussetzung. Letztendlich wurde die nicht-kovalente Bindung eines Inhibitors am Beispiel des TS174-SARS Coronavirus Hauptprotease Komplexes untersucht. Im Zusammenspiel von Theorie und Experiment wurde ein Prozess, bestehend aus Molekulardynamik Simulation, Tabu Search und Röntgenstruktur Verfeinerung ausgearbeitet, der eine Interpretation der Bindungssituation von TS174 ermöglicht. Im Ergebnis zeigt sich, dass der Inhibitor gleichzeitig in mehreren Orientierungen, als auch in beiden stereoisomeren Formen im Komplex vorliegt. KW - SARS KW - Inhibitor KW - Enzym KW - Computational chemistry KW - Coronaviren KW - SARS KW - Protease KW - Mechanismus KW - Inhibitor KW - Computerchemie KW - SARS KW - protease KW - mechanism KW - inhibitor KW - computational chemistry Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-79029 ER - TY - JOUR A1 - Homann, Arne A1 - Timm, Malte A1 - Seibel, Jürgen T1 - Chemo-enzymatic synthesis and in vitro cytokine profiling of tailor-made oligofructosides N2 - Background It is well known that carbohydrates play fundamental roles in cell signaling and infection processes as well as tumor formation and progression. However, the interaction pathways and cellular receptors targeted by carbohydrates and glycoconjugates remain poorly examined and understood. This lack of research stems, at least to a major part, from accessibility problems of large, branched oligosaccharides. Results To test glycan - cell interactions in vitro, a variety of tailored oligosaccharides was synthesized chemo-enzymatically. Glycosyltransferases from the GRAS organisms Bacillus megaterium (SacB) and Aspergillus niger (Suc1) were used in this study. Substrate engineering of these glycosyltransferases generally acting on sucrose leads to the controlled formation of novel tailored di-, tri- and tetrasaccharides. Already industrially used as prebiotics in functional food, the immunogenic potential of novel oligosaccharides was characterized in this study. A differential secretion of CXCL8 and CCL2 was observed upon oligosaccharide co-cultivation with colorectal epithelial Caco-2 cells. Conclusion Pure carbohydrates are able to stimulate a cytokine response in human endothelial cells in vitro. The type and amount of cytokine secretion depends on the type of co-cultivated oligosaccharide. KW - Chemie KW - Oligofructoside KW - Glycosyltransferase KW - Suc1 KW - Aspergillus niger KW - SacB KW - Bacillus megaterium KW - CXCL8 (IL-8) KW - CCL2 (MCP-1) KW - Caco-2 Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-76393 ER - TY - THES A1 - Ojala, Antti T1 - Merocyanine Dyes as Donor Materials in Vacuum-Deposited Organic Solar Cells: Insights into Structure-Property-Performance Relationships N2 - In this study, a double-donor concept is used to improve the performance of thermally evaporated merocyanine(s)/C60 bulk heterojunction (BHJ) solar cells. It is shown that the co-evaporation of two merocyanine dyes with absorption bands at ~ 500 nm (SW dye) and ~ 650 nm (LW dye), respectively, together with C60 fullerene results in an improvement of open-circuit voltage (VOC), short-circuit current (JSC) as well as total power conversion efficiency (PCE) compared to the best single-donor cell. The enhancement of JSC is attributed to a higher photon harvesting efficiency of the mixed-donor devices due to a better spectral coverage. N2 - Im Rahmen dieser Arbeit wurden Struktur-Eigenschafts-Beziehungen zwischen der Festkörpermorphologie und der Leistung organischer Solarzellen auf der Basis von Merocyanin-Farbstoffen untersucht. Verschiedene analytische Methoden, vor allem optische Untersuchungen und Röntgenbeugung, wurden verwendet, um die Einkristall bzw. Dünnschichtstruktur der Merocyanine aufzuklären. Zusammenhänge zwischen der Festkörperstruktur der Farbstoffe und deren Leistung in Solarzellen wurden eindeutig nachgewiesen. In Kapitel 2 werden die Grundlagen der organischen Photovoltaik erläutert und ein Überblick über den Stand der Forschung auf dem Gebiet der durch Vakuumabscheidung von kleinen Molekülen hergestellten Solarzellen gegeben. Die Technologie der Vakuumverdampfung kleiner Moleküle hat sich in den letzten Jahren rasch weiterentwickelt und steht inzwischen an der Schwelle zur Kommerzialisierung erster Produkte. Vakuumabgeschiedene Solarzellen lassen sich mit hoher Reproduzierbarkeit herstellen und weisen gute Stabilitäten auf. Aus wissenschaftlicher Sicht ist vor allem die gute Verfügbarkeit zahlreicher Donoren und die einfache und exakte Realisierung verschiedenster Bauteilarchitekturen von Interesse. Im Kapitel 3 werden die in dieser Arbeit benutzten Architekturen für die Herstellung und Charakterisierung der Solarzellen vorgestellt und diskutiert. Kapitel 4 präsentiert eine umfassende Studie über die Kristallpackungen der dipolaren Merocyanin-Farbstoffe. Hier wurde vor allem die Wirkung der Dipol-Dipol-Wechselwirkungen auf die gefundenen Strukturmotive in den Kristallstrukturen der Merocyanin-Farbstoffe analysiert. Die statistischen Auswertung zeigt, dass bei einem hohen molekularen Dipolmoment (> 8 D) die Wahrscheinlichkeit für die Anordnung der Moleküle in einer zentrosymmetrischen Raumgruppen erhöht wird. Dimere mit einer antiparallelen Orientierung der Dipolmomente wurden häufig gefunden (Abbildung 1a). Eine detaillierte Untersuchung der Kristallstrukturen zahlreicher Merocyanine, in denen Fischerbase als Donor-Baustein in Kombination mit ... KW - Merocyanine KW - organische Solarzelle KW - Merocyanin KW - organische Photovoltaik KW - Merocyanine KW - organic photovoltaics Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70073 ER - TY - THES A1 - Bürckstümmer, Hannah T1 - Merocyanine dyes for solution-processed organic bulk heterojunction solar cells T1 - Merocyaninfarbstoffe für lösungsprozessierte organische bulk-heterojunction Solarzellen N2 - The technology of organic photovoltaics offers the possibility of low-cost devices due to easy fabrication procedures and low material consumption and at the same time high flexibility concerning the applied substrates or design features such as the color palette. Owing to these benefits, this research field is highly active, being reflected by the continuously rising number of publications. Chapter 1 gives an extensive overview of a part of these reports, namely the field of solution-processed BHJ organic solar cells using small molecules as electron-donating materials. In the early years of this research area (2006-2008), well known hole transporting materials such as triphenylamine based chromophores, oligothiophenes and polyaromatic hydrocarbons were applied. However, many of these dyes lacked absorption at longer wavelengths and were therefore limited in their light harvesting qualities. Later, chromophores based on low band gap systems consisting of electron-donating and electron-accepting units showing internal charge transfer overcame this handicap. Today, donor-substituted diketopyrrolopyrroles (D-A-D chromophores), squaraines (D-A-D chromophores) and acceptor substituted oligothiophenes (A-D-A chromophores) are among the most promising dyes for small molecule based organic solar cells with PCEs of 4-5%. This work is based on the findings of the groups of Würthner and Meerholz, which tested merocyanine dyes for the first time in organic BHJ solar cells.4 According to the Bässler theory85, the high dipolarity of these dyes should hamper the charge transport, but the obtained first results with PCE of 1.7% proved the potenital of this class of dyes for this application. Merocyanine dyes offer the advantages of facile synthesis and purification, high tinctorial strength and monodispersity. Additionally, the electronic structure of the dyes, namely the absorption as well as the electrochemical properties, can be adjusted by using the right combination of donor and acceptor units. For these reasons, this class of dye is highly interesting for the application in organic solar cells. It was the aim of the thesis to build more knowledge about the potential and limitations of merocyanines in BHJ photovoltaic devices. By screening a variety of donor and acceptor groups a comprehensive data set both for the molecular materials as well as for the respective solar devices was generated and analyzed. As one focus, the arrangement of the chromophores in the solid state was investigated to gain insight about the packing in the solar cells and its relevance for the performance of the latter. To do so, X-ray single crystal analyses were performed for selected molecules. By means of correlations between molecular properties and the characteristics of the corresponding solar cells, several design rules to generate efficient chromophores for organic photovoltaics were developed. The different donor and acceptor moieties applied in this work are depicted in the following ... N2 - Die Technologie der organischen Photovoltaik eröffnet die Chance, kostengünstige Solarzellen herzustellen, da einfache Produktionstechniken genutzt werden können und nur geringe Materialmengen benötigt werden. Gleichzeitig bietet sie hohe Flexibilität bezüglich des Designs, sowohl was die eingesetzten Substrate als auch die gewünschte Farbpalette betrifft. Aufgrund dieser Vorteile ist der Forschungsbereich der organischen Solarzellen hochaktuell, was sich auch in der stetig wachsenden Zahl an Publikationen widerspiegelt. Kapitel 1 bietet einen umfassenden Literaturüberblick über den Bereich der lösungs-prozessierten organischen BHJ Solarzellen basierend auf niedermolekularen Materialien. In den frühen Jahren dieses Forschungsbereiches (2006-2008) wurden hauptsächlich altbekannte organische Lochleitermaterialien wie triphenylaminbasierte Moleküle, Oligothiophene oder polyaromatische Hydrocarbonverbindungen eingesetzt. Viele dieser Verbindungen zeigten jedoch Defizite betreffend der Absorption, da sie nur bei relativ kurzen Wellenlängen absorbierten und dadurch nur einen Bruchteil des eingestrahlten Sonnenlichts nutzen konnten. Später wurde dieser Nachteil durch sogenannte „low band gap“ Systeme, welche elektronengebenden und elektronenziehenden Einheiten aufweisen, oder durch Kombinationen der klassischen elektronenreichen Lochleiter mit Akzeptoreinheiten überwunden. Zu den vielversprechendsten Verbindungsklassen für die Anwendung in lösungsprozessierten niedermolekularen organischen Solarzellen gehören heute