TY - THES A1 - Tröster, Tobias T1 - Darstellung und Reaktivität von Beryllolen sowie Dibenzoberyllolen T1 - Synthesis and Reactivity of berylloles as well as dibenzoberylloles N2 - Im Rahmen dieser Arbeit konnte zunächst die Reaktivität des CAAC-substituierten 2,3,4,5-Tetraphenylberyllols gegenüber häufig verwendeten Substraten für Ringerweiterungsreaktionen und Cycloadditionen untersucht werden. Weiterhin wurde die Darstellung eines neuen monocyclischen Beryllols beschrieben, welches aufgrund seines veränderten Rückgrats eine erhöhte Reaktivität verspricht. In einem weiteren Teil dieser Arbeit wurde die Verbindungsklasse der Dibenzoberyllole erstmals zugänglich gemacht. Zusätzlich wurde deren Reduktionsverhalten und thermische Zersetzung beispielhaft anhand eines CAAC-substituierten Dibenzoberyllols aufgeklärt. Im letzten Teil erfolgte die Untersuchung der Reaktivität dieser neuen Verbindungsklasse gegenüber Lewisbasen und typischen Substraten für Ringerweiterungsreaktionen. Weiterhin wurde die Möglichkeit, Dibenzoberyllole als Transferreagenzien für das Biphenylrückgrat zu nutzen, ermittelt. N2 - Within this thesis, the reactivity of the CAAC-substituted 2,3,4,5-tetraphenyl beryllole towards frequently used substrates for ring extension reactions and cycloadditions could first be investigated. Furthermore, the preparation of a new monocyclic beryllole was described, which promises increased reactivity due to its modified backbone. In another part of this work, the compound class of dibenzoberylloles was made accessible for the first time. In addition, their reduction behaviour and thermal decomposition were elucidated using a CAAC-substituted dibenzoberyllole as an example. In the last part, the reactivity of this new class of compounds towards Lewis bases and typical substrates for ring extension reactions was investigated. Furthermore, the possibility of using dibenzoberylloles as transfer reagents for the biphenyl backbone was determined. KW - Beryllium KW - Heterocyclische Verbindungen KW - Beryllole KW - Dibenzoberyllole KW - Beryllafluorene Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-289117 ER - TY - THES A1 - Thiess, Torsten T1 - Synthese und Reaktivität von 1,4-Diaza-2,3-diborininen T1 - Synthesis and reactivity of 1,4-diaza-2,3-diborinines N2 - In der vorliegenden Arbeit wurde die Synthese, Funktionalisierung und Reaktivität von 1,4,2,3-Diazadiborininen untersucht. Zu Beginn sollten Bis(dimethylamino)-substituierte Diazadiborinine mit unterschiedlichen Resten an den Stickstoffatomen dargestellt werden, deren weitere Funktionalisierung später im Fokus stand. Die Synthese erfolgte durch Reduktion von 1,4-Diazabutadienen mit elementarem Lithium und anschließender Salzeliminierungsreaktion mit B2(NMe2)2Cl2. Dadurch ließen sich die monocyclischen vier N,N’-Diaryl-substituierten Diazadiborinine sowie ein Alkyl-substituiertes Diazadiborinin darstellen. Durch etablierte Methoden der Diboran(4)-Chemie wurden diese in ihre Halogenderivate (Cl, Br, I) überführt. Aus diesen konnten drei 2,3-Diazido-1,4,2,3-diazadiborinine durch Umsetzung mit TMSN3 aus den Dihalogenderivaten dargestellt werden. Diese stellen hierbei die ersten isolierten Diboran(4)azidverbindugen dar. Ebenso gelang die Synthese eines bicyclischen Naphthalinisosters, welches erneut erfolgreich in seine Halogenderivate sowie das Diazdidoderivat überführt werden konnte. Einen Einblick in den Mechanismus der 1,4,2,3-Diazadiborininbildung ermöglichte die Isolierung eines Diazadiboretidinintermediats, welches durch doppelte Salzeliminierung entsteht. Dieses erwies sich jedoch als metastabil und lagerte zum Sechsring Diazadiborinin um. Quantenchemische Berechnungen unterstutzten die experimentellen Befunde. Über Kommutierungsreaktionen konnte eine Vielzahl an B,B‘-unsymmetrisch substituierten Diazadiborininen dargestellt und isoliert werden, wobei je nach verwendeten Startmaterialien entweder Gleichgewichtsreaktionen oder quantitative Umsetzungen beobachtet wurden. Ebenso wurde die Reaktivität der neuartigen Diazidodiborane(4) gegenüber Lewis-Basen untersucht. Sowohl das monocyclische Diazadiborinin, als auch das Benzodiazadiborinin konnten mit NHC-Basen zu den fünf verschiedenen Addukten umgesetzt werden. Unter thermischer Belastung wurde bei den monocyclischen Addukten eine Staudinger-artige Reaktion beobachtet, die unter Freisetzung von N2 zur Bildung von Guanadin-substituierten Diborane(4) führte. Die Benzodiazadiborininaddukte zeigten jedoch eine gänzlich andere Reaktivität. Hier fand eine Ringverkleinerungsreaktion unter Bildung von Diazaborolen statt, welche unter Wanderung einer Azidfunktion auf das NHC-stabilisierte Boratom gebildet wurden. Auf diese Weise konnten drei 1,1-Diamino-2,2-diazidodiborane(5) isoliert werden. Während bei der Umsetzung des Naphtalenderivats mit cAAC keine selektive Reaktion beobachtet wurde, reagierte das monocyclische Diazadiborinin mit zwei Äquivalenten cAAC. Hier bedingte das erste Carbon eine Staudinger-artige Reaktion, die