TY - JOUR A1 - Schulz, Alexander A1 - Würthner, Frank T1 - Folding-induced fluorescence enhancement in a series of merocyanine hetero-folda-trimers JF - Angewandte Chemie International Edition N2 - Many dyes suffer from fast non-radiative decay pathways, thereby showing only short-lived excited states and weak photoluminescence. Here we show a pronounced fluorescence enhancement for a weakly fluorescent merocyanine (MC) dye by being co-facially stacked to other dyes in hetero-folda-trimer architectures. By means of fluorescence spectroscopy (lifetime, quantum yield) the fluorescence enhancement was explained by the rigidification of the emitting chromophore in the defined foldamer architecture and the presence of a non-forbidden lowest exciton state in H-coupled hetero-aggregates. This folding-induced fluorescence enhancement (FIFE) for specific sequences of π-stacked dyes points at a viable strategy toward improved fluorophores that relates to the approach used by nature in the green fluorescent protein (GFP). KW - organic chemistry KW - merocyanines KW - aggregation KW - dyes/pigments KW - fluorescence KW - folding Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256582 VL - 61 IS - 2 ER - TY - JOUR A1 - Menekse, Kaan A1 - Renner, Rebecca A1 - Mahlmeister, Bernhard A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Bowl-shaped naphthalimide-annulated corannulene as nonfullerene acceptor in organic solar cells JF - Organic Materials N2 - An electron-poor bowl-shaped naphthalimide-annulated corannulene with branched alkyl residues in the imide position was synthesized by a palladium-catalyzed cross-coupling annulation sequence. This dipolar compound exhibits strong absorption in the visible range along with a low-lying LUMO level at –3.85 eV, enabling n-type charge transport in organic thin-film transistors. Furthermore, we processed inverted bulk-heterojunction solar cells in combination with the two donor polymers PCE–10 and PM6 to achieve open-circuit voltages up to 1.04 V. By using a blend of the self-assembled naphthalimide-annulated corannulene and PCE–10, we were able to obtain a power conversion efficiency of up to 2.1%, which is to the best of our knowledge the highest reported value for a corannulene-based organic solar cell to date. KW - Chemie KW - corannulene KW - nonfullerene acceptors KW - curved π-systems KW - bulk-heterojunction solar cells KW - aggregation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-299095 UR - https://www.thieme-connect.com/products/ejournals/html/10.1055/s-0040-1714283 SN - 2625-1825 VL - 2 IS - 3 ER - TY - JOUR A1 - Kümmel, Reiner A1 - Lindenberger, Dietmar T1 - Energy in Growth Accounting and the Aggregation of Capital and Output JF - Biophysical Economics and Sustainability N2 - We review the physical aggregation of value added and capital in terms of work performance and information processing and its relation to the deflated monetary time series of output and capital. In growth accounting it complements the time series of labor and energy, measured in hours worked per year and kilowatt-hours consumed per year, respectively. This aggregation is the conceptual basis on which those energy-dependent production functions have been constructed that reproduce economic growth of major industrial countries in the 20th century with small residuals and output elasticities that are for energy much larger and for labor much smaller than the cost shares of these factors. Accounting for growth in such a way, which deviates from that of mainstream economics, may serve as a first step towards integrating the First and the Second Law of Thermodynamics into economics. KW - aggregation KW - cost-share theorem KW - economic growth KW - energy KW - entropy KW - output elasicities Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-241135 VL - 5 ER - TY - JOUR A1 - Renner, Rebecca A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Self-Assembly of bowl-shaped naphthalimide-annulated corannulene JF - ChemistryOpen N2 - The self-assembly of a bowl-shaped naphthalimide-annulated corannulene of high solubility has been studied in a variety of solvents by NMR and UV/Vis spectroscopy. Evaluation by the anti-cooperative K\(_2\)-K model revealed the formation of supramolecular dimers of outstanding thermodynamic stability. Further structural proof for the almost exclusive formation of dimers over extended aggregates is demonstrated by atomic force microscopy (AFM) and diffusion ordered spectroscopy (DOSY) measurements as well as by theoretical calculations. Thus, herein we present the first report of a supramolecular dimer of an annulated corannulene derivative in solution and discuss its extraordinarily high thermodynamic stability with association constants up to > 10\(^6\)M\(^-\) \(^1\) in methylcyclohexane, which is comparable to the association constants given for planar phthalocyanine and perylene bisimide dyes. KW - corannulene KW - π-π-interactions KW - aelf-assembly KW - aggregation KW - supramolecular chemistry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204396 VL - 9 IS - 1 ER - TY - THES A1 - Hermann, Stephanie T1 - Adenosindiphosphat-vermittelte Funktion und Expression von purinergen Rezeptoren in gewaschenen