Donor-substituierte Diketopyrrolopyrrole (D-A-D Chromophor), Quadratsäurederivate (D-A-D Chromophor) und Akzeptor-substituierte Oligothiophene (A-D-A Chromophor), deren beste Vertreter Wirkungsgrade von 4-5% erzielen. Die vorliegende Arbeit basiert auf den Erkenntnissen der Arbeitsgruppen Würthner und Meerholz, die als erste Merocyaninfarbstoffe in organischen BHJ Solarzellen untersuchten.4 Gemäß der Bässler-Theorie85 sollte das hohe Grundzustandsdipolmoment dieser Verbindungen den Ladungsträgertransport erheblich behindern. Die erhaltenen, vielversprechenden Wirkungsgrade von 1.7% beim ersten Materialscreenin zeigen jedoch die Eignung dieser Fabstoffklasse für organische Solarzellen. Merocyanine bieten einige Vorteile: sie lassen sich einfach herstellen und aufreinigen, zeigen hohe Farbstärken und sind monodisperse Verbindungen. Zudem lässt sich der elektronische Charakter der Chromophore, also die Absorptions- und elektrochemischen Eigenschaften nahezu beliebig verändern, indem man die passende Donor-Akzeptor Kombination wählt. Deshalb ist diese Farbstoffklasse für die Applikation der organischen Solarzellen hochinteressant. Ziel dieser Doktorarbeit war es, ein tieferes Verständnis über das Potential und mögliche Beschränkungen von Merocyaninen in organische Solarzellen zu erlangen. Durch Untersuchung einer Reihe von Donor- und Akzeptoreinheiten wurde ein umfassender Datensatz generiert und analysiert, welcher sowohl die molekularen Materialien als auch die entsprechenden Solarzellen beinhaltet. Die Anordnung der Chromophore im Festkörper wurde bei ausgewählten Farbstoffen mittels Einkristall-Röntgenstrukturanalyse untersucht, um Erkenntnisse über das Packungsverhalten der Moleküle in den Solarzellen und dessen Relevanz für die Leistungsfähigkeit der Zellen zu gewinnen. Anhand von Korrelationen zwischen den molekularen Eigenschaften und den Kennzahlen der entsprechenden Solarzellen wurden mehrere Richtlinien zur Entwicklung von effizienten Chromophoren für organische Solarzellen abgeleitet. Die in dieser Arbeit eingesetzten Akzeptor- und Donoreinheiten sind im Folgenden abgebildet ... KW - organische Solarzelle KW - Merocyanine KW - organische Solarzellen KW - Merocyanin KW - organic solar cells KW - merocyanine dye Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66879 ER - TY - THES A1 - Beer, Meike Vanessa T1 - Correlation of ligand density with cell behavior on bioactive hydrogel layers T1 - Korrelation der Ligandendichte mit Zellverhalten auf bioaktivierten Hydrogelschichten N2 - Diese Arbeit beschäftigte sich mit der Quantifizierung von Zelladhäsion vermittelnden Liganden in und auf dünnen Hydrogelschichten, die zur Oberflächenmodifizierung auf Biomaterialien aufgebracht wurden. Das bereits etablierte und gut charakterisierte inerte NCO-sP(EO-stat-PO) Hydrogelsystem, das eine einfache und reproduzierbare Bioaktivierung mit Peptiden erlaubt, wurde als Basis für diese Arbeit verwendet. Diese Hydrogele können auf zwei Weisen funktionalisiert werden. Liganden können entweder mit der Prepolymerlösung vor der Beschichtung gemischt (Einmischmethode) oder frische Hydrogelschichten mit einer Ligandenlösung inkubiert werden (Inkubationsmethode). Der erste Teil dieser in drei Hauptteile unterteilten Arbeit, beschäftigte sich mit der Konzentrationsbestimmung der Liganden in der gesamten Tiefe der Hydrogelschicht, während sich der zweite Teil auf die oberflächensensitive Quantifizierung von Zelladhäsion vermittelnden Molekülen an der biologischen Grenzfläche konzentrierte. Die Ergebnisse wurden mit Zelladhäsionskinetiken verglichen. Der dritte Teil dieser Arbeit beschäftigte sich mit der biochemischen als auch strukturellen Nachahmung der komplexen Extrazellulärmatrix (ECM). Das ECM Protein Fibronektin (FN) wurde über Zucker-Lektin Anbindung präsentiert und Zellverhalten auf diesen biomimetischen Oberflächen untersucht. Ebenfalls wurde Zellverhalten in einer dreidimensionalen Faserumgebung mit identischer Oberflächenchemie wie in den beiden ersten Teilen dieser Arbeit untersucht und mit der Peptidkonzentration korreliert. Insgesamt, war die Hauptfragestellung in dieser Arbeit ‘Wie viel?’, d.h. einerseits die Ermittlung der maximalen, als auch der für Zelladhäsion optimalen Ligandendichte. Im ersten praktischen Teil der vorliegenden Arbeit (Klassische Quantifizierung) wurden Liganden in der gesamten Hydrogelschicht, als auch speziell in oberen Bereichen der Schichten quantifiziert. Die Untersuchung der Hydrogelschichten in Wellplatten und auf Glas funktionalisiert mit GRGDS und 125I-YRGDS erfolgte in Kapitel 3 mittels Radioaktivmessung. Wurden Hydrogelschichten mittels Inkubationsmethode funktionalisiert, konnte eine Sättigung mit Liganden bei etwa 600 µg/mL ermittelt werden. Mittels Einmischmethode funktionalisierte Hydrogele erreichten keine maximale Ligandenkonzentration in den Schichten, mit dem Verhältnis 2/1 als maximales verwendetes Verhältnis. Höhere Liganden zu Prepolymer Verhältnisse als 2/1 wurden jedoch nicht verwendet, um eine ausreichende Vernetzung der Hydrogele nicht zu gefährden. Zur Detektion mittels Röntgenphotoelektronenspektroskopie (XPS) und Flugzeit-Sekundärionen-Massen-spektrometrie (TOF-SIMS) (Kapitel 4) wurden eine fluorierte Aminosäure und ein iodiertes Peptid mit den Prepolymeren in molaren Verhältnissen von 1/2, 1/1 und 2/1 gemischt. Beide Methoden ermittelten eine maximale Ligandenkonzentration bei Verhältnissen von 1/1. Zusätzliche Liganden (2/1) führten zu keiner vermehrten Anbindung. Wesentlich im Zusammenhang mit der Ligandenquantifizierung auf Biomaterialien ist, diese an der Oberfläche, die für Zellen zugänglich ist, durchzuführen. Im zweiten Teil dieser Arbeit (Oberflächensensitive Quantifizierung) kamen daher Methoden zum Einsatz, die Liganden ausschließlich auf der Oberfläche quantifizierten. Zur Detektion mit Oberflächenplasmon-resonanz (SPR) und akustischer Oberflächenwellentechnologie (SAW) in Kapitel 5 musste die Standardbeschichtung der Hydrogele von Glas und Silikon auf Cystamin funktionalisierte Goldoberflächen übertragen werden. Mittels Ellipsometrie und Rasterkraftmikroskopie (AFM) konnte nur eine dünne und inhomogene Hydrogelbeschichtung nachgewiesen werden. Dennoch zeigten SPR und SAW die Unterbindung von Serum und Streptavidin (SA) Adsorption auf nicht funktionalisierten Schichten, jedoch eine spezifische und konzentrationsabhängige SA Bindung auf Hydrogelschichten, die mit Biocytin und GRGDSK-biotin funktionalisiert wurden. Die Ligandenquantifizierung mittels Enzymgekoppeltem Immunadsorptionstest (ELISA) und Enzymgekoppelten Lektinadsorptionstest (ELLA) (Kapitel 6) wurde auf Hydrogelschichten in Wellplatten und auf Glas angewendet, die mit verschiedenen Liganden mittels Inkubation und Einmischung funktionalisiert wurden. Das Modellmolekül Biocytin, das biotinylierte Peptid GRGDSK-biotin, das ECM Protein Fibronektin (FN), als auch die Modellzucker N-Acetyl-glukosamin (GlcNAc) und N-Acetyllaktosamin (LacNAc) konnten spezifisch in verschiedenen Konzentrationen nachgewiesen werden. Beispielhaft seien hier Schichten auf Glas genannt, die mittels Einmischmethode mit GRGDSK-biotin funktionalisiert wurden, da diese zum Vergleich in Kapitel 8 herangezogen wurden. Auf diesen Oberflächen wurde eine maximale Peptidkonzentration auf der Oberfläche bei einem Peptid zu Prepolymer Verhältnis von 1/5 ermittelt. Neben diesen verschiedenen Quantifzierungsmethoden ist die in vitro Analyse mit Zellen nicht zu vernachlässigen (Kapitel 7). Hierzu wurden Hydrogele auf Glas aufgebracht und mit GRGDS mittels Einmischmethode funktionalisiert. Durch Zählen adhärenter primärer humaner dermaler Fibroblasten (HDF) auf Mikroskopbildern wurde eine maximale Zelladhäsion bei dem Peptid zu Prepolymer Verhältnis von 1/5 festgestellt. Hingegen wurde ein Verhältnis von 1/2 für optimale Zelladhäsion ermittelt, wenn Zellen zur Quantifizierung von den Hydrogelen abgelöst und im CASY® Zellzähler quantifiziert wurden. Zusätzlich wurde die Zellvitalität durch Messung intrazellulärer Enzymaktivitäten gemessen, jedoch konnte kein Zusammenhang zwischen Zellvitalität und GRGDS Konzentration hergestellt werden. Adhärente HDFs waren in allen Fällen vital, unabhängig von der Ligandenkonzentration auf der Oberfläche. Auch die Mausfibroblasten Zelllinie NIH L929 wurde auf Hydrogelen mit verschiedenen GRGDS zu Prepolymer Verhältnissen durch Zählen adhärenter Zellen auf Mikroskopbildern untersucht. Diese im Verhältnis zu HDFs wesentlich kleineren Mauszellen benötigten höhere GRGDS Konzentrationen (2/1) für maximale Zelladhäsion. Nach der Ligandenquantifizierung in Kapitel 3 bis 7, wurden diese Ergebnisse in Kapitel 8 miteinander verglichen. Hierzu wurden Messungen auf Hydrogelschichten verwendet, die mittels Einmischmethode funktionalisiert wurden. Während die Quantifizierung mittels Radioaktivmessung in der gesamten Tiefe der Hydrogelschichten keine maximale Ligandenkonzentration ermitteln konnte, war in den oberen Bereichen der Schicht ein Maximum an Liganden bei 1/1 festzustellen (XPS, TOF-SIMS). SPR und SAW wurden zum Vergleich nicht herangezogen, da die Beschichtung auf Gold erst optimiert werden muss. Oberflächensensitive Quantifizierung mittels ELISA und Zelladhäsion, die lediglich die sterisch zugänglichen Liganden auf einer Oberfläche nachweisen, ergaben übereinstimmend eine optimale Ligandenkonzentration für SA Bindung und Zelladhäsion bei einem Peptid zu Prepolymer Verhältnis von 1/5. Dies unterstreicht, wie wichtig der Vergleich der Methoden, als auch die Verwendung von oberflächensensitiven Methoden ist. Der dritten Teil dieser Arbeit beschäftigte sich mit der biochemischen und strukturellen Nachahmung der komplexen extrazellulären Umgebung (Advanced ECM engineering), ein wichtiger Aspekt in der Biomaterialforschung, da zum größten Teil zwei-dimensionale Biomaterialien zum Einsatz kommen, die direkt mit Liganden kovalent funktionalisiert werden. Die ECM ist jedoch um ein Vielfaches komplexer und die bestmögliche Nachahmung ist Voraussetzung für eine bessere Akzeptanz durch Zellen und Gewebe. In Kapitel 9 wurde eine Möglichkeit aufgezeigt, das ECM Protein FN nicht-kovalent über Zucker-Lektinbindungen zu immobilisieren. Ein Schichtaufbau von Hydrogel, dem darauf durch Mikrokontakt-druckverfahren (MCP) kovalent gebundenen Zucker Poly-N-Acetyllaktosamin (polyLacNAc) und den darauf nicht-kovalent gebundenen Galektin His6CGL2 