unter Distickstofffreisetzung zu einem Formamidin führte. Die zweite Azidgruppe wurde am $\gamma$-Stickstoffatom von einem weiteren Äquivalent cAAC koordiniert. In weiteren Reaktivitätsstudien wurde die Generierung von transienten Iminoboranen aus Diazidodiazadiborininen untersucht. Die Diazide zeigten bei Temperaturen von über 150 °C ein sehr selektives Reaktionsverhalten und gingen unter Freisetzung von Distickstoff zu 1,3,2,4-Diazadiboretidin über, wobei dies über die Dimerisierung eines intermediär gebildeten siebengliedrigen, endocyclischen Iminoborans verlief. Der Mechanismus zur Bildung der transienten Iminoborane wurde anhand zweier möglicher Bildungswege mit quantenchemischen Methoden untersucht. Im letzten Kapitel wurde die Reaktivität des Dihydrodiazadiborinins gegenüber NHC- und cAAC-Lewis-Basen untersucht. Die Umsetzung mit cAAC führte zu einer B–H-Bindungsaktivierung durch das Carbenkohlenstoffatom, die vermutlich über eine Adduktspezies verläuft. Mit dem gesättigten NHC SIMes wurde ebenfalls keine Adduktbildung beobachtet, auch wenn ein derartiges Intermediat vermutlich durchlaufen wird. Als Produkt der Umsetzung wurde indes ein bicyclisches Molekül identifiziert, welches durch doppelte Ringerweiterung gebildet wurde. Mit ungesättigten NHCs wurden drei Addukte isoliert, welche jedoch nur metastabil waren und beim Erwärmen in bicyclische Verbindungen umlagerten. Die Umlagerungsprodukte konnten weiterhin durch Koordination eines weiteren Äquivalents IMe an die B–H-Funktionalität erneut zu Addukten umgesetzt werden. Die Bildung der zweier bicyclischer Verbindungen wurde ebenfalls mit quantenchemischen Methoden untersucht, wobei ein vierstufiger Prozess durchlaufen wird. Nach der Bildung des NHC-Addukts erfolgt die Übertragung eines Hydrids auf das Carbenkohlenstoffatom. Durch Insertion eines Boratoms in die NC-Bindung des Carbenrings wird eine Spiroverbindung gebildet und im letzten Schritt folgt die Spaltung der BB-Bindung durch Insertion des ehemaligen Carbenkohlenstoffatoms, was zur Bildung der Bicyclen führt. N2 - In the present work the synthesis, functionalization and reactivity of 1,4,2,3-diazadiborinines was investigated. Initially, bis(dimethylamino)-substituted diazadiborinines with different residues on the nitrogen atoms were to be synthesized, whose further functionalization was later in focus. The synthesis was performed by reduction of 1,4-diazabutadienes with elemental lithium and subsequent salt elimination reaction with B2(NMe2)2Cl2. Thus, the monocyclic four N,N'-diaryl-substituted diazadiborinines and one alkyl-substituted diazadiborinine could be prepared. By established methods of diborane(4) chemistry, these were converted into their halogen derivatives (Cl, Br, I). From these, three 2,3-diazido-1,4,2,3-diazadiborinines could be prepared by reaction with TMSN3 from the dihalogen derivatives. These represent the first isolated diborane(4)azide compounds. The synthesis of a bicyclic naphthalene isoster was also successful, which could again be successfully converted into its halogen derivatives as well as the diazdido derivative. An insight into the mechanism of 1,4,2,3-diazadiborinine formation was gained by isolating a diazadiboretidine intermediate, which is formed by double salt elimination. However, this proved to be metastable and rearranged to the six-membered ring of diazadiborinine. Quantum chemical calculations supported the experimental findings. Via commutation reactions, a large number of B,B'-unsymmetrically substituted diazadiborinines could be represented and isolated. Depending on the starting materials used, either equilibrium reactions or quantitative conversions were observed. The reactivity of the novel diazidodiboranes(4) to Lewis bases was also investigated. Both the monocyclic diazadiborinine and the benzodiazadiborinine could be converted with NHC bases to the five different adducts. Under thermal stress a Staudinger-like reaction was observed in the monocyclic adducts, which led to the formation of guanadine-substituted diboranes(4) with the release of N2. However, the benzodiazadiborinine adducts showed a completely different reactivity. Here, a ring reduction reaction took place with formation of diazaborols, which were formed by migration of an azide function to the NHC-stabilized boron atom. In this way, three 1,1-diamino-2,2-diazidodiboranes(5) could be isolated. While no selective reaction was observed during the reaction of the naphthalene derivative with cAAC, the monocyclic diazadiborinine reacted with two equivalents of cAAC. In this case, the first carbon caused a Staudinger-like reaction, which led to the release of dinitrogen to formamidine. The second azide group was coordinated at the $\gamma$ nitrogen atom by another equivalent cAAC. In further reactivity studies the generation of transient iminoboranes from diazidodiazadiborinines was investigated. The diazides showed a highly selective reaction behavior at temperatures above 150 °C and converted