TY - JOUR A1 - Messi, Bernadette Biloa A1 - Ndjoko-Ioset, Karine A1 - Hertlein-Amslinger, Barbara A1 - Lannang, Alain Meli A1 - Nkengfack, Augustin E. A1 - Wolfender, Jean-Luc A1 - Hostettmann, Kurt A1 - Bringmann, Gerhard T1 - Preussianone, a New Flavanone-Chromone Biflavonoid from Garcinia preussii Engl. JF - Molecules N2 - A new flavanone-chromone biflavonoid, preussianone (1), has been isolated from the leaves of Garcinia preussii, along with four known biflavonoids. The absolute stereostructures were elucidated by chemical, spectroscopic, and chiroptical methods. The biological properties of the new biflavonoid against several bacterial strains were evaluated. KW - multiflora KW - minimal inhibitory concentration KW - absolute configuration KW - circular dichroism KW - C-13 NMR KW - guttiferae KW - flavenoids KW - extractives KW - biflavanoids KW - livingstonei KW - high-temperature NMR KW - antibacterial activity KW - Garcinia biflavonoids Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130881 VL - 17 IS - 5 ER - TY - JOUR A1 - Merz, Viktor A1 - Merz, Julia A1 - Kirchner, Maximilian A1 - Lenhart, Julian A1 - Marder, Todd B. A1 - Krueger, Anke T1 - Pyrene-Based "Turn-Off" Probe with Broad Detection Range for Cu\(^{2+}\), Pb\(^{2+}\) and Hg\(^{2+}\) Ions JF - Chemistry—A European Journal N2 - Detection of metals in different environments with high selectivity and specificity is one of the prerequisites of the fight against environmental pollution with these elements. Pyrenes are well suited for the fluorescence sensing in different media. The applied sensing principle typically relies on the formation of intra- and intermolecular excimers, which is however limiting the sensitivity range due to masking of e. g. quenching effects by the excimer emission. Herein we report a highly selective, structurally rigid chemical sensor based on the monomer fluorescence of pyrene moieties bearing triazole groups. This sensor can quantitatively detect Cu\(^{2+}\), Pb\(^{2+}\) and Hg\(^{2+}\) in organic solvents over a broad concentrations range, even in the presence of ubiquitous ions such as Na\(^{+}\), K\(^{+}\), Ca\(^{2+}\) and Mg\(^{2+}\). The strongly emissive sensor's fluorescence with a long lifetime of 165 ns is quenched by a 1 : 1 complex formation upon addition of metal ions in acetonitrile. Upon addition of a tenfold excess of the metal ion to the sensor, agglomerates with a diameter of about 3 nm are formed. Due to complex interactions in the system, conventional linear correlations are not observed for all concentrations. Therefore, a critical comparison between the conventional Job plot interpretation, the method of Benesi-Hildebrand, and a non-linear fit is presented. The reported system enables the specific and robust sensing of medically and environmentally relevant ions in the health-relevant nM range and could be used e. g. for the monitoring of the respective ions in waste streams. KW - probes KW - fluorescence spectroscopy KW - pyrene KW - heavy metals KW - luminescence Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256803 VL - 27 IS - 31 ER - TY - THES A1 - Merz, Viktor T1 - Funktionalisierung und Untersuchung von Nanodiamanten für biomedizinische und sensorische Anwendungen T1 - Functionalization and Investigation of Nanodiamonds for Biomedical and Sensor Applications N2 - Nanodiamant (ND) ist ein vielseitiges und vielversprechendes Material für Bio-Anwendungen. Trotz vieler Bemühungen bleibt die Agglomeration von Nanodiamant und die unspezifische Adsorption von Proteinen an der ND-Oberfläche bei Kontakt mit Bioflüssigkeiten ein großes Hindernis für biomedizinische Anwendungen. Eine Auswahl verzweigter und linearer Moleküle mit überlegener Fähigkeit zur kolloidalen Stabilisierung von Nanopartikeln in Salz- und Zellmedienumgebung, für bis zu 30 Tage, wurde an die ND-Oberfläche angebracht. Das Baukastensystem mit Azid als Außengruppen bietet eine große Vielfalt an Bindungen mit vielen Molekülen, wie z. B. Medikamenten, Farbstoffen oder Targeting-Molekülen. Das Anhängen von z. B. Zwitterionen an die Kette schützt die ND-Oberfläche vor der Bildung einer Proteinkorona, wenn die Partikel mit proteinhaltigen Bioflüssigkeiten in Kontakt kommen. Die Ergebnisse der thermogravimetrischen Analyse der Beladung der ND-Oberfläche zeigen eine signifikante Verhinderung der Proteinadsorption von bis zu 98 % im Vergleich zu NDs ohne zwitterionische Kopfgruppen und eine lange kolloidale Stabilität, wenn Tetraethylenglykol (TEG) an die Oberfläche gebunden wird. Die Vielseitigkeit des modularen Systems, um nicht nur zwitterionische Ketten, sondern auch klickbare funktionelle Moleküle an fluoreszierende Nanodiamanten (fNDs) zu binden, zeigt das Potenzial des Systems am Nanodiamanten. Unter Verwendung von Defektstrukturen, wie Stickstoff-Vakanz-Zentren (NV), können Diamantpartikel aufgrund ihres weitgehend ungiftigen Verhaltens als fluoreszierende Nanodiamanten (fNDs) für photostabile Markierung, Bioimaging und nanoskalige Sensorik in lebenden Zellen und Organismen verwendet werden. Um die fND-Oberfläche zu funktionalisieren, wurde eine neuartige Mahltechnik mit Diazoniumsalzen etabliert, um ein Pfropfen auf wenig reaktive HPHT-fNDs durchzuführen, was zu einer hohen Oberflächenbeladung und einem hohen negativen Zetapotenzial führt. Die Kombination der Vorteile von TEG und zwitterionhaltigen Gruppen mit der Fähigkeit zum Targeting von Antikörpern auf fND bestätigt zum ersten Mal die verbesserte kolloidale Stabilität in Experimenten mit lebenden Zellen. Darüber hinaus deuten die Ergebnisse auf eine verbesserte Corona-Abstoßung im Vergleich zu fND ohne zwitterionhaltige Kopfgruppen hin. Infolgedessen wurden die Zirkulationszeiten von 4 (fND ohne Zwitterionenkette, aber mit Antikörper) auf 17 (mit Antikörper und Zwitterionenketten) Stunden vergrößert. In nicht-biomedizinischen Anwendungen kann das modulare System als Sonde für Schwermetalle durch die Anbindung von Farbstoffen verwendet werden. Die Detektion von Metallen in verschiedenen Umgebungen mit hoher Selektivität und Spezifität ist eine der Voraussetzungen für den Kampf gegen die Umweltverschmutzung mit diesen Elementen. Pyrene sind gut geeignet und weit bekannt für die Fluoreszenzsensorik in verschiedenen Medien. Das angewandte Sensorprinzip beruht typischerweise auf der Bildung von intra- und intermolekularen Excimeren, was jedoch den Empfindlichkeitsbereich aufgrund der Maskierung von z.B. Quenching-Effekten durch die Excimer-Emission einschränkt. Diese Studie zeigt einen hochselektiven, strukturstabilen chemischen Sensor, der auf der monomeren Fluoreszenz von Pyrenanteilen mit Triazolgruppen basiert. Dieser Sensor kann Cu2+, Pb2+ und Hg2+ in organischen Lösungsmitteln über einen weiten Konzentrationsbereich quantitativ nachweisen, auch