TY - JOUR A1 - Grande, Vincenzo A1 - Soberats, Bartolome A1 - Herbst, Stefanie A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Hydrogen-bonded perylene bisimide J-aggregate aqua material N2 - A new twelvefold methoxy-triethyleneglycol-jacketed tetraphenoxy-perylene bisimide (MEG-PBI) amphiphile was synthesized that self-assembles into two types of supramolecular aggregates in water: red-coloured aggregates of low order and with weak exciton coupling among the PBIs and blue-coloured strongly coupled J-aggregates consisting of a highly ordered hydrogen-bonded triple helix of PBIs. At room temperature this PBI is miscible with water at any proportions which enables the development of robust dye aggregates in solution, in hydrogel states and in lyotropic liquid crystalline states. In the presence of 60–95 wt% water, self-standing coloured hydrogels exhibit colour changes from red to blue accompanied by a fluorescence light-up in the far-red region upon heating in the range of 30–50 °C. This phenomenon is triggered by an entropically driven temperature-induced hydrogen-bond-directed slipped stacking arrangement of the MEG-PBI chromophores within structurally well-defined J-aggregates. This versatile aqua material is the first example of a stable PBI J-aggregate in water. We anticipate that this study will open a new avenue for the development of biocompatible functional materials based on self-assembled dyes and inspire the construction of other hydrogen-bonded supramolecular materials in the highly competitive solvent water. KW - self-assembly KW - dyes KW - aqua material Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204715 UR - https://doi.org/10.1039/C8SC02409J SN - 2041-6539 VL - 9 ER - TY - JOUR A1 - Renner, Rebecca A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Self-Assembly of bowl-shaped naphthalimide-annulated corannulene JF - ChemistryOpen N2 - The self-assembly of a bowl-shaped naphthalimide-annulated corannulene of high solubility has been studied in a variety of solvents by NMR and UV/Vis spectroscopy. Evaluation by the anti-cooperative K\(_2\)-K model revealed the formation of supramolecular dimers of outstanding thermodynamic stability. Further structural proof for the almost exclusive formation of dimers over extended aggregates is demonstrated by atomic force microscopy (AFM) and diffusion ordered spectroscopy (DOSY) measurements as well as by theoretical calculations. Thus, herein we present the first report of a supramolecular dimer of an annulated corannulene derivative in solution and discuss its extraordinarily high thermodynamic stability with association constants up to > 10\(^6\)M\(^-\) \(^1\) in methylcyclohexane, which is comparable to the association constants given for planar phthalocyanine and perylene bisimide dyes. KW - corannulene KW - π-π-interactions KW - aelf-assembly KW - aggregation KW - supramolecular chemistry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204396 VL - 9 IS - 1 ER - TY - JOUR A1 - Mueller, Stefan A1 - Lüttig, Julian A1 - Malý, Pavel A1 - Ji, Lei A1 - Han, Jie A1 - Moos, Michael A1 - Marder, Todd B. A1 - Bunz, Uwe H. F. A1 - Dreuw, Andreas A1 - Lambert, Christoph A1 - Brixner, Tobias T1 - Rapid multiple-quantum three-dimensional fluorescence spectroscopy disentangles quantum pathways JF - Nature Communications N2 - Coherent two-dimensional spectroscopy is a powerful tool for probing ultrafast quantum dynamics in complex systems. Several variants offer different types of information but typically require distinct beam geometries. Here we introduce population-based three-dimensional (3D) electronic spectroscopy and demonstrate the extraction of all fourth- and multiple sixth-order nonlinear signal contributions by employing 125-fold (1⨯5⨯5⨯5) phase cycling of a four-pulse sequence. Utilizing fluorescence detection and shot-to-shot pulse shaping in single-beam geometry, we obtain various 3D spectra of the dianion of TIPS-tetraazapentacene, a fluorophore with limited stability at ambient conditions. From this, we recover previously unknown characteristics of its electronic two-photon state. Rephasing and nonrephasing sixth-order contributions are measured without additional phasing that hampered previous attempts using noncollinear geometries. We systematically resolve all nonlinear signals from the same dataset that can be acquired in 8 min. The approach is generalizable to other incoherent observables such as external photoelectrons, photocurrents, or photoions. KW - Atomic and molecular interactions with photons KW - Optical spectroscopy Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202529 VL - 10 ER - TY - THES A1 - Liebscher [geb. Blöhbaum], Julia T1 - Side chain functional poly(2-oxazoline)s for biomedical applications T1 - Seitenkettenfunktionalisierte Poly(2-oxazoline) für biomedizinische Anwendungen N2 - The aim of the thesis was to develop water soluble poly(2-oxazoline) (POx) copolymers with new side group functionalities, which can be used for the formation of hydrogels in biomedical applications and for the development of peptide-polymer conjugates. First, random copolymers of the monomer MeOx or EtOx with ButEnOx and EtOx with DecEnOx were synthesized and characterized. The vinyl functionality brought into the copolymer by the monomers ButEnOx and DecEnOx would later serve for post-polymerization functionalization. The synthesized copolymers were further functionalized with thiols via post-polymerization functionalization using a newly developed synthesis protocol or with a protected catechol molecule for hydrogel formation. For the formation of peptide-polymer conjugates, a cyclic thioester, namely thiolactone acrylamide and an azlactone precursor, whose synthesis was newly developed, were attached to the side chain of P(EtOx-co-ButEnOx) copolymers. The application of the functionalized thiol copolymers as hydrogels using thiol-ene chemistry for cross-linking was demonstrated. The swelling behavior and mechanical properties were characterized. The hydrophilicity of the network as well as the cross-linking density strongly influenced the swelling behavior and the mechanical strength of the hydrogels. All hydrogels showed good cell viability results. The hydrogel networks based on MeOx and EtOx were loaded with two dyes, fluorescein and methylene blue. It was observed that the uptake of the more hydrophilic dye fluorescein depended more on the ability of the hydrogel to swell. In contrast, the uptake of the more hydrophobic dye methylene blue was less dependent on the swelling degree, but much more on the hydrophilicity of the network. For the potential application as cartilage glue, (biohybrid) hydrogels were synthesized based on the catechol-functionalized copolymers, with and without additional fibrinogen, using sodium periodate as the oxidizing agent. The system allowed for degradation due to the incorporated ester linkages at the cross-linking points. The swelling behavior as well as the mechanical properties were characterized. As expected, hydrogels with higher degrees of cross-linking showed less swelling and higher elastic modulus. The addition of fibrinogen however increased the elasticity of the network, which can be favorable for the intended application as a cartilage glue. Biological evaluation clearly demonstrated the advantage of degradable ester links in the hydrogel network, where chondrocytes were able to bridge the artificial gap in contrast to hydrogels without any ester motifs. Lastly, different ways to form peptide-polymer conjugates were presented. Peptides were attached with the thiol of the terminal cysteine group to the vinyl side chain of P(EtOx-co-ButEnOx) copolymers by radical thiol-ene chemistry. Another approach was to use a cyclic thioester, thiolactone, or an azlactone functionality to bind a model peptide via native chemical ligation. The two latter named strategies to bind peptides to POx side chains are especially interesting as one and in the case of thiolactone two free thiols are still present at the binding site after the reaction, which can, for example, be used for further thiol-ene cross-linking to form POx hydrogels. In summary, side functional poly(oxazoline) copolymers show great potential for numerous biomedical applications. The various side chain functionalities can be introduced by an appropriate monomer or by post-polymerization functionalization, as demonstrated. By their multi-functionality, hydrogel characteristics, such as cross-linking degree and mechanical strength, can be fine-tuned and adjusted depending on the application in the human body. In addition, the presented chemoselective and orthogonal reaction strategies can be used in the future to synthesize polymer conjugates, which can, for example, be used in drug delivery or in tissue regeneration. N2 - Das Ziel der Arbeit war es, wasserlösliche Poly(2-oxazolin) (POx) Copolymere mit neuen Seitenkettenfunktionalitäten zu entwickeln, welche zur Synthese von Hydrogelen für biomedizinische Anwendungen und zur Entwicklung von Peptid-Polymer Konjugaten genutzt werden können. Zunächst wurden Copolymere aus den Monomeren MeOx oder EtOx mit ButEnOx und EtOx mit DecEnOx synthetisiert und anschließend charakterisiert. Die Monomere wurden statistisch miteinander copolymerisiert, indem sie zusammen zum Start der Reaktion in das Reaktionsgefäß gegeben wurden. Die Vinyl Funktionalität, die durch die Monomere ButEnOx und DecEnOx eingebracht wurde, kann später zur nachträglichen Funktionalisierung am Polymer verwendet werden. Die synthetisierten Copolymere wurden weiterhin mit Thiolen oder mit funktionellen Catecholgruppen ausgestattet, um Hydrogele herzustellen. Um Peptid-Polymer Konjugate zu bilden, wurden zyklische Thioester, genauer Thiolacton acrylamid und ein Azlacton Präkursor, dessen Synthese neu entwickelt wurde, an die Seitenkette von P(EtOx-co-ButEnOx) Copolymere angebunden. Im Folgenden wurde die Anwendung der thiol funktionalisierten Copolymere als Hydrogele, welche mittels radikalischer Thiol-ene Chemie vernetzt wurden, präsentiert. Das Quellverhalten und die mechanischen Eigenschaften wurden analysiert. Sowohl die Hydrophilie des Netzwerkes als auch die Vernetzungsdichte beeinflusste das Quellverhalten und die mechanische Festigkeit stark. Alle Hydrogele zeigten gute Zellverträglichkeit. Die Hydrogele basierend auf MeOx und EtOx wurden außerdem mit den Farbstoffen Fluorescein und Methylenblau beladen. Es wurde beobachtet, dass von den beiden Farbstoffen die Aufnahme des hydrophileren Farbstoffs Fluorescein stärker vom Quellungsgrad des Hydrogels abhing. Hingegen war die Aufnahme des hydrophoberen Farbstoffs Methylenblau weniger davon abhängig wie sehr das Hydrogel quellen konnte, sondern stärker von der Hydrophilie des Hydrogel-Netzwerkes. Um die potenzielle Anwendung als Knorpelkleber zu testen, wurden (biohybrid) Hydrogele basierend auf Catechol-funktionalisiertem Copolymeren mit und ohne zusätzliches Fibrinogen und dem Oxidationsmittel Natriumperiodat hergestellt. Das System war durch die eingebauten Ester Vernetzungspunkte abbaubar. Das Quellverhalten und die mechanischen Eigenschaften wurden charakterisiert. Wie zu erwarten, zeigten Hydrogele mit stärkerer Vernetzung eine geringe Quellung und einen höheren elastischen Modulus. Die Zugabe von Fibrinogen jedoch erhöhte die Elastizität des Netzwerkes, welches förderlich für die avisierte Anwendung als Knorpelkleber sein kann. Die biologische Auswertung zeigte, dass die Ester-haltigen, abbaubaren Vernetzungspunkte von großem Vorteil sind. Die Chondrozyten konnten ohne Probleme den Defektspalt überbrücken, was nicht möglich war, sobald keine Ester Funktionalitäten im Hydrogel eingebunden waren. Zuletzt wurden verschiedene Möglichkeiten Peptid-Polymer Konjugate zu synthetisieren präsentiert. Zum einen wurden Peptide mit der Thiolgruppe des endständigen Cysteins an die Vinyl Seitenkette der P(EtOx-co-ButEnOx) Copolymere mittels radikalischer Thiol-en Chemie angebunden. Des Weiteren wurde ein zyklischer Thioester, das Thiolacton, und eine Azlacton Funktionalität verwendet, um ein Modell Peptid mittels nativer chemischer Ligation zu binden. Die zwei zuletzt genannten Strategien, um Peptide an Polymere zu binden, sind besonders interessant, da hier ein beziehungsweise im Fall der Thiolacton Funktionalität zwei freie Thiole an der Bindungsstelle nach der Reaktion entstehen. Diese könnten genutzt werden, um zum Beispiel über Thiol-en Chemie Peptid-haltige Hydrogele herzustellen. Zusammenfassend zeigen seitenkettenfunktionale Poly(oxazolin) Copolymere ein großes Potenzial für biomedizinische Anwendungen. Die vielen verschiedenen Seitenkettenfunktionalitäten können durch