humanen Thrombozyten T1 - Adenosindiphosphate-mediated function and expression of purinergic receptors in washed platelets N2 - Nach der Präparation von gewaschenen Thrombozyten, einem wichtigen Ausgangsmaterial für die experimentelle Forschung oder für die Transfusionsmedizin, tritt bekannterweise ein zunehmender Verlust der ADP-vermittelten Aggregationsfähigkeit ein. Die verminderte Funktionsfähigkeit von Thromboyzten nach dem Waschvorgang kann somit auch experimentelle Ergebnisse beeinflussten. Allerdings sind die dafür verantwortlichen molekularen Mechanismen bisher nicht aufgeklärt, sodass in dieser Dissertationsarbeit molekulare sowie auch funktionelle Vorgänge untersucht wurden, die zum bekannten Phänomen des raschen Verlustes der ADP-vermittelten Aggregationsfähigkeit gewaschener Thrombozyten führen. Die Wirkung von ADP wird über die drei purinergen Rezeptoren P2Y1, P2X1 und P2Y12 vermittelt wird. Daher wurde zunächst die ADP-induzierte Aggregationsfähigkeit alleine bzw. unter Kostimulation mit Epinephrin oder Serotonin - zwei Induktoren, deren Rezeptoren mit analogen Signalwegen wie die ADP-Rezeptoren P2Y1 bzw. P2Y12 gekoppelt sind - bestimmt. Um Hinweise zu erhalten, wie die Abnahme der ADP-vermittelten Reaktivität von gewaschenen Thrombozyten mit der purinergen Rezeptorexpression und -distribution sowie mit der nachgeschalteten Signalweiterleitung im Zusammenhang steht, wurde zudem die Expression purinerger Rezeptoren auf der Thrombozytenoberfläche bzw. die Konzentration von purinergen Rezeptoren im Zytosol gewaschener Thrombozyten mittels Durchflusszytometrie bzw. ELISA gemessen. Es zeigte sich, dass die Funktion der den purinergen Rezeptoren nachgeschalteten Signalwege während der Lagerungszeit zunehmend beeinträchtigt wird, aber zumindest teilweise erhalten bleibt, wie anhand von Effekten durch Kostimulation mit den Induktoren Epinephrin und Serotonin gezeigt werden konnte. Die Distribution der Rezeptoren zwischen der Thrombozytenoberfläche und den intrazellulären Kompartimenten unterliegt komplexen Prozessen, die induktorabhängig reguliert sind. Eine initiale Zunahme der Expression von ADP-Rezeptoren während der Lagerung von gewaschenen Thrombozyten geht dabei nicht einher mit der Aufrechterhaltung der ADP-induzierten Aggregation. In der Schlussfolgerung ist die fortschreitende Degeneration der ADP-vermittelten Aggregation - neben einem Rückgang der Rezeptorexpression nach mehr als einer Stunde Lagerungszeit - vor allem auf einen funktionellen Verlust der purinergen Rezeptoren zurückzuführen. N2 - Washing of platelets is an important procedure commonly used for experimental studies, e.g. in cardiovascular research, or transfusion medicine. As a well-known phenomenon, responsiveness to adenosine diphosphate (ADP) is reduced in washed platelets. Therefore, washing of platelets may affect experimental results. The underlying molecular mechanisms of the rapid loss of ADP-mediated aggregation of washed platelets have not been thoroughly studied. Aim of this dissertation was to elucidate the molecular and functional processes of this phenomenon. ADP mediates its action via three purinergic receptors P2Y1, P2X1 and P2Y12. At first the ADP-induced aggregation of washed platelets was determined by using ADP alone or ADP combined with the stimulators epinephrine or serotonin. Both mediate their effects via the same signaling pathways as ADP but use different receptors. To get information if the reduced responsiveness to ADP in washed platelets is linked with the receptor expression and distribution, the expression and concentration of purinergic receptors on the platelet surface and in the cytosol of washed platelets was measured by using flow cytometry and ELISA. It was shown that the function of the signaling pathways downstream of the purinergic receptors was increasingly impaired during storage of washed platelets. However, it could be at least partially retained by co-stimulation with epinephrine or serotonin. The distribution of receptors between the platelet surface and the intracellular compartments is based on complex processes which are regulated depending on the different stimulators. An initial increase in the expression of ADP receptors during storage of washed platelets was not associated with the maintenance of ADP-induced aggregation. In conclusion, the progressive decrease of ADP-mediated aggregation is - next to a decrease of expression - mainly caused by functional loss of the purinergic receptors. KW - ADP KW - Aggregation KW - G-Protein gekoppelte Rezeptor KW - Purinozeptor KW - Thrombozyt KW - adenosine diphosphate KW - aggregation KW - purinergic receptors KW - g-protein-coupled receptor KW - washed platelets KW - P2Y1 KW - P2Y12 KW - P2X1 KW - ELISA KW - flow cytometry Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-185201 ER - TY - THES A1 - Gershberg, Jana T1 - Self-assembled Perylene Bisimide Dimers and their Interaction with Double-stranded DNA T1 - Selbst-assemblierte Perylenbisimid-Dimere und ihre Wechselwirkung mit DNA N2 - The self-assembly of molecules based on π-π-interactions and hydrogen bonding is of significant importance in nature. These processes enable the formation of complex supramolecular structures with