TY - THES A1 - Weckwerth, Felix T1 - Antibiotikafreisetzung und Klebefestigkeit modifizierter PMMA Knochenzemente T1 - Antibiotic release and bonding strength of modified PMMA bone cements N2 - Im Rahmen dieser Arbeit wurden zwei modifizierte Knochenzemente auf ihre Klebefestigkeit und Antibiotikafreisetzung untersucht und mit dem herkömmlichen Biomet Bone Cement verglichen. Beiden Modifikationen wurde Hydroxyethylmethacrylat-Phosphat (HEMA-P) untergemischt. Die eine Modifikation war zusätzlich mit Natriumcarbonat und Calciumchlorid beladen. Der mit HEMA-P, Natriumcarbonat und Calciumchlorid modifizierte Knochenzement erreichte initial lediglich 85 Prozent der Zug- und 81 Prozent der Zugscherkräfte des Biomet Bone Cements. Nach einem künstlichem Alterungsprozess lagen die Zug- und Zugscherkräfte auch deutlich unter denen des Vergleichszementes. Allerdings konnte bei diesem Zement eine große Abgabemenge von Antibiotikum festgestellt werden. Diese lag nach Ablauf von 3 Wochen bei Gentamicin etwa zweifach und bei Vancomycin um den Faktor 25 über der Menge, die der Biomet Bone Cement freisetzte. Die Klebefestigkeit und Antibiotikaabgabewerte des mit HEMA-P modifizierten Zementes ähnelten den Werten des Biomet Bone Cementes N2 - The aim of the study was to examine two modified bone cements on its tensile strength and antibiotic release. Both cements were modified with Hydroxyethylmethacrylat phosphate (HEMA-P), the one modification was additionally loaded with Natriumcarbonat and calcium chloride. With HEMA-P, Natriumcarbonat and calcium chloride modified bone cement reached initially only 85 per cent of the tensile strength of the conventional Biomet Bone Cements. After an artificial aging process the tensile strength was also clearly under those of the comparison cement. However a large delivery quantity of antibiotic could be determined with this cement. This lay at expiration of 3 weeks with Gentamicin about doubly and with Vancomycin around the factor 25 over the quantity, which the Biomet Bone Cement set free. The tensile strength and antibiotic release of the cement modified with HEMA-P resembled the values of the Biomet Bone Cementes. KW - Knochenzement KW - PMMA KW - Antibiotikafreisetzung KW - antibiotic release KW - bone cement KW - tensile strength Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-38943 ER - TY - THES A1 - Lehnert, Teresa T1 - Biomechanische Eigenschaften von Knochenersatz und Schraubenosteosynthese in der Stabilisierung von Tibiakopffrakturen bei Osteoporose T1 - Biomechanical characteristics of bone substitute and screw osteosynthesis in stabilization of tibial depression fractures in osteoporotic bones N2 - Das Ziel dieser Arbeit war die Untersuchung eines neuen bohrbaren Kalziumphosphatzements (Norian drillable Synthes GmbH) sowohl als alleiniges Knochenersatzmaterial als auch in Kombination mit Schrauben, die in Jail-Technik angebracht wurden bei der Versorgung von lateralen Tibiakopfimpressionsfrakturen. Laterale Tibiakopfimpressionsfrakturen wurden dafür in einem biomechanischen Frakturmodell künstlich erzeugt. Die Präparate wurden mit Knochenersatzmaterial (Gruppe 1), Knochenersatzmaterial mit zusätzlichen vier Schrauben in Jail-Technik (Gruppe 2) oder lediglich mit vier Schrauben (Gruppe 3) stabilisiert. Anschließend wurde das Einsinken des Knochens (Displacement) unter zyklischer Belastung sowie Steifigkeit und Maximalbelastung in load-to-failure-Tests ermittelt. Die Gruppen, die mit Knochenersatzmaterial versorgt wurden, zeigten unter zyklischer Belastung ein geringeres Displacement und eine höhere Steifigkeit. Die Maximalbelastung, der die Knochen in der Load-to-failure-Testung standhielten, war indes höher für die Gruppen, die mit Schrauben versorgt wurden. Fazit: Die Kombination aus Unterfütterung mit Knochenersatzmaterial und Stabilisierung mit Schrauben bietet die umfangreichste Versorgung bei lateralen Tibiakopfimpressionsfrakturen. N2 - The aim of this study was to investigate a new drillable calcium phosphate cement (Norian drillable Synthes GmbH) as a bone substitute either alone or in combination with screws in the jail technique with regard to the primary stability in lateral tibial depression fractures. Lateral depression fractures of the tibial plateau were created in a biomechanical fracture model. After reduction they were stabilised with bone substitute (group one), bone substitute with additional four screws in the jail technique (group two) or four screws only (group three). Displacement under cyclic loading, stiffness and maximum load in load-to-failure tests were determined. The groups with the bone substitute showed a lower displacement of the depressed articular fragment under cyclical loading and a higher stiffness. The maximum load was higher for the groups with screws. Conclusions: Only the combination of bone substitute and screws prevented secondary loss of reduction and, at the same time, provided enough stability under maximum load. KW - Tibiaplateau KW - Tibiakopfbruch KW - Knochenzement KW - Tibiakopfimpressionsfraktur Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-98362 ER - TY - THES A1 - Heilig, Philipp T1 - Biomechanische Evaluation neuartiger Knochenersatzmaterialien zur Therapie der Tibiakopfimpressionsfraktur T1 - Biomechanical evaluation of new bone substitutes for the therapy of tibial head depression fractures N2 - Tibiakopfimpressionsfrakturen (AO 41-B2.2 – Schatzker III), welche aufgrund der demographischen Entwicklung in ihrer klinischen Relevanz zunehmen, erfordern zur bestmöglichen Frakturstabilisierung eine Schraubenosteosynthese sowie eine stabile metaphysäre Defektauffüllung mittels Knochenersatzmaterial, da anderenfalls ein sekundärer Repositionsverlust mit konsekutiver Gonarthrose droht. Die hierbei eingesetzten Kalziumphosphatzemente bringen klinische Probleme wie geringe mechanische Stabilität, fehlende Bohrbarkeit, welche eine unvollständige Defektauffüllung bedingt, ungewisse Resorption und unüberprüfte Herstellerangaben mit sich. Diese Studie hatte daher zum Ziel, einen bohrbaren Kalziumphosphatzement und einen Magnesiumphosphatzement, welche als vielversprechende Alternativen aufgrund der klinischen Schwierigkeiten erscheinen, gegen Graftys® Quickset und ChronOS™ Inject biomechanisch einzuordnen und somit langfristig zu einer verbesserten Frakturversorgung beizutragen. Der erste Teil der Studie bestand aus einer reinen Materialprüfung, in der mittels Zementquader Druckversuche und mittels Ausrisskörper Zugversuche durchgeführt wurden. Im zweiten Teil wurde ein Frakturmodell für Impressionsfrakturen an Kunstknochen benutzt, um die Zemente hierbei zur Defektauffüllung zu verwenden und alleine sowie in Kombination mit einer Osteosynthese in der Jail-Technik zu testen. Es erfolgte eine zyklische Belastung mit 3000 Zyklen zu je 250 N sowie anschließend eine Maximalkrafttestung (Load-To-Failure) mit Hilfe einer Materialprüfmaschine. Der Magnesiumphosphatzement zeigte die signifikant höchste Kompressionsfestigkeit von 100,50 MPa ± 15,97 MPa und Ausrisskraft sowie im Verbund mit Knochen das geringste Displacement, höchste Maximalkraft und Steifigkeit. Kalziumphosphat bohrbar wies aufgrund seines pseudoplastischen Verhaltens eine geringe biomechanische Stabilität und ein hohes Displacement auf, konnte aber durch seine Bohrbarkeit gegenüber Graftys® Quickset bei Einsatz mit Schrauben einen Vorteil im Displacement erreichen und somit die Vorzüge eines bohrbaren Knochenzements aufzeigen. ChronOS™ zeigte nach Aushärtung im Wasserbad mit einer Kompressionsfestigkeit von 0,58 MPa ± 0,14 MPa eine niedrige biomechanische Stabilität und wurde daher nicht weiter untersucht. Da die Viskosität eines Zements neben anderen Faktoren für die Interdigitation mit den Spongiosahohlräumen im Knochen verantwortlich ist, lässt sich, sofern diese angemessen ist, Rückschlüsse von der Materialprüfung auf das Verhalten im Knochen ziehen. Magnesiumphosphatzemente erscheinen aufgrund ihrer hohen biomechanischen Stabilität und vermutlich guten Resorptionsrate als vielversprechende Alternative zu herkömmlichen Kalziumphosphatzementen und bedürfen daher einer weiteren Überprüfung im Tierversuch. N2 - Bone substitutes are commonly used for filling up bone defects like in tibial head fractures. Different types of commercial bone substitutes are available, but comparable biomechanical studies especially analysing the substitute-bone interaction are missing. Thus, this study investigated the basic biomechanical characteristics of different bone substitutes, the bonesubstitute interface and the combination of substitute and screw osteosynthesis in a biomechanical fracture model for tibial head fractures (Schatzker III fractures). An in-house developed drillable apatite cement with HEMA-Hydrogel and an in-house developed magnesium phosphate cement were compared with two commercial cements, one brushite and one apatite cement, namely ChronOS™ Inject and Graftys® Quickset. In axial compression tests, the compressive strength and in screw pull-out tests, the pull-out strength were determined. In a tibial head fracture model, the bone substitutes were applied for filling up the bone defect, alone and in combination with a screw osteosynthesis. Displacement of the fracture fragment, maximum load and stiffness were calculated in cyclic and maximal axial loading tests. All tests were performed in the material testing machine Zwick Roell® Z020. The drillable apatite cement exhibited lower compressive strength (6.8±1.4 MPa) and screw pullout force (129±38 N) compared to its counterpart Graftys® (19.0±2.5 MPa, 295±39 N), but showed comparable displacement (~2 mm) and maximum load (3.5-3.8 kN) in the fracture model combined with the Jail-Technique. This may be due to the fact that the drillable cement allowed for drilling after replenishment and thus precise dispersion of the cement paste. The magnesium phosphate cement revealed a significant higher compressive strength (100.5±16.0 MPa), screw pull-out strength (1.7±0.2 kN) and a significant lower displacement (~1.5 