und FN, konnte mit Fluoreszenzfärbung elegant nachgewiesen werden. Optimale Konzentrationen für den Schichtaufbau wurden mittels ELLA/ELISA auf Hydrogelschichten ermittelt, die durch Inkubation mit dem Zucker funktionalisiert wurden. Nur der komplette Schichtaufbau konnte zufriedenstellende HDF Adhäsion vermitteln und im Vergleich zu Zellkulturpolystyrol (TCPS) Oberflächen konnten HDFs auf dem biomimetischen Schichtaufbau schneller adhärieren und spreiten. Zudem wurde die Umorganisierung von auf Glas adsorbiertem FN, auf NCO-sP(EO-stat-PO) kovalent gebundenem FN und biomimetisch über polyLAcNAc-His6CGL2 gebundenem FN durch HDFs verglichen. Nur auf den biomimetischen Oberflächen schien eine Umorganisation durch die Zellen möglich, wie sie auch in der ECM zu finden ist. Diese biomimetische und flexible Präsentation eines Proteins erwies sich als vielversprechende Möglichkeit eine biomimetischere Oberfläche für Zellen zu schaffen, die eine optimale Biokompatibilität ermöglichen könnte. Auch die strukturelle Nachahmung der ECM ist eine vielversprechende Strategie zum Nachbau der ECM. In Kapitel 10 wurde ein Einschrittverfahren zur Herstellung synthetischer, bioaktiver und degradierbarer Faserkonstrukte durch Elektrospinnen zur Nachahmung der ECM präsentiert. In diesem System wurden durch Zugabe von NCO-sP(EO-stat-PO) als reaktives Additiv zu Poly(D,L-laktid-co-Glycolid) (PLGA) Fasern hergestellt, die mit einer ultradünnen, inerten Hydrogelschicht versehen waren. Es konnte gezeigt werden, dass durch die Verwendung von NCO-sP(EO-stat-PO) als Additiv die Adsorption von Rinderserumalbumin (BSA) im Vergleich zu PLGA um 99,2% reduziert, die Adhäsion von HDFs verhindert und die Adhäsion von humanen mesenchymalen Stammzellen (MSC) minimiert werden konnten. Spezifische Bioaktivierung wurde durch Zugabe von Peptidsequenzen zur Spinlösung erreicht, welche kovalent in die Hydrogelschicht eingebunden werden konnten und kontrollierte Zell-Faser Interaktionen ermöglichten, Um die spezifische Zelladhäsion an solchen inerten Fasern zu erzielen, wurde GRGDS kovalent auf der Faseroberfläche gebunden. Dies erfolgte durch Zugabe des Peptids zur Polymerlösung vor dem Elektrospinnen. Als Negativkontrolle wurde die Peptidsequenz GRGES an die Faseroberfläche gebunden, welche durch Zellen nicht erkannt wird. Während die Verhinderung unspezifischer Proteinadsorption für die Peptidmodifizierten Fasern erhalten blieb, konnten HDFs lediglich auf den mit GRGDS Peptid modifizierten Fasern adhärieren, proliferieren und nach zwei Wochen eine konfluente Zellschicht aus vitalen Zellen bilden. Zusätzlich konnten MSCs auf GRGDS funktionalisierten Fasern adhärieren. Liganden konnten auf Fasern quantifiziert werden, indem die ELISA Technik aus Kapitel 6 auf Faseroberflächen transferiert wurde. Um das Potential der biochemischen und strukturellen Nachbildung der ECM aufzuzeigen, wurden beide Ansätze miteinander kombiniert. Die Immobilisierung von polyLacNAc auf die Hydrogelfasern durch Inkubation und der Schichtaufbau mit His6CGL2 und FN resultierte in HDF Adhäsion. N2 - This thesis concerned the quantification of cell adhesion molecules (CAM) in and on thin hydrogel films as surface modification of biomaterials. The established and well characterized, per se inert NCO-sP(EO-stat-PO) hydrogel system which allows the easy and reproducible bioactivation with peptides was used as basis for this thesis. Two methods can be used to functionalize the coatings. Ligands can either be mixed into the prepolymer solution in prior to layer formation (mix-in method), or freshly prepared coatings can be incubated with ligand solution (incubation method). Divided into three major parts, the first part of the thesis dealt with the concentration of ligands in the bulk hydrogel, whereas the second part of the thesis focused on the surface sensitive quantification of CAMs at the biointerface. The results were correlated with cell adhesion kinetics. The third part of this thesis investigated the biochemical and the structural mimicry of the extracellular matrix (ECM). ECM proteins were presented via sugar-lectin mediated binding and cell behavior on these surfaces was analyzed. Cell behavior on three-dimensional fibers with identical surface chemistry as the coatings in the previous sections of the thesis was analyzed and correlated with the amount of peptide used for bioactivation. Overall, the main question of this work was ‘How much?’ regarding maximal as well as optimal ligand concentrations for controlled cell-hydrogel interactions. The focus in the first practical part of this thesis was to analyze the amount of ligands in NCO-sP(EO-stat-PO) hydrogels using classical quantification methods. Coatings in 96-well plates as well as on glass were functionalized with GRGDS and 125I-YRGDS for radioisotopic detection (Chapter 3). Using the incubation method for functionalization, a maximal ligand binding using peptide concentrations of 600 µg/mL could be determined. When functionalization was introduced via the mix-in method, a clear tendency for higher ligand concentrations with increasing ligand to prepolymer ratio was observed, but no maximal ligand binding could be detected with a ligand to prepolymer ratio of 2/1 being the highest ratio investigated. This ratio of 2/1 was not exceeded to ensure that complete crosslinking of the hydrogel was not affected. In Chapter 4, a fluorinated amino acid and an iodinated peptide were immobilized to the hydrogels using the mix-in method and were detected by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). In these measurements, maximal ligand binding was detected for a ligand to prepolymer ratio of 1/1. Higher ligand to prepolymer ratios did not result in any significant increase in ligand concentrations in the surface near regions of the crosslinked hydrogels. To address the question of how many ligands were actually accessible for cell interaction at the interface, surface sensitive quantification methods were applied in the second part of this thesis. For the quantification with surface plasmon resonance (SPR) and surface acoustic wave technology (SAW) (Chapter 5), the hydrogel coating procedure needed to be transferred onto cystamine functionalized gold surfaces. Characterization with ellipsometry and atomic force microscopy (AFM) revealed inhomogeneous cystamine binding to the activated surfaces, which resulted in inhomogeneous coatings. Nevertheless, it could be shown that SPR as well as SAW were suitable methods for the surface sensitive quantification of the ligand concentration on NCO-sP(EO-stat-PO) hydrogels. Non-functionalized coatings resisted non-specific serum as well as streptavidin (SA) adsorption. Coatings functionalized with biocytin and GRGDSK-biotin introduced specific SA binding that was dependent on the biotin concentration at the surface. Additionally, enzyme linked immunosorbent assay (ELISA) and enzyme linked lectin assay (ELLA) (Chapter 6) were applied to coatings in 96-well plates and on glass. Coatings were functionalized with the model molecule biocytin, the biotinylated peptide GRGDSK-biotin, the ECM protein fibronectin (FN), as well as the carbohydrates N-acetylglucosamine (GlcNAc) and N-acetyllactosamine (LacNAc). All ligands could be successfully detected with antibodies or SA via ELISA or ELLA. Maximal GRGDSK-biotin binding to the hydrogel coatings on glass was achieved at a peptide to prepolymer ratio of 1/5, which was used as reference value in Chapter 8. Last but not least, cell adhesion (Chapter 7) was quantified depending on the GRGDS concentration on hydrogel coatings on glass. Maximal adhesion of primary human dermal fibroblast (HDF) was observed at GRGDS to prepolymer ratios of 1/5, when adherent cells were counted on life cell images. Quantification of adherent cells using the CASY® cell counter revealed maximal HDF adhesion at molar ligand to prepolymer ratios of 1/2. However, cell vitality detected by intracellular enzyme activities was not dependent on the GRGDS concentration. Cells which managed to adhere were vital regardless of the amount of ligands present. Additionally, adhesion of fibroblasts from the murine cell line NIH L929 was analyzed by counting on life cell images. These cells, being much smaller than the HDF cells, needed higher GRGDS to prepolymer ratios (2/1) for proper cell adhesion. All quantification methods applied to analyze hydrogels which were functionalized by the mix-in method in Chapter 3, 4, 6 and 7, were compared in Chapter 8. Radiodetection gave information about the ligand concentrations throughout the whole hydrogel and no maximal amount of ligands could be detected when increasing the peptide to prepolymer ratio. In contrast, XPS and TOF-SIMS which only penetrated the surface near regions of the coating, a maximal ligand binding to the hydrogel was detected for 1/1 ratios. SPR and SAW were not included in this comparison, as the coatings on gold need to be optimized first. The two surface sensitive quantification methods (ELISA and HDF adhesion) could give information about the quantity of peptide which was sterically available for SA or cell binding. With these methods, maximal SA and cell binding was detected at ratios of 1/5. These results underline the importance of carefully compare the different methods. Beside ligand quantification on hydrogels, the third part of this thesis was concerned with the biochemical and structural mimicry of the ECM by advanced ECM engineering to design biomimetic biomaterials that are better accepted by cells and tissue. The subject of Chapter 9 was the biomimetic and flexible presentation of the ECM protein FN. FN was attached via sugar-lectin mediated binding to NCO-sP(EO-stat-PO) hydrogels. The build-up of the covalently immobilized sugar poly-N-acetyllactosamine (polyLacNAc), the subsequent non-covalent binding of the fungal galectin His6CGL2, and FN could be elegantly proven by fluorescent staining on coatings which were functionalized with the sugar by micro contact printing (MCP). Further experiments were carried out on build-ups, where polyLacNAc was immobilized on the hydrogel by incubation. Optimal parameters for the layer build-up were determined by ELLA/ELISA. Only the complete build-up induced proper adhesion of HDFs. Compared to tissue culture polystyrene (TCPS), cells adhered and spread faster on the biomimetic