TY - THES A1 - Höhne, Christian T1 - Das atriale natriuretische Peptid hemmt den vasokonstriktorischen Effekt von Angiotensin II in der Mikrozirkulation durch die Aktivierung des Regulators des G-Protein Signalweges 2 T1 - Atrial Natriuretic Peptide counteracts the microvascular vasoconstrictory effect of angiotensin II via activation of RGS2 N2 - Ziel der vorliegenden Arbeit war es, die Interaktion von ANP und Ang II im Bereich der blutdruckbestimmenden Widerstandsgefäße zu untersuchen. Ein besonderer Augenmerk wurde hierbei auch auf die Bedeutung von RGS2 gerichtet. Durch das Zusammenspiel der beiden funktionellen Antagonisten ANP und Ang II wird der Blutdruck reguliert. ANP und Ang II üben hierbei jeweils gegenteilige Effekte aus. Ang II hat vasokonstriktorische Effekte auf die Blutgefäße, vermindert die Natriurese und Diurese und erhöht den Sympathikustonus. ANP hingegen besitzt blutdruckmindernde Effekte, hervorgerufen durch Vasodilatation, gesteigerte Diurese, die Erhöhung der endothelialen Durchlässigkeit und der Hemmung des Sympathikustonus. Da nichts über die Interaktion dieser beiden Hormone in der Mikrozirkulation bekannt ist, wurden im Rahmen der Dissertation intravitalmikroskopische Studien der Mikrozirkulation des Musculus cremaster der Maus, in Anlehnung an der von Baez (1973) publizierten Methode, durchgeführt. Darüber hinaus wurden auch die Effekte von Ang II und ANP auf den Blutdruck durch invasive Blutdruckmessung untersucht. Der Durchmesser von präkapillären Arteriolen des M. cremaster wurde vor und während lokaler Superfusion von Ang II oder ANP gemessen. Ang II löste eine konzentrationsabhängige stabile Konstriktion aus. Bei der ausschließlichen Superfusion von ANP in verschiedenen Konzentrationen hingegen, zeigte sich kein Effekt auf den basalen Vasotonus. ANP war jedoch in der Lage, an Ang II vorkontrahierten Arteriolen, den konstriktorischen Effekt von Ang II aufzuheben und sogar darüber hinaus eine ausgeprägte Vasodilatation zu bewirken. Dieser Effekt konnte auch bei der invasiven Messung des mittleren arteriellen Blutdrucks nachgewiesen werden. Der durch Ang II ausgelöste Blutdruckanstieg wurde durch die zusätzliche Infusion von ANP gemindert. Ang II aktiviert die Kontraktion von glatten Gefäßmuskelzellen durch den Gαq-gekoppelten AT1-Rezeptor. RGS2 hingegen ist ein negativer Regulator von Gαq. Da von RGS2 bekannt ist, dass er von cGKI phosphoryliert und stimuliert wird (Osei-Owusu et al., 2007), stellte sich die Frage, ob ANP über RGS2 dem vasokonstriktiven Effekt von Ang II entgegenwirkt. Bei den Versuchen an RGS2-KO Mäusen zeigt sich hierbei, dass ANP nicht mehr in der Lage ist, den vasokonstriktiven Effekt von Ang II aufzuheben. Daraus ist nun der Schluss zu ziehen, dass RGS2 eine bedeutende Rolle für die Wechselwirkung zwischen ANP und Ang II in der Mikrozirkulation spielt und somit eine wichtige Aufgabe bei der Regulation des peripheren Widerstands und des Blutdrucks hat. N2 - The aim of this dissertation was the investigation of the interactions between ANP and Ang II in the regulation of the tone of resistance vessels, with special focus on the role of RGS2. Arterial blood pressure is regulated by the interactions of ANP and Ang II, hormones which act as functional counterparts. Ang II leads to vasoconstriction, reduces natriuresis and diuresis, and enhances sympathetic tone. ANP on the contrary has hypotensive effects, mediated by vasodilatation, diuresis, increased endothelial permeability, and inhibition of sympathetic tone. Because nothing is known about the interaction of both hormones in resistance vessels, we performed intravital microscopy studies of the mouse cremaster microcirculation. The cremaster muscle was prepared as described by Baez (1973). Furthermore the effects of ANP and Ang II on arterial blood pressure were investigated by invasive blood pressure measurements. Arteriolar diameters were measured before and during local superfusion of Ang II or ANP. Ang II induced concentration dependent stable arteriolar constrictions. ANP did not affect diameters of unstimulated arterioles. However the peptide completely reversed the vasoconstrictory effect of Ang II. Moreover, in Ang II-preconstricted arterioles, ANP provoked a prominent dilatation. The interaction between ANP and Ang II was collaborated by invasive arterial blood pressure measurements. The hypertensive effect of Ang II was partly reversed by ANP. Ang II activates smooth muscle contraction through the the Gαq-coupled AT1 -receptor. The regulator of G protein signalling RGS2 is a negative regulator of Gαq. Because RGS2 is known to be phosphorylated and thereby stabilized by cGMP-dependent protein kinase (cGKI) (Osei-Owusu et al., 2007), we hypothesized that ANP counteracts the vasoconstrictory actions of Ang II by activation of RGS2. Indeed in RGS2-KO mice ANP failed to reverse the vasoconstrictory actions of Ang II. We conclude that RGS2 mediates the interplay between ANP and Ang II, which is critically involved in the regulation