diverse functions. For the transfer of the concepts from nature to artificial supramolecular structures, a basic understanding of those processes is needed. For this purpose, π-conjugated aromatic molecules with an easy synthetic access are suitable as their functionalities can be changed effortless. Perylene bisimide (PBIs) dyes are attractive candidates since they fulfill these requirements owing to their tendency to self-assemble in solution due to their large aromatic π-surfaces. Furthermore, the changes of the optical properties (for instance absorption, emission or circular dichroism) of PBI dyes, caused by their self-assembly, are easy to study experimentally. Structural variations of PBI dyes including additional non-covalent interactions, such as hydro-gen bonding, enable to direct their self-assembly process. Thus, the formation of interesting su-pramolecular structures of PBI dyes could be realized, although, often of undefined size. The aim of this thesis was to develop strategies to restrict the aggregate size of PBI dyes. Therefore, de-fined structural features of PBI molecules were combined and a variation of external influences such as solvent and concentration included. Furthermore, DNA was utilized as a template for the limitation of the aggregate size of PBI dyes. Chapters 1 and 2 provide general information and describe examples from literature which are necessary to understand the following experimental work. The first chapter is based on the inter-actions of various molecules with DNA. Therefore, DNA is considered as a supramolecular biom-acromolecule containing specific structural and functional features to interact with small mole-cules. Afterwards, the main interaction modes of small molecules with DNA such as electrostatic interaction, intercalation and groove binding with corresponding examples are discussed. Among all techniques applied to study the interaction of ligands with DNA, UV/Vis absorption, fluores-cence and circular dichroism spectroscopy were described in detail. At the end of this chapter, examples of already pre-associated systems showing interactions with DNA are presented. The second chapter is focused on the determination and mathematic evaluation of the self-assembly processes. The simplest models such as monomer-dimer and isodesmic model are de-scribed and supplemented by examples. Furthermore, the simplest modification of the isodesmic model, the K2-K model, is presented. Additionally, experimental problems, which may arise dur-ing the investigations of the self-assembly processes, are addressed. For the description of the entire self-assembly process, a sufficiently large concentration range and an appropriate measure-ment method that is sensitive in this concentration range is necessary. Furthermore, the full transi-tion from the monomeric to the aggregated species has to be spectroscopically ascertainable. This enables an accurate mathematic evaluation of the self-assembly process and provides meaningful binding constants. The self-assembly pathway can be controlled by the variation of solvent, con-centration or temperature. However, this pathway can also be directed by a rational design of the molecular structure of the considered system. For example, a specific interplay of π-π-interactions and hydrogen bonding may promote isodesmic as well as cooperative growth into large struc-tures. The main focus of this thesis is to develop strategies to control the aggregate size of PBI dyes (Chapter 3). For this purpose, a PBI scaffold was designed which contains hydrogen bonding amide functions at the imide positions derived from the amino acid L-alanine and solubilizing side groups in the periphery (Figure 81). The variations of the residues R/R’ range from didodecylox-yphenyl, didodecylphenyl, dioligo(ethylene glycol)phenyl to branched and linear alkyl chains. The most extensive study of the aggregation behavior was performed for the PBI dye 5. Concen-tration-dependent 1H NMR and UV/Vis absorption measurements clearly revealed the formation of dimers in chloroform. Further investigations by means of 2D NMR, VPO and ITC confirmed the exclusive presence of dimer aggregates of PBI 5 in the investigated concentration range. Mo-lecular modelling studies, supported by NMR and FT-IR experiments, provided structural reasons for the absence of further growth into larger aggregates. The specific combination of π-π interac-tions and hydrogen bonds between the NH groups of the amide groups and the carbonyl oxygen atoms of the PBI core are decisive for the formation of the discrete dimer stack (see Figure 82). The investigations of the aggregation behavior of PBIs 6-9 were less extensive but consistent with the results obtained for PBI 5. However, the determined binding constants vary over a considera-ble range of 1.1 x 102 M-1 (PBI 8) to 1.4 x 104 M-1 (PBI 5). These differences could be attributed to structural variations of the dyes. The electron-rich phenyl substituent promoted the aggregation tendency of PBIs 5-7 compared with 8 and 9 that carry only alkyl side chains. Thus, the π-π in-teractions of bay-unsubstituted PBI cores in combination with hydrogen bonding of the amide functions control the formation of discrete dimers