TY - THES A1 - Östreicher, Sebastian T1 - Synthese und Eigenschaften neuartiger Di-, Tri- und Tetrametalloboridokomplexe T1 - Synthesis and Characterisation of Novel Di-, Tri-, and Tetrametalloborido Complexes N2 - Unter Ausnutzung der Reaktivität von Borylanionen wurden neuartige Übergangsmetallboridokomplexe synthetisiert, bei denen ein "nacktes" Boratom als Ligand für bis zu vier Übergangsmetalle vorliegt. Strukturelle und bindungstheoretische Eigenschaften der Boridokomplexe wurden mit gängigen metallorganischen Analysemethoden sowie mit DFT-Methoden untersucht. Dabei zeigte sich, dass die erhaltenen Tetrametalloboridokomplexe eine planare Koordinationsgeometrie um das Borzentrum aufweisen und damit ein Äquivalent zu anti van't Hoff/Le Bel-Verbindungen des Kohlenstoffs darstellen. N2 - Exploiting the reactivity of boryl anions, novel transition metal borido complexes were synthesised. Borido complexes feature a "naked" boron atom that serves as a ligand for up to four metals. Structucal characterisation of the boridokomplexes was carried out by means of common analytical methods as well as DFT-calculations. Tetrametalloborido complexes showed a remarkably planar geometry around the boron center and can therefore be considered as anti van't Hoff/Le Bel compounds. KW - Übergangsmetall KW - Mehrkernige Komplexe KW - Bor-Übergangsmetallverbindungen KW - Boridokomplexe KW - Borylanionen KW - anti-van't Hoff/Le Bel Verbinfungen KW - transition metal boron complexes KW - borido complexes KW - boryl anions KW - anti van't Hoff/Le Bel-compounds Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73943 ER - TY - THES A1 - Öchsner, Andreas T1 - Synthese, Struktur und Reaktivität von [2]Borametallocenophanen der Gruppe 4 Metalle : Ihr katalytisches Verhalten und die Eigenschaften der erhaltenen Polymere T1 - Synthesis, structure and reactivity of [2]borametallocenophanes of group 4 metals : Their catalytic behaviour and properties of the obtained polymers N2 - In der vorliegenden Arbeit wird die Darstellung einer Reihe monoarylsubstituierter Bisdimethylamino-1-bromo-2-arlydiborane(4) beschrieben. Sowohl die Umsetzung der monoarylsubstituierten Ligandenvorstufen mit einem weiteren Äquivalent Lithium- oder Natriumaryl in einem Ether/Toluol-Gemisch als auch die Umsetzung von 1,2-Dibrom-bis(dimethylamino)diboran(4) mit einem mehrfachen Überschuss Lithium- oder Natriumaryl führte zur Bildung von diarylsubstituierten Diboranen(4). Umsetzung der Ligandenvorstufen mit Lithiumorganylen, wie beispielsweise Li[CH3] oder Li[C4H9] führt zu doppelt deprotonierten Verbindungen. Werden die dilithiierten Verbindungen mit Metallhalogeniden der Gruppe 4 in einem Toluol/Ether-Gemisch umgesetzt, können [2]Borametallocenophane erhalten werden. Von einigen der Verbindungen konnte die Struktur im Festkörper mittels Einkristallstrukturanalyse bestimmt werden. Die Verbindungen zeigen in Lösung ein dynamisches Gleichgewicht, welches durch die Flexibilität der B-B-Brücke ermöglicht wird. Dieses konnte mittels NMR Spektroskopie untersucht werden. Auch die Reaktivität der Verbindungen wurde erforscht. Versuche zur oxidativen Addition von Platin(0) in die B-B-Bindung, wie sie bereits für ähnliche Systeme beschrieben waren, scheiterten. Ebenfalls nicht erfolgreich war der versuchte Austausch der Dimethylaminogruppen an den Bor-Atomen. Di(fluorenyl)substituierte [2]Borametallocenophane zeigen in der Reihe der dargestellten Verbindungen ein einzigartiges Verhalten. Wird die dilithiierte Liganden-Vorstufe bei der Umsetzung mit den Metallhalogeniden der Gruppe 4 Licht ausgesetzt, so lagert sie zum 1,3-Diboretan um. Auch oxidativ kann diese Umlagerung ausgelöst werden. Das Umlagerungsprodukt war von anderen Reaktionen bereits bekannt, konnte im Rahmen dieser Arbeit aber erstmals strukturell charakterisiert werden. Die Dichloroverbindungen der [2]Borametallocenophane können mittels Li[CH3] in die entsprechenden Dimethylkomplexe überführt werden. Damit besteht die Möglichkeit, die Verbindungen nicht nur mit MAO, sondern auch mit alternativen Co-Katalysatoren, wie beispielsweise Tris-(pentafluorphenyl)boran für die Olefinpolymerisation zu aktivieren. Die Aktivierung mittels MAO wurde sowohl mittels NMR- als auch mittels UV/Vis-Spektroskopie bei verschiedenen [Al]/[Zr] Verhältnissen untersucht. Neben den [2]Borametallocenonphanen konnte mit Verbindung [(n5-C29H37)2ZrCl2] das erste Metallocen mit dem neuen OctafluH-Liganden und zwei koordinierenden Arylgruppen dargestellt werden. Um die Polymerisationseigenschaften der Verbindungen zu untersuchen, wurde ein neuer Versuchsaufbau entworfen. Zur Überwachung der Polymerisationen wurde ein Programm entwickelt, was in der Lage war, verbrauchte Gasmenge und Temperatur im Reaktoraufzuzeichnen. Hier wurden die katalytischen Eigenschaften einer Serie von [2]Borametallocenophanen und des dargestellten Metallocens [(n5-C29H37)2ZrCl2] in der Ethen-Homopolymerisation untersucht. Diese Polymere wurden mittels DSC auf ihre thermischen Eigenschaften hin geprüft. Ausgewählte Polymere wurden in Zusammenarbeit mit der LyondellBasell Industries, Basell Polyolefine GmbH, Frankfurt mittels GPC auf ihr mittleres Molekulargewicht und dessen Verteilung hin untersucht. Alle Daten wurden mit denen von industriell verwendeten Katalysatoren und den von Kraft bekannten [1]Borametallocenophanen verglichen. In weiteren Untersuchungen wurde überprüft, in wie weit die Polymerisationsbedingungen, wie beispielsweise das [Al]/[Zr]-Verhältnis, die Temperatur oder der Druck Auswirkungen auf die Eigenschaften des Polymers haben. Eine Reihe von Komplexen wurde überdies in der Ethen/[1]Hexen-Copolymerisation untersucht. Die erhaltenen Copolymere wurden mittels DSC-, GPC-, IR- und NMR- Spektroskopie analysiert. Zusammenfassend lässt sich feststellen, dass eine Reihe neuer Verbindungen dargestellt und charakterisiert werden konnte, wobei insbesondere der neuartige Ligand OctafluH (C29H38) eingesetzt wurde. Die dargestellten [2]Borametallocenophane sind aktive Katalysatoren in der Ziegler-Natta ähnlichen Olefinpolymerisation. Die dargestellten Polymere wurden mittels verschiedener Methoden untersucht. Es zeigte sich, dass [2]Borametallocenophane langkettige Polyolefine und Ethen/1-Hexen Copolymere liefern können. N2 - Based on Krafts work on [1]borametallocenophanes, a various number of monoarylsubstituted bisdimethylamino-1-bromo-2-aryldiboranes(4) were synthesized in the present work. Either the reaction of these monoarylsubstituted compounds with one equivalent of a lithiumaryl in toluene/ether or direct reaction of 1,2-dibromo-bis(dimethylamino)diborane(4) with a large excess of the lithiumaryl leads to the formation of diaryl substituted diboranes(4). Reaction of the ligand precursors with lithium organyls, e.g. Li[CH3] or Li[C4H9] leads to double deprotonation. [2]Borametallocenophanes are accessible via reaction of the dilithiated species with metal halides of Group 4 in toluene/ether. Due to the flexibility of the B-B-bridge, these complexes show dynamic behaviour in solution, which can be monitored by NMR spectroscopy. The solid state structure of some of these complexes could be examined by X-Ray diffraction. The reactivity of the new [2]borametallocenophanes also was reviewed. An oxidative addition reaction of platinum(0) was published for similar systems, but failed in this case. Neither was it possible to substitute the bisdimethylamino-groups bound to the boron-atoms. The prepared di(fluorenyl)substituted [2]borametallocenophanes show a unique feature. If the dilithiated precursor is exposed to visible or UV light during reaction with metal halides of group 4, these complexes rearrange to the 1,3-diboretane. This rearrangement also can be performed oxidatively. The Compound has been previously characterized in solution by multinuclear NMR spectroscopy; its structure in the solid state is now reported for the first time. The [2]borametallocenophanedichlorides can be reacted with Li[CH3], resulting in the corresponding dimethyl complexes. This allows for an alternative activation of the complexes with co-catalysts like tris(pentafluorophenyl)borane, in addition to the common activation with MAO. A model reaction for this alternative activation was performed using K[B(C6F5)4] to obtain a ion pair via chlorine abstraction. The common activation of the metal complexes using MAO was monitored either by NMR- or by UV/Vis-spectroscopy at various [Al]/[Zr] ratios. In addition to the [2]borametallocenophanes, [(n5-C29H37)2ZrCl2] could be prepared. It is the first metallocene with two aryl groups of the new octafluH-ligand (C29H38). To analyse the activity of the compounds in olefin polymerization processes, a new experimental set-up was designed. To control the polymerisation reactions, a Software program was developed, which allowed us to record gas-consumption and temperature in the reactor simultaneously. The catalytic behaviour of a whole series of [2]borametallocenophanes and of compound [(η5-C29H37)2ZrCl2] was studied in ethene homopolymerization. The thermal properties of all produced polymers where analyzed by DSC. The molecular weight distribution of selected examples was studied in cooperation with LyondellBasell Industries, Basell Polyolefine GmbH with GPC analyses. All data where directly compared to reference catalysts and to the [1]borametallocenophanes made by Kraft. The data show, that [2]borametallocenophanes have lower activities than [1]borametallocenophanes, but produce polymers of significantly higher average molecular weight. One can see clear differences throughout the data of the DSC measurements, for instance in the melting point and metling range, or crystallinity of the polymer. The melting points of the polymers obtained from [2]borametallocenophanes and compound [(n5-C29H37)2ZrCl2] are significantly higher than those of the reference catalysts. Additional experiments gave some insight into the relationship between polymerization conditions, e.g. the [Al]/[Zr] ratio, temperature or pressure and the key features of the polymers. It was shown that all these parameters influence the melting point and other specific values of the polymer. Additionally, selected examples were tested in the ethene/1-hexene copolymerization. The copolymers have been analyzed using DSC, GPC, IR and NMR spectroscopy. In conclusion, some new products were prepared and analyzed, in many cases with OctafluH (C29H38) as a substituent. All [2]borametallocenophanes are active catalysts in Ziegler-Natta type olefin polymerization processes. Analyses of the produced polymers revealed that [2]borametallocenophanes can produce long-chain polyethylene and ethene/1-hexene copolymers. KW - Anorganische Chemie KW - Homogene Katalyse KW - Ziegler-Natta-Katalysator KW - Metallocene KW - Bor KW - Polyolefine KW - Metallocenophane KW - metallocenophanes Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-44444 ER - TY - THES A1 - Zottnick, Sven Holger T1 - Lumineszierende Lanthanid-Koordinationsverbindungen auf Basis von Cyano- und Spiroborat Salzen und ionischen Flüssigkeiten T1 - Luminescent lanthanide coordination compounds based on cyano- and spiroborate salts and ionic liquids N2 - Im Rahmen dieser Arbeit konnten, ausgehend von Borat-haltigen Salzen und ionischen Flüssigkeiten (ILs) sowie Lanthanid-haltigen Precursoren, 30 neue Komplexe und Koordinationspolymere dargestellt werden. Dazu wurden vielfältige Synthesestrategien verfolgt und angewendet, unter anderem Salzmetathesen in Lösung, Solvothermalsynthesen und Ionothermalsynthesen. Ein Hauptaugenmerk bei der Synthese der Zielverbindungen lag auf deren Eigenschaften, wobei insbesondere die Photolumineszenzeigenschaften der erhaltenen Koordinationsverbindungen untersucht wurden. Als Borat-haltige Liganden wurden sowohl Cyanoborate als auch Oxoborate hinsichtlich ihrer Eignung zum Aufbau neuer Koordinationspolymere untersucht. Als Cyanoborat-haltige Edukte wurden dabei Säuren und ionische Flüssigkeiten mit Dicyano-, Tricyano- und Tetracyanoborat- Anionen eingesetzt, die durch die unterschiedliche Zahl an Cyanogruppen zu vielfältigen Koordinationsverbindungen führen können. Mittels Ionothermalsynthese konnten die Verbindungen 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) sowie [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] dargestellt werden, wobei es zu einer Transformation der ionischen Flüssigkeit [EMIm][B(CN)4] in ein Koordinationspolymer kommt, in dem sowohl Kation als auch Anion der IL beteiligt sind. Dabei ist es bemerkenswerterweise durch die Reaktionstemperatur möglich zu steuern, welches Produkt sich letztlich bildet. Ebenfalls durch Ionothermalsynthese gelang die Synthese von Einkristallen der Verbindung 3∞[La{C2F5B(CN)3}3], durch deren Kenntnis die Verbindungen 3∞[Ln{C2F5B(CN)3}3](Ln = Eu, Ho) als isotype Strukturen identifiziert und hinsichtlich ihrer Lumineszenzeigenschaften charakterisiert werden konnten. Durch Umsetzungen der Lanthanidchloride mit der Säure H[BH2(CN)2] in Solvothermalsynthesen in Pyridin (py) konnten eindimensionale Koordinationspolymere [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) erhalten werden. Unter vergleichbaren Synthesebedingungen aber im Lösungsmittel MeCN beobachtet man hingegen die Bildung von Raumnetzen der Zusammensetzung 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb). Die dreidimensionalen Koordinationspolymere 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) wurden ebenfalls in MeCN synthetisiert, allerdings ausgehend von der Säure [H3O][BH(CN)3]. Die erwähnten Verbindungen zeigen für die spektroskopisch relevanten Vertreter charakteristische Lumineszenz auf Basis von 5d-4f- respektive 4f-4f-Übergängen, die überwiegend auf der direkten Anregung der jeweiligen Lanthanidionen beruht. Mit dem Bis-salicylatoborat-Anion (= BSB−) gelang ausgehend von Na[BSB] und LnCl3 unter solvothermalen Bedingungen in Pyridin die Synthese der eindimensionalen, strangartigen Koordinationspolymere 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) und der zweidimensionalen, schichtartigen Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er). Einblicke über den Mechanismus der Bildung der genannten Verbindungen konnten durch den Komplex [ErCl2(py)4BSB] gewonnen werden, der eine sukzessive Substitution der Chlorid-Liganden nachweist. Die Verbindungen mit dem [BSB]−-Anion zeigen Photolumineszenz, die auf unterschiedliche Prozesse zurückgeführt werden kann. So weist 1∞[Y(BSB)3(py)2] Fluoreszenz auf, die von den [BSB]−-Anionen herrührt, während 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) sowie 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) Lumineszenz auf Basis von 5d-4f- und 4f-4f-Übergängen zeigen, die durch einen Antenneneffekt der koordinierenden [BSB]−-Anionen vergleichsweise intensiv beobachtet werden können. Eine Sonderstellung nehmen hier die Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) ein. Während mit Eu3+ überwiegend direkte Anregung festgestellt werden kann, treten für Ho3+ Reabsorptionsprozesse auf. Durch Kombination unterschiedlicher Gehalte an Eu3+- bzw. Tb3+-Ionen in den eindimensionalen Koordinationspolymeren 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25) können zudem Mischfarben der Lumineszenz erzeugt werden. Mit dem Komplex [B2O(C2O4)2(dmf)2] (dmf = Dimethylformamid) und dem Koordinationspolymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = Phthalatoborat) konnte zudem die Sonderstellung des [BSB]−-Anions deutlich gemacht werden, da es als einziges untersuchtes Spiroborat-Anion vollständig in Zielverbindungen eingebaut werden konnte, während vergleichbare