of peripheral resistance and arterial blood pressure. KW - ANP KW - Ang II KW - RGS2 KW - Mikrozirkulation KW - Cremaster KW - Blutdruck KW - ANP KW - Ang II KW - RGS2 KW - microcirculation KW - cremaster KW - bloodpressure Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85229 ER - TY - JOUR A1 - Kauffmann, Frederic A1 - Höhne, Christian A1 - Assaf, Alexandre Thomas A1 - Vollkommer, Tobias A1 - Semmusch, Jan A1 - Reitmeier, Aline A1 - Stein, Jamal Michel A1 - Heiland, Max A1 - Smeets, Ralf A1 - Rutkowski, Rico T1 - The influence of local pamidronate application on alveolar dimensional preservation after tooth extraction — an animal experimental study JF - International Journal of Molecular Sciences N2 - The aim of this randomized, controlled animal exploratory trial was to investigate the influence of local application of aminobisphosphonate pamidronate during the socket preservation procedure. Mandibular premolars were extracted in five Göttingen minipigs. Two animals underwent socket preservation using BEGO OSS (n = 8 sockets) and three animals using BEGO OSS + Pamifos (15 mg) (n = 12 sockets). After jaw impression, cast models (baseline, eight weeks postoperative) were digitized using an inLab X5 scanner (Dentsply Sirona) and the generated STL data were superimposed and analyzed with GOM Inspect 2018 (GOM, Braunschweig). After 16 weeks, the lower jaws were prepared and examined using standard histological methods. In the test group (BEGO OSS + pamidronate), buccooral dimensional loss was significantly lower, both vestibulary (−0.80 ± 0.57 mm vs. −1.92 ± 0.63 mm; p = 0.00298) and lingually (−1.36 ± 0.58 mm vs. −2.56 ± 0.65 mm; p = 0.00104) compared with the control group (BEGO OSS). The test group showed a significant difference between vestibular and lingual dimensional loss (p = 0.04036). Histology showed cortical and cancellous bone in the alveolar sockets without signs of local inflammation. Adjuvant application of pamidronate during socket preservation reduces alveolar dimensional loss significantly. Further investigations with regard to dose–response relationships, volume effects, side effects, and a verification of the suitability in combination with other bone substitute materials (BSMs) are necessary. KW - pamidronate KW - socket preservation KW - ridge preservation KW - bone remodeling KW - bone regeneration KW - bisphosphonates Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-285173 SN - 1422-0067 VL - 21 IS - 10 ER - TY - JOUR A1 - Höhne, Christian A1 - Schwarzbauer, Raphael A1 - Schmitter, Marc T1 - Introduction of a new teaching concept for crown preparation with 3D printed teeth JF - European Journal of Dental Education N2 - Introduction For both students and teachers, it is challenging to learn and teach a correct crown preparation. The purpose of this study was the design, feasibility and evaluation of a 3D printed tooth model with internal preparation for dental education in crown preparation and to analyse the quality of the prepared printed teeth in comparison with prepared standard model teeth. Materials and methods A printable tooth was designed and printed by a stereolithographic printer. 38 fourth‐year dental students in the first clinical course in prosthodontics were trained in a voluntary course using printed teeth. Different aspects of the printed tooth were evaluated by a questionnaire using German school grades (1 best to 5 worst). The quality of the preparation with the printed teeth and standard training teeth was also rated in an evaluation form done by an expert group consisting of five experienced dentists. Results The workflow was feasible and cost‐effective for the production of the teeth. The overall rating of the printed tooth was Ø 2.0 ± 0.34 in the questionnaire completed by the students. The students rated the printed tooth model (Ø 2.1 ± 0.85) as significantly better than the standard model tooth (Ø 3.3 ± 0.77; P = .000). The students reported great benefits in the use of this model tooth, for example valuable replacement of a standard model and real teeth, direct control of material loss. The quality of the preparation was evaluated by the expert group as significantly better with an overall mean grade of Ø 2.6 ± 0.37 for the printed teeth compared to Ø 2.9 ± 0.42 for the standard model teeth (P = .000). Conclusions The feasibility of this teaching concept was confirmed. The students favoured to work on the innovative 3D‐teeth with internal preparation, emphasising the usefulness of this technique in dental education. The expert group confirmed also the significant training effect of this tooth model in contrast to a standard model tooth. KW - 3D printing KW - additive manufacturing KW - clinical practice KW - dental education KW - printed tooth KW - student training Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-218133 VL - 24 IS - 3 SP - 526 EP - 534 ER - TY - JOUR A1 - Höhne, Christian A1 - Dickhaut, Nora A1 - Schmitter, Marc T1 - Introduction of a new teaching concept