of these PBI dyes. The variation of conditions, such as solvent, change the aggregation behavior of PBI dyes. In the solvents toluene and/or methylcyclohexane, anti-cooperative growth into larger aggregates of PBI 5 was observed (Chapter 4). The important feature of this self-assembly process is the absence of isosbestic points over the whole concentration range in the UV/Vis absorption measurements. The preference for the dimeric species of PBI 5 remained in both solvents as well as in mixtures of them, but upon increasing the concentration these dimers self-assemble into larger aggregates. An important feature of the self-assembly process is the preferred formation of even-numbered aggregates compared to the odd-numbered ones (see Figure 83). Although, the conventional K2-K model provides plausible binding constants, it is not capable to describe the aggregation behavior adequately, since it considers a continuous size distribution. The gradual aggregation process over dimers, tetramers, hexamers, etc. was therefore analyzed with a newly developed K2-K model for anti-cooperative supramolecular polymerization. By the global analysis of the UV/Vis absorption spectra a very good agreement between the experimental and simulated spectra, which were based on the new K2-K model, was obtained. Furthermore, the calculated UV/Vis absorption spectra of a dimer and an aggregate highlighted the most important structural differences. The absorption spectrum of the dimer still has a pronounced vibronic structure which gets lost in the spectrum of the aggregate. In another part of this work, a series of water soluble PBI dyes were described which contain similar PBI scaffolds as PBIs 5-8 (Chapter 5). These PBI dyes self-assemble into similar dimer aggregates in water due to their positively charged side chains causing electrostatic repulsion be-tween the molecules (see Figure 84). Here, however, the self-assembly behavior has not been studied thoroughly in water due to the similarities of already reported PBI dyes. Instead, the focus here is on the characterization of the interactions of these dyes with DNA/RNA. The comprehensive studies using thermal denaturation experiments showed the high stability of these PBI/polynucleotide complexes. The spermine-functionalized PBI dyes having six positive charges showed strong interactions with DNA/RNA which was expressed in a signif-icant increase of the melting temperatures of DNA/RNA (ΔTm values between 7 and > 35 ° C). The dioxa analogues containing only two positive charges had lower enhancement of the melting temperature of DNA/RNA (ΔTm values between 3 and 30 ° C). A similar trend has been observed in the fluorimetric titrations. The spermine-functionalized PBI dyes showed high binding con-stants (log Ks = 9.2 - 9.8), independently of the used polynucleotides. In contrast, the dioxa ana-logues displayed smaller binding constants (log Ks = 6.5 - 7.9) without any correlation between binding affinity and binding strength of the PBI dyes and the applied polynucleotides. The CD-spectroscopic measurements revealed significant differences in the binding properties of the dyes with DNA/RNA. They were dependent on the steric hindrance of the amino acid residues at the imide position and their configuration on one side and the grooves properties of ds-DNA/RNA on the other side. The spectroscopic results confirmed the formation of excitonically coupled PBI dimers in the minor groove of ds-DNA and the major groove of ds-RNA. Depending on the se-quence, the grooves of the polynucleotides provide different amount of space for embedding molecules. The guanine amino groups protrude into the minor groove of the polynucleotide poly(dG-dC)2 increasing the steric hindrance, which is not the case for poly(dA-dT)2. Molecular modeling studies showed that the PBI dimers penetrate deeper into the groove of poly(dA-dT)2 due to the absence of the steric hindrance, in comparison to the groove of poly(dG-dC)2 (see Figure 85). N2 - Die Selbstassemblierung von Molekülen, die auf π-π-Wechselwirkungen und Wasenstoffbrücken-bindungen basiert, ist von entscheidender Bedeutung in der Natur. Selbstassemblierungsprozesse ermöglichen den Aufbau von komplexen supramolekularen Strukturen mit vielfältigen Funktio-nen. Um Konzepte aus der Natur für künstliche supramolekulare Systeme nutzen zu können, müs-sen die wesentlichen Abläufe der Selbstassemblierungsprozesse verstanden werden. Dazu eignen sich π-konjugierte aromatische Moleküle, die einen relativ einfachen synthetischen Zugang bieten und vielfältig funktionalisiert werden können. Perylenbisimid-Farbstoffe (PBI) stellen für diesen Zweck eine attraktive Substanzklasse dar, da sie aufgrund von großen aromatischen π-Flächen zur Selbstassemblierung tendieren. Zusätzlich können durch die Selbstassemblierung einhergehenden Änderungen der optischen Eigenschaften (beispielsweise Absorption, Emission oder Circulardich-roismus) von PBI-Farbstoffen einfach experimentell studiert werden. Die vielen strukturellen Va-riationsmöglichkeiten von PBI-Farbstoffen erlauben das Einbeziehen von weiteren nichtkovalen-ten Wechselwirkungen zwischen den Molekülen, beispielsweise Wasserstoffbrückenbindungen, sodass der Selbstassemblierungsprozess