TY - JOUR A1 - Vollmer, Andreas A1 - Saravi, Babak A1 - Breitenbuecher, Niko A1 - Mueller-Richter, Urs A1 - Straub, Anton A1 - Šimić, Luka A1 - Kübler, Alexander A1 - Vollmer, Michael A1 - Gubik, Sebastian A1 - Volland, Julian A1 - Hartmann, Stefan A1 - Brands, Roman C. T1 - Realizing in-house algorithm-driven free fibula flap set up within 24 hours BT - a pilot study evaluating accuracy with open-source tools JF - Frontiers in Surgery N2 - Objective: This study aims to critically evaluate the effectiveness and accuracy of a time safing and cost-efficient open-source algorithm for in-house planning of mandibular reconstructions using the free osteocutaneous fibula graft. The evaluation focuses on quantifying anatomical accuracy and assessing the impact on ischemia time. Methods: A pilot study was conducted, including patients who underwent in-house planned computer-aided design and manufacturing (CAD/CAM) of free fibula flaps between 2021 and 2023. Out of all patient cases, we included all with postoperative 3D imaging in the study. The study utilized open-source software tools for the planning step, and three-dimensional (3D) printing techniques. The Hausdorff distance and Dice coefficient metrics were used to evaluate the accuracy of the planning procedure. Results: The study assessed eight patients (five males and three females, mean age 61.75 ± 3.69 years) with different diagnoses such as osteoradionecrosis and oral squamous cell carcinoma. The average ischemia time was 68.38 ± 27.95 min. For the evaluation of preoperative planning vs. the postoperative outcome, the mean Hausdorff Distance was 1.22 ± 0.40. The Dice Coefficients yielded a mean of 0.77 ± 0.07, suggesting a satisfactory concordance between the planned and postoperative states. Dice Coefficient and Hausdorff Distance revealed significant correlations with ischemia time (Spearman's rho = −0.810, p = 0.015 and Spearman's rho = 0.762, p = 0.028, respectively). Linear regression models adjusting for disease type further substantiated these findings. Conclusions: The in-house planning algorithm not only achieved high anatomical accuracy, as reflected by the Dice Coefficients and Hausdorff Distance metrics, but this accuracy also exhibited a significant correlation with reduced ischemia time. This underlines the critical role of meticulous planning in surgical outcomes. Additionally, the algorithm's open-source nature renders it cost-efficient, easy to learn, and broadly applicable, offering promising avenues for enhancing both healthcare affordability and accessibility. KW - mandibular KW - reconstruction KW - preoperative KW - planning KW - ischemia KW - osteocutaneous KW - fibula KW - graft KW - computer-aided KW - design KW - manufacturing (CAD/CAM) Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-353945 N1 - Funding The author(s) declare that no financial support was received for the research, authorship, and/or publication of this article. VL - 10 ER - TY - JOUR A1 - Steinhaeusser, Sophia C. A1 - Oberdörfer, Sebastian A1 - von Mammen, Sebastian A1 - Latoschik, Marc Erich A1 - Lugrin, Birgit T1 - Joyful adventures and frightening places – designing emotion-inducing virtual environments JF - Frontiers in Virtual Reality N2 - Virtual environments (VEs) can evoke and support emotions, as experienced when playing emotionally arousing games. We theoretically approach the design of fear and joy evoking VEs based on a literature review of empirical studies on virtual and real environments as well as video games’ reviews and content analyses. We define the design space and identify central design elements that evoke specific positive and negative emotions. Based on that, we derive and present guidelines for emotion-inducing VE design with respect to design themes, colors and textures, and lighting configurations. To validate our guidelines in two user studies, we 1) expose participants to 360° videos of VEs designed following the individual guidelines and 2) immerse them in a neutral, positive and negative emotion-inducing VEs combining all respective guidelines in Virtual Reality. The results support our theoretically derived guidelines by revealing significant differences in terms of fear and joy induction. KW - virtual reality KW - virtual environments KW - immersion KW - emotions KW - design Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-284831 SN - 2673-4192 VL - 3 ER - TY - JOUR A1 - Scherer, Marc A1 - Fleishman, Sarel J. A1 - Jones, Patrik R. A1 - Dandekar, Thomas A1 - Bencurova, Elena T1 - Computational