for dentin post preparation with 3D printed teeth JF - European Journal of Dental Education N2 - Introduction The preparation for dentin posts is difficult and hard to learn. There are currently no reproducible simulation models to train this clinical procedure. The purpose of this study was the design, feasibility and evaluation of a three‐dimensional (3D) printed tooth model for the pre‐clinical teaching of students. Materials and methods A printable tooth was designed and printed by a stereolithographic printer. A total of 48 fourth‐year dental students in the first clinical course in prosthodontics were trained in a voluntary hands‐on course on 4 similar printed teeth. The students used standard model teeth and real‐teeth models during their education. They had experience in caries removement and root canal treatment on real patients. Root perforations were counted for every attempt. The different benefits of the 3D printed tooth were evaluated by a questionnaire using German school grades from 1 (best) to 6 (worst). Results The overall rating of the printed tooth was Ø1.9 ± 0.3. The item “suitable exercise option” was rated Ø2.0 ± 0.8, and the teeth were “easy to use” Ø1.9 ± 0.9. The item “realistic approach to dentin post preparation” was rated Ø2.1 ± 0.8, and the teeth showed the “shortcomings at a root perforation” Ø1.5 ± 0.6. The students reported to have much more motivation and enthusiasm to improve their skills with the printed teeth Ø2.1 ± 0.9. They had a strong desire to include these teeth in their pre‐clinical education before the first patient treatment Ø1.6 ± 0.8. The success rate of the dentin post preparation was significantly better for the second 25% (P = .047) and fourth 48% (P = .04) attempt. Conclusions The feasibility of this teaching concept was confirmed. The students had the possibility to learn a correct dentin post preparation on a printed tooth model. The learning effect with this tooth model was rated as good to very good by the questionnaire. KW - 3D printing KW - additive manufacturing KW - CAD KW - CAM KW - clinical practice KW - dental education KW - dentin post KW - printed tooth KW - rapid prototyping KW - stereolithography KW - student training Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-215586 VL - 24 IS - 3 SP - 499 EP - 506 ER - TY - JOUR A1 - Schneider, Sonja Jasmin Maria A1 - Höhne, Christian A1 - Schneider, Martin A1 - Schmitter, Marc T1 - Photoacoustic tomography versus cone-beam computed tomography versus micro-computed tomography: Accuracy of 3D reconstructions of human teeth JF - PloS One N2 - Objectives In this in-vitro study, teeth were imaged using photoacoustic tomography (PAT), cone-beam computed tomography (CBCT), and micro-computed tomography (μ-CT). The study had aim: to identify the best wavelength for PAT images to determine the accuracy of the three imaging methods, and to determine whether PAT images of teeth can achieve acceptable reconstruction quality. Methods Nineteen human mandibular single-rooted incisors were extracted from patients with trauma or periodontitis. To determine the best wavelength for acquiring photoacoustic images, all 19 teeth were scanned in vitro with PAT, using different laser wavelengths between 680 and 960 nm. The images were analyzed using image analysis software. To assess the accuracy of PAT and compare it with the accuracy of CBCT, each tooth was also scanned in vitro using CBCT and the reference standard technique of μ-CT. Subsequently, three different three-dimensional models, one for each imaging technique, were created for each tooth. Finally, the three different three-dimensional models acquired for the same tooth were matched and analyzed regarding volume and surface. Results The highest quality tooth images were achieved using the 680 nm wavelength, which showed the best contrast ratio. The full geometry of the dental root (μ-CT compared with PAT) could be visualized with relative standard deviations of 0.12 mm for the surface and −7.33 mm3 for the volume (n = 19). The full geometry of the dental root (μ-CT compared with CBCT) could be visualized with relative standard deviations of 0.06 mm for the surface and −14.56 mm3 for the volume (n = 19). The difference between the PAT–μ-CT group and CBCT–μ-CT group regarding the total average of the root surface area was not significant (p>0.06). Conclusion Images, which were acquired using PAT at 680nm showed the best contrast ration, enabling the identification of dentin, cementum and the dental pulp. No significant differences were found between the PAT–μ-CT group and CBCT–μ-CT group regarding the total average of the RSA and the total volume. Thus, three-dimensional reconstructions based on in-vitro PAT are already of acceptable reconstruction quality. KW - teeth KW - imaging techniques KW - computer software KW - incisors KW - in vivo imaging KW - caries KW - magnetic resonance imaging KW - tomography Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-301437 VL - 17 IS - 12 ER -