TY - THES A1 - Bozkaya, Begüm T1 - Influence of Carbon Additives on the Electrochemical Performance of Modern Lead-Acid Batteries T1 - Einfluss von Kohlenstoffadditiven auf die elektrochemische Leistung moderner Blei-Säure-Batterien N2 - In the first part of this thesis, a validation of both short-term and long-term DCA tests on 2 V laboratory cells is focussed. The aim is to improve the laboratory cell level measurement technology for dynamic charge acceptance regarding the investigation of carbon additives. To address this issue, it is crucial to apply carbon additives generating a remarkable difference in charge acceptance. For this purpose, five different carbon additives providing a variation in the specific external surface were included as additives in the negative plates of 2 V lead-acid cells. Both short-term (charge acceptance test 2 from SBA and DCA from EN) and long-term (Run-in DCA from Ford) DCA tests were executed on the lead-acid cells. Further understanding of the mechanism was studied by applying electrochemical methods like cyclic voltammetry and electrochemical impedance spectroscopy. The second part of this thesis aims to understand the impact of carbon surface functional groups on the electrochemical activity of the negative electrodes as well as the DCA of 2 V lead-acid cells. In order to address this topic, commercially available activated carbon was modified by different chemical treatments to incorporate specific surface functional groups in the carbon structure. A series of activated carbons having a broad range of pH was prepared, which were used as additives in the negative electrodes. The corresponding lead-acid cells were subjected to cyclic voltammetry and DCA test according to EN. Further, the physical and chemical properties of the functionalized carbon additives were intensively analyzed to establish a structure-property relationship with a focus on DCA. N2 - Im ersten Teil dieser Arbeit geht es um die Validierung von Kurzzeit- und Langzeit-DCA-Tests an 2-V-Laborzellen. Ziel ist es, die Messtechnik für die dynamische Ladungsakzeptanz auf Laborzellenniveau im Hinblick auf die Untersuchung von Kohlenstoffadditiven zu verbessern. Dazu ist es entscheidend, Kohlenstoffadditive einzusetzen, die einen deutlichen Unterschied in der Ladungsakzeptanz bewirken. Zu diesem Zweck wurden fünf verschiedene Kohlenstoffadditive, die eine Variation der spezifischen äußeren Oberfläche bewirken, als Additive in die negativen Platten von 2-V-Blei-Säure-Zellen eingebracht. An den Blei-Säure-Zellen wurden sowohl Kurzzeit- (Ladeakzeptanztest 2 von SBA und DCA von EN) als auch Langzeit-DCA-Tests (Run-in DCA von Ford) durchgeführt. Zum weiteren Verständnis des Mechanismus wurden elektrochemische Methoden wie zyklische Voltammetrie und elektrochemische Impedanzspektroskopie eingesetzt. Der zweite Teil dieser Arbeit zielt darauf ab, den Einfluss der funktionellen Kohlenstoffoberflächengruppen auf die elektrochemische Aktivität der negativen Elektroden sowie auf die DCA von 2-V-Bleisäurezellen zu verstehen. Zu diesem Zweck wurde handelsübliche Aktivkohle durch verschiedene chemische Behandlungen modifiziert, um spezifische funktionelle Oberflächengruppen in die Kohlenstoffstruktur einzubringen. Es wurde eine Reihe von Aktivkohlen mit einem breiten pH-Bereich hergestellt, die als Zusätze in den negativen Elektroden verwendet wurden. Die entsprechenden Blei-Säure-Zellen wurden der zyklischen Voltammetrie und dem DCA-Test gemäß EN unterzogen. Außerdem wurden die physikalischen und chemischen Eigenschaften der funktionalisierten Kohlenstoffadditive intensiv analysiert, um eine Struktur-Eigenschafts-Beziehung mit Schwerpunkt auf DCA herzustellen. KW - Bleiakkumulator KW - Blei KW - Batterie KW - Kohlenstoff KW - Elektrochemie KW - Lead-acid batteries KW - Carbon additives KW - Dynamic charge acceptance KW - Carbon surface chemistry Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-319174 ER - TY - THES A1 - Wulfert-Holzmann, Paul T1 - Die elektrische Leitfähigkeit des negativen Aktivmaterials moderner Blei-Säure-Batterien T1 - The electrical conductivity of the negative active material in modern lead-acid batteries N2 - Diese Doktorarbeit beschäftigt sich mit dem Wirkmechanismus der elektrischen Leitfähigkeit in Blei-Säure-Batterien. Obwohl ihm eine zentrale Rolle beim „Kohlenstoff-Effekt“ zugeordnet wird, ist der Wirkmechanismus der elektrischen Leitfähigkeit bislang vergleichsweise wenig untersucht worden und konnte dementsprechend noch nicht vollständig aufgeklärt werden. Mit dem Anspruch, diese Forschungslücke zu schließen, zielt die vorliegende Doktorarbeit darauf ab, den Einfluss der elektrischen Leitfähigkeit auf die Performance der Blei-Säure-Batterie systematisch