to 1,3,2,4-diazadiboretidine with the release of dinitrogen. This was achieved by dimerization of an intermediately formed seven-membered endocyclic iminoborane. The mechanism for the formation of the transient iminoboranes was investigated by quantum chemical methods on the basis of two possible formation pathways. In the last chapter the reactivity of dihydrodiazadiborinine towards NHC and cAAC Lewis bases were investigated. The reaction with cAAC resulted in B-H bond activation by the carbene carbon atom, which is thought to be via an adduct species. No adduct formation was observed with the saturated NHC SIMes either, although such an intermediate is likely to be passed through. However, a bicyclic molecule formed by double ring extension was identified as the product of the reaction. Three adducts were isolated with unsaturated NHCs, but they were only metastable and rearranged into bicyclic compounds upon heating. The rearrangement products were further converted back to adducts by coordinating another equivalent IMe to the B-H functionality. The formation of the two bicyclic compounds was also investigated by quantum chemical methods, whereby a four-step process is used. After formation of the NHC adduct, a hydride is transferred to the carbene carbon atom. By insertion of a boron atom into the NC bond of the carbene ring a spiro compound is formed and in the last step the BB bond is cleaved by insertion of the former carbene carbon atom, which leads to the formation of the bicycles. KW - Heterocyclische Verbindungen KW - Chemie KW - Elementorganik KW - Diazadiborinin Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-214598 ER - TY - THES A1 - He, Jiang T1 - Studies of N-heterocyclic olefins as donors in triarylboranes and electron-poor phenylpyridyl-fused boroles T1 - Studien N-heterozyklischer Olefine als Donoren in Triarylboranen und Elektronenarmer Phenylpyridyl-fusionierter Borole N2 - Chapter 1 N-Heterocyclic olefins (NHOs), relatives of N-heterocyclic carbenes (NHCs), exhibit high nucleophilicity and soft Lewis basic character. To investigate their π-electron donating ability, NHOs were attached to triarylborane π-acceptors (A) giving donor(D)-π-A compounds 1-3. In addition, an enamine π-donor analogue (4) was synthesized for comparison. UV-visible absorption studies show a larger red shift for the NHO-containing boranes than for the enamine analogue, a relative of a CAAC. The red shifted absorption of NHO-containing boranes indicate smaller energy gaps of NHO-containing boranes than CAAC-containing boranes. Solvent-dependent emission studies indicate that 1-4 have moderate intramolecular charge transfer (ICT) behavior. Electrochemical investigations reveal that the NHO-containing boranes have extremely low reversible oxidation potentials (e.g., for 3, E1/2ox = –0.40 V vs. Fc/Fc+ in THF) which indicate the electron rich property of NHOs. Furthermore, TD-DFT calculations were carried out on these four D-π-A boranes. The results show that the LUMOs of 1-4 only show a small difference, but the HOMOs of 1-3 are much more destabilized than that of the enamine-containing 4, which is in agreement with the electrochemical investigations and confirms the stronger donating ability of NHOs. Chapter 2 Since the beginning of this century, the chemistry of (hetero)arene-fused boroles has attracted increasing interest. (Hetero)arene-fused boroles exhibit strong Lewis acidity, distinct fluorescence properties, strong electron accepting abilities, etc. However, their chemistry been only very briefly reviewed either as part of reviews on “free” boroles or on boron-doped polycyclic aromatic hydrocarbons (PAHs). In this chapter, we addressed the chemistry of (hetero)arene-fused boroles from fundamentals to their widely varying applications. It includes: 1) Synthetic methodology  Both historical and recently developed strategies for the synthesis of fused boroles. 2) Stabilities  A comparison of different kinetic protection strategies. 3) 9-Borafluorenes with a fluorinated backbone  Application as Lewis acids, forming ion pairs with Cp2Zr(CH3)2 and applied as activators for polymerization, activators of H2, and other related applications. 4) Donor-acceptor 9-borafluorenes  Applications as F– “turn on” sensors, potential applications as electron accepting units for organic (opto)electronics, bipolar transporting materials, TADF materials, and different functionalization strategies. 5) Heteroarene-fused boroles  Enhanced antiaromaticity, unique coordination mode and their interesting properties. 6) Intramolecular dative bonding in 9-borafluorenes  Bond-cleavage-induced intramolecular charge transfer (BICT), BICT-induced large Stoke shifts and dual emissions, application as a ratiometric sensor. 7) 9-Borafluorene-based main chain polymers  Application in polymer chemistry and their distinct properties, e.g., as a sensor for gaseous NH3. 8) Electrochemistry  A comparison of electron-accepting ability of different functionalized fused boroles through electrochemical studies. 