mm) compared to the other bone substitutes. Probably due to its high intrinsic strength combined with a low viscosity to fill the complete defect. For the combination with screws, all bone substitutes revealed higher maximum loads and stiffness values. In conclusion, magnesium phosphate cement provided a high biomechanical stability in the pure material testing series and also in the substitute-bone interaction tests. Due to a low viscosity, the cement revealed a high integration in the spongiosa and a complete filling up of the bone defect around the placed screws. Moreover, a drillable bone substitute is favourable as the dispersion of the cement paste is not hindered by formerly placed screws. For tibial head fractures, only the combination of bone substitute and screw osteosynthesis provides under lower and maximal loading conditions an adequate stability. KW - Knochenzement KW - Knochenersatzmaterial KW - Bohrbarkeit KW - Tibiakopfbruch KW - Osteosynthese KW - bone substitute KW - drillable KW - struvite KW - tibial fracture KW - calcium phosphate cement KW - Tibiakopfimpressionsfraktur KW - Knochenzement KW - Magnesium Phosphat Zement KW - Kalzium Phosphat Zement KW - bohrbares Knochenersatzmaterial Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-171037 ER - TY - THES A1 - Hinderer, Sandra T1 - Charakterisierung der Freisetzung verschiedener Antibiotika aus resorbierbaren anorganischen Knochenersatzmaterialien sowie die Untersuchung des Einflusses auf materialcharakteristische Eigenschaften T1 - Characterization of the release of various antibiotics from resorbable inorganic bone substitute materials and the study of the influence on material characteristic properties N2 - Synthetische anorganische Knochenersatzmaterialien auf Calcium-Phosphat- und Magnesium-Phosphat-Basis wurden in der hier vorliegenden Dissertation mit verschiedenen handelsüblichen Antibiotika versetzt und deren Freisetzungsverhalten charakterisiert. Zudem wurde der Einfluss des Antibiotikazusatzes auf bestimmte materialcharakteristische Eigenschaften untersucht, hierbei fanden die Quecksilberporosimetrie, die Röntgendiffraktometrie und die Rasterelektronenmikroskopie ihre Anwendung. Insbesondere für die Knochenersatzmaterialien auf Calcium-Phosphat-Basis sollte eine klinisch praktikable und demnach möglichst einfache Methode etabliert werden, um die Kombination mit einem Antibiotikum durchzuführen. Die Detektion der Antibiotika erfolgte mit Hilfe eines UV/VIS-Spektrophotometers. Zudem wurde für einige ausgewählte Kombinationen aus Antibiotikum und Knochenersatzmaterial durch einen Agardiffusionstest die antibakterielle Wirkung nach der Freisetzung aus dem jeweiligen Trägermaterial bestätigt. N2 - Synthetic inorganic bone substitute materials based on calcium phosphate and magnesium phosphate were mixed with various commercially available antibiotics and their release behavior was characterized in the present dissertation. In addition, the influence of the antibiotic addition on certain material characteristic properties was investigated using mercury porosimetry, X-ray diffractometry and scanning electron microscopy. For the calcium-phosphate-based bone substitutes in particular, the aim was to establish a clinically practicable and therefore as simple as possible method for carrying out the combination with an antibiotic. Antibiotics were detected using a UV/VIS spectrophotometer. In addition, for some selected combinations of antibiotic and bone substitute material, an agar diffusion test was used to confirm the antibacterial effect after release from the respective carrier material. KW - Wirkstofffreisetzung KW - Antibiotikum KW - Knochenzement KW - Calciumphosphat KW - UV-VIS-Spektroskopie KW - Antibiotikafreisetzung KW - local drug delivery Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-230836 ER - TY - THES A1 - Blank, Melanie T1 - Entwicklung und materialwissenschaftliche Untersuchungen von Calcium- und Magnesiumphosphat-Biozementen T1 - Development and material-scientific investigations of calcium and magnesium phosphate bio cements N2 - Ziel der Arbeit war die Herstellung und materialwissenschaftliche Untersuchung verschiedener Calciumphosphat-Zemente. Zwei unterschiedliche Zementtypen wurden dargestellt: eine Matrix bestand aus thermomechanisch aktiviertem Hydroxylapatit, die bei basischen pH-Werten zu nanokristallinem HA abbindet; eine zweite Matrix aus magnesiumsubstituierten ß-Tricalciumphosphaten und saurem Calcium-bis-dihydrogenphosphat reagiert zu sekundärem Calcium- bzw. Magnesiumhydrogenphosphat als Endprodukt. Die Werkstoffe wurden hinsichtlich ihrer Druckfestigkeit als abgebundener Zement, der Abbindezeit, des pH-Wert-Verlaufs während des Abbindens, mittels XRD-Analyse auf ihre Zusammensetzung, die durchschnittliche Partikelgröße der jeweiligen Mahlungen und auf ihre Dichte hin untersucht. Die bisher ermittelten Kennwerte der Zementmatrices sind auf jeden Fall ein guter Ausgangspunkt für eine spätere klinische Anwendung; die Zemente könnten bisher gebräuchliche Werkstoffe in ihrer Funktion als Knochenersatzpräparate sinnvoll ergänzen. N2 - The aim oft he study was the production and material-scientific investigation of different calcium phosphate cements. Two different cement types were represented: a matrix consisted of thermalmechanically activated hydroxyl apatite, which ties at basic pH values to nano-crystalline ha; a second matrix from magnesium-substituted ß-Tricalciumphosphaten and sour calcium to dihydrogenphosphat reacted to secondary calcium and/or magnesium hydraulic gene phosphate as final product. The materials became regarding their pressure strength as tied cement, the setting time, the pH value process during tying, by means of XRD analysis on their composition, which examines average particle size of the respective grinding and for its density. The characteristic values of the Zementmatrices determined so far are in any case a good starting point for a later clinical application; the cements could supplement materials used so far in their function as bone spare preparations meaningfully. KW - Knochenzement KW - Calciumphosphat KW - Magnesiumphosphat KW - Knochenersatzmaterial KW - bone cement Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-38934 ER - TY - THES A1 - Helf, Christian T1 - Herstellung von Polymethacrylat/Calciumphosphat-Implantatwerkstoffen durch den 3D-Pulverdruck T1 - Preparation of polymethacrylate/calcium phosphate implant materials via 3D powder printing N2 - Die Erstellung von komplex geformtem Knochenersatz wurde durch den 3D-Pulverdruck unter Verwendung von Calciumphosphatmaterialien beschrieben. Gegenstand der vorliegenden Arbeit war deren Modifikation durch die Verwendung von Methacrylatkunststoffen. Ziel war es, durch die Infiltration von nicht resorbierbaren Kunststoffen, wie sie in kommerziell erhältlichen Knochenzementen verwendet werden, die mechanischen Eigenschaften der nicht gesinterten Keramikstrukturen zu verbessern. Getestet wurden verschiedene Methoden der Infiltration sowie der nachfolgenden Polymerisationsinitiierung durch chemische, thermische oder photochemische Aktivatoren. Daneben erfolgte der Druck von Tricalciumphosphat-Pulvern, die mit Polymethylmethacrylat Partikeln versetzt wurden und durch eine hydraulische Verfestigungsreaktion mit Phosphorsäure aushärten. Die erstellten Materialien wurden auf ihre Porosität, ihre mechanischen Eigenschaften sowie auf die Phasenzusammensetzung ihrer anorganischen Matrix und den Konversionsgrat ihrer organischen Komponente hin untersucht. Es gelang, die freie Porosität der Calciumphosphat-Matrix durch Verwendung von flüssigen, monomeren Kunststoffen zu füllen und diese durch eine thermische Initiierung der radikalischen Polymerisation vollständig zur Aushärtung zu bringen. Bei der Reaktion kommt es neben einer Polymerisationskontraktion im organischen Bestandteil der Kunststoffe zu einer Phasenumwandlung der Bruschitanteile der Calciumphosphat-Matrix. Proben, die mit einem flüssigen Bisphenol-A-Derivat versetzt wurden, zeigten eine Verdreifachung ihrer Festigkeit und erreichten maximale Druckfestigkeiten von 99 MPa, Biegefestigkeiten von 35 MPa und einen E-Modul von 18 GPa. Verglichen mit den biomechanischen Eigenschaften des physiologischen Hartgewebes liegen die Werte damit deutlich über denen von spongiösem und unter denen von kortikalem Knochen. Eine künftige Optimierung erscheint durch die Schaffung einer chemischen Verbundphase zwischen dem anorganischen Calciumphosphat-Gefüge und den Polymerbestandteilen als aussichtsreich. N2 - The production of complex shaped bone graft was described by the 3D powder printing using calcium phosphate materials. The present work dealt with the modification of these materials by adding methylacrylate materials. The objective was to improve the mechanical properties of non-sintered ceramic structures by the infiltration of non-resorbable plastics such as used in commercialized bone cements. Different methods of infiltration as well as chemical, thermal or photochemical polymerization activators have been tested. In addition to that, tricalcium phosphate powders have been enriched by polymethylmethacrylate particles before being printed and cured by an hydraulic hardening reaction with phosphoric acid. The prepared materials have been tested for their porosity, their mechanical properties as well as for the phase composition of their inorganic matrix and the conversion rate of their organic components. It could be achieved to fill the open porosity of printed calcium phosphate matrix by using liquid, monomeric plastics and to cure them completely through a thermal initiation of radical polymerization. Besides the polymerization contraction in the organic component, the thermal treatment led to a phase transformation of the calcium phosphate brushite matrix. Samples, which were infiltrated with a liquid bisphenol-A derivative, showed a threefold increase of their strength and reached a maximum compressive strength of 99 MPa, a flexural strength of 35 MPa and a