Spiroborat-Anionen wie das [PHB]−-Anion in Gegenwart Lewis-acider Verbindungen hingegen die Abspaltung funktioneller Gruppen zeigten. Insgesamt konnten in dieser Arbeit somit zahlreiche neue, lumineszierende Koordinationspolymere mit Cyano- und Oxoboraten erfolgreich dargestellt werden. N2 - Within the scope of this thesis 30 new complexes and coordination polymers could be synthesized, starting from borate-containing salts and ionic liquids (ILs) as well as lanthanide compounds. Therefore, manifold synthesis strategies were applied, including salt metatheses, solvothermal syntheses and ionothermal syntheses. The main focus within the synthesis of desired products was set on the properties of the compounds, particularly on their photoluminescence behavior. Both cyanoborates and oxoborates were investigated regarding their potential in constructing new coordination polymers. Acids and ionic liquids with dicyano-, tricyano- and tetracyanoborate anions were used, leading to diverse coordination compounds due to their varying number of cyano groups. By applying ionothermal methods, the compounds 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) and [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] could be synthesized from the ionic liquid [EMIm][B(CN)4], showing a transformation of the ionic liquid into a coordination polymer incorporating both cation and anion of the IL. Remarkably, it is possible to control, which of the products is formed by changing the reaction temperature. Single crystals of the compound 3∞[La{C2F5B(CN)3}3] could also be synthesized by ionothermal methods. With the knowledge on the crystal structure, it was possible to identify the compounds 3∞[Ln{C2F5B(CN)3}3] (Ln = Eu, Ho) as isotypic structures, thereby allowing further investigations on their properties, including their luminescence features. By reacting lanthanide chlorides with the acid H[BH2(CN)2] in pyridine (py), one-dimensional coordination polymers [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) could be obtained. Under similar solvothermal conditions, but in MeCN as solvent, the formation of networks of the constitution 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb) is observed instead. The three-dimensional coordination polymers 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) were also synthesized in MeCN, however starting from the acid [H3O][BH(CN)3]. The compounds described show characteristic luminescence for spectroscopically relevant ions, based on 5d- 4f- and 4f-4f-transitions, respectively. Thereby, the observed luminescence is mainly based on a direct excitation of the respective lanthanide ions. With the bis-salicylatoborate-anion (= BSB−), it was possible to synthesize one-dimensional, strand-like coordination polymers 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) as well as twodimensional, sheet-like structures 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er), starting from Na[BSB] and LnCl3 under solvothermal conditions in pyridine. The molecular complex [ErCl2(py)4BSB] allowed further insights into the formation of the described compounds, as it proves a gradual substitution of chloride ligands by [BSB]−-anions. The compounds with the [BSB]−-anion show photoluminescence features ascribed to different processes. 1∞[Y(BSB)3(py)2] shows fluorescence originating from the [BSB]−-anion, while 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) and 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) show luminescence based on 5d-4f- and 4f-4f-transitions. These are quite intense, as an antenna effect of coordinating [BSB]−-anions can be observed. The compounds 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) prove as exceptions, as direct excitation is mainly observed for Eu3+, while Ho3+ shows reabsorption processes. By mixing different contents of Eu3+ and Tb3+ in the one-dimensional coordination polymers 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25), it is possible to create mixed luminescence colors. With the complex [B2O(C2O4)2(dmf)2] (dmf = dimethylformamide) and the coordination polymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = phthalatoborate) the exceptional position of the [BSB]−-anions within the class of spiroborates could be revealed, as it proved as only spiroborate anion within this work, that could be fully incorporated in the desired products. This is benficial to a great extent, as similar spiroborate anions like the [PHB]−-anion tend to loose functional groups in the presence of Lewis-acid compounds. Altogether, it was possible to successfully synthesize numerous luminescent coordination polymers with cyano- and oxoborates in this work. KW - Photolumineszenz KW - Lanthanoide KW - Borate KW - Spiroborate KW - Cyanoborate KW - Koordinationsverbindungen KW - Koordinationspolymere KW - MOFs Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157945 ER - TY - THES A1 - Zell, Thomas T1 - NHC-stabilisierte Nickel-Komplexe in der stöchiometrischen und katalytischen Element-Element-Bindungsaktivierung T1 - NHC-stabilized Nickel Complexes in Stoichiometric and Catalytic Element-Element Bond-Activations N2 - Die vorliegende Arbeit befasst sich mit Untersuchungen von Element-Element- Bindungsaktivierungsreaktionen des dinuklearen Nickel(0)-NHC-Komplex [Ni2(iPr2Im)4(COD)] A mit verschiedenen reaktionsträgen Substraten, die ihrerseits wichtige Ausgangsstoffe für katalytische Anwendungen sind. Die Arbeit gliedert sich dabei in vier verschiedene Teile. N2 - The present work is concerned with investigations of element-element bond activation reactions of the dinuclear NHC-ligated nickel(0)-complex [Ni2(iPr2Im)4(COD)] A with inert substrates, which are themselves important compounds for catalytic transformations. This work is divided into four parts. KW - Heterocyclische Carbene <-N> KW - Nickelkomplexe KW - Chemische Bindung KW - Aktivierung KW - NHC KW - Nickel KW - Bindungsaktivierung KW - Organometallchemie KW - Katalyse KW - NHC KW - Nickel KW - Bond Activation KW - Organometallic Chemistry KW - Catalysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57484 ER - TY - THES A1 - Zarzycki, Bartosz T1 - Element-Element Bindungsaktivierung an [Ni(iPr2Im)2] und [(η5-C5H5)Co(iPr2Im)] T1 - Element-element bond-activation on [Ni(iPr2Im)2] and [(η5-C5H5)Co(iPr2Im)] N2 - Die vorliegende Dissertation behandelt zum einen die mechanistischen Details von Bindungsaktivierungs-Reaktionen an Disauerstoff und weißem Phosphor mit den Komplexfragmenten 1[Ni(iPr2Im)2] und 3[(η5-C5H5)Co(iPr2Im)] und zum anderen die Regioselektivität von oxidativen Insertionsreaktionen des 1[Ni(iPr2Im)2]-Komplexfragments in C–X-Bindungen substituierter Fluoraromaten (X = F, OCH3, CN, H). N2 - The presented thesis deals with the mechanistic details of bond activation reactions of the oxygen molecule and white phosphorus at the reactive complex fragments 1[Ni(iPr2Im)2] and 3[(η5-C5H5)Co(iPr2Im)] and with the regioselectivity of oxidative insertion reactions of the 1[Ni(iPr2Im)2]-fragment into C–X-bonds of functionalized fluorinated derivatives of benzene. KW - Heterocyclische Carbene <-N> KW - Homogene Katalyse KW - Reaktionsmechanismus KW - Theoretische Chemie KW - Weißer Phosphor KW - Cobalt KW - Nickel KW - Metallkomplexe KW - DFT KW - Dichtefunktionalformalismus KW - bonding mechanisms KW - orbital diagram Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-77195 ER - TY - THES A1 - Zapf, Ludwig T1 - Novel Borane- and Phosphorane- Functionalized Anionic Carbene Ligands T1 - Neuartige Boran- und Phosphoran-funktionalisierte anionische Carbenliganden N2 - N-heterocyclic carbenes (NHC) are utilized for the stabilization of reactive compounds, for the activation of strong bonds, and as ligands in transition metal chemistry. In contrast to neutral NHCs, few examples of anionic or even dianionic NHCs are known. One approach for the synthesis of anionic carbenes is the deprotonation of neutral or anionic precursors, bearing Lewis acids instead of alkyl or aryl substituents. Following this strategy, novel anionic and dianionic NHCs, featuring weakly coordinating fluorinated borane and phosphorane substituents or coordinating tricyanoborane substituents were synthesized within the scope of this thesis. These carbenes possess unprecedented stabilities compared to related species. Furthermore, their electronic and steric properties can be directly adjusted by the type of Lewis acid attached. Their potential as ligands with highly shielding weakly coordinating substituents next to the carbene coordination center was demonstrated by the syntheses of the respective NHC selenium adducts and NHC gold(I) complexes. In contrast anionic NHCs with coordinating tricyanoborane moieties have an outstanding potential as ditopic ligands with coordination being possible at the carbene center and via the cyano groups. Their beneficial ligand properties were demonstrated by the syntheses of the respective NHC selenium adducts and NHC nickeltricarbonyl complexes. The combination of electronic properties, the large buried volume, the negative charge, the possibility to act as ditopic or ligands with weakly coordinating groups, and the ease of accessibility render borane- and phosphorane functionalized NHCs unique novel ligands. A further project of this PhD thesis deals with the steric properties of Lewis acids. Therefore, an easy-to-apply model was designed to quantify the steric demand of Lewis acids. Using the results of this evaluation, a second model was developed which judges the steric repulsion in Lewis acid/base adduct formation for arbitrary sets of acids and bases. N2 - N-heterozyklische Carbene (NHC) werden für die Stabilisierung reaktiver Verbindungen, für die Aktivierung starker Bindungen sowie als Liganden in der Übergangsmetallchemie eingesetzt. Im Gegensatz zu neutralen NHCs sind nur sehr wenige Vertreter anionischer oder gar dianionischer NHCs bekannt. Eine gute Strategie für deren Synthese stellt die Deprotonierung neutraler oder anionischer Vorstufen dar, welche Lewis-Säuren an Stelle von Alkyl- oder Arylsubstituenten tragen. Dieser Route folgend, wurden im Rahmen dieser Arbeit neue anionische und dianionische NHCs dargestellt, welche mit schwach koordinierenden, fluorierten Boran- und Phosphoransubstituenten oder mit koordinierenden Tricyanoboraneinheiten funktionalisiert sind. Diese Carbene besitzen beispiellose Stabilitäten, verglichen mit verwandten Verbindungen. Darüber hinaus können deren elektronischen und sterischen Eigenschaften direkt über die Wahl der Lewis-Säure gesteuert werden. Das Potential der Liganden mit stark abschirmenden schwach koordinierenden Substituenten in Nachbarschaft zum Carbenzentrum wurde durch die Synthese von NHC-Selen-Verbindungen sowie NHC-Gold(I)komplexen gezeigt. Im Gegensatz hierzu besitzen anionische NHCs mit koordinierenden Tricyanoboraneinheiten ein herausragendes Potential als ditope Liganden, da eine Koordination sowohl über das Carbenzentrum als auch über die Cyanogruppen möglich ist. Diese Vorteilhaften Ligandeneigenschaften wurden durch die Synthese entsprechender NHC-Selen-Addukte und NHC-Nickeltricarbonylkomplexe gezeigt. Somit macht die Kombination der elektronischen Eigenschaften, des großen verdeckten Volumens, der negativen Ladung, der Möglichkeit als ditoper Ligand oder als Ligand mit schwach koordinierenden Gruppen zu fungieren sowie die einfache Zugänglichkeit Boran- und Phosphoran-funktionalisierte NHCs zu einzigartigen neuartigen Liganden. Ein weiterer Teil dieser Arbeit setzt sich mit dem sterischen Anspruch von Lewis-Säuren auseinander. Hierfür wurde ein einfach anwendbares Modell entworfen, welches diesen quantifiziert. Ausgehend von diesen Ergebnissen wurde ein zweites Modell entwickelt, welches die sterische Abstoßung zwischen Lewis-Säure/Base-Addukten für beliebige Säure/Base-Kombinationen beurteilt. KW - Komplexe KW - Borane KW - Carbene KW - Phosphorane KW - Koordinationsverbindungen KW - Liganden Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-320781 ER - TY - THES A1 - Ye, Qing T1 - Synthesis and Investigation of Borylene Complexes: from Borylene Transfer to Borylene Catenation T1 - Synthese und Untersuchung von Borylenkomplexen: von Borylentransfer zu Borylen-Verkettung N2 - Im Rahmen dieser Arbeit wurde das Spektrum des Borylentransfers ausgeweitet, indem Übergangsmetall Alkinylkomplexe und Metall-Kohlenstoff-Doppelbindungen als Borylen-Akzeptoren eingeschlossen wurden. Neben der Salzeliminierung, Halogenidabstraktion und Dehydrierung, wurde eine neuartige Syntheseroute zu terminalen Borylenkomplexen durch Salz- und Silylhalogenideliminierung etabliert. Mithilfe dieser Strategie gelang die Darstellung von [(OC)3(Me3P)Fe=BDur], ein seltenes Beispiel für einen neutralen Arylborylenkomplex. Im Speziellen hat diese Verbindung ein großes Anwendungspotenzial für Metathesereaktionen und die Funktionalisierung von polycyclischen aromatischen Kohlenwasserstoffen, wie z. B. Naphthalin, gezeigt. Außerdem konnte ein Eisen-Bis(borylen)-Komplex [(OC)3Fe(BDur){BN(SiMe3)2}] durch einen Phosphan-Borylen-Austausch dargestellt werden. Ausgehend von diesem Komplex gelang die Darstellung von 1,4-Diboracyclohexadien bzw. des ersten 1,4-Dibora-1,3-Butadien-Komplexes, wodurch eine neue Art von Borylentransfer etabliert werden konnte. Höchst interessant ist es, dass der Transfer von weiteren Borylen-Einheiten in die Koordinationssphäre des Eisenatoms zu einer kontrollierten Borylen-Verkettung geführt hat. N2 - Within the scope of this thesis, the area of borylene transfer has been broadened by including transition-metal alkynyl complexes and metal-carbon double bonds as borylene acceptors. In addition to double salt elimination, halide abstraction and dehydrogenation processes, a novel high-yield synthetic procedure for terminal borylene complexes was established, i.e. salt elimination and subsequent silylhalogenide liberation. Accordingly, it was possible to prepare [(OC)3(Me3P)Fe=BDur] as a rare example of a neutral arylborylene species. Moreover, this compound has been demonstrated to possess great potential for metathesis reactions and the functionalization of polycyclic aromatic hydrocarbons such as naphthalene. Moreover, it could undergo a phosphine-borylene exchange reaction, yielding the iron bis(borylene) complex [(OC)3Fe(BDur){BN(SiMe3)2}], which has turned out to be applicable for preparation of 1,4-diboracyclohexadiene and unprecedented 1,4-dibora-1,3-butadiene complexes, thus establishing a new type of borylene transfer. Most interestingly, upon transfer of further borylene moieties into the coordination sphere of iron, borylene-catenation was accomplished in a highly controlled manner. KW - Borylene KW - Übergangsmetallkomplexe KW - Borylenkomplexe KW - Bor KW - Photochemie KW - Borheterocyclen KW - Boracumulen KW - Borylene complexes KW - Boron KW - Photochemistry KW - Boraheterocycles KW - Boracumulene Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71443 ER - TY - THES A1 - Würtemberger-Pietsch, Sabrina T1 - Anionic and Neutral Lewis-Base Adducts of Diboron(4) Compounds T1 - Anionische und Neutrale Lewis-Basen Addukte von Diboran(4)-Verbindungen N2 - Anionic Adducts Sp2-sp3 tetraalkoxy diboron compounds have gained attention due to the development of new, synthetically useful catalytic reactions either with or without transition-metals. Lewis-base adducts of the diboron(4) compounds were suggested as possible intermediates in Cu catalyzed borylation reactions some time ago. However, intermolecular adducts of tetraalkoxy diboron compounds have not been studied yet in great detail. In