surfaces. The flexible presentation of FN allowed HDFs to rearrange homogenously immobilized FN into fibrillar structures, which seemed not to be possible when FN was adsorbed on glass or covalently bound directly to the hydrogel coatings. This new approach of a flexible and biomimetic presentation of an ECM protein allows new ways to design biomaterials with best possible cell-material interactions. The work described in Chapter 10 focused on the structural mimicry of the fibrous ECM structures by electrospinning of synthetic, bioactive, and degradable fibers. Poly(D,L-lactide-co-glycolide) (PLGA) and NCO-sP(EO-stat-PO) were electrospun out of one solution in an easy one-step preparation resulting in fibers with an ultrathin inert hydrogel layer at the surface. By adding GRGDS to the solution prior to electrospinning, specifically interacting fibers could be obtained. In comparison to PLGA, the adsorption of bovine serum albumin (BSA) could be reduced by 99.2%. As a control, the non-active peptide GRGES was immobilized to the fiber. These fibers did not allow cell adhesion, showing that the integrity of the hydrogel coated fibers was not affected by the immobilization of peptides. HDF adhesion was obtained by functionalization with GRGDS, leading to the adhesion, spreading, and proliferation of HDFs. Also mesenchymal stem cells (MSC) could adhere to GRGDS functionalized fibers. Additionally, for ligand quantification, the ELISA technique was successfully transferred to fiber substrates. To highlight the potential of the approaches for the biochemical and structural mimicry of the ECM, the sugar polyLacNAc was immobilized on the PLGA/sP(EO-stat-PO) fibers followed by the subsequent layer build-up with His6CGL2 and FN. These fibers triggered HDF adhesion. KW - Hydrogel KW - Biomaterial KW - Zelladhäsion KW - Adsorption KW - Ligand KW - Quantifizierung KW - Proteinadsorption KW - Funktionalisierung KW - protein adsorption Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-74454 ER - TY - JOUR A1 - Cecil, Alexander A1 - Rikanovic, Carina A1 - Ohlsen, Knut A1 - Liang, Chunguang A1 - Bernhardt, Jorg A1 - Oelschlaeger, Tobias A. A1 - Gulder, Tanja A1 - Bringmann, Gerd A1 - Holzgrabe, Ulrike A1 - Unger, Matthias A1 - Dandekar, Thomas T1 - Modeling antibiotic and cytotoxic effects of the dimeric isoquinoline IQ-143 on metabolism and its regulation in Staphylococcus aureus, Staphylococcus epidermidis and human cells N2 - Background: Xenobiotics represent an environmental stress and as such are a source for antibiotics, including the isoquinoline (IQ) compound IQ-143. Here, we demonstrate the utility of complementary analysis of both host and pathogen datasets in assessing bacterial adaptation to IQ-143, a synthetic analog of the novel type N,C-coupled naphthyl-isoquinoline alkaloid ancisheynine. Results: Metabolite measurements, gene expression data and functional assays were combined with metabolic modeling to assess the effects of IQ-143 on Staphylococcus aureus, Staphylococcus epidermidis and human cell lines, as a potential paradigm for novel antibiotics. Genome annotation and PCR validation identified novel enzymes in the primary metabolism of staphylococci. Gene expression response analysis and metabolic modeling demonstrated the adaptation of enzymes to IQ-143, including those not affected by significant gene expression changes. At lower concentrations, IQ-143 was bacteriostatic, and at higher concentrations bactericidal, while the analysis suggested that the mode of action was a direct interference in nucleotide and energy metabolism. Experiments in human cell lines supported the conclusions from pathway modeling and found that IQ-143 had low cytotoxicity. Conclusions: The data suggest that IQ-143 is a promising lead compound for antibiotic therapy against staphylococci. The combination of gene expression and metabolite analyses with in silico modeling of metabolite pathways allowed us to study metabolic adaptations in detail and can be used for the evaluation of metabolic effects of other xenobiotics. KW - Staphylococcus aureus Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-68802 ER - TY - THES A1 - Berberich, Martin T1 - Rylene Bisimide-Diarylethene Photochromic Systems for Non-Destructive Memory Read-out T1 - Photochrome Rylenbisimid-Diarylethen-Systeme für Nichtdestruktives Datenspeicherauslesen N2 - Diese Doktorarbeit zeigt deutlich verbesserte aus Rylenbisimiden und Diarylethenen aufgebaute, photochrome Systeme für das nicht-destruktive Auslesen von Fluoreszenz. Dabei wird die Fluoreszenz der Emittereinheit durch photoinduzierten Elektronentransfer nur zu einer isomeren Form des Photochromes gelöscht. Die Triebkraft für den Fluoreszenz-löschenden Elektronentransfer wurde mittels Rehm-Weller-Gleichung berechnet. Die erhaltenen Systeme erfüllen die notwendigen Anforderungen für ein nicht-destruktives Auslesen in einem auf Schreiben, Auslesen und Löschen basierenden fluoreszierenden Datenspeicher. N2 - The thesis enhances the strategy of non-destructive fluorescence read-out in rylene bisimide-diarylethene containing photochromic systems. The fluorescence of the emitter unit is quenched by a photoinduced electron transfer only to one of the isomeric forms of the photochrome. The driving force of the fuorescence-quenching electron transfer was calculated by the help of the Rehm-Weller equation. The novel photochromic systems satisfy the necessary requirements for non-destructive read-out in write/read/erase fluorescent memory devices. KW - Photochromie KW - Elektronentransfer KW - Fluoreszenz KW - Perylenderivate KW - Terrylenderivate KW - Diarylethylene KW - Speicher KW - Perylenbisimid KW - Terrylenbisimid KW - Diarylethen KW - Perylene bisimide KW - Terrylene bisimide KW - Diarylethene Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73517 ER - TY - THES A1 - Qamar, Riaz-ul T1 - Synthesis of functionalized molecular probes for bioorthogonal metabolic glycoengineering T1 - Synthese von funktionalisierten molekularen Strukturen für metabolisch bioorthogonales Glycoengineering N2 - Biomolecules are difficult to investigate in their native environment. The vast complexity of cellular systems and seldom availability of chemical reactions compatible with the physiological milieu make it a challenging task. Bioorthogonal chemical reactions serve as a key to achieve selective ligation, whose components must react rapidly and selectively with each other under physiological conditions in the presence of the plethora of functionalities necessary to sustain life. In this dissertation, we focused on the synthesis of chemical reporters and probe molecules for bioorthogonal labeling through click reaction. Initially, sialic acid derivatives with a linker containing terminal alkyne functionality were synthesized. After the synthesis of azide derivatives of fluorescent dyes as counter partners, they were conjugated with sialic acids through Cu(I) catalyzed alkyne azide cycloaddition (CuAAC). The successful in vitro conjugation of Sia and fluorescent dyes was followed by metabolic tagging of human larynx carcinoma (HEp-2) and the carcinoma of Chinese hamster ovary (CHO­K1) with alkynated Sia that were subsequently ligated with fluorescein azide. Finally, the stained cells were subjected to fluorescent microscopy to obtain their images. To enable the click reaction compatible to in vivo applications, the reactivity of cyclooctyne was enhanced by two different approaches. In a first approach, following the Bertozzi’s strategy, two fluorine atoms were introduced adjacent to the alkyne to lower the LUMO. In a second strategy the ring strain of cyclooctyne was attempted to be enhanced by the introduction of an amide group. In addition, glutarimide derivatives with free amino and carboxylic acid functional groups were synthesized by domino-Michael addition-cyclization-reaction. N2 - Biomoleküle sind schwer in ihrer natürlichen Umgebung zu untersuchen. Die enorme Komplexizität zellulärer Systeme und die geringe Verfügbarkeit von chemischen Reaktionen, welche mit physiologischen Bedingungen kompatibel sind, stellen eine große Herausforderung dar. Bioorthogonale Reaktionen dienen hierbei als Schlüssel für eine selektive Ligation, bei der die Komponenten schnell, selektiv und unter genannten Bedingungen miteinander reagieren. Der Fokus dieser Dissertation lag auf der Synthese von chemischen Reportermolekülen, welche für bioorthogonale Markierungsversuche mithilfe einer Klick-Reaktion eingesetzt werden können. Dafür wurden zunächst Derivate der Sialinsäure mit einem Linker, der eine endständige Alkinfunktion trägt, synthetisiert und diese mit ebenfalls in dieser Arbeit dargestellten Azidofluoreszenzfarbstoffen in einer Cu(I)-katalysierten Alkin-Azid-Cycloaddition (CuAAC) konjugiert. Nach erfolgreicher in vitro Durchführung wurden Zellen des menschlichen Larynx Karzinoms (HEp-2) und Zellen des Ovariumkarzinoms des chinesischen Hamsters metabolisch mit alkinfunktionalisierten Sialinsäuren markiert und anschließend mit Fluoresceinazid ligiert. Fluoreszenzmikroskopie an diesen Zellen demonstrierte den erfolgreichen Einbau der Sialinderivate. Um die Klickreaktion verträglicher für in vivo Anwendungen zu gestalten, wurde versucht die Reaktivität des Cyclooctin durch zwei verschiedene Herangehensweisen zu erhöhen. Zum einen wurden nach Strategie von Bertozzi zwei Fluoratome benachbart zur Alkingruppe eingeführt, um die LUMO-Energie zu erniedrigen. Zum anderen wurde versucht die Ringspannung des Cyclooctin durch Einführung einer Amidgruppe zu erhöhen. Neben dem Klickprojekt wurden in dieser Arbeit außerdem Glutarimidderivate mit freien Amino- und Carbonsäuregruppen über eine Domino-Michael-Additions-Zyklisierungsreaktion dargestellt. KW - Click-Chemie KW - Acetylneuraminsäure KW - Cyclooctine KW - Ringschlussmetathese KW - Michael-Addition KW - Bioorthogonal KW - Glycoengineering KW - Sialinsäuren KW - Molecular probes KW - Bioorthogonal KW - Glycoengineering KW - Sialic acids KW - Cyclooctyne KW - Ring closing metathesis KW - Michael addition Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73378 ER - TY - THES A1 - Zhang, Guoliang T1 - Phytochemical Research on Two Ancistrocladus Species, Semi-Synthesis of Dimeric Naphthylisoquinoline Alkaloids, and Structure Optimization of Antitumoral Naphthoquinones T1 - Phytochemische Untersuchungen