Young´s modulus of 18 GPa. Compared to biomechanical properties of physiological hard tissues, the levels were significantly higher than those of cancellous and lower than those of cortical bones. To further optimize, it seems promising to create a chemical bond between the inorganic phase of calcium phosphate microstructure and polymer components. KW - Rapid Prototyping KW - Knochenersatz KW - Knochenzement KW - Methacrylsäuremethylester KW - 3D-Pulverdruck KW - Calciumphosphat KW - Rapid Prototyping KW - 3D powder print KW - bone cements KW - methacrylate KW - calcium phosphate Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-39575 ER - TY - THES A1 - Koerdt, Steffen Christian Alexander T1 - Immunhistochemische Untersuchungen zur Expression von Wachstumsfaktoren im Rahmen der Vaskularisation knöcherner Kieferkammaugmentate im Schafmodell T1 - Expression of growth factors of the vascularization in alveolar ridge augmentation procedures using autogenous bone grafts : An immunhistochemical study in the sheep N2 - In der vorliegenden Arbeit wurde die Expression unterschiedlicher Marker für die Vaskularisation in verschiedenen Modifikationen zur Unterkieferaugmentation mit autologem kortikospongiösen Beckenkammtransplantaten in-vivo am Schafmodell untersucht. Wie schon aus Voruntersuchungen bekannt, zeigte vor allem die Modifikation des Transplantatlagers in der Kombination einer resorbierbaren Bio-Gide® Membran mit dem Knochenersatzmaterial (KEM) Bio-Oss® und einem kortikospongiösen Transplantat die geringsten Resorptionsraten. Dieser Konditionierung wurden verschiedene andere Modikifationen des Transplantatlagers gegenübergestellt und jeweils die Expression der Vaskularisationsmarker untersucht und verglichen. Sowohl die Untersuchungen zur Expression von Bone Morphogenetic Protein-2 (BMP-2), Vascular Endothelial Growth Factor (VEGF) und seinen Rezeptor-Isoformen VEGF-Rezeptor 1 und VEGF-Rezeptor 2, sowie den NOS-Isoformen eNOS und iNOS zeigen alle eine signifikant vermehrte Expression in der Konditionierung mit Bio-Oss® als KEM und einer resorbierbaren Bio-Gide® Membran. Lediglich die Expression des von-Willebrand-Faktors (vWF) als Marker des Endothels zeigte keine signifikant vermehrte Expression in der mit Bio-Oss® und Bio-Gide® modifizierten Gruppe. Hier wäre die Tatsache, dass der vWF auch als Marker der endothelialen Dysfunktion beschrieben wird und in den klinisch stärker atrophierten Modifikation vermehrt exprimiert wird, eine Erklärungsmöglichkeit. Die Untersuchungen zur Expression der Vaskularisationsmarker hinsichtlich der Regionen im Augmentat zeigen sowohl bei BMP-2 wie auch bei VEGF und seinen Rezeptorisoformen VEGF-R1 und VEGF-R2 eine signifikant vermehrte Expression im Bereich des Transplantates in der Bio-Oss® Modifikation. Diese Ergebnisse stützen den klinischen Aspekt der guten Vaskularisierung des Transplantates und unterstreichen die Bedeutung der Wachstumsfaktoren für die Vaskularisierung im Transplantat. Bei den Färbungen auf NOS findet sich eine signifikant vermehrte Expression im Transplantatlager. Diese Ergebnisse stellen die Bedeutung von NOS für die Regulation der Osteogenese und die direkten Wirkungen auf Osteoblasten und Osteoklasten. Die Tatsache, dass gerade in der Bio-Oss® Modifikation, in der klinisch die geringste Resorption zu beobachten war, signifikant mehr Vaskularisationsmarker exprimiert wurden, ist Nachweis der besseren Vaskularisation dieser Konditionierung und unterstreicht sowohl den Nutzen von KEM wie Bio-Oss® bei Transplantationen autologen Knochens, wie auch die Möglichkeiten der therapeutischen Verwendung einzelner Wachstumsfaktoren wie z. B. BMP-2. N2 - In this study the expression of various markers for vascularization in different modifications of alveolar ridge augmentation procedures on the mandible with autogenous bone grafts from the iliac crest was analyzed with the help of an in-vivo sheep model. As preliminary investigations suggested, especially the modification of the host side as a combination of a resorbable Bio-Gide® membrane according to the concept of Guided Bone Regeneration (GBR) with Bio-Oss® as a bovine bone substitute, showed the least resorption in clinical findings. This modification of the host side was compared with a control group, in which other modifications of the host side were being used and which showed a way higher rate of resorption during the surveillance period and until the euthanasia of the sheep after 16 weeks. The expression of different vascularization markers was compared between these two groups. The data concerning the expression of Bone Morphogenetic Protein-2 (BMP-2), Vascular Endothelial Growth Factor (VEGF) and its receptor-isoforms VEGF-Receptor 1 and VEGF-Receptor 2, as well as the Nitric Oxide Synthase (NOS) isoforms, the endothelial NOS (eNOS) and the inducible NOS (iNOS) all showed a significantly higher expression within the modification of the host side using GBR and Bio-Oss®. Only the expression of the von-Willebrand-Factor (vWF) as a marker of the endothelium showed no significantly higher expression within this modification but a higher expression within the control group. Hypothetically, the fact that vWF is also a marker of endothelial dysfunction could explain the higher expression within the control group. Taking the different regions of the graft in consideration, BMP-2, VEGF, VEGFR-1 and VEGFR-2 all showed a significantly higher expression within the bone graft of the modification using GBR and Bio-Oss®. These results underline the clinical aspect of the good vascularization of the graft within this modification. NOS showed a significantly higher expression in the region of the host side and could explain the importance of NOS for osteogenesis and its effect on osteoblasts and osteoclasts. In summary, the significantly higher expression of vascularization markers and clincally the lowest rate of atrophy and resorption within the modification of the host side using GBR and Bio-Oss®, underlines the better vascularization of this modification and emphasizes the use of GBR and bone substitues during the transplantation of autogenous bone grafts and suggests the therapeutical use of certain growth factors such as BMP-2 within this modification. KW - Unterkiefer KW - Transplantat KW - Immuncytochemie KW - Knochenzement KW - Knochen-Morphogenese-Proteine KW - Augmentation KW - Vascular endothelial Growth Factor KW - Knochenersatzmaterial KW - VEGF-Rezeptor 1 KW - VEGF-Rezeptor 2 KW - eNOS KW - iNOS KW - alveolar crest augmentation KW - autgenous bone graft KW - immunhistchemistry KW - bovine bone substitute KW - mandible Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69798 ER - TY - THES A1 - Renner, Tobias T1 - In vitro Testverfahren zur Qualifizierung von Knochenklebstoffen T1 - In vitro testing methods for the qualification of bone glues N2 - Knochenklebstoffe, welche eine unkonventionelle Möglichkeit im Bereich der chirurgischen Frakturversorgung darstellen, müssen bereits in vitro eine Reihe an klinischen Anforderungen erfüllen. Hinsichtlich entsprechender Prüfverfahren wurde noch keine Normierungsarbeit geleistet, weswegen Ergebnisse verschiedener Arbeiten schwierig vergleichbar sind. Ziel der Arbeit war es daher Prüfverfahren vorzustellen, welche die Besonderheiten des „Werkstoffes Knochen“ berücksichtigen. In diesem Rahmen werden zwei neuartigen Klebstoffsysteme, ein in situ härtender Knochenzement aus Trimagnesiumphosphat, Magnesiumoxid und organischer Phytinsäure und ein lichthärtender Knochenklebstoff aus Polyethylenglycoldimethacrylat, NCO-sP(EO-stat-PO), Campherchinon und anorganischen Newberyit-Füllern, vorgestellt. Neben diesen sind drei kommerziell erhältliche Klebstoffe Gegenstand der Untersuchung. Dies sind zum einen Histoacryl® und TruGlue® Gewebekleber, zwei Klebstoffe auf Cyanoacrylat-Basis mit unterschiedlich langer Alkyl-Seitenkette, zum anderen Bioglue®, ein Gewebekleber aus Albumin und Glutaraldehyd. Bei den Klebstoffen wurde die Zug- und Scherfestigkeit unter Einfluss der physiologischen Klebstoffalterung, der Variation der Klebefugenbreite, der Variation von komplementären Fügeteilen, sowie Fügeteiloberflächen inspiziert. Makro- und mikroskopische, sowie elektronenmikroskopischen Untersuchung der Bruchflächen auf mikrostrukturelle Besonderheiten und Versagemechanismus wurden angestellt. Die neuartigen Klebstoffsysteme unterliegen zwar den konventionellen Cyanoacrylaten hinsichtlich mechanischer Parameter, weisen aber dennoch adäquate Klebefestigkeiten auf bei zugleich zahlreichen Vorteilen gegenüber konventionellen Systemen im Umgang mit Knochen. Gerade der Magnesiumphosphatzement scheint auf Grund mechanischer Parameter und Vorzügen wie der guten Biokompatibilität und biologischen Abbaubarkeit, Osteoinduktivität, Osteokonduktivität, der einfachen Applizierbarkeit, einem hohen Kosten-Nutzen-Faktor oder dem günstigen Verhalten in wässrigen Milieu vielversprechend. N2 - Bone adhesives are an alternative for surgical fracture treatment, which have to meet clinical requirements already in vitro. Concerning testing methods of bone adhesives, there is no standardization, what leads to the fact, that results of authors, who did research to this topic, are hard to compare. The aim of this research was to present testing methods, which consider the characteristics of the “material bone”. In this connection two novel bone adhesive systems are presented. These are first an in situ hardening bone cement consisting of trimagnesium phosphate, magnesium oxide and organic phytic acid and second a photocurable bone adhesive consisting of polyethylene glycol dimethacrylate, NCO-sP(EO-stat-PO), camphorquinone and a mineral ceramic newberyite-filler. Besides these two novel adhesive systems, three commercialized adhesives are examined. These are on the one hand Histoacryl® and TruGlue® tissue adhesives, two adhesives based on cyanoacrylate with a different size of the alkyl side chain, on the other hand Bioglue®, a tissue adhesive based on albumin and glutaraldehyde. In the case of these