9) Chemical reduction of fused boroles  Stable radical anions and dianions of fused boroles and their properties. 10) Three-coordinate borafluorenium cations  Cationic 9-borafluorenes and their interesting properties, e.g., in THF, reversible thermal colour switching properties. Finally, a conclusion and outlook regarding the chemistry, properties and applications, and suggestions for areas which require further study was provided.   Chapter 3 Interested in fusing electron-poor arene onto boroles, two electron-poor phenylpyridyl-fused boroles, [TipPBB1]4 and TipPBB2 were prepared. [TipPBB1]4 is a white solid adopting a unique coordination mode, which forming a tetramer with a cavity in both the solid state and solution (1H DOSY). The boron center of TipPBB2 is 4-coordinate in the solid state, evidenced by a solid-state 11B{1H} RSHE/MAS NMR study, but the system dissociates in solution, leading to 3-coordinate borole species. [TipPBB1]4 exhibits two reduction processes which are attributed to the phenylpyridyl cores. TipPBB2 also exhibits two reduction processes with the first half-reduction potential of E1/2red = –1.94 V. The electron accepting ability of TipPBB2 is largely enhanced and comparable to that of FMesBf. This enhanced electron accepting ability is attributed to the electron withdrawing property of the pyridyl group. TipPBB2 exhibits concentration- and temperature-dependent dual fluorescence in solution. With the temperature is lowered, the emission intensity decreases (Figure 6.4, left). We suggested that the dual fluorescence is caused by an equilibrium between 3-coordinate TipPBB2 and a weak intermolecular adduct of TipPBB2 via a B–N bond. This hypothesis was further supported by lifetime measurements at different concentrations, low temperature excitation spectra low temperature 1H NMR spectra and lifetime measurements upon addition of DMAP to a solution of TipPBB2 to simulate the 4-coordiante TipPBB2 species. Interestingly, the ratio of the relative percentages of the two lifetimes shows a linear relationship with temperature; thus, TipPBB2 could serve as a fluorescent thermometer. Furthermore, theoretical studies were carried out on TipPBB2, and two models, ((BMe3)TipPBB1(NMe3) and (BMe3)TipPBB2(NMe3)), which utilize a BMe3 group as the Lewis acid coordinated to pyridine and an NMe3 group as the Lewis base coordinated to the boron center of the borole, were used to simulate the [TipPBB1]4 and intermolecular 4-coordinate TipPBB2, respectively. Theoretical studies indicate that the HOMO of TipPBB2 is located at the Tip group, which is in contrast to its borafluorene derivatives for which the HOMOs are located on the borafluorene cores. Chapter 4 Two derivatives of phenylpyridyl-fused boroles were prepared via functionalization of the pyridyl groups in two different directions, namely an electron-rich dihydropyridine moiety (compound 10) and an electron-deficient N-methylpyridinium cation (compound 11). Both compounds were fully characterized. The 11B NMR signal of compound 10 was observed at 58.8 ppm in CDCl3, which suggests strong conjugation between the boron atom and dihydropyridine moiety. Compound 11 shows a reversible coordination to THF which was confirmed by NMR studies. Compared to other 2,4,6-triisopropylphenyl protected 9-borafluorenes which only coordinate to CH3CN or DMF, the coordination of the weaker and bulkier THF to compound 11 indicates an extremely electron-deficient boron center in compound 11. The electron-rich property of the dihydropyridine moiety of compound 10 was confirmed by its oxidation potential (Epc = +0.37 V). Due to the strong conjugation of the dihydropyridine moiety with the boron atom, the reduction potential of compound 10 shifts cathodically and is more negative than –2.5 V. Compound 11 exhibits three reduction processes with the first reversible reduction potential at Ered1/2 = –1.23 V, which is significantly anodically shifted compared to that of its precursor (TipPBB2) or its framework 1-methyl-2-phenylpyridin-1-ium triflate (12). This significantly anodically shifted reduction potential confirms an extremely electron-deficient property of compound 11. Photophysical studies indicate that the lowest energy transition of compound 10 is more likely a locally-excited (LE) transition and compound 11 exhibits a polarized ground state. Furthermore, we performed theoretical studies for both compounds. The electron cloud distribution of the HOMO of compound 10 supports the strong conjugation between the boron atom and the dihydropyridine moiety in the ground state. An extremely low LUMO energy was determined by theoretical studies which confirmed the extremely electron-deficient property of compound 11.   