Enzyme Engineering Pipelines for Optimized Production of Renewable Chemicals JF - Frontiers in Bioengineering and Biotechnology N2 - To enable a sustainable supply of chemicals, novel biotechnological solutions are required that replace the reliance on fossil resources. One potential solution is to utilize tailored biosynthetic modules for the metabolic conversion of CO2 or organic waste to chemicals and fuel by microorganisms. Currently, it is challenging to commercialize biotechnological processes for renewable chemical biomanufacturing because of a lack of highly active and specific biocatalysts. As experimental methods to engineer biocatalysts are time- and cost-intensive, it is important to establish efficient and reliable computational tools that can speed up the identification or optimization of selective, highly active, and stable enzyme variants for utilization in the biotechnological industry. Here, we review and suggest combinations of effective state-of-the-art software and online tools available for computational enzyme engineering pipelines to optimize metabolic pathways for the biosynthesis of renewable chemicals. Using examples relevant for biotechnology, we explain the underlying principles of enzyme engineering and design and illuminate future directions for automated optimization of biocatalysts for the assembly of synthetic metabolic pathways. KW - computational KW - enzyme KW - engineering KW - design KW - biomanufacturing KW - biofuel KW - microbes KW - metabolism Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240598 SN - 2296-4185 VL - 9 ER - TY - JOUR A1 - Elabyad, Ibrahim A. A1 - Terekhov, Maxim A1 - Lohr, David A1 - Stefanescu, Maria R. A1 - Baltes, Steffen A1 - Schreiber, Laura M. T1 - A Novel Mono-surface Antisymmetric 8Tx/16Rx Coil Array for Parallel Transmit Cardiac MRI in Pigs at 7T JF - Scientific Reports N2 - A novel mono-surface antisymmetric 16-element transmit/receive (Tx/Rx) coil array was designed, simulated, constructed, and tested for cardiac magnetic resonance imaging (cMRI) in pigs at 7T. The cardiac array comprised of a mono-surface 16-loops with two central elements arranged antisymmetrically and flanked by seven elements on either side. The array was configured for parallel transmit (pTx) mode to have an eight channel transmit and 16-channel receive (8Tx/16Rx) coil array. Electromagnetic (EM) simulations, bench-top measurements, phantom, and MRI experiments with two pig cadavers (68 and 46 kg) were performed. Finally, the coil was used in pilot in-vivo measurements with a 60 kg pig. Flip angle (FA), geometry factor (g-factor), signal-to-noise ratio (SNR) maps, and high-resolution cardiac images were acquired with an in-plane resolution of 0.6 mm x 0.6 mm (in-vivo) and 0.3 mm x 0.3 mm (ex-vivo). The mean g-factor over the heart was 1.26 (R = 6). Static phase B-1(+) shimming in a pig body phantom with the optimal phase vectors makes possible to improve the B-1(+) homogeneity by factor > 2 and transmit efficiency by factor > 3 compared to zero phases (before RF shimming). Parallel imaging performed in the in-vivo measurements demonstrated well preserved diagnostic quality of the resulting images at acceleration factors up to R = 6. The described hardware design can be adapted for arrays optimized for animals and humans with a larger number of elements (32-64) while maintaining good decoupling for various MRI applications at UHF (e.g., cardiac, head, and spine). KW - high-field MRI KW - stepped impedance resonators KW - magnetic resoncance KW - transceiver array KW - SAR safety KW - design KW - body KW - element KW - antenna KW - images Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-229436 VL - 10 IS - 1 ER - TY - JOUR A1 - Ansell, Melvyn B. A1 - Kostakis, George E. A1 - Braunschweig, Holger A1 - Navarro, Oscar A1 - Spencer, John T1 - Synthesis of functionalized hydrazines: facile homogeneous (N-heterocyclic carbene)-palladium(0)-catalyzed diboration and silaboration of azobenzenes JF - Advanced Synthesis & Catalysis N2 - The bis(N-heterocyclic carbene)(diphenylacetylene)palladium complex Pd(ITMe)\(_2\)(PhCCPh)] (ITMe=1,3,4,5-tetramethylimidazol-2-ylidene) acts as a highly active pre-catalyst in the diboration and silaboration of azobenzenes to synthesize a series of novel functionalized hydrazines. The reactions proceed using commercially available diboranes and silaboranes under mild reaction conditions. KW - Palladium-catalyzed silaboration KW - B-B bond KW - molecular-structure KW - terminal alkynes KW - crystal-structure