an zwei Ancistrocladus-Arten, Semi-Synthese dimerer Naphthylisochinolin-Alkaloide und Strukturoptimierung von antitumoralen Naphthochinonen N2 - Plant-derived natural products and their analogs continue to play an important role in the discovery of new drugs for the treatment of human diseases. Potentially promising representatives of secondary metabolites are the naphthylisoquinoline alkaloids, which show a broad range of activities against protozoan pathogens, such as plasmodia, leishmania, and trypanosoma. Due to the increasing resistance of those pathogens against current therapies, highly potent novel agents are still urgently needed. Thus, it is worthy to discover new naphthylisoquinoline alkaloids hopefully with pronounced bioactivities by isolation from plants or by synthesis. The naphthylisoquinoline alkaloids are biosynthetically related to another class of plant-derived products, the naphthoquinones, some of which have been recently found to display excellent anti-multiple myeloma activities without showing any cytotoxicities on normal blood cells. Multiple myeloma still remains incurable, although remissions may be induced with co-opted therapeutic treatments. Therefore, more potent naphthoquinones are urgently required, and can be obtained by isolation from plants or by synthesis. In detail, the results in this thesis are listed as follows: 1) Isolation and characterization of naphthylisoquinoline alkaloids from the stems of a Chinese Ancistrocladus tectorius species. Nine new naphthylisoquinoline alkaloids, named ancistectorine A1 (60), N-methylancistectorine A1 (61), ancistectorine A2 (62a), 5-epi-ancistectorine A2 (62b), 4'-O-demethylancistectorine A2 (63), ancistectorine A3 (64), ancistectorine B1 (65), ancistectorine C1 (66), and 5-epi-ancistrolikokine D (67) were isolated from the Chinese A. tectorius and fully characterized by chemical, spectroscopic, and chiroptical methods. Furthermore, the in vitro anti-infectious activities of 60-62 and 63-66 have been tested. Three of the metabolites, 61, 62a, and 62b, exhibited strong antiplasmodial activities against the strain K1 of P. falciparum without showing significant cytotoxicities. With IC50 values of 0.08, 0.07, and 0.03 μM, respectively, they were 37 times more active than the standard chloroquine (IC50 = 0.26 μM). Moreover, these three compounds displayed high antiplasmodial selectivity indexes ranging from 100 to 3300. According to the TDR/WHO guidelines, they could be considered as lead compounds. In addition, seven alkaloids, 69-74 (structures not shown here), were isolated from A. tectorius that were known, but new to the plant, together with another fourteen known compounds (of these, only the structures of the three main alkaloids, 5a, 5b, and 78 are shown here), which had been previously found in the plant. The three metabolites ancistrocladine (5a), hamatine (5b), and (+)-ancistrocline (78) were found to show no or moderate activities against the MM cell lines. 2) Isolation and characterization of naphthylisoquinoline alkaloids from the root bark of a new, botanically yet undescribed Congolese Ancistrocladus species. An unprecedented dimeric Dioncophyllaceae-type naphthylisoquinoline alkaloid, jozimine A2 (84), as first recognized by G. Bauckmann from an as yet undescribed Ancistrocladus species, was purified and characterized as part of this thesis. Its full structural assignment was achieved by spectroscopic and chiroptical methods, and further confirmed by an X-ray diffraction analysis, which had never succeeded for any other dimeric naphthylisoquinoline alkaloids before. Structurally, the dimer is composed of two identical 4'-O-demethyldioncophylline A halves, coupled through a sterically hindered central axis at C-3',3'' of the two naphthalene moieties. Pharmacologically, jozimine A2 (84) showed an extraordinary antiplasmodial activity (IC50 = 1.4 nM) against the strain NF54 of P. falciparum. Beside jozimine A2 (85), another new alkaloid, 6-O-demethylancistrobrevine C (84), and four known ones, ancistrocladine (5a), hamatine (5b), ancistrobrevine C (86), and dioncophylline A (6) were isolated from the Ancistrocladus species, the latter in a large quantity (~500 mg), showing that the plant produces Ancistrocladaceae-type, mixed-Ancistrocladaceae/Dioncophyllaceae-type, and Dioncophyllaceae-type naphthyl- isoquinoline alkaloids. Remarkably, it is one of the very few plants, like A. abbreviatus, and A. barteri, that simultaneously contain typical representatives of all the above three classes of alkaloids. 3) Semi-synthesis of jozimine A2 (85), 3'-epi-85, jozimine A3 (93) and other alkaloids from dioncophylline A (6). The dimeric naphthylisoquinoline alkaloids, jozimine A2 (85) and 3'-epi-85, constitute rewarding synthetic targets for a comparative analysis of their antiplasmodial activities and for a further confirmation of the assigned absolute configurations of the isolated natural product of 85. They were semi-synthesized in a four-step reaction sequence from dioncophylline A (6) in cooperation with T. Büttner. The key step was a biomimetic phenol-oxidative dimerization at C-3' of the N,O-dibenzylated derivative of 89 by utilizing Pb(OAc)4. This is the first time that the synthesis of such an extremely sterically hindered (four ortho-substituents) naphthylisoquinoline alkaloid – with three consecutive biaryl axes! – has been successfully achieved. A novel dimeric naphthylisoquinoline, jozimine A3 (93), bearing a 6',6''-central biaryl axis, was semi-synthesized from 5'-O-demethyldioncophylline A (90) by a similar biomimetic phenol-oxidative coupling reaction as a key step, by employing Ag2O. HPLC analysis with synthetic reference material of 3'-epi-85 and 93 for co-elution revealed that these two alkaloids clearly are not present in the crude extract of the Ancistrocladus species from which jozimine A2 (85) was isolated. This evidences that jozimine A2 (85) is very specifically biosynthesized by the plant with a high regio- and stereoslectivity. Remarkably, the two synthetic novel dimeric naphthylisoquinoline alkaloids 3'-epi-85 and 93 were found to display very good antiplasmodial activities, albeit weaker than that of the natural and semi-synthetic product 85. Additionally, the two compounds 3'-epi-85 and 93 possessed high or moderate selectivity indexes, which were much lower than that of 85. However, they can still be considered as new lead structures. Two unprecedented oxidative products of dioncophylline A, the diastereomeric dioncotetralones A (94a) and B (94b), were synthesized from dioncophylline A (6) in a one-step reaction. Remarkably, the aromatic properties in the “naphthalene” and the “isoquinoline” rings of 94a and 94b are partially lost and the “biaryl” axis has become a C,C-double bond, so that the two halves are nearly co-planar to each other, which has never been found among any natural or synthetic naphthylisoquinoline alkaloid. Their full structural characterization was accomplished by spectroscopic methods and quantum-chemical CD calculations (done by Y. Hemberger). The presumed reaction mechanism was proposed in this thesis. In addition, one of the two compounds, 94a, exhibited a highly antiplasmodial activity (IC50 = 0.09 μM) with low cytotoxicity, and thus, can be considered as a new promising lead structure. Its 2'-epi-isomer, 94b, was inactive, evidencing a significant effect of chirality on the bioactivity. Of a number of naphthylisoquinoline alkaloids tested against the multiple-myeloma cell lines, the three compounds, dioncophylline A (6), 4'-O-demethyldioncophylline A (89), and 5'-O-demethyldioncophylline A (90) showed excellent activities, even much stronger than dioncoquinones B (10), C (102), the epoxide 175, or the standard drug melphalan. 4) Isolation and characterization of bioactive naphthoquinones from cell cultures of Triphyophyllum peltatum. Three new naphthoquinones, dioncoquinones C (102), D (103), and E (104), the known 8-hydroxydroserone (105), which is new to this plant, and one new naphthol dimer, triphoquinol A (107), were isolated from cell cultures of T. peltatum in cooperation with A. Irmer. Dioncoquinone C (102) showed an excellent activity against the MM cells, very similar to that of the previously found dioncoquinone B (10), without showing any inhibitory effect on normal cells. The other three naphthoquinones, 103105, were inactive or only weakly active. 5) Establishment of a new strategy for a synthetic access to dioncoquinones B (10) and C (102) on a large scale for in vivo experiments and for the synthesis of their analogs for first SAR studies. Before the synthesis of dioncoquinone B (10) described in this thesis, two synthetic pathways had previously been established in our group. The third approach described here involved the preparation of the joint synthetic intermediate 42 with the previous two routes. The tertiary benzamide 135 was ortho-deprotonated by using s-BuLi/TMEDA, followed by transmetallation with MgBr2▪2Et2O, and reaction with 2-methylallyl bromide (139). It resulted in the formation of ortho-allyl benzamide 140, which was cyclized by using methyl lithium to afford the naphthol 42. This strategy proved to be the best among the established three approaches with regard to its very low number of steps and high yields. By starting with 136, this third strategy yielded the related bioactive natural product, dioncoquinone C (102), which was accessed by total synthesis for the first time. To identify the pharmacophore of the antitumoral naphthoquinones, a library of dioncoquinone B (10) and C (102) analogs were synthesized for in vitro testing. Among the numerous naphthoquinones tested, the synthetic 7-O-demethyldioncoquinone C (or 7-O-hydroxyldioncoquinone B) (145), constitutes another promising basic structure to develop a new anti-MM agent. Furthermore, preliminary SAR results evidence that the three hydroxy functions at C-3, C-5, and C-6 are essential for the biological properties as exemplarily shown through the compounds 10, 102, and 145. All other mixed OH/OMe- or completely OMe-substituted structures were entirely inactive. By a serendipity the expoxide 175 was found to display the best anti-MM activity of all the tested isolated metabolites from T. peltatum, the synthesized naphthoquinones, and their synthetic intermediates. Toxic effects of 175 on normal cells were not observed, in contrast to the high toxicities of all other epoxides. Thus, the anti-MM activity of 175 is of high selectivity. The preliminary SAR studies revealed that the 6-OMe group in 175 is required, thus differed with the above described naphthoquinones (where 6-OH is a requisite in 10, 102, and 145), which evidenced potentially different modes of action for these two classes of compounds. 