preliminary studies, we have synthesized a series of anionic sp2-sp3 adducts of B2pin2 with alkoxy-groups (L = [OMe]–, [OtBu]–), a phenoxy-group (L = [4-tBuC6H4O]–) and fluoride (L = [F]–, with [nBu4N]+ as the counter ion) as Lewis-bases. Neutral Adducts Since their isolation and characterization, applications of N-heterocyclic carbenes (NHCs) and related molecules, e.g., cyclic alkylaminocarbenes (CAACs) and acyclic diaminocarbenes (aDCs), have grown rapidly. Their use as ligands in homogeneous catalysis and directly in organocatalysis, including recently developed borylation reactions, is now well established. Recently, several examples of ring expansion reactions (RER) involving NHCs were reported to take place at elevated temperatures, involving Be, B, and Si. Furthermore, preliminary studies in the group of Marder et al. showed the presence of neutral sp2-sp3 diboron compounds with B2pin2 and the NHC Cy2Im. In this work, we focused on the synthesis and characterization of further neutral sp2-sp3 as well as sp3-sp3 diboron adducts with B2cat2 and B2neop2 and different NHCs. Whereas the mono-NHC adduct is stable for several hours at temperatures up to 60 °C, the bis-NHC adducts undergo thermally induced rearrangement to form the ring expanded products compound 26 and 27. B2neop2 is much more reactive than B2cat2 giving ring expanded product 29 at room temperature in quantitative yields, demonstrating that NHC ring expansion and B–B bond cleavage can be very facile processes. Whereas the mono-NHC adduct is stable for several hours at temperatures up to 60 °C, the bis-NHC adducts undergo thermally induced rearrangement to form the ring expanded products compound 26 and 27. B2neop2 is much more reactive than B2cat2 giving ring expanded product 29 at room temperature in quantitative yields, demonstrating that NHC ring expansion and B–B bond cleavage can be very facile processes. N2 - Im Rahmen der vorliegenden Arbeit wurde die Synthese und das Reaktionsverhalten Lewis-Säuren/Lewis-Basen-Addukte von Diboran(4)-Verbindungen als Lewis-Säuren untersucht. Als Lewis-Basen dienten zum einem das Fluorid-Ion, zum anderen N-Heterozyklische Carbene. Ein Ziel der vorliegenden Arbeit war somit die Synthese und Charakterisierung anionischer sp2-sp3-Diboran-Verbindungen des Typs [B2(OR)4F][NMe4] (OR2 = Pinakol, Catechol und Neopentyl), die auf ihre Eigenschaft als „Boryl-Übertragungsreagenz“ gegenüber Diazoniumsalzen überprüft wurden. Der zweite Teil der Arbeit untersucht die Reaktion von Diboranen (B2cat2 und B2neop2) mit gesättigten und ungesättigten N-Heterozyklischen Carbenen (NHCs). Die neutralen, einfach- und zweifach-substituierten NHC-Addukte des Typs B2(OR)4•NHC und B2(OR)4•(NHC)2 wurden anschließend auf ihre thermische Stabilität untersucht. Die Ergebnisse dieser Arbeit zeigen zum einem, dass anionische Addukte des Typs [B2(OR)4F][NMe4] 4, 7 und 9 als „Boryl-Übertragungsreagenzien“ eingesetzt werden können. Ferner lassen sich ausgehend von Diboran(4)-Verbindungen durch die Umsetzung mit N Heterozyklischen Carbenen die einfach- und zweifach-substituierten NHC-Addukte B2(OR)4•NHC und B2(OR)4•(NHC)2 synthetisieren. Diese sind zum Teil instabil gegenüber einer Ringerweiterungsreaktion unter Insertion einer Boryleinheit in die C–N-Bindung des Carbens. Untersuchungen an NHC-Addukten von Boranen BR3 und HB(OR)2 zeigen weiterhin, dass die Addukte Ph3B•NHC gegenüber solchen Ringerweiterungen stabil sind. Die Addukte HB(OR)2•NHC sind je nach eingesetztem Carben und Boran entweder stabil oder reagieren unter B–H-Bindungsaktivierung zur Ringerweiterung des Carbens. KW - Addukt KW - Diborane KW - carben KW - Lewis-Base Adducts KW - Diboron(4) Compounds KW - Ring Expansion Reaction Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136321 ER - TY - THES A1 - Würtemberger, Max T1 - Untersuchungen zur Synthese und Reaktivität NHC-substituierter Ruthenium- und Eisen-Komplexe T1 - Investigations of the synthesis and reactivity of NHC substituted ruthenium and iron complexes N2 - Diese Arbeit beschäftigt sich mit Untersuchungen zur Synthese und Reaktivität von Ruthenium(II)- und Eisen(II)-Komplexen welche durch Alkyl-subsituierte N-Heterozyklische-Carben Liganden stabilisiert werden. Ein besonderes Augenmerk liegt hierbei auf dem synthetischen Zugang von Rutheniumverbindungen jenseits der Metathese-Katalysatoren. N2 - This Work is concerned with the inverstigations of the synthesis and reactivity of ruthenium(II) and iron(II) complexes which are sabilised by alkyl-substituted N-heterocyclic carbenes ligands. Particular attention is paid to the synthetic approach towards ruthenium compounds beyond metathesis catalysts. KW - Rutheniumkomplexe KW - Eisenkomplexe KW - Heterocyclische Carbene <-N> KW - Carbenkomplexe KW - Ruthenium KW - Eisen KW - Carben-Komplexe KW - NHC-Komplexe KW - Ruthenium KW - Iron KW - carbene complexes KW - NHC complexes Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72032 ER - TY - THES A1 - Wu, Zhu T1 - Room Temperature Phosphorescence (RTP): Experimental And Theoretical Studies on Boron-Containing Materials T1 - Raumtemperaturphosphoreszenz (RTP): Experimentelle und theoretische Studien zu borhaltigen Materialien N2 - Persistent room temperature phosphorescent (RTP) luminophores have gained remarkable interest recently for a number of applications in security printing, OLEDs, optical storage, time-gated biological imaging and oxygen sensors. We report the first persistent RTP with lifetimes up to 0.5 s from simple triarylboranes which have no lone pairs. We also have prepared 3 isomeric (o, m, p-bromophenyl)-bis(2,6-dimethylphenyl)boranes. Among the 3 isomers (o-, m- and p-BrTAB) synthesized, the ortho-one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. At last, we checked the RTP properties from the boric acid. We found that the pure boric acid does not show RTP in the solid state. N2 - In letzter Zeit haben Luminophore, die eine effiziente Raumtemperatur-Phosphoreszenz (RTP) zeigen, aufgrund ihrer zahlreichen Anwendungen enormes Interesse gefunden. Die meisten phosphoreszierenden Materialien leiten sich jedoch von Übergangsmetallkomplexen ab, da ihr intrinsisches schnelles Intersystem Crossing (ISC) durch die starke Spin Bahn Kopplung (SOC) des Schwermetalls induziert wird. Metallfreie RTP Materialien sind selten und haben sich zu einem vielversprechenden Gebiet entwickelt, da sie kostengünstig und umweltfreundlich sind. Dieses Kapitel fasst organische molekulare Materialien mit langen Triplett Lebensdauern bei Raumtemperatur aus der Perspektive zusammen, ob sie aus einem molekularen oder Mehrkomponentensystem stammen. Bei rein organischen phosphoreszierenden Materialien werden üblicherweise Heteroatome in das Rückgrat eingeführt, um die Singulett Triplett ISC Geschwindigkeitskonstante zu erhöhen. In Mehrkomponentensystemen wird durch nützliche Strategien wie Wirt-Gast, Polymermatrix, Copolymerisation und supramolekulare Anordnung eine starre Matrixanordnung erreicht, durch die nichtstrahlende Pfade eingeschränkt und so ultralange RTP realisiert wird. ... KW - room temperature phosphorescence Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260844 ER - TY - THES A1 - Wirthensohn, Raphael Sebastian T1 - Metallvermittelte Perfluoralkylierungen und die elektrochemische Fluorierung zu Perfluoralkylverbindungen T1 - Metal-mediated perfluoroalkylations and the electrochemical fluorination to perfluoroalkyl compounds N2 - Diese Arbeit beschäftigt sich mit der Synthese und Charakterisierung von mehrfach perfluoralkylierten Verbindungen. Das erste Kapitel behandelt die Kupfer-vermittelte mehrfache Pentafluorethylierung von aromatischen Systemen, sowie die Untersuchung deren Folgechemie. Dabei wurden iodierte Aryl-Derivate mit dem Kupferorganyl CuC2F5 umgesetzt. Mit dieser Methode konnten symmetrisch und unsymmetrisch pentafluorethylierte Anilin- und Phenol-Derivate dargestellt werden. Die Anilin-Derivate wurden zu den entsprechenden Diazoniumsalzen umgesetzt, welche zunächst vollständig charakterisiert und anschließend deren Folgechemie untersucht wurde. Das zweite Kapitel behandelt die Darstellung von Bis(trifluormethyl)sulfon durch elektrochemische Fluorierung mittels des Simons-Prozesses. Dabei wurde der Umsatz der Reaktion durch Verwendung der teilfluorierten Verbindung (Trifluormethyl)methylsulfon als Startmaterial optimiert. N2 - Within this thesis multiple perfluoroalkylated compounds were synthesized and characterized. The first chapter deals with the copper-mediated multiple pentafluoroethylation of aromatic systems, and the investigation of their further reactivity. In this work, iodinated aryl derivatives were reacted with the copper organyl CuC2F5. Symmetrically and asymmetrically pentafluoroethylated aniline and phenol derivatives were prepared via this method. The aniline derivatives were reacted to give the corresponding diazonium salts, which were first fully characterized and then their further reactivities were investigated. The second chapter deals with the preparation of bis(trifluoromethyl)sulfone by electrochemical fluorination using the Simons process. Here, the conversion of the reaction was optimized by using the partially fluorinated compound (trifluoromethyl)methyl sulfone as starting material. KW - Perfluoralkylierung KW - Diazoniumverbindungen KW - Fluorierung KW - elektrochemische Fluorierung KW - Diazoniumsalze KW - Pentafluorethylierung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-286640 ER - TY - THES A1 - Winner, Lena T1 - Synthese und Reaktivität neuer Iminoborane T1 - Synthesis and Reactivity of novel Iminoboranes N2 - Im Rahmen dieser Arbeit konnte der erste metallfreie, an Raumtemperatur ablaufende Wasserstofftransfer von Amminboran (NH3BH3) auf Iminoborane durchgeführt werden. Bei der Umsetzung von NH3BH3 mit Di tert butyliminoboran XXIIIa wurde die Bildung des hydrierten Iminoborans 1 beobachtet. DFT Rechnungen belegen einen konzertierten H+/H- Transfer von NH3BH3 mit einer Aktivierungsenergie weit unter der vergleichbarer Wasserstoffübertragungsreaktionen. Da trotz zahlreicher Versuche keine geeigneten Einkristalle von 1 für eine strukturelle Charakterisierung erhalten werden konnten, wurde 1 mit IPr bzw. etherischer HCl umgesetzt, wobei das Addukt 2 bzw. das 1,2 Additionsprodukt 3 isoliert und vollständig charakterisiert werden konnte. Darüber hinaus konnten weitere sterisch anspruchsvolle disubstituierte Amminborane dargestellt werden, die ebenfalls die Fähigkeit besitzen, das Di tert butyliminoboran XXIIIa zu hydrieren. Dafür wurden die Arylamminborane (Aryl = Dur (4) & Tip (5)) dargestellt und mit XXIIIa umgesetzt. Hierbei bildeten sich neben 1 die entsprechenden Arylaminoborane 6 und 7. Ein weiteres Ziel war die Synthese neuartiger Iminoborane. Dafür wurden zwei ferrocenylsubstituierte Aminoboranpräkursoren dargestellt (Schema 53). Über eine Chlorsilan Eliminierung sollte aus Verbindung 8 das entsprechende Iminoboran 9 synthetisiert werden. Jedoch zeigten sich in 11B NMR spektroskopischen Untersuchungen nur Zersetzungsprodukte. Des Weiteren wurde versucht, eine HCl Abstraktion mit Hilfe von verschiedenen Abstrahierungs-Reagenzien, ausgehend von dem Aminoboranpräkursor 10, zu initiieren. Diesbezüglich wird 10 mit diversen Substraten (Na[BAr4F], Na[BAr4Cl], NaH, LiTmp und Na[HMDS]) umgesetzt, wobei sich allerdings für keine der eingesetzten Reagenzien die gewünschte HCl Eliminierung zeigte. Ferner wurde der Aminoboranpräkursor 1,4-Bis{[tert-butyl(trimethylsilyl)amino]-chlorboranyl}durylen 14 erfolgreich dargestellt. Allerdings verlief die Chlorsilan-Eliminierung zu dem Bis-(tert-butylimino)durylenboran 15 im Pyrolyseofen erfolglos. Weitere Syntheseversuche der Aminoborane 16, 17 und 19 als Präkursoren für das (tert-Butylimino) tris bzw. bis (trifluormethyl)phenylboran führten nicht zum gewünschten Ziel (Abbildung 29). Die Bildung dieser Aminoborane läuft unselektiv ab und es werden erhebliche Mengen unerwünschter Nebenprodukte beobachtet. Daher können keine analysenreinen Endprodukte isoliert werden. Im Gegensatz dazu gelang die Darstellung des CF3 meta substituierten Präkursors 21. Durch anschließende Chlorsilan-Eliminierung konnte das (tert Butylimino) 3,5 bis(trifluormethyl)phenylboran 22 isoliert werden. Als Oligomerisierungsprodukt von 22 wurde das Dewar Borazin-Derivat 23 nachgewiesen. Weiterhin wurde der Aminoboranpräkursor Trietylphenyl[tert-butyl(trimethylsilyl)amino]chlorboran 24 erfolgreich dargestellt (Schema 56). Nach anschließender Chlorsilaneliminierung im Pyrolyseofen konnte die Bildung des (tert Butylimino)-2,4,6-triethylphenylborans 25 beobachtet werden. Durch Erwärmen von 24 für zwei Stunden auf 100 °C wurde das Dimerisierungsprodukt 26 detektiert. Die Umsetzung des Iminoborans 25 mit cAAC lieferte bei tiefen Temperaturen das Addukt 28. Erwärmen des Reaktionsgemisches auf Raumtemperatur führte zur Bildung des Cyclopropan Intermediats 30. Ferner ergab das Erhitzen auf 50 °C unter intramolekularem Ringschluss das bicyclische 1,2-Azaborolidin 31. Außerdem wurde das Azaborinin 27 über eine metallkatalysierte Syntheseroute, ausgehend von dem Iminoboran 25 und dem Rhodiumkatalysator [{RhCl(PiPr3)2}2] LXV, unter Acetylenatmosphäre dargestellt. Angesichts weiterer Reaktivitätsstudien von Iminoboranen gegenüber Lewissäuren, wurde das Di tert butyliminoboran XXIIIa mit Tris(pentafluorphenyl)boran umgesetzt (Schema 59). Bei der Reaktion findet eine Carboborierung statt; demgemäß handelt es sich um eine 1,2 Addition des Borans an das Iminoboran unter Bor-Kohlenstoff Bindungspaltung. DFT Rechnungen zufolge beträgt die freie Energie der Reaktion -17.4 kcal mol-1 und läuft damit exergonisch ab. Des Weiteren konnte mit dem NHC IDip (1,3-Bis(2,6-diisopropylphenyl)imidazol-2-yliden) in Reaktivitätsstudien mit (tert Butylimino)mesitylboran XXIIIb die Bildung des Aminoborans 34 beobachtet werden. Dieses entsteht durch die Migration eines Dipp Restes des NHC´s zum Stickstoffatom des vormaligen Iminoborans. Dieser Reaktionstyp stellt ein neues Beispiel für die Reaktivität zwischen Iminoboranen und NHCs im Gegensatz zu klassischen Adduktformationen dar. Einen weiteren neuartigen Beitrag zur Iminoboranchemie lieferte die Reaktion von Di tert butyliminoboran XXXII und dem von Tacke et al. entwickelten Bis(amidinato)silylen XCVI. Bei dem Reaktionsprodukt handelt es sich um eine bicyclische Silaiminboranstruktur, welche aus der Insertion von XCVI in die BN Dreifachbindung des Iminoborans hervorgeht. DFT Rechnungen bestätigen eine exergonische Reaktion mit einer Gesamtenergie von -28.4 kcal mol-1. Eine Insertion in eine Bor-Stickstoff-Dreifachbindung ist unter den Reaktivitätsstudien mit Iminoboranen ein seltener Reaktionstyp. Überdies wurde die Reaktion zwischen dem Pentafluorphenyl-(tert-butyl)iminoboran (XCVII) und PiPr3 beobachtet. Dabei fand formal eine CH Aktivierung der drei Isopropyleinheiten von PiPr3 mit den Boratomen von drei XCVII-Einheiten statt. Zusätzlich bindet ein Sauerstoff an das Phosphoratom. Die Ursache dieser Beobachtung und der Mechanismus dieser Reaktion ist bislang nicht geklärt. N2 - Within the scope of this work, the first spontaneous, metal-free, room temperature hydrogen transfer from ammonia-borane to iminoborane can be pointed out. When di tert butyliminoborane XXIIIa was reacted with NH3BH3 the formation of 1 could be revealed (Scheme 1). DFT-calculations of the mechanism indicate a concerted transfer of H+ and H– with an activation energy far below those of comparable concerted transfer hydrogenations.