Chapter 5 Inspired by the enhancement of electron accepting ability with increasing numbers of electron withdrawing groups at boron, we tried to study the properties of a bis(pyridyl)arylboranes. In our attempt to synthesize a bis(pyridyl)arylborane, we obtained a bis(2-pyridyl)methoxyborate Li+ complex which is as a dimer both in solution and the solid state. In the solid state, compound [16]2 is a dimer containing two bis(2-pyridyl)methoxyborate which are linked by two lithium cations. Each lithium cation coordinates to one methoxy group and two pyridyl groups, one from each of the two bis(2-pyridyl)methoxyborate anions. The parameters of [16]2 were compared with other bis(2-pyridyl)methoxyborate stabilized Pt(IV) complex, bis(2-pyridyl)hydroxylborate stabilized Ru(II) complex and the dimer of EtAl(OMe)(2-pyridyl)2Li. To confirm the coordination mode in solution, 1H DOSY spectroscopy was carried out in CD2Cl2. The van der Waals radius obtained by 1H DOSY nicely matches with the result from the solid state and thus proves the dimer of 16 is persistent in solution. Finally, different Lewis acids (e.g., TMSCl, BF3•Et2O, AlCl3, HCl) were used to attempt to detach the methoxy group of [16]2. However, we observed either decomposition or selective cleavage of the Tip group, or no reaction at all, rather than cleavage of the methoxy group from boron. N2 - 1 Kapitel 1 N-Heterocyclische Olefine (NHOs) sind Verwandte der N-heterocyclischen Carbene (NHCs) und weisen eine hohe Nukleophilie sowie einen weichen Lewis-Grundcharakter auf. Um ihre Fähigkeit als π-Elektronendonor zu untersuchen, wurden diese NHOs an π-Triarylboran-Akzeptoren (A) gebunden, wodurch die Donor(D)-π-A-Verbindungen 1-3 erhalten wurden. Zusätzlich wurde zum Vergleich das Enamin π-Donoranalogon (4) synthetisiert. Studien zur UV/Vis-Absorption zeigen für die NHO-haltigen Borane eine stärkere Rotverschiebung als für das Enamin-Analogon, welches ein Verwandter von CAACs ist. Die rotverschobene Absorption der NHO-haltigen Borane weist auf kleinere Energielücken bei den NHO-haltigen Boranen als bei den CAAC-haltigen Boranen hin. Des Weiteren zeigen Lösungsmittel-abhängige Emissionsstudien, dass die Verbindungen 1-4 ein moderates intramolekulares Ladungstransfer(ICT)-Verhalten aufweisen. Elektrochemische Untersuchungen zeigen, dass die NHO-haltigen Borane extrem niedrige reversible Oxidationspotentiale aufweisen (z.B. für 3, E1/2ox = –0,40 V vs. Fc/Fc+ in THF), was auf die elektronenreiche Eigenschaft der NHOs hinweist. Darüber hinaus wurden TD-DFT-Berechnungen für diese vier D-π-A-Borane durchgeführt. Die Ergebnisse zeigen, dass die jeweiligen LUMOs von 1-4 nur einen geringen Unterschied zueinander aufweisen, die HOMOs von 1-3 jedoch viel stärker destabilisiert sind als die des enaminhaltigen 4, was mit den elektrochemischen Untersuchungen übereinstimmt und die stärkere Donorfähigkeit der NHOs bestätigt. 2 Kapitel 2 Seit Beginn dieses Jahrhunderts hat die Chemie von (Hetero)aren-kondensierten Borolen zunehmendes Interesse geweckt. (Hetero)aren-kondensierte Borole weisen eine starke Lewis-Acidität, ausgeprägte Fluoreszenzeigenschaften, starke Elektronenakzeptor-fähigkeiten, etc. auf. Ihre Chemie wurde jedoch bislang nur wenig untersucht und es gibt kaum Übersichten zu ihren Eigenschaften, entweder als Teil von Übersichtsarbeiten über "freie" Borole oder über bordotierte polyzyklische aromatische Kohlenwasserstoffe (PAK). In diesem Kapitel wird die Chemie von (Hetero)aren-kondensierten Borolen von den Grundlagen bis zu ihren sehr unterschiedlichen Anwendungen behandelt. Es umfasst: 1) Synthetische Methoden  Sowohl historische als auch kürzlich entwickelte Strategien für die Synthese von kondensierten Borolen. 2) Stabilitäten  Ein Vergleich verschiedener kinetischer Schutzstrategien. 3) 9-Borafluorene mit fluoriertem Rückgrat  Anwendung als Lewis-Säure, Bildung von Ionenpaaren mit Cp2Zr(CH3)2 und Anwendung als Aktivatoren für die Polymerisation, Aktivatoren von H2 und andere verwandte Anwendungen. 4) Donor-Akzeptor 9-Borafluorene  mögliche Anwendungen als F– "Einschalt"-Sensoren, als elektronenakzeptierende Einheit für die organische (Opto-)Elektronik, bipolare Transportmaterialien, TADF-Materialien und verschiedene Funktionalisierungsstrategien. 5) Heteroaren-kondensierte Borole  Gesteigerte Antiaromatizität, einzigartiger Koordinationsmodus und interessante Eigenschaften. 6) Intramolekulare dative Bindung in 9-Borafluorenen  Bindungsbruch-induzierter intramolekularer Ladungstransfer (BICT), BICT-induzierte große Stokes-Verschiebungen und duale Emissionen, Anwendung als ratiometrischer Sensor. 7) 9-Borafluoren-basierte Hauptkettenpolymere  Anwendung in der Polymerchemie und deren charakteristische Eigenschaften, z.B. als Sensoren für gasförmiges NH3. 8) Elektrochemie  Ein Vergleich der Elektronenakzeptorfähigkeit unterschiedlicher funktionalisierter kondensierter Borole durch elektrochemische Untersuchungen. 9) Chemische Reduktion von kondensierten Borolen  Stabile Radikalanionen und Dianionen von kondensierten Borolen und deren Eigenschaften. 