adhesives shear strength and tensile bonding strength, as well as the influence of factors like the physiological aging of the adhesive, the variation of the width of the bonded joint, the variation of the complementary adherend or the adherend surface, were investigated. Macro- and microscopic analysis as well as scanning electron microscope analysis of the area of fracture was executed to determine microstructural characteristics and the mechanism of failure. Indeed, the novel bonding systems succumb to the conventional cyanoacrylates concerning mechanical parameters, but nevertheless they exhibit adequate bonding strength for a clinical use. Additionally, they have numerous advantages when it comes to the “material bone” in contrast to conventional adhesives. Especially the magnesium phosphate cement seems to be promising due to its good biocompatibility, biological degradation, osteoinductivity, osteoconductivity, the simple application, an economic cost-benefit-ratio and its favorable performance under wet conditions. KW - bone KW - cement KW - adhesive KW - testing KW - Knochenkleber KW - bone adhesive KW - testing methods KW - bone cement KW - Knochenzement Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161546 ER - TY - THES A1 - Hösl, Daniel T1 - In vitro- Untersuchungen zur Biokompatibilität und antibakteriellen Wirksamkeit von silber-dotierten Tricalciumphosphat-Zementen T1 - In vitro- studies on the biocompatibility and antibacterial activity of silver-doped tricalcium phosphate cements N2 - Gegenstand der vorliegenden Arbeit war die Modifikation von Hydroxylapatit- und Bruschit-Zementen mit 1 % Silber. Ziel war es, den Zementen eine antibakterielle Wirksamkeit bei gleichzeitiger Biokompatibilität ohne Beeinträchtigung ihrer mechanischen Eigenschaften zu verleihen. Durch Mischung von silberdotiertem β-TCP mit Calcium-bis-dihydrogenphosphat Monohydrat (MCPM) bzw. von silberdotiertem α-TCP mit einer 2,5%-Na2HPO4-Lösung entstanden Zementformulierungen, deren Silberfreisetzung, Druckfestigkeit, Abbindezeit sowie Phasenzusammensetzung bestimmt wurde. Desweiteren wurden in vitro-Untersuchungen zur Evaluation der Zytotoxizität mittels Osteoblasten sowie der antibakteriellen Eigenschaften mittels Staph. aureus und Staph. epidermidis durchgeführt. Bei der massenspektrometrischen Analyse der Auslagerungsmedien legte Ag-Bruschit im LB-Medium mit kumulativ 184,5 µg nach 7 Tagen das höchste Freisetzungsverhalten im Vergleich zu Ag-Hydroxylapatit mit 36,8 µg an den Tag; außerdem konnte gezeigt werden, dass sich das molare Verhältnis von Ag+/Ca2+ von theoretisch 1 % bereits bei der Herstellung von Ag+-dotiertem α- bzw. β-TCP auf je 0,78 % reduziert hatte. Die Untersuchung der Phasenzusammensetzung der Zemente wies auf die für die Zemente charakteristischen Beugungsmuster hin. Peaks, die auf Silber hinweisen würden, konnten nicht nachgewiesen werden. Betrachtet man die Druckfestigkeit, konnte der silberdotierte Bruschit-Zement eine leichte Steigerung um 5,1 MPa auf 19,8 MPa erfahren, während der Ag-Hydroxylapatit-Zement nahezu eine Halbierung seiner Festigkeit um 18,5 MPa auf 22,7 MPa erfahren musste. Bei der Auswertung der Versuchsergebnisse wies Ag-Bruschit einen signifikanten bakteriziden Effekt auf, führte aber auch zu einer Reduktion der Osteoblasten auf dieser Oberfläche. Ag-Hydroxylapatit zeigte hingegen nur eine geringe Wirkung gegen die Bakterien, während die Verbindung in dieser in vitro-Studie eher biokompatibel auf die Zellen wirkte. Die in dieser Arbeit modifizierten Zemente sind aufgrund ihrer nicht einheitlichen Ergebnisse hinsichtlich der antibakteriellen Wirksamkeit sowie der wünschenswerten Biokompatibilität für den Einsatz als Knochenersatzmaterial noch nicht geeignet. Die von Ag-Bruschit freigesetzte bakterizide Silbermenge ist für eukaryotische Zellen zu hoch, sodass in weiterführenden Studien diese Freisetzung begrenzt werden müsste. N2 - The present work was the modification of hydroxyapatite and brushite cements with 1% silver. The aim was to give the cement an anti-bacterial activity simultaneously with a biocompatibility without compromising their mechanical properties. Cement formulations, of which the release of silver ions, compressive strength, setting time and phase composition were determined, emerged by mixing silver-doped β-TCP with calcium bis-dihydrogen phosphate monohydrate (MCPM) or by silver-doped α-TCP with a 2.5% Na2HPO4 solution. Furthermore, in vitro- studies were performed to evaluate the cytotoxicity by osteoblasts, and the antibacterial properties using Staph. aureus and Staph. epidermidis. In the mass spectrometric analysis of the outsourcing media, Ag brushite in LB-medium with cumulative 184.5 µg after 7 days, demonstrated the highest release behavior as compared to Ag-hydroxyapatite with 36.8 µg; it also could be shown that the molar ratio of Ag+/ Ca2+ of theoretically 1% had already reduced to 0.78% in the production of Ag+-doped α- and β-TCP. The investigation of the phase composition of the cements showed the characteristic diffraction pattern for these cements. Peaks, which would indicate silver, could not be detected. Considering the compressive strength, the silver-doped brushite cement had shown a slight increase of 5.1 MPa to 19.8 MPa, while the Ag-hydroxyapatite cement had experienced a near halving of its strength of 18.5 MPa to 22.7 MPa. When evaluating the test results, Ag-brushite presented a significant bactericidal effect, but also led to a reduction of osteoblasts on the surface. Ag-hydroxyapatite offered a little effect against the bacteria, while the compound in this in vitro- study had more biocompatible to the cells. The modified cements in this study are, due to their non-uniform results in terms of antibacterial efficacy as well as the desirable biocompatibility, not suitable for the use as a bone substitute material. The release of Ag-brushite bactericidal amount of silver for eukaryotic cells is too high, so this release should be limited in further studies. KW - Bruschit KW - Hydroxylapatit KW - Silber KW - Biokompatibilität KW - antibakteriell KW - Tricalciumphosphat KW - Knochenzement KW - brushite KW - hydroxyapatite KW - silver KW - biocompatibility KW - antibacterial Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52383 ER - TY - THES A1 - Heim, Rebecca Fabiola Natali T1 - Mechanische In-vitro-Materialprüfung von modifizierten, bioaktivierten Knochenzementen auf der Basis von Polymethylmethacrylat T1 - Mechanic in-vitro fatigue-testing of modified bioactivated bone cements based on polymethylmethacrylate N2 - Das Hauptproblem des künstlichen Gelenkersatzes stellt die aseptische Prothesenlockerung dar. Hierbei handelt es sich um ein multifaktoriell bedingtes Geschehen, das auf ein gestörtes Zusammenspiel von biologischen und mechanischen Faktoren zurückzuführen ist. Im Rahmen dieser Arbeit wurden fünf modifizierte, bioaktivierte Knochenzemente bezüglich ihrer Verbundfestigkeit mit Edelstahl und ihrer Hydrolysestabilität untersucht. Ein gemeinsamer Bestandteil aller fünf Modifikationen stellt Hydroxyethylmethacrylat-Phosphat dar. Die Verbundfestigkeit der Zemente wurde anhand unterschiedlicher Anwendungs- bzw Metallvorbehandlungsvoraussetzungen im axialen Zugtest vor und nach künstlicher Alterung ermittelt. Unabhängig von der Vorbehandlung bzw. Anwendungsmodifikation zeigte der ausschließlich mit HEMA-P modifizierte Zement und der Referenzzement annähernd gleiche Zugfestigkeitswerte während die Zementmodifikation mit HEMA-P und zusätzlich Natriumcarbonat und Calciumchlorid deutlich niedrigere Zugfestigkeiten erreichte. Diese Modifikation konnte zudem, bis auf die Testreihe mit erfolgter Silikatisierung und silanisiertem Monomer, dem künstlichen Alterungsprozess nicht standhalten, was die Hydrolysestabilität dieser Modifikation in Frage stellt. Die höchsten Zugfestigkeitswerte nach dem Alterungsprozess konnten, unabhängig von der Zementmodifikation, bei der Testreihe mit erfolgter Silikatisierung und einem mit Silanhaftvermittler angereicherten Monomer festgestellt werden. Die Zemente wurden auf ihre Druckfestigkeit und im vereinfachten dynamischen Hüftprüfstandversuch im flüssigen Milieu getestet. Die Tatsache, dass sich bei allen Zementmodifikationen relativ wenig Spalten am Zement-Metall-Interface nachweisen ließen, spricht für eine gesteigerte Hydrolysebeständigkeit unter dynamischer Belastung. Die ermittelten Druckfestigkeiten liegen im Bereich von 83,85 MPa für PM 10, 89,66 MPa für PM 11 und 82 MPa für SPM 10 was den Anforderungen an Knochenzemente gerecht wird. Diese sollten gemäß ISO 5833 eine Druckfestigkeit von über 70 MPa aufweisen. Um eine detaillierte Aussage über die mechanischen Eigenschaften dieser Zementmodifikationen treffen zu können bedarf es weiterer Materialprüfungen N2 - The main problem in artificial joint replacement is the aseptic prosthesis loosening. The causes are multifactorially conditioned since both biological and mechanical factors are playing a major role. To generate bioactive PMMA surfaces directly at the site of implantation an amphiphilic molecule phosphorylated 2‐hydroxyethylmethacrylate (HEMA‐P) had already been added to commercial bone cements.One bone cement modification had also been enriched with calcium and carbonate salts. The first part of this study was to compare two modified bio‐activated bone cements concerning their tensile strength and their hydrolytic stability to standard commercial bone cement. The Bone Cements were tested regarding different usage and pre‐treatment of the metal used before and after 15 days of storage at 70 degrees Celsius in PBS. Only the bone cement modified with HEMA‐P reached about the same results as the common bone cement. Whereas the modification with additional calcium and carbonate salts showed not only a significantly lower tensile strength but also hydrolytic instability compared to the common bone cement. The best results after the artificial aging process could be proven after silicate coating of the metal and the enrichment of the monomer with