6) The first attempted total synthesis of the new naturally occurring triphoquinone (187a), which was recently isolated from the root cultures of T. peltatum in our group. A novel naphthoquinone-naphthalene dimer, 187a (structure shown in Chapter 10), was isolated in small quantities from the root cultures of T. peltatum. Thus, its total synthesis was attempted for obtaining sufficient amounts for selected biotestings. The key step was planned to prepare the extremely sterically hindered (four ortho-substituents) binaphthalene 188 by a coupling reaction between the two 2-methylnaphthalene derivatives. Test reactions involving a system of two simplified 2-methylnaphthylboron species and 2-methylnaphthyl bromide proved the Buchwald ligand as most promising. The optimized conditions were then applied to the two true - highly oxygenated - coupling substrates, between the 2-methylnaphthylboron derivatives 210, 211, 213, or 214 and the 2-methylnaphthyl iodides (or bromides) 215 (206), 215 (206), 212 (205), or 212 (205), respectively. Unfortunately, this crucial step failed although various bases and solvent systems were tested. This could be due to the high electron density of the two coupling substrates, both bearing strongly OMOM/OMe-donating function groups. Therefore, a more powerful catalyst system or an alternative synthetic strategy must be explored for the total synthesis of 187a. 7) Phytochemical investigation of the Streptomyces strain RV-15 derived from a marine sponge. Cyclodysidins A-D (216-219), four new cyclic lipopeptides with a- and ß-amino acids, were isolated from the Streptomyces strain RV15 derived from a marine sponge by Dr. U. Abdelmohsen. Their structures were established as cyclo-(ß-AFA-Ser-Gln-Asn-Tyr-Asn-Ser-Thr) by spectroscopic analysis using 2D NMR techniques and CID-MS/MS in the course of this thesis. In conclusion, the present work contributes to the discovery of novel antiplasmodial naphthylisoquinoline alkaloids and antitumoral naphthoquinones, which will pave the way for future studies on these two classes of compounds. N2 - Naturstoffe pflanzlichen Ursprungs und deren Derivate waren seit jeher eine wichtige Quelle für die Entdeckung neuer Arzneistoffe. Darunter stellen die Naphthylisochinolin-Alkaloide eine besonders bedeutsame Klasse an Sekundärmetaboliten dar, die gegen eine breite Vielfalt an pathogenen Protozoen, wie z.B. Plasmodien, Leishmanien und Trypanosomen, aktiv sind. Die zunehmende Resistenz dieser Krankheitserreger gegen vorhandene Therapeutika macht die Erschließung neuer hochwirksamer Substanzen – durch direkte Isolierung aus Pflanzenmaterial oder chemische Synthese – zu einer lohnenswerten Aufgabe. Kürzlich wurde entdeckt, dass Naphthochinone, eine biosynthetisch eng mit den Naphthylisochinolin-Alkaloiden verwandte Naturstoffklasse, exzellente Aktivitäten gegen das Multiple Myelom aufweist. Diese Krebserkrankung ist mit gegenwärtigen Arzneimitteln nicht heilbar, wenngleich unterstützende Therapeutika zu einer Remission führen können. Die Suche nach pharmakologisch wirksamen Naphthochinonen, mittels Isolierung aus Pflanzen oder durch chemische Synthese, ist daher dringend geboten. Die Ergebnisse dieser Arbeit umfassen im Detail die folgenden Teilbereiche: 1) Isolierung diverser Naphthylisochinolin-Alkaloide aus dem Stamm der chinesischen Ancistrocladus tectorius Spezies. Es Wurch neun neue Naphthylisochinlin-Alkaloide aus der in China beheimateten Pflanze A. tectorius. Diese umfassten die sechs 5,1'-gekuppelten Verbindungen Ancistectorin A1 (60), N-Methylancistectorin A1 (61), Ancistectorin A2 (62a), 5-epi-Ancistectorin A2 (62b), 4'-O-Demethylancistectorin A2 (63), Ancistectorin A3 (64), das 7,1'-gekuppelte Ancistectorin B1 (65), das 7,8'-verknüpfte Ancistectorin C1 (66), sowie das 5,8'-verknüpfte 5-epi-Ancistrolikokin D (65) die allesamt vollständig charakterisiert und auf ihre antiplasmodiale Aktivität untersucht wurden. Drei dieser Metabolite, 61, 62a, und 62b, zeigten eine starke antiplasmodiale Aktivität gegen den Stamm K1 von P. falciparum und dennoch keine signifikante Cytotoxizität. Mit IC50-Werten von 0.08, 0.07 und 0.03 μM waren sie 37 mal aktiver als der Standard Chloroquin (IC50 = 0.26 μM). Darüber hinaus verfügten diese drei Verbindungen über einen hohen antiplasmodialen Index von 100 bis 300. Laut WHO-Richtlinien können diese erfolgversprechenden Antimalaria-Wirkstoffe als neue Leitstrukturen angesehen werden. Des Weiteren wurden sieben bekannte Alkaloide, 69-74 (nicht abgebildet), erstmals aus A. tectorius isoliert. 14 weitere, aus dieser Pflanze bereits bekannte, Verbindungen (z.B. 5a, 5b, und 78) wurden ebenfalls gefunden. Die drei Hauptalkaloide Ancistrocladin (5a), Hamatin (5b) und (+)-Ancistroclin (78) hatten jedoch keine bzw. nur mäßige Aktivitäten gegen MM-Zelllinien. 2) Isolierung der Naphthylisochinolin-Alkaloide aus der Stammrinde einer neuen und botanisch noch unbeschriebenen, kongolesichen Ancistrocladus Spezies. Ein beispielloses dimeres Naphthylisochinolin-Alkaloid aus der Klasse der Dioncophyllaceae, Jozimin A2 (85), wurde aus einer bis dahin noch nicht beschriebenen Ancistrocladus Spezies in Zusammenarbeit mit G. Bauckmann isoliert. Mithilfe von spektroskopischen und chiroptischen Methoden erfolgte die vollständige Strukturaufklärung. Zum ersten Mal bei einem dimeren Naphthylisochinolin-Alkaloid wurde darüber hinaus dessen Struktur mittels Röntgenstrukturanalyse verifiziert. Die Struktur weist zwei identische miteinander verknüpfte 4'-O-Demethyldioncophyllin A Hälften auf, die in den Naphthalin-Einheiten an C-3' und C-3'' sterisch so stark gehindert sind, dass eine dritte rotationsstabile – und daher chirale – Achse vorliegt. Jozimin A2 (85) ragt pharmakologisch betrachtet durch die beste bis dahin gemessene antiplasmodiale Aktivität (IC50 = 1.4 nM, P. falciparum NF54) aller natürlichen monomeren und dimeren Naphthylisochinoline heraus. Neben Jozimin A2 (85) wurde ein weiteres neues Alkaloid, 6-O-Demethylancistrobrevin C (84), und die vier bekannten Monomere Ancistrocladin (5a), Hamatin (5b), Dioncophyllin A (6), und Ancistrobrevin C (86) aus dieser Ancistrocladus Spezies isoliert. Man konnte zeigen, dass die Pflanze Naphthylisochinolin-Alkaloide vom Ancistrocladaceae Typ, vom gemischten Ancistrocladaceae/Dioncophyllaceae Typ und vom Dioncophyllaceae Typ produziert. Dies ist umso bemerkenswerter, als dass nur wenige Pflanzen wie A. abbreviatus und A. barteri bekannt sind, die typische Vertreter aller drei Alkaloid-Klassen beinhalten. 3) Semi-Synthese des dimeren Naphthylisochinolin-Alkaloids Jozimine A2 (85) und seiner Derivate. Aufgrund seiner exzellenten antiplasmodialen Aktivität stellte das Naphthylisochinolin-Alkaloid Jozimin A2 (85), eine lohneswerte Zielstruktur für eine Synthese dar. Die Verbindung wurde durch Semisynthese in vier Stufen aus Dioncophyllin A (6) in Zusammenarbeit mit T. Büttner erschlossen. Als Schlüsselschritt erwies sich die biomimetische, oxidative Kupplung von 89 an C-3’ unter Verwendung von Pb(OAc)4. Der Aufbau einer solch sterisch gehinderten, zentralen Achse mit vier ortho-Substituenten wurde zum ersten Mal an Naphthylisochinolin-Alkaloiden erfolgreich durchgeführt. Zusammen mit Jozimin A2 (85) erhielt man sein 3',3''-Atropisomer 3'-epi-85. Parallel dazu wurde Jozimine A3 (93) dargestellt, dessen 6',6''-Zentral-Achse ebenfalls ausgehend von Dioncophyllin A (6) in einer Schlüsselsequenz mittels Ag2O aufgebaut wurde. HPLC-Coelutionsexperimente der synthetisch erhaltenen Verbindungen 3'-epi-85 und 93 zeigten zweifelsfrei, dass die beiden Alkaloide nicht im Rohextrakt der bisher unbestimmten Ancistrocladus-Art, aus welcher Jozimin A2 (85) isoliert wurde, vorhanden waren. Die Biosynthese von 85 erfolgt in der Pflanze offensichtlich mit hoher Spezifität. Die neuen synthetisch hergestellten, dimeren Naphthylisochinolin-Alkaloide 3'-epi-85 und 93 zeigten sehr gute, wenn auch im Vergleich zum natürlichen und semi-synthetisch erhaltenen 85 schwächere, antiplasmodiale Aktivitäten. Desweiteren besitzen die beiden Verbindungen 3'-epi-85 und 93 hohe bzw. moderate Selektivitäts-Indices, welche allerdings weit unter dem Wert von 85 liegen. Nichtsdestotrotz können sie als neue Leitstrukturen betrachtet werden. Im Verlauf der Synthese von Jozimin A2-Derivaten wurden des weiteren die zwei unbekannten Diastereoisomere, Dioncophynon A (94a) and B (94b), synthetisiert. Man erhielt diese in einer Stufe aus Dioncophyllin A (6). Die Strukturen von 94a und 94b zeichneten sich durch einen partiellen Verlust der Aromatizität am Naphthalin-Ring und eine C,C-Doppelbindung an der früheren Biarylachse aus. Die gefundenen Strukturmotive waren bis dahin weder von natürlichen noch von synthetischen Naphthylisochinolinen bekannt. Die vollständige Charakterisierung gelang durch spektroskopische Methoden und quantenchemische CD-Berechnungen (Y. Hemberger). Ein möglicher Mechanismus zur Bildung dieser Moleküle wurde ebenfalls in dieser Arbeit vorgestellt. Darüber hinaus zeigte eine dieser Verbindungen, 94a, eine hohe antiplasmodiale Aktivität (IC50 = 0.09 μM) bei gleichzeitig nur geringer Toxizität und konnte daher als vielversprechende Leitstruktur betrachtet werden. Dagegen war 94b inaktiv, was den signifikanten Effekt stereogener Elemente auf die Bioaktivität unterstrich. Aus einer ganzen Reihe von Naphthylisochinolin-Alkaloiden, die bzgl. ihrer Aktivität gegen das Multiple Myelom getestet wurden, zeigten v.a. drei Verbindungen, nämlich Dioncophyllin A (6), 4'-O-Demethyldioncophyllin A (89) und 5'-O-Demethyldioncophyllin A (90), exzellente Wirksamkeiten und übertrafen dabei sogar die Dioncochinone B (10) und C (102), das Epoxid 175 und die Referenzsubstanz Melphalan. 