herauszuarbeiten und so einen Beitrag zur Generierung neuer Entwicklungsansätze zu leisten, z. B. in Form von maßgeschneiderten Additiven. Bislang ist noch unklar, ob allein die elektrische Leitfähigkeit des Aktivmaterials relevant ist oder diese auch durch Additive beeinflusst wird. Das liegt vor allem daran, dass geeignete Messmethoden fehlen und deshalb der Einfluss von Additiven auf die elektrische Leitfähigkeit des Aktivmaterials wenig untersucht wurde. Deswegen zielt diese Arbeit auch darauf ab, eine neuartige Messmethode zu entwickeln, um die elektrische Leitfähigkeit des Aktivmaterials im laufenden Betrieb bestimmen zu können. Aufgrund der Vorkenntnisse und Vorarbeiten am Fraunhofer ISC werden die Untersuchungen dabei auf die negative Elektrode limitiert. Insgesamt unterteilt sich die Doktorarbeit in die zwei Abschnitte. Im ersten Abschnitt werden elektrisch isolierende Stöber-Silica als Additive im negativen Aktivmaterial eingesetzt, um den Einfluss der elektrischen Leitfähigkeit des Additivs auf die elektrochemischen Eigenschaften der Batterie herauszustellen. Untersucht wird dabei die u.a. die Doppelschichtkapazität, die Wasserstoffentwicklung und die dynamische Ladeakzeptanz. Im zweiten Abschnitt steht die elektrische Leitfähigkeit des negativen Aktivmaterials im Fokus. Es wird zunächst eine neue Messmethodik entwickelt, die ihre in-situ- und operando-Bestimmung ermöglicht. Nach einer umfassenden Evaluierung und der Betrachtung verschiedener Betriebsparameter wird die Methodik für eine erste proof-of-concept-Messreihe angewendet, um den Einfluss von Additiven auf die elektrische Leitfähigkeit des negativen Aktivmaterials zu untersuchen. N2 - This dissertation deals with the effect mechanism of electrical conductivity in lead-acid batteries. Although it is believed to play a key role in the "carbon effect", the effect mechanism of electrical conductivity has been studied to lesser extent than other factors so far and accordingly has not yet been fully elucidated. With the aim of closing this research gap, the present dissertation aims to systematically work out the influence of electrical conductivity on lead-acid battery performance and thus contribute to the generation of new development approaches, e.g. in the form of tailored additives. So far, it is still unclear whether the electrical conductivity of the active material alone is relevant or whether this is also influenced by additives. This is mainly due to the fact that suitable measurement methods are lacking and therefore the influence of additives on the electrical conductivity of the active material has been investigated to less extent. Therefore, this work also aims to develop a novel measurement method to determine the electrical conductivity of the active material during operation. Due to the previous knowledge and work at Fraunhofer ISC, the investigations are limited to the negative electrode. Overall, the thesis is divided into two sections. In the first section, electrically insulating Stöber silica particles are used as additives in the negative active material in order to highlight the influence of the electrical conductivity of the additive on the electrochemical properties of the battery. Among other things, the double-layer capacitance, hydrogen evolution and dynamic charge acceptance are investigated. The second section focuses on the electrical conductivity of the negative active material. First, a new measurement methode is developed that allows its in-situ and operando determination. After a comprehensive evaluation and consideration of various operational parameters, the methodology is applied to a first proof-of-concept series of measurements to investigate the influence of additives on the electrical conductivity of the negative active material. KW - Bleiakkumulator KW - Blei KW - Batterie KW - Kohlenstoff KW - Elektrochemie KW - Blei-Säure-Batterie KW - Stöber-Silica KW - operando-Messung KW - Lead-acid batteries KW - Stöber silica Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-298397 ER - TY - THES A1 - Settelein, Jochen T1 - Kohlenstoffadditive für negative Elektroden von modernen Blei-Säure Batterien T1 - Carbon additives for negative electrodes of modern lead-acid batteries N2 - In vorliegender Dissertation wurde die Wirkweise von Kohlenstoffadditiven auf die verbesserten Ladeeigenschaften negativer Blei-Kohlenstoff Elektroden untersucht, wodurch ein wichtiger Beitrag für die Weiterentwicklung modernen Blei-Säure Batterien geliefert wurde. Neben der Aufklärung der elektrochemischen Prozesse an Kohlenstoffoberflächen, trug die Arbeit dazu bei, das Verständnis hinsichtlich der Rolle des Kohlenstoffs zur Erhöhung der dynamischen Stromaufnahme zu vertiefen und eine Messmethodik