a silane coupling agent. The second part of the study was designed to proof that modified bone cements meet the common ISO standards regarding their compressive and fatigue strengths and their hydrolytic stability. All the modified samples met the common ISO standard figures for compressive strength of more than 70 MPa. Furthermore the fact that all modifications have shown little signs of fatigue and minor cracks at the cement‐metal interface in testing indicates the conclusion that the hydrolytic stability is given. However, to describe the entire range of mechanical characteristics, more experiments would have to be carried out. KW - Aseptische Lockerung KW - Druckfestigkeit KW - Zugfestigkeit KW - Knochenzement KW - Hüftgelenkprothese KW - Dauerschwingfestigkeit KW - aseptic prosthesis loosening KW - tensile strength KW - bone cement KW - total hip arthroplasty Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-81170 ER - TY - THES A1 - Spatz, Kerstin T1 - Mechanische und rheologische Eigenschaften von Calciumphosphat-Zementen T1 - Mechanical and rheological properties of calcium phosphate cements N2 - Zur Erhöhung der mechanischen Stabilität mineralischer Knochenzemente aus Calciumorthophosphaten (CPC) wurde in einem TTCP/DCPA-System das Zementedukt TTCP mit verschiedenen biokompatiblen Oxiden (SiO2, TiO2, ZrO2) während des Herstellungsprozesses dotiert. Dies führte zur Bildung von Calciummetallaten und einer Herabsetzung der Löslichkeit der TTCP-Komponente des Zements. Gegenüber einem oxidfreien Zement konnte die Druckfestigkeit von 65 MPa auf 80 MPa (SiO2) bzw. 100 MPa (TiO2) gesteigert werden. In einem zweiten Ansatz zur Verbesserung der Injizierbarkeit wurden die Wechselwirkungen der Partikeloberflächen mit der flüssigen Zementphase betrachtet. Durch biokompatible Additive sollte eine repulsive elektrostatische Wechselwirkung eingestellt werden, um Partikelagglomerate effektiv zu dispergieren und eine verflüssigende Wirkung zu erreichen. Die Injizierbarkeit eines TTCP/DCPA-Zements durch eine Kanüle mit 800 µm Durchmesser konnte durch die Verwendung von 500 mM tri-Natriumzitrat-Lösung aufgrund einer deutlichen Herabsetzung der Viskosität der Zementpaste signifikant gesteigert werden (>95%, P/L 3,3/1, Kraftaufwand 20 N). Abschließend wurde der Einfluss der Partikelgrößenverteilung auf die Festigkeit und Injizierbarkeit einer auf monomodaler Partikelgrößenverteilung basierten Zementmatrix untersucht. Hierzu wurden einem mechanisch aktivierten a-TCP-System unreaktive, feinkörnige Füllstoffpopulationen (TiO2, CaHPO4, CaCO3) zugesetzt und systematisch deren Effekt in Verbindung mit einer Partikelaufladung durch tri-Natriumzitrat auf die rheologischen und mechanischen Eigenschaften untersucht. Erst die Kombination einer bimodalen Partikelgrößenverteilung mit tri-Natriumzitrat-Lösung führte zu einer starken Erniedrigung der Viskosität, damit zur nahezu vollständigen Injizierbarkeit der Zemente und einer teilweise signifikanten Steigerung der mechanischen Festigkeiten (z.B. 72 MPa reiner a-TCP-Zement auf 142 MPa mit Zusatz von CaHPO4). N2 - An improvement of the mechanical strength of calcium phosphate bone cements in combination with a lower cement paste viscosity for better injectability was investigated. A first approach to improve the mechanical stability consisted in adding several biocompatible oxides (SiO2, TiO2, ZrO2) during the fabrication process of tetracalcium phosphate (TTCP). The formation of calcium metallates led to a decrease of the solubility of the oxide doped tetracalcium phosphates. The cements based on tetracalcium phosphates mixed with SiO2 and TiO2 exhibit a significant increase of the compressive strengths (65 MPa of pure cement up to 80 MPa (SiO2) and 100 MPa (TiO2)). A second approach to decrease the viscosity of CPC pastes considered the interactions between the particle surfaces and the liquid cement phase. To disperse agglomerates and improve the injection properties of CPC, biocompatible components were added to the liquid phase. As a result the injection properties of the TTCP/DCPA cement improved significantly. The use of 500 mM trisodium citrate solution as liquid phase changed the viscosity of the cement paste to a point, where complete injectability (> 95%) through an 800 mm diameter hypodermic needle could be achieved at low loads (20 N). In order to transfer the results of a multi-constituent cement to a single reactive component cement, different fine-particle-sized fillers were added to mechanically activated, monomodal α-tricalcium phosphate (α-TCP) cement. The inert fillers dicalcium phosphate anhydrous (DCPA), titanium dioxide (TiO2) and calcium carbonate (CC) were added to the α-TCP-matrix in different concentrations. For an effective ionic modification a 500 mM trisodium citrate solution was used as liquid phase as in the aforementioned TTCP/DCPA cement system. Only the combination of a bimodal particle size distribution and trisodium citrate solution led to a nearly complete injectability and a significantly increase of the mechanical stability of CPC. KW - Biomaterial KW - Knochenzement KW - Calciumphosphate KW - Implantatwerkstoff KW - Rheologie KW - Calciumphosphat KW - calcium phosphate KW - injectability KW - zetapotential KW - mechanical properties KW - tricalcium phosphate KW - Rheologie KW - Zetapotential KW - mechanische Eigenschaften Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-124860 ER - TY - THES A1 - Carrera, Eva-Maria T1 - Modifikation von Calciumphosphat-Biokeramiken mit biologisch aktiven Metallionen T1 - Modification of calcium phosphate bioceramics with biologically active metal ions N2 - Das Ziel dieser Arbeit war es, die Modifizierung von porösem, calciumdefizitärem, nanokristallinem Hydroxylapatit mit verschiedenen Metallionen zu testen. Es wurden α‑TCP‑basierende Zementproben hergestellt, die durch zwei verschiedene Dotierungsmethoden mit bestimmten Metallionen (Cu2+, Co2+, Mn2+, Ni2+, V3+, Zn2+) modifiziert wurden. Die eine Methode bestand in der Zusinterung der entsprechenden Metallionen zum α‑TCP‑Pulver. Bei der anderen Methode waren die Ionen in unterschiedlicher Konzentration (1 mmolar, 100 μmolar, 10 μmolar) in der Binderlösung enthalten. Die hergestellten Zementproben wurden hinsichtlich bestimmter Eigenschaften wie der initialen Abbindezeit und Druckfestigkeit untersucht und zusätzlich rasterelektronenmikroskopischen, röntgen-diffraktometrischen und massenspektrometrischen Analysen unterzogen. Als Referenz diente ein bereits am Menschen erfolgreich als Knochenersatzmaterial eingesetzter nanokristalliner, calciumarmer Hydroxylapatit-Zement. Da Hydroxylapatit nahezu nur durch Osteoklasten mittels einer lokalen pH‑Wert-Absenkung resorbiert werden kann, wurden in‑vitro‑Versuche mit einer immortalisierten Makrophagen-Zelllinie durchgeführt. Über einen 15‑tägigen Versuchszeitraum wurde die Zytokompatibilität mittels bestimmter Zellproliferations- und Zellaktivitätsmessungen überprüft. Zusätzlich wurden die mit Zellen besiedelten Proben unter dem Rasterelektronenmikroskop betrachtet und eine TRAP‑Färbung durchgeführt, um die Differenzierung zu osteoklastenähnlichen Zellen beurteilen zu können. Bei der Auswertung der Versuche wurde deutlich, dass nicht das Metall alleine maßgeblich für Veränderungen der physikalischen Eigenschaften im Vergleich zum metallfreien Referenzzement war. Auch die Art der Metallionendotierung, ob durch Zugabe mit der Binderlösung oder durch Zusinterung, hatte bei den Metallen unterschiedliche Auswirkungen auf die Zementeigenschaften. Während der Versuche wurden Abbindezeiten von 18 Minuten bis über 60 Minuten gemessen und Druckfestigkeiten zwischen 9,3 MPa und 30,5 MPa festgestellt. Bei der Auswertung der Zellversuchsreihe wurde festgestellt, dass die Zellen auf den mit Metallionen modifizierten Zementplättchen tendenziell eine niedrigere Aktivität bei gleich bleibender Proliferation aufwiesen als auf den metallfreien Referenzproben. Dieses Ergebnis konnte mikroskopisch bestätigt werden. N2 - The aim of this work was to test the modification of porous, calcium deficient, nanocrystalline hydroxyapatite with various metal ions. α‑TCP‑based cement samples were prepared which were modified by two different doping methods with specific metal ions (Cu2+, Co2+, Mn2+, Ni2+, V3+, Zn2+). One method consisted in the sintering of the corresponding metal ions to the α‑TCP powder. In the other method the ions were contained in the binder solution in varying concentrations (1 mmolar, 100 μmolar, 10 μmolar). The cement samples produced were examined with regard to certain properties such as the initial setting time and compressive strength, and were additionally subjected to scanning electron microscopy, X-ray diffractometry and mass spectrometry analyzes. A nanocrystalline, calcium-poor hydroxylapatite cement, which has already been successfully used as a bone replacement material in humans, served as a reference. Since hydroxylapatite can be resorbed almost exclusively by osteoclasts by means of a local pH reduction, in vitro experiments with an immortalized macrophage cell line were performed. Cytocompatibility was tested by means of certain cell proliferation and cell activity measurements over a 15-day experimental period. In addition, the cells populated with cells were observed under the scanning electron microscope and a TRAP staining was performed to evaluate the differentiation to osteoclast-like cells. In the evaluation of the experiments, it became clear that the metal alone was not decisive for changes in the physical properties compared to the metal-free reference cement. The nature of the metal ion doping, whether by addition with the binder solution or by sintering, had different effects on the cements properties of the metals. During the tests, setting times of 18 minutes to over 60 minutes were measured and compressive strengths between 9,3 MPa and 30,5 MPa were determined. In the evaluation of the cell test series, it was found that the cells on the metal ions modified cement platelets tended to have