[126-129] However, because of several attempts to crystallise 1 failed, 1 was reacted with IPr and HCl, respectively to yield compound 2 and 3, which were fully characterised (Scheme 1). Beyond that, the sterically more demanding arylamineboranes (aryl = dur (4) & tip (5)) were synthesised and it could be shown that these compounds were also able to hydrogenate di-tert-butyliminoborane XXIIIa (Scheme 2). Therefore, the reaction of 4 and 5 with XXIIIa yielded not only compound 1, but also the corresponding arylaminoboranes 6 and 7. A further goal was the synthesis of novel iminoboranes. Therefore, the two ferrocenyl substituted aminoborane precursors were synthesised (Scheme 3). The chlorosilane elimination should lead to the iminoborane 9 starting from compound 8. Unfortunately, 11B NMR spectroscopic investigations showed only decomposition products. Furthermore, the aminoborane precursor 10 was treated with different substrates (NaBAr4F, NaBAr4Cl, NaH, LiTmp und NaHMDS) to eliminate HCl and to achieve compound 9. Unfortunately, no HCl elimination took place. Moreover, the aminoborane precursor 1,4-bis{[tert-butyl(trimethylsilyl)amino]-chloroboranyl}durylene 14 was synthesised successfully. However, the chlorosilane elimination to the 1,4-bis-(tert-butylimino)durylenborane 15 in the pyrolysis oven was unsuccessful (Scheme 4). Further attempts to synthesise 16, 17 and 19 as precursors for the (tert-butylimino) tris or bis (trifluoromethyl)phenylborane did not lead to the desired iminoborane through halogensilane elimination (Figure 1). The formation of these aminoboranes proceed unselectively and the formation of undesired by products can be observed. For that reason, no pure products could be isolated. In contrast, the synthesis of the CF3 meta substituted precursor 21 (Scheme 5) was successful. Further, the chlorosilane elimination led to the (tert butylimino)-3,5 bis(trifluormethyl)-phenylborane 22 which could be isolated. The oligomerisation product turned out to be the trimerisation product Dewar borazine derivative 23 (Scheme 5). Furthermore, the aminoborane precursor triethylphenyl[tert-butyl(trimethylsilyl)amino]-chloroborane 24 was synthesised (Scheme 6). The following chlorosilane elimination in the pyrolysis oven led to the formation of the (tert butylimino)-2,4,6-triethylphenylborane 25. After warming compound 24 for two hours at 100 °C the dimerisation product 26 was detected (Scheme 6). The reaction of the novel iminoborane 25 with cAAC at low temperature provided the adduct 28. Warming the reaction mixture to room temperature led to the formation of the cyclopropanintermediate 30. Further, the heating of 30 to 50 °C gave the bicyclic 1,2 azaborilidine compound 31 (Schema 57). In addition, the azaborinine 27 could be synthesised utilizing a [2+2]/[2+4] cycloaddition reaction of the iminoborane 25 with acetylene in the presence of the rhodium catalyst [{RhCl(PiPr3)2}2] (LXV) (Scheme 8). Considering further reactivity studies of iminoboranes towards a Lewis acid, di tert butyliminoborane XXIIIa was reacted with tris(pentafluorophenyl)borane (Scheme 9). Thus, a carboboration took place, a 1,2 addition of the borane to the iminoborane with a BC bond cleavage. DFT calculations showed a total energy of the reaction of 17.4 kcal mol1, which implies an exergonic reaction. Besides, the reaction of the NHC, IDip (1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene) with (tert Butylimino)mesitylborane XXIIIb yielded the aminoborane 34, through a shift of one carbene-bound dipp substituent to the iminoborane nitrogen atom of the former iminoborane (Scheme 10). This reaction is another example of an unexpected reactivity of iminoboranes and is in contrast with classical adduct formation. An additional contribution to the iminoborane chemistry is the reaction of di tert butyliminoborane XXXII with the bis(amidinato)silicon(II) XCVI of the Tacke group (Scheme 11). The reaction gives a bicyclic silaimineborane structure, which was formed through an insertion of XCVI in the BN triple bound of the iminoborane. DFT calculations confirm an exergonic reaction with a total free energy of -28.4 kcal mol-1. The insertion in the B-N bond of iminoboranes are very rare, which makes this type of reaction very interesting. Moreover, the reaction of (pentafluorophenyl)-tert-butyliminoborane XCVII and PiPr3 was observed. In this reaction a formal CH activation of the three isopropyl units of PiPr3 with the boron atoms of three XCVII units took place. Additionally an oxygen binds at the phosphorus atom. The reason of this observation and the mechanism of this reaction is not yet clear. KW - Bor KW - Iminoboran KW - Mehrfachbindung KW - Heterocyclische Carbene <-N> KW - Reaktivität KW - NHC KW - cAAC Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-169169 ER - TY - THES A1 - Werner, Anne T1 - Beiträge zu makromolekularen Kontrastmitteln für die Magnetresonanztomographie T1 - Contributions to the synthesis of macromolecular contrast agents for magnetic resonance imaging N2 - Die vorliegende Arbeit beschäftigt sich mit der Synthese heptadentater Ligandsysteme für die Magnetresonanztomographie. Neben der Synthese von Gadolinium- und Mangankomplexen stand die Entwicklung makromolekularer Kontrastmittel auf Dendrimerbasis im Mittelpunkt dieser Arbeit. N2 - This thesis deals with the synthesis of heptadentate ligand systems for magnetic resonance imaging. In addition to synthesizing gadolinium and manganese complexes, the development of macromolecular contrast agents based on dendrimers was the main goal of this work. KW - NMR-Tomographie KW - Kontrastmittel KW - Gadolinium KW - Mangan KW - magnetic resonance imaging KW - contrast agent KW - gadolinium KW - manganese Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56331 ER - TY - THES A1 - Wennemann, Benedikt T1 - Untersuchungen zur Synthese und Reaktivität von Übergangsmetallborylenkomplexen der Gruppe 8 T1 - Synthesis and reactivity of group 8 borylene complexes N2 - Zusammenfassung Die vorliegende Arbeit wurde in drei Teilbereiche untergliedert. Der erste Teil beschäftigte sich mit der Untersuchung des anionischen Systems K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) und dessen Reaktivität gegenüber Dihalogenboranen. Der zweite Teil widmete sich der Untersuchung der Reaktivät des Eisenbis(borylen)komplexes 45 gegenüber verschiedenen Lewis-Basen und Lewis-Säuren. Im letzten Teil der Arbeit wurde die Insertion von Metallfragmenten der Übergangsmetalle der Gruppe 8 in die M=B-Doppelbindung des Borylenkomplexes 28 untersucht. Durch Umsetzungen der anionischen Osmiumverbindung 64 mit Cl2BDur und Br2BDur konnten die Borylkomplexe 67 und 68 erhalten werden (SCHEMA 56). Die Untersuchungen zum sterischen Einfluss des Silylsubstituenten zeigten, dass die Osmiumkomplexe 65 und 66 mit SiEt3- bzw. SiPh3-Substituenten in die entsprechenden Borylkomplexe überführt werden können, wobei diese Spezies nicht analysenrein isoliert werden konnten. Der Borylkomplex 68 konnte nachfolgend weder unter thermischen Bedingungen, noch unter Verwendung der Lewis-Base Pyridin bzw. des Halogenabstraktionsmittels Na[BArCl4] in einen terminalen Osmiumborylenkomplex umgewandelt werden (Schema 57). Anfängliche Studien zur Reaktivität der anionischen Rutheniumverbindungen 81-83 gegenüber Dihalogenboranen haben sich auf den sterischen Einfluss der borgebundenen Arylsubstituenten konzentriert. Hierdurch konnte gezeigt werden, dass eine Ph-Substitution keine ausreichende Stabilisierung der entstehenden Borylkomplexe liefert. Im Gegensatz dazu erwies sich der sterische Anspruch von Duryl- und Mesitylsubsituenten als ideal für die Bildung stabiler Borylkomplexe, wohingegen die sterische Überfrachtung der Supermesityl- und Terphenylsubstituenten eine Salzeliminierungsreaktion von vornherein verhindert. Der Einfluss des Halogensubstituenten in X2BDur (X = Cl, Br) wurde anhand der Reaktivität gegenüber 81 näher untersucht. In beiden Fällen konnten die entsprechenden Borylkomplexe 84 und 85 isoliert und charakterisiert werden. Da bei der Umsetzung mit Br2BDur auch noch weitere Produkte zu erkennen waren, wurde der sterische Einfluss des Silylsubstituenten in 82 und 83 auf die Produktverteilung bei Reaktion mit Br2BDur untersucht. Es hat sich gezeigt, dass die Wahl der Reaktionsbedingungen einen starken Einfluss auf den Reaktionsverlauf ausübt. So konnte durch regelmäßiges Entgasen der Reaktionslösung der Rutheniumborylenkomplex 86 erhalten werden, während eine thermische Reaktionsführung unter CO-Atmosphäre selektiv zu einer Silylboraneliminierung führte, dessen Produkt indirekt über die Bildung von [(OC)4Ru(PMe3)] (75) nachgewiesen werden konnte (Schema 59). Während die Umsetzung der analogen Eisenspezies K[(OC)3Fe(PMe3)(SiEt3)] (92) mit Cl2BDur lediglich zu Zersetzung führte, konnte im Verlauf der Reaktion mit Br2BDur eine neue, sehr interessante Reaktivität beobachtet werden. Hier war die Salzeliminierungsreaktion mit einer Alkylboraneliminierung verbunden, wobei der intermediär entstehende Silylenkomplex (95) in situ zum dinuklearen, zweifach-verbrückten Bis(silylen)komplex 94 dimerisierte (SCHEMA 60). Unter photolytischen Bedingungen konnte 94 weiter in den dreifach-verbrückten Bis(silylen)komplex 96 überführt werden, welcher den ersten strukturell charaktersierten Komplex dieser Art darstellt. In SCHEMA 61 sind alle relevanten Reaktivitäten des Systems K[(OC)3M(PMe3)(SiR3)] gegenüber X2BDur (X = Cl, Br) zusammen mit den Ergebnissen vorangegangener Arbeiten in einer Übersicht dargestellt. Der zweite Teil dieser Arbeit beschäftigte sich mit der Reaktivität des Eisenbis(borylen)komplexes [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Zunächst wurde 45 mit verschiedenen Lewis-Basen umgesetzt. Während die Umsetzungen mit verschiedenen NHCs (IMe, IMes, IDipp) nur zu Zersetzung führte, konnte durch die Reaktion mit cAACMe der außergewöhnliche Komplex 98 isoliert und vollständig charakterisiert werden (SCHEMA 62). Dieser stellt das erste Beispiel für eine intramolekulare Spaltung eines Carbonylliganden in einem einkernigen Komplex dar. Anschließend wurde die Reaktivität von 45 gegenüber den Lewis-Säuren BBr3, AlBr3 und GaBr3 untersucht. Während die Umsetzung von 45 mit AlBr3 lediglich zu Zersetzung führte, konnte mit GaBr3 als Hauptprodukt Br2BDur nachgewiesen werden. In einem möglichen Reaktionsmechanismus ist die Reaktion mit einer 1,2-Addition des GaBr3 unter Bildung eines Gallylkomplexes verbunden, welcher nach Abspaltung von Br2BDur in einen instabilen Gallylenkomplex übergeht (SCHEMA 63). Die Umsetzung von 45 mit BBr3 lieferte bei tiefen Temperaturen den zweikernigen Tris(borylen)komplex 100 (SCHEMA 64), welcher ein Analogon des wohlbekannten Fe2(CO)9 darstellt. Das abschließende Kapitel dieser Arbeit befasste sich mit der Insertion von Metallfragmenten der Gruppe 8-Übergangsmetalle in die M=B-Doppelbindung von [(OC)5Mo=BN(SiMe3)2] (28). Während bei den Umsetzungen von 28 mit [(OC)4Fe(PMe3)] (90) und [(OC)4Ru(PMe3)] (75) die MOLPs 104 und 105 nur NMR-spektroskopisch nachgewiesen werden konnten, war die Isolierung des MOLPs 103 sowie dessen strukturelle Charakterisierung möglich (SCHEMA 65). Bemerkenswert ist hierbei, dass die Reaktion sowohl unter thermischen als auch unter photolytischen Bedingungen durchgeführt werden kann. N2 - Summary The first part of this work focused on the development of a new route to neutral terminal group 8 transition metal borylene complexes. Thus, the reactivity of the anionic system K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) towards dihaloboranes was studied in detail. The second part of this work dealt with the reactivity studies of the iron bis(borylene) complex 45 towards common lewis bases and acids. The final part of this work concentrated on the insertion of group 8 transition metal fragments into the M=B double bond of the molybdenum borylene complex 28. The reaction of the anionic osmium complex 64 with X2BDur (X = Cl, Br) resulted in the formation of the osmium boryl complexes 67 and 68 (SCHEME 1). Studies concerning the steric influence of the silyl substituent showed that the osmium species 65 and 66 containing SiEt3 and SiPh3 groups can also be converted into the respective boryl complexes, while the resulting products could not be isolated. All attempts to convert the osmium boryl complex 68 into an osmium borylene complex, either under thermal conditions or by reaction with lewis bases and halide abstracting reagents, consistently failed (SCHEME 2). Initial studies on the reactivity of the anionic ruthenium complexes 81-83 towards dihaloboranes focused on the steric influence of the aryl ligand on boron. The results clearly showed that the small phenyl substituent is not able to efficiently stabilize the resulting boryl complexes. By contrast, the steric demand of the mesityl and duryl ligands appeared to be sufficient to afford stable boryl complexes, while supermesityl and terphenyl substituents were sterically too encumbered even for the initial salt elimination step (SCHEME 3). The influence of the halide substituents in X2BDur (X = Cl, Br) was evaluated by reactivity studies towards 81. In both cases, boryl complexes 84 and 85 could be isolated and fully characterized. However, reaction of 81 with Br2BDur suggested the formation of additional products, for which reason the steric influence of the silyl substituents in 81 and 82 on the nature of the products was studied in detail. It turned out that the reaction conditions have a strong influence on the observed pathways. Thus, periodical degassing favoured the formation of the neutral terminal ruthenium borylene complex 86, while thermal treatment under an atmosphere of CO led to silyl borane elimination (SCHEME 4). While the reaction of the analogous iron species K[(OC)3Fe(PMe3)(SiEt3)] (92) with Cl2BDur resulted in decomposition, reaction with Br2BDur uncovered a new, highly interesting reactivity pattern. Here, initial salt elimination was followed by alkyl borane elimination step while the in situ generated silylene complex readily dimerized to form the dinuclear bis(silylene) complex 94 (SCHEME 5). Photolysis of 94 in solution subsequently converted 94 into the triply-bridged dinuclear complex 96, which is the first structurally characterized example of this class of compounds. The second part of this work focused on the reactivity of the iron bis(borylene) complex [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Intitally, 45 was reacted with different lewis bases. While reaction with NHCs (IMe, IMes, IDipp) only resulted in decomposition, reaction with cAACMe enabled the isolation of the uncommon complex 98 (SCHEME 7), which represents the first example of an intramolecular carbonyl cleavage in a mononuclear complex. Next, the reactivity of 45 towards lewis acids BBr3, AlBr3 and GaBr3 was studied. While reaction of 45 with AlBr3 was accompanied by decomposition, reaction with GaBr3 selectively afforded Br2BDur as the main product. A plausible mechanism involves the 1,2-addition of GaBr3 to afford a gallyl species, which subsequently eliminates Br2BDur to generate a labile gallylene complex (SCHEME 8). At low temperatures, the reaction of 45 with BBr3 resulted in the formation of the dinuclear tris(borylene)complex 100 (SCHEME 9), which can be considered an analogue of the well-known [Fe2(CO)9]. The final part of this work was concerned with the insertion of group 8 transition metal fragments into the M=B-double bond of [(OC)5Mo=BN(SiMe3)2] (28). While the reaction of 28 with [(OC)4Fe(PMe3)] (90) and [(OC)4Ru(PMe3)] (75) afforded the MOLPs 104 and 105, which could only be identified by NMR-spectroscopy, the isolation and structural characterization