10) Dreifach koordinierte Borafluorenium-Kationen  Kationische 9-Borafluorene und ihre spannenden Eigenschaften, wie z.B. die reversible thermische Schaltbarkeit durch Farbe in THF. Am Ende des Kapitels werden Schlussfolgerungen gezogen und ein Ausblick zur weiteren Chemie, etwaigen Eigenschaften sowie möglichen Anwendungen gegeben. Ferner werden Vorschläge zu Feldern gemacht, die weitere Untersuchungen bedürfen. 3 Kapitel 3 Um elektronenarme Arene mit Borolen zu kondensieren, wurden zwei elektronenarme Phenylpyridyl-kondensierte Borole, [TipPBB1]4 und TipPBB2, hergestellt. [TipPBB1]4 ist ein weißer Feststoff, der einen einzigartigen Koordinationsmodus aufweist. Sowohl im Festkörper als auch in Lösung (1H DOSY) liegt ein Tetramer mit einem Hohlraum vor. Das Borzentrum von TipPBB2 ist im Festkörper 4-fach koordiniert, was durch ein Festkörper 11B{1H} nachgewiesen wurde. RSHE/MAS-NMR-Studien zeigten aber, dass das System in Lösung dissoziiert, was zu einer 3-fach koordinierten-Borolspezies führt. [TipPBB1]4 zeigt zwei Reduktionsprozesse, die den Phenylpyridylkernen zugeschrieben werden. TipPBB2 zeigt ebenfalls zwei Reduktionsprozesse mit dem ersten Halb- Reduktionspotential von E1/2red. = –1,94 V. Die Elektronenakzeptorfähigkeit von TipPBB2 ist somit weitgehend verbessert und mit der von FMesBf vergleichbar. Diese verbesserte Elektronenakzeptorfähigkeit ist auf den elektronenziehenden Effekt der Pyridylgruppe zurückzuführen. TipPBB2 zeigt konzentrations- und temperaturabhängige duale Fluoreszenz in Lösung. Mit sinkender Temperatur nimmt die Emissionsintensität ab. Es liegt die Vermutung nahe, dass die duale Fluoreszenz durch ein Gleichgewicht zwischen 3-fach koordinierten-TipPBB2 und einem schwachen intermolekularen Addukt von TipPBB2 über eine B–N-Bindung verursacht wird. Diese Hypothese wurde durch Lebenszeitmessungen bei verschiedenen Konzentrationen, Niedrigtemperatur-Anregungsspektren, Niedrigtemperatur-1H-NMR-Spektren und Lebenszeitmessungen nach Zugabe von DMAP zu einer Lösung von TipPBB2 zur Simulation der 4-fach koordinierten-TipPBB2-Spezies weiter untermauert. Interessanterweise zeigt das Verhältnis der relativen Prozentsätze der beiden Lebenszeiten eine lineare Beziehung mit der Temperatur; daher könnte TipPBB2 als Fluoreszenzthermometer dienen. Darüber hinaus wurden theoretische Studien zu TipPBB2 durchgeführt und zwei Modellverbindungen ((BMe3)TipPBB1(NMe3) und (BMe3)TipPBB2(NMe3)) wurden untersucht, um [TipPBB1]4 bzw. das intermolekular-4-fach koordinierte TipPBB2 zu simulieren. Die BMe3-Gruppe koordiniert als Lewis-Säure an Pyridin und die NMe3-Gruppe als Lewis-Base an das Borzentrum des Borols. Die theoretischen Studien weisen darauf hin, dass das HOMO von TipPBB2 an der Tip-Gruppe lokalisiert ist, was im Gegensatz zu den entsprechenden Borafluoren-Derivaten steht, bei denen sich die HOMOs auf den Borafluoren-Kernen befinden. 4 Kapitel 4 Zwei Derivate von Phenylpyridyl-kondensierten Borolen wurden durch Funktionalisierung der Pyridylgruppe an zwei unterschiedlichen Positionen hergestellt, zum einen eine elektronenreiche Dihydropyridin-Einheit (Verbindung 10) und zum anderen ein elektronenarmes N-Methylpyridinium-Kation (Verbindung 11). Beide Verbindungen wurden vollständig charakterisiert. Das 11B-NMR-Signal von Verbindung 10 wurde bei 58,8 ppm in CDCl3 beobachtet, was auf eine starke Konjugation zwischen dem Boratom und der Dihydropyridin-Einheit schließen lässt. Verbindung 11 zeigt eine reversible Koordination zu THF, was durch NMR-Studien bestätigt wurde. Im Vergleich zu anderen 2,4,6-Triisopropylphenyl-geschützten 9-Borafluorenen, die nur an CH3CN oder DMF koordinieren, weist die Koordination des schwächeren und voluminöseren THF zu Verbindung 11 auf ein extrem elektronenarmes Borzentrum in Verbindung 11 hin. Der Elektronenreichtum der Dihydropyridin-Einheit von Verbindung 10 wurde durch sein Oxidationspotential (Epc = +0,37 V) bestätigt. Aufgrund der starken Konjugation des Dihydropyridinteils mit dem Boratom verschiebt sich das Reduktionspotential von Verbindung 10 kathodisch und ist negativer als –2,5 V. Verbindung 11 zeigt drei Reduktionsprozesse mit dem ersten reversiblen Reduktionspotential bei Ered1/2 = –1,23 V, das im Vergleich zu dem der Vorstufe (TipPBB2) oder ihres Gerüstes 1-Methyl-2-phenylpyridin-1-ium-Triflat (12) signifikant anodisch verschoben ist. Dieses signifikant anodisch verschobene Reduktionspotential bestätigt das Elektronendefizit von Verbindung 11. Photophysikalische Studien zeigen, dass der niedrigste Energieübergang von Verbindung 10 eher ein lokal angeregter (LE) Übergang ist und Verbindung 11 einen polarisierten Grundzustand aufweist. Darüber hinaus wurden für beide Verbindungen theoretische Studien durchgeführt. Die Elektronenverteilung des HOMO von Verbindung 10 belegt die starke Konjugation zwischen dem Boratom und der Dihydropyridin-Einheit im Grundzustand. Eine sehr niedrige LUMO-Energie wurde durch theoretische Studien ermittelt, die das Elektronendefizit von Verbindung 11 bestätigt. 