dirigiert werden kann. Mit diesem Ansatz gelang es bis-her interessante supramolekulare Strukturen von PBI-Farbstoffen aufzubauen, allerdings waren diese oft von undefinierter Größe. Daher war das Ziel dieser Arbeit die Entwicklung von Kon-zepten um die Aggregatgröße von PBI-Farbstoffen zu begrenzen. Hierzu wurden definierte Strukturmerkmale von PBI Molekülen kombiniert, der äußere Einfluss wie Lösungsmittel und Konzentration variiert und DNA als Templat für die größenlimitierte Aggregatstruktur der PBI-Farbstoffe eingesetzt. Die Kapitel 1 und 2 geben allgemeine Informationen und diskutieren Beispiele aus der Literatur, die nötig sind, um die nachfolgend diskutierten experimentellen Arbeiten zu verstehen. Das erste Kapitel diskutiert die Wechselwirkungen verschiedener Molekülen mit DNA. Hierbei wird DNA als ein supramolekulares Biomakromolekül betrachtet und seine spezifischen strukturellen und funktionalen Eigenschaften beschrieben, die für die Interaktionen mit kleinen Molekülen aus-schlaggebend sind. Die wichtigsten Interaktionsformen wie elektrostatische Wechselwirkungen mit dem Phosphatrückgrat, Interkalation durch π-π-Wechselwirkungen mit den Basenpaaren und Furchenbindung durch Wasserstoffbrückenbindungen und van der Waals-Wechselwirkungen werden anhand ausgewählter Beispiele diskutiert. Von der Vielzahl möglicher Techniken, die angewendet werden, um Wechselwirkungen zwischen Liganden und DNA zu untersuchen, wer-den UV/Vis-, Fluoreszenz- und Circulardichroismus-Spektroskopie in Detail erläutert. Am Ende des Kapitels werden Beispiele von Wechselwirkungen von bereits prä-assoziierten supramolekula-ren Systemen mit DNA vorgestellt. Das zweite Kapitel beschäftigt sich mit der Bestimmung und mathematischen Beschreibung von Selbstassemblierungsprozessen. Die einfachsten Modelle, wie das Monomer-Dimer und das iso-desmische Modell, werden beschrieben und mit Beispielen ergänzt. Des Weiteren wird die ein-fachste Modifikation des isodesmischen Modells, das K2-K Modell vorgestellt. Anschließend wird auf experimentelle Probleme eingegangen, die bei der Untersuchung von Selbstassemblie-rungsprozessen auftreten können. Um den Assemblierungsprozess vollständig beschreiben zu können, wird ein ausreichend großer Konzentrationsbereich und eine entsprechende Messtechnik, die für diesen Konzentrationsbereich empfindlich genug ist, benötigt. Des Weiteren sollte der vollständige Übergang vom Monomer zum assemblierten System spektroskopisch erfassbar sein. Dies ermöglicht eine akkurate mathematische Auswertung des Selbstassemblierungsprozesses und liefert sinnvolle Bindungskonstanten. Der Selbstassemblierungspfad kann oft durch Variation des Lösungsmittels, Konzentration und Temperatur kontrolliert werden. Darüber hinaus besteht die Möglichkeit, den Selbstassemblierungspfad mit Hilfe eines spezifischen Designs der molekularen Struktur von dem untersuchten System zu dirigieren. Es konnte gezeigt werden, dass ein beson-deres Zusammenspiel von π-π-Wechselwirkungen und Wasserstoffbrückenbindungen sowohl zum isodesmischen als auch kooperativen Wachstum von großen Strukturen führen kann. Der Hauptfokus dieser Arbeit liegt in der Entwicklung von Strategien für die Kontrolle der Aggregatgröße von PBI Farbstoffen. (Kapitel 3). Um dieses Ziel zu erreichen, wurde ein PBI Gerüst entworfen, das Amidfunktionen in den Imidpositionen für die Ausbildung von Wasser-stoffbrückenbindungen enthält, die von der Aminosäure L-Alanin abgeleitet wurden. Zusätzlich wurden in der Peripherie des Farbstoffgerüsts jeweils löslichkeitsfördernde Seitengruppen R/R‘ wie Didodecyloxyphenyl, Didodecylphenyl, Dioligo(ethyleneglykol)phenyl sowie verzweigte oder lineare Alkylketten eingeführt (siehe Abbildung 81). Der PBI-Farbstoff 5 wurde ausführlich im Hinblick auf sein Aggregationsverhalten untersucht. Konzentrationsabhängige 1H NMR- und UV/Vis Absorptionsmessungen haben klar gezeigt, dass im Lösungsmittel Chloroform dimere Strukturen ausgebildet werden. Begleitende Untersuchungen (2D NMR, VPO und ITC) bestätigten die ausschließliche Präsenz von Dimeren von 5 im experimentell zugänglichen Konzentrationsbereich. Molekulare Modellie-rungs-Studien, die durch NMR und FT-IR Untersuchungen unterstützt werden, illustrieren sehr gut die Ursachen für das Ausbleiben einer weiteren Aggregation zu größeren Strukturen. Die be-sondere Kombination aus den π-π-Wechselwirkungen und den Wasserstoffbrückenbindungen zwischen den NH-Gruppen der Amidfunktionen und den Carbonylsauerstoffen des PBI-Kerns sind demzufolge entscheidend für die Bildung des diskreten Dimer-Stapels (siehe Abbildung 82). Die Untersuchungen zum Aggregationsverhalten der PBI-Farbstoffe 6-9 waren weniger ausführ-lich, stehen aber im Einklang mit den für PBI 5 gefundenen Ergebnissen. Die ermittelten Bin-dungskonstanten variieren jedoch über einen beachtlichen Bereich von 1.1 x 102 M-1 (PBI 8) bis 1.4 x 104 M-1 (PBI 5). Diese Unterschiede konnten auf strukturelle Variationen der Farbstoffe zurückgeführt werden. Der elektronenreiche Phenylsubstituent förderte die Assemblierungsten-denz von PBIs 5-7 im Vergleich zu 8 und 9, die nur Alkylseitenkennten tragen. Die π-π-Wechselwirkungen der in den Buchpositionen unsubstituierten PBI-Kerne in Kombination mit