of the MOLP product 103 of the reaction with [(OC)4Os(PMe3)] (59) was feasible (SCHEME 10). Remarkably, this reaction can be carried out both under thermal and photolytic conditions. KW - Borylgruppe KW - Borylenkomplexe KW - Borylkomplexe KW - Übergangsmetallkomplexe Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130755 ER - TY - THES A1 - Weiß, Jörg T1 - Beiträge zur Chemie des höherkoordinierten Siliciums: Synthese, Struktur und Eigenschaften neuer penta- und hexakoordinierter Silicium(IV)-Komplexe T1 - Contributions to the Chemistry of Higher Coordinate Silicon: Syntheses, Structures and Properties of Novel Penta- and Hexacoordinate Silicon(IV) Complexes N2 - Die vorliegende Dissertation stellt einen Beitrag zur Chemie des höherkoordinierten Siliciums dar. Im Rahmen dieser Untersuchungen wurden neue neutrale penta- und hexakoordinierte Silicium(IV)-Komplexe, sowie deren benötigte Vorstufen dargestellt. Weiterhin wurde ein kationischer und ein zwitterionischer Silicium(IV)-Kompex synthetisiert. Die Charakterisierung dieser Verbindungen erfolgte durch Elementaranalysen, Festkörper-NMR-Spektroskopie (13C-, 15N-, 29Si- und 77Se-VACP/MAS-NMR) und Kristallstrukturanalysen. Ergänzend wurden einige Verbindungen durch NMR-Spektroskopie in Lösung (1H, 13C, 19F, 29Si, und 77Se) charakterisiert. N2 - This dissertation deals with the chemistry of higher-coordinate silicon. In the course of these studies, novel neutral penta- and hexacoordinate silicon(IV) complexes and the needed precursors were prepared. Furthermore, one kationic and one zwitterionic silicon(IV) complex was synthesized. These compounds were characterized by elemental analyses, solid-state NMR spectroscopy (13C, 15N, 29Si, and 77Se VACP/MAS NMR), and single-crystal X-ray diffraction. In addition, some of these compounds were characterized by NMR spectroscopy in solution (1H, 13C, 19F, 29Si, and 77Se). KW - Hypervalentes Molekül KW - Silicat Coordination Chemistry KW - Siliciumkomplexe KW - Chemische Synthese KW - Silicate KW - higher-coordinate KW - Pentacoordination KW - Hexacoordination KW - Höherkoordination KW - Koordinationschemie KW - Selen KW - Silicium KW - Siliciumkomplexe KW - Zwitterion KW - Koordinationslehre Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-93250 ER - TY - THES A1 - Weismann, Julia T1 - Methandiid-basierte Cabenkomplexe: Von ihrer Synthese und elektronischen Struktur zur Anwendung in Bindungsaktivierungsreaktionen und katalytischen Umsetzungen T1 - Methandiide based carbene complexes: from their Synthesis and electronic structure to their application in bond activation reactions and catalytic transformations. N2 - Die vorliegende Arbeit beschäftigt sich mit der Anwendung des Sulfonyl-stabilisierten Methandiids 20-Li2 als Ligand in Übergangsmetallkomplexen. Dabei konnte 20-Li2 mit ver-schiedenen Übergangsmetallhalogeniden in Salzmetathesereaktionen umgesetzt werden. Insgesamt wiesen die synthetisierten Methandiid-basierten Komplexe flexible Bindungsverhältnisse bezüglich der MC-Bindung und unterschiedliche Koordinationsmodi der Sulfonyl-Gruppe auf, die die Stabilität und Reaktivität der Komplexe signifikant beeinflussten. In Abhängigkeit von der chemischen Natur des Metallfragmentes und der Co Liganden konnten Carbenkomplexe mit einer ylidischen M-C-Wechselwirkung (A) und solche mit einer echten M=C-Doppelbindung (B) zugänglich gemacht werden. Dabei gelang die Etablierung einer Vielzahl an neuen Komplexen sowohl mit frühen (Zirkonium) als auch späten (Palladium, Ruthenium, Iridium) Übergangsmetallen. Die synthetisierten Verbindungen zeigten dabei unterschiedliche strukturelle und elektronische Eigenschaften, was zu deren Unterteilung in die zwei Komplexklassen A und B führte. So konnte bei der Umsetzung von Methandiid 20-Li2 mit Zirkonocendichlorid die selektive Bildung des Zirkonocenkomplexes 50 beobachtet werden, bei dem NMR spektroskopische (z.B. Hochfeldverschiebung des 13C NMR-Signals des Carben-Kohlenstoffatoms) und röntgenstrukturanalytische (z.B. Pyramidalisierung des „Carben“-Kohlenstoffatoms) Untersuchungen erste Hinweise darauf lieferten, dass sich 50 nicht als Carbenkomplex mit einer Zr=C-Doppelbindung beschreiben lässt. Dies konnte durch quantenchemische Rechnungen bestätigt werden, wobei die „Natural Bond Orbital“-Analyse (NBO-Analyse) eine deutliche negative Ladung am zentralen Kohlenstoffatom (qc = 1.42) und somit dessen nukleophilen Charakter aufdeckte. Zusätzlich lieferten die Rechnungen eine deutlich positive Ladung am Zirkoniumatom (qZr = 1.35), weshalb die Zr-C-Interaktion in 50 am besten mit einer ylidischen Wechselwirkung beschrieben wird. Ähnliche Resultate konnten auch bei den aus den Umsetzungen von 20-Li2 mit [(PPh3)2PdCl2] bzw. [(PPh3)3RuCl2] erhaltenen Komplexen 51a bzw. 52-Int beobachtet werden. Wie für Verbindung 50 ergab die NBO-Analyse von 51a bzw. 52-Int zwar eine  Bindung zwischen Metall- und Kohlenstoffatom, interessanterweise aber keine  Wechselwirkung. Aufbauend auf der elektronischen Struktur von 51a bzw. 52-Int zeichnen sich die beiden Komplexe durch eine hohe Instabilität und Reaktivität aus. Dabei bildete 51a in Lösung diverse Zersetzungsprodukte, während der Ruthenium-Carbenkomplex 52-Int selektiv die Phenylgruppe des Sulfonyl-Substituentens in ortho Position unter Ausbildung der cyclometallierten Spezies 52 intramolekular deprotonierte. Das Cyclometallierungsprodukt 52 konnte in einer Ausbeute von 62% isoliert und vollständig charakterisiert werden. Die schwache -Interaktion zwischen Metall- und Kohlenstoffatom konnte im Falle der Palladium- und Rutheniumkomplexe auf den Elektronenreichtum der späten Übergangsmetalle zurückgeführt werden, welcher durch die guten  Donor- und schlechten  Akzeptoreigenschaften der Phosphan-Liganden zusätzlich verstärkt wurde. Durch Austausch der Triphenylphosphan-Liganden in der Rutheniumdichlorid-Vorstufe gegen das Aren p-Cymol konnte die elektronische Natur am Metallfragment derartig beeinflusst werden, dass ein selektiver Zugang zu Ruthenium-Carbenkomplex 53 gelang. Verbindung 53 konnte in einer guten Ausbeute von 86% in Form eines dunkelvioletten Feststoffes isoliert und vollständig charakterisiert werden. Dass es sich bei 53 tatsächlich um einen Carbenkomplex mit einer M=C-Doppelbindung handelt, konnte mithilfe der Molekülstruktur im Festkörper, den NMR-spektroskopischen Daten und der berechneten elektronischen Struktur bestätigt werden. So wies 53 eine kurze Ru=C-Bindung und eine planare Koordinationsumgebung des zentralen Kohlenstoffatoms [Winkelsumme: 358.9(1) Å] auf. Zusätzlich sprachen die im Vergleich zu Methandiid 20-Li2 verlängerten P-C- und C-S-Abstände für geschwächte elektrostatische Wechselwirkungen im Ligand-Rückgrat und somit für einen effizienten Elektronentransfer vom Methandiid zum Metall. Die NBO-Analyse ergab sowohl eine - als auch -Wechselwirkung der M-C-Bindung mit einer nur leichten Polarisierung zum Kohlenstoffatom. Ähnliche Beobachtungen (kurzer Ir-C-Abstand, Planarität am Kohlenstoffatom, reduzierte elektrostatische Wechselwirkungen im Ligand-Rückgrat, NBO-Analyse) wurden ebenfalls für den Iridium-Carbenkomplex 53 gemacht.Die negativere Ladung am Carben-Kohlenstoffatom wies hierbei allerdings auf einen leicht ylidischeren Charakter der MC-Bindung als im Ruthenium-Analogon 53 hin. Aufbauend auf der elektronischen Natur der M=C-Bindung ergaben sich unterschiedliche Reaktivitäten der Carbenkomplexe. Während der Zirkonocenkomplex 50 gegenüber Aldehyden, Ketonen und Disulfiden entweder keine Reaktivität oder Zersetzung zum zweifach protonierten Liganden zeigte, erfolgte ausgehend von Ruthenium-Carbenkomplex 52-Int die intramolekulare CH-Aktivierung zu 52. Im Gegensatz dazu konnte der Ruthenium-Carbenkomplex 53 in einer Vielzahl von EH-Bindungsaktivierungen eingesetzt werden. Dabei konnten zahlreiche E-H-Bindungen bei Raumtemperatur aktiviert und das nicht-unschuldige Verhalten des Methandiid-Liganden unter Beweis gestellt werden. So konnten die O-H- und N-H-Bindungen in einer Serie von Alkoholen und Aminen, die P-H-Bindung in sekundären Phosphanoxiden und die hydridischen SiH- und BH-Bindungen in Silanen und Boranen durch 53 gespalten werden. Durch röntgenstrukturanalytische Aufklärung der Molekülstrukturen im Festkörper konnte gezeigt werden, dass die Bindungsaktivierung im Allgemeinen unter 1,2-Addition der Substrate auf die Ru=C-Doppelbindung unter Bildung der entsprechenden cis-Additionsprodukte erfolgte. Die Aufhebung der Metall-Kohlenstoffdoppel- zu einer -einfachbindung machte sich in einer Verlängerung der Ru=C-Bindung von 1.965(2) Å in 53 auf etwa 2.2 Å bemerkbar. Zudem konnte in allen Molekülstrukturen der Aktivierungsprodukte eine Pyramidalisierung des ehemals planaren Carben-Kohlenstoffatoms detektiert werden. Bezüglich der Regioselektivität verliefen die Umsetzungen mit Substraten, in denen das Wasserstoffatom einen protischen (O-H, N-H-Bindungen) bzw. mäßig protischen/hydridischen (P-H-Bindungen) Charakter aufweist, erwartungsgemäß unter Protonierung des nukleophilen Carben-Kohlenstoffatoms. Interessanterweise führten die O-H- und N-H-Aktivierungsreaktionen z.T. zur Ausbildung eines Gleichgewichts zwischen Carbenkomplex und Additionsprodukt. Dabei konnte ein derartiger Gleichgewichtsprozess in der Chemie Methandiid-basierter Carbenkomplexe bisher nicht beobachtet werden, was die außerordentliche Stabilität des Rutheniumkomplexes 53 unterstreicht. Diese Reversibilität wurde bspw. anhand der Umsetzung von Komplex 53 mit p Methoxyphenol mittels VT-NMR-Studien untersucht. Dabei konnte gezeigt werden, dass sich das Gleichgewicht beim Abkühlen auf 80 °C gemäß entropischer Effekte fast vollständig auf die Seite des Additionsproduktes verschieben lässt, während beim Erwärmen auf Raumtemperatur das Gleichgewicht auf der Seite des Carbenkomplexes liegt. Ähnliche Gleichgewichtsprozesse konnten bei der N-H-Aktivierung beobachtet werden. Bei der Aktivierung von Ammoniak konnte das Additionsprodukt 60 nicht isoliert werden, da auch hier ein stark temperaturabhängiges Gleichgewicht vorlag, wobei erst ab 90 °C das Gleichgewicht vollständig auf der Seite des Aktivierungskomplexes 60 lag. Daher konnte 60 nicht isoliert und eindeutig identifiziert werden. In folgenden Arbeiten sollte die Isolierung von 60 im Festkörper angestrebt und somit dessen Existenz nachgewiesen werden. Zudem könnten auch hier Übertragungsreaktionen des aktivierten Ammoniaks auf ungesättigte Substrate durchgeführt werden. Überraschenderweise zeigte die Si-H-Bindungsaktivierung von unterschiedlich substituierten aliphatischen und aromatischen Silanen ein analoges Reaktionsmuster und führte zur selektiven Bildung der entsprechenden Silylkomplexe 66a-66f anstelle der aufgrund der Polaritäten zu erwartenden Hydrido-Spezies. Mittels DFT-Rechnungen konnte gezeigt werden, dass der Reaktionsmechanismus der SiH-Aktivierung nicht über eine konzertierte 1,2-Addition, sondern über einen zweistufigen Prozess verläuft. Dabei ermöglichen die flexiblen Koordinationseigenschaften des Liganden in 53 eine oxidative Addition der Si-H-Bindung an das Ruthenium-Zentrum, auf die ein Hydrid-Transfer zum Methandiid-Kohlenstoffatom folgt. Neben einfachen Bindungsaktivierungen wurde das Potential der synthetisierten Silylkomplexe 66a-66c in Hydrosilylierungsreaktionen untersucht. In diesem Zusammenhang wurde die Hydrosilylierung von Norbornen angestrebt. Während bei Raumtemperatur keine Reaktion stattfand, konnte nach Erhöhung der Temperatur auf 80 °C das gewünschte Hydrosilylierungsprodukt 68 zwar mittels GC-MS-Analytik nachgewiesen werden, jedoch entstand bei den gewählten Reaktionsbedingungen das ROMP-Produkt 69 als Hauptprodukt. In weiterführenden Arbeiten müssen noch Optimierungsversuche der Reaktionsbedingungen zu einem selektiveren Umsatz zum Hydrosilylierungsprodukt durchgeführt werden. Interessante Ergebnisse lieferten zudem die Umsetzungen des Ruthenium-Carbenkomplexes 53 mit Boranen und verschiedenen Boran-Lewis-Basen-Addukten. Dabei führte die Reaktion von 53 mit Catecholboran zur Bildung des Hydridokomplexes 73, dessen Molekülstruktur im Festkörper bestimmt werden konnte. Jedoch konnte der Komplex aufgrund seiner Instabilität in Lösung bisher nicht vollständig NMR-spektroskopisch und mittels Elementaranalytik charakterisiert werden. Im Gegensatz zur Si-H-Aktivierung findet hier die Addition entsprechend der Polarität der B-H-Bindung statt. Erstaunlicherweise führte die BH Bindungsaktivierung in Pinakolboran jedoch nicht zu einer zu 73 analogen Hydrid-Spezies. Der NMR-spektroskopische Verlauf der Umsetzung deutete zunächst auf die Bildung des BH-Additionsproduktes unter Protonierung des PCS-Rückgrats hin, welches sich in eine andere, bisher nicht identifizierbare Spezies umwandelte. Wiederum zu einem anderen Ergebnis führte die Umsetzung von 53 mit BH3∙SMe2. Durch Insertion eines Borans in die Thiophosphoryl-Einheit unter Aktivierung der B-H-Bindung wurde hierbei Komplex 76 gebildet, der als zentrales Strukturmotiv einen P–B–S–Ru–C-Fünfring aufwies. Neben der Spaltung polarer E-H-Bindungen gelang außerdem die Aktivierung der unpolaren Bindung in Diwasserstoff unter Bildung des Hydridokomplexes 77. Mittels Röntgenstrukturanalyse konnte auch hier eine cis-Addition von H2 auf die RuC-Doppel-bindung bestätigt und das Signal des hydridischen Wasserstoffatom eindeutig im 1H NMR-Spektrum der Verbindung bei H = 6.62 ppm detektiert werden. Interessanterweise konnte Verbindung 77 ebenfalls durch Dehydrierung von iso Propanol bzw. Ameisensäure (HCOOH) unter Abspaltung von Aceton bzw. CO2 synthetisiert werden. Aufbauend auf der beobachteten Dehydrierung von iPrOH unter Bildung des Hydridokomplexes 77 wurde der Frage nach einer möglichen Anwendung des Carbenkomplexes 53 in der katalytischen Transferhydrierung von Ketonen zu Alkoholen nachgegangen. Obgleich die Aktivierung von H2 bzw. die Dehydrierung von iPrOH keine Reversibilität aufwies, sollte ein Katalysezyklus basierend auf einem Wechselspiel zwischen Carben- 53 und Hydridokomplex 77 mit iPrOH als Wasserstoffquelle realisierbar sein. Diesbezüglich lieferten erste Reduktionsversuche von Acetophenon zu 1 Phenylethanol mit 53 und KOtBu als Hilfsbase allerdings schlechte Alkohol-Ausbeuten im Vergleich zu literaturbekannten, übergangsmetallkatalysierten Transferhydrierungen. Ein Katalyseansatz mit 0.50 mol-% 53 und 19 mol-% KOtBu ergab nach 24 h bei 75 °C eine Alkohol-Ausbeute von gerade einmal 55%. Zudem konnte eine starke Abhängigkeit der Umsätze von der eingesetzten Basenmenge beobachtet werden, was auf eine konkurrierende, Basen-induzierte Reduktion hindeutete. Eine Optimierung der Katalysebedingungen gelang durch Zugabe von Triphenylphosphan. Mithilfe des Additivs konnte innerhalb von 12 h bei 75 °C mit 0.50 mol-% 53, 6.20 mol-% KOtBu und 6.20 mol-% PPh3 ein nahezu quantitativer Umsatz (94%) von Acetophenon zu 1-Phenylethanol beobachtet werden. Sogar eine Verringerung der Basen- und Phosphanmenge auf 1.60 und 1.10 mol-% reichte aus, um Ausbeuten von 90% zu erreichen (Abb. 4.5., rechts). Dabei konnte Rutheniumkomplex 53 als erster Methandiid-basierter Carbenkomplex mit katalytischem Potential in Transferhydrierungen etabliert werden. Außerdem beschränkte sich die katalytische Aktivität von 53/PPh3 nicht nur auf die Reduktion von Acetophenon, sondern konnte auch erfolgreich auf weitere aromatische und aliphatische Ketone übertragen werden. Mittels NMR-spektroskopischer Untersuchungen des Katalyseverlaufs gelang ein Nachweis der katalytisch aktiven Spezies im Katalysezyklus. So konnte bei 75 °C zunächst die erwartungsgemäße Entstehung des Hydridokomplexes 77 beobachtet werden. Dieser setzte sich