in Gegenwart von ubiquitären Ionen wie Na+, K+, Ca2+ und Mg2+. Die stark emittierende Fluoreszenz des Sensors mit einer langen Lebensdauer von 165 ns wird durch eine 1:1-Komplexbildung bei Zugabe von Metallionen in Acetonitril gelöscht. Bei Zugabe eines zehnfachen Überschusses des Metallions zum Sensor bilden sich Agglomerate mit einem Durchmesser von etwa 3 nm. Aufgrund der komplexen Wechselwirkungen im System werden konventionelle lineare Korrelationen nicht für alle Konzentrationen beobachtet. Daher wird ein kritischer Vergleich zwischen der konventionellen Job-Plot-Interpretation, der Methode von Benesi-Hildebrand und einem nicht-linearen Fit vorgestellt. Das vorgestellte System ermöglicht die spezifische und robuste Erfassung von medizinisch und ökologisch relevanten Ionen im gesundheitsrelevanten nM-Bereich und könnte z. B. zur Überwachung der entsprechenden Ionen in Abfallströmen eingesetzt werden. Doch häufig landen diese Abfallströme in empfindlichen Aquakulturen, wo eine solche Sensortechnik nur funktioniert, wenn die Sonde wasserlöslich ist, um die Ausbreitung und Bildung von Umweltschäden durch Schwermetalle zu überwachen. Viele Chemosensoren arbeiten nur in bestimmten Lösungsmitteln und unter hochreinen Bedingungen quantitativ. In dieser Arbeit wird eine Methode zur Stabilisierung von wasserunlöslichen Chemosensoren auf Nanodiamanten in salzhaltigem Wasser unter Beibehaltung der Sensoreffektivität und -spezifität sowie der kolloidalen Stabilität vorgestellt. Zusätzlich wird die Sensorfähigkeit in organischen Lösungsmitteln beibehalten. Diese Studie gibt Einblick in die Absorptionsfähigkeit von Pyren-Derivaten an der Nanodiamant-Oberfläche und einen Weg, diese reversibel zu desorbieren. Außerdem beweist das System, dass in Anwesenheit von 95 % Sauerstoffatmosphäre bei der Fluoreszenzmessung die Ergebnisse nicht von denen in Argonatmosphäre abweichen. Darüber hinaus stört das Vorhandensein gängiger Ionen im Wasser die kolloidale Stabilität der NDs nicht und hat auch keinen Einfluss auf die Sensorfunktionalität und ist somit ein vielversprechender Kandidat für Messungen ohne aufwändige Präparationsschritte. N2 - Nanodiamond (ND) is a versatile and promising material for bio-applications. Despite many efforts, agglomeration of nanodiamond and the non-specific adsorption of proteins on the ND surface when exposed to bio-fluids remains a major obstacle for biomedical applications. An assortment of branched and linear molecules with superior ability to colloidally stabilize nanoparticles in salt and cell media environment, for up to 30 days, was attached to the ND’s surface. The building box system with azide as external groups offers a huge variety of binding with many molecules, such as drugs, dyes or targeting molecules, is possible. Clicking, for instance, zwitterions moieties to the chain protects ND surface from protein corona forming when the particles get in contact with biofluids containing proteins. Thermogravimetric analysis results of the ND surface loading show a significant prevention of up to 98 % of the protein adsorption compared with NDs without zwitterionic headgroups and long colloidal stability when tetraethylene glycol (TEG) are attached to the surface. The versatility of the modular system to bind not only zwitterionic chains but also clickable functional molecules to fluorescent nanodiamonds (fNDs) demonstrates the potential of the system at the nanodiamond. Using defect structures, such as nitrogen-vacancy (NV) centers, diamond particles, due to their widely non-toxic behavior, can be used as fNDs for photostable labeling, bioimaging and nanoscale sensing in living cells and organisms. To functionalize the fND surface a novel milling technique with diazonium salts was established to perform grafting on poorly reactive HPHT fNDs yielding in high surface loading and high negative zeta potential. Combining the benefits of TEG and zwitterion containing groups with antibody enabled nucleus targeting ability on fND confirms the enhanced colloidal stability in living cells experiments for the first time. Furthermore, the results indicate an improved corona repulsion compared with fND without zwitterion containing headgroups. As a result, the circulation times were enlarged from 4 (fND without zwitterion chain but with antibody) to 17 (with antibody and zwitterion chains) hours. In non-biomedical applications, the modular system can be used as a probe for heavy metals by binding it to dyes. Detection of metals in different environments with high selectivity and specificity is one of the prerequisites of the fight against environmental pollution with these elements. Pyrenes are well suited and known for fluorescence sensing in different media. The applied sensing principle typically relies on the formation of intra- and intermolecular excimers, which is however limiting the sensitivity range due to masking of e.g. quenching effects by the excimer emission. This study shows a highly selective, structurally rigid chemical sensor based on the monomer fluorescence of pyrene moieties bearing triazole groups. This probe can quantitatively detect Cu2+, Pb2+ and Hg2+ in organic solvents over a broad concentration range, even in the presence of ubiquitous ions such as Na+, K+, Ca2+ and Mg2+. The strongly emissive sensor’s fluorescence with a long lifetime of 165 ns is quenched by a 1:1 complex formation upon addition of metal ions in acetonitrile. Upon addition of a tenfold excess of the metal ion to the sensor, agglomerates with a diameter of about 3 nm are formed. Due to complex interactions in the system, conventional linear correlations are not observed for all concentrations. Therefore, a critical comparison between the conventional Job plot interpretation, the method of Benesi-Hildebrand, and a non-linear fit is presented. The reported system enables the specific and robust sensing of medically and environmentally relevant ions in the health-relevant nM range and could be used e.g. for the monitoring of the respective ions in waste streams. Nonetheless, often these waste streams end up in sensitive aquacultures, where such sensor technology only works if the probe is water-soluble to monitor the spread and formation of environmental damage from heavy metals. Many chemosensors only work quantitatively in specific solvents and under highly pure conditions. In this thesis a method to stabilize water-insoluble chemosensors on nanodiamonds in saline water while maintaining the sensor efficacy and specificityas as well as colloidal stability is presented. Additionally, the sensor capability is retained in organic solvents. This study provides insight into the absorptivity of pyrene derivatives to the nanodiamond surface and a way to reversibly desorb them. Moreover, the system