TY - THES A1 - Sauer, Alexander T1 - Vergleichende biomechanische Untersuchung einer winkelstabilen Konturenplatte zur Stabilisierung von Frakturen der distalen Fibula in einem Osteoporose simulierenden Knochenmodell T1 - Biomechanical evaluation of a contoured locking plate for distal fibular fractures in an artifical osteoporotic bone model N2 - Nach operativer Stabilisierung distaler Fibulafrakturen mit einem Standardimplantat wird bislang eine Teilbelastung der betroffenen Extremität empfohlen. Diese ist in der Nachbehandlung bei älteren Patienten mit eingeschränkten koordinativen Fähigkeiten und Begleiterkrankungen stark eingeschränkt. Gegenstand dieser Arbeit sind vergleichende biomechanische Untersuchungen einer winkelstabilen Konturenplatte, einer konventionellen Konturenplatte sowie der AO-Drittelrohrplatte. Entsprechende Experimente wurden in einem Osteoporose simulierenden Knochenmodell (Synbone, Generic bone, osteoporotic, 0080) durchgeführt. Hierbei wurde zum einen eine Torsionsgrenzkraftmessung und zum anderen eine zyklische Torsionstestung (4000 Zyklen mit 20% des maximalen Drehmomentes) durchgeführt. Es konnte gezeigt werden, dass das Drehmoment bei Versagen ab einer Schraubenlänge von 16 mm sowie das maximale Drehmoment, welches zum Implantatversagen der winkelstabilen Konturenplatte führte ab einer Schraubenlängen von 14 mm stets größer war als dasjenige der konventionellen Konturenplatte. Ebenso zeigte sich eine Überlegenheit gegenüber der Drittelrohrplatte. Diese überlegenenen biomechanischen Eigenschaften, welche zusätzlich in einer weiterführenden experimentelle Arbeit mit humanen osteoporotischen Unterschenkelpräparaten bestätigt werden konnten, schaffen bessere Vorrausetzungen für eine funktionelle Nachbehandlung des älteren Patienten mit einer postoperativen Vollbelastung. Eine klinische Studie muss nun bestätigen, ob die verbesserten mechanischen Eigenschaften tatsächlich eine veränderte Nachbehandlung ermöglichen. N2 - Fixation of ankle fractures in elderly patients is associated with reduced stability conditioned by osteoporotic bone. Therefore, fixation with implants providing improved biomechanical features could allow a more functional treatment, diminish implant failure and avoid consequences of immobilization. In this study we evaluated a lateral conventional contoured plate with a locking contoured plate and a standard one-third tubular plate stabilising a distal fibular fracture in an artificial osteoporotic bone model (Synbone, Generic bone, osteoporotic, 0080). We performed a torque-to-failure and a cyclic testing (4000 cycles, 20% of maximal torque-to-failure). The locking plate showed a higher torque-to-failure and maximal torque compared to the conventional contoured plate and the standard one-third tubular plate. The fixation of distal fibular fractures in osteoporotic bone with the contoured locking plate may be advantageous as compared to the conventional plates. The locking plate with improved biomechanical attributes may allow a more functional treatment, reduce complications and consequences of immobilisation. A cadaver study confirmed our biomechanical results and further clinical studies will follow to evaluate the clinical benefits of the locking contoured plate. KW - Oberes Sprunggelenk KW - Sprunggelenksfrakturen KW - osteoporotischer Knochen KW - Lauge-Hansen KW - winkelstabile Konturenplatte KW - Biomechanik KW - ankle fractures KW - Lauge-Hansen KW - osteoporotic bone KW - contoured locking plate KW - biomechanics Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66755 ER - TY - JOUR A1 - Ochman, S. A1 - Vordemvenne, T. A1 - Paletta, J. A1 - Raschke, M. J. A1 - Meffert, R. H. A1 - Doht, S. T1 - Experimental Fracture Model versus Osteotomy Model in Metacarpal Bone Plate Fixation JF - The Scientific World Journal N2 - Introduction Osteotomy or fracture models can be used to evaluate mechanical properties of fixation techniques of the hand skeleton in vitro. Although many studies make use of osteotomy models, fracture models simulate the clinical situation more realistically. This study investigates monocortical and bicortical plate fixation on metacarpal bones considering both aforementioned models to decide which method is best suited to test fixation techniques. Methods Porcine metacarpal bones (n =40) were randomized into 4 groups. In groups I and II bones were fractured with a modified 3-point bending test. The intact bones represented a further control group to which the other groups after fixation were compared. In groups III and IV a standard osteotomy was carried out. Bones were fixated with plates monocortically (group I, III) and bicortically (group II, IV) and tested for failure. Results Bones fractured at a mean maximum load of 482.8N±104.8N with a relative standard deviation (RSD) of 21.7%, mean stiffness was 122.3±35 N/mm. In the fracture model, there was a significant difference (P = 0.01) for maximum load of monocortically and bicortically fixed bones in contrast to the osteotomy model (P = 0.9). Discussion. In the fracture model, because one can use the same bone for both measurements in the intact state and the bone-plate construct states, the impact of inter-individual differences is reduced. In contrast to the osteotomy model there are differences between monocortical and bicortical fixations in the fracture model. Thus simulation of the in vivo situation is better and seems to be suitable for the evaluation of mechanical properties of fixation techniques on metacarpals KW - biomechanics KW - fracture model KW - metacarpal KW - osteotomy KW - plate fixation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178840 N1 - http://dx.doi.org/10.1100/2011/465371 VL - 11 ER -