a lower activity with a constant proliferation than on the metal-free reference samples. This result could be confirmed microscopically. KW - Knochenzement KW - Calciumphosphat KW - Hydroxylapatit KW - α‑Tricalciumphosphat Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-141338 ER - TY - THES A1 - Renner, Tobias T1 - Neue adhäsive mineral-organische Knochenzemente auf Basis von Phosphoserin und Magnesiumphosphaten bzw. -oxiden T1 - Novel adhesive mineral-organic bone cements based on phosphoserine and magnesium phosphates or oxides N2 - Heutige chirurgische Situationen können zeitweise den Einsatz eines Knochenkleber erfordern, welcher sich jedoch noch nicht in der klinischen Praxis etablieren konnte. In jüngster Vergangenheit haben mit Phosphoserin modifizierte Zemente (PMC) auf der Grundlage von Verbindungen zwischen o-Phosphoserin (OPLS) und Calciumphosphaten wie Tetracalciumphosphat (TTCP) oder α-Tricalciumphosphat (α-TCP) an Popularität gewonnen. Ebenso bekommen chelatbildende Magnesiumphosphatzemente als mineralische Knochenadhäsive mehr Zuspruch. In dieser Arbeit wurden neue mineralorganische Knochenzemente auf der Basis von Phosphoserin und Magnesiumphosphaten oder -oxiden untersucht, die hervorragende Hafteigenschaften besitzen. Diese wurden mittels Röntgenbeugung, Fourier-Infrarot-Spektroskopie und Elektronenmikroskopie analysiert und mechanischen Tests unterzogen, um die Haftfestigkeit am Knochen nach Alterung unter physiologischen Bedingungen zu bestimmen. Die neuartigen biomineralischen Klebstoffe zeigen eine ausgezeichnete Haftfestigkeit an Knochen mit etwa 6,6-7,3 MPa unter Scherbelastung. Die Adhäsive sind auch aufgrund ihres kohäsiven Versagensmusters und ihres duktilen Charakters vielversprechend. In diesem Zusammenhang sind die neuen adhäsiven Zemente den derzeit vorherrschenden Knochenadhäsiven überlegen. Ergänzend wurde versucht, dieses neue System mit unterschiedlichen Additiven zu modifizieren. Dabei wurde Mannit erfolgreich als Porogen verwendet. Dreiarmiges sternförmiges NCO-sP(EO-stat-PO) sollte die adhäsiven Eigenschaften und das Leistungspotenzial unter Wasser verbessern. Zuletzt wurden mit Glycerol präfabrizierte Pasten hergestellt, welche gelagert werden können und bei Kontakt mit Wasser aushärten. Generell ist zu betonen, dass künftige Bemühungen um Knochenklebstoffe aus Phosphoserin und Mg2+ sehr lohnenswert erscheinen. N2 - Present surgical situations require a bone adhesive which has not yet been developed for use in clinical applications. Recently, phosphoserine modified cements (PMC) based on mixtures of o-phosphoserine (OPLS) and calcium phosphates, such as tetracalcium phosphate (TTCP) or α-tricalcium phosphate (α-TCP) as well as chelate setting magnesium phosphate cements have gained increasing popularity for their use as mineral bone adhesives. Here, we investigated new mineral-organic bone cements based on phosphoserine and magnesium phosphates or oxides, which possess excellent adhesive properties. These were analyzed by X-ray diffraction, Fourier infrared spectroscopy and electron microscopy and subjected to mechanical tests to determine the bond strength to bone after ageing at physiological conditions. The novel biomineral adhesives demonstrate excellent bond strength to bone with approximately 6.6–7.3 MPa under shear load. The adhesives are also promising due to their cohesive failure pattern and ductile character. In this context, the new adhesive cements are superior to currently prevailing bone adhesives. In addition, an attempt was made to modify this new system with different additives. Mannite was successfully used as a porogen. Three-armed star-shaped NCO-sP(EO-stat-PO) should improve the adhesive properties and performance potential under water. Last glycerol-prefabricated pastes were prepared, which could be stored and cure upon contact with water. In general, it should be emphasized that future efforts on bone adhesives from phosphoserine and Mg2+ seem very worthwhile. KW - Phosphoserin KW - Klebstoff KW - Magnesiumphosphate KW - Knochenzement KW - Magnesiumoxid KW - bone adhesive KW - bone glue KW - magnesium phosphate cement KW - organophosphates KW - bone cement Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-323210 ER - TY - THES A1 - Schaufler, Christian Thomas Siegfried T1 - Osteogenes Potential additiv gefertigter Calciummagnesiumphosphat-Keramiken T1 - Osteogenic potential of calciummagnesiumphosphate ceramics processed by additive manufacturing N2 - Der steigende Bedarf an Knochenersatzmaterialien (KEM) in Medizin und Zahnmedizin verdeutlicht die Notwendigkeit der Etablierung weiterer alloplastischer, also synthetisch hergestellter, KEMs. Additive Fertigung ermöglicht die Herstellung patientenspezifischer Implantate. Hierfür wird auf Basis von 3D Bildgebung eines Knochendefekts, ein Implantat mittels CAD geplant und anschließend mittels additiver Fertigung, zum Beispiel durch 3D Pulverdruck hergestellt. Ziel dieser Arbeit war die Untersuchung des osteogenen Potentials in vitro von Calciummagnesiumphosphatkeramiken mit der allgemeinen Strukturformel CaxMg(3-x)(PO4)2 mit x = 0; 0,25; 0,75; 1,5; 3 aus additiver Fertigung. Hierfür wurden Prüfkörper mittels 3D Pulverdruck gedruckt, anschließend durch Hochtemperatursinterung verfestigt und durch Behandlung mit reaktiven Lösungen nachgehärtet. Abhängig von der reaktiven Lösung wandelte sich die Keramik teilweise in Struvit, Bruschit und Newberyit um. Die biologische Testung in vitro erfolgte mit hFOB 1.19 Zellen und ergab eine gute Biokompatibilität sowie die Ausdifferenzierung osteogener Progenitorzellen für fast alle Keramikphasen, wobei die newberyithaltigen Keramiken tendenziell bessere Ergebnisse erzielten. N2 - The increasing demand of materials for bone grafting in medicine and dentistry highlights the need of synthetically made, alloplastic, materials for bone grafting. Additive manufacturing enables the production of patient-fitted implants. For this purpose, the implant is virtually planed based on a 3D image dataset, using the CAD technique and produced by additive manufacturing like 3D powder printing. The aim of this study was to investigate the osteogenic potential of calcium magnesium phosphate ceramics (CaxMg(3-x)(PO4)2 with x = 0; 0,25; 0,75; 1,5; 3) in vitro processed by 3D powder printing. Scaffolds were made by 3D powder printing, solidified by high temperature sintering and afterwards post treated with reactive solutions. The reactive solution caused the precipitation of either brushite, newberyite or struvite. The biological testing in vitro, using hFOB 1.19 cells, showed good cytocompatibility and differentiation of osteogenic cells for nearly all ceramics mentioned above. The ceramics containing newberyite achieved slightly better results at all. KW - Knochenzement KW - 3D-Druck KW - Tricalciumphosphatkeramik KW - Magnesiumphosphate KW - Struvit KW - Calciummagnesiumphosphat-Keramik KW - 3D Pulverdruck KW - Newberyit KW - Stanfieldit KW - Knochenersatzmaterial Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-311798 ER - TY - THES A1 - Hofmann, Michael Peter T1 - Physikalische Charakterisierung von Calciumphosphat-Pulvern zur Einstellung von Prozessparametern für die Herstellung von Knochenzement T1 - Physical characterisation of calcium phosphate powders for the adjustment of processing parameters for the fabrication of bone cement N2 - Die Arbeit behandelt die physikalische Charakterisierung der Herstellung einer Tetracalciumphosphat (TTCP) / Calciumhydrogenphosphat (DCPA) Pulvermischung zur Anwendung als Knochenzement. Ziel war die Gewinnung einer Korrelation von Prozessparametern mit anwendungsrelevanten Zementeigenschaften, also hohe mechanische Festigkeit, definierte Abbindezeit, physiologischer pH-Wert-Verlauf und Reproduzierbarkeit. Die Einstellung eines physiologischen pH-Werts im Bereich 7-8 der Zementpaste erfordert eine geeignete Lösungsrate beider Pulverkomponenten. Dies gelingt durch Mahlung mit einer Einstellung der mittleren Partikelgröße von 10-20 µm (TTCP) und 0,5-2 µm (DCPA). DCPA wird nass gemahlen; das Suspensionsmedium dient der Agglomerationsverminderung, da bei Partikelgrößen von 0,5-2 µm interpartikuläre Kräfte gegenüber der Gewichtskraft dominieren. TTCP wurde durch Sinterung von DCPA und Calciumcarbonat bei 1500°C hergestellt und trocken vermahlen. Die Ermittlung der mittleren Partikelgrößen und relativen Breite der Partikelgrößenverteilungen, der sogenannten Spanne, nach Mahlung erfolgte durch Laserstreuung und Auswertung der Streumuster nach der Mie-Theorie. Mahlungen von TTCP führen zu Feinkornanteilen mit Partikelgrößen < 1 µm, die eine gleichmäßige Lösungsrate zu Beginn der Abbindereaktion verhindern. Durch Variation der Mahlparameter kann dieser Feinkornanteil minimiert werden. Dennoch besteht die Notwendigkeit, Abbinde-Beschleuniger auf Natriumphosphat (NaP)-Basis zu verwenden, um die erhöhte Lösungsrate der TTCP-Komponente zu kompensieren. Kriterium für die Auswahl des geeigneten Suspensionsmediums für die Nassmahlung von DCPA ist das Zetapotential von DCPA-Partikeln in flüssiger Phase, welches durch Laser-Doppler-Elektrophorese gemessen wird. Die Messungen zeigen, dass sich das Zetapotential mit Partikelgröße und Spanne korrelieren lässt. Hohe Zetapotential-Werte zu Beginn der Mahlung führen zu kleiner Endpartikelgröße. Das Zetapotential von gemahlenen DCPA-Pulvern steigt bei der Mahlung an und bestimmt die minimale Spanne. Partikelgröße und Spanne bestimmen über die effektive Viskosität außerdem das Ende des Mahlvorgangs. Als Suspensionsmedium zur Einstellung kleiner Partikelgröße bei gleichzeitig geringer Spanne eignet sich Reinstwasser, gefolgt von Ethylenglykol und Ethanol. Es lassen sich mittlere Partikelgrößen von 0,6 µm bei einer Spanne von 1,0 realisieren. Die Mahlung setzt neben der Partikelgröße die Kristallinität von DCPA und TTCP herab, durch eine mechanisch induzierte Phasenumwandlung in den amorphen Zustand. Röntgendiffraktometrische Untersuchungen, XRD, der Pulver zeigen eine Abnahme der Intensität der Beugungsreflexe