das passende Monomer oder durch Post-Polymerisationsfunktionalisierung eingebracht werden, wie in dieser Arbeit gezeigt. Durch ihre Multifunktionalität können Hydrogel Charakteristika, wie der Vernetzungsgrad und die mechanische Festigkeit, fein eingestellt und angepasst werden, je nach Anwendungsbereich im menschlichen Körper. Die entwickelten chemoselektiven und orthogonalen Reaktionswege können in der Zukunft genutzt werden, um Polymer Konjugate zu synthetisieren, welche zum Beispiel für das Drug Delivery oder im Bereich der Geweberegneration zum Einsatz kommen. KW - Polymere KW - Ringöffnungspolymerisation KW - Hydrogel KW - hydrogel KW - poly(2-oxazoline)s KW - ring-opening polymerization KW - polymer-peptide-conjugate KW - thiol-ene KW - Dihydrooxazole Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203960 ER - TY - JOUR A1 - Fayez, Shaimaa A1 - Feineis, Doris A1 - Aké Assi, Laurent A1 - Seo, Ean-Jeong A1 - Efferth, Thomas A1 - Bringmann, Gerhard T1 - Ancistrobreveines A–D and related dehydrogenated naphthylisoquinoline alkaloids with antiproliferative activities against leukemia cells, from the West African liana Ancistrocladus abbreviatus JF - RSC Advances N2 - A unique series of six biaryl natural products displaying four different coupling types (5,10 , 7,10 , 7,80 , and 5,80) were isolated from the roots of the West African liana Ancistrocladus abbreviatus (Ancistrocladaceae). Although at first sight structurally diverse, these secondary metabolites all have in common that they belong to the rare group of naphthylisoquinoline alkaloids with a fully dehydrogenated isoquinoline portion. Among the African Ancistrocladus species, A. abbreviatus is so far only the second one that was found to produce compounds with such a molecular entity. Here, we report on four new representatives, named ancistrobreveines A–D (12–14, and 6). They were identified along with the two known alkaloids 6-O-methylhamateine (4) and entdioncophylleine A (10). The two latter naphthylisoquinolines had so far only been detected in Ancistrocladus species from Southeast Asia. All of these fully dehydrogenated alkaloids have in common being optically active despite the absence of stereogenic centers, due to the presence of the rotationally hindered biaryl axis as the only element of chirality. Except for ent-dioncophylleine A (10), which lacks an oxygen function at C-6, the ancistrobreveines A–D (12–14, and 6) and 6-O-methylhamateine (4) are 6-oxygenated alkaloids, and are, thus, typical ‘Ancistrocladaceae-type’ compounds. Ancistrobreveine C (14), is the first – and so far only – example of a 7,80-linked fully dehydrogenated naphthylisoquinoline discovered in nature that is configurationally stable at the biaryl axis. The stereostructures of the new alkaloids were established by spectroscopic (in particular HRESIMS, 1D and 2D NMR) and chiroptical (electronic circular dichroism) methods. Ancistrobreveine C (14) and 6-O-methylhamateine (4) exhibited strong antiproliferative activities against drug-sensitive acute lymphoblastic CCRF-CEM leukemia cells and their multidrugresistant subline, CEM/ADR5000. KW - chemistry Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-201686 VL - 9 IS - 28 ER - TY - JOUR A1 - Mufusama, Jean-Pierre A1 - Feineis, Doris A1 - Mudogo, Virima A1 - Kaiser, Marcel A1 - Brun, Reto A1 - Bringmann, Gerhard T1 - Antiprotozoal dimeric naphthylisoquinolines, mbandakamines B\(_3\) and B\(_4\), and related 5,8′-coupled monomeric alkaloids, ikelacongolines A–D, from a Congolese Ancistrocladus liana JF - RSC Advances N2 - From the leaves of a botanically and phytochemically as yet unexplored Ancistrocladus liana discovered in the rainforests of the Central region of the Democratic Republic of the Congo in the vicinity of the town of Ikela, six new naphthylisoquinoline alkaloids were isolated, viz., two constitutionally unsymmetric dimers, the mbandakamines B\(_3\) (3) and B\(_4\) (4), and four related 5,8′-linked monomeric alkaloids, named ikelacongolines A–D (5a, 5b, 6, and 7). The dimers 3 and 4 are structurally unusual quateraryls comprising two 5,8′-coupled monomers linked via a sterically strongly constrained 6′,1′′-connection between their naphthalene units. These compounds contain seven elements of chirality, four stereogenic centers and three consecutive chiral axes. They were identified along with two known related compounds, the mbandakamines A (1) and B\(_2\) (2), which had so far only been detected in two Ancistrocladus species indigenous to the Northwestern Congo Basin. In addition, five known monomeric alkaloids, previously found in related Central African Ancistrocladus species, were isolated from the here investigated Congolese liana, three of them belonging to the subclass of 5,8′-coupled naphthylisoquinoline alkaloids, whereas two compounds exhibited a less frequently occurring 7,8′-biaryl linkage. The stereostructures of the new alkaloids were established by spectroscopic (in particular HRESIMS, 1D and 2D NMR), chemical (oxidative degradation), and chiroptical (electronic circular dichroism) methods. The mbandakamines B\(_3\) (3) and B\(_4\) (4) displayed pronounced activities in vitro against the malaria parasite Plasmodium falciparum and the pathogen of African sleeping sickness, Trypanosoma brucei rhodesiense. KW - chemistry Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-201141 VL - 9 IS - 21 ER - TY - JOUR A1 - Tshitenge Tshitenge, Dieudonné A1 - Bruhn, Torsten A1 - Feineis, Doris A1 - Mudogo, Virima A1 - Kaiser, Marcel A1 - Brun, Reto A1 - Bringmann, Gerhard T1 - An unusually broad series of seven cyclombandakamines, bridged dimeric naphthylisoquinoline alkaloids from the Congolese liana Ancistrocladus ealaensis JF - Scientific Reports N2 - A series of seven unusual dimeric naphthylisoquinoline alkaloids was isolated from the leaves of the tropical liana Ancistrocladus ealaensis J. Léonard, named cyclombandakamine A (1), 1-epi-cyclombandakamine A (2), and cyclombandakamines A3–7 (3–7). These alkaloids have a chemically thrilling structural array consisting of a twisted dihydrofuran-cyclohexenone-isochromene system. The 1′″-epimer of 4, cyclombandakamine A1 (8), had previously been discovered in an unidentified Ancistrocladus species related to A. ealaensis. Both lianas produce the potential parent precursor, mbandakamine A (9), but only A. ealaensis synthesizes the corresponding cyclized form, along with a broad series of slightly modified analogs. The challenging isolation required, besides multi-dimensional chromatography, the use of a pentafluorophenyl stationary phase. Featuring up to six stereocenters and two types of chiral axes, their structures were elucidated by means of 1D and 2D NMR, HRESIMS, in combination with oxidative chemical degradation experiments as well as chiroptical (electronic circular dichroism spectroscopy) and quantum chemical calculations. Compared to the ‘open-chain’ parent compound 9, these dimers displayed rather moderate antiplasmodial activities. KW - Screening KW - Solution-state NMR KW - Stereochemistry KW - Structure elucidation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200759 VL - 9 ER - TY - THES A1 - Kraus, Michael T1 - The Conversion of Bifidobacterium adolescentis Sucrose Phosphorylase into a Polyphenol Transglucosidase via Structure-based Enzyme Engineering T1 - Umwandlung einer Sacharose Phosphorylase in eine Polyphenol Transglukosidase durch strukturbasiertes Enzyme Engineering N2 - The initial goal was the conversion of Bifidobacterium adolescentis Sucrose Phosphorylase (BaSP) into a polyphenol glucosidase by structure based enzyme engineering. BaSP was chosen because of its ability to utilize sucrose, an economically viable and sustainable donor substrate, and transfer the glucosyl moiety to various acceptor substrates. The introduction of aromatic residues into the active site was considered a viable way to render it more suitable for aromatic acceptor compounds by reducing its polarity and potentially introducing π-π-interactions with the polyphenols. An investigation of the active site revealed Gln345 as a suitable mutagenesis target. As a proof of concept BaSP Q345F was employed in the glycosylation of (+)-catechin, (-)-epicatechin and resveratrol. The variant was selective for the aromatic acceptor substrates and the glucose disaccharide side reaction was only observed after almost quantitative conversion of the aromatic substrates. A crystal structure of BaSP Q345F in complex with glucose was obtained and it displayed an unexpected shift of an entire domain by 3.3 Å. A crystal structure of BaSP D192N-Q345F, an inactive variant in complex with resveratrol-3-α-D-glucosid, the glucosylation product of resveratrol, synthesized by BaSP Q345F was solved. It proved that the domain shift is in fact responsible for the ability of the variant to glycosylate aromatic compounds. Simultaneously a ligand free crystal structure of BaSP Q345F disproved an induced fit effect as the cause of the domain shift. The missing link, a crystal structure of BaSP Q345F in the F-conformation is obtained. This does not feature the domain shift, but is in outstanding agreement with the wildtype structure. The domain shift is therefore not static but rather a step in a dynamic process. It is further conceivable that the domain shifted conformation of BaSP Q345F resembles the open conformation of the wild type and that an adjustment of a conformational equilibrium as a result of the Q345F point mutation is observed. An investigation into the background reaction, the formation of glucose-glucose disaccharides of BaSP Q345F and three further variants that addressed the same region (L341C, D316C-L341C and D316C-N340C) revealed the formation of nigerose by BaSP Q345F. N2 - Saccharose Phosphorylase aus Bifidobacterium adolescentis (BaSP) sollte durch strukturbasiertes Enzym-Engineering in die Lage versetzt werden Polyphenole zu glukosylieren. In die katalytische Tasche sollten aromatische Seitenketten eingeführt werden um die Polarität an jene der gewünschten Akzeptorsubstrate anzupassen und eine weitere Stabilisierung durch π-π-Wechselwirkungen zwischen Enzym und Substrat zu erlauben. BaSP Q345F war in der Lage die Zielsubstrate zu glukosylieren und behielt gleichzeitig ausreichen Aktivität bei. Die weitere Untersuchung dieses Enzyms ist in vier Studien beschrieben. Die Kristallstruktur einer inaktiven Variante, BaSP D192Q-Q345F in komplex mit dem Glukosylierungsprodukt Resveratrol-3-α-D-Glukosid wurde gelöst. Dadurch konnte gezeigt werden, dass einer Verschiebung einer Domäne für die Fähigkeit der Variante Glukose auf aromatische Substrate zu übertragen, verantwortlich ist. Die Orientierung des π-Systems von Resveratrol erlaubt weiterhin T-förmige π-π-Wechselwirkungen mit Phe156 und Phe345.Die detaillierte kinetische Untersuchung von BaSP Q345F mit acht Akzeptorsubstraten ergab eine starke Affinität der Variante zu den aromatischen Substraten (KM 0.08 bis 1.55 mM). Weitere Strukturdaten zeigen, dass die Verschiebung der Domäne Teil eines dynamischen Prozesses ist. Des weiteren ist die Q345F Variante in der Lage, den seltenen Zucker Nigerose zu synthetisisern. KW - enzyme engineering KW - sucrose phosphorylase KW - domain shift KW - resveratrol KW - quercetin KW - Phosphorylase KW - Glucosyltransferasen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192477 ER - TY - JOUR A1 - Steinmetzger, Christian A1 - Bäuerlein, Carmen A1 - Höbartner, Claudia T1 - Supramolecular fluorescence resonance energy transfer in nucleobase-modified fluorogenic RNA aptamers JF - Angewandte Chemie, International Edition N2 - RNA aptamers form compact tertiary structures and bind their ligands in specific binding sites. Fluorescence-based strategies reveal information on structure and dynamics of RNA aptamers. Here we report the incorporation of the universal emissive nucleobase analog 4-cyanoindole into the fluorogenic RNA aptamer Chili, and its application as a donor for supramolecular FRET to bound ligands DMHBI+ or DMHBO+. The photophysical properties of the new nucleobase-ligand-FRET pair revealed structural restraints for the overall RNA aptamer organization and identified nucleotide positions suitable for FRET-based readout of ligand binding. This strategy is generally suitable for binding site mapping and may also be applied for responsive aptamer devices. KW - RNA aptamers KW - fluorescence resonance energy transfer KW - large stokes shift KW - isomorphic nucleobase analog KW - structure probing KW - structure probes KW - stokes shift KW - Fluoreszenzresonanz-Energietransfer KW - Isomorphe Nukleobasen-Analoga KW - RNA-Aptamere KW - Stokes-Verschiebung KW - Struktursonden Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203084 N1 - Parallel erschienen in Angewandte Chemie 2020,132, 6826–6830. DOI: 10.1002/ange.201916707 (Deutsche Ausgabe). VL - 59 ER - TY - THES A1 - Kiendl, Benjamin T1 - Application of diamond nanomaterials in catalysis T1 - Anwendung von Diamantnanomaterialien in der Katalyse N2 - In this work the catalytic activity of nanodiamond particles with different dopants and surface terminations and of diamond nanomaterials funtionalized with ruthenium-based photocatalysts was investigated, illustrating materials application in photoredox chemistry and the photo(electro)catalytic reduction of CO2. Regarding the application of diamond nanomaterials in photocatalysis, methods to fabricate and characterize several (un)doped nanoparticles with different surface termination were successfully developed. Various photocatalysts, attached to nanodiamond particles via linker systems, were tested in photoredox catalysis and the photo(electro)catalytic reduction of CO2. N2 - In dieser Arbeit wurde die katalytische Aktivität von Nanodiamant-Partikeln mit unterschiedlichen Dotierungen und Oberflächenterminierungen, sowie von Diamant-Nanomaterialien, die mit Photokatalysatoren auf Rutheniumbasis funktionalisiert wurden, untersucht. Die Verwendung der Materialien in Photoredox-Experimenten und in der photo(elektro)katalytischen Reduktion von CO2 konnte verdeutlicht werden. Für die Verwendung von Diamant-Nanomaterialien in der Photokatalyse wurden erfolgreich Methoden zur Herstellung und Charakterisierung zahlreicher (un)dotierter Nanopartikeln mit unterschiedlicher Oberflächenterminierung entwickelt. Verschiedenartige Photokatalysatoren, die mit Hilfe von Linker-Systemen an Nanodiamant-Partikel angebunden wurden, wurden in der Photoredox-Katalyse und der photoelektrokatalytischen Reduktion von CO2 untersucht. KW - Fotokatalyse KW - Synthesediamant KW - diamond KW - nanomaterials KW - photocatalysis KW - Diamant Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-179415 ER - TY - JOUR A1 - Hollmann, Claudia A1 - Wiese, Teresa A1 - Dennstädt, Fabio A1 - Fink, Julian A1 - Schneider-Schaulies, Jürgen A1 - Beyersdorf, Niklas T1 - Translational approaches targeting ceramide generation from sphingomyelin in T cells to modulate immunity in humans JF - Frontiers in Immunology N2 - In T cells, as in all other cells of the body, sphingolipids form important structural components of membranes. Due to metabolic modifications, sphingolipids additionally play an active part in the signaling of cell surface receptors of T cells like the T cell receptor or the co-stimulatory molecule CD28. Moreover, the sphingolipid composition of their membranes crucially affects the integrity and function of subcellular compartments such as the lysosome. Previously, studying sphingolipid metabolism has been severely hampered by the limited number of analytical methods/model systems available. Besides well-established high resolution mass spectrometry new tools are now available like novel minimally modified sphingolipid subspecies for click chemistry as well as recently generated mouse mutants with deficiencies/overexpression of sphingolipid-modifying enzymes. Making use of these tools we and others discovered that the sphingolipid sphingomyelin is metabolized to ceramide to different degrees in distinct T cell subpopulations of mice and humans. This knowledge has already been translated into novel immunomodulatory approaches in mice and will in the future hopefully also be applicable to humans. In this paper we are, thus, summarizing the most recent findings on the impact of sphingolipid metabolism on T cell activation, differentiation, and effector functions. Moreover, we are discussing the therapeutic concepts arising from these insights and drugs or drug candidates which are already in clinical use or could be developed for clinical use in patients with diseases as distant as major depression and chronic viral infection. KW - sphingolipids KW - CD4+ T cells KW - regulatory T cells (Treg) KW - CD8+ T cells KW - anti-depressant drug Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198806 SN - 1664-3224 VL - 10 IS - 2363 ER - TY - THES A1 - Buschmann, Rachel Abigail T1 - Synthesis of annulated pi-systems based on a tribenzotriquinacene core T1 - Synthese von annellierten pi-Systemen auf Basis eines Tribenzotriquinacenkerns N2 - The aim of this work was the selective functionalisation of tribenzotriquinacene (TBTQ) in order to extend the aromatic system and tune the electronic properties. The synthesised molecules could be starting materials for a model system of a defective graphene fragment. The “triple cyclisation pathway” by Hopf et al. was adapted and fluorinated tribenzotriquinacenes were synthesised for the first time. Phenanthrene groups were also introduced in other model systems and the crystal structures of phenanthrene functionalised TBTQs were compared with the parent molecules. In addition, the arrangement of TBTQ and centro methyl functionalised TBTQ was investigated on a Ag(111) surface for the first time using scanning transmission microscopy (STM). Different arrangements were observed, depending on the coverage of the surface. The insights gained about the interaction between TBTQs as well as their synthesis provide a foundation for further work and potential applications as components in organic electronic devices. N2 - Das Ziel diese Arbeit war die gezielte Funktionalisierung von Tribenzotriquinacen (TBTQ), um dessen aromatisches System zu erweitern und die elekronischen Eigenschaften zu verändern. Diese Zielmoleküle könnten sich als Ausgangsmoleküle für ein Modellsystem für ein gewölbtes Graphenfragment eignen. Die „dreifache Cyclisierungsroute“ von Hopf et al. wurde hierfür adaptiert und es wurden erstmals fluorierte Tribenzotriquinacene synthetisiert. In anderen Modellsystemen wurden Phenanthren-Einheiten eingeführt und die Kristallstrukturen mit dem TBTQ-Stammsystem verglichen. Zusätzlich wurde die Anordnung von TBTQ und centro-methyliertem TBTQ zum ersten Mal auf eine Ag(111)-Oberfläche mittels Rastertunnelmikroskopie (STM) untersucht. Es konnte gezeigt werden, dass neben der zentralen Methylgruppe auch der Grad der Oberflächenabdeckung unterschiedliche Anordnung der Moleküle auf der Oberfläche zur Folge hatte. Die aus dieser Arbeit gewonnenen Erkenntnisse über die Wechselwirkungen zwischen TBTQs sowie deren Synthese dienen als Grundlage für weitere Arbeiten und potenzielle organische Bausteine für elektronische Anwendungen. KW - Triquinacenderivate KW - Chemische Synthese KW - Aromatically annulated triquinacenes KW - Aromatisch anellierte Triquinacene KW - triquinacene derivatives KW - curved hydrocarbons KW - gekrümmte Kohlenwasserstoffe Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193491 ER - TY - THES A1 - Wagner, Wolfgang T1 - Supramolecular Block Copolymers by Seeded Living Supramolecular Polymerization of Perylene Bisimides T1 - Supramolekulare Blockcopolymere von Perylenbisimiden mittels saat-induzierter lebender supramolekularer Polymerisation N2 - The research on supramolecular polymerization has undergone a rapid development in the last two decades, particularly since supramolecular polymers exhibit a broad variety of functionalities and applications in organic electronics, biological science or as functional materials (Chapter 2.1). Although former studies have focused on investigation of the thermodynamics of supramolecular polymerization (Chapter 2.2), the academic interest in the recent years shifted towards gaining insight into kinetically controlled self-assembly and pathway complexity to generate novel out-of-equilibrium architectures with interesting nanostructures and features (Chapter 2.3). Along this path, the concepts of seeded and living supramolecular polymerization were recently developed to enable the formation of supramolecular polymers with controlled length and low polydispersity under precise kinetic control (Chapter 2.4). Besides that, novel strategies were developed to achieve supramolecular copolymerization resulting in complex multicomponent nanostructures with different structural motives. The classification of these supramolecular copolymers on the basis of literature examples and an overview of previously reported principles to create such supramolecular architectures are provided in Chapter 2.5. The aim of the thesis was the non-covalent synthesis of highly desirable supramolecular block copolymers by the approach of living seeded supramolecular polymerization and to study the impact of the molecular shape of the monomeric building blocks on the supramolecular copolymerization. Based on the structure of the previously investigated PBI organogelator H-PBI a series of novel PBIs, bearing identical hydrogen-bonding amide side-groups in imide-position and various kind or number of substituents in bay-position, was synthesized and analyzed within this thesis. The new PBIs were successfully obtained in three steps starting from the respective bromo-substituted perylene-3,4:9,10-tetracarboxylic acid tetrabutylesters or from the N,N’-dicyclohexyl-1,7-dibromoperylene-3,4:9,10-tetracarboxylic acid bisimide. All target compounds were obtained in the final step by imidization reactions of the respective perylene tetracarboxylic acid bisanhydride precursors with N-(2-aminoethyl)-3,4,5-tris(dodecyloxy)-benzamide and were fully characterized by 1H and 13C NMR spectroscopy as well as high resolution mass spectrometry. The variation of bay-substituents strongly changes the optical properties of the monomeric PBIs which were investigated by UV/vis and fluorescence spectroscopy. The increase of the number of the methoxy-substituents provokes, for example, a red-shift of the absorption maxima concomitant with a decrease of extinction coefficients and leads to a drastic increase of the fluorescence quantum yields. Furthermore, the molecular geometry of the PBIs is also affected by variations of the bay-substituents. Thus, increasing the steric demand of the bay-substituents leads to an enlargement of the twist angles of the PBI cores as revealed by DFT calculations. Especially the 1,7-dimethoxy bay-substituted MeO-PBI proved to be very well-suited for the studies envisioned within this thesis. The self-assembly of this PBI derivative was analyzed in detail by UV/vis, fluorescence and FT-IR spectroscopy as well as atomic force microscopy (Chapter 3). These studies revealed that MeO-PBI forms in a solvent mixture of methylcyclohexane and toluene (2:1, v/v) kinetically trapped off-pathway H-aggregated nanoparticles upon fast cooling of a monomeric solution from 90 to 20 °C. However, upon slow cooling of the monomer solution fluorescent J-type nanofibers are formed by π π interactions and intermolecular hydrogen-bonding. The kinetically metastable off-pathway H-aggregates can be transformed into the thermodynamically more favored J-type aggregates by addition of seeds, which are produced by ultrasonication of the polymeric nanofibers. Interestingly, the living character of this seed-induced supramolecular polymerization process was proven by a newly designed multicycle polymerization experimental protocol. This living polymerization experiment clearly proves, that the polymerization can only occur at the “active” ends of the polymeric seed and that almost no recombination or chain termination processes are present. Hence, the approach of living supramolecular polymerization enables the formation of supramolecular polymers with controlled length and narrow polydispersity. In Chapter 4 the copolymerization of MeO-PBI with the structurally similar 1,7-dichloro (Cl-PBI) and 1,7-dimethylthio (MeS-PBI) bay-substituted PBIs is studied in detail. Both PBIs form analogous to MeO-PBI kinetically trapped off-pathway aggregates, which can be converted into the thermodynamically stable supramolecular polymers by seed-induced living supramolecular polymerization under precise kinetic control. However, the stability of the kinetically trapped aggregates of Cl-PBI and MeS-PBI is distinctly reduced compared to that of MeO-PBI, because the π-π-interactions of the kinetically metastable aggregates are hampered through the increased twisting of the PBI-cores of the former PBIs. UV/vis studies revealed that the two-component seeded copolymerization of the kinetically trapped state of MeO-PBI with seeds of Cl-PBI leads to the formation of unprecedented supramolecular block copolymers with A-B-A pattern by a living supramolecular polymerization process at the termini of the seeds. Remarkably, the resulting A-B-A block pattern of the obtained copolymers was clearly confirmed by atomic