wasserstoffbrückenbildenden Amidfunktionen steuern somit die Ausbildung diskreter Dimere dieser PBI-Farbstoffe. Durch die Variation der Bedingungen, beispielsweise des Lösungsmittels, ändert sich das Aggre-gationsverhalten der PBI-Farbstoffe. In den Lösungsmitteln Toluol und/oder Methylcyclohexan wurde für das PBI 5 anti-kooperatives Wachstum zu größeren Aggregaten beobachtet (Kapitel 4). Das entscheidende Merkmal dieses Selbstassemblierungsprozesses ist das Fehlen von isosbesti-schen Punkten über den kompletten Konzentrationsbereich in den UV/Vis Absorptionsmessun-gen. Die Bevorzugung der dimeren Struktur von PBI 5 blieb in beiden Lösungsmitteln bzw. de-ren Mischungen erhalten, allerdings assemblierten diese Dimere durch den Anstieg der Konzent-ration in größere Aggregate. Ein wichtiger Schritt im Selbstassemblierungsprozesses ist die bevor-zugte Bildung von geradzahligen Aggregaten gegenüber den ungeradzahligen Aggregaten (siehe Abbildung 83). Das konventionelle K2-K Modell liefert zwar plausible Bindungskonstanten, kann dieses Aggre-gationsverhalten aber nur ungenügend beschreiben, da hier von kontinuierlicher Größenverteilung ausgegangen wird. Der schrittweise Aggregationsprozess über Dimere, Tetramere, Hexamere usw. wurde daher im Folgenden mit einem neu entwickelten K2-K-Modell für anti-kooperatives supra-molekulares Wachstum analysiert. Durch die globale Analyse von UV/Vis Absorptionsspektren konnte eine sehr gute Übereinstimmung zwischen den experimentellen und den auf das neue K2-K Modell basierenden, simulierten Spektren erhalten werden. Des Weiteren zeigten berechnete UV/Vis Absorptionsspektren eines Dimer- und Aggregatspektrums die wichtigsten strukturellen Unterschiede. Das Absorptionsspektrum des Dimers weist immer noch eine ausgeprägte vibroni-sche Struktur auf, welche im Spektrum des Aggregats verloren geht. In einem weiteren Teil dieser Arbeit wird eine Serie von wasserlöslichen PBI-Farbstoffen be-schrieben, die ein ähnliches durch Aminosäuren funktionalisiertes PBI-Gerüst wie PBIs 5-8 auf-weisen (Kapitel 5). Aufgrund der positiv geladenen Seitenketten, die für die elektrostatische Ab-stoßung zwischen den Molekülen sorgen, aggregieren diese Farbstoffe in Wasser zu ähnlichen Dimerstrukturen (siehe Abbildung 84). Hier wurde allerdings das Selbstassemblierungsverhalten in Wasser aufgrund der strukturellen Ähnlichkeit zu bereits publizierten PBI-Farbstoffen nicht eingehend untersucht. Stattdessen lag der Fokus hier auf der Charakterisierung der Wechselwirkungen dieser Farbstoffe mit DNA/RNA. Die umfassenden Studien mit Hilfe von thermischen Denaturierungsstudien zeigten eine hohe Stabilität der PBI/Polynukleotid-Komplexe. Die Spermin-funktionalisierten PBI-Farbstoffe, welche sechs positive Ladungen aufweisen, zeigten starke Wechselwirkungen mit DNA/RNA, was sich durch deutliche Schmelzpunkterhöhung der DNA/RNA (ΔTm-Werte zwischen 7 und > 35 °C) äußerte. Die analogen Dioxa-Verbindungen mit nur zwei positiven La-dungen wiesen geringere Schmelztemperaturerhöhungen der jeweiligen DNA/RNA (ΔTm-Werte zwischen 3 und 30 °C) auf. Dieser Trend wurde auch in den fluorimetrischen Titrationsstudien beobachtet. Die Spermin-funktionalisierten PBI-Farbstoffe zeigten hohe Bindungskostanten (log Ks = 9.2 – 9.8), unabhängig von den verwendeten Polynukleotiden. Im Gegensatz dazu wie-sen die Dioxa-Analoge kleinere Bindungskonstanten (log Ks = 6.5 – 7.9) auf, wobei kein Zusam-menhang zwischen Bindungsaffinität und Bindungsstärke zwischen den PBI-Molekülen und den verwendeten Polynukleotiden hergestellt werden konnte. Die CD-spektroskopischen Messungen verdeutlichten die signifikanten Unterschiede in den Bindungseigenschaften der Farbstoffe mit DNA/RNA. Entscheidend waren die sterische Hinderung der Aminosäurereste in den Imidposi-tion und deren Konfiguration auf der einen Seite und die Furcheneigenschaften von ds-DNA/RNA auf der anderen Seite. Die spektroskopischen Ergebnisse belegten die Bildung von exzitonisch gekoppelten PBI-Dimeren in der kleinen Furche von ds-DNA und der großen Furche von ds-RNA. Die Furchen der Polynukleotide bieten unterschiedlich viel Raum für das Einbetten von Molekülen, was von der jeweiligen Sequenz abhängt. Die Guanin-Aminogruppen ragen in die kleine Furche des Polynukleotids poly(dG-dC)2, wodurch die sterische Hinderung im Vergleich mit dem Polynukleotid poly(dA-dT)2 zunimmt. Molekulare Modellierungsstudien belegten, dass die PBI-Dimere tiefer in die Furche von poly(dA-dT)2, als in die Furche von poly(dG-dC)2 einge-schlossen werden, was auf die eben genannte sterische Hinderung zurückgeführt werden kann (siehe Abbildung 85). KW - Perylentetracarbonsäurederivate KW - Perylene bisimide KW - Aggregat KW - Dimer-Konfiguration KW - DNS KW - aggregation KW - dimer KW - DNA Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136725 ER - TY - JOUR A1 - Zaho, Huaying A1 - Ghirlando, Rodolfo A1 - Alfonso, Carlos A1 - Arisaka, Fumio A1 - Attali, Ilan A1 - Bain, David L. A1 - Bakhtina, Marina M. A1 - Becker, Donald F. A1 - Bedwell, Gregory J. A1 - Bekdemir, Ahmet A1 - Besong, Tabot M. D. A1 - Birck, Catherine A1 - Brautigam, Chad A. A1 - Brennerman, William A1 - Byron, Olwyn A1 - Bzowska, Agnieszka A1 - Chaires, Jonathan B. A1 - Chaton, Catherine T. A1 - Coelfen, Helmbut A1 - Connaghan, Keith D. A1 - Crowley, Kimberly A. A1 - Curth, Ute A1 - Daviter, Tina A1 - Dean, William L. A1 - Diez, Ana I. A1 - Ebel, Christine A1 - Eckert, Debra M. A1 - Eisele, Leslie E. A1 - Eisenstein, Edward A1 - England, Patrick A1 - Escalante, Carlos A1 - Fagan, Jeffrey A. A1 - Fairman, Robert A1 - Finn, Ron M. A1 - Fischle, Wolfgang A1 - Garcia de la Torre, Jose A1 - Gor, Jayesh A1 - Gustafsson, Henning A1 - Hall, Damien A1 - Harding, Stephen E. A1 - Hernandez Cifre, Jose G. A1 - Herr, Andrew B. A1 - Howell, Elizabeth E. A1 - Isaac, Richard S. A1 - Jao, Shu-Chuan A1 - Jose, Davis A1 - Kim, Soon-Jong A1 - Kokona, Bashkim A1 - Kornblatt, Jack A. A1 - Kosek, Dalibor A1 - Krayukhina, Elena A1 - Krzizike, Daniel A1 - Kusznir, Eric A. A1 - Kwon, Hyewon A1 - Larson, Adam A1 - Laue, Thomas M. A1 - Le Roy, Aline A1 - Leech, Andrew P. A1 - Lilie, Hauke A1 - Luger, Karolin A1 - Luque-Ortega, Juan R. A1 - Ma, Jia A1 - May, Carrie A. A1 - Maynard, Ernest L. A1 - Modrak-Wojcik, Anna A1 - Mok, Yee-Foong A1 - Mücke, Norbert A1 - Nagel-Steger, Luitgard A1 - Narlikar, Geeta J. A1 - Noda, Masanori A1 - Nourse, Amanda A1 - Obsil, Thomas A1 - Park, Chad K A1 - Park, Jin-Ku A1 - Pawelek, Peter D. A1 - Perdue, Erby E. A1 - Perkins, Stephen J. A1 - Perugini, Matthew A. A1 - Peterson, Craig L. A1 - Peverelli, Martin G. A1 - Piszczek, Grzegorz A1 - Prag, Gali A1 - Prevelige, Peter E. A1 - Raynal, Bertrand D. E. A1 - Rezabkova, Lenka A1 - Richter, Klaus A1 - Ringel, Alison E. A1 - Rosenberg, Rose A1 - Rowe, Arthur J. A1 - Rufer, Arne C. A1 - Scott, David J. A1 - Seravalli, Javier G. A1 - Solovyova, Alexandra S. A1 - Song, Renjie A1 - Staunton, David A1 - Stoddard, Caitlin A1 - Stott, Katherine A1 - Strauss, Holder M. A1 - Streicher, Werner W. A1 - Sumida, John P. A1 - Swygert, Sarah G. A1 - Szczepanowski, Roman H. A1 - Tessmer, Ingrid A1 - Toth, Ronald T. A1 - Tripathy, Ashutosh A1 - Uchiyama, Susumu A1 - Uebel, Stephan F. W. A1 - Unzai, Satoru A1 - Gruber, Anna Vitlin A1 - von Hippel, Peter H. A1 - Wandrey, Christine A1 - Wang, Szu-Huan A1 - Weitzel, Steven E A1 - Wielgus-Kutrowska, Beata A1 - Wolberger, Cynthia A1 - Wolff, Martin A1 - Wright, Edward A1 - Wu, Yu-Sung A1 - Wubben, Jacinta M. A1 - Schuck, Peter T1 - A Multilaboratory Comparison of Calibration Accuracy and the Performance of External References in Analytical Ultracentrifugation JF - PLoS ONE N2 - Analytical ultracentrifugation (AUC) is a first principles based method to determine absolute sedimentation coefficients and buoyant molar masses of macromolecules and their complexes, reporting on their size and shape in free solution. The purpose of this multi-laboratory study was to establish the precision and accuracy of basic data dimensions in AUC and validate previously proposed calibration techniques. Three kits of AUC cell assemblies containing radial and temperature calibration tools and a bovine serum albumin (BSA) reference sample were shared among 67 laboratories, generating 129 comprehensive data sets. These allowed for an assessment of many parameters of instrument performance, including accuracy of the reported scan time after the start of centrifugation, the accuracy of the temperature calibration, and the accuracy of the radial magnification. The range of sedimentation coefficients obtained for BSA monomer in different instruments and using different optical systems was from 3.655 S to 4.949 S, with a mean and standard deviation of (4.304\(\pm\)0.188) S (4.4%). After the combined application of correction factors derived from the external calibration references for elapsed time, scan velocity, temperature, and radial magnification, the range of s-values was reduced 7-fold with a mean of 4.325 S and a 6-fold reduced standard deviation of \(\pm\)0.030 S (0.7%). In addition, the large data set provided an opportunity to determine the instrument-to-instrument variation of the absolute radial positions reported in the scan files, the precision of photometric or refractometric signal magnitudes, and the precision of the calculated apparent molar mass of BSA monomer and the fraction of BSA dimers. These results highlight the necessity and effectiveness of independent calibration of basic AUC data dimensions for reliable quantitative studies. KW - fluorescence-detected sedimentation KW - size exclusion chromatography KW - field flow fractionation KW - spinco ultracentrifuge KW - aggregation KW - bead models KW - velocity KW - hydrodynamics KW - biopharmaceuticals KW - proteins Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151903 VL - 10 IS - 5 ER - TY - JOUR A1 - Shityakov, Sergey A1 - Salvador, Ellaine A1 - Pastorin, Giorgia A1 - Förster, Carola T1 - Blood-brain barrier transport studies, aggregation, and molecular dynamics simulation of multiwalled carbon nanotube functionalized with fluorescein isothiocyanate JF - International Journal of Nanomedicine N2 - In this study, the ability of a multiwalled carbon nanotube functionalized with fluorescein isothiocyanate (MWCNT-FITC) was assessed as a prospective central nervous system-targeting drug delivery system to permeate the blood-brain barrier. The results indicated that the MWCNT-FITC conjugate is able to penetrate microvascular