5 Kapitel 5 Inspiriert durch die zunehmende Elektronenakzeptorfähigkeit mit wachsender Anzahl elektronenziehender Gruppen am Boratom versuchten wir, die Eigenschaften eines Bis(pyridyl)arylborans zu untersuchen. Bei unserem Versuch, ein Bis(pyridyl)arylboran zu synthetisieren, erhielten wir jedoch einen Bis(2-pyridyl)methoxyborat-Li+-Komplex, der als Dimer sowohl in Lösung als auch im festen Zustand vorliegt. Im Festkörper ist die Verbindung [16]2 ein Dimer, das zwei Bis(2-pyridyl)methoxyborat-Einheiten enthält welche durch zwei Lithiumkationen verbunden sind. Jedes Lithiumkation koordiniert an eine Methoxygruppe und an zwei Pyridylgruppen, jeweils eine von jedem der beiden Bis(2-pyridyl)methoxyborat-Anionen. Die Parameter von [16]2 wurden mit anderen Bis(2-pyridyl)methoxyborat-stabilisierten Pt(IV)-Komplexen, Bis(2-pyridyl)hydroxylborat-stabilisierten Ru(II)-Komplexen und dem Dimer von EtAl(OMe)(2-pyridyl)2Li verglichen. Um den Koordinationsmodus in Lösung zu bestätigen, wurde eine 1H-DOSY-Studie in CD2Cl2 durchgeführt. Der aus den Daten ermittelte van-der-Waals-Radius stimmt gut mit dem Ergebnis aus den Festkörperuntersuchungen überein und beweist somit, dass das Dimer von 16 in Lösung persistent ist. Schließlich wurde mit verschiedenen Lewis-Säuren (z.B. TMSCl, BF3•Et2O, AlCl3, HCl) versucht, die Methoxygruppe von [16]2 abzuspalten. Wir beobachteten jedoch entweder eine Zersetzung oder selektive Abspaltung der Tip-Gruppe oder gar keine Reaktion und nicht die Abspaltung der Methoxy-Gruppe von Bor. KW - Triarylborane KW - Borole KW - Pyridinderivate KW - Heterocyclische Verbindungen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-217175 ER - TY - JOUR A1 - Braunschweig, Holger A1 - Constantinidis, Philipp A1 - Dellermann, Theresa A1 - Ewing, William A1 - Fischer, Ingo A1 - Hess, Merlin A1 - Knight, Fergus A1 - Rempel, Anna A1 - Schneider, Christoph A1 - Ullrich, Stefan A1 - Vargas, Alfredo A1 - Woolins, Derek T1 - Highly Strained Heterocycles Constructed from Boron–Boron Multiple Bonds and Heavy Chalcogens JF - Angewandte Chemie, International Edition N2 - The reactions of a diborene with elemental selenium or tellurium are shown to afford a diboraselenirane or diboratellurirane, respectively. These reactions are reminiscent of the sequestration of subvalent oxygen and nitrogen in the formation of oxiranes and aziridines; however, such reactivity is not known between alkenes and the heavy chalcogens. Although carbon is too electronegative to affect the reduction of elements with lower relative electronegativity, the highly reducing nature of the B B double bond enables reactions with Se0 and Te0. The capacity of multiple bonds between boron atoms to donate electron density is highlighted in reactions where diborynes behave as nucleophiles, attacking one of the two Te atoms of diaryltellurides, forming salts consisting of diboratellurenium cations and aryltelluride anions. KW - Boron KW - Heterocycles KW - Multiple bonds KW - Selenium KW - Tellurium KW - Bor KW - Heterocyclische Verbindungen KW - Selen KW - Tellur Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138237 N1 - This is the peer reviewed version of the following article: Angew. Chem. Int. Ed. 2016, 55, 5606–5609, which has been published in final form at 10.1002/anie.201601691. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. N1 - Accepted Version VL - 55 IS - 18 SP - 5606 EP - 5609 ER - TY - THES A1 - Brede, Franziska Andrea T1 - Synthesestrategien und Struktur-Eigenschafts-Beziehungen anorganisch-organischer Hybridmaterialien basierend auf 3d-Übergangsmetallchloriden und N-heterozyklischen Liganden T1 - Synthesis strategies and structure-property relations of inorganic-organic hybrid materials based on 3d-transition metal chlorides and N-heterocyclic ligands N2 - Die vorliegende Arbeit umfasst die Synthese, die Untersuchung von Struktur-Eigenschafts-Beziehungen und Eigenschaftsmodifikationen von Komplexen und Koordinationspolymeren basierend auf den 3d-Übergangsmetallchloriden von Mn, Fe, Co sowie Zn und N-heterozyklischen Liganden. Durch die Kombination von mechanochemische Umsetzungen, mikrowellenassistierten Synthesen, solvensassistierten, solvothermalen und solvensfreien Reaktionen zu verschiedenen Synthesestrategien wurden 23 neue Koordinationsverbindungen synthetisiert und charakterisiert. Ausgehend von den auf mechanochemischem Weg synthetisierten, monomeren Precursor-Komplexen [MCl2(TzH)4] (M = Mn und Fe) konnten die höhervernetzten Koordinationspolymere 1∞[FeCl(TzH)2]Cl und 1∞[MCl2(TzH)] (M = Fe und Mn) durch thermische und mikrowelleninduzierte Konversionsreaktionen als phasenreine Bulkprodukte erhalten werden. Die sukzessive Abgabe organischer Liganden und die damit verbundene Umwandlung in die höhervernetzten Spezies wurden dabei mittels temperaturabhängiger Pulverdiffraktometrie und simultanem DTA/TG-Verfahren analysiert. Durch gezielte Variation der Lösungsmittel beim Liquid-assisted grinding, der mechanochemischen Synthese unter Zugabe einer flüssigen Phase, konnten die beiden polymorphen Koordinationspolymere α-1∞[MnCl2(BtzH)2] und β-1∞[MnCl2(BtzH)2] erhalten werden, die im