zur Bestimmung der Blei-Affinität von Graphitpulver zu entwickeln. Die wichtigsten Erkenntnisse dieser drei Themenfelder werden an dieser Stelle noch einmal zusammengefasst. Elektrochemische Untersuchungen an amorphem Kohlenstoff: Um ein grundsätzliches Verständnis über die elektrochemische Aktivität von Kohlenstoff in verdünnter Schwefelsäure zu erhalten, wurden in Kapitel 4 die elektrochemisch ablaufenden Reaktion an der Phasengrenze Kohlenstoff/verdünnte Schwefelsäure bestimmt und diskutiert. Als Messmethode diente eine rotierende Scheibenelektrode aus glasartigem Kohlenstoff. Im Gegensatz zu inerten, metallischen Elektroden, zeigte sich an glasartigem Kohlenstoff ein deutlich komplexeres Verhalten. Die Kohlenstoffoberfläche verändert sich in Abhängigkeit des anliegenden Potentials signifikant. Für Potentiale über 1,0 V vs. RHE findet eine Oxidation des Kohlenstoffs statt und eine Zersetzung zu CO2. Diese Veränderungen haben wiederum Auswirkungen auf alle anderen elektrochemisch ablaufenden Reaktionen. So wurde durch umfassende zyklovoltammetrische Untersuchungen und mithilfe der differentiellen elektrochemischen Massenspektroskopie erstmals nachgewiesen, dass die Wasserstoffentwicklung durch kurzzeitige Oxidation des Kohlenstoffs signifikant unterdrückt werden kann. Zusätzliche Überspannungen von über einem Volt legen den Verdacht nahe, dass die Adsorption von Protonen verhindert wird und die Zersetzung des Elektrolyten erst durch Radikalbildung bei extremen Potentialen unter 2,0 V vs. RHE stattfindet. Zukünftig lässt sich dieser Effekt möglicherweise dazu einsetzen, die Nebenreaktion in Blei-Säure Batterien gezielt zu verringern . Struktur-Eigenschafts-Beziehung zwischen externer Kohlenstoffoberfläche und dynamischer Stromaufnahme: Im Anschluss an die elektrochemische Analyse der reinen Kohlenstoffelektrode wurde in Kapitel 5 die Struktur-Eigenschafts-Beziehung von amorphem Kohlenstoff auf die elektrochemische Aktivität negativer Blei-Kohlenstoff-Elektroden systematisch untersucht. Hierzu wurden Elektroden aus sechs verschiedenen negativen Aktivmasserezepturen hergestellt, welche sich einzig im zugemischten Kohlenstoffadditiv unterschieden. Durch die Verwendung von Kohlenstoffpulver mit gezielt eingestellter spezifischer Oberfläche, konnte zum ersten Mal nachgewiesen werden, dass allein die externe Kohlenstoffoberfläche relevant für die Erhöhung der Aktivität der Elektrode ist. Zyklovoltammetrische Messungen zeigten, dass sowohl die Wasserstoffentwicklungsreaktion als auch die Doppelschichtkapazität durch eine zusätzlich in die Aktivmasse eingebrachte externe Kohlenstoffoberfläche verstärkt wird. Erstmals wurde ein linearer Zusammenhang zwischen Doppelschichtkapazität und dynamischer Stromaufnahme festgestellt, der belegt, dass die Erhöhung der dynamischen Stromaufnahme auf einen reinen Oberflächeneffekt zurückzuführen ist. Da sowohl der Strom durch die Wasserstoffentwicklung als auch durch die Ladung der Doppelschicht nicht ausreichen, um die erhöhte Stromaufnahme zu erkären, muss davon ausgegangen werden, dass die Bleisulfatreduktion durch den Kohlenstoff katalysiert wird. Erklärungsansätze sind eine vergrößerte aktive Oberfläche an Bleisulfat aufgrund einer eröhten Porosität und die Adsorption des oberflächenaktiven Ligninsulfonats auf der Kohlenstoffoberfläche anstelle der des Bleisulfats . Blei-Affinität von Graphitpulver: Abschließend wurde in Kapitel 6 eine neue Messmethodik evaluiert, um die Elektrokristallisation von Blei auf Kohlenstoffadditiven zu charakterisieren. Hierfür wurde Bleimetall potentiostatisch aus wässriger Lösung auf graphitische Kohlenstoffelektroden abgeschieden und das Kristallwachstum und die Keimzahldichte anhand mikroskopischer Betrachtungen und Modellierung der Strom-Zeit-Transienten analysiert. Es konnte gezeigt werden, dass sich Blei in partikulärer Form an definierten Stellen der Graphitkristalle abscheidet und dass die Anzahl an Keimstellen durch die Höhe der Abscheidespannung variiert werden kann. In Anwesenheit von Ligninsulfonat wird das Keimwachstum verlangsamt und die ursprünglich instantane Keimbildung in eine progressive überführt. Ein für die Anwendung besonders relevantes Ergebnis lieferte der Vergleich zweier kommerzieller Graphitpulver, welche sowohl im Modellversuch, als auch als Additiv in negativen Bleielektroden eine signifikant unterschiedliche Keimzahldichte aufzeigten. Graphite mit einer hohen Kristallitgröße zeigen eine besonders hohe Bleiaffinität. N2 - This study elucidated the mechanism of carbon additives on the improved charging behavior of negative lead-carbon electrodes, thus making a major contribution to further development of modern lead-acid batteries. In addition to the investigation of the electrochemical