cerebral endothelial monolayers; its concentrations in the Transwell® system were fully equilibrated after 48 hours. Cell viability test, together with phase-contrast and fluorescence microscopies, did not detect any signs of MWCNT-FITC toxicity on the cerebral endothelial cells. These microscopic techniques also revealed presumably the intracellular localization of fluorescent MWCNT-FITCs apart from their massive nonfluorescent accumulation on the cellular surface due to nanotube lipophilic properties. In addition, the 1,000 ps molecular dynamics simulation in vacuo discovered the phenomenon of carbon nanotube aggregation driven by van der Waals forces via MWCN-TFITC rapid dissociation as an intermediate phase. KW - endothelial cells KW - cytotoxicity KW - blood-brain barrier KW - fluorescein isothiocyanate KW - aggregation KW - molecular dynamics KW - fluorescence microscopy KW - Transwell® system KW - multiwalled carbon nanotube KW - mice Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149233 VL - 10 ER - TY - THES A1 - Huber, Valerie T1 - Selbstorganisation von semisynthetischen Zinkchlorinen zu biomimetischen Lichtsammelsystemen und definierten Nanostrukturen T1 - Self-Assembly of Semi-Synthetic Zinc Chlorins into Biomimetic Light-Harvesting Systems and Defined Nanostructures N2 - Diese Arbeit beschäftigt sich mit der Selbstorganisation von Zinkchlorin-Farbstoffen, welche sich strukturell von Chlorophyllen ableiten. Im Gegensatz zu allen anderen bakteriellen und pflanzlichen Lichtsammelpigmenten ist es den Bakteriochlorophyllen c, d und e der Lichtsammelsysteme grüner phototropher Bakterien möglich, allein durch nichtkovalente Wechselwirkungen zwischen den Farbstoff-Molekülen, ohne die Beteiligung von Proteinen, röhrenförmige Antennensysteme auszubilden, welche die am dichtest gepackten und effizientesten Lichtsammelsysteme in der Natur darstellen. Um einen Betrag zur Aufklärung dieser biologisch wichtigen Aggregate zu leisten, wurden im ersten Teil dieser Arbeit Zinkchlorine als Modellverbindungen für BChl c hergestellt. Mit den neu synthetisierten Zinkchlorinen ist es gelungen, Modellsysteme der natürlichen BChl-Selbstorganisate herzustellen, welche sich im Gegensatz zu den bisher in der Literatur beschriebenen Zinkchlorin-Aggregaten durch eine gute und dauerhafte Löslichkeit auszeichnen. Diese Eigenschaft erlaubte es sowohl spektroskopische als auch mikroskopische Untersuchungen zur Aufklärung der Aggregatstruktur durchzuführen. Durch Rasterkraftmikroskopie an den Zinkchlorin Aggregaten konnte erstmals ein mikroskopischer Beweis der stabförmigen Struktur von Aggregaten dieser Substanzklasse erhalten werden. Der zweite Teil dieser Arbeit beschäftigt sich mit Zinkchlorinen, denen aufgrund einer methylierten 31-Hydroxy-Gruppe die Fähigkeit zur Röhrenbildung fehlt, die aber durch Koordinationsbindungen und p-p-Wechselwirkungen weiterhin Stapel bilden können. Temperaturabhängige UV/Vis- und CD-spektroskopische Studien offenbarten die reversible Bildung von löslichen, chiralen Zinkchlorin-Stapelaggregaten. Rasterkraft- und rastertunnelmikroskopische Untersuchungen zeigen die Bildung von zwei Typen p-gestapelter Aggregate auf hoch geordnetem Graphit. N2 - This work deals with the self-assembly of zinc chlorin dyes, which are structurally derived from chlorophylls. In contrast to all other bacterial and herbal light-harvesting pigments, the bacteriochlorophylls c, d and e of green phototropic bacteria are able to build tubular antennae solely by noncovalent interactions between the dye molecules, without any involvement of proteins, which represent the most densely packed and efficient light-harvesting systems in nature. To contribute to the structural elucidation of this biologically important aggregates, in the first part of this work zinc chlorins were synthesized as model compounds for BChl c. With the newly synthesized zinc chlorins it was possible to build model systems of the natural BChl self-assemblies that are, in contrast to literature known zinc chlorin aggregates, characterized by a proficient and durable solubility. This favourable property allows spectroscopic as well as microscopic investigations for the elucidation of the aggregate structure. Atomic force microscopy of the aggregates provided by the first time also a microscopic evidence for the rod-shaped structure of the aggregates of this class of substances. The second part of this work deals with the zinc chlorins, which lack the possibility of forming tubular aggregates because of a methylated 31-hydroxy group, but they may still form stacks by coordinative bonds and p-p interactions. Temperature-dependent UV/Vis and CD spectroscopic studies bare the reversible formation of soluble and chiral stacked aggregates of zinc chlorins. Atomic force and scanning tunnelling microscopic studies show the formation of two different types of p-stacked aggregates on highly ordered graphite surface. KW - Farbstoff KW - Scheibe-Aggregat KW - Chlorophyllderivate KW - Selbstorganisation KW - Bakteriochlorophyll KW - Kraftmikroskopie KW - Rastertunnelmikroskopie KW - aggregation KW - chlorophyll KW - dyes KW - self-assembly KW - zinc chlorins. Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24517 ER -