proves that in presence of 95 % oxygen atmosphere while the fluoresce measurement the results of the do not vary from the one in argon atmosphere. Furthermore, the presence of common ions in water do not disturb the colloidal stability of the NDs and also no influence the sensor functionality and thus is highly promising candidate for measurement without cumbersome preparation steps. KW - Chemosensor KW - Nanodiamant KW - Kolloidalstabilität KW - Protein Corona KW - Targeting Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245888 ER - TY - JOUR A1 - Merz, Julia A1 - Dietz, Maximilian A1 - Vonhausen, Yvonne A1 - Wöber, Frederik A1 - Friedrich, Alexandra A1 - Sieh, Daniel A1 - Krummenacher, Ivo A1 - Braunschweig, Holger A1 - Moos, Michael A1 - Holzapfel, Marco A1 - Lambert, Christoph A1 - Marder, Todd B. T1 - Synthesis, Photophysical and Electronic Properties of New Red-to-NIR Emitting Donor-Acceptor Pyrene Derivatives JF - Chemistry - A European Journal N2 - We synthesized new pyrene derivatives with strong bis(para ‐methoxyphenyl)amine donors at the 2,7‐positions and n ‐azaacene acceptors at the K‐region of pyrene. The compounds possess a strong intramolecular charge transfer, leading to unusual properties such as emission in the red to NIR region (700 nm), which has not been reported before for monomeric pyrenes. Detailed photophysical studies reveal very long intrinsic lifetimes of >100 ns for the new compounds, which is typical for 2,7‐substituted pyrenes but not for K‐region substituted pyrenes. The incorporation of strong donors and acceptors leads to very low reduction and oxidation potentials, and spectroelectrochemical studies show that the compounds are on the borderline between localized Robin‐Day class‐II and delocalized Robin‐Day class‐III species. KW - orylation KW - K-region KW - luminescence KW - polycyclic aromatic hydrocarbons KW - redox Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207486 VL - 26 IS - 2 ER - TY - JOUR A1 - Merz, Julia A1 - Dietrich, Lena A1 - Nitsch, Jörn A1 - Krummenacher, Ivo A1 - Braunschweig, Holger A1 - Moos, Michael A1 - Mims, David A1 - Lambert, Christoph A1 - Marder, Todd B. T1 - Synthesis, Photophysical and Electronic Properties of Mono‐, Di‐, and Tri‐Amino‐Substituted Ortho‐Perylenes, and Comparison to the Tetra‐Substituted Derivative JF - Chemistry – A European Journal N2 - We synthesized a series of new mono‐, di‐, tri‐ and tetra‐substituted perylene derivatives with strong bis(para‐methoxyphenyl)amine (DPA) donors at the uncommon 2,5,8,11‐positions. The properties of our new donor‐substituted perylenes were studied in detail to establish a structure‐property relationship. Interesting trends and unusual properties are observed for this series of new perylene derivatives, such as a decreasing charge transfer (CT) character with increasing number of DPA moieties and individual reversible oxidations for each DPA moiety. Thus, (DPA)‐Per possesses one reversible oxidation while (DPA)\(_{4}\)‐Per has four. The mono‐ and di‐substituted derivatives display unusually large Stokes shifts not previously reported for perylenes. Furthermore, transient absorption measurements of the new derivatives reveal an excited state with lifetimes of several hundred microseconds, which sensitizes singlet oxygen with quantum yields of up to 0.83. KW - borylation KW - intersystem crossing KW - luminescence KW - polycyclic aromatic hydrocarbon KW - triarylamine Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-217835 VL - 26 IS - 52 SP - 12050 EP - 12059 ER - TY - THES A1 - Menekşe, Kaan T1 - Fabrication of Organic Solar Cells, Screening of Non-Fullerene Acceptors and the Investigation of their Intermolecular Interactions T1 - Herstellung von organischen Solarzellen, Screening von Nicht-Fulleren-Akzeptoren und die Untersuchung ihrer intermolekularen Wechselwirkungen N2 - In this thesis, intermolecular acceptor-acceptor interactions in organic solar cells based on new non-fullerene acceptors are addressed. For this purpose, first the reproducibility of organic electronic devices was tested on a new facility for their fabrication. This was followed by the screening for new acceptor materials. Based on this, three molecular systems were investigated with regard to their acceptor-acceptor interactions and their influence on solar cell efficiency. N2 - In der vorliegenden Doktorarbeit werden zwischenmolekulare Akzeptor-Akzeptor Wechselwirkungen in organischen Solarzellen auf Basis von neuen nichtfulleren Akzeptoren behandelt. Dazu wurde zuerst die Reproduzierbarkeit von organischen Bauteilelementen an einer neuen Anlage zur Fertigung ebendieser getestet. Anschließend erfolgte die Suche nach neuen Akzeptormaterialien. Darauf aufbauend wurden drei Molekülsysteme hinsichtlich ihrer Akzeptor-Akzeptor Wechselwirkungen und deren Einfluss auf die Solarzelleneffizienz untersucht. KW - Organische Solarzelle KW - Nicht-Fulleren Akzeptor KW - Non-Fullerene Acceptor KW - Intermolekulare Wechselwirkungen KW - Intermolecular Interactions Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-291124 ER - TY - JOUR A1 - Menekse, Kaan A1 - Renner, Rebecca A1 - Mahlmeister, Bernhard A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Bowl-shaped naphthalimide-annulated corannulene as nonfullerene acceptor in organic solar cells JF - Organic Materials N2 - An electron-poor bowl-shaped naphthalimide-annulated corannulene with branched alkyl residues in the imide position was synthesized by a palladium-catalyzed cross-coupling annulation sequence. This dipolar compound exhibits strong absorption in the visible range along with a low-lying LUMO level at –3.85 eV, enabling n-type charge transport in organic thin-film transistors. Furthermore, we processed inverted bulk-heterojunction solar cells in combination with the two donor polymers PCE–10 and PM6 to achieve open-circuit voltages up to 1.04 V. By using a blend of the self-assembled naphthalimide-annulated corannulene and PCE–10, we were able to obtain a power conversion efficiency of up to 2.1%, which is to the best of our knowledge the highest reported value for a corannulene-based organic solar cell to date. KW - Chemie KW - corannulene KW - nonfullerene acceptors KW - curved π-systems KW - bulk-heterojunction solar cells KW - aggregation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-299095 UR - https://www.thieme-connect.com/products/ejournals/html/10.1055/s-0040-1714283 SN - 2625-1825 VL - 2 IS - 3 ER - TY - JOUR A1 - Menekse, Kaan A1 - Mahl, Magnus A1 - Albert, Julius A1 - Niyas, M. A. A1 - Shoyama, Kazutaka A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Supramolecularly Engineered Bulk‐Heterojunction Solar Cells with Self‐Assembled Non‐Fullerene Nanographene Tetraimide Acceptors JF - Solar RRL N2 - A series