processes occurring at the interface between carbon and diluted sulfuric acid, a better understanding of the role of carbon additives in the dynamic charge acceptance was gained. Additionally, a new method was established to characterize the affinity of graphite powder towards lead. The major findings of the three main parts of this work are summarized below. Electrochemical activity of amorphous carbon: The electrochemical reactions that take place at the phase boundary carbon/sulfuric acid were defined in chapter 4 in order to have a better general understanding of the electrochemical activity of carbon in dilute sulfuric acid. The measurements were performed on a rotating disc electrode setup with a glassy carbon electrode. The glassy carbon electrode revealed a much more complex behavior in contrast to inert metallic electrodes. Specifically, the carbon surface changes significantly depending on the applied potential. For potentials above 1.0 V vs. RHE, the carbon electrode is oxidized and decomposes into CO2. This affects all of the other electrochemical reactions. Through an extensive study via cyclic voltammetry and differential electrochemical mass spectroscopy, for the first time, evidence could be provided that the hydrogen evolution reaction can be suppressed significantly by a short anodic oxidation of the carbon electrode. An additional overvoltage of more than one volt suggests an impeded adsorption of protons and a generation of molecular hydrogen only for extremely negative potentials below 2.0 V vs. RHE via hydrogen radicals occurs. This effect might be systematically applied in the future to lower the side reactions in lead-acid batteries. Structure-property relationship between amorphous carbon and the dynamic charge acceptance: Following the analysis of the glassy carbon electrode, the structure-property relationship between amorphous carbon and the dynamic charge acceptance of negative lead-carbon electrodes was systematically investigated in chapter 5. Electrodes with six different active material formulations were produced in which only the type of carbon additive was changed. Through the implementation of carbon powders with a tailored specific surface area it could be proven, for the first time that the external surface area of the carbon particles has an effect on the electrochemical activity of the electrode. Cyclic voltammetry revealed an increase in the hydrogen evolution activity as well as double layer capacitance with higher external carbon surface areas. A linear relationship between the double layer capacitance and the dynamic charge acceptance indicated for the first time that the improved charging behavior of the electrodes originates solely from a surface area effect of the carbon additive. It can be concluded that the increase in charge acceptance has to be generated by a catalyzed reduction of lead sulfate as the hydrogen evolution reaction and the double layer charging cannot deliver as much charging current as is observed in the test. This result could be explained by an increased electrochemical active surface area of lead sulfate either by an improved porosity due to the presence of the carbon or by the adsorption of lignosulfonate onto the carbon surface that would otherwise block the lead sulfate. Lead-affinity of graphite: In chapter 6, a new method was introduced to characterize the electrocrystallization of lead on carbon additives. Potentiostatic deposition from aqueous solution was applied to analyze the nucleation and growth mechanism of lead on graphite powder. The number of active nucleation sites was evaluated by microscopic investigation and by modelling of the current-time transients. The measurements revealed that single lead particles are deposited on defined sites of the graphite surface. The number of active sites can be varied by adjusting the deposition overpotential. Lignosulfonate slows the nucleation process and changes the nucleation from an instantaneous to a progressive regime. The comparison of two different commercially available graphite powders provided an important result with respect to the application. Expanded graphite with a big crystallite size exhibits an exceptionally high affinity towards lead. Initial investigations also indicate that a high number of lead particles on graphite is disadvantageous for generating a high dynamic charge acceptance. In this case, a bigger part of the carbon surface area can be covered by lead and therefore reduces the effect of the carbon surface. KW - Kohlenstoff KW - Batterie KW - Blei KW - Akkumulator KW - Elektrochemie KW - Blei-Säure KW - Kohlenstoffadditive KW - Lead-Acid KW - Carbon Additives Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210986 ER -