anschließend mit PPh3 zum cyclometallierten Phosphankomplex 52 um. Aufbauend auf diesen Beobachtungen wurde ebenfalls Komplex 52 hinsichtlich seines katalytischen Potentials in der Reduktion von Acetophenon untersucht, wobei noch bessere Umsätze als mit dem Katalysator 53/PPh3 beobachtet wurden. Hierbei konnte bereits nach 3 h mit 0.50 mol-% 52 und 1.60 mol-% KOtBu eine Ausbeute von 95% erzielt werden. Zudem führten Ansätze mit 52 auch ohne Zugabe einer Base zu Umsätzen von ca. 40%. Eine Übertragung der Katalysebedingungen auf die Reduktion weiterer Keton-Derivate lieferte ebenfalls gute Ergebnisse und ergab Alkohol-Ausbeuten zwischen 72% und 96%. Die für Ruthenium-Carbenkomplex 53 gefundene Reaktivität und das nicht-unschuldige Verhalten des Methandiid-Liganden konnten außerdem auch für Iridium-Carbenkomplex 55 beobachtet werden. So konnten analoge NH, PH- und SiH-Additionsprodukte selektiv synthetisiert und in guten Ausbeuten (etwa 60-90%) analysenrein erhalten werden. In Analogie zu Rutheniumkomplex 53 führte die Aktivierung von Substraten mit unterschiedlichen E-H-Bindungen entsprechend der Ladungsverteilung im Ir+C--Fragment zur Protonierung der PCS-Brücke in 55. Dabei wiesen auch hier die Additionsprodukte im Allgemeinen eine cis-Anordnung der vorherigen E-H-Einheit auf. Einzige Ausnahme stellte das mit p-Nitroanilin gebildete NH-Aktivierungsprodukt 61b dar. Hierbei konnte mittels Röntgenstrukturanalyse eine trans-Anordnung der Amido-Einheit und des PCHS-Brückenprotons detektiert werden, die durch Ausbildung einer Wasserstoffbrückenbindung zwischen der Amido-NH- Einheit und dem Sauerstoffatom des Sulfonyl-Substituentens begünstigt wird. Zudem konnte für die Bildung von 61b ein bei Raumtemperatur reversibler Reaktionsprozess unter Rückbildung des Carbenkomplexes 55 und Abspaltung von p-Nitroanilin beobachtet werden. In künftigen Experimenten sollte untersucht werden, ob aufgrund der Reversibilität katalytische Hydroaminierungen mit 61b realisierbar sind. Trotz des hydridischen Charakters des Si-H-Wasserstoffatoms in Silanen wurden auch mit Carbenkomplex 55 ausschließlich die SiH-Bindungsaktivierungskomplexe 71a-71c gebildet. Zudem konnte bei der Aktivierung von Triphenylsilan zwar das Additionsprodukt 71a mittels NMR-spektroskopischer Untersuchungen in der Reaktionslösung nachgewiesen werden, jedoch setzte sich dieses bereits bei Raumtemperatur zum cyclometallierten Komplex 72 um. Interessanterweise resultierten die Aktivierung von H2 und die Dehydrierung von iPrOH ebenfalls in 72. Mittels NMR-spektroskopischer Untersuchungen des Reaktionsverlaufes konnte hierbei gezeigt werden, dass die Cyclometallierung ausgehend von dem in situ gebildeten Iridium-Hydridokomplex 79 stattfindet. Deuterierungsexperimente mit iPrOH-d8 belegten außerdem, dass die Protonierung der PCS Brücke durch iPrOH und nicht durch direkte ortho-C-H-Aktivierung der Sulfonyl-Phenyl-Gruppe erfolgt. Die Isolierung des Iridium-Hydridokomplexes 79 war aufgrund seiner schnellen Umsetzung zu 72 daher nicht möglich. Die Nukleophilie des Carben-Kohlenstoffatoms und die ausgezeichnete M=C-Wechselwirkung in Ruthenium-Carbenkomplex 53 ermöglichten neben EH-Bindungsaktivierungen außerdem [2+2]-Cycloadditionsreaktionen mit Iso- und Thioisocyanaten. In diesem Zusammenhang konnten mit tert-Butyl- und Phenylisocyanat die Cycloadditionsprodukte 80a und 80b synthetisiert, in guten Ausbeuten isoliert (79% bzw. 80%) und vollständig charakterisiert werden. Die mittels Röntgenstrukturanalyse durchgeführte Aufklärung der Molekülstruktur von 80a im Festkörper bestätigte die Ausbildung eines C-Ru-N-C-Vierringes als zentrales Strukturmotiv, was mit literaturbekannten Umsetzungen dieser Art übereinstimmt. Mit tert-Butyl- und Phenylthioisocyanat hingegen wurden die Iminkomplexe 81a/b unter Addition der Ruthenium-Kohlenstoff-Doppelbindung an das CS-Fragment im Thioisocyanat erhalten. Dabei konnte die Ausbildung eines C-Ru-S-C-Vierringes als zentrales Strukturmotiv beobachtet werden. Insgesamt folgte die Selektivität der gebildeten [2+2]-Cycloadditionsprodukte 80a/b und 81a/b den Prinzipien des HSAB-Konzeptes, wonach jeweils das weichere Atom des Heteroallens an das Ruthenium-Zentrum bindet. Obgleich die Reaktivität Methandiid-basierter Carbenkomplexe mit verschiedenen Heteroallenen bereits in der Literatur beschrieben wurde, stellte die Umsetzung mit Thioisocyanaten zu 81a/b ein bisher unbekanntes Reaktionsverhalten dieser Verbindungsklasse dar. Neben der Anwendung des Methandiids 20-Li2 als Ligand für die Synthese neuer Übergangsmetallkomplexe erwies sich das Dianion außerdem als geeignet für die Darstellung des Li/Cl-Carbenoids 83. Dabei konnte 83 zum einen durch Oxidation von 20-Li2 mit Hexachlorethan (C2Cl6) und zum anderen durch Metallierung des chlorierten Liganden 82 synthetisiert und in guten Ausbeuten (67-82%) als farbloser, kristalliner Feststoff isoliert werden. Verbindung 83 erwies sich dabei als ein seltenes, bei Raumtemperatur stabiles Li/Cl-Carbenoid. Aufgrund der Stabilität im Festkörper als auch in Lösung bei Raumtemperatur konnte 83 zudem NMR-spektroskopisch und mittels Elementaranalytik vollständig charakterisiert werden. Ebenfalls gelang die Aufklärung der Molekülstruktur von 83 im Festkörper. Diese zeigte keinen direkten Kontakt zwischen dem Carbenoid-Kohlenstoff- und Lithiumatom und lieferte damit neben der elektronischen Stabilisierung eine Erklärung für die beobachtete Stabilität von 83. Dabei beteiligt sich das Ligandsystem durch Koordination der Sulfonyl-Gruppen an das Lithiumatom erheblich an der Stabilisierung, sodass eine Lithiumchlorid-Eliminierung erschwert wird. Außerdem zeigte die Molekülstruktur keine Verlängerung der C-Cl-Bindung, wie es für unstabilisierte Carbenoide in der Literatur beschrieben wird. Diese Tatsache und die im 13C-NMR-Spektrum beobachtete Abschirmung des Carbenoid-Kohlenstoffatoms im Vergleich zur chlorierten Vorstufe 82 lieferten erste Anzeichen für einen geringen carbenoiden Charakter von 83. Außerdem bestätigten quantenchemische Rechnungen keine signifikante Polarisierung der CCl-Bindung. Die durch die Stabilisierung resultierende Verringerung des carbenoiden Charakters und somit der Ambiphilie spiegelte sich auch in der Reaktivität von 83 wider. So konnte Verbindung 83 nicht als Cyclopropanierungsreagenz verwendet werden, wie es zumeist für klassische Carbenoide der Fall ist. Gegenüber Elektrophilen wie Methyliodid oder Chlordiphenylphosphan reagierte 83 in Analogie zu Organolithiumbasen zu den Verbindungen 84a und 84b. Jedoch konnte 83 als Carbenvorstufe zur Synthese des Palladium-Carbenkomplexes 51a unter LiCl-Eliminierung eingesetzt werden, was den leicht vorhandenen carbenoiden Charakter von 83 wiedergibt. Zudem wurde 83 hinsichtlich seines Aktivierungspotentials von EE-Bindungen untersucht. Während die Aktivierung der BH-Bindung in Boranen und die BB-Bindung in Diboranen nicht gelang, konnte die SS-Bindung in 2,2‘-Dipyridyl- und 4,4‘-Dipyridyldisulfid gespalten und Verbindung 90 analysenrein erhalten werden (Schema 4.8.). Studien zur Aufklärung dieses Reaktionsverhaltens stehen jedoch noch aus. Bezüglich der Aktivierung von P-H-Bindungen in unterschiedlich substituierten aromatischen Phosphanen konnte für 83 eine zu einem Silyl-stabilisierten Carbenoid analoge Reaktivität gefunden werden. Hierbei erfolgte keine Addition der P-H-Bindung an das carbenoide Kohlenstoffatom, sondern die selektive Dehydrokupplung der Phosphane zu Diphosphanen unter LiCl-Eliminierung. Diese überraschende und bis dato für Carbenoide unbekannte Reaktivität erfolgte unter milden Reaktionsbedingungen (Raumtemperatur) und ohne Einsatz von Übergangsmetallkatalysatoren. Insgesamt konnte für Verbindung 83 ein vielfältiges Reaktionsverhalten gefunden werden. Neben dessen Eignung als Carbenvorstufe bei der Synthese von Übergangsmetall-Carbenkomplexen, konnte die Spezies in der Aktivierung von SS- und PH-Bindungen eingesetzt werden. In zukünftigen Reaktivitätsstudien sollte das beobachtete Potential auf weitere Substrate übertragen werden. N2 - This thesis deals with the application of the sulfonyl stabilized methandiide 20-Li2 as a ligand in transition metal complexes. In this context, 20-Li2 reacted with several transition metal halides to the corresponding carbene complexes via salt metathesis reaction. The obtained systems exhibited flexible bonding situations concerning the nature of the MC bond and revealed different coordination modes of the sulfonyl moiety. This flexibility significantly influenced the stability and the reactivity of these complexes. Depending on the nature of the metals and co-ligands, carbene complexes with a more ylidic interaction (A) and such with a real MC double bond (B) could be obtained. In this context, a variety of novel complexes with both early (zirconium) and late (palladium, ruthenium, iridium) transition metals were establishe.The synthesized compounds revealed different structural and electronic properties, enabling their classification into the categories A and B. For example, the reaction of methandiide 20-Li2 with zirconocene dichloride led to the selective formation of zirconocene complex 50. NMR spectroscopy (e.g. high-field shift of the 13C NMR signal of the carbene carbon atom) and the molecular structure (e.g. pyramidalisation of the “carbene“ carbon atom) led to the conclusion, that 50 could not be described as a carbene complex with a ZrC double bond. This could also be confirmed by theoretical studies. Thus, the “Natural Bond Orbital“ analysis (NBO analysis) showed a significant negatively charged carbon atom (qc = 1.42), in line with the nucleophilicity of 50 and a positive charge at the zirconium atom (qZr = 1.35). Hence, the nature of the ZrC bond in 50 is best described by an ylidic interaction. Similar results were obtained when methandiide 20-Li2 was treated with [(PPh3)2PdCl2] or [(PPh3)3RuCl2] to form the complexes 51a and 52-Int. Comparable to 50, NBO analysis of 51a and 52-Int revealed only a  bond between the metal and the carbon atom, but no  interaction. According to the electronic structure of 51a and 52-Int, both complexes turned out to be instable and highly reactive while compound 51a decomposed in solution under the formation of several decomposition products and the ruthenium carbene intermediate 52-Int underwent an intramolecular CH-activation of the phenyl group of the sulfonyl moiety to the cyclometalated complex 52. Product 52 could be isolated in a yield of 62% and fully characterized. In the case of the palladium and ruthenium complexes, the observed weak  interaction between metal and carbon atom can be referred to the electron rich metal centers. Here, the electron density of the late transition metals was additionally increased by strong  donor and poor  acceptor abilities of the phosphine ligands. Hence, substitution of the phosphines in the ruthenium dichloride precursor by an arene ligand (p-cymene) resulted in a change of the electronics of the metal fragment, allowing the selective access to ruthenium carbene complex 53. Compound 53 could be isolated in 86% yield as a purple solid and fully characterized. X-ray diffraction analysis, NMR spectroscopy and theoretical studies confirmed the double bond character of the MC interaction in 53. The molecular structure of 53 revealed a short RuC bond and a planar coordination environment of the central carbon atom [sum of angles: 358.9(1) Å]. In comparison with the bond lengths of the PCS backbone in methandiide 20-Li2, elongated PC and CS bonds were found in 53, indicating weaker electrostatic interactions within the ligand framework and thus an efficient electron transfer from the methandiide to the metal fragment. Additionally, the NBO analysis revealed both  and  contribution of the MC bond with only a slight polarization to the carbon atom. Similar observations (short IrC distance, planar coordination environment of the carbon atom, reduced electrostatic interactions within the ligand framework, NBO analysis) were made for iridium carbene complex 55. Nevertheless, the carbene carbon atom in 55 was found to exhibit a higher negative charge, indicating a more pronounced ylidic character of the MC bond compared to ruthenium complex 53. According to the electronic nature of the MC bond, different reactivity patterns could be observed for the carbene complexes. Whereas the reaction of zirconocene complex 50 with aldehydes, ketones or disulfides was either unsuccessful or led to decomposition under formation of the protonated ligand 20, an intramolecular CH activation to 52 could be observed in the case of ruthenium carbene complex 52-Int. On the contrary, ruthenium carbene complex 53 could be applied in a variety of EH bond activation reactions at room temperature. The reactions proved the non-innocent behaviour of the methandiide ligand which serves as nucleophilic center. Hence, the OH and NH bonds in a series of alcohols and amines (products 56, 58 and 59), the PH bond in secondary phosphine oxides and the hydridic SiH and BH bonds in silanes and boranes could be splitted using complex 53. X-ray diffraction analyses of the activation products revealed a 1,2-addition of the substrates across the RuC double bond to the corresponding cis-addition products. Thereby, the change from a metal carbon double to a metal carbon single bond was acoompanied by an elongation of the RuC bond from 1.965(2) Å in 53 to about 2.2 Å. Additionally, a pyramidalization of the carbon atom could be detected, instead of a planar coordination environment as in carbene complex 53. All activation reactions performed with substrates containing a protic (OH, NH bonds) or a slightly protic/hydridic (PH bonds) hydrogen occurred via protonation of the nucleophilic carbene carbon atom. Interestingly, some OH and NH activation reactions resulted in an equilibrium between the carbene and the activation complex. It is important to note, that such an equilibrium has so far not been observed for methandiide based carbene complexes and thus underlines the extraordinary stability of ruthenium complex 53. The reversibility could be confirmed by VT NMR experiments, such as of the reaction of 53 with p methoxyphenol. These studies showed that the equilibrium can almost completely be shifted towards the addition product at 80 °C due to entropical reasons. On the contrary, warming the sample to room temperature led to the re-formation of carbene complex 53. A reversible reaction process could also be observed for the activation of NH bonds. For example, in the case of the activation of ammonia the amido complex 60 could not be isolated due to a strong temperature dependency of the equilibrium. Temperatures as low as 90 °C were necessary to move the equilibrium to the side of the activation product. Future studies will focus on the isolation of 60 in solid state in order to confirm the existence of 60. Furthermore, a transfer of the activated ammonia to unsaturated substrates will be tested. Surprisingly, reactions of a series of aliphatic and aromatic silanes with 53 led to an analogous bond activation and to the selective formation of the silyl complexes 66a 66f. According to the polarity of the SiH bond in silanes, a reverse reactivity with formation of the corresponding hydrido complexes was expected, but could not be observed at all. The reaction mechanism could be elucidated by DFT studies and was found to proceed via a stepwise process. Thereby, the flexible MC bond in 53 enabled an oxidative addition of the SiH bond to the ruthenium center, followed by a hydride transfer to the methanide carbon atom. Besides the isolation and