monoklinen bzw. orthorhombischen Kristallsystem kristallisieren. Solvensassistierte Umsetzungen von MnCl2 mit 1,2,4-1H-Triazol (TzH) unter Zugabe von Hilfsbasen resultierten unter anderem in der Bildung der dreidimensionalen Koordinationspolymere 3∞[MnCl(Tz)(TzH)] und 3∞{[Mn5Cl3(Tz)7(TzH)2]}2·NEt3HCl. Die Untersuchung von Struktur-Eigenschafts-Korrelationen erfolgte systematisch an ausgewählten Verbindungen hinsichtlich ihrer dielektrischen Eigenschaften. Dabei wurden die Einflüsse intra- und intermolekularer Wechselwirkungen auf die strukturelle Rigidität und die daraus folgenden Polarisierbarkeitseigenschaften analysiert und miteinander verglichen. Die gemessenen dielektrischen Konstanten erstrecken sich von Werten im high-k-Bereich für monomere Komplexe bis hin zu den nahezu frequenzunabhängigen low-k-Werten der eindimensionalen Koordinationspolymere 1∞[MnCl2(TzH)] und 1∞[MnCl2(BtzH)2] sowie der Komplexe [ZnCl2(TzH)2] und [ZnCl2(BtzH)2]·BtzH. Eigenschaftsmodifikationen und -optimierungen der synthetisierten Verbindungen er-folgten zum einen durch Erzeugung flexibler Kunststofffilme, in welche die eindimensionalen Koordinationspolymere 1∞[MCl2(TzH)] (M = Fe und Mn) eingebettet wurden. Zum anderen konnten in mechanochemischen Umsetzungen superparamagnetische Kompositpartikel bestehend aus einem Fe3O4/SiO2-Kern und einer kristallinen [ZnCl2(TzH)2]-Hülle erhalten werden, die in situ aus den Edukten ZnCl2 und TzH synthetisiert wurde. N2 - This thesis deals with the synthesis, the investigation of structure-property-relations and property modifications of complexes and coordination polymers based on 3d-transition metal chlorides of Mn, Fe, Co and Zn and N-heterocyclic ligands. The combination of different synthesis strategies including mechanochemistry, micro-wave-assisted reactions, solvothermal, solvent-assisted and solvent-free approaches results in the formation and characterization of 23 new coordination compounds. The utilization of the mechanochemically synthesized, monomeric complexes [MCl2(TzH)4] (M = Mn and Fe) as precursors yield the higher dimensional coordination polymers 1∞[FeCl(TzH)2]Cl and 1∞[MCl2(TzH)] (M = Fe and Mn) as phase-pure bulk products by thermal or microwave-induced conversion reactions. The stepwise release of organic ligands and the formation of the high-temperature species was monitored and determined via temperature-dependent powder diffraction as well as simultaneous DTA/TG analysis. Depending on the utilized solvent, liquid-assisted grinding of MnCl2 and BtzH leads to the formation of the two polymorphous coordination polymers α-1∞[MnCl2(BtzH)2] and β-1∞[MnCl2(BtzH)2], crystallizing either in the orthorhombic or in the monoclinic crystal system. Solvothermal reactions of MnCl2 and 1,2,4-1H-triazole (TzH) with additional amounts of assistant bases exhibit the two three-dimensional coordination poly-mers 3∞[MnCl(Tz)(TzH)] and 3∞{[Mn5Cl3(Tz)7(TzH)2]}2·NEt3HCl. The investigation of structure-property-correlations was carried out systematically by determining the dielectric properties of selected compounds. The influences of intra- and intermolecular interactions on the structural rigidity and the resulting polarizabil-ity were investigated. The dielectric constants range from high-k values for monomeric complexes to almost frequency-independent low-k values for the one-dimensional co-ordination polymers 1∞[MnCl2(TzH)] and 1∞[MnCl2(BtzH)2] as well as the complexes [ZnCl2(TzH)2] and [ZnCl2(BtzH)2]·BtzH. On the one hand, modifications of the compounds' properties were achieved by em-bedding the coordination polymers 1∞[MCl2(TzH)] (M = Fe and Mn) in flexible plastic films. On the other hand, via mechanochemical approaches, a superparamagnetic com-posite material was obtained by in situ formation of the crystalline complex [ZnCl2(TzH)2] (3) on Fe3O4/SiO2 microparticle cores. KW - Komplexe KW - Mechanochemie KW - Mikropartikel KW - Heterocyclische Verbindungen KW - Übergangsmetallchloride KW - Thermische Konversion KW - Organisch-anorganischer Hybridwerkstoff KW - Koordinationsverbindung KW - Struktur-Eigenschafts-Beziehung KW - Permittivität Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138146 ER - TY - THES A1 - Mailänder, Lisa T1 - Darstellung neuer Borheterocyclen durch Umsetzung von Borolen mit 1,3-dipolaren Reagenzien T1 - Synthesis of new boron heterocycles by reaction of boroles with 1,3-dipolar reagents N2 - Darstellung neuer Borheterocyclen durch Umsetzung von Borolen mit 1,3-dipolaren Reagenzien. Bei der Usetzung von Borolen mit Aziden, Diazoalkanen und Nitronen kam es zu Ringerweiterungsreaktionen und zur Bildung von neuen Borheterocyclen (z.B. 1,2-Azaborinine, 1,2-Azaborinin-substituierte Azofarbstoffe, Boracyclohexadiene, Oxazaborocine). N2 - Synthesis of new boron heterocycles by reaction of boroles with 1,3-dipolar reagents KW - Borole KW - Heterocyclische Verbindungen KW - Dipol <1,3-> KW - Ringerweiterungsreaktionen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-127147 ER -