of novel imide‐functionalized C\(_{64}\) nanographenes is investigated as acceptor components in organic solar cells (OSCs) in combination with donor polymer PM6. These electron‐poor molecules either prevail as a monomer or self‐assemble into dimers in the OSC active layer depending on the chosen imide substituents. This allows for the controlled stacking of electron‐poor and electron‐rich π–scaffolds to establish a novel class of non‐fullerene acceptor materials to tailor the bulk‐heterojunction morphology of the OSCs. The best performance is observed for derivatives that are able to self‐assemble into dimers, reaching power conversion efficiencies of up to 7.1%. KW - nanographene KW - non-fullerene acceptors KW - organic solar cells KW - polycyclic aromatic hydrocarbons KW - self-assembly Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312099 VL - 7 IS - 2 ER - TY - JOUR A1 - Markgraf, J. H. A1 - Cort, J. R. A1 - Davis, H. A. A1 - Lindeman, N. I. A1 - Myers, C. R. A1 - Kraft, A. A1 - Christl, Manfred T1 - Strained Heterocyclic Systems. 20. Basicities of Bicyclic Quinoxalines N2 - No abstract available KW - Organische Chemie Y1 - 1991 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58584 ER - TY - THES A1 - Maksimenka, Katsiaryna T1 - Absolute Configuration by Circular Dichroism: Quantum Chemical CD Calculations T1 - Absolute Konfiguration durch Circular-Dichroismus: Quantenchemische Rechnungen des Circular-Dichroismus (CD) N2 - Quantum chemical calculations of circular dichroism (CD) spectra in combination with experimental CD studies are one of the most efficient analytical tools for the elucidation of the three-dimensional structure of a chiral molecule. In the present work 18 chiral compounds of most different molecular structures and origins were investigated using various theoretical methods (the semiempirical CIS methods, the time-dependent DFT and DFT/MRCI approaches). The advantages and limitations of the applied methods were discussed in the context of the studied compounds. Furthermore, the last part of this work deals with the CD investigations of a chiral compound in the crystalline state. A well-known natural product with a specific conformation/CD spectrum behavior was used as a model compound to examine a novel solid-state CD method and to investigate the possibility of its improvement to provide a higher reliability for the assignment of the absolute configuration. N2 - Quantenchemische Rechnungen des Circular-Dichroismus (CD) in Kombination mit experimentellen CD-Studien sind eines der besten analytischen Werkzeuge zur Aufklärung der dreidimensionalen Struktur eines chiralen Moleküls. In der vorliegenden Arbeit wurden 18 chirale Verbindungen mit unterschiedlichsten Strukturen und von unterschiedlichster Herkunft unter Verwendung von verschiedenen theoretischen Methoden (semiempirische CIS-Methoden, zeitabhängige DFT- und DFT/MRCI-Ansätze) untersucht. Die Vorteile und Grenzen der angewandten Methoden wurden im Rahmen der untersuchten Verbindungen diskutiert. Desweiteren befasst sich der letzte Teil der vorliegenden Arbeit mit den CD-Untersuchungen einer chiralen Verbindung im kristallinen Zustand. Ein bekannter Naturstoff mit einem spezifischen Konformation/CD-Spektrum-Verhalten wurde als Modellverbindung verwendet, um einen neuartige Festkörper-CD-Ansatz zu testen, und um die Möglichkeit seiner Verbesserung zu untersuchen, um eine höhere Zuverlässlichkeit für die Zuordnung der absoluten Konfiguration zu bieten. KW - Circular-Dichroismus KW - Quantenchemie KW - Konfiguration KW - Quantenchemische Rechnungen KW - Absolute Konfiguration KW - Absolute Configuration KW - Circular Dichroism KW - Quantum Chemical CD Calculations Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56552 ER - TY - THES A1 - Mahlmeister, Bernhard T1 - Twisted Rylene Bisimides for Organic Solar Cells and Strong Chiroptical Response in the Near Infrared T1 - Kernverdrillte Rylenbisimide für organische Solarzellen und starke chirooptische Eigenschaften im Nahinfrarot N2 - The chirality of the interlocked bay-arylated perylene motif is investigated upon its material prospect and the enhancement of its chiroptical response to the NIR spectral region. A considerable molecular library of inherently chiral perylene bisimides (PBIs) was utilized as acceptors in organic solar cells to provide decent device performances and insights into the structure-property relationship of PBI materials within a polymer blend. For the first time in the family of core-twisted PBIs, the effects of enantiopurity on the device performance was thoroughly investigated. The extraordinary structural sensitivity of CD spectroscopy served as crucial analytical tool to bridge the highly challenging gap between molecular properties and device analytics by proving the excitonic chirality of a helical PBI dimer. The chirality of this perylene motif could be further enhanced on a molecular level by both the expansion and the enhanced twisting of the π-scaffold to achieve a desirable strong chiroptical NIR response introducing a new family of twisted QBI-based nanoribbons. These achievements could be substantially further developed by expanding this molecular concept to a supramolecular level. The geometrically demanding supramolecular arrangement necessary for the efficient excitonic coupling was carefully encoded into the molecular design. Accordingly, the QBIs could form the first J-type aggregate constituting a fourfold-stranded superhelix of a rylene bisimide with strong excitonic chirality. Therefore, this thesis has highlighted the mutual corroboration of experimental and theoretical data from the molecular to the supramolecular level. It has demonstrated that for rylene bisimide dyes, the excitonic contribution to the overall chiroptical response can be designed and rationalized. This can help to pave the way for new organic functional materials to be used for chiral sensing or chiral organic light-emitting devices. N2 - Die Chiralität des verzahnten Bucht-arylierten Perylenmotivs wurde im Hinblick auf seine Materialanwendung sowie die Verstärkung seiner chiroptischen Eigenschaften im NIR-Spektralbereich untersucht. Eine umfangreiche Molekülbibliothek von inhärent chiralen PBIs wurde als NFAs in OSCs verwendet, um sowohl gute Solarzelleneffizienzen sowie Einblicke in die Struktur-Eigenschafts-Beziehung von PBI Materialien innerhalb einer Polymermischung zu erhalten. Zum ersten Mal wurden für kernverdrillte PBIs die Auswirkungen der Enantiomerenreinheit auf die Effizienz von organischen Dünnfilmbauteilen untersucht. Die außerordentliche strukturelle Empfindlichkeit der CD Spektroskopie diente als entscheidendes Analysewerkzeug, um die hoch anspruchsvolle Lücke zwischen der Analytik molekularer Eigenschaften und der