force microscopy studies as the respective blocks formed by the individual monomeric units could be distinguished by the pitches of the helical nanofibers. Moreover, detailed UV/vis and AFM studies have shown that by inverted two-component seed-induced polymerization, e.g., upon addition of seeds of MeO-PBI to the kinetically trapped aggregates of Cl-PBI, triblock supramolecular copolymers with B-A-B pattern can be generated. The switching of the block pattern could only be achieved because of the perfectly matching conditions for the copolymerization process and the tailored molecular geometry of the individual building blocks of both PBIs. These studies have demonstrated for the first time, that the block pattern of a supramolecular copolymer can be modulated by the experimental protocol through the approach of living supramolecular polymerization. Furthermore, by UV/vis analysis of the living copolymerization of MeO-PBI and MeS-PBI similar results were obtained showing also the formation of both A-B-A and B-A-B type supramolecular block copolymers. Although for these two PBIs the individual blocks could not be identified by AFM because the helical nanofibers of both PBIs exhibit identical helical pitches, these studies revealed for the first time that the approach of seeded living polymerization is not limited to a special pair of monomeric building blocks. In the last part of the thesis (Chapter 5) a systematic study on the two-component living copolymerization of PBIs with various sterical demanding bay-substituents is provided. Thus, a series of PBIs containing identical hydrogen-bonding amide groups in imide position but variable number (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) or size (EtO-PBI, iPrO-PBI) of alkoxy bay-substituents was investigated. The molecular geometry of the monomeric building blocks has a strong impact on the thermodynamically and even more pronounced on the kinetically controlled aggregation in solvent mixtures of MCH and Tol. While the mono- and dialkoxy-substituted PBIs form kinetically metastable species, the self-assembly of the tri- and tetramethoxy-substituted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) is completely thermodynamically controlled. The two 1,7-alkoxy substituted PBIs (EtO-PBI, iPrO-PBI) form very similar to MeO-PBI kinetically off-pathway H-aggregates and thermodynamically more favored J-type aggregates. However, the stability of the kinetically metastable state is drastically lower and the conversion into the thermodynamically favored state much faster than for MeO-PBI. In contrast, the monomethoxy-substituted PBI derivative (1-MeO-PBI) forms a kinetically trapped species by intramolecular hydrogen-bonding of the monomers, which can be transformed into the thermodynamically favored nanofibers by seeded polymerization. Importantly, the two-component seeded copolymerization of the kinetically trapped MeO PBI with seeds of other PBIs of the present series was studied by UV/vis and AFM revealing that the formation of supramolecular block copolymers is only possible for appropriate combinations of PBI building blocks. Thus, the seeded polymerization of the trapped state of the moderately core-twisted MeO-PBI with the, according to DFT-calculations, structurally similar PBIs (EtO-PBI and iPrO-PBI) leads to the formation of A-B-A block copolymers, like in the seeded copolymerization of MeO-PBItrapped with seeds of Cl-PBI and MeS-PBI already described in Chapter 4. However, by addition of seeds of the almost planar PBIs (H-PBI and 1-MeO-PBI) or seeds of the strongly core-twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) to the kinetically trapped state of MeO-PBI no block copolymers can be obtained. The mismatching geometry of these molecular building blocks strongly hampers both the intermolecular hydrogen-bonding and the π-π-interactions between the two different PBIs and consequently prevents the copolymerization process. Furthermore, the studies of the two-component seeded copolymerization of the kinetically trapped species of 1-MeO-PBI with seeds of the other PBIs also corroborated that a precise shape complementarity is crucial to generate supramolecular block copolymers. Thus, by addition of seeds of H-PBI to the kinetically trapped monomers of 1-MeO-PBI supramolecular block copolymers were generated. Both PBIs exhibit an almost planar PBI core according to DFT-calculations leading to strong non-covalent interactions between these PBIs. This perfectly matching geometry of both PBIs also enables the inverted seeded copolymerization of the kinetically trapped monomers of H-PBI with 1-MeO-PBIseed concomitant with a switching of the block pattern of the supramolecular copolymer from A-B-A to B-A-B type. In contrast, the seeding with the moderately twisted (MeO-PBI, EtO-PBI and iPrO-PBI) and the strongly twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12 MeO-PBI) has no effect on the kinetically trapped state of 1-MeO-PBI, because the copolymerization of these PBIs is prevented by the mismatching geometry of the molecular building blocks. In conclusion, the supramolecular polymerization and two-component seeded copolymerization of a series of PBI monomers was investigated within this thesis. The studies revealed that the thermodynamically and kinetically controlled self-assembly can be strongly modified by subtle changes of the monomeric building blocks. Moreover, the results have shown that living supramolecular polymerization is an exceedingly powerful method to generate unprecedented supramolecular polymeric nanostructures with controlled block pattern and length distribution. The formation of supramolecular block copolymers can only be achieved under precise kinetic control of the polymerization process and is strongly governed by the shape complementarity already imparted in the individual components. Thus, these insightful studies might enable a more rational design of monomeric building blocks for the non-covalent synthesis of highly complex supramolecular architectures with interesting properties for possible future applications, e.g., as novel functional materials. N2 - Das Forschungsgebiet der supramolekularen Polymerisation hat sich in den letzten Jahrzehnten sehr rasch entwickelt, zumal da supramolekulare Polymere eine Fülle an Anwendungsmöglichkeiten in der organischen Elektronik, der Biologie oder als Funktionsmaterialen bieten (Kapitel 2.1). Während frühere Studien den Fokus auf die Untersuchung der Thermodynamik der supramolekularen Polymerisation gelegt haben (Kapitel 2.2), hat sich das akademische Interesse in jüngster Zeit dahingehend verschoben, Einblicke in kinetisch kontrollierte Selbstassemblierungsprozesse zu erhalten, um neuartige Strukturen mit faszinierenden Eigenschaften zu generieren (Kapitel 2.3). Im Zuge dieser Entwicklung wurde das Konzept der Saat-induzierten und der lebenden supramolekularen Polymerisation entwickelt, welche die Bildung von supramolekularen Polymeren mit geringer Polydispersität in kinetisch kontrollierten Prozessen ermöglichen (Kapitel 2.4). Des Weiteren wurden neue Strategien zu Erzeugung von Nanostrukturen entwickelt, die aus verschiedenen Komponenten aufgebaut sind und somit neue komplexe Strukturmotive zeigen. Eine Einteilung dieser supramolekularen Copolymere anhand einiger Literaturbeispiele und eine kurze Übersicht über die bisherigen Methoden, solche supramolekularen Strukturen zu erzeugen ist in Kapitel 2.5 dargestellt. Das Ziel der Doktorarbeit war die nicht-kovalente Synthese von erstrebenswerten supramolekularen Blockcopolymeren mittels lebender Saat-induzierter Polymerisation und zu erforschen, wie die molekulare Form der Monomerbausteine die supramolekulare Copolymerisation beeinflusst. Basierend auf der Molekülstruktur des zuvor untersuchten Perylenbisimidfarbstoffes H-PBI wurden in dieser Arbeit eine Reihe von neuen Perylenbisimiden mit identischen Amid-Seitengruppen in Imidposition und unterschiedlicher Art oder Anzahl von Buchtsubstituenten synthetisiert und charakterisiert. Die neuen Perylenbisimide wurden erfolgreich in drei Stufen durch neu entwickelte Syntheserouten erhalten, wobei von den jeweiligen Brom substituierten Perylen-3,4:9,10-tetracarbonsäuretetrabutylestern oder von N,N‘ Dicyclohexyl-1,7-dibromperylen-3,4:9,10-tetracarbonsäurebisimid ausgegangen wurde. Alle Zielverbindungen wurden im letzten Syntheseschritt mittels einer Imidisierungsreaktion der jeweiligen Perylenbisanhydridvorstufen mit N (2-Aminoethyl)-3,4,5-tris(dodecyloxy)benzamid erhalten und mittels 1H- und 13C NMR-Spektroskopie sowie mit hochauflösender Massenspektrometrie charakterisiert. Die Variation der Buchtsubstituenten hat einen starken Einfluss auf die optischen Eigenschaften der Perylenbisimidmonomere, was mittels UV/vis- und Fluoreszenzspektroskopie untersucht wurde. Die ansteigende Zahl der Methoxysubstituenten verursacht zum Beispiel eine Rotverschiebung der Absorptionsmaxima, welche mit einer Abnahme der Extinktionskoeffizienten einhergeht, und führt zu einem starken Anstieg der Fluoreszenzquantenausbeute. Außerdem wird auch die Molekülgeometrie der Perylenbisimide durch die Variation der Buchtsubstituenten beeinflusst. Mittels DFT-Rechnungen konnte gezeigt werden, dass eine Zunahme des sterischen Anspruchs der Buchtsubstituenten eine Vergrößerung des Torsionswinkels der Perylenbisimidkerne zur Folge hat. Als besonders geeignet für die im Rahmen dieser Arbeit anvisierten Studien erwies sich das mit zwei Methylgruppen in 1,7-Buchtposition substituierte MeO-PBI. Die Selbstassemblierung dieses 1,7-Dimethoxy-substituierten Perylenbisimid-Derivates wurde mit Hilfe von UV/vis-, Fluoreszenz- und FT-IR-Spektroskopie sowie mittels Rasterkraftmikroskopie detailliert analysiert (Kapitel 3). Diese Studien haben gezeigt, dass MeO-PBI in einem Lösungsmittelgemisch aus Methylcyclohexan und Toluol (2:1, v/v) in einem kinetisch kontrollierten Prozess durch schnelles Abkühlen der Monomerlösung von 90 auf 20 °C „off-pathway“ Nanopartikel ausbildet. Durch langsames Abkühlen der Monomerlösung entstehen hingegen fluoreszierende, J-aggregierte Nanofasern aufgrund von π-π-Wechselwirkungen und intermolekularen Wasserstoffbrückenbindungen. Die kinetisch metastabilen „off-pathway“ H-Aggregate können durch Zugabe einer polymeren J-Aggregat-Saat, welche durch eine Behandlung der polymeren Nanofasern mit Ultraschall gewonnen werden kann, in die thermodynamisch begünstigten J-Aggregate transformiert werden. Außerdem wurde der lebende Charakter dieser supramolekularen Saat-induzierten Polymerisation durch ein neu entworfenes multizyklisches Versuchsprotokoll nachgewiesen. Diese Experimente zur lebenden supramolekularen Polymerisation zeigen deutlich, dass der Polymerisationsprozess nur an den „aktiven“ Enden der polymeren Saat stattfinden kann und dass außerdem kaum Rekombinations- oder Kettenterminationsprozesse auftreten. Folglich ermöglicht die Methode der lebenden supramolekularen Polymerisation die Synthese von supramolekularen Polymeren mit kontrollierbarer Polymerlänge und geringer Polydispersität. In Kapitel 4 wird die Copolymerisation von MeO-PBI mit den strukturell ähnlichen 1,7 Dichlor- (Cl-PBI) und 1,7-Dimethylthiosubstituierten (MeS-PBI) Perylenbisimiden ausgeführt. Beide neuen Perylenbisimide bilden analog zu MeO-PBI „off-pathway“ Aggregate, die durch Saatzugabe in einem kinetisch kontrollierten Prozess in die thermodynamisch stabileren supramolekularen Polymere umgewandelt werden können. Die Stabilität der kinetisch gefangenen Aggregate von Cl-PBI und MeS-PBI ist jedoch verglichen mit den metastabilen Aggregaten von MeO-PBI deutlich geringer, da die π π Wechselwirkungen zwischen den molekularen Bausteinen aufgrund des vergrößerten Torsionswinkels der Peryleneinheiten stark reduziert sind. UV/vis-spektroskopische Studien zeigen, dass die Saat-induzierte Copolymerisation des kinetisch gefangenen Zustandes von MeO-PBI mit der Saat von Cl-PBI durch einen lebenden Kettenwachstumsprozess an den Polymerenden der Saat zur Ausbildung von neuartigen supramolekularen Blockcopolymeren mit A B A Blockstruktur führt. Die erzeugte A-B-A-Blockstruktur der erhaltenen Copolymere konnte eindeutig mittels Rasterkraftmikroskopie bestätigt werden, da die jeweiligen Polymerblöcke bestehend aus den einzelnen monomeren Einheiten anhand der Ganghöhe der helikalen Nanofasern unterschieden werden können. Ausführliche UV/vis- und Rasterkraftmikroskopiestudien haben außerdem demonstriert, dass, zum Beispiel durch Zugabe der Saat von MeO-PBI zu den kinetisch gefangenen Aggregaten von Cl PBI, Triblockcopolymere mit B-A-B-Blockstruktur in einer invertierten Saat-induzierten Zweikomponenten-Copolymerisation, erzeugt werden