4) Isolierung der bioaktiven Naphthochinone aus Zellkulturen von Triphyophyllum peltatum. Drei neue Dioncochinone C (102), D (103) und E (104), das für diese Pflanze noch unbekannte 8-Hydroxydroseron (105) und ein neues Naphthalin-Dimer 107 wurden aus Zellkulturen von T. peltatum in Kooperation mit A. Irmer isoliert. Dioncochinon C (102) wies eine ausgezeichnete Aktivität gegen MM-Zellen, ähnlich zu der von Dioncochinon B, auf, wobei jedoch kein inhibierender Effekt auf normale Zellen beobachtet wurde. Die anderen drei Naphthochinone 103105 waren inaktiv oder nur sehr schwach aktiv gegenüber MM-Zellen. 5) Etablierung neuer Strategien für einen Zugang zu den Dioncochinonen B und C im großen Maßstab für In-vivo-Biotests sowie Synthese von Dioncochinon B-Analoga für SAR-Untersuchungen. Vor Beginn dieser Arbeiten zur Synthese von Dioncochinon B (10) existierten bereits zwei, in unserem Arbeitskreis erschlossene, Synthesewege. Die hier beschriebene dritte Möglichkeit zur Darstellung von Dioncochinon B (10) etablierte einen neuen Zugang zu dem gemeinsamen Intermediat 42. Man ortho-deprotonierte zunächst das tertiäre Amid 135 mit sec-BuLiTMEDA, führte anschließend eine Transmetallierung mit MgBr2▪2Et2O durch und setzte das Intermediat mit 2-Methylallylbromid (139) zum ortho-Allylbenzamid 140 um, welches schließlich mit Methyllithium zum Naphthol 42 zyklisiert wurde. Diese Strategie war den beiden früheren Ansätzen hinsichtlich der hohen Ausbeute und der geringen Anzahl an Synthesestufen überlegen. Darauf aufbauend gelang die erste Totalsynthese des bioaktiven Naturstoffes Dioncochinon C (102). Zur Untersuchung der Struktur-Wirkungs-Beziehung und zur Identifizierung des Pharmakophors der antitumoralen Naphthochinone wurden ca. 30 Analoga von Dioncochinon B (10) und C (102) synthetisiert und auf ihre Anti-MM-Wirkung getestet. Unter den zahlreichen dabei untersuchten Derivaten stellte die synthetische Verbindung 7-O-Demethyldioncochinon C (oder 7-O-Hydroxyldioncochinon B) (145) eine weitere vielversprechende Leitstruktur für die Entwicklung neuer Anti-MM-Kandidaten dar. Als besonders bemerkenswert erwiesen sich die antitumoralen Eigenschaften der Verbindungen 10, 102, und 145. Diese besitzen drei Hydroxygruppen an C-3, C-5 und C-6, die für Ihre biologischen Eigenschaften essentiell zu sein scheinen, da alle anderen Strukturen mit einem gemischten OH/OMe-Muster und jene vollständig OMe-substituierten Verbindungen inaktiv waren. Das Expoxid 175, zeigte unter allen natürlich vorkommenden als auch synthetischen Naphthochinonen und deren Derivaten die beste Aktivität gegen das Multiple Myelom. Gleichzeitig wurde keine Toxizität gegenüber normalen Zellen festgestellt. Dies stand im Gegensatz zu anderen Epoxiden, die über recht hohe Toxizitäten verfügten, wenngleich bei sehr guten Anti-MM-Aktivitäten. Umso bemerkenswerter ist die hohe Selektivität von 175 gegenüber Multiple-Myelom-Zellen. Einleitende SAR Studien zu 175 zeigten, dass die O-Me-Gruppe unbedingt erforderlich ist. Dies lässt auf einen von den Naphthochinonen 10, 102 und 145 verschiedenen Wirkmechanismus schließen, da die drei genannten Verbindungen an C-6 eine OH-Funktionalität tragen. 6) Die erste Totalsynthese eines neuen natürlichen Dimers aus T. peltatum, bestehend aus einer Naphthalin- und einer 1,2-Naphthochinon-Einheit. Man isolierte nur in Spuren ein neuartiges Naphthochinon-Naphthalin-Dimer 187a aus Wurzelkulturen von T. peltatum. Die Totalsynthese von 187a sollte deshalb ausreichende Mengen für ausgewählte Biotests verfügbar machen. Den Schlüsselschritt stellte die Kupplung von zwei sterisch sehr stark gehinderten 2-Methylnaphthalin-Ringen mit jeweils zwei ortho-Substituenten dar. Die Kupplung der 2-Methylnaphthylboronsäure -Derivate mit 2-Methylnaphthylbromid führte unter Verwendung des von Buchwald entwickelten Liganden 196, Pd2(dba)3 und geeigneten Lösungsmitteln und Basen zum racemischen Produkt. Die für das oben beschriebene System optimierten Bedingungen wurden auf die beiden genuinen – hoch-oxygenierten – Substrate die 2-Methylnaphthyl boronsäure-Derivate 210, 211, 213, oder 214 und 2-Methylnaphthyliodide (oder -bromide) 215 (206), 215 (206), 212 (205) oder 212 (205) angewandt. Leider führten zahlreiche Versuche unter Erprobung diverser Basen- und Lösungsmittelsysteme nicht zum Erfolg. Eine mögliche Erklärung liegt in der hohen Elektronendichte der beiden Kupplungspartner, die von den zwei bzw. drei Sauerstoffsubstituenten herrührt. Eine alternative Synthesestrategie oder der Einsatz eines leistungsfähigeren Katalysatorsystems muss deshalb zur Totalsynthese von 187a in Erwägung gezogen werden. 7) Phytochemische Untersuchung des marinen Streptomyces-Stammes RV-15 aus Schwämmen. Die vier neuen cyclischen Lipopeptide Cyclodysidin A-D (216219), welche sowohl aus - als auch - Aminosäuren aufgebaut sind, wurden aus RV-15, einem Streptomyces- Stamm, der mit Schwämmen vergesellschaft ist, isoliert. In Zusammenarbeit mit Dr. U. Abdelmohsen identifizierte man deren Struktur als Cyclo-(ß-AFA-Ser-Gln-Asn-Tyr-Asn- Ser-Thr) mithilfe von 2D-NMR-Spektroskopie und CID-MS/MS. KW - Ancistrocladus KW - dimerer Naphthylisochinolin-Alkaloide KW - Naphthochinonen KW - Ancistrocladus KW - Dimeric Naphthylisoquinoline Alkaloids KW - Naphthoquinones Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72734 ER - TY - JOUR A1 - Pratihar, Pampa A1 - Ghosh, Suhrit A1 - Stepanenko, Vladimir A1 - Patwardhan, Sameer A1 - Grozema, Ferdinand C. A1 - Siebbeles, Laurens D. A. A1 - Würthner, Frank T1 - Self-assembly and semiconductivity of an oligothiophene supergelator N2 - A bis(trialkoxybenzamide)-functionalized quaterthiophene derivative was synthesized and its self-assembly properties in solution were studied. In non-polar solvents such as cyclohexane, this quaterthiophene π-system formed fibril aggregates with an H-type molecular arrangement due to synergistic effect of hydrogen bonding and π-stacking. The self-assembled fibres were found to gelate numerous organic solvents of diverse polarity. The charge transport ability of such elongated fibres of quaterthiophene π-system was explored by the pulse radiolysis time resolved microwave conductivity (PR-TRMC) technique and moderate mobility values were obtained. Furthermore, initial AFM and UV-vis spectroscopic studies of a mixture of our electron-rich quaterthiophene derivative with the electron acceptor [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) revealed a nanoscale segregated assembly of the individual building blocks in the blend. KW - Organische Chemie KW - charge transport; hydrogen bonding; oligothiophene; organogel; self-assembly Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-67817 ER - TY - JOUR A1 - Homann, Arne A1 - Qamar, Riaz-ul A1 - Serim, Sevnur A1 - Dersch, Petra A1 - Seibel, Juergen T1 - Bioorthogonal metabolic glycoengineering of human larynx carcinoma (HEp-2) cells targeting sialic acid N2 - Sialic acids are located at the termini of mammalian cell-surface glycostructures, which participate in essential interaction processes including adhesion of pathogens prior to infection and immunogenicity. Here we present the synthesis and bioorthogonal metabolic incorporation of the sialic acid analogue N-(1-oxohex-5-ynyl)neuraminic acid (Neu5Hex) into the cell-surface glycocalyx of a human larynx carcinoma cell line (HEp-2) and its fluorescence labelling by click chemistry. KW - Organische Chemie KW - bioorthogonal metabolic glycoengineering; click chemistry; sialic acid Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-67806 ER - TY - THES A1 - Schmidt, Ralf T1 - Hamilton-Receptor-Mediated Self-Assembly of Merocyanine Dyes into Supramolecular Polymers T1 - Hamilton-Rezeptor-vermittelte Selbstorganisation von Merocyaninfarbstoffen zu supramolekularen Polymeren N2 - Die Selbstorganisation von Merocyaninfarbstoffen zu supramolekularen Polymeren wurde untersucht. Dabei konnte die Anordnung der hoch dipolaren Farbstoffe durch die Verwendung von verschiedenen Kombinationen von Wasserstoffbrückenbindungsmotiven und dipolarer Aggregation der Chromophore gesteuert. N2 - The self-assembly of merocyanine dyes into supramolecular polymers has been studied. Thereby, the spacial arrangement of the highly dipolar dyes has been controled by employing different combinations of hydrogen bonding motifs and dipolar aggregation of the chromophores. KW - Selbstorganisation KW - Merocyanine KW - Polymere KW - Supramolekulare Struktur KW - Organische Chemie KW - cooperativity KW - dipolar aggregation KW - dyes/pigments KW - hydrogen bond KW - self-assembly Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56265 ER - TY - JOUR A1 - Christl, Manfred A1 - Brüntrup, Gisela T1 - Diimine Reduction and Ozonolysis of Benzvalene N2 - Via reduction of benzvalene (1) with diirnine tricyclo[3.1.0.02•6]hexane is obtained in good yield. The procedure renders 3, which has already been synthesized by Lemal and Shim, accessible much easier and in larger quantities. IH and 13C n.m.r. spectroscopic data are discussed. Both the thermal and the AgBF4-catalyzed rearrangernent of 3 yield 1,3-cyclohexadiene (8). - The ozonolysis of 1 with subsequent LiAIH4-reduction results in cis-I,3- bis(hydroxyrnethyl)cyclobutane (13a). N2 - Durch Reduktion von Benzvalen (1) mit Diimin wird das Tricyc1o[3.1.0.02•6]hexan (3) in guter Ausbeute erhalten. Das Verfahren macht das bereits von Lemal und Shim dargestellte 3 erheblich leichter und in größeren Mengen zugänglich. IH- und 13C-NMR-spektroskopische Daten werden diskutiert. Sowohl die thermische als auch die AgBF4-katalysierte Umlagerung von 3 führt zu 1,3-Cyclohexadien (8). - Die Ozonolyse von 1 mit anschließender LiAlH4-Reduktion ergibt das cis-l,3-Bis(hydroxymethyl)cyclobutan (13a). KW - Organische Chemie Y1 - 1974 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57953 ER - TY - THES A1 - Safont Sempere, Marina Montserrat T1 - Chiral self-sorting of atropo-enantiomeric perylene bisimide dyes T1 - Chirale Self-sortierung von Atropo-enantiomerische Perilene Bisimide Farbstofe N2 - This thesis included the synthesis of conformationally stable chiral perylene bisimide (PBI) dyes, the study of their optical properties in solution and their chiral self-sorting behaviour in nonpolar solvents in which dimerization via pi-pi-stacking takes place. Furthermore, the influence of PBI core chirality on the properties of these dyes in the condensed state has been also studied. We have demonstrated and quantified the prevalence of chiral self-recognition over self-discrimination in pi-stacking dimerization of PBIs. It has been shown that this self-recognition event is compromised by the increasing flexibility