Bauteilanalytik zu schließen, indem die exzitonische Chiralität eines helikalen PBI-Dimers nachgewiesen wurde. Die Chiralität dieses Perylenmotivs konnte auf molekularer Ebene weiter verstärkt werden, indem das π-Gerüst sowohl erweitert als auch stärker verdrillt wurde, um wünschenswert starke chiroptische Eigenschaften im NIR-Bereich zu erzielen und so eine neue Molekülfamilie kernverdrillter QBIs zu definieren. Diese Errungenschaften konnten durch die Ausweitung dieses molekularen Konzepts auf eine supramolekulare Ebene noch erheblich weiterentwickelt werden. Die geometrisch anspruchsvolle supramolekulare Anordnung, die für die effiziente exzitonische Kopplung erforderlich ist, wurde sorgfältig in das molekulare Design kodiert. Dementsprechend stellt das präsentierte QBI in seiner vierfach versetzt gestapelten Superhelix das erste Rylenbisimid-J-Aggregat dar, welches eine starke exzitonische Chiralität zeigt. Somit hat die Arbeit hat die gegenseitige Bestätigung von experimentellen und theoretischen Daten von der molekularen bis hin zur supramolekularen Ebene herausgestellt und gezeigt, dass für Rylenbisimid-Farbstoffe der exzitonische Beitrag zu den chiroptischen Eigenschaften konzipiert, synthetisch realisiert und quantenmechanisch verstanden werden kann. Dies kann den Weg für neue organische Funktionsmaterialien ebnen, die für chirale Sensoren oder Licht emittierende Bauteile verwendet werden können. KW - Molekül KW - Chiralität KW - Exziton KW - Organische Solarzelle KW - Supramolekulare Chemie KW - organic solar cell KW - non-fullerene acceptor KW - perylene bisimide KW - quaterrylene bisimide KW - inherent chirality KW - excitonic chirality KW - supramolecular chemistry KW - self-assembly KW - near infrared chirality Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-346106 ER - TY - JOUR A1 - Mahl, Magnus A1 - Shoyama, Kazutaka A1 - Krause, Ana‐Maria A1 - Schmidt, David A1 - Würthner, Frank T1 - Base‐Assisted Imidization: A Synthetic Method for the Introduction of Bulky Imide Substituents to Control Packing and Optical Properties of Naphthalene and Perylene Imides JF - Angewandte Chemie International Edition N2 - We report the direct imidization of naphthalene and perylene dicarboxylic anhydrides/esters with bulky ortho,ortho‐diaryl‐ and ortho,ortho‐dialkynylaniline derivatives. This imidization method uses n‐butyllithium as a strong base to increase the reactivity of bulky amine derivatives, proceeds under mild reaction conditions, requires only stoichiometric amounts of reactants and gives straightforward access to new sterically crowded rylene dicarboximides. Mechanistic investigations suggest an isoimide as intermediary product, which was converted to the corresponding imide upon addition of an aqueous base. Single‐crystal X‐ray diffraction analyses reveal dimeric packing motifs for monoimides, while two‐side shielded bisimides crystallize in isolated molecules without close π–π‐interactions. Spectroscopic investigations disclose the influence of the bulky substituents on the optical properties in the solid state. KW - dyes KW - fluorescence KW - imidization KW - perylene imide KW - solid-state emitters Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-218246 VL - 59 IS - 32 SP - 13401 EP - 13405 ER - TY - THES A1 - Mahl, Magnus T1 - Polycyclic Aromatic Dicarboximides as NIR Chromophores, Solid-State Emitters and Supramolecular Host Platforms T1 - Polyzyklische aromatische Dicarboximide als NIR-Chromophore, Festkörperemitter und supramolekulare Wirtsplattformen N2 - The present thesis introduce different synthetic strategies towards a variety of polycyclic aromatic dicarboximides (PADIs) with highly interesting and diverse properties. This included tetrachlorinated, tetraaryloxy- and tetraaryl-substituted dicarboximides, fused acceptor‒donor(‒acceptor) structures as well as sterically shielded rylene and nanographene dicarboximides. The properties and thus the disclosure of structure‒property relationships of the resulting dyes were investigated in detail among others with UV‒vis absorption spectroscopy, fluorescence spectroscopy, cyclic voltammetry and single crystal X-ray analysis. For instance, some of the fused and substituted PADIs offer strong absorption of visible and near infrared (NIR) light, NIR emission and low-lying LUMO levels. On the contrary, intriguing optical features in the solid-state characterize the rylene dicarboximides with their bulky N-substituents, while the devised sterically enwrapped nanographene host offered remarkable complexation capabilities in solution. N2 - Die vorliegende Arbeit stellt verschiedene Synthesestrategien für eine Vielfalt an polyzyklischen aromatischen Dicarboximiden (PADIs) mit hochinteressanten und vielfältigen Eigenschaften vor. Dies beinhaltete tetrachlorierte, tetraryloxy- und tetraaryl-substituierte Dicarboximide, fusionierte Akzeptor‒Donor(‒Akzeptor)-Strukturen wie auch sterisch abgeschirmte Rylen- und Nanographen-Dicarboximide. Die Eigenschaften und damit die Offenlegung von Struktur‒Eigenschaftsbeziehungen der resultierenden Farbstoffe wurden unter anderem mittels UV‒vis Absorptionsspektroskopie, Fluoreszenzspektroskopie, Zyklovoltammetrie und Einkristallstrukturanalyse detalliert untersucht. Zum Beispiel bieten einige der fusionierten und substituierten PADIs eine starke Absorption von sichtbaren und nahen Infrarot-Licht (NIR), NIR-Emission und niedrigliegende LUMO-Niveaus. Im Gegensatz dazu sind die Rylendicarboximide mit ihren voluminösen N-Substituenten durch faszinierende optische Eigenschaften im Festkörper charakterisiert, wohingegen der konzipierte sterisch eingehüllte Nanographen-Wirt bemerkenswerte Komplexierungs-Fähigkeiten in Lösung zeigte. KW - Organische Chemie KW - Perylenbisdicarboximide KW - Farbstoff KW - Fluoreszenz KW - Supramolekulare Chemie KW - C-C coupling KW - dicarboximide KW - NIR chromophore KW - solid-state emitter KW - host-guest chemistry Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234623 ER - TY - INPR A1 - Maghami, Mohammad Ghaem A1 - Scheitl, Carolin P. M. A1 - Höbartner, Claudia T1 - Direct in vitro selection of trans-acting ribozymes for posttranscriptional, site-specific, and covalent fluorescent labeling of RNA T2 - Journal of the American Chemical Society N2 - General and efficient tools for site-specific fluorescent or bioorthogonal labeling of RNA are in high demand. Here, we report direct in vitro selection, characterization, and application of versatile trans-acting 2'-5' adenylyl transferase ribozymes for covalent and site-specific RNA labeling. The design of our partially structured RNA pool allowed for in vitro evolution of ribozymes that modify a predetermined nucleotide in cis (i.e. intramolecular reaction), and were then easily engineered for applications in trans (i.e. in an intermolecular setup). The resulting ribozymes are readily designed for specific target sites in small and large RNAs and accept a wide variety of N6-modified ATP analogues as small molecule substrates. The most efficient new ribozyme (FH14) shows excellent specificity towards its target sequence also in the context of total cellular RNA. KW - covalent and site-specific RNA labeling KW - trans-acting 2'-5' adenylyl transferase ribozymes KW - in vitro selection from a structured RNA library KW - Ribozyme-catalyzed RNA labeling KW - intermolecular applications of ribozymes Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192333 N1 - This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Journal of the American Chemical Society, copyright © American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/jacs.9b10531. ER - TY - JOUR A1 - Maghami, Mohammad Ghaem A1 - Dey, Surjendu A1 - Lenz, Ann-Kathrin A1 - Höbartner, Claudia T1 - Repurpsing Antiviral Drugs for Orthogonal RNA-Catalyzed Labeling JF - Angewandte Chemie, International Edition N2 - In vitro selected ribozymes are promising tools for site-specific labeling of RNA. Previously known nucleic acid catalysts attached fluorescently labeled adenosine or guanosine derivatives through 2’,5’-branched phosphodiester bonds to the RNA of interest. Herein, we report new ribozymes that use orthogonal substrates, derived from the antiviral drug tenofovir, and attach bioorthogonal functional groups, as well as affinity handles and fluorescent reporter units through a hydrolytically more stable phosphonate ester linkage. The tenofovir transferase ribozymes were identified by in vitro selection and are orthogonal to nucleotide transferase ribozymes. As genetically encodable functional RNAs, these ribozymes may be developed for potential cellular applications. The orthogonal ribozymes addressed desired target sites in large RNAs in vitro, as shown by fluorescent labeling of E. coli 16S and 23S RNAs in total cellular RNA. KW - Antiviral nucleoside analogues KW - in vitro selection KW - ribozymes KW - site-specific RNA labeling KW - tenofovir Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-205552 VL - 59 ER - TY - JOUR A1 - Lübtow, Michael M. A1 - Marciniak, Henning A1 - Schmiedel, Alexander A1 - Roos, Markus A1 - Lambert, Christoph A1 - Luxenhofer, Robert T1 - Ultra-high to ultra-low drug loaded micelles: Probing host-guest interactions by fluorescence spectroscopy JF - Chemistry - A European Journal N2 - Polymer micelles are an attractive means to solubilize water insoluble compounds such as drugs. Drug loading, formulations stability and control over drug release are crucial factors for drug‐loaded polymer micelles. The interactions between the polymeric host and the guest molecules are considered critical to control these factors but typically barely understood. Here, we compare two isomeric polymer micelles, one of which enables ultra‐high curcumin loading exceeding 50 wt.%, while the other allows a drug loading of only 25 wt.%. In the low capacity micelles, steady‐state fluorescence revealed a very unusual feature of curcumin fluorescence, a high energy emission at 510 nm. Time‐resolved fluorescence upconversion showed that the fluorescence life time of the corresponding species is too short in the high‐capacity micelles, preventing an observable emission in steady‐state. Therefore, contrary to common perception, stronger interactions between host and guest can be detrimental to the drug loading in polymer micelles. KW - curcumin KW - drug delivery KW - fluorenscence KW - poly(2-oxazine) KW - pol(2-oxazoline) KW - Polymer-drug interaction KW - upconversion Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-206128 VL - 25 IS - 54 ER - TY - THES A1 - Lohr, Andreas T1 - Self-Assembly of Merocyanines : Thermodynamic and Kinetic Insights into the Formation of Well-Defined Dye Aggregates T1 - Selbstorganisation von Merocyaninen : Thermodynamische und Kinetische Einblicke in die Bildung definierter Farbstoffaggregate N2 - The present thesis demonstrates the potential of dipolar aggregation of merocyanine dyes as novel directional and specific supramolecular binding motif for the creation of more elaborate supramolecular architectures beyond simple dimers. Furthermore, the self-assembly studies into bis(merocyanine) nanorods gave new insights into the kinetics of morphogenesis in supramolecular aggregates. N2 - In der vorliegenden Arbeit konnte das Potential der dipolaren Aggregation von Merocyaninfarbstoffen als neuartiges, gerichtetes und spezifisches Bindungsmotif zum Aufbau wesentlich komplexerer supramolekularer Architekturen als einfachen Dimeren aufgezeigt werden. Desweiteren lieferten Studien zur Selbstorganisation von Bis(merocyanin)-Nanostäbchen neue Erkenntnisse zur Morphogenese supramolekularer Aggregate. KW - Supramolekulare Chemie KW - Selbstorganisation KW - Farbstoff KW - Kinetik KW - Merocyanin KW - H-Aggregate KW - Nanostrukturen KW - Chiralität KW - Merocyanine KW - H-Aggregate KW - Nanostructure KW - Chirality Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28964 ER - TY - JOUR A1 - Liu, Bin A1 - Vonhausen, Yvonne A1 - Schulz, Alexander A1 - Höbartner, Claudia A1 - Würthner, Frank T1 - Peptide Backbone Directed Self-Assembly of Merocyanine Oligomers into Duplex Structures JF - Angewandte Chemie International Edition N2 - The pseudopeptide backbone provided by N-(2-aminoethyl)-glycine oligomers with attached nucleobases has been widely utilized in peptide nucleic acids (PNAs) as DNA mimics. Here we demonstrate the suitability of this backbone for the formation of structurally defined dye stacks. Toward this goal a series of peptide merocyanine (PMC) dye oligomers connected to a N-(2-aminoethyl)-glycine backbone were prepared through peptide synthesis. Our concentration-, temperature- and solvent-dependent UV/Vis absorption studies show that under the control of dipole–dipole interactions, smaller-sized oligomers consisting of one, two or three dyes self-assemble into defined duplex structures containing two up to six chromophores. In contrast, upon further extension of the oligomer, the chosen peptide backbone cannot direct the formation of a defined duplex architecture anymore due to intramolecular aggregation between the dyes. For all aggregate species a moderate aggregation-induced emission enhancement is observed. KW - dipole-dipole interaction KW - peptide backbone KW - merocyanine KW - dye assembly KW - duplex structure Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-318797 VL - 61 IS - 21 ER - TY - THES A1 - Liess, Andreas T1 - Structure-Property Relationships of Merocyanine Dyes in the Solid State: Charge Transport and Exciton Coupling T1 - Struktur-Eigenschafts-Beziehungen von Merocyaninfarbstoffen