können. Dieser Wechsel der Blockstruktur kann nur durch perfekt abgestimmte Bedingungen für die Copolymerisation und bei übereinstimmender Molekülgeometrie der Monomereinheiten erreicht werden. Diese Studien zeigen erstmals, dass die Blockstruktur der supramolekularen Polymere durch das Versuchsprotokoll der lebenden supramolekularen Polymerisation variiert werden kann. Des Weiteren lieferten UV/vis-spektroskopische Untersuchungen der lebenden Copolymerisation von MeO-PBI und MeS-PBI ähnliche Ergebnisse, was darauf hindeutet, dass ebenfalls supramolekulare Blockcopolymere mit A-B-A- und B-A-B-Struktur gebildet werden können. Obwohl die einzelnen Polymerblöcke in diesem Fall wegen der identischen Helixganghöhe der Nanofasern nicht zugeordnet werden konnten, so zeigten diese Experimente doch, dass die Methode der Saat-induzierten lebenden Polymerisation nicht auf ein spezielles Paar von Monomerbausteinen limitiert ist. Im letzten Abschnitt der Doktorarbeit (Kapitel 5) wird eine systematische Studie der lebenden Zweikomponenten-Copolymerisation von Perylenbisimiden mit unterschiedlich sterisch anspruchsvollen Buchtsubstituenten dargestellt. Dementsprechend wurde eine Reihe von Perylenbisimiden mit identischen Amidseitenketten, aber unterschiedlicher Anzahl (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) oder Größe (EtO PBI, iPrO-PBI) der Alkoxybuchtsubstituenten untersucht. Die Molekülgeometrie der Monomereinheiten hat einen starken Einfluss auf das thermodynamisch und mehr noch auf das kinetisch kontrollierte Aggregationsverhalten in Lösungsmittelgemischen aus Methylcyclohexan und Toluol. Während die mono- und dialkoxysubstituierten Perylenbisimide kinetisch metastabile Zustände ausbilden, findet die Selbstassemblierung der tri- und tetramethoxysubstituierten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) vollständig unter thermodynamischer Kontrolle statt. Die zwei 1,7 alkoxysubstituierten Perylenbisimide (EtO-PBI, iPrO-PBI) bilden analog zu MeO PBI sowohl kinetische „off-pathway“ H-Aggregate als auch thermodynamisch begünstigte J Aggregate. Verglichen mit MeO-PBI ist jedoch die Stabilität der kinetisch metastabilen Zustände von EtO-PBI und iPrO-PBI viel geringer und die Umwandlung in die thermodynamisch stabileren Aggregate geschieht daher viel schneller. Das monomethoxysubstituierte Perylenbisimid-Derivat (1 MeO PBI) bildet im Gegensatz dazu kinetisch gefangene Monomere durch intramolekulare Wasserstoffbrücken-bindungen, welche sich durch Saat-induzierte Polymerisation in die thermodynamisch begünstigteren Nanofasern transformieren lassen. Die Saat-induzierte Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von MeO-PBI durch Saatzugabe der anderen Perylenbisimide der Reihe wurde mittels UV/vis-Spektroskopie und Rasterkraftmikroskopie analysiert. Diese Studien eröffneten, dass die Bildung von supramolekularen Blockcopolymeren nur für geometrisch passende Kombinationen der Perylenbisimide möglich ist. Dementsprechend führt die Saat-induzierte Polymerisation des kinetisch gefangenen Zustands von MeO-PBI mit den, laut DFT Rechnungen, strukturell ähnlichen Perylenbisimiden (EtO-PBI, iPrO-PBI) zur Bildung von A B A Blockcopolymeren, analog zu dem im Kapitel 4 beschriebenem Fall der Saat induzierten Copolymerisation mit Cl-PBI und MeS-PBI. Die Zugabe einer Saat der planaren Perylenbisimide (H-PBI, 1-MeO-PBI) oder der Perylenbisimide mit stark verdrehten Perylenkernen (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) zum kinetisch metastabilen Zustand von MeO-PBI führt dagegen nicht zur Bildung von Blockcopolymeren. Der Unterschied in der Molekülgeometrie dieser Monomerbausteine vermindert erheblich die Stärke der π π Wechselwirkungen zwischen den unterschiedlichen Perylenbisimiden und verhindert daher deren Copolymerisation. Die Studien zur Saat induzierten Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von 1-MeO-PBI mit den anderen Perylenbisimiden der Serie bestätigte weiterhin, dass eine genaue Übereinstimmung der molekularen Geometrie entscheidend für die Erzeugung von supramolekularen Blockcopolymeren ist. Durch Zugabe der Saat von H-PBI zum kinetisch metastabilen Zustand von 1-MeO-PBI konnten folglich supramolekulare Blockcopolymere generiert werden. Mittels DFT-Rechnungen wurde gezeigt, dass beide Perylenbisimide einen relativ planaren Perylenkern aufweisen, was zu sehr starken, nicht-kovalenten Wechselwirkungen zwischen diesen beiden Monomerbausteinen führt. Die übereinstimmende Geometrie beider Perylenbisimide ermöglicht auch die invertierte Saat-induzierte Copolymerisation des kinetisch gefangenen Zustands von H-PBI mit 1-MeO-PBISaat, was mit einem Wechsel der Blockstruktur des supramolekularen Blockcopolymers von A B A zu B A B einhergeht. Die Zugabe der Saat der mäßig (EtO-PBI, iPrO PBI) und stark verdrehten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) hat im Gegensatz dazu keinen Effekt auf den kinetisch gefangenen Zustand von 1-MeO-PBI, da die Copolymerisation dieser Perylenbisimide durch die Nichtübereinstimmung der Molekülgeometrie der Monomerbausteine verhindert wird. Abschließend lässt sich zusammenfassen, dass in dieser Arbeit die supramolekulare Polymerisation und Saat-induzierte Zweikomponenten-Copolymerisation einer Reihe von Perylenbisimidmonomeren untersucht worden ist. Die Studien haben demonstriert, dass die thermodynamisch und kinetisch kontrollierten Selbstassemblierungsprozesse durch subtile Änderungen der Monomerbausteine stark variiert werden können. Außerdem zeigen die Ergebnisse, dass die lebende supramolekulare Polymerisation eine sehr leistungsfähige Methode zur Erzeugung von neuartigen supramolekularen, polymeren Nanostrukturen mit kontrollierter Blockstruktur und Längenverteilung darstellt. Die Bildung dieser supramolekularen Blockcopolymere kann nur unter präziser kinetischer Kontrolle erreicht werden und ist durch die Komplementarität der einzelnen molekularen Komponenten stark beeinflusst. Diese aufschlussreichen Studien bilden möglicherweise die Grundlage für ein rationaleres Design neuer Monomerbausteine zur nicht-kovalenten Synthese von hochkomplexen, supramolekularen Strukturen mit potentiell einzigartigen Eigenschaften für mögliche Anwendungen, beispielsweise als neuartige Funktionsmaterialien. KW - Supramolekulare Chemie KW - Perylenbisdicarboximide KW - Lebende Polymerisation KW - Aggregation KW - Supramolecular Block Copolymers KW - Perylenbisimides KW - Kinetic Self-assembly KW - Living Polymerisation KW - Organische Chemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193004 ER - TY - JOUR A1 - Steinmetzger, Christian A1 - Bessi, Irene A1 - Lenz, Ann-Kathrin A1 - Höbartner, Claudia T1 - Structure-fluorescence activation relationships of a large Stokes shift fluorogenic RNA aptamer JF - Nucleic Acids Research N2 - The Chili RNA aptamer is a 52 nt long fluorogen-activating RNA aptamer (FLAP) that confers fluorescence to structurally diverse derivatives of fluorescent protein chromophores. A key feature of Chili is the formation of highly stable complexes with different ligands, which exhibit bright, highly Stokes-shifted fluorescence emission. In this work, we have analyzed the interactions between the Chili RNA and a family of conditionally fluorescent ligands using a variety of spectroscopic, calorimetric and biochemical techniques to reveal key structure - fluorescence activation relationships (SFARs). The ligands under investigation form two categories with emission maxima of ~540 nm or ~590 nm, respectively, and bind with affinities in the nanomolar to low-micromolar range. Isothermal titration calorimetry was used to elucidate the enthalpic and entropic contributions to binding affinity for a cationic ligand that is unique to the Chili aptamer. In addition to fluorescence activation, ligand binding was also observed by NMR spectroscopy, revealing characteristic signals for the formation of a G-quadruplex only upon ligand binding. These data shed light on the molecular features required and responsible for the large Stokes shift and the strong fluorescence enhancement of red and green emitting RNA-chromophore complexes. KW - Chili RNA Aptamer KW - fluorogen-activating RNA aptamer (FLAP) KW - Stokes-shifted fluorescence emission KW - key structure - fluorescence activation relationships (SFARs) KW - ligand binding Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192340 ER - TY - THES A1 - Mufusama Koy Sita, Jean-Pierre T1 - Quality Assessment of Antimalarial Medicines Sold in the Democratic Republic of the Congo and Phytochemical Investigations on a Congolese Ancistrocladus Liana T1 - Qualitätsbewertung der in der Demokratischen Republik Kongo vermarkteten Malariamittel sowie phytochemische Untersuchung einer kongolesichen Ancistracladus-Liane N2 - Nowadays, the management of infectious diseases is especially threatened by the rapid emergence of drug resistance. It has been suggested that the medicine quality assurance combined with good medication adherence may help to reduce this impendence. Moreover, the search for new antimicrobial agents from medicinal plants is strongly encouraged for the exploration of alternatives to existing therapies. In this context, the present work focused on both the quality evaluation of commercialized antimalarial medicines from the Democratic Republic of the Congo and on the phytochemical investigations of a Congolese Ancistrocladus species. N2 - Heute ist die Behandlung von Infektionskrankheiten besonders durch das schnelle Auftreten von Arzneimittelresistenzen bedroht. Es wurde vorgeschlagen, dass eine gute Arzneimittelqualitätssicherung in Verbindung mit einer sicheren Medikamentenhaftung dazu beitragen kann, dieser Gefahr entgegenzuwirken. Darüber hinaus wird unter anderem die Suche nach neuen antimikrobiellen Wirkstoffen aus Heilpflanzen dringend empfohlen, um nach Alternativen zu bestehenden Therapien Ausschau zu halten. In diesem Zusammenhang konzentrierte sich die vorliegende Arbeit sowohl auf die Qualitätsbewertung der in der Demokratischen Republik Kongo (DR Kongo) vermarkteten Malariamittel, als auch auf die phytochemische Untersuchung einer kongolesischen Ancistrocladus-Art. ... KW - artemether - lumefantrine KW - amodiaquine KW - Congolese Ancistrocladus plants KW - Quality assessment of antimalarial medicines from the Congo KW - Phytochemical investigations of a Congolese Ancistrocladus Liana KW - substandard and falsified medicines from the Congo KW - impurity profiling KW - capillary zone electrophoresis KW - naphthylisoquinoline alkaloids KW - Antimalariamittel KW - Demokratische Republik Kongo KW - Ancistrocladaceae KW - Phytochemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192382 ER - TY - INPR A1 - Maghami, Mohammad Ghaem A1 - Scheitl, Carolin P. M. A1 - Höbartner, Claudia T1 - Direct in vitro selection of trans-acting ribozymes for posttranscriptional, site-specific, and covalent fluorescent labeling of RNA T2 - Journal of the American Chemical Society N2 - General and efficient tools for site-specific fluorescent or bioorthogonal labeling of RNA are in high demand. Here, we report direct in vitro selection, characterization, and application of versatile trans-acting 2'-5' adenylyl transferase ribozymes for covalent and site-specific RNA labeling. The design of our partially structured RNA pool allowed for in vitro evolution of ribozymes that modify a predetermined nucleotide in cis (i.e. intramolecular reaction), and were then easily engineered for applications in trans (i.e. in an intermolecular setup). The resulting ribozymes are readily designed for specific target sites in small and large RNAs and accept a wide variety of N6-modified ATP analogues as small molecule substrates. The most efficient new ribozyme (FH14) shows excellent specificity towards its target sequence also in the context of total cellular RNA. KW - covalent and site-specific RNA labeling KW - trans-acting 2'-5' adenylyl transferase ribozymes KW - in vitro selection from a structured RNA library KW - Ribozyme-catalyzed RNA labeling KW - intermolecular applications of ribozymes Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192333 N1 - This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in Journal of the American Chemical Society, copyright © American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/jacs.9b10531. ER - TY - THES A1 - Kaufmann, Christina T1 - Discrete Supramolecular Architectures of Bay-linked Perylene Bisimide Dimers by Self-Assembly and Folding T1 - Diskrete supramolekulare Architekturen bucht-verknüpfter Perylenbisimid Dimere durch Selbstassemblierung und Faltung N2 - Supramolecular self-assembly of perylene bisimide (PBI) dyes via non-covalent forces