um ca. 50% für TTCP und ca. 30% für DCPA nach 24h. Die Auswertung der Beugungsspektren durch Rietveld-Analyse ergibt gleichzeitig eine kontinuierliche Abnahme der mittleren Kristallitgröße. Die Bildung amorpher Anteile resultiert für TTCP in abbindefähigen, einkomponentigen Zementen, die im stark basischen Bereich mit 2.5%iger Na2HPO4-Lösung Hydroxylapatit und Calciumhydroxid bilden. Hochkristallines TTCP ist dagegen nicht reaktiv, bedingt durch die Ausbildung einer Hydroxylapatitschicht um die Partikel. Suspensionsmedium und Luftfeuchtigkeit bewirken eine Kontamination der feinkörnigen Pulver. Stickstoffadsorptions-Messungen, BET, zeigen die Lokalisation des Kontaminats auf der kompakten, nicht porösen Partikeloberfläche. Der Anteil an nicht entfernbarem Suspensionsmedium, bestimmt durch Thermogravimetrie, liegt bei 3-5% nach Trocknung an Luft und lässt sich auf < 1% bei Vakuumtrocknung reduzieren. Während organische wasserlösliche Kontaminationen keinen Einfluss auf die Lösungsrate und Reaktivität von DCPA ergeben, führt Wasser als Suspensionsmedium bzw. das Einwirken von Luftfeuchtigkeit auf die getrockneten Pulver zu einer starken Herabsetzung der Reaktivität. Ursache ist die Ausbildung einer diffusionshemmenden Hydroxylapatit-Schicht um die Partikel durch Hydrolyse der Calciumphosphate. DCPA, durch Mahlung in Wasser inaktivierend kontaminiert, zeigt die niedrigste Lösungsrate, trotz großer spezifischer Oberfläche. Die Mischung der Pulver erfolgt durch Selbstmischung bei geringer mechanischer Krafteinleitung; die hochdispersen DCPA-Partikel agglomerieren aufgrund interpartikulärer van-der-Waals-Kräfte an den großen TTCP-Partikeln. Ausgehärtete Zemente zeigen eine Korrelation zwischen der Druckfestigkeit und der Partikelgröße, sowie eine Korrelation von Zugfestigkeit und Spanne der Partikelgrößenverteilung von DCPA. Ein erhöhter Feinkornanteil des TTCP-Pulvers führt zur Reduktion der mechanischen Festigkeit. Die vorgestellte physikalische Charakterisierung der TTCP/DCPA- Pulverherstellung führt zu einem Medizinprodukt mit Druckfestigkeiten von 75 MPa und Zugfestigkeiten von 12 MPa. Abbindezeit und pH-Wert-Verlauf bei der Aushärtung lassen sich durch die Konzentration von NaP-Abbindebeschleunigern einstellen. N2 - This thesis is about the physical characterisation of the fabrication process of a Tetracalciumphophate (TTCP) / Calciumhydrogenphosphate (DCPA) bone cement powder mixture. The goal was to achieve a correlation between processing parameters and application relevant properties of the cement matrix, i.e. high mechanical strength, defined setting time, physiological pH-value and reproducibility. For the adjustment of a physiological pH-value between 7 and 8 of the cement paste it is necessary to adjust the solubility rate of both powder components. This is done by adjusting the medium particle size of TTCP and DCPA to 10-20 µm respectively 0,5-2 µm. DCPA is wet milled; the suspension medium has to prevent agglomeration, because at particle sizes between 0,5-2 µm attractive interparticular forces dominate over the deagglomerating weight of the powder particles. TTCP is fabricated by sintering a DCPA / Calciumcarbonate mixture at 1500°C and dry milling it. The measurement of medium particle size and the relative width of the particle size distribution, the so called span, after milling were done by laser diffraction and calculation following Mie-theory. The milling of TTCP leads to a fine powder fraction with particle sizes below 1 µm, which prevents a uniform solubility rate at the beginning of the setting reaction. This fine powder fraction can be minimized by variation of the milling parameters. Nonetheless it is necessary to use sodium phosphate setting-accelerators to equalise the higher solubility rate of the TTCP-cements component. Criteria for choosing the suspension medium for the wet milling of DCPA is the zeta potential of DCPA particles in liquid phase, measured by Laser Doppler Electrophoresis (LDE). The measurements indicate that the zeta potential is correlated with particle size and span. A high zeta potential value at the start of the milling process leads to a small final particle size. The zeta potential of milled DCPA rises with the milling process and defines the minimum span. Particle size and span determine the effective viscosity and therefore the end of the milling process. For achieving a small particle size together with a small span distilled water is most suitable, followed by ethylene glycol and ethyl alcohol. A medium particle size of 0,6 µm together with a span of 1,0 can be realised. The milling process is also reducing the cristallinity of DCPA and TTCP by a mechanically induced phase change to the amorphous state. X-Ray diffraction measurements of the powders after 24h of milling show an intensity decrease of the diffraction patterns by almost 50% for TTCP and almost 30% for DCPA. The analyses of the diffraction patterns by Rietveld-analysis show a continuous decrease of the medium crystallite size at the same time. The formation of amorphous TTCP fractions results in a one component cement able to set in a high pH-regime. High cristallinity TTCP is not reactive due to the hydroxyapatite layer on the particle surface. The suspension medium and humidity are causing a contamination of the powder particles. Nitrogenadsorption measurements, BET, are showing that the contaminant is located on the compact non-porous particle surface. The fraction of not extractable suspension medium, determined by thermogravimetry, is in the region of 3-5% after drying in air and can be reduced to less than 1% by drying in vacuum. Organic watersoluble contamination does not lead to changes in solubility rate or reactivity of DCPA particles. Water as suspension medium or humidity reduces the reactivity significantly. The reason is a hydroxyapatite layer on the DCPA particles caused by hydrolysis of the calciumphosphate leading to decreased diffusion. Water milled DCPA is showing the lowest solubility rate despite having the highest specific surface area. The two powder components are literally self mixing. The disperse DCPA particles are agglomerating on the surface of the larger TTCP particles due to attractive van-der-Waals-forces. The hardened cement matrix is showing a correlation between compressive strength and particle size and between diametral tensile strength and the span of the particle size distribution. An increase of the fine powder fraction of TTCP leads to a decrease in mechanical strength. The physical characterisation of the fabrication process of a TTCP/DCPA-cement powder mixture leads to a medical device with a compressive strength of 75 MPa and a diametral tensile strength of 12 MPa. Setting time and pH-value can be adjusted by the amount of sodium phosphate setting-accelerator. KW - Knochenzement KW - Herstellung KW - Calciumphosphate KW - Pulver KW - Knochenzement KW - Calciumphosphat KW - Kontamination KW - Mahlprozess KW - Physikalische Charakterisierung KW - bone cement KW - calcium phosphate KW - contamination KW - milling process KW - physical characterisation Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-7315 ER - TY - THES A1 - Kreczy, Dorothea T1 - Untersuchung des in vivo Einwachsverhaltens von Zementgranulaten und -pasten aus resorbierbaren Calcium-dotierten Magnesiumphosphat-Phasen T1 - Investigating the in vivo ingrowth behavior of cement granules and pastes from resorbable calcium-doped magnesium phosphate phases N2 - In der vorliegenden Arbeit wurden unterschiedliche zementbasierte Knochenersatzmaterialien hinsichtlich ihres Potentials zur Behandlung knöcherner Defekte in vivo untersucht. Zwei verschiedene Calcium-dotierten Magnesiumphosphat Zementformulierungen (CMPC) wurden mit einem Referenzmaterial aus Calciumphosphat Zement (CPC) verglichen. Dazu wurden auf Basis von CMPC präfabrizierte, injizierbare Pasten bzw. sphärische Granulate hergestellt und anhand von orthotopen, potenziell kraftbelasteten Defekten in Kaninchenfemora getestet. Zentrales Ziel hierbei war es, herauszufinden, wie sich die Materialien in Defektsituationen mit Hartgewebekontakt biologisch verhalten und degradieren bzw. in Knochen umbauen. Nach einer Liegedauer von 6 bzw. 12 Wochen wurden die Knochenneubildung und die Degradation der Materialien mittels Histomorphometrie analysiert. Alle Materialien waren biokompatibel und führten zur Bildung von neuem Knochen. Der CMPC-Zement zeigte im Vergleich zu CPC einen beschleunigten Abbau, während sich am Referenzmaterial mehr mineralisierter Knochen bildete. Die untersuchten Calcium-dotierten Struvit-bildenden Magnesiumphosphatzemente erwiesen sich als biokompatibel, gut resorbierbar und stellen mit ihrer Fähigkeit zur Knochenbildung ein vielversprechendes Knochenersatzmaterial dar. N2 - Two different bone replacement materials where tested for their in vivo bone regeneration capacity. Two different calcium-magnesia-phosphate cement (CMPC) formulations in form of premixed, injectable oil-based cement paste and granulates and a reference calcium-phosphate cement (CPC) cement were implanted into semi-load bearing femoral drill hole in rabbits. After 6 or 12 weeks the implants were retrieved, and cement degradation and new bone formation was analyzed by histomorphometry. The result showed that all cements where biocompatible, triggered the formation of and were surrounded by new bone. The CMPC cement showed an accelerated degradation compared to CPC, while more new bone was built on the CPC materials. The calcium-doped magnesium phosphate cement materials exhibited regeneration of the host bone and demonstrated enhanced degradability in vivo, which makes them a promising bone replacement material. KW - Knochenzement KW - Knochenersatzmaterial KW - Magnesiumphosphate KW - Granulat KW - Paste KW - injizierbare Paste KW - präfabrizierte Paste KW - injectable paste KW - premixed paste KW - spherical granules KW - sphärische Granulate Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-205510 ER - TY - THES A1 - Krönung, Mariusz T1 - Untersuchungen zum Abbindeverhalten und den mechanischen Eigenschaften von Bruschit-bildenden mineralischen Knochenzementen T1 - Inquiries to the setting reaction and mechanical properties of a brushite forming mineral bone cement N2 - Ziel der vorliegenden Arbeit war die Untersuchung des Abbindeverhaltens, der Verarbeitungsqualität und der mechanischen Eigenschaften von Bruschit- bildenden, mineralischen Knochenzementen auf der Basis von ß- Tricalciumphosphat. Die Zemente stellen eine interessante Materialklasse für den Knochenersatz dar, da sie im Gegensatz zu marktgängigen Hydroxylapatit- Zementen durch ihre höhere chemische Löslichkeit im Zeitraum von 6- 12 Monaten resorbierbar sind. Zur Herstellung von ß- TCP wurden verschiedene Parameter variiert, etwa die Sinterdauer, Temperatur sowie Mahlparameter. Durch Mischung von ß-TCP mit primärem Calcium-bis-dihydrogenphosphat Hydrat (MCPM) entstanden abbindefähige Zementformulierungen, deren Druckfestigkeit, Abbindezeit und Phasenzusammensetzung bestimmt wurde. Die mechanische Testung erfolgte hierbei ohne Vorkompression der Zementpaste, so dass die Ergebnisse auch vom klinischen Anwender nachvollziehbar wären. N2 - The aim of this study was to investigate the setting reaction, the manufacturing quality and the mechanical properties of Brushite forming, mineral bone cement based on beta- tricalcium phosphate. These cements belong to a special class of bone substitute material, which provide a better chemical solvation and quicker resorption than conventional hydroxyapatite cement. Beta- TCP was produced with a variation of several parameters, such as the duration of sintering, the sintering temperature and grinding parameters. Beta- TCP / monocalcium phosphate monohydrate (MCPM) mixtures were found to set and harden like conventional hydraulic cements and were tested by their compressive strength, setting time and the phase composition. The mechanical strength was tested without pre- compression of the cement paste in order to achieve reproducible results by a clinical operator. KW - Knochenzement KW - Bruschit KW - Calziumphosphatzemente KW - Tricalciumphosphat KW - Brushite KW - Calciumphosphate cement KW - Tri- calciumphosphate Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-29284 ER - TY - THES A1 - Saratsis, Vasileios T1 - Untersuchungen zum Abbindeverhalten und der Injizierbarkeit von Magnesiumphosphat-Knochenzementen T1 - Research of setting properties and the injectability of magnesium phosphate bone cements N2 - Ziel dieser Arbeit war die experimentelle Untersuchung von selbsthärtenden Magnesiumphosphat Zementen als Knochenersatzmaterial bezüglich der Verarbeitungsqualität, der Temperaturentwicklung beim Abbinden, der Injizierbarkeit und der mechanischen Eigenschaften. Der Schwerpunkt wurde dabei auf die Anpassung der rheologischen Eigenschaften der Zementpaste für eine minimal–invasive Applikation gelegt. Durch eine elektrische Aufladung der Partikeloberfläche von Farringtonit nach Adsorption von Citrat–Ionen und Zusatz der biokompatiblen Füllstoffe Struvit oder TiO2 für die Einstellung einer bimodalen Partikelgrößenverteilung, war es möglich, die Viskosität der Pasten zu erniedrigen und den filter–pressing−Effekt während der Injektion zu unterdrücken. Die Modifikation des Mg3(PO4)2 Pulvers und der flüssigen Phase erlaubte bei einer Verarbeitungszeit von ca. 10 min die nahezu quantitative Injektion des Zements durch eine 40 mm lange Kanüle mit einem inneren Durchmesser von ca. 800 μm. Zemente mit dem P/L–Verhältnis von 2,0 g/ml erreichten so eine Festigkeit von über 50 MPa nach 24 h Aushärtung. Obwohl die exotherme Abbindereaktion der Zemente teilweise zu einer Erwärmung auf bis zu 67 °C führte, geben literaturbekannte in vivo Studien keinen Hinweis auf Nebenwirkungen innerhalb des umliegenden Hart- bzw. Weichgewebes, was den Verdacht einer möglichen thermischen Nekrose aufgrund der exothermen Abbindereaktion ausschließt. Dies liegt eventuell auch darin begründet, dass die Temperaturmessungen in dieser Arbeit mit einer verhältnismäßig großen Menge an Zementpaste (∼15 g) durchgeführt wurden, während in vivo doch eher geringere Mengen (< 5 g) appliziert werden. N2 - Aim of the present thesis was to investigate self-setting magnesium phosphate cements as bone substitute material with regard to their setting quality, the temperature development during the setting, the injectability and the mechanical properties. Emphasis was placed on the optimization of the rheological properties of the cement paste for a minimally invasive application. Due to electrostatic repulsion of farringtonite particles after adsorption of citrate ions and addition of struvite or TiO2 for setting a bimodal particle size distribution the injectability was vastly improved. The modification of the Mg3(PO4)2 powder and the liquid phase allowed the quantitative injection of the cement through a 40 mm long cannula with an inner diameter of 800 μm with a setting time of approximately 10 minutes. Cements set at P/L ratio 2.0 demonstrated a compressive strength of more than 50 MPa after curing for 24 hours. Although the cement setting reaction resulted in temperatures of up to 67 °C, in vivo studies indicate no side effects within the surrounding hard or soft tissue, which excludes the suspicion of a possible thermal necrosis due to the exothermic setting reaction. This may also be related to the fact that temperature measurements in this work were carried out with a relatively large amount of cement paste (~15 g), whereas in vivo rather smaller amounts (<5 g) are applied. KW - Knochenzement KW - Injizierbarkeit KW - Injectability KW - Abbindeverhalten KW - Magnesiumphosphat KW - Knochenzemente KW - properties KW - magnesium phosphate KW - cements Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-158902 ER - TY - THES A1 - Gefel, Eugen T1 - Zelluläre Resorption 3D-gedruckter Knochenimplantate auf Basis von Calciummagnesiumphosphaten T1 - Cellular resorption of 3D-printed bone implants based on calcium magnesium phosphates N2 - Für die Behandlung von Knochendefekten kritischer Größe gibt es heute eine Reihe von Therapiemöglichkeiten. Neuartige Ansätze mit Magnesiumphosphat- (MPC) und Calciummagnesiumphosphatzementen (CMPC) haben sich als echte Alternativen zu den etablierten Calciumphosphaten erwiesen. Ziel war es, die Osteoklastogenese in vitro auf 3D-pulvergedrucktem CMPC und MPC zu induzieren und die zelluläre Resorption (zR) zu analysieren. Polystyrol (PS), Glas, β-TCP und Brushit-bildender Zement dienten als Referenzen. Als Proben wurden Zemente der allgemeinen stöchiometrischen Summenformel CaxMg(3–x)(PO4)2 (x = 0; 0,25; 0,75; 3) verwendet, die Struvit oder Newberyit enthielten. Für die Osteoklastogenese wurden monozytenangereicherte PBMCs aus Buffy-Coat mittels dreifacher Dichtegradientenzentrifugation isoliert, auf die Prüfoberflächen ausgesät und über einen Zeitraum von 22 Tagen mit Zytokinen (M-CSF und RANKL) stimuliert. Die Interaktion der Zellen mit den Zementen bzw. PS/Glas wurde mittels TRAP-Färbung und -Aktivität, DNA- und Ionenkonzentrationen (Ca2+, Mg2+, PO43–, pH-Wert), Rasterelektronen-, Durchlicht-, Auflicht- und Fluoreszenzmikroskopie analysiert. Auf den Struvit- und Newberyit-bildenden Zementen konnten keine für Osteoklasten typischen Riesenzellen nachgewiesen werden. Auf den Struvit-bildenden Zementen wurde deutlich mehr mononukleäre Zellen nachgewiesen wurden als auf den Newberyit-bildenden Zementen. Während die Freisetzung von Mg2+ und PO43– ausschließlich durch die chemische Degradation erfolgte, wurde Ca2+ zunächst adsorbiert und anschließend durch zR freigesetzt. Die erhöhte Ca2+-Adsorption im Vergleich zur Ca2+-Resorption führte insgesamt zu einer Calcium-Präzipitation. Da lediglich auf β-TCP Resorptionslakunen beobachtet wurden, wird angenommen, dass auf den CMPC, MPC und Brushite-bildenden Zementen die zellvermittelte Ca2+-Freisetzung von den Präzipitaten ausging, die von Makrophagen auf den Zementen und/oder Riesenzellen auf den Wellplatten resorbiert wurden. N2 - There are a number of therapeutic options available today for the treatment of critical size bone defects. Novel approaches using magnesium phosphate (MPC) and calcium magnesium phosphate cements (CMPC) have proven to be real alternatives to the established calcium phosphates. The aim was to induce osteoclastogenesis in vitro on 3D powder-printed CMPC and MPC and to analyse cellular resorption (zR). Polystyrene (PS), glass, β-TCP and brushite-forming cement served as references. Cements of the general stoichiometric molecular formula CaxMg(3-x)(PO4)2 (x = 0; 0.25; 0.75; 3) containing struvite or newberyite were used as samples. For osteoclastogenesis, monocyte-enriched PBMCs were isolated from buffy coat by triple density gradient centrifugation, seeded onto the test surfaces and stimulated with cytokines (M-CSF and RANKL) over a period of 22 days. The interaction of the cells with the cements or PS/glass was analysed by TRAP staining and activity, DNA and ion concentrations (Ca2+, Mg2+, PO43-, pH), SEM, transmitted light, reflected light and fluorescence microscopy. No giant cells typical of osteoclasts could be detected on the struvite- and newberyite-forming cements. On the struvite-forming cements, significantly more mononuclear cells were detected than on the newberyite-forming cements. While the release of Mg2+ and PO43- was exclusively by chemical degradation, Ca2+ was first adsorbed and then released by zR. The increased Ca2+ adsorption compared to Ca2+ resorption led to calcium precipitation overall. Since resorption lacunae were only observed on β-TCP, it is assumed that on the CMPC, MPC and Brushite-forming cements, the cell-mediated Ca2+ release originated from the precipitates resorbed by macrophages on the cements and/or giant cells on the well plates. KW - Knochenzement KW - Osteoklast KW - Struvit KW - Calciumphosphat KW - Magnesiumphosphate KW - Newberyit KW - Calciummagnesiumphosphat KW - Bioresorption KW - 3D Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322248 ER -