of the structures related to the size of the OEG bridging units. Moreover, the inherent chirality of these PBIs has been proven to strongly influence their condensed state properties, for which large differences between the pure enantiomers and the racemates were revealed, as well as between the different bridged macrocyclic PBIs. N2 - Das Ziel der vorliegenden Arbeit war die Synthese von konformationsstabilen chiralen Perylenbisimidfarbstoffen (PBI), die Bestimmung ihrer optischen Eigenschaften in Lösung und ihrer chiralen Selbstsortierung in unpolaren Lösungsmitteln, in denen Dimerisierung durch pi-pi-Stapelung stattfindet. Des Weiteren wurde noch der Einfluss der PBI Kernchiralität auf die flüssigkristallinen Eigenschaften untersucht. Zusammenfassend konnte im Rahmen dieser Arbeit die Bevorzugung der chiralen Selbst-Erkennung gegenüber der Selbst-Diskriminierung in pi-gestapelten dimerisierten PBIs quantifiziert und bewiesen werden. Eine erhöhte Flexibilität der Moleküle durch Verlängerung der OEG Brückeneinheiten verringert jedoch die Qualität dieses Selbsterkennungsvorgangs. Des Weiteren hat die Chiralität dieser PBIs einem sehr starken Einfluss auf die Eigenschaften der kondensierten Materie, in welcher große Unterschiede für reine Enantiomere und das Racemat sowie zwischen PBIs mit unterschiedlichen Brückeneinheiten gefunden wurden. KW - Farbstoff KW - Selbstorganisation KW - Chiralität KW - Atropisomerie KW - Self-Sortierung KW - pi-pi Wechselwirkungen KW - Aggregation KW - self-sorting KW - chirality KW - pi-pi- stacking Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55359 ER - TY - JOUR A1 - Kaupp, Martin A1 - Schleyer, Paul von Rague T1 - Do Low-Coordinated Group 1-3 cations M\(^n\) \(^+\)L\(_m\) (Mn\(^+\) = K\(^+\), Rb\(^+\), Cs\(^+\), Ca\(^{2+}\), Sr\(^{2+}\), Ba\(^{2+}\), Sc\(^{3+}\), Y\(^{3+}\), La\(^{3+}\); L = NH\(_3\), H\(_2\)0, HF; m = 1-3) with a Formal Noble-Gas Electron Configuration Favor Regular or "Abnormal" Shapes? N2 - No abstract available KW - Anorganische Chemie Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-60111 ER - TY - THES A1 - Sengupta, Sanchita T1 - Bio-inspired Zinc Chlorin Dye Assemblies for Supramolecular Electronics T1 - Bio-adaptierte Zink-Chlorin Farbstoffverbände für supramolekulare Elektronik N2 - Chlorophylls are the most important pigments owing to their involvement in photosynthesis. They perform multiple functions that arise due to their optical and redox as well as packing properties. Semisynthetic zinc chlorins investigated in this thesis are the counterparts for the natural protein-free bacteriochlorophyll (BChl) c assemblies in light-harvesting (LH) systems in bacterial chlorosomes. The major advantage of the zinc chlorin model compounds over the native BChls lies in their facile semisynthetic accessibility from chlorophyll a (Chl a), their higher chemical stability and the possibility to influence their packing by suitable chemical modifications of peripheral side chains. Whilst the favorable excitonic properties and the suitability of ZnChl and natural BChl c dye aggregates for long distance exciton transport are well documented, charge transport properties of aggregates of semisynthetic ZnChls are hitherto unexplored. The present study involves structural elucidations of aggregates of a variety of semisynthetic zinc chlorin derivatives in solution, in solid state and on surfaces by combination of spectroscopic, crystallographic and microscopic techniques, followed by investigation of charge transport properties and conductivities of these aggregates. Chart 1 shows the different ZnChls synthesized in this work that are functionalized with hydroxy or methoxy substituents at 31 position and contain different substituents at the 172-position benzyl ester functional group. The self-assembly of these dyes is strongly dependent upon their chemical structures. While ZnChls 1a, 2a, 3, which are functionalized with 31-hydroxy group bearing dodecyl and oligoethylene glycol side chains form well-soluble rod aggregates, the corresponding 31-methoxy functionalized counterparts 1b, 2b form stacks in solution and on surfaces. These supramolecular polymers have been studied in detail in Chapter 3 by UV/Vis and circular dichroism (CD) spectroscopy and dynamic light scattering (DLS). These studies provided useful insights into the aggregation process of these two types of aggregates. Whereas 31-hydroxy functionalized ZnChl 1a self-assemble into rod aggregates via an isodesmic mechanism, corresponding stack aggregates of ZnChl 1b are formed by a cooperative nucleation-elongation pathway. Detailed electron microscopic studies such as transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) provided unequivocal evidence for hollow tubular nanostructures of water-soluble 31-hydroxy zinc chlorin 3 aggregates for the first time. The measured tube diameter of ~ 5-6 nm of these aggregates is in excellent agreement with electron microscopy data of BChl c rod aggregates in chlorosomes (Chloroflexus aurantiacus, diameter ~ 5-6 nm) and thus complied with the tubular model postulated by Holzwarth and Schaffner... In concord with their highly organized structures, micrometer-scale one dimensionality, robust nature and efficient charge transport capabilities, these self-assembled ZnChl nanotubular, stack and liquid crystalline assemblies are highly promising for supramolecular electronic applications. Research efforts in utilizing these assemblies for (opto)electronic device fabrication, for instance, in organic field effect transistors, should thus be rewarding in the future... N2 - Die Chlorophylle stellen in der Natur die wichtigsten Pigmente dar, weil sie verantwortlich für die Photosynthese sind und hierbei vielfältige Funktionen wahrnehmen, die sich aus ihrer Selbstassemblierung sowie den vorteilhaften optischen und Redox-Eigenschaften ergeben. Die in dieser Arbeit untersuchten semisynthetischen Zinkchlorine stellen Modellverbindungen des natürlichen Bacteriochlorophylls c (BChl c) der Lichtsammelsysteme (light-harvesting: LH) in Chlorosomen von Bakterien, jedoch ohne Proteingerüst, dar. Die entscheidenden Vorteile dieser Zinkchlorine (ZnChl) gegenüber den natürlichen BChls bestehen im einfachen semisynthetischen Zugang ausgehend von Chlorophyll a (Chl a), ihrer gesteigerten chemischen Stabilität sowie der Möglichkeit ihre Selbstassemblierung durch gezielte chemische Modifizierung der Seitenketten in der Peripherie zu steuern. Während bereits mehrfach über die vielversprechenden Redox- und excitonischen Eigenschaften von Aggregaten von ZnChl und natürlichem BChl c und den damit verbundene Voraussetzungen für Excitontransport über große Distanzen berichtet wurde, sind die Ladungstransporteigenschaften von Aggregaten der biomimetischen ZnChl bis heute unerforscht. Die vorliegende Arbeit beschäftigt sich mit der Aufklärung der Struktur von Aggregaten einer Vielzahl von semisynthetischen Zinkchlorophyllderivaten im Feststoff, in Lösung und auf Oberflächen durch die Kombination verschiedenster spektroskopischer, kristallographischer und mikroskopischer Techniken an die sich Untersuchungen zum Ladungstransport in den Aggregaten anschließen. Schema 1 zeigt die verschiedenen, in dieser Arbeit synthetisierten ZnChls, die entweder mit einer Hydroxy- oder Methoxygruppe in der 31-Position funktionalisiert sind sowie Substituenten unterschiedlicher Art, Länge und Verzweigung an der Benzylestergruppe in 172-Position tragen.Die Packung dieser Farbstoffe hängt entscheidend von ihrer chemischen Struktur ab. Während die ZnChls 1a, 2a, 3 mit 31-Hydroxygruppe und Alkylseitenketten (Dodecyl bzw. Oligoethylenglykol) gut lösliche stabförmige Aggregate bilden, lagern sich die analogen Verbindungen mit 31-Methoxygruppe (1b, 2b) zu Stapeln in Lösung und auf Oberflächen zusammen. Diese supramolekularen Polymere wurden im Detail in Kapitel 3 mit Hilfe von UV/Vis- und CD-Spektroskopie (circular dichroism: CD) sowie dynamische Lichtstreuung (dynamic light scattering: DLS) untersucht. Darüber hinaus lieferten temperaturabhängige UV/Vis- in Kombination mit DLS-Messungen wertvolle Informationen über die Aggregationsprozess dieser beiden Sorten von Aggregaten. Während sich die ZnChl 1a mit 31 Hydroxygruppe entsprechend dem isodesmischen Modell zu röhrenförmigen Aggregaten zusammenlagern, bilden sich die stapelförmigen Aggregate von 1b nach einem kooperativen Keimbildungs-Wachstums-Mechanismus (nucleation-elongation mechanism). Detaillierte elektronenmikroskopische Studien lieferten erstmals überzeugende Beweise für röhrenförmige Nanostrukturen der Aggregate des wasserlöslichen 31-Hydroxy Zinkchlorin 3. Die gemessenen Durchmesser der Röhren von ~ 5-6 nm dieser Aggregate liegen in hervorragender Übereinstimmung mit den Elektronenmikroskopie-Daten von BChl c Stabaggregaten in Chlorosomen (Chloroflexus aurantiacus, Durchmesser ~ 5-6 nm) und entsprechen damit dem von Holzwarth und Schaffner postulierten röhrenförmigen Modell... Im Einklang mit ihren hoch geordneten, robusten Strukturen, die sich eindimensional in einer Größenordnung von Mikrometeren erstrecken, sowie ihrer Fähigkeit zum effizienten Ladungs-trägertransport stellen diese selbstassemblierten Nanoröhren von ZnChls vielversprechende Ausgangsmaterialien für die Fertigung supramolekularer elektronischer Bauteile dar. Wissenschaftliche Bemühungen einige dieser Moleküle und ihre entsprechenden supramolekularen Polymere für die Fertigung von (opto-)elektronischen Bauteilen wie organischen Feldeffekttransistoren zu benutzten, stellen lohnende Aufgaben für die Zukunft dar... KW - Supramolekulare Chemie KW - Selbstorganisation KW - Chlorinderivate KW - Farbstoff KW - Selbstassemblierung KW - supramolekularen Elektronik KW - Zinkchlorine KW - Zinc Chlorin KW - Self-assembly KW - Supramolecular electronics Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66935 ER - TY - JOUR A1 - Wissing, Elmo A1 - Kaupp, Martin A1 - Boersma, Jaap A1 - Spek, Anthony L. A1 - Koten, Gerard van T1 - Alkylation Reactions of Dialkylzinc Compounds with 1,4- Diaza- 1,3-butadienes: Cationic and radical Anionic Organozinc Intermediates. Molecular Structure of the Cationic Organozinc Species [MeZn(t-BuN=CHCH=N-t-Bu)]O\(_3\)SCF\(_3\) and Me\(_2\)Zn(bpy)(bpy = 2,2' -Bipyridine) N2 - No abstract available KW - Anorganische Chemie Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-60008 ER -