gives rise to a high number of different PBI architectures with unique optical and functional properties. As these properties can be drastically influenced by only slightly structural changes of the formed supramolecular ensembles (Chapter 2.1) the controlled self-assembly of PBI dyes became a central point of current research to design innovative materials with a high potential for different applications as for example in the fields of organic electronics or photovoltaics. As PBI dyes show a strong tendency to form infinite aggregated structures (Chapter 2.2) the aim of this thesis was to precisely control their self-assembly to create small, structurally well-defined PBI assemblies in solution. Chapter 2.3 provides an overview on literature known strategies that were established to realize this aim. It could be demonstrated that especially backbone-directed intra- and intermolecular self-assembly of covalently linked Bis-PBI dyes evolved as one of the most used strategies to define the number of stacked PBI chromophores by using careful designed spacer units with regard to their length and flexibility. By using conventional spectroscopic methods like UV/Vis and fluorescence experiments in combination with NMR measurements an in-depth comparison of the molecular and optical properties in solution both in the non-stacked and aggregated state of the target compounds could be elucidated to reveal structure-property relationships of different PBI architectures. Thus, it could be demonstrated, that spacer units that pre-organize two PBI chromophores with an inter-planar distance of r < 7 Å lead to an intramolecular folding, whereas linker moieties with a length between 7 to 11 Å result in an intermolecular self-assembly of the respective Bis-PBIs dyes via dimerization to form well-defined quadruple PBI pi-stacks. Hence, if the used spacer units ensure an inter-planar distance r > 14 Å larger oligomeric PBI pi-stacks are generated. In Chapter 4 a detailed analysis of the exciton coupling in a highly defined H-aggregate quadruple PBI pi-stack is presented. Therefore, bay-tethered PBI dye Bis-PBI 1 was investigated by concentration-dependent UV/Vis spectroscopy in THF and toluene as well as by 2D-DOSY-NMR spectroscopy, ESI mass spectrometry and AFM measurements confirming that Bis-PBI 1 self-assembles exclusively into dimers with four closely pi-stacked PBI chromophores. Furthermore, with the aid of broadband fluorescence upconversion spectroscopy (FLUPS) ensuring broadband detection range and ultrafast time resolution at once, ultrafast Frenkel exciton relaxation and excimer formation dynamics in the PBI quadruple pi-stack within 1 ps was successfully investigated in cooperation with the group of Dongho Kim. Thus, it was possible to gain for the first time insights into the exciton dynamics within a highly defined synthetic dye aggregate beyond dimers. By analysing the vibronic line shape in the early-time transient fluorescence spectra in detail, it could be demonstrated that the Frenkel exciton is entirely delocalized along the quadruple stack after photoexcitation and immediately loses its coherence followed by the formation of the excimer state. In Chapter 5 four well-defined Bis-PBI folda-dimers Bis-PBIs 2-4 were introduced, where linker units of different length (r < 7 Å) and steric demand were used to gain distinct PBI dye assemblies in the folded state. Structural elucidation based on in-depth UV/Vis, CD and fluorescence experiments in combination with 1D and 2D NMR studies reveals a stacking of the two PBI chromophores upon folding, where geometry-optimized structures obtained from DFT calculations suggest only slightly different arrangements of the PBI units enforced by the distinct spacer moieties. With the resulting optical signatures of Bis-PBIs 2-4 ranging from conventional Hj-type to monomer like absorption features, the first experimental proof of a PBI-based “null-aggregate” could be presented, in which long- and short-range exciton coupling fully compensate each other. Hence, the insights of this chapter pinpoint the importance of charge-transfer mediated short-range exciton coupling that can significantly influence the properties of pi-stacked PBI chromophores In the last part of this thesis (Chapter 6), spacer-controlled self-assembly of four bay-linked Bis-PBI dyes Bis-PBIs 5-8 into well-defined supramolecular architectures was investigated, where the final aggregate structures are substantially defined by the nature of the used spacer units. By systematically extending the backbone length from 7 to 15 Å defining the inter-planar distance between the tethered chromophores, different assemblies from defined quadruple PBI pi-stacks to larger oligomeric pi-stacks could be gained upon aggregation. In conclusion, the synthesis of nine covalently linked PBI dyes in combination with a detailed investigation of their spacer-mediated self-assembly behaviour in solution concerning structure-properties-relationships was presented within this thesis. The results confirm a strong exciton coupling in different types of Bis-PBI architectures e.g. folda-dimers or highly defined quadruple pi-stacks, which significantly influences their optical properties upon self-assembly. N2 - Supramolekulare Selbstorganisationsprozesse von Perylenbisimid-(PBI)-Farbstoffen über nichtkovalente Kräfte führen zu einer Vielzahl unterschiedlicher PBI-Aggregatstrukturen welche sich in ihren einzigartigen optischen und funktionellen Eigenschaften unterscheiden. Diese Eigenschaften können bereits durch leichte strukturelle Veränderungen der gebildeten supramolekularen Strukturen drastisch beeinflusst werden (Kapitel 2.1), was die kontrollierte Selbstassemblierung von PBI-Farbstoffen zu einem zentralen Punkt aktueller Forschungsarbeiten macht. Dadurch soll es ermöglicht werden, innovative Materialien zu generieren, welche ein hohes Potenzial für unterschiedlichste Anwendungen aufzeigen, wie z.B. im Bereich der organischen Elektronik oder Photovoltaik. Da PBI-Farbstoffe eine starke Tendenz zur Bildung ausgedehnter Aggregatstrukturen aufweisen (Kapitel 2.2), war das Ziel dieser Arbeit, kleine, hoch-definierte PBI-Stapel zu generieren, was über die kontrollierte Steuerung ihres Aggregationsverhaltens ermöglicht werden sollte. Kapitel 2.3 gibt dabei einen Überblick über die hierfür in der Literatur verwendeten Strategien. Dabei konnte gezeigt werden, dass vor allem eine intra- bzw. intermolekulare Organisation von kovalent-verknüpften Bis-PBI-Farbstoffen herangezogen wird, um die Anzahl der PBI-Chromophore innerhalb des Aggregates zu limitieren. Dies konnte unter anderem durch eine sorgfältige Auswahl der verwendeten Linker-Einheiten realisiert werden, vor allem hinsichtlich ihrer Länge und Flexibilität. Durch den Einsatz von UV/Vis-, Fluoreszenz- und NMR-Spektroskopie kann ein eingehender Vergleich der molekularen und optischen Eigenschaften der Farbstoffe in Lösung sowohl im monomeren als auch im aggregierten Zustand durchgeführt werden. So konnte gezeigt werden, dass Linker-Einheiten, welche zwei PBI-Chromophore mit einem interplanaren Abstand von r < 7 Å vororganisieren, zu einer intramolekularen Faltung der Bis-PBI-Farbstoffe führen, wohingegen Linker-Einheiten mit einer Länge zwischen 7 - 11 Å eine intermolekulare Selbstorganisation der jeweiligen Bis-PBI-Farbstoffe begünstigen. Gewährleistet die verwendete Linker-Einheit einen interplanaren Abstand r > 14 Å zwischen den beiden PBI-Einheiten, so kommt es zur Erzeugung größerer, oligomerer PBI-Farbstoff-Stapel. Im ersten Teil dieser Arbeit (Kapitel 4) wurde die Exzitonen-Kopplung in einem hochdefinierten PBI-Viererstapel untersucht. Zu diesem Zweck wurde Bis-PBI 1 synthetisiert, dessen Aggregationsverhalten anschließend mittels konzentrationsabhängiger UV/Vis-Spektroskopie in THF und Toluol sowie mittels 2D-DOSY-NMR-Spektroskopie, ESI-Massenspektrometrie und AFM-Messungen ermittelt werden konnte. Dadurch konnte die intermolekulare Dimerisierung von Bis-PBI 1 und damit die Ausbildung hoch-definierter PBI-Viererstapel nach erfolgter Aggregation bestätigt werden. In Zusammenarbeit mit der Gruppe von Dongho Kim konnten weiterhin mittels Femtosekunden-Breitband-Fluoreszenz-Aufkonversions-Spektroskopie (FLUPS) erstmals Einblicke in die Exzitonendynamik innerhalb eines hoch definierten synthetischen Farbstoffaggregats jenseits von Dimeren gewonnen werden. Durch die detaillierte Analyse der vibronischen Linienform der frühen transienten Fluoreszenzspektren konnte gezeigt werden, dass das anfänglich gebildete Frenkel-Exciton nach erfolgter Anregung vollständig entlang des gesamten Viererstaples delokalisiert ist. Der eindeutige Nachweis des initialen, vollständig delokalisierten Frenkel-Exziton-Zustandes und seiner Lokalisation, stellen wichtige Ergebnisse dieser Studie dar Der zweite Teil dieser Arbeit (Kapitel 5) befasste sich mit der Einführung von vier hoch-definierten Bis-PBI-Folda-Dimeren Bis-PBI 2-4, für deren Synthese Linker-Einheiten unterschiedlicher Länge (r < 7 Å) und Flexibilität verwendet wurden. So konnte jeweils eine leicht variierende Anordnung der PBI-Chromophore im gefalteten Zustand generiert werden. Durch die Strukturaufklärung auf Basis von eingehenden UV/Vis-, CD-, Fluoreszenz- und 1D- und 2D-NMR-Studien konnte für alle Farbstoffe Bis-PBIs 2-4 die Faltung zu diskreten pi-Stapeln gezeigt werden. Die aus DFT-Berechnungen gewonnenen geometrieoptimierten Strukturen lassen nur geringfügig unterschiedliche Anordnungen der PBI-Farnstoffe erkennen, welche durch die verschiedenen Linker-Einheiten verursacht werden. Durch die resultierenden optischen Signaturen der Folda-Dimere Bis-PBIs 2-4, welche vom konventionellen Hj-Aggregat bis hin zu monomerenähnlichen Absorptionsmerkmalen reichen, konnte erstmals der experimentelle Nachweis eines PBI-basierten "Null-Aggregats" erbracht werden, bei dem sich JCoul und JCT vollständig gegenseitig kompensieren. Die Erkenntnisse dieses Kapitels verdeutlichen daher den erheblichen Einfluss der sogenannte kurzreichweitigen Exzitonen-Kopplung JCT auf die optischen Eigenschaften von PBI-Aggregaten. Im letzten Teil dieser Arbeit (Kapitel 6) wurden die Selbstorganisationsprozesse in klar definierten supramolekularen Aggregatstrukturen untersucht. Durch die systematische Verlängerung der Linker-Einheiten von 7 auf 15 Å, konnten durch Selbstorganisation unterschiedliche Aggregatstrukturen von hochdefinierten PBI-Viererstapeln bis hin zu längeren PBI-Oligomeren generiert werden. Zusammenfassend wurde in dieser Arbeit eine detaillierte Übersicht des Selbstorganisationsverhaltens von neun kovalent verknüpften Bis-PBI-Farbstoffen vorgestellt, welche anschließend hinsichtlich ihrer Struktur-Eigenschafts-Beziehung untersucht wurden. Die Ergebnisse bestätigen eine starke Excitonen-Kopplung in verschiedenen Bis-PBI-Aggregaten wie z.B. PBI-Folda-Dimeren oder hochdefinierten PBI-Viererstapeln, welche die optischen Eigenschaften der Farbstoffsysteme im aggregierten Zustand signifikant beeinflusst. KW - Supramolekulare Chemie KW - Perylenderivate KW - Selbstorganisation KW - perylene bisimide dimers KW - folda-dimer KW - null-aggregate KW - exciton dynamics KW - short-range JCT-coupling KW - spacer-controlled self-assembly KW - Elektronentransfer KW - Farbstoff KW - NMR-Spektroskopie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173005 ER - TY - THES A1 - Seaf, Shaimaa Fayez Ali Mohammed T1 - Isolation, structural elucidation, and biological evaluation of Naphthylisoquinoline alkaloids from two African Ancistrocladus species T1 - Isolierung, Strukturaufklärung und Untersuchungen zum Wirkmechanismus von Naphthylisochinolin-Alkaloiden aus zwei afrikanischen Ancistrocladus-Arten N2 - The indepth metabolic profiling of the crude extracts of two African Ancistrocladus species viz. A. likoko from Central Africa and A. abbreviatus from West Africa, resulted in a total of 87 alkaloids among them 54 new ones. All of the compounds were intensely elucidated by 1D and 2D NMR, HRESIMS, as well as chemical and chiroptical techniques. Among the newly discovered compounds are quinoid naphthylisoquinolines with an ortho-diketone in the naphthalene portion, nor-naphthylisoquinoline alkaloid lacking the always present methyl group at C-1, seco-(ring cleaved) naphthylisoquinolines, and a newly discovered class of natural products called the naphthylisoindolinones. Some of the compounds displayed strong antitumoral activities against human pancreatic cancer cells and leukemia cells in-vitro. N2 - Naturstoffe aus terrestrischen, marinen und mikrobiellen Organismen werden seit langem in der Behandlung vieler Krankheiten eingesetzt.