KW - alkenes KW - complexes KW - mechanism KW - boron KW - design KW - azobenzenes KW - dilaboration KW - N-heterocyclic carbenes KW - palladium KW - silaboration Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-186582 VL - 358 IS - 23 ER - TY - JOUR A1 - Walter, Maggie C. A1 - Reilich, Peter A1 - Thiele, Simone A1 - Schessl, Joachim A1 - Schreiber, Herbert A1 - Reiners, Karlheinz A1 - Kress, Wolfram A1 - Müller-Reible, Clemens A1 - Vorgerd, Matthias A1 - Urban, Peter A1 - Schrank, Bertold A1 - Deschauer, Marcus A1 - Schlotter-Weigel, Beate A1 - Kohnen, Ralf A1 - Lochmüller, Hans T1 - Treatment of dysferlinopathy with deflazacort: a double-blind, placebo-controlled clinical trial JF - Orphanet Journal of Rare Diseases N2 - Background: Dysferlinopathies are autosomal recessive disorders caused by mutations in the dysferlin (DYSF) gene encoding the dysferlin protein. DYSF mutations lead to a wide range of muscular phenotypes, with the most prominent being Miyoshi myopathy (MM) and limb girdle muscular dystrophy type 2B (LGMD2B). Methods: We assessed the one-year-natural course of dysferlinopathy, and the safety and efficacy of deflazacort treatment in a double-blind, placebo-controlled cross-over trial. After one year of natural course without intervention, 25 patients with genetically defined dysferlinopathy were randomized to receive deflazacort and placebo for six months each (1 mg/kg/day in month one, 1 mg/kg every 2nd day during months two to six) in one of two treatment sequences. Results: During one year of natural course, muscle strength declined about 2% as measured by CIDD (Clinical Investigation of Duchenne Dystrophy) score, and 76 Newton as measured by hand-held dynamometry. Deflazacort did not improve muscle strength. In contrast, there is a trend of worsening muscle strength under deflazacort treatment, which recovers after discontinuation of the study drug. During deflazacort treatment, patients showed a broad spectrum of steroid side effects. Conclusion: Deflazacort is not an effective therapy for dysferlinopathies, and off-label use is not warranted. This is an important finding, since steroid treatment should not be administered in patients with dysferlinopathy, who may be often misdiagnosed as polymyositis. KW - Deflazacort KW - muscle strength KW - gridle muscular-dystrophy KW - Duchenne dystrphy KW - Miyoshi myopathy KW - mutation KW - prednisone KW - gene KW - 2B KW - children KW - design KW - steroids KW - therapy KW - dysferlinopathy KW - Limb girdle muscular dystrophy (LGMD) Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-125663 SN - 1750-1172 VL - 8 IS - 26 ER - TY - THES A1 - Gregor, Thomas T1 - {0,1}-Matrices with Rectangular Rule T1 - {0,1}-Matrizen mit Rechtecksregel N2 - The incidence matrices of many combinatorial structures satisfy the so called rectangular rule, i.e., the scalar product of any two lines of the matrix is at most 1. We study a class of matrices with rectangular rule, the regular block matrices. Some regular block matrices are submatrices of incidence matrices of finite projective planes. Necessary and sufficient conditions are given for regular block matrices, to be submatrices of projective planes. Moreover, regular block matrices are related to another combinatorial structure, the symmetric configurations. In particular, it turns out, that we may conclude the existence of several symmetric configurations from the existence of a projective plane, using this relationship. N2 - Die Inzidenzmatrizen vieler kombinatorischer Strukturen erfüllen die sogenannte Rechtecksregel, d.h. das Skalarprodukt zweier beliebiger Zeilen der Matrix ist höchstens 1. Weiterhin wird eine Klasse von Matrizen mit Rechtecksregel untersucht, von denen einige auch Untermatrizen von Inzidenzmatrizen endlicher projektiver Ebenen sind. Es werden notwendige und hinreichende Bedingungen angegeben, wann dies der Fall ist. Darüberhinaus gibt es eine enge Beziehung zwischen dieser Klasse von Matrizen und einer anderen Struktur, den symmetrischen Konfigurationen. Es stellt sich unter anderem heraus, dass aus der Existenz einer projektiven Ebene mittels dieser Beziehung die Existenz verschiedener symmetrischer Konfigurationen gefolgert werden kann. KW - Projektive Ebene KW - Inzidenzmatrix KW - Kombinatorik KW - Endliche Geometrie KW - Symmetrische Konfiguration KW - (0 KW - 1)-Matrix KW - finite projective plane KW - incidence matrix KW - design KW - symmetric configuration KW - (0 KW - 1)-matrix Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28389 ER -