im Festkörper: Ladungstransport und Exzitonenkopplung N2 - The present thesis demonstrates the importance of the solid state packing of dipolar merocyanine dyes with regard to charge transport and exciton coupling. Due to the charge transport theory for disordered materials, it is expected that high ground state dipole moments in amorphous thin films lead to low mobility values due to a broadening of the density of states. However, due to their inherent dipolarity, merocyanine dyes usually align in antiparallel dimers in an ordered fashion. The examination of twenty different molecules with ground state dipole moments up to 15.0 D shows that by a high dipolarity and well-defined sterics, the molecules pack in a highly regular two-dimensional brickwork-type structure, which is beneficial for hole transport. Utilization of these molecules for organic thin-film transistors (OTFTs) leads to hole mobility values up to 0.21 cm²/Vs. By fabrication of single crystal field-effect transistors (SCFETs) for the derivative showing the highest mobility values in OTFTs, even hole mobilities up to 2.34 cm²/Vs are achieved. Hence, merocyanine based transistors show hole mobility values comparable to those of conventional p-type organic semiconductors and therefore high ground state dipole moments are not necessarily disadvantageous regarding high mobility applications. By examination of a different series of ten merocyanine dyes with the same chromophore backbone but different donor substituents, it is demonstrated that the size of the donor has a significant influence on the optical properties of thin films. For small and rigid donor substituents, a hypsochromic shift of the absorption compared to the monomer absorption in solution is observed due to the card stack like packing of the molecules in the solid state. By utilization of sterical demanding or flexible donor substituents, a zig-zag type packing is observed, leading to a bathochromical shift of the absorption. These packing motifs and spectral shifts with an offset of 0.93 eV of the H- and J-bands comply with the archetype examples of H- and J-aggregates from Kasha’s exciton theory. N2 - Im Rahmen der vorliegenden Doktorarbeit wird die Wichtigkeit der Packung von dipolaren Merocyaninfarbstoffen im Festkörper im Hinblick auf Ladungstransport sowie Exzitonenkopplung demonstriert. Aufgrund der Ladungstransporttheorie für ungeordnete Materialien wird erwartet, dass hohe Grundzustandsdipolmomente die Mobilität aufgrund einer Verbreiterung der Zustandsdichte verringern. Allerdings neigen Merocyanine durch ihre Dipolarität normalerweise zur Ausbildung von geordneten antiparallelen Dimeren. Durch Untersuchung von zwanzig verschiedenen Molekülen mit Grundzustandsdipolmomenten bis zu 15.0 D wird gezeigt, dass durch eine hohe Dipolarität sowie eine gut definierte Sterik der Moleküle eine hoch geordnete zweidimensionale Backstein-artige Packung erzielt wird, welche günstig für den Lochtransport ist. Hierdurch werden in organischen Dünnschichttransistoren (OTFTs) Lochmobilitäten bis zu 0.21 cm²/Vs erzielt. Durch Fertigung von Einkristallfeldeffekttransistoren (SCFETs) für das Derivat mit den höchsten Lochmobilitäten in OTFTs werden außerdem Lochmobilitäten bis zu 2.34 cm²/Vs demonstriert. Damit zeigen Merocyanin-basierte Transistoren ähnliche Lochmobilitätswerte wie konventionelle organische p-Halbleiter. Folglich sind hohe Grundzustandsdipolmomente für Anwendungen, welche hohe Mobilitäten erfordern, nicht zwangsläufig von Nachteil. Durch Untersuchung einer weiteren Serie von zehn Merocyaninfarbstoffen mit gleichem Chromophorgrundgerüst und verschiedenen Donorsubstituenten wird außerdem gezeigt, dass die Größe des Donors einen signifikanten Einfluss auf die optischen Eigenschaften von Dünnschichten hat. Für kleine und rigide Donorsubstituenten wird eine hypsochrome Verschiebung der Absorption im Vergleich zum Monomer in Lösung beobachtet, welche durch eine Kartenstapel-artige Packung der Farbstoffe im Festkörper bedingt wird. Bei der Verwendung von sterisch anspruchsvollen oder flexiblen Donorsubstituenten wird eine Zick-Zack-artige Packung beobachtet, welche eine bathochrome Verschiebung der Absorption bewirkt. Diese Packungsmotive und spektralen Verschiebungen mit einem Versatz von 0.93 eV der H- und J-Banden stehen im Einklang zu den typischen Beispielen von H- und J-Aggregaten aus Kashas Exzitonentheorie. KW - Exziton KW - Organischer Feldeffekttransistor KW - Organische Halbleiter KW - Merocyanine KW - Merocyanine dyes KW - Organic field-effect transistor KW - Organic semiconductors KW - Exciton coupling KW - Exzitonenkopplung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-152900 ER - TY - THES A1 - Liebscher [geb. Blöhbaum], Julia T1 - Side chain functional poly(2-oxazoline)s for biomedical applications T1 - Seitenkettenfunktionalisierte Poly(2-oxazoline) für biomedizinische Anwendungen N2 - The aim of the thesis was to develop water soluble poly(2-oxazoline) (POx) copolymers with new side group functionalities, which can be used for the formation of hydrogels in biomedical applications and for the development of peptide-polymer conjugates. First, random copolymers of the monomer MeOx or EtOx with ButEnOx and EtOx with DecEnOx were synthesized and characterized. The vinyl functionality brought into the copolymer by the monomers ButEnOx and DecEnOx would later serve for post-polymerization functionalization. The synthesized copolymers were further functionalized with thiols via post-polymerization functionalization using a newly developed synthesis protocol or with a protected catechol molecule for hydrogel formation. For the formation of peptide-polymer conjugates, a cyclic thioester, namely thiolactone acrylamide and an azlactone precursor, whose synthesis was newly developed, were attached to the side chain of P(EtOx-co-ButEnOx) copolymers. The application of the functionalized thiol copolymers as hydrogels using thiol-ene chemistry for cross-linking was demonstrated. The swelling behavior and mechanical properties were characterized. The hydrophilicity of the network as well as the cross-linking density strongly influenced the swelling behavior and the mechanical strength of the hydrogels. All hydrogels showed good cell viability results. The hydrogel networks based on MeOx and EtOx were loaded with two dyes, fluorescein and methylene blue. It was observed that the uptake of the more hydrophilic dye fluorescein depended more on the ability of the hydrogel to swell. In contrast, the uptake of the more hydrophobic dye methylene blue was less dependent on the swelling degree, but much more on the hydrophilicity of the network. For the potential application as cartilage glue, (biohybrid) hydrogels were synthesized based on the catechol-functionalized