[18] Sie spielen eine Schlüsselrolle bei der Suche und Entwicklung neuer Arzneistoffe, da sie die Grundlage für viele der derzeit kommerziell verwendeten Medikamente darstellen.[68-70] Die Natur bleibt eine wertvolle und nachhaltige Quelle für neuartige Wirkstoffe. Der Einsatz hocheffizienter chemischer, chromatographischer und spektroskopischer Methoden für die Entdeckung neuer bioaktiver Naturstoffe ist dabei von zentraler Bedeutung. Eine vielversprechende Klasse von Naturstoffen sind die Naphthylisochinolin-Alkaloide, die weiterhin neue und wichtige Leitsubstanzen gegen verschiedene Erkrankungen wie Krebs, Malaria und AIDS liefern. Im Rahmen dieser Dissertation wurde durch eingehende Analyse ihrer Rohextrakte ein detailliertes Profil der Sekundärmetabolite zweier bislang wenig untersuchter Ancistrocladus-Arten, A. likoko und A. abbreviatus, erstellt. Dies führte zur Entdeckung einer Vielzahl an Alkaloiden (insgesamt 86 Verbindungen, darunter 53 neue Naturstoffe), und auch zu mehrere neuen NIQ-Unterklassen. Einige der Verbindungen zeigten starke zytotoxische Wirkungen gegen Krebszellen sowie antiplasmodiale Aktivitäten. KW - Naphthylisochinolinalkaloide KW - Naphthylisoquinoline alkaloids KW - Ancistrocladaceae KW - A. likoko KW - A. abbreviatus KW - seco-NIQs-Naphthylisoindolinone KW - alkaloids-Quinoid KW - NIQs Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-191588 ER - TY - JOUR A1 - Tshitenge, Dieudonné Tshitenge A1 - Feineis, Doris A1 - Mudogo, Virima A1 - Kaiser, Marcel A1 - Brun, Reto A1 - Bringmann, Gerhard T1 - Antiplasmodial Ealapasamines A-C,'Mixed' Naphthylisoquinoline Dimers from the Central African Liana Ancistrocladus ealaensis JF - Scientific Reports N2 - Three unusual heterodimeric naphthylisoquinoline alkaloids, named ealapasamines A-C (1–3), were isolated from the leaves of the tropical plant Ancistrocladus ealaensis J. Léonard. These ‘mixed’, constitutionally unsymmetric dimers are the first stereochemically fully assigned cross-coupling products of a 5,8′- and a 7,8′-coupled naphthylisoquinoline linked via C-6′ in both naphthalene portions. So far, only two other West and Central Ancistrocladus species were known to produce dimers with a central 6,6″-axis, yet, in contrast to the ealapasamines, usually consisting of two 5,8′-coupled monomers, like e.g., in michellamine B. The new dimers 1–3 contain six elements of chirality, four stereogenic centers and the two outer axes, while the central biaryl axis is configurationally unstable. The elucidation of the complete stereostructures of the ealapasamines was achieved by the interplay of spectroscopic methods including HRESIMS, 1D and 2D NMR (in particular ROESY measurements), in combination with chemical (oxidative degradation) and chiroptical (electronic circular dichroism) investigations. The ealapasamines A-C display high antiplasmodial activities with excellent half-maximum inhibition concentration values in the low nanomolar range. KW - structure elucidation KW - stereochemistry KW - Ancistrocladus ealaensis KW - dimers Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-170645 VL - 7 IS - 5767 ER - TY - THES A1 - Herbst [geb. Höhne], Stefanie T1 - Liquid Crystalline Perylene Bisimide Assemblies T1 - Flüssigkristalline Perylenbisimid Strukturen N2 - Thus, the main focus of this thesis was to generate and investigate new one-dimensional LC PBI J-aggregates of an entirely new PBI organization with the transition dipole moments of the chromophores arranged parallel to the columnar axis and in slipped pi-pi stacking fashion to form highly fluorescent J-aggregates. Towards this goal, the tetra-bay substituted PBI 4c bearing free NH functional groups at the imide positions and four dendrons with branched ethylhexyl alkoxy chains at the meta-position of the phenoxy spacer (Figure 8.1a) was synthesized and compared to a literature known reference PBI 1. The mesogenic dendrons ensure LC character of the dye, which was confirmed by POM, DSC and extensive X-ray analysis. Furthermore, the sterically demanding bay-substituents prevent the cofacial assembly of the chromophores and force the dyes into a slipped pi-stacked order with the main transition dipole moments of the dyes oriented parallel to the columnar axis. X-ray analysis revealed that PBI 4c assembles into columnar triple-stranded helices consisting of side-to-side stacked molecules, which organize into a Colh phase (Figure 8.1b). FT-IR experiments of a thin film and aggregates in MCH solution confirmed the formation of H-bonds between the imide moieties. Temperature-dependent investigations furthermore proved a reversible formation of H-bonds and polarized FT-IR experiments finally gave evidence for the direction of the H-bonds along the shearing respective the columnar axis (Figure 8.1c). This was additionally verified by polarized UV-Vis absorption studies of aligned thin films. The changes in the UV-Vis absorption spectra of concentration- and temperature-dependent experiments in MCH are in agreement with the formation of J-aggregates and could be fitted to a nucleation-elongation growth mechanism. Remarkably, fluorescence spectroscopy studies revealed highly emissive aggregates in solution. These various spectroscopic techniques proved the utilization of directional noncovalent forces like hydrogen-bonding and pi-pi interactions in a cooperative manner forcing the PBI molecules in an unprecedented organization of a slipped pi-stacked arrangement with the orientation of the molecular axis and the respective transition dipole moments parallel to the columns of the LC phase. By the group of Dietrich the formation of exciton-polaritons in imprinted LC pillar microcavities as consequent use of the LC 4c was reported for the first time.In the second part of this thesis the hierarchical organization of LC PBIs into defined single-, double-, triple- and quadruple-stranded J-aggregates within crystalline and columnar LC phases, partially arranged in helical supramolecular structures in dependence of the molecular design was demonstrated. This was achieved via the preparation of a library of twelve molecules PBI 3-6(a-c) (Figure 8.2a) that was synthesized by varying the substitution position of the dendrons at the phenoxy-spacer from ortho to meta or para and by introducing an additional methyl group in ortho-position. Also the length and shape of the alkoxy chains was changed. Consequently, the impact of the sterical demand of the bay substituents concerning their phase properties, molecular arrangement and exciton coupling was investigated. POM, DSC and X-ray studies revealed the formation of only crystalline phase for the ortho-substituted PBIs 3a-c, whereas the other derivatives generated SC or LC phases. The main focus was the series with the n-C12-alkoxy chains. For the corresponding PBIs 4-6b columnar LC phases were confirmed. Retrostructural analysis by modelling and simulations gave indications for a single stranded organization for PBI 3b, a double-stranded helix for PBI 6b, a triple-stranded helical arrangement for PBI 5b and a quadruple-stranded helix for PBI 4b (Figure 8.2b-d). For all four derivatives the same molecular orientation within the columns as for PBI 4c was proven by polarized FT-IR and UV-Vis absorption studies in aligned thin films. The organization in helices of different number of strands in the Cr and LC phases of PBI 3b, 4b, 5b and 6b offered a unique possibility to elucidate the influence of particular packing arrangements on dye aggregate interactions with light. In particular, it can be investigated how exciton coupling of the dyes’ transition dipole moments and fluorescence properties are affected. In this context, the spectroscopic properties were investigated in thin film, which revealed a strong bathochromic shift of the absorption maxima compared to the monomers in solution in dependence on the number of strands for PBIs 4-6b in contrast to PBI 3b (Figure 8.2e). The same tendency was observed for the respective aggregates in MCH solution. The spectral changes obtained during concentration- and temperature-dependent UV-Vis absorption studies verified the formation of J-aggregates in MCH solution and solid state. The respective aggregates are highly likely formed via a nucleation-elongation growth mechanism. Appliance of Kasha’s exciton theory on the supramolecular aggregates revealed different contributions of H- and J-type coupling for the oligo-stranded helices. Under these considerations, it delivered an explanation for the absorption and fluorescence properties of the assemblies and declares the “best” J-aggregate for the double stranded arrangement of PBI 6b with purely negative couplings among neighbour molecules and a quantum yield above 74 % of the aggregates in MCH solution. With this H-bonded PBI-based library approach of twelve derivatives it could be shown how molecular engineering of perylene bisimide dyes can be used to design defined, complex supramolecular assemblies with unprecedented packing patterns and concomitant intriguing spectroscopic properties. So far, the formation of defined liquid crystalline supramolecular structures of tetra-bay substituted PBIs by double H-bonding between free imide moieties and pi-pi interactions between the chromophores was demonstrated. The impact of the H-bonds on the molecular arrangement was investigated in the next part of this thesis. In this regard, PBIs 7 and 8 bearing a methyl or cyclohexyl group at the imide position (Figure 8.3a) were synthesized and compared to PBI 4c. The soft character of the solid state for PBIs 7 and 8 was confirmed by POM, DSC and X-ray analysis. The X-ray studies further revealed for both PBIs a change of the molecular assembly towards helical columnar structures of conventional pi-stacked chromophores (Figure 8.3b) when the directed H-bonds cannot contribute as noncovalent interactions to the assembly formation. Temperature-dependent UV-Vis absorption studies demonstrated the importance of H-bonding in MCH solution in the way that the formation of J-aggregates as for PBI 4c could not be observed for the imide substituted molecules. In the next step, the spectroscopic properties in thin film were investigated. For PBI 7 a J-type band and fluorescence spectra with an enlarged Stokes shift and increased fluorescence lifetime of 11.4 ns, compared to PBI 4c, was obtained, suggesting the generation of excimer type emission by considering the assumed conventional stacking of rotational displaced molecules from X-ray analysis. With polarized UV-Vis absorption experiments the orientation of the molecules perpendicular to the shearing direction and subsequently to the columnar axis was confirmed. These diverse investigations clearly demonstrated the imperative of H-bonds for stable, defined, LC J-aggregates with the transition dipole moments parallel to the columnar axis. With PBIs 7 and 8 it is impressively shown how small changes in the molecular structure influence the molecular arrangement dependent on the cooperation of non-covalent interactions like H-bonding and pi-pi stacking. In the last part of this thesis the generation of two-dimensional LC arrangements is presented. Since tetra-bay substituted PBIs lead always to twisted cores preventing lamellar arrangement, here 1,7-disubstitution and the simultaneous retention of the free imide positions was chosen to generate LC lamellar phases of PBIs 9a, 9b and 10 (Figure 8.4a). This molecular design was expected to form planar perylene cores that can strongly interact by pi-pi stacking and H-bonding. POM, DSC and X-ray investigations of the compounds suggest lamellar LC phases for PBIs 9a and 9b and a soft phase for PBI 10. In this regard, the goal of the formation of LC lamellar phase of PBIs could be attained. The change from dendrons with n-C12-alkoxy chains to large fork-like mesogens like in 9b clearly changed the phase properties. PBI 9b exhibits the lowest clearing point, high phase stability, least viscosity, easy shearability at room temperature and phase transitions between lamellar and Colh phases dependent on temperature. The formation of H-bonds parallel to the layers was demonstrated by polarized FT-IR experiments for all three PBIs. Concentration-dependent UV-Vis absorption studies revealed the formation of a J-type aggregate, which seems to exhibit an overall two-dimensional structure. With STM investigations the formation of lamellar structures from drop-casted 9a and 10 solutions in 1-phenyloctane on HOPG surface could be observed. Figure 8.4b illustrates a schematic possible arrangement of the molecules in the layers (here exemplarily demonstrated for PBI 9a), which has to be further confirmed by modelling and simulations. Unfortunately, fluorescence