characterization of the silyl complexes 66a-66f, those complexes were also tested in the catalytic hydrosilylation of norbornene. Whereas no reaction was observed at room temperature, hydrosilylation product 68 was formed at 80 °C. Nevertheless, the formation of 68 was only accomplished in small amounts as confirmed by GC-MS analysis. Instead, the ROMP product turned out to be the main product under the reaction conditions. Future studies should concentrate on the optimisation of the reaction conditions in order to improve the selectivity of the hydrosilylation reaction. In contrast to the so far discussed EH bond activation reactions, carbene complex 53 showed diverse reactivities towards boranes and different borane Lewis base adducts. The reaction of 53 with catechol borane gave hydrido complex 73, which could be characterized by X-ray diffraction analysis. In contrast to the activation of the SiH bond, the BH bond activation complex 73 reflects the expected reactivity due to the polarity of the BH and the MC bond. Surprisingly, the activation of the BH bond in pinacol borane did not lead to a hydrido complex similar to 73. In this case, NMR studies of the reaction process confirmed the formation of the BH addition product under protonation of the PCS backbone, followed by a rapid conversion to a novel, so far unidentified complex. The formation of a completely different product was again observed within the reaction of 53 with BH3∙SMe2. Here, complex 76 could be isolated, which is formed by activation of the BH bond, accompanied by an insertion of one borane into the thiophosphoryl moiety. The molecular structure of 76 revealed a five-membered P–B–S–Ru–C ring as the central structural motif. Besides its activation potential concerning polar EH bonds, carbene complex 53 was also applied in the activation of non polar bonds like the one in dihydrogen giving way to hydrido complex 77. The molecular structure of 77 could be confirmed by X-ray diffraction analysis and revealed a cis-addition of H2 across the RuC double bond. Additionally, the signal for the hydridic hydrogen atom could be detected in the 1H NMR spectrum at H = 6.62 ppm. Interestingly, compound 77 could also be obtained by dehydrogenation of iso propanol or formic acid (HCOOH) via formation of acetone or CO2. Based on the observed dehydrogenation of iPrOH, an application of carbene complex 53 as catalyst in catalytic transfer hydrogenations of ketones to alcohols was assumed. Despite the fact that the activation of H2 and the dehydrogenation of iPrOH did not show any reversibility, a catalytic cycle including both carbene complex 53 and hydrido complex 77 with iPrOH as hydrogen source should be realizable (Fig. 4.5., left). First attempts aiming at the catalytic reduction of acetophenone to 1 phenylethanol with 53 and KOtBu as base delivered poor yields of the alcohol in comparison with literature-known transition metal catalysts. For example, 0.50 mol-% 53 and 19 mol-% KOtBu gave 1 phenylethanol in only 55% yield after 24 h at 75 °C. Additionally, the conversions turned out to depend on the amount of base indicating a competing base induced reduction. Optimization of the reaction conditions by adding triphenylphosphine as additive led to almost quantitative conversions (94%) to 1 phenylethanol within 12 h at 75 °C using 0.50 mol-% 53, 6.20 mol-% KOtBu and 6.20 mol % PPh3. Yields of about 90% could still be achieved when decreasing the KOtBu and PPh3 loadings to 1.60 and 1.10 mol. Overall, ruthenium complex 53 is the first methandiide based carbene complex applied in catalytic transfer hydrogenations. Thereby, the catalytic activity of 53/PPh3 was not only limited to the reduction of acetophenone, but could also be transferred to further aromatic and aliphatic ketones. The reaction process of the catalytic transfer hydrogenation was studied by NMR spectroscopy to determine the catalytic active species formed during the reaction process. These studies showed that at first the hydrido complex 77 is formed at 75 °C, followed by its reaction with PPh3 to the cyclometalated phosphine complex 52. Studies on the catalytic ability of 52 itself in the transfer hydrogenation of acetophenone to 1 phenylethanol revealed even better performances. Overall, better yields could be obtained when using 52 as catalyst. A yield of 95% could already be obtained after 3 h using 0.50 mol-% 52 and 1.60 mol-% KOtBu. Additionally, a test reaction using only 52 without any additional base led to a remarkable yield of about 40%. Comparable to the catalytic system 53/PPh3, complex 52 could also be applied in the catalytic reduction of further ketones giving yields of about 72% to 96%. The observed reactivity of ruthenium carbene complex 53 and the non-innocent behavior of the methandiide ligand could also be established for iridium carbene complex 55. Here, similar NH, PH and SiH addition products could be synthesized selectively and isolated in good yields of 60-90%. Analogous to ruthenium complex 53, the activation of substrates with different EH bonds led to protonation of the PCS bridge in 55. This is in line with the polarization distribution of the Ir+C- bond in 55. The activation products again revealed a cis-addition of the EH unit on the IrC fragment. However, one exception was observed in the case of the reaction of 55 with p-nitro-aniline, which led to the formation of the N H activation product 61b with a trans-arrangement of the amido ligand relative to the PCHS hydrogen atom. Here, the trans-arrangement is favoured due to the formation of a hydrogen bond between the amido and the sulfonyl units. Additionally, complex 61b showed a reversible reaction process at room temperature, leading to the re-formation of carbene complex 55 and of p-nitroaniline. Due to the reversibility of 61b in solution, further studies should concentrate on the potential of 61b as catalyst for hydroamination reactions. Despite the hydridic character of the hydrogen atom in silanes, SiH bond activation reactions of carbene complex 55 exclusively led to the formation of the silyl complexes 71a-71c under protonation of the nucleophilic carbene carbon atom in 55. Interestingly, 71a was found to be instable and further reacted to the cyclometalated complex 72 already at room temperature. Additionally, the activation of H2 and the dehydrogenation of iPrOH also resulted in the formation of 72. Here, the reaction process was studied by NMR spectroscopy. These experiments revealed that the cyclometalation occurs from hydrido complex 79, which is formed in situ during the reaction process. Furthermore, deuteration experiments with iPrOH d8 evidenced that the protonation of the PCS fragment results from the reaction of 55 with iPrOH and is not formed via an intramolecular cyclometalation via CH activation of the sulfonyl phenyl group. Due to the rapid transformation of hydrido complex 79 to the cyclometalated species 72, the isolation of 79 was not possible. The nucleophilicity of the carbene carbon atom and the special MC interaction in ruthenium carbene complex 53 also allowed for [2+2] cycloaddition reactions with iso- and thioisocyanates. In this context, reaction of 53 with tert-butyl and phenyl isocyanate afforded the cycloaddition products 80a and 80b. The complexes 80a/b could be isolated in good yields (about 80%) as well as fully characterized. X-ray diffraction analysis of 80a confirmed the formation of a four-membered CRuNC ring as the central structural motif of 80a. These findings were in line with literature-known cycloaddition reactions of methandiide based carbene complexes with isocyanates. On the contrary, reaction of 53 with tert-butyl and phenyl thioisocyanate afforded the complexes 81a/b. Here, addition of the heteroallene to the ruthenium carbon double bond occurred via the CS fragment of the thioisocyanate. Hence, the [2+2] cycloaddition resulted in the formation of a four-membered CRuSC ring as central structural motif. Overall, the observed selectivity of the [2+2] cycloaddition reactions to 80a/b and 81a/b can be explained by the HSAB concept. Accordingly, the softer atom of the heteroallene is connected to the soft ruthenium center. Despite the fact that the reactivity of methandiide based carbene complexes with different heteroallenes has already been reported in literature, cycloaddition reactions with thioisocyanates affording complexes such as 81a/b has so far been unknown. Besides its application as ligand for the synthesis of novel transition metal complexes, methandiide 20-Li2 was found to be suitable for the synthesis of Li/Cl carbenoid 83. On the one hand, compound 83 could be obtained by oxidation of 20-Li2 with hexachloroethane (C2Cl6) and on the other hand by metalation of the chloro derivative 82. Carbenoid 83 could be isolated as a colorless, crystalline solid in good yields (67 82%) and represents a rare example of a room temperature stable Li/Cl carbenoid. Due to the stability of 83 both in solid state and in solution at room temperature, the carbenoid could be characterized by NMR spectroscopy and elemental analysis. Moreover, the molecular structure of 83 could be determined by X-ray diffraction analysis, revealing no direct contact between the carbenoid carbon and the lithium atom. Instead, the sulfonyl group of the ligand system coordinates to the lithium atom and thus inhibits the elimination of lithium chloride. This and the electronic stabilisation by the α substituents result in the observed stability of 83. Furthermore, the molecular structure did not reveal an elongation of the CCl bond as often described for unstabilised carbenoids. These findings and the observed deshielding of the carbenoid carbon atom in the 13C NMR spectrum relative to the chlorinated precursor 82 suggested a reduced carbenoid character of 83. This reduced carbenoid character of 83 could also be observed in reactivity studies. Contrary to classical carbenoids, 83 could thus not be used as reagent for cyclopropanation reactions. However, the still present nucleophilicity could be proven by treatment of 83 with electrophiles like methyl iodide or chlorodiphenylphosphine. Here, the compounds 84a and 84b could be obtained via salt elimination reactions. Additionally, 83 could be applied as carbene precursor for the synthesis of palladium carbene complex 51a under elimination of lithium chloride. The observed reactivity underlined the still present carbenoid character of 83. Furthermore, the potential of 83 in the activation of EE bonds in different substrates was tested. Whereas the activation of the BH bond in boranes and the BB bond in diboranes was not possible with 83, the SS bond in 2,2‘-dipyridyl and 4,4‘ dipyridyl disulfide could be splitted. The mechanism of this reaction, however, still has to be elucidate A remarkable reactivity was also observed in the reaction of carbenoid 83 with various secondary phosphines. Here, no addition of the PH bond to the carbenoid carbon atom occurred, but instead the selective dehydrocoupling of the phosphines to diphosphines via elimination of lithium chloride. It is important to note that this unexpected and so far unknown reactivity could be carried out unter mild reaction conditions (room temperature) using different functionalized phosphines and did not require the use of transition metal complexes. Overall, compound 83 exhibits a huge variety of reactivity patterns. Besides its function as carbene precursor for the synthesis of transition metal carbene complexes, the carbenoid behaviour could also be applied in the activation of SS and PH bonds. Future investigations should aim at the extension of the activation potential of 83 to further substrates. KW - Carbenkomplexe KW - Dianion KW - Chemische Bindung KW - nicht-unschuldiges Ligandverhalten KW - Aktivierung KW - Methandiide KW - Methandiid-basierte Carbenkomplexe KW - Bindungsaktivierungsreaktionen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121549 ER - TY - THES A1 - Weirauch, Katja T1 - Neue Herausforderungen an die professionellen Kompetenzen von Chemie-Lehrkräften durch die Implementation von Seminarfächern T1 - New Challenges to the Professional Competencies of Chemistry teachers caused by the Implementation of Science Seminar Courses N2 - Neuerungen in Bildungssystemen können nur erfolgreich sein, wenn sie planmäßig implementiert werden. Maßgeblich ist hierfür, dass die Lehrkräfte über die entsprechenden professionellen Kompetenzen verfügen. Die vorliegende Arbeit untersucht diesen Zusammenhang am Beispiel der Implementation von Seminarfächern im bayerischem Gymnasium. Es wird identifiziert, welche neuen Herausforderungen Chemie-Lehrkräfte mit Einführung der Wissenschaftspropädeutischen (W-) und Projekt-Seminare (P-) bewältigen müssen. Aus Interviews mit Lehrkräften wurden per qualitativer Inhaltsanalyse nach Mayring die Anforderungen an das Professionswissen der Lehrkräfte identifiziert. Für die W-Seminare konnte dargestellt werden, dass eine erfolgreiche Wissenschaftspropädeutik häufig an fehlendem Fachwissen der Lehrkräfte zu Nature of Science Inquiry (NOSI) scheiterte. Analog fehlte den Lehrkräften in den P-Seminaren Fachwissen zu Projektmanagement, sodass sie dies weder umsetzten, noch erfolgreich vermitteln konnten. Um die Lehrkräfte bei der Bewältigung der Herausforderungen zu unterstützen, wurden vielfältige Möglichkeiten der Kooperation von Seminarfächern mit der Universität als externem Partner erprobt. Methodenwerkzeuge für eine systematische Wissenschaftspropädeutik wurden entwickelt und im Rahmen von Lehrerfortbildungen weitergegeben. Weiterhin wurde ein Lehr-Lern-Labor „Analyseverfahren der Chemie“ für W-Seminare konzipiert und wiederholt erfolgreich durchgeführt. Damit wurden Erkenntnisse der empirischen Studie in nachweislich praxistaugliche Konzepte umgesetzt, die die erfolgreiche Implementation der Seminarfächer unterstützen können. N2 - Implementations of pedagogical innovations in school systems can only be successful if teachers are qualified for it – i. e. possess adequate pedagogical competencies to realize the new concept. In regard of this perspective, this thesis examines the implementation of Science- and Project-Seminar Courses (W- and P-Seminar) in Bavarian Gymnasium. The aim was to identify, which new challenges to their professional competencies teachers had to master when realizing the new teaching format. For that, interviews with teachers were analyzed according to Mayrings content analysis. It could be shown that Chemistry teachers generally could fulfill most of the tasks imposed on them. However, they lacked content knowledge about Nature of Science Inquiry (NOSI) and about project management. Consequently, they failed in teaching these contents successfully so that major aims of the Seminar Courses were not reached. These findings were directly transferred into concepts that provably may improve the implementation of W- and P-Seminars. Several new teaching tools were developed and repeatedly communicated in advanced training courses. Furthermore, lab-courses for students about chemical analytical methods were designed and extensively tested. Additionally, many other possibilities how Universities may cooperate with Science- and Project-Seminar-Courses are being described in this thesis. KW - Seminarfach KW - Wissenschaftspropädeutik KW - Implementation KW - Chemieunterricht KW - Organisationswissen KW - Beratungswissen KW - Fachspezifität KW - Wissenschaftspropädeutik KW - professionelle Kompetenz KW - Lehr-Lern-Labor KW - W-Seminar KW - P-Seminar KW - Bayerische Seminarfächer KW - Professionswissen KW - Lehrlernlabor Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151330 ER - TY - THES A1 - Wehner, Tobias T1 - Multifunktionale Kompositmaterialien auf Basis lanthanidhaltiger Verbindungen mit lumineszierenden Nanopartikeln und superparamagnetischen Mikropartikeln T1 - Multifunctional composite materials based on lanthanide containing compounds with luminescent nanoparticles and superparamagnetic microparticles N2 - Die vorliegende Arbeit umfasst die Synthese und Charakterisierung 23 neuartiger, multifunktionaler Kompositmaterialien basierend auf lanthanidhaltigen Verbindungen sowie verschiedenen Nano- und Mikropartikeln. Die dargestellten Materialien konnten als Core/Shell-Systeme mit einem nano- bzw. mikropartikelhaltigen Kern und einer lanthanidhaltigen Hülle charakterisiert werden und vereinen aufgrund ihres Kompositcharakters die spezifischen Eigenschaften der Einzelkomponenten wie Lumineszenz, Superparamagnetismus oder Reflexionseigen-schaften miteinander. Zur Synthese multifunktionaler, lumineszierender Materialien wurden zirconylbasierte, lumineszierende Nanopartikel mit Lanthanidchloriden und lanthanidhaltigen MOFs funktionalisiert. Die Kompositsysteme LnCl3@ZrO(FMN) (FMN = Flavinmononukleotid, Ln = Y, Sc, La, Eu, Tb, Ho) ermöglichen eine Modifizierung der Lumineszenzeigenschaf-ten der Materialien abhängig von der Reaktionstemperatur sowie dem verwendeten Selten-Erd-Ion. Durch Variation der Nanopartikelkomponente konnte mittels der Kom-posite LnCl3@ZrO(MFP) (MFP = Methylfluoresceinphosphat) ein zusätzlicher sol-vatochromer Effekt der Systeme eingeführt werden, während das Kompositmaterial YCl3@ZrO(RP) (RP = Resorufinphosphat) eine andere Chromatizität zugänglich macht. Durch Modifizierung von ZrO(FMN)- und ZrO(MFP)-Nanopartikeln mit 3∞[Eu2(BDC)3]· 2DMF·2H2O (BDC2- = Benzol-1,4-dicarboxylat) wurden Kompositmaterialien dargestellt, die zwei Lumineszenzprozesse mit unterschiedlicher Chromatizität und unterschiedli-cher Anregbarkeit miteinander kombinieren und somit eine reversible Schaltbarkeit zwischen beiden Prozessen durch Variation der Anregungswellenlänge ermöglichen. Zur Synthese luminomagnetischer Materialien wurden superparamagnetische Fe3O4/SiO2-Mikropartikel mit einer Vielzahl lanthanidhaltiger MOFs, die sich hinsichtlich ihrer Lumineszenzeigenschaften und ihrer Stabilität gegenüber Luft und Wasser unterscheiden, modifiziert. Als MOFs wurden hierbei 2∞[Ln2Cl6(Bipy)3]·2Bipy (Bipy = 4,4‘-Bipyridin, Ln = Nd, Sm, Eu, Tb, Er), 3∞[Eu(Im)2], 3∞[Ba0.95Eu0.05(Im)2] (Im = Imidazolat) und 3∞[Eu2(BDC)3]·2DMF·2H2O eingesetzt. Die Variation der zur Funktionalisierung verwendeten Komponente oder eine Kombination mehrerer MOFs ermöglicht eine Anpassung der Lumineszenz der Kompositmaterialien innerhalb des kompletten sichtbaren Spektralbereichs sowie im NIR-Bereich. Die dargestellten luminomagnetische Kompositmaterialien mit wasserempfindlichen MOFs können zur Detektion von Wasser in verschiedenen organischen Lösungsmitteln verwendet werden und stellen somit eine mobile und einfach anwendbare Alternative zur Karl-Fischer-Titration mit einer vergleichbaren Sensitivität dar. So eignen sich die Kompositsysteme 2∞[Eu2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 und 2∞[Eu2Cl6(Bipy)3]·2Bipy, 2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 als optische turn-off-Sensoren, während das Kom-posit 3∞[Eu2(BDC)3]·2DMF·2H2O,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 als ratiometrischer Sensor verwendet werden kann. Als Alternative zu sphärischen Partikeln wurden auch anisotrope, stäbchenförmige Fe3O4/SiO2-Mikropartikel mittels 3∞[Eu2(BDC)3]·2DMF·2H2O modifiziert. Das resul-tierende Kompositmaterial vereint die isotropen Lumineszenzeigenschaften der MOF-Hülle mit der anisotropen Reflexion von sichtbarem Licht der. Durch die Wahl der Anregungswellenlänge und Richtung eines externen Magnetfelds wird eine stufenlose und reversible Schaltbarkeit zwischen isotropen und anisotropen Eigenschaften ermöglicht. Durch mechanochemische Umsetzung der MOF-Edukte [LnCl3(Py)4]·0.5Py (Ln = Eu, Ho) und 4,4‘-Bipyridin konnte eine Vielzahl von literaturbekannten lanthanidhaltigen Komplexen und Koordinationspolymeren mittels einer neuen und zeiteffizienten Syntheseroute dargestellt werden. Hierbei kann die Verknüpfungsdimension der resultierenden Produkte abhängig von verschiedenen Reaktionsparametern, die den Energieeintrags der Kugelmühle beeinflussen, gesteuert werden. N2 - The thesis at hand deals with the synthesis and characterization of 23 novel multi-functional composite materials that are based on lanthanide containing compounds as well as different nano- and microparticles. The synthesized compounds can be described as core/shell systems with a nanoparticle and microparticle containing core, respectively, and a lanthanide containing shell. Due to their composite character, the materials combine the specific properties of their single constituents such as luminescence, superparamagnetism or reflection properties. For the synthesis of multifunctional luminescent materials, zirconyl containing, lumines-cent nanoparticles were modified with lanthanide chlorides as well as lanthanide con-taining MOFs. The composite materials LnCl3@ZrO(FMN) (FMN = flavin mononucleo-tide, Ln = Y, Sc, La, Eu, Tb, Ho) enable a modification of the materials’ luminescence properties in dependence on the reaction temperature and the particular rare earth ion. Variation of the nanoparticle component leads on the one hand to formation of the sys-tem LnCl3@ZrO(MFP) (MFP = methylfluorescein phosphate), which exhibits a strong solvatochromic effect, and on the other hand to the composite YCl3@ZrO(RP) (RP = resorufin phosphate), which makes another chromaticity of the luminescence ac-cessible. The modification of ZrO(FMN) and ZrO(MFP) nanoparticles with 3∞[Eu2(BDC)3]· 2DMF·2H2O (BDC2- = benzene-1,4-dicarboxylate) results in composite materials that combine two luminescence processes with a different chromaticity and a diverse excita-tion range. Therefore, a continuous and reversible switching between both processes can be executed by variation of the excitation wavelength. For the synthesis of luminomagnetic materials, superparamagnetic Fe3O4/SiO2 micro-particles were modified with a variety of lanthanide containing MOFs that differ in terms of their luminescence properties and their water and air stability. For this purpose, the MOFs 2∞[Ln2Cl6(Bipy)3]·2Bipy (Bipy = 4,4’-Bipyridine, Ln = Nd, Sm, Eu, Tb, Er), 3∞[Eu(Im)2], 3∞[Ba0.95Eu0.05(Im)2] (Im- = imidazolate) and 3∞[Eu2(BDC)3]·2DMF·2H2O were employed for microparticle functionalization. By variation of the selected MOF or a combination of two different compounds, the luminescence properties of the composite materials could be adjusted in the whole visible spectral region as well as in the NIR region. The synthesized luminomagnetic composite materials with water sensitive MOFs can be applied for the detection of water in various organic solvents. Therefore, such compo-sites can be used as alternative to the Karl-Fischer titration that is easy applicable, mo-bile and exhibits similar detection limits. The composite materials 2∞[Eu2Cl6(Bipy)3]· 2Bipy@Fe3O4/SiO2 and 2∞[Eu2Cl6(Bipy)3]·2Bipy,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 can be deployed as optical turn-off sensors, while the composite system 3∞[Eu2(BDC)3]· 2DMF·2H2O,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 is suitable for a ratiometric determina-tion of the water content. As alternative to spherical particles, anisotropic rod-like Fe3O4/SiO2 microparticles were functionalized with 3∞[Eu2(BDC)3]·2DMF·2H2O. The resulting composite material com-bines the isotropic luminescence of the MOF shell with the anisotropic reflection of visible light of the microparticle component. A continuous and reversible switching between both optical properties is enabled by the variation of the excitation wavelength and the direction of an external magnetic field. The mechanochemical reaction of the MOF precursors [LnCl3(Py)4]·0.5Py (Ln = Eu, Ho) and 4,4’-bipyridine leads to a variety of lanthanide containing complexes and coordina-tion polymers that have already been reported in literature. Thus, a novel and time effi-cient synthesis route could be described for an alternative preparation of these com-pounds. The dimensionality of the resulting substances can be influenced in dependence on different reaction parameters that have an influence on the application of energy by the ball mill. KW - Photolumineszenz KW - Metallorganisches Netzwerk KW - Superparamagnetismus KW - Mikropartikel KW - Nanopartikel KW - Kompositmaterialien KW - Lumineszenzsensor KW - Luminomagnetische Partikel Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-158186 ER - TY - THES A1 - Weber, Manuel T1 - Synthese, Charakterisierung und Eigenschaften neuartiger carboranyl-substituierter NHC-Liganden und Anwendung in der Metallkomplex-Chemie T1 - Synthesis, characterisation and properties of novel carboranyl-substituted NHC ligands and application in metal complex chemistry N2 - Im Fokus der Dissertation stand die Synthese von Vorstufen (Imidazoliumsalze) für NHC-Liganden sowie die Umsetzung dieser Verbindungen zu N-heterocyclischen Carbenen unter Verwendung des Carba-closo-dodecaborat-Anions. Hierbei wurde der Cluster über die Position B12 oder B7 an das Stickstoffatome des Imidazols gebunden. Zur Synthese wurden unterschiedliche Routen ausgehend von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(12-PhI-closo-1-CB_{11}H_{11}\) sowie den entsprechenden 7-Isomeren untersucht und miteinander verglichen. Die isomerenreinen Synthesen wurden hinsichtlich ihrer Vor- und Nachteile untersucht und so optimiert. Es wurden sowohl unsymmetrische Imidazoliumsalze mit dem Carba-closo-dodecaborat-Anion auf der einen Seite und Alkyl- oder Arylreste (Butyl, Methyl, Phenyl, p-Methoxyphenyl, p-Fluorphenyl-, Vinyl-, Benzyl- und Mesitylsubstituenten) als auch die symmetrische Variante mit zwei Carboranylcluster synthetisiert. Besonders hervorzuheben ist hierbei, dass die Synthese des Bis(1,3-Carboran-12-yl)imidazolatanions in einer Buchwald-Hartwig-Kreuzkupplungsreaktion durch Umsetzung der Reagenzien \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}]\) durch 1 zu 1 Umsetzung miteinander reagiert haben. In den meisten bisher literaturbekannten und im Rahmen der Doktorarbeit untersuchten Buchwald-Hartwig-Kreuzkupplungsreaktionen sind 4-14 Äquivalente des Amins notwendig. Darüberhinaus erfordert das Amin häufig eine Aktivierung durch Umsetzung zu Lithiumorganylen. Dies war bei der Umsetzung von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) mit \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}] \) nicht notwendig und zeigt den starken elektronenschiebenden Effekt des Clusters auf. Die unsymmetrischen Imidazoliumsalze konnten durch Umsetzung mit n-Butyllithium zu C2-NHC-Derivate umgesetzt werden. Bei der Umsetzung des Bis(1,3-Carboran-12-yl)imidazolatanions bildete sich zunächst ein Gemisch aus dem C2- und C5-Isomer, des Weiteren ist anteilig auch die Deprotonierung am Clusterkohlenstoffatom aufgetreten. N2 - The dissertation focused on the synthesis of precursors (imidazolium salts) for NHC ligands and the conversion of these compounds to N-heterocyclic carbenes using the carba-closo-dodecaborate anion. Here, the cluster was attached to the nitrogen atom of the imidazole via the B12 or B7 position. For synthesis, different routes starting from \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(12-PhI-closo-1-CB_{11}H_{11}\) as well as the corresponding 7-isomers were investigated and compared. The isomerically pure syntheses were investigated with respect to their advantages and disadvantages and thus optimised. Both asymmetric imidazolium salts with the carba-closo-dodecaborate anion on one side and alkyl or aryl residues (butyl, methyl, phenyl, p-methoxyphenyl, p-fluorophenyl, vinyl, benzyl and mesityl substituents) and the symmetric variant with two carboranyl clusters were synthesised. Of particular note here is that the synthesis of the bis(1,3-carboran-12-yl)imidazolate anion was achieved in a Buchwald-Hartwig cross-coupling reaction by reacting the reagents \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11}]\) by 1 to 1 reaction. In most of the Buchwald-Hartwig cross-coupling reactions known so far in the literature and investigated in the doctoral thesis, 4-14 equivalents of the amine are required. Furthermore, the amine often requires activation by conversion to lithium organyls. This was not necessary in the reaction of \(Cs[12-I-closo-1-CB_{11}H_{11}]\) with \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11})\), demonstrating the strong electron-pushing effect of the cluster. The unsymmetrical imidazolium salts could be converted to C2-NHC derivatives by reaction with n-butyllithium. During the reaction of the bis(1,3-carboran-12-yl)imidazolate anion, a mixture of the C2 and C5 isomer was initially formed, and furthermore, deprotonation also occurred proportionally at the cluster carbon atom. KW - NHC KW - N-Heterocyclische Carbene KW - Carboranylsubstituierte NHC KW - NHC-Gold(I)-Komplexe KW - NHC-Selenkomplexe KW - Imidazolatsalze KW - Imidazoliumsalze Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258143 ER - TY - THES A1 - Walfort, Bernhard T1 - Novel dianionic sulfur ylides and related compounds T1 - Neuartige dianionische Schwefelylide und verwandte Verbindungen N2 - Priority task of the thesis was to replace oxygen atoms in sulfur oxoanions SOnm– or imido groups in sulfur polyimido anions S(NR)nm– isoelectronically by R2C-methylene groups. This would open a wide avenue to new target molecules containing a formally double bonded carbon next to formally double bonded nitrogen atoms in highly charged sulfur-centred anions like S(CR2)x(NR)ym–. They clearly are reminiscent to sulfur ylides. Both, alkylendiimidosulfites and alkylentriimidosulfates are accessible via deprotonaton of the corresponding alkyldiimidosulfinates and alkyltriimidosulfonates with methyllithium. The reactivity of the novel compounds is dominated by the carbanionic centre. Addition reactions to another SN formal doubble bond are feasible and are leading to the yet unknown imidoanalogues compounds alkyl-bis-(diimidosulfinates) and alkyl-bis-(triimidosulfonates). N2 - Der Schwerpunkt der Arbeit lag in dem isoelektronischen Ersatz der Sauerstoffatome in Schwefeloxoanionen SOnm- oder der Imidogruppen in Schwefelpolyimidoanionen durch eine R2C-methylen Gruppe. Diese Moleküle besitzen neben einer formalen SC-Doppelbindung eine SN-Doppelbindung mit einem stark positiv geladenem Schwefelatom als Zentrum S(CR2)x(NR)ym–. Diese Verbindungen enthalten analog der bekannten Sulfonium- und Sulfoxoniumylide einen positiv geladenen Schwefel nebst einem negativ geladenen Kohlenstoff. Sowohl die Alkylendiimidosulfite als auch die Alkylentriimidosulfate sind mittels Deprotonierung des alpha-Kohlenstoffatoms in Alkyldiimidosulfinaten und Alkyltriimidosulfonaten mit Methyllithium erhältlich. Die Reaktivität dieser neuartigen Verbindungen wird durch das carbanionische Kohlenstoffatom bestimmt. Additionsreaktionen dieser verbindungen an eine formale SN-Doppelbindung sind möglich und führen zu den bis dahin unbekannten Imidoanalogen Verbindungen, Alkyl-bis-(diimidosulfinat) und Alkyl-bis-(triimidosulfonat). KW - Schwefelylide KW - Übergangsmetallverbindungen KW - Schwefelylide KW - Polyimidoanionen KW - Sulfit KW - Sulfat KW - Sulfur Ylides KW - Polyimido Anions KW - Sulfite KW - Sulfate Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1181274 ER -