copolymers, with and without additional fibrinogen, using sodium periodate as the oxidizing agent. The system allowed for degradation due to the incorporated ester linkages at the cross-linking points. The swelling behavior as well as the mechanical properties were characterized. As expected, hydrogels with higher degrees of cross-linking showed less swelling and higher elastic modulus. The addition of fibrinogen however increased the elasticity of the network, which can be favorable for the intended application as a cartilage glue. Biological evaluation clearly demonstrated the advantage of degradable ester links in the hydrogel network, where chondrocytes were able to bridge the artificial gap in contrast to hydrogels without any ester motifs. Lastly, different ways to form peptide-polymer conjugates were presented. Peptides were attached with the thiol of the terminal cysteine group to the vinyl side chain of P(EtOx-co-ButEnOx) copolymers by radical thiol-ene chemistry. Another approach was to use a cyclic thioester, thiolactone, or an azlactone functionality to bind a model peptide via native chemical ligation. The two latter named strategies to bind peptides to POx side chains are especially interesting as one and in the case of thiolactone two free thiols are still present at the binding site after the reaction, which can, for example, be used for further thiol-ene cross-linking to form POx hydrogels. In summary, side functional poly(oxazoline) copolymers show great potential for numerous biomedical applications. The various side chain functionalities can be introduced by an appropriate monomer or by post-polymerization functionalization, as demonstrated. By their multi-functionality, hydrogel characteristics, such as cross-linking degree and mechanical strength, can be fine-tuned and adjusted depending on the application in the human body. In addition, the presented chemoselective and orthogonal reaction strategies can be used in the future to synthesize polymer conjugates, which can, for example, be used in drug delivery or in tissue regeneration. N2 - Das Ziel der Arbeit war es, wasserlösliche Poly(2-oxazolin) (POx) Copolymere mit neuen Seitenkettenfunktionalitäten zu entwickeln, welche zur Synthese von Hydrogelen für biomedizinische Anwendungen und zur Entwicklung von Peptid-Polymer Konjugaten genutzt werden können. Zunächst wurden Copolymere aus den Monomeren MeOx oder EtOx mit ButEnOx und EtOx mit DecEnOx synthetisiert und anschließend charakterisiert. Die Monomere wurden statistisch miteinander copolymerisiert, indem sie zusammen zum Start der Reaktion in das Reaktionsgefäß gegeben wurden. Die Vinyl Funktionalität, die durch die Monomere ButEnOx und DecEnOx eingebracht wurde, kann später zur nachträglichen Funktionalisierung am Polymer verwendet werden. Die synthetisierten Copolymere wurden weiterhin mit Thiolen oder mit funktionellen Catecholgruppen ausgestattet, um Hydrogele herzustellen. Um Peptid-Polymer Konjugate zu bilden, wurden zyklische Thioester, genauer Thiolacton acrylamid und ein Azlacton Präkursor, dessen Synthese neu entwickelt wurde, an die Seitenkette von P(EtOx-co-ButEnOx) Copolymere angebunden. Im Folgenden wurde die Anwendung der thiol funktionalisierten Copolymere als Hydrogele, welche mittels radikalischer Thiol-ene Chemie vernetzt wurden, präsentiert. Das Quellverhalten und die mechanischen Eigenschaften wurden analysiert. Sowohl die Hydrophilie des Netzwerkes als auch die Vernetzungsdichte beeinflusste das Quellverhalten und die mechanische Festigkeit stark. Alle Hydrogele zeigten gute Zellverträglichkeit. Die Hydrogele basierend auf MeOx und EtOx wurden außerdem mit den Farbstoffen Fluorescein und Methylenblau beladen. Es wurde beobachtet, dass von den beiden Farbstoffen die Aufnahme des hydrophileren Farbstoffs Fluorescein stärker vom Quellungsgrad des Hydrogels abhing. Hingegen war die Aufnahme des hydrophoberen Farbstoffs Methylenblau weniger davon abhängig wie sehr das Hydrogel quellen konnte, sondern stärker von der Hydrophilie des Hydrogel-Netzwerkes. Um die potenzielle Anwendung als Knorpelkleber zu testen, wurden (biohybrid) Hydrogele basierend auf Catechol-funktionalisiertem Copolymeren mit und ohne zusätzliches Fibrinogen und dem Oxidationsmittel Natriumperiodat hergestellt. Das System war durch die eingebauten Ester Vernetzungspunkte abbaubar. Das Quellverhalten und die mechanischen Eigenschaften wurden charakterisiert. Wie zu erwarten, zeigten Hydrogele mit stärkerer Vernetzung eine geringe Quellung und einen höheren elastischen Modulus. Die Zugabe von Fibrinogen jedoch erhöhte die Elastizität des Netzwerkes, welches förderlich für die avisierte Anwendung als Knorpelkleber sein kann. Die biologische Auswertung zeigte, dass die Ester-haltigen, abbaubaren Vernetzungspunkte von großem Vorteil sind. Die Chondrozyten konnten ohne Probleme den Defektspalt überbrücken, was nicht möglich war, sobald keine Ester Funktionalitäten im Hydrogel eingebunden waren. Zuletzt wurden verschiedene Möglichkeiten Peptid-Polymer Konjugate zu synthetisieren präsentiert. Zum einen wurden Peptide mit der Thiolgruppe des endständigen Cysteins an die Vinyl Seitenkette der P(EtOx-co-ButEnOx) Copolymere mittels radikalischer Thiol-en Chemie angebunden. Des Weiteren wurde ein zyklischer Thioester, das Thiolacton, und eine Azlacton Funktionalität verwendet, um ein Modell Peptid mittels nativer chemischer Ligation zu binden. Die zwei zuletzt genannten Strategien, um Peptide an Polymere zu binden, sind besonders interessant, da hier ein beziehungsweise im Fall der Thiolacton Funktionalität zwei freie Thiole an der Bindungsstelle nach der Reaktion entstehen. Diese könnten genutzt werden, um zum Beispiel über Thiol-en Chemie Peptid-haltige Hydrogele herzustellen. Zusammenfassend zeigen seitenkettenfunktionale Poly(oxazolin) Copolymere ein großes Potenzial für biomedizinische Anwendungen. Die vielen verschiedenen Seitenkettenfunktionalitäten können durch das passende Monomer oder durch Post-Polymerisationsfunktionalisierung eingebracht werden, wie in dieser Arbeit gezeigt. Durch ihre Multifunktionalität können Hydrogel Charakteristika, wie der Vernetzungsgrad und die mechanische Festigkeit, fein eingestellt und angepasst werden, je nach Anwendungsbereich im menschlichen Körper. Die entwickelten chemoselektiven und orthogonalen Reaktionswege können in der Zukunft genutzt werden, um Polymer Konjugate zu synthetisieren, welche zum Beispiel für das Drug Delivery oder im Bereich der Geweberegneration zum Einsatz kommen. KW - Polymere KW - Ringöffnungspolymerisation KW - Hydrogel KW - hydrogel KW - poly(2-oxazoline)s KW - ring-opening polymerization KW - polymer-peptide-conjugate KW - thiol-ene KW - Dihydrooxazole Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203960 ER -