investigations of the thin films revealed non- or only slightly emissive LC states, which make them negligible for photonic applications. Nevertheless, the synthesized and analyzed compounds might be an inspiration for further investigations on the path to two-dimensional exciton transport for photonic devices. N2 - Das Hauptaugenmerk dieser Arbeit war daher darauf gerichtet, eindimensionale flüssigkristalline J-Aggregate zu erzeugen und zu untersuchen, die eine vollkommen neue Anordnung von Perylenbisimiden aufweisen und deren Übergangsdipolmomente parallel zur Säulenachse ausgerichtet sind. Um stark fluoreszierende J-Aggregate zu bilden, sollen die Moleküle zudem in einer zueinander verschobenen pi-pi-Stapelung angeordnet sein. Um dieses Ziel zu erreichen, wurde zunächst das vierfach bucht-substituierte PBI 4c synthetisiert und mit dem literaturbekannten Referenzmolekül (PBI 1) verglichen. Das PBI 4c weist dabei freie NH-Gruppen in den Imidpositionen und vier verästelte Substituenten in der meta-Position der Phenoxygruppe auf (Abbildung 1a). Die Substituenten bestehen dabei aus jeweils drei verzweigten Ethylhexyl-Alkoxyketten. Diese mesogenen Substituenten stellen den flüssigkristallinen Charakter des Farbstoffmoleküls sicher, was durch POM, DSC und umfassende Röntgenstrukturuntersuchungen bestätigt werden konnte. Weiterhin verhindern die sterisch anspruchsvollen Buchtsubstituenten eine cofaciale Anordnung der Chromophore und zwingen die Farbstoffmoleküle in zueinander verschobene, pi-gestapelte Packungsstrukturen, in denen die Übergangsdipolmomente der Perylenbisimide parallel zur Säulenachse angeordnet sind. Die Analyse der Röntgenstrukturuntersuchungen zeigt die Bildung säulenartiger, drei-strängiger Helices, die sich aus vertikal gestapelten Molekülen zusammensetzen und sich letztendlich in einer hexagonalen flüssigkristallinen Phase anordnen (Abbildung 1b). FT-IR-Experimente dünner Schichten und der Aggregate in MCH-Lösungen bestätigen, dass zwischen den Imidgruppen in der flüssigkristalline Phase und der Aggregate in Lösung die gleiche Art von Wasserstoffbrückenbindungen existiert. Durch polarisierte FT-IR-Experimente und temperaturabhängige Untersuchungen konnte weiterhin gezeigt werden, dass die Wasserstoffbrückenbindungen in diesen Systemen zum Einen entlang der Scherrichtung und der Säulenachse ausgerichtet sind und deren Bildung zum Anderen reversibel ist. Die Ausrichtung wurde zusätzlich durch polarisierte UV-Vis-Absorptionsuntersuchungen an gerichteten Dünnschichten bestätigt. Die spektralen Änderungen in konzentrations- und temperaturabhängigen UV-Vis-Absorptionsstudien in MCH stimmen mit der Bildung von J-Aggregaten überein. Die Daten konnten durch Ausgleichskurven einem kooperativen (Kernbildungs-Verlängerungs-) Mechanismus zugeordnet werden. Bemerkenswerterweise zeigten Fluoreszenzuntersuchungen, dass die Aggregate in Lösung sehr stark emittieren. Die verwendeten spektroskopischen Untersuchungsmethoden beweisen die strukturellen Einflussmöglichkeiten über gerichtete, nicht-kovalente Kräfte wie Wasserstoff-brückenbindungen und pi-pi-Wechselwirkungen in einem kooperativen Zusammenspiel zur gezielten Bildung einer bisher unbekannten Molekülanordnung in Flüssigkristallen. In dieser neuen Struktur sind die Moleküle zueinander verschoben pi-gestapelt und mit der Molekülachse und dem entsprechenden Übergangsdipolmomentes parallel zur Säulenachse ausgerichtet. Unter Verwendung von PBI 4c konnten unsere Kooperationspartner in der Technischen Physik der Universität Würzburg in der Folge erstmalig über die Bildung von Exziton-Polaritonen in aufgedruckten, flüssigkristallinen Säulenmikrokavitäten berichten.[175] Im zweiten Teil dieser Arbeit wird gezeigt, wie sich durch molekulares Design definierte ein-, zwei-, drei- und viersträngige J-Aggregate innerhalb kristalliner oder kolumnarer flüssigkristalliner Phasen bilden. Diese Aggregate bilden hierarchisch aufgebaute, supramolekulare Strukturen, die sich zu einem großen Teil in Helices organisieren. Hierfür wurden Verbindungen für eine Bibliothek, bestehend aus zwölf Molekülen PBI 3-6(a-c) (Abbildung 2a), synthetisiert, indem die Position der verästelten Substituenten an den Phenoxygruppen zwischen ortho, meta und para variiert wurde. Zusätzlich wurde noch eine Methylgruppe in ortho-Position eingeführt sowie sowohl die Länge als auch die Art der Alkoxyketten geändert. Anschließend wurde der Einfluss des sterischen Anspruchs der Buchtsubstituenten in Bezug auf die Eigenschaften der Phasen, der Molekülanordnung und der Exzitonenkopplung untersucht. POM, DSC and Röntgenstrukturanalysen bestätigten, dass die ortho-substituierten PBIs 3a-c nur kristalline Phasen ausbildeten, wohingegen die anderen Derivate sowohl weichkristalline als auch flüssigkristalline Phasen generierten. Der Fokus lag dabei auf der Untersuchung der Serie mit n-C12-Alkoxyketten und ergab die Bildung säulenartiger, flüssigkristalliner Phasen für alle drei PBIs 4-6b. Das Erstellen von Aggregatmodellen unter Verwendung der röntgenkristallografischen Daten und die Simulation von Röntgenbeugungsbildern mit Hilfe dieser Modelle ergaben eindeutig die Bildung einer einsträngigen Molekülanordnung für PBI 3b, eine Doppelstranghelix für PBI 6b, eine dreisträngige, helikale Anordnung für PBI 5b und einer viersträngigen Helix von PBI 4b (Abbildung 2b-d). Polarisierte FT-IR und UV-Vis Absorptionsexperimente bewiesen für alle vier Derivate die gleiche molekulare Orientierung in gerichteten dünnen Schichten wie bereits für PBI 4c. Die aus den Röntgenmessungen hergeleiteten Anordnungen in Helices bestehend aus einer unterschiedlichen Anzahl von Strängen in kristallinen und flüssigkristallinen Phasen von PBI 3-6b eröffneten eine einzigartige Möglichkeit, den Einfluss der molekularen Packung auf die Wechselwirkungen der Farbstoffaggregate mit Licht aufzuklären. Im Besonderen sollte dabei der Einfluss in Bezug auf die Exzitonenkopplung der Übergangsdipolmomente der Farbstoffmoleküle in UV-Vis-Absorptionsspektren und Fluoreszenzeigenschaften untersucht werden. In diesem Zusammenhang wurden die spektroskopischen Eigenschaften der Derivate in Dünnschichten untersucht. Mit Ausnahme von PBI 3b wurde eine stark bathochrome Verschiebung der Absorptionsmaxima in Abhängigkeit der Anzahl der Stränge im Vergleich zu den Absorptionsmaxima der entsprechenden Monomere in Lösung beobachtet (Abbildung 2e). Die gleiche Tendenz konnte auch für die entsprechenden Aggregate in Lösung beobachtet werden. Die festgestellten spektralen Änderungen in konzentrations- und temperatur-abhängigen Absorptionsstudien in MCH-Lösungen bestätigten die Bildung von J-Aggregaten sowohl in Lösung als auch in der Festphase. Die Anwendung von Kashas Exzitonentheorie auf die supramolekularen Aggregate zeigte, dass H- und J-Kopplungen in unterschiedlichen Teilen bei den mehrsträngigen Helices auftreten. Diese Ergebnisse lieferten auch eine Erklärung für die Absorptions- und Fluoreszenzeigenschaften der Aggregate und ergaben, dass die doppelsträngige Helix von PBI 6b mit einer Fluoreszenzquantenausbeute von über 74 % das „beste“ J-Aggregat aller getesteten Derivate bildet, da in diesem nur Anteile reiner J-Kopplungen („negativer“ Kopplungen) zwischen benachbarten Molekülen auftreten. Durch den Ansatz einer Bibliothek von zwölf über Wasserstoffbrücken verbundener PBIs konnte gezeigt werden, inwieweit der zielgerichtete strukturelle Aufbau von PBI-Farbstoffmolekülen genutzt werden kann, um definierte, hochkomplexe Strukturen mit einer bisher unbekannten molekularen Anordnung und gleichzeitig sehr interessanten spektroskopischen Eigenschaften zu erzeugen. Bis hier wurde gezeigt, wie definierte, flüssigkristalline, supramolekulare Strukturen von vierfach buchtsubstituierten PBIs durch das Zusammenwirken von Wasserstoffbrücken-bindungen zwischen den Imidpositionen und pi-pi-Wechselwirkungen zwischen den Chromophoren gebildet werden können. Der Einfluss der Wasserstoffbrückenbindungen sollte dabei im nächsten Teil näher untersucht werden. Diesbezüglich wurden PBI 7 und 8 synthetisiert, die entsprechend jeweils Methyl- oder Cyclohexylgruppen in den Imidpositionen tragen (Abbildung 3a). Anschließend wurden diese mit PBI 4c verglichen. POM, DSC und Röntgenstrukturuntersuchungen bestätigten die Bildung einer weichen Phase für PBI 7 und 8. Weiterhin ergaben die Röntgenbeugungsexperimente für beide PBIs eine Änderung der molekularen Anordnung zu helikalen, säulenartigen Aggregaten, in denen die Chromophore pi-gestapelt organisiert sind (Abbildung 3b), wenn die Wasserstoffbrückenbindungen nicht mehr als Wechselwirkungen zur Aggregatbildung beitragen können. Temperaturabhängige UV-Vis-Absorptionsstudien verdeutlichten die Relevanz der Wasserstoffbrückenbindungen in MCH-Lösungen für die Bildung von stabilen J-Aggregaten. Anders als für PBI 4c konnte die Ausbildung von J-Aggregaten in Lösung für die beiden anderen Derivate nicht beobachtet werden. Im nächsten Schritt wurden die spektroskopischen Eigenschaften in Dünnschichten untersucht. Für PBI 7 konnte eine J-artige Bande und ein Fluoreszenzspektrum mit einer besonders großen Stokesverschiebung und einer sehr langen Fluoreszenzlebensdauer im Vergleich zu den Daten von PBI 4c detektiert werden. Unter Beachtung der molekularen Anordnung von konventionell gestapelten, zueinander verdrehten Molekülen, die aus Röntgenstrukturanalysen hergeleitet wurde, deuten diese Ergebnisse auf die Erzeugung einer excimerartigen Emission hin. Die Anordnung der Moleküle senkrecht zur Scherrichtung und demzufolge auch senkrecht zur Säulenachse wurde mittels polarisierter UV-Vis-Absorptionsmessungen untermauert. Diese unterschiedlichen Untersuchungsmethoden deuten gemeinsam darauf hin, wie zwingend erforderlich Wasserstoffbrückenbindungen für die Bildung definierter, flüssigkristalliner J-Aggregate sind, in denen die Übergangsdipolmomente der Chromophore parallel zur Säulenachse ausgerichtet sind. Mit der Synthese von PBI 7 und 8 konnte eindrucksvoll gezeigt werden, wie bereits kleine Änderungen in der Molekülstruktur einen großen Einfluss auf die Aggregatstruktur haben können, wenn diese vom Zusammenwirken verschiedener nichtkovalenter Wechselwirkungen wie Wasserstoffbrückenbindungen und pi-pi Wechselwirkungen abhängig ist. Der letzte Teil dieser Arbeit handelt von der Bildung zweidimensionaler flüssigkristalliner Anordnungen. Da vierfach buchtsubstituierte PBIs immer eine Verdrehung des Kernes hervorrufen und damit die Bildung lamellarer Strukturen verhindern, wurde hier der Ansatz der Reduzierung auf eine 1,7-Zweifachsubstitution unter gleichzeitiger Beibehaltung der freien Imidgruppen gewählt. Von diesem molekularen Design wurde erwartet, dass die planaren Perylenkerne über pi-pi-Wechselwirkungen und Wasserstoffbrückenbindungen stark miteinander wechselwirken und somit zweidimensionale Aggregate bilden können. POM, DSC und Röntgenstrukturanalysen bestätigen die Bildung lamellarer flüssigkristalliner Phasen von PBI 9a und 9b (Abbildung 4a) und einer weichen Phase von PBI 10. Der Austausch der Substituenten, die n-C12-Alkoxyketten tragen, durch gabelartige Mesogene, wie bei PBI 9b, bewirkt deutliche Änderungen der Phaseneigenschaften. PBI 9b weist den niedrigsten Klärpunkt, die höchste Phasenstabilität, die geringste Viskosität, leichte Scherbarkeit bei Raumtemperatur und interessante Phasenübergänge zwischen lamellaren und säulenartig hexagonalen Phasen in Abhängigkeit der Temperatur auf. Die Bildung von Wasserstoffbrückenbindungen parallel zu den Schichten konnte mit polarisierten FT-IR-Experimenten für alle drei Derivate gezeigt werden. Konzentrationsabhängige UV-Vis-Absorptionsuntersuchungen bestätigten die Ausbildung eines J-artigen Aggregates in MCH-Lösung, welches eine zweidimensionale Struktur aufzuweisen scheint. Mittels STM-Untersuchungen konnten lamellare Strukturen von PBI 9a und 10 Schichten in 1-Phenyloktan auf hochgeordnetem pyrolytischem Graphit beobachtet werden. Abbildung 4b veranschaulicht die Anordnung der Moleküle in den Schichten, in diesem Fall exemplarisch für PBI 9a gezeigt. Leider haben Fluoreszenzuntersuchungen gezeigt, dass die Dünnschichten keine oder eine nur sehr geringe Emission aufweisen und somit nicht für photonische Anwendungen geeignet sind. Nichtsdestotrotz könnten diese Verbindungen Inspirationen für weitere Untersuchungen sein und Ansatzpunkte liefern, das Ziel eines zweidimensionalen Exzitonentransportes für photonische Anwendungen zu erreichen. KW - Flüssigkristall KW - Perylenderivate KW - Liquid Crystal KW - Perylene Bisimide KW - J-Aggregate KW - Flüssigkristall KW - Liquid Crystals KW - Perylene Bisimides KW - Perylenbisimide Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164857 ER -